4-100-628-11 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
KV-XR34
KV-XR29
KV-XR25
M83
M80
M53
M50
© 2003 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
To prevent fire or shock hazard, do not expose the
TV to rain or moisture.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
x Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
20 mm
3.8 mm
screws
clamps
band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
or
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Menu Adjustment
Installation
Getting Started ..................................... 6
Setting up your TV
(“Initial Setup”) .................................... 7
Introducing the menu system .......... 12
Changing the “Picture” setting ........ 15
Changing the “Sound” setting ......... 16
Changing the “Timer” setting .......... 18
Overview of Controls
Changing the “Channel Setup”
setting .................................................. 19
TV front and rear panels ..................... 8
Using the remote control and
basic functions ...................................... 9
Changing the “Setup” setting .......... 21
GB
Additional Information
Advanced Operations
Connecting the 3D WOOFER
(KV-XR29M83/XR29M53 only) ....... 22
Selecting the picture and
sound modes ...................................... 11
Connecting optional components ... 22
Troubleshooting ................................. 24
Specifications ...................... Back cover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
x Getting Started
Step 1
Insert the batteries (supplied) into the remote.
Note
•
Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
•
You can also connect your TV to other optional components
(see page 22).
Step 3
Plug in the power cord, then press ! on the TV to
turn it on.
Note
•
The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Step 4
Set up the TV by following the instructions of the
“Initial Setup” menu (see page 7).
6
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
x
Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup” menu will appear.
You may change the menu language, preset the TV channels automatically and adjust
the picture position using the buttons on the TV front panel.
Tip
• The MENU,
and V/v/B/b buttons on the remote control can also be used for the
operations below.
Press 2 +/– to select the desired menu
language, then press t.
1
The selected menu language appears.
Press 2 +/– to select “Yes”, then press t
to preset the channels automatically or
select “No” to skip automatic channel
presetting.
2
Once you select “Yes”, your TV will start
searching for all the available channels.
If the message “No channel found. Please
connect cable/antenna.” appears, check your
TV connections, then press t.
Press 2 +/– to adjust the bars on the
top and bottom of the menu if they are
slanted, then press t.
3
4
If no adjustment is necessary, then press
t.
Press 2 +/– to select “No”, then press t.
This menu will not appear again the next
time you turn on the TV by pressing !.
To allow this menu to appear again, select
“Yes”, then press t.
Tips
• You can immediately go to the end of the “Initial Setup” menu by pressing MENU.
• You can also set up your TV using the menu system (see page 12).
• You can also preset the channels automatically by pressing MENU (AUTO PROG) button on
the TV front panel for about five seconds.
Installation
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of Controls
x TV front and rear panels
TV rear panel
qa
qg
C
B
CR
R
L
1
Y
2
L(MONO)
ENTER
SEECT
3
MENU
A
UTO
PROGR
PROGR
qs
qf qd
TV front panel
0
9
8 7 6
4
3
2
5
1
L(MONO)
R
AUTO PROG:Press [MENU] for 5sec
SOUND MENU
MODE (AUTO PROG)
PROG
3
Button/Terminal
1
Function
Page
Remote control sensor.
Standby indicator.
–
6
2 1
2
Wake Up indicator.
18
6
3 !
Turn off or turn on the TV.
Select program number.
Adjust volume.
4 PROG +/–
5 2 +/–
6 t
–
–
Select TV or video input.
22
Menu operations
5 2 +/–
Select and adjust items.
Confirm selected items.
–
–
6 t
7 MENU
Display or cancel the menu.
Preset channels automatically.
Select sound mode options.
–
7 (AUTO PROG)
8 SOUND MODE
7
11
5-Band Graphic Equalizer display will appear.
9 t3
0 i
Video input terminal 3.
22
–
Headphone jack.
qa
Component video input terminal.
Antenna input terminal.
23
22
23
22
22
qs 8
qd T
qf t1, t2
Monitor output terminal.
Video input terminal 1, 2.
Enjoy high quality sound.
qg WOOFER
(KV-XR29M83/
XR29M53 only)
8
Overview of Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
x Using the remote control and basic
functions
9
0
qa
qs
1
2
A/B
1
4
7
3
6
9
2
5
8
0
qd
3
PROG
qf
qg
qh
qj
4
5
MENU
6
7
RESET
qk
ql
w;
8
TV
Button
Description
Page
1
2
3
4
5
8
?/1
Turn off temporarily or turn on the TV.
Display the TV program.
–
–
–
a
Jump to previous program number.
Select program number.
PROG +/–
–
–
–
2 +/–
Adjust volume.
Change the picture size:
“On” (16:9 wide-mode), “Off”.
9
q;
qs
Mute the sound.
–
–
Display on-screen information.
Select TV or video input.
Input numbers.
t
22
–
qd 0 – 9, -
qh
Select surround mode options:
“On” (surround), “Simulated” (stereo-like
monaural sound), “Off”.
–
qk RESET
Set TV to factory setting.
24
continue
Overview of Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
9
continued
Button
ql
Description
Page
Select sound mode options.
11
5-Band Graphic Equalizer display will appear.
w;
Select picture mode options.
11
Menu operations
6 MENU
7
Display or cancel the menu.
Confirm selected items.
Select and adjust items.
14
14
14
qj V, v, B, b
Timer operations
qf
Set TV to turn on automatically.
Set TV to turn off automatically.
–
–
qg
Stereo/bilingual operations
qa A/B
Not function for your TV
–
10 Overview of Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Operations
x Selecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your
preference in the “Personal” option.
Selecting the picture mode
Press
to select the desired picture mode.
A/B
Select
To view
1
4
7
2
5
8
0
3
6
9
“Dynamic”
“Standard”
“Soft”
high contrast pictures.
normal pictures.
mild pictures.
PROG
“Personal”
the last adjusted picture setting
from the “Picture Adjustment”
option in the menu (see page 15).
MENU
RESET
TV
Selecting the sound mode
Press (or SOUND MODE on the front panel) to select the desired sound mode.
5-Band Graphic Equalizer display will appear.
Select
To listen to
“Dynamic”
dynamic and clear sound that emphasizes both the low
and high tones.
Dynamic
100 300 1k 3k 8k
“Drama”
“Soft”
sound that emphasizes voice and high tones.
soft, natural and relaxing sounds.
Drama
100 300 1k 3k 8k
Soft
100 300 1k 3k 8k
“Personal”
the last adjusted sound setting from the
“Sound Adjustment” option in the menu (see page 17).
Personal
100 300 1k 3k 8k
Advanced Operations
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Adjustment
x Introducing the menu system
The MENU button lets you open a menu and change the settings of your TV.
The following is an overview of the menu system.
Return icon
Name of the current
menu
Picture icon
Sound icon
Timer icon
Setup
Language:
English
Picture Rotation
Wide Mode:
Video Label
Menu level 3
Channel Setup icon
Setup icon
Color System:
Menu level 2
Menu level 1
Select
Confirm
End
User Guidance
Level 2
Level 1
Level 3/Function
Page
15
“Mode”
“Picture”
Select the picture mode:
“Dynamic” t “Standard” t “Soft” t “Personal”
“Picture Adjustment”
Adjust the “Personal” option:
“Picture” t “Brightness” t “Color” t
“Hue” t “Sharpness” t “Reset”
“Color Temperature”
Adjust white color tint:
“Cool” t “Neutral” t “Warm”
“VM
”
Sharpen the edges of each object:
“High” t “Low” t “Off”
Optimize picture quality:
“Intelligent Picture”
“Mode”
“On” t “Off”
Select the sound mode:
16
“Sound”
“Dynamic” t “Drama” t “Soft” t “Personal”
Adjust sound frequency settings of “Personal”
“Sound Adjustment”
option:
“Adjust” t “Reset”
Select to emphasize the left and right speakers.
“Balance”
Adjust volume automatically:
“Intelligent Volume”
“On” t “Off”
Select the surround mode:
“Surround”
“On” t “Simulated” t “Off”
12 Menu Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
Level 3/Function
Page
Level 1
Level 2
18
Set TV to turn off automatically.
Set TV to turn on automatically.
“Timer”
“Sleep Timer”
“Wake Up Timer”
Preset channels automatically.
Preset channels manually.
“Channel Setup” “Auto Program”
“Manual Program”
19
Select the TV system:
“TV System”
“B/G” t “ I” t “D/K” t “M”
Label the program number.
Block unwanted programs.
Change the menu language:
“Program Label”
“Program Block”
21
“Setup”
“Language”
“English” t “
” (Arabic)
“Picture Rotation” Adjust the picture position.
“Wide Mode”
Change the picture size:
“On” (16:9 wide-mode) t “Off”
“Video Label”
Label the connected equipment.
“Color System”
Select the color system:
“Auto” t “PAL” t “SECAM” t“NTSC3.58” t
“NTSC4.43”
continue
Menu Adjustment
13
Download from Www.Somanuals.com. All Manuals Search And Download.
continued
How to use the menu
0
PROG
Picture
Mode:
Picture Adjustment
Color Temperature: Cool
Press MENU to
display the menu.
Dynamic
VM:
MENU
High
On
Intelligent Picture:
Select
Confirm
End
RESET
Press V or v to select
the desired item.
Channel Setup
Auto Program
Manual Program
TV System:
TV
B/G
Program Label
Program Block
Select
Confirm
End
Press
(or b) to
Channel Setup
Auto Program
confirm your
selection and
go to the next
level.
Manual Program
TV System:
Program Label
B/G
Program Block
Select
Confirm
End
Other menu operations
To
Press
V, v, B or b.
B or b.
Adjust the setting value
Move to the next/previous menu level
Cancel the menu
MENU.
Tips
• If you want to exit from Menu level 2 to Menu level 1, press V or v until the return icon ( ) is
highlighted, then press
.
• The MENU, t and 2 +/– buttons on the TV front panel can also be used for the operations
above (see page 8).
14 Menu Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
x Changing the “Picture” setting
The “Picture” menu allows you to adjust the picture settings.
Press MENU.
1
2
Make sure the “Picture” icon ( ) is
selected, then press
Picture
Mode:
Dynamic
.
Picture Adjustment
Color Temperature: Cool
VM:
High
On
Intelligent Picture:
Select
Confirm
End
Press V or v to select the desired item (e.g., “Mode”), then press
.
3
Select
To
“Mode”
choose either “Dynamic”, “Standard”, “Soft” or “Personal”* (see
page 11).
“Color Temperature”
adjust white color tint.
Choose either “Cool” (blue tint), “Neutral” (neutral tint) or
“Warm” (red tint).
“VM”
(Velocity Modulation)
sharpen the edges of each object.
Choose either “High”, “Low” or “Off”.
“Intelligent Picture”
optimize picture quality.
Press V or v to select “On”, then press
To cancel, select “Off”, then press
.
.
* You can adjust the setting to your personal preference in the “Picture Adjustment” ,
“Color Temperature” and “VM” options only when the “Personal” mode is selected.
Adjusting the “Picture Adjustment” items under
“Personal” mode
Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,
1
“Hue” (color tones) or “Sharpness”, then press
.
Selecting “Reset” will set your TV to the factory setting.
Press V,v,B or b to adjust the setting of your selected item, then press
.
2
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “Personal”.
Notes
• “Hue” can be adjusted for the NTSC color system only.
• Reducing “Sharpness” can also reduce picture noise.
Menu Adjustment
15
Download from Www.Somanuals.com. All Manuals Search And Download.
x Changing the “Sound” setting
The “Sound” menu allows you to adjust the sound settings.
Press MENU.
1
2
Sound
Press V or v to select the “Sound” icon ( ),
then press
Mode:
Dynamic
.
Sound Adjustment
Balance
Intelligent Volume:
Surround:
Off
Off
Select
Confirm
End
Press V or v to select the desired item (e.g., “Mode”), then press
.
3
Select
To
“Mode”
choose either “Dynamic”, “Drama”, “Soft” or “Personal”* (see
page 11).
“Balance”
Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
“Intelligent Volume”
adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select “On”, then press
To cancel, select “Off”, then press
.
.
“Surround”
choose either “On”, “Simulated” or “Off” (see page 9).
* You can adjust the setting to your personal preference in the “Sound Adjustment”
option only when the “Personal” mode is selected (see page 17).
16 Menu Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the “Sound Adjustment” item under
“Personal” mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of “Personal” mode in the menu.
Make sure that “Adjust” is selected,
1
Adjustment: Personal
then press
.
Adjust
Reset
Selecting “Reset” will set your TV to
the factory setting.
100 300 1k 3k
8k
Select
Confirm
End
Press B or b to select the desired sound frequency, then press V or v to
2
adjust the setting and press
.
The adjusted settings will be received when you select “Personal”.
Notes
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
• You may display the settings directly using the SOUND MODE button on the TV front panel
(see page 8) or button on the remote control (see page 10).
Menu Adjustment
17
Download from Www.Somanuals.com. All Manuals Search And Download.
x Changing the “Timer” setting
The “Timer” menu allows you to set TV to turn off and turn on automatically.
Press MENU.
1
2
Press V or v to select the “Timer” icon ( ),
then press
Timer
Sleep Timer:
Wake Up Timer:
Off
Off
.
Select
Confirm
End
Press V or v to select the desired item (e.g., “Sleep Timer”), then press
.
3
Select
To
“Sleep Timer”
set TV to turn off automatically.
Press V or v to select the desired period of time (max. of 1 hour
and 30 minutes), then press
.
“Wake Up Timer”
set TV to turn on automatically.
Press V or v to select the desired period of time (max. of 12
hours), then press
. After the selected length of time, the TV
switches on automatically and “Wake Up Timer” will appear on
the screen.
The
indicator on the TV lights up amber once you set the
“Wake Up Timer”.
Notes
• You can also cancel “Sleep Timer” and “Wake Up Timer” by turning off the TV’s main power.
• If no buttons or controls are pressed for more than one hour after the TV is turned on using
the “Wake Up Timer”, the TV automatically goes into standby mode.
18 Menu Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
x Changing the “Channel Setup”
setting
The “Channel Setup” menu allows you to preset channels automatically,
manually preset channels, select the TV system, label the program number and
block unwanted programs.
Press MENU.
1
2
Press V or v to select the “Channel Setup”
icon ( ), then press
Channel Setup
.
Auto Program
Manual Program
TV System:
B/G
Program Label
Program Block
Select
Confirm
End
Press V or v to select the desired item (e.g., “Auto Program”), then press
.
3
Select
To
“Auto Program”
“Manual Program”
preset channels automatically.
manually preset desired channels and channels that cannot be
preset automatically (see Presetting channels manually on
page 20).
“TV System”
select the TV system.
Press V or v to select either “B/G”, “I”, “D/K” or “M”, then
press
.
“Program Label”
label the program number.
(1) Select “Program” and press
.
Press V or v to select the program number, then press
(2) Select “Label” and press , then press V or v to select
.
.
alphanumeric characters for the label.
“Program Block”
block unwanted programs.
(1) Select “Program” and press
.
Press V or v to select the program number, then press
(2) Select “Block” and press
either “On” or “Off”.
, then press V or v to choose
If you preset a blocked program number, that program number
will be unblocked automatically.
Note
• During automatic channel presetting, your TV screen will indicate “B/G”, “I”, “D/K” or “M”
for the “TV System”.
continue
Menu Adjustment
19
Download from Www.Somanuals.com. All Manuals Search And Download.
continued
Presetting channels manually
After selecting “Manual Program”, select the program
number to which you want to preset a channel.
1
Manual Program
Program:
01
B/G
(1) Make sure “Program” is selected, then press
.
TV System:
VHF Low
Fine:
Auto
Off
(2) Press V or v until the program number you want
Skip:
to preset appears on the menu, then press
.
Select
Confirm
End
Select the desired channel.
2
(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press
.
(2) Press V or v until the desired channel’s broadcast appears on the TV screen,
then press
.
If the sound of the desired channel is abnormal, select the appropriate TV
system.
3
4
(1) Press V or v to select “TV System”, then press
.
(2) Press V or v until the sound becomes normal, then press
.
If you are not satisfied with the picture and sound quality, you may be able
to improve them by using the “Fine” tuning feature.
(1) Press V or v to select “Fine”, then press
.
(2) Press V or v to select “Manual”, then press
.
(3) Press V,v,B or b until the picture and sound quality are optimal, then press
.
The + or – icon on the menu flashes while tuning.
If you want to skip this program number when using PROG +/– , you can
select the “Skip” feature.
5
(1) Press V or v to select “Skip”, then press
.
(2) Press V or v to select “On”, then press
.
To cancel, select “Off”, then press
.
20 Menu Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
x Changing the “Setup” setting
The “Setup” menu allows you to change the menu language, adjust the picture
position, change the picture size, label the connected equipment and select the
color system.
Press MENU.
1
2
Press V or v to select the “Setup” icon ( ),
then press
Setup
Language:
English
Off
.
Picture Rotation
Wide Mode:
Video Label
Color System:
Auto
Select
Confirm
End
Press V or v to select the desired item (e.g., “Language”), then press
.
3
Select
To
“Language”
change the menu language.
Press V or v to select either “English” or “
” (Arabic), then
press
.
“Picture Rotation”
adjust the picture position when it is not aligned with the TV screen.
Press B or b to adjust the picture position, then press
.
“Wide Mode”
“Video Label”
choose either “On” or “Off” (see page 9).
label the connected equipment.
(1) Select “Video Input” and press
.
Press V or v to select the input you want to label, then press
.
(2) Select “Label” and press
, then press V or v to select the
label options: ”Video 1/Video 2/Video 3/DVD”, “VCR”,
“SAT”, “Game” or “Edit”*.
*
You may edit the video label by entering alphanumeric
characters.
“Color System”
select the color system.
Press V or v to select either “Auto”, “PAL”, “SECAM”,
“NTSC3.58” or “NTSC4.43”, then press
“Auto”.
. Normally, set this to
Menu Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Additional Information
x Connecting the 3D WOOFER
B KV-XR29M83/XR29M53 only
You can enjoy high quality sound by connecting the 3D WOOFER as follows:
Step 1
Step 2
Bottom of
3D WOOFER
Red wire
Black wire
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D
WOOFER wire strands stick out, making contact with the neighbouring 3D WOOFER terminal.
x Connecting optional components
Connecting to the video input terminal ( t )
TV front panel
Audio/Video cable
(not supplied)
L
(MONO)
R
Camcorder
3
TV rear panel
Video game
equipment
Antenna cable
(not supplied)
R
L
1
Y
2
C
B
CR
Audio/Video cable
(not supplied)
VCR
Notes
• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the
program number 0 on the TV (see page 20).
22 Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the monitor output terminal ( T )
TV rear panel
Audio system
C
B
CR
R
L
1
Y
2
Audio/Video cable
(not supplied)
VCR
Connecting to the component video input terminal (
)
TV rear panel
Component
video cable
(not supplied)
C
B
CR
R
L
1
Y
2
DVD player
Audio cable
(not supplied)
Notes
• If your DVD player can output interlace and progressive mode signals, select the interlace
output when connecting to
(component video input) on your TV. Your TV can receive
either 525i/60Hz or 625i/50Hz interlace signals.
• Some DVD player terminals may be labeled differently:
Connect
Y (green)
CB (blue)
CR (red)
To (on the DVD player)
Y
CB, PB, Cb or B-Y
CR, PR, Cr or R-Y
• If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks will not
be output properly. This does not indicate a malfunction.
Additional Information
23
Download from Www.Somanuals.com. All Manuals Search And Download.
x Troubleshooting
If you find any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.
Reset function
Press the RESET button on your remote control.
RESET
RESET
Your TV will go blank for a few seconds
then the “Initial Setup” menu will appear.
TV
Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.
Troubleshooting guide
Symptom
Possible cause
Solutions
Page
Snowy picture
• The connection is loose • Check the antenna cable and connection
22
or the cable is
damaged.
on the TV, VCR and at the wall.
• The antenna setup is
inappropriate.
• Check the antenna setup.
Contact a Sony dealer for advice.
–
Noisy sound
• Channel presetting is • Display the “Channel Setup” menu and
20
inappropriate or
incomplete.
select “Manual Program” to preset the
channel again.
• Signal transmission is • Try using a booster.
low.
–
–
Distorted picture
• Broadcast signals are
too strong.
• Turn off or disconnect the booster if it is in
use.
Noisy sound
Good picture
• Display the “Channel Setup” menu and
select the appropriate “TV System”.
20
• The TV system setting
is inappropriate.
Noisy sound
24 Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible cause
Solutions
Page
No picture
• The power cord,
antenna or VCR is not
connected.
• Check the power cord, antenna and VCR
connections.
22
• The TV is not turned
on.
• Press ?/1 (power).
9
8
• Press ! (main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
No sound
• The volume level is too
low.
Good picture
• Press 2 + to increase the volume level.
9
9
• The sound is muted.
• Press
to cancel the muting.
No sound
• There is local
• Do not use a hair dryer or other
equipment near the TV.
–
–
Dotted lines or
stripes
interference from cars,
neon signs, hair dryers,
power generators, etc.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Broadcast signals are
reflected by nearby
mountains or
• Use a highly directional antenna.
–
Double images or
“ghosts”
• Use the fine tuning (“Fine”) function.
20
buildings.
• The antenna setup is
inappropriate.
–
• Check the antenna setup. Contact a Sony
dealer for advice.
• Use of a booster is
inappropriate.
• Turn off or disconnect the booster if it is in
use.
–
• The color level setting
is too low.
•
Display the “Picture” menu and select
“Personal” of “Mode”, then adjust the
“Color” level in “Picture Adjustment”.
No color
15
• The color system
setting is
• Display the “Setup” menu and check the
“Color System” setting (usually set this to
“Auto”).
21
–
inappropriate.
• The antenna setup is
inappropriate.
• Check the antenna setup. Contact a Sony
dealer for advice.
continue
Additional Information
25
Download from Www.Somanuals.com. All Manuals Search And Download.
continued
Solutions
Page
Possible cause
Symptom
Picture slant
–
• The magnetic
disturbance from
•Keep external speakers or other electrical
equipment away from the TV.
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
•Display the “Setup” menu and adjust
“Picture Rotation” so that the picture
position is optimal.
21
–
•Keep external speakers or other
• The magnetic
Abnormal color
patches
equipment away from the TV. Do not
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.
disturbance from
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.
–
The 1 (standby)
indicator on your
TV flashes red
several times after
every three
seconds.
Count the number of times the 1
(standby) indicator flashes. Press !
(main power) to turn off your TV.
Contact your nearest Sony service
center.
•
•Your TV’s self-diagnosis
function indicates the
possible problems.
•
Changes in room
TV cabinet
creaks.
temperature sometimes
make the TV cabinet
expand or contract,
causing a noise. This
does not indicate a
malfunction.
–
–
—
—
A small “boom”
sound is heard
when the TV is
turned on.
•
The TV’s demagnetizing
function is working.
This does not indicate a
malfunction.
26 Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
x Specifications
KV-XR34M80
KV-XR34M50
KV-XR29M83
KV-XR29M53
KV-XR25M80
KV-XR25M50
KV-XR29M80
KV-XR29M50
Note
Power requirements
110-240 V AC, 50/60 Hz
Power consumption (W) Indicated on the rear of the TV
Television system
Color system
B/G, I, D/K, M
PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43
Channel coverage
B/G
VHF : E2 to E12
UHF : E21 to E69
CATV : S01 to S03, S1 to S41
I
UHF : B21 to B68
CATV : S01 to S03, S1 to S41
VHF : C1 to C12, R1 to R12
UHF : C13 to C57, R21 to R60
CATV : S01 to S03, S1 to S41, Z1 to Z39
D/K
VHF : A2 to A13
UHF : A14 to A79
M
CATV : A-8 to A-2, A to W+4, W+6 to W+84
75-ohm external terminal
8 (Antenna)
Audio output (Speaker)
3D Woofer
5 W + 5 W
-
6 W + 6 W
12 W
5 W + 5 W
-
Number of terminal
(Video)
Input: 3
Output: 1
Output: 1
Phono jacks; 1 Vp-p, 75 ohms
Phono jacks; 500 mVrms
Input: 3
Input: 1
(Audio)
Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
(Component
Video)
C
B: 0.7 Vp-p, 75 ohms
R: 0.7 Vp-p, 75 ohms
C
Audio: 500 mVrms
Output: 1
34 in.
86
Stereo minijack
i (Headphone)
Picture tube
29 in.
29 in.
72
25 in.
64
72
Measured
diagonally
Tube size (cm)
80
68
68
60
Measured
diagonally
Screen size (cm)
895 × 674 × 590 772 x 603 x 516 772 × 576 × 516 696 × 513 × 499
78 54 49 38
Dimensions (w/h/d, mm)
Mass (kg)
Design and specifications are subject to change without notice.
Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|