Sharp DVD VCR Combo 20F630 L User Manual

COLOR TELEVISION  
MODEL  
20F630  
L OPERATION MANUAL L  
As an ENERGY STAR ® Partner, SHARP has determined that this product meets  
the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a  
U.S. registered trademark.  
CONTENTS  
PAGE  
Closed Caption ...................................................... 24  
Parental Control ............................................. 25 ~ 35  
V-CHIP ........................................................ 25 ~ 32  
View Timer .................................................. 33 ~ 35  
Ch Setup ........................................................ 36 ~ 41  
EZ Setup ............................................................. 36  
Channel Setting .......................................... 37 ~ 39  
Personal Preference ........................................... 40  
Universal Plus Function ...................................... 41  
Set Up ............................................................ 42 ~ 43  
Energy Save ....................................................... 42  
Blue Screen ........................................................ 43  
Using the Video and Audio Input Jacks ......... 44 ~ 45  
Using the Audio Output Jacks ............................... 46  
Operation of Remote Control ......................... 47 ~ 51  
Before Calling for Service .............................. 52 ~ 53  
Calling for Service ......................................... 52 ~ 53  
Specifications ........................................................ 54  
Limited Warranty .................................................... 56  
PAGE  
IMPORTANT INFORMATION/IMPORTANT  
SAFEGUARDS ................................................ 2 ~ 10  
Supplied Accessories ............................................ 11  
Before Operating Your Television ........................... 11  
Antenna Connections .................................... 11 ~ 12  
Quick Reference Control Operation ............... 13 ~ 15  
EZ SETUP during First Use................................... 16  
Demo Mode ........................................................... 17  
Accessing the MAIN MENU screen without  
Remote Control...................................................... 17  
Language ............................................................... 18  
Sleep Timer ........................................................... 19  
Video Adjust .......................................................... 20  
Audio Adjust........................................................... 21  
Audio Select................................................... 22 ~ 23  
MTS (Multichannel TV Sound) ............................ 22  
INTERNAL SPEAKER SWITCH ......................... 22  
FAO (Fixed Audio Output) ................................... 22  
This operating manual includes basic operating  
instructions in Spanish and French.  
SPANISH is on page 5 ~ 7, 14, 53.  
FRENCH is on page 8 ~ 10, 15, 54.  
A725 WJ  
20F630[01-05].p65  
1
25/3/03, 2:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION (Continued)  
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not  
expressly approved by the manufacturer could void the user’s authority to operate this  
equipment.  
PRODUCT DISPOSAL  
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder.  
Disposal of these materials may be regulated due to environment considerations. For disposal or  
recycling information, please contact your local authorities or the Electronics Industries  
CAUTION: Do not place the AC power cord under the TV set or other heavy items.  
IMPORTANT SAFEGUARDS  
CAUTION:  
Please read all of these instructions before you operate your television and save  
these instructions for later use.  
Electrical energy can perform many useful functions.This unit has been engineered and manufactured to assure  
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE  
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic  
rules for its installation, use and servicing.  
1. Unplug this television equipment from the wall outlet before cleaning.  
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause hazards.  
4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or  
laundry tub, in a wet basement, or near a swimming pool, etc.  
5. Do not place this equipment on an unstable cart, stand, or table.The television equipment may fall, causing  
serious injury to a child or an adult, and serious damage to the equipment.  
Use only with a cart or stand recommended by the manufacturer or sold with the television  
equipment.  
Television equipment and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the equipment and cart combination to  
overturn.  
6. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a  
mounting kit approved by the manufacturer.  
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure reliable  
operation of the television equipment and to protect it from overheating, these openings must not be blocked  
or covered. This television equipment should not be placed in a built-in insulation such as a bookcase  
unless proper ventilation is provided.  
8. The openings should never be covered with a cloth or other material, and the bottom openings should not  
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television  
equipment should never be placed near or over a radiator or heat register.  
9. This television equipment should be operated only from the type of power source indicated on the marking  
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local  
power company.  
For television equipment designed to operate from battery power, refer to the operating instructions.  
If the plug does not fit, ask your electrician to replace your obsolete outlet.Do not modify the plug and defeat  
this safety feature.  
10. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will  
be abused by persons walking on it.  
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger  
than the other). The 2-wire polarized plug will fit only one way into the power outlet.  
If the plug does not fit, ask your electrician to replace your obsolete outlet.Do not modify the plug and defeat  
this safety feature.  
3
20F630[01-05].p65  
3
25/3/03, 2:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
IMPORTANT INFORMATION (Continued)  
12. Follow all warnings and instructions marked on the television equipment.  
13. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded  
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the  
National Electrical Code provides information with respect to proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location  
of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING  
ACCORDING TO NATIONAL ELECTRICAL CODE.  
ANTENNA LEAD-IN WIRE  
GROUND CLAMP  
ANTENNA DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
SERVICE  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM  
(NEC PART 250, PART H)  
NEC - NATIONAL ELECTRICAL CODE  
14. For added protection for this television equipment during a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.This will prevent  
damage to the equipment due to lightning and power-line surges.  
15. An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact  
with them might be fatal.  
16. Do not overload wall outlets and extension cords as this can result in fire or electric shock.  
17. Never push objects of any kind into this television equipment through cabinet slots as they may touch  
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of  
any kind on the television equipment.  
18. Do not attempt to service this television equipment yourself as opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.  
19. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
A. When the power cord or plug is damaged or frayed.  
B. If liquid has been spilled into the television equipment.  
C. If the television equipment has been exposed to rain or water.  
D. If the television equipment does not operate normally by following the operating instructions. Adjust only  
those controls that are covered by the operating instructions as improper adjustment of other controls  
may result in damage and will often require extensive work by a qualified technician to restore the  
television equipment to normal operation.  
E. If the television equipment has been dropped or the cabinet has been damaged.  
F. When the television equipment exhibits a distinct change in performance — this indicates a need for  
service.  
20. Upon completion of any service or repairs to this television equipment, ask the service technician to  
perform routine safety checks to determine that the television is in safe operating condition.  
21. When replacement parts are required, be sure the service technician has used replacement parts  
specified by the manufacturer that have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other hazards.  
4
20F630[01-05].p65  
4
25/3/03, 2:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
(ESPAÑOL)  
Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro.  
IMPORTANTE  
N° de modelo :  
Sírvase anotar el modelo del televisor y los números de serie  
en el espacio provisto, para ayudar a reportar en caso de pérdida  
o robo. Los números están ubicados en la parte posterior del  
televisor.  
N° de serie :  
INFORMACIÓN IMPORTANTE  
Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor  
SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.  
PRIMERA GARANTÍA  
Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en cuanto a piezas,  
servicio técnico y mano de obra aplicable a su adquisición.  
SEGUNDA ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR  
Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre  
inspección, modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de  
productos de consumidor de 1972. LEA CUIDADOSAMENTE LA CLÁUSULA GARANTÍA LIMITADA”  
DE LA ÚLTIMA PÁGINA.  
®
¿QUÉ ES ENERGY STAR  
?
Los televisores y las videograbadoras utilizan energía cuando están encendidos ó apagados. Los  
norteamericanos gastan más de 1 billón de dólares al año en la energía que consumen televisores y  
®
videograbadoras cuando no se encuentran en uso. Los nuevos modelos ENERGY STAR reducen esa  
fugade energía hasta en un 75 por ciento. Esto implica más de 500 millones de dólares al año en  
ahorro de energía para los consumidores.  
El ahorro de energía ayuda a reducir el consumo de combustibles fósiles y por tanto la contaminación  
por dióxido de carbono que contribuye al calentamiento global.Si cada familia norteamericana sustituyera  
®
sus televisores y videograbadoras por modelos ENERGY STAR , se reducirían las emisiones de dióxido  
de carbono en cinco millones de toneladas cada año (equivalente a eliminar la contaminación procedente  
de más de un millón de automóviles).  
El uso de productos ENERGY STAR permite reducir el monto de las facturas de energía eléctrica y  
®
consumir menos energía. De este modo ahorrará dinero y ayudará a proteger el medio ambiente.  
PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA  
ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD.  
ADVERTENCIA:  
El relámpago con cabeza de  
flecha dentro de un triángulo  
trata de indicar al usuario que las  
partes dentro del producto  
representan  
electrochoque  
personas.  
riesgo  
para  
de  
las  
PRECAUCIÓN : PARA REDUCIR EL RIESGO DE  
DESCARGAS ELÉCTRICAS, NO RETIRE LA  
CUBIERTA (NI EL PANEL POSTERIOR).  
NO CONTIENE PIEZAS REPARABLES POR EL  
USUARIO.  
SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE  
SERVICIO TÉCNICO ESPECIALIZADO.  
El signo de exclamación dentro  
de un triángulo trata de indicar  
al usuario que las instrucciones  
importantes de operación y  
servicio se encuentran en los  
documentos con el aparato.  
Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención  
del instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene  
las directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe  
estar conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.”  
5
20F630[01-05].p65  
5
25/3/03, 2:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
INFORMACIÓN IMPORTANTE (Continuación)  
ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada  
que se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la  
autoridad del usuario para utilizar este equipo.  
DESECHO DEL PRODUCTO  
Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo.  
El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener  
información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con  
PRECAUCIÓN: No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado.  
MEDIDAS DE SEGURIDAD IMPORTANTES  
PRECAUCIÓN:  
Lea por favor todas estas instrucciones antes de poner en funcionamiento  
su televisor, y guárdelas para poder utilizarlas en el futuro.  
La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para  
garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE  
DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar  
problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.  
1. Desenchufe el televisor del tomacorriente antes de limpiarlo.  
2. No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.  
3. No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.  
4. No utilice el televisor cerca del agua – por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en  
un sótano húmedo, cerca de una piscina, etc.  
5. No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse  
causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía.  
Ponga el televisor solamente sobre un carrito o soporte recomendado por el fabricante, o  
vendido junto con el televisor.  
La combinación de carrito y televisor debe moverse con mucho cuidado.Las paradas rápidas,  
la fuerza excesiva y las superficies irregulares pueden ser la causa de que la combinación  
de televisor y carrito se volteen.  
6. Cuando instale el televisor en una pared o en una estantería siga las instrucciones del fabricante, y utilice  
el kit de montaje aprobado por el fabricante.  
7. Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para  
que éste funcione bien y para evitar que se caliente.Estas aberturas no deben taparse nunca. Este televisor  
no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación  
apropiada.  
8. Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no  
deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar.  
Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.  
9. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no  
está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien  
adquirió el televisor o con la compañía eléctrica local.  
En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de uso.  
Si el enchufe no entra en el tomacorriente, pídale a un electrícista que le coloque un tomacorriente nuevo.  
No modifique el enchufe porque anulará esta característica de seguridad.  
10. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable  
pueda ser deformado por personas que caminen sobre él.  
11. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos.  
El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.  
Si el enchufe no entra en el tomacorriente, pídale a un electrícista que le coloque un tomacorriente nuevo.  
No modifique el enchufe porque anulará esta característica de seguridad.  
6
20F630[06-10].p65  
6
25/3/03, 2:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
MEDIDAS DE SEGURIDAD IMPORTANTES (Continuación)  
12. Cumpla con todos los avisos y las instrucciones marcados en el televisor.  
13. Si hay una antena exterior conectada al televisor, asegúrese de que el sistema de antena está conectado  
a tierra, para obtener así cierta protección contra la sobretensión y contra las cargas de electricidad estática  
acumulada.  
EJEMPLO DE CONEXIÓN A TIERRA DE UNA  
ANTENA SEGÚN CÓDIGO ELÉCTRICO NACIONAL.  
BAJADA DE ANTENA  
ABRAZADERA PARA PUESTA A TIERRA  
UNIDAD DE DESCARGA DE ANTENA  
(SECCIÓN 810-20 DEL NEC)  
EQUIPO DE  
CONDUCTORES DE PUESTA A TIERRA  
SERVICIO  
(SECCIÓN 810-20 DEL NEC)  
ELÉTRICO  
ABRAZADERAS PARA PUESTA A TIERRA  
SISTEMA DE ELECTRODOS DE PUESTA A TIERRA DEL SERVICIO  
ELÉCTRICO (PARTE 250. PARTE H DEL NEC)  
NEC - NATIONAL ELECTRICAL CODE (CÓDIGO ELÉCTRICO NACIONAL)  
14. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin  
utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y  
desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la  
sobretensión en la línea de alimentación.  
15. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de  
luces eléctricas o circuitos de alimentación.Tampoco debe ubicarse donde pueda caer sobre tales líneas o  
circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado para no  
tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal.  
16. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o  
descarga eléctrica.  
17. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o  
causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca  
ningún tipo de líquido sobre el televisor.  
18. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una  
descarga de tensión u otros peligros.Las reparaciones debe realizarlas el personal de servicio CALIFICADO.  
19. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se produzcan  
las condiciones siguientes:  
A. Cuando el cable de la alimentación o el enchufe estén estropeados.  
B. Cuando haya derramado un líquido sobre el televisor.  
C. Si el televisor ha quedado expuesto a la lluvia o al agua.  
D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente los  
controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles podría  
estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que éste lo  
repare y lo devuelva a su condición normal.  
E. Si el televisor se ha caído o la caja se ha estropeado.  
F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio de  
reparaciones.  
20. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice  
comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún  
problema.  
21. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de CAMBIO  
especificadas por el fabricante, aquellas que tengan las mismas características que las piezas originales.  
Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u otros peligros.  
7
20F630[06-10].p65  
7
25/3/03, 2:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
(FRANÇAIS)  
Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.  
IMPORTANT  
N° du modèle :  
Afin de vous aider en cas de perte ou de vol, inscrivez les  
numéros de série et de modèle du téléviseur dans les espaces  
fournis à cet effet. Ces numéros sont situés à larrière du  
téléviseur.  
N° de série :  
INFORMATIONS IMPORTANTES  
Deux raisons importantes denregistrer rapidement la garantie de votre nouveau téléviseur SHARP à  
laide de la carte denregistrement (REGISTRATION CARD) incluse dans le colis :  
LA PREMIERE LA GARANTIE  
Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du  
service et des travaux applicable à votre achat.  
LA DEUXIEME LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION  
(CONSUMER PRODUCT SAFETY ACT)  
Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du  
rappel de votre produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la  
sécurité du produit de consommation. LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE  
LIMITEE» DE LA DERNIÈRE PAGE.  
®
ENERGY STAR : QUEST-CE QUECEST  
Les téléviseurs et les magnétoscopes utilisent de l’énergie lorsquils sont allumés et éteints.Les Américains  
dépensent plus d1 milliard de dollars par an en énergie consommée par les téléviseurs et les  
®
magnétoscopes une fois éteints. Les nouveaux modèles ENERGY STAR réduisent jusqu’à 75 % ce  
gaspillage d’énergie. Ce qui représente finalement plus de 500 millions de dollars par an d’économie  
d’énergie pour les consommateurs.  
Ces économies aident à réduire la combustion des énergies fossiles et la pollution au gaz carbonique  
associée, qui contribue au réchauffement de la planète. Si toutes les familles américaines remplaçaient  
®
leurs téléviseurs et leurs magnétoscopes par des modèles ENERGY STAR , les émissions de gaz  
carbonique seraient réduites de cinq millions de tonnes par an ce qui reviendrait à éliminer la pollution  
émise par plus dun million de voitures.  
®
En utilisant les produits ENERGY STAR , vous économiserez également de largent sur vos factures  
d’électricité et vous utiliserez moins d’énergie. Un peu de bon sens économique au profit de notre  
environnement !  
POUR REDUIRE LE RISQUE DINCENDIE OU DELECTROCUTION,  
NEXPOSEZ PAS CET EQUIPEMENT A DES ENDROITSTRES HUMIDES.  
AVERTISSEMENT:  
Le symbole de la foudre sous  
forme de flèche dans un triangle  
est supposé indiquer  
à
lutilisateur que les pièces  
internes au produit constituent  
un risque d’électrocution.  
ATTENTION : POUR REDUIRE LE RISQUE  
DELECTROCUTION,  
NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).  
LAPPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR  
PAR LUTILISATEUR.  
Le symbole du point dexclamation  
dans un triangle est supposé  
indiquer à lutilisateur que des  
instructions de fonctionnement et  
de maintenance importantes se  
trouvent dans la documentation  
fournie avec l’équipement.  
CONSULTEZ UN PERSONNEL QUALIFIE POUR  
LA MAINTENANCE.  
Note à lintention de linstallateur du système CATV : Ce rappel est fourni afin dattirer lattention de  
linstallateur de système CATV sur larticle 820-40 du National Electrical Code qui indique les règles  
de mise à la terre appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au  
réseau commun de mise à la terre du bâtiment, au point le plus proche possible de la source.”  
8
20F630[06-10].p65  
8
25/3/03, 2:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
INFORMATIONS IMPORTANTES(Suite)  
AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non  
autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir  
de lutilisateur sur le fonctionnement de cet équipement.  
MISE AU REBUT DU PRODUIT  
Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre.  
La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour  
toute information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions  
importantes préconisées par la société Electronics Industries Alliance sur : www.eiae.org.  
ATTENTION: Ne placez pas le cordon dalimentation sous le téléviseur ou sous tout autre objet lourd.  
PRÉCAUTIONS IMPORTANTES  
ATTENTION:Veuillez lire toutes ces instructions avant dutiliser votre télévision et conservez-  
les pour un usage ultérieur.  
L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de façon  
à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER DES  
RISQUES DELECTROCUTION OU DINCENDIE.Afin de ne pas détruire les protections intégrées à cet appareil,  
respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance.  
1. Débranchez la télévision avant de la nettoyer.  
2. Nutilisez pas de nettoyants liquides ou daérosols et utilisez un chiffon humide.  
3. Nutilisez pas daccessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques.  
4. Nutilisez pas cette télévision à proximité deau par exemple, près dune baignoire, dun lavabo, dun  
évier ou dun bac à laver, dans une cave humide ou près dune piscine, etc.  
5. Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber et  
provoquer de graves lésions à toute personne et causer de sérieux dommages à  
l’équipement.  
Utilisez uniquement un support ou un chariot recommandé par le fabricant ou vendu avec  
la télévision.  
Lensemble télévision-chariot doit être déplacé délicatement.Les arrêts brusques, une force  
excessive et des surfaces inégales peuvent renverser lensemble.  
6. Linstallation au mur ou sur une tablette doit être réalisée conformément aux instructions du fabricant et à  
laide dun kit de montage approuvé par ce dernier.  
7. Les fentes et les ouvertures du châssis à larrière ou dans la partie inférieure sont prévus pour la ventilation.  
Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces ouvertures  
ne doivent être ni obturées, ni recouvertes.La télévision ne doit pas être placée dans un endroit encastré tel  
quune bibliothèque, sauf si une ventilation adéquate est prévue.  
8. Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure ne  
doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface similaire.  
Cette télévision ne doit être placée ni à proximité dun radiateur ou dun registre de chaleur, ni dessus.  
9. Cette télévision doit être alimentée uniquement par le type dalimentation électrique indiqué sur l’étiquette.  
Si vous n’êtes pas sûr du type dalimentation de votre domicile, consultez votre revendeur de télévision ou  
la compagnie d’électricité locale (EDF en France).  
Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode demploi.  
Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être  
obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.  
10. Ne posez rien sur le cordon dalimentation. Ne placez pas la télévision dans un emplacement où le cordon  
dalimentation est susceptible d’être endommagé par le passage répété de personnes.  
11. Du point de vue de la sécurité, la télévision est équipée dune fiche polarisée à 2 fils (une lame plus importante  
que lautre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul sens.  
Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être  
obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.  
9
20F630[06-10].p65  
9
25/3/03, 2:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
PRÉCAUTIONS IMPORTANTES (Suite)  
12. Respectez tous les avertissements et instructions mentionnés sur la télévision.  
13. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système dantenne soit relié à la  
terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques  
accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la  
terre correcte de la potence et de la structure portante, à une mise à la terre du fil dentrée à une unité de  
décharge dantenne, aux dimensions des conducteurs de terre, à lemplacement de lunité de décharge  
dantenne, au raccordement des prises de terre ainsi qu’à leurs exigences.  
EXEMPLE DE MISE A LA TERRE DANTENNE  
CONFORME AU NATIONAL ELECTRICAL CODE.  
FIL DENTREE DANTENNE  
COLLIER DE MISE A LA TERRE  
UNITE DE DECHARGE DANTENNE  
(NEC SECTION 810-20)  
EQUIPEMENT  
CONDUCTEURS DE TERRE  
(NEC SECTION 810-21)  
DE SERVICE  
ELECTRIQUE  
COLLIERS DE MISE A LA TERRE  
ALIMENTATION DU SYSTEME DE PRISE DE TERRE  
(NEC PARAGRAPHE 250. PARARAGRAPHE H)  
NEC - NATIONAL ELECTRICAL CODE  
14. Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée  
pendant de longues périodes, débranchez-la et déconnectez lantenne.Vous éviterez ainsi des dommages  
à votre équipement suite à la foudre et des poussées de tension.  
15. Un système dantenne extérieure ne doit pas être situé à proximité de lignes aériennes ou dautres groupes  
électrogènes ou circuits électriques ou dans des emplacements où lantenne pourrait tomber sur ce type de  
lignes ou circuits. Lors de linstallation dun système dantenne extérieure, faites extrêmement attention à  
ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal.  
16. Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque dincendie ou  
d’électrocution.  
17. Nintroduisez jamais dobjets à travers les fentes du châssis, car ils pourraient entrer en contact avec des  
points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une  
électrocution. Ne répandez jamais de liquides sur la télévision.  
18. Nessayez pas de réparer vous-même votre télévision.Louverture ou le retrait des capots peut vous exposer  
à une tension dangereuse ou à dautres risques.Confiez toutes les opérations de maintenance à un personnel  
qualifié.  
19. Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les opérations  
de maintenance à un personnel qualifié :  
A. Lorsque le cordon dalimentation ou la fiche est endommagé ou effiloché ;  
B. Si du liquide a été répandu sur/dans la télévision ;  
C. Si la télévision a été exposée à la pluie ou à leau ;  
D. Si la télévision ne fonctionne pas normalement même en respectant le mode demploi.Réglez uniquement  
les commandes abordées par le mode demploi.Des réglages inappropriés dautres commandes peuvent  
occasionner des dommages et nécessiteront ensuite, dans la plupart des cas, une intervention plus  
importante dun technicien qualifié pour que la télévision fonctionne normalement ;  
E. Si la télévision a été renversée ou que le châssis est endommagé ;  
F. Lorsque la télévision présente une altération visible des performances cela indique un besoin de  
maintenance.  
20. Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles  
de sécurité classiques afin de déterminer si la télévision est en bon état de marche.  
21. Lorsquun remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des pièces de  
rechange spécifiées par le fabricant et quelles aient les mêmes caractéristiques que la pièce dorigine. Des  
remplacements non autorisés peuvent occasionner un incendie, une électrocution ou dautres risques.  
10  
20F630[06-10].p65  
10  
25/3/03, 2:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Supplied Accessories  
Infrared Remote Control/Part Number  
RRMCGA108WJSA  
Dry batteries size “AA”/  
1.5 V cc  
Before OperatingYour Television  
Location  
• For normal operation, yourTV should be located in an area of the room where cool adequate ventilation  
is provided. Do not place the back of the television set in a place where free airflow will be restricted.  
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys  
using magnets or any other magnetic substance, such as iron are kept well away from the TV set.  
Power  
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you  
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an  
electrician. Do not defeat the safety feature of the polarized plug.  
Note:  
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall  
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the  
POWER BUTTON in the OFF position.)  
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located  
near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn  
off either the TV or the radio.  
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received  
due to interference from the TV.  
L
Before using the television, prepare the Remote Control  
To use the remote control, insert batteries first.  
Insert the batteries  
Pull up  
Baterry  
Cover  
With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries  
(sizeAA”/1.5V cc).Be sure to match the battery terminals with the marks inside the compartment.  
e/d  
e/d  
Antenna Connections  
Antennas  
• The antenna requirements for good color television reception are more important than those for black  
& white television reception.For this reason, a good quality outdoor antenna is strongly recommended.  
The following is a brief explanation of the type of connections that are provided with the various  
antenna systems:  
1. A 75 ohm system is generally a round cable with F-type  
connector that can easily be attached to a terminal without  
tools (not supplied).  
F-type connector  
75-ohm coaxial cable (round)  
300-ohm twin-lead cable (flat)  
2. A 300 ohm system is a flat “twin-lead” cable that can be  
attached to a 75 ohm terminal through a 300-75 ohm  
ADAPTOR (not supplied).  
11  
20F630[11-15].p65  
11  
25/3/03, 2:50 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Antenna Connections (Continued)  
OUTDOOR ANTENNA CONNECTION  
• Use one of the following two diagrams if you connect an outdoor antenna.  
A: Using a VHF/UHF combination outdoor antenna.  
B: Using separate VHF and/or UHF outdoor antenna.  
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of  
the TV set.  
A. Combination VHF/UHF Antennas  
B. Separate VHF/UHF Antenna  
REAR OF TV  
VHF/UHF ANTENNA  
300/75-ohm  
ADAPTOR  
VHF/UHF ANTENNA  
or  
(Not supplied)  
300-ohm  
twin-lead  
VHF  
UHF  
ANTENNA ANTENNA  
300-ohm  
twin-lead  
IN  
1
COMPONENT  
LINE  
OUT  
Y
R
A
U
DIO  
P
B
R
L
R
L
P
V
IDEO  
75-ohm  
coaxial cable  
COMBINER  
(not supplied)  
300-ohm  
twin-lead  
IN OUT  
IN  
1
COMPONENT  
LINE  
OUT  
Y
PB  
PR  
R
75-ohm coaxial  
cable  
A
U
DIO  
L
R
L
or  
V
IDEO  
REAR OF TV  
NOTICE  
F-type connector  
F-type connector should be finger tightened only  
When connecting the RF cable to theTV set, do not tighten  
F-type connector with tools.  
If tools are used, it may cause damage to your TV set.  
(The breaking of Internal circuit, etc.)  
75-ohm coaxial cable  
CABLE TV (CATV) CONNECTION  
A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm  
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.  
Some cable TV companies offer premium pay channels. Since the signals of these premium pay  
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by  
the cable TV company.This converter/descrambler is necessary for normal viewing of the scrambled  
channels. (Set your TV on channel 3 or 4.Typically one of these channels is used. If this is unknown,  
consult your cable TV company.) For more specific instructions on installing cable TV, consult your  
cable TV company. One possible method of utilizing the converter/descrambler provided by your  
cable TV company is explained below.  
Please note: RF switch equipped with position A/B (not provided) is required.  
Aposition on the RF switch (not supplied): You can view all unscrambled channels using theTVs  
channel keys.  
Bposition on the RF switch (not supplied):  
You can view the scrambled channels via the converter/  
descrambler using the converters channel keys.  
RF switch (not supplied)  
Two-set  
signal  
splitter  
(not  
supplied)  
A
OUT  
IN  
B
Cable TV Line  
OUT  
IN  
Cable TV converter/  
descrambler  
(not supplied)  
Note:  
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.  
12  
20F630[11-15].p65  
12  
25/3/03, 2:50 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Quick Reference Control Operation  
L Location of Controls  
(ENGLISH)  
Front Panel  
POWER  
VIDEO IN 2 L-AUDIO-R  
Press On.  
Press again Off.  
SENSOR AREA FOR  
REMOTE CONTROL  
(INSIDE DOOR)  
MENU  
Press Accesses MAIN MENU.  
Press again Exits MAIN MENU.  
VOLUME UP/DOWN  
(+) Increases sound.  
() Decreases sound.  
CHANNEL UP/DOWN  
(8) Selects next higher channel.  
(9) Selects next lower channel.  
Basic Remote Control Functions  
POWER  
Infrared Transmitter Window  
Press On.  
CATV/DVD-TV/VCR MODE buttons  
Press TV/VCR, sends power and  
channel select commands (Channel up/  
down and Random Access buttons) to  
the TV and VCR control.  
Press CATV/DVD, sends power and  
channel select commands to a cable  
TV converter and DVD control.  
Press again Off.  
POWER  
CATV  
DVD  
TV  
REMOTE KEYPAD  
Accesses any channel from keypad.  
VCR  
FLASHBACK  
Returns to previous channel.  
DISPLAY INPUT  
1
4
2
5
8
3
6
PERSONAL PREFERENCE  
With the Personal Preference buttons,  
you can program your favorite programs  
by using the 4 categories A, B, C and  
D. The channels can be accessed  
quickly by using these buttons. (See  
page 40.)  
DISPLAY  
7
9
Press Displays receiving channel for  
FLASHBACK  
ENTER  
four seconds.  
0
100  
D
Press again Removes display.  
PERSONAL PREFERENCE  
Temporarily displays receiving channel  
when in Closed Caption mode.  
A
B
C
CH  
8
VOLUME UP/DOWN  
(+) Increases sound.  
() Decreases sound.  
VOL  
VOL  
+
;
:
INPUT  
9
CH  
Press Switch to external video INPUT  
1 mode or COMPONENT mode.  
Press 2 times Switch to external  
video INPUT 2 mode.  
MENU  
MUTE  
g
SKIP  
f
In menu mode, changes or selects  
the TV adjustments.  
9
VCR-CH  
8
POWER (DVD/VCR)  
PLAY  
:
REC  
MENU  
Press 3 times Switch back to the  
original TV mode. See page 45.  
REW  
(
FWD  
)
Press Accesses MAIN MENU.  
L
STOP  
Press again Exits MAIN MENU.  
PAUSE  
ENTER  
J
MUTE  
Used in some instances where a Cable  
Converter Box requires an enter”  
command after selecting channels,  
when using the REMOTE KEYPAD  
button. (See page 47)  
Press Mutes sound.  
Press again Restores sound.  
CLOSED CAPTION appears when  
sound is muted.  
TV CATV VCR DVD  
CHANNEL UP/DOWN  
POWER (DVD/VCR)  
Press On.  
(8) Selects next higher channel.  
(9) Selects next lower channel.  
Press again Off.  
See pages 37 ~ 39 for channel  
presetting.  
DVD/VCR CONTROL  
See page 47.  
Moves the a mark of the MENU  
screens.  
REC  
SKIP/VCR-CH  
Note:  
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the  
remote control, place it under a fluorescent light or other lighting.  
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.  
The degree of illumination will vary depending on the strength of lighting used.  
The degree of illumination will decrease with time and depending on the temperature.  
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.  
Sunlight and fluorescent lighting are the most effective when charging the display.  
13  
20F630[11-15].p65  
13  
25/3/03, 2:50 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Referencia rápida de los controles de operación  
L Ubicación de los controles  
(ESPAÑOL)  
Panel Delantero  
ALIMENTACION (POWER)  
ENTRADA VIDEO IN 2  
I-AUDIO-D  
Pulsando Enciende (On).  
Pulsando nuevamente Apaga (Off).  
ZONA DEL SENSOR DEL  
MANDO A DISTANCIA  
(POR DENTRO  
DE LA PUERTA)  
MENU (MENU)  
Pulsando Accede al MENU  
PRINCIPAL.  
Pulsando nuevamente →  
Sale del MENU PRINCIPAL.  
AUMENTO/DISMINUCION DEL VOLUMEN (VOL)  
(+) Aumenta el sonido.  
() Disminuye el sonido.  
CANAL SUPERIOR/INFERIOR (CH) MENU  
(8) Selecciona el siguiente canal superior.  
(9) Selecciona el siguiente canal inferior.  
Funciones Basicas Del Control Remoto  
ALIMENTACION (POWER)  
Ventanilla del transmisor de infrarrojos  
Pulsando Enciende (On).  
Botones DE TELEVISOR/TV POR  
CABLE (TV-CATV)  
Pulse TV/VCR, el mando envia los comandos  
de alimentación y selección de canales  
(botones de canal superior/inferior y de  
acceso aleatorio) a un televisor.  
Pulse CATV/DVD, envia los comandos de  
alimentación y selección de canales a un  
convertidor de TV por cable.  
Pulsando nuevamente Apaga (Off).  
TECLADO A DISTANCIA  
(REMOTE KEYPAD)  
Para tener acceso a cualquier canal  
empleando las teclas.  
POWER  
CATV  
DVD  
TV  
VCR  
DISPLAY INPUT  
RETORNO AL CANAL  
ANTERIOR (FLASHBACK)  
1
2
5
8
3
6
Para volver al canal anterior.  
VISUALIZACION (DISPLAY)  
4
PREFERENCIAS PERSONALES  
Pulsando  
Aparece el canal de  
Con los botones Personal Preference  
puede programar sus programas favoritos  
utilizando las cuatro categorías A, B, C y  
7
9
recepción por cuatro segundos.  
FLASHBACK  
ENTER  
Pulsando nuevamente  
visualización.  
Elimina la  
0
100  
D
PERSONAL PREFERENCE  
D. Puede acceder  
a
los canales  
En el modo de Closed Captionse  
A
B
C
rápidamente utilizando estos botones.  
muestra el canal de recepción por un  
CH  
8
(Consulte la página 40)  
corto tiempo.  
VOL  
VOL  
+
;
:
AUMENTO/DISMINUCION DEL  
VOLUMEN (VOLUME UP/DOWN)  
(+) Aumenta el sonido.  
9
CH  
ENTRADA (INPUT)  
Pulsando Cambia al modo de entrada  
1 del vídeo externo o al modo.  
Pulsando 2 veces Cambia al modo de  
entrada 2 del vídeo externo.  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
() Disminuye el sonido.  
POWER (DVD/VCR)  
En modo de MENU cambia o selecciona  
el ajuste del televisor.  
PLAY  
:
REC  
Pulsando 3 veces Vuelve al modo TV  
REW  
(
FWD  
)
L
STOP  
original. Consulte la página 45.  
PREPARACION (MENU)  
Pulsando  
Accede al MENU PRINCIPAL.  
INTRODUCIR (ENTER)  
PAUSE  
Pulsando nuevamente Sale del MENU  
J
Se utiliza en algunos casos en los cuales  
una Caja de Inversor de Cable requiere una  
orden enterdespués de seleccionar los  
PRINCIPAL.  
SILENCIAMIENTO (MUTE)  
canales, al usar el teclado  
(Consulte la página 47)  
a
distancia.  
Pulsando Silencia el sonido.  
Pulsando nuevamente Restaura el sonido.  
TV CATV VCR DVD  
CLOSED  
CAPTION  
aparece  
CANAL SUPERIOR/INFERIOR  
(CHANNEL UP/DOWN)  
automáticamente cuando el sonido es  
silenciado.  
(8) Selecciona el siguiente canal superior.  
Siempre y cuando la transmisión tenga  
esta señal.  
(9) Selecciona el siguiente canal inferior.  
Consulte las páginas 37 ~ 39 para  
obtener información sobre el preajuste  
de canales.  
En el modo de MENU, mueve la marca  
a .  
ALIMENTACION (DVD/VCR)  
[POWER (DVD/VCR)]  
Pulsando Enciende (On).  
Pulsando nuevamente Apaga (Off).  
SKIP/VCR-CH  
REC  
CONTROLES DEL DVD/VIDEO  
Consulte la página 47.  
Nota:  
Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad.Para usar el visor del control  
remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.  
El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún peligro.  
El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.  
El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.  
El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.  
La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.  
14  
20F630[11-15].p65  
14  
25/3/03, 2:51 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Référence rapide sur les commandes  
L Emplacement des touches  
(FRANÇAIS)  
Panneau Avant  
ALIMENTATION (POWER)  
Appuyer Pour mettre sous tension.  
Appuyer de nouveau Pour mettre hors  
tension.  
ENTREE VIDEO IN 2  
G-AUDIO-D  
ZONE DE DETECTION DU CAPTEUR  
(DERRIÉRE LE VOLET)  
RÈGLAGE (MENU)  
Appuyer Accès au MENU  
PRINCIPAL.  
Appuyer de nouveau Sortie du  
MENU PRINCIPAL.  
AUGMENTATION/RÉDUCTION  
DU VOLUME SONORE (VOL)  
(+) Pour augmenter le volume du son.  
() Pour diminuer le volume du son.  
TOUCHES DES CANAUX CROISSANT/  
DÉCROISSANT (CH) MENU  
(8) Sélectionne le canal supérieur suivant.  
(9) Sélectionne le canal inférieur précédent.  
Fonctions de base de la télécommande  
ALIMENTATION (POWER)  
Appuyer Pour mettre sous tension.  
Appuyer de nouveau Pour mettre hors  
tension.  
Fenêtre d’émission du signal infrarouge  
Touches DE MODE DE CÂBLOVISION/  
DVD-TÉLÉVISION/MAGNÉTOSCOPE  
(CATV/DVD-TV/VCR)  
Appuyer sur la touche télévision/  
magnétoscope (TV/VCR), permet de mettre  
le téléviseur et le magnétoscope sous/hors  
tension et de sélectionner ses canaux (tou-  
che de canaux en ordre croissant/décroissant  
et daccès direct).  
Appuyer sur la touche câblovision/DVD  
(CATV/DVD), permet de mettre un  
convertisseur de téléviseur par câble et un  
lecteur de DVD sous/hors tension et de  
sélectionner ses canaux.  
POWER  
CATV  
DVD  
TV  
PAVE NUMERIQUE DE COMMANDE  
VCR  
A DISTANCE (REMOTE KEYPAD)  
Sélectionne directement le canal voulu sur  
le pavé numérique.  
DISPLAY INPUT  
RETOUR (FLASHBACK)  
Rappelle le canal regardé précédent.  
1
4
2
5
8
3
6
PREFERENCES PERSONNELLES  
Grâce aux touches de préférence  
personnelle, vous pouvez programmer vos  
7
9
FLASHBACK  
ENTER  
programmes préférés  
à
laide des  
4
0
100  
D
catégories: A, B, C et D. Ces touches vous  
permettent daccéder rapidement à ces  
canaux. (Voir page 40)  
PERSONAL PREFERENCE  
AFFICHAGE (DISPLAY)  
Appuyer Pour afficher le canal reçu  
A
B
C
CH  
8
pendant quatre secondes.  
VOL  
VOL  
+
AUGMENTATION/RÉDUCTION DU  
Appuyer de nouveau  
Pour faire  
;
:
9
CH  
VOLUME SONORE (VOLUME UP/DOWN)  
(+) Pour augmenter le volume du son.  
() Pour diminuer le volume du son.  
disparaître le canal.  
Pour afficher temporairement le canal  
reçu en mode Sous-titres.  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
Pour changer ou sélectionner les  
réglages du téléviseur en mode menu.  
ENTRÉE (INPUT)  
PLAY  
:
Appuyer Pour sélectionner le mode  
ENTRÉE 1 vidéo externe ou le mode  
COMPOSANT.  
REC  
RÉGLAGE (MENU)  
REW  
(
FWD  
)
L
STOP  
Appuyer Accès au MENU PRINCIPAL.  
Appuyer de nouveau Sortie du MENU  
PRINCIPAL.  
Appuyer 2 fois Pour sélectionner le  
PAUSE  
J
mode ENTRÉE  
2
vidéo externe.  
Appuyer 3 fois Pour revenir au mode  
SOURDINE (MUTE)  
TV initial. Voir page 45.  
Appuyer Mise en sourdine du son.  
Appuyer de nouveau Rétablissement  
du son.  
ENTRER (ENTER)  
TV CATV VCR DVD  
Parfois utilisée lorsquun convertisseur  
nécessite lintroduction dune commande  
enteraprès la sélection de canaux à laide  
du pavé numérique de commande à dis-  
tance. (Voir page 47)  
CLOSED CAPTION apparaît lorsque  
le son est mis en sourdine.  
ALIMENTATION (DVD/VCR) [POWER  
(DVD/VCR)]  
Appuyer Pour mettre sous tension.  
Appuyer de nouveau Pour mettre hors  
tension.  
TOUCHES DES CANAUX CROISSANT/  
DÉCROISSANT (CHANNEL UP/DOWN)  
(8) Sélectionne le canal supérieur suivant.  
(9) Sélectionne le canal inférieur précedént.  
COMMANDE DU LECTEUR DE DVD/  
MAGNÉTOSCOPE  
Voir page 47.  
Voir pages 37 ~ 39 pour prérégler les  
canaux.  
Déplace le curseur a sur l’écran du  
REC  
MENU.  
Remarque:  
SKIP/VCR-CH  
Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans lobscurité lorsque la télécommande a été placée sous une  
ampoule fluorescente ou toute autre source lumineuse.  
Le matériau phosphorescent nest absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.  
Le degré dillumination variera en fonction de lintensité de la source d’éclairage.  
Le degré dillumination diminuera avec le temps, en fonction de la température.  
Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.  
Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des touches phosphorescentes.  
15  
20F630[11-15].p65  
15  
25/3/03, 2:51 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
EZ SETUP during First Use  
L
When you turn on the TV for the first time, it will automatically  
memorize the broadcast channels.  
POWER  
POWER  
CATV  
DVD  
TV  
VCR  
Please perform the following instructions before pressing the  
POWER button.  
(1) Insert the batteries into the remote control. (See page 11)  
(2) Connect the antenna cable to the TV set. (See page 11 ~ 12)  
(3) Plug in the AC POWER cord to the wall outlet.  
DISPLAY INPUT  
VOLUME  
(+)/()  
1
4
2
5
8
3
6
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
CHANNEL  
UP (8)/  
DOWN (9)  
A
B
C
CH  
8
VOL  
VOL  
+
;
:
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press POWER on the TV set or on the Remote Control to turn on  
SE L ECT L ANGUAGE  
the TV. The SELECT LANGUAGE mode will be displayed.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
(Remote Control)  
(On the Set)  
SE L ECT : CH 8 / 9  
SE T  
: VOL + / –  
POWER  
(SELECT LANGUAGE mode)  
SE L ECT L ANGUAGE  
2 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH  
(ESPAÑOL)” or “FRENCH (FRANCAIS)”.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
CH  
8
SE L ECT : CH 8 / 9  
SE T  
: VOL + / –  
9
CH  
3 Press VOL (+) or (–) to SET LANGUAGE and access EZ SETUP  
CONNECT ANT ENNA OR  
CAB L E  
mode.  
S T ART E Z SE TUP ?  
S TOP  
S T ART  
VOL  
VOL  
+
;
:
(EZ SETUP mode)  
4 Press VOL (+).  
P L EA SE WA I T  
The tuner will automatically search for the broadcast  
and cableTV channels. (The CH No. will automatically  
increase when it appears.)  
AUTO PROGRAMM I NG  
1 2 5  
S TOP  
S T ART  
If you want to stop the EZ SETUP process once it has  
started, press VOL (–) and it will be canceled.  
VOL  
+
:
If you want to SETUP again, please refer to page 36  
on CH SETUP.  
To cancel EZ SETUP  
Press VOL (–).  
5 Once EZ SETUP is completed, the lowest channel number  
2
memorized will be displayed.  
Note:  
• If EZ SETUP does not memorize all the channels in your region, please refer to page 37 for more  
information on manually memorizing the channels using CHANNEL SETTING.  
• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is  
incorrect or frequency jamming is occuring around the area. Please refer to pages 37 ~ 39 for more  
information on manually memorizing the channels using CHANNEL SETTING.  
16  
20F630[16-20].p65  
16  
25/3/03, 2:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Demo Mode  
(On the Set)  
or  
To quickly learn more about the TV set, press and hold for  
more than three seconds both CH UP (8) and DOWN (9) or  
MENU on the TV set.The TV set will go into DEMO mode and  
briefly explain the various features.  
To cancel DEMO mode, again press and hold for more than  
three seconds both CH UP (8) and DOWN (9) or MENU on  
the TV set.  
MENU  
button  
CHANNEL  
UP (8)/  
DOWN (9)  
buttons  
Example:  
DEMO mode display  
F
r
o
m
SHARP  
M
i
nds  
duc  
SHARP  
P
r
o
t
s
Com  
e
Note:  
Without signal on COMPONENT IN, video input and antenna in, the DEMO mode cannot be activated.  
Accessing the MAIN MENU screen without Remote Control  
(On the Set)  
If you misplaced your Remote Control you can still access most settings via  
the MAIN MENU screen when you press MENU on the TV set.  
Some features of yourTV set will not be accessible without the Remote Control.  
If you lost your Remote Control, contact a Sharp Service Center for a  
replacement.  
MENU  
button  
17  
20F630[16-20].p65  
17  
25/3/03, 2:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Language  
L
L
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.  
Setting the ON SCREEN DISPLAY Language.  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
MENU  
SE TUP  
(MAIN MENU screen)  
2 Press CH UP (8) or DOWN (9) to move the amark to SETUP.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH  
8
9
CH  
SE TUP  
3 Press VOL (+) or () to access SETUP mode.  
SETUP  
L ANGUAGE  
ENERGY SAVE  
B L UE SCREEN  
VOL  
VOL  
+
;
:
(SETUP mode)  
L ANGUAGE  
4 Press VOL (+) or () to access LANGUAGE change mode.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
VOL  
;
VOL  
+
:
(LANGUAGE change mode)  
I D I OMA  
5 Press CH UP (8) or DOWN (9) to select ENGLISH, SPANISH  
(ESPAÑOL)or FRENCH (FRANCAIS).  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
CH  
8
9
CH  
MENU  
6 Press MENU to exit.  
18  
20F630[16-20].p65  
18  
25/3/03, 2:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Sleep Timer  
L
You can preset your television to turn off automatically in increments of 30, 60, 90 or 120  
minutes.  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press VOL (+) or () to access SLEEP TIMER mode.  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
MENU  
VOL  
VOL  
+
;
:
SE TUP  
(MAIN MENU screen)  
3 Press VOL (+) or () to set a sleep time of 30, 60, 90 or 120 minutes.  
SL EEP T I MER  
1 2 0M REMA I N  
VOL  
VOL  
+
;
:
(SLEEP TIMER mode)  
MENU  
4 Press MENU to exit.  
Note:  
To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”  
during step 3.  
While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular  
intervals or when the remotes DISPLAY key is pressed.  
19  
20F630[16-20].p65  
19  
25/3/03, 2:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Video Adjust  
Description of Adjustment Items  
VOLUME  
(+)/()  
CHANNEL  
UP (8)/  
DOWN (9)  
Selected  
item  
VOL UP (+) button  
VOL DOWN () button  
PERSONAL PREFERENCE  
A
B
C
D
CH  
8
PICTURE  
TINT  
To increase contrast  
To decrease contrast  
VOL  
VOL  
+
;
:
9
CH  
To make skin tones greenish  
To increase color intensity  
To increase brightness  
To increase sharpness  
To make skin tones purplish  
To decrease color intensity  
To decrease brightness  
To decrease sharpness  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
COLOR  
BRIGHT  
SHARP  
MENU  
COLOR  
TEMP.  
To choose a MH, HIGH, LOW or ML COLOR TONE.  
RESET  
To return all adjustments to factory preset levels.  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the amark to VIDEO  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
ADJUST.  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press VOL (+) or () to access PICTURE adjust mode.  
P I CTURE  
2 7  
VOL  
VOL  
+
;
:
_ _ _ _ _ _ _  
(PICTURE adjust mode)  
4 Press CH UP (8) or DOWN (9) to select the desired mode.  
(Refer to the diagram below.)  
TINT  
COLOR  
BRIGHT  
PICTURE  
CH  
8
COLOR TEMP.  
: CH DOWN (9)  
SHARP  
RESET  
9
CH  
: CH UP (8)  
5 Press VOL (+) or () to adjust the setting.  
P I CTURE  
2 7  
VOL  
VOL  
;
:
_ _ _ _ _ _ _  
+
VOL UP (+)  
increase contrast  
VOL DOWN ()  
decrease contrast  
6 Repeat steps 4 to 5 to adjust other settings.  
MENU  
7 Press MENU to exit.  
Note:  
VIDEO ADJUST setting is available for AIR or CABLE/INPUT 1/INPUT 2 and COMPONENT respectively.  
20  
20F630[16-20].p65  
20  
25/3/03, 2:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Audio Adjust  
Selected item  
VOL UP (+) button  
VOL DOWN (–) button  
TREBLE  
To increase treble response  
To decrease treble response  
BASS  
To increase bass response  
To decrease bass response  
BALANCE  
RESET  
To emphasize the right speakers volume  
To emphasize the left speakers volume  
To return all adjustments to factory preset levels.  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the “a” mark to “AUDIO  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
ADJUST”.  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access TREBLE adjust mode.  
TREB L E  
0
VOL  
VOL  
+
;
:
(TREBLE adjust mode)  
4 Press CH UP (8) or DOWN (9) to select the desired mode.  
(Refer to the diagram below.)  
CH  
8
TREBLE  
BASS  
BALANCE  
RESET  
9
CH  
5 Press VOL (+) or (–) to adjust the setting.  
TREB L E  
0
VOL  
VOL  
;
:
+
6 Repeat steps 4 to 5 to adjust other settings.  
MENU  
7 Press MENU to exit.  
21  
20F630[21-25].p65  
21  
25/3/03, 2:55 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Audio Select  
L
L
MTS (Multichannel TV Sound)  
This circuit allows reception of stereo or bilingual TV sound.  
INTERNAL SPEAKER SWITCH  
This function turns the TVs internal speakers ONor OFFwhen listening to sound from  
external speakers by using the AUDIO OUTPUT JACKS on page 46.  
L
FAO (Fixed Audio Output)  
This function turns the TVs internal speakers OFFand allows fixed audio output from the  
AUDIO OUTPUT JACKS on page 46. With FAO, the TVs volume control is disabled.  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the amark to AUDIO  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
SELECT.  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press VOL (+) or () to access AUDIO SELECT mode.  
AUD I O SE L ECT  
4 Press CH UP (8) or DOWN (9) to move the amark to MTS,  
MT S  
SPEAKER : ON  
FAO : OF F  
: SAP  
SPEAKERor FAO.  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(AUDIO SELECT mode)  
5 Press VOL (+) or () to select STEREO, SAPor MONOwhen  
AUD I O SE L ECT  
the amark is at MTSposition.  
MT S  
: S TEREO  
SPEAKER : ON  
FAO  
: OF F  
SPEAKER  
ON  
FAO  
ON  
MTS  
STEREO  
VOL  
VOL  
+
;
:
OFF  
OFF  
SAP  
(AUDIO SELECT mode)  
MONO  
MENU  
6 Press MENU to exit.  
Ex: Actual screen indicating ON AIR when receiving STEREO  
broadcasts  
Actual channel number  
1 2  
ON AIRwill appear next to STEREO or  
SAP when receiving STEREO or SAP broadcasts.  
S T E R E O O N A I R  
S A P  
O N A I R  
MO N O  
(CHANNEL call on screen)  
22  
20F630[21-25].p65  
22  
25/3/03, 2:55 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Audio Select (Continued)  
L
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.  
Stereo broadcasts  
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo  
sound.  
SAP broadcasts  
Television broadcast can be received with either MAIN or SAP sound.  
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)  
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)  
L
If stereo sound is difficult to hear.  
You can obtain clearer sound by manually switching to the fixed monaural mode.  
Note:  
Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo  
broadcast.You must switch the mode back to STEREO if you want to hear stereo sound again.  
MTS while in the INPUT mode does not change the type of sound; in this case, sound is determined  
by the video source.  
If the FAOmode is selected ON, the SPEAKERmode will automatically turn OFF.  
SPEAKERselecting will not affect FAOmode.  
23  
20F630[21-25].p65  
23  
25/3/03, 2:55 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Closed Caption  
L
HOWTO SET CLOSED CAPTION  
Your TV is equipped with an internal Closed Caption decoder. Closed  
Captionis a system which allows you to view conversations, narration,  
and sound effects in TV programs and home videos as subscript on  
your TV screen as shown on the right.  
Not all the programs and videos will offer closed caption. Please look  
for the “  
symbol to ensure that captions will be shown.  
Closed Caption broadcast can be viewed in two modes: CAPTION  
and TEXT. For each mode, two channels are available, CH1 and CH2:  
The [CAPTION] mode subscripts dialogues and commentaries of TV  
dramas and news programs while allowing clear view of the picture.  
The [TEXT] mode displays over the picture other various information  
(such as TV program schedule, weather forecast, etc.) that is  
independent of the TV programs.  
VOLUME  
(+)/()  
PERSONAL PREFERENCE  
A
B
C
D
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the amark to CLOSED  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CAPTION.  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press VOL (+) or () to access CLOSED CAPTION setting mode.  
CLOSED CAPT I ON  
MODE : CAPT I ON  
DAT A : CH 1  
VOL  
VOL  
+
;
:
(CLOSED CAPTION setting mode)  
CLOSED CAPT I ON  
4 Press CH UP (8) or DOWN (9) to move the amark to either  
MODEor DATA.  
MODE : CAPT I ON  
DAT A : CH 1  
CH  
8
9
CH  
5 Press VOL (+) or () to change the CLOSED CAPTION setting.  
CLOSED CAPT I ON  
CH 1  
CAPTION  
MODE : CAPT I ON  
DAT A : CH 1  
MODE:  
DATA:  
CH 2  
TEXT  
OFF  
VOL  
VOL  
+
;
:
MENU  
6 Press MENU to exit.  
Note:  
If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION] mode  
automatically. Pressing MUTE again will return the set to its previous condition.  
CLOSED CAPTION may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if  
there are problems at the broadcast source. This does not necessarily indicate a problem with your TV.  
If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the  
CLOSED CAPTION will disappear momentarily.  
When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen may  
become dark and blank. Should this occur, set the CLOSED CAPTION mode to OFF.  
24  
20F630[21-25].p65  
24  
25/3/03, 2:55 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (V-CHIP Operation)  
L
V-CHIP  
This function allows you to restrict TV programs and also allows you to control TV usage based on  
FCC data.This function is to prevent your children from watching violence or sexual scenes that may  
be harmful.  
Restriction of TV programs includes two characters that contain information about the programs  
MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are  
restricted by age and contents.  
Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for  
complete control.  
[1] MPAA RATING  
RATING  
G
GENERAL AUDIENCES. All ages admitted.  
PG  
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for  
children.  
age  
base  
PG-13  
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate  
for children under 13.  
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.  
NO ONE 17 AND UNDER ADMITTED.  
NC-17  
X
X Rating is an older rating that is unified with NC-17 but may be encoded on  
older movies data.  
MPAA RATING (Example)  
Example 1.  
Example 2.  
PG-13in the age based RATING is blocked,  
this will automatically block the high ratings  
R, NC-17, Xalso.  
Rin the age based RATING is blocked, this  
will automatically block the high rating NC-  
17, Xalso.  
1. User setting  
2. Block table  
1. User setting  
2. Block table  
not to  
not to  
G
–––––  
G
G
–––––  
G
block  
block  
not to  
not to  
PG  
–––––  
PG  
–––––  
PG  
PG  
block  
block  
Select  
block  
not to  
block  
PG-13 BLOCK  
BLOCK  
NC-17 BLOCK  
PG-13 ––––  
BLOCK  
NC-17 BLOCK  
PG-13  
R
PG-13  
R
age  
base  
age  
base  
auto-  
Select  
R
R
block  
block  
auto-  
block  
auto-  
block  
NC-17  
X
NC-17  
X
auto-  
auto-  
X
BLOCK  
X
BLOCK  
block  
block  
Note:  
MPAA RATING is only age based ratings.  
[2] TV PARENTAL GUIDELINES  
content base  
L
y
x
AGE  
D
S
V
FV  
(Fantasy  
Violence)  
RATING  
(Sexually  
(Adult  
(Sexual  
(Violence)  
Suggestive Language) Situation)  
Dialog)  
TV-Y (All children)  
V
V
V
V
TV-Y7 (Direct to Older Children)  
E
TV-G (General Audience)  
Age TV-PG (Parental Guidance  
base Suggested)  
V
V
V
V
V
TV-14 (Parents Strongly  
V
V
V
V
V
V
V
V
V
D
Cautioned)  
TV-MA (Mature Audience Only)  
V : Content Rating can be set.  
: Content Rating cannot be set (not normally broadcast by TV station).  
25  
20F630[21-25].p65  
25  
25/3/03, 2:55 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (V-CHIP Operation Continued)  
• TV-PARENTAL GUIDELINES (Example)  
AGE  
D
L
S
V
F V  
TV Y  
TV Y 7  
TV G  
TV PG  
TV 1 4  
TV MA  
RETURN  
Example 1.1 : Age Based setting  
Go through all select ratings and select unblocked for “AGE”.  
This will automatically unblock everything.  
V : B LOCK  
Example 1.2 : Age Based setting  
AGE  
D
V
V
L
V
V
V
S
V
F V  
For “TV-G” select “BLOCK” for “AGE”. This will automatically block the  
higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as  
“TV-G”.  
Furthermore, the content ratings “D”, “L, “S”, “V”, “FV” are automatically  
blocked as well for “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.  
TV Y  
TV Y 7  
TV G  
TV PG  
TV 1 4  
TV MA  
RETURN  
V
V
V
V
V
V
V
V
V
V
V : B LOCK  
Example 2.1 : Content Based setting  
AGE  
AGE  
AGE  
D
L
S
V
F V  
TV Y  
TV Y 7  
TV G  
TV PG  
TV 1 4  
TV MA  
RETURN  
For “TV-PG”, “TV-14” and “TV-MA” select unblocked for each content  
ratings (“D”, “L, “S”, “V”, “FV”) by leaving “AGE” unblocked for  
“TV-PG”, “TV-14” and “TV-MA”. If you choose to unblock for each one in  
content base.  
V : B LOCK  
Example 2.2 : Content Based setting  
D
L
S
V
F V  
TV Y  
TV Y 7  
TV G  
TV PG  
TV 1 4  
TV MA  
RETURN  
Then for “TV-PG” and select “BLOCK” for only “V” (Violence). This will  
automatically block the higher ratings “TV-14-V” and “TV-MA-V”  
(“TV-14” and “TV-MA” for Violence content only).  
Please note that with these settings blocking does NOT occur.If a program  
is rated only “TV-MA”; it must be rated “TV-MA-V” to be blocked.  
V
V
V
V : B LOCK  
Example 3 : Reset an Age Based setting  
For “TV-14” and select again “BLOCK” for “AGE”.  
This will again automatically block the content ratings “D”, “L, “S”, “V”,  
“FV” for “TV-MA” as well as “TV-14”.  
Please note that the lower age rating “TV-PG” did not change from its  
previous settings.  
D
L
S
V
F V  
TV Y  
TV Y 7  
TV G  
TV PG  
TV 1 4  
TV MA  
RETURN  
V
V
V
V
V
V
V
V
V
V : B LOCK  
Note:  
• Content ratings can be modified but only in the combinations indicated by an V in the table on page  
25.  
• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher  
age rating’s content setting to “BLOCK” regardless of their previous settings.  
• Changing a lower rating’sAGEsetting to “BLOCKautomatically changes all higher ratings toBLOCK”  
regardless of their previous settings.  
• Any rating’s “AGE” set to unblocked must have its content settings individually set.  
[3] ADDITIONAL MODE  
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES” new ratings system’s data  
can be downloaded when they become available. (See page 29.)  
26  
20F630[26-30].p65  
26  
25/3/03, 2:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (V-CHIP Operation Continued)  
L
HOWTO SET V-CHIP  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
7
9
FLASHBACK  
ENTER  
VOLUME  
(+)/()  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
[1] MPAA RATING  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the amark to  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
PARENTAL CONTROL.  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
PARENTA L CONTOL  
3 Press VOL (+) or () to access PARENTAL CONTROL mode.  
V CH I P B LOCK  
V I EW T I MER  
VOL  
VOL  
;
:
+
(PARENTAL CONTROL mode)  
4 Press VOL (+) or () to access V-CHIP BLOCK select mode, then  
V CH I P B LOCK  
press VOL (+) or () to select MPAA RATING.  
MPAA  
TV GU I DE L I NES  
OP T I ON  
SECRE T No . : – – – –  
STA TUS : OF F  
VOL  
VOL  
+
VOL  
VOL  
+
;
:
;
:
(V-CHIP BLOCK select mode)  
MPAA  
5 Press CH UP (8) or DOWN (9) to move the amark to PG,  
then press VOL (+) or () to select BLOCK. If you set PGto  
BLOCK, PG-13, R, NC-17and Xare automatically blocked.  
G
PG  
PG 1 3  
R
NC1 7  
: – – – – –  
: B LOCK  
: B LOCK  
: B LOCK  
: B LOCK  
: B LOCK  
CH  
8
X
VOL  
VOL  
+
RETURN  
;
:
9
CH  
6 Press CH UP (8) or DOWN (9) to move theamark to "RETURN",  
MPAA  
then press VOL (+) or () to exit V-CHIP BLOCK select mode.  
G
PG  
PG 1 3  
R
NC1 7  
: – – – – –  
: B LOCK  
: B LOCK  
: B LOCK  
: B LOCK  
: B LOCK  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
X
RETURN  
Note:  
Ex.  
If you set Gto BLOCK , all RATING are automatically blocked.  
If you set Xto BLOCK, G, PG, PG-13, Rand NC-17are not blocked.  
27  
20F630[26-30].p65  
27  
25/3/03, 2:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (V-CHIP Operation Continued)  
[2] TV GUIDELINES  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
V CH I P B LOCK  
2 Press VOL (+) or () to access V-CHIP BLOCK select mode, then  
MPAA  
TV GU I DE L I NES  
OP T I ON  
SECRE T No . : – – – –  
STA TUS : OF F  
press CH UP (8) or DOWN (9) to move the amark to TV  
GUIDELINES.  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(V-CHIP BLOCK select mode)  
3 Press VOL (+) or () to access TV GUIDELINES mode.  
AGE  
D
V
V
L
V
V
V
S
V
F V  
V
TV Y  
TV Y 7  
TV G  
TV PG  
TV 1 4  
TV MA  
RETURN  
V
V
V
V
V
V
V
V
V
V
V
VOL  
VOL  
;
:
V : B LOCK  
+
(TV GUIDELINES mode)  
4 To change CONTENT SETTING, press CH UP (8) or DOWN (9)  
to move the amark to the desired rating and then press VOL (+)  
or () to select.  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
5 Press CH UP (8) or DOWN (9) to move the amark to the desired  
content and then press VOL (+) or () to select either BLOCKor  
unblock (“– – – – –”).  
T V Y 7  
AGE  
D
L
S
V
F V  
RETURN  
: B LOCK  
: – – – – –  
: – – – – –  
: – – – – –  
: – – – – –  
: B LOCK  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(CONTENT RATING mode)  
6 Press CH UP (8) or DOWN (9) to move theamark to "RETURN",  
AGE  
D
V
V
L
V
V
V
S
V
F V  
TV Y  
TV Y 7  
TV G  
TV PG  
TV 1 4  
TV MA  
RETURN  
then press VOL (+) or () to return to TV GUIDELINES mode.  
V
V
V
V
V
V
V
V
V
V
CH  
8
VOL  
VOL  
+
;
:
9
CH  
V : B LOCK  
7 Repeat steps 4 to 5 until all ratings and their contents are set.  
MENU  
8 When done, press MENU to exit.  
28  
20F630[26-30].p65  
28  
25/3/03, 2:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (V-CHIP Operation Continued)  
[3] ADDITIONAL MODE (DOWNLOAD)  
There will be an additional new rating system. In that case, please set up as follows.  
Subsequently the new rating system will set up automatically.  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
V CH I P B LOCK  
2 Press VOL (+) or () to access V-CHIP BLOCK select mode, then  
MPAA  
TV GU I DE L I NES  
press CH UP (8) or DOWN (9) to move the amark to OPTION.  
OP T I ON  
SECRE T No . : – – – –  
STA TUS : OF F  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(V-CHIP BLOCK select mode)  
O P  
T
I
O N  
3 Press VOL (+) or () to access OPTION mode, then press CH UP  
(8) or DOWN (9) to move the amark to DOWNLOAD, then  
press VOL (+) or () to DOWNLOAD : ON.  
D OWN  
R
L
O A  
D
:
O N  
E
T
U R N  
CH  
8
VOL  
VOL  
+
VOL  
VOL  
+
;
:
;
:
9
CH  
(OPTION mode)  
MENU  
4 Press MENU to exit.  
DOWNLOAD V-CHIP DATA  
1
4
7
2
5
8
3
6
REMOTE  
KEYPAD  
9
FLASHBACK  
ENTER  
VOLUME  
(+)/()  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 If you watch the program containing New Rating System Data,  
P
L
E
A
S
E
W A  
O A  
I
T
the DOWNLOAD screen will be displayed.  
N OW D OW N  
C H  
L
D
T
I
A
N G  
V
I
P
D
A
(DOWNLOAD screen)  
2 The DOWNLOAD screen will disappear, once downloading is  
finished.  
Note:  
DOWNLOAD will not start, if you do not watch a program containing New Rating System Data.  
29  
20F630[26-30].p65  
29  
25/3/03, 2:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (V-CHIP Operation Continued)  
How to set Additional mode (Example)  
O P  
T
I
O N  
1 Repeat steps 1 to 2 of [3] ADDITIONAL MODE.  
C
C
d
d
n
n
.
.
E
F
n
r
g
e
l
n
i
c
s
h
h
R
a
a
t
t
i
i
n
n
g
g
s
s
R
2 Press CH UP (8) or DOWN (9) to move the amark to Cdn.  
English Ratings, then press VOL (+) or ().  
D OWN  
R
L
O A  
D
:
O N  
E
T
U R N  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(After download the rating data)  
C
A
N
8
A
+
D
I
A N  
E
N G  
L
I
S H  
3 You can select BLOCKor “– – – – –” (unblock) from each RATING  
:
:
:
:
:
:
B
L
C
C
G
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or ().  
P G  
1
1
R
4
8
E
+
+
T
CH  
8
O C K  
U R N  
S H O  
(
T
H R  
E
L
D
B
L
O C K  
)
VOL  
VOL  
+
;
:
9
CH  
(ENGLISH THRESHOLD BLOCK  
mode)  
C
A
N
A
D
I
A N  
F
R
E
N C H  
4 You can select BLOCKor “– – – – –” (unblock) from each RATING  
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or () if  
you select Cdn. French Ratingsin step 2.  
:
:
:
:
:
B
L
G
8
1
1
1
R
T
a
3
6
8
E
n
a
a
a
T
s
n
n
n
+
s
s
s
+
+
+
O C K  
U R N  
S H O  
(
H R  
E
L
D
B
L
O C K  
)
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(FRENCH THRESHOLD BLOCK  
mode)  
Note:  
In additional mode  
Including two types (English mode, French mode), altogether you are able to download 4 different  
modes.  
30  
20F630[26-30].p65  
30  
25/3/03, 2:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (V-CHIP Operation Continued)  
L
Turning On (Activating) the V-Chip Blocks  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
V CH I P B LOCK  
2 Press VOL (+) or (–) to access V-CHIP BLOCK select mode, then  
MPAA  
TV GU I DE L I NES  
OP T I ON  
SECRE T No . : – – – –  
STA TUS : OF F  
press CH UP (8) or DOWN (9) to move the “a” mark to “SECRET  
No.”.  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(V-CHIP BLOCK select mode)  
3 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.  
V CH I P B LOCK  
MPAA  
TV GU I DE L I NES  
OP T I ON  
SECRE T No . : 1 2 3 4  
STA TUS : OF F  
1
4
7
2
3
6
9
5
8
0
4 Press CH UP (8) or DOWN (9) to move the “a” mark to “STATUS”,  
then press VOL (+) or (–) to activate theV-CHIP BLOCK.(If STATUS  
is OFF, V-CHIP BLOCK will not operate.)  
V CH I P B LOCK  
MPAA  
TV GU I DE L I NES  
OP T I ON  
SECRE T No . : 1 2 3 4  
STA TUS : OF F  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
MENU  
5 When done, press MENU to exit.  
L
To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.  
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you view a  
program containing Program Rating data as same as you  
configured.  
2 3  
V CH I P HAS BE EN  
AC T I VA TED  
T V Y 7  
FV  
Note:  
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is  
not configured to “ON”.  
2 Press MENU, then “INPUT SECRET No.will be displayed.  
I NPUT SECRE T N o .  
MENU  
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then  
V-CHIP BLOCK temporarily will be canceled. If the wrong SECRET  
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.  
Input the SECRET No. again in this case.  
I NPUT SECRE T N o .  
∗ ∗ ∗ ∗  
1
4
7
2
5
8
3
6
9
0
Note:  
• If you turn the power from OFF, the V-CHIP BLOCK will automatically reset to ON again.  
31  
20F630[31-35].p65  
31  
25/3/03, 2:59 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (V-CHIP Operation Continued)  
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)  
1 Repeat steps 1 to 3 of [1] MPAA RATING, then INPUT SECRET  
I NPUT SECRE T N o .  
No.will be displayed.  
2 Enter the 4-digit INPUT SECRET No.using the REMOTE  
KEYPAD and the V-CHIP select mode will be displayed. Repeat  
configuration of the V-CHIP BLOCK.  
I NPUT SECRE T N o .  
∗ ∗ ∗ ∗  
1
4
7
2
5
8
3
6
9
0
L If you forget or need to change your Secret No., clear the original Secret No. and set up a  
new one.  
1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [LTo cancel  
the V-CHIP BLOCK screen while V-CHIP BLOCK has been  
activated], then INPUT SECRET No.will be displayed.  
(On the Set)  
2 Press and hold both VOL (+) and CH UP (8) on the TV set  
simultaneously until the message INPUT SECRET No.disappears.  
VOL (+)/CH UP (,)  
buttons  
MENU  
3 Press the MENU button to exit.  
32  
20F630[31-35].p65  
32  
25/3/03, 2:59 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (VIEW TIMER)  
L
VIEW TIMER  
This function allows you to restrict TV viewing time and also allows you to controlTV usage.  
This function is to prevent your children from watching too much TV.  
VIEWING TIME (an accumulative timer: counts only the time  
duration acquired while the TV is on.)  
VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10  
V I EW T I MER  
hours) in 30 minutes intervals.  
V I EW I NG T I ME  
H M  
OF F T I ME  
H M  
SECRE T No . : – – – –  
STA TUS : OF F  
OFF TIME (RestrictsTV watching after theVIEWINGTIME reaches  
zero.)  
OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours) in  
30 minutes intervals.  
STATUS (ON/OFF setting of VIEW TIMER)  
L
How to set VIEW TIMER.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
1 Press MENU to access the MAIN MENU screen.  
2 Press CH UP (8) or DOWN (9) to move the amark to  
PARENTAL CONTROL.  
CH  
8
MENU  
SE TUP  
9
CH  
(MAIN MENU screen)  
PARENTA L CONTROL  
3 Press VOL (+) or () to access PARENTAL CONTROL mode.  
4 Press CH UP (8) or DOWN (9) to move the amark to VIEW  
V - CH I P B LOCK  
V I EW T I MER  
TIMER.  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(PARENTAL CONTROL mode)  
V I EW T I MER  
5 Press VOL (+) or () to access VIEW TIMER mode.  
V I EW I NG T I ME  
H M  
OF F T I ME  
H M  
SECRE T No . : – – – –  
STA TUS : OF F  
VOL  
VOL  
;
:
+
(VIEW TIMER mode)  
V I EW T I MER  
6 Press CH UP (8) or DOWN (9) to select VIEWING TIMEand  
OFF TIME. For each selection, press VOL (+) or () to set the  
V I EW I NG T I ME  
2H 0 0M  
OF F T I ME  
H M  
SECRE T No . : – – – –  
STA TUS : OF F  
time duration.  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
7 Press CH UP (8) or DOWN (9) to select SECRET No.. Enter a  
V I EW T I MER  
4-digit SECRET No. using REMOTE KEYPAD.  
V I EW I NG T I ME  
2H 0 0M  
1
4
7
2
5
8
3
6
9
OF F T I ME  
CH  
8
5H 0 0M  
SECRE T No . : – – – –  
STA TUS : OF F  
9
CH  
0
8 Press CH UP (8) or DOWN (9) to select STATUS. Press  
VOL (+) or () to turn ON the VIEW TIMER. (If STATUS is OFF,  
VIEW TIMER will not operate.)  
V I EW T I MER  
V I EW I NG T I ME  
2H 0 0M  
OF F T I ME  
5H 0 0M  
SECRE T No . : 1 2 3 4  
STA TUS : ON  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
33  
20F630[31-35].p65  
33  
25/3/03, 2:59 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (VIEW TIMER Continued)  
MENU  
9 Press MENU to exit.  
Example  
V I EW T I MER  
To restrict anybody from watching the TV for 5 hours, after watching  
the TV for 2 hours, your settings would look like this:  
V I EW I NG T I ME  
2H 0 0M  
OF F T I ME  
5H 0 0M  
SECRE T No . : 1 2 3 4  
STA TUS : ON  
They can choose to watch the 2 hours of TV however they wish. For  
example, they could watch 1 hour of TV, turn TV off for 30 minutes,  
then turn TV on and watch the remaining 1 hour on the VIEWING  
TIMER.  
L
To change the VIEW TIMER settings. (SECRET No. is registered)  
I NPUT SECRE T N o .  
1 Repeat How to set VIEW TIMERsteps and select PARENTAL  
CONTROL VIEW TIMERduring step 3. Press VOL (+) or (), and  
INPUT SECRET No.will be displayed.  
VOL  
VOL  
;
:
+
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, and  
V I EW T I MER  
the VIEW TIMER mode will be displayed. Repeat step 6 ~ 9.  
V I EW I NG T I ME  
2H 0 0M  
OF F T I ME  
5H 0 0M  
SECRE T No . : 1 2 3 4  
STA TUS : OF F  
1
4
7
2
5
8
3
6
9
0
Note:  
When you choose the correct SECRET No., the VIEW TIMER mode is  
displayed. If the wrong SECRET No. is chosen, SECRET No. IS  
INCORRECTis displayed. Input the SECRET No. again in this case.  
SECRE T No . I S  
I NCORRECT  
L
To cancel the VIEW TIMER (While the TV set is OFF but the VIEW  
TIMER is set)  
T I ME OVER  
I NPUT SECRE T No .  
1 Turn on TV; a blue screen message TIME OVERwill appear. If  
you do nothing, the TV will turn off in approximately 30 seconds.  
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.When  
you choose the correct SECRET No., theVIEWTIMER is canceled.  
If the wrong SECRET No.is chosen, SECRET No.IS INCORRECT”  
is displayed. Input the SECRET No. again in this case.  
T I ME OVER  
I NPUT SECRE T No .  
∗ ∗ ∗ ∗  
1
4
7
2
5
8
3
6
9
0
L
To cancel the VIEW TIMER setting or change the SECRET No.  
(When you forget the SECRET No.)  
I NPUT SECRE T N o .  
1 Repeat How to set VIEW TIMERsteps and select PARENTAL  
CONTROL VIEW TIMERduring step 3. Press VOL (+) or (), and  
INPUT SECRET No.will be displayed.  
34  
20F630[31-35].p65  
34  
25/3/03, 2:59 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Parental Control (VIEW TIMER Continued)  
(On the Set)  
2 Press and hold both VOL (+) and CH UP (8) on the TV set  
simultaneously until the VIEW TIMER mode is displayed. Now you  
can cancel the VIEW TIMER settings or change the SECRET No.  
while INPUT SECRET No.is displayed.  
VOL (+)/CH UP (,)  
buttons  
L
Notice of Remaining VIEWING TIME  
V I EW T I MER  
0 H 3 0M REMA I N  
For every 30 minute interval, the remaining timewill be displayed for  
4 seconds.For the last 5 minutes, the remaining timewill be displayed  
every minute.  
V I EW T I MER  
0 H 0 5M REMA I N  
V I EW T I MER  
0 H 0 0M REMA I N  
• “0H00M REMAINwill be displayed for 10 seconds just before the  
VIEWING TIME is complete.  
35  
20F630[31-35].p65  
35  
25/3/03, 2:59 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Ch Setup  
L
EZ SETUP  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
By operating the channel preset functions, you can preset your  
TV to the desired channels for viewing.  
7
9
FLASHBACK  
ENTER  
VOLUME  
(+)/(–)  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the “a” mark to “CH  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
SETUP”.  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access CH SETUP mode, then press  
CH SE TUP  
CH UP (8) or DOWN (9) to move the “a” mark to “EZ SETUP”.  
A I R / CA B L E  
CH MEMORY  
CH  
8
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
VOL  
VOL  
+
;
:
9
CH  
(CH SETUP mode)  
4 Press VOL (+) or (–) to access EZ SETUP mode.  
CONNECT ANTENNA OR  
CAB L E  
ST ART E Z SE TUP ?  
S TOP  
S T ART  
VOL  
VOL  
;
:
+
(EZ SETUP mode)  
5 Press VOL (+).  
P L EASE WA I T  
The tuner will automatically search for the broadcasting and cable  
TV channels. (The CH No. will automatically increase when it  
appears.)  
AUTO PROGRAMM I NG  
1 2 5  
S TOP  
S T ART  
If you want to stop the EZ SETUP process once it has started,  
press VOL (–). Search will be canceled.  
VOL  
To cancel EZ SETUP  
:
+
Press VOL (–).  
6 Once EZ SETUP is completed, the lowest channel number  
2
memorized will be displayed.  
36  
20F630[36-40].p65  
36  
25/3/03, 3:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Ch Setup (Continued)  
L CHANNEL SETTING  
If EZ SETUP does not memorize all the channels in your region, follow the instructions below  
to manually memorize the channel.  
1 AIR/CABLE setting  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
2 Press CH UP (8) or DOWN (9) to move the amark to CH  
SETUP.  
AUD I O SE L ECT  
CH  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
SE TUP  
8
MENU  
9
CH  
(MAIN MENU screen)  
3 Press VOL (+) or () to access CH SETUP mode.  
CH SE TUP  
A I R / CA B L E  
CH MEMORY  
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
VOL  
VOL  
+
;
:
(CH SETUP mode)  
4 Press VOL (+) or () to access AIR/CABLE mode.  
A I R / CAB L E  
A I R  
CAB L E STD  
CAB L E HRC  
CAB L E I RC  
VOL  
VOL  
+
;
:
(AIR/CABLE mode)  
5 Press CH UP (8) or DOWN (9) to move the amark to the desired  
A I R / CAB L E  
mode.  
A I R  
CAB L E STD  
CAB L E HRC  
CAB L E I RC  
CH  
8
CABLE STD  
CABLE HRC  
CABLE IRC  
AIR  
9
CH  
(AIR/CABLE mode)  
MENU  
6 Press MENU to exit.  
Note:  
Receivable channels of your TV set are:  
AIR channels:  
CABLE channels:  
1 (HRC and IRC mode only)  
VHF: 2 through 13.  
UHF: 14 through 69.  
2 through 125 (STD, HRC and IRC)  
37  
20F630[36-40].p65  
37  
25/3/03, 3:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Ch Setup (Continued)  
2 How to save broadcast TV channels into memory.  
POWER  
CATV  
DVD  
TV  
VCR  
DISPLAY INPUT  
1
4
2
5
8
3
6
VOLUME  
(+)/()  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
CH  
8
1.1 Press MENU to access the MAIN  
MENU screen, then press CH UP  
(8) or DOWN (9) to move the a”  
mark to CH SETUP.  
CH SE TUP  
MENU  
A I R / CA B L E  
CH MEMORY  
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
9
CH  
CH  
8
1.2 Press VOL (+) or () to access CH  
(CH SETUP mode)  
VOL  
VOL  
+
SETUP mode, then press CH UP (8)  
;
:
9
CH  
or DOWN (9) to move the amark  
to CH SEARCH.  
VOL  
VOL  
1.3 Press VOL (+) or () to access CH  
;
:
+
SEARCH mode.  
START  
(START)  
2.1 Press VOL (+).The tuner will search  
through all available channels in your  
area and add them into the TVs  
memory.  
CH SEARCH  
VOL  
:
+
A I R  
1 2  
S TOP  
S T ART  
STOP  
(CH SEARCH mode)  
(STOP)  
2.2 Press VOL ().CH SEARCH will stop  
at the current channel and will not  
add any higher channels.  
VOL  
;
MENU  
2.3 Press MENU to exit.  
Note:  
If you press VOL (+) again while in the CH SEARCH mode, auto-  
program will start again, and the previously memorized channels will  
be lost.  
38  
20F630[36-40].p65  
38  
25/3/03, 3:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Ch Setup (Continued)  
3 How to add or erase weak, additional or unwanted channels from TV memory.  
1 Press MENU to access the MAIN MENU screen, then press CH  
MENU  
S L EEP T I MER  
UP (8) or DOWN (9) to move the amark to CH SETUP.  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
CH SE TUP  
2 Press VOL (+) or () to access CH SETUP mode, then press CH  
UP (8) or DOWN (9) to move the amark to CH MEMORY.  
A I R / CA B L E  
CH MEMORY  
CH  
8
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
VOL  
VOL  
+
;
:
9
CH  
(CH SETUP mode)  
CH MEMORY  
3 Press VOL (+) or () to access CH MEMORY mode.  
A I R  
1 2  
ERAS E  
ADD  
VOL  
VOL  
;
:
+
(CH memory mode)  
4 Use CH UP (8) or DOWN (9) or REMOTE KEYPAD to select  
each desired channel to add or erase.  
1
4
7
2
5
8
3
6
CH  
8
or  
9
9
CH  
ENTER  
0
100  
5 Press VOL (+) to add a channel to the TVs memory or press VOL  
() to erase a channel from the TVs memory.  
VOL  
VOL  
+
;
:
MENU  
6 Press MENU to exit.  
39  
20F630[36-40].p65  
39  
25/3/03, 3:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Ch Setup (Continued)  
L
PERSONAL PREFERENCE  
By setting the PERSONAL PREFERENCE channels in advance,  
you can select your favorite channels easily.  
REMOTE  
KEYPAD  
1
4
2
5
8
3
6
7
9
FLASHBACK  
ENTER  
VOLUME  
(+)/()  
CHANNEL  
UP (8)/  
DOWN (9)  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
PERSONAL  
PREFERENCE  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
2 Press CH UP (8) or DOWN (9) to move the amark to  
CH SETUP.  
CH  
8
MENU  
PARENT A L CONTROL  
CH SE TUP  
SE TUP  
9
CH  
(MAIN MENU screen)  
CH SE TUP  
3 Press VOL (+) or () to access CH SETUP mode, then press  
CH UP (8) or DOWN (9) to move the amark to PERSONAL  
A I R / CA B L E  
CH MEMORY  
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
PREFERENCE.  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(SETUP mode)  
4 Press VOL (+) or () to select PERSONAL PREFERENCE select  
mode in which you can program 4 favorite channels, in 4 different  
categories. (total of 16 channels)  
PERSONA L PRE F .  
< A >  
B
C
D
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
VOL  
VOL  
+
;
:
(PERSONAL PREFERENCE select mode)  
PERSONA L PRE F .  
5 Press CH UP (8) or DOWN (9) to move the amark to the desired  
position.  
< A >  
B
C
D
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
CH  
8
9
CH  
6 Press REMOTE KEYPAD on the Remote to input the CHANNEL  
PERSONA L PRE F .  
Number into the memory.  
< A >  
B
C
D
1
4
7
2
5
8
3
6
1 2 5  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
Example:  
125 Press 100followed by 2and then 5.  
9
ENTER  
25 Press 2and then 5.  
0
100  
4
Press 0and then 4.  
7 Repeat steps 4 to 6 to input the next CHANNEL Number.  
MENU  
8 Press MENU to exit.  
To select the PERSONAL PREFERENCE channel.  
PERSONA L PRE F .  
If the channels are memorized as shown to the right,  
< A >  
B
C
D
press the Remotes Abutton to select the Channels below.  
1 2 5  
2 5  
4 0  
4
8 5  
1 2 3  
5 5  
3 8  
3 0  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
125 25 40  
4
– – –  
40  
20F630[36-40].p65  
40  
25/3/03, 3:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Ch Setup (Continued)  
VOLUME  
(+)/(–)  
L
UNIVERSAL PLUS FUNCTION  
PERSONAL PREFERENCE  
VCR or DVD input mode will be selected automatically by pressing  
the VCR or DVD PLAY buttons on the UNIVERSAL REMOTE  
CONTROL.  
A
B
C
D
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the “a” mark to “CH  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
SETUP”.  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access CH SETUP mode, then press  
CH SE TUP  
CH UP (8) or DOWN (9) to move the “a” mark to “UNIVERSAL  
A I R / CA B L E  
CH MEMORY  
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
PLUS”.  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(CH SETUP mode)  
UN I VERSA L P L US  
4 Press VOL (+) or (–) to access UNIVERSAL PLUS to select VCR  
or DVD mode.  
VCR : OF F  
DVD : OF F  
VOL  
VOL  
+
;
:
(EZ SETUP mode)  
UN I VERSA L P L US  
5 Press CH UP (8) or DOWN (9) to select the VCR or DVD, and  
press VOL (+) or (–) to select “CH3, CH4”, “INPUT 1 (or  
COMPONENT)”, “INPUT 2” or “OFF”.  
VCR : CH 3  
DVD : OF F  
INPUT 1 (or COMPONENT)  
INPUT 2  
CH3  
CH4  
OFF  
Set model to the input in which your  
VCR or DVD is connected to. If done  
through RF, select either channel 3 or  
4 to match the setting of the VCR or  
DVD.  
(UNIVERSAL PLUS select mode)  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
MENU  
6 Press MENU to exit.  
41  
20F630[41-45].p65  
41  
25/3/03, 3:02 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Set Up  
L ENERGY SAVE  
POWER  
CATV  
DVD  
TV  
This feature lets you lower the power consumption of yourTV set  
which in turn saves you money and minimizes the impact on the  
environment. When this feature is turned on, it reduce the  
brightness of the TV to a level that consumes approximately 20  
percent less energy than when the feature is turned off.  
The reduction in brightness will be less noticeable under low room  
lighting conditions.  
VCR  
DISPLAY INPUT  
1
4
2
5
8
3
6
VOLUME  
(+)/()  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
A
B
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the amark to SETUP.  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
SETUP  
3 Press VOL (+) or () to access SETUP select mode, then press  
CH UP (8) or DOWN (9) to move the amark toENERGY SAVE.  
L ANGUAGE  
ENERGY SAVE  
B L UE SCREEN  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(SETUP mode)  
4 Press VOL (+) or () to access ENERGY SAVE select mode.  
ENERGY SAVE  
: OF F  
VOL  
VOL  
;
:
+
(ENERGY SAVE select mode)  
5 Press VOL (+) or () to select ON.  
ENERGY SAVE  
: ON  
VOL  
VOL  
+
;
:
MENU  
6 Press MENU to exit.  
42  
20F630[41-45].p65  
42  
25/3/03, 3:02 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Set Up (Continued)  
L BLUE SCREEN  
Automatically turns the screen blue if a broadcast signal is not received.  
1 Press MENU to access MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the amark to SETUP.  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH  
8
MENU  
9
CH  
SE TUP  
(MAIN MENU screen)  
SETUP  
3 Press VOL (+) or () to access SETUP mode, then press CH UP  
(8) or DOWN (9) to move the amark to BLUE SCREEN.  
L ANGUAGE  
ENERGY SAVE  
B L UE SCREEN  
CH  
8
VOL  
VOL  
+
;
:
9
CH  
(SETUP mode)  
4 Press VOL (+) or () to access BLUE SCREEN select mode.  
B L UE SCREEN  
: OF F  
VOL  
VOL  
;
:
+
(BLUE SCREEN select mode)  
5 Press VOL (+) or () to select ON.  
B L UE SCREEN  
: ON  
VOL  
VOL  
+
;
:
MENU  
6 Press MENU to exit.  
When BLUE SCREEN is set to ON.  
No signal  
Blue screen  
TV off  
After five  
seconds  
After 15  
minutes  
Standby  
mode  
Note:  
Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function  
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch  
the BLUE SCREEN OFF.  
43  
20F630[41-45].p65  
43  
25/3/03, 3:02 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Using the Video and Audio Input Jacks  
L Connecting video equipment for playback of video material.  
When the television is connected to video equipment as shown below, the material being played back  
on the video equipment can be seen on the television screen.  
Connecting video device equipped with video output terminals.  
CONNECTIONS  
(Front connection  
terminals of TV)  
VIDEO EQUIPMENT  
(Pull open for inside door)  
To VIDEO OUTPUT  
CAMCORDER  
To AUDIO OUTPUT (L)  
To AUDIO OUTPUT (R)  
(Rear connection  
terminals of TV)  
IN 1  
COMPONENT  
LINE  
OUT  
R
Y
AUDIO  
L
TV GAME  
P
B
R
R
L
P
VIDEO  
VCR  
DVD  
To VIDEO OUTPUT  
To AUDIO OUTPUT (L)  
To AUDIO OUTPUT (R)  
44  
20F630[41-45].p65  
44  
25/3/03, 3:02 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Using the Video and Audio Input Jacks (Continued)  
(Rear connection terminals of TV)  
Video Equipment  
IN 1  
COMPONENT  
Video Equipment with  
Component Video  
LINE  
OUT  
R
Y
AUDIO  
L
(Component Color)  
PB  
Output Jacks (Y, PB and PR  
)
R
L
PR  
VIDEO  
To AUDIO  
OUTPUT  
(L/R)  
To COMPONENT  
VIDEO OUTPUT  
Jacks  
L To watch video material playback.  
Press the Remotes INPUT button to select the VIDEO INPUT mode for the video equipment you wish  
to play.  
The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.  
AIR  
or  
CABLE  
INPUT 1 (or COMPONENT)  
INPUT 2  
(IN 2)  
Front  
(IN 1)  
Rear  
When the AV cables are being connected to the VIDEO INPUT 1 and COMPONENT Y terminals  
simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.  
INPUT mode can be selected by pressing either the CH UP (8) on theTV remote control when theTV  
is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to the  
lowest channel.  
Note:  
When connecting video or audio equipment to the television, be sure that the power is turned off in  
order to prevent damage to either the television or the equipment being connected.  
It is the intent of SHARP that this product be used in full compliance with the copyright law of the  
United States and that prior permission be obtained from copyright owners whenever necessary.  
For detailed information on the connection and use of auxiliary equipment, refer to the instruction  
manuals of the equipment being used.  
The connection cords can be obtained from your local video store.  
45  
20F630[41-45].p65  
45  
25/3/03, 3:02 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Using the Audio Output Jacks  
L
These jacks are used for connecting an external audio amplifier. The STEREO/MONO/SAP,  
VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or  
directly on theTV itself.These jacks relay the audio signal of all programs being displayed on  
theTV screen.  
(AUDIO OUTPUT JACKS are located on the rear of the cabinet.)  
CONNECTIONS  
(Rear connection  
terminals of TV)  
IN 1  
COMPONENT  
LINE  
OUT  
IN  
1
R
COMPONENT  
Y
PB  
PR  
LINE  
OUT  
Y
R
AUDIO  
L
P
B
R
R
L
P
VIDEO  
AUDIO  
L
R
L
VIDEO  
To the audio  
input terminals  
Stereo Amplifier  
Speaker System  
(1) Before connecting the cables, turn on theTV and adjust theVOLUME control on theTV to a moderate  
listening level.  
(2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT JACKS on the TV.  
(3) Turn the TV set and stereo amplifier on.  
(4) If you desire, you can turn off the sound to the TV’s internal speakers by acessing the TV’s AUDIO  
SELECT mode. See page 22 ~ 23.  
(5) Adjust the VOLUME control on the stereo amplifier for a moderate listening level.  
(6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,  
MUTE and FAO), from either the remote control, or directly from the TV set.  
Note:  
• For detailed information on the connection and use of auxiliary equipment, refer to the operation  
manuals of the equipment being used.  
• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio  
connection cord and plug adaptor as shown below.  
• For optimal sound quality, we recommend you to keep the TV’s audio output level high.  
Plug adapter  
To the equipment  
being connected  
To the TV  
Pin plug x 2  
Pin Plug  
Pin jack/Mini plug  
46  
20F630[46-50].p65  
46  
25/3/03, 3:04 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Operation of Remote Control  
L Universal Remote Control  
L IdentifyingRemote VCRs, cable TV  
conveters and DVDs  
With the purchase of your television set you  
also have received the latest innovation in  
remote control technology.With its easy-to-use  
push button keyboard, your Remote can control  
your television set and most infrared remote  
controlled VCRs, cable TV converters and  
DVDs as well.  
Your Remote Control has been set at the factory  
to operate your TV and many remote control  
VCRs, cable TV converters and DVDs.  
However, in some cases an easy one-time set-  
up step may be necessary before the Remote  
will operate accessory VCRs, cable TV  
converters and DVDs.  
In this set-up step, the Remote locates and  
memorizes the remote control transmitter code  
for the VCR, cable TV converters and DVDs.  
Once identified, the Remote sends the proper  
remote signals to operate your accessory.  
This identify step will not have to be repeated  
until power to the Remote is interrupted due to  
a battery failure.  
Note:  
Depending on the model, year produced, brand  
and type of VCR, cable TV converter and DVD,  
some models may not be compatible with the  
remote control.  
Some brands may not enable channel selection  
until the ENTER button is pressed.  
Example:  
L USING YOUR REMOTE CONTROL WITH A  
When you select channel 24,  
VCR  
(1) Press REMOTE KEYPAD 2.  
(2) Press REMOTE KEYPAD 4.  
(3) Press ENTER.  
For detailed information on the use of the Cable  
TV converter Box refer to their operating  
manuals.  
Once you make certain the Remote Control has  
identifiedyour remote controlledVCR or DVD,  
the Remote Control is ready to operate your  
unit.The various VCR or DVD function buttons  
on the Remote Control will not operate your  
VCR or DVD if those features are not already  
found on your unit.  
L UsingYour Remote WithYour TV  
After installing the batteries, press the TV/VCR  
on the remote to select the TV mode. (If you  
can change the channel of the TV by pressing  
CH UP (8) or DOWN (9) on the Remote  
Control, it is the TV mode.)  
All VCR buttons will operate whether the  
Remote Control is in TV or VCR modes.  
For detailed information on the use of the VCR  
or DVD, refer to the operation manual of the  
VCR or DVD.  
POWER  
CATV  
DVD  
TV  
VCR  
PLAY -  
Press to playback a tape or disc.  
REMOTE KEYPAD  
Use to enter two-digit code numbers  
when identifying your VCR.  
DISPLAY INPUT  
1
4
2
5
8
3
6
POWER (DVD/VCR)  
Press to turn the VCR or DVD on and  
off.  
ENTER  
7
9
FLASHBACK  
ENTER  
0
100  
D
VCR CHANNEL UP (8)/DOWN (9)  
Press to scan up or down through  
channels on the VCR.  
PERSONAL PREFERENCE  
REWIND 3  
A
B
C
CH  
8
Press to rewind a tape or reverse a  
disc. For some VCRs or DVDs you  
may need to press STOP first, then  
REWIND.  
VOL  
VOL  
+
;
:
9
CH  
DVD SKIP  
Press to jump forward to the beginning  
of the next chapter/track, or backward  
to the beginning of the current chapter/  
track, and automatically start to play  
that chapter/track.  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
PLAY  
:
REC  
STOP L  
Press to stop the tape or disc.  
REW  
(
FWD  
)
L
STOP  
PAUSE  
J
PAUSE J  
FF 2  
Press to temporarily stop the tape or  
disc during playback or recording (VCR  
only).  
Press to rapidly advance the tape or  
disc. For some VCRs or DVDs, you  
may need to press STOP first, then  
FF.  
TV CATV VCR DVD  
Press again to release Pause.  
47  
20F630[46-50].p65  
47  
25/3/03, 3:04 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Operation of Remote Control (Continued)  
POWER  
CATV  
DVD  
TV  
TV POWER  
CATV/DVD-TV/VCR  
DISPLAY  
VCR  
DISPLAY INPUT  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
VOL  
VOL  
+
;
:
9
CH  
CHANNEL UP (,)/  
DOWN(9)  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
PLAY  
POWER  
(DVD/VCR)  
:
REC  
REW  
(
FWD  
)
L
STOP  
PAUSE  
J
TV CATV VCR DVD  
Some brands have more than one remote code  
listed, due to changes in the remote codes from  
early to later model years, or due to format  
differences (VHS/BETA). In such cases, you  
may have to try more than one code to find the  
code your VCR accepts.  
L HOWTO IDENTIFY A VCR  
The remote control may already be set to  
operate your VCR. Try this initial check before  
going on to the following identifysection.  
(1) Press TV/VCR button.  
(2) Point remote towards VCR and press POWER  
Note:  
(DVD/VCR).  
Depending on the model, year produced, brand,  
and type of VCR, some models may not be  
compatible with the remote control.  
(3) Does the remote turn the VCR ON and OFF?  
If yes, the remote is ready to operate the VCR  
and no further steps are needed.  
If no, continue to the identifysection.  
L To IdentifyYour VCR Search Method.  
(1) Press TV/VCR button.  
L To IdentifyYourVCR Direct Entry Method.  
Use the following steps and list to quickly find  
the remote control code for your accessory  
VCR.  
(2) Press POWER on the VCR to ON.  
(3) Stand at least six feet away from the front of  
the VCR.  
First look up your VCRs remote control code  
number before going through the direct code  
entry steps control.  
If this procedure does not identify your  
accessory VCR, use the Search method of  
identification (described in the next section).  
Point the remote towards the VCR.  
Hold down DISPLAY and CH UP (8) at the  
same time. KEEP HOLDING THE BUTTONS  
DOWN.  
(4) Watch the Channel Number indicator on the  
VCR, Channel numbers will scan up when the  
VCR has been identified.  
(1) Press TV/VCR button.  
Release DISPLAY and CH UP (8) as soon as  
the channel numbers start to scan up.  
The VCRs remote control code number has  
been identified, and the remote is ready to  
operate the VCR.  
(2) Press and hold down DISPLAY and CH DOWN  
(9) on your remote control.  
Then release both buttons.  
(3) Within ten seconds after releasing DISPLAY  
and CH DOWN (9), enter yourVCRs two-digit  
remote control code number using the  
REMOTE KEYPAD (refer to list).  
The remote control is now ready to send  
commands to your VCR.  
48  
20F630[46-50].p65  
48  
25/3/03, 3:04 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Operation of Remote Control (Continued)  
REMOTE CONTROL  
CODE NUMBER  
POWER  
CATV  
DVD  
TV  
VCR BRAND  
TV  
CATV/DVD-  
TV/VCR  
VCR  
POWER  
Akai  
25, 26, 37  
15, 22, 30  
32  
04  
34  
10, 31  
04  
34  
15, 22, 30  
29  
21, 32, 35  
09, 10, 11  
28, 29  
04  
DISPLAY INPUT  
Audio Dynamics  
Broksonic  
Canon  
Capehart  
Craig  
Curtis Mathis  
Daewoo  
DBX  
Dynatech  
Emerson  
Fisher  
DISPLAY  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
A
B
C
CH  
8
VOL  
VOL  
+
;
:
9
CH  
CHANNEL  
UP (,)/  
DOWN(9)  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
Funai  
PLAY  
:
REC  
GE  
REW  
(
FWD  
)
L
STOP  
Goldstar  
Hitachi  
24  
06  
PAUSE  
J
Instant Replay  
JC Penney  
JVC  
Kenwood  
Lloyds  
04  
04, 06, 24, 30  
15, 41, 42  
14, 15  
29  
TV CATV VCR DVD  
Magnavox  
Magnin  
04, 05, 08  
31  
Marantz  
Memorex  
Minolta  
Mitsubishi  
Montgomery Ward  
Multitech  
NEC  
Panasonic  
Pentax  
Philco  
Philips  
Quasar  
RCA  
Realistic  
Samsung  
Sanyo  
Scott  
Sears  
30  
TIPS ON IDENTIFYINGYOUR VCR:  
04, 10, 24, 29  
06  
17, 18, 39, 40  
02, 43  
29  
15, 22, 30  
04, 44  
05, 06  
04, 05  
04, 05, 08  
04  
06, 07, 33  
01, 02, 10, 24  
23, 31  
14, 10  
20  
06, 11, 24  
01, 02, 03  
36  
12, 13, 38  
29  
04, 05, 08  
29  
15  
If your VCR model does not have the CHANNEL  
UP function on its remote control, it cannot be  
identified using the SEARCH method for  
identifying. For such models, please try the  
DIRECT ENTRY method of identifying.  
Be Patient: a minute or two can seem a lot longer  
when youre waiting for something to happen, but  
the code should be identified within 2 minutes.  
Remember, it is only a one-time set-up.  
Be careful not to let the VCR scan more than five  
channels when the indicator starts to move up. If  
you continue holding down the DISPLAY and CH  
UP (8) after five channel scans, the proper remote  
code can be passed up, and the two minutes  
identify cycle will have to be repeated.  
If a channel change does not occur on the VCR  
within two minutes, read the identifying instructions  
again and repeat the steps. Should a channel  
change still not occur the remote will not operate  
with the desired VCR.  
Sharp  
Shintom  
Sony  
Sound Design  
Sylvania  
Symphonic  
Tatung  
Teac  
15, 29  
27, 29  
29  
Teknika  
Thomas  
TMK  
21  
Toshiba  
Video Concepts  
Yamaha  
Zenith  
19, 20  
30  
15, 29, 30  
16  
49  
20F630[46-50].p65  
49  
25/3/03, 3:04 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Operation of Remote Control (Continued)  
POWER  
CATV  
DVD  
TV  
TV POWER  
CATV/DVD-TV/VCR  
VCR  
INPUT  
DISPLAY INPUT  
DISPLAY  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
VOL  
VOL  
+
;
:
9
CH  
CHANNEL UP (,)/  
DOWN(9)  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
PLAY  
:
POWER  
REC  
(DVD/VCR)  
REW  
(
FWD  
)
L
STOP  
PAUSE  
J
TV CATV VCR DVD  
L HOWTO IDENTIFY A DVD  
REMOTE CONTROL  
CODE NUMBER  
DVD BRAND  
The remote control may already be set to  
operate your DVD. Try this initial check before  
going on to the following identifysection.  
Denon  
JVC  
02  
09  
04  
04  
06  
02  
04  
08  
03  
03  
07  
01, 10  
05  
04  
02  
04  
Magnavox  
Marantz  
Mitsubishi  
Panasonic  
Philips  
Pioneer  
Proscan  
RCA  
Samsung  
Sharp  
Sony  
Toshiba  
Yamaha  
Zenith  
(1) Press CATV/DVD button.  
(2) Point remote towards DVD and press POWER  
(DVD/VCR).  
(3) Does the remote turn the DVD ON and OFF?  
If yes, the remote is ready to operate the DVD  
and no further steps are needed.  
If no, continue to the identifysection.  
L To identify your DVD Direct Entry Method.  
Use the following steps and list to quickly find  
the remote control code for your accessory  
DVD.  
First look up your DVDs remote control code  
number before going through the direct code  
entry steps control.  
Note:  
Depending on the model, year produced, brand,  
and type of DVD, some models may not be  
compatible with the remote control.  
(1) Press CATV/DVD button.  
(2) Press and hold down INPUT and CH DOWN  
(9) on your remote control.  
Then release both buttons.  
(3) Within ten seconds after releasing INPUT and  
CH DOWN (9) , enter your DVDs two-digit  
remote control code number using REMOTE  
KEYPAD (refer to list).  
The remote control is now ready to send  
commands to your DVD.  
50  
20F630[46-50].p65  
50  
25/3/03, 3:04 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Operation of Remote Control (Continued)  
L HOW TO IDENTIFY A CABLE CONVERTER  
CATV CONVERTER REMOTE CONTROL  
BRAND CODE NUMBER  
L To Identify Your Cable Converter –Direct  
Entry Method.  
Anvision  
07, 08  
Use the following steps and list to quickly find  
the remote control code for your cable TV  
converter.  
• First look up your converter’s remote code  
number before going through the direct code  
entry steps below.  
• If this procedure does not identify your  
converter, use the Search method for  
identification.  
Cable Star  
07, 08  
Eagle  
08  
General Instrument  
04, 05, 15, 23, 24, 25,  
30, 36  
Jerrold  
04, 05, 15, 23, 24, 25,  
30, 36  
Magnavox  
07, 08, 19, 25, 28, 29,  
32, 33, 40, 41  
18  
Oak Sigma  
Panasonic  
Philips  
27, 39  
07, 08, 19, 26, 28, 29,  
32, 33, 40, 41  
18, 20  
(1)Press CATV/DVD button.  
Pioneer  
(2)Press and hold down DISPLAY and CH DOWN  
Randtek  
RCA  
07, 08  
27, 43  
(9) on your remote control.  
Scientific Atlanta  
Sony  
Viewstar  
03, 22, 42  
44  
07, 08, 19, 26, 28, 29,  
32, 33, 40, 41  
14  
Then release both buttons.  
(3)Within ten seconds after releasing DISPLAY  
and CH DOWN (9), enter your converter’s two-  
digit code number using REMOTE KEYPAD  
(refer to list).  
Zenith  
• The remote control is now ready to send  
commands to your converter.  
• Some brands have more than one remote code  
listed due to changes in the remote codes from  
early to later model years. In such cases, you  
may have to try more than one code to find the  
code your converter accepts.  
TIPS ON IDENTIFYING YOUR CABLE  
CONVERTER:  
Be Patient: a minute or two can seem a lot  
longer when you’re waiting for something to  
happen, but the code should be identified within  
2 minutes.Remember, it is only a one-time set-  
up.  
Be careful not to let the CATV converter scan  
more than five channels when the indicator  
starts to move up.If you continue holding down  
the DISPLAY and CH UP (8) after five channel  
scans, the proper remote code can be passed  
up, and the two minute identify cycle will have  
to be repeated.  
If a channel change does not occur on the cable  
converter within two minutes, read the  
identifying instructions again and repeat the  
steps. Should a channel change still not occur,  
the remote will not operate with the desired  
converter.  
Note:  
Depending on the model, year produced, brand,  
and type of CATV converter, some models may  
not be compatible with the remote control.  
L To Identify Your Cable Converter Search  
Method.  
(1)Press CATV/DVD button.  
(2)Press the POWER button on the cable  
converter to ON.  
(3)Stand at least six feet away from the converter.  
Point the remote towards the converter.  
Hold down the DISPLAY and CH UP (8) at the  
same time. KEEP HOLDING THE BUTTONS  
DOWN.  
Note:  
(4)Watch the Channel Number indicator on the  
converter.  
Some satellite receivers can be operated by the  
REMOTE CONTROL. If you have a Satellite  
Receiver, you can use the above method to  
search for available channels.  
Channel numbers will scan up when the  
converter has been identified.  
Release the DISPLAY and CH UP (8) as soon  
as the channel numbers start to scan up.  
The converter’s remote control code number  
has been identified, and the remote is ready to  
operate the converter.  
51  
20F630[51-56].p65  
51  
25/3/03, 3:07 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Before Calling for Service  
Check these items and see if you can correct the trouble with a slight adjustment of the controls.  
QUICK SERVICE  
CHECK LIST  
POSSIBLE REMEDY  
Try a new channel, if OK, then  
X
X
X
X
X
X
X
X
X
X
X
X
X
there is possible station trouble.  
Is TV plugged in? Power at outlet?  
Is TV’s POWER button on?  
X
X
X
X
X
Is antenna connected to terminal  
on the back of the set?  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
If outside antenna is being used,  
check for broken wire.  
X
X
X
X
X
X
Check for local interference or  
external electrical noise.  
X
X
X
Turn off with POWER button and  
then turn it on after about a minute.  
X
X
X
X
Adjust COLOR control.  
Adjust PICTURE control.  
X
X
X
X
Check external Video/Audio  
products: look for loose/broken  
connection leads.  
X
(Refer to page 44 ~ 45)  
Check batteries of Remote Control.  
X
X
Press TV/VCR button on the  
remote to select TV mode.  
Are audio cables connected firmly?  
Check the volume level.  
X
X
Is SPEAKER ON? See page 22 ~ 23.  
Change CLOSED CAPTION mode  
to “OFF” / ENERGY SAVE mode to  
“OFF”.  
X
X
Unplug the TV and plug it in again  
after two minutes or longer.  
X
X
X
X
X
X
X
X
X
X
Note:  
• When viewing in TEXT mode, if no TEXT broadcast is being received,  
the screen may become dark and blank. Should this occur, set the  
CLOSED CAPTION mode to “OFF”.  
(Dark and Blank Picture)  
Calling for Service  
For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,  
or customer assistance, please call 1-800-BE-SHARP.  
52  
20F630[51-56].p65  
52  
25/3/03, 3:07 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
(ESPAÑOL)  
Antes de llamar al servicio de reparaciones  
Verifique estos puntos para ver si usted mismo puede solucionar el problema.  
LISTA DE  
COMPROBACIONES  
DE SERVICIO  
RAPIDO  
POSIBLE SOLUCIÓN  
Pruebe con otro canal y si todo está bien,  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
el problema puede ser de la emisora.  
Está conectado el televisor?  
Llega electricidad al tomacorrientes?  
X
X
X
X
X
X
Está conectado el interruptor POWER  
del televisor?  
Está conectado la antena al terminal del  
panel posterior del televisor?  
X
X
X
X
Si utiliza una antena exterior, cerciórese  
de que el cable no esté dañado.  
X
X
X
X
X
X
X
X
X
X
X
X
X
Compruebe si hay interferencia local.  
X
X
X
Desconecte el interruptor POWER y  
vuelva a conectarlo después de transcurrir  
un minuto.  
X
X
X
X
Ajuste el control de COLOR.  
Ajuste el control de MATIZ.  
X
X
X
X
Verifique los productos externos de Video/  
Audio, revise si hay conexiones sueltas  
o rotas.  
X
(Ver pág. 44 ~ 45)  
Compruebe el estado de las pilas del  
mando a distancia.  
X
X
Deslice CATV/DVD-TV/VCR selector  
para situarlo sobre la posición TV.  
Están bien conectados los cables de  
X
X
sonido? Compruebe el nivel del volumen.  
Está conectado el altavoz?  
Ver pág. 22 ~ 23.  
Desactive (OFF) el modo CLOSED  
CAPTION / Desactive (OFF) el modo  
AHORRO DE ENERGÍA (Energy Save).  
X
Desenchufe el televisor y vuelva a  
enchufarlo despúes de dos minutos o más.  
X
X
X
X
X
X
X
X
X
X
X
Nota:  
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la  
pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga el  
modo CLOSED CAPTION en OFF.  
(Imagen oscura y en blanco)  
Solicitud de servicio técnico  
Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de  
información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.  
53  
20F630[51-56].p65  
53  
25/3/03, 3:07 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
(FRANÇAIS)  
Avant dappeler un réparateur  
Vérifier les points suivants afin de déterminer s’il est possible de remédier au problème par un simple réglage des commandes.  
LISTE DES  
VÉRIFICATIONS  
POUR UN  
DÉPANNAGE  
RAPIDE  
SOLUTION POSSIBLE  
Essayer un nouveau canal. S’il fonctionne,  
il s’agit probablement d’une panne de la  
chaîne.  
X
X
X
X
X
X
X
X
X
X
X
X
X
Le téléviseur est-il branché?  
La prise secteur fonctionne-t-elle?  
X
X
X
X
X
X
X
Linterrupteur POWER du téléviseur est-il  
sous tension?  
Lantenne est-elle raccordée aux bornes  
à l’arrière de l’appareil?  
X
X
X
X
X
X
X
X
X
X
X
X
X
Si l’antenne extérieure est utilisée,  
s’assurer qu’il n’y a pas de fils sectionnés.  
X
X
X
X
X
X
Vérifier s’il n’y a pas d’interférence locale  
ou de bruit électrique extérieur.  
X
X
X
Mettre l’interrupteur POWER hors tension  
puis de nouveau sous tension au  
bout d’une minute.  
X
X
X
X
Régler la commande de COULEUR.  
Régler la commande de CONTRASTE.  
X
X
X
X
Vérifier l’appareil vidéo/audio externe:  
s’assurer que les câbles de connexion  
ne sont pas desserrés ou cassés.  
(Se reporter à la page 44 ~ 45)  
X
Vérifier les piles de la télécommande.  
X
X
Appuyez sur la touche TV/VCR de la  
télécommande pour sélectionner le mode TV.  
Les câbles audio sont-ils fermement  
X
X
connectés? Vérifier le niveau du volume.  
Les haut-parleurs fonctionnent-ils?  
Voir pages 22 ~ 23.  
Mettre le mode sous-titrage hors service  
“ARRÊT” / Mode d’économie d’énergie  
sur “ARRÊT”.  
X
X
Débrancher le téléviseur et le rebrancher  
après deux minutes.  
X
X
X
X
X
X
X
X
X
X
Remarque:  
• En mode TEXTE, s’il n’y a pas d’émission TEXTE à recevoir, l’écran  
du téléviseur pourrait être sombre et vide.Dans ce cas, placer le mode  
Sous-titrage hors service.  
(Image sombre et vide)  
Appel au service après-vente  
Pour connaître l’emplacement du centre de service après-vente agrée Sharp le plus proche ou pour obtenir de la documentation  
sur les produits, des accessoires, des consommables ou une aide au consommateur, appelez le 1-800-BE-SHARP.  
54  
20F630[51-56].p65  
54  
25/3/03, 3:07 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Specifications  
MODEL  
20F630  
NTSC  
Receiving System  
Stereo Broadcast  
Reception Channels  
AIR  
MTS/SAP  
VHF  
2-13 ch  
UHF 14-69 ch  
1-125 ch  
CATV  
Channel Tuning  
Antenna Input Impedance  
181-channel Reception PLL tuning system  
VHF/UHF 75 ohm Unbalanced  
Screen Size  
(Visible Area)  
21˝ Diagonally Measured  
(50.8 cm)  
Terminals  
Audio/Video input × 2 (Front x 1, Rear x 1),  
COMPONENT-IN × 1 (Rear), Audio Output × 1 (Rear)  
Sound Output  
2.5 W (RMS) × 2  
AC 120 V, 60 Hz  
90 W  
Power Source  
Power Consumption  
Dimensions  
(W) x (H) x (D)  
2325/64˝ × 181/2˝ × 193/32˝  
[594 mm × 470 mm × 485 mm]  
Weight (approx.)  
56.22 lbs. (25.5 kg)  
• Design and specifications are subject to change without notice.  
55  
20F630[51-56].p65  
55  
25/3/03, 3:07 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimension: 140mm x 215mm  
Limited Warranty  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp  
brand product (the “Product”), when shipped in its original container, will be free from defective  
workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the  
defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser  
for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded  
item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which  
has been subjected to improper voltage or other misuse, abnormal service or handling, or which has  
been altered or modified in design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth  
below and provide proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to  
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE  
OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied  
warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties  
other than those described herein, or to extend the duration of any warranties beyond the time period  
described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be  
the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the  
period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of  
Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,  
whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable or in  
any way responsible, for any damages or defects in the Product which were caused by repairs or attempted  
repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way  
responsible for any incidental or consequential economic or property damage. Some states do not allow  
the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.YOU MAY ALSO HAVE OTHER RIGHTS  
WHICH VARY FROM STATE TO STATE.  
Model Specific Section  
Your Product Model Number & Description:  
20F630, 20 inch Color Television  
(Be sure to have this information available when  
you need service for your Product.)  
Warranty Period for this Product:  
One (1) year parts and 90 days labor.The warranty  
period continues for an additional one (1) year, for  
a total of two (2) years, with respect to the picture  
tube(s) in the Product for parts only. Labor and  
service are not provided free of charge for this  
additional period.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
Where to Obtain Service:  
Non-rechargeable batteries.  
From a Sharp Authorized Servicer located in the  
United States. To find the location of the nearest  
Sharp Authorized Servicer, call Sharp toll free at  
1-800-BE-SHARP.  
What to Do to Obtain Service:  
Contact your Sharp Authorized Servicer to obtain  
in-home service for this Product. The Servicer will  
come to your home and if it is necessary to remove  
the Product, the Servicer will reinstall it. Be sure to  
have Proof of Purchase available.  
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharp-usa.com  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
Printed in Mexico  
TINS-A725WJZZ  
03P05-MMP  
20F630[51-56].p65  
56  
25/3/03, 3:07 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Air Cleaner KC 830U User Manual
Sharp All in One Printer MX M1100 User Manual
Shure Microphone BETA 52 User Manual
Sonic Alert Clock SBP100 User Manual
Sony Battery Charger AC VQV10 User Manual
Sony MP3 Player CFD E55 User Manual
Spirit Home Gym ZE501 User Manual
Sunbeam Blender PB2000 User Manual
Sylvania TV DVD Combo LD320SS8 User Manual
TANDBERG Switch RJ45RJ11 User Manual