3-862-098-12 (1)
CD/DVD Pla ye r
EN
C1
C2
C2
Operating Instructions
C1
C2
DVP-M35
1998 by Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
This Player Can Play the Following Discs................................................................ 4
Getting Started
Unpacking ............................................................................................................................. 6
Hooking Up the System ...................................................................................................... 6
Necessary Setup Before Using the Player ........................................................................ 9
Selecting the Language for On-screen Display ............................................................... 9
Basic Operations
Playing a DVD....................................................................................................................... 10
Playing a CD/VIDEO CD................................................................................................... 14
Playing Discs in Various Modes
Using the On-Screen Display .......................................................................................... 18
Using the Front Panel Display ........................................................................................ 20
Playing Repeatedly (Repeat Play) .................................................................................. 22
Playing in Random Order (Shuffle Play) ...................................................................... 24
Creating Your Own Program (Program Play) .............................................................. 24
Resuming Playback from the Point Where You Stopped a Disc (Resume Play)..... 26
Reducing the Picture Noise (DNR: Digital Video Noise Reduction) ........................ 26
Changing the Sounds ....................................................................................................... 27
Displaying the Subtitles ................................................................................................... 28
Changing the Angles ........................................................................................................ 29
Limiting Playback by Children (Parental Control) ...................................................... 29
Controlling the TV or the AV Amplifier (Receiver) with the Supplied Remote ..... 32
EN
Settings and Adjustments
Using the Setup display ................................................................................................... 34
Setting the Language for Display and Sound (LANGUAGE SETUP) ...................... 35
Settings for Display (INITIAL SETUP 1) ....................................................................... 36
Settings for Sound (INITIAL SETUP 2) ......................................................................... 37
Additional Information
Precautions ........................................................................................................................ 38
Notes on Discs ................................................................................................................... 38
Troubleshooting ................................................................................................................ 39
Self-diagnosis function ..................................................................................................... 41
Specifications ..................................................................................................................... 42
Glossary .............................................................................................................................. 42
Index to Parts and Controls ............................................................................................. 44
Setup Display Item List .................................................................................................... 47
Language Code List .......................................................................................................... 48
Index.......................................................................................................................................... 49
3EN
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
The instructions in this manual are for model DVP-M35.
Icon
Meaning
Indicates that you can use only the remote
to do the task.
Conventions
Z
•
•
Instructions in this manual describe the controls on the
player.
Indicates tips and hints for making the task
easier.
You can also use the controls on the remote if they have
the same or similar names as those on the player.
The icons on the right are used in this manual:
z
Indicates the functions for DVD VIDEOs.
Indicates the functions for VIDEO CDs.
Indicates the functions for Audio CDs.
This Player Can Play the Following Discs
DVD VIDEOs
VIDEO CDs
Audio CDs
Disc logo
Contents
Disc size
Audio + Video
Audio + Video
Audio
12 cm
8 cm
12 cm
8 cm
12 cm
8 cm
(CD single)
Play time
About 4 h (for
single-sided
DVD)/
about 8 h (for
double-sided
DVD)
About 80 min.
(for
single-sided
DVD)/
about 160 min.
(for
74 min.
20 min.
74 min.
20 min.
double-sided
DVD)
“DVD VIDEO” logo is a trademark.
This player switches the color system, PAL or NTSC, according to the connected TV. (For details, see page 9.)
Region code of DVDs you can play on this unit
Your DVD player has a region code printed on the back of the unit and w ill only play DVDs
X
Region code
MODEL NO.
that are labeled w ith identical region codes.
DVP–8306
CD/DVD PLAYER
AC 110V 60Hz
22W
NO.
ALL
DVDs labeled
will also play on this unit.
SONY CORPORATION
MADE IN JAPAN
3-444-464-01
If you try to play any other DVD, the message “Playing this disc prohibited by area limits.” will
appear on the TV screen.
Depending on the DVD, no region code indication may be labeled even though playing the DVD is prohibited by the area limits.
Note on playback operations of DVDs and VIDEO CDs
Some playback operations of DVDs and VIDEO CDs may be intentionally fixed by software producers. Since this player plays
DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be
available. Also refer to the instructions supplied with the DVDs or VIDEO CDs.
4EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Te rm s fo r d iscs
• Title
The longest sections of a picture or a music piece on a DVD;
a movie, etc, for a picture piece on a video software; or an
album, etc, for a music piece on an audio software. Each
title is assigned a title number enabling you to locate the
title you want.
• Chapter
Sections of a picture or a music piece that are smaller than
titles. A title is composed of several chapters. Each chapter
is assigned a chapter number enabling you to locate the
chapter you want. Depending on the disc, no chapters may
be recorded.
• Track
Sections of a picture or a music piece on a VIDEO CD or a
CD. Each track is assigned a track number enabling you to
locate the track you want.
DVD
Disc
st ru ct u re
Title
Chapter
Track
Disc
VIDEO CD
o r CD
st ru ct u re
Index
• Index (CD) / Video Index (VIDEO CD)
A number that divides a track some sections to easily locate
the point you want on a VIDEO CD or a CD. Depending
on the disc, no indexes may be recorded.
• Scene
On a VIDEO CD with PBC functions, the menu screens,
moving pictures and still pictures are divided into sections
called “scenes.” Each scene is assigned a scene number
enabling you to locate the scene you want.
Note on PBC (Playback Control) (VIDEO CDs)
This player conforms to Ver. 1.1 and Ver. 2.0 of VIDEO CD
standards. You can enjoy two kinds of playback according to
the disc type.
Disc type
You can
VIDEO CDs
without PBC
functions
Enjoy video playback (moving
pictures) as well as music.
(Ver. 1.1 discs)
VIDEO CDs
with PBC
functions
Play interactive software using menu
screens displayed on the TV screen
(PBC Playback), in addition to the
video playback functions of Ver 1.1
discs. Moreover, you can play high-
resolution still pictures, if they are
included on the disc.
(Ver. 2.0 discs)
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Discs t h a t t h e p la ye r ca n n o t p la y
The player cannot play discs other than the ones listed in the
table on page 4. CD-ROMs including PHOTO CDs, data
sections in CD-EXTRAs and DVD-ROMs, etc. can not be
played.
5EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
Unpacking
Hooking Up the System
Check that you have the following items:
• Audio/ Video connecting cord (1)
• S video cable (1)
• Remote commander (remote) RMT-D102E (1)
• Size AA (R6) batteries (2)
Overview
This section describes how to hook up the CD/ DVD
player to a TV (with audio/ video input jacks) and/ or
an amplifier. You cannot connect this player to a TV
without a video input connector. Be sure to turn off
the pow er of each component before making the
connections.
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
– on the batteries. When using the remote, point it at
the remote sensor g on the player.
pTo listen to the sound through TV speakers
CD/DVD player
To VIDEO
OUT
To AUDIO
OUT
To an AC outlet
TV
To video
input
To audio
input
zYou can control Sony TVs and AV amplifiers using the
: Signal flow
supplied remote
To an AC outlet
See page 32.
pTo listen to the sound through speakers connected to
an amplifier
Notes
•
•
•
•
Do not leave the remote in an extremely hot or humid
place.
CD/DVD player
Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
To
To
AUDIO
OUT
OUT
To an AC
outlet
VIDEO
TV
To video input
To audio
input
Amplifier
(Receiver)
To an AC outlet
: Signal flow
To an AC outlet
6EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
What cords will I need?
Notes
• Do not connect this
player to a video deck.
If you view the pictures
on your TV after
making the connections
shown on the right, a
picture noise may
appear.
Audio/ Video connecting cord (supplied) (1)
Video deck
TV
Yellow
Yellow
White (L)
White (L)
Red (R)
CD/DVD
player
Red (R)
Connect
directly
Hookups
• Depending on the TV or amplifier, sound distortion may
occur because the audio output level is high. In this case,
set “AUDIO ATT” in “INITIAL SETUP 2” to “ON” in the
setup display. For details, see page 37.
When connecting the cords, be sure to match the color-
coded cord to the appropriate jacks on the components:
Yellow (video) to Yellow, Red (right) to Red and White
(left) to White. Be sure to make connections firmly to
avoid hum and noise.
zIf your TV has an S video input connector
Connect the component via the S VIDEO OUT connector
using the S video cable (supplied) instead of the video
connecting cord. You will get a better picture.
pTo listen to the sound through TV speakers
Connect the TV using the audio/ video connecting
cord (supplied).
S video cable (supplied)
TV
CD/DVD player
INPUT
CD/DVD player
TV
R–AUDIO 1–L
VIDEO 1
S VIDEO IN
VIDEO
1
L
R–AUDIO 2–L
VIDEO 2
2
AUDIO
R
LINE OUT
S VIDEO OUT
(Continued)
pTo listen to the sound through speakers connected to
an amplifier
Connect the TV using a video connecting cord (not
supplied), and the amplifier using an audio
connecting cable (not supplied).
TV
CD/DVD player
INPUT
R–AUDIO 1–L
VIDEO 1
VIDEO
L
R–AUDIO 2–L
VIDEO 2
AUDIO
LINE OUT
R
Amplifier*
CD
L
R
* Make the same connections when your amplifier conforms
to “Pro Logic.”
7EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
zIf you have a digital component such as an amplifier zIf you have a digital component with a built-in Dolby
with a digital connector, DAT or MD
Digital decoder
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connectiong cord (not supplied). When the component
with a built-in Dolby Digital decoder is connected, the
player plays DVDs with sound recorded in Dolby Digital
(AC-3) format while producing the effect of being in a
movie theater or a concert hall.
When you play a DVD, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “PCM” in the setup display. (page 37)
pWhen using an optical digital connectiong cord
In the setup display, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “DOLBY DIGITAL/PCM.” (page 37)
Optical digital connectiong cord
(not supplied)
pWhen using an optical digital connectiong cord
Optical digital connectiong cord
Take off the cap and plug in the optical digital
connectiong cord.
(not supplied)
Amplifier w ith a
digital connector, MD
deck, DAT deck, etc.
Take off the cap and plug in the optical digital
connectiong cord.
CD/DVD player
OPTICAL
COAXIAL
DIGITAL IN
Component w ith a
built-in Dolby Digital
CD/DVD player
OPTICAL
decoder
PCM/
DOLBY DIGITAL (AC-3)
OPTICAL
COAXIAL
DIGITAL IN
DIGITAL OUT
OPTICAL
PCM/
pWhen using a coaxial digital connectiong cord
DOLBY DIGITAL (AC-3)
DIGITAL OUT
Coaxial digital connectiong cord
pWhen using a coaxial digital connectiong cord
(not supplied)
Amplifier w ith a
digital connector, MD
Coaxial digital connectiong cord
CD/DVD player
deck, DAT deck, etc.
(not supplied)
OPTICAL
COAXIAL
DIGITAL IN
Component w ith a
built-in Dolby Digital
decoder
COAXIAL
CD/DVD player
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
OPTICAL
COAXIAL
DIGITAL IN
Notes
COAXIAL
•
Refer to the instructions supplied with the component
PCM/
to be connected.
DOLBY DIGITAL (AC-3)
DIGITAL OUT
•
You cannot make digital audio recordings of discs
recorded in Dolby* Digital (AC-3) format directly
using an MD deck or DAT deck.
Note
Refer to the instructions supplied with the component to
be connected.
When you make the connections above, do not set
“DIGITAL OUT” in “INITIAL SETUP 2” to “DOLBY
DIGITAL/PCM.” If you do, a loud noise w ill
suddenly come out from the speakers, affecting
your ears or causing the speakers to be damaged.
* Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol a are
trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby
Laboratories, Inc. All rights reserved.
8EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
Necessary Setup Before Using
the Player
Selecting the Language for
On-screen Display
Some setups are necessary for the player depending on
the TV or other components to be connected.
For details on using the setup display, see page 34.
For details on each setup display item, see pages 35 to
37.
You can select the language for the setup display or the
messages displayed on the screen. Default setting is
“ENGLISH.”
pIf the color system of the TV is PAL or DUAL
Since the color system of the unit is set to PAL, you can
use the unit as it is.
SET UP
ENTER
pIf the color system of the TV is NTSC
To set the TV to NTSC, turn on the unit while pressing
the ∏ button of the unit. To reset to PAL, turn off the unit
and then turn on as described above.
?/>/.//
pTo connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “INITIAL SETUP
1” to “16:9.” This is default setting.
1
Press SET UP and select “
then press ENTER.
” using ?/ /, and
pTo connect the player to a normal TV
In the setup display, set “TV TYPE” in “INITIAL SETUP
1” to “4:3 LETTER BOX” or “4:3 PAN SCAN.” For
details, see page 36.
1
2
LANGUAGE SETUP
pTo listen to the sound through speakers connected to
an amplifier with a digital connector or to output the
sound to a digital component such as a DAT or MD deck
When you play a DVD, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “PCM” in the setup display. This is default
setting.
OSD:
DVD MENU:
AUDIO:
ENGLISH
ENGLISH
ORIGINAL
SUBTITLE:
AUDIO FOLLOW
2
3
Select “OSD” using >/ ., then press / or ENTER.
pTo connect the player to a digital component with a
built-in Dolby Digital decoder
1
2
LANGUAGE SETUP
In the setup display, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “DOLBY DIGITAL/ PCM.”
OSD:
DVD MENU:
AUDIO:
ENGLISH
CH I NESE
ORIGINAL
Use the setup display to change the various settings for
the picture and sound.
For details, see page 34.
SUBTITLE:
AUDIO FOLLOW
Select the language you want using >/ ., then
press ENTER.
To cancel using the setup display on the way
Press SET UP.
Note
The languages you can select are the ones displayed in step 2.
For details, see page 35.
9EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
Pla yin g a DVD
2
3 4
Connect headphones.
Adjust the headphone
volume.
• The operating procedure of CDs
or VIDEO CDs is different from
that of DVDs.
Make settings on your TV.
Turn on the TV and select the video input so that you can view
the pictures from this player.
1
For details, see pages 14 to 17.
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
zYou can turn on the player
using the remote
Press POWER when the
indicator above the POWER
button on the front panel is
lit in red.
Press POWER to turn on the player.
2
3
The indicator (red) above the POWER button changes to green
and the front panel display lights up.
Press §, and place the disc on the disc tray.
zAfter following Step 4
A DVD menu or title menu
may appear on the TV screen
(see page 13).
Notes
• If you use an FM/ AM tuner by
the player, turn off the player.
• If you leave the player or the
remote in pause mode for 15
minutes, the screen saver
image appears automatically.
To disappear the screen saver,
press ·. (If you want to set
the screen saver function to off,
see page 36.)
• If you don’t operate the player
or the remote for more than 30
minutes when a disc is not
being played, the power is
automatically turned off (Auto
Power Off function.)
With the playback
side facing dow n
Press ·.
4
The disc tray closes, and the player starts playback (Continuous
Play). Adjust the volume on the TV or the amplifier.
Depending on the DVD, some operations may be different or restricted. Refer to the instructions supplied with
your disc.
10EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
zWhen “RESUME” appears on
the front panel display
6
You can resume playback
from the point where you
stopped the DVD (page 26).
To play from the beginning
of the disc, see page 26.
1
4
7
2
5
8
0
3
6
9
Number buttons
SEARCH MODE
CLEAR
ENTER
Note
You may not be able to do
Resume Play depending on the
DVD.
=/+
·
p
P
=/+
·
∏
ENTER
§
p
ENTER
zWhat are chapter and title?
Press
p
To
See page 5.
Stop
Pause
Notes
P
Depending on the DVD, you may
not be able to do some of the
operations described on the right.
Por ·
+
Resume play after pause
Go to the next chapter in
Continuous Play mode
zEach time you press SEARCH
MODE
=
Go back to the preceding
chapter in Continuous Play
mode
“CHAPTER SEARCH,”
“TITLE SEARCH” and
“TIME SEARCH” appear on
the TV screen.
1 SEARCH MODE repeatedly until “CHAPTER
SEARCH” appears on the TV screen.
Select the chapter
2 Number buttons to select the chapter number,
then ENTER or ·.
1 SEARCH MODE repeatedly until “TITLE
SEARCH” appears on the TV screen.
Select the title
2 Number buttons to select the title number, then
ENTER or ·.
1 SEARCH MODE repeatedly until “TIME
SEARCH” appears on the TV screen.
Locate a point using the time code
Stop play and remove the disc
2 Number buttons to enter a time code, then
ENTER or ·.
6
If you have made a mistake when you press the number button
Press CLEAR, then the correct number button.
11EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
To play at various speeds/frame-by-frame
Using the click shuttle and the JOG button/ indicator, you can
playback a DVD with various speed or frame-by-frame. Each time you
press JOG, it changes between shuttle mode and jog mode.
JOG
Click shuttle
JOG
Click shuttle
pTo change the playback speed (Shuttle mode)
Turn the click shuttle. The playback speed changes depending on the turning
direction and angle as follows:
Notes
• Depending on the DVD, you
may not be able to do some of
the operations described on the
right.
FF2)(about 30 times the normal speed)
<
FF1)(about 10 times the normal speed)
<
• When you play back a DVD at
twice the normal speed in
either direction, the sounds of
the picture will come out from
the LINE OUT (AUDIO 1, 2)
connectors. The sounds are
lower than the ones at normal
speed. In this case, no sounds
come out from the DIGITAL
OUT OPTICAL and COAXIAL
connectors.
×2”(about twice the normal speed)
<
PLAY((Normal speed)
<
SLOW1&(playback direction)
<
SLOW2&(playback direction
– slower than “SLOW1&”)
<
PAUSE P
<
&
SLOW2
(opposite direction
&
– slower than “SLOW1 ”)
<
SLOW1
<
&
(opposite direction)
×2“(about twice the normal speed : opposite direction)
<
FR10(about 10 times the normal speed)
<
FR20(about 30 times the normal speed)
If you turn the click shuttle quickly, the playback speed goes to FF2/ FR2 at
once.
Notes
• The JOG indicator shows the
mode of the click shuttle close
to the indicator only. When the
indicator on the remote does
not light up, it keeps shuttle
mode on the remote even if the
indicator on the player lights
up.
• If you don’t operate the click
shuttle for about 20 seconds
after pressing JOG, it returns to
shuttle mode on the remote.
On the player, it keeps jog
mode.
pTo play the DVDs frame-by-frame changing the playback speed (Jog mode)
1
Press JOG.
The JOG button lights up during jog mode. When you press JOG, the
playback is paused.
2
Turn the click shuttle.
Depending on the turning speed, the playback goes to frame-by-frame toward
the turning direction of the click shuttle. If you turn the click shuttle with
constant speed for a while, the playback speed goes to slow or normal.
To return to Continuous Play
Press ·.
12EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
Notes
Using the Title Menu
• Depending on the DVD, you
may not be able to select the
title.
• Depending on the DVD, a “title
menu” may simply be called a
“menu” or “title ” in the
instructions supplied with the
disc. “Press ENTER.” may also
be expressed as “Press
SELECT.”
A DVD is divided into long sections of a picture or a music piece
called “titles.” When you play the DVD which contains several titles,
you can select the title you want using the title menu.
ENTER
?/>/.//
DVD MENU
TITLE
ENTER
?/>/.//
TITLE
DVD MENU
Press TITLE.
1
2
3
The title menu appears on the TV screen. The contents of the
menu varies from disc to disc.
Press ?/ >/ ./ / to select the title you want to play.
Depending on the disc, you can use the number buttons to
select the title.
Press ENTER.
The player starts playing the selected title.
zIf you want to select the
language for the DVD menu
Change the setting using
“LANGUAGE SETUP” in
the setup display (see page
35).
Using the DVD menu
Some DVDs allow you to select the disc contents using the menu.
When you play these DVDs, you can select the language for the sub-
titles, the language for the sound, etc., using the DVD menu.
Press DVD MENU.
Note
1
Depending on the DVD, a “DVD
menu” may simply be called a
“menu” in the instructions
supplied with the disc.
The DVD menu appears on the TV screen. The contents of the
menu vary from disc to disc.
Press ?/ >/ ./ / to select the item you want to change.
2
Depending on the disc, you can use the number buttons to
select the item.
To change other items, repeat Step 2.
3
Press ENTER.
4
13EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
Pla yin g a CD/VIDEO CD
2
3 4
Connect headphones.
Adjust the headphone
volume.
• The operating procedure of DVDs
is different from that of CDs or
VIDEO CDs.
Make settings on your TV.
Turn on the TV and select the video input so that you can view
the pictures from this player.
1
For details, see pages 10 to 13.
zYou can turn on the player
using the remote
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
Press POWER when the
indicator above the POWER
button on the front panel is
lit in red.
Press POWER to turn on the player.
2
3
The indicator (red) above the POWER button changes to green
and the front panel display lights up.
zAfter following Step 4
The menu screen may
appear on the TV screen
depending on the VIDEO
CD. You can play the disc
interactively, following the
instructions on the menu
screen. (PBC Playback, see
page 17.)
Press §, and place the disc on the disc tray.
Notes
• If you use an FM/ AM tuner by
the player, turn off the player.
• If you leave the player or the
remote in pause mode for 15
minutes, the screen saver
image appears automatically.
To disappear the screen saver,
press ·. (If you want to set
the screen saver function to off,
see page 36.)
With the label side
facing up
Press ·.
4
The disc tray closes and the player starts playback (Continuous
Play). Adjust the volume on the TV or the amplifier.
• If you don’t operate the player
or the remote for more than 30
minutes when a disc is not
being played, the power is
automatically turned off (Auto
Power Off function.)
Depending on the VIDEO CD, some operations may be different or restricted.
Refer to the instructions supplied with your disc.
14EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
zWhen “RESUME” appears on
the front panel display
6
You can resume playback
from the point where you
stopped the CD/ VIDEO CD
(page 26).
To play from the beginning
of the disc, see page 26.
1
4
7
2
5
8
0
3
6
9
Number buttons
SEARCH MODE
CLEAR
ENTER
C/c
=/+
·
P
p
§ ·
p
=/+
∏
ENTER
ENTER
zWhat is a track?
To
Press
See page 5.
Stop
p
zWhat is an index?
Pause
P
See page 5.
Resume play after pause
Por ·
+
Go to the next track in
Continuous Play mode
zWhat is a scene?
See page 5.
Go back to the preceding
track in Continuous Play
mode
=
zIf you want to change the
search mode
Press SEARCH MODE. Each
time you press in case of a
VIDEO CD, “SCENE
Go to the next index
c
C
Go back to the preceding
index
SEARCH,” “TRACK
SEARCH” and “V. INDEX
SEARCH” appear on the TV
screen. In case of a CD, only
“TRACK SEARCH” appears.
Select the track
1 SEARCH MODE repeatedly until “TRACK
SEARCH” appears on the TV screen.
2 Number buttons to select the track number,
then ENTER or ·.
1 SEARCH MODE repeatedly until “SCENE
SEARCH” appears on the TV screen.
Select the scene before you start
playing a VIDEO CD with PBC
functions and during PBC playback
(Scene Search)
Note
Some discs do not allow you to
start playing from a particular
scene. In this case, if you do
Scene Search before you start
playing, the player starts playing
from scene 1. If you do Scene
Search while playing a disc, the
player starts playing from the
current scene.
2 Number buttons to select the scene number,
then ENTER or ·. (To check the current scene
number, press DISPLAY. The scene number
appears at the left top of the TV screen.)
6
Stop play and remove the disc
If you have made a mistake when you press the number button
Press CLEAR, then the correct number button.
15EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
To play at various speeds / frame-by-frame
Using the click shuttle and the JOG button/ indicator, you can
playback a CD/ VIDEO CD with various speed or frame-by-frame.
Each time you press JOG, it changes between shuttle mode and jog
mode.
JOG
Click shuttle
JOG
Click shuttle
Notes
• Depending on the VIDEO CD,
you may not do some of the
operations described on the
right.
pTo change the playback speed (Shuttle mode)
Turn the click shuttle. The playback speed changes depending on the turning
direction and angle as follows:
• When you play a VIDEO CD,
there is no sound except for the
playback at normal speed.
FF2)(Faster than “FF1)”)
<
FF1)
<
×2”(about twice the normal speed)
<
PLAY((Normal speed)
<
SLOW1&(playback direction)
– VIDEO CD Only –
<
SLOW2&(playback direction
– Slower than “SLOW1&”)
– VIDEO CD Only –
<
PAUSE P
<
Notes
FR10
• The JOG indicator shows the
mode of the click shuttle close
to the indicator only. When the
indicator on the remote does
not light up, it keeps shuttle
mode on the remote even if the
indicator on the player lights
up.
• If you don’t operate the click
shuttle for about 20 seconds
after pressing JOG, it returns to
shuttle mode on the remote.
On the player, it keeps jog
mode.
<
FR20(Faster than “FR10”)
If you turn the click shuttle quickly, the playback speed goes to FF2/ FR2 at
once.
pTo play the VIDEO CDs frame-by-frame changing the playback speed (Jog mode –
VIDEO CD Only)
1
2
Press JOG.
The JOG button lights up during jog mode. When you press JOG, the
playback is paused.
Turn the click shuttle.
Depending on the turning speed, the playback goes to frame-by-frame toward
the playback direction only. If you turn the click shuttle with constant speed for
a while, the playback speed goes to slow or normal.
To return to Continuous Play
Press ·.
16EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra t io n s
zWhen playing VIDEO CDs with
PBC functions
Playing VIDEO CDs w ith PBC Functions (PBC Playback –
VIDEO CD Only)
PBC playback starts
automatically.
When playing VIDEO CDs with PBC functions (Ver. 2.0 discs), you
can enjoy simple interactive operations, operations with search
functions, etc.
PBC Playback allows you to play VIDEO CDs interactively, following
the menu screen on the TV screen.
On this player, you can use the number buttons, ENTER or
·/ SELECT, =, +, >/ . and ˆ(RETURN) during PBC
Playback.
zTo cancel PBC playback of a
VIDEO CD with PBC functions
and play the disc in
Continuous Play mode
There are two ways.
• Before you start playing,
select the track you want
using =or +, then
press ENTER or ·.
• Before you start playing,
select the track number
using the number buttons
on the remote, then press
ENTER or ·.
“Play without PBC” appears
on the TV screen and the
player starts Continuous
Play. You cannot play still
pictures such as a menu
screen.
1
4
7
2
5
8
0
3
6
9
Number
buttons
ENTER
=/+
·/SELECT
ˆ
ˆ
(RETURN)
=/+
To return to PBC playback,
press ptwice then press ·.
·>/.
ENTER
(RETURN)
ENTER
>/.
Note
Depending on the VIDEO CD,
“Press ENTER” in Step 3 may be
expressed as “Press SELECT” in
the instructions supplied with the
disc.
Start playing a VIDEO CD with PBC functions, following Steps
1 to 4 in “Playing a CD/ VIDEO CD” on page 14.
1
2
Select the item number you want.
On the player
Press >/ . to select the item number.
On the remote
Press the number button of the item you want.
Press ENTER or ·/ SELECT.
3
4
Follow the instructions on the menu screen for interactive
operations.
Refer to the instructions supplied with the disc, as the operating
procedure may differ according to the VIDEO CD.
Going back to the menu screen
Press ˆ, =, or +.
17EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
pDisplay information of the on-screen display 2 mode
Using the On-Screen Display
Z
Playing time
Current title
number (total
Current chapter
number (total
number of
of the current
chapter*
number of titles)
Playing
status
chapters in the
current title)
You can check the operating status of the player and
the information about the disc using the on-screen
display on the TV screen.
Disc type
DVD
PLAY
1 : 32 : 55
CHAPTER
<
>
DISPLAY
Current
TITLE:
32 ( 50 )
language for
the sound
(total
number of
languages
for the
CHAPTER: 30 ( 50 )
SUBTITLE: ENGLISH ( 32 )
1
4
7
2
5
8
0
3
6
9
AUDIO:
ENGLISH ( 8 )
DOLBY DIGITAL
3 / 2. 1
TIME
ANGLE:
DNR:
1 ( 9 )
0
sound)
PAL
Current
Selected angle
(total number of
angles)
language for the
subtitles (total
number of
languages for
subtitles)
Current
color
system
Current audio
format**
When playing back or stopping a DVD
Current
DNR value
Press DISPLAY.
Note
Some information may not be displayed depending on a
DVD.
Each time you press the DISPLAY button, the on-
screen display changes as follows:
* In display 1 or 2 mode, each time you press TIME the
On-screen display 1?
information changes as shown below.
.
On-screen display 2
Playing time of the current chapter
?
.
.
On-screen display 3
Remaining time of the current chapter
.
.
On-screen display off
Playing time of the current title
.
Remaining time of the current title
pDisplay information of the on-screen display 1 mode
Current title
number
Current chapter
number
** “PCM”, “MPEG” or “DOLBY DIGITAL” is displayed. In
“DOLBY DIGITAL” case, the channels in the playing track
are displayed by number as follows.
Playing status
The case of Dolby Digital (AC-3) 5.1 ch:
TITLE 32
CHAPTER 30
PLAY
1 : 32 : 55
CHAPTER
Rear component 2
<
>
ALL
REPEAT
Current
play mode
Front component 2 +
Center component 1
LFE component 1
Playing time
of the
current
chapter*
pDisplay information of the on-screen display 3 mode
While playing a disc, the approximate bit rate of the
playback picture is always displayed by Mbps (Mega bit
per second).
BIT RATE
0
5
10
Bit rate of the playback picture
Download from Www.Somanuals.com. All Manuals Search And Download.
18EN
Pla yin g Discs in Va rio u s Mo d e s
zWhat is bit rate?
pDisplay information of the on-screen display 2 mode
Bit rate refers to the amount of video data per second in a
disc. The higher the bit rate is, the larger the amount of
data. However, this does not always mean that you can
get higher quality pictures.
PBC Status
Playing status
Disc type
(VIDEO CD Only)
Playing time
of the current
track*
VIDEO CD
PBC OFF
PLAY
12 : 07
TRACK
<
>
pDisplay information of the on-screen display off mode
No information is displayed. (Messages, etc., will be
displayed.)
Current track
number (total
track number)
TRACK:
V.INDEX:
11 ( 50 )
8
When playing back or stopping a CD/VIDEO
CD
Current index
number
DNR:
PAL
0
Press DISPLAY.
Current DNR
mode
Current color system
Each time you press the button, the on-screen display
changes as follows:
?
On-screen display 1
• During PBC playback (VIDEO CD Only)
.
Disc type
PBC Status
Playing status
On-screen display 2
.
On-screen display off
VIDEO CD
PBC ON
SCENE:
PLAY
12 : 07
Playing
time
pDisplay information of the on-screen display 1 mode
122 ( 159 )
Current
scene
Current track number
Playing status
number
(total scene
number)
TRACK 11
PLAY
12 : 07
TRACK
Current
index
number
INDEX
8
Playing
time of
the
current
track*
<
>
* In display 1 or 2 mode, each time you press TIME, the
information changes as shown below.
TRACK
REPEAT
Current
play
mode
Playing time of the current track
?
.
Remaining time of the current track
.
Playing time of the disc
.
Remaining time of the disc
• During PBC playback (VIDEO CD Only)
While you are doing Shuffle Play, Program Play, or
PBC Playback, the playing time of the disc and the
remaining time of the disc are not displayed.
Current scene
number
Playing status
SCENE 122
PLAY
05 : 27
pDisplay information of the on-screen display off mode
No information is displayed. (Messages, etc., will be
displayed.)
Playing
time
TRACK
REPEAT
Current
play
mode
19EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Playing time and number of
the current chapter
Using the Front Panel Display
Z
You can check information about the disc, such as the
total number of the titles or the tracks or remaining
time, using the front panel display.
Remaining time of
the current chapter
Press TIME
1
4
7
2
5
8
0
3
6
9
Press TIME
Press TIME
Press TIME
Playing time and number
of the current title
TIME
Remaining time of
the current title
When playing back a DVD
pDisplay information while playing the disc
The DVD indicator on the disc tray lights up.
DVD
Notes
•
Depending on the DVD, the chapter number or time may
Lights up during
programming
not appear.
•
While you are doing Shuffle Play or Program Play, the
playing time of the disc and the remaining time of the disc
are not displayed.
Lights
up
Lights up
w hile
w hen
you can
sw itch
the
playing the
sections
w ith the
auto pause
signal
Lights up
w hen you
can do
Resume
Play
When playing back a CD/VIDEO CD
Current
color
system
Current
sound
status
Playing
status
angles
pDisplay information while playing a disc
The CD indicator for the CD or the VIDEO CD indicator for
the VIDEO CD lights up.
CD
VIDEO CD
Lights up w hile
PBC playback
(VIDEO CD
Only)
Lights up
w hen you
can do
Current
play mode
Current
title
number
Current
chapter
number
Playing time
Current
color
system
Current
sound
status
Playing
status
Resume Play
pChecking the remaining time
Press TIME.
Each time you press TIME while playing the disc, the
display changes as shown in the chart to the right. The time
information in the on-screen display (1 and 2) also changes
each time you press TIME.
Current track Current
Current
play mode
Playing time
number
index
Lights up during
programming
number
zWhen playing VIDEO CDs with PBC functions
The current scene number is displayed instead of the
current track number and the current index number. In
this case, the front panel display does not change when
you press TIME.
20EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
pChecking the remaining time
Press TIME.
Each time you press TIME while playing a disc, the display
changes as shown in the chart below. The time information
in the on-screen display (1 and 2) also changes each time
you press TIME.
Playing time and number
of the current track
Press TIME
Press TIME
Press TIME
Press TIME
Remaining time of
the current track
Playing time of
the disc
Remaining time of
the disc
Note
While you are doing Shuffle Play, Program Play or PBC
playback, the playing time of the disc and the remaining time
of the disc are not displayed.
21EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Repeating the current title or chapter
Playing Repeatedly
(Repeat Play)
You can repeat only the current title or chapter in
Continuous Play mode. You may not be able to do
Repeat Play depending on the DVD.
You can play all the titles/ tracks on a disc, a single
title/ chapter/ track or a specific portion repeatedly.
pRepeating the current title
While the title you want is being played, press REPEAT
repeatedly until “TITLE REPEAT ” appears on the TV
screen.
1
4
7
2
5
8
0
3
6
9
The player repeats the current title.
pRepeating the current chapter
CLEAR
While the chapter you want is being played, press REPEAT
repeatedly until “CHAPTER REPEAT ” appears on the TV
screen.
REPEAT
A˜B
The player repeats the current chapter.
“REPEAT 1” appears on the front panel display.
·
“CHAPTER” is displayed w hen you
select the current chapter
Repeating all the titles or all the tracks on
a disc
T I T L E
REPEAT
In Shuffle or Program Play mode, the player repeats
the titles or tracks in the shuffled or programmed
order.
You cannot do Repeat Play during PBC playback of
VIDEO CDs (page 17). You may not be able to do
Repeat Play depending on the DVD.
To cancel repeating the current title or chapter
Press CLEAR.
Press REPEAT during playback.
Repeating the current track
“ALL REPEAT” appears on the screen and “REPEAT”
appeares on the front panel display. The player repeats
the titles/ chapters/ tracks as follows:
You can repeat only the current track in Continuous
Play mode.
The player repeats
When the disc is played in
While the track you want is being played, press
REPEAT until “TRACK REPEAT ” appears on the TV
screen.
All the titles/ all the tracks
Continuous Play
(page 10, 14)
All the titles or tracks in
random order
Shuffle Play
(page 24)
“REPEAT 1” appears on the front panel display and
the player repeats the current track.
Programmed titles/
chapters/ tracks
Program Play (page 24)
TRACK
REPEAT
To cancel repeating all the titles or all the tracks on a disc
Press CLEAR.
To cancel repeating the current track
Press CLEAR.
Note
Repeat play is canceled when you turn the power off.
22EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Repeating a specific portion Z
(A˜B Repeat)
You can play a specific portion of a title, chapter, track
repeatedly. This is useful when you want to memorize
lyrics.
During PBC Playback of VIDEO CDs (page 17), this
function is available only while playing moving
pictures.
You may not be able to do Repeat Play depending on
the DVD.
1
During playback, when you find the starting point
(point A) of the portion to be played repeatedly,
press A˜B.
The starting point (point A) is set. “A-B REPEAT”
appears on the TV screen and “B” flashes.
A - B
REPEAT
“REPEAT A-” also appears on the front panel
display and “B” flashes.
2
When you reach the ending point (point B), press
A˜B again.
“A-B REPEAT” on the TV screen disappears and
the player starts repeating this specific portion.
“REPEAT A-B” appears on the front panel display
during A˜B repeat play.
To cancel A˜B Repeat
Press CLEAR.
To cancel setting halfway
Press CLEAR.
Notes
• A˜B Repeat is canceled when:
– you open or close the disc tray
– you turn the power off
• When you set A˜B Repeat, the settings for Shuffle Play
and Program Play are canceled.
• You may not be able to set A˜B Repeat, depending on the
scene of a DVD or a VIDEO CD.
23EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Playing in Random Order
(Shuffle Play) Z
Creating Your Own Program
(Program Play)
You can have the player “shuffle” titles or tracks and
play them in a random order.
You can arrange the order of the titles, chapters or
tracks on the disc and create your own program. The
program can contain up to 99 titles, chapters and
tracks.
7
8
0
9
7
8
0
9
CLEAR
SHUFFLE
CLEAR
PROGRAM
·
·
ENTER
?/>/.//
1
2
Press SHUFFLE.
1
Press PROGRAM.
The programming display appears.
Press ·.
“TRACK__” is displayed w hen
you play a VIDEO CD or a CD.
(During playback, the player starts Shuffle Play
when you follow the step 1.)
To cancel Shuffle Play
Press CLEAR
PROGRAM
A L L CLEAR
1 . T I T L E – –
2 . T I T L E – –
3 . T I T L E – –
4 . T I T L E – –
5 . T I T L E – –
6 . T I T L E – –
7 . T I T L E – –
8 . T I T L E – –
9 . T I T L E – –
T
Notes
– –
0 1
0 2
0 3
0 4
0 5
0 6
0 7
• The Shuffle Play is canceled when:
– you open or close the disc tray
– you turn the power off
•
You may not be able to do Shuffle Play depending on the
DVD.
•
When you play a DVD, you can do Shuffle Play only by
titles.
ENTER
[PLAY] [PROGRAM]
2
Press /.
“01” is highlighted.
Chapter
Title
PROGRAM
A L L CLEAR
1 . T I T L E – –
2 . T I T L E – –
3 . T I T L E – –
4 . T I T L E – –
5 . T I T L E – –
6 . T I T L E – –
7 . T I T L E – –
8 . T I T L E – –
9 . T I T L E – –
T
C
– – A L L
0 1
0 2
0 3
0 4
0 5
0 6
0 7
0 1
0 2
0 3
0 4
0 5
ENTER
[PLAY] [PROGRAM]
24EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
3
Select the title, chapter or track you want to
program using >/ ., then press ENTER.
For example, select title or track 2.
(You can also use the number buttons and ENTER
button to select. In this case, the selected number
is displayed on the screen.)
4
To program other titles, chapters or tracks, repeat
Step 3.
The programmed titles, chapters or tracks are
displayed from 02 in order.
PROGRAM
A L L CLEAR
1 . T I T L E 0 2 – 0 2
2 . T I T L E 1 5
3 . T I T L E 0 3
4 . T I T L E 0 5
5 . T I T L E 0 7 – 1 4
6 . T I T L E – –
7 . T I T L E – –
8 . T I T L E – –
9 . T I T L E – –
T
– –
0 1
0 2
0 3
0 4
0 5
0 6
0 7
pWhen playing a DVD
When both titles and chapters are recorded on the disc,
select the title, then the chapter.
PROGRAM
A L L CLEAR
1 . T I T L E 0 2
2 . T I T L E – –
3 . T I T L E – –
4 . T I T L E – –
5 . T I T L E – –
6 . T I T L E – –
7 . T I T L E – –
8 . T I T L E – –
9 . T I T L E – –
T
C
– – A L L
ENTER
[PLAY] [PROGRAM]
0 1
0 2
0 3
0 4
0 5
0 6
0 7
0 1
0 2
0 3
0 4
5
Press ·to start Program Play.
ENTER
[PLAY] [PROGRAM]
To cancel Program Play
Press CLEAR.
To cancel programming
Press PROGRAM.
PROGRAM
A L L CLEAR
To change programming
1 In Step 2, select the program number of the title, chapter or
1 . T I T L E 0 2 – 0 3
2 . T I T L E – –
3 . T I T L E – –
4 . T I T L E – –
5 . T I T L E – –
6 . T I T L E – –
7 . T I T L E – –
8 . T I T L E – –
9 . T I T L E – –
T
– –
0 1
0 2
0 3
0 4
0 5
0 6
0 7
track you want to change using >/ ..
2 Follow Step 3 for new programming.
To cancel the programmed order
To cancel all the titles, chapters or tracks in the programmed
order, select “ALL CLEAR” in Step 2.
To cancel the selected program, select the program using >/ .
in Step 2 then press CLEAR, or select “--” in Step 3 and then
press ENTER.
ENTER
[PLAY] [PROGRAM]
pWhen playing a VIDEO CD or CD
Select the track you want to program.
zThe program remains even after the Program Play
ends
When you press ·, you can play the same program
Total time of the
programmed tracks
again.
zYou can do Repeat Play or Shuffle Play of the
programmed titles, chapters or tracks
PROGRAM
0 : 1 5 : 3 0
A L L CLEAR
1 . TRACK0 2
2 . TRACK– –
3 . TRACK– –
4 . TRACK– –
5 . TRACK– –
6 . TRACK– –
7 . TRACK– –
8 . TRACK– –
9 . TRACK– –
During Program Play, press REPEAT or SHUFFLE.
T
– –
0 1
0 2
0 3
0 4
0 5
0 6
Notes
• The number of titles, chapters or tracks displayed are that
of the titles, chapters or tracks recorded on a disc.
• The program is canceled when:
– you open or close the disc tray
– you turn the power off
• You may not be able to do Program Play depending on the
DVD.
ENTER
[PLAY] [PROGRAM]
• While you are doing PBC playback, you cannot set a
program unless you stop playback once.
25EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Resuming Playback from the
Point Where You Stopped a
Disc (Resume Play)
Reducing the Picture Noise
(DNR: Digital Video Noise
Reduction) Z
The player stores the point where you stopped a disc if
“RESUME” appears on the front panel display. In this
case, you can resume playback from that point.
As long as you do not open the disc tray, Resume Play
is available even if you turn the power off.
You can make the picture clearer by reducing the
picture noise.
1
4
7
2
5
8
0
3
6
9
·
p
DNR
Press DNR.
Each time you press the button, the value for DNR
changes as follows:
1
2
While playing a disc, press pto stop playback.
“RESUME” appears in the front panel display and
“When playing next time, disc restarts from point
you stopped.” appears on the TV screen.
If “RESUME” does not appear, Resume Play is not
available.
0 m 1 m 2 m 3
* 0 means DNR is off.
As the value increases, the picture noise will be
reduced. However, afterimages may increase.
Press ·.
The player starts playback from the point you
stopped the disc in Step 1.
Notes
•
Depending on the disc, the effect may be difficult to tell.
If the afterimages appear on the TV screen, set the noise
reduction function to off on your TV. Then set DNR to “0”
on the player.
•
zTo play from the beginning of the disc
When “RESUME” appears on the front panel display
before you start playing, press pto turn off “RESUME,”
then press ·.
Notes
•
You may not do Resume Play depending on the DVD.
Resume Play is not available in Shuffle or Program Play
mode.
•
•
•
Depending on where you stopped the disc, the player may
resume playback from a different point.
The point where you stopped playing is cleared when:
– you open or close the disc tray
– you disconnect the AC power cord
– you change the play mode
– you start playback after selecting a title, chapter or track
– you change the settings of “DVD MENU”, “AUDIO” or
“SUBTITLE” in “LANGUAGE SETUP” in the setup display
– you change the settings of “TV TYPE”, “PARENTAL
CONTROL” in ”INITIAL SETUP 1” in the setup display
26EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Changing the Sounds Z
With DVDs on which multilingual sounds are
recorded, you can select the language you want while
playing the DVD.
With multiplex VIDEO CDs, you can select the sound
from the right or left channel and listen to the sound of
the selected channel through both the right and left
speakers. In this case, the sound loses the stereo effect.
1
4
7
2
5
8
0
3
6
9
AUDIO
CHANGE
Press AUDIO CHANGE while playing a disc.
Each time you press the button, the indication and the
language/ sound from the speakers change as follows:
pWhen playing a DVD
AUDIO 1 n AUDIO 2 n .....
AUDIO
3:PORTUGUESE
pWhen playing a VIDEO CD or a CD
1/ L : The sound of the left channel
?
.
2/ R : The sound of the right channel
.
Stereo
(1/ L 2/ R): The standard stereo sound
Notes
• Depending on the DVD, you may not be able to change the
languages even if multilingual sounds are recorded on the
DVD.
• While playing the CD/ VIDEO CD, if you turn off the
player the standard stereo playback will be resumed.
• If the language is indicated in a four-digit number, refer to
the Language Code List on page 48.
27EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Changing the Subtitle Language
Displaying the SubtitlesZ
When subtitles are turned off, press SUBTITLE ON/
OFF to turn on the subtitles.
With DVDs on which subtitles are recorded, you can
turn the subtitles on and off whenever you want while
playing the DVD. With DVDs on which multilingual
subtitles are recorded, you can change the subtitles
whenever you want while playing the DVD.
While playing a DVD, press SUBTITLE CHANGE
repeatedly until the subtitles you want appear on the
TV screen.
SUBTITLE 1 n SUBTITLE 2 n ...
SUBTITLE
1:ENGLISH
1
4
7
2
5
8
0
3
6
9
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
Notes
•
The type and number of languages for subtitles vary from
disc to disc.
•
Depending on the DVD, you may not be able to change the
subtitles even if multilingual subtitles are recorded on the
DVD.
Turning the Subtitles On and Off
Press SUBTITLE ON/ OFF while playing a DVD.
Subtitles appear on the TV screen.
To turn off the subtitles
Press SUBTITLE ON/ OFF again.
Notes
•
•
•
•
When playing the DVD on which no subtitles are recorded,
no subtitles appear even if you press SUBTITLE ON/ OFF.
Depending on the DVD, you may not be able to turn the
subtitles on even if they are recorded on the DVD.
Depending on the DVD, you may not be able to turn the
subtitles off.
If the language is indicated in a four-digit number, refer to
the Language Code List on page 48.
28EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Changing the Angles Z
Limiting Playback by Children
(Parental Control) Z
With DVDs on which various angles (multi-angles) for
a scene are recorded, you can change the angles
whenever you want while playing the DVD.
Playing some DVDs can be limited depending on the
age of users. The “Parental Control” function allows
you to set a playback limitation level.
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
Number buttons
ANGLE
CHANGE
ENTER
SET UP
When “ANGLE” appears on the front panel display
while playing a DVD, press ANGLE CHANGE
repeatedly until you get the angle you want.
?/>/.//
ANGLE 1 n ANGLE 2 n ...
1
Press SET UP to display the setup display on the
TV screen before playing.
ANGLE
1
1
2
INITIAL SETUP
1
TV TYPE:
COLOR SYSTEM:
AUTO PLAY:
16:9
AUTO
OFF
zYou can specify the angle beforehand
DIMMER:
BRIGHT
BLUE
ON
Specify the angle when “ANGLE” is not displayed on the
front panel display. When a scene on which multi-angles
are recorded comes, the angle is automatically selected.
BACKGROUND:
SCREEN SAVER:
PARENTAL CONTROL
ENTER
SETUP
QUIT
Notes
•
The number of angles varies from disc to disc or from scene
to scene. The number of angles that can be changed on a
scene is that of angles recorded for that scene.
•
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
(Continued)
29EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
2
Select “INITIAL SETUP 1” using ?/ /, then
press ENTER or ..
4
Enter a password in 4 figures using the number
buttons, then press ENTER.
The figures change to asterisks ( ), and the
display for confirming the password appears.
1
2
INITIAL SETUP
1
1
2
TV TYPE:
16:9
AUTO
OFF
INITIAL SETUP
1
COLOR SYSTEM:
AUTO PLAY:
PARENTAL CONTROL
DIMMER:
BRIGHT
BLUE
ON
BACKGROUND:
SCREEN SAVER:
PARENTAL CONTROL
To confirm, enter
password again, then
press
ENTER
.
ENTER
SETUP
QUIT
3
Select “PARENTAL CONTROL” using >/ ., then
press ENTER.
5
To confirm your password, enter it using the
number buttons, then press ENTER.
The display for setting the playback limitation
level and changing the password appears.
pWhen you have not entered a password yet
The display for entering a password appears.
1
2
1
2
INITIAL SETUP
1
INITIAL SETUP
1
PARENTAL CONTROL
LEVEL:
STANDARD:
PARENTAL CONTROL
OFF
USA
Entry password. Enter
CHANGE PASSWORD
a
number in
4
.
figures,
then press
ENTER
ENTER
SETUP
QUIT
6
Select “STANDARD” using >/ ., then press /.
pWhen you have already entered a password
The display for confirming the password appears.
Skip Step 4.
1
2
INITIAL SETUP
1
PARENTAL CONTROL
LEVEL:
STANDARD:
1
2
OFF
USA
INITIAL SETUP
1
CHANGE PASSWORD OTHERS
PARENTAL CONTROL
Enter password, then
press
ENTER
.
ENTER
SETUP
QUIT
30EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
To change the password
1 In Step 5, select “CHANGE PASSWORD” using >/ ., then
press / or ENTER.
7
Select an area as the standard for playback
limitation level using >/ ., then press /.
When you select “OTHERS”, select and enter the
standard code in the table below using number
buttons.
The display for changing the password appears.
2 Follow Steps 4 and 5 to enter a new password.
zIf you have forgot your password
1
2
INITIAL SETUP
1
Enter six digits number “199703” in Step 4 to clear the
current password. To enter a new password, follow the
procedure from Step 4 again.
PARENTAL CONTROL
LEVEL:
STANDARD:
OFF
USA
CHANGE PASSWORD
Notes
• When you play DVDs which do not have the Parental
Control function, playback cannot be limited on this player.
• When you do not set a password, you cannot change the
settings for playback limitation.
ENTER
SETUP
QUIT
• Depending on the DVD, you may be asked to change the
parental control level while playing the disc. In this case,
enter the password, then change the level.
When you stop playing the DVD, the level returns to the
original level.
8
Select “LEVEL” using >/ ., then press /.
1
2
INITIAL SETUP
1
PARENTAL CONTROL
LEVEL:
STANDARD:
Standard
Austria
Code number
2046
2057
2079
2092
2115
2165
2174
2109
2219
2238
2254
2276
2363
2376
2379
2424
2501
2149
2499
2086
2543
2528
OFF
8.
CHANGE PASSWORD 7. NC17
6.
5.
R
Belgium
Canada
4. PG13
3.
2.
PG
China
ENTER
SETUP
QUIT
Denmark
Finland
9
Select the level you want using >/ ., then press
ENTER.
France
Germany
Hong Kong
Indonesia
Italy
1
2
INITIAL SETUP
1
PARENTAL CONTROL
LEVEL:
STANDARD:
4. PG13
USA
CHANGE PASSWORD
Japan
Malaysia
Netherlands
Norway
Philippines
Singapore
Spain
ENTER
SETUP
QUIT
The lower the value is, the more strict the
limitation.
To return to the normal screen
Press SET UP.
Sweden
Switzerland
Taiwan
To turn off the Parental Control function and play the DVD
after entering your password
Thailand
Set “LEVEL” to “OFF” in Step 9, then press ·.
United Kingdom 2184
31EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Manufacturer
Code
number
Manufacturer
Code
number
Controlling the TV or the AV
Amplifier (Receiver) with the
Supplied Remote Z
Sony (default)
Gold Star
Philips
01
Sharp
29
03, 04
06, 08
09
Aiwa
32
JVC
33
If you adjust the remote signal, you can control your
TVs with the supplied remote. Default setting is to
control Sony TVs with the g mark.
When you connect the player to a Sony amplifier, you
can also set the input of the amplifier to this player
with the supplied remote .
Miver
Toshiba
Siemens
Thomson
Loewe
Orion
38
Blaupunkt
Grundig
Saba
10, 21
11
39
43
12, 13
17, 49
23
45
Panasonic
Samsung
Hitachi
47, 48
52
Ferguson
NEC
POWER
24
66
1
4
7
2
5
8
0
3
6
9
Number
buttons
Sanyo
25
TEAC
Akai
67
Pioneer
26
68
Mitsubishi
27, 28, 50
Nokia
69
You can control your TV using the buttons below.
TV/POWER
VOL
Controlling TVs with the remote
1
4
7
2
5
8
0
3
6
9
CH
Hold down POWER, and enter your TV’s
manufacturer’s code in the table below using the
number buttons. Then release POWER.
TV/VIDEO
WIDE MODE
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Notes
By pressing
TV POWER
TV/ VIDEO
WIDE MODE
VOL
You can
•
If you enter a new code number, the code number
previously entered will be erased.
Turn on or off the TV
•
When you replace the batteries of the remote commander,
the code number automatically resets to 01 (Sony). Reset the
appropriate code number.
Select the input source for the TV
Swiches the wide mode of the TV
Adjust the volume of the TV
Change the channel of the TV
CH
Note
Depending on the TV, you may not be able to control your TV
or to use some buttons above.
32EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g Discs in Va rio u s Mo d e s
Controlling Sony AV amplifier with the
remote
Hold down POWER, and enter your AV amplifier’s
input connector code in the table below using the
number buttons.* Then release POWER.
Code number
Amplifier connector
VIDEO 1
91
92
93
94
95
96
97
VIDEO 2
VIDEO 3
AUX 1
LD/ DVD (default setting)
AC-3
TV
* If you connect the player to the SONY Mini Hi-Fi
Component System, enter “98”.
When you press AV CENTER on the supplied remote,
you can set the input of AV amplifier to the player.**
You can also change the volume of the sound using AV
VOL.
1
4
7
2
5
8
0
3
6
9
AV CENTER
AV VOL
** If you connect the player to the SONY Mini Hi-Fi
Component System, press AV CENTER repeatedly
to change the input of the system.
33EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g s a n d Ad ju st m e n t s
3
Select the item you want using >/ ., then press /
or ENTER.
Using the Setup display Z
1
2
Using the setup display, you can do the initial setup,
adjusting the picture and sound quality, setting the
various outputs, etc. You can also set a language for
the sub-titles and the setup display, limit playback by
children, etc.
INITIAL SETUP
1
TV TYPE:
COLOR SYSTEM:
AUTO PLAY:
16:9
AUTO
OFF
DIMMER:
BRIGHT
BLUE
ON
BACKGROUND:
SCREEN SAVER:
PARENTAL CONTROL
For details on each setup display item, see pages 35 to
37.
The setup display items are listed in page 47.
OFF
ENTER
SETUP
QUIT
4
Select the setting you want using >/ ., then press
ENTER.
SET UP
1
2
INITIAL SETUP
1
ENTER
TV TYPE:
COLOR SYSTEM:
AUTO PLAY:
16:9
AUTO
OFF
?/>/.//
DIMMER:
BRIGHT
BLUE
OFF
BACKGROUND:
SCREEN SAVER:
PARENTAL CONTROL
ENTER
SETUP
QUIT
1
Press SET UP to display the setup display on the
TV screen.
1
2
To cancel using the setup display on the way
Press SET UP.
INITIAL SETUP
1
TV TYPE:
COLOR SYSTEM:
AUTO PLAY:
16:9
AUTO
OFF
Note
DIMMER:
BRIGHT
BLUE
ON
Some setup display items require operations other than
selecting the setting. For details on these items, see the
relevant pages.
BACKGROUND:
SCREEN SAVER:
PARENTAL CONTROL
ENTER
SETUP
QUIT
2
Select the main item you want using ?/ /, and
then press ENTER.
The selected main item is highlighted.
Main
items
1
2
INITIAL SETUP
1
TV TYPE:
COLOR SYSTEM:
AUTO PLAY:
16:9
AUTO
OFF
DIMMER:
BRIGHT
BLUE
ON
BACKGROUND:
SCREEN SAVER:
PARENTAL CONTROL
ENTER
SETUP
QUIT
34EN
Download from Www.Somanuals.com. All Manuals Search And Download.
pAUDIO
Switches the language for the sounds.
Setting the Language for
Display and Sound
(LANGUAGE SETUP)
• ORIGINAL : the language given the priority in the disc
• ENGLISH
• CHINESE
• SPANISH
• PORTUGUESE
Select “
” after pressing SET UP.
• JAPANESE
“LANGUAGE SETUP” allows you to set various
languages for on-screen display or sound.
Default settings are underlined.
• FRENCH
• GERMAN
• ITALIAN
• DUTCH
Note
• OTHERS/
When you select a language that is not recorded on the DVD,
one of the recorded languages is automatically selected except
for “OSD”.
When you select “OTHERS,” select and enter the
language code from the list using the number buttons
(page 48).
pSUBTITLE
Switches the language for the subtitles.
1
2
LANGUAGE SETUP
• AUDIO FOLLOW*
OSD:
DVD MENU:
AUDIO:
ENGLISH
ENGLISH
ORIGINAL
• ENGLISH
• CHINESE
SUBTITLE:
AUDIO FOLLOW
• SPANISH
• PORTUGUESE
• JAPANESE
• FRENCH
• GERMAN
ENTER
SETUP
QUIT
• ITALIAN
• DUTCH
• OTHERS/
pOSD (On-Screen Display)
When you select “OTHERS,” select and enter the
language code from the list using the number buttons
(page 48).
Switches the language for the on-screen display.
•
•
ENGLISH
CHINESE
* When you select “AUDIO FOLLOW,” the language for the
subtitles change according to the language for the sound.
pDVD MENU
Switches the language for the DVD menu.
•
•
•
•
•
•
•
•
•
•
ENGLISH
CHINESE
SPANISH
PORTUGUESE
JAPANESE
FRENCH
GERMAN
ITALIAN
DUTCH
OTHERS/
When you select “OTHERS,” select and enter the
language code from the list using the number buttons
(page 48).
35EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g s a n d Ad ju st m e n t s
pCOLOR SYSTEM
Selects the color system when you play a VIDEO CD.
Settings for Display (INITIAL
SETUP 1)
•
AUTO: Outputs the video signal in the system of the
VIDEO CD, either PAL or NTSC. If your TV is the DUAL
system, select AUTO.
1
Select “
” after pressing SET UP.
•
•
PAL: changes the video signal of an NTSC VIDEO CD and
outputs it in PAL system.
“INITIAL SETUP 1” allows you to set the display
according to the playback conditions.
Default settings are underlined.
NTSC: changes the video signal of a PAL VIDEO CD and
outputs it in NTSC system.
Notes
•
You cannot change the color system of the DVD itself.
1
2
INITIAL SETUP
1
•
You can change the color system of this unit according to
the connected TV. See page 9.
TV TYPE:
COLOR SYSTEM:
AUTO PLAY:
16:9
AUTO
OFF
pAUTO PLAY
Selects the setting of Auto Play when you connect the AC
DIMMER:
BRIGHT
BLUE
ON
BACKGROUND:
SCREEN SAVER:
PARENTAL CONTROL
power cord to the AC outlet.
•
•
OFF: does not start playing with TIMER, DEMO1 or
DEMO2.
ENTER
SETUP
QUIT
TIMER: starts playing a disc automatically when you
connect the AC power cord to the AC outlet. By connecting
a timer (not supplied), you can start playing at any time
you want.
pTV TYPE
Selects the aspect ratio of the TV to be connected.
•
•
DEMO1: starts playing the demonstration 1 automatically.
DEMO2: starts playing the demonstration 2 automatically.
•
•
16:9: when you connect a wide-screen TV to the player
4:3 LETTER BOX: when you connect a normal TV to the
player. Displays the wide picture with bands displayed on
the upper and lower portions of the screen.
pDIMMER
Adjusts the lighting of the front panel display.
•
4:3 PAN SCAN : when you connect a normal TV to the
player. Displays the wide picture on the whole screen with
a portion automatically cut off.
•
•
•
BRIGHT: makes the front panel display bright.
DARK: makes the front panel display dark.
OFF: turns off the lighting of the front panel display.
pBACKGROUND
Selects the background color of the TV screen in stop mode.
16:9
•
•
BLUE: The background color is blue.
BLACK: The background color is black.
pSCREEN SAVER
Turns on and off the screen saver. If you turn on the screen
saver, the screen saver image appears when you leave the
player or the remote in pause mode for 15 minutes. The
screen saver is useful to prevent your display from damage.
4:3 LETTER BOX
•
•
ON: turns on the screen saver.
OFF: turns off the screen saver.
4:3 PAN SCAN
pPARENTAL CONTROL
Sets a password and playback limitation level when you play
DVDs with playback limitation for children.
For details, see page 29.
Note
Depending on the DVD, “4.3 LETTER BOX“ may be selected
automatically instead of “4.3 PAN SCAN” and vice versa.
36EN
Download from Www.Somanuals.com. All Manuals Search And Download.
pDIGITAL OUT
Switches the methods of outputting audio signals from the
DIGITAL OUT OPTICAL and COAXIAL connectors on the
rear panel of the player.
Settings for Sound (INITIAL
SETUP 2)
• PCM: when the player is connected to an audio component
without a built-in Dolby Digital (AC-3) decoder. The Dolby
Digital track is output also in 2 channels and the surround
component depends on the “SURROUND” setting.
• DOLBY DIGITAL/ PCM: when the player is connected to
audio component with a built-in Dolby Digital (AC-3)
decoder.
2
Select “
” after pressing SET UP.
“INITIAL SETUP2” allows you to set the sound
according to the playback conditions.
Default settings are underlined.
1
2
Note
INITIAL SETUP
2
Select the setting correctly. Otherw ise, no sound or
strange sound w ill come out from the speakers,
affecting your ears or causing the speakers to be
damaged.
TRACK SELECTION:
SURROUND:
DIGITAL OUT:
OFF
ON
PCM
OFF
OFF
AUDIO DRC:
AUDIO ATT:
pAUDIO DRC (Dynamic Range Control)
Makes the sound clear with the volume turned down at night,
etc. when you play a DVD. This affects the output from the
DIGITAL OUT connectors only when “DIGITAL OUT” in
”INITIAL SETUP 2” is set to “PCM,” and the output from the
LINE OUT (AUDIO 1,2).
ENTER
SETUP
QUIT
• OFF: Normally select this position.
pTRACK SELECTION
• ON: makes the sound clear even if you turned the volume
down.
Gives the Dolby Digital (AC-3) format priority when you play
a DVD on which multiple audio formats are recorded. If
multiple audio channels are recorded in Dolby Digital (AC-3)
format, the higher-numbered channel audio recorded in
Dolby Digital (AC-3) format is played.
Note
When you play DVDs without the AUDIO DRC function,
there may be no effect on the sound.
•
•
OFF: No priority given.
AUTO: Priority given.
pAUDIO ATT (attenuation)
Notes
•
Selects the setting of the output from the LINE OUT (AUDIO
1, 2) connectors according to audio equipment to be
connected.
When you set this item to “ON”, the language may change
depending on the “AUDIO” settings in “LANGUAGE
SETUP.”
• OFF: turns off the audio attenuation.
• ON: reduces the audio output level so that no sound
distortion occurs.
The “TRACK SELECTION“ setting has higher priority than
that of “AUDIO” settings in “LANGUAGE SETUP” (page
35).
Note
•
Depending on the DVD, the audio with priority may be
predetermined. In this case, you cannot give priority to the
Dolby Digital (AC-3) format by selecting “AUTO.”
The setting does not affect the output from the DIGITAL OUT
connectors.
pSURROUND
Switches the mixing down methods when you play a DVD on
which the sound in Dolby Digital (AC-3) format is recorded.
•
•
ON: when the player is connected to an audio component
that conforms to Dolby surround, Dolby Pro Logic
surround, etc.
OFF : when the player is connected to a normal audio
component.
37EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Precautions
Notes on Discs
On safety
On handling discs
•
Caution – The use of optical instruments with this product
•
To keep the disc clean, handle the disc by its edge. Do not
will increase eye hazard.
touch the surface.
•
Should any solid object or liquid fall into the cabinet,
unplug the player and have it checked by qualified
personnel before operating it any further.
•
Do not stick paper or tape on the disc.
If there is glue (or a similar substance) on the disc, remove
the glue completely before using the disc.
On power sources
•
The player is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet, even if
the player itself has been turned off.
•
If you are not going to use the player for a long time, be
sure to disconnect the player from the wall outlet. To
disconnect the AC power cord (mains lead), grasp the plug
itself; never pull the cord.
Not this w ay
•
•
Do not expose the disc to direct sunlight or heat sources
such as hot air ducts, or leave it in a car parked in direct
sunlight as there can be considerable rise in temperature
inside the car.
•
Should the AC power cord (mains lead) need to be
changed, have it done at a qualified service shop only.
On placement
After playing, store the disc in its case.
•
•
•
Place the player in a location with adequate ventilation to
prevent heat build-up in the player.
On cleaning
Do not place the player on a soft surface such as a rug that
might block the ventilation holes on the bottom.
Do not place the player in a location near heat sources, or in
a place subject to direct sunlight, excessive dust or
mechanical shock.
•
Before playing, clean the disc with a cleaning cloth. Wipe
the disc from the center out.
On operation
•
If the player is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture may
condense on the lenses inside the player. Should this occur,
the player may not operate properly. In this case, remove
the disc and leave the player turned on for about half an
hour until the moisture evaporates.
•
Do not use solvents such as benzine, thinner, commercially
available cleaners or anti-static spray intended for vinyl
LPs.
On adjusting volume
•
Do not turn up the volume while listening to a portion with
very low level inputs or no audio signals. If you do, the
speakers may be damaged when a peak level portion is
played.
On cleaning
•
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
If you have any questions or problems concerning your
player, please consult your nearest Sony dealer.
IMPORTANT NOTICE
Caution: The enclosed DVD Player is capable of holding
a still video image or Setup display image on your
television screen indefinitely. If you leave the still video
image or Setup display image displayed on your TV for
an extended period of time you risk permanent damage
to your television screen. Projection televisions are very
susceptible.
38EN
Download from Www.Somanuals.com. All Manuals Search And Download.
The picture noise appears.
/Clean the disc.
Troubleshooting
/If video from your DVD player has to go
through your VCR to get to your TV, the copy-
protection applied to some DVD programs
could affect picture quality. If you still
experience problems after checking your
connections, please try connecting your DVD
player directly to your TV’s S-input, if your TV
is equipped with that input.
If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.
The power is not turned on.
/If the indicator above the POWER button is not
lit, check that the AC power cord is connected
securely.
The sound noise is heard.
/Clean the disc.
The sound distortion occurs.
There is no picture.
/In the setup display, set “AUDIO ATT” in
“INITIAL SETUP 2” to “ON.”
/Check that the player is connected securely.
/The video connecting cord is damaged. Replace
it with a new one.
The disc does not play.
/Make sure you connect the player to the video
input connector on the TV. (page 6)
/Make sure you turn on the TV.
/Make sure you select the video input on the TV
so that you can view the pictures from the
player.
/There is no disc inside (“INSERT DISC” appears
on the TV screen).
Insert a disc.
/Insert the disc with the playback side facing
down on the disc tray correctly.
/Place the disc on the disc tray correctly.
/Clean the disc.
There is no sound.
/The player cannot play CD-ROMs, etc. (page 5)
Insert a DVD, a VIDEO CD, or CD.
/Check the region code of the DVD. (page 4)
/Moisture has condensed inside the player.
Remove the disc and leave the player turned on
for about half an hour. (page 38)
/Check that the player is connected securely.
/The audio connecting cord is damaged. Replace
it with a new one.
/Make sure you connect the player to the audio
input connectors on the amplifier. (page 6)
/Make sure you turn on the TV and the
amplifier.
/Make sure you select the appropriate position
on the amplifier so that you can listen to the
sound from the player.
/The player is in pause mode or in Slow-motion
Play mode. Press ·to return to normal play
mode.
The player does not play from the beginning when playing
a disc.
/Repeat Play, Shuffle Play or Program Play has
been selected. Press CLEAR. (page 22 to 25)
/Resume Play has been selected.
Press pon the front panel or on the remote
before you start playing. (page 26)
/Fast forward (FF1 or FF2) or fast reverse (FR1 or
FR2) is performed. Press ·to return to
normal play mode.
/A title menu or a DVD menu automatically
appears on the TV screen when you play your
DVD, or a setup display automatically appears
on the TV screen when you play your VIDEO
CD with PBC functions.
The remote does not function.
/Remove any obstacles between the remote and
the player.
The DVD does not play when you select a title.
/Use the remote near the player.
/Point the remote at the remote sensor g on the
player.
/Replace all the batteries in the remote with new
ones if they are weak.
/The Parental Control functions. (page 29)
The player starts playing the DVD automatically.
/The DVD features the auto playback function.
/In the setup display, set “AUTO PLAY” to
“OFF” under “INITIAL SETUP 1.” Otherwise
the player starts playback automatically.
39EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Stopping playback, Search, Slow-motion Play, Repeat
Play, Shuffle Play or Program Play, etc., cannot be done.
/Depending on the disc, you may not do some of
The sound loses stereo effect when you play a VIDEO CD
or a CD.
/“1/ L” or “2/ R” appears on the front panel
the operations above.
display.
On the remote, press AUDIO CHANGE
repeatedly until “1/ L 2/ R ” appears. (page 27)
/Make sure you connect the player
appropriately. (pages 7, 8)
Messages do not appear on the TV screen in the language
you want.
/In the setup display, select the language for the
on-screen display in “OSD” under
“LANGUAGE SETUP.” (page 35)
The player does not operate properly.
/Static electricity, etc., may affect the player's
operation.
The language for the sound cannot be changed when you
play a DVD.
Disconnect the AC power cord once, then
connect it again.
/Multilingual sound is not recorded on the DVD.
/Changing the language for the sound is
prohibited on the DVD.
The numbers or letters of 5 characters is displayed on the
screen.
The language for the sound changes automatically.
/When you set the “TRACK SELECTION” in
“INITIAL SETUP 2” to ”ON” in the setup
display, the language may change depending
on the “AUDIO” settings in “LANGUAGE
SETUP.” The “TRACK SELECTION” setting
has higher priority than that of ”AUDIO”
settings. (page 37)
/Self diagnosis function was activated. See the
table in page 41 and treat the player
appropriately.
The language for the subtitles cannot be changed when
you play a DVD.
/Multilingual subtitles are not recorded on the
DVD.
/Changing the language for the sub-titles is
prohibited on the DVD.
The sub-titles cannot be turned off when you play a DVD.
/Depending on the DVD, you may not be able to
turn the sub-titles off.
The angles cannot be changed when you play a DVD.
/Multi-angles are not recorded on the DVD.
/Change the angles when “ANGLE” appears on
the front panel display. (page 29)
/Changing the angles is prohibited on the DVD.
The aspect ratio of the screen cannot be changed even
though you set “TV TYPE” in “INITIAL SETUP 1” in the
setup display when you play a wide picture.
/The aspect ratio is fixed on your DVD.
The menu screen does not appear when you play a VIDEO
CD.
/The VIDEO CD does not feature PBC functions.
/Follow the correct operating procedure. (Also
refer to the instructions supplied with the disc.)
40EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-diagnosis function
In the self-diagnosis function works to prevent the CD/ DVD player from
malfunctioning, a five-digit service number (combination of a letter and
figures) flashes on the screen. In this case, check the following table.
C:13:00
Cause and/or Corrective Action
First three digits
•
The disc is dirty.
C13
/ Clean the disc with a cleaning cloth. (page 38)
C31
•
The disc is not inserted correctly.
/ Open the disc tray and insert the disc correctly.
Exx (xx is any number)
•
To prevent the player from operating malfunctioning, the self-diagnosis function has
worked.
/ When you contact your Sony dealer or local authorized Sony service facility, inform
the service number with five digits. (example: E:61:10)
41EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Specifications
Glossary
CD/DVD player
Bit rate
Signal format system
PAL/ NTSC
Value indicating the amount of video data compressed
in a DVD per second. The unit is Mbps (Mega bit per
second). 1 Mbps indicates that the data per second is
1,000,000 bits. The higher the bit rate is, the larger the
amount of data. However, this does not always mean
that you can get higher quality pictures.
Audio characteristics
Frequency response
DVD (PCM96kHz): 2 Hz to 44 kHz
(±0.5 dB)*
DVD (PCM48kHz): 2 Hz to 22 kHz
(±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
More than 110 dB (LINE OUT (AUDIO
1, 2) connectors only)
Less than 0.0028%
DVD: More than 100 dB
CD: More than 97 dB
Less than detected value
(±0.001% W PEAK)
Signal-to-noise ratio
Chapter
Harmonic distortion
Dynamic range
Sections of a picture or a music piece on a DVD that are
smaller than titles. A title is composed of several
chapters. Each chapter is assigned a chapter number
enabling you to locate the chapter you want.
Wow and flutter
Outputs and inputs
Dolby Digital (AC-3)
Load impedance
Output
level
Jack
type
Digital audio compression technology that the Dolby
Laboratories Corporation developed. This technology
conforms to 5.1-channel surround. The rear channel is
stereo and there is discrete subwoofer channel in this
format. The good channel separation is realized
because the all channel data is recorded discrete and
processed in digital.
Over 10 kilohms
2 Vrms
(at 50 kilohms)
LINE OUT
(AUDIO 1, 2) jacks
Phono
Wave length: 660 nm
75 ohms terminated
–18 dBm
DIGITAL OUT Optical
(OPTICAL)
output
connector
0.5 Vp-p
DIGITAL OUT Phono
(COAXIAL)
jacks
Dolby Pro Logic
75 ohms,
1.0 Vp-p
LINE OUT
Phono
Audio signal processing technology that Dolby
Laboratories Corporation developed for surround
sound. When the input signal has the surround
component, the Pro Logic process outputs the front,
center and rear signals. The rear channel is monaural.
sync negative
(VIDEO 1, 2) jack
75 ohms,
sync negative
75 ohms terminated
Y: 1.0 Vp-p
S VIDEO OUT 4-pin mini
1, 2
DIN
C: 0.3 Vp-p
12 mW
32 ohms
PHONES
Phone
jack
DVD
General
A disc that contains up to 8 hours of moving pictures
even though its diameter is the same as a CD.
The data capacity of a single-layer and single-sided
DVD, at 4.7 GB (Giga Byte), is 7 times that of a CD.
Furthermore, the data capacity of a dual-layer and
single-sided DVD is 8.5 GB, a single-layer and double-
sided DVD 9.4 GB, and a dual-layer and double-sided
DVD 17 GB.
Power requirements
220 to 240 V AC, 50 Hz
110 to 240 V AC, 50/ 60 Hz
See page 2 for further informations.
18 W
280 × 91 × 333 mm (w/ h/ d)
incl. projecting parts
3.4 kg
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
5 ˚C to 35 ˚C
5% to 90%
The picture data uses the MPEG 2 format, one of the
worldwide standards of digital compression
technology. The picture data is compressed to about
1/ 40 of its original size. The DVD also uses the variable
rate coding technology that changes the data to be
allocated according to the status of the picture.
The audio data is recorded in Dolby Digital (AC-3) as
well as in PCM, allowing you to enjoy more real audio
presence.
Supplied accessories
See page 6.
* When you play the PCM sound tracks with 96 kHz sampling
frequency, the output signals from the DIGITAL OUT
(OPTICAL, COAXIAL) connectors are converted to 48 kHz
(sampling frequency) / 16 bits (quantization bits).
Design and specifications are subject to change without notice.
Furthermore, various advanced functions such as the
multi-angle, multilingual, and Parental Control
functions are provided with the DVD.
42EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Control
A function of the DVD to limit playback of the disc by
the age of the users according to the limitation level in
each country. The limitation varies from disc to disc;
when it is activated, playback is completely prohibited,
violent scenes are skipped or replaced with other
scenes and so on.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version 2.0) to control
playback.
By using menu screens recorded on VIDEO CDs with
PBC functions, you can enjoy playing simple
interactive programs, programs with search functions,
and so on.
Title
The longest sections of a picture or a music piece on a
DVD; a movie, etc., for a picture piece on video
software; or an album, etc., for a music piece on an
audio software. Each title is assigned a title number
enabling you to locate the title you want.
Track
Sections of a picture or a music piece on a CD or
VIDEO CD. Each track is assigned a track number
enabling you to locate the track you want.
VIDEO CD
A compact disc that contains moving pictures.
The picture data uses the MPEG 1 format, one of the
worldwide standards of digital compression
technology. The picture data is compressed to about
1/ 140 of its original size. Consequently, a 12 cm
VIDEO CD can contain up to 74 minutes of moving
pictures.
VIDEO CDs also contain compact audio data. Sounds
outside the range of human hearing are compressed
while the sounds we can hear are not compressed.
VIDEO CDs can hold 6 times the audio information of
conventional audio CDs.
There are 2 versions of VIDEO CDs.
• Version 1.1: You can play only moving pictures and
sounds.
• Version 2.0: You can play high-resolution still
pictures and enjoy PBC functions.
This player conforms to both versions.
43EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Index to Parts and Controls
Refer to the pages indicated in parentheses for details.
Front Panel
1 g (remote sensor) (6)
!£ CLEAR button (22-25)
Accepts the remote control signals.
Press to return to the continuous play etc.
2 POWER switch and indicator (10, 14)
!¢ REPEAT button (22)
Turns on and off the power of the player.
Press to execute the repeat play.
3 +NEXT button (11, 15)
!∞ =PREV button (11, 15)
Press to go to the next chapter or track.
Press to go back to the preceding chapter or track.
4 Disc tray (10, 14)
!§ Front Panel Display (20)
Place a disc on the tray.
Indicates the playing time, etc.
5 Disc type indicators (20)
!¶ ∏PAUSE button (11, 15)
The respective indicator of the disc loaded lights up.
Pauses playing a disc.
6 §OPEN/CLOSE button (10, 14)
!• pSTOP button (11, 15)
Opens or closes the disc tray.
Stops playing a disc.
7 Click shuttle (12, 16)
!ª ·PLAY/SELECT button (10, 14)
Changes the playback speed.
Plays a disc.
8 ?/>/.///ENTER button
@º PHONES connector (10, 14)
Selects and executes the items or settings.
Connect the headphones to this connector.
9 JOG button/indicator (12, 16)
@¡ PHONE LEVEL control (10, 14)
Press to play a disc frame by frame.
Adjusts the headphone volume.
!º TITLE button (13)
@™ DVD MENU button (13)
Displays the title menu on the TV screen.
Displays the DVD menu on the TV screen.
!¡ SHUFFLE button (24)
@£ ˆRETURN button (17)
Press to execute the shuffle play.
Press to return to the preceding selection screen, etc.
!™ PROGRAM button (24)
Press to execute the program play.
44EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
1 LINE OUT (AUDIO 1, 2) connectors (7)
Connects to the audio input connector on the TV or
amplifier.
2 LINE OUT (VIDEO 1, 2) connectors (7)
Connects to the video input connector on the TV or
monitor.
3 S VIDEO OUT 1, 2 connectors (7)
Connects to the S video input connector on the TV or
VCR.
4 DIGITAL OUT (OPTICAL) connector (8)
Connects to an audio component using the optical digital
connecting cord.
5 DIGITAL OUT (COAXIAL) connector (8)
Connects to an audio component using the coaxial digital
connection cord.
45EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
!º ANGLE CHANGE button (29)
Remote
Changes the angles when playing a DVD.
!¡ =/+PREV/NEXT buttons (11, 15)
Press to go to the next chapter or track or to go back to the
preceding chapter or track.
!™ C/c INDEX SEARCH buttons (15)
Press to go to the next index or to go back to the preceding
index.
1
4
7
2
5
8
0
3
6
9
!£ ·PLAY/SELECT button (11, 15)
Plays a disc.
!¢ SET UP button (29, 34)
Displays the setup display on the TV screen to set or
adjust the items.
!∞ TITLE button (13)
Displays the title menu on the TV screen.
!§ Click shuttle (12, 16)
Changes the playback speed.
!¶ ?/>/.///ENTER button
Selects and executes the items or settings.
!• POWER button (10, 14)
Turns on and off the power of the player.
!ª TV operation buttons (32)
Controls Sony TVs.
@º CLEAR button (22-25)
Cancels the number selected with the number buttons.
@¡ TIME button (20, 21)
Displays the playing time of the disc, etc., on the front
panel display.
@™ REPEAT button (22)
Press to execute the repeat play.
@£ A˜B button (23)
1 DISPLAY button (18)
Press to execute the A˜B repeat play.
Displays the current playing status on the TV screen.
@¢ SUBTITLE CHANGE button (28)
2 6OPEN/CLOSE button (11, 15)
Changes the subtitles when playing a DVD.
Opens or closes the disc tray.
@∞ Amplifier operation buttons (33)
3 Number buttons (11, 15)
Controls Sony (AV) amplifiers.
Selects the items or settings.
@§ SUBTITLE ON/OFF button (28)
4 SEARCH MODE button (11, 15)
Turns the subtitles on and off when playing a DVD.
Press to select the unit for search (track, index, etc.)
@¶ pSTOP button (11, 15)
5 ENTER button
Stops playing a disc.
Executes the items or settings.
@• JOG button/indicator (12, 16)
6 DNR button (26)
Press to play a disc frame by frame.
Reduces the picture noise.
@ª ˆRETURN button (17)
7 PROGRAM button (24)
Press to return to the preceding selection screen, etc.
Press to execute the program play.
#º PPAUSE button (11, 15)
8 SHUFFLE button (24)
Pauses playing a disc.
Press to execute the shuffle play.
#¡ DVD MENU button (13)
9 AUDIO CHANGE button (27)
Displays the DVD menu on the TV screen.
Changes the sound while playing a DVD or VIDEO CD.
46EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Display Item List
Default settings are underlined.
LANGUAGE SETUP (page 35)
1
INITIAL SETUP 1 (page 36)
TV TYPE
ENGLISH
OSD
16:9
CHINESE
4:3 LETTER BOX
4:3 PAN SCAN
ENGLISH
DVD MENU
AUTO
PAL
CHINESE
COLOR SYSTEM
AUTO PLAY
SPANISH
PORTUGUESE
JAPANESE
FRENCH
NTSC
OFF
TIMER
DEMO1
DEMO2
GERMAN
ITALIAN
DUTCH
DIMMER
BRIGHT
DARK
OFF
OTHERS/
ORIGINAL
AUDIO
BACKGROUND
SCREEN SAVER
BLUE
(same as DVD MENU)
BLACK
SUBTITLE
AUDIO FOLLOW
ON
(same as DVD MENU)
OFF
PARENTAL CONTROL (page 29)
2
INITIAL SETUP 2 (page 37)
TRACK SELECTION
OFF
AUTO
SURROUND
ON
OFF
DIGITAL OUT
AUDIO DRC
AUDIO ATT
PCM
DOLBY DIGITAL / PCM
OFF
ON
OFF
ON
47EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Language Code List
For details, see page 35.
The language spellings conform to the ISO 639: 1988 (E/ F) standard.
Code
1027
1028
1032
1039
1044
1045
1051
1052
1053
1057
1059
1060
1061
1066
1067
1070
1079
1093
1097
1103
1105
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
1166
1171
1174
1181
1183
Language
Afar
Code
1186
1194
1196
1203
1209
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
1332
1334
1345
1347
1349
Language
Scots Gaelic
Galician
Code
1350
1352
1353
1356
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
1436
1463
1481
1482
1483
1489
1491
1495
1498
1501
1502
1503
1505
1506
1507
1508
1509
1511
1512
Language
Malayalam
Mongolian
Moldavian
Marathi
Code
1513
1514
1515
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
1539
1540
1543
1557
1564
1572
1581
1587
1613
1632
1665
1684
1697
1703
Language
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Abkhazian
Afrikaans
Amharic
Arabic
Guarani
Gujarati
Hausa
Malay
Hindi
Maltese
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Burmese
Nauru
Telugu
Tajik
Nepali
Thai
Dutch
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Norwegian
Occitan
Bislama
Bengali; Bangla
Tibetan
Breton
Indonesian
Icelandic
Italian
(Afan) Oromo
Oriya
Punjabi
Turkish
Tsonga
Tatar
Hebrew
Polish
Japanese
Yiddish
Pashto; Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Catalan
Corsican
Czech
Twi
Javanese
Georgian
Kazakh
Ukrainian
Urdu
Welsh
Danish
Uzbek
German
Bhutani
Greek
Greenlandic
Cambodian
Kannada
Korean
Romanian
Russian
Vietnamese
Volapük
Wolof
Kinyarwanda
Sanskrit
English
Esperanto
Spanish
Estonian
Basque
Xhosa
Kashmiri
Kurdish
Sindhi
Yoruba
Chinese
Zulu
Sangho
Kirghiz
Serbo-Croatian
Singhalese
Slovak
Latin
Not specified
Lingala
Persian
Finnish
Fiji
Laothian
Lithuanian
Latvian; Lettish
Malagasy
Maori
Slovenian
Samoan
Faroese
French
Shona
Somali
Frisian
Albanian
Serbian
Macedonian
Irish
48EN
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
I, J, K
T
Index
INITIAL SETUP 36
Title 5, 43
Title menu 13
Track 5, 43
Troubleshooting 39
L, M, N
A
LETTER BOX 36
A˜B Repeat 23
Locating
U
Adjusting
a specific point 11, 15
by monitoring 12, 16
by observing the TV
screen 12, 16
volume 10, 14
Angle 29
AUDIO ATT 37
AUDIO DRC 37
AUTO PLAY 36
Auto pause 20
Usable discs
4
V, W, X, Y, Z
VIDEO CD 14
O
On-screen display
CD 19
B
C
DVD 18
language 35
VIDEO CD 19
Batteries
6
P, Q
CD 14
Changing
PAN SCAN 36
angles 29
sound 27
subtitles 28
Parental control 29
PBC functions 17
PBC Playback 5, 17, 43
Playback
Chapter 5, 42
Color system
Connecting
Continuous play
CD 14
9
6
Continuous Play 10, 14
Program Play 24
Repeat Play 22
Shuffle Play 24
DVD 10
Program Play 24
VIDEO CD 14
R
S
D, E
Remote control 6, 32
Repeating
a specific portion 23
current title, chapter or
track 22
Display
front panel display 20
on-screen display 18
Digital output 12, 37
DNR 26
Dolby Digital (AC-3) 8, 42
DVD 10
DVD menu 13
disc 22
Resume Play 26
DVD menu language 35
Scene
5
Scene Search 15
Searching. See Locating.
Setup display
INITIAL SETUP 36
usage 34
F, G
Fast Forward 12, 16
Fast Reverse 12, 16
Front panel display
CD 20
Shuffle Play 24
DVD 20
Slow-motion Play 12, 16
VIDEO CD 20
S video output
Subtitles
7
changing 28
turning on and off 28
H
Handling discs 38
Hi-speed search 11, 15
Hooking up
6
49EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|