SM
<P=001>
MODEL
HT-DD5000
HOME THEATER SYSTEM
OPERATION MANUAL
Thank you for purchasing this SHARP product.
To obtain the best performance from this product,
please read this manual carefully.
It will guide you in operating your SHARP product.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss
or theft, please record below the model number and serial
number which are located on the rear of the unit.
Please retain this information.
This equipment generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Model number ______________________________
Serial number_______________________________
Date of purchase____________________________
Place of purchase ___________________________
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trade-
marks of Dolby Laboratories. Confidential Unpublished
Works. 1992-1997 Dolby Laboratories, Inc. All rights re-
served.
WARNING
FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could
void the user’s authority to operate this equipment.
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Page
Page
SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-20
RADIO OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22
HOW TO USE THE BUILT-IN TIMER . . . . . . . . . . . . 23-24
HEADPHONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
DESCRIPTION OF TERMINOLOGY . . . . . . . . . . . . . . . .25
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
CONSUMER LIMITED WARRANTY . . . . . . . . Back cover
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . 3-7
EXTERNAL UNIT CONNECTION . . . . . . . . . . . . . . . . . 8-11
SOUND CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
DOLBY DIGITAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
SURROUND EFFECT CONTROL . . . . . . . . . . . . . . . 14-15
ACCESSORIES
Remote control x 1
FM antenna x 1
(QANTW0001SJZZ)
AM loop antenna x 1
(QANTL0001SJZZ)
(RRMCG0004SJSA)
Sub woofer wire × 1
(QCNWH0001SJZZ)
Front speaker wire × 2
(QCNWH0001SJZZ)
Center speaker wire × 1
Surround speaker wire × 2
(QCNWH0002SJZZ)
(QCNWH0001SJZZ)
Note:
Parts and accessories mentioned in
this operation manual other than
those in the drawing are not included.
RCA cord x 1
(QCNWG0003SJZZ)
Coaxial digital cord x 1
(QCNWG0004SJZZ)
PRECAUTIONS
■General
● If the unit does not work properly while in use, disconnect
the AC power cord from the AC outlet. Plug the AC power
cord back in, and then set the POWER button on the
main unit to ON.
● Please ensure that the equipment is positioned in a well
ventilated area and ensure that there is at least 4" (10
cm) of free space along the sides, top and back of the
equipment.
● If an electrical storm is taking place near you, it is sug-
gested that you disconnect the AC power cord from the
AC outlet for safety.
● Do not use oil, solvents, gasoline, paint thinners or in-
secticides on the unit.
● Do not expose the unit to moisture, to temperatures
higher than 140˚F (60˚C) or to extreme low temperatures.
Warning:
● Keep the unit away from direct sunlight, strong magnetic
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which gen-
erates electrical noise.
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other than
which is specified is dangerous and may result in a fire or
other type of accident causing damage. SHARP will not be
held responsible for any damage resulting from use of this
unit with a voltage other than that which is specified.
● Hold the AC power plug by the head when removing it
from the AC outlet, since pulling the cord can damage
internal wires.
■Volume control
● Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local SHARP
service facility.
The sound level at a given volume setting depends on a
combination of speaker efficiency, location and various other
factors.
It is advisable to avoid exposure to high volume levels, which
occur while turning the unit on with the volume control setting
up high, or while continually listening at high volumes.
● Use the unit on a firm, level surface free from vibration,
and do not place anything on the top of the unit.
● If "ERROR" appears or no sound is heard, set the
POWER button on the main unit to OFF. About 5 sec-
onds later, turn the power back on.
2
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE
Unplug the AC power cord from the AC outlet before con-
necting or disconnecting any component.
■Speaker connection
Wires to be used with each speaker
For the front, center and
sub woofer speakers
For the surround speakers
Black
Black
Black (with white line)
Black (with white line)
Length: Approx.
393-3/4" (10 m)
Length: Approx.
98-7/16" (2.5 m)
3
1
2
Connecting the speaker wires
1
2
3
Hold the speaker wire release catch down.
Insert the wire into the speaker terminal.
Release the catch.
Caution:
When connecting the speakers to the unit, connect the wires
to the speakers first, and then to the terminals on the unit.
Front speakers
Front speaker
(Left)
Front speaker
(Right)
Connect each front speaker wire to the FRONT SPEAKER
A terminals as shown.
Use speakers with an impedance of 8 ohms or more, as
lower impedance speakers can damage the unit.
● Connect the black wire with the white line to the negative
(–) terminal, and the black wire to the positive (+) termi-
nal.
Black
Black
Note:
● You can connect the speakers you have to the FRONT
SPEAKER B terminals. The recommended impedance is
8 ohms.
Black (with white line)
Black (with white lline) Black
Center speaker
Connect the center speaker wire to the CENTER SPEAKER
terminals as shown.
Use a speaker with an impedance of 8 ohms or more, as a
lower impedance speaker can damage the unit.
● Connect the black wire with the white line to the negative
(–) terminal, and the black wire to the positive (+) termi-
nal.
Black
Black (with white lline)
Black (with white lline) Black
3
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
Sub woofer
Connect the sub woofer wire to the SUB WOOFER terminals
as shown.
Use a speaker with an impedance of 8 ohms or more, as a
lower impedance speaker can damage the unit.
● Connect the black wire with the white line to the negative
(–) terminal, and the black wire to the positive (+) termi-
nal.
Black
Black (with white line)
Black (with
white line)
Black
Surround speakers
Connect each surround speaker wire to the SURROUND
SPEAKER terminals as shown.
Surround speaker
(Left)
Surround speaker
(Right)
Black
Black
Use speakers with an impedance of 8 ohms or more, as
lower impedance speakers can damage the unit.
● Connect the black wire with the white line to the negative
(–) terminal, and the black wire to the positive (+) termi-
nal.
Black (with white line)
Black (with white line) Black
Caution:
● Do not allow any objects to fall into or to be placed in
● Do not reverse the right channel and left channel wires
the bass reflex openings.
when connecting the speakers to the unit.
● Do not let bare speaker wires touch each other, as this
● Do not stand or sit on the speakers. If the speakers fall
or collapse, you may be injured.
may damage the amplifier and/or speakers.
Note:
● The speaker grilles are not removable.
4
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Placing the speakers
Center
Front
left
Front
right
When you connect this unit to a DVD player playing a disc
with the
trademark, you can enjoy realistic, powerful
sound by playing the soundtrack through 6 channels; the
front left, front right, center, surround left, surround right and
sub woofer speakers.
Sub
woofer
The best sound will be achieved by placing each speaker
the same distance from the listener. Arrange the speakers
so that the layout is as close as possible to the diagram
shown in this illustration.
●
Front speakers
Surround
left
Surround
right
For best performance, place the speakers as shown in the
diagram to the left.
Same distance
Place a TV halfway between the front left and front right
speakers.
Front
right
Front
left
●
Center
Center speaker
It is recommended that the center speaker be placed be-
tween the left and right front speakers.
Example: When installed on the wall
Surround speaker
●
Sub woofer
Place the sub woofer near one of the front speakers, and
orient it toward the listener as much as possible.
Wall
●
23" - 35"
(60 - 90 cm)
Surround speakers
The surround speakers can be used by installing them on
the wall or on stands. Install them 23" - 35" (60 - 90 cm)
above the height of your ears when seated, if possible.
Example: When installed vertically
Note:
The front speakers, center speaker, and sub woofer are
magnetically shielded. The front speakers and sub woofer
may be used by the sides of the TV. The center speaker
may be used on top of the TV. However, some color variation
may occur, depending on the type of TV used.
If color variations occur ....
Turn off the TV (from the power switch). After 15 - 30 min-
utes, turn the TV on again.
If the color variation is still present ....
Move the speakers further away from the TV.
3/32" (2.7 mm)
5/32" (3.8 mm)
■To mount the surround speakers on the
Min. 9-27/32" (25 mm) 9/32" (7 mm)
wall
5/32" (4 mm)
The design of the surround speakers allows them to be hung
on the wall.
1
2
Be sure to use the screw type and size shown to the left.
Min. 8-1/4" (21 mm)
Wall surface
Wall mounting screw
1
Drive one screw into the wall for each speaker as shown
in the illustration.
● Make sure that both the screw and the wall can support
a load of 45 lbs. (20 kg).
● Drive the screws, so there is about a 5/32" (4 mm) space
between the wall and the head of the screw.
● The screw is not included.
Wall surface
2
Mount the surround speaker on the wall so that the screw
head is inserted into the slot on the surround speaker.
5
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Remote control
● When inserting or removing the batteries, push them to-
ward the
battery terminal.
● Installing the batteries incorrectly may cause the unit to
malfunction.
● 2 "AA" size batteries
(UM/SUM-3, R6,
HP-7 or similar)
● The batteries are not included.
Precautions for battery use:
● Insert the batteries according to the direction indicated in
the battery compartment.
+
● Replace all old batteries with new ones at the same time.
-
● Do not mix old and new batteries.
+
● Remove the batteries if they are weak or if the unit will
not be used for long periods of time. This will prevent
potential damage due to battery leakage.
-
Caution:
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Notes concerning use:
● Replace the batteries if the operating distance is reduced
8" - 20’
(0.2 m - 6 m)
or if the operation becomes erratic.
● Periodically clean the transmitter LED on the remote con-
trol and the sensor on the main unit with a soft cloth.
15˚
15˚
● Exposing the sensor on the main unit to strong light may
interfere with operation. Change the lighting or the direc-
tion of the unit.
● Keep the remote control away from moisture, excessive
heat, shock, and vibrations.
SHARP TVs, VCRs and DVDs which are equipped with re-
mote control can be controlled with button groups (A), (B)
and (C).
(A)(B)(C)
Some TV and VCR models may not have some functions.
Please refer to the TV’s, VCR’s and DVD’s operation manual.
The remote control may not funciton with some TV and VCR
models.
(A)
(B)
(C)
For details consult your nearest SHARP dealer or service
center.
6
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Antenna connection
1
3
2
Supplied FM antenna
Connect the FM antenna wire to the FM 75 OHMS terminal
and position the FM antenna wire in the direction where the
strongest signal can be received.
AM loop
antenna
Supplied AM loop antenna
FM antenna
Connect the AM loop antenna wire to the AM and GND
terminals. Position the AM loop antenna for optimum recep-
tion.
Place the AM loop antenna on a shelf, etc., or attach it to
a stand or wall with screws (not supplied).
Notes:
● If you still hear static even after adjusting the position of
the AM loop antenna, try reversing the wires or turn off
the power to any external unit not in use.
3
1
2
● Do not place the antenna wires on the unit. It may result
in noise generation, since the unit is equipped with digital
electronics.
Place the AM loop antenna and the FM antenna wire
away from the unit for better reception.
● If the antenna wires are placed near the AC power cord,
they may cause interference.
49 feet (15 m)
Outdoor AM
antenna
Outdoor
FM antenna
Outdoor FM antenna
Use an outdoor FM antenna (75 ohm coaxial cable) if you
require better reception.
Consult your dealer.
25 feet (7.5 m)
Note:
Ground rod
When an outdoor FM antenna is used, disconnect the sup-
plied FM antenna wire from the FM 75 OHMS terminal.
Outdoor AM antenna
Use an outdoor AM antenna if you need better reception.
Consult your dealer.
75 ohm coaxial
cable
Note:
When using an outdoor AM antenna, be sure to keep the
wire of the AM loop antenna connected.
Ground wire
■Connecting the AC power cord
After connecting the speakers and antennas, plug the AC
power cord into a convenient AC outlet.
AC OUTLET
Note:
AC 120 V, 60 Hz
● Unplug the AC power cord from the AC outlet if the unit
will not be in use for a prolonged period of time.
Unswitched AC Outlet
Used to plug in the AC power plug from other equipment.
The power consumption of any units connected to this outlet
should not exceed a total of 120 W. The power to any equip-
ment connected to this outlet is not switched by the POWER
switch on the HT-DD5000.
To an AC
outlet
7
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL UNIT CONNECTION
■Cords required to connect an external unit
The following cords are available to connect an external unit.
● Cord included with this unit
● Optional cord
Coaxial digital cord
RCA cord
Optical digital cable
Video cord
■When connecting the unit to a DVD player
When connecting an audio signal using an optical digital cable
To the audio (line) output jacks
DVD player
To the video output jack
To the audio (digital) output jack
To the video input jack
TV
When connecting an audio signal using a coaxial digital cord
To the audio (line) output jacks
DVD player
To the video output jack
To the audio (digital) output jack
To the video input jack
TV
Caution: A DVD player allows you to select the "PCM" or "DOLBY DIGITAL" audio output mode. Before playing a Dolby
digital sound disc, be sure to set the unit in the "DOLBY DIGITAL" mode. For more details, see the operation
manual for your DVD player.
8
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■When connecting the unit to a VCR or a camcorder
To the audio output jacks
VCR
To the audio input jacks
TV
To the video output jack
To the video input jack
To the video
input jack
Camcorder
To the audio output jacks
To the video output jack
VCR
■When connecting the unit to a tape deck or an MD deck
To the audio output jacks
MD deck
To the audio input jacks
9
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■When connecting the unit to a stereo turntable or a CD player
CD player
To the audio output jacks
Stereo turntable
■How to switch audio signals and video sig-
nals
When the function button is pressed, a different input signal
can be selected.
To select the unit connected to the CD/AUX jacks
Press the CD/AUX button.
To select the unit connected to the DVD jacks
To select the unit connected to the MD/TAPE jacks
Press the DVD button.
Press the MD/TAPE button.
To select the unit connected to the VCR 1 jacks
To select the unit connected to the PHONO jacks
Press the VCR 1 button.
Press the PHONO button.
To select the unit connected to the VCR 2 jacks
Press the VCR 2 button.
Note:
When a function other than DVD, VCR 1 or VCR 2 is se-
lected, the video monitor output is not available.
■How to turn the power on or off
POWER
STAND-BY
1
Set the POWER button on the main unit to ON.
● The STAND-BY indicator will light up and the power will
be on.
2
3
As long as the STAND-BY indicator is lit, you can turn
the power on or put the unit in the stand-by mode, using
the POWER button on the remote control.
When through using this unit, set the POWER button on
the main unit to OFF.
POWER
● The STAND-BY indicator will go out.
10
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Front speaker selector
● Select the front speakers you want to use.
SPEAKERS
A
B
● Before selecting the switches, be sure to set the VOL-
UME control to 0.
OFF
ON
To listen using the "A" speakers:
Set the SPEAKERS A button to ON.
● Sound will also be heard from the center, sub woofer and
surround speakers.
To listen using the "B" speakers:
Set the SPEAKERS B button to ON.
● No sound will be heard from the center, sub woofer or
surround speakers.
To listen using both the "A" and "B" speakers:
Set the SPEAKERS A and B buttons to ON.
To stop the sound from all of the speakers:
Set the SPEAKERS A and B buttons to OFF.
● To use headphones, set both buttons to OFF.
Note:
● If either pair of the speakers, A or B, are connected to
this unit, when both the SPEAKER A and B buttons are
select to ON, no sound will be heard from the front speak-
ers. Set the button for the speakers which you have con-
nected to this unit to ON.
SOUND CONTROL
■Volume
(Main unit)
(Remote control)
(Main unit operation)
VOLUME
VOLUME
When the VOLUME control is held in the + position, the
volume will increase. When it is held in the − position, the
volume will decrease.
(Remote control operation)
0
1
2
79 80
Press the VOLUME button to increase the volume and
button to decrease the volume.
the VOLUME
Note:
If you were listening at a volume of "71" or louder before
turning the power off, when the power is turned on next time,
the volume will be set back automatically to "70".
■Muting
(Remote control operation)
MUTE
Press the MUTE button to mute the sound immediately.
"MUTE" will flash.
Press the MUTE button again to switch the sound back up
to its previous volume level.
11
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Extra bass (X-BASS)
(Main unit)
X-BASS
(Remote control)
(Main unit/remote control operation)
Press the X-BASS button to emphasize the bass region of
the frequency spectrum. To cancel the extra bass mode,
press the X-BASS button. "X-BASS" will go out.
X-BASS
■Pre-programmed equalizer
1
(Main unit operation)
1
Press the EQUALIZER button.
● The current mode setting will be displayed.
2
Within 3 seconds, turn the jog dial to change to a different
mode.
FLAT
HEAVY 1
HEAVY 2
2
3
SOFT 2
SOFT 1
3
Within 5 seconds, press the ENTER button.
(Remote control operation)
When the EQUALIZER button is pressed, the current mode
setting will be displayed. To change to a different mode,
press the EQUALIZER button repeatedly.
EQUALIZER
FLAT
HEAVY 1
HEAVY 2
SOFT 2
SOFT 1
FLAT: The sound is not modified.
HEAVY 1: Bass and treble are slightly emphasized.
HEAVY 2: Bass and treble are emphasized more.
SOFT 1: Treble is cut a little.
FLAT
HEAVY 1
HEAVY 2
SOFT 2
SOFT 1
SOFT 2: Treble is reduced a lot.
Note:
When the equalizer mode is being used, the Dolby Pro Logic
Surround mode is canceled.
■Sub woofer output level
(Remote control operation)
When the SUB WOOFER LEVEL (
/
) button is pressed,
the sub woofer output level can be changed.
SUB WOOFER
LEVEL (
)
-10 9
+9 +10
12
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
DOLBY DIGITAL
When you connect this unit to a DVD player which is playing
a disc with the trademark, you can enjoy realistic,
DVD
powerful sound by playing back the recorded signal through
6 speakers with the sound coming from the front left, front
right, center, surround left, surround right and sub woofer
speakers.
To listen to a disc using the Dolby Digital mode:
1
2
Connect a DVD player. (See page 8.)
Press the DVD button.
● The current DVD input channel will be displayed. If the
DVD button is pressed while the current DVD channel is
displayed, the input channel (ANALOG, COAXIAL, OPTI-
CAL) can be changed.
DVD
3
Start the DVD player.
Note:
● When the Dolby Digital surround mode is being used, the
equalizer will be set to FLAT.
Type of Dolby digital signal
There are different types of Dolby digital signals. When you select COAXIAL or OPTICAL for the DVD input channel, the
following items will be displayed for 2 seconds. They will also be displayed when the DVD player is operating and the DVD
button is pressed.
Display
Channels available
Display
Channels available
Normal PCM playback
Front (L, R) + surround
(L, R)
DIGITAL
Center only (monaural)
Front (L, R) + center
DIGITAL
DIGITAL
Front (L, R)
Front (L, R) + center +
surround (monaural)
(When the surround mode
is set to Normal, Phantom
or Wide sound will also be
heard from the surround
speakers.)
DIGITAL
DIGITAL
Front (L, R) + surround
(monaural)
Front (L, R) + center +
surround (L, R)
DIGITAL
DIGITAL
● If a low frequency sound effect (Low Frequency Effect) contains a Dolby digital signal, "LFE" will light in the display.
When this "LFE" is lit, low frequency signals will be output from the sub woofer.
When Dolby digital signals are input, the display will light up
or go out, as shown to the left.
The channel speaker and SW indicators are used to set the
sound for listening in the surround mode and will light up
according to the speaker signals that are present.
➁
➂
➀
➀ Lights up if the input contains a left channel signal.
➁ Lights up if the input contains a center channel signal.
➂ Lights up if the input contains a right channel signal.
➃ Lights up if the input contains an "LFE" signal.
➄
➃
➄ Lights up when the amplifier setting will output sound to
sub woofer.
➅ Lights up if the input contains a left surround signal.
➆ Lights up if the input contains surround signals.
➇ Lights up if the input contains a right surround signal.
➆ ➇
➅
13
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
SURROUND EFFECT CONTROL
This product allows you to enjoy 3 surround modes.
Normal mode/Wide mode:
When you play a sound source that has the
Phantom mode:
When you play a sound source that has the
(5.1 channels) or
surround sound using all 6 speakers.
trademarks, you can enjoy
or
trademarks, you can enjoy surround sound
using 5 speakers, but not the center speaker.
■NORMAL/PHANTOM/WIDE mode
3
2
When you connect this unit to other equipment (DVD player,
LD player, video etc.) which is playing sound sources that
have the
or
trademarks, you can
enjoy Dolby surround sound.
To listen to Normal/Phantom/Wide mode:
4 5
1
2
Connect the unit you want to play.
Press the DVD button to select the DVD input from the
jack you connected in step 1.
(Main unit operation)
3
4
Press the DOLBY SURROUND button.
Within 3 seconds, turn the jog dial to select the Dolby
Pro Logic Surround mode.
2
3
STEREO NORMAL
WIDE
PHANTOM
5
6
Within 5 seconds, press the ENTER button.
Play the video software program.
(Remote control operation)
3
4
Press the DOLBY SURROUND button.
Within 3 seconds, press the DOLBY SURROUND button
repeatedly to select the Dolby Pro Logic Surround mode.
STEREO NORMAL
WIDE
PHANTOM
5
Play the video software program.
Note:
● When the Normal/Phantom/Wide mode is being used, the
equalizer will be set to FLAT.
14
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
NORMAL:
NORMAL/WIDE
● For a stereo 2 channel input or a Dolby digital 2/0 input,
sound will be output from the front left, front right, center
and surround speakers. The same monaural channel will
be output from the left and right surround speakers.
Center speaker
Front speaker
(Right)
Front speaker
(Left)
● For a Dolby digital 5.1 channel input, sound will be output
from the front left, front right, center, sub woofer, surround
left and surround right speakers.
Sub
woofer
If the surround signal only contains 1 channel, the same
monaural channel will be output from the left and right
surround speakers.
● For a Dolby digital 1/0 input, sound will only be output
Surround
(Left)
Surround
(Right)
from the center speaker.
WIDE:
PHANTOM
Select the WIDE mode if you have a large center speaker.
With the WIDE mode, you can take full advantage of Dolby
Pro Logic Surround sound.
Front speaker
(Right)
Front speaker
(Left)
PHANTOM:
Sub
woofer
The difference between this mode and the normal mode is
that no sound is output from the center speaker.
The center speaker signal is split equally and added to the
sound for the front left and front right speakers.
Surround
(Right)
Surround
(Left)
STEREO:
Cancel the surround mode. Sound will only be output from
the front left and front right speakers.
STEREO
● For a Dolby digital multichannel input, any center or rear
Front speaker
(Right)
Front speaker
(Left)
signals will be mixed and output from the front speakers.
● For a Dolby digital 1/0 input, monaural sound will be out-
put from the front speakers.
Sub
woofer
■Preset balance
(Remote control operation)
While you are listening to music in any of the Dolby Pro
Logic Surround modes (NORMAL, PHANTOM, WIDE), you
can change the apparent position of the sound coming from
the speakers to any position which has been stored in the
memory of this unit.
1
Press the PRESET BALANCE button.
● The current mode setting will be displayed.
2
To change to a different mode, press the PRESET BAL-
ANCE button repeatedly.
PRESET
BALANCE
CENTER: More pronounced sound is heard from the center.
BACK: More sound is heard from the rear.
FRONT: More sound is heard from the front.
3
The speaker level setting (see page 18) lets you change
the center level or the surround level.
Notes:
● If you turn off the power or press the PRESET BALANCE
button, the center level or the surround level settings will
be returned to their original levels.
● The initial setting of this product is in the CENTER posi-
tion.
15
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
■Speaker size setting
1
2
Press the MENU button repeatedly to make "SP SIZE"
appear.
Within 10 seconds, press the ITEM button to make
"FRONT-SP" appear.
● The front speaker indicators will flash.
MENU
ITEM
3
Within 10 seconds, press the SET UP ( or ) button
to select "LARGE" or "SMALL".
SET UP
LARGE: When the front speakers can reproduce low fre-
quencies (speakers which can reproduce sounds
lower than 60 Hz)
SMALL: When the front speakers cannot reproduce ex-
tremely low frequencies
4
Within 10 seconds, press the ITEM button to make
"CENT-SP" appear.
DIGITAL
1
● The center speaker indicators will flash.
5
Within 10 seconds, press the SET UP ( or ) button
to select "LARGE", "SMALL" or "SP-NO".
DIGITAL
DIGITAL
LARGE: When the center speaker can reproduce low fre-
quencies (speakers which can reproduce sounds
lower than 60 Hz)
2
3
SMALL: When the center speaker cannot reproduce ex-
tremely low frequencies
2 seconds
DIGITAL
NO:
When no speaker is connected (When NO is se-
lected, the indicator for that speaker position will
go out.)
DIGITAL
DIGITAL
6
Within 10 seconds, press the ITEM button to make
"SURR-SP" appear.
● The surround speaker indicators will flash.
4
5
7
Within 10 seconds, press the SET UP ( or ) button
to select "SP-YES" or "SP-NO".
2 seconds
DIGITAL
YES:
NO:
When the speakers are connected
When no speaker is connected (When NO is
selected, the indicator for that speaker position
will go out.)
DIGITAL
8
Within 10 seconds, press the ITEM button to make "S-
WOOFER" appear.
DIGITAL
DIGITAL
● The sub woofer speaker indicators will flash.
9
Within 10 seconds, press the SET UP ( or ) button
to select "SP-YES" or "SP-NO".
6
7
Notes:
2 seconds
● When all 6 speakers have been connected, set each of
DIGITAL
the items to "LARGE", "SMALL" or "YES".
● When using the speakers included with this unit, the rec-
ommended speaker size settings are "SMALL" for the
front and center speakers and "SP-YES" for the surround
and sub woofer.
DIGITAL
DIGITAL
8
9
2 seconds
DIGITAL
DIGITAL
16
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Speaker delay setting
The best sound will be achieved by placing the front speak-
ers, center speaker and surround speakers at the same dis-
tance from the listener.
When some of the speakers are at a different distance from
the listener, you can select a speaker delay to make it seem
as though the speaker distances are the same.
(Factory-shipped settings: CENTER → 0 ms, SURROUND
→ 5 ms)
MENU
ITEM
If the settings need to be changed due to the type of sound
source being played or the conditions in the room, change
them as follows.
SET UP
1
2
Press the MENU button repeatedly to make "SP DELAY"
appear.
Within 10 seconds, press the ITEM button to select
"CENT-SP" or "SURR-SP".
CENT-SP: To delay the sound from the center speaker
SURR-SP: To delay the sound from the surround
speakers
DIGITAL
1
2
3
● The selected speaker indicator(s) will flash.
3
Within 10 seconds, press the SET UP ( or ) button
to select a value.
DIGITAL
Adjustable range
CENTER: 0 ms - 5 ms
SURROUND: 0 ms - 15 ms
(When the DIGITAL indicator is lit)
15 ms - 30 ms
DIGITAL
mS
0
1
4
5
(When the DIGITAL indicator is not lit)
(Can be changed in 1 ms steps.)
DIGITAL
2
3
Notes:
● As a guide for setting the correct delay time, 1 ms is
equal to approximately 12" (30 cm) from where the se-
lected speakers are placed further away from the listener
than the typical location.
DIGITAL
mS
0
1
14 15
● If the delay time for the surround speakers is set to a
large value, a large sound space will be created. If it is
set to a small value, the sound space will be small and
intimate.
17
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Front speaker balance adjustment
You can adjust the balance between the left and right chan-
nels of the front speakers.
1
2
Press the MENU button repeatedly to make "SP LEVEL"
appear.
Within 10 seconds, press the ITEM button to make "F-SP
CEN" appear.
MENU
ITEM
SET UP
● The front speaker indicators will flash.
3
Within 10 seconds, pressing the SET UP
button will
increase the right speaker level (the left speaker level will
decrease), or pressing the SET UP button will increase
the left speaker level (the right speaker level will de-
crease).
DIGITAL
DIGITAL
DIGITAL
● If the SET UP ( or ) button is held down, the speaker
1
2
3
level can be changed continuously.
● The speaker balance, as shown in the display, can be
changed within a range of "1" to "20".
Note:
The surround speaker balance will not be changed.
To balance the front speaker(s):
In step 3, press the SET UP ( or ) button to make "F-SP
CEN" appear.
1
2
2
9
9
20
20
DIGITAL
■Speaker level setting
The output level of the center, surround or sub woofer speak-
ers can be adjusted.
1
1
2
Press the MENU button repeatedly to make "SP LEVEL"
appear.
Within 10 seconds, press the ITEM button repeatedly to
select the speaker (CENT, RSUR, LSUR or SWFR) you
want to adjust.
DIGITAL
DIGITAL
1
2
● The selected speaker indicator will flash.
Note:
dB
dB
dB
dB
● While
displayed.
If DIGITAL is not lit, "SURR" will be displayed.
DIGITAL is lit, "RSUR" and "LSUR" will be
DIGITAL
DIGITAL
DIGITAL
3
Within 10 seconds, press the SET UP ( or ) button
to adjust the output level.
● You can change the level within a range of +10dB to
-10dB, in 1dB steps.
● While
can be adjusted independently by displaying "RSUR" and
"LSUR". However, if DIGITAL is not lit, "SURR 0dB"
DIGITAL is lit, the left and right speaker levels
will be displayed, and both channels will be adjusted at
the same time.
18
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Test tone
You can check (and adjust) the speaker level by listening to
the sound output from each speaker individually, while stand-
ing at the actual listening position in the room.
The speaker level can be adjusted using the remote control.
1
Press the MENU button repeatedly to make "TEST" ap-
pear.
MENU
ITEM
SET UP
2
Within 10 seconds, press the ITEM button.
● The test tone will be heard from each speaker, in order,
at about 5 second intervals.
Note:
● While
DIGITAL is lit, "R-SURR" and "L-SURR" will be
DIGITAL is not lit, "SURR" will be displayed.
displayed.
If
DIGITAL
L-FRNT
1
2
↓
CENTER
↓
R-FRNT
DIGITAL
DIGITAL
DIGITAL
DIGITAL
↓
R-SURR
↓
L-SURR
↓
S-WOOFER
● When the test tone is being output, the indicator for that
speaker will flash.
● The test tone will be heard until the current menu selec-
tion is changed by pressing the MENU button again, or
by selecting some other function.
3
To adjust the speaker level while the test tone is being
output from a particular speaker, press the SET UP (
or ) button.
● The speaker level can be adjusted within a range of
+10dB to -10dB, in 1dB steps.
DIGITAL
Notes:
● If "NO" is selected for any individual speaker’s size setting
(page 16), the test tone will not be heard from that
speaker.
DIGITAL
● Please note that the front left and front right speaker lev-
els cannot be adjusted using this method.
● When a surround test is performed while
lit, "R-SURR" and "L-SURR" will be displayed and can
be adjusted. However, if DIGITAL is not lit, "SURR"
DIGITAL is
DIGITAL
3
will be displayed, and both channels will be adjusted at
the same time.
19
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Dynamic range setting
DVD discs have a wider dynamic range (sound volume
range) than existing VHS videotapes or CD discs. If they are
played in home systems, there may be too much difference
between the loud and quiet sounds. Therefore, if the volume
is set so that the quiet sounds can be heard clearly, the loud
sounds may be far too loud.
On the other hand, if the volume is set so that the loud
sounds are not too loud, you may not be able to hear the
quiet sounds. Three settings are available to control the dy-
namic range easily.
MENU
ITEM
SET UP
1
2
Press the MENU button repeatedly to make "D-RANGE"
appear.
Within 10 seconds, press the ITEM button to select
"MAX", "STD" or "MIN".
MAX:
This setting does not compress the dynamic range
of the Dolby digital signal, allowing you to enjoy
the full, powerful sound of Dolby encoded digital
signals.
DIGITAL
STD:
MIN:
This setting compresses the dynamic range, and
may produce a more appropriate volume range for
home use.
This setting compresses the dynamic range, allow-
ing you to enjoy movies at a lower volume.
1
2
DIGITAL
DIGITAL
DIGITAL
Returning various surround settings to their de-
fault condition:
1
1
Hold down the DOLBY SURROUND button on the main
unit until "CLEAR" appears.
2
Within 5 seconds, press the ENTER button.
● As shown on the setup menu, any of the settings that
have been changed will be returned to their factory de-
fault settings.
2
20
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATION
■Tuning
1
1
2
3
Set the POWER button on the main unit to ON.
Press the TUNER (BAND) button.
Press the TUNER (BAND) button again to select the de-
sired frequency band. (FM ST, FM or AM)
4
Press the TUNING (UP or DOWN) button to tune into
the desired station.
2,3,5,6
4
Manual tuning:
Press the TUNING (UP or DOWN) button as many times as
required to adjust the frequency shown in the display to the
frequency of the desired station.
Auto tuning:
When the TUNING (UP or DOWN) button is pressed for
more than 0.5 seconds, scanning will start automatically and
the tuner will stop at the first receivable broadcast station.
Notes:
● When radio interference occurs during auto scan tuning,
auto scan tuning may stop automatically at that point.
● If a weak station signal is found during auto scan tuning,
the station will be skipped.
● To stop auto tuning, press the TUNING (UP or DOWN)
button again.
5
To receive an FM stereo transmission, press the TUNER
(BAND) button so that the "STEREO" indicator on the
display lights up.
● " " will appear when an FM broadcast is in stereo.
6
If the FM reception is weak, press the TUNER (BAND)
button so that the "STEREO" indicator goes out.
● Although the reception changes to monaural, the sound
becomes clearer.
After use:
Set the POWER button on the main unit to OFF.
Notes:
● The last station tuned in will be recalled, even after
changing the tuning band or the function, or after turning
the power off.
● When listening to a radio station broadcasting monaural
sound, select STEREO in the Dolby Surround mode.
21
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Preset tuning
You can store up to 40 stations in memory (40 stations con-
sisting of any combination of FM and AM stations you like)
and recall them at the push of a button.
To enter stations into memory:
1
2
Perform steps 1 - 6 in the "Tuning" section.
Press the MEMORY button.
● "MEMORY" will flash.
3
Within 5 seconds, turn the jog dial to make the preset
channel number flash in the display.
● Store the stations in memory, in order, starting with preset
channel 1.
4
Within 5 seconds, press the ENTER button to store that
station in the selected station preset number memory.
2
4
3
● If the "MEMORY" and preset number indicators go out
before the station is memorized, repeat the operation
from step 2.
5
Repeat steps 1 - 4 to set other preset stations, or to
change a preset station.
To recall a memorized station:
Turn the jog dial on the main unit or press the PRESET (
or ) button on the remote control for less than 0.5 seconds
to select the desired station.
● The stations (preset channel number, frequency and fre-
quency band) which have been stored in memory will
appear in the display in numerical order, irrespective of
the frequency bands.
Note:
When searching for a memorized station, do not press the
PRESET button for more than 0,5 seconds.
When the PRESET button is pressed for more than 0,5 sec-
onds, the unit will enter the preset memory scan mode.
Backup function:
The backup function protects all station presets for a few hours
should there be a power failure or the AC power cord is removed
from the AC outlet.
■Preset memory scan
The stations saved in the preset memory can be scanned auto-
matically.
1
To scan the preset stations, press the PRESET (
button for more than 0,5 seconds.
or
)
PRESET
● The station preset number will flash and the programmed sta-
tions will be tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again to stop the mem-
ory scan at the desired station.
Note:
When the preset memory does not have any stations stored in
it, the preset memory scan will not function.
To erase the contents in the preset memory:
1
2
3
Select the preset channel number you want to erase.
Hold down the MEMORY button until "CLR" appears.
Within 5 seconds, press the ENTER button.
● After performing this operation, the preset memory informa-
tion will be erased.
22
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE BUILT-IN TIMER
■Timer playback
● Timer operation is only possible when the TUNER func-
TIMER
1
tion is selected.
1
2
Set the POWER button on the main unit to ON.
Press the TUNER (BAND) button.
● Tune in the desired station.
3
4
Press the TIMER/SLEEP button repeatedly until "TIMER"
is displayed.
Turn the jog dial to select how many hours from now you
want to start timer playback.
2
4
5
3
● The maximum time that you can specify is 12 hours, in
15-minute intervals.
OFF ↔ 0:15 ↔ 0:30 ....... 11:45 ↔ 12:00
3
4
5
Press the ENTER button.
● After the timer setting has been displayed for 2 seconds,
the tuner band and station will be displayed.
● The TIMER indicator will light up. The unit will enter the
timer stand-by mode.
6
7
Adjust the volume level.
Press the POWER button on the remote control to turn
the power off.
Note:
● When you set the POWER button on the main unit to
OFF, the main power will be turned off, and timer play-
back will not work.
8
When the timer start time is reached, timer playback will
start.
7
● The volume will increase gradually until it reaches the
volume you were listening to before turning off the unit.
● Even if you selected a different function other than the
tuner before turning off the power, the tuner will be se-
lected.
9
The power will be turned off one hour after the timer has
started.
● When it is one minute before the timer-off time, the vol-
ume will start to fade.
To check the timer setting (when in the timer play-
back stand-by mode):
Press the TIMER/SLEEP button once.
● The remaining operation time will be displayed for 2 sec-
onds. Then the tuner band and station will be displayed
for 2 seconds.
To cancel the timer operation:
Press the POWER button to turn the power on.
To resume timer playback:
To set timer playback again after a timer playback operation
has finished, perform steps 1 - 7 above.
● The timer playback setting time will be canceled after a
timer playback operation has finished.
23
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
■Sleep operation
The tuner and any components that are connected to the
DVD, VCR-1, VCR-2, CD/AUX, MD/TAPE or PHONO jacks
can be turned off automatically.
1
2
Play back the desired sound source.
Press the TIMER/SLEEP button repeatedly until "SLEEP"
is displayed.
3
Turn the jog dial to set the sleep time.
● The maximum sleep time you can specify is 2 hours, in
2
3
4
1
5-minute intervals.
OFF ↔ 5 ↔ 10 ............ 1:55 ↔ 2:00
4
5
Press the ENTER button.
2
3
The unit will turn off automatically after the preset sleep
time has elapsed.
● When it is one minute before the sleep-off time, the vol-
ume will start to fade.
To check the remaining sleep time:
Press the TIMER/SLEEP button twice.
To cancel the sleep operation:
Press the POWER button to turn the power off.
Notes:
● After the sleep operation has finished, the sleep setting
time will be canceled. If you want to set the sleep oper-
ation again, start from the beginning of this procedure.
● The sleep operation cannot control any components that
are connected to the DVD, VCR-1, VCR-2, CD/AUX,
MD/TAPE or PHONO jacks.
HEADPHONES
● Before plugging in or unplugging the headphones, make
sure the volume level is reduced.
● Be sure your headphones have a 1/4" (6.3 mm) diameter
plug and are between 16 ohms and 50 ohms impedance.
The recommended impedance is 32 ohms.
1
2
Set the SPEAKERS A and B button to OFF.
When headphones are connected, adjust the VOLUME
control for the desired volume.
Note:
● When using headphones, it is recommended that you se-
lect STEREO in the Dolby Surround mode.
24
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION OF TERMINOLOGY
Dolby Pro Logic Surround:
Dolby Digital:
This refers to the Dolby Surround sound decoder system
which is used for movies. Using 4 channels, the sound ef-
fects, dialog, sound direction, music, etc. are all reproduced
more realistically. Dolby Pro Logic Surround makes the lo-
cation and movement of sounds much more natural than the
original Dolby Surround system. You can enjoy a realistic,
powerful feeling like being at a live performance or as if you
were at a movie theater or in a concert hall. In order to enjoy
this effect, you need at least one pair of surround speakers
and center speaker.
This is the new digital surround system that was created to
reproduce theater quality stereophonic Dolby Surround
sound at home. Films are now recorded using the 5.1 chan-
nel system. Dolby Digital can handle the original soundtrack
without modification, allowing you to enjoy the sound field
created by the film maker at home.
L
C
R
L
C
R
S
S
Dolby Pro Logic
Dolby Digital
2
4
Number of recording channels
Number of playback channels
6
6
Front (L, R) + Center + Rear (L, R) +
Low frequency effects (sub woofer)
Front (L, R) + Center + Rear
Playback configuration of channels
Discrete processing,
Dolby digital encoding/decoding
Matrix processing, Dolby Surround
Sound processing
16 bits
7 kHz
Number of signal processing bits
20 bits
Surround Sound high-frequency
playback limit
20 kHz
Dolby Surround:
PCM (Pulse Code Modulation)
This is a recording/transmission system used for digital audio
signals. This unit can handle sampling frequencies of 32 kHz,
44.1 kHz and 48 kHz.
This is the encoding/decoding system for general-purpose
Dolby Surround. When the sound from films recorded in
Dolby Surround are reproduced, you will have the feeling of
being at a live performance, as if the action is taking place
right in front of you.
Sub woofer:
The sub woofer is a special speaker used to emphasize bass
sounds.
LFE (Low Frequency Effect):
This refers to the special low-frequency sound effects used
in Dolby Digital recordings.
When a signal containing LFE encoding is played by this
unit, "LFE" will appear in the display.
In Dolby Digital, this speaker reproduces the LFE signals as
well as the low-frequency signals being sent to the front,
center and surround speakers.
In Dolby Pro Logic, this speaker reproduces the low-fre-
quency signals sent to the front and center speakers.
It also reproduces low frequency sounds from ordinary stereo
recordings.
25
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
■External care
● Periodically wipe the cabinet with a soft cloth and a di-
luted soap solution, then wipe with a dry cloth.
● Do not use chemically treated cleaning cloths or other
chemicals.
SPECIFICATIONS
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes
for product improvement without prior notice. The performance specification figures indicated are nominal values of pro-
duction units. There may be some deviations from these values in individual units.
● Center speaker section
● General
Type:
2-way, 5-1/8" (13 cm) woofer,
and 2" (5 cm) tweeter
Type:
Power source:
Power consumption: 170 W
Dimensions:
Home theater receiver
AC 120 V, 60 Hz
Maximum input power: 80 W
Impedance:
Dimensions:
8 ohms
Width; 16-15/16" (430 mm)
Width; 15-3/4" (400 mm)
Height; 6-1/2" (165 mm)
Depth; 6-7/16" (163 mm)
6.4 lbs. (2.9 kg)
Height; 5-15/16" (150 mm)
Depth; 13-11/16" (347 mm)
21.6 lbs. (9.8 kg)
Weight:
Output power:
Weight:
(Front)
40 watts minimum RMS per chan-
nel into 8 ohms from 60 Hz to
20 kHz, 0.9% total harmonic dis-
tortion.
(Center)
RMS; 40 W (0.9% T.H.D.)
(Surround)
RMS; 40 W/CH (0.9% T.H.D.)
(Sub woofer)
RMS; 40 W (0.9% T.H.D.)
Front speakers; 8 ohms
Center speaker; 8 ohms
Surround speakers; 8 ohms
Sub woofer; 8 ohms
● Surround speaker section
Type:
2-way 5-1/8" (13 cm) woofer,
and 2" (5 cm) tweeter
Maximum input power: 80 W
Impedance:
8 ohms
Dimensions:
Width; 8-5/16" (210 mm)
Height; 6-1/2" (165 mm)
Depth; 6-7/16" (163 mm)
3.5 lbs. (1.6 kg)/each
Output terminals:
Input terminals:
Weight:
Headphones; 16-50 ohms
(recommended; 32 ohms)
DVD, VCR-1, VCR-2, CD/AUX,
MD/TAPE; 500 mV/47 kohms
PHONO; 3.5 mV/47 kohms
● Sub woofer section
Type:
6-5/16" (16 cm) super woofer
Maximum input power: 80 W
● Tuner section
Impedance:
8 ohms
Frequency range:
FM; 87.5-108 MHz
AM; 530-1,720 kHz
Dimensions:
Width; 8-5/16" (210 mm)
Height; 13" (330 mm)
Depth; 13-3/8" (340 mm)
11.5 lbs. (5.2 kg)
● Front speaker section
Weight:
Type:
2-way, 6-5/16" (16 cm) woofer,
and 2" (5 cm) tweeter
Maximum input power: 80 W
Impedance:
Dimensions:
8 ohms
Width; 8-5/16" (210 mm)
Height; 13" (330 mm)
Depth; 8-5/8" (218 mm)
8.2 lbs. (3.7 kg)/each
Weight:
26
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when
shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair
the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for
parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any
Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal
service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of
purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED
WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S)
FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein,
or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive
remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute
complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full
satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any
way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not
apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE.
Model Specific Section
HT-DD5000 Home Theater System
Your Product Model Number & Description:
(Be sure to have this information available when you need service for your Product.)
One (1) year parts and labor from the date of purchase.
Warranty Period for this Product:
Additional Item(s) Excluded from
Warranty Coverage (if any):
Where to Obtain Service:
Non-functional accessories, supplies and consumable items.
At a Sharp Authorized Servicer located in the United States. To find a location of the
nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP.
Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure to
have Proof of Purchase available. If you ship the Product, be sure it is insured and
packaged securely.
What to do to Obtain Service:
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
TINSE0009SJZZ
Printed in China
A9806.SM
HT-DD5000(SEC) TINSE0009SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
|