Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
CD-ES600 Mini Component System consisting of CD-ES600 (main unit)
and CP-ES600 (speaker system).
CD-ES66 Mini Component System consisting of CD-ES66 (main unit)
and CP-ES66 (speaker system).
MINI COMPONENT SYSTEM
MODEL
CD-ES600
CD-ES66
OPERATION MANUAL
Accessories
Please confirm that the following accessories are included.
Remote control
1
AM loop antenna
1
FM antenna
1
(RRMCG0390AWSA) (QANTL0005AWZZ)
(92LFANT1746A)
Note:
Only the above accessories are included.
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
5
Read Instructions - All the safety and operating instructions should
be read before the product is operated.
10 Ventilation - Slots and openings in the cabinet are provided for venti-
lation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or cov-
ered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been
adhered to.
Retain Instructions - The safety and operating instructions should be
retained for future reference.
Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
Follow Instructions - All operating and use instructions should be
followed.
11 Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
12 Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
6
7
Attachments - Do not use attachments not recommended by the prod-
uct manufacturer as they may cause hazards.
Water and Moisture - Do not use this product near water - for ex-
ample, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8
Accessories - Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufac-
turer, or sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a mounting ac-
cessory recommended by the manufacturer.
Alternate Warnings - This product is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.
13 Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
9
A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to over-
turn.
14 Protective Attachment Plug - The product is equipped with an at-
tachment plug having overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the
same overload protection as the original plug.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
IMPORTANT SAFETY INSTRUCTIONS (continued)
15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this
is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges. Article810 of the National Electrical Code, ANSI/
NFPA 70, provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an an-
tenna discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
product through openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
20 Servicing - Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
21 Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
a) When the power-supply cord or plug is damaged,
b)If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
ANTENNA LEAD IN WIRE
GROUND
CLAMP
d)If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the op-
erating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation,
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
e) If the product has been dropped or damaged in any way, and
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
NEC - NATIONAL ELECTRICAL CODE
S2898A
22 Replacement Parts - When replacement parts are required, be sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
16 Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and
power-line surges.
23 Safety Check - Upon completion of any service or repairs to this prod-
uct, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
17 Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
24 Wall or Ceiling Mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
25 Heat - The product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products (including ampli-
fiers) that produce heat.
18 Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Contents
Page
! General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 9
ENERGY STAR® Program Information
As an ENERGY STAR® Partner, SHARP has determined that this
product meets the ENERGY STAR® guidelines for energy efficiency.
ENERGY STAR® is a U.S. registered mark.
! Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 12
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
! Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
WHY PURCHASE ENERGY STAR® LABELED PRODUCTS?
! CD Playback
Many Electrical /Electronic Products use energy both when they are on
and when they are off. Americans spend more than $3 billion a year on
energy consumed by home electronic products when they are not in
use. The new ENERGY STAR® labeled models will reduce that en-
ergy “leakage” by up to 75 percent. Ultimately, this will mean more than
$1 billion a year in energy savings for consumers.
Listening to a CD (CDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17
Advanced CD playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 - 20
! Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22
The energy savings will help reduce the burning of fossil fuels and the
related carbon dioxide pollution that contributes to global warming.
If every American family replaced their electronic equipment with
ENERGY STAR® labeled models, it would reduce air pollution equiva-
lent to eliminating more than two million cars.
! Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2) . . . . . . . 23, 24
! Tape Recording
Recording on a cassette tape . . . . . . . . . . . . . . . . . . . . . . .24 - 26
By using ENERGY STAR® labeled products, you will save money on
your electric bills and use less energy.
That makes good economic sense and it’s good for our environment.
! Advanced Features
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . .27 - 30
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 32
To comply with the ENERGY STAR® standards mentioned above,
please cancel the demonstration mode, as described on page
.
12
! References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 - 34
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ENERGY STAR® is a U.S. registered mark.
CONSUMER LIMITED WARRANTY . . . . . . . . . . . . . . .Back cover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Precautions
! General
" Hold the AC power plug by the head when
removing it from the AC outlet, as pulling
the cord can damage internal wires.
" Please ensure that the equipment is positioned in a well-venti-
lated area and ensure that there is at least 4" (10 cm) of free
space along the sides, top and back of the equipment.
4" (10 cm) 4" (10 cm)
4" (10 cm)
" Do not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.
4" (10 cm)
" Use the unit on a firm, level surface free from
vibration.
" This unit should only be used within the range of 41°F - 95°F
(5°C - 35°C).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of acci-
dent causing damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage other than that
which is specified.
" Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
! Volume control
" Do not place anything on top of the unit.
The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid
exposure to high volume levels, which occurs while turning the unit
on with the volume control setting up high, or while continually lis-
tening at high volumes.
" Do not expose the unit to moisture, to temperatures higher than
140°F (60°C) or to extremely low temperatures.
" If your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and
then turn on your system.
" In case of an electrical storm, unplug the
unit for safety.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Controls and indicators
! Front panel
Reference page
1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14
4. CD Track Up or Fast Forward, Tape 2 Fast Forward,
Tuner Preset Up, Time Up Button . . . . . . . . . . . 15, 17, 22, 24
5. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 15, 27, 30
6. Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7. Tuning Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8. CD Track Down or Fast Reverse, Tape 2 Rewind,
13
1
2
3
14
15
Tuner Preset Down, Time Down Button . . . . . . 15, 17, 22, 24
9. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 14
10. Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 23
11. Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
12. Game/Video Input Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
13. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 16
14. CD Direct Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
15. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 16
16. CD Play or Repeat, Tape Play Button . . . . . . . . . . . 16, 19, 23
17. Memory/Set Button . . . . . . . . . . . . . . . . . . . 15, 20, 22, 27, 30
18. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . . 25, 26
19. CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . 17, 24
20. Extra Bass/Demo Mode Button . . . . . . . . . . . . . . . . . . 12, 14
21. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
22. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 23
23. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
24. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
25. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
26. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
16
4
17
18
5
6
7
19
8
20
21
9
10
22
11
23 24 25 26
12
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Controls and indicators (continued)
! Display
1
2 3 4 5
6
7
Reference page
1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2. CD Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3. CD Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5. CD Repeat Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. Tape Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 21
10. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
11. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 21
12. Tape 2 Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
13. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
14. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
15. Timer Recording Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 28
8
9 10 11
12
13 14 15
! Rear panel
Reference page
1. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. FM 75 Ohms Antenna Terminal . . . . . . . . . . . . . . . . . . . . . . 11
4. FM Antenna Ground Terminal . . . . . . . . . . . . . . . . . . . . . . . 11
5. AM Loop Aerial Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. Video Output Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3
4
5
6
! Speaker system
1. Tweeter
2. Passive Radiator
3. Woofer
4. Speaker Wire
1
2
1
7
2
3
4
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
! Remote control
Reference page
1
2
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 16
3. CD Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . 14, 20
4. Memory/Set Button . . . . . . . . . . . . . . . . . . . 15, 20, 22, 27, 30
5. CD Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6. CD Track Down or Fast Reverse, Tape 2 Rewind,
Tuner Preset Down, Time Down Button . . . . . . 15, 17, 22, 24
7. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . . 25, 26
8. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 14
9. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
10. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
11. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14
12. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
13. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 15, 27, 30
14. Disc Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 18
15. CD Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16. CD Track Up or Fast Forward, Tape 2 Fast Forward,
13
14
3
4
5
6
7
15
16
17
18
19
20
8
9
Tuner Preset Up, Time Up Button . . . . . . . . . . . 15, 17, 22, 24
17. CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
18. CD Play or Repeat, Tape Play Button . . . . . . . . . . . . . . 16, 19
19. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
20. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
21. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 14
10
11
12
21
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
System connections
Make sure to unplug the AC power cord before any connections.
Antenna connection (see page 11)
FM antenna
AM loop antenna
Right speaker
Left speaker
Speaker connection (see page 11)
AC outlet
(AC 120 V, 60 Hz)
AC power connection (see page 12)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
! Antenna connection
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Supplied FM antenna:
Connect the FM antenna wire to the FM 75 OHMS terminal and
position the FM antenna wire in the direction where the strongest
signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM LOOP jack. Position the
AM loop antenna for optimum reception. Place the AM loop antenna
on a shelf, etc., or attach it to a stand or a wall with screws (not sup-
plied).
Red
Black
Caution:
" Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
" Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
" Do not let the bare speaker wires touch
each other.
" Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
" Do not stand or sit on the speakers. You may
be injured.
Incorrect
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
! Placing the speaker system
The left and right speakers have individual shapes. For best perfor-
mance, place the speakers according to the diagram below.
Installing the AM loop antenna:
< Assembling >
< Attaching to the wall >
Right speaker
Left speaker
Wall Screws (not supplied)
Note:
The speaker grilles are not removable.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
System connections (continued)
! AC power connection
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the
unit first, the unit will enter the demonstration mode.
! Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration
mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button.
The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
AC outlet
(AC 120 V, 60 Hz)
Note:
Notes:
When the power is on, the X-BASS/DEMO button can be used to se-
lect the extra bass mode.
" The unit will start the tape initialization when plugged in to the AC
outlet. During this process, an initializing sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
" Unplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.
! Outdoor FM antenna
Use an outdoor FM antenna if you require better reception. Consult
your dealer.
Outdoor
FM antenna
Cooling fan:
This product is equipped with a cooling fan inside, which begins to
run once the power is on for better heat radiation.
75 ohm
coaxial cable
Note:
When an outdoor FM antenna is used, disconnect the supplied FM
antenna wire.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Remote control
Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
" Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
! Battery installation
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
" Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
" Keep the remote control away from moisture, heat, shock, and
vibrations.
1
2
Remove the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
Replace the cover.
3
! Test of the remote control
Check the remote control after checking all the connections (see
pages 10 - 12).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
Remote sensor
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
8" - 20'
(0.2 m - 6 m)
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunc-
tion.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
General control
! Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned counterclockwise, the
volume will decrease.
30 MAXIMUM
.....
0
Remote control operation:
Press the VOLUME (+ or -) button to in-
crease or decrease the volume.
! Bass control
When the power is first turned on, the unit
will enter the extra bass mode which em-
phasizes the bass frequencies, and "X-
BASS" will appear. To cancel the extra
bass mode, press the X-BASS/DEMO (X-
BASS) button.
! Equalizer
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
During CD/TUNER/TAPE mode During GAME/VIDEO mode
! To turn the power on
The sound is not
modified.
Bass and treble
are emphasized.
Press the ON/STAND-BY button to turn the power on.
The sound is not
modified.
Bass and treble
are emphasized.
Treble is cut a
little.
Bass is empha-
sized.
Vocals and treble
are emphasized.
Bass and treble are
emphasized more.
FLAT
FLAT
After use:
ROCK
ROCK
Press the ON/STAND-BY button to enter the power stand-by
mode.
CLASSICTreble is cut a little.
CLASSIC
ACTION
SPORTS
RACING
Bass and treble are
POPS
slightly emphasized.
! Illumination light control
When the power is turned on, light illuminates around the display. To
turn on/off the light, hold down the CLEAR/DIMMER button on the
remote control more than 2 seconds.
V o c a l s ( m i d r a n g e
tones) are emphasized.
Treble is slightly
emphasized.
VOCAL
JAZZ
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Setting the clock
5 Press the
or
button to adjust the hour and then
press the MEMORY/SET button.
Press the
or
button once to advance the time by 1
hour. Hold it down to advance continuously.
6 Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
In this example, the clock is set for the 12-hour (AM 12:00) display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
Press the
or
button once to advance the time by 1
minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
or
button to se-
The time display will appear for about 10 seconds.
lect "CLOCK", and press the MEMORY/SET button.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to display the time.
The time display will appear for about 10 seconds.
Note:
4 Press the
or
button to select 12-hour or 24-
The "CLOCK" will appear or time will flash to confirm the time dis-
play when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
hour display and then press the MEMORY/SET button.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour dis-
play) will be skipped.
"AM 12:00"
"AM 0:00"
"0:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
To change the 12-hour or 24-hour display:
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 33 for details.]
Perform "Setting the clock" from step 1.
2
The 24-hour display will appear.
(0:00 - 23:59)
Note:
The clock can also be set with the remote control.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Listening to a CD (CDs)
This system can also play audio CD-R and CD-RW discs, but can-
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
! CD playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the
1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4 Place the CD on the disc tray 1, label side up.
Be sure to place 3" (8 cm) CD in the middle of the disc trays.
5" (12 cm)
3" (8 cm)
5 Press the OPEN/CLOSE button to close the disc tray 1.
Total number of tracks on
the CD whose number is
flashing
Total playing time of the
CD whose number is flash-
ing
"
" will appear.
6 You can place discs on the trays 2 - 5 by following steps
3 - 5.
7 Press the
/
button to start playback.
CD play indicator
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
" Playback will begin from track 1 on the DISC 1. After that disc fin-
ishes playing, the next disc will automatically play.
" After the last track on the fifth disc is played, the CD player stops
automatically.
" When there is no CD in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a CD.
! Various CD functions
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
To exchange other CDs while playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
Stop
Press in the playback
mode.
To remove the CDs:
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
Pause
Press in the playback
mode. Press the
/
Caution:
button to resume play-
back from the paused
point.
" Do not place two CDs in one disc tray.
" Do not play discs with special shapes (heart- or octagon-
shaped). It may cause malfunctions.
Track up/
Track down
Press in the playback
or stop mode.
" Do not push the disc tray while it is moving.
" If the power fails while the tray is open, wait until the power is
restored.
" If the disc tray is stopped with force, "ER-CD20" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
" If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
If you press the button
in the stop mode,
press the
/
button
to start the desired
track.
Fast for-
ward/Fast
reverse
Press and hold down
in the playback mode.
Release the button to
resume playback.
" If a disc is damaged, dirty, or loaded upside down, the disc will be
skipped.
Auto power on function:
When you press any of the following buttons, the unit turns on.
" CD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
Notes:
" Track up/track down and fast forward/fast reverse are possible
only within individual discs.
"
/
button (main unit and remote control): The unit turns on
" When the end of the last track is reached during fast forward, "
END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
(
: Last track number)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Advanced CD playback
! To specify a disc to play
! Direct track search
You can play a disc by specifying the disc number.
By using the direct search buttons, the desired tracks on the current
disc can be played.
1 Press one of the 1 - 5 buttons to select the desired disc.
Use the direct search buttons on
the remote control to select the de-
sired track while playing the se-
lected disc.
Selected track number
Selected disc number
" The direct search buttons allow you to select up to number 9.
2 Within 5 seconds, press the DIRECT PLAY button on the
main unit.
" When selecting number 10 or more, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
" Playback will begin from track 1 on the chosen disc.
" After the last track on the chosen disc is played, the CD player
stops automatically.
If the direct search buttons are pressed while the disc is stopped,
press the
/
button to start the desired track on the current disc.
Notes:
Note:
" A track number higher than the number of tracks on the disc can-
not be selected.
" During random play, direct search is not possible.
If the button of the disc tray with no disc is pressed, playback will not
start and the disc indicator will go out.
To stop playback:
Press the button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
! Repeat play
Repeat play can play all 5 discs, all tracks on a chosen disc, or a
programmed sequence continuously.
! Random play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 5 discs:
To repeat all tracks on up to 5 discs:
Press the RANDOM button on the remote control.
Press the
/
button twice.
To repeat desired tracks:
Perform steps 1 - 6 in the "Programmed play" section on page 20
and then press the
/
button twice.
To cancel random play:
Press the
/
button.
"R" will go out.
To random play all tracks on the chosen disc:
To cancel repeat play:
Press the button again.
" will go out.
/
1 Press one of the 1 - 5 buttons.
"
2 Within 5 seconds, press the DI-
RECT PLAY button.
To repeat all tracks on the chosen disc:
3 Press the RANDOM button on the
remote control.
1 Press one of the 1 - 5 buttons.
To cancel random play:
Press the DIRECT PLAY button.
"R" will go out.
2 Within 5 seconds, press the DIRECT PLAY
button twice.
To cancel repeat play:
Press the DIRECT PLAY button again.
" will go out.
Notes:
" If you press the
button during random play, you can move to
"
the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous
track. The beginning of the track being played will be located.
" In random play, the CD player will select and play tracks automat-
ically. (You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the but-
ton. Otherwise, the disc(s) will play continuously.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Advanced CD Playback (continued)
! Programmed play
You can choose up to 32 selections for playback in the order you
like.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control while the "MEMORY" indicator is
flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
1 While in the stop mode, press the
MEMORY/SET (MEMORY) button
to enter the programming save
mode.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator will disappear and all the programmed contents will be
cleared.
2 Press one of the 1 - 5 buttons
to select the desired disc.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original program.
Selected disc number
3 Press the direct search buttons
on the remote control to select
the desired track.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
Selected track number
or
button.
You can also select a track by pressing the
or
button.
Notes:
4 Press the MEMORY/SET (MEMO-
RY) button to save the track
number.
" When a disc with programmed tracks is ejected, the program is
automatically canceled.
" Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
" During the program operation, random play is not possible.
" During programmed play, the DIRECT PLAY buttons will not
work.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6 Press the button.
The total number of memory will ap-
pear.
7 Press the
/
button to start playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Listening to the radio
! Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3 Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
" When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
" Auto scan tuning will skip weak signal stations.
" To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " " will appear when an FM broadcast is in stereo.
" If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monau-
ral, and the sound becomes clearer.
Auto power on function:
When you press any of the following buttons, the unit turns on.
" TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
"
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
FM stereo mode indicator
FM stereo receiving indicator
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Listening to the radio (continued)
! Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
! To recall a memorized station
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
! To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1 Perform steps 1 - 3 in "Tuning" on page 21.
2 Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
3 Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
! To erase entire preset memory
When a new station is stored in memory, the station previously
memorized will be erased.
1
2
Press the ON/STAND-BY button to enter the stand-by mode.
While pressing down the button and the X-BASS/DEMO but-
ton, press the CLOCK/TIMER button until "TUNER CL" appears.
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord disconnection.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Listening to a cassette tape (TAPE 1 or TAPE 2)
! Tape playback
Before playback:
" For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO tapes are not recom-
mended.)
1 Press the ON/STAND-BY button to turn the power on.
2 Open the cassette com-
partment by pushing the
area marked " ".
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
3 Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac-
ing towards you.
TAPE 1
TAPE 2
4 Press the TAPE (1 2) button to select the cassette you
want to listen to.
5 Press the
playback.
/
to start
Tape play indicator
Auto power on function:
When you press any of the following buttons, the unit turns on.
" TAPE (1 2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
"
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Recording on a cassette tape
! Various tape functions
Before recording:
" When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
Function
Main unit
Remote
control
Operation
" SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
Play
Press in the stop
mode.
" The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
Stop
Press in the playback,
fast forward or fast re-
wind mode.
" For recording, use only normal tapes. Do not use metal or
CrO tapes.
Fast for-
ward/Fast
rewind
Press in the playback
or stop mode.
Erase-prevention tab of cassette tapes:
" When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
(TAPE 2 only)
" To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Caution:
Side A
" To remove the cassette, press the button, and then open the
compartment.
" Before changing from one tape operation to another, press the
button.
" If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
Tab for side A
Tab for side B
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
! Recording from a CD (CDs)
You can record the desired CD using the DIRECT PLAY button.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the
button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired disc.
6 Within 5 seconds, press the DIRECT PLAY button to start
recording.
" Recording is started from the selected CD. When the play-
back of the last track is finished or the end of the tape is
reached, the CD and the cassette will stop automatically.
" CD playback will start approximately 7 seconds after the
tape starts.
To stop recording:
Press the button.
The CD and tape will stop.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Recording on a cassette tape (continued)
Recording from several CDs continuously:
! Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1 Perform steps 1 - 5 in "Recording from a CD (CDs)" on page 25.
2 Within 5 seconds, press the
/
.
1 Press the ON/STAND-BY button to turn the power on.
To perform programmed recording:
2 Load
a
prerecorded cassette
1 Program discs and tracks. (See page 20.)
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
2 Press the
3 Press the
button.
.
/
To stop recording:
Press the button.
The CD and tape will stop.
It is recommended that the recording tape is the same length as
the master tape.
3 Press the TAPE (1 2) button until "TAPE 1" appears on
the display.
! Recording from the radio
1 Tune in to the desired station. (See page 21.)
4 Press the
button.
2 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Recording will be paused.
Wind past the leader of the tape, on which recording cannot be
performed.
5 Press the
/
button to start dubbing.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
3 Press the
button.
Recording will be paused.
! Erasing recorded tapes
4 Press the
/
button to start recording.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
Press the TAPE (1 2) button until "TAPE 2" appears on the dis-
play.
To interrupt recording:
2
Press the
button.
To resume recording, press the
/
button.
3
4
Press the
Press the
button.
button to start erasing.
/
To stop recording:
Press the button.
Note:
Make sure that the TAPE 1 is not in use.
Note:
If you hear a whistling noise while recording an AM station, move
the AM loop antenna.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Timer and sleep operation
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at
the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play and once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a ra-
dio station.
! Timer playback or timer recording
Before setting timer:
Daily timer: Daily timer play and daily timer recording works at
1 Check that the clock is set to the correct time (refer to page 15).
If it is not set, you cannot use the timer function.
the same preset time everyday.
For example, set the timer as a wake up call every morning.
2 For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the cas-
sette compartment.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer as an alarm clock.
1
2
Set the daily timer (pages 27 - 29).
Set the once timer (pages 27 - 29).
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
1 minute or more
Daily timer
3
Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY/SET button.
or
button to select
Once timer
Start
Note:
Stop
Start
Stop
Set the unit to the correct time if "ONCE" or "DAILY" does not
appear.
When the setting times for the daily timer and once timer overlap,
the once timer takes priority. Allow an interval of at least 1 minute
between operations.
Continued to the next page
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Timer and sleep operation (continued)
4 Within 10 seconds, press the
or
button to se-
9 Switch input with the
or
button, and then
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
" When you select the tuner, select a station by pressing the
5 Press the
or
button to select "PLAY" or
or
button, and then press the MEMORY/SET
button.
"REC", and press the MEMORY/SET button.
" If a station has not been programmed, " NO P.SET" will be
displayed and timer setting will be canceled.
White
Red
10Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
The illustrations show the daily timer setting.
11Press the ON/STAND-BY button to enter the power stand-
by mode.
6 Press the
or
button to adjust the hour and
then press the MEMORY/SET button.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
The illustrations show the timer playback setting in the daily tim-
er mode.
7 Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
8 Set the time to finish as in steps 6 and 7 above.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Checking the timer setting in the timer stand-by mode:
12When the preset time is reached, playback or recording will
start.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
The volume will increase gradually until it reaches the preset
volume.
3 Within 10 seconds, press the or button to select
"ONCE CAL" or "DAILY CAL", and press the MEMORY/SET but-
ton.
The unit returns to the timer stand-by mode after displaying the
settings in order.
13When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
Canceling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
The timer will operate at the same time every day. It will contin-
ue until the daily timer setting is canceled. Cancel the daily timer
when it is not used.
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET but-
ton.
Timer will be canceled (the setting will not be canceled).
Note:
When performing timer playback or recording using another unit con-
nected to the GAME INPUT jacks, select "GAME" in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE ON" or "DAILY ON", and press the MEMORY/SET button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
Note:
The timer can also be set with the remote control.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Timer and sleep operation (continued)
To cancel the sleep operation:
! Sleep operation
The radio, compact disc and cassette tape can all be turned off
automatically.
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
1
2
While "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the or button to select
"SLEEP OFF", and press the MEMORY/SET button.
or
button to select
"SLEEP", and press the MEMO-
RY/SET button.
! To use timer and sleep operation together
Sleep and timer playback:
4 Press the
or
button to select the time.
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
(Maximum: 3 hours - Minimum: 1 minute)
" 3 hours - 5 minutes 5-minute intervals
" 5 minutes - 1 minute 1-minute intervals
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programs while sleeping.
5 Press the MEMORY/SET but-
ton.
1
2
Set the sleep time (see left, steps 1 - 5).
"SLEEP" will appear.
While the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 27 - 28).
6 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
Timer playback or
The volume will be turned down 1 minute before the sleep op-
eration finishes.
recording setting
Sleep timer setting
End time
Desired time
To confirm the remaining sleep time:
1 minute - 3 hours
1
2
While "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the
"SLEEP X : XX".
"X : XX" is sleep remaining time.
or
button to select
Sleep operation will
automatically stop.
Timer playback or recording
start time
" The remaining sleep time is displayed for about 10 seconds.
" You can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Enhancing your system
The connection cord is not included. Purchase a commercially avail-
able cord as shown below.
! Listening to playback sounds of Game, VCR,
DVD, etc.
1 Connect a video game system, VCR, DVD, etc. to the front
GAME INPUT (VIDEO, AUDIO L and R) jacks.
GAME or VCR, DVD, etc.
2 Connect a TV to the rear VIDEO OUT jack.
Switch the TV input to auxiliary.
To the line output jacks
3 Press the ON/STAND-BY button to turn the power on.
4 Press the GAME/VIDEO button.
5 Play the connected equipment.
White
Yellow
You can enjoy sounds from the supplied speakers and images
on the TV.
Yellow White Red
Red
Note:
To prevent noise interference, place the unit away from the television.
RCA cord
(not supplied)
Video cable
(not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on.
" GAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
"
/
button (main unit and remote control): The unit turns on and
playback of the last function starts (CD/TAPE/TUNER/GAME).
! To record on a tape from Game, VCR etc.
1 Insert a cassette in the TAPE 2 cassette compartment.
2 Press the GAME/VIDEO button.
TV
To video
input jack
3 Press the
4 Press the
button.
button.
Yellow
/
5 Play the game system, VCR, etc.
Video cable
(not supplied)
Yellow
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Troubleshooting chart
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorized SHARP dealer or service center.
! Headphones
" Before plugging in or unplugging the headphones, reduce the vol-
ume.
" Be sure your headphones have a 1/8" (3.5 mm) diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
! General
" Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
Symptom
" The clock is not set to the " Did a power failure occur? Reset
correct time. the clock. (Refer to page 15.)
" When a button is pressed, " Set the unit to the power stand-
Possible cause
the unit does not respond.
by mode and then turn it back on.
" If the unit still malfunctions, reset
it. (Refer to page 33.)
" No sound is heard.
" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires discon-
nected?
! CD player
Symptom
Possible cause
" Playback does not start.
" Is the disc loaded upside down?
" Playback stops in the mid- " Does the disc satisfy the stan-
dle or is not performed
properly.
dards?
" Is the disc distorted or
scratched?
" Playback sounds are
skipped, or stopped in the
middle of a track.
" Is the unit located near excessive
vibrations?
" Is the disc very dirty?
" Has condensation formed inside
the unit?
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
! Cassette deck
! Tuner
Symptom
Possible cause
Symptom
Possible cause
" The radio makes unusual " Is the unit placed near the TV or
" Cannot record.
" Is the erase-prevention tab re-
moved?
noises continuously.
computer?
" Is the FM antenna or AM loop an-
tenna placed properly? Move the
antenna away from the AC power
cord if it's located nearby.
" Cannot record tracks with " Is it a normal tape? (You cannot
proper sound quality.
" Cannot erase completely.
" Sound skipping.
record on a metal or CrO tape.)
" Is there any slack?
" Is the tape stretched?
! If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
" Cannot hear treble.
" Are the capstans, pinch rollers,
or heads dirty?
" Sound fluctuation.
" Cannot remove the tape. " If a power failure occurs during
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
If such a problem occurs, do the following:
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
force.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
! Remote control
Symptom
Possible cause
! Clearing all the memory (reset)
" The remote control does " Is the AC power cord of the unit
not operate.
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
plugged in?
" Is the battery polarity correct?
" Are the batteries dead?
2
While pressing down the
ton, press the
appears.
button and the X-BASS/DEMO but-
PRESET button until "CLEAR AL"
" Is the distance or angle incor-
rect?
" Does the remote control sensor
receive strong light?
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD program.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Maintenance
! Cleaning the tape-handling parts
! Condensation
" Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
B
C
A
TAPE 1
! Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
E
B
C
D
TAPE 2
! Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
Playback head
Capstan
Pinch roller
Erase head
Recording/Playback head
" Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
" Keep your discs away from direct sunlight, heat, and excessive
moisture.
" Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the center, along the radius.
" After long use, the deck's heads and capstans may become mag-
netized, causing poor sound. Demagnetize these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetizer. Read the demagnetizer's instructions
carefully before use.
! Cleaning the CD pickup lens
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be per-
formed periodically. Lens cleaners are commercially available. Con-
tact your local CD software dealer for options.
NO
YES
Correct
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
" Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.
"
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ES600
CD-ES66
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! Tuner
Frequency range
FM: 87.5 - 108.0 MHz
AM: 530 - 1,720 kHz
! General
! Cassette deck
Power source
AC 120 V, 60 Hz
108 W
Frequency re-
sponse
50 - 14,000 Hz (normal tape)
Power consump-
tion
Signal/noise ratio
55 dB (TAPE-1 playback)
50 dB (TAPE-2 recording/playback)
0.3 % (WRMS)
Dimensions
Width: 10-1/4" (260 mm)
Height: 13" (330 mm)
Depth: 12-7/8" (326 mm)
Wow and flutter
Weight
17.2 lbs. (7.8 kg)
! Speaker
! Amplifier
Type
2-way type speaker system
with passive radiator
Output power
120 watts minimum RMS per channel into 6
ohms from 100 Hz to 20 kHz, 10% total har-
monic distortion
2" (5 cm) tweeter
Output terminals
Speakers: 6 ohms
5-1/8" (13 cm) woofer
4" (10 cm) passive radiator
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Maximum input
power
240 W
Video output: 1Vp-p
Input terminals
Game/Auxiliary (audio signal):
500 mV/47 k ohms
Game/Video: 1Vp-p
Rated input power 120 W
Impedance
Dimensions
6 ohms
Width: 9-7/8" (252 mm)
Height: 13" (330 mm)
! CD player
Depth: 9-13/16" (249 mm)
Type
5-disc multi-play compact disc player
Weight
7.9 lbs. (3.6 kg)/each
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
1-bit D/A converter
20 - 20,000 Hz
Frequency re-
sponse
Dynamic range
90 dB (1 kHz)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original con-
tainer, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof
with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in
design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING
THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any
warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
CD-ES600/CD-ES66 Mini Component System
(Be sure to have this information available when you need service for your Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from Warranty Coverage (if any): Non-functional accessories, supplies, and consumable items.
Where to Obtain Service:
At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest SharpAuthorized Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and
packaged securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Printed in Malaysia
TINSEA005AWZZ
03M R YT 2
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
|