Connect the handset.
1. Open the cover (➊) and
2. Close the print
compartment cover.
(Do not install the print
cartridge yet.)
2
1
3
remove the tape (➋).
Inkjet Fax
2
QUICK SETUP GUIDE
1
IMPORTANT!!
Should you require any assistance
setting up or operating your product,
please
DO NOT RETURN YOUR PRODUCT
TO THE STORE.
Attach the trays.
Attach the document
exit tray and flip out
the extension
After referring to the setup guide and operation
manual, if you still require assistance please
From our web page you will be able to directly e-
mail our customer support team.
Attach the
paper tray
If you would like personal assistance, please call
our Customer Assistance Center at 1-877-794-
8675.
Attach the received
document tray
Pull the received document tray
extension all the way out
1. Connect the phone line cord
to the TEL. LINE jack and a
wall jack.
2. Plug the power cord into a
120 V grounded outlet.
Load paper.
4
5
The stack should not
be higher than this line
Fan the paper, and tap the
edges against a flat surface
to even the stack.
Pull the paper
plate forward and
insert the paper
print side up.
Note: If you are loading legal paper, see pages 45
and 48 of the manual to change the paper size
setting to LEGAL (first install the print cartridge).
Install the Print Cartridge.
6
4. Insert the new print cartridge (➊).
Close the holder (➋), making
sure it clicks into place.
3. Make sure the cartridge holder is in
the position shown. Place your
fingers on top of the holder and open
the holder release.
1. Open the operation
panel.
2. Remove only the tape from the new cartridge.
IMPORTANT: Make sure all tape is removed.
Caution! Do not touch
the gold contact area.
2
1
7. In the alignment page,
locate the line that is
closest to a completely
straight line. Enter the
number of that line.
6. a. Press
b. Press
to select NEW.
.
5. Close the cover, pressing
firmly on both front corners.
8. Press
.
Note: To enter your
name and fax number
and set the date and
time so that they
appear at the top of
each fax page you
send, see pages 11 -
12 of the manual.
The machine will print an alignment
page.
Example:
(To clear a mistake,
press
.)
In this example, “15” is
closest to a straight line
CHANGE CARTRIDGE
1=NEW, 2=OLD
Display:
Setup for Fax to E-mail
7
See page 17 of the manual
to configure the E-mail
settings (“SENDER
ADDRESS” and “SMTP
SERVER” must be
The machine requires an IP
address to communicate.
Most networks assign an IP
address automatically when
a device is connected.
Connect one end of an
Ethernet cable (not included)*
to the LAN port on the machine,
and the other end to a LAN port
on your router, switch, or hub.
To use Fax to E-mail you must:
1. Have an Internet connection
2. Have a router, hub, or switch
through which the machine
can be connected to the
Internet.
configured to use Fax to E-
mail).
If your network requires that
a permanent IP address be
assigned to the machine,
see page 23 of the manual.
*Please purchase a 10Base-T/
100Base-TX straight-through
(regular) Ethernet cable.
(TCADH3894XHZZ)
Download from Www.Somanuals.com. All Manuals Search And Download.
|