Assembly Manual Cross-Trainer CE
Smooth CE model # 07859-999
Adult Assembly Required.
picture similar
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly Instructions
Please, thoroughly read these instructions prior to assembly and first use. You will get important information about
your safety as well as the use and maintenance of your Cross-Trainer. Keep these instructions for reference and/or for
maintenance work or spare parts orders.
For Your Safety
■ Only use the Cross-Trainer for its intended purpose, i.e. for the
■ To ensure that the safety level is kept to the highest possible
standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.
■ If you have any doubt or any queries, please contact your spe-
cialised dealer.
physical training of adult persons.
■ Any other use is inadmissible and may be dangerous. The ma-
nufacturer cannot be made liable for damage caused by a use
that does not correspond with the intended purpose.
■ You train with an equipment that has been designed in accor-
dance with the latest state of the art regarding safety. Possible
danger spots that may cause injuries have been avoided and
safeguarded as well as possible.
■ The unit requires a power supply of 110 V/60 Hz. It should be
connected only to a safety socket with a single 10-A fuse. Be-
fore commissioning the appliance pay attention to the fact that
the correct plug-in power supply unit (observe marking) has
been connected properly. Do not under any circumstances
carry out electrical repairs or alterations yourself. Always en-
sure that such work is done by a properly qualified electrician.
■ Important: disconnect the apparatus from the mains before
doing repair, maintenance or cleaning work.
■ The equipment must be set up on firm even ground. Ensure that
the power cable is not pinched and that no-one can trip over
it.
■ Improper repairs and design changes (disassembly of original
parts, installation of inadmissible parts, etc.) may cause ha-
zards for the user. Do not under any circumstances carry out el-
ectrical repairs or alterations yourself. Always ensure that such
work is done by a properly qualified electrician.
■ When the unit is not in use, unplug it from the power supply.
■ Never allow liquid of any kind to enter the interior of the unit.
■ Defective parts may impair your safety and the service life of
your equipment. Therefore, please exchange defective or worn
parts immediately.
■ Always observe the general safety rules and precautions for
working with electrical equipment.
■ If the equipment is in regular use, check all its components
thoroughly every 1 -2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the
attachment of grip strap, running plate and fastening of the
handlebar and front tube.
■ Inform present persons (especially children) about possible ha-
zards during your exercises.
■ Prior to taking up training, have your family doctor check
whether your state of health is sufficient to train with this equip-
ment. The medical findings should be the basis for the build-up
or your training program. Wrong or excessive training may
lead to damage to your health.
■ By all means observe the information about the organization of
training in the training instructions.
■ Any interference with parts of the product that are not descri-
bed within the manual may cause damage, or endanger the
person using this machine. Extensive repairs must only be car-
ried out by special service staff or qualified personnel.
■ Our products are subject to a constant innovative quality assu-
rance. We reserve the right to perform technical changes re-
sulting therefrom.
■ In choosing the location of the apparatus, ensure a sufficient sa-
fety distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (paths,
doorways, corridors).
■ The product is not suitable for use by persons weighing over
150 kg.
Handling the equipment
■ Before using the equipment for exercise, check carefully to en-
are put in place with respect to accessibility and supervision.
The appliance may only be operated in public places under
qualified supervision. The scope of such supervision shall de-
pend on who the users are: their degree of reliability, age, ex-
perience, etc.
■ A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling re-
sult from engineering and are absolutely safe.
■ Do not use corrosive or abrasive materials to clean the equip-
ment. Ensure that such materials are not allowed to pollute the
environment.
■ The crosstrainer has a magnetic brake system.
■ The equipment is independent of revolutions per minute.
sure that it has been correctly assembled.
■ Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.
■ It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
■ The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
■ The unit complies with class S of the standard EN 957-1/-2-4.
■ Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.
■ Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
■ The appliance has undergone Class S (= studio) testing. If the
appliance is not intended for domestic use, please note that the
onus is on the owner to ensure that the appropriate measures
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Always wear suitable shoes when using.
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement).
All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive
Instructions for Assembly
Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your dealer.
cause any danger. There is always a
ren play with plastic bags!
risk of suffocation if child-
The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
Bolt all the parts together loosely at ꢀrst, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened ꢀrmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Al-
ways dispose packaging material in such a way that it may not
For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
List of spare parts page 11-12
Example order: Art. no. 07859-999 / spare-part no. 70128679
/ 2 pieces / S/N .................... Please keep original packaging
of this article, so that it may be used for transport at a later date,
if necessary.
Waste Disposal
SMOOTH products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words “with
fastening material“.
Example of label - Serial number
Serial
Number
Trainingsgerat nach DIN
Klasse: HA
DIN EN 957 Teil 1/5
Fur therapeutische Zwecke geignet
Typ 7858-699
368a
Baujahr O-0301
Kontroll Nr. 218
Made in Germany
max. Belastung 150 kg
101
1
2
3
4
5
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Checklist
✓
2
ø42
M5
2
4
2
2
ø25x8,4x3
ø25x8.4x1
1
1
ø25x10.5
4
4
4
ø20x10.5x0.8
M10x105
M5x45
2
4
4
2
M10x25
M5x20
M8x16
4
4
3.9x9.5
ø22.2x27.5
M10
2
2
8
1/1
2/2
1
2
1/1
2/2
1/1
1
1/1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1
IMPORTANT!
Due to technical reasons the screws D have to be tightend first.
Tighten the screws E last.
The screwed connections must be controled at regular
intervals.
!
C
F
A
D
B
E
D
E
4x
ø20x10.5x0.8
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2
2x
ø25x8.4x1
3
ø25x8.4x3
2x
1.
2.
3.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4
B
A
ø25x10.5x 3
ø25x10.5x 3
2x
5
6
a
b
c
4x
8x
ACTUAL SIZE
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7
2x
ACTUAL SIZE
8
4x
ACTUAL SIZE
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling
A
B
For products with power supply: Attention! Only use with original
power unit as supplied, or with original SMOOTH spare part (see
spare part list). Otherwise this may result in damage.
!
!
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
List of spare parts
Crosstrainer CE
07859-999
Pos-
Nr.
1
2
3
4
5
6
7
8
Description
Base Frame
Bearing for Drive Axle 6203-ZZ
Drive Axle 17x114 mm
Speed pick up
Magnetic P/U
Electromagnet
Printed Circuit Board
Cernter sleeve
Cushion Washer (22.2x2x48 mm)
Bearing Washer (25x8.4x1)
Low Wire 2200 mm (Grey)
Adaptor Wire 850 mm
Plug Receptacle (2297)
Housing Plug-In 300 mm
Qty. Spare Parts
1
2
1
1
1
1
1
2
2
2
1
1
1
1
1
4
1
1
1
1
1
1
1
1
2
1
1
2
2
8
2
2
1
1
2
1
4
1
1
1
1
1
1
1
1
1
1
1
1
4
2
2
2
2
1
1
2
2
2
2
2
2
94316747
33100023
11300055
67000786
97200127
94313937
42860011
70128347
97201462
10500038
67000772
42860012
70127365
67000743
94316789
33100031
25635052
91140380
67005127
94313542
94313544
10900091
70128743
70128744
70128679
70128680
70128681
70128424
70128429
10418503
91111287-20
91170500
91170387
91170388
94315158
10900092
33100038
94316750
94316518
10118078
70128563
94316519-20
70128690
67000771
67000421
67000658
70128564
94315684
94315685
33100036
97201447
10118034
70121515
97200256
70128398
70128399
70128590
70128591
70128416
70128417
70133275
10100079
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
115 Volt Power Pack
Idler Pulley w/ Bearings 6300-ZZ
Spring for Belt Tension (4-5279)
Flywheel (2-2192)
Drive Belt 1651 PJ6
Right Drive Disc
Left Drive Disc
Right Drive Disc Shaft 20x120,5 mm
Right Side Main Shroud (3540)
Left Side Main Shroud (3541)
Drive Disc Cap (3543)
Right Lower Mast Cover (3544)
Left Lower Mast Cover
Right Front Ski Cover (3169)
Left Front Ski Cover (3170)
Rivets 6x9, 5 mm
Frame Cross Members (80x33x450)
Floor Levelers (80x33)
Right Transport Castor (80x33)
Left Transport Castor (80x33)
Skis w/ Bearings 2203-2RS
Left Drive Disc Shaft 20x120,5 mm
Ski Pole Bearing 6203-ZZ
Mast
Center Handlebar
Grip for Center Handlebar (27, 5x3x500 mm)
Main Shroud Top Cover (3542)
Computer
Rear Computer Housing (3787)
Top Lead Wire 1.200 mm
Ear Lobe Clip Heart Rate Monitor
Hand Pulse Sensors WP 1007-5C
Mast Cover (3089)
Right Ski Pole w/ Bearings 6200Z, 6203-ZZ, Spacer, & End Cap
Left Ski Pole w/ Bearings 6200-Z, 6203-ZZ, Spacer, & End Cap
Lower Ski Pole Bearing 6200-ZZ
Lower Ski Pole Sleeve 20x4.5x59 mm
Ski Pole Grips (27, 5x3x680 mm)
end cap part 2
Underside Plate for Frame Cross Member (4-6649)
Right Foot Plate (3171)
Left Foot Plate (3172)
Rear Center Ski Pole Pivot Covers w/ Screw Holes (3165
Front Center Ski Pole Pivot Covers (3166)
Rear Bottom Ski Pole Cover (3167)
Front Bottom Ski Pole Cover (3168)
Spacer (3126)
covering cap
11
Download from Www.Somanuals.com. All Manuals Search And Download.
List of spare parts
Crosstrainer CE
07859-999
Pos-
Nr.
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
Description
Qty. Spare Parts
Wavy Washer (A5 DIN 137)
Foot Plate Adjuster Caps M5
Hardware Bags
Water Bottle Holder
Water Bottle
4
4
1
1
1
1
1
1
2
1
1
1
2
5
1
2
2
2
1
2
2
3
1
1
1
10601001
10104000
94316788
70190051
70190041
70128698
70128683
70128682
97201463
70128695
70128492
70128685
10206111
10224072
70128446
34010120
10100171
33100047
17014680
70121514
10709021
10600004
97201470
10709024
07937-000
guide bush
Right Computer Housing Lower Side Cover (3549)
Left Computer Housing Lower Side Cover (3548)
Cushion Washer (22.2x2x27.5 mm)
Plastic Side Insertion Piece for Computer Housing (3551)
Adaptor Ring (3322)
Front Computer Housing (3546)
Bolt (M10x105/17)
Shroud Screws (4x35)
Connector Pin (3295)
Sheet Film Buffer for Cross Member
Computer Housing Lower Side Cover Cap (HAS 2783)
Bearings 2203-2RS
Center Handlebar Plate Attachment
end cap part 1
C Clip 17mm (17 DIN 471)
Plate spring B 31.5 GR 1 X 1.2
distanz sleeve ø22.2x2x5 mm
C Clip 44mm (I 40 DIN 472)
Cardio-Puls-Set
Internetfitness.com
112 Gaither Dr.
Mt. Laurel, NJ 08054
Service tel. 888-800-1167
Sales tel. (888) 211-1611
Download from Www.Somanuals.com. All Manuals Search And Download.
|