FLAGSHIP
Luxury Scooter
Model: TE-889XLSN
User Manual
7/3/2006
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Congratulations on your purchase of the Shoprider® Flagship ™ scooter. The Flagship
™ scooter is the ultimate combination of style, comfort and ease of use. The freedom
that the Flagship ™ scooter offers, allows you the liberty of mobility, rain or shine. Direct
drive transaxles, automatic electromagnetic brake and easy hand controls give a safe
and efficient ride. We know that the Flagship ™ will provide many years of pleasure for
you.
Please ensure that you read this manual carefully, it is important for your safety
that you understand the guidelines and instructions given.
Flagship Features (Figure 1)
1. Delta tiller control head
7
1
10
2. Head lights and indicators
3. Rear lights and indicators
4. Hood w/ charging port & wiper fluid
5. Swivel and sliding seat
6. Reclining seat adjustment
7. Reclining captain’s seat
8. Foot rest
6
4
3
9
2
9. Tiller steering column and steering
wheel angle adjustment
5
10. Windshield wiper
8
Figure 1
7/3/2006
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY ADVICE
• DO NOT carry passengers.
• DO NOT exceed inclines over 10 degrees (17% grade).
• DO NOT turn on steep inclines.
• DO NOT turn suddenly at high speeds.
• DO NOT get on or off the scooter unless the brake is on and the scooter is switched
off.
• DO NOT switch off the scooter while the scooter is moving.
• DO NOT drive the scooter where you can not safely or legally walk.
• DO NOT attempt to drive over high curbs. Doing so could cause your scooter to turn
over, causing injury or damage to the scooter.
• DO NOT drink or use a mobile phone when driving your scooter.
• DO NOT exceed the suggested user weight limit. Doing so, could cause personal
injury and invalidate the warranty.
• ALWAYS keep your feet on the scooter when moving.
• Consult your doctor if there is any doubt about your ability to use a scooter safely.
• ALWAYS slow down and proceed carefully when traveling over rough or uneven
ground.
• For individuals with balance problems practice getting on the scooter with assistance
of a qualified healthcare professional.
• DO NOT use an escalator to move a scooter. Serious injury could occur.
• DO NOT drive the scooter on an incline that has oil, water or ice film on it.
• DO NOT try to lift the scooter by its seat, tiller, or any removable parts. Any of these
could cause injury to the user or damage to the scooter.
• DO NOT use parts or accessories that are not authorized by Shoprider®.
• Before sitting in or exiting the scooter, REMOVE the key from the ignition. This will
insure the POWER is off and the scooter can not move under its own power.
• As a general precaution, always remove the key from the ignition while the scooter is
not in use. This will prevent use by untrained and unauthorized persons.
• DO NOT connect any medical device to the scooter battery. This could cause failure
of the device, the scooter and personal injury.
• Make sure the tiller is properly adjusted to the user or damage and injury could result.
• DO NOT transport in a vehicle WHILE seated on the scooter. Shoprider® will not be
responsible for any injury or damage that might result.
• For maximum battery life, make sure to fully charge batteries for up to 12 hours prior
to first use.
7/3/2006
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
EMI WARNING
Shoprider® Flagship ™ may be susceptible to electromagnetic interference (EMI),
which is a kind of interfering electromagnetic energy (EM) emitted from sources such as
radio stations, TV stations, amateur radio (HAM) transmitters, two-way radio, and
cellular phones. The interference (from radio wave sources) can cause the scooter to
release its brakes, move by itself, or move in unintended directions. It can also
permanently damage the scooter’s control system.
The sources of radiated EMI can be broadly classified into three types:
1. Hand-held portable transceivers (transmitters-receivers) with the antenna mounted
directly on the transmitting unit. Examples include: citizens band (CB) radios,
“walkie talkie”, security, fire and police transceivers, cellular telephones, and other
personal communication devices.
NOTE! Some cellular telephones and similar devices transmit signals while they
are ON, even when not being used.
2. Medium-range mobile transceivers, such as those used in police cars, fire trucks,
ambulances, and taxis. These usually have the antenna mounted on the outside of
the vehicle.
3. Long-range transmitters and transceivers, such as commercial broadcast
transmitters (radio and TV broadcast antenna towers) and amateur (HAM) radios.
NOTE! Other types of hand-held devices, such as cordless phones, laptop
computers, AM/FM radios, TV sets, CD players, and cassette players, and small
appliances, such as electric shavers and hair dryers, so far as we know, are not
likely to cause problems to the scooter.
Scooter Electromagnetic Interference (EMI)
Because EM energy rapidly becomes more intense as one moves closer to the
transmitting antenna (source), the EM fields from hand-held radio sources (transceivers)
are of special concern. It is possible to unintentionally bring high levels of EM energy
very close to the scooter’s control system while using these devices. This can affect
scooter movement and braking.
Therefore, the warnings listed below are
recommended to prevent possible interference with the control system of the scooter.
7/3/2006
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS
1. Do not operate hand-held transceivers (transmitters-receivers), such as citizens
band (CB) radios, or turn ON personal communication devices, such as cellular
phones, while the scooter is turned ON.
2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid
coming close to them.
3. If unintended movement or brake release occurs, turn the scooter OFF as soon as it
is safe.
4. Be aware that adding accessories or components, or modifying the scooter may
make it more susceptible to EMI.
NOTE! There is no easy way to evaluate the overall immunity of the scooter.
5. Report all incidents of unintended movement or braking to your Shoprider® provider,
and note whether there are sources of EMI nearby.
WARNING! Shoprider® is not responsible for damage or injury incurred due to
improper and unsafe use of our scooter.
7/3/2006
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS
Tiller Angle Adjustment (Fig 2)
On the left hand side at the base of the
tiller is a red lever. Push the lever to
release the pin and select the desired
tiller angle. Refit the pin into one of
the three location holes to lock tiller in
place.
Tiller Angle
Adjustment
Knob
Figure 2
Folding the Tiller
Fold down the tiller by pushing the lever to release the pin (fig 2).
Seat Removal
Turn the seat hand knob under the base of the seat counterclockwise to loosen. Lift the
seat off the seat post.
Seat Slide Adjustment
Lift red lever located under seat & slide seat to desired position. Release lever & seat
will lock into position.
7/3/2006
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SCOOTER TILLER CONTROLS (FIG 3)
Speed
Controls
Battery
Level
Speed Controls
Speed
High/Low
Switch
The speed control allows you to set
a speed between 1 (minimum) and
10 (maximum). There is also a
high/low switch giving you a total of
20 speed settings..
Indicator
Indicator
Switch
Hazard
Lights
Finger
Lights
Lever
Control
Battery Level Indicator
The number of red bars shows the
amount of charge left in your batteries.
The amount of charge will only show
at its true level when the scooter is in
drive.
Key
Switch
Horn
Caution – Do not allow the battery
Figure 2
level
indicator
to
go
down
completely as complete discharge
of the batteries could cause irreversible damage.
Horn
A yellow button at the rear of the tiller operates the horn.
Hand Lever Controls
The right hand lever controls the forward motion and the left hand lever controls the reverse
motion. The amount of pressure applied to each lever will determine the speed the scooter
travels, up to the speed designated with the speed dial. Release the lever and the scooter
will automatically come to a stop as the electromagnetic brake is applied to the motor.
On/Off Key Switch
Insert the key in the right side of the tiller. Turn the key and the battery light indicator will
light up. There may be a slight delay before the hand lever control can be operated, while
the controller checks the circuits.
Electromagnetic Brake
The brake is automatically operated when the control levers are pressed or released.
There is a slight delay when the scooter decelerates; this allows the scooter to come to a
smooth stop.
7/3/2006
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE/FREEWHEEL OPERATION (FIG 3)
The drive/freewheel lever is located next to the right rear wheel, under rear bumper. This
lever allows you to put the scooter in freewheel (neutral) and push the scooter. To push the
scooter while turned off, lift the lever in the up position (the scooter is now in freewheel).
To put the scooter into drive (in gear); put the lever in the down position (now the unit may
be driven).
Note: The scooter will not operate when the lever is up (in neutral). If the scooter is turned
on while the lever is up, you must turn the scooter off, put the lever in the down position,
and then turn the scooter back on.
WARNING! For safety, always put the scooter into gear (lever down) after pushing
or rolling scooter. Failure to do so may result in injury.
Shoprider® is not responsible for damage or injury incurred due to improper or
misuse of the scooter.
Freewheel
Release
Lever
Scooter
Serial
Number
Anti-tip
Wheels
Figure 3
7/3/2006
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
STARTING TO DRIVE YOUR SCOOTER
First Time Use
Prior to using your Shoprider® Flagship ™ scooter for the first time, you must charge the
batteries fully (refer to Battery Charging Procedures). Charging may take up to 12 hours.
Charging the batteries completely prior to first time use will benefit battery efficiency and
extend battery life. Failure to do so may cause damage.
Getting Started
• Select a level area with plenty of space.
• Mount the scooter by pushing the arm rest upward out of the way and sliding onto the
seat.
• Adjust the tiller and seat as previously described.
Starting Scooter Movement
• Ensure that you are seated in a comfortable position.
• Turn the key to the on position.
• Your speed setting should be on 1 or 2.
• Squeeze your right hand lever and the scooter will move forward slowly. The harder
you squeeze, the faster the scooter goes but will only reach the speed level that has
been selected.
• Release the lever and the scooter will slowly come to a stop as the magnetic brake
automatically engages.
Steering
Steering the scooter is light and easy. When starting off ensure that you give a wide
clearance when turning so that the rear wheels clear any obstacle that you are passing.
When steering through limited spaces such as a doorway or when turning around, turn the
tiller handles where you want to go and apply power gently. The scooter will turn very
tightly, but will still move with complete stability as long as the speed is not too high.
Reversing
Before reversing ensure that the area behind is free from any hazards or obstructions.
Adjust your speed setting to a low setting before you move in reverse. Squeeze the left
hand lever, and steer wide of all corners and obstacles.
Dismounting
Before dismounting ensure that the key is turned to the off position. Dismount either sliding
off the seat or swivel the seat 90° turn.
CAUTION: Please ensure that care is exercised when mounting or dismounting the
scooter and that the tiller, seat back and foot rest are not used for support.
7/3/2006
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTRA GUIDELINES IN THE CONTROL OF YOUR SCOOTER
Ramps
The stability of your scooter is governed by several factors such as the seating position, the
angle of the slope and your height and weight. When approaching an incline, do so directly
and not at an angle and where ever possible avoid making turns. When going down a
ramp or slope keep the speed settings to slow. This will ensure there is a safe controlled
descent. When the hand levers are released the scooter will slowly stop.
Caution - Do not turn off the control key while the unit is in motion
Grass and Gravel
Please follow the guidelines given previously and your scooter will perform admirably over
many surfaces. Avoid driving in tall grass, sandy beach, etc.
NOTE: Although the scooter is weatherproof, it is not recommended to soak the
scooter.
7/3/2006
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERIES AND BATTERY CHARGING
The Shoprider® Flagship ™ scooter must be equipped with two maintenance-free, sealed
lead acid or gel batteries. The batteries are installed underneath the seat and rear chassis
cover. Battery life and performance may be affected by temperature, terrain, condition of
battery, the weight of the user, and care of batteries. The battery level indicator is only a
guide and is most effective when the scooter is moving, only then is the true discharge level
displayed.
• When the scooter stops the battery level indicator may indicate full.
• An active user can use up to 30% of battery capacity or more per day.
• Inactive users may only use 50% of battery capacity in a week.
• In both these instances the battery should be put on charge over night.
Keeping the batteries charged will extend the life of the batteries
Battery Charger (Fig 4)
1) The battery charger is an off-board 8-amp
1
transformer type.
2) Charger A/C power cord.
2
First Time Use
Prior to using your Shoprider® Flagship ™ scooter for the
first time, you must charge the batteries fully (refer to
Battery Charging Procedures). Complete charging may
Figure 4
take up to 12 hours. Charging the batteries completely
prior to first time use will benefit battery efficiency and
extend battery life. Failure to do so may cause damage.
Charging
The Shoprider® Flagship ™ scooter has a built in 3-pin charger port located on the right
side of the tiller next to the key switch. To charge the batteries connect the 3-pin male plug
lead into the 3-pin female battery-charging socket on the tiller. Plug the charger A/C cord
plug into the wall socket. The battery charger has two indicator lights. The red light shows
the power is on. The second light shows yellow/gold while charging, and when the light
turns green the batteries are fully charged. Once the batteries are completely charged,
unplug the A/C cord from the wall then unplug the 3-pin lead from the charger port.
WARNING: Only use the original Shoprider approved charger!
This charger is for indoor use only. DO NOT expose it to rain or water spray.
Do not leave the charger plugged into the charger port if the charger is not charging.
7/3/2006
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Tires
It is good practice to keep your tires inflated properly (30psi) at all times. Failure to do so
will result in excessive load on batteries, poor driving performance and may cause damage
or injury.
General Maintenance and Lubrication
• Inspection for loose wheel bolts, tiller base bolts, seat tightening bolt, and other nuts
and bolts is recommended on a regular basis.
• Most lubricated components on the Shoprider® Flagship ™ scooter are designed to be
maintenance free and are sealed. Therefore lubrication is not required for these
components. However, the driving axles and seat post should always have a very light coat
of multipurpose grease.
DO NOT USE TOO MUCH GREASE!
• It is recommended that the driving axles (inside the drive wheel assembly) be checked
and cleaned periodically for hair and debris build-up, which may hinder the performance of
the unit.
• Check the batteries on a regular basis. For extended battery life, it is highly
recommended that the batteries be fully charged after each use. If the batteries are weak,
severely discharged or old, a variety of problems may occur with the unit including charging
problems, reduced speed, loss of range, and others. Please contact your local Shoprider®
provider for battery replacement.
TROUBLESHOOTING GUIDE
Circuit Breaker
Your scooter is fitted with the latest in electronic controls that are programmed to protect
the electrical system from abnormal overloads. Provided for extra protection is a circuit
breaker toggle switch, located under the seat. Should there be a situation where your
scooter stops for no apparent reason, please check that the circuit breaker has not tripped.
Check List
If your scooter fails to operate, please check the following:
• Unit is switched on.
• Drive/Freewheel mechanism is in the drive position (pushed down).
• All plugs and connectors are clean and firmly connected.
• Battery level shows full charge.
• Battery fuses are not blown.
If the free wheel device has been operated with the scooter switched on, then the scooter
will not operate until the ignition key has been switched off and then on again.
Please consult your dealer if your scooter does not run after checking these points.
7/3/2006
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
UNIT SPECIFICATIONS
Flagship™
Overall Dimensions: L1 x W x H
in
63”x 29”x 64”
Front
Rear
2 , 12”
2 , 12”
Number, Size of Tires
Suggested User Weight
(on the level road)
lb
Max. 350
Total Weight (w/ batteries, basket, seat)
lb
lb
328
Each Battery Module Weight (12v-75amp x2)
57 x2
_V_Ah
x Pcs
Off
Battery Module Capacity
Charger-24v
12V36/50/75Ah x 2
8amp
Board
Output Power of Motor
Maximum Speed2
Hp
2
7
mph
Maximum Climbing Angle (based on user
weight of 90kg/200lb) /Safe Climbing Angle
% ( º )
15 (9)*
Range3 (per charge w/ STD 75Ah Battery)
(After the battery and mechanical moving
parts fully break in)
mile
31
Turning Radius
Ground Clearance
Handle Bar
in
in
70
N/A
Delta
Y
Type
Y/N
Suspension
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
1. Driver weight may exceed weight of the unit; speed must be reduced when turning.
2. The actual driving range varies with the factors shown below:
a) the weight of occupant
b) ground surface
c) battery conditions
d) type of charger
e) ambient temperature
f) the method of driving
g) terrain
7/3/2006
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
QUARTERLY INSPECTION
For your own safety, quarterly inspection and service on the product has to be performed
and signed by an authorized provider. Maintenance records (below) should be kept at all
times. The manufacturer / distributor / vendor will be indemnified from any product liability
claim if the above maintenance / service requirement is not met.
NOTE! Regular (Monthly) inspection is strongly recommended by the manufacturer
to ensure ultimate performance of the vehicle.
Service Record:
Date of Purchase:
/
/
Purchaser:____________________________________________________
Model #: TE-889XLSN Flagship™ Serial #:
____________________________
Provider Unit Was Purchased From: _______________________________
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
M / D / Y
7/3/2006
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Please refer to warranty information included with unit.
DISCLAIMER
Congratulations on your purchase of the Shoprider® Flagship ™ scooter.
It is not intended to be used by individuals with physical limitations that could prevent
the user from operating this unit safely. Shoprider® disclaims all responsibility for any
personal injury or property damage, which may occur as a result of improper or unsafe
use of its products. Mechanical or electrical defects will be dealt with on a contingency
liability basis.
The preceding guidelines are intended to assist you in the safe operation of your
GolfRider™ scooter. If you should have any questions about the correct operation of
your scooter, please contact your authorized Shoprider® provider.
Model No. TE-889XLSN
Serial No.
Provider’s Stamp
7/3/2006
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|