ENGLISH
DISPLAY
SCIENTIFIC CALCULATOR
• Floating point system
←Symbol
MODEL
EL-501W
OPERATION MANUAL
• Scientific notation system
PRINTED IN CHINA / IMPRIMÉ EN CHINE / IMPRESO EN CHINA
04AGK (TINSE0496THZZ)
Mantissa
Exponent
INTRODUCTION
(During actual use not all symbols are displayed at the same time.)
If the value of mantissa does not fit within the range
0.000000001 – 9999999999, the display changes to scien-
tific notation. The display mode can be changed according to
the purpose of the calculation.
Thank you for purchasing the SHARP Scientific Calculator
Model EL-501W.
About the calculation examples (including some formulas
and tables), refer to the reverse side of this English manual.
Refer to the number on the right of each title on the
manual for use.
2ndF : Appears when @ is pressed, indicating that the
functions shown in orange are enabled.
HYP
: Indicates that h has been pressed and the hy-
perbolic functions are enabled. If @ H are
pressed, the symbols “2ndF HYP” appear, indicat-
ing that inverse hyperbolic functions are enabled.
After reading this manual, store it in a convenient location for
future reference.
Operational Notes
•
•
•
Do not carry the calculator around in your back pocket, as
it may break when you sit down. The display is made of
glass and is particularly fragile.
Keep the calculator away from extreme heat such as on a
car dashboard or near a heater, and avoid exposing it to
excessively humid or dusty environments.
Since this product is not waterproof, do not use it or store
it where fluids, for example water, can splash onto it.
Raindrops, water spray, juice, coffee, steam, perspiration,
etc. will also cause malfunction.
DEG/RAD/GRAD: Indicates angular units and changes each
time G is pressed. The default setting is DEG.
( )
: Appears when a calculation with parentheses is per-
formed by pressing (.
BIN
OCT
HEX
: Indicates that @ ê has been pressed.
Binary system mode is selected.
: Indicates that @ î has been pressed.
Octal system mode is selected.
: Indicates that @ ì has been pressed.
•
Clean with a soft, dry cloth. Do not use solvents or wet
cloth.
Hexadecimal system mode is selected.
•
•
•
•
Do not drop it or apply excessive force.
Never dispose of batteries in a fire.
Keep batteries out of the reach of children.
This product, including accessories, may change due to
upgrading without prior notice.
CPLX : Indicates that @ π has been pressed.
Complex number mode is selected.
STAT : Indicates that @ Æ has been pressed.
Statistics mode is selected.
M
E
: Indicates that a numerical value is stored in the
SHARP will not be liable nor responsible for any inciden-
tal or consequential economic or property damage caused
by misuse and/or malfunctions of this product and its
peripherals, unless such liability is acknowledged by law.
independent memory.
: Appears when an error is detected.
BEFORE USING THE CALCULATOR
o Press the RESET switch (on the back), with the tip of a
ball-point pen or similar object, only in the following cases.
Do not use an object with a breakable or sharp tip. Note
that pressing the RESET switch erases all data stored in
memory.
Key Notation Used in this Manual
In this manual, key operations are described as follows:
To specify A (HEX): A
•
•
•
•
When using for the first time
After replacing the batteries
To clear all memory contents
When an abnormal condition occurs and all keys are
inoperative.
To specify π
To specify Exp
: @ V
: E
Functions that are printed in orange above the key require
@ to be pressed first before the key. Numbers are not
shown as keys, but as ordinary numbers.
If service should be required on this calculator, use only a
SHARP servicing dealer, SHARP approved service facility,
or SHARP repair service where available.
Power On and Off
Press ª to turn the calculator on, and F to turn it off.
Hard Case
Clearing Numbers
•
•
•
Press ª to clear the entries except for a numerical
value in the independent memory and statistical data.
Press æ to clear the number entered prior to use of
function key.
In case of one digit correction of the entered number, press
Download from Www.Somanuals.com. All Manuals Search And Download.
ø (right shift key).
Priority Levels in Calculation
This calculator performs operations according to the following
SCIENTIFIC CALCULATIONS
priority:
•
•
Calculate in the normal mode.
In each example, press ª to clear the display.
1 Functions such as sin, x2, and %
2 yx, x¿y
Arithmetic Operations
•
3 ×, ÷
4 +, –
The closing parenthesis ) just before = or ;
5 =, M+ and other calculation ending instruction
may be omitted.
•
•
•
Calculations which are given the same priority level are
executed in sequence.
If parentheses are used, parenthesized calculations have
precedence over any other calculations.
Parentheses can be continuously used up to 15 times un-
less pending calculations exceed 4.
•
When entering only a decimal place, it is not necessary to
press 0 before ..
Constant Calculations
•
In the constant calculations, the addend becomes a con-
stant. Subtraction and division are performed in the same
manner. For multiplication, the multiplicand becomes a
constant.
INITIAL SET UP
Functions
•
•
Mode Selection
Refer to the calculation examples of each function.
For most calculations using functions, enter numerical
values before pressing the function key.
Normal mode: ª
Used to perform arithmetic operations and function calcula-
tions. BIN, OCT, HEX, CPLX and STAT are not displayed.
Random Numbers
A pseudo-random number with three significant digits can be
generated by pressing @ `. Random number gen-
eration is not possible when binary/octal/hexadecimal sys-
tem mode is set.
Binary, Octal, Decimal, or Hexadecimal system mode:
@ê, @î, @í or @ì
Complex number mode: @π
Used to perform arithmetic operations with complex numbers.
To clear this mode, press @π.
Angular Unit Conversions
Each time @ g are pressed, the angular unit changes
Statistics mode: @Æ
in sequence.
Used to perform statistical calculations. To clear this mode,
press @Æ.
Memory Calculations
This calculator has one independent memory (M). It is avail-
able in the normal mode and binary, octal, hexadecimal
system mode.
When executing mode selection, statistical data will be cleared
even when reselecting the same mode.
•
By pressing F or Automatic power off function, the
•
The independent memory is indicated by the three keys:
O, R, ;.
mode is cleared and returned to the normal mode.
Before starting a calculation, clear the memory by press-
ing ª and O.
Selecting the Display Notation and Decimal Places
•
When calculation result is displayed in the floating point
system, pressing ∞ displays the result in the scientific
notation system.
•
•
A value can be added to or subtracted from an existing
memory value. When subtracting a number from the
memory, press
and ;.
Pressing ∞ once more displays the result again in the
The contents of the memory are retained even when the
calculator is turned off. A value stored in memory will thus
remain until it is changed or until the batteries run out.
floating point system.
•
Pressing @i and any value between 0 and 9 speci-
fies the number of decimal places in the calculation result.
To clear the setting of decimal places, press @ i
..
Chain Calculations
This calculator allows the previous calculation result to be
used in the following calculation.
The previous calculation result will not be recalled after en-
tering multiple instructions.
100000÷3=
[Floating point]
[TAB set to 2]
→[Scientific notation]
→[Floating point]
ª100000/3=
@i 2
33333.33333
33333.33
∞
3.33 04
Time, Decimal and Sexagesimal Calculations
This calculator performs decimal-to-sexagesimal conversion
and sexagesimal-to-decimal conversion. In addition, the four
basic arithmetic operations and memory calculations can be
carried out using the sexagesimal system.
∞@i.
33333.33333
•
If the value for floating point system does not fit in the
following range, the calculator will display the result using
scientific notation system:
Notation for sexagesimal is as follows:
0.000000001 ≤ | x | ≤ 9999999999
Determination of the Angular Unit
In this calculator, the following three angular units (degrees,
radians, and grads) can be specified.
123.404080
degree
second
minute
DEG (°)
Press G
Note: When the calculation or conversion result is con-
verted, a residual may occur.
(rad)
RAD
GRAD (g)
Download from Www.Somanuals.com. All Manuals Search And Download.
Coordinate Conversions
STATISTICAL CALCULATIONS
•
Before performing a calculation, select the angular unit.
Press @ Æ to select statistics mode.
Y
Y
P (x,y)
P (r,θ)
The following statistics can be obtained:
r
y
↔
x
sx
σx
n
Mean of samples (x data)
θ
X
X
0
0
x
Sample standard deviation (x data)
Population standard deviation (x data)
Number of samples
Polar coord.
Rectangular coord.
Σx
Σx2
Sum of samples (x data)
Sum of squares of samples (x data)
BINARY, OCTAL, DECIMAL, AND
HEXADECIMAL OPERATIONS (N-BASE)
Data Entry and Correction
This calculator can perform the four basic arithmetic opera-
tions, calculations with parentheses and memory calcula-
tions using binary, octal, decimal, and hexadecimal num-
bers.
Entered data are kept in memory until @ Æ or F
are pressed. Before entering new data, clear the memory
contents.
When performing calculations in each system, first set the
calculator in the desired mode before entering numbers.
It can also perform conversions between numbers expressed
in binary, octal, decimal and hexadecimal systems.
Conversion to each system is performed by the following
keys:
[Data Entry]
Data k
Data * frequency k (To enter multiples of the same
data)
[Data Correction]
Correction prior to pressing k:
Delete incorrect data with ª.
Ï ê : Converts to the binary system. “BIN” appears.
Correction after pressing k:
Ï î : Converts to the octal system. “OCT” appears.
Reenter the data to be corrected and press @ J.
The number displayed after pressing k or @ J
during data entry or correction is the number of samples
(n).
Ï ì : Converts to the hexadecimal system. “HEX”
•
appears.
Ï í : Converts to the decimal system. “BIN”, “OCT”,
and “HEX” disappear from the display.
Statistical Calculation Formulas
Conversion is performed on the displayed value when these
keys are pressed.
In the statistical calculation formulas, an error will occur when:
•
the absolute value of the intermediate result or calculation
result is equal to or greater than 1 × 10100
.
Note: In this calculator, the hexadecimal numbers A – F are
•
•
the denominator is zero.
A
B
C
D
E
entered by pressing E, Ñ, ⁄, ´, I,
and l, and displayed as follows:
an attempt is made to take the square root of a negative
number.
F
A → å, B → ∫, C → ç, D → ∂, E → é, F → ƒ
ERROR AND CALCULATION RANGES
In the binary, octal, and hexadecimal systems, fractional
parts cannot be entered. When a decimal number having a
fractional part is converted into a binary, octal, or hexadeci-
mal number, the fractional part will be truncated. Likewise,
when the result of a binary, octal, or hexadecimal calculation
includes a fractional part, the fractional part will be trun-
cated. In the binary, octal, and hexadecimal systems, nega-
tive numbers are displayed as a complement.
Errors
An error will occur if an operation exceeds the calculation
ranges, or if a mathematically illegal operation is attempted.
In the case of an error, the display will show “E”.
An error can be cleared by pressing ª.
Calculation Ranges
•
Within the ranges specified, this calculator is accurate to
1 of the least significant digit of the mantissa. However, a
calculation error increases in continuous calculations due
to accumulation of each calculation error. (This is the
COMPLEX NUMBER CALCULATIONS
same for yx, x , ex, ln, etc., where continuous calculations
¿
To carry out addition, subtraction, multiplication, and division
using complex numbers, press @π to select the com-
plex number mode.
are performed internally.)
Additionally, a calculation error will accumulate and
become larger in the vicinity of inflection points and
singular points of functions.
•
A complex number is represented in the a + bi format. The
“a” is the real part while the “bi” is the imaginary part.
When inputting the real part, after inputting the number
press a. When inputting the imaginary part, after in-
putting the number press b. To obtain the result press
=.
•
Calculation ranges
10-99
~
9.999999999×1099 and 0.
If the absolute value of an entry or a final or intermediate
result of a calculation is less than 10–99, the value is consid-
ered to be 0 in calculations and in the display.
•
•
Immediately after completing calculation, you can recall
the value of the real part with a, and the value of the
imaginary part with b.
If the complex numbers are represented as polar coordi-
nates, press @} after they are input with a
and b.
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY REPLACEMENT
SPECIFICATIONS
Calculations:
Scientific calculations, binary/octal/
hexadecimal number calculations,
complex number calculations, sta-
tistical calculations, etc.
Mantissas of up to 10 digits
4 calculations
Notes on Battery Replacement
Improper handling of batteries can cause electrolyte leakage
or explosion. Be sure to observe the following handling rules:
•
•
•
•
Replace both batteries at the same time.
Do not mix new and old batteries.
Make sure the new batteries are the correct type.
When installing, orient each battery properly as indicated in
the calculator.
Internal calculations:
Pending operations:
Power source:
3V ¶ (DC):
Alkaline batteries (LR44) × 2
0.0005 W
Power consumption:
Operating time:
•
Batteries are factory-installed before shipment, and may be
exhausted before they reach the service life stated in the
specifications.
Approx. 3000 hours
whencontinuouslydisplaying55555.
at 25°C (77°F).
Varies according to use and other
factors.
When to Replace the Batteries
If the display has poor contrast, the batteries require replace-
ment.
Operating temperature: 0°C – 40°C (32°F – 104°F)
External dimensions:
78.6 mm (W) × 144 mm (D) × 11.6
mm (H)
3-3/32” (W) × 5-21/32” (D) × 15/32”
(H)
Approx. 75 g (0.17 lb)
Caution
•
Fluid from a leaking battery accidentally entering an eye could
result in serious injury. Should this occur, wash with clean
water and immediately consult a doctor.
Weight:
•
•
Should fluid from a leaking battery come in contact with your
skin or clothes, immediately wash with clean water.
If the product is not to be used for some time, to avoid damage
to the unit from leaking batteries, remove them and store in a
safe place.
(Including batteries)
Accessories:
Batteries × 2 (installed), operation
manual, quick reference card and
hard case
•
•
Do not leave exhausted batteries inside the product.
Do not fit partially used batteries, and be sure not to mix
batteries of different types.
Keep batteries out of the reach of children.
Exhausted batteries left in the calculator may leak and
damage the calculator.
Explosion risk may be caused by incorrect handling.
Do not throw batteries into a fire as they may explode.
FOR MORE INFORMATION ABOUT
SCIENTIFIC CALCULATOR
•
•
Visit our Web site.
•
•
Replacement Procedure
1. Turn the power off by pressing F.
2. Loosen both screws and remove the battery cover. (Fig. 1)
Fig. 1
Fig. 2
3. Remove the used batteries then replace with two fresh
batteries with the positive sides (+) facing up. (Fig. 2)
4. Replace the battery cover and screws.
5. Press ª.
•
Make sure that the display appears as shown below. If the
display does not appear as shown, reinstall the batteries
and check the display once again.
Automatic Power Off Function
This calculator will turn itself off to save battery power if no
key is pressed for approximately 8 minutes.
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
EL-501W
34+57=
45+57=
34 + 57 =
91.
102.
CALCULATION EXAMPLES
ANWENDUNGSBEISPIELE
EXEMPLES DE CALCUL
EJEMPLOS DE CÁLCULO
EXEMPLOS DE CÁLCULO
ESEMPI DI CALCOLO
45 =
79–59=
56–59=
79 - 59 =
56 =
20.
–3.
56÷8=
92÷8=
56 / 8 =
92 =
7.
11.5
REKENVOORBEELDEN
PÉLDASZÁMÍTÁSOK
68×25=
68×40=
68 * 25 =
1700.
2720.
40 =
PŘÍKLADY VÝPOČTŮ
RÄKNEEXEMPEL
sutSUTVGh
HIle¡≈L⁄™
Á#!%
LASKENTAESIMERKKEJÄ
èêàåÖêõ ÇõóàëãÖçàâ
UDREGNINGSEKSEMPLER
sin60[°]=
ª 60 s
0.866025403
π
G@V/ 4
=u
cos–[rad]=
4
0.707106781
50.
–1
tan 1=[g]
G 1 @T
G
CONTOH-CONTOH PENGHITUNGAN
CONTOH-CONTOH PERHITUNGAN
(cosh 1.5 +
2
ª( 1.5 hu+
1.5 hs)L
sinh 1.5)
=
20.08553692
5 / 7 =
5
–1
7
tanh – =
@Ht
0.895879734
2.995732274
1.698970004
20.08553692
50.11872336
ln 20 =
20 I
ªæøº
log 50 =
3
50 l
e
=
3 @e
1.7 @¡
3×
3 *
3.
0.
5.
0.
31.
ª
1.7
10
=
4×5
4 * 5
æ
6 + 7 =
k
↓
1
1
6 @≈+ 7 @
≈=
– + – =
4×6+7=
6
7
0.309523809
–2024.984375
6.447419591
134
k↓
123
134
ø ø
23
134.
1.
123.
–2
4
2
8
– 3 × 5
=
8 ™ 2
- 3 ™
4 * 5 L=
1
–
12 ™ 3 ™ 4
@≈=
(12 )4=
3
4
3
3 →4
3 ™ 4 @º=
64.
4
¿
–
=
49 ⁄- 81 @Á
4 =
49
¿
81
4.
3.
+-*/()
E
3
27=
27 @#
¿
45+285÷3=
ª 45 + 285 / 3 =
140.
4! =
500×25%=
120÷400=?%
4 @!
24.
18+6
15–8
( 18 + 6 )/
( 1 5 - 8 =
=
500 * 25 @%=
120 / 400 @%=
125.
30.
3.428571429
42×(–5)+120=
42 * 5
+ 120 = –90.
500+(500×25%)= 500 + 25 @%=
625.
280.
(5×103)÷(4×10–3)= 5 E 3 / 4 E
3
=
1250000.
400–(400×30%)= 400 - 30 @%=
Download from Www.Somanuals.com. All Manuals Search And Download.
6+4=ANS
ANS+5
ª 6 + 4 =
+ 5 =
10.
15.
44+37=ANS
44 + 37 =
⁄
81.
9.
√
ANS
=
´¨
12°39’18”05
→ [10]
ª 12.391805 ´
12.65501389
123.678 → [60]
123.678 @¨
123.404080
sin62°12’24” = [10] 62.1224 ´s
0.884635235
ab{}
θ = sin–1 x, θ = tan–1 x
θ = cos–1 x
DEG
–90 ≤ θ ≤ 90
0 ≤ θ ≤ 180
ª 6 a 4 b
π
—
2
π
—
2
@{[r ]
b[θ]
a[r ]
7.211102551
33.69006753
7.211102551
RAD
–
≤ θ ≤
0 ≤ θ ≤ π
x = 6
y = 4
r =
θ = [°]
→
GRAD
–100 ≤ θ ≤ 100
0 ≤ θ ≤ 200
14 a 36 b
@}[x]
b[y]
g
r = 14
x =
11.32623792
8.228993532
11.32623792
→
θ = 36[°]
y =
90°→ [rad]
→ [g]
→ [°]
ª 90 @g
@g
@g
1.570796327
a[x]
100.
90.
êîìí
–1
sin 0.8 = [°]
0.8 @S
@g
@g
@g
53.13010235
0.927295218
59.03344706
53.13010235
→ [rad]
→ [g]
→ [°]
DEC(25)→BIN
ª@í 25 @ê
11001.
HEX(1AC)
ª@ì 1AC
@ê
→
→
→
BIN
OCT
DEC
110101100.
654.
@î
RO;
@í
428.
BIN(1010–100)
×11 =
ª@ê( 1010 - 100 )
* 11 = 10010.
ªO 8 * 2 =O
24 /R=
16.
1.5
80.
24÷(8×2)=
(8×2)×5=
R* 5 =
HEX(1FF)+
OCT(512)=
HEX(?)
ª@ì 1FF @î+
512 =
1511.
349.
ªO
12 + 5 =;
@ì
12+5
–) 2+5
+)12×2
M
17.
–7.
24.
34.
2 + 5 =
;
2FEC–
2C9E=(A)
+)2000–
1901=(B)
(C)
ªO@ì 2FEC -
12 * 2 =;
2C9E ;
2000 -
1901 ;
R
34E.
R
6FF.
A4d.
2637.
$1= ¥140
¥33,775=$?
$2,750=¥?
140 O
33775 /R=
2750 *R=
140.
241.25
385000.
→
DEC
@í
r = 3cm
πr = ?
3 O
@V*R
L=
3.
2
28.27433388
Download from Www.Somanuals.com. All Manuals Search And Download.
• • • •
DATA
30
40
40
50
πab{}
STAT
0.
@Æ@Æ
30 k
CPLX
0.
1.
3.
4.
@ π
(12–6i) + (7+15i) 12 a 6
40 * 2 k
50 k
b+ 7 a 15b
– (11+4i) =
- 11a 4b=
8.
5.
8.
b
a
50 @J
40 * 2 @J
3.
1.
↓
DATA
30
45
45
45
6×(7–9i) ×
6 a* 7 a 9
b*
(–5+8i) =
5
a 8 b=
222.
606.
45 * 3 k
60 k
4.
5.
b
60
16×(sin30°+icos30°) 16 a* 30 sa 30 ub
=
(sin60°+icos60°)
/ 60sa 60 ub
=
b
13.85640646
8.
Σx
Σx2 – nx2
x =
n
σx =
y
n
8 a 70 b@}
+ 12 a 25 b@}
=@{ [r]
A
Σx2 – nx2
n – 1
Σx = x + x + ··· + x
n
1
2
sx =
Σx2 = x 2 + x 2 + ··· + x
2
r
r1
1
2
n
18.5408873
B
θ
θ1
r2
θ2
b [θ]
42.76427608
x
r1 = 8, θ1 = 70°
r2 = 12, θ2 = 25°
↓
Function
Funktion
Fonction
Función
Função
Funzioni
Functie
Dynamic range
zulässiger Bereich
Plage dynamique
Rango dinámico
Gama dinâmica
Campi dinamici
Rekencapaciteit
r = ?, θ = ?°
(1 + i)
↓
r = ?, θ = ?°
1 a 1 b=
@{ [r]
b [θ]
1.
1.414213562
45.
Függvény
Funkce
Megengedett számítási tartomány
Dynamický rozsah
Funktion
Funktio
Definitionsområde
Dynaaminen ala
ÆkJ~£pnzw
îÛÌ͈Ëfl
Funktion
ÑË̇Ï˘ÂÒÍËÈ ‰Ë‡Ô‡ÁÓÌ
Dynamikområde
DATA
STAT
0.
95
80
80
75
75
75
50
@Æ
95 k
1.
3.
6.
7.
80 * 2 k
75 * 3 k
50 k
Fungsi
Fungsi
Julat dinamik
Kisaran dinamis
DEG:
| x | ≤ 4.499999999 × 1010
(tan x : | x | ≠ 90 (2n–1))*
| x | ≤ 785398163.3
x=
σx=
n=
Σx=
Σx2=
sx=
sx2=
~
@p
n
75.71428571
12.37179148
7.
530.
41200.
13.3630621
178.5714286
sin x,
tan x
RAD:
π
2
(tan x : | x | ≠ – (2n–1))*
GRAD:
| x | ≤ 4.999999999 × 1010
@z
@w
£
(tan x : | x | ≠ 100 (2n–1))*
DEG:
RAD:
GRAD:
| x | ≤ 4.500000008 × 1010
| x | ≤ 785398164.9
cos x
| x | ≤ 5.000000009 × 1010
L
sin–1x, cos–1x
tan–1x, 3¿x
In x, log x
| x | ≤ 1
• • • •
| x | < 10100
10–99 ≤ x < 10100
–10100 < x ≤ 230.2585092
–10100 < x < 100
x
e
x
10
sinh x,
cosh x
| x | ≤ 230.2585092
• • • •
Download from Www.Somanuals.com. All Manuals Search And Download.
• • • •
tanh x
In Europe:
| x | < 10100
This equipment complies with the requirements of Directive 89/
336/EEC as amended by 93/68/EEC.
sinh–1 x
cosh–1 x
tanh–1 x
x2
| x | < 5 × 1099
1 ≤ x < 5 × 1099
| x | < 1
Dieses Gerät entspricht den Anforderungen der EG-Richtlinie
89/336/EWG mit Änderung 93/68/EWG.
| x | < 1050
Ce matériel répond aux exigences contenues dans la directive
89/336/CEE modifiée par la directive 93/68/CEE.
¿x
1/x
0 ≤ x < 10100
| x | < 10100 (x ≠ 0)
0 ≤ n ≤ 69*
Dit apparaat voldoet aan de eisen van de richtlijn 89/336/EEG,
gewijzigd door 93/68/EEG.
n!
Dette udstyr overholder kravene i direktiv nr. 89/336/EEC med
tillæg nr. 93/68/EEC.
→
→
D.MS
DEG
| x | < 1 × 10100
y
x
x, y → r, θ
| x |, | y | < 1050
0 ≤ r < 10100
|
|, x + y < 10
2
2
100
Quest’ apparecchio è conforme ai requisiti della direttiva 89/
336/EEC come emendata dalla direttiva 93/68/EEC.
–
ꢀ ꢁꢂꢃꢄꢅꢆ ꢅꢄ ꢇ ꢄꢈꢅꢉ ꢄꢊꢅꢄꢋꢌꢃꢍꢎꢊꢁꢅꢄꢏ ꢅꢏꢐ ꢄꢋꢄꢏꢅꢉ ꢁꢏꢐ ꢅꢑꢊ
ꢌꢒꢇꢂꢏꢓꢊ ꢅꢇꢐ ꢔꢈꢍꢑꢋꢄꢕꢃꢉꢐ ꢔꢊꢑ ꢇꢐ 89/336/ꢔꢖꢗ, !ꢋꢑꢐ ꢌ
ꢃꢄꢊꢌꢊꢏ "!ꢐ ꢄꢈꢅ!ꢐ ꢈ"ꢋ#ꢇꢍꢓ$ꢇꢃꢁ ꢄꢋ! ꢅꢇꢊ ꢌꢒꢇꢂꢎꢄ 93/68/
ꢔꢖꢗ.
DEG:
RAD:
| θ | < 4.5 × 1010
r, θ → x, y
| θ | ≤ 785398163.3
GRAD : | θ | < 5 × 1010
DEG→RAD, GRAD→DEG: | x | < 10100
RAD→GRAD: | x | < × 10
DRG |
Este equipamento obedece às exigências da directiva 89/336/
CEE na sua versão corrigida pela directiva 93/68/CEE.
π
98
–
2
• y > 0:
• y = 0:
• y < 0:
–10100 < x lny ≤ 230.2585092
Este aparato satisface las exigencias de la Directiva 89/336/
CEE modificada por medio de la 93/68/CEE.
0 < x < 10100
x
y
x = n
1
x
Denna utrustning uppfyller kraven enligt riktlinjen 89/336/EEC
så som kompletteras av 93/68/EEC.
(0 < | x | < 1: – = 2n–1, x ≠ 0)*,
–10100 < x ln | y | ≤ 230.2585092
1
Dette produktet oppfyller betingelsene i direktivet 89/336/EEC
i endringen 93/68/EEC.
• y > 0: –10100 < – lny ≤ 230.2585092 (x ≠ 0)
x
• y = 0: 0 < x < 10100
Tämä laite täyttää direktiivin 89/336/EEC vaatimukset, jota on
muutettu direktiivillä 93/68/EEC.
x
¿y
• y < 0: x = 2n–1
1
x
(0 < | x | < 1 : – = n, x ≠ 0)*,
чÌÌÓ ÛÒÚÓÈÒÚ‚Ó ÒÓÓÚ‚ÂÚÒÚ‚ÛÂÚ Ú·ӂ‡ÌËflÏ ‰ËÂÍÚË‚˚
89/336/EEC Ò Û˜ÂÚÓÏ ÔÓÔ‡‚ÓÍ 93/68/EEC.
Ez a készülék megfelel a 89/336/EGK sz. EK-irányelvben és
annak 93/68/EGK sz. módosításában foglalt követelményeknek.
1
–10100 < – ln | y | ≤ 230.2585092
x
(A+Bi)+(C+Di) | A C | < 10100
(A+Bi)–(C+Di) | B D | < 10100
(AC – BD) < 10100
Tento pfiístroj vyhovuje poÏadavkÛm smûrnice 89/336/EEC v
platném znûní 93/68/EEC.
(A+Bi)×(C+Di)
(AD + BC) < 10100
AC + BD
< 10100
C2 + D2
(A+Bi)÷(C+Di)
BC – AD
< 10100
C2 + D2
C2 + D2 ≠ 0
DEC
BIN
:
:
| x | ≤ 9999999999
1000000000 ≤ x ≤ 1111111111
0 ≤ x ≤ 111111111
4000000000 ≤ x ≤ 7777777777
0 ≤ x ≤ 3777777777
FDABF41C01 ≤ x ≤ FFFFFFFFFF
0 ≤ x ≤ 2540BE3FF
→DEC
→BIN
→OCT
→HEX
OCT
HEX
:
:
* n: integer / ganze Zahlen / entier / entero / inteiro / intero /
geheel getal / egész számok / celé číslo / heltal /
kokonaisluku / ˆÂÎ˚ / heltal /
/
/
/ integer / bilangan bulat
Download from Www.Somanuals.com. All Manuals Search And Download.
|