LC-13E1M
LC-15E1M
LC-20E1M
LCD COLOUR TELEVISION
OPERATION MANUAL
Printed in Japan
Printed on post-consumer recycled paper.
TINS-A280WJZZ
02P09-JKM
Download from Www.Somanuals.com. All Manuals Search And Download.
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp LCD Colour TV product. To ensure safety
and many years of trouble-free operation of your product, please read the Important
Safety Precautions carefully before using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and
property damage if improperly handled. This product has been engineered and manufactured with the
highest priority on safety. However, improper use can result in electric shock and/or fire. In order to
prevent potential danger, please observe the following instructions when installing, operating and
cleaning the product. To ensure your safety and prolong the service life of your LCD colour TV
product, please read the following precautions carefully before using the product.
I Read instructions—All operating instructions must be read and understood before the product is
operated.
I Keep this manual in a safe place—These safety and operating instructions must be kept in a safe
place for future reference.
I Observe warnings—All warnings on the product and in the instructions must be observed closely.
I Follow instructions—All operating instructions must be followed.
I Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate
attachments can result in accidents.
I Power source—This product must operate on a power source specified on the specification label. If
you are not sure of the type of power supply used in your home, consult your dealer or local power
company. For units designed to operate on batteries or another power source, refer to the
operating instructions.
I Power cord protection—The power cords must be routed properly to prevent people from stepping
on them or objects from resting on them. Check the cords at the plugs and product.
I If you plan to use a DC power supply unit other than the AC adapter supplied with the product,
make sure the power supply unit provides stable voltage with minimum fluctuations. Unstable
power supply can cause problems in the product.
I Overloading—Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
I Entering of objects and liquids—Never insert an object into the product through vents or openings.
High voltage flows in the product, and inserting an object can cause electric shock and/or short
internal parts. For the same reason, do not spill water or liquid on the product.
I Servicing—Do not attempt to service the product yourself. Removing covers can expose you to
high voltage and other dangerous conditions. Request a qualified service person to perform
servicing.
I Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and
request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper
adjustment of controls not described in the instructions can cause damage, which often re-
quires extensive adjustment work by a qualified technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product
indicates that the product needs servicing.
I Replacement parts—In case the product needs replacement parts, make sure that the service
person uses replacement parts specified by the manufacturer, or those with the same characteris-
tics and performance as the original parts. Use of unauthorized parts can result in fire, electric
shock and/or other danger.
I Safety checks—Upon completion of service or repair work, request the service technician to
perform safety checks to ensure that the product is in proper operating condition.
I Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
IMPORTANT SAFETY PRECAUTIONS (Continued)
I Cleaning—Unplug the power cord from the AC outlet before
cleaning the product. Use a damp cloth to clean the product. Do
not use liquid cleaners or aerosol cleaners.
I Water and moisture—Do not use the product near water, such as
bathtub, washbasin, kitchen sink and laundry tub, swimming pool
and in a wet basement.
I Stand—Do not place the product on an unstable cart, stand,
tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal injuries as
well as damage to the product. Use only a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to
follow the manufacturer’s instructions. Use only the mounting
hardware recommended by the manufacturer.
I When relocating the product placed on a cart, it must be moved
with utmost care. Sudden stops, excessive force and uneven
floor surface can cause the product to fall from the cart.
I Ventilation—The vents and other openings in the cabinet are
designed for ventilation. Do not cover or block these vents and
openings since insufficient ventilation can cause overheating and/
or shorten the life of the product. Do not place the product on a
bed, sofa, rug or other similar surface, since they can block
ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such
as a bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
I The LCD panel used in this product is made of glass. Therefore,
it can break when the product is dropped or applied with impact.
Be careful not to be injured by broken glass pieces in case the
LCD panel breaks.
I Heat sources—Keep the product away from heat sources such
as radiators, heaters, stoves and other heat-generating products
(including amplifiers).
I The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine
picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or
red.
Please note that this does not affect the performance of your product.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
SUPPLIED ACCESSORIES
Make sure the following accessories are provided with the product.
Wireless Remote Control (×1)
“AAA” size (UM/SUM-4) Dry Battery (×2)
AC Cord (×1)
Antenna Cable (×1)
*Product shape varies in some countries.
AC Adapter (×1)
Operation Manual (×1)
Cable Clamp (×1)
LC-13E1M
LC-15E1M
LC-20E1M
LCD COLOUR TELEVISION
OPERATION MANUAL
Printed in Japan
Printed on post-consumer recycled paper.
UADP-0212CEZZ
TINS-A280WJZZ
02P09-JKM
Download from Www.Somanuals.com. All Manuals Search And Download.
4
PREPARATION
Preparing and Using the Remote Control
I Use the remote control by pointing it towards the remote sensor window.
Objects between the remote control and sensor window may prevent proper
operation.
POWER SLEEP
SLEEP indicator
Power/Standby indicator
Remote sensor window
Cautions regarding use of remote control
I Do not expose the remote control to shock.
In addition, do not expose the remote control to liquids, and do not place in
an area with high humidity.
I Do not install or place the remote control under direct sunlight.
The heat may cause deformation of the unit.
I The remote control may not work properly if the remote sensor window of the
main unit is under direct sunlight or strong lighting. In such case, change the
angle of the lighting or LCD TV set, or operate the remote control closer to
the remote sensor window.
Batteries for Remote Control
Before using the LCD TV set for the first time, install two (“AAA” size, UM/SUM-4) batteries (supplied).
When the batteries become depleted and the remote control fails to operate, replace the batteries with
new (“AAA” size, UM/SUM-4) batteries.
1 Open the battery
2 Insert two (“AAA” size,
3 Close the battery
cover.
UM/SUM-4) batteries.
cover.
I Slide the cover while
pressing the ( ) part.
[
I Position the positive and
negative ends of the
batteries as indicated in the
compartment.
I Engage the claw on the
cover into the battery
housing and slide shut.
–
Caution!
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak chemicals.
• Remove batteries as soon as they are non-operable.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control is not used for an extended period of time, remove batteries from the remote
control.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
PREPARATION (Continued)
Power Connection
AN
T.
DC input terminal
DC 12V (LC-13E1M/
LC-15E1M)
P
O
W
E
R
IN
PU
T
D
C
13V
DC 13V (LC-20E1M)
O
E
ID
V
1
N
-I
V
A
L
IO
D
U
A
R
O
E
ID
-V
S
D
A
E
H
E
N
O
H
P
Plug into AC
outlet.
O
E
ID
V
T.
N
A
T
U
/O
2
-IN
AV
L
IO
D
U
A
R
T
EN
N
PO
M
O
C
Y
Household
power outlet
PB
PR
L
IO
D
U
A
R
AC cord*
AC adapter
* Product shape varies in some countries.
Note:
•
•
•
Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
Always turn the main power switch of the LCD TV set to OFF when connecting the AC adapter.
Always unplug the AC adapter from the product and power outlet when not using for long periods of time.
Antenna Connection
• Using the supplied antenna cable, connect the room
antenna terminal to the antenna input terminal on the
TV set. (Refer to the figure below.)
E
A
D
P
H
O
N
E
Antenna terminal
A
N
T
.
P
O
W
E
R
IN
P
U
T
O
E
D
V
ID
C
1
1
3
N
-I
AV
V
L
IO
D
U
A
R
O
E
ID
-V
S
D
A
E
H
E
N
O
H
P
O
E
ID
V
T
U
O
2/
-IN
AV
L
IO
D
R
E
U
A
P
T
P
IN
12
R
V
C
D
COMPONENT
Y
PB
PR
L
IO
D
U
A
R
Room antenna terminal
(75-ohm type)
Antenna cable (supplied)
To antenna input terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
6
LOCATION OF USERS CONTROL
Main unit (front view)
Upper control panel
MENU TV/VIDEO MAIN POWER
VOL
CH
LC-20E1M
2
1
PRESET
VOL (
-)/(+)
MENU
MAIN POWER
CH( )/( )
TV/VIDEO
2
1
PRESET
LC-13E1M
LC-15E1M
MENU TV/VIDEO
MAIN POWER
VOL
CH
The screen can be
adjusted backwards to an
angle between 12 de-
grees and 35 degrees.
The screen cannot be set
up straight. When
changing the angle, make
sure to hold the stand and
adjust the screen to the
best viewable angle.
Adjustable range
P
O
W
E
R
SLEEP
Speaker
Remote sensor window
SLEEP indicator
The SLEEP indicator lights up red when the SLEEP
TIMER is set to on.
Power/Standby indicator
A green indicator lights when the power is on and a red
indicator lights when in the standby mode (the indicator
will not light when the main power is off).
* The examples used throughout this manual are based on the LC-20E1M
model. There may be a slight difference in the illustrations, if you are
using the LC-13E1M and LC-15E1M models.
Note:
•
TV/VIDEO, CH ( )/( ), and VOL (–)/(+) on the main unit have the same functions as the same buttons on the remote
control. Fundamentally, this operation manual provides a description based on operation with the remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
LOCATION OF USERS CONTROL (Continued)
Main unit (rear view)
VIDEO
O
E
ID
V
T
U
/O
2
-IN
V
A
AUDIO (L)
AUDIO (R)
Y
AV-IN2/OUT
L
IO
D
AU
R
T
N
E
N
O
P
M
O
C
Y
P
P
B
B
P
P
R
COMPONENT
R
AUDIO (L)
AUDIO (R)
L
IO
D
U
A
R
Carrying handle
O
E
ID
V
1
N
-I
V
A
L
IO
D
U
A
R
O
E
ID
-V
S
D
A
E
H
E
N
O
H
P
O
E
ID
V
.
T
N
A
T
U
/O
2
N
-I
AV
L
IO
D
U
R
E
A
W
O
P
T
U
P
IN
R
V
3
1
C
D
T
N
E
N
O
P
M
O
C
Y
B
P
R
P
L
IO
D
U
A
R
VIDEO
VID
EO
AV-IN
1
AUDIO (L)
L
AV-IN1
A
UD
R
IO
AUDIO (R)
S-VIDEO
S-VID
EO
HEADPHONE
H
EAD
PH
O
N
E
Antenna terminal
AN
T.
PO
IN
C
W
ER
PU
T
POWER INPUT
DC 12V(LC-13E1M/
LC-15E1M)
D
13V
DC 13V(LC-20E1M)
Download from Www.Somanuals.com. All Manuals Search And Download.
8
LOCATION OF USERS CONTROL (Continued)
Removing the Back Cover
I Before connecting a connection cord into the rear terminal, remove the
back cover. Push in the tab and pull out the back cover carefully.
I To mount the cover, insert the 2 hooks on the bottom of the cover
into the cabinet and press on the upper part of the back cover until
the tab locks in place with a click.
Listening with Headphones
I Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set.
ꢀ On-screen display
< Rear terminal
O
E
ID
V
1
-IN
AV
L
IO
D
AU
R
O
E
ID
-V
S
D
A
E
H
E
N
O
H
P
T
.
N
A
R
E
W
O
P
T
U
P
IN
V
13
C
D
VOLUME
60
Headphones
Note:
• Headphones are not included in the supplied accessories.
• No sound will be heard from the main unit speakers when a headphone mini-plug is connected into the
HEADPHONE jack.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
LOCATION OF USERS CONTROL (Continued)
Remote control
DISPLAY
Press....Displays receiving channel for 10 seconds.
Channel indication reduces in size after
about 10 seconds.
Press again...Removes display.
POWER
POWER
(P.12)
DISPLAY
SLEEP
(P.19)
MENU (P.14)
SLEEP
BRIGHT
BRIGHT (P.24)
MENU cursor
(Upward/Downward Selection)
(P.14)
The brightness can be
switched between 3 levels.
MENU
MENU cursor
(Right/Left Selection) (P.14)
MUTE (P.12)
Press....Stops sound.
Press again...Returns
sound to previous level.
TV
LANGUAGE DIS.MODE VIDEO
TV
VIDEO (P.11)
DIS.MODE (P.25)
LANGUAGE (P.15)
VOL
CH
FLASHBACK
Returns to previous channel.
VOL (+)/(–) (P.12)
CH ( )/( ) (P.13)
Selects next higher channel.
Selects next lower channel.
CHANNEL SELECT (P.13)
MPX
-/--
MPX (P.26)
Switches Audio mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
BASIC OPERATION
Turning on POWER
Control section of main unit
MAIN POWER
ꢀ On-Screen Display
1 Press MAIN POWER, located on
the upper part of the main unit to
ON.
MENU TV/VIDEO
MAIN POWER
VOL
CH
2
PRESET
1
2 The POWER/STANDBY indicator
instantaneously changes from red
to green and the main unit is turned
on.
Note:
•
Input mode indication disappears after
several seconds.
Power/Standby indicator
Switching TV/VIDEO AV1/AV2/COMPONENT/TV Mode
AV1 mode
1 Turn on the power of the con-
nected video equipment.
2 Press TV
VIDEO and select the
applicable input source. The screen
displays AV1, AV2, COMPONENT
or TV mode at the upper right
corner each time TV
VIDEO is
POWER
SLEEP
pressed.
AV2 mode
DISPLAY
MENU
BRIGHT
Note:
•
AV input mode indication remains for
five seconds.
AV1: Video equipment connected to the
AV1 input terminals.
TV
LANGUAGE DIS.MODE VIDEO
TV
VIDEO
•
VOL
CH
An S-video input terminal is
additionally provided for the AV1
input. If both S-video terminal and
normal video terminals are
connected with cables, the S-
video input terminal is selected as
the high priority.
COMPONENT
mode
COMPONENT
MPX
-/--
•
AV2: AV2 mode is used to adjust the
preset settings and IN or OUT can
be selected. AV2 indication is not
displayed when OUT is selected.
(For details on setting AV-OUT,
see page 23.)
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
TV mode
Download from Www.Somanuals.com. All Manuals Search And Download.
11
BASIC OPERATION (Continued)
Sound Volume
1 Press VOL (+) to increase sound
POWER
POWER
MUTE
volume. The segment of indicator
increases.
DISPLAY
SLEEP
BRIGHT
MENU
TV
LANGUAGE DIS.MODE VIDEO
2 Press VOL (–) to decrease sound
volume. The segment of indicator
decreases.
VOL
CH
VOL(+)/(–)
To mute sound
1 Press MUTE to temporarily turn off
MPX
-/--
the sound.
Screen displays the MUTE mark.
2 Press MUTE or VOL (+)/(–) to turn
the sound back to the previous level.
MUTE is automatically cleared when
the following buttons are pressed:
POWER, VOL (+)/(–), MUTE.
ON/OFF Standby
To turn off the LCD TV
POWER
POWER
Press POWER on the remote control.
The Power/Standby indicator will turn
red. (Standby position)
DISPLAY
SLEEP
BRIGHT
MENU
TV
LANGUAGE DIS.MODE VIDEO
To turn the LCD TV back on
VOL
CH
Press POWER again.
The Power/Standby indicator will turn
green.
MPX
-/--
Download from Www.Somanuals.com. All Manuals Search And Download.
12
BASIC OPERA TION ( Continued)
Changing the Channels
Changing channels using CHANNEL SELECT on the remote control.
• To handle the increasing number of channels available, this LCD TV set allows you to select up to
100 positions (Channels 0 to 99). One-digit and two-digit methods of selection can be used. Follow
the procedure shown below to select channels.
To select a one-digit channel
(e.g., Channel 5):
POWER
B/G
DISPLAY
1 Press the
button.
SLEEP
BRIGHT
MENU
2 If “5-” is indicated and the picture
-/--
does not change, press the
TV
LANGUAGE DIS.MODE VIDEO
button to switch over to the 1-digit
select mode and press
again.
VOL
CH
CH ( )/
(
)
CHANNEL
SELECT
MPX
-/--
To select a two-digit channel
(e.g., Channel 15):
-/--
1 Press the
button to set the
2-digit select mode.
2 Press the
3 Press the
button.
button.
Note:
B/G
• Complete this procedure within 4 seconds,
otherwise the selection will not be made.
Changing channels with CH ( )/( ) on the remote control.
Press CH ( ) and the channels change in the order shown below:
1 → 2 → 3 → . . . → 98 → 99 → 0 → 1 → 2 → 3 → . . .
Press CH ( ) and the channels change in the order shown below:
3 → 2 → 1 → 0 → 99 → 98 → . . . → 3 → 2 → 1 → . . .
Download from Www.Somanuals.com. All Manuals Search And Download.
13
SELECTING THE MENU ITEMS
Selecting a Menu Item
• This LCD TV set allows you to adjust the picture and sound, and set the channels and other features
using the On-Screen Display. Select the desired menu item by following the steps below and then refer
to the indicated page for details.
SLEEP TIMER
menu ----------------- Page 19
1 Press MENU to display the MENU
SLEEP TIMER
RETURN
POWER
screen.
SLEEP TIMER [---REMAIN]
</>
DISPLAY
SLEEP
BRIGHT
2 Press ]/[ to select the desired
menu item.
MENU
•
•
The “
The “
” mark moves up or down.
” mark indicates the selected
MENU
TV
LANGUAGE DIS.MODE VIDEO
MENU
SELECT:
ADJUST:
EXIT:
menu item.
]/[
VOL
CH
3 Press </> to enter.
PICTURE menu
(TV mode) ---------- Page 20
PICTURE (TV)
RETURN
MENU
SLEEP TIMER
PICTURE
CONTRAST
COLOUR
[
[
[
[
[
[
30
0
]
]
]
]
]
]
MPX
-/--
0
0
BLACK LEVEL
SHARPNESS
RED-BLUE
GREEN
0
0
FEATURE
0
0
0
0
CH-SETTING
0
0
RESET
MENU
SELECT:
ENTER:
EXIT:
MENU
SELECT:
ENTER:
EXIT:
(AV mode) --------- Page 20
PICTURE (AV1/AV2/COMPONENT)
RETURN
Note:
CONTRAST
TINT
[
[
[
[
[
[
[
30
0
]
]
]
00
• The TINT display only appears when
the COLOUR SYSTEM sets N358 or
N443 in the NTSC mode.
• The displayed items differ depending
on the setting conditions.
COLOUR
0
0
0]
0
0]
0
BLACK LEVEL
SHARPNESS
RED-BLUE
GREEN
0]
0
0]
0
COLOUR SYSTEM [AUTO]
RESET
• The selected item changes to yellow.
• Items in purple cannot be selected.
MENU
SELECT:
ENTER:
EXIT:
FEATURE menu --- Page 22
FEATURE
RETURN
BRIGHTNESS
[BRIGHT
]
]
]
]
]
AUTO POWER OFF [OFF
DISPLAY MODE
AV2 IN/OUT
BLUE BACK
LANGUAGE
[NORMAL
[IN
[ON
[ENGLISH]
MENU
SELECT:
ADJUST:
EXIT:
CH-SETTING
menu ---------------- Page 18
CH-SETTING
RETURN
POSITION
[CH15
]
]
]
]
COLOUR SYSTEM [AUTO
SOUND SYSTEM
SKIP
[B/G
[OFF
FINE
[783.25MHz]
NICAM
[ON
[ON
]
]
IGR
* The screen indications shown above are larger than actual for easy reading.
MENU
SELECT:
ADJUST:
EXIT:
Download from Www.Somanuals.com. All Manuals Search And Download.
14
PRESET
On-Screen Display Language Selection
Upper control panel
I MENU on the LCD TV set can also
be used to select the language.
VOL
CH
MENU TV/VIDEO
1 Press MENU on the upper part of
the LCD TV set for more than two
seconds to display the PRESET
mode screen.
2
ESET
1
3 1,2,4
2 Press MENU twice to display the
LANGUAGE select mode screen.
Press MENU again to change the
PRESET mode as shown below.
* In this example, the LC-20E1M
model is used. Refer to page 7
if you are using the LC-13E1M
and LC-15E1M models.
NORMAL
AUTO → MANUAL → LANGUAGE →
SCREEN
Note:
•
Instead of pressing MENU for more than
two seconds, you can display the
LANGUAGE select mode by selecting
ENGLISH
FEATURE
→
LANGUAGE on the
Menu screen.
3 Press CH ( )/( ) to select the
language you wish to display.
4 Press MENU to return to the
normal screen.
MENU
SELECT:
EXIT:
Adjusting the LANGUAGE Settings
Directly setting the LANGUAGE
1 Press LANGUAGE to display the
LANGUAGE screen.
POWER
SLEEP
2 Press LANGUAGE to change the
DISPLAY
setting.
BRIGHT
MENU
ENGLISH
TV
LANGUAGE DIS.MODE VIDEO
LANGUAGE [ENGLISH]
LANGUAGE
Note:
VOL
CH
• The LANGUAGE screen automatically
disappears in 3 seconds.
MPX
-/--
Download from Www.Somanuals.com. All Manuals Search And Download.
15
PRESET (Continued)
Presetting the Channels (AUTO)
Upper control panel
I Automatically tunes in and presets
receivable TV stations.
(Auto mode screen)
Sound System
VOL
CH
MENU TV/VIDEO
Make sure the antenna cable is
properly connected.
2
PRESET
1
1 Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than two seconds. The
2
1
AUTO mode screen appears.
2 Press VOL (–)/(+) (PRESET-2)
on the upper part of the LCD TV
set.
All the TV stations in your area
that can be received by the LCD
TV set are automatically preset.
POWER
SLEEP
DISPLAY
MENU
BRIGHT
3 The screen shows whatever is on
channel 1 when full auto channel
preset is finished.
MENU
TV
LANGUAGE DIS.MODE VIDEO
Note:
VOL
CH
•
When starting PRESET after setting the
SOUND SYSTEM with MENU of the
Remote Control, the SOUND SYSTEM
for all channels are stored into memory.
Unused channels are automatically
skipped.
The Preset mode is only available in the
TV mode and cannot be operated in the
AV mode.
•
•
MPX
-/--
Download from Www.Somanuals.com. All Manuals Search And Download.
16
PRESET (Continued)
Presetting the Channels (MANUAL)
I Setting a channel to a desired TV
station:
Upper control panel
Sound System
VOL
CH
MENU TV/VIDEO
1 Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than two seconds. The
2
ESET
1
AUTO mode screen appears.
2 Press MENU (PRESET-1) to
display the MANUAL mode screen.
Press MENU (PRESET-1) again
to change the MANUAL mode as
shown below.
4
3 1,2,6
POWER
SLEEP
NORMAL
DISPLAY
AUTO → MANUAL → LANGUAGE →
Auto mode screen
SCREEN
MENU
BRIGHT
3 Select the channel position using
MENU
CHANNEL SELECT or CH ( )/
(
).
TV
LANGUAGE DIS.MODE VIDEO
VOL(+)/(–)
4 Press VOL (+)/(–) to locate the
channel you want to preset to the
position. Search is initiated and
when a TV signal is received
during the search, the search
stops.
VOL
CH
CH ( )/(
)
CHANNEL
SELECT
MPX
-/--
5 Repeat steps 3 and 4 above, to
preset the channel positions for
other broadcasts, etc.
Manual mode screen
6 Press MENU (PRESET-1) to
return to the normal screen.
Note:
•
SYSTEM may not have been set correctly,
if noise can be heard or if there is no
sound.
In such case, reset to SOUND SYSTEM
using MENU.
Channel position
number
I In a weak reception area, or under
Upper control panel
bad reception conditions.
VOL
CH
MENU TV/VIDEO
1 Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than two seconds. The
2
PRESET
1
AUTO mode screen appears.
2 Press MENU (PRESET-1) to
4
1,2,3,5
display the MANUAL mode screen.
3 While the MANUAL mode screen
is displayed, press MENU for more
than 2 seconds.
The channel position number
remains in green.
Note:
• While the MANUAL mode screen is
displayed, press MENU.
(The LANGUAGE mode screen will
appear.)
ENGLISH
4 Adjust for good reception using
VOL (+)/(–).
5 After finishing the adjustment,
press MENU (PRESET-1) to
continue channel presetting.
MENU
SELECT:
EXIT:
Download from Www.Somanuals.com. All Manuals Search And Download.
17
PRESET (Continued)
Channel Setting
(MENU screen)
1 Press MENU to display the MENU
screen.
POWER
SLEEP
MENU
</>
SLEEP TIMER
PICTURE
2 Press ]/[ to move the cursor to
DISPLAY
FEATURE
CH-SETTING.
BRIGHT
CH-SETTING
MENU
3 Press </> to display
MENU
CH-SETTING screen.
TV
LANGUAGE DIS.MODE VIDEO
]/[
4 Press ]/[ to select the desired
MENU
SELECT:
ENTER:
EXIT:
VOL
CH
function mode.
5 Each time you press </>, the
setting for individual items is as
mentioned under Selected item:
CHANNEL
SELECT
(CH-SETTING screen)
MPX
-/--
CH-SETTING
RETURN
POSITION
[CH15
]
]
]
]
COLOUR SYSTEM [AUTO
6 Press MENU to return to the
SOUND SYSTEM
SKIP
[B/G
[OFF
normal screen.
FINE
[783.25MHz]
NICAM
[ON
[ON
]
]
IGR
MENU
SELECT:
ADJUST:
EXIT:
Selected item
POSITION
The channel position changes to the upper or lower number.
PAL
SECAM
N358
N443
AUTO
PAL-N
COLOUR SYSTEM
The mode changes in the following order:
PAL-M
I
D/K
M
B/G
SOUND SYSTEM
SKIP
The mode changes in the following order:
The mode changes in the following order:
ON ←→ OFF
Channel numbers with a “| (RED)” mark on the left are set to SKIP.
To turn off SKIP, press CHANNEL SELECT to select the desired channel,
and then set the SKIP mode on the CH-SETTING menu to “OFF”.
FINE
The frequency changes to allow fine tuning.
NICAM
The broadcast sound system changes in the following order:
ON (NICAM sound) ←→ OFF (Monaural TV sound)
Stereo system changes in the following order:
IGR
ON (IGR sound) ←→ OFF (Monaural TV sound)
Note:
• Switching COLOUR SYSTEM
Set the system to AUTO for normal TV reception. The AUTO mode automatically detects the receiving signal
system and changes the reception system of the LCD TV set. When the picture or sound is not stable, switching to
an appropriate system may improve the picture or sound quality.
• When using FINE tuning, the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel preset procedure. (Please see
page 17 “Presetting the Channels (MANUAL)” for details.)
• In AV mode, items in purple cannot be selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
ADJUSTMENT
Adjusting the SLEEP TIMER Setting
To use Direct Key function
POWER
SLEEP
</>
1 Press SLEEP to display the
SLEEP TIMER screen.
POWER
SLEEP
DISPLAY
2 Press SLEEP to set the sleep
BRIGHT
timer (in minutes).
•
Each time you press SLEEP, the
MENU
timer changes as follows:
MENU
TV
LANGUAGE DIS.MODE VIDEO
--- 30 60 90 120
]/[
- - - REMAIN
VOL
CH
The setting is turned off when --- is
displayed.
3 Press MENU to return to the main
MPX
-/--
screen.
6
0
REMAIN
To use MENU item
1 Press MENU to display the MENU
screen.
2 Press ]/[ to move the cursor to
MENU
SLEEP TIMER
PICTURE
SLEEP TIMER.
FEATURE
CH-SETTING
MENU
SELECT:
ENTER:
EXIT:
3 Press </> to display the SLEEP
TIMER screen.
SLEEP TIMER
RETURN
SLEEP TIMER [120
4 Press </> to set the sleep timer
0
REMAIN]
(in minutes).
The setting can be set in
increment of 30 minutes and in the
range between 30 and 120
minutes.
MENU
SELECT:
ADJUST:
EXIT:
The setting is turned off when --- is
displayed.
5 Press MENU to return to the main
screen.
Note:
• When you set the SLEEP TIMER, the SLEEP indicator lights.
• After you set the SLEEP TIMER, if you turn off the MAIN POWER on the TV set or press POWER on the remote
control, the SLEEP TIMER setting is cancelled and the SLEEP indicator goes out.
• 5 minutes before the SLEEP TIMER turns off the TV, 5 REMAIN is displayed on the screen for 4 seconds. The
SLEEP TIMER counts down and shows a similar 4-second display for each remaining minute until the timer turns
off the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
ADJUSTMENT (Continued)
Adjusting the PICTURE Settings
1 Press MENU to display the MENU
MENU
SLEEP TIMER
PICTURE
screen.
POWER
SLEEP
FEATURE
</>
CH-SETTING
DISPLAY
BRIGHT
MENU
MENU
TV
LANGUAGE DIS.MODE VIDEO
MENU
SELECT:
ENTER:
EXIT:
]/[
2 Press ]/[ to move the cursor to
VOL
CH
MENU
SLEEP TIMER
PICTURE
PICTURE.
FEATURE
CH-SETTING
MPX
-/--
MENU
SELECT:
ENTER:
EXIT:
3 Press </> to display the
PICTURE (TV)
RETURN
PICTURE menu screen.
CONTRAST
[
[
[
[
[
[
30
0
]
]
COLOUR
0
0
0
0]
0
0]
0
0]
BLACK LEVEL
SHARPNESS
RED-BLUE
GREEN
0
0
]
RESET
MENU
MENU
MENU
SELECT:
ENTER:
EXIT:
EXIT:
EXIT:
4 Press ]/[ to move the cursor
and select the desired adjustment
item.
PICTURE (TV)
RETURN
CONTRAST
COLOUR
[
[
[
[
[
[
30]
0
0
0]
0
BLACK LEVEL
SHARPNESS
RED-BLUE
GREEN
0]
All of adjustment items are shown
in the diagram on page 21.
0
0]
0
0]
0
0]
RESET
SELECT:
ENTER:
5 Press </> to display the screen
for the selected adjustment item.
RETURN
COLOUR
0
+
-
SELECT:
ADJUST:
6 Press </> to make adjustment.
To adjust another item, move the
cursor by pressing ]/[ while the
MENU screen is displayed.
See the diagram on page 21 for
details of each item settings.
7 Press MENU to return to the main
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
ADJUSTMENT (Continued)
Selected item
CONTRAST
TINT
Press <.
Press >.
Decrease contrast
Toward purple
Increase contrast
Toward green
COLOUR
Lower colour intensity
Less bright
Higher colour intensity
More bright
BLACK LEVEL
SHARPNESS
RED-BLUE
GREEN
Soft picture
Hard picture
More red level
More blue level
More green level
Less green level
COLOUR SYSTEM
(AV1/AV2)
Press > to select COLOUR SYSTEM.
→ AUTO → PAL → SECAM → N358 → N443 → PAL-M→ PAL-N → PAL60
(COMPONENT)
→ AUTO → PAL → NTSC
Note:
• TINT is displayed only when N358 or N443 is selected.
• COLOUR SYSTEM is displayed only in the AV mode.
Switching the COLOUR SYSTEM
Set the system to AUTO for normal reception. The AUTO mode automatically detects the receiving
signal system and changes the reception system of the set.
When the picture or sound is not stable, switching to an appropriate system may improve the picture
or sound quality.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
ADJUSTMENT (Continued)
Adjusting the FEATURE Settings
I The FEATURE items can be set by
the user.
POWER
SLEEP
</>
DISPLAY
1 Press MENU to display the MENU
MENU
SLEEP TIMER
PICTURE
BRIGHT
screen.
MENU
FEATURE
CH-SETTING
MENU
TV
LANGUAGE DIS.MODE VIDEO
]/[
VOL
CH
MENU
SELECT:
ENTER:
EXIT:
2 Press ]/[ to move the cursor to
MENU
SLEEP TIMER
PICTURE
MPX
-/--
FEATURE.
FEATURE
CH-SETTING
3 Press </> to display FEATURE
screen.
MENU
SELECT:
ENTER:
EXIT:
4 Check the factory setting of each
item on the FEATURE screen.
The user can change the settings
by using ]/[ and </>.
FEATURE
RETURN
BRIGHTNESS
[BRIGHT
]
]
]
]
]
AUTO POWER OFF [OFF
DISPLAY MODE
AV2 IN/OUT
BLUE BACK
LANGUAGE
[NORMAL
[IN
[ON
See the diagram on page 23 for
details of each item settings.
[ENGLISH]
MENU
SELECT:
ADJUST:
EXIT:
5 Press MENU to return to the main
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
ADJUSTMENT (Continued)
Selected item
BRIGHTNESS
Factory setting
Setting change
[BRIGHT] Maximum brightness [NORMAL] Brightness 60% → Suitable for
viewing in well-lit areas. Saves
energy.
[DARK] Brightness 20% → Sufficiently bright
when viewing in dim areas.
AUTO POWER OFF
(only TV mode)
[OFF] This feature is inactive.
[ON] The power of the LCD TV set is turned
off when there is no signal for 5 minutes.
DISPLAY MODE
[NORMAL] Normal image
orientation
[MIRROR] Mirror image → To display mirror
images for special uses.
ABC
A B C
[UPSIDE DOWN] Upside down image → To
display upside down images for special uses.
A B C
[REVERSE + INVERT] Reversed and inverted
image → To display images reversed and
inverted for special uses.
ABC
AV2 IN/OUT
[IN]
[OUT
[OUT
] Line Output is selected, Output
volume is fixed, Speaker output is
available.
] Line Output is selected, Output
volume is variable, Speaker output
is Mute.
BLUE BACK
LANGUAGE
[ON] The screen is turned blue [OFF] This feature is inactive.
when there is no signal.
[
[
]
[ENGLISH]
]
I In BLUE BACK, PICTURE setting displayed in purple cannot be selected.
I AV2 IN/OUT cannot be selected in AV2 mode. Also, AV2 mode cannot be selected, when selecting AV2 OUT.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
ADJUSTMENT (Continued)
Adjusting the BRIGHTNESS Settings
You can set the brightness of the screen.
Directly setting the BRIGHTNESS
1 Press BRIGHT to display the
POWER
SLEEP
BRIGHTNESS screen.
DISPLAY
BRIGHT
2 Press BRIGHT to change the
BRIGHT
setting.
MENU
TV
LANGUAGE DIS.MODE VIDEO
BRIGHT NORMAL DARK
VOL
CH
BRIGHTNESS [BRIGHT]
Note:
• The BRIGHTNESS screen automatically
disappears in 3 seconds.
MPX
-/--
• [BRIGHT]: maximum brightness
[NORMAL]: 60% brightness (suitable for
viewing in a well-lit area and saves
energy)
[DARK]: 20% brightness (sufficiently bright
when viewing in a dimly lit area)
Setting the BRIGHTNESS on the
MENU screen
1 Press MENU to display the MENU
screen.
POWER
SLEEP
</>
2 Press ]/[ to move the cursor to
DISPLAY
MENU
SLEEP TIMER
PICTURE
FEATURE.
BRIGHT
FEATURE
3 Press </> to display FEATURE
MENU
CH-SETTING
screen.
MENU
TV
LANGUAGE DIS.MODE VIDEO
]/[
VOL
CH
MENU
SELECT:
ENTER:
EXIT:
4 Press ]/[ to move the cursor to
FEATURE
RETURN
BRIGHTNESS.
MPX
-/--
BRIGHTNESS
[BRIGHT
]
]
]
]
]
AUTO POWER OFF [OFF
5 Press </> to set the brightness.
DISPLAY MODE
AV2 IN/OUT
BLUE BACK
LANGUAGE
[NORMAL
[IN
[ON
6 Press MENU to return to the main
[ENGLISH]
screen.
MENU
SELECT:
ADJUST:
EXIT:
Download from Www.Somanuals.com. All Manuals Search And Download.
24
ADJUSTMENT (Continued)
Adjusting the DISPLAY MODE Settings
You can set the orientation of the picture.
Directly setting the DISPLAY MODE
1 Press DIS.MODE to display the
POWER
SLEEP
DISPLAY MODE screen.
DISPLAY
ABC
BRIGHT
2 Press DIS.MODE to change the
setting.
MENU
DISPLAY MODE [NORMAL ]
TV
LANGUAGE DIS.MODE VIDEO
NORMAL
MIRROR
UPSIDE DOWN
DIS.MODE
VOL
CH
REVERSE + INVERT
Note:
• The DISPLAY MODE screen automatically
disappears in 3 seconds.
A B
MPX
-/--
• [NORMAL]: normal image
[MIRROR]: mirror image
[UPSIDE DOWN]: upside down image
[REVERSE+INVERT]: reversed and
inverted image
] R O R R I M [
D I S P L A Y M
[ U P S I D E D O W N ] D I S P L A Y M
A B
DISPLAY MODE [REVERSE+INVERT]
ABC
POWER
SLEEP
Setting the DISPLAY MODE on the
MENU screen
</>
MENU
SLEEP TIMER
PICTURE
DISPLAY
BRIGHT
FEATURE
1 Press MENU to display the MENU
CH-SETTING
MENU
screen.
MENU
TV
LANGUAGE DIS.MODE VIDEO
2 Press ]/[ to move the cursor to
]/[
FEATURE.
VOL
CH
MENU
SELECT:
ENTER:
EXIT:
3 Press </> to display FEATURE
screen.
FEATURE
RETURN
BRIGHTNESS
AUTO POWER OFF [OFF
MPX
-/--
4 Press ]/[ to move the cursor to
[BRIGHT
]
]
]
]
]
DISPLAY MODE.
DISPLAY MODE
AV2 IN/OUT
BLUE BACK
LANGUAGE
[NORMAL
[IN
[ON
5 Press </> to set the DISPLAY
[ENGLISH]
MODE.
6 Press MENU to return to the main
MENU
SELECT:
ADJUST:
EXIT:
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
NICAM BROADCASTS SELECTION
Enables selection of reception mode when receiving a NICAM signal.
To let you enjoy NICAM broadcasting, this LCD
TV receives NICAM system stereo, bilingual, and
monaural broadcasts.
(When stereo
49
sound is received)
Stereo
POWER
SLEEP
NICAM
STEREO
DISPLAY
TV set is receiving a stereo broadcast.
BRIGHT
•
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
When MONO is selected, the TV sound is
output in monaural.
49
MENU
MONO
TV
LANGUAGE DIS.MODE VIDEO
VOL
CH
(When main sound
is selected)
Bilingual
49
NICAM
M1
TV set is receiving a bilingual broadcast.
• Pressing MPX changes the audio mode in the
order shown on the right.
• M1=main sound, M2=sub sound, or
MONO=monaural sound, can be selected.
(When sub sound
is selected)
49
MPX
NICAM
M2
-/--
MPX
(When monaural
sound is selected)
49
MONO
(When monaural
sound is received)
Monaural
49
NICAM
MONO
TV set is receiving a monaural broadcast.
• Each time you press MPX, the mode switches
between NICAM MONO and MONO.
49
MONO
Note:
• If approximately 3 seconds pass without a button being pressed, the mode setting is automatically termi-
nated and the TV set returns to normal mode.
• The setting can be selected individually for each channel position.
If the sound quality is poor due to a weak signal or
POWER
other problems during NICAM broadcast reception,
set the “OFF” position of the NICAM to change the
TV sound to monaural.
</>
DISPLAY
CH-SETTING
RETURN
SLEEP
BRIGHT
POSITION
[CH15
]
]
]
]
1 Press MENU to display the MENU
MENU
COLOUR SYSTEM [AUTO
SOUND SYSTEM
SKIP
[B/G
[OFF
MENU
screen.
TV
LANGUAGE DIS.MODE VIDEO
FINE
[783.25MHz]
NICAM
[OFF
[ON
]
]
2 Press ]/[ to select
]/[
IGR
VOL
CH
“CH-SETTING”.
MENU
SELECT:
ADJUST:
EXIT:
3 Press </> to display the
CH-SETTING menu.
(When off position is selected)
4 Press ]/[ to select “NICAM”.
5 Press </> to select “OFF”.
When the NICAM sound is set to the
“OFF” position, the TV sound is output
in monaural.
MPX
-/--
15
NICAM
[
MPX
Note:
• When the NICAM sound is set to the “OFF” position, MPX cannot be used to change the audio mode (stereo
and bilingual settings).
Download from Www.Somanuals.com. All Manuals Search And Download.
26
IGR (German stereo system ) BROADCASTS
Enables selection of reception mode when receiving an IGR Stereo signal.
To let you enjoy IGR broadcasting, this TV receives
IGR system stereo and bilingual broadcasts.
(When stereo
sound is received)
49
STEREO
POWER
Stereo
DISPLAY
SLEEP
BRIGHT
TV set is receiving a stereo broadcast.
• Each time you press MPX, the mode switches
between STEREO and MONO.
49
MENU
MONO
TV
LANGUAGE DIS.MODE VIDEO
When MONO is selected, the TV sound is output
in monaural.
VOL
CH
Bilingual
(When main
sound is received)
TV set is receiving a bilingual broadcast.
• Pressing MPX changes the audio mode in the
order shown on the right.
49
MAIN
MPX
-/--
MPX
• MAIN=main sound or SUB=sub sound, can be
selected.
(When sub
sound is received)
49
SUB
:
Note:
• If approximately 3 seconds pass without a button being pressed, the mode setting is automatically termi-
nated and the TV set returns to normal mode.
• The setting can be selected individually for each channel position.
(CH-SETTING menu)
If the sound quality is poor due to a weak signal
or other problems during IGR broadcast
CH-SETTING
reception, set the “OFF” position of the IGR to
RETURN
POSITION
[CH15
]
]
]
]
change the TV sound to monaural.
COLOUR SYSTEM [AUTO
SOUND SYSTEM
SKIP
[B/G
[OFF
POWER
SLEEP
1 Press MENU to display the MENU
</>
FINE
[783.25MHz]
DISPLAY
MENU
screen.
NICAM
[ON
]
]
IGR
[OFF
BRIGHT
2 Press ]/[ to select
“CH-SETTING”.
MENU
SELECT:
ADJUST:
EXIT:
MENU
TV
LANGUAGE DIS.MODE VIDEO
3 Press </> to display the
(When off position is selected)
]/[
CH-SETTING menu.
VOL
CH
15
[
4 Press ]/[ to select “IGR”.
5 Press </> to select “OFF”.
When the IGR sound is set to the
“OFF” position, the TV sound is
output in monaural.
MPX
-/--
MPX
[ is displayed if IGR is
received when IGR is set to
OFF.
Note:
Note:
• When the IGR sound is set to the “OFF” position, MPX cannot be used to change the audio mode (stereo and
bilingual settings).
Download from Www.Somanuals.com. All Manuals Search And Download.
27
CONNECTING WITH EXTERNAL DEVICES
You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals
located on the rear of the TV set.
When connecting an external device, turn off the power of the main unit first to prevent any possible
damage.
Example of external devices that can be connected
External devices that can be connected
to AV-IN2 terminal
External devices that can be connected
to AV-IN1 terminal
<Example>
• VCR
<Example>
• Camcorder
• Home video game system
* If your external device has an S-Video terminal,
S-VIDEO connection is recommended.
External devices that can be connected
to COMPONENT terminal
<Example>
• DVD, etc.
O
E
ID
V
1
N
-I
V
A
L
IO
D
U
A
R
O
E
ID
-V
S
D
A
E
H
E
N
O
H
P
O
E
ID
V
.
T
N
A
T
U
/O
2
N
-I
V
A
L
IO
D
U
R
E
A
W
O
P
T
U
P
IN
R
V
2
1
C
D
COMPONENT
Y
B
P
R
P
L
* If your external device has a component
terminal, COMPONENT connection is
recommended (you can view high-quality
pictures).
IO
D
U
A
R
:
Note:
• For the cable, use a commercially available audio/video cord.
• Only connect audio/video signals to AV-IN1 and AV-IN2/OUT terminals. Connecting other signals may result in
a malfunction.
• AV-IN1 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals
(and if you select AV-IN1), you can only view pictures from the S-VIDEO terminal. To view the picture from the
VIDEO terminal, do not connect any external devices to the S-VIDEO terminal.
• For more information about external device connections, see the manuals of your external devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
CONNECTING WITH EXTERNAL DEVICES (Continued)
Connecting a VCR, DVD player or a Camcorder (AV-IN1/AV-IN2/OUT/COMPONENT)
To AV-IN2/OUT terminal
O
E
ID
V
T
U
/O
2
-IN
V
A
L
IO
D
U
A
R
T
N
Video
E
N
O
P
M
O
C
Y
Audio(L)
Audio(R)
B
P
R
P
L
IO
D
U
A
To video/audio output
terminal
R
VCR
To COMPONENT input
(VIDEO) terminal
Y
PB
EO
D
VI
1
-IN
AV
L
IO
D
AU
R
EO
D
VI
S-
PR
D
EA
H
E
N
O
PH
O
DE
VI
T
.
AN
T
OU
2/
-IN
AV
Audio(L)
Audio(R)
L
O
DI
R
AU
E
W
PO
T
V
PU
R
IN
12
C
D
T
EN
ON
MP
CO
Y
P
B
P
R
L
O
DI
AU
R
To COMPONENT input
(AUDIO) terminal
DVD Player
To AV-IN1 terminal
Video
VIDEO
AV-IN1
Audio(L)
Audio(R)
L
AUDIO
R
To video/audio output
terminal
S-VIDEO
Camcorder
VCR
HEAD
PHONE
To S-VIDEO input terminal
ANT.
S-video
POW
ER
INPUT
DC13V
To S-video output terminal
:
Note:
• If your VCR (or other external devices) has an S-Video terminal, S-VIDEO connection is recommended. (Use an
S-video cord.)
• When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select AV-IN1), you can
only view pictures from the S-VIDEO terminal.
• You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting
an external device, use care to connect the video and audio cables to the corresponding terminals.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
CONNECTING WITH EXTERNAL DEVICES (Continued)
Outputting video and audio (video output)
You can output video and audio data from the TV set through the AV output terminals (AV-OUT).
• When using as an OUTPUT terminal, select FEATURE in the MENU and set AV2 IN/OUT to OUT.
(See page 22.)
• The factory setting for AV2 IN/OUT is IN.
VIDEO
AV-IN2/OUT
L
AUDIO
R
COMPONENT
VIDEO
-IN
1
V
A
Y
L
UDIO
A
R
S-VIDEO
HEAD
PHONE
O
E
ID
V
.
ANT
T
U
O
2/
-IN
AV
L
IO
D
AU
WER
PO
R
INPUT
DC12V
NT
NE
PO
M
CO
Y
PB
PR
L
IO
D
AU
R
Connect to a VCR,
audio amplifier, etc.
Note:
• AV2 has 2 OUT modes (see page 23).
• When using the S-VIDEO input for AV-IN1, no video output will be made to the AV output terminal, but audio
output will be made for connection to external audio systems.
• When using the COMPONENT input, no video output will be made to the AV output terminal, but audio output
will be made for connection to external audio systems.
HOW TO FIX THE CABLES
• Fix cables and cords with the attached cable
clamp so that they do not get caught when
mounting the cover.
• Connect the cables and cords after fixing the
cable clamp.
Cable clamp
Download from Www.Somanuals.com. All Manuals Search And Download.
30
TROUBLESHOOTING
I Before calling for repair service, check the following items for possible remedies to
the encountered symptoms.
TV set
Reference
Pages
Problem
Check item
6
• Make sure the AC adapter is properly inserted in the
power outlet.
• Reception other than those of broadcasting stations
can be considered.
Picture
Sound
–
There is no
picture or
sound.
11
11
• Make sure the input mode is set to TV.
• Make sure the MAIN POWER switch of the main unit
is on.
20, 21
33
• Make sure the BLACK LEVEL is properly adjusted.
• Fluorescent lamp may have reached the end of
service life.
There is no
picture.
There is no
picture from
AV-IN 1.
Picture
29
• Make sure the S-Video terminal is free of connections.
12
12
• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
There is no
sound.
6
–
• Make sure the antenna cable is properly connected.
• Bad reception can be considered.
There is no
picture or
sound, just
noise.
6
–
• Make sure the antenna cable is properly connected.
• Bad reception can be considered.
Picture is not
clear.
• Check colour adjustment.
(NTSC mode)
20, 21
Picture is light
or improperly
tinted.
• Check if BRIGHTNESS is set to DARK.
• Check CONTRAST and BLACK LEVEL adjustment.
• Fluorescent lamp may have reached the end of
service life.
22
20, 21
33
The picture is
too dark.
5
5
• Check if batteries in the remote control have sufficient
power.
• Make sure the remote sensor window is not under
strong fluorescent lighting.
Remote control does not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
TROUBLESHOOTING (Continued)
Antenna
Problem
Check item
• The reception may be weak.
• The state of the broadcast may also be bad.
• Make sure the antenna is facing the right direction.
• Make sure the outside antenna is not disconnected.
The picture is
not sharp.
The picture
moves.
• Make sure the antenna is facing the right direction.
• There may be reflected electric waves from mountains or
buildings.
The picture is
doubled or
tripled.
• There may be interference from automobiles, trains, high
voltage lines, neon lights, etc.
• There may be interference between the antenna cable and
power cable. Try positioning them further apart.
The picture is
spotted.
• Is the unit receiving interference from other devices?
Transmission antennas of radio broadcasting stations or
amateur radios, and cellular phones may also cause
interference.
• Use the unit as far apart as possible from devices that may
cause possible interference.
There are
stripes on the
screen or
colours fade.
IUse in hot and cold rooms (locations)
•
When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear
slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct
sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: –20˚C to +60˚C)
Download from Www.Somanuals.com. All Manuals Search And Download.
32
SPECIFICATIONS
LCD COLOUR TV COMPARISON
MODEL
ITEMS
LC-13E1M
LC-15E1M
LC-20E1M
13" Advanced Super View & 15" Advanced Super View & 19.7" Advanced Super View
LCD panel
BLACK TFT LCD
921,600 dots VGA
World multi system
I/DK/M/BG
BLACK TFT LCD
& BLACK TFT LCD
Number of dots
Video colour systems
TV Standard
TV Tuning System
STEREO/BILINGUAL
Universal R/C for TV only
AUTO PRESET
CATV
Auto preset tuning
NICAM-BG, I, DK/IGR-BG
Yes
TV
FUNCTION
Yes
S1~S41 ch. Hyper Band
Yes
4-LINE DIGITAL COMB FILTER
Brightness
430 cd/m2
Lamp life
60,000 Hours
H: 170° V: 170°
2.1W×2
Viewing angles
Audio output
2.5W×2
Speakers
(3 × 7.5 cm), 2 pcs
(4 × 7 cm), 2 pcs
AV1
Composite Video, S-Video, Audio
Composite Video/Audio
Y, PB, PR/Audio
Terminals
AV2 IN/OUT
Component
Headphone jack
OSD LANGUAGE
Power requirement
Weight
3.5 mm ø jack (Rear)
English/Chinese/Arabic
DC 12 V, AC110-240 V, 50/60Hz
DC 13V, AC110-240 V, 50/60Hz
7.1kg w/o accessories
3.8kg w/o accessories
4.5kg w/o accessories
Accessories
Wireless Remote Contorol, Batteries, Cable clamp, AC adapter, AC cord,
Operation manual, Antenna cable
I As a part of policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are nominal
values of production units. There may be some deviations from these values in individual units.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
DIMENSIONAL DRAWINGS
Unit: mm
LC-13E1M
158
12°
2
PRESET
1
MAIN POWER
VOL
337
150
257
35°
POWER SLEEP
187
97
100
VIDEO
AV-IN1
L
AUDIO
R
VIDEO
S-VIDEO
AV-IN 2/OUT
L
AUDIO
R
HEAD
PHONE
COMPONENT
Y
P
B
R
ANT.
P
L
AUDIO
R
POWER
INPUT
DC12V
59
147
Download from Www.Somanuals.com. All Manuals Search And Download.
34
DIMENSIONAL DRAWINGS (Continued)
Unit: mm
LC-15E1M
167
12°
2
PRESET
1
MAIN POWER
VOL
379
159
267
35°
POWER SLEEP
212
97
VIDEO
AV-IN1
100
L
AUDIO
R
VIDEO
S-VIDEO
AV-IN 2/OUT
L
AUDIO
R
HEAD
PHONE
COMPONENT
Y
P
B
R
ANT.
P
L
AUDIO
R
POWER
INPUT
DC12V
59
156
Download from Www.Somanuals.com. All Manuals Search And Download.
35
DIMENSIONAL DRAWINGS (Continued)
Unit: mm
LC-20E1M
°
MAIN POWER
VOL
2
PRESET
1
°
POWER SLEEP
Download from Www.Somanuals.com. All Manuals Search And Download.
36
LC-13E1M
LC-15E1M
LC-20E1M
TINS-A280WJZZ
02P09-JKM
Download from Www.Somanuals.com. All Manuals Search And Download.
|