• User Manual •
SC3112
Caller ID Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
SC3112 User Guide
TABLE OF CONTENT
PRODUCT OVERVIEW.....................................................................................3
1. INSTALLING OR REPLACING THE BATTERY .........................................................4
2. SWITCH OPERATION...................................................................................4
RINGER HI/LO Switch.................................................................................4
HANDSFREE Volume Slider ...........................................................................4
3. SOFTWARE SETTING ..................................................................................4
4. FUNCTION KEY OPERATION ..........................................................................6
UP and DOWN key.....................................................................................6
CHECK key..............................................................................................6
DELETE key.............................................................................................6
PAUSE key ..............................................................................................6
SPEED DIAL Memory key (SAVE) .....................................................................6
SPEED DIAL Memory key (CALL) .....................................................................6
FLASH key (600ms)....................................................................................7
REDIAL key .............................................................................................7
CALLBACK key .........................................................................................7
HANDSFREE (HF) key..................................................................................7
5. ADDITIONAL NOTES ...................................................................................7
INCOMING CALL LCD INDICATOR.....................................................................7
RING / INCOMING CALL LED INDICATOR ............................................................7
IN USE LED INDICATOR ................................................................................7
LCD BACKLIGHT FUNCTION ..........................................................................7
TROUBLESHOOTING GUIDE..............................................................................7
DECLARATION OF CONFORMITY ........................................................................8
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SC3112 User Guide
PRODUCT OVERVIEW
21
22
20
19
18
1
2
17
16
3
4
5
15
6
7
8
9
10
11
12
13
14
Description:
1. LCD display
2. DOWN key
16. M1 key
17. RING LED indicator
18. CHECK key
3. MEMO key
4. DELETE key
5. IN USE LED indicator
6. M3 key
19. PAUSE key
20. UP key
21. Tel line jack
22. RINGER HI/LO switch
7. M2 key
8. 0-9/#/* key
9. HANDSFREE VOLUME slider
10. FLASH key
11. SET key
12. REDIAL key
13. HANDSFREE key
14. CALLBACK key
15. Handset Cord jack
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SC3112 User Guide
1. INSTALLING OR REPLACING THE BATTERY
Install 2 Alkaline AAA batteries into the battery compartment and re-fit the cover before use.
IMPORTANT—before removing the battery compartment cover, ensure the base unit
is disconnected from the telephone line.
Connection and conditions for use
You can connect your SC3112, to public networks in the United Kingdom or to an
approved PBX using DTMF signaling. Each item of telephone equipment (phones, fax
machines, etc.) has a ringer equivalence numbers (REN). The RENs of all
equipment connected to an exchange line must not add up to more than 4
otherwise, one or more phones may not ring and/or answer calls correctly.
SC3112 has a REN of 1, and most other telephones have a REN of 1 unless marked
otherwise.
2. SWITCH OPERATION
RINGER HI/LO Switch
Select your preferred ringer volume either HI or LO. The selection is at the back of the
telephone.
HANDSFREE Volume Slider
Select your preferred Handsfree volume through the adjustment slider located at the side of
the telephone.
3. SOFTWARE SETTING
In on-hook position, press SET key to begin settings. You would see the LCD panel display
SE12345678 flashing. Press UP/DOWN or number key to change the settings. To set each
item, press SET key. To exit menu, press SET key.
SET ITEM
OPERATIONS
DATE/TIME
Press SET key. Press 1 to display 1-dATE 2-CL.
Press 1 to set the date. The year, month and date will be flashing on
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SC3112 User Guide
the LCD. Press number key to input the date. Once done, press SET key.
OR
Press 2 to set the time. The hour and minute will be flashing on the
LCD. Press number key to input the time. Once done, press SET key.
To exit press HANDSFREE key.
ALARM
Press SET key. Press 3 to display AL 1-2-3 on the LCD. Press 1, 2 or 3 to
set the alarm. Press the UP key to select the time. Once done, press
Set key.
FLASH or
Press SET key. Press 5 to display 1-F 2-PT on the LCD. Press 1 or 2 to
PULSE/TONE
set Flash time or Pulse/Tone function.
For Flash time function:
Select 1 then press UP/DOWN key to choose flash time. Once
done, press SET key.
For PULSE/TONE function:
Select 2 then press UP/DOWN key to choose flash time. Once done,
press SET key.
To exit press HF key.
LOCAL CODE
Or
Press SET key. Then press 6 key to display 1-LOC 2-0L on the LCD. Press
1 or 2 key to set local code or long distance code.
LONG DISTANCE
Local Code Setting:
Select 1 then press number key to enter the code. Once done, press
SET key.
Long Distance Setting:
Select 2 and OUT OFF will be displayed on the LCD. Press number key
to enter the code. Once done, press SET key. Once this feature is
turned on, for any phone number that begins with “0”, the phone will
auto-add the long distance code.
LCD Contrast
AUTO-IP
Press SET key. Press 7 keys to display LCD CON 3 on the LCD. Press
UP/DOWN key to adjust LCD contrast. Once done, press SET key. There
are 5 levels and by default, it is set to level 3.
Press SET key. Press 8 keys to display 1-AU 2-3-IP on the LCD.
Select 2 or 3 to key the number and press SET to confirm. Then select
1, the LCD display AUTO IP OFF and OFF will flash, use UP key to
select the IP number.
Auto IP allows you to replace a sequence of number with single 0. E.g.
Setting 1455 as Auto IP, therefore when you need to dial 1455, just put
0 in front (pre-dial mode), 0 2334565 will be dialed as 1455 2334565.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SC3112 User Guide
4. FUNCTION KEY OPERATION
UP and DOWN key
In any mode, press UP/DOWN key to check all the incoming numbers. If there is no incoming
number, the unit will display END. The unit can receive up to 16-digit phone numbers.
CHECK key
Press CHECK key to check incoming and outgoing calls. Press UP/DOWN key to navigate
forward and backward.
DELETE key
In any mode, when checking the incoming and outgoing call, press DEL key to delete the
number you are checking.
PAUSE key
To insert a 3.6 second of pause while dialing, press PAUSE key and it will display P on the LCD
panel
SPEED DIAL Memory key (SAVE)
One-touch Memory:
In on-hook position, press the number you would like to save. Once done, press and
hold M1/M2/M3 key to save. You will see SAVE displayed on the LCD if it is saved
successfully. . If you need to dial out and append a “0” in front of the number, press
CALLBACK and hold for 3 seconds.
Two-touch Memory:
In on-hook position, press the number you would like to save. Once done, press and
hold MEMO key and until SAVE is displayed on the LCD. Press 0-9 key to save in 10
locations.
SPEED DIAL Memory key (CALL)
One-touch Memory:
Press M1/M2/M3 key and the corresponding number will appear on the LCD panel.
Press CALLBACK or HANDSFREE key to dial out the number. If you need to dial out
and append a “0” in front of the number, press CALLBACK and hold for 3 seconds.
Two-touch Memory:
Press MEMO key and you will see LOAD appear on the LCD panel. Press 0-9 key to
reload the saved phone number. Press CALLBACK or HANDSFREE key to dial out the
number. If you need to dial out and append a “0” in front of the number, press
CALLBACK and hold for 3 seconds.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SC3112 User Guide
FLASH key (600ms)
In the on-hook mode, press this key to auto-hang up, after that you can press REDIAL key or
dial out another number.
REDIAL key
In the on-hook mode, press this key to redial the last dialed number.
CALLBACK key
Press CALLBACK key and hold for 3 seconds to dial out the number displayed on the LCD
panel with a “0” append in front of the number.
HANDSFREE (HF) key
While on-hook, press the HANDSFREE key to go into handsfree mode. You can talk through
the microphone and listen from the speakerphone without lifting the handset. While off-hook,
press the HANDSFREE key and put down the handset to go into handsfree mode.
5. ADDITIONAL NOTES
INCOMING CALL LCD INDICATOR
When there is incoming call, the unit will be automatically display the caller number, date
and time, and also display its serial number. If the incoming call is in private mode, it will
display “__p__”; it will display “__0__” if exchange cannot determine the number; it will
display “—E—“ if the call signal contains error.
RING / INCOMING CALL LED INDICATOR
When there is incoming call, the LED will blink.
IN USE LED INDICATOR
When the handset is off hook, the LED will turn on.
LCD BACKLIGHT FUNCTION
When there is incoming call or handset is off-hook, the LCD backlight will lit up. It will be on
for about 6 seconds before going off. Without batteries, LCD backlight will not lit up at all.
TROUBLESHOOTING GUIDE
(Q) I do not hear any dial tone from the handset.
(A) Ensure the handset cord is connected correctly from the handset to the handset cord jack
at the base. Ensure you have plug in the telephone cable from the telephone to the wall
socket correctly. If the problem persists, please check with your local dealer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SC3112 User Guide
(Q) I could not see the caller’s number on the LCD when there is incoming call.
(A) Ensure that you have subscribed Caller ID service from your local telecom provider.
(Q) There is no LCD Display / Backlight after I have connected the telephone line. I can
call out normally.
(A) Ensure that you have inserted the batteries on the battery compartment. If there is still
no display, change the batteries and ensure it is not empty. If the problem persists, please
check with your local dealer.
DECLARATION OF CONFORMITY
The telephone complies with the essential protective requirements and objectives of:
•
•
•
EC R& TTE Directive 1999/5/EC
EC Low Voltage Directive 73/23/EEC
EC EMC Directive 89/336/EEC
And conforms to the following relevant harmonized standards:
•
•
EMC: EN55022, EN55024
Safety: EN 60950
Created on 28th October 2005. SC3112 Caller ID Phone.
Please visit us at www.shirocorp.com.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|