Sonance Speaker ST2432D Series User Manual

ST2432D Series  
24” x 24” Hemispherically-Radiating  
®
SpeakerTile  
Recommended Installations:  
9/16” T-bar suspended ceiling systems  
15/16” T-bar suspended ceiling systems  
Recommended Environment:  
• Indoor or weather-protected outdoor  
Recommended Accessories:  
• PBB 2.0 Backbox kit  
• ECS2432D Enclosure compensation module  
• Safety Strap (secures SpeakerTile to back-  
box)  
Available Models:  
ST2432D:  
Plain white (shown in photo)  
ST2432D-3D1:  
Fine Fissured® (or similar) tile pattern  
HIGH QUALITY, WIDE-DISPERSION  
INVISIBLE SPEAKERTILE®  
ST2432D-3D2:  
Cortega® (or similar) tile pattern  
ST2432D-3D4:  
The Sound Advance® ST2432D SpeakerTile® is a remarkable combination of wide  
bandwidth, wide dispersion, and a highly-refined aesthetic presentation, designed  
for commercial installations. It is part of a unique family of truly invisible distributed  
sound products from Sound Advance.  
Fissured® (or similar) tile pattern  
ST2432D-3D7:  
Optima®/Ultima® (or similar) tile pattern  
ST2432D-3D21:  
All ST2432D SpeakerTile models are available in several mounting options,  
allowing them to be easily installed into standard T-bar suspended ceiling systems,  
completely replacing a standard 2 ft x 2 ft ceiling tile.  
Cirrus® (or similar) tile pattern  
Tegular cuts are available to match tegular  
ceiling tiles on 15/16” T-bar grids. Tegular cuts  
are not required to match tegular ceiling tiles  
on 9/16” T-bar grids. (See below for ceiling tile  
examples.) Call Sound Advance for details.  
The ST2432D is available in six different models, featuring a selection of standard  
3-dimensional patterns or factory-applied surface finishes that allow a match with  
almost any suspended ceiling tile pattern. The white Expanded PolyStyrene® (EPS)  
front surface of the speaker tile allows all models to optionally be finished on-site  
with any water-soluble finish, such as latex paint, or covered with light wallpaper,  
fabrics and selected texture coats*, further enhancing the SpeakerTile’s ability to  
blend invisibly with almost any interior design choice.  
Flush  
T-Bar and  
9
Patented Planar Diaphragm Technology™ allows a ST2432D that has been  
properly installed in a suspended ceiling to radiate sound in a 140° hemispherical  
pattern with smooth, even coverage. This dispersion characteristic allows ST2432D  
speakers to be spaced farther apart than narrow-dispersion conventional speakers,  
reducing the total quantity of loudspeakers required in almost any installation.  
/
16” Grid  
Ceiling Tile  
Variations  
Tegular  
Tegular  
The ST2432D is a two-way, full-range device that utilizes a crossover centered at  
1,200Hz, with 12dB per octave slopes for both low-pass and high-pass sections.  
The ST2432D is transformer-coupled, with the following input taps: 0.5W, 1W, 2W,  
4W, 8W, 16W, 32W and 8-ohm bypass.  
9
9
/
16” Grid  
/
16” Grid  
An optional PBB 2.0 backbox is available, and is recommended for use when  
the SpeakerTile is installed in air handling spaces. An optional ECS enclosure  
compensation module is available, to optimize performance when the ST2432D is  
used with the PBB 2.0.  
Flush  
Tegular  
15  
15  
/
16” Grid  
/
16” Grid  
[*Please contact Sound Advance for advice before applying any textured coating, light  
wallpaper or fabrics to the ST2432D.]  
Fine Fissured, Cortega, Fissured, Optima, Ultima and Cirrus are registered trademarks of Armstrong World Industries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shure Microphone M545SD User Manual
Shure Satellite Radio P4T User Manual
Sony CD Player NW E013 User Manual
Sony MP3 Player SRF M85W User Manual
Sony Speaker XS V1635X User Manual
Sony Stereo Receiver STR DG2100 User Manual
Speco Technologies Car Video System VM15LCD User Manual
SSI America Power Supply EPS2U User Manual
Subaru Robin Power Products Portable Generator RGD2510 User Manual
Sylvania Cordless Telephone ST88245 User Manual