LC-13B2UB
LC-15B2UB
LC-20B2UB
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LIQUIDO
TELEVISOR DE CRISTAL
LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
PO
WER
SLEEP
M
E
N
U
Download from Www.Somanuals.com. All Manuals Search And Download.
LC-13B2UB
LC-15B2UB
LC-20B2UB
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is intended to alert
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within a
triangle is intended to alert the
user to the presence of impor-
tant operating and maintenance
(servicing) instructions in the
literature accompanying the
product.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
U.S.A. ONLY
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40
of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the Electronic Industries Alliance:
IMPORTANT:
To aid reporting in case of loss or theft, please
Model No.:
record the TV’s model and serial numbers in the
space provided. The numbers are located at the
rear of the TV.
Serial No.:
U.S.A. ONLY
Download from Www.Somanuals.com. All Manuals Search And Download.
2
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and
many years of trouble-free operation of your product, please read the Safety Precau-
tions carefully before using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the
product. To ensure your safety and prolong the service life of your LCD color TV product, please read
the following precautions carefully before using the product.
I Read instructions—All operating instructions must be read and understood before the product is
operated.
I Keep this manual in a safe place—These safety and operating instructions must be kept in a
safe place for future reference.
I Observe warnings—All warnings on the product and in the instructions must be observed
closely.
I Follow instructions—All operating instructions must be followed.
I Attachments—Do not use attachments not recommended by the manufacturer. Use of inad-
equate attachments can result in accidents.
I Power source—This product must operate on a power source specified on the specification
label. If you are not sure of the type of power supply used in your home, consult your dealer or
local power company. For units designed to operate on batteries or another power source, refer
to the operating instructions.
I Power cord protection—The power cords must be routed properly to prevent people from
stepping on them or objects from resting on them. Check the cords at the plugs and product.
I If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a
SHARP service center or your dealer.
I Overloading—Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
I Entering of objects and liquids—Never insert an object into the product through vents or open-
ings. High voltage flows in the product, and inserting an object can cause electric shock and/or
short internal parts. For the same reason, do not spill water or liquid on the product.
I Servicing—Do not attempt to service the product yourself. Removing covers can expose you to
high voltage and other dangerous conditions. Request a qualified service person to perform
servicing.
I Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and
request a qualified service person to perform repairs.
a.When the power cord or plug is damaged.
b.When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d.When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper
adjustment of controls not described in the instructions can cause damage, which often
requires extensive adjustment work by a qualified technician.
e.When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product
indicates that the product needs servicing.
I Replacement parts—In case the product needs replacement parts, make sure that the service
person uses replacement parts specified by the manufacturer, or those with the same character-
istics and performance as the original parts. Use of unauthorized parts can result in fire, electric
shock and/or other danger.
I Safety checks—Upon completion of service or repair work, request the service technician to
perform safety checks to ensure that the product is in proper operating condition.
I Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer.
I Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
IMPORTANT SAFETY PRECAUTIONS (Continued)
I Cleaning—Unplug the power cord from the AC outlet before
cleaning the product. Use a damp cloth to clean the product.
Do not use liquid cleaners or aerosol cleaners.
I Water and moisture—Do not use the product near water,
such as bathtub, washbasin, kitchen sink and laundry tub,
swimming pool and in a wet basement.
I Stand—Do not place the product on an unstable cart, stand,
tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal inju-
ries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manu-
facturer or sold with the product. When mounting the product
on a wall, be sure to follow the manufacturer’s instructions.
Use only the mounting hardware recommended by the
manufacturer.
I When relocating the product placed on a cart, it must be
moved with utmost care. Sudden stops, excessive force and
uneven floor surface can cause the product to fall from the
cart.
I Ventilation—The vents and other openings in the cabinet are
designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause over-
heating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar surface,
since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in
an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instruc-
tions are followed.
I The LCD panel used in this product is made of glass. There-
fore, it can break when the product is dropped or applied
with impact. Be careful not to be injured by broken glass
pieces in case the LCD panel breaks.
I Heat sources—Keep the product away from heat sources
such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
I The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine
picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
IMPORTANT SAFETY PRECAUTIONS (Continued)
I If an outside antenna is connected to the television equipment, be sure the antenna system is
grounded so as to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code provides information with respect to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, Iocation of antenna-discharge unit, connection to grounding elec-
trodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
NEC—NATIONAL ELECTRICAL CODE
(NEC ART 250, PART H)
I For added protection for this television equipment during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and dis-
connect the antenna. This will prevent damage to the equip-
ment due to lightning and power-line surges.
I An outside antenna system should not be located in the vi-
cinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
CONTENTS
Page
DEAR SHARP CUSTOMER ............................................................................................................. 3
IMPORTANT SAFETY PRECAUTIONS .......................................................................................3-5
SUPPLIED ACCESSORIES ............................................................................................................. 7
PREPARATION............................................................................................................................8-10
Using the Remote Control ......................................................................................................... 8
Batteries for the Remote Control.............................................................................................. 8
Power Connection ...................................................................................................................... 9
Antenna Connection .............................................................................................................9, 10
FRONT AND REAR CONTROL OPTIONS ............................................................................. 11-13
Removing the Back Cover ....................................................................................................... 13
Listening with Headphones ..................................................................................................... 13
REMOTE CONTROL ...................................................................................................................... 14
BASIC OPERATION ................................................................................................................. 15-18
Turning on POWER................................................................................................................... 16
Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes ................................................... 16
Sound Volume ........................................................................................................................... 17
ON/OFF Standby ....................................................................................................................... 17
Changing the Channels............................................................................................................ 18
SELECTING MENU ITEMS ............................................................................................................ 19
ADJUSTMENT .......................................................................................................................... 20-36
Adjusting the SLEEP TIMER Settings .................................................................................... 20
Adjusting the BRIGHTNESS Settings..................................................................................... 21
Adjusting the LANGUAGE Settings........................................................................................ 22
Adjusting the VIDEO ADJUST Settings ...........................................................................23, 24
Adjusting the PRESET Settings .............................................................................................. 25
SET UP ................................................................................................................................. 26-28
Adjusting the BLUE SCREEN Settings .................................................................................. 29
Adjusting the CLOSED CAPTION Settings ............................................................................ 30
Adjusting the V-CHIP Settings .......................................................................................... 31-36
CONNECTING WITH EXTERNAL DEVICES .......................................................................... 37-39
TROUBLESHOOTING ..............................................................................................................40, 41
SPECIFICATIONS (LC-13B2UB) ................................................................................................... 42
DIMENSIONAL DRAWINGS (LC-13B2UB)................................................................................... 43
SPECIFICATIONS (LC-15B2UB) ................................................................................................... 44
DIMENSIONAL DRAWINGS (LC-15B2UB)................................................................................... 45
SPECIFICATIONS (LC-20B2UB) ................................................................................................... 46
DIMENSIONAL DRAWINGS (LC-20B2UB)................................................................................... 47
Download from Www.Somanuals.com. All Manuals Search And Download.
6
SUPPLIED ACCESSORIES
Make sure the following accessories are provided with the product.
Remote Control
“AAA” Size (UM/SUM-4) Dry Battery (×2)
RRMCG1664CESB
UBATU0038CEZZ
AC Cord
Antenna Cable (2m)
QCNWG0003CEPA
AC Adapter
QACCD3097CEPA
Operation Manual
Cable Clamp (×2)
LC-13B2UB
LC-15B2UB
LC-20B2UB
LIQUID CRYSTAL TELEVISION
TÉLÉVISER ACL
TELEVISOR CON PANTALLA
DE CRISTAL LIQUIDO
TELEVISOR DE CRISTAL
LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
POWE
R
S
LEEP
MEN
U
UADP-0242CEPZ (LC-13B2UB/LC-15B2UB)
UADP-0243CEPZ (LC-20B2UB)
TINS-A181WJZZ
LHLDW0109CESB
Download from Www.Somanuals.com. All Manuals Search And Download.
7
PREPARATION
Using the Remote Control
I Use the remote control by pointing it towards the remote sensor window.
Objects between the remote control and sensor window may prevent
proper operation.
Cautions regarding use of remote control
I Do not expose the remote control to shock.
In addition, do not expose the remote control to liquids, and do not place
in an area with high humidity.
I Do not install or place the remote control under direct sunlight. The heat
may cause deformation of the unit.
I The remote control may not work properly if the remote sensor window
of the main unit is under direct sunlight or strong lighting. In such a
case, change the angle of the lighting or LCD TV set, or operate the
remote control closer to the remote sensor window.
Batteries for the Remote Control
If the remote control fails to operate the LCD color TV functions, replace the batteries in the remote
control.
2 Insert batteries (two “AAA”
size (UM/SUM-4) batteries,
supplied with product).
3 Close the battery
1 Open the battery
cover.
cover.
ー
＋
＋
ー
I Slide the cover while
pressing down.
I Place the batteries with their
terminals corresponding to
the (+) and (–) indications in
the battery compartment.
Caution!
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak chemicals.
• Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control is not used for an extended period of time, remove the batteries from the remote
control.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
PREPARATION (Continued)
Power Connection
W E R
P O
M A I N
T V / V I D E O
M E N U
C H
V O L
To DC input terminal
(DC 12V: LC-13B2UB/LC-15B2UB)
(DC 13V: LC-20B2UB)
Household power outlet
Plug into AC outlet.
AC adapter
AC cord
Note
G Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
G Always turn the main POWER switch of the LCD TV set to off when connecting the AC adapter.
G Always unplug the AC adapter from the product and power outlet when not using for a long period of time.
Antenna Connection
CABLE TV (CATV) CONNECTION
• A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-
ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the
scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this
is unknown, consult your cable TV company.) For more specific instructions on installing cable TV,
consult your cable TV company. One possible method of utilizing the converter/descrambler
provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
“A” position on the RF switch (not supplied) : You can view all unscrambled channels by using the
TV’s channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler by using the converter’s channel keys.
RF switch (not supplied)
Two-set
signal
Cable TV Line
splitter
(not
supplied)
IN
OUT
Cable TV converter/
descrambler
(not supplied)
Note
G Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be
required.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
PREPARATION (Continued)
Antenna Connection (Continued)
ANTENNAS
• The antenna requirements for good color television reception are more important than those for black & white
television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna
systems.
F-type connector
1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).
75-ohm coaxial cable (round)
2. A 300-ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300-75-ohm
adapter (not supplied).
300-ohm twin-lead cable (flat)
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antennas.
• Connect the outdoor antenna cable lead-in to the ANT. terminal on the rear of the TV set.
A. Combination VHF/UHF Antenna
300/75-ohm
adapter
(not supplied)
M A I N P O W E R
T V / V I D E O
VHF/UHF
antenna
M E N U
C H
V O L
VHF/UHF
antenna
or
300-ohm
twin-lead
75-ohm
coaxial cable
To antenna input
terminal
Antenna cable (supplied)
B. Separate VHF and/or
UHF Antennas
UHF
antenna
VHF
antenna
300-ohm
twin-lead
Combiner
(not supplied)
300-ohm
twin-lead
OUT
IN
or
75-ohm
coaxial cable
Download from Www.Somanuals.com. All Manuals Search And Download.
10
FRONT AND REAR CONTROL OPTIONS
Main unit (front view)
Upper control panel
MENU TV/VIDEO MAIN POWER
VOL
CH
LC-20B2UB
VOL (–)/(+)
MENU
MAIN POWER
CH ( )/(
)
TV/VIDEO
LC-13B2UB
LC-15B2UB
VOL
CH
MENU TV/VIDEO MAIN POWER
Speaker
Speaker
To change the vertical
angle of the LCD TV set,
tilt the screen up to 5
degrees forward or 10
degrees backward. The
TV set can also be
rotated 50 degrees
horizontally. Please adjust
the angle so that the TV
set can be watched most
comfortably.
PO
WER
SLEEP
SLEEP indicator
The SLEEP indicator lights up red when
the SLEEP TIMER is set to on.
Remote sensor window
POWER indicator
A green indicator lights when the power is
on and a red indicator lights when in the
standby mode (the indicator will not light
when the main power is off).
Note
G TV/VIDEO, CH ( )/( ), VOL (–)/(+), and MENU on the main unit have the same functions as the same buttons
on the remote control. Fundamentally, this operation manual provides a description based on operation with the
remote control.
G The LC-13B2UB, LC-15B2UB and LC-20B2UB have different external dimensions and the positions where the
names of the buttons are displayed also differ but the same operating procedures are followed for all three
models.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
FRONT AND REAR CONTROL OPTIONS (Continued)
Main unit (rear view)
VIDEO
VIDEO
AV-IN2/OUT
AUDIO (L)
AUDIO (R)
AV-IN2/OUT
L
AUDIO
R
COMPONENT
Y
Y
PB
B
P
PR
COMPONENT
R
P
AUDIO (L)
AUDIO (R)
L
AUDIO
R
R
E
W
O
P
N
I
A
M
O
E
D
I
/ V
V
U N
T
E
H C
M
L
O
V
VIDEO
VIDEO
AV-IN1
AUDIO (L)
L
AV-IN1
AUDIO
AUDIO (R)
S-VIDEO
R
S-VIDEO
HEADPHONE
HEAD
PHONE
Antenna terminal
ANT.
POWER INPUT
(DC 12V: LC-13B2UB/
LC-15B2UB)
POWER
INPUT
DC12V
(DC13V: LC-20B2UB)
Download from Www.Somanuals.com. All Manuals Search And Download.
12
FRONT AND REAR CONTROL OPTIONS (Continued)
Removing the Back Cover
I Before connecting a connection cord into the rear
terminal, remove the back cover. Push in the tab and
E R
W
O
P
N
I
A
M
E O D
V
/
I V
T
U N
E
M
H C
L
O
V
pull out the back cover carefully.
I To mount the cover, insert the 2 hooks on the
bottom of the cover into the cabinet and press
on the upper part of the back cover until the tab
locks in place with a click.
Listening with Headphones
I Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set.
O
T V / V I D E
M E N U
C H
V O L
ꢀ On-screen display
< Rear terminal
VOLUME
60
Headphones
Note
G Headphones are not included in the supplied accessories.
G No sound will be heard from the main unit speakers when a headphone mini-plug is connected into the
HEADPHONE jack.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
REMOTE CONTROL
POWER
POWER
DISPLAY
DISPLAY*1
SLEEP
BRIGHT
SLEEP
BRIGHT
MENU
MENU/
]/[/</>
(Cursor control)
MUTE
TV/VIDEO
MUTE
TV/VIDEO
FLASHBACK
VOL
CH
FLASHBACK*2
VOL(+)/(–)
CH ( )/(
)
1
4
2
5
8
0
3
6
Channel Select
7
9
MTS*3
MTS
100
*1 Displays the receiving
channel for 10 seconds.
*2 Returns to the previous
channel.
*3 Selects audio settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
BASIC OPERATION
This product is factory set to comply with the TV broadcasting system in the United States. For Brazil,
Argentina and Uruguay, set the color system according to the country before using this product by
following the table below.
I LC-13B2UB, LC-15B2UB
The VIDEO INPUT mode is compatible with color systems worldwide and is
automatically set.
* The World Multi Auto System
is compatible with all color
systems indicated below.
Factory setting of color system
User setting
TV
TV broadcasting
system
Country
U.S.A.
TV
Video
1 N358
2 N443
3 PAL
Color: NTSC
TV ch: US ch
NTSC (N358)
US ch
World Multi
Auto System
Not required
or N/A
4 PAL-M
5 PAL-N
6 SECAM
7 PAL-60
Canada, Mexico,
Latin America
Color: NTSC
TV ch: US ch
NTSC (N358)
US ch
World Multi
Auto System
Not required or N/A
Color: PAL-M
TV ch: US ch
NTSC (N358)
US ch
World Multi
Auto System
Set color system to
PAL-M (see page 24)
Brazil
Argentina,
Uruguay
Color: PAL-N
TV ch: US ch
NTSC (N358)
US ch
World Multi
Auto System
Set color system to
PAL-N (see page 24)
I LC-20B2UB
Factory setting of color system
User setting
TV/Video
TV broadcasting
system
Country
TV
Video
Color: NTSC
TV ch: US ch
NTSC (N358)
US ch
NTSC (N358)
US ch
Not required
or N/A
U.S.A.
Canada, Mexico,
Latin America
Color: NTSC
TV ch: US ch
NTSC (N358)
US ch
NTSC (N358)
US ch
Not required or N/A
Color: PAL-M
TV ch: US ch
NTSC (N358)
US ch
NTSC (N358)
US ch
Set color system to
PAL-M (see page 24)
Brazil
Argentina,
Uruguay
Color: PAL-N
TV ch: US ch
NTSC (N358)
US ch
NTSC (N358)
US ch
Set color system to
PAL-N (see page 24)
Note
G The 3 Dimensional Y/C separation circuit* only works when the color system is set to N358 in
TV mode and Video mode.
*The 3 Dimensional Y/C separation circuit is used to remove flickering and color bleeding.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
BASIC OPERATION (Continued)
Turning on POWER
ꢀ On-screen display
1 Press MAIN POWER, located on
MAIN POWER
the upper side of the main unit, to
on.
2
2 The POWER indicator instantane-
ously changes from red to green
and the main unit is turned on.
STEREO
SAP
<
ON A I R
Note
M
ONO
G The input mode indication disappears
PO
W
ER
SLE
EP
after several seconds.
Notes:
POWER indicator
Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes
1 Turn on the power of the connected
AV1 mode
POWER
video equipment.
AV 1
AV 2
POWER
2 Press TV/VIDEO and select the
applicable input source. The screen
displays AV1, AV2, COMPONENT
or TV mode each time TV/VIDEO is
pressed.
DISPLAY
SLEEP
BRIGHT
MENU
MUTE
TV/VIDEO
AV2 mode
FLASHBACK
Note
VOL
CH
TV/VIDEO
G The AV input mode indication remains
for 3 seconds.
AV1: Video equipment connected to the
AV1 input terminals.
1
4
7
2
5
8
0
3
6
•
9
An S-Video input terminal is
MTS
100
additionally provided for the AV1
input. If both the S-Video terminal
and normal video terminals are
connected with cables, the S-
Video input terminal takes priority.
AV2: AV2 mode is used to adjust the
preset settings and IN or OUT can
be selected. AV2 indication is not
displayed when OUT is selected.
(For details on setting AV-OUT,
see page 25.)
COMPONENT mode
COMPONENT
•
TV mode
12
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
BASIC OPERATION (Continued)
Sound Volume
1 Press VOL (+) to increase the sound
POWER
volume. The segment of the indicator
increases.
DISPLAY
VOLUME
50
SLEEP
BRIGHT
MENU
2 Press VOL (–) to decrease the sound
volume. The segment of the indicator
decreases.
MUTE
TV/VIDEO
FLASHBACK
VOLUME
10
VOL
CH
MUTE
To mute the sound
1
4
2
5
8
0
3
6
VOL
(+)/(–)
1 Press MUTE to temporarily turn off
7
9
the sound.
MTS
100
The MUTE mark
4 seconds.
is displayed for
MTS
2 Press MUTE or VOL (+)/(–) to turn
the sound back to the previous level.
The mute function is automatically
turned off when any of the following
buttons are pressed: POWER,
VOL (+)/(–), or MTS.
VOLUME
30
To select MTS (Multi ch TV Sound)
1 Press MTS to display the MTS
2
screen.
2 Press MTS to select the MTS
settings.
[STEREO]: stereo audio
[SAP]:
second audio program
[MONO]: monophonic audio
STEREO
SAP
<
ON A I R
Note
M
ONO
G <ON AIR appears when a STEREO or
SAP broadcast is being aired.
ON/OFF Standby
POWER
To turn off the LCD TV
DISPLAY
Press POWER on the remote control.
The POWER indicator will turn red.
SLEEP
BRIGHT
MENU
MUTE
TV/VIDEO
To turn the LCD TV back on
FLASHBACK
Press POWER again.
The POWER indicator will turn green.
VOL
CH
POWER
1
4
2
5
8
0
3
6
7
9
MTS
100
Download from Www.Somanuals.com. All Manuals Search And Download.
17
BASIC OPERATION (Continued)
Changing the Channels
Changing channels by using Channel Select on the remote control
• This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-
or 3-digit number.
To select a 1- or 2-digit channel
POWER
0 –
number (e.g., Channel 5):
DISPLAY
Complete the following procedure
SLEEP
BRIGHT
5
within 4 seconds.
MENU
1 Press the
2 Press the
button.
MUTE
TV/VIDEO
5
button.
FLASHBACK
VOL
CH
Note
G When selecting a 1-digit channel number,
do not fail to press the button first.
1
4
2
5
8
0
3
6
Channel
Select
7
9
MTS
100
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following procedure
within 4 seconds.
1 – –
1 1–
1 15
1 Press the
2 Press the
button.
button.
button.
5
3 Press the
Note
G The 3 -digit channel number can be
selected only when the receiving mode is
set to CABLE in CH-SETTING. (For details
on setting the receiving mode, see page
26.)
Changing channels with CH ( )/( ) on the remote control
Air
Press CH ( ) and the channels change in the order shown below:
2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .
Press CH ( ) and the channels change in the order shown below:
3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .
Cable Press CH ( ) and the channels change in the order shown below:
1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .
Press CH ( ) and the channels change in the order shown below:
3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .
Download from Www.Somanuals.com. All Manuals Search And Download.
18
SELECTING MENU ITEMS
Selecting Menu Items
• This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired
menu item by following the steps below and then refer to the indicated page for details.
(Page 20)
1 Press MENU to display the MENU
POWER
SLEEP T I
RETURN
M
ER
screen.
SLEEP T I
MER [ ––– RE
MA I N]
DISPLAY
SLEEP
BRIGHT
2 Press ]/[ to select the desired
menu item.
MENU
3 Press </ > to enter.
4 Press MENU to exit.
MUTE
TV/VIDEO
MENU/
]/[/
</ >
MENU
MENU
MENU
MENU
MENU
MENU
FLASHBACK
SELECT :
ADJUST :
EX I T :
EX I T :
EX I T :
EX I T :
EX I T :
EX I T :
VOL
CH
(Pages 23, 24)
V I DEO ADJUST ( TV )
M
ENU
RETURN
1
4
2
5
8
0
3
6
SLEEP T IMER
P I CTURE
T I NT
[
[
[
[
[
[
30 ]
0 ]
V IDEO ADJUST
PRESET
COLOR
0 ]
7
9
BLACK LEVEL
SHARPNESS
COLOR SYSTEM
RESET
0 ]
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
0 ]
MTS
100
N358 ]
SELECT :
ENTER :
(Pages 21, 25)
MENU
SELECT :
ENTER :
EX I T :
PRESET
RETURN
BR I GHTNESS
[ BR I GHT ]
AUTO PO
W
ER OFF [OFF
]
AL ]
AL ]
]
Note
UPS I DE
[NOR
M
M
R IGHT / LEFT
AV2 IN / OUT
[NOR
[ I N
G The displayed items differ depending
on the setting conditions.
G The selected item changes to yellow.
G Items in magenta cannot be selected.
G TV mode
This product is factory set to comply
with the color system in the United
States (NTSC-N358). For Brazil
(PAL-M), Argentina (PAL-N) and
Uruguay (PAL-N), set the color
system before using this product.
G To return to the previous screen,
select RETURN.
SELECT :
ADJUST :
(Page 30)
CLOSED CAPT ION
RETURN
MODE [OFF
DATA [ CH
]
]
1
G You can adjust some settings with the
special buttons: SLEEP and BRIGHT
(see page 20 and page 21).
SELECT :
ADJUST :
(Pages 33–36)
I LC-20B2UB
G The TINT display only appears when
the color system is set to N358 or
N443 in the NTSC mode.
INPUT SECRET NO.
–
–
–
–
I LC-13B2UB/LC-15B2UB
G The TINT display only appears when
the color system is set to N358 or
N443 or AUTO in the NTSC mode.
G COLOR SYSTEM
(Pages 22, 26–29)
When you set COLOR SYSTEM to
AUTO, the AUTO mode automatically
detects the receiving signal system
and adjusts the reception system of
the TV set.
When the picture or sound is not
stable, set a specific COLOR
SYSTEM (not AUTO). The picture
and sound may be improved.
SET UP
RETURN
BLUE SCREEN [OFF ]
LANGUAGE
CH–SETT I NG
SELECT :
ADJUST :
* The screen indications shown above are larger than actual for easy reading.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
ADJUSTMENT
Adjusting the SLEEP TIMER Settings
You can set the SLEEP TIMER to automatically turn off the TV.
Directly setting the SLEEP TIMER
1 Press SLEEP to display the SLEEP
POWER
TIMER screen.
DISPLAY
SLEEP
BRIGHT
MENU
MUTE
TV/VIDEO
SLEEP
MENU
FLASHBACK
VOL
CH
2 Press SLEEP to set the sleep timer
––– REMA I N
(in minutes).
1
4
2
5
8
0
3
6
The time can be set in increments
of 30 minutes and in the range
between 30 and 120 minutes.
7
9
MTS
100
The SLEEP TIMER is turned off
when --- is displayed.
Note
G The SLEEP TIMER screen automatically
disappears in 3 seconds.
60 REMA I N
Setting the SLEEP TIMER on the
MENU screen
POWER
1 Press MENU to display the MENU
M
ENU
DISPLAY
SLEEP T IMER
screen.
SLEEP
BRIGHT
V IDEO ADJUST
PRESET
2 Press ]/[ to move the cursor to
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
MENU
SLEEP TIMER.
MUTE
TV/VIDEO
3 Press </ > to display the SLEEP
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
TIMER screen.
MENU
SELECT :
ENTER :
EX I T :
1
4
2
5
8
0
3
6
7
9
SLEEP T I
M
ER
4 Press </ > to set the sleep timer
RETURN
MTS
100
(in minutes).
SLEEP T I
M
ER [ ––– REMA I N]
The time can be set in increments
of 30 minutes and in the range
between 30 and 120 minutes.
The SLEEP TIMER is turned off
when --- is displayed.
MENU
SELECT :
ADJUST :
EX I T :
5 Press MENU to return to the main
screen.
Note
G When you set the SLEEP TIMER, the SLEEP indicator lights.
G After you set the SLEEP TIMER, if you turn off the MAIN POWER on the TV set or press the POWER button on
the remote control, the SLEEP TIMER setting is canceled and the SLEEP indicator goes out.
G 5 minutes before the SLEEP TIMER turns off the TV, 5 REMAIN is displayed on the screen for 4 seconds. The
SLEEP TIMER counts down and shows a similar 4-second display for each remaining minute until the timer turns
off the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
ADJUSTMENT (Continued)
Adjusting the BRIGHTNESS Settings
You can set the brightness of the screen.
Directly setting the BRIGHTNESS
1 Press BRIGHT to display the
POWER
BRIGHTNESS screen.
DISPLAY
SLEEP
BRIGHT
2 Press BRIGHT to change the
setting.
MENU
MUTE
TV/VIDEO
BRIGHT
MENU
BRIGHT
NORMAL
DARK
FLASHBACK
VOL
CH
BR IGHTNESS [ BR I GHT ]
Note
1
4
2
5
8
0
3
6
G The BRIGHTNESS screen automatically
disappears in 3 seconds.
7
9
G [BRIGHT]: maximum brightness
[NORMAL]: 60% brightness (suitable for
viewing in a well-lit area and saves
energy)
MTS
100
[DARK]: 20% brightness (sufficiently bright
when viewing in a dimly lit area)
Setting the BRIGHTNESS on the
MENU screen
1 Press MENU to display the MENU
screen.
POWER
M
ENU
2 Press ]/[ to move the cursor to
SLEEP T IMER
DISPLAY
PRESET.
V IDEO ADJUST
PRESET
SLEEP
BRIGHT
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
3 Press </ > to enter.
MENU
MUTE
TV/VIDEO
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
MENU
SELECT :
ENTER :
EX I T :
1
4
7
2
5
8
0
3
6
4 Press ]/[ to move the cursor to
PRESET
RETURN
9
BRIGHTNESS.
BR I GHTNESS
[ BR I GHT ]
MTS
100
AUTO PO
W
ER OFF [OFF
]
AL ]
AL ]
]
5 Press </ > to set the brightness.
UPS I DE
[NOR
[NOR
[ I N
M
R IGHT / LEFT
AV2 IN/ OUT
M
6 Press MENU to return to the main
screen.
MENU
SELECT :
ADJUST :
EX I T :
Download from Www.Somanuals.com. All Manuals Search And Download.
21
ADJUSTMENT (Continued)
Adjusting the LANGUAGE Settings
The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH.
1 Press MENU to display the MENU
M
ENU
SLEEP T IMER
screen.
V IDEO ADJUST
PRESET
POWER
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
DISPLAY
SLEEP
BRIGHT
MENU
MUTE
TV/VIDEO
MENU
SELECT :
ENTER :
EX I T :
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
2 Press ]/[ to move the cursor to
M
ENU
SLEEP T IMER
SET UP.
1
4
2
5
8
0
3
6
V IDEO ADJUST
PRESET
3 Press </ > to enter.
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
7
9
MTS
100
MENU
MENU
MENU
SELECT :
ENTER :
EX I T :
EX I T :
EX I T :
4 Press ]/[ to move the cursor to
SET UP
RETURN
LANGUAGE.
BLUE SCREEN [OFF ]
LANGUAGE
5 Press </ > to enter.
CH–SETT I NG
SELECT :
ENTER :
6 Press ]/[ to select the lan-
LANGUAGE
ENGL I SH
guage.
ESPAÑOL
FRANCA I S
7 Press MENU to return to the main
screen.
SELECT :
Download from Www.Somanuals.com. All Manuals Search And Download.
22
ADJUSTMENT (Continued)
Adjusting the VIDEO ADJUST Settings
1 Press MENU to display the MENU
M
ENU
SLEEP T IMER
screen.
V IDEO ADJUST
PRESET
POWER
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
DISPLAY
SLEEP
BRIGHT
MENU
MUTE
TV/VIDEO
MENU
MENU
MENU
MENU
SELECT :
ENTER :
EX I T :
EX I T :
EX I T :
EX I T :
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
2 Press ]/[ to move the cursor to
M
ENU
SLEEP T IMER
VIDEO ADJUST.
V IDEO ADJUST
PRESET
1
4
2
5
8
0
3
6
3 Press </ > to enter.
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
7
9
MTS
100
SELECT :
ENTER :
4 Press ]/[ to move the cursor to
V IDEO ADJUST ( TV)
RETURN
the desired item.
P I CTURE
T I NT
[
[
[
[
[
[
30 ]
0 ]
5 Press </ > to enter.
COLOR
0 ]
BLACK LEVEL
SHARPNESS
COLOR SYSTEM
RESET
0 ]
0 ]
N358 ]
SELECT :
ENTER :
6 Press </ > to change the setting.
Note
G See page 24 for the settings.
RETURN
P I CTURE
30
7 Press MENU to return to the main
screen.
–
+
SELECT :
ADJUST :
Download from Www.Somanuals.com. All Manuals Search And Download.
23
ADJUSTMENT (Continued)
Adjusting the VIDEO ADJUST Settings (Continued)
TV mode
Selected item
PICTURE
Press <.
Press >.
Decrease contrast
Toward purple
Lower color intensity
Less bright
Increase contrast
Toward green
Higher color intensity
More bright
TINT
COLOR
BLACK LEVEL
SHARPNESS
COLOR SYSTEM
Soft picture
Sharp picture
AV mode
Selected item
PICTURE
TINT
Press <.
Press >.
Decrease contrast
Toward purple
Increase contrast
Toward green
Higher color intensity
More bright
COLOR
Lower color intensity
Less bright
BLACK LEVEL
SHARPNESS
RED-BLUE
GREEN
Soft picture
Hard picture
More red level
More blue level
More green level
Less green level
Press </ > to select the COLOR SYSTEM.
I LC-13B2UB/LC-15B2UB
COLOR SYSTEM
I When the COMPONENT mode is selected
I LC-20B2UB
Press </ > to select the COLOR SYSTEM.
COLOR SYSTEM
I When the COMPONENT mode is selected
Note
G TINT is displayed only when N358 or N443 is selected.
G In BLUE SCREEN, PICTURE setting displayed in magenta cannot be selected.
G Selecting RESET will return all settings to the factory settings.
G TV mode
This product is factory set to comply with the color system in the United States (NTSC-N358). For Brazil (PAL-M),
Argentina (PAL-N) or Uruguay (PAL-N), adjust the color system before using this product.
I LC-13B2UB/LC-15B2UB
G COLOR SYSTEM
When you set COLOR SYSTEM to AUTO, the AUTO mode automatically detects the receiving signal system and
adjusts the reception system of the TV set.
When the picture or sound is not stable, set a specific COLOR SYSTEM (not AUTO). The picture and sound may
be improved.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
ADJUSTMENT (Continued)
Adjusting the PRESET Settings
M
ENU
1 Press MENU to display the MENU
SLEEP T IMER
screen.
V IDEO ADJUST
PRESET
POWER
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
DISPLAY
SLEEP
BRIGHT
MENU
MUTE
TV/VIDEO
MENU
MENU
MENU
SELECT :
ENU
ENTER :
EX I T :
EX I T :
EX I T :
MENU/
]/[/
</ >
FLASHBACK
2 Press ]/[ to move the cursor to
VOL
CH
M
SLEEP T IMER
PRESET.
V IDEO ADJUST
PRESET
1
4
2
5
8
0
3
6
3 Press </ > to enter.
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
7
9
MTS
100
SELECT :
ENTER :
4 Press ]/[ to move the cursor to
PRESET
RETURN
the desired item.
BR I GHTNESS
[ BR I GHT ]
AUTO PO
W
ER OFF [OFF
]
AL ]
AL ]
]
5 Press </ > to change the setting.
UPS I DE
[NOR
[NOR
[ I N
M
R IGHT / LEFT
AV2 IN/ OUT
M
6 Press MENU to return to the main
screen.
SELECT :
ADJUST :
Selected item
BRIGHTNESS
Factory setting
Setting change
[BRIGHT] Maximum brightness [NORMAL] Brightness 60% → Suitable for viewing in a well-lit area.
Saves energy.
[DARK]
Brightness 20% → Sufficiently bright when
viewing in a dimly lit area.
AUTO POWER OFF
(only TV mode)
[OFF]
[ON]
The power of the LCD TV set is turned off when there is
no signal for 5 minutes.
[OFF]
This feature is inactive.
UPSIDE
[NORMAL] Normal vertical
image orientation
[DOWN] Inverted image → To display images upside down for
special uses.
A B C
RIGHT/LEFT
AV2 IN/OUT
[NORMAL] Normal horizontal
image orientation
[MIRROR] Mirror image → To display mirror images for special uses.
A B C
[IN]
[OUT
[OUT
] Line Output is selected, Output volume is fixed, Speaker
output is available.
] Line Output is selected, Output volume is variable,
Speaker output is Mute.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
ADJUSTMENT (Continued)
SET UP
I CHANNEL SETTING
It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV
programs.
1 Press MENU to display the MENU
MENU
SLEEP T IMER
screen.
V IDEO ADJUST
PRESET
2 Press ]/[ to move the cursor to
POWER
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
SET UP.
DISPLAY
SLEEP
BRIGHT
3 Press </ > to enter.
MENU
MENU
MUTE
TV/VIDEO
SELECT :
ENTER :
EX I T :
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
4 Press ]/[ to move the cursor to
SET UP
RETURN
CH-SETTING.
1
4
2
5
8
0
3
6
BLUE SCREEN [OFF ]
LANGUAGE
5 Press </ > to enter.
CH–SETT I NG
7
9
MTS
100
MENU
SELECT :
ENTER :
EX I T :
6 Press ]/[ to move the cursor to
CH–SETT ING
RETURN
AIR/CABLE.
A I R/ CABLE
CH SEARCH
7 Press </ > to enter.
CH
MEMORY
MENU
SELECT :
ENTER :
EX I T :
8 Press ]/[ to move the cursor to
A IR/ CABLE
A I R
the desired mode.
CABLE
9 Press MENU to return to the main
screen.
MENU
SELECT :
EX I T :
Note
G Receivable channels of your TV set are:
AIR channels:
CABLE channels:
1 (HRC and IRC mode only)
VHF: 2 through 13.
UHF: 14 through 69.
2 through 125 (STD, HRC and IRC)
Download from Www.Somanuals.com. All Manuals Search And Download.
26
ADJUSTMENT (Continued)
SET UP (Continued)
I Saving broadcast TV channels in the memory
1 Press MENU to display the MENU
M
ENU
SLEEP T IMER
screen, press ]/[ to move the
cursor to SET UP, and press </ >
to enter.
V IDEO ADJUST
PRESET
POWER
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
DISPLAY
SLEEP
BRIGHT
MENU
MUTE
TV/VIDEO
MENU
MENU
MENU
SELECT :
ENTER :
EX I T :
EX I T :
EX I T :
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
2 Press ]/[ to move the cursor to
CH-SETTING, and press </ > to
enter.
SET UP
RETURN
BLUE SCREEN [OFF ]
LANGUAGE
1
4
2
5
8
0
3
6
CH–SETT I NG
7
9
MTS
100
SELECT :
ENTER :
3 Press ]/[ to move the cursor to
CH SEARCH, and press </ > to
enter.
CH–SETT ING
RETURN
A I R/ CABLE
CH SEARCH
CH
MEMORY
SELECT :
ENTER :
4 Press >. The tuner will search
through all available channels in
your area and add them to the
TV’s memory.
CH SEARCH
A I R
2
Note
G To interrupt CH SEARCH, press <. CH
SEARCH will stop at the current
channel and will not add any higher
channels.
MENU
START :
EX I T :
5 Press MENU to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
ADJUSTMENT (Continued)
SET UP (Continued)
I Adding weak or additional channels or erasing unwanted channels from TV memory
1 Press MENU to display the MENU
M
ENU
SLEEP T IMER
screen, press ]/[ to move the
cursor to SET UP, and press </ >
to enter.
V IDEO ADJUST
PRESET
POWER
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
DISPLAY
SLEEP
BRIGHT
MENU
MENU
MUTE
TV/VIDEO
SELECT :
ENTER :
EX I T :
EX I T :
EX I T :
MENU/
]/[/
</ >
FLASHBACK
2 Press ]/[ to move the cursor
to CH-SETTING, and press </ >
to enter.
SET UP
VOL
CH
RETURN
BLUE SCREEN [OFF ]
LANGUAGE
1
4
2
5
8
0
3
6
CH–SETT I NG
Channel
Select
7
9
MTS
100
MENU
SELECT :
ENTER :
3 Press ]/[ to move the cursor to
CH MEMORY, and press </ > to
enter.
CH–SETT ING
RETURN
A I R/ CABLE
CH SEARCH
CH
MEMORY
4 Use ]/[ or Channel Select to
select each desired channel to add
or erase.
MENU
SELECT :
ENTER :
5 Press > to add the channel to the
TV’s memory or press < to erase
the channel from the TV’s memory.
CH MEMORY
A I R
2
6 Press MENU to exit.
MENU
TO ADD :
EX I T :
>
<
to add channel 2
to the TV memory
to erase channel 2
to the TV memory
CH MEMORY
A I R
2
MENU
TO ERASE :
EX I T :
Note
G If CH SEARCH is performed again, the previously memorized channels will be lost.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
ADJUSTMENT (Continued)
Adjusting the BLUE SCREEN Settings
I BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not received.
1 Press MENU to display the MENU
M
ENU
SLEEP T IMER
screen.
V IDEO ADJUST
PRESET
2 Press ]/[ to move the cursor to
POWER
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
SET UP.
DISPLAY
SLEEP
BRIGHT
3 Press </ > to enter.
MENU
MUTE
TV/VIDEO
MENU
MENU
MENU
SELECT :
ENTER :
EX I T :
EX I T :
EX I T :
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
4 Press ]/[ to move the cursor
SET UP
RETURN
to BLUE SCREEN.
BLUE SCREEN [OFF ]
LANGUAGE
1
4
2
5
8
0
3
6
CH–SETT I NG
7
9
MTS
100
SELECT :
ADJUST :
5 Press </ > to select ON or OFF.
SET UP
RETURN
BLUE SCREEN [ON
LANGUAGE
]
6 Press MENU to return to the main
screen.
CH–SETT I NG
SELECT :
ADJUST :
Note
G When received signals are weak or interfered with by some other signals, the BLUE SCREEN function may be
activated. To watch the TV under such conditions, set BLUE SCREEN to OFF.
G When the AV-IN1, AV-IN2 or COMPONENT input mode is selected, if no signal is being input, the BLUE SCREEN
function is activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
ADJUSTMENT (Continued)
Adjusting the CLOSED CAPTION Settings
I SETTING CLOSED CAPTION
• This TV set is equipped with an internal Closed Caption decoder. “Closed Caption” is
a system which allows conversations, narration, and sound effects in TV programs
and home videos to be viewed as captions on the TV screen (see the illustration).
• Not all the programs and videos will offer closed captioning. Please look for the “
symbol to ensure that captions will be shown.
”
• The Closed Caption broadcasts can be viewed in two modes: [CAPTION] and
[TEXT]. For each mode, two channels are available: CH1 and CH2.
The [CAPTION] mode shows subscripts of dialogs and commentaries of TV dramas
and news programs while allowing a clear view of the picture.
The [TEXT] mode displays various information over the picture (such as TV program
schedules and weather forecasts, etc.) that is independent of the TV programs.
1 Press MENU to display the MENU
M
ENU
POWER
SLEEP T IMER
screen.
V IDEO ADJUST
PRESET
DISPLAY
2 Press ]/[ to move the cursor to
SLEEP
BRIGHT
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
CLOSED CAPTION.
MENU
3 Press </ > to enter.
MUTE
TV/VIDEO
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
MENU
SELECT :
ENTER :
EX I T :
1
4
2
5
8
0
3
6
4 Press ]/[ to move the cursor to
CLOSED CAPT ION
RETURN
MODE or DATA.
[OFF
]
]
MODE
7
9
DATA [ CH
1
MTS
100
MENU
SELECT :
ADJUST :
EX I T :
5 Press </ > to change the CLOSED
CLOSED CAPT ION
RETURN
CAPTION setting.
[OFF
]
]
MODE
DATA [ CH
1
6 Press MENU to return to the main
screen.
CLOSED CAPT ION
RETURN
CH 1
CH 2
CAPTION
TEXT
DATA:
MODE:
[ CAPT ION]
MODE
DATA [ CH
2
]
OFF
Note
G If a broadcast has CLOSED CAPTION and MUTE is pressed, the set enters [CAPTION] mode automatically. Pressing
MUTE again will return the set to its previous condition.
G Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are
problems at the broadcast source. This does not necessarily indicate a problem with your set.
G If any button is pressed to call up the On-Screen Display while viewing a Closed Caption broadcast, the closed captions
will disappear momentarily.
G If no TEXT broadcast is being received while viewing in the [TEXT] mode, the screen may become dark and blank for
some programs. Should this occur, switch the Closed Caption mode to OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
ADJUSTMENT (Continued)
Adjusting the V-CHIP Settings
I V-CHIP
• This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents
children from watching violent or sexual scenes that may be harmful.
• Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and
the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age
and content.
• Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete
control.
[1] MPAA RATING
RATING
G
GENERAL AUDIENCES. All ages admitted.
PG
PG-13
R
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
age
base
NC-17
X
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.:
MPAA RATING (examples)
Example 1:
PG-13 in the age-based rating is
blocked, this will also automatically
block the higher ratings R, NC-17
and X.
Example 2:
R in the age-based rating is
blocked, this will also automatically
block the higher ratings NC-17 and
X.
ote:
Note
G The MPAA rating is only age-based.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
ADJUSTMENT (Continued)
Adjusting the V-CHIP Settings (Continued)
[2] TV PARENTAL GUIDELINES
content base
⇐
⇒
FV
(Fantasy
Violence)
V
S
L
D
RATING
(Violence)
(Sexual
Situation)
(Adult
Language)
(Sexually
Suggestive
Dialog)
TV-Y (All children)
TV-Y7 (Direct to Older Children)
TV-G (General Audience)
✕
⇑
X
age
TV-PG (Parental Guidance
Suggested)
base
✕
✕
✕
✕
✕
xxx
⇓
TV-14 (Parents Strongly
Cautioned)
✕
✕
✕
✕
✕
✕
X
X
TV-MA (Mature Audience Only)
: The content rating can be set, but this rating is not normally broadcast by TV stations.
✕: The content rating can be set.
TV PARENTAL GUIDELINES (examples)
Example 1:
When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block the higher ratings:TV-G, TV-PG, TV-14
and TV-MA. In addition, D, L, S, V and FV in CONTENT are automatically blocked unless you manually set BLOCK
CONTENT.
Example 2:
When no item in the age-based rating is blocked, D in the content-based rating will be automatically blocked.
Note
G Age-based ratings can be modified by the content-based ratings, but only in the combinations indicated by an X in
the table above.
G Choosing a lower age-based rating blocks the higher age-based ratings regardless of content rating settings.
G If you set TV-Y and TV-Y7 to BLOCK, CONTENT will display all items.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
ADJUSTMENT (Continued)
Adjusting the V-CHIP Settings (Continued)
I SETTING V-CHIP
[1] MPAA RATING
1 Press MENU to display the MENU
M
ENU
SLEEP T IMER
screen.
POWER
V IDEO ADJUST
PRESET
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
DISPLAY
SLEEP
BRIGHT
MENU
MUTE
TV/VIDEO
2 Press ]/[ to move the cursor
to V-CHIP BLOCK, and press
</ > to enter.
M
ENU
MENU/
]/[/
</ >
FLASHBACK
SLEEP T IMER
VOL
CH
V IDEO ADJUST
PRESET
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
1
4
2
5
8
0
3
6
Channel
Select
7
9
MTS
100
3 INPUT SECRET NO. will be
displayed. Input the 4-digit
secret number by using the
channel select keys.
INPUT SECRET NO.
–
–
–
–
MENU
EX I T :
4 Press ]/[ to move the cursor to
V–CH IP BLOCK
RETURN
MPAA, and press </ > to enter.
MPAA
TV GU IDEL I NES
STATUS [OFF ]
MENU
SELECT :
ENTER :
EX I T :
5 Press ]/[ to move the cursor to
PG, and then press </ > to select
BLOCK. If you set PG to BLOCK,
PG-13, R, NC-17 and X are
M
PAA
RETURN
G
[ ––––– ]
[ BLOCK ]
PG
PG–13 [ BLOCK ]
R
[ BLOCK ]
automatically blocked.
NC– 17 [ BLOCK ]
X
[ BLOCK ]
MENU
SELECT :
ADJUST :
EX I T :
6 Press MENU to return to the main
screen.
Note
G If you set G to BLOCK, all ratings are automatically blocked.
G If you set X to BLOCK, G, PG, PG-13, R and NC-17 are not blocked.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
ADJUSTMENT (Continued)
Adjusting the V-CHIP Settings (Continued)
[2] TV GUIDELINES
I Setting MPAA
1 Repeat steps 1 to 3 of [1] MPAA
RATING.
2 Press ]/[ to move the cursor to
V–CH IP BLOCK
POWER
RETURN
TV GUIDELINES.
M
PAA
3 Press </ > to enter.
TV GU IDEL I NES
DISPLAY
SLEEP
BRIGHT
STATUS [OFF ]
MENU
MUTE
TV/VIDEO
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
MENU
SELECT :
ENTER :
EX I T :
4 Press ]/[ to move the cursor to
TV-Y7, and press </ > to select
BLOCK. If you set TV-Y7 to
BLOCK, TV-G, TV-PG, TV-14 and
TV-MA are automatically blocked.
In addition, D, L, S, V and FV in
CONTENT are automatically
blocked.
1
4
2
5
8
0
3
6
TV GU IDEL I NES
RETURN
TV–Y [ ––––– ]
TV–Y7 [ BLOCK ]
TV–G [ BLOCK ]
TV–PG [ BLOCK ]
TV– 14 [ BLOCK ]
7
9
MTS
100
TV–M
A
[ BLOCK ]
BLOCK CONTENT
[D
L
S
V
FV ]
MENU
SELECT :
ADJUST :
EX I T :
5 Press MENU to return to the main
screen.
I Setting BLOCK CONTENT
1 Press ]/[ to move the cursor to
BLOCK CONTENT, and press
</ > to enter.
TV GU IDEL I NES
RETURN
TV–Y [ ––––– ]
TV–Y7 [ ––––– ]
TV–G [ ––––– ]
TV–PG [ ––––– ]
TV– 14 [ ––––– ]
POWER
DISPLAY
SLEEP
BRIGHT
TV–M
A
[ ––––– ]
MENU
BLOCK CONTENT
[
]
MUTE
TV/VIDEO
MENU
SELECT :
ENTER :
EX I T :
MENU/
]/[/
</ >
FLASHBACK
VOL
CH
2 Press ]/[ to move the cursor to
the desired item, and press </ >
to select BLOCK or ----- (un-
block).
BLOCK CONTENT
RETURN
1
4
2
5
8
0
3
6
D
L
[ ––––– ]
[ BLOCK ]
[ ––––– ]
[ ––––– ]
S
V
7
9
FV [ ––––– ]
MTS
100
MENU
SELECT :
ADJUST :
EX I T :
3 Press MENU to return to the main
screen.
Note
G If you set TV-14 to BLOCK, TV-MA is automatically blocked. Contents D, L, S and V are automatically blocked by X in the
table on page 32.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
ADJUSTMENT (Continued)
Adjusting the V-CHIP Settings (Continued)
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
1 Press MENU to display the MENU
MENU
SLEEP T IMER
screen.
V IDEO ADJUST
PRESET
POWER
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
DISPLAY
SLEEP
BRIGHT
MENU
2 Press ]/[ to move the cursor to
V-CHIP BLOCK, and press </ >
to enter.
MUTE
TV/VIDEO
M
ENU
SLEEP T IMER
MENU/
]/[/
</ >
FLASHBACK
V IDEO ADJUST
PRESET
VOL
CH
CLOSED CAPT ION
V–CH I P BLOCK
SET UP
1
4
2
5
8
0
3
6
Channel
Select
7
9
MTS
100
3 INPUT SECRET NO. will be
displayed. Input the 4-digit secret
number by using the channel
select keys. (The secret number is
not displayed on the screen.)
INPUT SECRET NO.
0
1
2
3
MENU
ENTER :
4 Press MENU to register the secret
number.
[4] CANCELING THE V-CHIP BLOCK SCREEN WHILE V-CHIP BLOCK IS ACTIVATED
1 V-CHIP HAS BEEN ACTIVATED
POWER
will be displayed if you watch the
program with Program Rating data
as same as you configured.
DISPLAY
V–CH I P HAS BEEN ACT I VATED
SLEEP
BRIGHT
TV–Y
Note
MENU
G V-CHIP HAS BEEN ACTIVATED will not be
MUTE
TV/VIDEO
displayed if STATUS is not configured to ON.
MENU
FLASHBACK
VOL
CH
2 Press MENU to display INPUT
1
4
2
5
8
0
3
6
SECRET NO.
Channel
Select
7
9
3 Input the 4-digit secret number by
using the channel select keys; V-
CHIP BLOCK is temporarily
canceled. If you input an incorrect
secret number, SECRET NO. IS
INCORRECT is displayed. In this
case, input the correct secret
number.
INPUT SECRET NO.
MTS
100
–
–
–
–
MENU
EX I T :
Note
G If you turn the power on from off, V-CHIP BLOCK will be activated again.
If you select V-CHIP BLOCK again by using MENU, V-CHIP BLOCK will be turned on again.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
ADJUSTMENT (Continued)
Adjusting the V-CHIP Settings (Continued)
[5] CHANGING THE V-CHIP BLOCK SETTINGS
1 Repeat steps 1 to 3 of [1] MPAA
POWER
RATING, then INPUT SECRET
NO. will be displayed.
DISPLAY
INPUT SECRET NO.
SLEEP
BRIGHT
–
–
–
–
MENU
MUTE
TV/VIDEO
FLASHBACK
VOL
CH
MENU
EX I T :
2 Input the 4-digit secret number by
using the channel select keys; the
V-CHIP select mode will be
displayed. Set V-CHIP BLOCK
again.
1
4
2
5
8
0
3
6
Channel
Select
7
9
INPUT SECRET NO.
MTS
100
* * * *
MENU
EX I T :
[6] CHANGING OR CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number as follows.
1 Repeat steps 1 to 3 of [1] MPAA
Upper control panel
of the main unit
RATING, or 1 to 2 of [4]
CANCELING THE V-CHIP
BLOCK SCREEN WHILE V-CHIP
BLOCK IS ACTIVATED, then
INPUT SECRET NO. will be
displayed.
VOL
CH
MENU
CH (
)
2 Press and hold both CH ( ) and
VOL (+) on the TV set simultane-
ously until the message INPUT
SECRET NO. blinks.
VOL (+)
MENU
• On the LC-20B2UB, the
names of the buttons are
displayed above the buttons
(see page 11).
3 Press MENU to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
CONNECTING WITH EXTERNAL DEVICES
You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals
located on the rear of the TV set.
When connecting an external device, turn off the power of the main unit first to prevent any possible
damage.
Example of external devices that can be connected
External devices that can be connected
to AV-IN2 terminal
External devices that can be connected
to AV-IN1 terminal
<Example>
• VCR
• Laser disc player
<Example>
• Video camera
• Home video game system
* If your external device has an
S-Video terminal, S-VIDEO
connection is recommended.
* If your external device has an S-Video terminal,
S-VIDEO connection is recommended.
External devices that can be connected
to COMPONENT terminal
R
E
W
O
P
N
I
A
M
O
E
D
I
/ V
V
T
U N
E
M
H C
L
O
V
<Example>
• DVD, etc.
UBN
* If your external device has a component
terminal, COMPONENT connection is
recommended (you can view high-quality
pictures). If your external device does not
have a component terminal, S-VIDEO
connection is recommended.
Note
:
G PC connection is not possible.
G For the cable, use a commercially available audio/video cord.
G Only connect audio/video signals to AV-IN1 and 2 terminals. Connecting other signals may result in a malfunction.
G AV-IN1 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals
(and if you select AV-IN1), you can only view pictures from the S-VIDEO terminal. To view the picture from the
VIDEO terminal, do not connect any external device to the S-VIDEO terminal.
G For more information about external device connections, see the manuals of your external devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
CONNECTING WITH EXTERNAL DEVICES (Continued)
Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT)
To AV-IN2 terminal
VIDEO
AV-IN2/OUT
L
AUDIO
R
Video
COMPONENT
Y
Audio (L)
B
P
R
P
Audio (R)
L
AUDIO
To audio/video output
terminal
R
VCR
To component input
(Video) terminal
R
E
W
O
P
N
I
A
M
O
E
D
I
V
/
V
T
U N
E
M
H C
L
O
V
Y
PB
PR
Audio (L)
Audio (R)
To component input
(Audio) terminal
X
/
DVD Player
To AV-IN1 terminal
Video
VIDEO
AV-IN1
Audio (L)
Audio (R)
L
AUDIO
R
To audio/video output
terminal
S-VIDEO
Video camera
VCR
HEAD
PHONE
To S-video input terminal
ANT.
S-Video
POWER
INPUT
DC12V
To S-video output terminal
Note
G If your VCR (or other external devices) has an S-Video terminal, S-VIDEO connection is recommended. (Use an
S-video cord.)
G When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select AV-IN1), you can
only view pictures from the S-VIDEO terminal.
G You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting
an external device, use care to connect the video and audio cables to the corresponding terminals.
G Do not connect antennas or headphones to AV-IN2.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
CONNECTING WITH EXTERNAL DEVICES (Continued)
Outputting video and audio (video output)
You can output video and audio data from the TV set through the AV output terminals (AV-OUT).
VIDEO
Connect a VCR,
AV-IN2/OUT
L
Audio amplifier,
etc.
AUDIO
R
R
E
W
O
P
N
I
A
M
O
E
D
I
/ V
V
U N
T
E
M
H C
L
O
V
COMPONENT
Y
B
P
R
P
L
AUDIO
R
Note
G AV2 has 2 OUT modes (see page 25).
G When using the S-Video input for AV-IN1, no video output will be made to the AV output terminal, but audio
output will be made for connection to external audio systems.
Note:
How to fix the cables
• Fix cables and cords with the attached cable clamps
R
E
W
O
P
I N
A
O
E
M
I D / V
V
T
U N
E
M
H C
L
O
V
so that they do not get caught when mounting the
cover.
• Connect the cables and cords after fixing the cable
clamps (2 positions).
Cable clamps
Download from Www.Somanuals.com. All Manuals Search And Download.
39
TROUBLESHOOTING
I Before calling for repair service, check the following items for possible remedies to
the encountered symptoms.
TV set
Reference
Pages
Problem
Check item
9
• Make sure the AC adapter is properly inserted in the
power outlet.
Picture
Sound
• Reception other than those of broadcasting stations
can be considered.
• Make sure the input mode is set to TV.
• Make sure the main power switch of the main unit is
on.
There is no
picture or
sound.
16
16
23, 24
• Make sure the BLACK LEVEL is properly adjusted.
• Fluorescent lamp may have reached the end of
service life.
There is no
picture.
There is no
picture from
AV-IN 1.
–
Picture
38
• Make sure the S-Video terminal is free of connections.
17
17
13
• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure that headphones are not connected.
There is no
sound.
9
–
• Make sure the antenna cable is properly connected.
• Consider whether TV signals are being properly
received.
There is no
picture or
sound, just
noise.
9
–
• Make sure the antenna cable is properly connected.
• Consider whether TV signals are being properly
received.
Picture is not
clear.
• Check color adjustment.
23, 24
• Check color system setting.
Picture is light
or improperly
tinted.
• Press the Brightness button.
• Check PICTURE and BLACK LEVEL adjustment.
• Fluorescent lamp may have reached the end of
service life.
23, 24
42, 44, 46
The picture is
too dark.
8
8
• Check the batteries of the remote controller.
• Make sure the remote sensor window is not under
strong fluorescent lighting.
Remote control does not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
TROUBLESHOOTING (Continued)
Antenna
Problem
Check item
• The reception may be weak.
• The state of the broadcast may also be bad.
• Make sure the antenna is facing the right direction.
• Make sure the outside antenna is not disconnected.
The picture is
not sharp.
The picture
moves.
• Make sure the antenna is facing the right direction.
• There may be reflected electric waves from mountains or
buildings.
The picture is
doubled or
tripled.
• There may be interference from automobiles, trains, high
voltage lines, neon lights, etc.
• There may be interference between the antenna cable and
power cable. Try positioning them further apart.
The picture is
spotted.
• Is the unit receiving interference from other devices?
Transmission antennas of radio broadcasting stations and
transmission antennas of amateur radios and cellular phones
may also cause interference.
• Use the unit as far apart as possible from devices that may
cause possible interference.
There are
stripes on the
screen or
colors fade.
I Use in hot and cold rooms (locations)
• When the unit is used in a low temperature rooms (location), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight
or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: –20°C to +60°C)
Download from Www.Somanuals.com. All Manuals Search And Download.
41
SPECIFICATIONS (LC-13B2UB)
Items
LC-13B2UB
Model
LCD panel
13” Advanced Super View & BLACK TFT LCD
921,600 dots VGA
Number of dots
Video color systems
N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60
USA/Latin A/Twn
Destination
TV Standard (CCIR)
TV Tuning System
STEREO
NTSC/PAL-M/PAL-N
PLL 181 ch.
TV function
MTS+SAP
CATV
125 ch.
4-LINE COMB FILTER
Brightness
Lamp life
Yes
430 cd/m2
60,000 hours
Viewing angles
Audio amplifier
Speakers
H: 170° V: 170°
2.1 W × 2
1-37/64 × 2-3/4 in. (4 × 7 cm), 2 pcs.
AV-IN1, S-VIDEO-IN
AV-IN2/AV-OUT
AV1
AV2
Terminals
COMPONENT
COMPONENT-IN, AUDIO-IN
F-Type
Antenna
Headphone
Mini-jack for stereo (3.5 ø)
English/French/Spanish
DC 12 V, AC 110–240 V, 50/60 Hz
9.5 lbs (4.3 kg), w/o accessories
OSD language
Power supply
Weight
Accessories
Remote control, Batteries, Antenna cable 2m,
AC adapter, AC cord, Cable clamps
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
DIMENSIONAL DRAWINGS (LC-13B2UB)
Unit: inch/mm
VOL
CH
MENU TV/VIDEO MAINPOWER
16.9/429
10.4/265
10.7/271.2
3.7/95.1
2.4/60.5
39.4/100
VIDEO
AV-IN1
L
AUDIO
R
VIDEO
S-VIDEO
AV-IN 2/OUT
L
AUDIO
R
HEAD
PHONE
Y
PB
ANT.
PR
COMPONENT
L
AUDIO
R
POWER
INPUT
DC12V
1.1/27
5.4/137.3
7.0/177.8
1.6/40.5
Download from Www.Somanuals.com. All Manuals Search And Download.
43
SPECIFICATIONS (LC-15B2UB)
Items
LC-15B2UB
Model
LCD panel
15” Advanced Super View & BLACK TFT LCD
921,600 dots VGA
Number of dots
Video color systems
N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60
USA/Latin A/Twn
Destination
TV Standard (CCIR)
TV Tuning System
STEREO
NTSC/PAL-M/PAL-N
PLL 181 ch.
TV function
MTS+SAP
CATV
125 ch.
4-LINE COMB FILTER
Brightness
Lamp life
Yes
430 cd/m2
60,000 hours
Viewing angles
Audio amplifier
Speakers
H: 170° V: 170°
2.1 W × 2
1-37/64 × 2-3/4 in. (4 × 7 cm), 2 pcs.
AV-IN1, S-VIDEO-IN
AV-IN2/AV-OUT
AV1
AV2
Terminals
COMPONENT
COMPONENT-IN, AUDIO-IN
F-Type
Antenna
Headphone
Mini-jack for stereo (3.5 ø)
English/French/Spanish
DC 12 V, AC 110–240 V, 50/60 Hz
11.5 lbs (5.2 kg), w/o accessories
OSD language
Power supply
Weight
Accessories
Remote control, Batteries, Antenna cable 2m,
AC adapter, AC cord, Cable clamps
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
DIMENSIONAL DRAWINGS (LC-15B2UB)
Unit: inch/mm
VOL
CH
MENU TV/VIDEO MAINPOWER
19.1/484
12.0/305.3
11.9/301.6
3.9/98.8
2.4/61.1
39.4/100
VIDEO
AV-IN1
L
AUDIO
R
VIDEO
S-VIDEO
AV-IN 2/OUT
L
AUDIO
R
HEAD
PHONE
COMPONENT
Y
P
B
R
ANT.
P
L
AUDIO
R
POWER
INPUT
DC12V
1.1/27
5.9/149.5
7.8/198
1.9/48.5
Download from Www.Somanuals.com. All Manuals Search And Download.
45
SPECIFICATIONS (LC-20B2UB)
Items
LC-20B2UB
Model
LCD panel
19.7” Advanced Super View & BLACK TFT LCD
921,600 dots VGA
Number of dots
Video color systems
N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60
USA/Latin A/Twn
Destination
TV Standard (CCIR)
TV Tuning System
STEREO
NTSC/PAL-M/PAL-N
PLL 181 ch.
TV function
MTS+SAP
CATV
125 ch.
3 Dimensional Y/C separation circuit
Yes (N358 only)
Digital comb filter
Brightness
Lamp life
Yes
430 cd/m2
60,000 hours
Viewing angles
Audio amplifier
Speakers
H: 170° V: 170°
2.5 W × 2
ø 2 in. (5 cm), 2 pcs.
AV-IN1, S-VIDEO-IN
AV-IN2/AV-OUT
AV1
AV2
Terminals
COMPONENT
Antenna
COMPONENT-IN, AUDIO-IN
F-Type
Headphone
Mini-jack for stereo (3.5 ø)
English/French/Spanish
DC 13 V, AC 110–240 V, 50/60 Hz
18.5 lbs (8.4 kg), w/o accessories
OSD language
Power supply
Weight
Accessories
Remote control, Batteries, Antenna cable, AC adapter,
AC cord, Cable clamps
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
DIMENSIONAL DRAWINGS (LC-20B2UB)
Unit: inch/mm
VOL
CH
MENU TV/VIDEO MAINPOWER
12.6/319
24.8/630
15.8/401.3
14.9/379
4.2/107.3
2.9/72.6
VIDEO
AV-IN1
L
AUDIO
R
VIDEO
AV-IN 2/OUT
L
S-VIDEO
AUDIO
R
HEAD
PHONE
COMPONENT
Y
P
B
R
ANT.
P
L
3.94/100
AUDIO
R
POWER
INPUT
DC12V
1.2/30.5
6.5/163.9
9.0/229.4
2.6/65.5
Download from Www.Somanuals.com. All Manuals Search And Download.
47
CALLING FOR SERVICE
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer
assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
END-USER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first end user purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
To the extent permitted by applicable state law, the warranties set forth herein are in lieu of, and exclusive of, all other
warranties, express or implied. Specifically, ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE
EXCLUDED. ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. If, under
applicable state law, implied warranties may not validly be disclaimed or excluded, the duration of such implied warranties is
limited to the period(s) from the date of purchase set forth below.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.
Model Specific Section
Your Product Model Number & Description:
LC-13B2UB LCD Color Television
LC-15B2UB LCD Color Television
LC-20B2UB LCD Color Television
(Be sure to have this information available when you need service for
your Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from
Warranty Coverage (if any):
None
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer, call
Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.
Be sure to have Proof of Purchase available. If you ship the Product,
be sure it is insured and packaged securely.
TO OBTAIN PRODUCT INFORMATION, CALL 1-888-LCD-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
48
VALID IN CANADA ONLY
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this
Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such
defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as
specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate
use as outlined in the owner’s manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres
or Sharp’s Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to
head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but
not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and
paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid
spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product
together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an
Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on any Sharp television with the
screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all
liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a
defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss
of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of
defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict
liability or otherwise.
WARRANTY PERIODS:
Parts & Labour (exceptions noted)
1 year
1 year
Audio Products
Camcorder
DVD Products
LCD Projector
LCD TV
1 year
1 year (lamp 90 days)
1 year
Microwave Oven
Television Products
VCR Product
Vacuum Cleaner
2 years (magnetron component-3 additional years)
1 year (picture tube component-1 additional year)
1 year
1 year
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East Mississauga, Ontario L4Z 1W9
For more information on this Warranty, Sharp Extended Warranty
Offers, Sharp Canada Products, Accessory Sales, Dealer or Service
Locations, Tronto please call (905) 568-7140
Visit our Web site: www.sharp.ca
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|