LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
LC-32D64U
LC-37D64U
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
IMPORTANT : Please read this operation manual before starting operating the equipment.
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
Download from Www.Somanuals.com. All Manuals Search And Download.
LC-32D64U
LC-37D64U
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
• The illustrations and on-screen displays in this operation manual are for
explanation purposes and may vary slightly from the actual operations.
• Menu items that are not selectable are grayed out.
• The examples used throughout this manual are based on the LC-32D64U
model.
• To avoid scratching the frame or screen, please use a soft, lint free cloth
for cleaning. Approved cleaning cloths are available directly from Sharp in
single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800
IMPORTANT:
Model No.:
Serial No.:
To aid reporting in case of loss or theft, please record the
TV's model and serial numbers in the space provided. The
numbers are located at the rear of the TV.
IMPORTANT INFORMATION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING:
The lightning flash with arrow-head
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32D64U/LC-37D64U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
“Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of
mercury. Disposal of these materials may be regulated due to environmental
considerations. For disposal or recycling information, please contact your local
(For U.S.A. only)
Trademarks
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
• Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy
efficiency.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Instructions carefully before
using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully
before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Information
15) Power Sources—This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts—When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
• Outdoor Antenna Grounding — If an outside antenna is
connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against
voltage surges and built-up static charges.
ANTENNA
LEAD IN WIRE
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC — NATIONAL ELECTRICAL CODE
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may
scratch the panel surface.
• Use a soft damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel surface when wiped strongly.)
• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage
the panel surface.
• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base
can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product
on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.
• Selecting the location — Select a place with no direct sunlight and good ventilation.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer's instructions are followed.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 2,073,600 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that
this does not affect the performance of your product.
• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to
the equipment due to lightning and power-line surges.
• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
• To prevent fire, never place any type of candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV
set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• To prevent fire or shock hazard, do not expose this product to dripping
or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
Precautions when transporting the TV
• Be sure to always carry the TV by two people holding it with two hands — one hand on each side of the TV.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
Attaching/Detaching the Stand
Setting the TV on the Wall
• Before attaching (or detaching) the stand, unplug the AC
cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base
area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• This TV should be mounted on the wall with both
the AN-37AG2 (SHARP) wall mount bracket and the
AN-37P30 (SHARP) attachment of the wall mount
bracket. The TV cannot be mounted when with
only the AN-37AG2 wall mount bracket. The use of
other wall mount brackets may result in an unstable
installation and may cause serious injuries.
• Installing the TV requires special skill that should
only be performed by qualified service personnel.
Customers should not attempt to do the work
themselves. SHARP bears no responsibility for
improper mounting or mounting that results in
accident or injury.
CAUTION
• Attach the stand in the correct direction.
• Do not remove the stand from the TV unless using an
optional wall mount bracket to mount it.
• Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
1 Confirm that there are 9 screws supplied with the
stand unit.
Using an optional bracket to mount the TV
•
You can ask a qualified service professional about
using an optional AN-37AG2 bracket to mount the TV
to the wall.
2 Attach the supporting post for the stand unit onto
• Carefully read the instructions that come with the
bracket before beginning work.
the base using the box for the stand unit as shown
below.
Screws
Hanging on the wall
AN-37AG2 wall mount bracket.
(See the bracket instructions for details.)
Hex key
3
2
1
Vertical mounting
Angular mounting
About setting the TV angle
1
2
3
Insert the stand into the openings on the bottom
of the TV.
LC-32D64U
• The center of the display:
Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
11
/
16 inch (17.3 mm) under
the “A” position.
2
Hex key
Screws
LC-37D64U
• The center of the display:
1 3 4 inch (44.1 mm) under
/
the “A” position.
• Refer to the operation
manual of AN-37P30 for
details.
Soft cushion
• Detach the cable clamp on the rear of the TV when using
the optional mount bracket.
1
• Due to the terminal configuration on this TV, when you
wall-mount this model, make sure there is enough space
between the wall and the TV for the cables.
• To use this TV mounted on a wall, first remove the
adhesive tape at the 4 locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket
to secure the bracket to the rear of the TV.
• To detach the stand, perform the steps in reverse order.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
QUICK INSTALLATION TIPS
Place the Ferrite core in the space indicated in the
below figure and bundle the cords properly with
the cable clamp and the cable tie.
Attach your antenna to the back of the AQUOS
3
1
television. (See page 7.)
Connect the AC plug for the AQUOS television into
the AC outlet.
2
Ferrite core
How to turn on the AQUOS television for the first time.
A) Press POWER on the AQUOS television.
4
POWER
AC outlet
• Place the TV close to the AC outlet, and keep the power
plug within reach.
B) The POWER indicator on the front of the
AQUOS television lights GREEN.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
POWER
indicator
• Speakers cannot be detached from the TV.
• TV angle cannot be adjusted.
Using the Remote Control Unit
Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may prevent proper operation.
Cautions regarding the remote control unit
■
• Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.
• The remote control unit may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
Remote Control sensor
30º
30º
17´ (5 m)
30º
30º
IMPORTANT:
The POWER indicator on the AQUOS television should light GREEN indicating you have power to the AQUOS television.
If the POWER indicator on the AQUOS television still does not light up, press TV POWER on the remote control to turn the
power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the TV set.
F-type connector
1.A 75-ohm system is generally a round cable with F-type connector
that can easily be attached to a terminal without tools (Commercially
available).
75-ohm coaxial cable (round)
2.A 300-ohm system is a flat “twin-lead” cable that can be attached
to a 75-ohm terminal through a 300/75-ohm adapter (Commercially
available).
300-ohm twin-lead cable (flat)
NOTICE
F-type connector should be finger-tightened only.
F-type connector
When connecting the RF cable to the TV set, do not tighten F-type
connector with tools.
If tools are used, it may cause damage to your TV set. (The breaking
of internal circuit, etc.)
75-ohm coaxial cable
Connecting Antenna
Cable
• Connect the antenna cable to the TV using one of the methods in the illustration as shown (
,
,
or
).
4
1 2 3
Home Antenna
terminal (75-ohm)
Cable TV lead-In
Cable without a CATV
converter
1
2
Coaxial cable
(commercially available)
Home Antenna
terminal (75-ohm)
VHF/UHF antenna
75-ohm coaxial cable (round)
75-ohm coaxial cable (round)
Coaxial cable
(commercially available)
Combination VHF/
UHF antenna
3
or
300/75-ohm adapter
(commercially available)
300-ohm twin-lead cable (flat)
VHF
ANTENNA
UHF
ANTENNA
Separate VHF/UHF
antenna
4
300-ohm
twin-lead cable
IN
OUT
300-ohm twin-lead cable
75-ohm coaxial cable
Combiner
(commercially available)
or
To TV antenna
terminal
Installing Batteries in the Remote Control Unit
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
1 Open the battery cover.
2 Insert two “AAA” size batteries
(supplied with the product).
3 Close the battery cover.
• Place the batteries with their terminals
corresponding to the ( ) and (
)
e
f
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage
in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a
rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
IMPORTANT INFORMATION ..................................1
Trademarks..............................................................2
DEAR SHARP CUSTOMER .....................................3
IMPORTANT SAFETY INSTRUCTIONS..................3
QUICK REFERENCE................................................5
Attaching/Detaching the Stand ............................5
Setting the TV on the Wall....................................5
QUICK INSTALLATION TIPS................................6
Using the Remote Control Unit ............................6
Preparation ..............................................................7
Antennas .............................................................7
Installing Batteries in the Remote Control Unit......7
Contents...................................................................8
Supplied Accessories..............................................8
Part Names ..............................................................9
TV (Front).............................................................9
TV (Top/Side/Rear) ..............................................9
Remote Control Unit..........................................10
Connecting to External Equipment......................11
Watching TV...........................................................12
Turning On/Off the Power..................................12
Initial Setup........................................................12
Direct Button Operation........................................13
On-Screen Display Menu......................................17
Menu Items .......................................................17
On-Screen Display Menu Operation...................18
Menu Operation Buttons....................................18
Picture Menu .....................................................19
OPC Setting..................................................19
Advanced Picture Setting..............................19
Audio Menu.......................................................20
Surround.......................................................20
Bass Enhancer..............................................20
Power Control Menu..........................................21
No Signal Off.................................................21
No Operation Off...........................................21
Setup Menu.......................................................21
EZ Setup.......................................................21
CH Setup......................................................22
Antenna Setup-DIGITAL................................22
Input Skip......................................................22
Input Label....................................................22
Input Signal (for Analog PC Input Mode Only)...22
Auto Sync.
Fine Sync. ....................................................22
Position.........................................................23
Language......................................................23
Reset ............................................................23
Parental CTRL (Parental Control Setting).......23
Option Menu......................................................26
Audio Only ....................................................26
Digital Noise Reduction .................................26
Input Select...................................................26
HDMI Setup ..................................................26
Output Select................................................26
Color System ................................................26
Caption Setup...............................................27
Digital Caption Info.
(Digital Caption Information) ........................27
Program Title Display ....................................27
Favorite CH (Favorite Channel Setting) ..........27
Game Play Time............................................27
Operation Lock Out.......................................27
Digital Setup Menu ............................................28
Audio Setup..................................................28
Identification..................................................28
Software Update...........................................28
Other Viewing Options..........................................30
Presetting Remote Control Function ..................30
Operating the Connected Equipment.................30
Using AQUOS LINK ...............................................32
Controlling HDMI Equipment Using AQUOS LINK ...32
AQUOS LINK Menu...........................................34
Appendix ................................................................35
Troubleshooting.................................................35
Troubleshooting-Digital Broadcasting ................35
RS-232C Port Specifications .............................36
Specifications ....................................................37
Optional Accessory............................................37
PC Compatibility Chart ......................................38
Information on the Software License for This
Product ...........................................................38
Calling for Service .................................................39
LIMITED WARRANTY............................................39
Dimensional Drawings
• The dimensional drawings for the LCD TV set are shown
on the inside back cover.
(for Analog PC Input Mode Only).................22
Supplied Accessories
Make sure the following accessories are provided with the product.
Remote control unit “AAA” size battery
1) 2)
AC cord
1)
Page 6
Cable clamp ( 1)
Stand unit
1)
Page 5
Operation manual
1)
g
(
(
(
Cable tie ( 1)
(
(
g
g
g
g
g
g
Page 6
Page 7
Page 6
• Always use the AC cord supplied with the TV.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
TV (Front)
Remote control sensor
OPC sensor (See page 19.)
OPC indicator (See page 19.)
SLEEP indicator (See page 13.)
POWER indicator (See page 12.)
TV (Top/Side/Rear)
AC INPUT terminal
Channel buttons
(CHV/U)
MENU button
Volume buttons
(VOL
INPUT button
POWER button
/
)
l k
INPUT 4 terminal (HDMI)
DIGITAL AUDIO OUTPUT
terminal
INPUT 6 terminals (PC-IN)
RS-232C terminal
INPUT 5 terminals (HDMI)
INPUT 3
terminals
Antenna/Cable in
INPUT 2 terminals
INPUT 1 terminals
SERVICE
terminal
AUDIO OUTPUT terminals
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
1
TV POWER: Switch the TV power on or enters standby. (See
page 12.)
Remote Control Unit
2
3
DISPLAY: Display the channel information.
1
16
SOURCE POWER: Turns the power of the external equipment
on and off.
4
External equipment operational buttons: Operate the external
equipment.
5
6
7
0–9: Set the channel. (See page 13.)
2
3
• (DOT): (See pages 13 and 30.)
17
18
INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 3,
INPUT 4, INPUT 5, INPUT 6) (See page 13.)
4
8
9
VOL
/
: Set the volume. (See page 13.)
k l
SURROUND: Select Surround settings. (See page 13.)
10 FREEZE: Set the still image. Press again to return to normal
screen. (See page 13.)
5
11 EXIT: Turn off the menu screen.
12 OPTION: Display the AQUOS LINK MENU screen. This button
will function only when AQUOS LINK is used. (See pages 32 to 34
for details.)
19
20
6
7
13 REC STOP: Stops one touch recording. This button will function
only when AQUOS LINK is used. (See pages 32 to 34 for details.)
14 SLEEP: Set the sleep timer. (See page 13.)
21
22
8
9
15 AUDIO: Selects the MTS/SAP or the audio mode during multi-
channel audio broadcasts. (See page 14.)
16 FUNCTION: Switches the remote control for TV, CBL/SAT, VCR,
DVD and AUDIO operation. Indicator lights up for the current
mode. (See pages 30 to 31 for details.)
23
24
10
* To enter the code registration mode, you need to press
FUNCTION and DISPLAY at the same time.
17 LIGHT : When this button is pressed, some buttons (for
D
11
25
26
example, VOL
/
and CH ) on the remote control unit will
/
k l
r s
light. The lighting will turn off if no operations are performed within
about 5 seconds. This button is used for performing operations in
low-light situations.
12
13
27
28
18 VIEW MODE: Select the screen size. (See page 16.)
19 ENT: Jumps to a channel after selecting with the 0–9 buttons.
20 FLASHBACK: Return to the previous channel or external input
14
15
mode. (See page 13.)
21 CH : Select the channel. (See page 13.)
/
r s
29
22 MUTE: Mute the sound. (See page 13.)
23 MENU: Display the menu screen.
24
/
/
/
,ENTER: Select a desired item on the screen.
a b c d
25 RETURN: Return to the previous menu screen.
26 FAVORITE CH
A, B, C, D: Select 4 preset favorite channels in 4 different
categories. (See page 27.)
While watching, you can toggle the selected channels by pressing
A, B, C and D.
27 FAVORITE: Set the favorite channels. (See page 27.)
28 CC: Display captions from a closed-caption source. (See page
15.)
29 AV MODE: Select an audio or video setting.
(When the input source is TV, INPUT 1, 2 or 3: STANDARD,
MOVIE, GAME, USER, DYNAMIC (Fixed), DYNAMIC. When the
input source is INPUT 4, 5 or 6: STANDARD, MOVIE, GAME, PC,
xvYCC (INPUT 4/5 only), USER, DYNAMIC (Fixed), DYNAMIC) (See
page 14.)
• When using the remote control unit, point it at the TV.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Equipment
You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD
player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images,
select the input source from INPUT on the remote control unit or on the TV. (See page 13.)
CAUTION
• To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting a Blu-ray disc player, HD-DVD player, DVD player, Digital TV STB (Air or Cable), VCR,
game console or camcorder
Terminal on external
Terminal on the TV
INPUT 1, 2 or 3
Cable
equipment
AV cable (commercially available)
INPUT 1 or 3
*1
*2
Component video cable (commercially available)
Audio cable (commercially available)
INPUT 2
S-VIDEO cable (commercially available)
Audio cable (commercially available)
INPUT 4 or 5
*3
*4
HDMI-certified cable (commercially available)
Optical fiber cable (commercially available)
DIGITAL AUDIO
OUTPUT
*1 • To enjoy the AQUOS 1080p display capability, connect your external equipment using a component cable and set the
equipment to 1080p output.
*2 • The S-VIDEO terminal takes priority over the video terminals. (INPUT 2 only)
*3 • When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5.
• To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external
equipment using an HDMI-certified cable and set the equipment to 1080p output.
*4 • Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz and 16 bits.
Connecting a PC
Terminal on the TV
INPUT 6
Terminal on PC
Cable
RGB cable (commercially available)
Ø 3.5 mm stereo minijack cable (commercially available)
INPUT 4 or 5
HDMI-certified cable (commercially available)
• The HDMI terminals only support digital signal.
• Refer to page 38 for a list of PC signals compatible with the TV.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Turning On/Off the Power
Press POWER on the TV, or TV POWER on the remote control unit to
turn the power on.
• POWER indicator (Green): The TV is on. (After a few seconds, a window
appears with sound.)
POWER
• The initial setup starts when the TV powers on for the first time. If the TV has
been turned on before, the EZ Setup will not be invoked. See page 21 for
performing EZ Setup from the Setup menu.
TV POWER
(On/Standby)
Press POWER on the TV, or TV POWER on the remote control unit
again to turn the power off.
• The TV enters standby and the image on the screen disappears.
• The POWER indicator on the TV turns off.
• If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.
Initial Setup
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
When you turn on the TV for the first time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press TV POWER on the
remote control unit.
1. Insert the batteries into the remote control unit. (See page 7.)
2. Connect the antenna cable to the TV. (See page 7.)
3. Plug in the AC cord to the AC outlet. (See page 6.)
Press
/
to select "Air" or "Cable".
c d
3
Press ENTER to enter the setting.
Example
Language
TV Location
Air/Cable
CH Search
Air
Cable
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
When "Air" is selected in Antenna setting:
Press
/
to select the desired language listed on the
a b
4
1
Press
/
to select "Start", and then press ENTER.
c d
screen, and then press ENTER.
Language
TV Location
Air/Cable
Language
TV Location
Air/Cable
English
Français
Español
CH Search
CH Search
Start
Cancel
When "Cable" is selected in Antenna setting:
Press
TV Location
/
to select "Analog & Digital Search Start" to
a b
Select "Home" or "Store" for the location where you plan to
install the TV.
search both analog and digital broadcasts, or to select
“Analog Search Start” to search only analog broadcasts,
and then press ENTER.
Press
/
to select "Home" or "Store".
c d
2
Press ENTER to enter the setting.
Language
Example
TV Location
Language
TV Location
Air/Cable
CH Search
Home
Air/Cable
Analog & Digital Search Start
Analog Search Start
Cancel
CH Search
Store
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel", and
then press ENTER.
• If you select "Home", AV MODE is set to "STANDARD".
• If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".
In case no remote control signal is received within 30 minutes,
AV MODE will change to "DYNAMIC (Fixed)" automatically.
• For changing the TV Location after the setting, see "EZ
Setup" on page 21.
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again.
(See page 21.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Button Operation
Sleep Timer
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
•
The remaining time displays when the sleep timer has been set.
• Each time you press SLEEP, the remaining time switches
as shown below.
Off
30
60
90
120
• When set, the time automatically starts counting down.
• If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
• Five minutes before the time expires, the remaining time
displays every minute.
Changing Channels
/
r s
You can change channels by pressing CH
or 0-9,
• Select "Off" by pressing SLEEP to cancel the sleep timer.
•
•
The TV will enter standby when the remaining time reaches zero.
When the sleep timer is set, its indicator on the TV lights red.
• (DOT).
Examples:
To select a 1 or 2-digit channel number (e. g., Channel 5):
FLASHBACK
Press 5
To select a 3-digit channel number (e. g., Channel 115):
Press 1 ENT.
To select a 4-digit channel number (e. g., Channel 22.1):
Press 2 • (DOT) ENT.
ENT.
Press FLASHBACK to switch to the previously tuned
channel.
1
5
• Press FLASHBACK again to switch back to the currently
tuned channel.
2
1
• FLASHBACK will not work if no channel has been changed
after the TV is turned on.
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
• If you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
SURROUND
The surround function produces Surround effect from
the speakers. Each time you press SURROUND, the
mode changes between On and Off.
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
Changing Volume
You can change the volume by pressing VOL
/
on
k l
• You can have the same settings by choosing "Surround" on
the menu items. (See page 20.)
the TV or on the remote control unit.
• To increase the volume, press VOL
• To decrease the volume, press VOL
.
k
.
l
FREEZE
20
Allows you to capture and freeze a moving image that
you are watching.
Audio status
Press FREEZE.
• A moving image is captured.
Output Select
Output device
Speaker
• Press FREEZE again to cancel the function.
Fixed
Variable
Variable sound
Mute
• When this function is not available, "No displaying still
image available." will display.
• The still image automatically goes out after 30 minutes.
• If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
canceled and a V-CHIP BLOCK message will appear.
• When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.
60
• See page 26 for details on the Output Select function.
INPUT
MUTE
To view external source images, select the input source
using INPUT on the remote control unit or on the TV.
Mutes the current sound output.
Press INPUT.
Press MUTE.
1
• A list of selectable sources appears.
• "
" will be displayed on the screen for 30 minutes, and
the sound is silenced.
Press INPUT again or press
input source.
/
to select the
a b
2
•
An image from the selected source automatically displays.
• Within 30 minutes of pressing MUTE, mute can be
• Each time INPUT is pressed, the input source toggles.
•
canceled by using one of the methods below.
If the corresponding input is not plugged in, you cannot change
the input. Be sure to connect the equipment beforehand.
- Mute will be canceled if you press VOL or MUTE.
/
k l
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
• See page 11 for external equipment connection.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Button Operation
AV MODE
AUDIO
AV MODE gives you 8 viewing options to choose from
to best match the surrounding environment of the TV,
which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
MTS/SAP stereo mode
■
The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS). The TV
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.
Press AV MODE. Current AV MODE displays.
• Press AV MODE again before the mode displayed on the
screen disappears. The mode changes as shown below:
Example:
When the input source is TV, INPUT 1, 2 or 3 terminals
You can enjoy Hi-Fi stereo sound or SAP broadcasts
where available.
• Stereo broadcasts: View programs like live sporting
events, shows and concerts in dynamic stereo sound.
• SAP broadcasts: Receive TV broadcasts in either MAIN or
SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
STANDARD
DYNAMIC
Example:
MOVIE
GAME
USER [TV]
DYNAMIC (Fixed)
When the input source is INPUT 4, 5 or 6 terminals
STANDARD
MOVIE
GAME
PC
xvYCC*
DYNAMIC
DYNAMIC (Fixed)
USER[
]
* "xvYCC" can only be selected when an xvYCC signal is
input using INPUT 4 and 5.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
STANDARD: For a highly defined image in a normal
lighting.
You can change MTS as shown below to match the television
broadcast signal.
[Enhanced Picture Contrast: on]
MOVIE: For a movie.
[Enhanced Picture Contrast: off]
GAME: Lowers image brightness for easier viewing.
[Enhanced Picture Contrast: off]
PC: For PC.
[Enhanced Picture Contrast: off]
Press AUDIO to toggle between audio modes.
Examples: when receiving MTS and SAP
STEREO
MONO
STEREO mode:
STEREO + SAP mode:
ST(SAP) SAP(ST)
MONO
xvYCC: Supports the xvYCC international standard
for wide color space. The xvYCC signal allows you
to experience colors that conventional color signals
cannot reproduce.
MAIN
MONO mode: MONO
SAP
MAIN + SAP mode:
Digital broadcasting audio mode
■
[Enhanced Picture Contrast: off]
The types of audio transmitted in a digital broadcast include
SURROUND as well as MONO and STEREO. In addition, it
is possible for multiple audio tracks to accompany a single
video track.
USER: Allows the user to customize settings as desired.
You can set the mode for each input source.
[Enhanced Picture Contrast: off]
DYNAMIC (Fixed): Changes the image and sound
settings to the factory preset values. No adjustments
are allowed.
Press AUDIO to toggle between audio modes.
[Enhanced Picture Contrast: on]
Example: when receiving Digital broadcasting
STEREO (Audio1)
STEREO (Audio2)
DYNAMIC: For a clear-cut image emphasizing high
contrast, useful for sports viewing.
[Enhanced Picture Contrast: on]
SURROUND (Audio3)
• MTS only operates while in TV mode.
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
• When you play games, "GAME" is recommended for AV
MODE.
• "Enhanced Picture Contrast" technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Button Operation
Closed Captions and Digital Closed Captions
Press CC.
Your TV is equipped with an internal Closed Caption
decoder. It allows you to view conversations, narration
and sound effects as subtitles on your TV. Closed
Captions are available on some TV programs and on
some VHS home video tapes at the discretion of the
program provider.
1
2
• This will present the Closed Caption information
display.
Press CC while the Closed Caption information is
still on the screen.
• Press repeatedly until you select the desired closed
caption service.
Digital Closed Caption service is a new caption service
available only on digital TV programs (also at the
discretion of the service provider). It is a more flexible
system than the original Closed Caption system,
because it allows for a variety of caption sizes and font
styles. When the Digital Closed Caption service is in
use, it will be indicated by the appearance of a 3-letter
abbreviation that also indicates the language of the
Digital Closed Captions: ENG (English), SPA (Spanish),
FRA (French) or other language codes.
Air
ANALOG
2
Audio
CC
Ratings
:
:
:
MONO
1/2 CC1
NONE
Closed Caption
information
• Depending on the number of caption services in the
signal being received, you will see information such as
1/2 or 1/4 displayed.
1/2 means “the first of two services”.
Example:
Not all programs and VHS videotapes offer closed
captions. Please look for the “
that captions will be shown.
” symbol to ensure
N
If a program has three services (Digital CC(ENG), CC1
and Text1), the closed caption display will toggle in this
sequence:
In the Closed Caption system, there can be more than
one caption service provided. Each is identified by its
own number. The “CC1” and “CC2” services display
subtitles of TV programs superimposed over the
program's picture.
1/3 ENG
2/3 CC1
3/3 Text1
Off
• The CC button keeps a record of the last service
selected in its memory.
If the last closed caption mode (e.g. 1/3ENG) you
selected is not available for the next program, or on
another channel, the closed caption service that is
available is automatically selected, and this service
appears in parentheses, e.g. “1/3(CC1)”.
Closed Caption services that appear in parentheses will
not be stored in the CC button's memory as your last
selected service. Only services that you have selected
with the CC button are stored.
In the Closed Caption system, the “Text1” or “Text2”
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed over the program currently
being viewed.
Examples:
In a case where there are two closed caption
services provided (for instance, Digital CC(ENG)
and CC1), and Digital CC(ENG) is displayed
as your current selection, if Digital CC(ENG) is
not broadcast for the next program, the other
closed caption service, CC1, will be displayed in
parentheses.
A closed caption service appears in parentheses
because the service you selected is not available
and a different service is displayed on your screen.
“1/1(CC1)” is displayed instead of “1/2/ENG”.
• See page 27 for detailed closed caption settings.
• When the program contains no closed caption, “--” displays
in the closed caption information.
• If the language code, e.g. “ENG”, is not found on Digital TV
programs, “--” will be shown.
• Four kinds of closed caption service (CC1, CC2, Text1,
Text2) are potentially available, but a broadcast may contain
none or only some of these services at the discretion of the
program provider.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Button Operation
VIEW MODE
You can select the screen size.
Press VIEW MODE.
• The View Mode menu displays.
1
• The menu lists the View Mode options selectable for the type of video signal currently being received.
Press VIEW MODE or
/
while the View Mode menu is displayed to select a desired item on the menu.
a b
2
• You can sequentially select a View Mode that has its own aspect ratio.
For 4:3 programs
■
Example: Screen size images
Side Bar
S.Stretch (Smart stretch)
Zoom
Stretch
Suitable for viewing
conventional 4:3 programs in programs to fill the screen.
their normal format.
Suitable for stretching 4:3
Suitable for viewing wide-
screen 2.35:1 anamorphic
DVDs in full screen.
This mode is useful for 1.78:1
DVDs. When viewing 1.85:1
DVDs, stretch mode will still show
very thin black bands at the top
and bottom of the screen.
For HD programs
■
Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at
the top and bottom of the screen.
Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on
the screen.
Full Screen (720p only): You can select "Full Screen" only when receiving a 720p signal.
S.Stretch (Smart stretch): Suitable for stretching 4:3 programs to fill the screen.
Zoom: Suitable for viewing wide-screen 2.35:1 aspect-ratio programs in full screen.
•
When using Dot by Dot, it is possible to see noise or bars around different outer portions of the screen. Please change view
mode to correct this.
For PC input mode
■
• Connect the PC before making adjustments. (See page 11.)
• Selectable screen size may vary with input signal type.
Example: Screen size images
Input signal
Normal
Zoom
Stretch
Dot by Dot
4:3
Keeps the original
aspect ratio in a full
screen display.
For viewing
widescreen
programs. The top
and bottom of the
image is cropped.
An image fully fills the Detects the resolution
screen.
of the signal and
displays an image with
the same number of
pixels on the screen.
Input signal
Stretch
Dot by Dot
16:9
An image fully fills the Detects the resolution
screen.
of the signal and
displays an image with
the same number of
pixels on the screen.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Menu Items
For TV/INPUT 1/2/3 Mode
For HDMI/PC-IN Mode
Picture Menu
Picture Menu
OPC..................................................................................... Page 19
Backlight.............................................................................. Page 19
Contrast .............................................................................. Page 19
Brightness .......................................................................... Page 19
Color ................................................................................... Page 19
Tint ...................................................................................... Page 19
Sharpness .......................................................................... Page 19
Advanced
C.M.S.-Hue ............................................................. Page 19
C.M.S.-Saturation ................................................... Page 19
Color Temp. ............................................................ Page 19
Active Contrast........................................................ Page 19
I/P Setting................................................................ Page 20
Film Mode ............................................................... Page 20
3D-Y/C .................................................................... Page 20
Monochrome ........................................................... Page 20
Range of OPC ......................................................... Page 20
Reset .................................................................................. Page 19
OPC..................................................................................... Page 19
Backlight.............................................................................. Page 19
Contrast .............................................................................. Page 19
Brightness .......................................................................... Page 19
Color ................................................................................... Page 19
Tint ...................................................................................... Page 19
Sharpness .......................................................................... Page 19
Advanced
C.M.S.-Hue ............................................................. Page 19
C.M.S.-Saturation ................................................... Page 19
Color Temp. ............................................................ Page 19
Active Contrast........................................................ Page 19
I/P Setting................................................................ Page 20
Film Mode ............................................................... Page 20
Monochrome ........................................................... Page 20
Range of OPC ......................................................... Page 20
Reset .................................................................................. Page 19
Audio Menu
Audio Menu
Treble ................................................................................. Page 20
Bass..................................................................................... Page 20
Balance................................................................................ Page 20
Surround.............................................................................. Page 20
Bass Enhancer .................................................................... Page 20
Reset .................................................................................. Page 20
Treble ................................................................................. Page 20
Bass..................................................................................... Page 20
Balance................................................................................ Page 20
Surround.............................................................................. Page 20
Bass Enhancer .................................................................... Page 20
Reset .................................................................................. Page 20
Power Control Menu
Power Control Menu
No Signal Off....................................................................... Page 21
No Operation Off................................................................. Page 21
No Signal Off....................................................................... Page 21
No Operation Off................................................................. Page 21
Setup Menu
Setup Menu
EZ Setup.............................................................................. Page 21
CH Setup............................................................................. Page 22
Antenna Setup-DIGITAL...................................................... Page 22
Input Skip ............................................................................ Page 22
Input Label .......................................................................... Page 22
Parental CTRL .............................................................. Pages 23-25
Position................................................................................ Page 23
Language............................................................................. Page 23
Reset ................................................................................... Page 23
Input Skip ............................................................................ Page 22
Input Signal ......................................................................... Page 22
Auto Sync. .......................................................................... Page 22
Input Label .......................................................................... Page 22
Fine Sync. ........................................................................... Page 22
Position................................................................................ Page 23
Language............................................................................. Page 23
Reset ................................................................................... Page 23
Option Menu
Option Menu
AQUOS LINK Setup ..................................................... Pages 32-34
Audio Only........................................................................... Page 26
Digital Noise Reduction....................................................... Page 26
Input Select ......................................................................... Page 26
Output Select ...................................................................... Page 26
Color System....................................................................... Page 26
Caption Setup ..................................................................... Page 27
Digital Caption Info. ............................................................ Page 27
Program Title Display ......................................................... Page 27
Favorite CH ......................................................................... Page 27
Game Play Time .................................................................. Page 27
Operation Lock Out............................................................. Page 27
AQUOS LINK Setup ..................................................... Pages 32-34
Audio Only........................................................................... Page 26
Digital Noise Reduction....................................................... Page 26
HDMI Setup......................................................................... Page 26
Output Select ...................................................................... Page 26
Game Play Time .................................................................. Page 27
Operation Lock Out............................................................. Page 27
Digital Setup Menu
Digital Setup Menu
Audio Setup......................................................................... Page 28
Identification........................................................................ Page 28
Software Update .......................................................... Pages 28-29
Software Update .......................................................... Pages 28-29
• Some menu items may not be displayed depending on the selected input source.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
On-Screen Display Menu Operation
Example
Example
Picture
Option
AQUOS LINK Setup
Audio Only
OPC
Off
On
On : Display
b16
Digital Noise Reduction
Input Select
[Off]
[VIDEO]
[Fixed]
[Auto]
Backlight
Contrast
Brightness
Color
[b12] a16
[b30]
0
b40
b30
b30
b30
b10
Output select
[
[
[
[
0] a30
0] a30
0] a30
b2] a10
Color System
Caption Setup
Tint
Digital Caption Info.
Program Title Display
Game Play Time
Operation Lock Out
Sharpness
Advanced
Reset
[No]
[Off]
[Off]
Item displayed in yellow
1
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this
item.
ENTER
RETURN
MENU
: Select
: Enter
: Back
: Exit
Item in brackets
2
3
4
• This indicates the current setting for the item.
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
Item displayed in white
• This indicates that the item can be selected.
Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
—Nothing is connected to the selected input terminal.
—The function is not compatible with the current input
signal.
Press
Press
Press
/
to select the desired item.
to select the desired item.
to adjust the item.
1
2
3
c d
/
a b
/
c d
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Menu Operation Buttons
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Using the remote control
Use the following buttons on the remote control to
operate the menu.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
MENU:
Press to open or close the menu screen.
VOL
/
: Cursor
/
on the remote control.
on the remote control.
l k
c d
/
/
/
:
Press to select a desired item on the screen or
adjust a selected item.
a b c d
CH /
s r
: Cursor
/
b a
ENTER:
Press to go to the next step or complete the
setting.
INPUT: ENTER on the remote control.
RETURN:
Press to return to the previous step.
MENU: MENU on the remote control.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
OPC Setting
Picture Menu
Automatically adjusts the brightness of the screen.
Off: The brightness is fixed at the value set in "Backlight".
On: Automatically adjusts.
Adjusts the picture to your preference with the
following picture settings.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
Example
Picture
• When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
• When set to "On" or "On: Display", the OPC indicator on
the TV lights green.
OPC
Off
On
On : Display
b16
Backlight
Contrast
Brightness
Color
[b12] a16
[b30]
0
b40
b30
b30
b30
b10
[
[
[
[
0] a30
0] a30
0] a30
b2] a10
Tint
Advanced Picture Setting
This TV provides various advanced functions for
optimizing the picture quality.
Sharpness
Advanced
Reset
C.M.S.
(Color Management System)
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
Press MENU to display the MENU screen, and then
1
2
press
Press
/
to select "Picture".
c d
/
to select a specific adjustment item.
a b
• For resetting all adjustment items to the factory preset
• Select "Advanced" and then press ENTER to set
"C.M.S. -Hue", "C.M.S.-Saturation", "Color Temp.",
"Active Contrast", "I/P Setting", "Film Mode", "3D-Y/C",
"Monochrome" or "Range of OPC".
values, press
ENTER.
/
to select "Reset", and then press
a b
Color Temp.
(Color Temperature)
Press
/
(or
/
) to select the desired setting,
a b c d
3
4
and then press ENTER.
For a better white balance, use color temperature
correction.
Press MENU to exit.
High:
White with bluish tone
Selected item
button
button
d
c
Mid-High:
Middle:
Mid-Low:
Low:
Backlight
The screen dims
The screen
brightens
For more contrast
For more
brightness
For more color
intensity
Skin tones
become greenish
For more
sharpness
Contrast
Brightness
For less contrast
For less
brightness
For less color
intensity
Skin tones
become reddish
For less
White with reddish tone
Active Contrast
Color
Automatically adjusts the image contrast according to
the scene.
Tint
On: Automatically adjusts the image contrast.
Off: No adjustment.
Sharpness
sharpness
• For resetting all Picture adjustment items to the factory
preset values, press to select "Reset", press ENTER,
/
a b
press
/
to select "Yes", and then press ENTER.
c d
19
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
I/P Setting
Audio Menu
You can adjust the sound quality to your preference
with the following settings.
Converts input signals depending on the type of
images.
Fast: Suitable for fast-moving images
Slow: Suitable for smooth images with low amounts of
Example
flickers
Audio
• "I/P Setting" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
Treble
[ 0]
[ 0]
[ 0]
a15
a15
L
b15
b15
R
Film Mode (3:2 pull-down)
Bass
Balance
Surround
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
[Off]
[On]
Bass Enhancer
Reset
On: Detects, analyzes, converts film source.
Off: Normal viewing mode.
• "Film Mode" does not function when you set the "AV Mode"
to "Game".
• "Film Mode" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Press MENU to display the MENU screen, and then
1
2
Slow: For still images.
press
Press
/
to select "Audio".
c d
Standard: Normal adjustment.
Fast: For moving images.
Off (2D): For Game Mode.
/
to select a specific adjustment item.
a b
• Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item.
Press
/
(or
/
) to select the desired setting,
a b
c d
3
4
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
and then press ENTER.
Press MENU to exit.
Monochrome
Selected item
Treble
button
button
d
c
For viewing a video in monochrome.
For weaker treble For stronger treble
For weaker bass For stronger bass
Decrease audio from Decrease audio from
On: For viewing in monochrome.
Off: Normal color.
Bass
Balance
Range of OPC
the right speaker the left speaker
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of –16.
Max.: –15 through +16
•
Audio menu is grayed out when Output Select is set to "Variable".
• For resetting all Audio adjustment items to the factory
preset values, press to select "Reset", press ENTER,
/
a b
press
/
to select "Yes", and then press ENTER.
c d
Min.: –16 through +15
Surround
Surround function allows you to enjoy realistic "live" sound.
• The range of OPC settings are active only when the OPC is
set to "On".
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
On: Surround function is on.
Off: Normal sound.
• You can choose Surround by pressing SURROUND on the
remote control unit. (See page 13.)
•
•
Audio menu is grayed out when Output Select is set to "Variable".
For some discs, setup may be required on your DVD player. In this
case, please refer to the operation manual of your DVD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
•
Audio menu is grayed out when Output Select is set to "Variable".
20
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Power Control Menu
Setup Menu
Power control setting allows you to save energy.
Example
Setup
Example
EZ Setup
Power Control
CH Setup
[Disable]
[Disable]
No Signal Off
Antenna Setup-DIGITAL
Input Skip
No Operation Off
Parental CTRL
Position
[English]
Language
Reset
Press MENU to display the MENU screen, and then
1
2
3
4
press
Press
/
to select "Power Control".
c d
/
to select a "No Signal Off" or "No
a b
Operation Off", and then press ENTER.
Press
/
to select "Enable", and then press
c d
ENTER.
Press MENU to exit.
No Signal Off
When set to"Enable", the power will automatically shut
down if there is no signal for 15 minutes.
Press MENU to display the MENU screen, and then
1
2
press
Press
/
to select "Setup".
c d
• Five minutes before the power shuts down, the remaining
time displays every minute.
• "Disable" is the factory preset value.
/
to select a specific adjustment item,
a b
and then press ENTER.
• When you select "EZ Setup", "CH Setup", "Parental
CTRL" or "Reset", you can enter the 4-digit secret
number here. See page 23 for setting a secret number.
• When a TV program finishes, this function may not operate.
No Operation Off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
Press
/
(or
/
) to select the desired setting,
a b
c d
3
4
and then press ENTER.
Press MENU to exit.
EZ Setup
• Five minutes before the power shuts down, the remaining
time displays every minute.
• "Disable" is the factory preset value.
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Select "Home" or "Store" for the location
where you plan to install the TV.
• If you select "Home", AV MODE is set to "STANDARD".
• If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".
In case no remote control signal is received within 30
minutes, AV MODE will change to "DYNAMIC (Fixed)"
automatically.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
• See "Initial Setup" on page 12 for setting each item.
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
CH Setup
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Input Signal
(for Analog PC Input Mode Only)
Some input signals may have to be registered manually
to display properly. The pair of input signals (resolutions)
in the list below is not distinguishable when received.
In such a case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
CH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
1024 x 768
1360 x 768
On: Skips channels. (Channel selection disabled using CH
/
.)
r s
Off: Does not skip channels. (Channel selection enabled using
CH .)
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
/
r s
Auto Sync.
(for Analog PC Input Mode Only)
• See "Initial Setup" on page 12 for setting each item.
• If no channel is found, confirm the type of connection made
with your TV and try channel search again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
For automatically adjusting the PC image.
Yes: Auto Sync. starts and "Now adjusting the image."
displays.
No: This function does not work.
Antenna Setup-DIGITAL
• When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if "Completed" displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup-
DIGITAL" screen. If necessary, adjust the direction of
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
• Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
Fine Sync.
Channel Strength: Input the 2-digit channel number
to check the signal strength of the selected channel.
Make sure the signal is strong enough for each
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
channel.
• This function is available for DIGITAL (Air) only.
H-Pos.: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
Clock: Adjust when the image flickers with vertical
stripes.
Input Skip
This setting allows you to skip the HDMI or PC-IN Input
("Input 4 (HDMI)", "Input 5 (HDMI)" and "Input 6 (RGB)")
on the Input Selection operation.
Phase: Adjust when characters have low contrast or
when the image flickers.
Yes: Skips the input.
No: Does not skip input.
Input Label
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press
• For resetting all Fine Sync. adjustment items to the factory
preset values, press
ENTER.
/
to select "Reset", and then press
a b
• It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
• The default cursor position may not be in the center,
because the screen position variable ranges may be
asymmetrical.
/
/
/
to select the new name for the input
a b c d
mode.
• You cannot change labels if the INPUT SOURCE is TV.
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Position
New Secret No.
■
You can set and change the secret number by using
0-9.
For adjusting a picture's horizontal and vertical
position.
Input Secret No.: When you change the secret number,
enter the old 4-digit secret number here. The cursor
moves to "New Secret No.".
H-Pos.: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
New Secret No.: When you set the new secret number,
enter the new 4-digit secret number here. The cursor
moves to "Reconfirm".
Reconfirm: Enter the same 4-digit number you set in
"New Secret No.".
• For resetting adjustments to the factory preset values,
press
/
to select "Reset", and then press ENTER.
a b
• When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.
Secret No. Clear
■
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
• Adjustments are stored separately according to input
source.
You can clear your secret number.
Yes: Your secret number is cleared.
No: Your secret number is not cleared.
Language
• As a precautionary measure, make a note of your secret
number and keep it in a familiar place.
• If the secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not be
selectable from the menu.
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Reset
Status
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Used to enable or disable the parental control function.
This function will not be selectable from the menu if
you do not first configure your secret number.
On: Enables Parental CTRL.
"Return to the factory preset values" displays on the
screen.
1
Off: Disables Parental CTRL.
• If you have already set the Secret No., input the 4-digit
secret number here.
V-Chip
Select "Yes".
2
3
V-CHIP is an electronic filtering device built into your
TV. This tool gives parents a great degree of control
over broadcasts accessed by their children. It allows
parents to select programs judged suitable for child
viewing while blocking ones judged not suitable. It
does so automatically once you activate the V-CHIP
feature in your TV. "V-Chip" and "Status" will not be
selectable from the menu if you do not first configure
your secret number.
• "Now, TV will restart automatically. OK?" displays on the
screen.
Select "Yes".
• "Now initializing..." displays on the screen and blinks.
After the reset has been completed, the power shuts off
and then comes back on. The screen will have returned
to its original settings.
• The U.S. has two rating systems for viewing content: TV
Parental Guidelines and movie ratings.
• The TV Parental Guidelines work in conjunction with the
V-CHIP to help parents screen out inappropriate television
shows from their children.
• Movie ratings are used for original movies rated by the
Motion Picture Association of America (MPAA) as watched
on cable TV and not edited for television. The V-CHIP can
also be set to block MPAA-rated movies.
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
• The TV Location settings will not be changed.
Parental CTRL
(Parental Control Setting)
Secret No.
Allows you to use a secret number to protect certain
settings from being accidentally changed.
• The setting automatically enters "Block" for any ratings
below your selection.
• If Status is not set to "On", the configuration settings will
not work.
IMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 23 to 25):
1. Secret No. is registered.
2. V-Chip/V-Chip (DTV Only) settings have been made.
• The “V-Chip (DTV Only)” will only be selectable when
a new rating system can be downloaded via digital
broadcasting in the U.S.
3.
"
Status
"
is set to "On".
23
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
G: General audiences. All ages admitted.
PG: Parental guidance suggested. Some material may not be
suitable for children.
MPAA (Voluntary movie rating system)
Example
■
MPAA
PG-13: Parents strongly cautioned. Some material may be
inappropriate for children under 13.
R: Restricted. Under 17 requires accompanying parent or
adult guardian (age varies in some jurisdictions).
NC-17: No one 17 and under admitted.
TV Guidelines
G
Can. English Ratings
Can. French Ratings
PG
PG-13
R
NC-17
X
X: X is an older rating that is unified with NC-17 but may be
encoded in the data of older movies.
NONE
Press
/
to adjust the item to your desired position.
a b
" " indicates the item is blocked. Press MENU to exit.
• Voluntary movie rating system only uses an age-based
rating.
TV Parental Guidelines
Example
■
MPAA
Press
/
to adjust the item to your desired position.
a b
TV Guidelines
" " indicates the item is blocked. Press MENU to exit.
TV-Y
Can. English Ratings
Can. French Ratings
TV-Y7
TV-G
D
L
TV-PG
TV-14
TV-MA
NONE
S
V
FV
Example
When setting an individual content-based rating
item:
MPAA
TV Guidelines
TV-Y
Can. English Ratings
Can. French Ratings
TV-Y7
TV-G
D
L
Press
or ENTER to access blocked content
d
1
2
3
items from the currently selected age-based rating
item.
TV-PG
TV-14
TV-MA
NONE
S
V
Press to select an individual item, and then
/
a b
FV
press ENTER to unblock it (" " is removed). Repeat
the same steps for the other items.
Press
or RETURN to register after all individual
c
content rating items are set.
Content
FV
V
S
L
D
Rating
(Fantasy (Violence)
violence)
(Sexual
(Adult
(Sexually
situation) language) suggestive
dialog)
TV-Y (All children)
TV-Y7 (Directed to older children)
TV-G (General audience)
Suggested
age
TV-PG (Parental Guidance suggested)
TV-14 (Parents strongly cautioned)
TV-MA (Mature audience only)
: The content rating can be set, but this rating is not normally broadcast by TV stations.
: Content rating can be set.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Canadian Rating Systems (Canadian English ratings and Canadian French ratings)
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC)
policy on violence in television programming.
• While violence is the most important content element to be rated, the structure developed takes into consideration other
program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian French
ratings.
E: Exempt: Includes news, sports, documentaries and other information
programming; talk shows, music videos, and variety programming.
C: Children: Intended for younger children under the age of 8 years.
Pays careful attention to themes that could threaten their sense of
security and well-being.
C8+: Children over 8 years old: Contains no portrayal of violence as the
preferred, acceptable, or only way to resolve conflict; nor encourage
children to imitate dangerous acts which they may see on the screen.
G: General: Considered acceptable for all age groups. Appropriate
viewing for the entire family, contains very little violence, physical,
verbal or emotional.
Canadian English Ratings
Example
■
MPAA
E
TV Guidelines
C
Can. English Ratings
Can. French Ratings
C8+
G
PG
14+
18+
NONE
PG: Parental Guidance: Intended for a general audience, but may not
be suitable for younger children (under the age of 8) because it could
contain controversial themes or issues.
14+: Over 14 years: Could contain themes where violence is one of
the dominant elements of the storyline, but it must be integral to the
development of plot or character. Language usage could be profane
and nudity present within the context of the theme.
Press
/
to adjust the item to your desired
a b
position. " " indicates the item is blocked.
Press MENU to exit.
18+: Adults: Intended for viewers 18 years and older and might contain
depictions of violence, which while related to the development of plot,
character or themes, are intended for adult viewing. Could contain
graphic language and portrayals of sex and nudity.
E: Exempt programming.
Canadian French Ratings
Example
■
G: General: All ages and children, contains minimal direct violence, but
may be integrated into the plot in a humorous or unrealistic manner.
8ans+: General but inadvisable for young children: May be viewed
by a wide public audience, but could contain scenes disturbing to
children under 8 who cannot distinguish between imaginary and real
situations.
MPAA
TV Guidelines
E
Can. English Ratings
Can. French Ratings
G
8ans+
13ans+
16ans+
18ans+
NONE
Recommended for viewing with parent.
13ans+: Over 13 years: Could contain scenes of frequent violent scenes
and therefore recommended for viewing with parent.
16ans+: Over 16 years: Could contain frequent violent scenes and
intense violence.
18ans+: Over 18 years: Only for adult viewing. Could contain frequent
violent scenes and extreme violence.
Press
/
to adjust the item to your desired
a b
position. " " indicates the item is blocked.
Press MENU to exit.
How to temporarily release the V-CHIP BLOCK
■
When the V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.
Press ENTER while the V-CHIP is working, and then the secret number setting menu displays.
Input the 4-digit secret number by using 0-9. At this time V-CHIP BLOCK temporarily releases.
1
2
Reactivating the temporarily released V-CHIP BLOCK
■
You can reactivate the temporarily released V-CHIP BLOCK as shown below.
• Select "Status" setting from the Parental CTRL menu to reactivate BLOCK. (See page 23.)
• Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can. English Ratings" or "Can. French Ratings") from the Parental CTRL to
reactivate BLOCK. (See pages 24 and 25.)
• Switch off the TV power.
• Performing any of the three above will activate the V-CHIP BLOCK.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Input Select
Option Menu
Example
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 3, you may need
to change the input signal type setting from the list
below:
Option
AQUOS LINK Setup
Audio Only
Auto/COMPONENT/VIDEO
• If the selected signal type is incorrect, images are not
displayed at all or are displayed without any color.
• Refer to your external equipment operation manual for the
signal type.
[Low]
Digital Noise Reduction
Output Select
[Fixed]
Caption Setup
• If you set INPUT 1 or 3 to Auto, the TV will automatically
select the input signal.
• Setting INPUT 1 or 3 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority.
Digital Caption Info.
Program Title Display
Favorite CH
[No]
[Off]
[Off]
Game Play Time
Operation Lock Out
INPUT 1 or 3:
COMPONENT VIDEO
VIDEO
1
2
HDMI Setup
To watch an HDMI or PC-IN equipment image, select
"INPUT4" or "INPUT5" from "INPUT SOURCE" menu
using INPUT on the remote control unit or on the TV.
Auto View:
Enable: To use View Mode based on signal
recognition, including an HDMI signal.
Disable: No function.
Press MENU to display the MENU screen, and then
1
2
3
4
press
Press
/
to select "Option".
c d
Audio Select:
/
to select a specific adjustment item and
a b
Digital: For an audio signal via the HDMI terminal.
Analog: For an audio signal via the R-AUDIO -L
terminal.
then press ENTER.
Press
/
(or
/
) to select the desired setting,
a b
c d
and then press ENTER.
Press MENU to exit.
Skip this step for "Audio Only".
• Refer to your external equipment operation manual for the
signal type.
• "Audio Select" is only available for INPUT 5.
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
Audio Only
When listening to music from a music program, you
can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Output Select
Off: Both screen images and audio are output.
Allows you to select what controls the audio output.
Fixed: Sound via speaker is adjusted with VOL
/
on
k l
on the TV.
the remote control unit or VOL
/
l k
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed.
Sound via the AUDIO OUTPUT terminal is not
adjustable and outputs at a consistent level.
Variable: Sound via the AUDIO OUTPUT terminal is
Digital Noise Reduction
adjusted with VOL
/
on the remote control unit or
k l
on the TV.
Produces a clearer video image.
VOL
/
l k
Sound via speaker is muted.
Off: No adjustment
High: For enhanced Digital Noise Reduction
Low: For moderate Digital Noise Reduction
Color System
Select the video signal system compatible with your
equipment from the list below:
Auto/NTSC/PAL-M/PAL-N
• "Color System" can only be set for the INPUT 1 VIDEO,
INPUT 2 and INPUT 3 VIDEO.
• If you have already set the Secret No., input the 4-digit
secret number here. See page 23 for setting a secret
number.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Caption Setup
Game Play Time
This function allows you to adjust the closed
caption screen appearance to suit your preference.
You can adjust 7 items: "Caption Size", "Font
Style", "Foreground Color", "Foreground Opacity",
"Background Color", "Background Opacity" and
"Character Edge".
This function displays the elapsed game time so you
do not lose track of the time. To display the elapsed
time, select "GAME" for the AV MODE before starting
the game.
On: The elapsed time is displayed every 30 minutes when
you switch to GAME mode in external input mode.
Off: No adjustment.
Example:
Selectable items available for "Font Style".
Default: The font specified by broadcasting station or
default font.
Type 0: Proportional font used in the MENU screen.
Type 1: Monospaced with serifs.
Operation Lock Out
This function locks the operation buttons on the TV
and the remote control.
Off: No adjustment.
RC Control Lock: All buttons on the remote control are
locked.
Button Control Lock: All buttons on the TV, except
Type 2: Proportionally spaced with serifs.
Type 3: Monospaced without serifs.
Type 4: Proportionally spaced without serifs.
Type 5: Casual font type.
POWER, are locked.
Type 6: Cursive font type.
Type 7: Small capitals.
• To unlock the buttons on the remote control, press MENU
on the TV, and then select "Off" on the MENU screen.
• To unlock the buttons on the TV, press MENU on the
remote control, and then select "Off" on the MENU screen.
• For resetting adjustments to the factory preset values,
press
/
to select "Reset", and then press ENTER.
a b
• The default value depends on the broadcasting station.
Digital Caption Info.
(Digital Caption Information)
This function allows viewing of digital closed caption
information for the digital broadcast program being
viewed.
• This list is not displayed for analog broadcasts or external
input audio/video.
• This information is not included in CC1, CC2, Text1, or
Text2, and is not displayed in a list.
Program Title Display
Select the CH display when changing channels for
digital broadcasting.
Yes: "Program Info." displays.
No: "Program Info." does not display.
Favorite CH
(Favorite Channel Setting)
This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.
To register your favorite channel:
Select "Register" and then press ENTER. Press
d
/
/
/
a b c
to select the position in the category, and then press
ENTER to register.
To delete your favorite channel:
Select "1 Data Clear" and then press ENTER. Press
/
/
/
to select the channel you want to delete, and
a b c d
then press ENTER. Select "Yes" and then press ENTER.
To delete all the favorite channels, select "All Data Clear".
• Before setting the channel, select the channel you want to
register as a favorite channel.
• You can display the Favorite CH screen by pressing
"
"
FAVORITE on the remote control.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Software Update
Digital Setup Menu
This function allows software updates by inserting
a USB memory device with the update file into the
SERVICE terminal on the TV.
This setting allows you to optimize the settings of
Digital broadcasting.
To check for the availability of a software update, visit
call 1-800-BE-SHARP (800-237-4277).
Example
Digital Setup
Audio Setup
[PCM]
Identification
Software Update
CAUTION
• Do not remove the USB memory device or unplug the
AC cord while the software is being updated.
• Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the TV cannot read the data in the USB
memory device and software updating will fail.
Press MENU to display the MENU screen, and then
1
2
3
4
press
Press
/
to select "Digital Setup".
c d
/
to select a specific adjustment item,
a b
and then press ENTER.
Insert the USB memory device with the update file
1
Press
/
(or
/
) to select the desired setting,
a b
c d
into the SERVICE terminal on the TV.
and then press ENTER.
Press MENU to exit.
Audio Setup
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".
Press MENU to display the MENU screen, and
2
then press
/
to select “Digital Setup”.
c d
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital.
Press
/
to select “Software Update”, and then
a b
3
press ENTER.
• If you have already set the Secret No., go to step 4.
Identification
The current version of the TV software is displayed.
Digital Setup
Audio Setup
[PCM]
Identification
Software Update
Input the 4-digit secret number by using 0–9.
4
Digital Setup
Secret No.
a a a a
28
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Press ENTER to start checking the data in the
5
Press ENTER to start updating.
7
USB memory device.
• The screen becomes dark for a while until the update
screen can be displayed. Please wait for the update
screen to appear. Do not unplug the AC cord.
Insert the USB memory device containing
the software update file.
The picture will temporarily go dark until
the Software Update display appears.
Wait several minutes and do not unplug the AC cord.
OK
OK
“
”
During the data checking, Checking blinks.
6
Now checking the data in the USB memory device.
Example
Now updating
Do not unplug AC cord.
Checking
Update Version
UXXXXXX2
30%
• The current version of the TV software and the version
of the update file on the USB memory device are
displayed. To update the TV software with the update
file, select “Yes”, and then press ENTER.
CAUTION
• Do not remove the USB memory device or unplug the
AC cord while the software is being updated.
Example
Software update file is detected
in the USB memory device.
Start update?
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
8
Current Version:
Update Version:
UXXXXXX1
UXXXXXX2
After this screen is displayed, the TV automatically
turns off and then turns on again.
Yes
No
Example
• If the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
Software update is complete.
Update Version
UXXXXXX2
Software update file is not detected
in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
• If the update has failed, check the file in the USB
memory device and try Software Update again.
OK
Failed to complete update.
Retry Software Update.
If system Update fails again,
contact the customer service center.
There is more than one software file
in the USB memory device.
Confirm that only the software update file is
in the USB memory device.
After the screen shown below is displayed, press
ENTER.
9
OK
System software was
successfully updated.
Remove the USB memory device.
OK
Remove the USB memory device.
10
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Viewing Options
Operating the Connected Equipment
Presetting Remote Control Function
You can operate the connected AV products (AV
receiver, cable box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function of your
remote control unit.
To operate the connected equipment, press
FUNCTION to select the LED for your device. (VCR,
AUDIO, CBL/SAT (cable converter) or DVD.) The
LED lights up, and the remote control unit button will
function as follows.
• When you operate VCR or DVD, press INPUT to select the
terminal connected to your device.
• CABLE and SAT cannot be selected at the same time.
1
1 SOURCE POWER
6
• Turns the connected equipment power on and off.
2
3
4
7
8
2 G
9
10
• Rewinds the tape and allows picture search. (VCR)
• Hold down to go in reverse. (DVD)
3 REC
• Starts recording. (VCR)
5
4 K
• Pressing quickly once takes you to the start of the chapter
currently playing. Each time you press it, you move back
to the start of the previous chapter. (DVD)
11
12
5 0–9 (CBL/SAT), • (DOT) (SAT)
• Press a button (or buttons) that corresponds to the
channel that you wish to watch.
6 I
• Starts playback. (VCR, DVD)
13
14
7 J
• Rapidly advances the tape and allows picture search.
(VCR)
• Hold down to fast forward. (DVD)
8 F
• Sets pauses and still pictures. (VCR, DVD)
9 H
• Stops the tape transport. (VCR)
• Playback stops when pressed. With some DVD players,
pressing the button twice may open the disc tray. (DVD)
Presetting manufacturer codes
10 L
Press FUNCTION until the LED for your device
lights up.
1
• Pressing quickly once takes you to the start of the next
chapter. Each time you press it, you move ahead to the
start of the next chapter. (DVD)
After the LED for your device lights up, press
FUNCTION and DISPLAY at the same time to
enter the code registration mode. The LED will
blink.
2
11 FLASHBACK
• Press to switch between the current channel and the
channel you were watching immediately before. Some
manufacturers do not preset FLASHBACK. (CBL)
CH
/
12
r s
Press 0–9 to enter the manufacturer code. (See
3
4
r
s
• Press CH or CH
to tune in to a higher or lower
page 31.)
channel. (CBL)
• Press to select the channel of the TV tuner on the VCR.
(VCR)
• Preset mode is finished once the LED no longer lights
up.
13 MENU
After registering the code, the LED will stop blinking
then turn off after one second. (If you perform an
incorrect operation, the LED will blink quickly then
turn off.)
• When this button is pressed, the DVD menu will display.
/
/
/
/
/
, ENTER
14 a b c d
•
/
: Press the button to select items on the SAT
a b c d
GUIDE screen or SAT MENU screen. (SAT). Press the
button to select items on the DVD MENU screen. (DVD)
• ENTER: Press to activate the selected function. (SAT,
DVD)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Viewing Options
Manufacturer codes
VCR BRAND
REMOTE CONTROL CODE
NUMBER
REMOTE CONTROL CODE
NUMBER
DVD/BD/LD BRAND
REMOTE CONTROL CODE
NUMBER
CATV/SAT BRAND
• Numbers marked with * are SAT codes, all others are
CATV codes.
REMOTE CONTROL CODE
AUDIO BRAND
NUMBER
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AQUOS LINK
Controlling HDMI Equipment Using AQUOS LINK
What’s AQUOS LINK?
• Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate
compatible system equipment (Blue-ray Disc equipment, AV amplifier, DVD).
• By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a
recorder or AV amplifier using the remote control of the TV.
• AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Optical fiber cable
(commercially available)
AQUOS LINK-compatible
Audio system
HDMI-certified cable
(commercially available)
HDMI-certified cable
(commercially available)
Connecting AQUOS
BD Player via AQUOS
LINK-compatible
Audio system
AQUOS BD Player
TV
• Point the remote control toward the TV, not to connected HDMI equipment.
• Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certified cable.
• Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this system.
• These operations affect the HDMI equipment selected as the current input source. If the equipment does not operate, turn on
the equipment and select the appropriate input source using INPUT.
You can operate AQUOS LINK-compatible devices with the remote control
unit when the FUNCTION of the remote control unit is set to TV.
REC STOP and OPTION buttons will function only when AQUOS LINK is
used.
One Touch Play
■
While the TV is in standby mode, it automatically turns on and plays back the
image from the HDMI source.
One Touch Recording
■
Press REC while you are viewing a broadcast received with the AQUOS
LINK-compatible recorder. The AQUOS LINK automatically recognizes the
connected HDMI device and starts recording.
Single remote control
■
The AQUOS LINK automatically recognizes the connected HDMI device and
you can control the TV and the devices as if using a universal remote control.
Control the AQUOS LINK-compatible audio system
■
Set the volume of AQUOS LINK-compatible audio system.
• The above description is an example of the AQUOS LINK function.
• The steps in “AQUOS LINK Setup” on page 33 need to be completed beforehand.
• Refer to this operation manual and the operation manual of the AQUOS LINK device to be used with this TV.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AQUOS LINK
AQUOS LINK Setup
One Touch Recording
This function allows easy one-touch recording of the
program being viewed on the TV to AQUOS LINK-
compatible equipment with a recording function by
simply pressing REC on the remote control.
Press MENU to display the MENU screen, and then
1
2
3
4
5
press
Press
/
to select "Option".
c d
/
to select “AQUOS LINK Setup”, and
a b
then Press ENTER.
Prepare the connected AQUOS LINK-compatible
recorder for recording. Check the following items.
• Make sure that the antenna cable is connected.
• Check that there is sufficient available space on the
recording media (HDD, DVD, etc.).
• On the TV, use “AQUOS LINK Setup” and “Model select” to
select the equipment for recording.
Press
/
to select a specific item, and then press
a b
ENTER.
Press
/
(or
/
) to select the desired setting,
a b
c d
and then press ENTER.
Press MENU to exit.
• By default, the recorder connected to INPUT 5 is selected
for recording.
Auto Power On
If this is activated, the One Touch Play function is
enabled.
Press REC to start recording.
1
• When you are viewing a broadcast received with the
AQUOS LINK-compatible recorder selected in "Model
select", recording to the AQUOS recorder of the
broadcast being viewed starts.
Yes: While the TV is in standby mode, it automatically
turns on and plays back the image from the HDMI
source.
No: This function does not work.
• When you are viewing a broadcast received with
equipment other than the AQUOS LINK-compatible
recorder selected in "Model select" or other external
input equipment, pressing REC on the remote control
does not start recording.
Auto Power On
Selecting Recorder
Yes
No
Press REC STOP to stop recording.
2
One Touch Playback
AQUOS LINK allows you to operate the HDMI-
connected equipment with one remote control.
Selecting Recorder
When multiple AQUOS LINK-compatible devices are
connected, this function allows you to set the recorder
for recording when you press REC on the TV’s remote
control unit.
Press
/
to select the recorder for recording.
a b
Example
Auto Power On
Press
to start playing back a title.
d
Selecting Recorder
• The last played program is played back. You can use the
following buttons during broadcast viewing.
Input
Location
[1.0.0.0]
ꢀꢀINPUT4
Buttons
Description
ꢀꢀINPUT5
[2.0.0.0]
SOURCE Turns the power of the HDMI connected
POWER devices on and off.
Hold down to go in reverse.
Starts playback.
G
I
Example : when connecting AQUOS LINK-compatible
recorder via AQUOS LINK-compatible Audio
system
Hold down to fast forward.
Playback stops.
J
H
Auto Power On
Selecting Recorder
Sets pauses and still pictures.
F
Input
Location
[1.0.0.0]
Pressing quickly once takes you to the start
of the chapter currently playing. Each time
you press it, you move back to the start of
the previous chapter.
ꢀꢀINPUT4
ꢀꢀINPUT4ꢀꢁ5WDꢂ
[1.1.0.0]
[2.0.0.0]
T
U
ꢀꢀINPUT5
Pressing quickly once takes you to the start
of the next chapter. Each time you press
it, you move ahead to the start of the next
chapter.
When an AQUOS
or other equipment is connected between the TV
and recorder, “Sub” is displayed.
LINK-compatible audio system
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AQUOS LINK
Selecting Media Type for CEC-Compatible
Recorder
AQUOS LINK Menu
AQUOS LINK
You can switch the media (HDD or DVD) for playback
or recording on the AQUOS LINK-compatible recorder.
Recorder EPG
Top menu/title list
Media change
Press OPTION to display the AQUOS LINK MENU
1
2
3
screen.
Press
/
to select “Media change”, and then
a b
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Model select
press ENTER.
Select the desired media such as DVD or HDD.
• The Media type toggles each time you press ENTER in
“Media change”.
• Select the media to be operated by the player.
Listening with the AQUOS AUDIO Speaker System
You can select to listen to the TV sound only from the
AQUOS LINK-compatible audio system and manually
change its sound mode.
Press OPTION to display the AQUOS LINK MENU
screen.
1
Press
/
to select “By AQUOS AUDIO SP”, and
a b
2
then press ENTER.
• The sound from the TV speaker is muted and only the
sound from the AQUOS LINK-compatible audio system
is audible.
• You can use VOL
/
and MUTE.
k l
Select “By AQUOS SP”, and then press ENTER to
Timer Recording
listen to the TV sound.
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control.
Manually Changing AQUOS AUDIO Speaker
System’s Sound Mode
Press OPTION to display the AQUOS LINK MENU
screen.
1
Press OPTION to display the AQUOS LINK MENU
screen.
1
2
Press
press ENTER.
/
to select “Recorder EPG”, and then
a b
2
Press
/
to select “Sound mode change”, and
a b
then press ENTER.
• The recorder’s EPG is displayed.
• The sound mode changes each time you press ENTER.
• Refer to the operation manual of the AQUOS LINK-
compatible audio system for details.
Select the program to record.
3
• You can use
/
/
/
, ENTER, RETURN, EXIT and
a b c d
the coloured buttons.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
• Refer to the operation manual of the recorder for details.
Playback of Titles Using AQUOS LINK
This section explains how to play back a title in the
AQUOS BD player.
Press OPTION to display the AQUOS LINK MENU
1
screen.
Press
/
to select “Model select”, and then
a b
2
press ENTER. The HDMI device toggles each time
Power on the AQUOS BD player, and select
appropriate external input.
1
2
3
you press ENTER.
Press OPTION to display the AQUOS LINK MENU
screen.
Press
/
to select “Top menu/title list”, and then
a b
press ENTER.
• The title list data from the connected AQUOS BD player
displays.
Select the title with
to start playback.
/
/
/
, and then press
a b c d
d
4
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Possible Solution
• No power
• Check if you pressed TV POWER on the remote control unit. (See page 12.) If the
indicator on the TV does not light up, press POWER on the TV.
• Is the AC cord disconnected? (See page 6.)
• Has the power been turned on? (See page 12.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, may cause improper operation.
In this case, operate the unit after first turning off the power of the TV or unplugging
the AC cord and replugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Is the FUNCTION set correctly? Set it to the TV setting position.
• Are batteries inserted with polarity ( ) aligned? (See page 7.)
,
e f
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control sensor?
• Picture is cut off/with sidebar
screen.
• Is the image position correct? (See page 23.)
• Are screen mode adjustments such as picture size made correctly? (See page 16.)
• Strange color, light color, or color • Adjust the picture tone. (See pages 19 and 20.)
misalignment
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting. (See page 22.)
• Power is suddenly turned off.
• Is the sleep timer set? (See page 13.)
• Check the power control settings. (See page 21.)
• The unit's internal temperature has increased. Remove any objects blocking vent or
clean.
• No picture
• No sound
• Is connection to other components correct? (See page 11.)
• Is correct input signal source selected after connection? (See page 26.)
• Is the correct input selected? (See page 26.)
• Is picture adjustment correct? (See pages 19 and 20.)
• Is “On” selected in “Audio Only”? (See page 26.)
• Is a non-compatible signal being input? (See page 38.)
• Is the volume too low? (See page 13.)
• Is “Variable” selected in “Output Select”? (See page 26.)
• Have you pressed MUTE on the remote control unit? (See page 13.)
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.
Troubleshooting-Digital Broadcasting
The error message about reception of broadcast
The example of an error message
Error code
Possible Solution
displayed on a screen
• Check the antenna cable. Check that the antenna is correctly
setup.
• Failed to receive broadcast.
• No broadcast now.
E202
E203
• Check the broadcast time in the program guide.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: 4°F to 140°F ( 20°C to 60°C)
f
e
f
e
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
RS-232C Port Specifications
PC control of the TV
■
Command format
■
■
Eight ASCII codes
CR
e
• Attach an RS-232C cable cross-type (commercially
available) to the supplied Din/D-Sub RS-232C for the
connections.
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits
Return code
Parameter 4-digits
• This operation system should be used by a person who is
accustomed to using computers.
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0–9, x, blank, ?
Communication conditions
■
Parameter
Set the RS-232C communication settings on the PC to
Input the parameter values, aligning left, and fill with
blank(s) for the remainder. (Be sure that 4 values are
input for the parameter.)
When the input parameter is not within an adjustable
range, “ERR” returns. (Refer to “Response code format”.)
Any numerical value can replace the “x” on the table.
match the TV's communication conditions.
The TV's communication settings are as follows:
Baud rate:
Data length:
Parity bit:
9,600 bps
8 bits
None
Stop bit:
Flow control:
1 bit
None
When “?” is input for some
commands, the
0
0
a
?
0
3
0
0
9
present setting
value responds.
Communication procedure
■
?
?
?
?
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
Response code format
■
Normal response
Problem response (communication
error or incorrect command)
O
K
E
R
R
Return code (0DH)
Return code (0DH)
Command table
■
• Commands not indicated here are not guaranteed to operate.
CONTROL CONTENTS
The Power On command rejected.
The Power On command accepted.
It shifts to standby.
CONTROL ITEM
COMMAND PARAMETER
POWER ON COMMAND SETTING
R
S
P
W
0
1
0
1
x
0
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
OFF
ON
Power Off
Power On
(Toggle)
P
O
W
R
POWER SETTING
Power On
INPUT SELECTION A TOGGLE
TV
INPUT1-6
INPUT SELECTION B INPUT 1
INPUT 3
I
I
I
I
I
T
T
A
N
N
V
G
V
V
P
P
M
D
D
D
1
It input-switches by the toggle. (It is the same as an input change key)
It input-switches to TV. (A channel remains as it is. (Last memory))
It input-switches to INPUT1~INPUT6.
Input terminal number (1–6)
0: AUTO, 1: VIDEO, 2: COMPONENT
0: AUTO, 1: VIDEO, 2: COMPONENT
*
*
An input change is also included.
3
AV MODE SELECTION
A
D
*
0: (Toggle), 1: STANDARD, 2: MOVIE, 3: GAME, 4: USER,
5: DYNAMIC(Fixed), 6: DYNAMIC, 7: PC, 8: xvYCC
Although it can choose now, it is toggle operation in inside.
VOLUME
V
H
V
C
P
O
P
P
L
H
I
L
O
O
C
S
D
M
S
S
K
E
*
*
*
*
*
*
*
*
_
*
_
_
_
_
_
_
Volume (0–60)
H-POSITION
V-POSITION
CLOCK
The screen position variable ranges depend on the View Mode or the
signal type. The ranges can be seen on the position-setting screen.
POSITION
*
*
*
_
*
*
*
_
Only PC mode. (0–180)
Only PC mode. (0–40)
0: (Toggle) [AV], 1: Side Bar [AV], 2: S.Stretch [AV]
3: Zoom [AV], 4: Stretch [AV], 5: Normal [PC]
6: Zoom [PC], 7: Stretch [PC],
PHASE
VIEWMODE
W
E
0: Although it can choose now, it is toggle operation in inside.
1: Only available when 4:3 signal is being input.
5, 6: Only available when 4:3 signal is being input.
8: [PC] Available except when UXGA is being input.
[AV] Only available when 1080i/p is being input.
9: Only available when 720p is being input.
8: Dot by Dot [PC] [AV], 9: Full Screen [AV]
MUTE
M
A
U
C
C
F
T
S
H
T
E
U
A
*
*
_
_
_
_
_
_
_
_
_
_
_
_
0: (Toggle), 1: On, 2: Off
0: (Toggle), 1: On, 3: Off
(Toggle)
0: OFF, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN.,
3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.
SURROUND
AUDIO SELECTION
SLEEP TIMER
A
x
*
O
M
CHANNEL
DIRECT
CHANNEL
(ANALOG)
D
C
C
H
*
*
*
_
The channel number of TV
(1–135)
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
In Cable, 1–135ch is effective.
DIRECT
CHANNEL
(DIGITAL)
D
D
A
C
2
2
P
U
*
*
*
*
*
*
*
_
(0100-9999)
(1-999)
DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
D
C
2
L
*
*
*
_
(0-999)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
D
D
C
C
C
C
C
H
H
L
1
1
U
D
C
0
1
P
W
P
*
*
x
x
x
*
*
_
_
_
*
*
_
_
_
*
*
_
_
_
(0-9999)
(0-6383)
The channel number of TV b1
The channel number of TV a1
(Toggle)
DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000)
DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000)
If it is not TV display, it will input-switch to TV. (same function as CHU)
If it is not TV display, it will input-switch to TV. (same function as CHV)
Toggle operation of a closed caption.
CH UP
CH DOWN
CC
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
• Any numerical value can replace the “x” on the table.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Item
Model: LC-32D64U
Model: LC-37D64U
32 screen size class Advanced Super
37 screen size class Advanced Super
o
o
LCD panel
View & BLACK TFT LCD
View & BLACK TFT LCD
(Diagonal Measurement : 31 35
/
64o
)
(Diagonal Measurement : 37 )
o
Resolution
2,073,600 pixels (1,920
1,080)
g
TV-standard (CCIR)
VHF/UHF
American TV Standard ATSC/NTSC System
VHF 2-13ch, UHF 14-69ch
CATV
1-135ch (non-scrambled channel only)
TV
Function
Receiving
Channel
Digital Terrestrial
Broadcast (8VSB)
2-69ch
Digital cable*1
(64/256 QAM)
1-135ch (non-scrambled channel only)
Audio multiplex
BTSC System
Backlight
Audio out
60,000 hours (at Backlight Standard position)
10W
2
g
INPUT 1
INPUT 2
INPUT 4
INPUT 5
AV in, COMPONENT in
AV in, S-VIDEO in
HDMI in with HDCP
Audio in, HDMI in with HDCP
INPUT 6
15-pin mini D-sub female connector, Audio in (Ø 3.5 mm jack)
75 Unbalance, F Type 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
Rear
ANT/CABLE
Terminals
q
g
DIGITAL AUDIO OUTPUT Optical Digital audio output
1 (PCM/Dolby Digital)
g
OUTPUT
RS-232C
INPUT 3
SERVICE
Audio out
9-pin D-sub male connector
AV in, COMPONENT in
Software update
Side
OSD language
English/French/Spanish
AC 120 V, 60 Hz
Power Requirement
Power Consumption
145 W (0.7 W Standby with AC 120 V)
39.7 lbs./18.0 kg
180 W (0.7 W Standby with AC 120 V)
45.2 lbs./20.5 kg
TV + stand
TV only
Weight
33.0 lbs./15.0 kg
38.6 lbs./17.5 kg
TV + stand
TV only
30 9
30 9
/
/
22 39
20 23
/
/
10 3
/
4 inch
35 23
35 23
/
/
25 1
22 7
/
/
10 3
/
4 inch
Dimension*2
16 g
16 g
64 g
64 g
64 g
64 g
8 g
8 g
3 3
/
4 inch
3 3
/4 inch
(W
H
D)
g
g
Operating temperature
32°F to 104°F (0°C to 40°C)
e
e
e
*1
*2
Emergency alert messages via Cable are unreceivable.
The dimensional drawings are shown on the inside back cover.
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
Part name
Wall mount bracket
Attachment
Model number
AN-37AG2
Optional Accessory
The listed optional accessory is available for the Liquid
Crystal Television. Please purchase it at your nearest shop.
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
AN-37P30
37
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Compatibility Chart
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 22 to set PC input signals.
PC
Resolution
720 x 400
Horizontal Frequency
Vertical Frequency
VESA Standard
31.5 kHz
70 Hz
*
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz
64.0 kHz
64.0 kHz
75.0 kHz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
O
O
O
O
O
O
O
O
O
O
O
O
O
O
VGA
640 x 480
800 x 600
1024 x 768
*
*
SVGA
XGA
PC
WXGA
SXGA
SXGA+
1360 x 768
1280 x 1024
1400 x 1050
1600 x 1200
*
UXGA
*These 4 formats are not supported by the analog RGB terminal.
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
Information on the Software License for This Product
Software composition
■
The software included in this product is comprised of various software components whose individual copyrights
are held by SHARP or by third parties.
Software developed by SHARP and open source software
■
The copyrights for the software components and various relevant documents included with this product that were
developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties,
and other relevant laws. This product also makes use of freely distributed software and software components
whose copyrights are held by third parties. These include software components covered by a GNU General Public
License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.
Obtaining source code
■
Some of the open source software licensors require the distributor to provide the source code with the executable
software components. GPL and LGPL include similar requirements. For information on obtaining the source code
for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the
following website:
We are unable to answer any questions about the source code for the open source software. The source code for
the software components whose copyrights are held by SHARP is not distributed.
Acknowledgements
■
The following open source software components are included in this product:
• linux kernel/busybox/uClibc/zlib/libpng/libjpeg
CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number using the following procedure.
Press MENU to display the MENU screen, and then press
/
to select “Setup”.
c d
1
2
Press
/
to select “EZ Setup”, “CH Setup”, “Parental CTRL”, “Reset”, “Color System” or “Software Update”,
a b
and the Secret number input screen displays.
Press and hold both CH
and VOL on the TV simultaneously until the message appears on the screen.
r
k
3
The secret number is
.
• As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or
customer assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the
purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has
been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This
limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely
for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product
for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may
vary. Please contact 1-888-GO-SHARP for further information.
In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of
purchase to the servicer, which proof must include the date of purchase.
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or
implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR
PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF
PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy
available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are
permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all
liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,
whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way
responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,
lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defects in the
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.
Model Specific Section
Your Product Model Number & Description:
Warranty Period for this Product:
LC-32D64U/LC-37D64U LCD Color Television
(Be sure to have this information available when you need service for your
Product.)
One (1) year parts and labor from the date of purchase.
Additional Exclusions from
Warranty Coverage (if any):
In order for the Product to be serviced, the Product must be readily available
to the servicer, free and clear of any complex or non-standard installation,
mounting or other encumbrance which would unreasonably interfere with
servicing the Product. The Servicer will remount the Product after service,
provided that such remounting is not into a complex or non-standard installa-
tion. Any additional labor and materials required to remove and/or reinstall a
Product above and beyond the foregoing are not covered by this warranty,
may result in additional charges and are the responsibility of the consumer.
Image Retention resulting from a fixed image being displayed for long
periods of time is not covered by this Limited Warranty (see Operation
Manual on how to prevent this).
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United States. To find the
location of the nearest Sharp Authorized Servicer, please call Sharp toll free
at 1-800-BE-SHARP.
What to do to Obtain Service:
Contact your Sharp Authorized Servicer to obtain in home service for this
product. The Servicer will come to your location and if necessary remove the
unit for repair at the Servicer’s facility and return the set to you once
completed. Be sure to have Proof of Purchase available.
TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP
39
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensional Drawings
Unit: inch (mm)
LC-32D64U
30 9
/16 (776)
27 5
/8 (701.5)
18 29
/32 (480)
3 61
/
64
3 3
/
4
(95)
(100)
11 13
/16 (300)
2 9
/
16
(65)
10 3/4 (276)
LC-37D64U
35 23
/64 (898)
32 15
/32 (824.4)
18 29
/32 (480)
3 61
/
3 3
/
4
(95)
64
(100)
11 13
/16 (300)
2 9
/
16
(65)
10 3
/4 (276)
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Printed in Mexico
Imprimé au Mexique
Impreso en México
1
TINS-D490WJZZ
08P01-MX-NM
Download from Www.Somanuals.com. All Manuals Search And Download.
|