Sharp Flat Panel Television LC 13B2U User Manual

LC-13B2U  
LCD COLOR TELEVISION  
ENGLISH  
OPERATION MANUAL  
LC-13B2U-GBpp01-18  
1
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEAR SHARP CUSTOMER  
Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and  
many years of trouble-free operation of your product, please read the Safety Precau-  
tions carefully before using this product.  
IMPORTANT SAFETY PRECAUTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property  
damage if improperly handled. This product has been engineered and manufactured with the highest  
priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent  
potential danger, please observe the following instructions when installing, operating and cleaning the  
product. To ensure your safety and prolong the service life of your LCD color TV product, please read  
the following precautions carefully before using the product.  
I Read instructions—All operating instructions must be read and understood before the product is  
operated.  
I Keep this manual in a safe place—These safety and operating instructions must be kept in a  
safe place for future reference.  
I Observe warnings—All warnings on the product and in the instructions must be observed  
closely.  
I Follow instructions—All operating instructions must be followed.  
I Attachments—Do not use attachments not recommended by the manufacturer. Use of inad-  
equate attachments can result in accidents.  
I Power source—This product must operate on a power source specified on the specification  
label. If you are not sure of the type of power supply used in your home, consult your dealer or  
local power company. For units designed to operate on batteries or another power source, refer  
to the operating instructions.  
I Power cord protection—The power cords must be routed properly to prevent people from  
stepping on them or objects from resting on them. Check the cords at the plugs and product.  
I If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a  
SHARP service center or your dealer.  
I Overloading—Do not overload AC outlets or extension cords.  
Overloading can cause fire or electric shock.  
I Entering of objects and liquids—Never insert an object into the product through vents or open-  
ings. High voltage flows in the product, and inserting an object can cause electric shock and/or  
short internal parts. For the same reason, do not spill water or liquid on the product.  
I Servicing—Do not attempt to service the product yourself. Removing covers can expose you to  
high voltage and other dangerous conditions. Request a qualified service person to perform  
servicing.  
I Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and  
request a qualified service person to perform repairs.  
a.When the power cord or plug is damaged.  
b.When a liquid was spilled on the product or when objects have fallen into the product.  
c. When the product has been exposed to rain or water.  
d.When the product does not operate properly as described in the operating instructions.  
Do not touch the controls other than those described in the operating instructions. Improper  
adjustment of controls not described in the instructions can cause damage, which often  
requires extensive adjustment work by a qualified technician.  
e.When the product has been dropped or damaged.  
f. When the product displays an abnormal condition. Any noticeable abnormality in the product  
indicates that the product needs servicing.  
I Replacement parts—In case the product needs replacement parts, make sure that the service  
person uses replacement parts specified by the manufacturer, or those with the same character-  
istics and performance as the original parts. Use of unauthorized parts can result in fire, electric  
shock and/or other danger.  
I Safety checks—Upon completion of service or repair work, request the service technician to  
perform safety checks to ensure that the product is in proper operating condition.  
I Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the  
product according to the method recommended by the manufacturer.  
I Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a  
plug having one blade wider than the other). This plug will fit into the power outlet only one way.  
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the  
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the polarized plug.  
3
LC-13B2U-GBpp01-18  
3
01.4.11, 4:09 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY PRECAUTIONS (Continued)  
I Cleaning—Unplug the power cord from the AC outlet before  
cleaning the product. Use a damp cloth to clean the product.  
Do not use liquid cleaners or aerosol cleaners.  
I Water and moisture—Do not use the product near water,  
such as bathtub, washbasin, kitchen sink and laundry tub,  
swimming pool and in a wet basement.  
I Stand—Do not place the product on an unstable cart, stand,  
tripod or table. Placing the product on an unstable base can  
cause the product to fall, resulting in serious personal inju-  
ries as well as damage to the product. Use only a cart,  
stand, tripod, bracket or table recommended by the manu-  
facturer or sold with the product. When mounting the product  
on a wall, be sure to follow the manufacturer’s instructions.  
Use only the mounting hardware recommended by the  
manufacturer.  
I When relocating the product placed on a cart, it must be  
moved with utmost care. Sudden stops, excessive force and  
uneven floor surface can cause the product to fall from the  
cart.  
I Ventilation—The vents and other openings in the cabinet are  
designed for ventilation. Do not cover or block these vents  
and openings since insufficient ventilation can cause over-  
heating and/or shorten the life of the product. Do not place  
the product on a bed, sofa, rug or other similar surface,  
since they can block ventilation openings. This product is not  
designed for built-in installation; do not place the product in  
an enclosed place such as a bookcase or rack, unless  
proper ventilation is provided or the manufacturer’s instruc-  
tions are followed.  
I The LCD panel used in this product is made of glass. There-  
fore, it can break when the product is dropped or applied  
with impact. Be careful not to be injured by broken glass  
pieces in case the LCD panel breaks.  
I Heat sources—Keep the product away from heat sources  
such as radiators, heaters, stoves and other heat-generating  
products (including amplifiers).  
I The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine  
picture details.  
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.  
Please note that this does not affect the performance of your product.  
4
LC-13B2U-GBpp01-18  
4
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY PRECAUTIONS (Continued)  
I If an outside antenna is connected to the television equipment, be sure the antenna system is  
grounded so as to provide some protection against voltage surges and built-up static charges.  
Section 810 of the National Electrical Code provides information with respect to proper grounding  
of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,  
size of grounding conductors, Iocation of antenna-discharge unit, connection to grounding elec-  
trodes, and requirements for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
NECNATIONAL ELECTRICAL CODE  
(NEC ART 250, PART H)  
I For added protection for this television equipment during a  
lightning storm, or when it is left unattended and unused for  
long periods of time, unplug it from the wall outlet and dis-  
connect the antenna. This will prevent damage to the equip-  
ment due to lightning and power-line surges.  
I An outside antenna system should not be located in the vi-  
cinity of overhead power lines or other electric light or power  
circuits, or where it can fall into such power lines or circuits.  
When installing an outside antenna system, extreme care  
should be taken to keep from touching such power lines or  
circuits as contact with them might be fatal.  
5
LC-13B2U-GBpp01-18  
5
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Page  
DEAR SHARP CUSTOMER ............................................................................................................. 3  
IMPORTANT SAFETY PRECAUTIONS .......................................................................................3-5  
SUPPLIED ACCESSORIES ............................................................................................................. 7  
PREPARATION............................................................................................................................8-10  
Using the Remote Control ......................................................................................................... 8  
Batteries for the Remote Control.............................................................................................. 8  
Power Connection ...................................................................................................................... 9  
Antenna Connection .............................................................................................................9, 10  
FRONT AND REAR CONTROL OPTIONS ............................................................................. 11-13  
Removing the Back Cover ....................................................................................................... 13  
Listening with Headphones ..................................................................................................... 13  
REMOTE CONTROL ...................................................................................................................... 14  
BASIC OPERATION ................................................................................................................. 14-17  
Turning on POWER................................................................................................................... 15  
Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes ................................................... 15  
Sound Volume ........................................................................................................................... 16  
ON/OFF Standby ....................................................................................................................... 16  
Changing the Channels............................................................................................................ 17  
SELECTING MENU ITEMS ............................................................................................................ 18  
ADJUSTMENT .......................................................................................................................... 19-34  
Adjusting the SLEEP TIMER Settings .................................................................................... 19  
Adjusting the BRIGHTNESS Settings..................................................................................... 20  
Adjusting the LANGUAGE Settings........................................................................................ 21  
Adjusting the VIDEO ADJUST Settings ...........................................................................22, 23  
Adjusting the PRESET Settings .............................................................................................. 24  
SET UP .................................................................................................................................25, 26  
Adjusting the BLUE SCREEN Settings .................................................................................. 27  
Adjusting the CLOSED CAPTION Settings............................................................................ 28  
Adjusting the V-CHIP Settings .......................................................................................... 29-34  
CONNECTING WITH EXTERNAL DEVICES .......................................................................... 35-37  
TROUBLESHOOTING ..............................................................................................................38, 39  
SPECIFICATIONS........................................................................................................................... 40  
DIMENSIONAL DRAWINGS .......................................................................................................... 41  
6
LC-13B2U-GBpp01-18  
6
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUPPLIED ACCESSORIES  
Make sure the following accessories are provided with the product.  
Operation Manual  
Wireless Remote Control  
LC-13B2U  
LCD COLOR TELEVISION  
TÉLÉVISEUR COULEUR À  
ÉCRAN À CRISTAUX  
LIQUIDES (LCD)  
OPERATION MANUAL  
MODE D’EMPLOI  
MEN  
U
Printed in Japan  
Printed on post-consumer recycled paper.  
Imprimé sur du papier recyclé.  
Imprimé au Japon  
TINS-7417CEZZ  
TINS-7417CEZZ  
RRRMRCMGC1G515696C4ECSEASA  
AC Cord  
Antenna Cable  
QCNW-5730CEZZ  
AC Adapter  
QQAACCCCDD33008987CCEEZPZA  
Size AAA Dry Battery (×2)  
Cable Clamp (×2)  
12  
Z
LHLDW1028GEZZ  
LHLDW0109CEZZ  
UADP-0228CEPZ  
UBATU0026GEZZ  
7
LC-13B2U-GBpp01-18  
7
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
Using the Remote Control  
I Use the remote control by pointing it towards the remote sensor window.  
Objects between the remote control and sensor window may prevent  
proper operation.  
Cautions regarding use of remote control  
I Do not expose the remote control to shock.  
In addition, do not expose the remote control to liquids, and do not place  
in an area with high humidity.  
I Do not install or place the remote control under direct sunlight. The heat  
may cause deformation of the unit.  
I The remote control may not work properly if the remote sensor window  
of the main unit is under direct sunlight or strong lighting. In such a  
case, change the angle of the lighting or LCD TV set, or operate the  
remote control closer to the remote sensor window.  
Batteries for the Remote Control  
If the remote control fails to operate the LCD color TV functions, replace the batteries in the remote  
control.  
2 Insert batteries (two  
3 Close the battery  
1 Open the battery  
size-AAA batteries,  
cover.  
cover.  
supplied with product).  
I Slide the cover while  
pressing down.  
I Place the batteries with their  
terminals corresponding to  
the (+) and () indications in  
the battery compartment.  
Caution!  
Cautions regarding batteries  
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the  
instructions below.  
Place batteries with their terminals corresponding to the (+) and () indications.  
Different types of batteries have different characteristics. Do not mix batteries of different types.  
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new  
batteries and/or cause old batteries to leak chemicals.  
Remove batteries as soon as they are non-operable.  
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a  
cloth.  
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.  
If the remote control is not used for an extended period of time, remove the batteries from the remote  
control.  
8
LC-13B2U-GBpp01-18  
8
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION (Continued)  
Power Connection  
Connect to the DC input  
terminal of the product.  
Plug into AC outlet.  
Household power outlet  
To DC input terminal  
(DC 12V)  
AC adapter  
AC cord  
Notes:  
I Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.  
I Always turn the main POWER switch of the LCD TV set to off when connecting the AC adapter.  
I Always unplug the AC adapter from the product and power outlet when not using for a long period of time.  
Antenna Connection  
CABLE TV (CATV) CONNECTION  
A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-  
ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal.  
Some cable TV companies offer premium pay channels. Since the signals of these premium pay  
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber  
by the cable TV company. This converter/descrambler is necessary for normal viewing of the  
scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this  
is unknown, consult your cable TV company.) For more specific instructions on installing cable TV,  
consult your cable TV company. One possible method of utilizing the converter/descrambler  
provided by your cable TV company is explained below.  
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).  
Aposition on the RF switch (not supplied) : You can view all unscrambled channels by using the  
TVs channel keys.  
Bposition on the RF switch (not supplied) : You can view the scrambled channels via the converter/  
descrambler by using the converters channel keys.  
RF switch (not supplied)  
Two-set  
signal  
splitter  
(not  
Cable TV Line  
supplied)  
OUT  
IN  
Cable TV converter/  
descrambler  
(not supplied)  
Note:  
I Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be  
required.  
9
LC-13B2U-GBpp01-18  
9
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION (Continued)  
Antenna Connection (Continued)  
ANTENNAS  
The antenna requirements for good color television reception are more important than those for black & white  
television reception. For this reason, a good quality outdoor antenna is strongly recommended.  
The following is a brief explanation of the type of connections that are provided with the various antenna  
systems.  
F-type connector  
1. A 75-ohm system is generally a round cable with F-type  
connector that can easily be attached to a terminal without  
tools (not supplied).  
75-ohm coaxial cable (round)  
2. A 300-ohm system is a flat twin-leadcable that can be  
attached to a 75-ohm terminal through a 300-75-ohm  
adapter (not supplied).  
300-ohm twin-lead cable (flat)  
OUTDOOR ANTENNA CONNECTION  
Use one of the following two diagrams if you connect an outdoor antenna.  
A: Using a VHF/UHF combination outdoor antenna.  
B: Using separate VHF and/or UHF outdoor antennas.  
Connect the outdoor antenna cable lead-in to the ANT. terminal on the rear of the TV set.  
A. Combination VHF/UHF Antenna  
300/75-ohm  
adapter  
(not supplied)  
VHF/UHF  
antenna  
VHF/UHF  
antenna  
or  
300-ohm  
twin-lead  
To antenna input  
terminal  
75-ohm  
coaxial cable  
Antenna cable (supplied)  
B. Separate VHF and/or  
UHF Antennas  
UHF  
antenna  
VHF  
antenna  
300-ohm  
twin-lead  
Combiner  
(not supplied)  
300-ohm  
twin-lead  
IN OUT  
or  
75-ohm  
coaxial cable  
10  
LC-13B2U-GBpp01-18  
10  
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT AND REAR CONTROL OPTIONS  
Main unit (front view)  
Upper control panel  
VOL (–)/(+)  
CH ( )/(  
)
MENU  
TV/VIDEO  
MAIN POWER  
VOL  
CH  
MENU TV/VIDEO MAIN POWER  
Speaker  
Speaker  
To change the vertical  
angle of the LCD TV set,  
tilt the screen up to 10  
degrees forward or 20  
degrees backward. The  
TV set can also be  
rotated 90 degrees  
horizontally. Please adjust  
the angle so that the TV  
set can be watched most  
comfortably.  
SLEEP indicator  
The SLEEP indicator lights up red when  
the SLEEP TIMER is set to on.  
POWER indicator  
Remote sensor window  
(The actual location is not visible.)  
A green indicator lights when the power is  
on and a red indicator lights when in the  
standby mode (the indicator will not light  
when the main power is off).  
Note:  
I TV/VIDEO, CH ( )/( ), and VOL (+)/(–) on the main unit have the same functions as the same buttons on the  
remote control. Fundamentally, this operation manual provides a description based on operation with the remote  
control.  
11  
LC-13B2U-GBpp01-18  
11  
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT AND REAR CONTROL OPTIONS (Continued)  
Main unit (rear view)  
Antenna terminal  
ANT.  
VIDEO  
AV-IN2/OUT  
VIDEO  
AUDIO (L)  
AV-IN2/OUT  
L
AUDIO (R)  
AUDIO  
R
Y
COMPONENT  
Y
PB  
PR  
B
P
COMPONENT  
R
P
AUDIO (L)  
L
AUDIO (R)  
AUDIO  
R
HEADPHONE  
H E A D  
PHONE  
POWER INPUT  
(DC 12V)  
POWER  
INPUT  
DC12V  
AV-IN1  
VIDEO  
VIDEO  
L
AUDIO  
AUDIO (L)  
AV-IN1  
R
S-VIDEO  
AUDIO (R)  
S-VIDEO  
12  
LC-13B2U-GBpp01-18  
12  
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT AND REAR CONTROL OPTIONS (Continued)  
Removing the Back Cover  
I Before connecting a connection cord into the rear terminal, remove the  
back cover. Pull the back cover carefully.  
I Put back the cover by completely inserting the 2 hooks of the back  
cover into the rear of the TV set.  
Listening with Headphones  
I Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set.  
On-screen display  
Rear terminal >  
VOLUME  
60  
Headphones  
Notes:  
I Headphones are not included in the supplied accessories.  
I No sound will be heard from the main unit speakers when a headphone mini-plug is connected into the  
HEADPHONE jack.  
13  
LC-13B2U-GBpp01-18  
13  
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
POWER  
POWER  
DISPLAY  
DISPLAY*1  
SLEEP  
BRIGHT  
SLEEP  
BRIGHT  
MENU  
MENU/  
]/[/</> (Cursor control)  
MUTE  
TV/VIDEO  
MUTE  
TV/VIDEO  
FLASHBACK  
FLASHBACK*2  
VOL  
CH  
VOL(+)/()  
CH ( )/(  
)
1
4
2
5
8
0
3
6
Channel Select  
7
9
MTS*3  
MTS  
100  
*1 Displays the receiving chan-  
nel for 10 seconds.  
*2 Returns to the previous  
channel.  
*3 Selects audio settings.  
BASIC OPERATION  
This product is factory set to comply with the TV broadcasting system in the United States. For Brazil,  
Argentina and Uruguay, set the color system according to the country before using this product by  
following the table below.  
The VIDEO INPUT mode is compatible with color systems worldwide and is automatically set.  
* The World Multi Auto System  
is compatible with all color  
systems indicated below.  
Factory setting of color system  
User setting  
TV  
TV broadcasting  
system  
Country  
U.S.A.  
TV  
Video  
1 N358  
2 N443  
3 PAL  
Color: NTSC  
TV ch: US ch  
NTSC (N358)  
US ch  
World Multi  
Auto System  
Not required  
or N/A  
4 PAL-M  
5 PAL-N  
6 SECAM  
7 PAL-60  
Canada, Mexico,  
Latin America  
Color: NTSC  
TV ch: US ch  
NTSC (N358)  
US ch  
World Multi  
Auto System  
Not required or N/A  
Color: PAL-M  
TV ch: US ch  
NTSC (N358)  
US ch  
World Multi  
Auto System  
Set color system to  
PAL-M (see page 23)  
Brazil  
Argentina,  
Uruguay  
Color: PAL-N  
TV ch: US ch  
NTSC (N358)  
US ch  
World Multi  
Auto System  
Set color system to  
PAL-N (see page 23)  
14  
LC-13B2U-GBpp01-18  
14  
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION (Continued)  
Turning on POWER  
Control section of main unit  
On-screen display  
1 Press MAIN POWER, located on  
MAIN POWER  
the upper side of the main unit, to  
on.  
2
2 The POWER indicator instantane-  
ously changes from red to green  
and the main unit is turned on.  
STEREO  
SAP  
Note:  
M
ONO  
I The input mode indication disappears  
after several seconds.  
Notes:  
POWER indicator  
Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes  
1 Turn on the power of the connected  
AV1 mode  
POWER  
video equipment.  
AV 1  
AV 2  
POWER  
2 Press TV/VIDEO and select the  
applicable input source. The screen  
displays AV1, AV2, COMPONENT  
or TV mode each time TV/VIDEO is  
pressed.  
DISPLAY  
SLEEP  
BRIGHT  
MENU  
MUTE  
TV/VIDEO  
AV2 mode  
FLASHBACK  
Note:  
VOL  
CH  
TV/VIDEO  
I The AV input mode indication remains  
for 3 seconds.  
AV1: Video equipment connected to the  
AV1 input terminals.  
1
4
7
2
5
8
0
3
6
9
An S-Video input terminal is  
MTS  
100  
additionally provided for the AV1  
input. If both the S-Video terminal  
and normal video terminals are  
connected with cables, the S-  
Video input terminal takes priority.  
AV2: AV2 mode is used to adjust the  
preset settings and IN or OUT can  
be selected. AV2 indication is not  
displayed when OUT is selected.  
(For details on setting AV-OUT,  
see page 24.)  
COMPONENT mode  
COMPONENT  
TV mode  
12  
COMPONENT:  
Video equipment connected to the  
COMPONENT input terminals.  
15  
LC-13B2U-GBpp01-18  
15  
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION (Continued)  
Sound Volume  
1 Press VOL (+) to increase the sound  
POWER  
volume. The segment of the indicator  
increases.  
DISPLAY  
VOLUME  
50  
SLEEP  
BRIGHT  
MENU  
2 Press VOL () to decrease the sound  
volume. The segment of the indicator  
decreases.  
MUTE  
TV/VIDEO  
FLASHBACK  
VOLUME  
10  
VOL  
CH  
MUTE  
To mute the sound  
1
4
2
5
8
0
3
6
VOL  
(+)/()  
1 Press MUTE to temporarily turn off  
7
9
the sound.  
MTS  
100  
The MUTE mark  
4 seconds.  
is displayed for  
MTS  
2 Press MUTE or VOL (+)/() to turn  
the sound back to the previous level.  
The mute function is automatically  
turned off when any of the following  
buttons are pressed: POWER,  
VOL (+)/(), or MTS.  
VOLUME  
30  
To select MTS (Multi ch TV Sound)  
1 Press MTS to display the MTS  
2
screen.  
2 Press MTS to select the MTS  
settings.  
[STEREO]: stereo audio  
[SAP]:  
second audio program  
[MONO]: monophonic audio  
STEREO  
SAP  
M
ONO  
ON/OFF Standby  
To turn off the LCD TV  
POWER  
Press POWER on the remote control.  
The POWER indicator will turn red.  
DISPLAY  
SLEEP  
BRIGHT  
MENU  
To turn the LCD TV back on  
MUTE  
TV/VIDEO  
Press POWER again.  
FLASHBACK  
The POWER indicator will turn green.  
VOL  
CH  
POWER  
1
4
2
5
8
0
3
6
7
9
MTS  
100  
16  
LC-13B2U-GBpp01-18  
16  
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION (Continued)  
Changing the Channels  
Changing channels by using Channel Select on the remote control  
This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-  
or 3-digit number.  
To select a 1- or 2-digit channel  
POWER  
0 –  
number (e.g., Channel 5):  
DISPLAY  
Complete the following procedure  
SLEEP  
BRIGHT  
5
within 4 seconds.  
MENU  
1 Press the  
2 Press the  
button.  
MUTE  
TV/VIDEO  
5
button.  
FLASHBACK  
VOL  
CH  
Note:  
I When selecting a 1-digit channel number,  
do not fail to press the button first.  
1
4
2
5
8
0
3
6
Channel  
Select  
7
9
MTS  
100  
To select a 3-digit channel number  
(e.g., Channel 115):  
Complete the following procedure  
within 4 seconds.  
1 – –  
1 1–  
1 15  
1 Press the  
2 Press the  
3 Press the  
button.  
button.  
button.  
5
Changing channels with CH ( )/( ) on the remote control  
Air  
Press CH ( ) and the channels change in the order shown below:  
2 3 . . . 68 69 2 3 . . .  
Press CH ( ) and the channels change in the order shown below:  
3 2 69 68 . . . 3 2 . . .  
Cable Press CH ( ) and the channels change in the order shown below:  
1 2 3 . . . 125 1 2 3 . . .  
Press CH ( ) and the channels change in the order shown below:  
3 2 1 125 . . . 3 2 1 . . .  
17  
LC-13B2U-GBpp01-18  
17  
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING MENU ITEMS  
Selecting Menu Items  
This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired  
menu item by following the steps below and then refer to the indicated page for details.  
(Page 19)  
1 Press MENU to display the MENU  
POWER  
SLEEP T I  
RETURN  
M
ER  
screen.  
SLEEP T I  
M
ER [ –– REMA I N]  
DISPLAY  
SLEEP  
BRIGHT  
2 Press ]/[ to select the desired  
menu item.  
MENU  
3 Press </ > to enter.  
4 Press MENU to exit.  
MUTE  
TV/VIDEO  
MENU/  
]/[/  
</ >  
MENU  
MENU  
MENU  
MENU  
MENU  
MENU  
FLASHBACK  
SELECT :  
ADJUST :  
EX I T :  
EX I T :  
EX I T :  
EX I T :  
EX I T :  
EX I T :  
VOL  
CH  
(Pages 22, 23)  
V I DEO ADJUST ( TV )  
RETURN  
1
4
2
5
8
0
3
6
P I CTURE  
T I NT  
[
[
[
[
[
[
30 ]  
0 ]  
COLOR  
0 ]  
M
ENU  
7
9
BLACK LEVEL  
SHARPNESS  
COLOR SYSTEM  
RESET  
0 ]  
SLEEP T IMER  
0 ]  
MTS  
100  
V IDEO ADJUST  
PRESET  
N358 ]  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
SELECT :  
ENTER :  
(Pages 20, 24)  
PRESET  
RETURN  
BR I GHTNESS  
[ BR I GHT ]  
MENU  
AUTO PO  
W
ER OFF [OFF  
]
AL ]  
AL ]  
]
SELECT :  
ENTER :  
EX I T :  
UPS I DE  
[NOR  
M
M
R IGHT / LEFT  
AV2 I N / OUT  
[NOR  
[ I N  
Notes:  
I The TINT display only appears when  
the color system is set to N358 or  
N443 or AUTO in the NTSC mode.  
I The displayed items differ depending  
on the setting conditions.  
I The selected item changes to yellow.  
I Items in magenta cannot be selected.  
I TV mode  
This product is factory set to comply  
with the color system in the United  
States (NTSC-N358). For Brazil  
(PAL-M), Argentina (PAL-N) and  
Uruguay (PAL-N), set the color  
system before using this product.  
I COLOR SYSTEM  
When you set COLOR SYSTEM to  
AUTO, the AUTO mode automatically  
detects the receiving signal system  
and adjusts the reception system of  
the TV set.  
When the picture or sound is not  
stable, set a specific COLOR  
SYSTEM (not AUTO). The picture  
and sound may be improved.  
I To return to the previous screen,  
select RETURN.  
I You can adjust some settings with the  
special buttons: SLEEP and BRIGHT  
(see page 19 and page 20).  
SELECT :  
ADJUST :  
(Page 28)  
CLOSED CAPT ION  
RETURN  
MODE [OFF  
DATA [ CH  
]
]
1
SELECT :  
ADJUST :  
(Pages 3134)  
INPUT SECRET NO.  
(Pages 21, 2527)  
SET UP  
RETURN  
BLUE SCREEN [OFF ]  
LANGUAGE  
CHSETT I NG  
SELECT :  
ADJUST :  
* The screen indications shown above are larger than actual for easy reading.  
18  
LC-13B2U-GBpp01-18  
18  
01.3.27, 10:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT  
Adjusting the SLEEP TIMER Settings  
You can set the SLEEP TIMER to automatically turn off the TV.  
Directly setting the SLEEP TIMER  
1 Press SLEEP to display the SLEEP  
POWER  
TIMER screen.  
DISPLAY  
SLEEP  
BRIGHT  
MENU  
MUTE  
TV/VIDEO  
SLEEP  
MENU  
FLASHBACK  
VOL  
CH  
2 Press SLEEP to set the sleep timer  
––– REMA I N  
(in minutes).  
1
4
2
5
8
0
3
6
The time can be set in increments  
of 30 minutes and in the range  
between 30 and 120 minutes.  
7
9
MTS  
100  
The SLEEP TIMER is turned off  
when --- is displayed.  
Note:  
I The SLEEP TIMER screen automatically  
disappears in 3 seconds.  
60 REMA I N  
Setting the SLEEP TIMER on the  
MENU screen  
POWER  
1 Press MENU to display the MENU  
M
ENU  
DISPLAY  
SLEEP T IMER  
screen.  
SLEEP  
BRIGHT  
V IDEO ADJUST  
PRESET  
2 Press ]/[ to move the cursor to  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
MENU  
SLEEP TIMER.  
MUTE  
TV/VIDEO  
3 Press </ > to display the SLEEP  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
TIMER screen.  
MENU  
SELECT :  
ENTER :  
EX I T :  
1
4
2
5
8
0
3
6
7
9
SLEEP T I  
M
ER  
4 Press </ > to set the sleep timer  
RETURN  
MTS  
100  
(in minutes).  
SLEEP T I  
M
ER [ –– REMA I N]  
The time can be set in increments  
of 30 minutes and in the range  
between 30 and 120 minutes.  
The SLEEP TIMER is turned off  
when --- is displayed.  
MENU  
SELECT :  
ADJUST :  
EX I T :  
5 Press MENU to return to the main  
screen.  
Notes:  
I When you set the SLEEP TIMER, the SLEEP indicator lights.  
I After you set the SLEEP TIMER, if you turn off the MAIN POWER on the TV set or press the POWER button on  
the remote control, the SLEEP TIMER setting is cancelled and the SLEEP indicator goes out.  
I 5 minutes before the SLEEP TIMER turns off the TV, 5 REMAIN is displayed on the screen for 4 seconds. The  
SLEEP TIMER counts down and shows a similar 4-second display for each remaining minute until the timer turns  
off the TV.  
19  
LC-13B2U-GBpp19-42  
19  
01.3.28, 9:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the BRIGHTNESS Settings  
You can set the brightness of the screen.  
Directly setting the BRIGHTNESS  
1 Press BRIGHT to display the  
POWER  
BRIGHTNESS screen.  
DISPLAY  
SLEEP  
BRIGHT  
2 Press BRIGHT to change the  
setting.  
MENU  
MUTE  
TV/VIDEO  
BRIGHT  
MENU  
BRIGHT  
NORMAL  
DARK  
FLASHBACK  
VOL  
CH  
BR IGHTNESS [ BR I GHT ]  
Notes:  
1
4
2
5
8
0
3
6
I The BRIGHTNESS screen automatically  
disappears in 3 seconds.  
7
9
I [BRIGHT]: maximum brightness  
[NORMAL]: 60% brightness (suitable for  
viewing in a well-lit area and saves  
energy)  
MTS  
100  
[DARK]: 20% brightness (sufficiently bright  
when viewing in a dimly lit area)  
Setting the BRIGHTNESS on the  
MENU screen  
1 Press MENU to display the MENU  
screen.  
POWER  
M
ENU  
2 Press ]/[ to move the cursor to  
SLEEP T IMER  
DISPLAY  
PRESET.  
V IDEO ADJUST  
PRESET  
SLEEP  
BRIGHT  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
3 Press </ > to enter.  
MENU  
MUTE  
TV/VIDEO  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
MENU  
SELECT :  
ENTER :  
EX I T :  
1
4
7
2
5
8
0
3
6
4 Press ]/[ to move the cursor to  
PRESET  
RETURN  
9
BRIGHTNESS.  
BR I GHTNESS  
[ BR I GHT ]  
MTS  
100  
AUTO PO  
W
ER OFF [OFF  
]
AL ]  
AL ]  
]
5 Press </ > to set the brightness.  
UPS I DE  
[NOR  
[NOR  
[ I N  
M
R IGHT / LEFT  
AV2 IN/ OUT  
M
6 Press MENU to return to the main  
screen.  
MENU  
SELECT :  
ADJUST :  
EX I T :  
20  
LC-13B2U-GBpp19-42  
20  
01.3.28, 9:38 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the LANGUAGE Settings  
The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH.  
1 Press MENU to display the MENU  
M
ENU  
SLEEP T IMER  
screen.  
V IDEO ADJUST  
PRESET  
POWER  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
DISPLAY  
SLEEP  
BRIGHT  
MENU  
MUTE  
TV/VIDEO  
MENU  
SELECT :  
ENTER :  
EX I T :  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
2 Press ]/[ to move the cursor to  
M
ENU  
SLEEP T IMER  
SET UP.  
1
4
2
5
8
0
3
6
V IDEO ADJUST  
PRESET  
3 Press </ > to enter.  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
7
9
MTS  
100  
MENU  
MENU  
MENU  
SELECT :  
ENTER :  
EX I T :  
EX I T :  
EX I T :  
4 Press ]/[ to move the cursor to  
SET UP  
RETURN  
LANGUAGE.  
BLUE SCREEN [OFF ]  
LANGUAGE  
5 Press </ > to enter.  
CHSETT I NG  
SELECT :  
ENTER :  
6 Press ]/[ to select the lan-  
LANGUAGE  
ENGL I SH  
guage.  
ESPAÑOL  
FRANCA I S  
7 Press MENU to return to the main  
screen.  
SELECT :  
21  
LC-13B2U-GBpp19-42  
21  
01.3.27, 10:35 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the VIDEO ADJUST Settings  
1 Press MENU to display the MENU  
M
ENU  
SLEEP T IMER  
screen.  
V IDEO ADJUST  
PRESET  
POWER  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
DISPLAY  
SLEEP  
BRIGHT  
MENU  
MUTE  
TV/VIDEO  
MENU  
MENU  
MENU  
SELECT :  
ENTER :  
EX I T :  
EX I T :  
EX I T :  
EX I T :  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
2 Press ]/[ to move the cursor to  
M
ENU  
SLEEP T IMER  
VIDEO ADJUST.  
V IDEO ADJUST  
PRESET  
1
4
2
5
8
0
3
6
3 Press </ > to enter.  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
7
9
MTS  
100  
SELECT :  
ENTER :  
4 Press ]/[ to move the cursor to  
V IDEO ADJUST ( TV)  
RETURN  
the desired item.  
P I CTURE  
T I NT  
[
[
[
[
[
[
30 ]  
0 ]  
5 Press </ > to enter.  
COLOR  
0 ]  
BLACK LEVEL  
SHARPNESS  
COLOR SYSTEM  
RESET  
0 ]  
0 ]  
N358 ]  
SELECT :  
ENTER :  
6 Press </ > to change the setting.  
Note:  
I See page 23 for the settings.  
RETURN  
P I CTURE  
30  
7 Press MENU to return to the main  
screen.  
+
MENU  
SELECT :  
ADJUST :  
22  
LC-13B2U-GBpp19-42  
22  
01.3.27, 10:35 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the VIDEO ADJUST Settings (Continued)  
TV mode  
Selected item  
PICTURE  
Press <.  
Press >.  
Decrease contrast  
Toward purple  
Lower color intensity  
Less bright  
Increase contrast  
Toward green  
Higher color intensity  
More bright  
TINT  
COLOR  
BLACK LEVEL  
SHARPNESS  
COLOR SYSTEM  
Soft picture  
Sharp picture  
AV mode  
Selected item  
PICTURE  
Press <.  
Press >.  
Decrease contrast  
Toward purple  
Increase contrast  
Toward green  
Higher color intensity  
More bright  
TINT  
COLOR  
Lower color intensity  
Less bright  
BLACK LEVEL  
SHARPNESS  
RED-BLUE  
GREEN  
Soft picture  
Hard picture  
More red level  
More blue level  
More green level  
Less green level  
Press </ > to select the COLOR SYSTEM.  
COLOR SYSTEM  
I When the COMPONENT mode is selected  
Notes:  
I TINT is displayed only when N358 or N443 is selected.  
I In BLUE SCREEN, PICTURE setting displayed in magenta cannot be selected.  
I Selecting RESET will return all settings to the factory settings.  
I TV mode  
This product is factory set to comply with the color system in the United States (NTSC-N358). For Brazil (PAL-  
M), Argentina (PAL-N) or Uruguay (PAL-N), adjust the color system before using this product.  
I COLOR SYSTEM  
When you set COLOR SYSTEM to AUTO, the AUTO mode automatically detects the receiving signal system  
and adjusts the reception system of the TV set.  
When the picture or sound is not stable, set a specific COLOR SYSTEM (not AUTO). The picture and sound  
may be improved.  
23  
LC-13B2U-GBpp19-42  
23  
01.3.27, 10:35 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the PRESET Settings  
M
ENU  
1 Press MENU to display the MENU  
SLEEP T IMER  
screen.  
V IDEO ADJUST  
PRESET  
POWER  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
DISPLAY  
SLEEP  
BRIGHT  
MENU  
MUTE  
TV/VIDEO  
MENU  
MENU  
MENU  
SELECT :  
ENU  
ENTER :  
EX I T :  
EX I T :  
EX I T :  
MENU/  
]/[/  
</ >  
FLASHBACK  
2 Press ]/[ to move the cursor to  
VOL  
CH  
M
SLEEP T IMER  
PRESET.  
V IDEO ADJUST  
PRESET  
1
4
2
5
8
0
3
6
3 Press </ > to enter.  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
7
9
MTS  
100  
SELECT :  
ENTER :  
4 Press ]/[ to move the cursor to  
PRESET  
RETURN  
the desired item.  
BR I GHTNESS  
[ BR I GHT ]  
AUTO PO  
W
ER OFF [OFF  
]
AL ]  
AL ]  
]
5 Press </ > to change the setting.  
UPS I DE  
[NOR  
[NOR  
[ I N  
M
R IGHT / LEFT  
AV2 IN/ OUT  
M
6 Press MENU to return to the main  
screen.  
SELECT :  
ADJUST :  
Selected item  
BRIGHTNESS  
Factory setting  
Setting change  
[BRIGHT] Maximum brightness [NORMAL] Brightness 60% Suitable for viewing in a well-lit area.  
Saves energy.  
[DARK]  
Brightness 20% Sufficiently bright when  
viewing in a dimly lit area.  
AUTO POWER OFF  
(only TV mode)  
[OFF]  
[ON]  
The power of the LCD TV set is turned off when there is  
no signal for 5 minutes.  
[OFF]  
This feature is inactivated.  
UPSIDE  
[NORMAL] Normal vertical  
image orientation  
[DOWN] Inverted image To display images upside down for  
special uses.  
A B C  
RIGHT/LEFT  
AV2 IN/OUT  
[NORMAL] Normal horizontal  
image orientation  
[MIRROR] Mirror image To display mirror images for special uses.  
A B C  
[IN]  
[OUT  
[OUT  
] Line Output is selected, Output volume is fixed, Speaker  
output is available.  
] Line Output is selected, Output volume is variable,  
Speaker output is Mute.  
24  
LC-13B2U-GBpp19-42  
24  
01.3.27, 10:36 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
SET UP  
I CHANNEL SETTING  
It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV  
programs.  
1 Press MENU to display the MENU  
MENU  
SLEEP T IMER  
screen.  
V IDEO ADJUST  
PRESET  
POWER  
2 Press ]/[ to move the cursor to  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
SET UP.  
DISPLAY  
SLEEP  
BRIGHT  
3 Press </ > to enter.  
MENU  
MENU  
MUTE  
TV/VIDEO  
SELECT :  
ENTER :  
EX I T :  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
4 Press ]/[ to move the cursor to  
SET UP  
RETURN  
CH-SETTING.  
1
4
2
5
8
0
3
6
BLUE SCREEN [OFF ]  
LANGUAGE  
5 Press </ > to enter.  
CHSETT I NG  
7
9
MTS  
100  
MENU  
SELECT :  
ENTER :  
EX I T :  
6 Press ]/[ to move the cursor to  
CHSETT ING  
RETURN  
AIR/CABLE.  
A I R/ CABLE  
CH SEARCH  
7 Press </ > to enter.  
CH  
MEMORY  
MENU  
SELECT :  
ENTER :  
EX I T :  
8 Press ]/[ to move the cursor to  
A IR/ CABLE  
A I R  
the desired mode.  
CABLE  
9 Press MENU to return to the main  
screen.  
MENU  
SELECT :  
EX I T :  
Note:  
I Receivable channels of your TV set are:  
AIR channels:  
CABLE channels:  
1 (HRC and IRC mode only)  
VHF: 2 through 13.  
UHF: 14 through 69.  
2 through 125 (STD, HRC and IRC)  
25  
LC-13B2U-GBpp19-42  
25  
01.3.27, 10:36 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
SET UP (Continued)  
I Saving broadcast TV channels in the memory  
1 Press MENU to display the MENU  
screen, press ]/[ to move the  
cursor to SET UP, and press </ >  
to enter.  
POWER  
DISPLAY  
2 Press ]/[ to move the cursor to  
CH-SETTING, and press </ > to  
enter.  
SLEEP  
BRIGHT  
MENU  
MUTE  
TV/VIDEO  
3 Press ]/[ to move the cursor to  
CH SEARCH, and press </ > to  
enter.  
CHSETT ING  
RETURN  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
A I R/ CABLE  
CH SEARCH  
CH  
MEMORY  
1
4
2
5
8
0
3
6
7
9
4 Press >. The tuner will search  
through all available channels in  
your area and add them to the  
TVs memory.  
MTS  
100  
CH SEARCH  
A I R  
2
Note:  
I To interrupt CH SEARCH, press <. CH  
SEARCH will stop at the current  
channel and will not add any higher  
channels.  
MENU  
START :  
EX I T :  
5 Press MENU to exit.  
I Adding weak or additional channels or erasing unwanted channels from TV memory  
1 Press MENU to display the MENU  
CHSETT ING  
RETURN  
screen, press ]/[ to move the  
A I R/ CABLE  
cursor to SET UP, and press </ >  
to enter.  
CH SEARCH  
CH  
MEMORY  
POWER  
2 Press ]/[ to move the cursor to  
CH-SETTING, and press </ > to  
enter.  
DISPLAY  
SLEEP  
BRIGHT  
CH MEMORY  
MENU  
3 Press ]/[ to move the cursor to  
CH MEMORY, and press </ > to  
enter.  
A I R  
2
MUTE  
TV/VIDEO  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
4 Use ]/[ or Channel Select to  
select each desired channel to add  
or erase.  
1
4
2
5
8
0
3
6
MENU  
Channel  
Select  
TO ADD :  
EX I T :  
7
9
5 Press > to add the channel to the  
TV’s memory or press < to erase  
the channel from the TV’s memory.  
>
<
MTS  
100  
to add channel 2  
to the TV memory  
to erase channel 2  
to the TV memory  
6 Press MENU to exit.  
CH MEMORY  
A I R  
2
MENU  
TO ERASE :  
EX I T :  
Note:  
I If you press > again, auto-channel search program will start again, and the previously memorized channels will be  
lost.  
26  
LC-13B2U-GBpp19-42  
26  
01.3.27, 10:36 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the BLUE SCREEN Settings  
I BLUE SCREEN  
Automatically turns the screen blue if a broadcast signal is not received.  
1 Press MENU to display the MENU  
M
ENU  
SLEEP T IMER  
screen.  
V IDEO ADJUST  
PRESET  
2 Press ]/[ to move the cursor to  
POWER  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
SET UP.  
DISPLAY  
SLEEP  
BRIGHT  
3 Press </ > to enter.  
MENU  
MUTE  
TV/VIDEO  
MENU  
MENU  
MENU  
SELECT :  
ENTER :  
EX I T :  
EX I T :  
EX I T :  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
4 Press ]/[ to move the cursor  
SET UP  
RETURN  
to BLUE SCREEN.  
BLUE SCREEN [OFF ]  
LANGUAGE  
1
4
2
5
8
0
3
6
CHSETT I NG  
7
9
MTS  
100  
SELECT :  
ADJUST :  
5 Press </ > to select ON or OFF.  
SET UP  
RETURN  
BLUE SCREEN [ON  
LANGUAGE  
]
6 Press MENU to return to the main  
screen.  
CHSETT I NG  
SELECT :  
ADJUST :  
Notes:  
I When received signals are weak or interfered with by some other signals, the BLUE SCREEN function may be  
activated. To watch the TV under such conditions, set BLUE SCREEN to OFF.  
I When the AV-IN1, AV-IN2 or COMPONENT input mode is selected, if no signal is being input, the BLUE SCREEN  
function is activated.  
27  
LC-13B2U-GBpp19-42  
27  
01.3.27, 10:36 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the CLOSED CAPTION Settings  
I SETTING CLOSED CAPTION  
This TV set is equipped with an internal Closed Caption decoder. Closed Captionis  
a system which allows conversations, narration, and sound effects in TV programs  
and home videos to be viewed as captions on the TV screen (see the illustration).  
Not all the programs and videos will offer closed captioning. Please look for the “  
symbol to ensure that captions will be shown.  
The Closed Caption broadcasts can be viewed in two modes: [CAPTION] and  
[TEXT]. For each mode, two channels are available: CH1 and CH2.  
The [CAPTION] mode shows subscripts of dialogs and commentaries of TV dramas  
and news programs while allowing a clear view of the picture.  
The [TEXT] mode displays various information over the picture (such as TV program  
schedules and weather forecasts, etc.) that is independent of the TV programs.  
1 Press MENU to display the MENU  
M
ENU  
POWER  
SLEEP T IMER  
screen.  
V IDEO ADJUST  
PRESET  
DISPLAY  
2 Press ]/[ to move the cursor to  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
SLEEP  
BRIGHT  
CLOSED CAPTION.  
MENU  
3 Press </ > to enter.  
MUTE  
TV/VIDEO  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
MENU  
SELECT :  
ENTER :  
EX I T :  
1
4
2
5
8
0
3
6
4 Press ]/[ to move the cursor to  
CLOSED CAPT ION  
RETURN  
MODE or DATA.  
[OFF  
]
]
MODE  
7
9
DATA [ CH  
1
MTS  
100  
MENU  
SELECT :  
ADJUST :  
EX I T :  
5 Press </ > to change the CLOSED  
CLOSED CAPT ION  
RETURN  
CAPTION setting.  
[OFF  
]
]
MODE  
DATA [ CH  
1
6 Press MENU to return to the main  
screen.  
CLOSED CAPT ION  
RETURN  
CH 1  
CH 2  
CAPTION  
TEXT  
DATA:  
MODE:  
[ CAPT ION]  
MODE  
DATA [ CH  
2
]
OFF  
Notes:  
I If a broadcast has CLOSED CAPTION and MUTE is pressed, the set enters [CAPTION] mode automatically. Pressing  
MUTE again will return the set to its previous condition.  
I Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are  
problems at the broadcast source. This does not necessarily indicate a problem with your set.  
I If any button is pressed to call up the On-Screen Display while viewing a Closed Caption broadcast, the closed captions  
will disappear momentarily.  
I If no TEXT broadcast is being received while viewing in the [TEXT] mode, the screen may become dark and blank for  
some programs. Should this occur, switch the Closed Caption mode to OFF.  
28  
LC-13B2U-GBpp19-42  
28  
01.3.27, 10:36 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the V-CHIP Settings  
I V-CHIP  
This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents  
children from watching violent or sexual scenes that may be harmful.  
Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and  
the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age  
and content.  
Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete  
control.  
[1] MPAA RATING  
RATING  
G
GENERAL AUDIENCES. All ages admitted.  
PG  
PG-13  
R
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.  
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.  
RESTRICTED. Under 17 requires accompanying parent or adult guardian.  
NO ONE 17 AND UNDER ADMITTED.  
age  
base  
NC-17  
X
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.:  
MPAA RATING (examples)  
Example 1:  
PG-13 in the age-based rating is  
blocked, this will also automatically  
block the higher ratings R, NC-17  
and X.  
Example 2:  
R in the age-based rating is  
blocked, this will also automatically  
block the higher ratings NC-17 and  
X.  
ote:  
Note:  
I The MPAA rating is only age-based.  
29  
LC-13B2U-GBpp19-42  
29  
01.3.27, 10:36 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the V-CHIP Settings (Continued)  
[2] TV PARENTAL GUIDELINES  
content base  
FV  
(Fantasy  
Violence)  
V
S
L
D
RATING  
(Violence)  
(Sexual  
Situation)  
(Adult  
Language)  
(Sexually  
Suggestive  
Dialog)  
TV-Y (All children)  
TV-Y7 (Direct to Older Children)  
TV-G (General Audience)  
X
age  
TV-PG (Parental Guidance  
Suggested)  
base  
xxx  
TV-14 (Parents Strongly  
Cautioned)  
X
X
TV-MA (Mature Audience Only)  
: The content rating can be set, but this rating is not normally broadcast by TV stations.  
: The content rating can be set.  
TV PARENTAL GUIDELINES (examples)  
Example 1:  
When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block the higher ratings:TV-G, TV-PG, TV-14  
and TV-MA. In addition, D, L, S, V and FV in CONTENT are automatically blocked unless you manually set BLOCK  
CONTENT.  
Example 2:  
When no item in the age-based rating is blocked, D in the content-based rating will be automatically blocked.  
Notes:  
I Age-based ratings can be modified by the content-based ratings, but only in the combinations indicated by an X in  
the table above.  
I Choosing a lower age-based rating blocks the higher age-based ratings regardless of content rating settings.  
I If you set TV-Y and TV-Y7 to BLOCK, CONTENT will display all items.  
30  
LC-13B2U-GBpp19-42  
30  
01.3.27, 10:36 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the V-CHIP Settings (Continued)  
I SETTING V-CHIP  
[1] MPAA RATING  
1 Press MENU to display the MENU  
M
ENU  
SLEEP T IMER  
screen.  
POWER  
V IDEO ADJUST  
PRESET  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
DISPLAY  
SLEEP  
BRIGHT  
MENU  
MUTE  
TV/VIDEO  
2 Press ]/[ to move the cursor  
to V-CHIP BLOCK, and press  
</ > to enter.  
M
ENU  
MENU/  
]/[/  
</ >  
FLASHBACK  
SLEEP T IMER  
VOL  
CH  
V IDEO ADJUST  
PRESET  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
1
4
2
5
8
0
3
6
Channel  
Select  
7
9
MTS  
100  
3 INPUT SECRET NO. will be  
displayed. Input the 4-digit  
secret number by using the  
channel select keys.  
INPUT SECRET NO.  
MENU  
EX I T :  
4 Press </ > to move the cursor to  
VCH IP BLOCK  
RETURN  
MPAA, and press </ > to enter.  
MPAA  
TV GU IDEL I NES  
STATUS [OFF ]  
MENU  
SELECT :  
ENTER :  
EX I T :  
5 Press ]/[ to move the cursor to  
PG, and then press </ > to select  
BLOCK. If you set PG to BLOCK,  
PG-13, R, NC-17 and X are  
M
PAA  
RETURN  
G
[ –––– ]  
[ BLOCK ]  
PG  
PG13 [ BLOCK ]  
R
[ BLOCK ]  
automatically blocked.  
NC17 [ BLOCK ]  
X
[ BLOCK ]  
MENU  
SELECT :  
ADJUST :  
EX I T :  
6 Press MENU to return to the main  
screen.  
Notes:  
I If you set G to BLOCK, all ratings are automatically blocked.  
I If you set X to BLOCK, G, PG, PG-13, R and NC-17 are not blocked.  
31  
LC-13B2U-GBpp19-42  
31  
01.3.27, 10:36 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the V-CHIP Settings (Continued)  
[2] TV GUIDELINES  
I Setting MPAA  
1 Repeat steps 1 to 3 of [1] MPAA  
RATING.  
2 Press ]/[ to move the cursor to  
VCH IP BLOCK  
POWER  
RETURN  
TV GUIDELINES.  
MPAA  
TV GU IDEL I NES  
DISPLAY  
SLEEP  
BRIGHT  
STATUS [OFF ]  
MENU  
MUTE  
TV/VIDEO  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
MENU  
SELECT :  
ENTER :  
EX I T :  
3 Press </ > to enter.  
4 Press ]/[ to move the cursor to  
TV-Y7, and press </ > to select  
BLOCK. If you set TV-Y7 to  
BLOCK, TV-G, TV-PG, TV-14 and  
TV-MA are automatically blocked.  
In addition, D, L, S, V and FV in  
CONTENT are automatically  
blocked.  
1
4
2
5
8
0
3
6
TV GU IDEL I NES  
RETURN  
TVY [ –––– ]  
TVY7 [ BLOCK ]  
TVG [ BLOCK ]  
TVPG [ BLOCK ]  
TV14 [ BLOCK ]  
7
9
MTS  
100  
TV–  
M
A
[ BLOCK ]  
BLOCK CONTENT  
[D  
L
S
V
FV ]  
MENU  
SELECT :  
ADJUST :  
EX I T :  
5 Press MENU to return to the main  
screen.  
I Setting BLOCK CONTENT  
1 Press ]/[ to move the cursor to  
BLOCK CONTENT, and press </  
> to enter.  
TV GU IDEL I NES  
RETURN  
TVY [ –––– ]  
TVY7 [ –––– ]  
TVG [ –––– ]  
TVPG [ –––– ]  
TV14 [ –––– ]  
POWER  
DISPLAY  
SLEEP  
BRIGHT  
TV–  
MA  
[ –––– ]  
MENU  
BLOCK CONTENT  
[
]
MUTE  
TV/VIDEO  
MENU  
SELECT :  
ENTER :  
EX I T :  
MENU/  
]/[/  
</ >  
FLASHBACK  
VOL  
CH  
2 Press ]/[ to move the cursor to  
the desired item, and press </ >  
to select BLOCK or ----- (un-  
block).  
BLOCK CONTENT  
RETURN  
1
4
2
5
8
0
3
6
D
L
[ –––– ]  
[ BLOCK ]  
[ –––– ]  
[ –––– ]  
S
V
7
9
FV [ –––– ]  
MTS  
100  
MENU  
SELECT :  
ADJUST :  
EX I T :  
3 Press MENU to return to the main  
screen.  
Note:  
I If you set TV-14 to BLOCK, TV-MA is automatically blocked. contents D, L, S and V are automatically blocked by X in the  
table on page 30.  
32  
LC-13B2U-GBpp19-42  
32  
01.3.27, 10:36 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the V-CHIP Settings (Continued)  
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK  
1 Press MENU to display the MENU  
MENU  
SLEEP T IMER  
screen.  
V IDEO ADJUST  
PRESET  
POWER  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
DISPLAY  
SLEEP  
BRIGHT  
MENU  
2 Press ]/[ to move the cursor to  
V-CHIP BLOCK, and press </ >  
to enter.  
MUTE  
TV/VIDEO  
M
ENU  
SLEEP T IMER  
MENU/  
]/[/  
</ >  
FLASHBACK  
V IDEO ADJUST  
PRESET  
VOL  
CH  
CLOSED CAPT ION  
VCH I P BLOCK  
SET UP  
1
4
2
5
8
0
3
6
Channel  
Select  
7
9
MTS  
100  
3 INPUT SECRET NO. will be  
displayed. Input the 4-digit secret  
number by using the channel  
select keys. (The secret number is  
not displayed on the screen.)  
INPUT SECRET NO.  
0
1
2
3
MENU  
ENTER :  
4 Press MENU to register the secret  
number.  
[4] CANCELING THE V-CHIP BLOCK SCREEN WHILE V-CHIP BLOCK IS ACTIVATED  
1 V-CHIP HAS BEEN ACTIVATED  
POWER  
will be displayed if you watch the  
program with Program Rating data  
as same as you configured.  
DISPLAY  
VCH I P HAS BEEN ACT I VATED  
SLEEP  
BRIGHT  
TVY  
Note:  
MENU  
I V-CHIP HAS BEEN ACTIVATED will not be  
MUTE  
TV/VIDEO  
displayed if STATUS is not configured to ON.  
MENU  
FLASHBACK  
VOL  
CH  
2 Press MENU to display INPUT  
1
4
2
5
8
0
3
6
SECRET NO.  
Channel  
Select  
7
9
3 Input the 4-digit secret number by  
using the channel select keys; V-  
CHIP BLOCK is temporarily  
canceled. If you input an incorrect  
secret number, SECRET NO. IS  
INCORRECT is displayed. In this  
case, input the correct secret  
number.  
INPUT SECRET NO.  
MTS  
100  
MENU  
EX I T :  
Note:  
I If you turn the power on from off, V-CHIP BLOCK will be activated again.  
If you select V-CHIP BLOCK again by using MENU, V-CHIP BLOCK will be turned on again.  
33  
LC-13B2U-GBpp19-42  
33  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the V-CHIP Settings (Continued)  
[5]CHANGING THE V-CHIP BLOCK SETTINGS  
1 Repeat steps 1 to 3 of [1] MPAA  
POWER  
RATING, then INPUT SECRET  
NO. will be displayed.  
DISPLAY  
INPUT SECRET NO.  
SLEEP  
BRIGHT  
MENU  
MUTE  
TV/VIDEO  
FLASHBACK  
VOL  
CH  
MENU  
EX I T :  
2 Input the 4-digit secret number by  
using the channel select keys; the  
V-CHIP select mode will be  
displayed. Set V-CHIP BLOCK  
again.  
1
4
2
5
8
0
3
6
Channel  
Select  
7
9
INPUT SECRET NO.  
MTS  
100  
* * * *  
MENU  
EX I T :  
[6]CHANGING OR CLEARING THE SECRET NUMBER  
If you forget the secret number, clear the secret number as follows.  
1 Repeat steps 1 to 3 of [1] MPAA  
Upper control panel  
of the main unit  
RATING, or 1 to 2 of [4]  
CANCELING THE V-CHIP  
BLOCK SCREEN WHILE V-CHIP  
BLOCK IS ACTIVATED, then  
INPUT SECRET NO. will be  
displayed.  
VOL  
CH  
MENU  
CH (  
)
2 Press and hold both CH ( ) and  
VOL (+) on the TV set simultane-  
ously until the message INPUT  
SECRET NO. blinks.  
VOL (+)  
MENU  
3 Press MENU to exit.  
34  
LC-13B2U-GBpp19-42  
34  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING WITH EXTERNAL DEVICES  
You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals  
located on the rear of the TV set.  
When connecting an external device, turn off the power of the main unit first to prevent any possible  
damage.  
Example of external devices  
that can be connected  
Video camera  
Home video game system  
VCR  
Laser disc player  
To AV-IN1 or 2 terminal  
* PC connection is not  
possible.  
* If your external device  
has an S-Video terminal,  
S-VIDEO connection is  
recommended.  
DVD, etc.  
To COMPONENT terminal  
* If your external device has a  
component terminal, COMPO-  
NENT connection is recommended  
(you can view high-quality  
pictures). If your external device  
does not have a component  
terminal, S-VIDEO connection is  
recommended.  
Notes:  
I For the cable, use a commercially available audio/video cord.  
I Only connect audio/video signals to AV-IN1 and 2 terminals. Connecting other signals may result in a malfunc-  
tion.  
I AV-IN1 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals  
(and if you select AV-IN1), you can only view pictures from the S-VIDEO terminal. To view the picture from the  
VIDEO terminal, do not connect any external device to the S-VIDEO terminal.  
I For more information about external device connections, see the manuals of your external devices.  
35  
LC-13B2U-GBpp19-42  
35  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING WITH EXTERNAL DEVICES (Continued)  
Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT)  
To AV-IN2 terminal  
ANT.  
AV-IN2/OUT  
Video  
VIDEO  
L
Audio (L)  
AUDIO  
R
Audio (R)  
COMPONENT  
Y
B
P
To audio/video  
output terminal  
R
P
VCR  
L
AUDIO  
R
To component  
H E A D  
PHONE  
input (Video)  
POWER  
INPUT  
terminal  
DC12V  
Y
PB  
PR  
Audio (L)  
Audio (R)  
To component  
input (Audio)  
terminal  
/
DVD Player  
To AV-IN1 terminal  
AV-IN1  
VIDEO  
L
AUDIO  
Video  
R
S-VIDEO  
Audio (L)  
Audio (R)  
Video camera  
To audio/video  
output terminal  
Notes:  
I If your VCR (or other external devices) has an S-Video terminal, S-VIDEO connection is recommended. (Use an  
S-video cord.)  
I When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select AV-IN1), you can  
only view pictures from the S-VIDEO terminal.  
I You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting  
an external device, use care to connect the video and audio cables to the corresponding terminals.  
I Do not connect antennas or headphones to AV-IN2.  
36  
LC-13B2U-GBpp19-42  
36  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING WITH EXTERNAL DEVICES (Continued)  
Outputting video and audio (video output)  
You can output video and audio data from the TV set through the AV output terminals (AV-OUT).  
ANT.  
AV-IN2/OUT  
VIDEO  
Connect a VCR,  
L
Audio amplifier,  
etc.  
AUDIO  
R
COMPONENT  
Y
B
P
R
P
L
AUDIO  
R
H E A D  
PHONE  
POWER  
INPUT  
DC12V  
Notes:  
I AV2 has 2 OUT modes (see page 24).  
I When using the S-Video input for AV-IN1, no video output will be made to the AV output terminal, but audio  
output will be made for connection to external audio systems.  
Note:  
How to fix the cables  
Fix cables and cords with the attached cable clamps  
so that they do not get caught when mounting the  
cover.  
Connect the cables and cords after fixing the cable  
clamps (2 positions).  
Cable clamps  
37  
LC-13B2U-GBpp19-42  
37  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
I Before calling for repair service, check the following items for possible remedies to  
the encountered symptoms.  
TV set  
Reference  
Pages  
Problem  
Check item  
9
Make sure the AC adapter is properly inserted in the  
power outlet.  
Picture  
Sound  
Reception other than those of broadcasting stations  
can be considered.  
Make sure the input mode is set to TV.  
Make sure the main power switch of the main unit is  
on.  
There is no  
picture or  
sound.  
15  
15  
22, 23  
Make sure the BLACK LEVEL is properly adjusted.  
Fluorescent lamp may have reached the end of  
service life.  
There is no  
picture.  
There is no  
picture from  
AV-IN 1.  
Picture  
36  
Make sure the S-Video terminal is free of connections.  
16  
16  
13  
Make sure the volume is not set to minimum.  
Make sure the sound is not set to mute.  
Make sure that headphones are not connected.  
There is no  
sound.  
9
Make sure the antenna cable is properly connected.  
Consider whether TV signals are being properly  
received.  
There is no  
picture or  
sound, just  
noise.  
9
Make sure the antenna cable is properly connected.  
Consider whether TV signals are being properly  
received.  
Picture is not  
clear.  
Check color adjustment.  
22, 23  
Check color system setting.  
Picture is light  
or improperly  
tinted.  
Press the Brightness button.  
Check PICTURE and BLACK LEVEL adjustment.  
Fluorescent lamp may have reached the end of  
service life.  
22, 23  
40  
The picture is  
too dark.  
8
8
Check the batteries of the remote controller.  
Make sure the remote sensor window is not under  
strong fluorescent lighting.  
Remote control does not work.  
38  
LC-13B2U-GBpp19-42  
38  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING (Continued)  
Antenna  
Problem  
Check item  
The reception may be weak.  
The state of the broadcast may also be bad.  
Make sure the antenna is facing the right direction.  
Make sure the outside antenna is not disconnected.  
The picture is  
not sharp.  
The picture  
moves.  
Make sure the antenna is facing the right direction.  
There may be reflected electric waves from mountains or  
buildings.  
The picture is  
doubled or  
tripled.  
There may be interference from automobiles, trains, high  
voltage lines, neon lights, etc.  
There may be interference between the antenna cable and  
power cable. Try positioning them further apart.  
The picture is  
spotted.  
Is the unit receiving interference from other devices?  
Transmission antennas of radio broadcasting stations and  
transmission antennas of amateur radios and cellular phones  
may also cause interference.  
Use the unit as far apart as possible from devices that may  
cause possible interference.  
There are  
stripes on the  
screen or  
colors fade.  
39  
LC-13B2U-GBpp19-42  
39  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Items  
LC-13B2U  
Model  
LCD panel  
13TFT LCD  
Number of pixels  
Video color systems  
Destination  
921,600 pixels VGA  
N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60  
USA/Latin A/Twn  
TV Standard (CCIR)  
NTSC/PAL-M/PAL-N  
PLL 181 ch.  
TV function  
TV Tuning System  
STEREO  
MTS+SAP  
CATV  
125 ch.  
4-LINE COMB FILTER  
Brightness  
Lamp life  
Yes  
430 cd/m2  
60,000 hours  
Viewing angles  
Audio amplifier  
Speakers  
H: 160° V: 160°  
2.1 W × 2  
1-37/64 × 2-3/4 in. (4 × 7 cm), 2 pcs.  
AV-IN1, S-VIDEO-IN  
AV-IN2/AV-OUT  
AV1  
AV2  
COMPONENT  
COMPONENT-IN, AUDIO-IN  
F-Type  
Terminals  
Antenna  
Headphone  
Mini-jack for stereo (3.5 ø)  
English/French/Spanish  
DC 12 V, AC 110240 V, 50/60 Hz  
8.4 lbs (3.8 kg), w/o accessories  
OSD language  
Power supply  
Weight  
Accessories  
Remote control, Batteries, Antenna cable, AC adapter,  
AC cord, Cable clamps  
I
Design and specifications are subject to change without notice.  
40  
LC-13B2U-GBpp19-42  
40  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIMENSIONAL DRAWINGS  
Unit: inch/mm  
16.9/429  
10.4/265  
10.6/270  
3.7/92.7  
2.2/55  
ANT.  
AV-IN1  
VIDEO  
AV-IN2/OUT  
VIDEO  
L
AUDIO  
R
L
AUDIO  
S-VIDEO  
R
COMPONENT  
Y
P
B
R
P
L
AUDIO  
R
H
E
A
D
PHONE  
POWER  
INPUT  
DC12V  
2.2/55.3  
7.0/177.8  
41  
LC-13B2U-GBpp19-42  
41  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Calling for Service  
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer  
assistance, please call 1-800-BE-SHARP.  
LIMITED WARRANTY  
END-USER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first end user purchaser that this Sharp brand product (the  
Product), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it  
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured  
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below  
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or  
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide  
proof of purchase to the servicer.  
To the extent permitted by applicable state law, the warranties set forth herein are in lieu of, and exclusive of, all other  
warranties, express or implied. Specifically, ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE  
EXCLUDED. ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. If, under  
applicable state law, implied warranties may not validly be disclaimed or excluded, the duration of such implied warranties is  
limited to the period(s) from the date of purchase set forth below.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those  
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and  
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described  
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the  
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.  
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused  
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any  
way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on  
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.  
Model Specific Section  
Your Product Model Number & Description:  
LC-13B2U LCD Color Television  
(Be sure to have this information available when you need service for  
your Product.)  
Warranty Period for this Product:  
One (1) year parts and labor from the date of purchase.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
None  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the United States.  
To find the location of the nearest Sharp Authorized Servicer, call  
Sharp toll free at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.  
Be sure to have Proof of Purchase available. If you ship the Product,  
be sure it is insured and packaged securely.  
TO OBTAIN PRODUCT INFORMATION, CALL 1-888-LCD-SHARP.  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
42  
LC-13B2U-GBpp19-42  
42  
01.3.27, 10:37 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shure Microphone ksm44 User Manual
Sigma Video Games F17S07701 User Manual
Soleus Air Air Conditioner KFHHP 22 ID User Manual
Spirit CD Player PLAYER User Manual
StarTechcom Computer Hardware PCIVGA7 User Manual
Star Trac Cyclometer Bike Computer User Manual
Sub Zero Refrigerator BI 36F User Manual
Sylvania CRT Television TVK139V User Manual
Sylvania VCR 6260VE User Manual
Symphonic CRT Television ST413C ST419C User Manual