Sony CRT Television KV F29 User Manual

3-810-564-11 (1)  
Trinitron Color TV  
Operating Instructions  
KV-F25  
KV-F29  
MN11  
1995 by Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COLOR  
TV MANUAL AUTO  
SYSTEM SYSTEM PROGR PROGR  
VIDEO  
L
)
AUDIO  
R
S1 VIDEO  
2
(
MONO  
ENTER  
(CLEAR)  
+
MENU  
VIDEO IN 3  
TV  
SYSTEM  
B/G  
I
D/K  
M
AUTO  
PROGR  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Table of contents  
6
Connections  
7
9
10  
Presetting channels  
Introducing the menu  
Changing the menu language  
Operations  
11  
12  
14  
15  
16  
17  
Watching the TV  
Adjusting the picture  
Adjusting the sound  
Selecting a stereo or bilingual program  
Viewing Teletext  
Customizing the TV (SET UP)  
Additional Information  
20  
Troubleshooting  
back Specifications  
cover  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Connections  
Connecting a VHF antenna or a combination VHF/UHF antenna  
— 75-ohm coaxial cable (round)  
Attach an optional IEC antenna connector to the 75-ohm coaxial cable.  
Plug the connector into the  
(antenna) socket at the rear of the TV.  
Rear of TV  
Rear of TV  
On a wall  
or  
Connecting optional equipment  
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder,  
headphones, or stereo system.  
to antenna  
socket  
Rear of TV  
VIDEO IN MON/TV  
OUT  
1
2
to antenna  
output  
VIDEO  
VCR  
(
)
MONO  
L
S1 VIDEO  
AUDIO  
R
Video (yellow)  
Audio-L (white)  
Audio-R (red)  
to video  
and audio  
outputs  
to video  
and audio  
inputs  
to S video  
output  
)
S1 VIDEO VIDEO  
L
AUDIO  
R
(
MONO  
VIDEO N 3  
to video and  
audio outputs  
Camcorder  
: Signal  
flow  
When connecting a monaural VCR  
Connect the yellow plug to VIDEO and the black plug to  
AUDIO-L (mono).  
Note on the S1-Video signal  
When inputting the S1-Video signal through the VIDEO IN 1 or  
VIDEO IN 3 jack, turn wide mode OFF if you do not want to  
display the picture in wide mode (see page 17).  
When both S1-Video and video signals are input  
The S1-Video input signal is selected. To view a video signal,  
disconnect the S1-Video connection.  
Note on the video input  
When no signal is input, the screen becomes blue.  
Getting Started  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Press AUTO PROGR.  
Presetting channels  
AUTO  
PROGR  
1
2
3
1
To start presetting channels automatically  
from the specified program position  
1
2
3
4
Press MANUAL PROGR.  
Press TV SYSTEM to select your local TV system.  
Press PROGR +/– to select the program position.  
Press AUTO PROGR.  
You can preset TV channels easily by storing all the  
receivable channels automatically. You can also preset  
channels manually or disable program positions.  
Presetting channels automatically  
You can preset up to 100 TV channels in numerical  
sequence from program position 1.  
1
POWER  
COLOR  
TV MANUAL AUTO  
SYSTEM SYSTEM PROGR PROGR  
ENTER  
(CLEAR)  
+
MENU  
2
3
1
2
Press POWER.  
POWER  
When the TV is in standby mode after pressing  
POWER, press POWER on the remote commander.  
Press TV SYSTEM to select your local TV  
system.  
TV  
SYSTEM  
B/G  
I
D/K  
M
Getting Started  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Presetting channels manually  
Disabling program positions  
To change the program position for a channel or to  
receive a channel with a weak signal, preset the  
channel manually.  
By disabling unused or unwanted program positions,  
you can skip those positions when you press PROGR  
+/.  
1
2
Press MANUAL PROGR.  
1
Press PROGR +/until the unused or  
unwanted program position appears on the  
screen.  
Press PROGR +/until the required program  
position appears on the screen.  
2
3
4
Press MANUAL PROGR.  
3
4
Press TV SYSTEM to select your TV system.  
Press ENTER (CLEAR) on the TV.  
Press MANUAL PROGR.  
Press + or until the required channel  
picture appears on the screen.  
To cancel the skip setting  
Preset the channel manually or automatically again.  
5
Press MANUAL PROGR.  
If the TV system is not properly selected  
The color of the picture may be poor and/or the sound  
may be noisy. In this case, select the appropriate TV  
system.  
1
2
Press PROGR +/to select the program position.  
Press TV SYSTEM until the picture and sound  
become normal.  
TV SYSTEM  
Note  
The setting of the TV SYSTEM is memorized for each program  
position.  
Getting Started  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introducing the  
menu  
You can use the on-screen menus to set the picture  
quality, sound, and other settings. You can use buttons  
on both the remote commander and the TV to operate  
the menus.  
Main menu  
/中文  
(KV-F29MN11 only)  
Getting back to the previous menu  
Cancelling the menu screen  
Move the cursor (z) up to the first line of each  
menu (except the main menu), and press  
ENTER.  
Press MENU.  
Notes  
If more than 60 seconds elapse after you press a button, the  
menu screen disappears automatically.  
You can display all of the features available for the TV in  
DEMO mode.  
Getting Started  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting back to the English menu  
Changing the menu  
language  
1
Press MENU.  
MENU  
2
Press + or to move the cursor (z) to the  
fourth line from the top (“  
/LANGUAGE).  
If you prefer Chinese to English, you can change the  
menu language. You can use buttons on both the  
remote commander and the TV.  
+ or –  
MENU  
ENTER  
3
4
5
Press ENTER.  
ENTER  
1
2
Press MENU.  
/中文  
MENU  
Press ENTER.  
ENTER  
Press + or to move the cursor (z) to  
LANGUAGE.  
/中文  
Press MENU to return to the normal screen.  
MENU  
3
4
5
6
Press ENTER.  
ENTER  
/中文  
Press + or to select CHINESE.  
/中文  
Press ENTER.  
ENTER  
/中文  
Press MENU to return to the normal screen.  
MENU  
Getting Started  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations  
Switching off the TV  
Watching the TV  
To switch off the TV temporarily, press POWER on the  
remote commander.  
POWER  
To switch off the TV completely, press POWER.  
If the power on the TV is turned off in standby mode,  
the STANDBY indicator may remain alight for a while.  
1
2
Press POWER to turn the TV on.  
POWER  
POWER  
When the TV is in standby mode after pressing  
POWER, press POWER on the remote commander.  
Watching the video input  
Select the TV channel you want to watch.  
Press VIDEO/HOLD.  
To select a channel directly  
Press a number button.  
VIDEO  
HOLD  
1
4
2
5
8
0
3
6
9
VIDEO 1  
VIDEO 2  
VIDEO 3  
1
7
÷
To watch TV, press TV.  
To select a two-digit channel, press -/--before  
the number buttons.  
TV  
For example: to select channel 25, press -/--,and  
then 2and 5.”  
÷
2
5
To scan through channels  
Press PROGR/PAGE +/until the channel you  
want appears.  
PROGR/PAGE  
3
Press VOL +/to adjust the volume.  
VOL  
ed  
Operations  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Muting the sound  
Adjusting the picture  
Press MUTING.  
MUTING  
+ or –  
MENU  
ENTER  
MUTING  
1
Press MENU.  
Displaying on-screen information  
MENU  
Press DISPLAY/REVEAL.  
The program position, local system, and TV settings are  
displayed on the screen.  
DISPLAY  
REVEAL  
2
Press + or to move the cursor (z) to VIDEO  
CONTROL.  
1
1
AUTO  
B/G  
DYNAMIC MUSIC  
3
4
Press ENTER.  
Setting the Sleep Timer  
ENTER  
You can set the TV to turn off automatically after the  
period of time you set.  
Press SLEEP/INDEX.  
Press + or to select the setting, and press  
ENTER.  
SLEEP INDEX  
Select  
To  
DYNAMIC  
MIDDLE  
SOFT  
Display more contrast picture  
Display normal contrast picture  
Display picture suitable for movies and  
video games  
PERSONAL  
Display the picture that is adjusted using  
ADJUSTMENT  
SLEEP 30  
After 30  
minutes  
SLEEP 60  
After 60  
minutes  
SLEEP 90  
After 90  
minutes  
SLEEP OFF  
No sleep  
timer  
ADJUSTMENT  
Make specific adjustments. See Adjusting  
the picture setting (ADJUSTMENT).”  
To cancel the Sleep Timer, press SLEEP/INDEX  
repeatedly until SLEEP OFFappears, or turn the TV  
off.  
5
Press MENU to return to the normal screen.  
Operations  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the color of the picture is abnormal  
Adjusting the picture setting  
(ADJUSTMENT)  
When receiving programs through the  
Press TV SYSTEM or COLOR SYSTEM until the color  
becomes normal.  
terminal:  
You can adjust the picture to your own taste with the  
ADJUSTMENT option. The adjusted settings are stored  
in the PERSONAL option.  
COLOR SYSTEM  
TV SYSTEM  
1
2
Press MENU.  
Press + or to move the cursor (z) to VIDEO  
CONTROL, and press ENTER.  
Note  
Normally set COLOR SYSTEM to AUTO.  
3
4
Press + or to move the cursor (z) to  
ADJUSTMENT, and press ENTER.  
Press + or to move the cursor (z) to the  
item you want to adjust, and press ENTER.  
5
Press + or to adjust the item, and press  
ENTER.  
Item  
Press + to  
Press to  
PICTURE Increase picture  
contrast  
Decrease picture  
contrast  
COLOR  
Increase color  
intensity  
Decrease color  
intensity  
BRIGHT  
HUE  
Brighten the picture  
Darken the picture  
Make skin tones  
become greenish  
Make skin tones  
become reddish  
SHARP  
Sharpen the picture  
Soften the picture  
6
7
To adjust other items, repeat steps 4 and 5.  
Press MENU to return to the normal screen.  
Note  
You can adjust HUE for NTSC color system only.  
Operations  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the sound setting  
(ADJUSTMENT)  
Adjusting the sound  
You can adjust the sound to your own taste with the  
ADJUSTMENT option. The adjusted settings are stored  
in the PERSONAL option.  
1
2
Press MENU.  
+ or –  
MENU  
ENTER  
Press + or to move the cursor (z) to AUDIO  
CONTROL, and press ENTER.  
3
4
Press + or to move the cursor (z) to  
ADJUSTMENT, and press ENTER.  
1
Press MENU.  
Press + or to move the cursor (z) to the  
item you want to adjust, and press ENTER.  
MENU  
2
Press + or to move the cursor (z) to AUDIO  
CONTROL.  
5
Press + or to adjust the item, and press  
ENTER.  
Press + to  
Item  
Press to  
Increase the bass  
sound  
BASS  
Decrease the bass  
sound  
Increase the treble  
sound  
TREBLE  
Decrease the treble  
sound  
3
4
Press ENTER.  
Increase the volume  
of right speaker  
BALANCE  
Increase the volume  
of left speaker  
ENTER  
6
7
To adjust other items, repeat steps 4 and 5.  
Press MENU to return to the normal screen.  
Press + or to select the sound that you  
want, and press ENTER.  
If the sound is distorted or noisy  
When receiving programs through the  
Press TV SYSTEM until the sound becomes clear.  
terminal:  
Select  
MUSIC  
NEWS  
To  
Listen to music programs.  
Listen to news program. A persons  
voice can be heard clearly.  
TV SYSTEM  
STANDARD  
PERSONAL  
ADJUSTMENT  
Listen to sound other than music or  
news.  
Listen to the sound that is adjusted  
using ADJUSTMENT.  
Make specific settings. See Adjusting  
the sound setting (ADJUSTMENT).”  
5
Press MENU to return to the normal screen.  
Operations  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiving area for NICAM and A2 (German)  
programs  
Selecting a stereo or  
bilingual program  
System  
Receiving area  
NICAM  
Hong Kong, Singapore,  
New Zealand, etc.  
A2 (German)  
Australia, Malaysia,  
Thailand, Indonesia, etc.  
Notes  
If the signal is very weak, the sound becomes monaural.  
If the stereo sound is noisy, select regularor mono.”  
The sound becomes monaural, however, the noise will be  
reduced.  
You can enjoy stereo sound or bilingual program of  
NICAM and A2 (German) systems. The initial setting is  
stereo sound.  
Press A/B/ENLARGE repeatedly until you  
receive the sound you want.  
The sound changes and the corresponding indicator  
lights up as follows:  
A/B  
ENLARGE  
A
B
When receiving a NICAM program:  
On-screen Selected sound  
Broadcasting  
display  
(indicator)  
NICAM  
Stereo Regular  
NICAM stereo  
(A and B)  
NICAM  
NICAM  
A B Regular  
NICAM bilingual  
NICAM monaural  
(A) (B)  
Monaural Regular  
(A)  
When receiving a A2 (German) program:  
On-screen Selected sound  
Broadcasting  
display  
(indicator)  
STEREO  
Stereo (A and B)  
A2 (German)  
stereo  
A2 (German)  
bilingual  
A B A+B  
(A) (B) (A and B)  
Operations  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking the contents of a Teletext  
service (INDEX)  
Viewing Teletext  
Press SLEEP/INDEX to display an overview of  
the Teletext contents and page numbers.  
Using FASTEXT  
TV stations broadcast an information service called  
Teletext via a TV channel.  
Teletext service allows you to receive various  
information such as weather forecasts or news at any  
time you want.  
This feature allows you to quickly access a Teletext  
page that uses FASTEXT. When a FASTEXT page is  
broadcast, a color-coded menu appears at the bottom of  
the screen. The colors of the menu correspond to the  
RED, GREEN, YELLOW, and CYAN buttons on the  
remote commander. These color buttons function as the  
FASTEXT buttons in Teletext mode.  
DISPLAY/REVEAL  
VIDEO/HOLD  
TV  
TEXT  
Press the color button which corresponds to  
the color-coded menu.  
The page is displayed after a few seconds.  
Number  
SLEEP/INDEX  
A/B/ENLARGE  
FASTEXT  
PROGR/PAGE +/–  
Selecting a Teletext page  
To input the three-digit page number of the  
Teletext page, press the number buttons.  
If you make a mistake, key in the correct page number  
again.  
Displaying Teletext  
To access the next or previous page, press  
PROGR/PAGE +/.  
1
2
Select a TV channel which carries the  
Teletext broadcast you want to watch.  
Press TEXT to display the Teletext.  
A Teletext page is displayed (normally the index  
page). If there is no Teletext broadcast, P100 is  
displayed at the top left corner of the screen.  
Holding a Teletext page  
A Teletext page may consist of several subpages. You  
can stop the page scrolling in order to read the text at  
your own pace.  
To cancel the Teletext display, press TV.  
Press VIDEO/HOLD.  
The HOLD symbol ˝ is displayed at the top left  
corner of the screen.  
Superimposing a Teletext page on the  
TV picture  
To resume normal Teletext operation, press  
TEXT.  
Press TEXT.  
Each time you press TEXT, the screen changes as  
follows:  
Teletext n Teletext and TV n TV  
Operations  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Revealing concealed information  
Customizing the TV  
(SET UP)  
Sometimes pages contain concealed information, such  
as an answer to a quiz. The reveal option lets you  
disclose the information.  
Press DISPLAY/REVEAL.  
To conceal the information, press DISPLAY/REVEAL again.  
Turning wide mode  
Enlarging the Teletext display  
When receiving the signal conforming to wide mode  
(S1-Video signal), you can change the size of the  
picture on the screen.  
Press A/B/ENLARGE.  
Each time you press A/B/ENLARGE, the Teletext  
display changes as follows:  
4
16  
Enlarge  
upper half  
Enlarge  
lower half  
n
n
n
Normal size  
3
9
Conventional mode  
Wide mode  
1
2
Press MENU.  
Press + or to select SET UP, and press  
ENTER.  
3
4
Press + or to select WIDE, and press  
ENTER.  
Press + or to select the wide mode to suit  
the size of the picture you want to display  
on the TV screen.  
Select  
To  
ON  
Display the picture on the screen in  
wide mode  
AUTO  
OFF  
Display the picture on the screen in  
wide mode automatically when  
receiving the S1-Video signal through  
the S1-Video input jack  
Display the picture on the screen in  
conventional size  
Note  
When the picture is in wide mode, the bright lines which are  
used for adjusting the CRT at optimum level appear at the top  
of the screen.  
Operations  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the AV OUT (advanced rec-out)  
terminal  
Selecting the surround sound  
You can enjoy a surround sound effect that is like being  
in a music hall when receiving stereo signals.  
You can select the output signal from the MON/TV  
OUT jacks at the rear of the TV.  
1
2
Press MENU.  
1
2
Press MENU.  
Press + or to select SET UP, and press  
ENTER.  
Press + or to select SET UP, and press  
ENTER.  
3
4
Press + or to select SURROUND, and press  
ENTER.  
3
4
Press + or to select AV OUT, and press  
ENTER.  
Press + or to turn the surround sound on  
or off, and press ENTER.  
Press + or to select the output signal, and  
press ENTER.  
Select  
To  
ON  
Listen to surround sound that is  
effective for stereo signals  
Select  
TV  
To  
Output the TV signal.  
SPACE  
OFF  
Listen to surround sound that is  
effective for monaural signals  
MONITOR  
Output the signal of the picture you  
are watching as a monitor.  
Turn off surround sound  
Note  
Do not change the channel while recording with a VCR  
through the MON/TV OUT jacks. If you change the channel, it  
also changes the channel you are recording.  
Operations  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reducing the noise of the picture  
Adjusting the tilt of the picture  
p KV-F29MN11/F29MH11 only  
You can reduce the noise level of the picture when the  
TV receives a weak signal or when you play a  
videotape that is in poor condition.  
You can adjust the tilt of the picture if it is not aligned  
to the TV screen. This may happen due to the direction  
of the earths magnetic field in relation to the position  
of the TV.  
1
2
Press MENU.  
Press + or to select SET UP, and press  
ENTER.  
1
2
Press MENU.  
Press + or to select SET UP, and press  
ENTER.  
3
4
Press + or to select VIDEO NR, and press  
ENTER.  
Press + or to turn the noise reduction on  
or off, and press ENTER.  
3
4
Press + or to select TILT CORRECTION, and  
press ENTER.  
Press + or to select the most suitable  
value to align the picture position.  
TILT CORRECTION : 3 N 2 N 1 N 0 n +1 n +2 n +3  
+
Operations  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Good picture  
Noisy sound  
Troubleshooting  
/Check the TV SYSTEM setting.  
No picture  
No sound  
If you have any problems, read this manual again and  
check the countermeasure for each of the symptoms  
listed below.  
If the problem persists, contact your nearest authorized  
service center or dealer.  
/Press POWER.  
/Check the antenna connection.  
/Check the VCR connections.  
Snowy picture  
Noisy sound  
Good picture  
No sound  
/Check the antenna.  
/Check the antenna connection on the TV  
and on the wall.  
/Check the TV SYSTEM setting.  
/Press VOLUME +.  
/Press MUTING.  
/Press A/B/ENLARGE.  
Dotted lines or stripes  
No color  
/This may be caused by local interference  
(e.g. cars, neon signs, hair dryers, etc.).  
Adjust the antenna for minimum  
interference.  
/Adjust the COLOR level in the VIDEO  
CONTROL menus ADJUSTMENT option.  
/Check the COLOR SYSTEM setting.  
Double images or ghosts”  
TV cabinet creaks  
/Even if the picture or the sound is normal,  
changes in the room temperature  
sometimes make the TV cabinet expand or  
contract, making a noise. This does not  
indicate a malfunction.  
/This may be caused by reflections from  
nearby mountains or buildings. A highly  
directional antenna may improve the  
picture.  
OpAdditional Information  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Note  
KV-F25MN11  
110-240 V AC, 50/60 Hz  
163  
KV-F29MN11  
Power requirements  
Power consumption (W)  
Television system  
Color system  
169  
B/G, I, D/K, M  
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58  
NICAM Stereo B/G, I ; A2 Stereo (German) B/G  
Stereo system  
Channel coverage  
B/G  
VHF : E2 to E12 / UHF : E21 to E69 / CATV : S01 to S03, S1 to S20  
UHF : B21 to B68 / CATV : S01 to S03, S1 to S20  
I
D/K  
M
VHF : R1 to R12 / UHF : R21 to R60 / CATV : S01 to S03, S1 to S20  
VHF : A2 to A13 / UHF : A14 to A79/  
CATV : A-8, A-7 A-2 to W  
Antenna  
75-ohm external antenna terminal for VHF/UHF  
Audio output (speaker)  
6W × 2  
Number of terminal  
Video  
Input : 3 Output : 1  
Input : 3 Output : 1  
Input : 2  
Audio  
S1-Video  
Y : 1 Vp-p, 75 ohms,  
unbalanced, sync  
negative  
C : 0.286 Vp-p, 75 ohms  
Picture tube  
Super Trinitron  
Tube size (inch)  
Screen size (cm)  
Dimensions (w/h/d, mm)  
Mass (kg)  
25  
29  
Measured diagonally  
Measured diagonally  
60  
690 × 521 × 511  
35  
68  
782 × 593 × 534  
47  
Accessories  
Supplied  
Remote commander (1)  
Size R6 (AA) battery (2)  
Magic commander RM-829, RM-848  
TV stand SU-F25  
Optional  
TV stand SU-F29  
Design and specifications are subject to change without notice.  
Sony Corporation Printed in Indonesia  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shure Headphones PGA52 User Manual
Silvercrest Coffeemaker SKAT1000A1 User Manual
Snapper Automobile Parts GC9520KWV User Manual
Sony Car Stereo System CDX L470X User Manual
Sony PDAs Smartphones PEG TG50 User Manual
Sony Satellite Radio 3 873 945 12 1 User Manual
Sterling Plumbing Indoor Furnishings 11850 4 User Manual
Sunbeam Electric Heater HE2050 User Manual
System Works Water System 99101100 User Manual
Tannoy Speaker iw4DC User Manual