Sierra Wireless CRT Television 800TFT User Manual

COLOR MONITOR

SyncMaster 800TFT

(Toshiba Panel)

SERVICE ^Manual

COLOR MONITOR

CONTENTS

1. Precautions

2. Product Specifications

3. Disassembly & Reassembly

4. Alignments & Adjustments

5. Troubleshooting

6. Exploded View & Parts List

7. Electrical Parts List

8. Block Diagram

9. Wiring Diagram

10. Schematic Diagrams

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Precautions

1-2 Servicing Precautions

WARNING:

Caution:

An electrolytic capacitor installed w ith the w rong polarity m ay explode.

Before servicing units covered by this service m anual, read and follow the Safety Precautions

section of this m anual.

Note:

If unforeseen circumstances create conflict between the following servicing precautions and any of the

safety precautions, always follow the safety precautions.

1-2-1 General Servicing Precautions

1. Always unplug the unit’s AC power cord from the

AC power source and disconnect the DC power

jack before attempting to:

4. Check the insulation between the blades of the AC

plug and accessible conductive parts (examples:

metal panels, input terminals and earphone jacks).

(a) remove or reinstall any component or assembly.

(b) disconnect PCB plugs or connectors.

electrolytic capacitor.

5. Insulation Checking Procedure: Disconnect the

power cord from the AC source and turn the power

switch ON. Connect an insulation resistance meter

(500 V) to the blades of the AC plug.

2. Some components are raised above the printed

circuit board for safety. An insulation tube or tape

is sometimes used. The internal wiring is

sometimes clamped to prevent contact with

thermally hot components. Reinstall all such

elements to their original position.

The insulation resistance between each blade of the

AC plug and accessible conductive parts (see

above) should be greater than 1 megohm.

6. Always connect a test instrument’s ground lead to

the instrument chassis ground before connecting the

positive lead; always remove the instrument’s

ground lead last.

3. After servicing, always check that the screws,

components and wiring have been correctly

reinstalled. Make sure that the area around the

serviced part has not been damaged.

1-3 Electrostatically Sensitive Devices (ESD) Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly

called Electrostatically Sensitive Devices (ESD). Examples of typical ESD components are integrated circuits and some

field-effect transistors. The following techniques will reduce the incidence of component damage caused by static

electricity.

1. Immediately before handling any semiconductor

6. Do not remove a replacement ESD from its

protective package until you are ready to install it.

Most replacement ESDs are packaged with leads

that are electrically shorted together by conductive

foam, aluminum foil or other conductive materials.

components or assemblies, drain the electrostatic

charge from your body by touching a known earth

ground. Alternatively, wear a discharging wrist-

strap device. To avoid a shock hazard, be sure to

remove the wrist strap before applying power to

the monitor.

7. Immediately before removing the protective

material from the leads of a replacement ESD,

touch the protective material to the chassis or

circuit assembly into which the device will be

installed.

2. After removing an ESD-equipped assembly, place it

on a conductive surface such as aluminum foil to

prevent accumulation of an electrostatic charge.

3. Do not use freon-propelled chemicals. These can

generate electrical charges sufficient to damage

ESDs.

Caution: Be sure no power is applied to the

chassis or circuit and observe all

other safety precautions.

4. Use only a grounded-tip soldering iron to solder or

desolder ESDs.

8. Minimize body motions when handling

unpackaged replacement ESDs. Motions such as

brushing clothes together, or lifting your foot from

a carpeted floor can generate enough static

electricity to damage an ESD.

5. Use only an anti-static solder removal device. Some

solder removal devices not classified as “anti-static”

can generate electrical charges sufficient to damage

ESDs.

1-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Product Specifications

2-1 Specifications

Item

Description

LCD Panel

TFT-LCD panel, RGB vertical stripe, normally white transmissive,

18-Inch viewable, 0.28 mm pixel pitch

Scanning Frequency

Horizontal : 30 kHz to 81 kHz (Automatic)

Vertical : 56 Hz to 85 Hz (~XGA), 76 Hz (SXGA)

Display Colors

16.7 Million colors

Maximum Resolution

Horizontal : 1280 Pixels @ 81 kHz

Vertical : 1024 Pixels @ 76 Hz

Input Video Signal

Input Sync Signal

Analog, 0.714 Vp-p ± 5% positive at 75 Ω, internally terminated

Type: Seperate H/V sync, Composite H/V, Sync-on-Green

Level: TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V), Sync-on-Green (≤ –0.25 V)

Maximum Pixel Clock rate

135 MHz

Active Display

Horizontal/Vertical

359 ± 3 mm /

287.2 ± 3 mm

AC power voltage & Frequency AC 90 to 264 Volts, 60/50 Hz ± 3 Hz

Power Consumption

Dimensions

54 W (max.), 48W (norminal)

Unit (W x D x H)

Carton (W x D x H)

17.7 x 18.2 x 7.2 Inches (449.4 x 461.2 x 182 mm)

22.4 x 11.6 x 22.8 Inches (570 x 295 x 580 mm)

Weight

(Net/Gross)

8.3 kg (18.28 lbs) / 11.8 kg ( 20.0 lbs)

Environmental Considerations Operating Temperature : 50°F to 104°F (10°C to 35°C)

Humidity : 10 % to 80 %

Storage Temperature

: -68°F to 113°F (-20°C to 45°C)

Humidity : 5 % to 95 %

• SyncMaster 800TFT complies with SWEDAC (MPR II) recommendations for reduced electromagnetic fields.

• Designs and specifications are subject to change without prior notice.

SyncMaster 800TFT

2-1

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Product Specifications

2-2 Pin Assignments

Sync

Type

15-Pin D-Sub & 13W3 Signal Cable Connector

Separate Composite

13W3

Sync-on-green

Red

Pin No.

Red

Green

Blue

Green

Green + H/V Sync

Blue

GND

DDC Return (GND)

GND-R

DDC Return (GND)

GND-R

DDC Return (GND)

GND-R

A1-GND

A2-GND

GND-G

A3-GND

GND-B

3, 8

No Connection

Self Raster

GND

No Connection

Self Raster

GND

No Connection

Self Raster

GND

Bi-Dr Data (SDA)

H-Sync

Bi-Dr Data (SDA)

H/V-Sync

Not Used

DDC Clock (SCL)

Bi-Dr Data (SDA)

Not Used

V-Sync

Not Used

1, 2

DDC Clock (SCL)

2-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Product Specifications

2-3 Timing Chart

This section of the service manual describes the timing that the computer industry recognizes as standard

for computer-generated video signals.

Table 2-1. Timing Chart

Mode

IBM

VESA

VGA2/70 Hz VGA3/60 Hz 640/75 Hz 640/85 Hz 800/75 Hz 800/85 Hz 1024/60Hz 1024/75Hz 1024/85Hz 1280/76Hz 1280/75Hz

720 x 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1024x768 1280x1024 1280x1024

Timing

fH (kHz) 31.469 31.469 37.500 43.269 46.875 53.674 48.363 60.023 68.677 81.129

A µsec 31.777 31.778 26.667 23.111 21.333 18.631 20.677 16.660 14.561 16.640

79.976

12.504

1.067

1.837

9.481

0.119

75.025

13.329

0.038

0.475

12.804

0.013

B µsec

C µsec

3.813

1.589

3.813

1.589

2.032

3.810

1.556

2.222

1.616

3.232

1.138

2.702

2.092

2.462

1.219

2.235

1.016

2.201

6.400

2.880

D µsec 26.058 26.058 20.317 17.778 16.162 14.222 15.754 13.003 10.836

E µsec 0.318 0.318 0.508 1.556 0.323 0.569 0.369 0.203 0.508

3.200

fV (Hz) 70.087 59.940 75.000 85.008 75.000 85.061 60.004 75.029 84.997 76.106

O msec 14.268 16.683 13.333 11.764 13.333 11.756 16.666 13.328 11.765 10.660

P msec

0.064

0.794

0.080

0.427

0.671

0.578

0.064

0.448

0.056

0.503

0.124

0.600

0.050

0.466

0.044

0.524

0.080

3.200

Q msec 0.858

R msec 13.155 15.761 12.800 11.093 12.800 11.179 15.880 12.795 11.183

S msec

0.191

0.064

0.027

0.023

0.021

0.019

0.062

0.017

0.015

0.020

Clock

Freq.

28.322 25.175 31.500

49.500 49.500 56.250 75.000 78.750 94.500 135.000 135.000

(MHz)

Polarity

H.Sync Negative Negative Negative Negative Positive Positive Negative Positive Positive Negative Positive

V.Sync Positive Negative Negative Negative Positive Positive Negative Positive Positive Negative Positive

Remark Separate Separate Separate Separate Separate Separate Separate Separate Separate Com.

Separate

H/V Composite Sync

Separate Sync

VIDEO

Horizontal

Vertical

Horizontal

Video

Sync-on-Green

Sync

Vertical

Green

Horizontal

A : Line time total

C : Back porch

E : Front porch

B : Horizontal sync width

D : Active time

O : Frame time total

Q : Back porch

P : Vertical sync width

R : Active time

S : Front porch

SyncMaster 800TFT

2-3

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Product Specifications

Memo

2-4

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the

SyncMaster 800TFT TFT-LCD monitor.

WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling

these components.

3-1 Disassembly

Cautions:1. Disconnect the monitor from the power source before disassembly.

2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.

7. Disconnect the Function PCB wire (10P)

3-1-1 Removing the Stand

between the Function PCB and the CN102

1. Remove 4 screws on the Stand.

connector on the Main PCB.

8. Disconnect 2 Inverter wires between the Panel

and the CN2, CN3 connectors on the Inverter

PCB.

3-1-2 Main Body Disassembly

1. Remove 4 screws on the Rear Cover.

2. Pull the Rear Cover up and off the monitor.

9. Disconnect the 12P harness between CN1

connectors on the Inverter PCB and CN103

connector on the Main PCB.

3. Remove 4 screws on the BRKT-VESA and

Remove the BRKT-VESA.

10. Carefully lift the Main PCB Assembly and

Inverter PCB and place them on a flat, level

surface that is protected from static electricity.

4. Remove 16 screws on the PCB Shield and

remove the Shield.

5. Remove 7 screws on the Main PCB and 2

screws on the Inverter PCB and 2 screws on

the 10P Harness.

11. Remove 10 screws on the PCB Bracket.

12. Remove the Bracket Assembly from the Front

Cover.

6. Disconnect the connector (140P) between the

Panel and the CN600 connector on the Main

PCB.

13. Remove the 2 screws on the Function PCB

from the Front Cover and remove the

Function PCB and Function Knob.

3-2 Reassembly

Reassembly procedures are in the reverse order of Disassembly procedures.

SyncMaster 800TFT

3-1

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Disassembly and Reassembly

Memo

3-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Alignments and Adjustments

This section of the service manual explains how to use the DDC JIG to adjust the black, red, green, and blue

levels of the FPD when you replace the AD Board, and how to update the microprocessor when you

change the Panel or Lamp(s).

4-1 Required Equipment

The following equipment is necessary for adjusting the monitor:

• Oscilloscope with probe tool

• Computer with Windows 95 , Windows 98 ^R, or Windows NT ^R.

• DV18AS.exe software

• DDC Control JIG

4-2 Using the DDC Control JIG

After replacing the LCD Panel, Lamp(s), and / or AD Board, use the DDC Control JIG to complete your

service. Attach the DDC Control JIG to the flat panel display (FPD) as shown in the diagrams, below.

MONITOR

INTERFACE

BOARD VER. 2.0

INTERFACE

BOARD VER. 2.0

SIGNAL CABLE

3-WIRE CABLE

5V DC

ADAPTOR

5V DC

ADAPTOR

3-WIRE

CABLE

SIGNAL CABLE

PARALLEL CABLE

D-SUB

CONNECTOR

SIGNAL

GENERATOR

Figure 4-1. Setup 1, With Signal Generator

Figure 4-2. Setup 2, Without Signal Generator

SyncMaster 800TFT

4-1

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Alignments and Adjustments

4-2-1 Main Menu

4-2-1 (a) Service JIG : DV18

4-2-2 Sub Menu

4-2-2 (a) Panel Information

Figure 4-3.Service JIG Menu

Figure 4-4. Control JIG Menu

Label

Definition

Label

Definition

Red max value

Green max value

Blue max value

Red min value

Green min value

Blue min value

Color

Shows the red video signal max value

Shows the green video signal max value

Shows the blue video signal max value

Shows the red video signal min value

Shows the green video signal min value

Shows the blue video signal min value

Automatical screen contrast setting

Monitor On Time Total hours that the monitor has been actively

functioning.

Panel Cycle

The total number of times the Panel has been

turned ON.

Time

Total in Hours that this Panel or Lamp has been

ON. Reset this number to 000000 after

replacing the part.

Panel

Total number of hours that this Panel has

been ON.

Auto Adjustment

Red gain control

Adjusts the red video signal gain control

Lamp, Upper Total number of hours that this Upper Lamp

has been ON.

Green gain control Adjusts the green video signal gain control

Blue gain control Adjusts the blue video signal gain control

Lamp, Lower Total number of hours that this Lower Lamp

has been ON.

Red cutoff control Adjusts the red video signal cutoff control

Green cutoff control Adjusts the green video signal cutoff control

Blue cutoff control Adjusts the blue video signal cutoff control

Change No.

The number of times this Panel or Lamp has

been replaced. The numbers are 00 if the item

is the original factory part installed during

manufacture of this monitor.

Panel information

Shows the sub menu to panel information

(4-2-2 (a))

Panel

Replacement times. This value is 00 if original

equipment.

Scroll bar

Changes the value or level of the selected

item. The window to the right shows the

value as it changes.

Lamp, Upper Replacement times. This value is 00 if original

equipment.

SAVE

Saves the current adjustment value of

the R,G,B video contrast gain and

cutoff level

Lamp, Lower Replacement times. This value is 00 if original

equipment.

Message

Read

Shows the message.

Setting

Displays and allows you to adjust the

PC and Control JIG communication

environment. Use this button to change the

Delay parameter and Port Address of

your PC system and to test the connection

between the Control JIG and your computer

Reads all Panel information data from the

AD Board

Write

Writes the Panel Parameter Control values to the

AD Board

Read buffer

Reload the Panel Parameter Control values from

the Program buffer

Exit

Quits the DDC Control JIG

Return Main Returns to the Main menu

4-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Alignments and Adjustments

4-2-3 (c) When Replacing the Panel

4-2-3 Adjustment Procedures

1. Select the Read Buffer button ( ) to gather the

Use the following procedures whenever you

replace the AD Board, Panel, or one or both of the

Lamps.

current information about this monitor.

2. Increment the number by clicking on the (+)

button on the Panel row in the Change No.

column. If they were not already 00, the

numbers for the Upper and Lower Lamps will

automatically change to 00.

4-2-3 (a) When Replacing the AD Board

1. Before replacing the AD Board, read all Panel

information data by using the Read button on

the DDC Control JIG.

3. Check all values. If there is an error, select

Read Buffer again and increment the Change

No. column to the correct number. When all

2. Remove the old AD Board and replace it with

a new board.

values are correct, select the Write button (

to record the data in the firmware.

)

3. Perform the procedures described in section

4-2-3 (b).

4. Select the Return Menu button ( ) to Return

4. Write the Panel information data to the new

AD Board by using the Write button.

Main Menu.

5. Perform other procedures using the DDC

Control JIG, if necessary.

4-2-3 (d) When Replacing the Upper and/or Lower Lamp

6. When all procedures are complete, select the

1. Select the Read Buffer button ( ) to gather

Exit button ( ) to quit the DDC Control JIG

current information about this monitor.

software.

2. Increment the number by clicking on the (+)

button on the Lamp Upper and/ or Lamp

Lower row in the Change No. column.

4-2-3 (b) Color Auto Adjustment

1. After displaying 16-Gray pattern or black and

white mixed pattern, click “Color Auto

Adjustment” button.

3. Check all values. If there is an error, select

Read Buffer again and increment the Change

No. column to the correct number(s). When all

values are correct, select the Write button

2. During normal execution of Auto Algorithm

the screen image may flicker. If Auto

Algorithm does not excute properly, check

DDC Control JIG.

(

) to record the data in the firmware.

4. Select the Return Menu button ( ) to Return

Main Menu.

3. After normal execution of Auto Algorithm,

confirm optimal settings by observing the

contrast of several different patterns on the

display.

4. If you want to check each color value, click the

button from

and from to

SyncMaster 800TFT

4-3

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Alignments and Adjustments

4-3 Using the OSD Service function

After replacement of the LCD Panel or Lamp(s), use the 800TFT’s OSD Service Function to complete your

service.

1. To display the Service Function OSD, push

and hold in for 8 seconds the Left and Right

arrow buttons on the front panel of the

2. If the Panel has been replaced during this

servicing, use the Up or Down arrow button

on the front panel to highlight the Panel row

on the table. Increment the Change No. value

by pushing and holding in (for 8 seconds) the

Left and Right arrow buttons on the front

panel. Incrementing the Panel value

monitor.

Service Function

automatically changes both the Upper and

Lower Lamp Change No. value to 00.

Monitor On Time : 000049Hr

Panel Cycle

: 000088

If you have changed the Upper and/ or Lower

Lamp(s) without changing the Panel, highlight

the appropriate row(s) then push and hold in

(for 5 seconds) both the Left and Right arrow

buttons on the front panel. This action

Time Change No.

Panel

: 000050Hr

Lamp Upper : 000050Hr

Lamp Lower : 000050Hr

increments the Change No. value(s).

Figure 4-5. Service Function Menu Screen

Note: Increment the Lamp value(s) only if one

or both of them were replaced,

but the Lamp was not replaced.

3. After incrementing the appropriate values,

power off the monitor.

4-4

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Alignments and Adjustments

SyncMaster 800TFT

4-5

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Troubleshooting

Notes: 1. Before troubleshooting, set up the PC’s display as below.

• Resolution: 1280 x 1024

• H-frequency: 64 kHz

• V-frequency: 60 Hz

2. If no picture appears, confirm the power cord is correctly connected.

3. Check the following circuits.

• No raster appears: Stand PCB, Main PCB

• 12V develop but no screen: Main PCB

• 12V does not develop: Main PCB

4. If you push and hold the EXIT button for more than 5 seconds, the monitor automatically reverts back

to the factory preset

5-1 No Power

Does proper DC 12 V appear at

DC jack connected to CN101?

Check Power Adaptor.

Yes

Does proper DC 5 V appear at

Pin 4 of IC101?

Check IC101 and related circuit.

Yes

Does proper 5 V - signal appear at

Pin 42 of IC501 (SW_REG_EN)?

Check IC501 and related circuit.

(CN102, Function Key)

Yes

Check Q103, Q105 and Q106.

SyncMaster 800TFT

5-1

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Troubleshooting

5-2 No Video

Check signal cable and connection.

Does the outpus signal appear at RA403 and

R411 of IC406? (LDTGB, LVSYNCB, LHSYNCB,

LCKBB)

Yes

Is the output of Pins 1, 17 of IC501 High ?

Check TFT-LCD panel and Inverter.

Check IC501 and related circuit

Does the analog video signal appear at R211,

R212, R215? (BLUE, GREEN, RED)

(IC201)

Check IC201 and related circuit.

Yes

Check IC201, IC206 and related

circuit.

Does the sync signal appear

at the output of Pin 14 of IC201and Pin 3 of IC 206 ?

(V-SYNC, H V SYNC)

Yes

Does the input signal appear at the Pins 40, 41

Check the related circuit for these

ports.

of IC 300?

(PLL H V MX PDEN)

Yes

During power on-off does the input signal

appear at the Pin 29,30 of IC300?

Check IC501 and related circuit.

(AD SDA, AD SCL)

Yes

Do the clock and sync signal appear at Pin

115, 117 of IC 300?

Check IC 300 and related circuit.

Check IC501 and related circuit.

(DCLKAB, MX_HSYNC) and does the digital video

signal appear at thr output port PDA, PDB)?

Yes

During power on-off dose the input signal

appear at the R 407 and R 408 ?

(MX SDA, MX SCL)

Yes

Check IC 406 and related circuit.

5-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Troubleshooting

WAVEFORMS

CH1 RMS = 3.26V

CH1 RMS = 3.25V

CH1 RMS = 3.12V

CH1 RMS = 2.20V

CH1 RMS = 4.96V

CH1 RMS = 4.42V

CH1 RMS = 3.20V

CH1 RMS = 3.24V

CH1 RMS = 2.50V

CH1 RMS =960mV

SyncMaster 800TFT

5-3

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Troubleshooting

5-3 No OSD

WAVEFORMS

There is video but no OSD.

Does input signal appear

at the Pins 2, 5 and

10 of IC404?

11 12 13

Check IC405 and related circuit.

Check IC404 and related circuit.

CH1 RMS = 4.18V

Yes

While pushing a front control

button does any pulse appear

at Pin 12 of IC404?

Yes

CH1 RMS = 3.26V

Replace IC404.

CH1 RMS = 3.26V

5-4

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Exploded View and Parts List

SyncMaster 800TFT

6-1

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Exploded View & Parts List

6-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Exploded View & Parts List

SyncMaster 800TFT

6-3

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Exploded View & Parts List

Memo

6-4

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

7-1 Main PCB Parts

Loc. No.

Code No.

Description

Specification

“DV18MST,DAVINCH(TSB),-,-”

Remarks

BN91-00013X

2402-000176

2203-000257

2402-001044

2402-001042

2203-005005

2402-001042

2203-000257

2402-001044

2404-001075

2402-001042

2203-005005

2402-001042

2203-005005

2402-000176

2402-001044

2203-000257

2203-005005

2203-000257

2402-000176

2203-000257

2402-000176

2203-001656

2402-000176

2203-000257

2402-000176

2203-005005

2402-000176

2203-000257

2402-000176

PROCESS-DV18MST(TSB)

“C-AL,SMD”

C101

C102

C103

C104

C105

C106

C107

C108

C110

C111

C118

C119

C120

C121

C122

C123

C124

C125

C126

C127

C128

C129

C130

C131

C132

C133

C134

C135

C136

C137

C138

C201

C202

C203

C204

C205

C207

C208

C209

C210

C211

C213

C214

C217

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“10nF,10%,50V,X7R,TP,1608”

“100uF,20%,25V,-,TP,8.3x8.3x6.3”

“100uF,20%,16V,GP,TP,6.6x6.6x5.”

“100nF,10%,16V,X7R,TP,1608”

“100uF,20%,16V,GP,TP,6.6x6.6x5.”

“10nF,10%,50V,X7R,TP,1608”

“100uF,20%,25V,-,TP,8.3x8.3x6.3”

“100UF,20%,16V,GP,TP,7343”

“100uF,20%,16V,GP,TP,6.6x6.6x5.”

“100nF,10%,16V,X7R,TP,1608”

“100uF,20%,16V,GP,TP,6.6x6.6x5.”

“100nF,10%,16V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100uF,20%,25V,-,TP,8.3x8.3x6.3”

“10nF,10%,50V,X7R,TP,1608”

“100nF,10%,16V,X7R,TP,1608”

“10nF,10%,50V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“10nF,10%,50V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“0.47nF,5%,50V,NP0,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“10nF,10%,50V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100nF,10%,16V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“10nF,10%,50V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-TA,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

SyncMaster 800TFT

7-1

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

Specification

“10nF,10%,50V,X7R,TP,1608”

Remarks

C218

C219

C222

C223

C226

C230

C232

C233

C234

C235

C236

C238

C239

C240

C241

C242

C243

C244

C245

C246

C247

C248

C249

C301

C302

C303

C304

C305

C306

C307

C308

C309

C310

C311

C312

C313

C314

C315

C316

C317

C318

C319

C320

C321

C322

C323

C324

2203-000257

2402-000176

2203-000257

2402-000176

2203-005005

2203-001607

2203-000998

2203-001607

2203-005005

2203-001607

2203-000998

2203-001607

2402-000176

2203-001607

2402-000176

2203-000257

2402-000176

2203-005005

“C-CERAMIC,CHIP”

“C-AL,SMD”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“10nF,10%,50V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100nF,10%,16V,X7R,TP,1608”

“0.22nF,5%,50V,NP0,TP,1608”

“0.047nF,5%,50V,NP0,TP,1608”

“0.22nF,5%,50V,NP0,TP,1608”

“100nF,10%,16V,X7R,TP,1608”

“0.22nF,5%,50V,NP0,TP,1608”

“0.047nF,5%,50V,NP0,TP,1608”

“0.22nF,5%,50V,NP0,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“0.22nF,5%,50V,NP0,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“10nF,10%,50V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100nF,10%,16V,X7R,TP,1608”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

7-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

Specification

“100nF,10%,16V,X7R,TP,1608”

Remarks

C325

C326

C327

C328

C329

C330

C332

C333

C334

C335

C354

C355

C356

C357

C401

C402

C403

C404

C405

C406

C407

C408

C409

C410

C411

C412

C413

C414

C415

C416

C417

C418

C419

C420

C421

C422

C424

C425

C426

C427

C428

C429

C430

C431

C432

C433

C434

2203-005005

2203-000257

2203-005221

2203-005005

2402-000176

2203-000384

2203-000257

2203-005005

2402-000176

2203-000384

2203-005005

2402-000176

2203-005005

2203-000280

2402-000176

2203-005005

“C-CERAMIC,CHIP”

“C-AL,SMD”

“100nF,10%,16V,X7R,TP,1608”

“10nF,10%,50V,X7R,TP,1608”

“15nF,10%,50V,X7R,TP,1608,-”

“100nF,10%,16V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“0.015nF,5%,50V,NP0,TP,1608”

“10nF,10%,50V,X7R,TP,1608”

“100nF,10%,16V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“0.015nF,5%,50V,NP0,TP,1608”

“100nF,10%,16V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100nF,10%,16V,X7R,TP,1608”

“0.01nF,0.5pF,50V,NP0,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100nF,10%,16V,X7R,TP,1608”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

SyncMaster 800TFT

7-3

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

Specification

Remarks

C436

C437

C438

C439

C440

C441

C442

C443

C444

C445

C446

C448

C449

C450

C451

C452

C453

C454

C455

C456

C457

C458

C459

C460

C461

C501

C502

C503

C504

C506

C507

C508

C509

C510

C511

C512

C513

C514

C515

C516

C517

C603

C604

C605

C606

C607

C608

2203-000280

2203-005005

2402-000176

2203-005005

2203-000626

2402-000176

2203-000626

2203-005005

2402-000176

2203-005005

2402-001042

2203-005005

2203-000280

2203-000257

2402-000176

2203-000626

2402-000176

2203-000257

2203-000236

2203-000257

2402-000176

2203-005005

2402-001042

2203-000491

2402-000176

2203-000257

“C-CERAMIC,CHIP”

“C-AL,SMD”

“0.01nF,0.5pF,50V,NP0,TP,1608”

“100nF,10%,16V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100nF,10%,16V,X7R,TP,1608”

“0.022nF,5%,50V,NP0,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“0.022nF,5%,50V,NP0,TP,1608”

“100nF,10%,16V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100nF,10%,16V,X7R,TP,1608”

“100uF,20%,16V,GP,TP,6.6x6.6x5.”

“100nF,10%,16V,X7R,TP,1608”

“0.01nF,0.5pF,50V,NP0,TP,1608”

“10nF,10%,50V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“0.022nF,5%,50V,NP0,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“10nF,10%,50V,X7R,TP,1608”

“0.1nF,5%,50V,NP0,TP,1608”

“10nF,10%,50V,X7R,TP,1608”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100nF,10%,16V,X7R,TP,1608”

“100uF,20%,16V,GP,TP,6.6x6.6x5.”

“2.2nF,10%,50V,X7R,TP,1608,-”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“10nF,10%,50V,X7R,TP,1608”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

“C-AL,SMD”

“C-CERAMIC,CHIP”

7-4

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

Specification

“10nF,10%,50V,X7R,TP,1608”

Remarks

C609

2203-000257

2203-000260

2402-000176

2402-001042

2203-005005

2203-000455

2203-005005

2203-000455

2203-005005

2203-000455

2203-005005

2503-001018

BN46-00004Q

“C-CERAMIC,CHIP”

“C-AL,SMD”

C610

“10nF,10%,50V,X7R,TP,1608”

“10nF,10%,50V,X7R,TP,2012”

“10uF,20%,16V,GP,TP,4.3x4.3x5.4”

“100uF,20%,16V,GP,TP,6.6x6.6x5.”

“100nF,10%,16V,X7R,TP,1608”

“1nF,5%,50V,NP0,TP,2012”

“100nF,10%,16V,X7R,TP,1608”

“1nF,5%,50V,NP0,TP,2012”

“100nF,10%,16V,X7R,TP,1608”

“1nF,5%,50V,NP0,TP,2012”

“100nF,10%,16V,X7R,TP,1608”

“15PFX4,10%,50V,-”

C611

C612

C613

C620

C621

“C-AL,SMD”

C622

“C-AL,SMD”

C625

“C-AL,SMD”

C626

“C-CERAMIC,CHIP”

C-NETWORK

C631

C632

C633

C634

C635

C636

C637

C638

C639

C640

C641

C642

CA300

CA301

CA302

CA303

CA304

CA305

CA306

CA307

CA308

CA309

CA310

CA311

CA401

CA402

CA403

CA404

CA405

CA406

CA407

CA408

CA409

CA410

CA411

CA412

CIS

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

C-NETWORK

“15PFX4,10%,50V,-”

“MICOM-S/W,DV18M(TSB)” “DV18M(TSB),-,-”

SyncMaster 800TFT

7-5

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

Specification

Remarks

CN102

CN301

D101

D102

D103

D104

D201

D202

D203

D204

D205

D206

D207

D208

D209

D211

D212

D213

D214

D215

D216

3711-002050

3711-004070

0402-001098

0401-001056

0403-000579

3301-001145

3301-001278

3301-001319

2901-001114

2703-001070

2901-001133

2901-001114

CONNECTOR-HEADER

DIODE-RECTIFIER

“BOX,10P,1R,1.25mm,SMD-A,SN”

“BOX,30P,1R,1.25mm,SMD-A,SN”

“SK34,40V,3.0A,SMC,TP”

DIODE-RECTIFIER

“SK34,40V,3.0A,SMC,TP”

DIODE-SWITCHING

DIODE-ZENER

“MMBD4148SE,75V,600mA,SOT-23,TP”

“BZX84C5V1,5.1V,5%,200mW,SOT-23”

“AB,4.5x1.6x1.6mm,-,-”

D501

FT101

FT102

FT103

FT108

FT109

FT110

FT111

FT112

FT141

FT142

FT143

FT144

FT145

FT146

FT202

FT203

FT204

FT205

FT206

FT301

FT302

FT307

FT401

FT402

CORE-FERRITE BEAD

FILTER-EMI SMD

“AB,4.5x1.6x1.6mm,-,-”

“AB,120ohm,1.6x0.8x0.8mm,200mA,TP,-,0.12ohm”

“AB,300ohm,16x0.8x0.8mm,200mA,TP,-,0.3ohm”

“25VDC,2.0ADC,-,100nF,3.2x1.6x1”

“100uH,10%,4.5x3.2x3.2mm”

FILTER-EMI SMD

INDUCTOR-SMD

“100uH,10%,4.5x3.2x3.2mm”

FILTER-EMI SMD

“25V,0.15A,-,33pF,2x1.25x0.8mm,TP”

“25VDC,2.0ADC,-,100nF,3.2x1.6x1”

FILTER-EMI SMD

7-6

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

Specification

Remarks

FT403

FT404

FT406

FT407

FT408

FT410

FT411

FT412

FT43

2901-001114

2901-001133

2901-001114

1203-001448

1203-001447

1203-001801

1001-001082

0803-000106

0803-000122

0801-002171

0803-000117

0801-002404

1002-001171

1105-001165

BN09-00001A

0801-002237

1003-001243

0903-001063

3704-001071

1103-001164

1103-001163

1203-001109

1205-001686

2703-001778

BN27-20001C

FILTER-EMI SMD

IC-POSI.FIXED REG.

IC-VIDEO SWITCH

IC-TTL

“25VDC,2.0ADC,-,100nF,3.2x1.6x1”

“25V,0.15A,-,33pF,2x1.25x0.8mm,TP”

“25VDC,2.0ADC,-,100nF,3.2x1.6x1”

“2596,TO-263,5P,-,PLASTIC,4.750”

“2596,TO-263,5P,-,PLASTIC,3.135”

FT501

FT502

FT503

FT601

FT602

FT603

FT604

FT605

FT606

FT627

IC101

IC102

IC13

“3300,SOT-23,6P,70MIL,PLASTIC,3.3V,-,-55TO+125C,50MA,-,TP”

“BA7657F,-,SOP,24P,300MIL,SINGL”

IC201

IC204

IC205

IC206

IC207

IC208

IC209

IC300

IC401

IC402

IC403

IC404

IC405

IC406

IC501

IC501_SOCK

IC502

IC503

IC504

IC600

IC601

L101

“74F132,TRIGGER,SOP,14P,150MIL,”

IC-TTL

“74F132,TRIGGER,SOP,14P,150MIL,”

IC-TTL

“74F125,BUFFER,SOP,14P,150MIL,Q”

“74LCX125,BUS BUFFER,SOP,14P,15”

“74F14,INVERTER,SOP,14P,150MIL,”

IC-CMOS LOGIC

IC-TTL

IC-CMOS LOGIC

IC-A/D CONVERTER

IC-DRAM

“74VHC4066,ANALOG SWITCH,SOP,14”

“AD9884,8BIT,QFP,128P,-,1/2LSB,TR,CMOS,PLASTIC,4V,0TO+85C,730MW,-”

“416S1020,512Kx16BITx2,TSOP,50P”

“LCD,MTV121P-31,16P,-”

IC-DRAM

IC-OSD PROCESSOR

IC-CMOS LOGIC

IC-LCD CONTROLLER

IC-MICROCONTROLLER

SOCKET-IC

“74HC04,INVERTER GATE,SOP,5P,49”

“MX88L282FC,QFP,256P,1102MIL,DUAL,-,TR,PLASTIC,-,0TO+70C,1.5W,-,-”

“72E75,8BIT,DIP,42P,600MIL,24MH”

“42P,DIP,SN,1.778mm”

IC-EEPROM

“24LC21A,128X8BIT,SOP,8P,150MIL,-,5V,10%,PLASTIC,0 TO +70C,100UA,CMOS,TP”

“24LC041,512X8BIT,SOP,8P,150MIL,10MS,5V,10%,PLASTIC,-25TO+70C,10UA,CMOS,TP”

“7045,SOT-89,3P,-,PLASTIC,4.3/4”

IC-EEPROM

IC-VOL. DETECTOR

IC-TRANSMITTER

INDUCTOR-SMD

COIL-SMD

“DS90CF383A,TSSOP,56P,240MIL,PALSTIC,4V,1.63W,-10TO+70C,ST,FPD LINK-65MHZ(LVDS)”

“3.3UH,20%,3.2X2.5X2.2MM”

L102

“3.3UH,20%,3.2X2.5X2.2MM”

L103

“3.3UH,20%,3.2X2.5X2.2MM”

L104

SyncMaster 800TFT

7-7

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

Specification

“3.3UH,20%,3.2X2.5X2.2MM”

Remarks

L105

L107

L108

L109

L110

L111

L112

L113

L114

L115

L116

L117

L119

L120

L121

L122

L123

L124

L125

L126

L127

L129

L201

L202

L203

L204

L205

L206

L207

L401

L402

L603

MP1.0

Q101

Q102

Q103

Q105

Q501

Q502

Q503

R101

R102

R103

R104

R105

R106

R107

2703-001778

BN27-20001A

2703-001778

2703-001334

2703-001778

2703-001334

2703-001778

2703-001334

2703-001070

2703-001334

2703-001778

BN41-00031A

0505-001170

0501-002080

2007-000084

2007-000102

2007-000090

2007-000102

2007-000090

2007-000084

2007-000102

INDUCTOR-SMD

COIL-CHOKE

INDUCTOR-SMD

PCB-MAIN

“3.3UH,20%,3.2X2.5X2.2MM”

“1.5uH,10%,2x1.25x0.85mm”

“3.3UH,20%,3.2X2.5X2.2MM”

“1.5uH,10%,2x1.25x0.85mm”

“3.3UH,20%,3.2X2.5X2.2MM”

“1.5uH,10%,2x1.25x0.85mm”

“100uH,10%,4.5x3.2x3.2mm”

“1.5uH,10%,2x1.25x0.85mm”

“3.3UH,20%,3.2X2.5X2.2MM”

“DV18MST,-,-,223*118.9,1.6 T”

“SI9933ADY-T1,P,-20V,3.4A,0.075OHM,2W,SO-8”

“2SC2412K,NPN,200mW,SOT-23,TP,1”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“100Kohm,5%,1/16W,DA,TP,1608”

“10Kohm,5%,1/16W,DA,TP,1608”

“100Kohm,5%,1/16W,DA,TP,1608”

“10Kohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“100Kohm,5%,1/16W,DA,TP,1608”

FET-SILICON

TR-SMALL SIGNAL

R-CHIP

7-8

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

R-CHIP

Specification

Remarks

R108

R201

R202

R203

R204

R205

R206

R207

R208

R209

R211

R212

R214

R215

R216

R217

R218

R219

R227

R229

R233

R234

R237

R238

R240

R241

R242

R247

R249

R250

R255

R256

R257

R258

R259

R260

R261

R263

R265

R301

R302

R303

R304

R305

R306

R307

R310

2007-000090

2007-000113

2007-001167

2007-000113

2007-001167

2007-000107

2007-001167

2007-000113

2007-001167

2007-000074

2007-001167

2007-000113

2007-001167

2007-000113

2007-001167

2007-000116

2007-001114

2007-000070

2007-000074

2007-000118

2007-000070

2007-000118

2007-000070

2007-000074

2007-000080

2007-000090

2007-000074

2007-000070

2007-000113

2007-000239

2007-000118

2007-000071

2007-000090

2007-000071

“10Kohm,5%,1/16W,DA,TP,1608”

“33ohm,5%,1/16W,DA,TP,1608”

“75ohm,5%,1/16W,DA,TP,1608”

“33ohm,5%,1/16W,DA,TP,1608”

“75ohm,5%,1/16W,DA,TP,1608”

“470Kohm,5%,1/16W,DA,TP,1608”

“75ohm,5%,1/16W,DA,TP,1608”

“33ohm,5%,1/16W,DA,TP,1608”

“75ohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“75ohm,5%,1/16W,DA,TP,1608”

“33ohm,5%,1/16W,DA,TP,1608”

“75ohm,5%,1/16W,DA,TP,1608”

“33ohm,5%,1/16W,DA,TP,1608”

“75ohm,5%,1/16W,DA,TP,1608”

“120ohm,5%,1/16W,DA,TP,1608”

“680Kohm,5%,1/16W,DA,TP,1608”

“0ohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“390ohm,5%,1/16W,DA,TP,1608”

“0ohm,5%,1/16W,DA,TP,1608”

“390ohm,5%,1/16W,DA,TP,1608”

“0ohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“2Kohm,5%,1/16W,DA,TP,1608”

“10Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“0ohm,5%,1/16W,DA,TP,1608”

“33ohm,5%,1/16W,DA,TP,1608”

“1.5Kohm,1%,1/16W,DA,TP,1608”

“390ohm,5%,1/16W,DA,TP,1608”

“22ohm,5%,1/16W,DA,TP,1608”

“10Kohm,5%,1/16W,DA,TP,1608”

“22ohm,5%,1/16W,DA,TP,1608”

R-CHIP

SyncMaster 800TFT

7-9

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

R-CHIP

Specification

Remarks

R311

R312

R313

R316

R317

R343

R401

R402

R403

R404

R405

R406

R407

R408

R409

R410

R411

R412

R413

R414

R415

R416

R417

R418

R419

R421

R422

R427

R430

R501

R502

R503

R504

R505

R506

R507

R508

R509

R510

R511

R512

R513

R514

R515

R516

R517

R518

2007-000071

2007-000080

2007-000090

2007-000074

2007-000090

2007-000074

2007-000071

2007-000084

2007-001002

2007-000084

2007-000071

2007-000084

2007-000074

2007-000071

2007-000109

2007-000074

2007-000071

2007-000070

2007-000090

2007-000074

2007-000084

2007-000078

2007-000074

2007-000084

“22ohm,5%,1/16W,DA,TP,1608”

“2Kohm,5%,1/16W,DA,TP,1608”

“10Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“10Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“22ohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“510ohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“22ohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“22ohm,5%,1/16W,DA,TP,1608”

“1Mohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“22ohm,5%,1/16W,DA,TP,1608”

“0ohm,5%,1/16W,DA,TP,1608”

“10Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“1Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

R-CHIP

7-10

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

R-CHIP

Specification

Remarks

R519

R520

R521

R522

R523

R524

R525

R526

R527

R528

R529

R530

R531

R532

R533

R534

R535

R536

R537

R538

R539

R540

R541

R542

R543

R544

R545

R546

R547

R548

R549

R550

R551

R552

R553

R554

R555

R556

R557

R558

R560

R561

R601

R602

R603

R604

R605

2007-000074

2007-000084

2007-000074

2007-000077

2007-000074

2007-000076

2007-000077

2007-000074

2007-000076

2007-000078

2007-000074

2007-000077

2007-000078

2007-000074

2007-000092

2007-000074

2007-000109

2007-000075

2007-000078

2007-000077

2007-000074

2007-000084

2007-000074

2007-000071

2007-000102

2007-000077

2007-000070

2007-000084

2007-000070

2007-000084

2007-000070

“100ohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“470ohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“330ohm,5%,1/16W,DA,TP,1608”

“470ohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“330ohm,5%,1/16W,DA,TP,1608”

“1Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“470ohm,5%,1/16W,DA,TP,1608”

“1Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“15Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“1Mohm,5%,1/16W,DA,TP,1608”

“220ohm,5%,1/16W,DA,TP,1608”

“1Kohm,5%,1/16W,DA,TP,1608”

“470ohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“22ohm,5%,1/16W,DA,TP,1608”

“100Kohm,5%,1/16W,DA,TP,1608”

“470ohm,5%,1/16W,DA,TP,1608”

“0ohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“0ohm,5%,1/16W,DA,TP,1608”

“4.7Kohm,5%,1/16W,DA,TP,1608”

“0ohm,5%,1/16W,DA,TP,1608”

R-CHIP

SyncMaster 800TFT

7-11

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

R-CHIP

Specification

Remarks

R606

2007-000084

2007-000074

2007-000072

2007-000458

2007-000092

2011-000002

“4.7Kohm,5%,1/16W,DA,TP,1608”

“100ohm,5%,1/16W,DA,TP,1608”

“47ohm,5%,1/16W,DA,TP,1608”

“18Kohm,5%,1/16W,DA,TP,1608”

“15Kohm,5%,1/16W,DA,TP,1608”

“22ohm,5%,63mW,L,CHIP,8P,TP”

R607

R-CHIP

R609

R-CHIP

R610

R-CHIP

R611

R-CHIP

R612

R-CHIP

R613

R-CHIP

R614

R-CHIP

R615

R-CHIP

R616

R-CHIP

R617

R-CHIP

R618

R-CHIP

R619

R-CHIP

R620

R-CHIP

R621

R-CHIP

R622

R-CHIP

R623

R-CHIP

R624

R-CHIP

R625

R-CHIP

R626

R-CHIP

R627

R-CHIP

R628

R-CHIP

R630

R-CHIP

R631

R-CHIP

RA301

RA302

RA303

RA304

RA305

RA306

RA307

RA308

RA309

RA310

RA311

RA312

RA401

RA402

RA403

RA404

RA405

RA406

RA407

RA408

RA409

RA410

RA411

R-NETWORK

7-12

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Electrical Parts List

Loc. No.

Code No.

Description

R-NETWORK

Specification

Remarks

RA412

RA413

RA414

RA415

RA416

RA417

RA418

2011-000002

2703-001778

2203-005005

2901-001114

1204-001551

2801-003667

2801-003326

“22ohm,5%,63mW,L,CHIP,8P,TP”

“3.3UH,20%,3.2X2.5X2.2MM”

“100nF,10%,16V,X7R,TP,1608”

“25VDC,2.0ADC,-,100nF,3.2x1.6x1”

R-NETWORK

INDUCTOR-SMD

“C-CERAMIC,CHIP”

FILTER-EMI SMD

IC-VIDEO SYSTEM

CRYSTAL-SMD

“GS1881,SOIC,8P,150MIL,PLASTIC,13.2V,-,0TO+70C,TP,VIDEO SYNC SEPARATOR”

“14.3182MHZ,50PPM,28-AAN,16,50OHM,TP”

“24MHz,30ppm,28-ABX,16pF,50ohm,”

X401

X501

SyncMaster 800TFT

7-13

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Block Diagram

SyncMaster 800TFT

8-1

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Block Diagrams

Memo

8-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

9 Wiring Diagram

RED

GREEN

BLUE

CN201

CN101

GND

Signal Cable

GND

INVERTER

12V_BL

GND

BL_CNT

BL_ON

12V_BL

GND

SELF_TEST

GND

DDC_DATA

H_SYNC

V_SYNC

DDC_CLK

CN103

CN1

GND

BL_CNT

BL_ON

RED & R_GND

GREEN&G_GND A2

MAIN PCB

BLUE & B_GND

DDC_CLK

13W3 CABLE

CN202

GND

H_SYNC

DDC_DATA

V_SYNC

SELF_TEST

KEY1

KEY2

LED_G

LED_R

GND

KEY +5V

+5V

GND

CN2

CN102

KEY2

LED_G

LED_R

GND

KEY +5V

+5V

GND

13W3_LED

D_SUB_LED

FUNC PCB

13W3_LED

D_SUB_LED

CN301

SyncMaster 800TFT

9-1

Download from Www.Somanuals.com. All Manuals Search And Download.

9 Wiring Diagram

Memo

9-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-1 Signal input Part Schematic Diagram

CH1 RMS = 4.42V

CH1 RMS = 4.96V

10-1

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-2 Scaler Chip Part Schematic Diagram

CH1 RMS = 3.25V

CH1 RMS = 3.26V

CH1 RMS = 2.20V

CH1 RMS = 3.12V

CH1 RMS = 3.26V

CH1 RMS = 4.18V

CH1 RMS = 3.26V

SyncMaster 800TFT

10-2

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-3 Power input Part & LCD panel interface part Schematic Diagram

10-3

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-4 Micom Part Schematic Diagram

SyncMaster 800TFT

10-4

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-5 A/D converter Part Schematic Diagram

CH1 RMS = 3.20V

CH1 RMS = 3.24V

CH1 RMS = 3.20V

CH1 RMS = 3.24V

10-5

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

Samsung Electronics Co., Ltd. May 2000

Printed in Korea

P/N : BN68-00049R-01

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Exploded View and Parts List

SyncMaster 800TFT

6-1

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Exploded View & Parts List

6-2

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Exploded View & Parts List

SyncMaster 800TFT

6-3

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Exploded View & Parts List

Memo

6-4

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-1 Signal input Part Schematic Diagram

CH1 RMS = 4.42V

CH1 RMS = 4.96V

10-1

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-2 Scaler Chip Part Schematic Diagram

CH1 RMS = 3.25V

CH1 RMS = 3.26V

CH1 RMS = 2.20V

CH1 RMS = 3.12V

CH1 RMS = 3.26V

CH1 RMS = 4.18V

CH1 RMS = 3.26V

SyncMaster 800TFT

10-2

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-3 Power input Part & LCD panel interface part Schematic Diagram

10-3

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-4 Micom Part Schematic Diagram

SyncMaster 800TFT

10-4

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Schematic Diagrams

10-5 A/D converter Part Schematic Diagram

CH1 RMS = 3.20V

CH1 RMS = 3.24V

CH1 RMS = 3.20V

CH1 RMS = 3.24V

10-5

SyncMaster 800TFT

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharp Camcorder VL AH 50 H User Manual
Silvercrest Microwave Oven SMW 900 EDS A16 User Manual
Sony Blu ray Player BDP S390 User Manual
Sony Laptop PCG R600 MX User Manual
Spalding Fitness Equipment M88604C1 User Manual
Speco Technologies Security Camera HT 7816DNV User Manual
Standard Horizon Marine GPS System CPV350 User Manual
Sunbeam Hot Beverage Maker KE5300 User Manual
Sunfire Speaker SDS10 User Manual
Sylvania CRT Television C6432TE User Manual