Sony Car Video System DVP FX820 User Manual

3-294-108-11(1)  
Portable  
CD/DVD  
Player  
US  
ES  
Operating Instructions  
Manual de instrucciones  
DVP-FX820  
©2008 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12) Use only with the cart, stand,  
tripod, bracket, or table  
specified by the  
On placement  
• Place the player in a location  
with adequate ventilation to  
prevent heat build-up in the  
player.  
• Do not place the player in a  
confined space such as a  
Precautions  
manufacturer, or sold with  
the apparatus. When a cart is  
used, use caution when  
moving the cart/apparatus  
combination to avoid injury  
from tip-over.  
Road safety  
Do not use the monitor unit and  
headphones while driving, cycling,  
or operating any motorized  
vehicle. Doing so may create a  
traffic hazard and is illegal in some  
areas. It can also be potentially  
dangerous to play your headsets at  
high volume while walking,  
especially at pedestrian crossings.  
You should exercise extreme  
caution or discontinue use in  
potentially hazardous situations.  
bookshelf or similar unit.  
• Do not cover the ventilation of  
the player with newspapers,  
tablecloths, curtains, etc. And do  
not place the player on a soft  
surface, such as a rug.  
• Do not place the player in a  
location near heat sources, or in a  
place subject to direct sunlight,  
excessive dust, sand, moisture,  
rain, or mechanical shock, or in a  
car with its windows closed.  
• Do not place the player in an  
inclined position. It is designed  
to be operated in a horizontal  
position only.  
13) Unplug thisapparatus during  
lightning storms or when  
unused for long periods of  
time.  
14) Refer all servicing to  
qualified service personnel.  
Servicing is required when  
the apparatus has been  
damaged in any way, such as  
power-supply cord or plug is  
damaged, liquid has been  
spilled or objects have fallen  
into the apparatus, the  
On safety  
Should any solid object or liquid  
fall into the cabinet, unplug the  
player and have it checked by  
qualified personnel before  
operating it any further.  
• Keep the player and discs away  
from equipment with strong  
magnet, such as microwave  
ovens, or large loudspeakers.  
• Do not place heavy objects on  
the player.  
On power sources  
• The power requirements of this  
unit are indicated on the AC  
adaptor. Check that the unit’s  
operating voltage is identical  
with your local power supply.  
• If you are not going to use the  
player for a long time, be sure to  
disconnect the player from the  
wall outlet. To disconnect the  
AC power cord, grasp the plug  
itself; never pull the cord.  
• Do not touch the AC power cord  
or the AC adaptor with wet  
hands. Doing so may cause  
shock hazard.  
apparatus has been exposed  
to rain or moisture, does not  
operate normally, or has  
been dropped.  
On operation  
• If the player is brought directly  
from a cold to a warm location,  
or is placed in a very damp room,  
moisture may condense on the  
lenses inside the player. Should  
this occur, the player may not  
operate properly. In this case,  
remove the disc and leave the  
player turned on for about half an  
hour until the moisture  
RECYCLING LITHIUM-  
ION BATTERIES  
Lithium-Ion  
batteries are  
recyclable.  
You can help  
preserve our  
evaporates.  
• Use a commercially available  
AC plug adaptor, if necessary,  
depending on the design of the  
wall outlet.  
• Keep the lens on the player clean  
and do not touch it. Touching the  
lens may damage the lens and  
cause the player to malfunction.  
Leave the disc lid closed except  
when you insert or remove discs.  
environment by  
returning your used rechargeable  
batteries to the collection and  
recycling location nearest you.  
AC power cord  
(supplied)  
Wall  
For more information regarding  
recycling ofrechargeable batteries,  
call toll free  
outlet  
On Liquid Crystal Display  
1-800-822-8837, or visit  
• Although manufactured with  
high precision technology, the  
LCD may occasionally display  
dots of various colors. That is not  
a malfunction.  
AC plug adaptor  
(not supplied)  
Caution: Do not handle damaged  
or leaking Lithium-Ion batteries.  
• Do not wipe the LCD surface  
with wet cloth. If water enters, a  
malfunction may result.  
• Do not place or drop any object  
onto the LCD surface. Also, do  
not apply pressure from hands or  
elbows.  
For the State of California,  
USA only  
Perchlorate Material – special  
handling may apply, See  
perchlorate  
On temperature increases  
Heat may build up inside the player  
during charging or if it is being  
used for a long time. This is not a  
malfunction.  
Perchlorate Material: Lithium  
battery contains perchlorate.  
• Do not damage the LCD surface  
with a sharp edged tool.  
• Do not close the LCD panel with  
a pen, etc., on the disc lid.  
,continued  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
• If the player is brought directly  
from a cold to a warm location,  
moisture may condense over the  
LCD surface. In which case,  
wipe out the moisture with tissue  
paper, etc., before use.  
However,moisturecondensation  
will continue if the LCD surface  
is cold. Wait until the surface  
warms to room temperature.  
On cleaning  
Clean the cabinet, panel, and  
controls with a soft cloth slightly  
moistened with a mild detergent  
solution. Do not use any type of  
abrasive pad, scouring powder or  
solvent such as alcohol or benzine.  
Bottom of the player  
B
On cleaning discs, disc/  
lens cleaners  
A
Battery pack  
D
Do not use cleaning discs or disc/  
lens cleaners (including wet or  
spray types). These may cause  
the apparatus to malfunction.  
On AC adaptor  
• Use the supplied AC adaptor for  
this player, as other adaptors  
may cause a malfunction.  
• Do not disassemble or reverse-  
engineer.  
• Do not drop or apply shock.  
• Do not confine the AC adaptor in  
a closed place such as a  
bookshelf or an AV cabinet.  
• Do not connect the AC adaptor  
to a traveler’s electric  
transformer, which may generate  
heat and cause a malfunction.  
IMPORTANT NOTICE  
Caution: This player is capable  
of holding a still video image or  
on-screen display image on your  
television screen indefinitely. If  
you leave the still video image or  
on-screen display image  
displayed on your TV for an  
extended period of time you risk  
permanent damage to your  
television screen. Plasma  
C
On car adaptor  
• Use the supplied car adaptor for  
this player, as other adaptors  
may cause a malfunction.  
• Do not dissemble or reverse-  
engineer.  
• Do not drop or apply shock.  
• Do not touch the metal parts, as  
it may cause a short and damage  
the car adaptor, especially if  
touched by other metal objects.  
• Do not place the car adaptor in a  
location near heat sources, or in a  
place subject to direct sunlight or  
mechanical shock, or in a car  
with its windows closed.  
On battery pack  
• Certain countries may regulate  
disposal of the battery used to  
power this product. Please  
consult with your local authority.  
• Because of the battery’s limited  
life, its capacity gradually  
display panel televisions and  
projection televisions are  
susceptible to this.  
If you have any questions or  
problems concerning your player,  
please consult your nearest Sony  
dealer.  
deteriorates over time and  
repeated use. Purchase a new one  
when the battery holds about  
only half the normal period.  
• The battery may not be charged  
to its fullest capacity when  
charged for the first time, or  
when it has not been used for a  
long time. The capacity recovers  
after being charged and  
On adjusting volume  
Do not turn up the volume while  
listening to a section with very low  
level inputs or no audio signals. If  
you do, the speakers may be  
damaged when a peak level section  
is played.  
discharged several times.  
• Do not leave the battery pack in  
a car or direct sunlight, where  
temperature goes up above  
60 ºC (140°F).  
On headphones  
• Do not expose to water.  
Preventing hearing damage  
Avoid using headphones at high  
volumes. Hearing experts advice  
against continuous, loud, and  
extended play. If you experience a  
ringing in your ears, reduce the  
volume or discontinue use.  
Showing consideration for  
others  
Keep the volume at a moderate  
level. This will allow you to hear  
outside sounds and still be  
considerate to the people around  
you.  
• Avoid short-circuiting the  
battery connecting jacks (A)  
located on the bottom of the  
player and the connecting jacks  
(C) on the battery pack with  
metal objects such as a necklace.  
• Make sure dust or sand does not  
enter the battery connecting  
jacks (A) and the guide holes (B)  
located on the bottom of the  
player, and the connecting jacks  
(C) and the guide holes (D) on  
the battery pack.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Searching for a Particular Point on a Disc (Search, Scan, Slow Play, Repeat  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
About This Manual  
• Instructions in this manual describe the controls on the remote. You can also use the  
controls on the player if they have the same or similar names as those on the remote.  
• “DVD” may be used as a general term for DVD VIDEOs, DVD+RWs/DVD+Rs (+VR  
mode) and DVD-RWs/DVD-Rs (video mode).  
• The meaning of the icons used in this manual is described below:  
Icons  
Meaning  
Functions available for DVD VIDEOs and DVD+RWs/DVD+Rs in +VR  
mode or DVD-RWs/DVD-Rs in video mode  
Functions available for music CDs or CD-Rs/CD-RWs in music CD format  
Functions available for DATA CDs (CD-ROMs/CD-Rs/CD-RWs  
*
containing MP3 audio tracks, and JPEG image files)  
Functions available for DATA DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/  
DVD-RWs/DVD-Rs containing MP3* audio tracks, and JPEG image files  
)
*
MP3 (MPEG-1 Audio Layer III) is a standard format defined by ISO (International Organization for  
Standardization)/IEC (International Electrotechnical Commission) MPEG which compresses audio  
data.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Example of discs that the player  
cannot play  
The player cannot play the following discs:  
• Blu-ray discs.  
This Player Can Play the  
Following Discs  
• Discs recorded in AVCHD format.  
• HD DVDs.  
• DVD-RAMs.  
Format of discs  
DVD VIDEO  
• CD-ROMs/CD-Rs/CD-RWs other than  
those recorded in the formats listed on this  
page.  
• CD-ROMs recorded in PHOTO CD format.  
• Data part of CD-Extras.  
DVD-RW/-R  
(finalized disc)  
DVD+RW/+R  
(finalized disc)  
• DVD Audio discs.  
• DATA DVDs that do not contain MP3  
audio tracks or JPEG image files.  
• HD layer on Super Audio CDs.  
Also, the player cannot play the following  
discs:  
Music CD  
• A DVD VIDEO with a different region  
code.  
• A disc recorded in a color system other than  
NTSC, such as PAL or SECAM.  
• A disc that has a non-standard shape (e.g.,  
card, heart).  
CD-RW/-R  
• A disc with paper or stickers on it.  
• A disc that has the adhesive of cellophane  
tape or a sticker still left on it.  
“DVD+RW,” “DVD-RW,” “DVD+R,”  
“DVD-R,” “DVD VIDEO,” and “CD” logos  
are trademarks.  
Notes  
Note about CDs/DVDs  
The player can play CD-ROMs/CD-Rs/CD-  
RWs recorded in the following formats:  
– music CD format  
– MP3 audio tracks and JPEG image files of  
format conforming to ISO 9660* Level 1,  
or its extended format, Joliet  
Notes about DVD+RWs/DVD+Rs, DVD-RWs/  
DVD-Rs or CD-Rs/CD-RWs  
Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-  
Rs, or CD-Rs/CD-RWs cannot be played on this  
player due to the recording quality or physical  
condition of the disc, or the characteristics of the  
recording device and authoring software.  
The disc will not play if it has not been  
correctly finalized. For more information, refer  
to the operating instructions for the recording  
device. Note that some playback functions may  
not work with some DVD+RWs/DVD+Rs, even  
if they have been correctly finalized. In this case,  
view the disc by normal playback. Also some  
DATA CDs/DATA DVDs created in Packet  
Write format or multiple sessions cannot be  
played.  
– KODAK Picture CD format  
* A logical format of files and folders on CD-  
ROMs, defined by ISO (International  
Organization for Standardization).  
The player can play DVD-ROMs/  
DVD+RWs/DVD-RWs/DVD+Rs/DVD-Rs  
recorded in the following format:  
– MP3 audio tracks and JPEG image files of  
format conforming to UDF (Universal Disk  
Format).  
Notes about DVD+R DLs/DVD-R DLs  
MP3 and JPEG files recorded on the second layer  
of a DVD+R DL/-R DL (double layered) may not  
be playable.  
,continued  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Music discs encoded with copyright protection  
technologies  
Trademarks  
• Manufactured under license from Dolby  
Laboratories.  
Dolby and the double-D symbol are  
trademarks of Dolby Laboratories.  
• Manufactured under license under U.S.  
Patent #: 5,451,942 & other U.S. and  
worldwide patents issued & pending. DTS  
and DTS Digital Out are registered  
trademarks and the DTS logos and Symbol  
are trademarks of DTS, Inc. ©1996-2007  
DTS, Inc. All Rights Reserved.  
This product is designed to playback discs that  
conform to the Compact Disc (CD) standard.  
Recently, various music discs encoded with  
copyright protection technologies are marketed  
by some record companies. Please be aware that  
among those discs, there are some that do not  
conform to the CD standard and may not be  
playable by this product.  
• Note on DualDiscs  
A DualDisc is a two sided disc product which  
mates DVD recorded material on one side with  
digital audio material on the other side.  
However, since the audio material side does not  
conform to the Compact Disc (CD) standard,  
playback on this product is not guaranteed.  
Region code  
It is the system that is used to protect  
copyrights. The region code is shown on the  
DVD VIDEO packages according to the  
region of sale. DVD VIDEOs labeled “ALL”  
or “1” will play on this player.  
ALL  
Note on playback operations of  
DVDs  
Some playback operations of DVDs may be  
intentionally set by software producers. Since  
this player plays DVDs according to the disc  
contents the software producers designed,  
some playback features may not be available.  
Also, refer to the instructions supplied with  
the DVDs.  
Copyrights  
This product incorporates copyright  
protection technology that is protected by  
U.S. patents and other intellectual property  
rights. Use of this copyright protection  
technology must be authorized by  
Macrovision, and is intended for home and  
other limited viewing uses only unless  
otherwise authorized by Macrovision.  
Reverse engineering or disassembly is  
prohibited.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preparations  
Checking the Accessories  
Check that you have the following items:  
• Audio/video cord (mini plug × 2 y phono  
plug × 3) (1)  
• Car battery adaptor (1)  
• Battery pack (NP-FX110) (1)  
• Remote (with battery) (1)  
• AC power cord (1)  
• AC adaptor (1)  
Using the Remote  
When operating, point it at the remote sensor  
on the player.  
To replace the remote control battery  
Insert a lithium battery CR2025 matching the 3 and # ends of the battery.  
1
Pull out the battery holder (2) while  
pressing the lock lever (1).  
3
Insert the new battery in the battery  
holder with the 3 side up and then push  
the holder fully.  
2
Remove the old battery.  
Notes  
• Do not expose the remote sensor  
malfunction.  
to direct sunlight or a lighting apparatus. Doing so may cause a  
• No button operation can be made, when the battery drains. If the remote does not work at all, change the  
battery and check the status.  
WARNING  
Battery may explode if mistreated.  
Do not recharge, disassemble or dispose of in fire.  
CAUTION  
Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Using the LCD Panel  
The LCD panel of the player can rotate a maximum of 180 degrees clockwise and still be used.  
After rotation of the LCD panel, it can be folded down on the main body of the player and still  
function.  
Rotating the LCD panel  
1 Place the player on a table or other flat stable surface.  
2 Push the LCD panel up with your thumbs until it is open to the vertical position.  
3 Slowly rotate the LCD panel 180 degrees in the direction indicated by the arrow  
(clockwise).  
Rotating and folding down the LCD panel  
After rotating the LCD panel 180 degrees clockwise push the LCD panel down onto the main  
body of the player. In this position the panel is facing up.  
To return the LCD panel to its original position  
Open the LCD panel to the vertical position and rotate the LCD panel counter-clockwise slowly.  
Notes  
• Do not rotate the LCD panel over 180 degrees. In addition, do not rotate in the opposite direction. Doing  
so will break the LCD panel.  
• If the LCD panel does not fully open, do not further rotate it. The LCD panel may become damaged.  
• Return the LCD panel to its original positions after use. The LCD screen can be damaged by sudden shocks  
or similar treatment.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting the AC Adaptor  
Connect the AC adaptor (supplied) in the order of 1 to 3 below.  
To disconnect, follow the steps in reverse order.  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
LINE SELECT IN OUT  
DC IN  
9.5V  
A
B
To DC IN 9.5 V jack  
DC plug  
2
AC Adaptor  
(supplied)  
AC power cord (supplied)  
1
3
To a wall outlet  
Note  
Stop playback before disconnecting the AC power cord. Failure to do so may cause a malfunction.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using with the Battery Pack  
When an AC power connection is not available, the player can be enjoyed with the battery pack  
(supplied) installed.  
Please charge the battery pack before using it.  
Installing the battery pack  
1 Aligning the battery pack with the lines on the player’s bottom, engage the hooks of  
the battery pack in the holes on the bottom of the player.  
2 Slide the battery pack in the direction of the arrow until it clicks into place.  
Battery pack  
Bottom of the player  
To remove the battery pack  
Push the release knob and slide the battery pack in the direction of the arrow.  
Release knob  
Notes  
• Turn the player off before installing the battery pack.  
• Do not remove the battery pack during playback.  
• Do not touch the connecting points of the player and the battery pack. Doing so may cause a malfunction.  
• Be careful not to drop the battery pack when installing and removing it.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Charging the battery pack  
1 Attach the battery pack to the player (page 12).  
2 Connect the AC adaptor to the player, and then connect the AC power cord into a wall  
outlet (page 11).  
CHARGE indicator  
DC IN 9.5 V jack  
HOLD  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
DC IN  
9.5V  
LINE SELECT IN OUT  
A
B
POWER CHARGE  
Player  
Battery pack  
When charging begins, the CHARGE indicator turns on.  
When charging ends, the CHARGE indicator turns off.  
3 After charging is finished, disconnect the AC power cord from the wall outlet and  
remove the AC adaptor.  
To check the battery level  
When the player is stopped, a battery indicator is displayed on the screen. Recharge the battery,  
when  
is displayed or the CHARGE indicator flashes.  
Full  
Exhausted  
The battery indicator is not displayed when a DVD or JPEG file are being played. Stop the player  
and check the battery level.  
Charging time and maximum playing time  
Charging time (with the player turned off) Playing time (with the display turned on)  
Approx.  
6 hours  
Approx.  
6 hours*  
* This is the indication of the longest continuous playback on the following conditions.  
– normal temperature (20°C (68°F))  
– Headphone Use  
– Set Backlight Adjustment to the Minimum  
– Set “Digital Output” to “Off” in “Audio Setup.”  
Battery condition may reduce operating time.  
Notes  
• The battery indicator does not appear on the screen when the AC adaptor is used or when inputting from  
external sources.  
• Charging times may differ from that indicated above due to conditions of use, environment, and other  
factors. The recommended charge up surrounding temperature is in the 10-30°C (50-86°F) range.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using with the Car Battery Adaptor  
Use the car battery adaptor (supplied) to supply power from the cigarette lighter socket to the  
player. The adaptor is for a 12V car battery. Do not use it with a 24V car battery. The adaptor is  
also for use with negatively grounded cars. Do not use it with cars grounded positively.  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
LINE SELECT IN OUT  
DC IN  
9.5V  
A
B
To cigarette lighter socket  
To DC IN 9.5V jack  
Car battery adaptor (supplied)  
z Hint  
If the car adaptor interferes with car operation, use a commercial cigarette lighter extension cord.  
Notes  
• Do not use the car adaptor if it has been dropped or damaged.  
• Arrange the cord so as not to interfere with the driver. Also, do not place the LCD panel where the driver  
can watch.  
• If the picture is not clear, keep the player away from the car battery adaptor.  
• Use the car battery adaptor with the car engine running. If it is used with the car engine off, the car battery  
may become unusable.  
• If the cigarette lighter socket is dirty with ash, etc, a bad connection may cause the plug to heat up. Always  
clean well before use.  
• The car battery adaptor may heat up while charging or after a long period of use. That is not a malfunction.  
After using the car battery adaptor  
After turning the player off, disconnect the car battery adaptor from the cigarette lighter socket.  
Notes  
• Do not turn off the car engine while the player is turned on. Doing so stops the power supply and may cause  
damage to the player.  
• Disconnect the car battery adaptor after use. Since some cars supply power to the cigarette lighter socket  
even when the engine is turned off, the car battery may discharge over time.  
• When disconnecting the car battery adaptor, hold the plug to pull it out.  
• When listening to the car radio, disconnect the car battery adaptor from the cigarette lighter socket to avoid  
noise.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Press [/1 on the remote or slide  
the [/1/HOLD switch of the player  
to “[/1.”  
Playing Discs  
The player turns on and the power  
indicator lights up in green.  
Playing Discs  
3
4
Press OPEN to open the disc lid.  
Insert the disc to be played.  
Push with the playback side down until it  
clicks.  
Depending on the DVD, some operations  
may be different or restricted.  
Refer to the operating instructions supplied  
with the disc.  
Connect the AC adaptor or install the battery  
pack.  
x
H
VOL  
DISPLAY  
MENU  
RETURN  
OPTIONS  
POWER CHARGE  
Playback side facing down  
OPEN  
5
6
Push the PUSH CLOSE on the  
player to shut the disc lid.  
PO  
WER  
CHARGE  
D
L
O
H
Press H.  
Playback starts.  
OPEN \/1/HOLD  
• Some discs may start playing  
automatically after the disc lid is shut.  
• Depending on the disc, a menu may  
appear on the screen. See page 17 for  
details.  
• After all titles have been played, the  
player will stop itself and the display  
will return to the menu screen.  
\/1  
1
4
7
2
5
8
0
3
6
9
H
x
Notes  
• If the disc is inserted with playback side up, a “No  
Disc” or “Cannot play this disc.” message  
appears.  
• Discs created on DVD recorders must be correctly  
finalized to play on this player. For more  
information about finalizing, refer to the  
operating instructions supplied with the DVD  
recorder.  
1
Open the player’s LCD panel.  
Set the LINE SELECT switch on the  
player’s right side to “OUT.”  
• The disc may be still spinning when the disc lid is  
opened. Wait until the spinning stops before  
removing the disc.  
,continued  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
• During operation, “ ” may appear on the screen.  
This symbol indicates that a function explained in  
this operating instruction is not available on the  
current DVD VIDEO.  
Additional playback operations  
To stop playback  
1
4
7
2
5
8
0
3
6
9
Press x.  
Pressing H again will start playback from  
the point you stopped (Resume Play). See  
page 17 for details.  
To play from the beginning, press x twice,  
then press H.  
.
X
>
x
To turn off the power  
Press the remote’s \/1 button or slide the  
player’s \/1/HOLD switch to “\/1.”  
To  
Operation  
Press x  
To avoid accidental button operation on  
the player  
Set the player’s \/1/HOLD switch to  
“HOLD.” All the buttons on the player are  
locked, while the button on the remote  
remains operable.  
Stop  
Pause  
Press X  
Go to the next chapter, Press >  
track, or scene in  
continuous play mode  
Go back to the  
Press .  
previous chapter,  
track, or scene in  
continuous play mode  
To play DTS sound tracks on a DVD VIDEO  
• The player’s speaker does not output DTS  
sound. When you play DTS sound tracks on  
a DVD VIDEO, connect the player to an  
AV amplifier (receiver) (page 35) and set  
up “DTS” in “Audio Setup” (page 31).  
• If you connect the player to audio  
Briefly fast forward  
the current scene*  
Press  
playback.  
during  
* DVD VIDEOs only.  
The above functions may not be used for some  
scenes.  
equipment such as an AV amplifier  
(receiver) without a DTS decoder, do not set  
“DTS” to “On” in “Audio Setup” (page 31).  
A loud noise may come out from the  
speakers, which may affect your ears or  
cause speaker damage.  
Notes  
• A screen saver image appears when you leave the  
player in pause or stop without operation for more  
than 15 minutes. The image disappears when you  
press H. See page 30 for details.  
• The player turns off, 15 minutes after starting the  
screen saver function (Auto Power Off).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Resuming playback from the  
point where you stopped the disc  
(Resume Play)  
Using the DVD’s menu  
A DVD is divided into long sections of a  
picture or a music feature called “titles.”  
When you play a DVD containing several  
titles, you can select the title you want using  
the TOP MENU button.  
When you play DVDs that allow you to select  
items such as language for the sound and  
subtitles, select these items using the MENU  
button.  
When you stop playback, the player  
remembers the stop point and displays a  
message on the screen. You can resume from  
the same point by pressing H again. Resume  
Play works even after the player is turned off,  
as long as the disc lid is kept closed.  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
Number  
buttons  
MENU  
TOP MENU  
H
C/X/x/c  
ENTER  
x
1 While playing a disc, press x to stop  
playback.  
1 Press TOP MENU or MENU.  
The disc’s menu appears on the screen.  
The contents of the menu vary from disc  
to disc.  
A message appears.  
2 Press H.  
The player starts playback from the point  
you stopped in step 1.  
2 Press C/X/x/c or the number buttons  
to select the item you want to play or  
change.  
z Hints  
3 Press ENTER.  
• To play from the beginning of the disc, press x  
twice, then press H.  
• When turning power on again after power off,  
resume play starts automatically.  
Note  
Depending on the disc, you may not be able to use  
C/c of the player for the disc menu. In this case, use  
C/c on the remote.  
Notes  
• Depending on the stop point, Resume play may  
not start from exactly the same point.  
• The point where you stopped playing is cleared  
when:  
– you open the disc lid.  
– you disconnect the battery pack and the AC  
adaptor.  
– you change the LINE SELECT switch setting.  
,continued  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Notes  
Changing the sound  
• Depending on the disc, you may not be able to  
change the audio format, even if it is recorded in  
multiple audio formats.  
• If “DTS” in “Audio Setup” is set to “Off”  
(page 31), the DTS track selection option will not  
appear on the screen even if the disc contains DTS  
tracks.  
When playing a DVD VIDEO recorded in  
multiple audio formats (PCM, Dolby Digital,  
or DTS), you can change the audio format. If  
the DVD VIDEO is recorded with  
multilingual tracks, you can also change the  
language.  
• When playing DTS sound tracks on a CD, you  
cannot change the sound.  
With CDs, you can select the sound from  
either the right or left channel and listen to the  
sound of the selected channel through both  
the right and left speakers. For example, when  
playing a disc containing a song with the  
vocals on the right channel and the  
instruments on the left channel, you can hear  
the instruments from both speakers by  
selecting the left channel.  
1
4
7
2
5
8
0
3
6
9
AUDIO  
1 Press AUDIO repeatedly to select the  
desired audio signal.  
The default setting is underlined.  
When playing a DVD VIDEO  
Depending on the DVD VIDEO, the  
choice of language varies.  
When the same language is displayed two  
or more times, the DVD VIDEO is  
recorded in multiple audio formats.  
When playing a CD  
• Stereo: the standard stereo sound  
• Left: the sound of the left channel  
(monaural)  
• Right: the sound of the right channel  
(monaural)  
z Hints  
• You can check of the current audio format (Dolby  
Digital, DTS, PCM, etc.) by pressing AUDIO  
repeatedly while playing a DVD VIDEO.  
• You can switch the sound in the Playback Settings  
Display while playing a DVD (page 20).  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Displaying the subtitles  
Changing the angles  
If subtitles are recorded on the disc, you can  
change the subtitles or turn them on and off  
whenever you want while playing a DVD.  
If various angles (multi-angles) for a scene  
are recorded on the DVD VIDEO, “  
appears on the screen. This means that you  
can change the viewing angle.  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
SUBTITLE  
ANGLE  
1 Press SUBTITLE repeatedly to select a  
setting.  
1 Press ANGLE repeatedly to select an  
angle number.  
Depending on the disc, the choice of  
language varies.  
The scene changes to the selected angle.  
To turn off the subtitles  
Select “Subtitle Off” in step 1.  
Notes  
• Some DVD VIDEOs prohibit changing angles  
even when multi-angles are recorded.  
• You cannot change angles during Slow Play or  
Scan Play.  
z Hint  
You can switch the subtitles in the Playback  
Settings Display while playing a DVD (page 20).  
• “  
” (angle mark) does not appear when  
“Angle Mark” in “General Setup” is set to “Off”  
Notes  
• Depending on the DVD VIDEO, you may not be  
able to change the subtitles even if multilingual  
subtitles are recorded on it. You also may not be  
able to turn them off.  
• While you play a disc with subtitles, the subtitle  
may disappear when you press  
.
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
• T.Time  
• C.Time  
• Repeat  
Using the Playback  
Settings Display  
• Time Disp.  
3
Press X/x to select the setting,  
and press ENTER.  
To enter numbers, use the number  
buttons or X/x.  
While playing a DVD, you can check the  
current playback settings on the screen. The  
Playback Settings Display also allows you to  
change sound, subtitle, and angle or search  
for a title or track by inputting numbers.  
Note  
DISPLAY  
Depending on the disc, you may not be able to set  
some options.  
1
4
7
2
5
8
0
3
6
9
Number  
buttons  
To turn off the display  
Press DISPLAY or O RETURN.  
C/X/x/c  
ENTER  
O
Searching for a title/chapter,  
etc.  
By entering the number or the time code, you  
can search a DVD by title or chapter.  
1
Press DISPLAY while playing a  
DVD.  
The Playback Settings Display appears.  
Example: When playing a DVD VIDEO  
1 Press X/x to select the search method  
on the Playback Settings Display, and  
press ENTER.  
• Title  
• Chapter  
• T.Time*  
Items  
Current playback settings  
• C.Time*  
* You can search the title or chapter of a DVD  
VIDEO by entering the time code.  
2 Press the number buttons or X/x to  
select the title or chapter number, and  
press ENTER.  
Menu  
Title  
02/07  
Chapter  
Audio  
03/20  
02 2CH DOLBY DIGITAL English  
01 English  
Subtitle  
The player starts playback from the  
selected number.  
Title Elapsed 00:12:01  
When you select “T.Time” or “C.Time” in  
step 1, “00:00:00” will appear on the screen.  
Enter the desired time code using the number  
buttons, and press ENTER. Playback starts  
from the entered time code. Elapsed or  
remaining time appears on the footer of the  
Playback Settings Display.  
Battery status  
Elapsed or remaining time  
The corresponding icon for Play, Pause,  
Search, or Slow Play is displayed in the  
upper right corner of the screen.  
2
Press X/x to select the desired  
item and press ENTER.  
z Hints  
• Title  
• You can use direct search without displaying the  
control menu. See page 22 for details.  
• See page 22 for details about searching for a CD.  
• Chapter  
• Audio  
• Subtitle  
• Angle  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Notes  
Checking the playing time and  
remaining time  
• The displayed title/chapter number is the same as  
the number recorded on the disc.  
• Depending on the disc, you may not be able to use  
the time code.  
You can check the playing time and  
remaining time of the current title or chapter.  
1 Select “Time Disp.” on the Playback  
Settings Display, and press ENTER.  
Playing a DVD VIDEO repeatedly  
(Repeat Play)  
You can play all of the titles on a DVD  
VIDEO, or a single title or chapter repeatedly.  
1 Select “Repeat” on the Playback  
Settings Display, and press ENTER.  
Time Disp.  
Title Elapsed  
Title Remain  
Chapter Elapsed  
Chapter Remain  
2 Press X/x to select the setting, and  
Title Elapsed 00:12:48  
press ENTER.  
Chapter: repeats the current  
chapter.  
2 Press X/x to select the time  
information setting, and press ENTER.  
• Title Elapsed  
Title: repeats the current title.  
All: repeats all of the titles.  
• Title Remain  
• Chapter Elapsed  
• Chapter Remain  
To return to normal play  
Select “Off” in step 2.  
z Hint  
z Hint  
See page 24 for details about displaying the elapsed  
When playing a CD repeatedly, use MENU  
time of a CD.  
Note  
Note  
The default setting for “Time Disp.” is “Title  
Elapsed.” After selecting an other option of “Time  
Disp.” and exiting from the Playback Settings  
Display, the “Title Elapsed” appears when the  
Playback Settings Display is re-entered.  
Depending on the disc, the Repeat function may not  
be available.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Locating a point quickly by  
playing a disc in fast forward or  
fast reverse (Scan)  
Searching for a  
Particular Point on a  
Disc (Search, Scan, Slow Play,  
Repeat Play, Random Play)  
Press m or M to fast reverse or fast  
forward during playback. To return to normal  
play, press H.  
Each time you press m or M during scan,  
the scan speed changes.  
You can quickly locate a particular point on a  
disc by monitoring the picture or playing back  
slowly.  
With each press the indication changes as  
shown below.  
DISPLAY  
1
4
7
2
5
8
0
3
6
9
Playback direction  
H t 1M t 2M t 3M  
H
.
m
MENU  
>
Opposite direction  
M
H t 1m t 2m t 3m  
The “3M”/“3m” playback speed is faster  
than “2M”/“2m” and the “2M”/“2m”  
playback speed is faster than “1M”/  
“1m.”  
Notes  
• Depending on the disc, you may not be able to  
perform some of the operations described.  
• For DATA CDs/DATA DVDs, you can search for  
a particular point only on an MP3 audio track.  
z Hint  
C/c on the player works the same as m/M on  
the remote, and ENTER on the player works the  
same as H on the remote. This function is  
effective when you play back a DVD.  
Locating a point quickly using  
the ./> PREV (previous)/  
NEXT buttons (Search)  
Notes  
• No sound is output during Scan play for a DVD.  
• Scan speed differs depending on the disc type.  
During playback, press > or . to go to  
the next or previous chapter/track.  
z Hint  
When you know the chapter or track number, you  
can search directly by entering these numbers using  
the number buttons.  
– While playing a DVD VIDEO, you can search  
for a title or chapter using the number buttons  
and ENTER. Press C/c to switch between title  
and chapter.  
– While playing a CD, you can search for a track  
using the number buttons and ENTER.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Watching frame by frame  
(Slow Play)  
Playing CD repeatedly or in  
random order (Repeat Play,  
Random Play)  
Press m or M when the player is in pause  
mode. To return to normal speed, press H.  
Each time you press m or M during Slow  
Play, the playback speed changes. With each  
press the indication changes as follows:  
You can play all of the tracks on a disc, or a  
single track repeatedly (Repeat Play).  
Also, you can play the tracks in random order,  
too (Random Play).  
Playback direction  
1 Press MENU repeatedly during  
playback to select the playback mode.  
H t 1  
t 2  
t 3  
Track: repeats the current track.  
All: repeats all tracks on the disc.  
Random: plays all tracks on the disc  
randomly.  
Opposite direction  
H t 1  
t 2  
t 3  
To return to normal play  
Select “ Off” in step 1.  
The “3 ”/“3 ” playback speed is slower  
than “2 ”/“2 ” and the “2 ”/“2  
playback speed is slower than “1 ”/“1 .”  
z Hint  
During Random Play, you can start playing other  
randomly selected track by pressing >.  
Note  
Slow speed differs depending on the disc type.  
Notes  
• Depending on the disc, Random Play may not be  
available.  
• The same track may be repeated several times in  
Random Play.  
,continued  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Checking the play information of  
the disc  
Playing MP3 Audio  
Tracks or JPEG Image  
Files  
When playing a DVD  
Press DISPLAY while playing a DVD, and  
then use the Playback Settings Display  
You can play MP3 audio tracks and JPEG  
image files on DATA CDs (CD-ROMs/CD-  
Rs/CD-RWs) or DATA DVDs (DVD-ROMs/  
DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs).  
For playable MP3 audio files and JPEG  
image files, see page 39.  
When playing a CD  
Press DISPLAY.  
The playing track number/the total number of  
tracks and the elapsed time of the current  
track appear. Press DISPLAY repeatedly to  
switch the time information as below.  
• Track Elapsed  
When you insert DATA CDs and DATA  
DVDs, the list of albums appears.  
• Track Remain  
1
4
7
2
5
8
0
3
6
9
• Disc Elapsed  
• Disc Remain  
C/X/x/c  
ENTER  
MENU  
Note  
.
X
>
The player does not display “Disc Elapsed” or  
“Disc Remain” on the screen when playing a CD in  
Random Play.  
H
x
Note  
DATA CDs recorded in KODAK Picture CD  
format automatically start playing when inserted.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Playing an MP3 audio track  
Playing a JPEG image file  
1 Press X/x to select an album on the  
list, and press ENTER.  
1 Press X/x to select an album on the  
list, and press ENTER.  
The list of tracks in the album appears.  
The list of files in the album appears.  
Dir:001  
Dir:001  
MY BEST  
HAWAII  
. .  
. .  
01 Stardust  
02 Fire  
03 Wing  
DSC00001  
DSC00002  
DSC00003  
DSC00004  
DSC00005  
• To go to the next or previous page,  
press > or ..  
• To go to the next or previous page,  
press > or ..  
• To return to the list of albums, press X/  
• To return to the list of albums, press X/  
x to select  
and press ENTER.  
x to select  
and press ENTER.  
2 Press X/x to select the track you want  
2 Press X/x to select the image you  
want to view, and press ENTER.  
The selected image appears.  
Example:  
to play, and press ENTER.  
Playback starts from the selected track.  
To go to the next or previous MP3 audio  
track  
Press > or ..  
To stop playback  
Press x.  
To pause playback  
Press X.  
To restart playback, press X again.  
Notes  
To display the list of thumbnails  
Press MENU when a file is displayed on the  
screen.  
The image files in the album appear in 12  
subscreens with the displayed file in the lead.  
• The total albums and files the player can  
recognize is about 648.  
• The number of albums in a disc the player can  
recognize is about 299.  
1
5
9
2
3
4
6
7
8
10  
11  
12  
• To move to the previous or next page of  
the thumbnail list display, select  
bPrev” or “NextB” under the screen.  
,continued  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• To exit the list of thumbnails, press  
MENU.  
Enjoying JPEG Images as a Slide  
Show  
You can play JPEG image files on a DATA  
CD or DATA DVD successively as a slide  
show.  
To go to the next or previous JPEG image  
file  
Press > or ..  
To rotate a JPEG image  
1
While displaying the file you want  
to start a slideshow, press MENU.  
The list of thumbnails appears.  
Press C/X/x/c while viewing the image.  
X: Reverses the image vertically (up and  
down).  
x: Reverses the image horizontally (left and  
right).  
c: Rotates the image 90 degrees clockwise.  
C: Rotates the image 90 degrees counter  
clockwise.  
Note that the view also returns to normal if  
you press ./> to go to the next or  
previous image.  
1
5
9
2
3
4
6
7
8
10  
11  
12  
Example: when C is pressed once.  
2
Press C/X/x/c to select “Slide  
Show” at the bottom of the screen,  
and press ENTER.  
A slideshow starts from the displayed  
file.  
To pause slideshow  
Press X. By pressing X again or H, you can  
return to slideshow.  
To stop viewing the JPEG image  
Press x.  
The display returns to the list of files.  
To stop slideshow  
Press x or MENU.  
Notes  
• Images may take time to appear due to the number  
of recorded files or the size of the folders. If no  
image appears after a few minutes, some of the  
files included may be too large.  
• Some JPEG files, especially progressive JPEG  
files or JPEG files of 3,000,000 pixels or more,  
may take longer to display than others.  
• The player cannot play the JPEG image file that is  
larger than 3078 (width) x 2048 (height) in  
normal mode, or more than 3,300,000 pixels in  
progressive JPEG. (Some progressive JPEG files  
cannot be displayed even if the size is within this  
specified capacity.)  
• The total albums and files the player can  
recognize is about 648.  
• The number of albums in a disc the player can  
recognize is about 299.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To turn off the Option Menu  
Press OPTIONS or O RETURN.  
Adjusting the Picture  
Size and Quality  
z Hints  
• The screen turns off automatically when the LCD  
panel is closed.  
• You can see the settings for the display in  
“General Setup” (page 29).  
You can adjust the picture displayed on the  
LCD screen. See “General Setup” (page 29),  
when outputting the video signal to TV, etc.  
Note  
Depending on the disc, the screen size you can  
select differs.  
1
4
7
2
5
8
0
3
6
9
C/X/x/c  
ENTER  
OPTIONS  
1
2
Press OPTIONS.  
The Option Menu appears.  
Press X/x to select “LCD Mode”  
and press ENTER.  
The items for “LCD Mode” appear.  
3
Press X/x to select items and  
press ENTER.  
• LCD Aspect: Change the picture size.  
Select “Normal” or “Full” by pressing  
*.  
• Backlight: Adjust the brightness of the  
LCD screen by pressing C c.  
• Contrast: Adjust the difference between  
light and dark areas by pressing C c.  
• Hue: Adjust the red and green color  
balance by pressing C c.  
• Color: Adjust the richness of colors by  
pressing C c.  
X/  
x
/
/
/
/
• Default: Returns all settings to the  
factory defaults.  
* In “Normal,” the pictures are displayed in the  
original configuration, retaining the aspect ratio.  
For example, a 4:3 picture will have black bands  
on both sides, and the letterbox pictures recorded  
either in 16:9 or 4:3 will have black bands on all  
sides. In “Full,” a 16:9 picture will be adjusted to  
fill the entire screen.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3
Press X/x to select the desired  
Setup item from: “General  
Setup,” “Audio Setup,”  
Settings and Adjustments  
“Language Setup,” or “Parental  
Control,” then press ENTER.  
Using the Setup Display  
By using the Setup Display, you can make  
various adjustments to items such as picture  
and sound. You can also set a language for the  
subtitles and the Setup Display, among other  
things.  
The Setup item is selected.  
Example: “General Setup”  
Selected item  
General Setup  
TV Display  
Angle Mark  
Screen Saver  
Default  
16 : 9  
On  
For details on each Setup Display item, see  
pages from 29 to 33.  
On  
Note  
Playback settings stored in the disc take priority  
over the Setup Display settings, and not all of the  
functions described may work.  
ENTER  
RETURN  
Cancel:  
Select:  
Setup items  
4
5
Press X/x to select an item, then  
press ENTER.  
The settings for the selected item appear.  
Example: “TV Display”  
1
4
7
2
5
8
0
3
6
9
C/X/x/c  
ENTER  
O
OPTIONS  
General Setup  
TV Display  
Angle Mark  
Screen Saver  
Default  
4 : 3 Pan Scan  
4 : 3 Letter Box  
16 : 9  
x
1
2
Press OPTIONS when the player is  
in stop mode.  
ENTER  
RETURN  
Cancel:  
Select:  
Settings  
The Option Menu appears.  
The Setup Display does not appear if  
Resume Play is activated. Cancel the  
Resume Play status first by pressing x  
twice, and the press OPTIONS.  
Press X/x to select a setting, then  
press ENTER.  
The setting is selected and setup is  
complete.  
Example: “4:3 Pan Scan”  
Press X/x to select “Setup,” then  
press ENTER.  
Selected setting  
The items for “Setup” appear.  
General Setup  
General Setup  
TV Display  
Angle Mark  
Screen Saver  
Default  
4 : 3 Pan Scan  
TV Display  
Angle Mark  
Screen Saver  
Default  
16 : 9  
On  
On  
On  
On  
ENTER  
RETURN  
Cancel:  
Select:  
ENTER  
RETURN  
Cancel:  
Select:  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To turn off the Setup Display  
Press OPTIONS or O RETURN twice.  
Settings for the Display  
(General Setup)  
Choose playback display options and settings  
according to the TV to be connected.  
Select “General Setup” in the Setup Display.  
To use the display, see “Using the Setup  
The default settings are underlined.  
General Setup  
TV Display  
Angle Mark  
Screen Saver  
Default  
16 : 9  
On  
On  
ENTER  
RETURN  
Cancel:  
Select:  
TV Display (DVD only)  
Selects the aspect ratio of the connected TV  
(4:3 standard or wide).  
4:3  
Pan Scan  
Select this when you connect a  
4:3 screen TV. Automatically  
displays a wide picture on the  
entire screen and cuts off the  
portions that do not fit.  
4:3  
Letter Box  
Select this when you connect a  
4:3 screen TV. Displays a wide  
picture with bands on the upper  
and lower portions of the  
screen.  
16:9  
Select this when you connect a  
wide-screen TV or a TV with a  
wide mode function.  
4:3 Pan Scan  
4:3 Letter Box  
16:9  
,continued  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Note  
Settings for the Sound  
(Audio Setup)  
Depending on the DVD, “4:3 Letter Box” may be  
selected automatically instead of “4:3 Pan Scan” or  
vice versa.  
Angle Mark  
Displays the angle mark when you can change the  
viewing angles during playback of DVDs recorded  
with multi-angles.  
“Audio Setup” allows you to set the sound  
according to the playback and connection  
conditions.  
Select “Audio Setup” in the Setup Display.  
To use the display, see “Using the Setup  
On  
Off  
Display the angle mark.  
Hide the angle mark.  
The default settings are underlined.  
Screen Saver  
Audio Setup  
The screen saver image appears when you  
leave the player in pause or stop mode for 15  
minutes. The screen saver will help prevent  
your display device from becoming damaged  
(ghosting). Press H to turn off the screen  
saver.  
Audio DRC  
TV Mode  
Off  
Digital Output  
ENTER  
RETURN  
Cancel:  
Select:  
On  
Activates the screen saver  
function.  
Audio DRC (Dynamic Range Control)  
(DVD only)  
Makes the sound clear when the volume is  
turned down when playing a DVD that  
conforms to “Audio DRC.”  
This function affects the output from the  
following jacks:  
Off  
Deactivates the screen saver  
function.  
Default  
Each function returns to its original factory  
settings. Note that all of your settings will be  
lost.  
– AUDIO jack  
– OPTICAL OUT jack only when “Dolby  
Digital” is set to “Downmix PCM” (page  
31).  
Standard  
TV Mode  
Normally, select this position.  
Makes low sounds clear even if  
you turn the volume down.  
Wide Range Gives you the feeling of being  
at a live performance.  
Digital Output  
Selects if audio signals are output via the  
OPTICAL OUT jack.  
On  
Normally select this position.  
When you select “On,” see  
for further settings.  
Off  
The influence of the digital circuit  
upon the analog circuit is  
minimal.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Setting the digital output signal  
Setting the Display or  
Sound Track Language  
(Language Setup)  
Switches the method of outputting audio  
signals when you connect an audio equipment  
such as an AV amplifier (receiver) with the  
OPTICAL OUT jack.  
For connection details, see page 35.  
After setting “Digital Output” to “On,” select  
“Dolby Digital” and “DTS.”  
“Language Setup” allows you to set various  
languages for the on-screen display or sound  
track.  
If you connect a component that is  
incompatible with the selected audio signal, a  
loud noise (or no sound) may be heard from  
the speakers, damaging your ears or speakers.  
Select “Language Setup” in the Setup  
Display. To use the display, see “Using the  
Dolby Digital (DVD only)  
Selects the type of Dolby Digital signal.  
Language Setup  
OSD  
English  
English  
English  
English  
Disc Menu  
Subtitle  
Audio  
Downmix  
PCM  
Select this when the player is  
connected to an audio  
component without a built-in  
Dolby Digital decoder.  
ENTER  
RETURN  
Cancel:  
Select:  
Dolby Digital Select this when the player is  
connected to an audio  
component with a built-in  
Dolby Digital decoder.  
OSD (On-Screen Display)  
Switches the display language on the screen.  
Disc Menu (DVD VIDEO only)  
DTS  
Switches the language for the disc’s menu.  
When you select “Original,” the language  
given priority in the disc is selected.  
Selects whether or not to output DTS signals.  
On  
Select this when the player is  
connected to an audio  
component with a built-in DTS  
decoder.  
Subtitle (DVD VIDEO only)  
Switches the subtitle language.  
When you select “Off,” no subtitle is  
displayed.  
Off  
Select this when the player is  
connected to an audio  
component without a built-in  
DTS decoder.  
Audio (DVD VIDEO only)  
Switches the language of the sound track.  
When you select “Original,” the language  
given priority in the disc is selected.  
Note  
If you select a language in “Disc Menu,” “Subtitle,”  
or “Audio” that is not recorded on the DVD  
VIDEO, one of the recorded languages will be  
automatically selected.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Changing the password  
Parental Control  
1 Press X/x to select “Password” in the  
Parental Control setting display, and  
press ENTER.  
Settings (Parental Control)  
Playback of some DVD VIDEOs can be  
limited, by the parental control function.  
2 Select “Change,” and press ENTER.  
The display for entering the password  
appears.  
Select “Parental Control” in the Setup  
Display. To use the display, see “Using the  
3 Enter your current 6-digit password in  
the “Old Password” box.  
Parental Control  
Password  
4 Enter your new 6-digit password in the  
“New Password” box.  
Parental Control  
5 Enter your new 6-digit password once  
again in the “Verify Password” box,  
then press ENTER to confirm.  
ENTER  
RETURN  
Cancel:  
Select:  
Password  
If you make a mistake entering your  
password  
Press CLEAR, or press C to return one by one  
before pressing ENTER in step 5, and then re-  
enter the password.  
Enter or change a password. By setting a  
password, you can limit playback of a DVD  
that has the parental control function. When  
the Password option is first accessed, enter a  
new password (you do not need to enter the  
old password.).  
Setting the parental control  
(limited playback)  
1 PressX/xto select “Parental Control”  
in the Parental Control setting display,  
and press ENTER.  
Parental Control  
The lower the setting value, the stricter the  
limitation.  
To set the parental control, you need the  
selected password in “Password,” therefore  
first set the password in the set up.  
The display for setting the playback  
limitation level appears.  
Parental Control  
Password  
2
3
4
5
6
7
8
Parental Control  
Adult  
ENTER  
RETURN  
Cancel:  
Select:  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
2 Press X/xto select the limitation level  
(1-8), and press ENTER.  
The lower the value, the stricter the  
limitation.  
The display for entering the password  
appears.  
Parental Control  
Password  
OK  
ENTER  
Enter password, then press  
.
3 Enter or re-enter your 6-digit password  
using the number buttons, then press  
ENTER.  
Parental Control setting is complete.  
To play a disc for which Parental Control is  
set  
1
Insert the disc and press H.  
The display for entering your password  
appears.  
2
Enter your 6-digit password using the  
number buttons, then press ENTER.  
The player starts playback.  
If you forget your password  
Remove the disc and repeat the steps outlined in  
“Changing the password” (page 32). Enter  
“136900” in the “Old Password” box, and then enter  
your new 6-digit password in the “New Password”  
box and “Verify Password” box.  
Notes  
• When you play discs which do not have the  
Parental Control function, playback cannot be  
limited on this player.  
• Depending on the disc, you may be asked to  
change the parental control level while playing  
the disc. In this case, enter your password, then  
change the level. If the Resume Play mode is  
cancelled, the level returns to the previous level.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Hookups  
Connecting to another device  
To switch LINE SELECT (IN/OUT) switch  
LINE SELECT IN: Input images or audio from an exterior device. The “Line in” message will  
be displayed on the LCD screen until the signal from the exterior device  
is received.  
LINE SELECT OUT:Sends the playback signal from this player to a TV.  
Notes  
• Plug cords securely to prevent noise.  
• Refer to the instructions supplied with the components to be connected.  
• You cannot connect this player to a TV that does not have a video input jack.  
• Be sure to disconnect the AC power cord of each component before connecting.  
• Connect the player to the TV directly. Image quality may suffer when the video output from the player is  
passed through a video deck on to a TV.  
Connecting to TV monitor  
TV or monitor with audio/  
video intput jacks  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
LINE SELECT IN OUT  
DC IN  
9.5V  
A
B
To AUDIO/VIDEO  
Audio/video cord (supplied)  
To send the playback signal to a TV or a monitor  
1
Set the LINE SELECT switch on the player’s right side to “OUT.”  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Connecting to an AV amplifier (receiver)  
Example 1  
Stereo amplifier  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
LINE SELECT IN OUT  
DC IN  
9.5V  
A
B
To AUDIO  
To AUDIO input  
Audio/video cord (supplied)  
To send analog audio signal to an AV amplifier (receiver)  
Set the LINE SELECT switch on the player’s right side to “OUT.”  
1
* The yellow plug is used for video signals (page 34).  
Example 2  
Amplifier with Dolby Digital  
or DTS decoder  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
LINE SELECT IN OUT  
DC IN  
9.5V  
A
B
To OPTICAL OUT  
To AUDIO input  
Optical digital cord (not supplied)  
To send digital audio signal to an AV amplifier (receiver)  
1
2
Set the LINE SELECT switch on the player’s right side to “OUT.”  
Set “Digital Output” to “On” in “Audio Setup” (page 30).  
,continued  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting to Video Player or Camcorder  
Video player or camcorder  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
LINE SELECT IN OUT  
DC IN  
9.5V  
A
B
To AUDIO/VIDEO output  
To AUDIO/VIDEO  
Audio/video cord (supplied)  
To receive the playback signal from a Video Player or Camcorder  
Set the LINE SELECT switch on the player’s right side to “IN.”  
1
Note  
Set the LINE SELECT switch to “OUT” after use. You cannot play back on the player if the switch is set to  
“IN.”  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The picture does not fill the screen, even  
though the aspect ratio is set in “TV  
Display” under “General Setup.”  
, The aspect ratio of the disc is fixed on your  
DVD.  
Additional Information  
Troubleshooting  
If you experience any of the following  
difficulties while using the player, use this  
troubleshooting guide to help remedy the  
problem before requesting repairs. Should  
any problem persist, consult your nearest  
Sony dealer.  
The black points appear and the red, blue,  
green points remain on the LCD.  
, This is a structural property of the LCD and  
not mulfunction.  
Sound  
There is no sound.  
, The player is in pause mode or in Slow Play  
mode.  
, The player is in fast forward or fast reverse  
mode.  
Power  
The power is not turned on.  
, Check that the AC power cord is connected  
securely.  
, When using with the battery pack, check  
that the battery pack is sufficiently charged.  
, Re-connect the connecting cord securely.  
, The connecting cord is damaged.  
, The player is connected to the wrong input  
jack on the amplifier (receiver) (page 35).  
, The amplifier (receiver) input is not  
correctly set.  
, If the audio signal does not come through  
the OPTICAL OUT jack, check the audio  
Picture  
There is no picture/picture noise appears.  
, The disc is dirty or flawed.  
, The brightness is set at minimum. Set the  
brightness in “LCD Mode” (page 27).  
, When you play discs, set the LINE SELECT  
switch to “OUT.” When you send the  
playback signal to other device, set the  
LINE SELECT switch to “OUT.” When  
you receive the playback signal from other  
device, set the LINE SELECT switch to  
“IN” (page 34).  
The sound volume is low.  
, The sound volume is low on some DVDs.  
The sound volume may improve if you set  
“Audio DRC” in “Audio Setup” to “TV  
, Re-connect the connecting cord securely.  
, The connecting cords are damaged.  
, Check the connection to your TV (page 34)  
and switch the input selector on your TV so  
that the signal from the player appears on  
the TV screen.  
Operation  
The remote does not function.  
, The batteries in the remote are weak.  
, There are obstacles between the remote and  
the player.  
, The distance between the remote and the  
player is too far.  
, The remote is not pointed at the remote  
sensor on the player.  
, Direct sunlight or strong illumination is  
striking the remote sensor.  
, The player is connected to the  
COMPONENT VIDEO IN (Y, PB, PR) jacks  
of high-vision TV.  
, If the picture output from your player goes  
through your video deck to get to your TV  
or if you are connected to a combination  
TV/VIDEO player, the copy-protection  
signal applied to some DVD programmes  
could affect picture quality.  
,continued  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Nothing happens when buttons are  
pressed.  
The subtitle language cannot be changed  
or turned off.  
, Try using the DVD’s menu instead of the  
direct selection button on the remote  
,
The player’s  
\/1  
/HOLD switch is set on  
“HOLD” (page 16).  
, Multilingual subtitles are not recorded on  
the DVD being played.  
, The DVD prohibits the changing of  
subtitles.  
The disc does not play.  
, The disc is turned over.  
Insert the disc with the playback side facing  
down.  
, The disc is not set correctly.  
, The player cannot play certain discs  
(page 7).  
The angles cannot be changed.  
, Try using the DVD’s menu instead of the  
direct selection button on the remote  
, The region code on the DVD does not match  
the player (page 8).  
, Moisture has condensed inside the player  
, The player cannot play a recorded disc that  
is not correctly finalized page 7  
, Multi-angles are not recorded on the DVD  
being played.  
(
).  
, The angle can only be changed when the  
(
).  
” indicator lights up on the screen  
, Parental Control has been set. Change the  
setting.  
, The DVD prohibits changing of the angles.  
, The LINE SELECT switch on the player’s  
right side is set to “IN.”  
The MP3 audio track cannot be played  
, The DATA CD is not recorded in an MP3  
format that conforms to ISO 9660 Level 1 or  
Joliet.  
The player starts playing the disc  
automatically.  
, The disc features an auto playback function.  
, The DATA DVD is not recorded in MP3  
format that conforms to UDF (Universal  
Disk Format).  
, The MP3 audio track does not have the  
extension “.MP3.”  
, The data is not formatted in MP3 even  
though it has the extension “.MP3.”  
, The data is not MPEG-1 Audio Layer III  
data.  
, The player cannot play audio tracks in  
mp3PRO format.  
Playback stops automatically.  
, While playing discs with an auto pause  
signal, the player stops playback at the auto  
pause signal.  
Some functions such as Stop, Search,  
Scan, Slow Play, Repeat Play, or Random  
Play cannot be performed.  
, Depending on the disc, you may not be able  
to do some of the operations above. Refer to  
the operating instructions supplied with the  
disc.  
, The MP3 audio track is damaged.  
The language for the sound track cannot  
be changed.  
, Try using the DVD’s menu instead of the  
direct selection button on the remote  
, Multilingual tracks are not recorded on the  
DVD being played.  
, The DVD prohibits the changing of the  
language for the sound track.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The JPEG image file cannot be played  
, The DATA CD is not recorded in a JPEG  
format that conforms to ISO 9660 Level 1 or  
Joliet.  
About MP3 Audio Tracks  
and JPEG Image Files  
MP3 is audio compression technology that  
satisfies the ISO/IEC MPEG regulations.  
JPEG is image compression technology.  
You can play DATA CDs/DATA DVDs that  
contain MP3 audio tracks or JPEG image  
files.  
, The DATA DVD is not recorded in JPEG  
format that conforms to UDF (Universal  
Disk Format).  
, The JPEG image file does not have the  
extension “.JPG.”  
, The data is not formatted in JPEG even  
though it has the extension “.JPG.”  
, The JPEG image file format does not  
conform to DCF (page 39).  
, The image is larger than 3078 (width) ×  
2048 (height) in normal mode, or more than  
3,300,000 pixels in progressive JPEG.  
(Some progressive JPEG files cannot be  
displayed even if the file size is within this  
specified capacity.)  
DATA CDs/DATA DVDs that the  
player can play  
You can play back DATA CDs (CD-ROMs/  
CD-Rs/CD-RWs) or DATA DVDs (DVD-  
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/  
DVD-Rs) recorded in MP3 (MPEG-1 Audio  
Layer III) and JPEG format.  
, The JPEG image file is damaged.  
However, this player only plays DATA CDs  
whose logical format is ISO 9660 Level 1 or  
Joliet, and DATA DVDs of Universal Disk  
Format (UDF).  
Refer to the instructions supplied with the  
disc drives and the recording software (not  
supplied) for details on the recording format.  
The album/track/file names are not  
displayed correctly.  
, The player can only display numbers and  
alphabet. Other characters are displayed as  
“ .”  
*
The disc does not start playing from the  
beginning.  
Note  
The player may not be able to play some DATA  
CDs/DATA DVDs created in the Packet Write  
format or multiple sessions.  
, Repeat Play or Random Play is selected  
(pages 21 and 23).  
, Resume play has taken effect (page 17).  
MP3 audio track or JPEG image  
file that the player can play  
The player can play the following tracks and  
files:  
• MP3 audio tracks with the extension  
“.MP3.”  
The player does not operate properly.  
, When static electricity, etc., causes the  
player to operate abnormally, unplug the  
player.  
• JPEG image files with the extension  
“.JPG.”  
• JPEG image files that conform to the DCF*  
image file format.  
* “Design rule for Camera File system”: Image  
standards for digital cameras regulated by JEITA  
(Japan Electronics and Information Technology  
Industries Association).  
,continued  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Notes  
Notes About the Discs  
• Change the extension to “.JPG,” for files with  
“.JPE” or “.JPEG” extension.  
• The player will play any data with the extension  
“.MP3” or “.JPG,” even if they are not in MP3 or  
JPEG format. Playing this data may generate a  
loud noise which could damage your speaker  
system.  
• To keep the disc clean, handle the disc by its  
edge. Do not touch the surface.  
• The player does not conform to audio tracks in  
mp3PRO format.  
• Some JPEG files cannot be played.  
• The player can display a file or track name up to  
14 characters. Any characters after the 14th  
character do not appear on the screen.  
• Characters that are not displayable appear as “ .”  
*
• Depending on the disc, a file or track name that is  
not displayable appears as “ .”  
*
• You cannot display correctly the CD-R/CD-RW  
file names written in the UDF file system.  
• When playing an MP3 audio track recorded in  
VBR mode, you cannot display the bit rate  
correctly.  
• Do not expose the disc to direct sunlight or  
heat sources such as hot air ducts, or leave it  
in a car parked in direct sunlight as the  
temperature may rise considerably inside  
the car.  
About playback order of albums,  
tracks, and files  
Tracks and files within an album play in the  
order of the recorded media (CD-R etc.).  
• After playing, store the disc in its case.  
• Clean the disc with a cleaning cloth. Wipe  
the disc from the centre out.  
z Hint  
Since a disc with many trees takes longer to start  
playback, it is recommended that you create albums  
with no more than two trees.  
• Do not use solvents such as benzine,  
thinner, disc/lens cleaners, or anti-static  
spray intended for vinyl LPs.  
• If you have printed the disc’s label, dry the  
label before playing.  
Notes  
• The player can recognize up to 299 albums  
(including albums that do not contain MP3 audio  
tracks and JPEG image files). The player will not  
play any albums beyond the 299th album.  
• The player can recognize a combined total of up  
to 648 files, tracks, and albums. The player will  
not play beyond the 648th file, track or album.  
• Depending on the writing condition of the disc,  
the total number of files, tracks, and albums  
recognizable may be fewer than 648.  
• The Album List displays only the currently  
playing album name. Any album located on the  
upper layer is displayed as “\..\.”  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Specifications  
System  
Laser: Semiconductor laser  
Signal format system: NTSC  
Liquid Crystal Display  
Panel size: 8 inches wide (diagonal)  
Driving system: TFT active matrix  
Resolution: 800 × 480 (effective pixel rate:  
more than 99.99%)  
Audio characteristics  
Frequency response: DVD VIDEO (PCM  
48 kHz): 20 Hz to 22 kHz/  
CD: 20 Hz to 20 kHz  
Harmonic distortion: 0.01 %  
Dynamic range: DVD VIDEO: 90 dB/  
CD: 90 dB  
General  
Power requirements:  
DC 9.5 V (AC Adaptor/Car battery  
adaptor)  
DC 7.4 V (Battery pack)  
Power consumption (DVD VIDEO  
Playback):  
Wow and flutter: Less than detected value  
( 0.001% W PEAK)  
23 W (when used with a battery pack)  
8.5 W (when used without a battery pack,  
with a headphone)  
Inputs/Outputs  
VIDEO (video input/output):  
Minijack (1)  
Output 1.0 Vp-p/75 ohms  
AUDIO (audio input/output)/OPTICAL  
OUT (optical output):  
Stereo minijack/optical minijack  
combined (1)  
Dimensions (approx.):  
7
3
225.4 × 33.5 × 164.9 mm (8 /8 × 1 /8 ×  
1
6 /2 inches) (width/height/depth) incl.  
projecting parts  
Mass (approx.): 920 g (2.03 lbs)  
Operating temperature: 5 °C to 35 °C  
(41°F to 95°F)  
Operating humidity: 25 % to 80 %  
AC Adaptor: 100-240 V AC, 50/60 Hz  
Car Battery Adaptor: 12 V DC  
Output 2.0 Vrms/47 kilohms  
Recommended load impedance over  
47 kilohms  
PHONES (headphones) A/B:  
Stereo minijack (2)  
Supplied accessories  
Specifications and design are subject to  
change without notice.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index to Parts and Controls  
For more information, see the pages indicated in parentheses.  
Upper view  
t
VOL  
DISPLAY  
MENU  
RETURN  
OPTIONS  
OPEN  
PUSH OSE  
A VOL (sound volume) –/+ button*  
I MENU button (17)  
B ./> (previous/next) buttons (16)  
C x (stop) button (16)  
D X (pause) button (16)  
E H (play) button (15)*  
F Speaker (16)  
J RETURN button (20)  
K
(remote sensor) (9)  
L OPTIONS button (27)  
M C/X/x/c buttons, ENTER button (17)  
N Disc lid (15)  
G LCD panel (10)  
O PUSH CLOSE (15)  
H DISPLAY button (20)  
P OPEN button (15)  
* Use the tactile dot as a reference when operating  
the player. The H (play) and VOL + buttons  
have a tactile dot.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Front view  
POWER CHARGE  
A POWER indicator (15)  
C
(remote sensor) (9)  
B CHARGE indicator (13)  
Right view  
HOLD  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
LINE SELECT IN OUT  
DC IN  
9.5V  
A
B
A \/1 (on/standby)/HOLD switch (15)  
D VIDEO (input/output) jack (34)  
B PHONES (headphone) jack A, B  
E LINE SELECT (IN/OUT) switch (15)  
C AUDIO (input/output) jack/OPTICAL  
F DC IN 9.5V (AC adaptor input) jack  
OUT (optical output) jack (34, 35)  
(11)  
,continued  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote  
A DISPLAY button (20)  
B Number buttons (17)*  
C TOP MENU button (17)  
D C/X/x/c buttons, ENTER button (17)  
E O RETURN button (20)  
1
4
7
2
5
8
0
3
6
9
F ./> PREV (previous)/NEXT  
buttons (16)  
G m/M (scan/slow) buttons (22)  
H
ADVANCE button (16)  
I X PAUSE button (16)  
J \/1 (on/standby) button (15)  
K VOL (sound volume) +/– buttons  
L CLEAR button (32)  
M AUDIO button (18)*  
N MENU button (17)  
O SUBTITLE button (19)  
P ANGLE button (19)  
Q OPTIONS button (27)  
R H PLAY button (15)*  
S x STOP button (16)  
* Use the tactile dot as a reference when operating  
the player. The number 5 button has a tactile dot.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
Numerics  
16:9 29  
4:3 Letter Box 29  
4:3 Pan Scan 29  
O
OPTICAL OUT 30  
OSD (On-Screen Display) 31  
R
A
Random Play 23  
Remote 9, 44  
Repeat Play 21, 23  
Resume Play 17  
Album 40  
Angle 19  
Audio 18, 31  
Audio DRC 30  
Audio Setup 30  
S
Scan 22  
B
Screen Saver 30  
Search 22  
Batteries  
Setup 28  
C
Slide Show 26  
Slow Play 23  
Subtitle 19, 31  
CD 7, 15  
Connecting 34  
D
T
DATA CD 7, 39  
DATA DVD 7, 39  
Digital output 30  
Disc Menu  
Top Menu 17  
Troubleshooting 37  
TV Display 29  
Display 20,3128  
Dolby Digital 18, 31  
DTS 18, 31  
U
Usable discs  
DVD 7, 15  
DVD+RW  
DVD’s menu 17  
DVD-RW  
F
Fast forward 22  
Fast reverse 22  
G
General Setup 29  
H
Handling discs 40  
J
JPEG 6, 39  
L
Language Setup 31  
M
MP3 6, 39  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preparativos  
Control de accesorios  
Compruebe que dispone de los siguientes elementos:  
• Cable de audio/video (clavija mini × 2 y  
clavija fono × 3) (1)  
• Adaptador para batería de automóvil (1)  
• Batería (NP-FX110) (1)  
• Cable de alimentación de CA (1)  
• Adaptador de CA (1)  
• Control remoto (con batería) (1)  
Uso del control remoto  
Cuanto utilice el control remoto, oriéntelo hacia el sensor remoto  
del reproductor.  
ES  
Para reemplazar la batería del control remoto  
Inserte una batería de litio CR2025 haciendo coincidir sus extremos 3 y #.  
1
Retire el compartimiento de la batería  
(2) mientras presiona la palanca de  
bloqueo (1).  
3
Introduzca la batería nueva en el  
compartimiento de batería con el lado 3  
hacia arriba y luego presione totalmente  
el compartimiento.  
2
Retire la batería usada.  
Notas  
• No exponga el sensor remoto  
a la luz directa del sol o de aparatos de iluminación. Hacerlo podría  
ocasionar un mal funcionamiento.  
• Cuando la batería se agota no es posible realizar operaciones con los botones. Si el control remoto no  
funciona, cambie la batería y controle el estado.  
ADVERTENCIA  
La batería puede explotar si no se maneja correctamente.  
No la recargue, ni la desarme, ni la arroje al fuego.  
PRECAUCIÓN  
Hay peligro de explosión si la batería no se reemplaza correctamente.  
Reemplácela solamente con el mismo tipo de batería o uno equivalente.  
ES  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Uso del Panel LCD  
El panel LCD del reproductor puede rotar un máximo de 180 grados en sentido horario y  
continuar utilizándose. Luego de rotar el panel LCD, este puede plegarse sobre la carcasa del  
reproductor y continuar funcionando.  
Rotación del panel LCD  
1 Coloque el reproductor sobre una mesa u otra superficie plana y estable.  
2 Empuje el panel LCD hacia arriba con los pulgares hasta que esté abierto en posición  
vertical.  
3 Rote lentamente el panel LCD 180 grados en la dirección que indica la flecha  
(sentido horario).  
Rotación y plegado del panel LCD  
Luego de rotar el panel LCD 180 grados en sentido horario, empuje el panel LCD hacia abajo  
sobre la carcasa del reproductor. En esta posición, el panel queda mirando hacia arriba.  
Para volver a colocar el panel LCD en su posición original  
Abra el panel LCD en la posición vertical y rótelo lentamente en sentido antihorario.  
Notas  
• No rote el panel LCD más de 180 grados. Además, no lo rote en la dirección contraria. Si lo hace, el panel  
LCD se romperá.  
• Si el panel LCD no se abre totalmente, no lo rote más. El panel LCD podría romperse.  
• Luego de utilizar el panel LCD, colóquelo nuevamente en la posición original. La pantalla LCD puede  
dañarse por sacudidas violentas o un tratamiento similar.  
ES  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Conexión del Adaptador de CA  
Conecte el adaptador de CA (suministrado) en el orden de 1 a 3 como se muestra debajo.  
Para desconectarlo, siga los pasos en el orden inverso.  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
LINE SELECT IN OUT  
DC IN  
9.5V  
A
B
A conector de DC IN 9.5 V  
Conector de  
CD  
2
Adaptador de CA  
(suministrado)  
Cable de alimentación de  
CA (suministrado)  
1
3
A un tomacorriente  
de pared  
Nota  
Detenga la reproducción antes de desconectar el cable de alimentación de CA. No hacerlo podría ocasionar  
un mal funcionamiento.  
ES  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Uso de la Batería  
Cuando no hay disponible una conexión a la corriente CA, el reproductor puede disfrutarse  
instalando la batería (suministrada).  
Por favor cargue la batería antes de utilizarla.  
Instalación de la batería  
1 Alineando la batería con las líneas de la base del reproductor, ajuste los ganchos de  
la batería en los huecos de la base del reproductor.  
2 Deslice la batería en la dirección que indica la flecha hasta que se ajuste con un clic.  
Batería  
Base del reproductor  
Para retirar la batería  
Empuje la lengüeta de liberación y deslice la batería en la dirección que indica la flecha.  
Lengüeta de liberación  
Notas  
• Apague el reproductor antes de instalar la batería.  
• No retire la batería durante la reproducción.  
• No toque los puntos de conexión del reproductor y la batería. Hacerlo podría ocasionar un mal  
funcionamiento.  
• Tenga cuidado de no dejar caer la batería cuando la instale o retire.  
ES  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Carga de la batería  
1 Sujete la batería al reproductor (página 6) .  
2 Conecte el adaptador de CA al reproductor y luego conecte el cable de alimentación  
de CA a un tomacorriente de pared (página 5) .  
Indicador de carga CHARGE  
Clavija de DC IN 9.5 V  
HOLD  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
DC IN  
9.5V  
LINE SELECT IN OUT  
A
B
POWER CHARGE  
Reproductor  
Batería  
Cuando comienza el proceso de carga, el indicador CHARGE se enciende.  
Cuando termina el proceso de carga, el indicador CHARGE se apaga.  
3 Cuando finalice el proceso de carga, desconecte el cable de alimentación de CA del  
tomacorriente de pared y retire el adaptador de CA.  
Para controlar el nivel de batería  
Cuando el reproductor está detenido, un indicador de batería aparece en la pantalla. Recargue la  
batería cuando aparezca  
o el indicador CHARGE destelle.  
Completo  
Agotado  
El indicador de batería no se muestra mientras se reproduce un DVD o archivo JPEG. Detenga  
el reproductor y compruebe el nivel de batería.  
Tiempo de carga y tiempo máximo de reproducción  
Tiempo de carga  
(con el reproductor apagado)  
Tiempo de reproducción  
(con la visualización encendida)  
Aproximadamente  
6 horas  
Aproximadamente  
6 horas*  
* Esta es la indicación de la reproducción continua más prolongada en las siguientes condiciones.  
– temperatura normal (20ºC (68ºF))  
– Uso de auriculares  
– Configure el ajuste de luz de fondo al mínimo  
– Configure el ajuste de “Salida Digital” en “No” en “Ajuste Audio”.  
La condición de la batería puede reducir el tiempo de operación.  
Notas  
• El indicador de batería no aparece en la pantalla cuando el adaptador de CA se está utilizando o cuando  
recibe alimentación de fuentes externas.  
• Los tiempos de carga pueden diferir de los que se indican más arriba debido a las condiciones de uso, el  
entorno y otros factores. La temperatura ambiente recomendada para la carga oscila entre los 10-30ºC (50-  
86ºF).  
ES  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Uso con el adaptador para batería de automóvil  
Utilice el adaptador para batería de automóvil (suministrado) para alimentar el reproductor  
desde el enchufe del encendedor de cigarrillos. El adaptador es para una batería de automóvil de  
12V. No lo utilice con una batería de automóvil de 24V. El adaptador también puede utilizarse  
en automóviles con sistema eléctrico de tierra negativa. No lo utilice en automóviles con sistema  
eléctrico de tierra positiva.  
PHONES  
AUDIO  
OPTICAL  
OUT  
VIDEO  
LINE SELECT IN OUT  
DC IN  
9.5V  
A
B
Al enchufe del  
encendedor de cigarrillos  
A clavija de DC  
IN 9.5 V  
Adaptador para batería de  
automóvil (suministrado)  
z Sugerencia  
Si el adaptador interfiere con la operación del automóvil, utilice un cable de extensión comercial para  
encendedor de cigarrillos.  
Notas  
• No utilice el adaptador para automóviles si ha sido golpeado o dañado.  
• Arregle el cable de manera que no moleste al conductor. Además, no coloque el panel LCD donde el  
conductor pueda verlo.  
• Si la imagen no es nítida, mantenga el reproductor alejado del adaptador para batería de automóvil.  
• Utilice el adaptador para batería de automóvil con el motor en marcha. Si se utiliza con el motor apagado,  
la batería del automóvil puede quedar inutilizable.  
• Si el enchufe del encendedor de cigarrillos está sucio de ceniza, etc., una mala conexión puede ocasionar  
que el enchufe se caliente. Siempre límpielo bien antes de usarlo.  
• El adaptador para batería de automóvil puede calentarse mientras se carga o luego de utilizarlo durante un  
período prolongado. Eso no es una falla de funcionamiento.  
Luego de utilizar el adaptador para batería de automóvil  
Luego de apagar el reproductor, desconecte el adaptador para batería de automóvil del enchufe  
del encendedor de cigarrillos.  
Notas  
• No apague el motor del automóvil mientras el reproductor esté encendido. Eso detendrá la alimentación de  
corriente y podría dañar el reproductor.  
• Desconecte el adaptador para batería de automóvil luego de utilizarlo. Debido a que en algunos automóviles  
la corriente llega al enchufe del encendedor de cigarrillos aunque el motor esté apagado, la batería puede  
descargarse con el tiempo.  
• Al desconectar un adaptador para batería de automóviles, sostenga el enchufe para retirarlo.  
• Al escuchar la radio del automóvil, desconecte el adaptador para batería del encendedor de cigarrillos para  
evitar el ruido.  
ES  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Presione [/1 en el control remoto  
o deslice el interruptor [/1/HOLD  
del reproductor a “[/1”.  
Reproducción de discos  
El reproductor se enciende y el indicador  
de energía se muestra verde.  
Reproducción de discos  
3
4
Presione OPEN para abrir la tapa  
del disco.  
Dependiendo del DVD, algunas operaciones  
pueden ser diferentes o estar restringidas.  
Consulte las instrucciones de operación  
proporcionadas con el disco.  
Conecte el adaptador de CA o instale la  
batería.  
Inserte el disco a reproducir.  
Empuje la cara de reproducción hacia  
abajo hasta que se ajuste con un clic.  
x
H
VOL  
DISPLAY  
MENU  
RETURN  
OPTIONS  
POWER CHARGE  
La cara de reproducción debe  
mirar hacia abajo  
OPEN  
PO  
WER  
CHARGE  
D
L
O
H
5
6
Empuje el PUSH CLOSE del  
reproductor para cerrar la tapa del  
disco.  
OPEN \/1/HOLD  
Presione H.  
Comienza la reproducción.  
• Algunos discos pueden comenzar a  
reproducirse automáticamente luego de  
cerrar la tapa del disco.  
\/1  
1
4
7
2
5
8
0
3
6
9
• Dependiendo del disco, puede aparecer  
un menú en la pantalla. Vea página 11  
para obtener más información.  
• Luego de reproducir todos los títulos, el  
reproductor se detendrá y volverá a  
mostrarse la pantalla de menú.  
H
x
1
Abra el panel LCD del reproductor.  
Ajuste el interruptor LINE SELECT  
sobre el lado derecho del reproductor en  
“OUT”.  
Notas  
• Si el disco se inserta con la cara de reproducción  
hacia arriba, aparecerá un mensaje que dice “No  
hay disco” o “Imposible reproducir este disco.”  
ES  
,continúa  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
• Los discos creados en grabadoras de DVD deben  
finalizarse correctamente para reproducirlos en  
este reproductor. Para más información sobre la  
finalización, consulte las instrucciones de  
operación suministradas con la grabadora de  
DVD.  
Operaciones adicionales de  
reproducción  
• El disco todavía puede estar girando al abrir la  
tapa del disco. Espere hasta que el disco se  
detenga antes de retirarlo.  
• Durante la operación podrá aparecer “ ” en la  
pantalla. Este símbolo indica que una función  
explicada en estas instrucciones de operación no  
está disponible en el DVD VIDEO actual.  
1
4
7
2
5
8
0
3
6
9
.
X
>
x
Para detener la reproducción  
Presione x.  
Si presiona H nuevamente, la reproducción  
se reanudará desde donde la detuvo  
(Reanudar reproducción). Vea página 11  
para obtener más información.  
Para  
Operación  
Presione x  
Presione X  
Presione >  
Detener  
Pausa  
Para reproducir desde el principio, presione  
x dos veces y luego presione H.  
Vaya al siguiente  
capítulo, pista o  
escena en modo de  
Para apagar el reproductor  
Presionel el botón \/1 del control remoto o  
deslice el interruptor \/1/HOLD del  
reproductor a “\/1”.  
reproducción continua  
Vuelva al capítulo,  
pista o escena anterior  
en modo de  
Presione .  
Para evitar la operación accidental de un  
botón del reproductor  
Ajuste el interruptor \/1/HOLD del  
reproductor en “HOLD”. Todos los botones  
del reproductor están bloqueados mientras  
que el botón del control remoto continúa en  
funcionamiento.  
reproducción continua  
Adelante brevemente Presione  
la escena actual*  
durante  
la reproducción.  
* DVD VIDEOs solamente.  
Las funciones mencionadas no podrán utilizarse  
para algunas escenas.  
Notas  
• Un protector de pantalla aparece cuando usted  
deja el reproductor en pausa o detenido sin  
operación por más de 15 minutos. La imagen  
desaparece cuando usted presiona H.  
• El reproductor se apaga 15 minutos después de  
comenzar la función de protector de pantalla  
(Apagado automático).  
ES  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reanudar la reproducción desde  
donde usted detuvo el disco  
(Reanudar reproducción)  
Uso del menú de DVD  
Un DVD está dividido en secciones largas de  
una película o presentación musical llamadas  
“títulos”. Cuando usted reproduce un DVD  
que contiene varios títulos, puede seleccionar  
el título que desee con el botón TOP MENU.  
Cuando usted reproduce DVDs que le  
permiten seleccionar elementos tales como el  
idioma del sonido y los subtítulos, seleccione  
esos elementos con el botón MENU.  
Cuando usted detiene la reproducción, el  
reproductor recuerda el punto donde se  
detuvo y muestra un mensaje en la pantalla.  
Usted puede reanudar la reproducción desde  
el mismo lugar presionando H nuevamente.  
La función Reanudar reproducción funciona  
aún después de apagar el reproductor,  
siempre y cuando la tapa del disco se  
mantenga cerrada.  
1
4
7
2
5
8
0
3
6
9
Botones  
de números  
MENU  
TOP MENU  
1
4
7
2
5
8
0
3
6
9
C/X/x/c  
ENTER  
H
x
1 Presione TOP MENU o MENU.  
El menú del disco aparece en la pantalla.  
Los contenidos del menú varían de un  
disco a otro.  
1 Al reproducir un disco, presione x  
para detener la reproducción.  
Aparece un mensaje.  
2 Presione C/X/x/c o los botones de  
números para seleccionar el elemento  
que desea reproducir o cambiar.  
2 Presione H.  
3 Presione ENTER.  
El reproductor comienza a reproducir  
desde donde usted lo detivo en el paso 1.  
Nota  
z Sugerencias  
Dependiendo del disco, usted no podrá utilizar C/c  
del reproductor para el menú de disco. En ese caso,  
utilice C/c del control remoto.  
• Para reproducir desde el principio del disco,  
presione x dos veces y luego presione H.  
• Al encender nuevamente el reproductor después  
de apagarlo, la reproducción se reanuda  
automáticamente.  
Notas  
• Dependiendo del lugar donde se detuvo, la  
reproducción puede no comenzar desde  
exactamente el mismo punto.  
• El punto donde usted detuvo la reproducción se  
borra cuando:  
– usted abre la tapa del disco.  
– usted desconecta la batería y el adaptador de  
CA.  
– usted cambia el ajuste del interruptor LINE  
SELECT.  
ES  
,continúa  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Notas  
Cambio del sonido  
• Dependiendo del disco, usted no podrá cambiar el  
formato de audio aunque esté grabado en  
múltiples formatos de audio.  
• Al reproducir pistas de audio DTS en un CD,  
usted no podrá cambiar el sonido.  
Al reproducir un DVD VIDEO grabado en  
múltiples formatos de audio (PCM, Dolby  
Digital o DTS), usted puede cambiar el  
formato de audio. Si el DVD VIDEO está  
grabado con pistas multilingües, usted  
también puede cambiar el idioma.  
Con CDs, usted puede seleccionar el sonido  
del canal derecho o del izquierdo y escuchar  
el sonido del canal seleccionado a través de  
los parlantes derecho e izquierdo. Por  
ejemplo, al reproducir un disco conteniendo  
una canción con las voces en el canal derecho  
y los instrumentos en el canal izquierdo, usted  
puede escuchar los instrumentos a través de  
ambos parlantes seleccionando el canal  
izquierdo.  
1
4
7
2
5
8
0
3
6
9
AUDIO  
1 Presione AUDIO varias veces para  
seleccionar la señal de audio  
deseada.  
El ajuste por defecto está subrayado.  
Al reproducir un DVD VIDEO  
Dependiendo del DVD VIDEO la opción  
de idioma varía.  
Cuando el mismo idioma se muestra dos  
o más veces, el DVD VIDEO se graba en  
múltiples formatos de audio.  
Al reproducir un CD  
• Estéreo: el sonido estéreo estándar  
• Izqdo.: el sonido del canal izquierdo  
(monoaural)  
• Dcho.: el sonido del canal derecho  
(monoaural)  
z Sugerencia  
Usted puede comprobar el formato de audio actual  
(Dolby Digital, DTS, PCM, etc.) presionando  
AUDIO varias veces al reproducir un DVD  
VIDEO.  
ES  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Presentación de subtítulos  
Cambio de ángulos  
Si varios ángulos (multiángulos) de una  
escena están grabados en el DVD VIDEO,  
Si los subtítulos están grabados en el disco,  
usted podrá cambiar los subtítulos o  
activarlos o desactivarlos cuando lo desee al  
reproducir un DVD.  
” aparece en la pantalla. Esto significa  
que usted puede cambiar el ángulo de  
visualización.  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
SUBTITLE  
ANGLE  
1 Presione ANGLE varias veces para  
seleccionar un número de ángulo.  
La escena cambia al ángulo seleccionado.  
1 Presione SUBTITLE varias veces para  
seleccionar un ajuste.  
Dependiendo del disco, la opción de  
idioma varía.  
Notas  
Para desactivar los subtítulos  
• Algunos DVD VIDEOs no permiten cambiar de  
ángulo aunque haya multiángulos grabados.  
• Usted no puede cambiar de ángulo durante  
Reproducción Lenta o Reproducción Rápida.  
Seleccione “Subtitulo Desact.” en el paso 1.  
Notas  
• Dependiendo del DVD VIDEO, usted no podrá  
cambiar los subtítulos aunque haya subtítulos  
multilingües grabados en el mismo. Además,  
usted no podrá desactivarlos.  
• Al reproducir un disco con subtítulos, el subtítulo  
puede desaparecer cuando usted presione  
.
ES  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-294-108-11(1)  
Sony Corporation Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Microphone MMD 935 User Manual
Shark Vacuum Cleaner NV360 User Manual
Shure Microphone BETA 52 User Manual
Silex technology Network Card SX 10WAN User Manual
Sony Car Stereo System SRF 18 User Manual
Sony DVD Recorder VRD VC30 User Manual
Sony Stereo System 4 130 433 132 User Manual
Sony Webcam VPCF11 User Manual
Spalding Fitness Equipment M8811241 User Manual
TANDBERG Network Card Gatekeeper User Manual