4-084-117-13(1)
Trinitron Color TV
GB
Operating Instructions
•
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-TG21
KV-PG14
M90
M72
© 2001 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
B WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 220 – 240 V AC.
• Do not plug in the power cord until you have completed making all other connections;
otherwise a minimum leakage current might flow through the antenna and other terminals to
ground.
• To avoid battery leakage and damage to the remote, remove the batteries from the remote if
you are not going to use it for several days. If any liquid that leaks from the batteries touches
you, immediately wash it away with water.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
For children’s safety, do not leave children alone
with the TV. Do not allow children to climb onto
it.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
To prevent fire or shock hazard, do not expose the
TV to rain or moisture.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such as
a bookcase or built-in cabinet.
Clean the TV with a dry and soft cloth. Do not
use benzine, thinner, or any other chemicals to
clean the TV. Do not scratch the picture tube.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are present
inside the TV. Refer servicing and disposal of the
TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING (continued)
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Do not place any objects on the TV.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
Install the TV on a stable TV stand and floor
which can support the TV set weight. Ensure that
the TV stand surface is flat and its area is larger
than the bottom area of the TV.
C Securing the TV
B KV-TG21 only
To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.
20 mm
3.8 mm
screws
clamps
band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
or
(1) Put a cord or chain through the
clamps.
(2) Screw one clamp to a wall or pillar
and the other clamp to the provided
hole at the rear of your TV.
Note
•
Use only the supplied screws. Use of other screws may damage the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
D TV front and rear panels
TV rear panel
0
R
L(MONO)
qa
qs
#
TV front panel
!
(MONO)
R
L
SELECT
PROGR
5
4
2 1
9
8
7 6
3
#
Button
1 !
2
Function
Turn off or turn on the TV.
Remote control sensor.
Standby indicator.
3 1
3
Stereo/bilingual indicator. (KV-TG21M90 only)
Bilingual indicator. (KV-PG14M72 only)
Wake Up indicator.
3
3
4 PROGR +/–
5 2 +/– *
6 t
Select program number.
Adjust volume.
Select TV or video input.
7 SELECT
8 i
Select the desired item.
Headphone terminal. (KV-TG21 only)
Earphone terminal. (KV-PG14 only)
Video input terminal.
8
9, qa t
0 8
Antenna input terminal.
qs T
Monitor output terminal.
*
You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote.
# The R (audio input) jacks are available for KV-TG21 only.
Download from Www.Somanuals.com. All Manuals Search And Download.
E Connecting optional components
Connecting to the video input terminal ( t )
TV front panel
(MONO)
#
R
L
Audio/Video cable
(not supplied)
Camcorder
TV rear panel
Video game
equipment
R
L(MONO)
Antenna cable
(not supplied)
Audio/Video cable
(not supplied)
VCR
#
Note
•
Do not connect video equipment to t (video input) at the front and the rear of your TV at
the same time; otherwise the picture will not be displayed properly on the screen.
Connecting to the monitor output terminal (T)
TV rear panel
R
L(MONO)
Audio system
Audio/Video cable
(not supplied)
VCR
#
# The R (audio input) jacks are available for KV-TG21 only.
Download from Www.Somanuals.com. All Manuals Search And Download.
F Troubleshooting
If you find any problem while viewing your TV, please check the following
guide. If any problem persists, contact your Sony dealer.
Symptom
Solutions
• Check the antenna cable and connection on the TV, VCR and on the wall.
• Preset the channel manually again. (See J)
• Check the antenna setup. Contact a Sony dealer for advice.
Snowy picture,
noisy sound
Good picture,
noisy sound
• Select the appropriate TV system. (See J)
• Press A/B until the sound is optimal. (KV-TG21M90 only)
• Check the power cord, antenna and the VCR connections.
• Press ?/1 (power) or ! (main power) to turn on the TV.
No picture,no sound
Good picture, no sound • Press 2 + to increase the volume level.
• Press % to cancel the muting.
• Do not use a hair dryer or other equipment near the TV.
• Check the antenna setup. Contact a Sony dealer for advice.
Dotted lines or stripes
Double images or
“ghosts”
• Use the fine tuning ("FINE") function. (See J)
• Turn off or disconnect the booster if it is in use.
• Check the antenna setup. Contact a Sony dealer for advice.
• Select the appropriate color system. (See J)
• Adjust the color level. (See K)
• Check the antenna setup. Contact a Sony dealer for advice.
No color
Abnormal color
patches
• Keep external speakers or other electrical equipment away from the TV.
Press ! (main power) to turn off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.
The 1 (standby)
indicator on your TV
flashes red several
times after every
three seconds.
• Count the number of times the 1 (standby) indicator flashes. Press !
(main power) to turn off your TV. Contact your nearest Sony service
center.
TV cabinet creaks.
• Changes in room temperature sometimes make the TV cabinet expand or
contract, making a noise. This does not indicate a malfunction.
A "boom" sound is
heard when the TV is
turned on.
• The TV's demagnetizing function is working. This does not indicate a
malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
G Specifications
KV-TG21M90
KV-PG14M72
Note
Power requirements
220-240 V AC, 50/60 Hz
Power consumption (W) Indicated on the rear of the TV
Television system
Color system
B/G, I, D/K, M
PAL, PAL 60, SECAM,NTSC3.58, NTSC4.43
NICAM Bilingual B/G, I, D/K
Stereo/Bilingual system NICAM Stereo/Bilingual
B/G, I, D/K A2 Stereo/
;
Bilingual B/G
Channel coverage
B/G
VHF : E2 to E12
UHF: E21 to E69
CATV : S01 to S03, S1 to S41
I
UHF : B21 to B68
CATV : S01 to S03, S1 to S41
D/K
VHF: C1 to C12, R1 to R12
UHF : C13 to C57, R21 to R60
CATV : S01 to S03, S1 to S41, Z1 to Z39
M
VHF : A2 to A13
UHF: A14 to A79
CATV : A-8 to A-2, A to W+4, W+6 to W+84
8 (Antenna)
75-ohm external terminal
Audio output (Speaker)
3W + 3W
Input: 2* Output: 1
Input: 2* Output: 1
3W
Number of terminal
(Video)
Phono jacks; 1 Vp-p, 75 ohms * One input line
available
(Audio)
Phono jacks; 500 m Vrms
* One input line
available
i (Headphone)
(Earphone)
Output: 1
Stereo minijack
KV-TG21M90 only
KV-PG14M72 only
Output: 1
Monaural minijack
Picture tube
21 in.
14 in.
Tube size (cm)
Screen size (cm)
Dimensions (w/h/d, mm)
Mass (kg)
54
37
Measured diagonally
Measured diagonally
51
497 x 458 x 487
25
34
375 x 346 x 411
12
Design and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
H Remote control
See
Button
Function
0
–
1 ?/1
Turn off temporarily or
turn on the TV.
qa
1
2
–
–
2 a
Display the TV program.
qs
qd
3 JUMP
Jump to previous
program number.
1
4
3
6
9
2
5
8
4 PROGR +/–
5 2 +/–
6 SELECT
7 PIC MODE
9 +/–
Select program number.
Adjust volume.
–
–
–
qf
7
Select the desired item.
Select picture mode.
Adjust items.
JUMP
-
SOUND
MODE
0
3
4
K
PROGR
2
–
–
qg
qh
0
Display on-screen
information.
5
qa %
Mute the sound.
–
–
–
qj
qk
ql
6
qd t
Select TV or video input.
Input numbers.
qf 0 – 9, ÷
7
8
FAVORITE
Timer operations
qj
Set TV to turn on
automatically.
I
I
9
qk
Set TV to turn off
automatically.
TV
Sound mode operations (KV-TG21M90 only)
qg SOUND MODE Select sound mode.
K
Stereo/bilingual operations
M
qh A/B
Select stereo/bilingual
mode.
Teletext operations (green label)
8 x (red, green,
yellow, blue)
0
qs
–
–
Not function for your TV.
qd
qh
qj
qk
ql FAVORITE
Not function for your TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
I
Setting the timers
You can turn on and off your TV by using the and buttons respectively.
Setting the Wake Up timer
\/1
Press until the desired period of time appears
1on the screen.
1
4
2
5
8
3
6
9
WAKE UP TIMER:0H10M
(After 10 minutes)
7
JUMP
-
SOUND
MODE
0
PROGR
2
WAKE UP TIMER:OFF
(No Wake Up timer)
WAKE UP TIMER:12H00M
(After 12 hours)
The Wake Up timer starts immediately after you
have set it.
FAVORITE
Select the program number or video input you
2 want to wake up to.
TV
Press \/1, or set the Sleep timer if you want the
3 TV to turn off automatically.
The indicator on the TV lights up orange when
the TV goes into standby mode.
Setting the Sleep timer
Press until the desired period of time appears
on the screen.
SLEEP TIMER:30M
(After 30 minutes)
SLEEP TIMER:60M
(After 60 minutes)
SLEEP TIMER:OFF
(No Sleep timer)
SLEEP TIMER:90M
(After 90 minutes)
The Sleep timer starts immediately after you have
set it.
Notes
•
•
You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power.
If no buttons or controls are pressed for more than two hours after the TV is turned on using
the Wake Up timer, the TV automatically goes into standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
J Presetting channels
You can automatically preset up to 100 TV channels in numerical sequence
from program number 1, or manually preset desired channels and channels
that cannot be preset automatically.
Presetting channels automatically
from a specified program number
Press SELECT until “AUTO PROGRAM” appears
1
4
2
5
8
3
6
9
1 on the screen.
Number
buttons
7
Press + or – once to enter the “AUTO
2 PROGRAM” mode.
JUMP
-
SOUND
MODE
0
PROGR
2
The on-screen display will start flashing.
Press PROGR +/– or the number buttons until
3the desired program number appears on the
+ or –
screen.
FAVORITE
Press + or – to start presetting channels
PIC MODE
SELECT
4automatically.
TV
PROGR +/–
Presetting channels manually
Press SELECT until “MANUAL PROGRAM”
1appears on the screen.
Press + or – once to enter the “MANUAL
2 PROGRAM” mode.
Press PROGR +/– or the number buttons until
3 the desired program number appears on the
screen.
Press + or – until the desired channel picture
4 appears on the screen.
To preset other channels manually, repeat steps
5 3 to 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting channels (continued)
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the 8 (antenna
input) terminal
(1) Press SELECT until “TV SYS” appears on the screen.
(2) Press + or – to select the appropriate TV system until the picture or sound quality
is optimal.
B/G
I
D/K
M
To change the color system setting
If the color is abnormal when receiving programs through the
8
(antenna input)
terminal or the t (video input) terminal
(1) Press SELECT until “COLOR SYS” appears on the screen.
(2) Press + or – to select the appropriate color system until the color is optimal.
AUTO PAL SECAM NTSC3.58 NTSC4.43
To skip program numbers
(1) Press PROGR +/– or the number buttons until the unused or unwanted program
number appears on the screen.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – once to enter the “MANUAL PROGRAM” mode.
(4) Press PIC MODE to skip the unused or unwanted program number.
(5) Press SELECT to exit the “MANUAL PROGRAM” mode.
Note
•
To restore the skipped program number again, preset the channel automatically or manually.
To use the fine tuning function
The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – once to enter the “MANUAL PROGRAM” mode.
(4) Press
to display “FINE” on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to exit the “MANUAL PROGRAM” mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
K Customizing the picture and sound
You can customize the picture and sound by selecting the picture and sound
modes or by adjusting its settings.
Selecting the picture mode
Press PIC MODE to select the desired picture mode.
Select
To
1
4
2
5
8
3
6
9
“DYNAMIC”
“STANDARD”
“SOFT”
view high contrast pictures.
view normal contrast pictures.
view mild pictures.
7
JUMP
-
SOUND
MODE
0
PROGR
2
SOUND
MODE
Selecting the sound mode
B KV-TG21M90 only
SELECT
+ or –
Press SOUND MODE to select the desired sound
mode.
FAVORITE
PIC MODE
Select
To
TV
“9 DYNAMIC”
listen to dynamic and clear
sound that emphasizes the low
and high sound.
“9 DRAMA”
listen to sound that emphasizes
vocals and background music.
“9 SOFT”
listen to soft sound.
Adjusting the picture and sound settings
Press SELECT until the desired setting appears.
1
Each time you press SELECT, the setting item will change as follows:
PICTURE
COLOR
BRIGHT
BASS
HUE
BALANCE
TREBLE
SHARP
Press + or – to adjust the item.
2
3
To adjust other items, repeat steps 1 to 2.
Notes
•
•
•
“BASS”, “TREBLE” and “BALANCE” can be adjusted for KV-TG21M90 only.
“HUE” can be adjusted for the NTSC color system only.
Reducing “SHARP” can also reduce picture noise.
Download from Www.Somanuals.com. All Manuals Search And Download.
L Adjusting the picture position
B KV-TG21M90 only
If the picture is slanting, you can adjust the picture position using the
“PIC ROTATION” function until it is optimal.
Slanting
Optimal
Good morning!
Press SELECT repeatedly until “PIC ROTATION”
1appears on the screen.
+ or –
Press + or – to adjust the picture position.
FAVORITE
2
SELECT
+
The
or
icon on the screen flashes while
adjusting.
Note
•
To reduce the slanting picture, keep external speakers or other electrical equipment away
from the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
M
Enjoying stereo or bilingual
programs
You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.
When receiving a NICAM program
Broadcasting
On-screen display (Selected sound)
NICAM
stereo
(KV-TG21M90 only)
1
4
2
5
8
3
6
9
MONO
(Regular sound)
NICAM
(Stereo sound)
t
7
JUMP
-
SOUND
MODE
0
NICAM
bilingual
PROGR
2
NICAM MAIN
(Main sound)
NICAM SUB
(Sub sound) (Regular sound)
MONO
t
t
A/B
NICAM
monaural
MONO
(Regular sound)
NICAM MAIN
(Main sound)
t
FAVORITE
TV
When receiving an A2 program
B KV-TG21M90 only
Broadcasting
On-screen display (Selected sound)
A2
stereo
STEREO
(Stereo sound)
MONO
(Regular sound)
t
A2
bilingual
SUB
(Sub sound)
MAIN
(Main sound)
t
Notes
•
If the sound is distorted when receiving a monaural program through the 8 (antenna)
terminal, press A/B repeatedly until “MONO” appears on the screen. To cancel the monaural
sound setting, press A/B again until “AUTO” appears on the screen.
KV-TG21M90 only
•
If the stereo sound is noisy when receiving a stereo program, select “MONO”. The sound
becomes monaural, but the noise is reduced.
•
Before receiving a NICAM stereo program in China, please check the NICAM broadcast
condition in your area. When receiving a NICAM stereo program, the receiving conditions
might vary depending on area. In addition, different strength of the NICAM broadcast signal
might affect the receiving quality.
Download from Www.Somanuals.com. All Manuals Search And Download.
|