LC-32HT3U
LC-37HT3U
LC-42HT3U
Remote Replicator
Duplicateur distant
Duplicador remoto
AN-H06RCU
Remote control unit
Télécommande
Unidad de control remoto
AN-32HTRC
OPERATION MANUAL FOR HOTEL OPERATOR
MODE D'EMPLOI POUR HOTELIER
MANUAL DE OPERACIÓN PARA EMPRESAS HOTELERAS
LC-32HT3U
LC-37HT3U
LC-42HT3U
AN-32HTRC
AN-H06RCU
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32HT3U/LC-37HT3U/LC-42HT3U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
“Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of
mercury. Disposal of these materials may be regulated due to environmental
considerations. For disposal or recycling information, please contact your local
Trademarks
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully
before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Information
15) Power Sources—This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts—When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
IMPORTANT INFORMATION ..................................1
Trademarks..............................................................2
IMPORTANT SAFETY INSTRUCTIONS..................3
Contents ..................................................................4
General notes...........................................................6
Accessories ........................................................6
TV modes index ..................................................6
Explanation of the remote control unit, TV modes
and the buttons on the TV.................................6
Quick TV cloning guide (for the PPV TV)...............7
Quick TV cloning guide (for the Normal TV)..........8
Quick setup for LODGENET users.........................9
PPV System ........................................................9
Function Menu Setup ..........................................9
Default Channel .................................................10
Default Volume ..................................................10
Room Mode ......................................................11
CH Re-Map .......................................................11
View Mode ........................................................12
Quick setup for ONCOMMAND users .................13
PPV System ......................................................13
Default Channel .................................................13
Default Volume ..................................................14
Room Mode ......................................................14
Label Input.........................................................15
CH Re-Map .......................................................15
View Mode ........................................................16
Quick setup for NXTV users .................................17
PPV System ......................................................17
Default Channel .................................................17
Default Volume ..................................................18
Room Mode ......................................................18
CH Re-Map .......................................................19
View Mode ........................................................19
Quick setup for nSTREAMS users.......................20
PPV System ......................................................20
Function Menu Setup ........................................20
Default Channel .................................................20
Default Volume ..................................................21
Room Mode ......................................................21
CH Re-Map .......................................................22
View Mode ........................................................22
Quick setup for SeaChange users.......................23
PPV System ......................................................23
Default Channel .................................................23
Default Volume ..................................................24
Room Mode ......................................................24
CH Re-Map .......................................................25
View Mode ........................................................25
Remote Replicator ................................................26
Part names........................................................26
Inserting the battery...........................................26
Storing the settings from the TV.........................27
Transferring the settings to the TV .....................27
Storing the settings from the TV (for NXTV users
only) ................................................................27
Transferring the settings to the TV (for NXTV users
only) ................................................................27
Configuration memory banks.............................27
DIAGNOSTICS mode (PPV TV only)...................27
Other settings for the PPV TV mode....................29
PPV TV menu ....................................................29
TV Mode .......................................................29
Reset ............................................................29
Function menu (for LODGENET and nSTREAMS
users only).......................................................30
Option menu (for LODGENET and nSTREAMS
users only).......................................................30
Remote control unit .............................................31
Part names........................................................31
Inserting the batteries ........................................32
Using the remote control unit.............................32
Cautions regarding the remote control unit....32
Preparation ............................................................33
Connecting a Blu-ray disc player, HD-DVD
player, DVD player or a Digital TV STB (Air or
Cable)..............................................................33
Connecting a VCR, game console
or camcorder...................................................33
Using Digital Audio Output.................................33
Connecting HDMI equipment.............................34
Connecting a PC ...............................................34
PC compatibility chart........................................34
Watching TV...........................................................35
Turning on the power.........................................35
Turning off the power.........................................35
Initial setup ........................................................36
Simple button operations for changing channels...37
Simple button operations for changing volume/
sound..............................................................38
Setting MTS/SAP stereo mode..........................39
Setting Digital broadcasting audio mode............39
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Basic adjustment settings....................................40
Menu operation buttons.....................................40
On-Screen Display.............................................40
PPV TV mode menu items
Appendix ................................................................72
Troubleshooting.................................................72
Troubleshooting-Digital broadcasting.................72
(for TV/INPUT 1/INPUT 2/INPUT 3)..................41
PPV TV mode menu items (for HDMI/PC-IN)......42
NORMAL TV mode menu items.........................43
EZ Setup ...........................................................44
Channel Setup...................................................44
Antenna Setup - DIGITAL ..................................45
Favorite channel setting .....................................46
Picture adjustments...........................................47
OPC setting ..................................................47
Advanced picture adjustments......................48
Color Temperature........................................48
Black.............................................................48
I/P Setting.....................................................48
Film Mode (3:2 pull-down).............................48
3D-Y/C .........................................................48
Monochrome ................................................48
Range of OPC...............................................48
Sound adjustment .............................................49
Surround ...........................................................49
Power Control ...................................................50
Digital Setup ......................................................50
Audio Setup..................................................50
Using external equipment.....................................51
Displaying an external equipment image ............51
Input Select .......................................................51
Displaying an image from HDMI equipment........52
Input Skip ..........................................................52
Useful adjustment settings...................................53
Auto Sync. adjustment (for Analog PC input mode
only) ................................................................53
Fine Sync. adjustment .......................................53
Language setting...............................................54
Image position...................................................54
Reset.................................................................54
Input Label.........................................................55
Sleep Timer .......................................................55
View Mode for 4:3 Programs .............................56
View Mode for HD Programs .............................56
View Mode (for PC input mode) .........................57
Advanced Option setting ...................................58
Audio Only ....................................................58
Digital Noise Reduction .................................58
Output Select................................................58
Color System ................................................58
Program Title Display ....................................58
AV MODE..........................................................59
Input Signal (for Analog PC input mode only) .....59
Closed Captions and Digital Closed Captions....60
Caption Setup ...................................................61
Secret number setting for parental control (AV
input mode only)..............................................62
Parental control (setting V-CHIP level)................64
How to temporarily release the V-CHIP BLOCK.67
Reactivating the temporarily released V-CHIP
BLOCK............................................................67
Other viewing options...........................................68
Freezing images.................................................68
Presetting remote control function .....................68
5
Download from Www.Somanuals.com. All Manuals Search And Download.
General notes
Accessories
Accessories included with the LC-32HT3U/LC-37HT3U/LC-42HT3U
See pages 8, 12 and 13 of the operation manual of LC-32HT3U/LC-37HT3U/LC-42HT3U.
Optional accessories for the LC-32HT3U/LC-37HT3U/LC-42HT3U
• Remote Replicator: Stores the TV settings from one TV (LC-32HT3U/LC-37HT3U/LC-42HT3U) and transfers the TV settings
to other TVs (LC-32HT3U/LC-37HT3U/LC-42HT3U).
•
Remote control unit: Sets or adjusts the TV. The remote control unit is for hotel operators only and should not be used by hotel guests.
TV modes index
The diagram below explains the TV modes of the LC-32HT3U/LC-37HT3U/LC-42HT3U models.
Press MASTER
PPV TV mode
(ON LINE/STAND ALONE)
(Factory preset)
c
Normal TV mode
d
Set from the TV Mode menu
Press MASTER
c
MASTER mode
ROOM mode
d
Press ROOM
PPV TV mode: This mode has two modes, MASTER mode and ROOM mode.
• MASTER mode: Allows hotel operators to set or adjust the TV.
• ROOM mode: This mode is for hotel guests.
Normal TV mode: The TV functions as a normal TV. (See page 29.)
Explanation of the remote control unit, TV modes and the buttons on the TV
The accessible buttons of the remote control unit and TV panel will change depending on the TV mode.
Remote control unit of
LCD TV
Remote
Replicator
Remote
control unit
supplied by
PPV
TV
buttons
Same
function as
MASTER
or ROOM
button
Other
functions
Other
buttons
provider
TV buttons
g
g
–
g
–
g
MASTER mode
R/C
On
Off
On
Off
ONLINE*1
Buttons
g
Room
g
–
mode
TV
Buttons*3
MASTER mode
R/C
g
PPV TV
g
g
–
g
g
On
Off
On
Off
STAND
Buttons
–
–
Room
ALONE*2
–
mode
TV
g
–
Buttons*3
g*4
g
g
g
g
Normal TV
........ Enabled
........ Disabled
........ No effect
g
l
*1ONLINE: When the TV is connected to the PPV terminal box, and the PPV terminal box is operational
*2STAND ALONE: When the TV is not connected to the PPV terminal box or the TV is connected to the PPV terminal box, but the PPV terminal box is not operationa
l
*3 TV INPUT Button: You can change the input source using INPUT on the TV when “TV Buttons” and “TV INPUT Button” are set to Respond.
*4 The LEARN/TEACH buttons also work in Normal TV mode. (The DIAGNOSTICS button will have no effect.)
NOTE
• Depending on the Room Mode setting (see page 11, 14, 18, 21 and 24), press MASTER or ROOM on the Remote Replicator
to turn on or turn off the TV.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
General notes
Quick TV cloning guide (for the PPV TV)
The steps below show the process of setting TVs for hotel guest rooms.
Press MASTER on the Remote Replicator to turn on the TV. (See page 26.)
1
Use the remote control unit to set or adjust the TV (TV with the master settings).
2
(LODGENET users: See pages 9 to 12. ONCOMMAND users: See pages 13 to
16. NXTV users: See pages 17 to 19. nSTREAMS users: See pages 20 to 22.
SeaChange users: See pages 23 to 25.)
Connect the TRANSPORT terminal of the TV to the TRANSPORT (RJ-11)
connector of the Remote Replicator with the supplied RJ-11 cable.
3
• For NXTV users, perform steps on page 27 before connecting the TV and the
Remote Replicator.
RJ-11 cable
Press MEMORY SELECT on the Remote Replicator to select the memory bank number in which you
want to store the data. (See pages 26 and 27.)
4
Press LEARN on the Remote Replicator to store the TV settings in the Remote Replicator. (See pages 26
and 27.)
5
Disconnect the RJ-11 cable from the TV (TV with the master settings), and connect to the other TV (TV to
6
be cloned) that you want to transfer the data.
• For NXTV users, perform steps on page 27 before connecting the TV and the Remote Replicator.
Press MEMORY SELECT on the Remote Replicator to select the memory bank number that contains the
data you want to send. (See pages 26 and 27.)
7
Press TEACH on the Remote Replicator to transfer the TV settings. (See pages 26 and 27.)
8
7
Download from Www.Somanuals.com. All Manuals Search And Download.
General notes
Quick TV cloning guide (for the Normal TV)
If already in Normal TV mode, begin from step 6.
Press MASTER on the Remote Replicator to turn on the TV. (See page 26.)
1
Press MENU and the MENU screen displays.
2
Press
/
to select “PPV TV”.
c d
3
PPV TV
TV Mode
PPV System
[PPV TV]
[LODGENET]
Function Menu Setup
Default Channel
Default Volume
Room Mode
[2]
[20]
CH Re-Map
Reset
Press
/
to select “TV Mode”, and then press ENTER.
a b
4
5
Press
/
to select “Normal TV”, and then press ENTER.
c d
• When you select “Normal TV”, enter “2433” for the password, and then the TV will automatically turn off after the
message. The TV enters the Normal TV mode when it is turned on again.
Selected item
PPV TV
Description
Sets and adjusts the TV, and
communicates with the PPV terminal
box.
Normal TV
Functions as a normal TV.
Use the remote control unit to set or adjust the TV. (TV with the master settings) (See pages 36, 44 to 67.)
Perform step 3 through step 8 for PPV TV on the previous page. (See page 7.)
6
7
8
Wait until the power is completely off.
To turn the power on again after performing TEACH, wait approximately 15 seconds after the TV enters
Standby Mode (dark screen). Then turn the power on.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for LODGENET users
For quick setup, use the remote control unit to perform
Function Menu Setup
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
You can select the menu items to display on the
Function menu. (See page 30.) The Function menu can
be displayed by pressing the TV FUNCTION button
on the LODGENET remote control unit.
PPV TV
TV Mode
[PPV TV]
Repeat steps 1 and 2 in PPV System.
1
PPV System
[LODGENET]
Function Menu Setup
Default Channel
Default Volume
Room Mode
Press
/
to select “Function Menu Setup”,
a b
2
3
[2]
and then press ENTER.
[20]
Press
/
to select the desired item, and
a b
then press ENTER to select “On” or “Off”.
CH Re-Map
Reset
Selected item
Language
Description
You can select a language from
English, French and Spanish for On
Screen Display. (See page 30.)
PPV System
Sets the Pay Per View system.
View Mod
You can select the screen size.
(See page 30.)
Input Select
Parental CTRL
You can select the input source.
(See page 30.)
You can set the secret number.
(See pages 62 to 67.)
Press MENU to exit.
4
Press MENU and the MENU screen displays.
1
2
3
4
NOTE
• Parental CTRL setting from the hotel server has priority
over the TV setting.
Press
Press
/
to select “PPV TV”.
c d
/
to select “PPV System”, and then
a b
press ENTER.
Press
/
to select “LODGENET”, and then
a b
press ENTER.
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for LODGENET users
Default Channel
Default Volume
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
Sets the default channel.
Repeat steps 1 and 2 in Default Channel.
1
Press a/b to select “Default Volume”, and
then press ENTER.
2
Press MENU and the MENU screen displays.
1
Press a/b to select “Volume” or “Auto
adjustment”.
3
Press
/
to select “PPV TV”.
c d
2
For “Volume”, press
volume.
For “Auto adjustment”, press
“On” or “Off”.
/
to set the default
c d
4
Press
/
to select “Default Channel”, and
a b
/
to select
c d
3
4
5
then press ENTER.
Press MENU to exit.
Press a/b to select “Analog/Digital”, and then
5
press ENTER.
Press
/
to select “Analog” or “Digital”, and
NOTE
c d
then press ENTER.
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 3, and then
press ENTER.
Press
/
to select “Analog” or “Digital”, and
a b
6
7
then press ENTER.
Input the default channel number by using
0 – 9, and then press ENTER.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
Press MENU to exit.
8
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for LODGENET users
Room Mode
CH Re-Map
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
Sets the channel order (logical channel) to your
preferred order.
Press MENU and the MENU screen displays.
1
Press
/
to select “PPV TV”.
c d
2
Press a/b to select “Room Mode”, and then
3
4
5
Press MENU and the MENU screen displays.
press ENTER.
1
Press
/
to select the desired item, and
a b
Press c/d to select “PPV TV”.
then press ENTER.
2
For “Maximum Volume”, press c/d to set the
volume.
For “R/C Buttons”, “TV Buttons” and “TV INPUT
Button”, press c/d to select “Respond” or
“No Respond”, and then press ENTER.
Press
/
to select “CH Re-Map”, and then
a b
3
press ENTER.
Press
/
to select “CH Set”, and then press
a b
4
5
6
ENTER.
Selected item
Description
Press
/
/
/
to select the Logical CH you
a b c d
want to set, and then press ENTER.
Maximum
Volume
Set the maximum volume in the
ROOM mode.
Press
/
to select “ANALOG” , “DIGITAL”
a b
or the desired input source, and then press
ENTER.
R/C Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
• Select “Reset” for resetting the channel to the
factory preset value.
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
Press 0
2
2
0
1
ENTER
s s s s s
Repeat the steps 5 and 6 until all desired
logical channels are set.
Press MENU to exit.
4
5
6
Press MENU to exit.
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
NOTE
• For resetting all logical channels to the factory preset
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
values, select “CH Reset All” in step 4, press
select “Yes”, and then press ENTER.
/
to
c d
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV.
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 4.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for LODGENET users
View Mode
You can set the picture size for when the TV is turned
on.
Press VIEW MODE.
• The View Mode menu displays.
1
Press VIEW MODE or a/b while the View
2
Mode menu is still on the screen.
• You can sequentially select a View Mode that has
its own aspect ratio.
View Mode
Side Bar
S. Stretch
Zoom
Stretch
Side Bar:
Suitable for viewing
conventional 4:3 programs in
their normal format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing wide-
screen 2.35:1 anamorphic
DVDs in full screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
When you are finished setting the
menu items, perform steps 3 to 8 on
page 7 to complete the storing and
transferring of the data to the TV
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for ONCOMMAND users
For quick setup, use the remote control unit to perform
Default Channel
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
Sets the default channel.
Repeat steps 1 and 2 in PPV System.
1
2
PPV TV
TV Mode
[PPV TV]
Press
/
to select “Default Channel”, and
a b
PPV System
Default Channel
Default Volume
Room Mode
Label Input
CH Re-Map
Reset
[ONCOMMAND]
then press ENTER.
[2]
Press
/
to select “Analog/Digital”, and
a b
[20]
3
4
then press ENTER.
Press
/
to select “Analog” or “Digital”, and
c d
then press ENTER.
Press a/b to select “Analog” or “Digital”, and
then press ENTER.
5
6
PPV System
Input the default channel number by using
0 – 9, and then press ENTER.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
Sets the Pay Per View system.
Press MENU to exit.
7
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).
Press MENU and the MENU screen displays.
1
2
Press c/d to select “PPV TV”.
Press
/
to select “PPV System”, and then
a b
3
4
press ENTER.
Press
then press ENTER.
/
to select “ONCOMMAND”, and
a b
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for ONCOMMAND users
Default Volume
Room Mode
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
Repeat steps 1 and 2 in Default Volume.
1
Press
/
to select “Room Mode”, and then
a b
2
3
4
press ENTER.
Press
then press ENTER.
/
to select the desired item, and
a b
For “Maximum Volume”, press
volume.
/
to set the
c d
For “R/C Buttons”, “TV Buttons” and “TV
INPUT Button”, press
/
to select
Press MENU and the MENU screen displays.
c d
1
“Respond” or “No Respond”, and then press
ENTER.
Press
Press
/
to select “PPV TV”.
c d
2
3
4
5
Selected item
Description
Maximum
Volume
Set the maximum volume in the
ROOM mode.
/
to select “Default Volume”, and
a b
then press ENTER.
R/C Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
Press
adjustment”.
/
to select “Volume” or “Auto
a b
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
For “Volume”, press c/d to set the default
volume.
For “Auto adjustment”, press c/d to select
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
“On” or “Off”.
Press MENU to exit.
6
Press MENU to exit.
5
NOTE
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 4, and then
press ENTER.
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 3.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for ONCOMMAND users
Label Input
CH Re-Map
You can assign a label to each input source and
channel.
Sets the channel order (logical channel) to your
preferred order.
Press MENU and the MENU screen displays.
1
Press
/
to select “PPV TV”.
c d
2
3
4
5
Press
press ENTER.
/
to select “Label Input”, and then
a b
Press MENU and the MENU screen displays
1
Press
/
to select the desired input source,
a b
and then press ENTER
Press
Press
/
to select “PPV TV”.
c d
2
3
4
For “INPUT 1” to “INPUT 6”:
Press
/
/
/
and ENTER to select
1
a b c d
/
to select “CH Re-Map”, and then
a b
each character of the new name for the
input source.
press ENTER.
Press
/
/
/
to select “END”, and
2
a b c d
Press
ENTER.
/
to select “CH Set”, and then press
a b
then press ENTER to complete the
labeling.
For “TV”:
Press
/
/
/
to select the Logical CH you
a b c d
5
6
Press
/
to select “Air” or “Cable”, and
b
want to set, and then press ENTER.
1
c d
then press
to move down.
Press
/
to select “ANALOG” , “DIGITAL”
a b
Press
/
to select the channel number
2
c d
or the desired input source, and then press
you want to label, and then press
move down.
to
b
ENTER.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
• Select “Reset” for resetting the channel to the
factory preset value.
• The channel number is based on the physical
number, and it may be different from the
displayed channel number specified by the
hotel server.
Select “Select”, and then press ENTER.
3
4
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Press
/
/
/
and ENTER to select
a b c d
each character of the new name for the
channel.
Press 0
2
2
0
1
ENTER
s s s s s
Press
/
/
/
to select “END”, and
5
a b c d
Repeat the steps 5 and 6 until all desired logical
channels are set.
then press ENTER to complete the
7
8
labeling.
Press MENU to exit.
Press MENU to exit.
6
NOTE
• For resetting all logical channels to the factory preset
NOTE
• Depending on the system version, you can assign a label
using the hotel server.
• When you change the input name for “INPUT 1” through
“INPUT 6” in the Label Input setting, the input name
you have labeled will not change even if you change the
Language setting.
values, select “CH Reset All” in step 4, press
/
to
c d
select “Yes”, and then press ENTER.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for ONCOMMAND users
View Mode
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
You can set the picture size for when the TV is turned
on.
Press VIEW MODE.
• The View Mode menu displays.
1
When you are finished setting the menu
items, perform steps 3 to 8 on page 7
to complete the storing and transferring
of the data to the TV
Press VIEW MODE or
Mode menu is still on the screen.
• You can sequentially select a View Mode that has
its own aspect ratio.
/
while the View
a b
2
View Mode
Side Bar
S. Stretch
Zoom
Stretch
Side Bar:
Suitable for viewing
conventional 4:3 programs in
their normal format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing wide-
screen 2.35:1 anamorphic
DVDs in full screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen.
NOTE
• Some ONCOMMAND PPV systems are not compatible
with changing the View Mode. Confirm that your system
is compatible with a View Mode before you set it. If your
system is not compatible with the desired mode, set the
View Mode default setting to “S.Stretch”.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for NXTV users
For quick setup, use the remote control unit to perform
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
Default Channel
Sets the default channel.
in the MASTER mode.
Repeat steps 1 and 2 in PPV System.
1
PPV TV
TV Mode
[PPV TV]
[NXTV]
[2]
Press
/
to select “Default Channel”, and
a b
2
3
4
PPV System
Default Channel
Default Volume
Room Mode
CH Re-Map
Reset
then press ENTER.
Press to select “Analog/Digital”, and
then press ENTER.
/
a b
[20]
Press to select “Analog” or “Digital”, and
then press ENTER.
/
c d
Press
then press ENTER.
/
to select “Analog” or “Digital”, and
a b
5
6
PPV System
Input the default channel number by using
0 – 9, and then press ENTER.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
Sets the Pay Per View system.
Press MENU to exit.
7
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).
Press MENU and the MENU screen displays.
1
Press
Press
/
to select “PPV TV”.
c d
2
3
/
to select “PPV System”, and then
a b
press ENTER.
Press
/
to select “NXTV”, and then press
a b
4
ENTER.
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for NXTV users
Default Volume
Room Mode
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
Repeat steps 1 and 2 in Default Volume.
1
Press
/
to select “Room Mode”, and then
a b
2
3
4
press ENTER.
Press
then press ENTER.
/
to select the desired item, and
a b
For “Maximum Volume”, press
volume.
/
to set the
c d
For “R/C Buttons”, “TV Buttons” and “TV
INPUT Button”, press
/
to select
c d
Press MENU and the MENU screen displays.
“Respond” or “No Respond”, and then press
1
ENTER.
Press c/d to select “PPV TV”.
Selected item
Description
2
Maximum
Volume
Set the maximum volume in the
ROOM mode.
Press
/
to select “Default Volume”, and
a b
3
4
then press ENTER.
R/C Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
Press to select “Volume” or “Auto
/
a b
adjustment”.
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
For “Volume”, press
volume.
For “Auto adjustment”, press
“On” or “Off”.
/
to set the default
c d
5
/
to select
c d
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
Press MENU to exit.
6
Press MENU to exit.
NOTE
5
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 4, and then
press ENTER.
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV.
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 3.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for NXTV users
CH Re-Map
View Mode
Sets the channel order (logical channel) to your
preferred order.
You can set the picture size for when the TV is turned
on.
Press VIEW MODE.
• The View Mode menu displays.
1
Press VIEW MODE or
/
while the View
a b
2
Mode menu is still on the screen.
• You can sequentially select a View Mode that has
its own aspect ratio.
Press MENU and the MENU screen displays.
View Mode
Side Bar
S. Stretch
Zoom
1
Press
Press
/
to select “PPV TV”.
c d
2
/
to select “CH Re-Map”, and then
a b
Stretch
3
press ENTER.
Press
/
to select “CH Set”, and then press
a b
Side Bar:
4
5
6
ENTER.
Suitable for viewing
conventional 4:3 programs in
their normal format.
Press
/
/
/
to select the Logical CH you
a b c d
want to set, and then press ENTER.
Press
/
to select “ANALOG” , “DIGITAL”
a b
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
or the desired input source, and then press
ENTER.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
• Select “Reset” for resetting the channel to the
factory preset value.
Zoom:
Suitable for viewing wide-
screen 2.35:1 anamorphic
DVDs in full screen.
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Press 0
2
2
0
1
ENTER
s s s s s
Repeat the steps 5 and 6 until all desired
logical channels are set.
7
8
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen.
Press MENU to exit.
NOTE
• For resetting all logical channels to the factory preset
values, select “CH Reset All” in step 4, press
select “Yes”, and then press ENTER.
/
to
c d
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
When you are finished setting the menu
items, perform steps 3 to 8 on page 7
to complete the storing and transferring
of the data to the TV.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for nSTREAMS users
For quick setup, use the remote control unit to perform
Selected item
Description
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
Language
You can select a language from
English, French and Spanish for On
Screen Display. (See page 30.)
PPV TV
View Mode
You can select the screen size.
(See page 30.)
TV Mode
[PPV TV]
PPV System
[nSTREAMS]
Input Select
You can select the input source.
(See page 30.)
Function Menu Setup
Default Channel
Default Volume
Room Mode
[2]
Parental CTRL
You can set the secret number.
(See pages 62 to 67.)
[20]
Press MENU to exit.
4
CH Re-Map
Reset
NOTE
• Parental CTRL setting from the hotel server has priority
over the TV setting.
PPV System
Sets the Pay Per View system.
Default Channel
Sets the default channel.
Repeat steps 1 and 2 in PPV System.
1
Press
/
to select “Default Channel”, and
a b
2
3
4
5
6
then press ENTER.
Press to select “Analog/Digital”, and
then press ENTER.
/
a b
Press MENU and the MENU screen displays.
1
Press to select “Analog” or “Digital”, and
then press ENTER.
/
c d
Press
/
to select “PPV TV”.
c d
Press
then press ENTER.
/
to select “Analog” or “Digital”, and
a b
2
3
Press a/b to select “PPV System”, and then
press ENTER.
Input the default channel number by using 0 –
9, and then press ENTER.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
Press a/b to select “nSTREAMS”, and then
press ENTER.
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
4
Press MENU to exit.
7
Function Menu Setup
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).
You can select the menu items to display on the
Function menu. (See page 30.) The Function menu can
be displayed by pressing the FUNCTION button on the
nSTREAMS remote control unit.
Repeat steps 1 and 2 in PPV System.
1
Press
/
to select “Function Menu Setup”,
a b
2
3
and then press ENTER.
Press to select the desired item, and
then press ENTER to select “On” or “Off”.
/
a b
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for nSTREAMS users
Default Volume
Room Mode
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
previously used volume setting.
Repeat steps 1 and 2 in Default Volume.
1
Press
/
to select “Room Mode”, and then
a b
2
3
4
press ENTER.
Press
then press ENTER.
/
to select the desired item, and
a b
For “Maximum Volume”, press
volume.
/
to set the
c d
For “R/C Buttons”, “TV Buttons” and “TV
Press MENU and the MENU screen displays.
1
INPUT Button”, press
/
to select
c d
“Respond” or “No Respond”, and then press
ENTER.
Press
Press
/
to select “PPV TV”.
c d
2
3
Selected item
Description
/
to select “Default Volume”, and
a b
Maximum
Volume
Set the maximum volume in the
ROOM mode.
then press ENTER.
Press
/
to select “Volume” or “Auto
a b
4
5
R/C Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
adjustment”.
For “Volume”, press
volume.
For “Auto adjustment”, press
“On” or “Off”.
/
to set the default
c d
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
/
to select
c d
Press MENU to exit.
6
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
NOTE
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 4, and then
press ENTER.
Press MENU to exit.
5
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV.
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 3.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for nSTREAMS users
View Mode
CH Re-Map
You can set the picture size for when the TV is turned
on.
Sets the channel order (logical channel) to your
preferred order.
Press VIEW MODE.
• The View Mode menu displays.
1
Press VIEW MODE or
/
while the View
a b
2
Mode menu is still on the screen.
• You can sequentially select a View Mode that has
its own aspect ratio.
Press MENU and the MENU screen displays.
View Mode
Side Bar
S. Stretch
Zoom
1
Press
Press
/
to select “PPV TV”.
c d
2
3
4
5
6
/
to select “CH Re-Map”, and then
a b
Stretch
press ENTER.
Press
/
to select “CH Set”, and then press
a b
ENTER.
Side Bar:
Suitable for viewing
conventional 4:3 programs in
their normal format.
Press
/
/
/
to select the Logical CH you
a b c d
want to set, and then press ENTER.
Press
/
to select “ANALOG” , “DIGITAL”
a b
or the desired input source, and then press
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
ENTER.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
• Select “Reset” for resetting the channel to the
factory preset value.
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Zoom:
Suitable for viewing wide-
screen 2.35:1 anamorphic
DVDs in full screen.
Press 0
2
2
0
1
ENTER
s s s s s
Repeat the steps 5 and 6 until all desired
logical channels are set.
7
8
Stretch:
This mode is useful for 1.78:1
DVDs.
Press MENU to exit.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen.
NOTE
• For resetting all logical channels to the factory preset
values, select “CH Reset All” in step 4, press
/
to
c d
select “Yes”, and then press ENTER.
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
When you are finished setting the menu
items, perform steps 3 to 8 on page 7
to complete the storing and transferring
of the data to the TV.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for SeaChange users
For quick setup, use the remote control unit to perform
Default Channel
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
Sets the default channel.
Repeat steps 1 and 2 in PPV System.
1
PPV TV
TV Mode
[PPV TV]
[SeaChange]
[2]
Press a/b to select “Default Channel”, and
2
3
4
5
6
PPV System
Default Channel
Default Volume
Room Mode
CH Re-Map
Reset
then press ENTER.
Press
/
to select “Analog/Digital”, and
a b
[20]
then press ENTER.
Press to select “Analog” or “Digital”, and
/
c d
then press ENTER.
Press
/
to select “Analog” or “Digital”, and
a b
then press ENTER.
PPV System
Input the default channel number by using
0 – 9, and then press ENTER.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
Sets the Pay Per View system.
Press MENU to exit.
7
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).
Press MENU and the MENU screen displays.
1
Press
Press
/
to select “PPV TV”.
c d
2
3
/
to select “PPV System”, and then
a b
press ENTER.
Press
/
to select “SeaChange”, and then
a b
4
press ENTER.
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for SeaChange users
Default Volume
Room Mode
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
Repeat steps 1 and 2 in Default Volume.
1
Press
/
to select “Room Mode”, and then
a b
2
3
4
press ENTER.
Press
then press ENTER.
/
to select the desired item, and
a b
For “Maximum Volume”, press
volume.
/
to set the
c d
For “R/C Buttons”, “TV Buttons” and “TV
INPUT Button”, press
/
to select
c d
Press MENU and the MENU screen displays.
1
“Respond” or “No Respond”, and then press
ENTER.
Press
Press
/
to select “PPV TV”.
c d
2
3
Selected item
Description
Maximum
Volume
Set the maximum volume in the
ROOM mode.
/
to select “Default Volume”, and
a b
then press ENTER.
R/C Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
Press
/
to select “Volume” or “Auto
a b
4
5
adjustment”.
For “Volume”, press c/d to set the default
volume.
For “Auto adjustment”, press c/d to select
“On” or “Off”.
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
Press MENU to exit.
6
NOTE
Press MENU to exit.
5
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 4, and then
press ENTER.
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV.
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 3.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick setup for SeaChange users
View Mode
CH Re-Map
You can set the picture size for when the TV is turned
on.
Sets the channel order (logical channel) to your
preferred order.
Press VIEW MODE.
• The View Mode menu displays.
1
Press VIEW MODE or
/
while the View
a b
2
Mode menu is still on the screen.
• You can sequentially select a View Mode that has
its own aspect ratio.
Press MENU and the MENU screen displays.
View Mode
Side Bar
S. Stretch
Zoom
1
Press
Press
/
to select “PPV TV”.
c d
2
3
4
5
6
/
to select “CH Re-Map”, and then
a b
Stretch
press ENTER.
Press
/
to select “CH Set”, and then press
a b
ENTER.
Side Bar:
Suitable for viewing
conventional 4:3 programs in
their normal format.
Press
/
/
/
to select the Logical CH you
a b c d
want to set, and then press ENTER.
Press
/
to select “ANALOG” , “DIGITAL”
a b
or the desired input source, and then press
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
ENTER.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
• Select “Reset” for resetting the channel to the
factory preset value.
Zoom:
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Suitable for viewing wide-
screen 2.35:1 anamorphic
DVDs in full screen.
Press 0
2
2
0
1
ENTER
s s s s s
Repeat the steps 5 and 6 until all desired
logical channels are set.
7
8
Stretch:
This mode is useful for 1.78:1
DVDs.
Press MENU to exit.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen.
NOTE
• For resetting all logical channels to the factory preset
values, select “CH Reset All” in step 4, press
/
to
c d
select “Yes”, and then press ENTER.
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
When you are finished setting the menu
items, perform steps 3 to 8 on page 7
to complete the storing and transferring
of the data to the TV.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Replicator
Part names
1
1
2
3
4
5
6
7
LEARN indicator: Lights up while storing the TV
settings from the TV to the Remote Replicator.
DONE indicator: Lights up when storing or
transferring is finished.
TEACH indicator: Lights up while transferring the
TV settings from the Remote Replicator to the TV.
MEMORY SELECT indicator: Indicates which
memory bank is selected.
LEARN button: Store the TV settings from the TV
to the Remote Replicator.
TEACH button: Transfer the TV settings from the
Remote Replicator to the TV.
ROOM button: The TV turns off and enters the
ROOM mode when the TV is in the MASTER
mode. You can turn on or off the TV when the TV
is in the ROOM mode.
2
3
5
6
7
8
9
10
4
8
MASTER button: The TV is turned on and enters
the MASTER mode when the TV is turned off. The
menu screen displays when the TV is turned on in
the MASTER mode or the ROOM mode. The TV is
turned off and enters the PPV TV mode when the
TV is in the Normal TV mode.
9
DIAGNOSTICS button: Perform operational tests.
10 MEMORY SELECT button: Select the memory
11
bank to store or transfer data.
11 TRANSPORT (RJ-11) connector: Connect to the
TV when storing or transferring the data.
NOTE
• When using the Remote Replicator, point it at the TV.
• The TRANSPORT (RJ-11) connector is designed for hotel
communication. Do not use it for other purposes.
Inserting the battery
1
Open the battery cover.
2
Attach a commercially
available 9V battery.
3
Insert the battery.
4
Close the battery cover.
• Connect the
battery to the battery connector of
the Remote Replicator.
/
terminals of the
e f
NOTE
• See page 32 for the details on the Remote Replicator and
the battery.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Replicator
Storing the settings from the TV
Storing the settings from the TV
(for NXTV users only)
Connect the TRANSPORT (RJ-11) connector
1
of the Remote Replicator to the TRANSPORT
Press MASTER to turn on the TV in the
terminal of the TV (TV with the master settings)
with the supplied RJ-11 cable.
1
MASTER mode.
Press MEMORY SELECT to select the
Press TEACH.
• A message appears, and then disappears in a few
seconds.
2
2
memory bank.
Press LEARN.
• When the TV is off, the TV will not respond when
LEARN is pressed.
3
Repeat steps 1 to 5 in Storing the settings
from the TV.
• When you connect the Remote Replicator to the
TV, use the supplied RJ-11 cable, not the cable
connected to the PPV terminal box.
3
The data transfer process is displayed on the screen.
4
The DONE indicator lights up and a message
Transferring the settings to the TV
(for NXTV users only)
5
is displayed on the screen after the data
storage is complete.
Press MASTER to turn on the TV in the
Transferring the settings to the TV
Connect the TRANSPORT (RJ-11) connector
1
MASTER mode.
1
Press TEACH.
• A message appears, and then disappears in a few
seconds.
of the Remote Replicator to the TRANSPORT
2
terminal of the TV (TV to be cloned) with the
supplied RJ-11 cable.
Press MEMORY SELECT to select the
memory bank.
Repeat steps 1 to 5 in Transferring the
settings to the TV.
2
3
• When you connect the Remote Replicator to the
TV, use the supplied RJ-11 cable, not the cable
connected to the PPV terminal box.
Press TEACH.
3
• When the TV is off, the TV will not respond when
TEACH is pressed.
Configuration memory banks
The data transfer process is displayed on the
4
Three different full TV configuration setups can be
stored in the Remote Replicator simultaneously.
This allows different TV configurations to be taught to
different TVs without having to perform the learning
procedure over again.
screen.
The DONE indicator lights up and a message
5
is displayed on the screen after the data
transfer is complete.
NOTE
Press MEMORY SELECT.
1
• After performing TEACH while in Normal TV Mode, wait
until the power is completely off. To turn the power on
again after performing TEACH, wait approximately 15
seconds after the TV enters Standby Mode (dark screen).
Then turn the power on.
Each time you press MEMORY SELECT, the
2
MEMORY SELECT indicator switches between
memory banks.
DIAGNOSTICS mode (PPV TV only)
Press DIAGNOSTICS to perform the operational tests
as shown below.
— Checks the connection between the TV and the PPV
terminal box
— Displays the software version
— Switches to the default channel
NOTE
• When the TV is off, the TV will automatically turn on and
display the result of test after pressing DIAGNOSTICS.
• DIAGNOSTICS mode is not available for NXTV users.
• Cannot be used while in Normal TV Mode.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Replicator
NOTE
Notes on using the Remote
Replicator while in Normal TV
Mode
• The data from performing LEARN while in Normal TV Mode
cannot be used when performing TEACH while in PPV TV
Mode. Perform TEACH after switching to Normal TV Mode.
(Also, data in the Remote Replicator from performing
LEARN while in PPV TV Mode cannot be used when
performing TEACH while in Normal TV Mode. Perform
TEACH after switching to PPV TV Mode.)
• Select TV Mode as the viewed Input Source when
performing LEARN/TEACH while in Normal TV Mode.
(When viewing the Input 1-5 external input mode, LEARN/
TEACH cannot be performed.)
• When LEARN/TEACH is performed in Normal TV Mode, the
analog and digital (Air, Cable) channel lists will be copied.
Channel SKIP settings will also be copied.
For digital channel lists, the maximum number of channels
that can be copied is 300.
(The channels made available from Channel Search or
tuning channels in the source TV of the copied channel list
will all be copied. After copying, all the channels that could
be tuned in the source TV will be tunable.)
• There are some menu setting parameters that cannot be
copied. Fine Sync. Adjustment (page 53), Input Signal (page
59), Audio only (page 58), and AV Mode User (page 59)
setting parameters cannot be copied.
(Amongst the User settings, the currently viewed Input
Source parameters can be copied.)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Other settings for the PPV TV mode
Reset
PPV TV menu
All of the TV settings such as “Picture”, “Audio” and
The PPV TV menu displays when MENU on the remote
control unit is pressed, and the TV is in the PPV TV
mode.
See below for “TV Mode”, and see page 9 to 25 for the
other menu items.
“Input Label” will return to the factory presets after
performing “Reset” in the PPV TV mode. The Remote
Replicator only stores the TV settings that differ from
the factory presets. To transfer the data to other
TVs faster, perform “Reset”, and then set up the TV
settings.
TV Mode
Repeat steps 1 and 2 in TV Mode.
Sets the TV to the Normal TV mode.
1
Press
/
to select “Reset”, and then press
to select “Yes”, and then press
a b
2
ENTER.
Press
ENTER.
/
c d
3
4
Press MENU to exit.
Press MENU and the MENU screen displays.
1
Press
/
to select “PPV TV”.
c d
2
PPV TV
TV Mode
PPV System
[PPV TV]
[LODGENET]
Function Menu Setup
Default Channel
Default Volume
Room Mode
[2]
[20]
CH Re-Map
Reset
Press
/
to select “TV Mode”, and then
a b
3
4
press ENTER.
Press
press ENTER.
/
to select “Normal TV”, and then
c d
• When you select “Normal TV”, enter “2433” for the
password, and then the TV will automatically turn
off after the message. The TV enters the Normal
TV mode when it is turned on again.
Selected item
PPV TV
Description
Sets and adjusts the TV, and
communicates with the PPV terminal
box.
Normal TV
NOTE
Functions as a normal TV.
• Press MASTER or ROOM on the Remote Replicator to
return to the PPV TV mode from the Normal TV mode
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Other settings for the PPV TV mode
Function menu (for LODGENET
and nSTREAMS users only)
Option menu (for LODGENET and
nSTREAMS users only)
You can display the Function menu by pressing the
FUNCTION button on the LODGENET or nSTREAMS
remote control unit. The Function menu items
displayed such as “Parental CTRL”, “Language”, “View
Mode” and “Input Select” depend on the Function
Menu Setup.
You can display the Option menu by pressing the
FUNCTION button on the LODGENET or nSTREAMS
remote control unit when the TV is connected to a
PC-IN equipment and “INPUT6” is selected from the
INPUT SOURCE menu (see page 52).
Use the LODGENET or nSTREAMS remote control unit
for the following operations.
Use the LODGENET or nSTREAMS remote control unit
for the following operations.
Press FUNCTION to display the Option menu.
1
Press FUNCTION to display the Function
menu.
1
Press
/
to select “Option”.
c d
2
Press
/
to select “Function”.
c d
2
Option
Function
Input Signal
Auto Sync.
[1024g768]
Sleep Timer
[Off]
Parental CTRL
Closed Caption
Language
Press
/
to select the desired menu item,
a b
3
4
[--]
[English]
and then press SELECT.
Perform the steps below for each item.
View Mode
[S.Stretch]
Input Select
Press
/
to select the desired menu item,
a b
Selected item
Input Signal
Description
3
4
and then press SELECT.
Press a/b to select the desired input
signal, and then press SELECT.
• The items in the Function menu depend on the
Function Menu Setup.
Perform the steps below for each item.
Auto Sync.
Press c/d to select “Yes”, and then
press SELECT.
Press FUNCTION to exit.
5
Selected item
Sleep Timer
Description
Press
/
to select the desired
setting, and then press SELECT.
a b
NOTE
• “Input Signal” and “Auto Sync.” are grayed out when “Input
Select” is set to “DIGITAL”.
Parental CTRL
Closed Caption
See pages 62 to 67.
Press SELECT to select the desired
setting.
Language
Press a/b to select the desired
language, and then press SELECT.
View Mode
Input Select
Press a/b to select the desired screen
size, and then press SELECT.
Press a/b to select the desired input
source, and then press SELECT.
Press FUNCTION to exit.
4
NOTE
• Parental CTRL may not be available when the hotel server
commands not to display the Parental CTRL menu.
• Sleep Timer and Parental CTRL settings are effective for 24
hours. The other settings will be canceled when the TV is
turned off.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control unit
1
TV POWER: Switches the TV power on or enters
standby. (See page 35.)
Part names
2
3
DISPLAY: Displays the channel information.
1
14
SOURCE POWER: Turns the power of the external
equipment on and off.
4
External equipment operational buttons: Operates
the external equipment.
5
6
7
0 – 9: Sets the channel. (See page 37.)
2
3
• (DOT): (See pages 37 and 70)
INPUT: Selects a TV input source. (TV, INPUT 1, INPUT 2,
INPUT 3, INPUT 4, INPUT 5, INPUT 6) (See pages 51.)
15
16
8
9
VOL
/
: Sets the volume. (See page 38.)
k l
4
SURROUND: Selects Surround settings. (See page 38.)
10 FREEZE: Sets the still image. Press again to return to
normal screen. (See page 68.)
11 EXIT: Turns off the menu screen.
12 SLEEP: Sets the sleep timer. (See page 55.)
5
13 AUDIO: Selects the MTS/SAP or the audio mode during
multi-channel audio broadcasts. (See page 39.)
14 FUNCTION: Switches the remote control unit for TV,
CBL/SAT, VCR, DVD and AUDIO operation. Indicator
lights up for the current mode. (See pages 68 to 71 for
details.)
6
7
17
18
* To enter the code registration mode, you need to press
FUNCTION and DISPLAY at the same time.
15 LIGHT : When pressed all buttons on the remote
D
8
9
19
20
control unit will light. The lighting will turn off if no
operations are performed within about 5 seconds. This
button is used for performing operations in low-light
situations.
10
21
22
16 VIEW MODE: Selects the screen size. (See pages 56
and 57.)
17 ENT: Jumps to a channel after selecting with the 0–9
buttons.
18 FLASHBACK: Returns to the previous channel or
11
23
24
external input mode. (See page 37.)
19 CH
/
: Selects the channel. (See page 37.)
r s
20 MUTE: Mutes the sound. (See page 38.)
21 MENU: Displays the menu screen.
25
26
22
/
/
/
/ENTER: Selects a desired item on the
a b c d
screen.
23 RETURN: Returns to the previous menu screen.
12
13
24 FAVORITE CH
A, B, C, D: Selects 4 preset favorite channels in 4
different categories. (See page 46 for details.)
27
While watching, you can toggle the selected channels by
pressing A, B, C and D.
25 FAVORITE: Set the favorite channels. (See page 46.)
26 CC: Displays captions from a closed-caption source. (See
page 60.)
27 AV MODE: Selects an audio or video setting.
(When the input source is TV, INPUT 1, 2 or 3:
STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed),
DYNAMIC. When the input source is INPUT 4, 5 or 6:
STANDARD, MOVIE, GAME, PC, USER, DYNAMIC
(Fixed), DYNAMIC) (See page 59.)
NOTE
• When using the remote control unit, point it at the TV.
• The buttons on the remote control unit may not function
depending on the Room Mode setting. (See page 6.)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control unit
Inserting the batteries
If the remote control unit fails to operate TV functions, replace the batteries in the remote control unit.
1
Open the battery cover.
2
Insert two “AAA” size batteries
(supplied with the product).
3
Close the battery cover.
• Place the batteries with their terminals
corresponding to the ( ) and (
)
f
e
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a
rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
Using the remote control unit
Use the remote control unit (Remote Replicator) by pointing it towards the remote
control sensor on the TV. Objects between the remote control unit (Remote
Replicator) and the remote control sensor may prevent proper operation.
Cautions regarding the remote control unit
• Do not expose the remote control unit (Remote Replicator) to shock. In addition, do not
expose the remote control unit (Remote Replicator) to liquids, and do not place in an
area with high humidity.
• Do not install or place the remote control unit (Remote Replicator) under direct sunlight.
The heat may cause deformation of the remote control unit (Remote Replicator).
• The remote control unit (Remote Replicator) may not work properly if the remote control
sensor on the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit (Remote Replicator)
closer to the remote control sensor.
17n(5 m)
17 (5 m)
n
Remote control
sensor
Remote control
sensor
15°
15°
30°
30°
Remote Replicator
Remote control unit
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
You can connect many types of external equipment
to your TV like a Blu-ray disc player, HD-DVD player,
DVD player, VCR, Digital TV tuner, HDMI equipment,
game console or camcorder. To view external source
images, select the input source from INPUT on the
remote control unit or on the TV. (See pages 51 and
52.)
Connecting a VCR, game console
or camcorder
A VCR, game console, camcorder and other
audiovisual equipment can be conveniently connected
using the INPUT 1 to 3 terminals.
When using S-VIDEO cable (commercially
available).
CAUTION
• To protect equipment, always turn off the TV before
connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc
player, etc.) carefully before making connections.
• If your Blu-ray disc player offers a choice of output formats,
please select 720p for use with this TV.
Connecting a Blu-ray disc player,
HD-DVD player, DVD player or a
Digital TV STB (Air or Cable)
You can use the INPUT 1, INPUT 2 or INPUT 3
terminals when connecting to a Blu-ray disc player,
HD-DVD player, DVD player, a Digital TV STB (Air or
Cable) and other audiovisual equipment.
VCR/Game console/
Camcorder
When using composite cable
(commercially available).
When using composite cable
(commercially available).
VCR/Game console/
Camcorder
Blu-ray disc player/
HD-DVD player/ DVD
player/Digital TV STB
NOTE
• The S-VIDEO terminal takes priority over the video
terminals. (INPUT 2 only for LC-32HT2U/LC-37HT3U,
INPUT3 only for LC-42HT3U)
When using component cable. (INPUT 1 or 2 (LC-
42HT3U only))
Using Digital Audio Output
It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. (See page 50 for details.)
PCM audio outputs from the terminal.
Audio cable
(commercially
available)
External
audio
devices
Component video cable
(commercially available)
Optical fiber cable
(commercially available)
Blu-ray disc player/HD-DVD
player/ DVD player/Digital TV STB
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Connecting HDMI equipment
You can use the INPUT 4 or INPUT 5 terminal when connecting HDMI equipment.
HDMI cable
(commercially available)
HDMI equipment
NOTE
• When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5.
• When receiving an incompatible signal, such as 1080p, the message below appears without the image on the screen.
For an incompatible video signal: “An incompatible video signal has been received. Check the output device settings.”
For an incompatible audio signal: “An incompatible audio signal has been received. Check the output device settings.”
Connecting a PC
When connecting to a PC with an analog RGB terminal. (INPUT 6)
RGB cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
PC
When connecting to a PC with an HDMI terminal. (INPUT 4 or 5)
HDMI cable
(commercially available)
PC
NOTE
• The HDMI terminals only support digital signal.
PC compatibility chart
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 59 to set PC input signals.
PC
Resolution
720 x 400
Horizontal Frequency
Vertical Frequency
VESA Standard
31.5 kHz
70 Hz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
O
O
O
O
O
O
O
O
O
O
O
VGA
640 x 480
SVGA
800 x 600
PC
XGA
1024 x 768
1360 x 768
WXGA
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
See page 29 to switch the TV to the Normal TV mode.
Simple operations for watching a TV program
Turning on the power
Press POWER on the TV, or TV POWER on the
remote control unit.
• POWER indicator (Green): The TV is on. (After a few
seconds, a window appears with sound.)
NOTE
• The initial setup starts after the TV is switched from the
PPV TV mode to the Normal TV mode. See page 44 for
performing EZ Setup from the Setup menu.
POWER
• Depending on the Room Mode setting (see pages 11, 14,
18, 21 and 24), press MASTER or ROOM on the Remote
Replicator to turn on the TV.
Turning off the power
Press POWER on the TV, or TV POWER on the
remote control unit.
• The TV enters standby and the image on the screen
disappears.
• The POWER indicator on the TV turns off.
POWER indicator
SLEEP indicator
OPC indicator
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the power outlet.
• Weak electric power is still consumed even when POWER
is turned off.
TV POWER (On/Standby)
• Depending on the Room Mode setting (see pages 11, 14,
18, 21 and 24), press MASTER or ROOM on the Remote
Replicator to turn off the TV.
TV status indicator (POWER)
ON
Lighting (Green)
Lights off
OFF/Standby
TV status indicator (OPC)
“Off” is selected in OPC setting
Lights off
“On” or “On: Display” is selected in OPC setting
• See page 47 for details.
Lighting (Green)
TV status indicator (SLEEP)
“Off” is selected in SLEEP setting
Lights off
“30”, “60”, “90” or “120” is selected in SLEEP setting
• See page 55 for details.
Lighting (Red)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Initial setup
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live.
Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 32.)
2. Connect the antenna cable to the TV. (See page 15 of the operation manual for the LC-32HT3U/LC-37HT3U/LC-42HT3U.)
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area..
When “Air” is selected in Antenna setting:
3
Press
/
to select “Start”, and then press
c d
ENTER.
Language
Air/Cable
CH Search
Language setting
Select from among 3 languages: English, French and
Spanish.
Start
Cancel
Press
/
to select the desired language
a b
1
listed on the screen, and then press ENTER.
When “Cable” is selected in Antenna setting:
Press to select “Analog & Digital Search
Language
/
a b
Air/Cable
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
CH Search
English
Français
Español
Language
Air/Cable
CH Search
Analog & Digital Search Start
Analog Search Start
Cancel
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air” or “Cable”.
Press
/
to select “Air” or “Cable”.
c d
2
Press ENTER to enter the setting.
• The Channel search will start automatically.
• To exit the Channel search screen, select “Cancel”,
and then press ENTER.
Example
Language
Air/Cable
CH Search
Example
CH Search
Air
Cable
Air [ 25 ]
Found [ 20 ]
Air
ANALOG
2
Audio
:
MONO
NOTE
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again. (See page 44.)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Method 1
Using CH
TV.
Simple button operations for
changing channels
/
on the remote control unit or on the
r s
You can change channels in several ways.
Method 2
Press FLASHBACK to switch to the previously tuned
1
channel.
Press FLASHBACK again to switch back to the currently
tuned channel.
2
NOTE
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5 ENT
s
Air
Air
ANALOG
5
5
NOTE
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1
1
5
s s
Cable
Cable
Cable
ANALOG
115
1
11
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2
2
• (DOT) ENT
1
s
s
s s
Air
Air
Air
Air
Air
DIGITAL
22.1
2
22
22.
22.1
NOTE
• When you enter 0–9 only, channel selection will be made if
there is no operation within a few seconds.
• If you push “0” by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0–9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
NOTE
• If you change the channel in the MASTER mode by using
0–9 on the remote control unit of LCD TV when the
TV is connected to the PPV terminal box, the terminal
transmission is used so the displayed channel number
will not match the inputted channel or channel may be
changed automatically.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Using MUTE on the remote control unit
Mutes the current sound output.
■
Simple button operations for
changing volume/sound
Changing the volume
■
You can change the volume on the TV or on the
remote control unit.
Press MUTE.
•
will be displayed on the screen for 30 minutes, and the
sound is silenced.
M
20
Mute
Using VOL
/
■
k l
• To increase the volume, press VOL
.
l
k
• To decrease the volume, press VOL
.
NOTE
Volume adjustment
• Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below.
— Mute will be canceled if you press VOL
/
or MUTE.
k l
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
20
Using SURROUND on the remote control unit
■
NOTE
• VOL
/
on the TV operates the same as VOL
/
on
l k
k l
the remote control unit.
Audio status
Output Select
Output device
Fixed
Variable sound
Variable
SURROUND produces Surround effect from the
speakers. Each time you press SURROUND, the
mode changes between On and Off.
Speaker
Mute
* When “Output Select” is set to “Variable”, the indicator on
the screen changes as shown below.
Surround sound options
On: Makes it possible to enjoy natural, realistic
surround sound.
Off: Outputs the normal sound.
20
Surround : Off
Surround : On
NOTE
• See page 58 for details on the Output Select function.
NOTE
• You can have the same settings by choosing “Surround”
on the menu items. (See page 49.)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Setting MTS/SAP stereo mode
Setting Digital broadcasting audio
mode
The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS). The TV
with MTS can receive mono sound, stereo sound and
Secondary Audio Programs (SAP). The SAP feature
allows a TV station to broadcast other information,
which could be audio in another language or something
completely different like weather information.
The types of audio transmitted in a digital broadcast
include SURROUND as well as MONO and STEREO.
In addition, it is possible for multiple audio tracks to
accompany a single video track.
Press AUDIO to toggle
between audio modes.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
Example: when receiving Digital broadcasting
Air
Air
Air
DIGITAL
2.2
Audio1
:
STEREO
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
DIGITAL
2.2
STEREO
Audio2
:
NOTE
• MTS only operates while in TV mode.
DIGITAL
You can change MTS as
shown below to match
the television broadcast
signal.
2.2
SURROUND
Audio3
:
Press AUDIO to toggle
between audio modes.
Examples: when receiving MTS and SAP
STEREO mode
MAIN SAP mode
k
Air
ANALOG
Air
ANALOG
2
2
MAIN
Audio
:
STEREO
Audio
:
Air
ANALOG
Air
ANALOG
2
2
SAP
Audio
:
MONO
Audio
:
STEREO SAP mode
k
MONO mode
Air
Air
Air
ANALOG
Air
ANALOG
2
2
Audio
Audio
Audio
:
ST(SAP)
Audio
:
MONO
ANALOG
2
:
SAP(ST)
ANALOG
2
:
MONO
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Menu operation buttons
On-Screen Display
Use the following buttons on the remote control to
operate the menu.
Example
Option
1
2
Audio Only
Digital Noise Reduction
Input Select
[Off]
[VIDEO]
[Fixed]
[Auto]
Output select
Color System
Caption Setup
3
4
Program Title Display
[No]
Item displayed in yellow
1
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for
this item.
Item in brackets
2
3
4
• This indicates the current setting for the item.
Item displayed in white
• This indicates an item can be selected.
Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why items cannot be
selected, but the main reasons are as follows:
— Nothing is connected to the selected input
terminal.
— The function is not compatible with the
current input signal.
NOTE
MENU:
Press to open or close the menu screen.
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
/
/
/
: Press to select a desired item on the
a b c d
screen or adjust a selected item.
ENTER:
Press to go to the next step or complete
the setting.
RETURN:
Press to return to the previous step.
ENTER
RETURN
MENU
: Select
: Enter
: Back
: Exit
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Icons
PPV TV
Indicates the menu item can be set or adjusted in the PPV menu.
NORMAL TV
Indicates the menu item can be set or adjusted in the Normal TV menu.
PPV TV
NORMAL TV
Indicates the menu item can be set or adjusted in both the PPV menu and Normal TV mode.
PPV TV mode menu items (for TV/INPUT 1/INPUT2/INPUT3)
PPV TV
Picture
Option
Digital Noise Reduction ............................................. Page 58
Color System .............................................................. Page 58
Caption Setup............................................................. Page 61
OPC.............................................................................. Page 47
Backlight ..................................................................... Page 47
Contrast ...................................................................... Page 47
Brightness .................................................................. Page 47
Color ........................................................................... Page 47
Tint .............................................................................. Page 47
Sharpness .................................................................. Page 47
Advanced
Digital Setup
Color Temp. .................................................... Page 48
Black ............................................................... Page 48
I/P Setting........................................................ Page 48
Film Mode ....................................................... Page 48
3D-Y/C ............................................................ Page 48
Monochrome................................................... Page 48
Range of OPC ................................................. Page 48
Reset................................................................ Page 47
Audio Setup................................................................. Page 50
PPV TV
TV Mode ...................................................................... Page 29
PPV System......................................... Pages 9, 13, 17, 20, 23
Function Menu Setup........................................... Pages 9, 20
Default Channel................................ Pages 10, 13, 17, 20, 23
Default Volume ................................ Pages 10, 14, 18, 21, 24
Room Mode....................................... Pages 11, 14, 18, 21, 24
Label Input .................................................................. Page 15
CH Re-Map........................................ Pages 11, 15, 19, 22, 25
Reset............................................................................ Page 29
Audio
Treble .......................................................................... Page 49
Bass............................................................................. Page 49
Balance........................................................................ Page 49
Surround...................................................................... Page 49
Reset............................................................................ Page 49
Power Control
For LODGENET and nSTREAMS users only
Function
No Signal Off............................................................... Page 50
No Operation Off ........................................................ Page 50
Sleep Timer................................................................. Page 30
Parental CTRL............................................................. Page 30
Closed Caption........................................................... Page 30
Language..................................................................... Page 30
View Mode................................................................... Page 30
Input Select ................................................................ Page 30
Setup
EZ Setup...................................................................... Page 44
CH Setup ..................................................................... Page 44
Antenna Setup-DIGITAL............................................. Page 45
Input Skip .................................................................... Page 52
Input Label ................................................................. Page 55
Position........................................................................ Page 54
Language..................................................................... Page 54
NOTE
• Some menu items may not be displayed depending on the selected PPV System.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
PPV TV mode menu items (for HDMI/PC-IN)
PPV TV
Picture
PPV TV
TV Mode ...................................................................... Page 29
PPV System......................................... Pages 9, 13, 17, 20, 23
Function Menu Setup........................................... Pages 9, 20
Default Channel................................ Pages 10, 13, 17, 20, 23
Default Volume ................................ Pages 10, 14, 18, 21, 24
Room Mode....................................... Pages 11, 14, 18, 21, 24
Label Input .................................................................. Page 15
CH Re-Map........................................ Pages 11, 15, 19, 22, 25
Reset............................................................................ Page 29
OPC.............................................................................. Page 47
Backlight ..................................................................... Page 47
Contrast ...................................................................... Page 47
Brightness .................................................................. Page 47
Color ........................................................................... Page 47
Tint .............................................................................. Page 47
Sharpness .................................................................. Page 47
Advanced
Color Temp. .................................................... Page 48
Black ............................................................... Page 48
I/P Setting......................................................... Page48
Film Mode ....................................................... Page 48
Monochrome................................................... Page 48
Range of OPC ................................................. Page 48
Reset................................................................ Page 47
For LODGENET and nSTREAMS users only
Function
Audio
Sleep Timer................................................................. Page 30
Parental CTRL............................................................. Page 30
Closed Caption........................................................... Page 30
Language..................................................................... Page 30
View Mode................................................................... Page 30
Input Select ................................................................ Page 30
Treble .......................................................................... Page 49
Bass............................................................................. Page 49
Balance........................................................................ Page 49
Surround...................................................................... Page 49
Reset............................................................................ Page 49
Power Control
Option
No Signal Off............................................................... Page 50
No Operation Off ........................................................ Page 50
Input Signal ................................................................. Page 30
Auto Sync.................................................................... Page 30
Setup
Input Skip .................................................................... Page 52
Input Signal ................................................................. Page 59
Auto Sync. .................................................................. Page 53
Input Label ................................................................. Page 55
Fine Sync. ................................................................... Page 53
Position........................................................................ Page 54
Language..................................................................... Page 54
Option
Digital Noise Reduction ............................................. Page 58
HDMI Setup................................................................. Page 52
NOTE
• Some menu items may not be displayed depending on the
selected PPV System.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
NORMAL TV
NORMAL TV mode menu items
For TV/INPUT 1/INPUT 2/INPUT 3
Picture
For HDMI/DVI
Picture
OPC.............................................................................. Page 47
Backlight ..................................................................... Page 47
Contrast ...................................................................... Page 47
Brightness .................................................................. Page 47
Color ........................................................................... Page 47
Tint .............................................................................. Page 47
Sharpness .................................................................. Page 47
Advanced
OPC.............................................................................. Page 47
Backlight ..................................................................... Page 47
Contrast ...................................................................... Page 47
Brightness .................................................................. Page 47
Color ........................................................................... Page 47
Tint .............................................................................. Page 47
Sharpness .................................................................. Page 47
Advanced
Color Temp. .................................................... Page 48
Black ............................................................... Page 48
I/P Setting........................................................ Page 48
Film Mode ....................................................... Page 48
Monochrome................................................... Page 48
3D-Y/C ............................................................ Page 48
Range of OPC ................................................. Page 48
Reset................................................................ Page 47
Color Temp. .................................................... Page 48
Black ............................................................... Page 48
I/P Setting........................................................ Page 48
Film Mode ....................................................... Page 48
Monochrome................................................... Page 48
Range of OPC ................................................. Page 48
Reset................................................................ Page 47
Audio
Audio
Treble .......................................................................... Page 49
Bass............................................................................. Page 49
Balance........................................................................ Page 49
Surround...................................................................... Page 49
Reset............................................................................ Page 49
Treble .......................................................................... Page 49
Bass............................................................................. Page 49
Balance........................................................................ Page 49
Surround...................................................................... Page 49
Reset............................................................................ Page 49
Power Control
Power Control
No Signal Off............................................................... Page 50
No Operation Off ........................................................ Page 50
No Signal Off............................................................... Page 50
No Operation Off ........................................................ Page 50
Setup
Setup
Input Skip .................................................................... Page 52
Input Signal ................................................................. Page 59
Auto Sync. .................................................................. Page 53
Input Label ................................................................. Page 55
Fine Sync. ................................................................... Page 53
Position........................................................................ Page 54
Language..................................................................... Page 54
Reset............................................................................ Page 54
EZ Setup...................................................................... Page 44
CH Setup ..................................................................... Page 44
Antenna Setup-DIGITAL............................................. Page 45
Input Skip .................................................................... Page 52
Input Label ................................................................. Page 55
Parental CTRL......................................................Pages 62-67
Position........................................................................ Page 54
Language..................................................................... Page 54
Reset............................................................................ Page 54
Option
Option
Audio Only................................................................... Page 58
Digital Noise Reduction ............................................. Page 58
HDMI Setup................................................................. Page 52
Output Select.............................................................. Page 58
Audio Only................................................................... Page 58
Digital Noise Reduction ............................................. Page 58
Input Select................................................................. Page 51
Output Select.............................................................. Page 58
Color System .............................................................. Page 58
Caption Setup............................................................. Page 61
Program Title Display ................................................ Page 58
Favorite CH ................................................................. Page 46
NOTE
• Some menu items may not be displayed depending on the
selected input source.
Digital Setup
Audio Setup................................................................. Page 50
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
PPV TV
NORMAL TV
PPV TV
NORMAL TV
EZ Setup
Channel Setup
You can run EZ Setup again, even after setting up the
preset channels.
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
Antenna setting
Press MENU to display the MENU screen, and
1
then press
/
to select “Setup”.
c d
Press MENU to display the MENU screen, and
1
then press
/
to select “Setup”.
c d
Press
/
to select “CH Setup”, and then
a b
2
press ENTER.
Press
/
to select “EZ Setup”, and then
a b
2
• If you already set the Secret No., input the 4-digit
secret number here. See page 40 for setting a
secret number.
press ENTER.
• If you already set the Secret No., go to step 3. If
not, skip to step 4.
Press
/
to select “Air/Cable”, and then
a b
Input the 4-digit secret number by using 0–9.
3
4
5
press ENTER.
3
4
Press
/
to select “Air” or “Cable”.
c d
Press
/
to select the desired language
a b
Press ENTER to enter the setting.
listed on the screen, and then press ENTER.
Press MENU to exit.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air” or “Cable”.
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
Press
/
to select “Air” or “Cable”.
c d
5
Press ENTER to enter the setting.
Repeat steps 1 and 2 in Antenna setting in
Channel Setup.
1
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
Press
/
to select “CH Search”, and then
a b
2
3
press ENTER.
When “Air” is selected in Antenna setting:
6
Press
/
to select “Start”, and then press
c d
When “Air” is selected in Antenna setting:
Press
ENTER.
ENTER.
/
to select “Start”, and then press
c d
When “Cable” is selected in Antenna
setting:
When “Cable” is selected in Antenna
setting:
Press
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select “Cancel”,
and then press ENTER.
Press
/
to select “Analog & Digital Search
a b
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
/
to select “Analog & Digital Search
a b
• The Channel search will start automatically.
• To exit the Channel search screen, select “Cancel”,
and then press ENTER.
Press MENU to exit.
7
Press MENU to exit.
4
NOTE
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again.
• If you select “Analog Search Start” and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
• In the PPV TV mode, you need to perform EZ Setup when
the RF frequency setting for the channels that are the same
as the channel in the hotel server are changed.
NOTE
• If no channel is found, confirm the type of connection made
with your TV and try channel search again.
• If you select “Analog Search Start” and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
• In the PPV TV mode, you need to perform CH Setup when
the RF frequency setting for the channels that are the same
as the channel in the hotel server are changed.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Channel memory setting
Press
/
to select “Signal Strength”.
a b
3
4
• The signal strength of DIGITAL channel is
displayed. The signal information is based on the
current channel.
Press MENU to display the MENU screen, and
then press to select “Setup”.
1
2
/
c d
Signal Strength
Press
/
to select “CH Setup”, and then
a b
Channel Strength
press ENTER.
• If you already set the Secret No., input the 4-digit
secret number here. See page 62 for setting a
secret number.
Signal Strength
Current
0
Max
0
Press
/
to select “CH Memory”, and then
a b
3
4
press ENTER.
Press MENU to exit.
Press
/
to select ANALOG (Air), ANALOG
a b
(Cable), DIGITAL (Air) or DIGITAL (Cable), and
then press ENTER.
Channel Strength
The channel signal strength can also be checked
separately.
When viewing ANALOG broadcasts:
5
Press
/
to select the channel to skip,
1
c d
Repeat steps 1 and 2 in Signal Strength in
Antenna Setup - DIGITAL.
and then press
to move down.
b
1
Press
/
to select “On”, and then press
2
c d
ENTER.
Press
/
to select “Channel Strength”, and
a b
2
3
When viewing DIGITAL broadcasts:
Press to select the channel to skip,
then press ENTER.
/
1
a b
and then press
/
to select “On”.
c d
Input the 2-digit channel number to check the
signal strength of the selected channel.
• On: Skips channels. (Channel selection disabled using CH
.)
• Make sure the signal is strong enough for each
channel.
/
r s
• Off: Does not skip channels. (Channel selection enabled
using CH .)
Signal Strength
/
r s
Channel Strength
1 2 CH
Press MENU to exit.
6
Signal Strength
NOTE
Current
0
Max
0
• Make sure what kind of connection is made with your TV.
• “CH Memory” is not available in the MASTER mode.
PPV TV
NORMAL TV
Press MENU to exit.
Antenna Setup - DIGITAL
4
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the “Antenna Setup -
DIGITAL” screen.
NOTE
• This function is available for DIGITAL (Air) only.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press MENU to display the MENU screen, and
1
then press
/
to select “Setup”.
c d
Press
/
to select “Antenna Setup -
a b
2
DIGITAL”, and then press ENTER.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
NORMAL TV
Favorite channel setting
This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.
Using FAVORITE CH on the remote control unit
Select the channel you want to register as a
favorite channel.
1
Using Favorite CH on the menu screen
You can also set your favorite channels in “Option” on
the MENU screen.
Press FAVORITE.
2
Press
/
to select “Register”, and then
Select the channel you want to register as a
a b
3
4
1
press ENTER.
favorite channel.
Press
/
/
/
to select the position in the
a b c d
Press MENU to display the MENU screen, and
2
category, and then press ENTER to register.
then press
/
to select “Option”.
c d
Press
/
to select “Favorite CH”, and then
a b
3
4
5
press ENTER.
A
B
C
D
Air
3
Press
press ENTER.
/
to select “Register”, and then
a b
Press
/
/
/
to select the position in the
a b c d
category, and then press ENTER to register.
Press MENU to exit.
6
Deleting a favorite channel
Press FAVORITE and the favorite channel
1
2
screen displays.
Repeat steps 2 and 3 in Using Favorite CH
1
2
on the menu screen.
Press
/
to select “1 Data Clear”, and then
a b
press ENTER.
Press
/
to select “1 Data Clear”, and then
a b
• To delete all the favorite channels, select “All Data
Clear”, and then skip to step 4.
press ENTER.
• To delete all the favorite channels, select “All Data
Clear”, and then skip to step 4.
Press
/
/
/
to select the channel you
a b c d
3
want to delete, and then press ENTER.
Press
/
/
/
to select the channel you
a b c d
3
4
5
want to delete, and then press ENTER.
A
B
C
D
Press
/
to select “Yes”, and then press
c d
Air
Air
ENTER.
3
18
Air
10.1
Press MENU to exit.
Press
/
to select “Yes”, and then press
c d
4
ENTER.
Yes
No
A
B
C
D
Air
3
Air
10.1
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
PPV TV
NORMAL TV
Selected item
Backlight
button
button
d
c
Picture adjustments
The screen dims
The screen
brightens
Adjusts the picture to your preference with the
following picture settings.
Contrast
Brightness
Color
For less contrast
For more contrast
For less brightness For more brightness
For less color
intensity
For more color
intensity
Tint
Skin tones become Skin tones become
reddish greenish
Sharpness
For less sharpness For more sharpness
NOTE
Press MENU to display the MENU screen, and
1
• Select “Advanced” and then press ENTER to set “Color
Temp.”, “Black”, “I/P Setting”, “Film Mode”, “3D-Y/C”,
“Monochrome” or “Range of OPC”. See page 48.
then press
/
to select “Picture”.
c d
Press
item.
/
to select a specific adjustment
to adjust the item to the desired
a b
2
3
4
PPV TV
NORMAL TV
OPC setting
Press
level.
/
c d
Automatically adjusts the brightness of the screen.
Press MENU to display the MENU screen, and
then press
1
/
to select “Picture”.
c d
Press MENU to exit.
Press
Press
/
to select “OPC”.
a b
2
3
NOTE
• For resetting all Picture adjustment items to the factory
preset values, press to select “Reset”, press ENTER,
/
to select “On” or “On: Display”.
Description
c d
/
a b
press
/
to select “Yes”, and then press ENTER.
c d
Selected item
Off
Picture
Audio
The brightness is fixed at the value set
in “Backlight”.
OPC
Off
On
On : Display
b16
Backlight
Contrast
Brightness
Color
[b12] a16
On
Automatically adjusts
[b30]
0
b40
b30
b30
b30
b10
[
[
[
[
0] a30
0] a30
0] a30
b2] a10
On: Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
Tint
Sharpness
Advanced
Reset
Press MENU to exit.
4
NOTE
• When set to “On”, the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set to “On: Display”, OPC effect displays on the
screen while the OPC adjusts the screen brightness.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
PPV TV
NORMAL TV
PPV TV
NORMAL TV
Advanced picture adjustments
Film Mode (3:2 pull-down)
This TV provides various advanced functions for
optimizing the picture quality.
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
Press MENU to display the MENU screen, and
1
then press
/
to select “Picture”.
c d
Selected item
Description
Press
/
to select “Advanced”, and then
a b
On
Off
Detects, analyzes, converts film source
Normal viewing mode
2
3
press ENTER.
Press
/
to select a specific adjustment
a b
item, and then press ENTER.
NOTE
• You can select “Color Temp.”, “Black”, “I/P
Setting”, “Film Mode”, “3D-Y/C”, “Monochrome”,
or “Range of OPC”.
• “Film Mode” does not function when you set:
— the “AV Mode” to “Game” or
— the “I/P Setting” to “Fast”.
PPV TV
NORMAL TV
Press
/
(or
/
) to select the desired
a b
c d
3D-Y/C
4
5
parameter.
Provides high quality images with minimal dot crawl
and cross color noise.
• See the table for the selectable parameters.
Press MENU to exit.
Selected item
Slow
Description
For still images
PPV TV
NORMAL TV
Color Temperature
Standard
Fast
Normal adjustment
For moving images
For Game Mode
For a better white balance, use color temperature
correction.
Off (2D)
Selected item
Description
White with Bluish tone
NOTE
High
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
Mid-High
Middle
Mid-Low
Low
PPV TV
Monochrome
NORMAL TV
White with Reddish tone
For viewing a video in monochrome.
PPV TV
Black
NORMAL TV
Selected item
Description
For viewing in monochrome
Normal color
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
On
Off
Selected item
Description
For high detail in black portions
No adjustment
PPV TV
NORMAL TV
Range of OPC
On
Off
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
PPV TV
NORMAL TV
I/P Setting
can be set to a maximum of 16 and a minimum of
e
Converts input signals depending on the type of
images.
16.
f
Selected item
Max.
Description
15 through 16
Selected item
Fast
Description
f
f
e
Suitable for fast-moving images
Min.
16 through 15
e
Slow
Suitable for smooth images with low
amounts of flickers
NOTE
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
NOTE
• “I/P Setting” is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080I.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
•
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
PPV TV
NORMAL TV
PPV TV
NORMAL TV
Sound adjustment
Surround
You can adjust the sound quality to your preference
with the following settings.
Surround function allows you to enjoy realistic “live”
sound.
Press MENU to display the MENU screen, and
1
then press
/
to select “Audio”.
c d
Press
/
to select “Surround”, and then
a b
2
press ENTER.
Audio
Power Control
Treble
[ 0]
[ 0]
[ 0]
a15
a15
L
b15
b15
R
Press MENU to display the MENU screen, and
Bass
1
then press
/
to select “Audio”.
c d
Balance
Surround
Reset
Audio
Power Control
[Off]
Treble
[ 0]
[ 0]
[ 0]
a15
a15
L
b15
b15
R
Press
/
to select “On”, and then press
c d
3
4
ENTER.
Bass
Balance
Surround
Reset
Press MENU to exit.
[Off]
NOTE
Press
item.
/
to select a specific adjustment
to adjust the item to the desired
a b
• You can choose Surround by pressing SURROUND on
the remote control unit. (See page 38.)
• Audio menu is grayed out when Output Select is set to
“Variable”.
• For some discs, setup may be required on your DVD
player. In this case, please refer to the operation manual of
your DVD player.
2
3
Press
level.
/
c d
Selected item
Treble
button
button
d
c
For weaker treble
For weaker bass
For stronger treble
For stronger bass
Bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left speaker
Press MENU to exit.
4
NOTE
• Audio menu is grayed out when Output Select is set to
“Variable”.
• For resetting all Audio adjustment items to the factory
preset values, press
/
to select “Reset”, press ENTER,
a b
press
/
to select “Yes”, and then press ENTER.
c d
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
PPV TV
NORMAL TV
PPV TV
NORMAL TV
Power Control
Digital Setup
Power control setting allows you to save energy.
This setting allows you to optimize the settings of
Digital broadcasting.
No signal off
PPV TV
NORMAL TV
When set to “Enable”, the power will automatically shut
down if there is no signal for 15 minutes.
Audio Setup
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press MENU to display the MENU screen, and
1
then press
/
to select “Power Control”.
c d
Press
/
to select “No Signal Off”, and then
a b
2
3
press ENTER.
Press MENU to display the MENU screen, and
Press to select “Enable”, and then press
/
c d
1
then press
/
to select “Digital Setup”.
c d
ENTER.
Press
/
to select “Audio Setup”, and then
a b
2
3
press ENTER.
Press
/
to select “PCM” or “Dolby Digital”,
a b
Enable
Disable
and then press ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
PCM
Dolby Digital
Press MENU to exit.
4
NOTE
Selected item
PCM
Description
• “Disable” is the factory preset value.
• When a TV program finishes, this function may not operate.
The optical output terminal outputs audio
signal in PCM form. If your digital audio
system does not support Dolby Digital,
select “PCM”.
No operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Dolby Digital
The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces
sound from surround program of digital.
Press MENU to display the MENU screen, and
then press
1
/
to select “Power Control”.
c d
Press MENU to exit.
Press
/
to select “No Operation Off”, and
a b
4
2
3
then press ENTER.
Press
ENTER.
/
to select “Enable”, and then press
c d
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
4
NOTE
• “Disable” is the factory preset value.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
NORMAL TV
Displaying an external
Input Select
PPV TV
NORMAL TV
equipment image
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2 (LC-42HT3U
only), you may need to change the input signal type
setting on the “Input Select” menu.
To view external source images, select the input
source from INPUT on the remote control unit or on
the TV.
Press MENU to display the MENU screen, and
1
then press
/
to select “Option”.
c d
Press
/
to select “Input Select”, and then
a b
2
3
press ENTER.
Press
/
to select the signal type you want
a b
to set, and then press ENTER.
• If the selected signal type is incorrect, images are
not displayed or displayed without any color.
Auto
COMPONENT
VIDEO
Press MENU to exit.
• The setting is stored and can be selected on the
“INPUT SOURCE” menu.
4
Press INPUT.
• A list of selectable sources appears.
1
NOTE
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 or 2 (LC-42HT3U only) to Auto, the TV
will automatically select the input signal.
• Setting INPUT 1 or 2 (LC-42HT3U only) signal selection to
“Auto” when other equipment is connected will result in the
following connection priority.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
INPUT 1 or 2 (LC-42HT3U only):
COMPONENT VIDEO
VIDEO
1
2
Press INPUT again to select the input source.
• An image from the selected source automatically
displays.
2
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
/
.
a b
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
NOTE
• See pages 33 and 34 for external equipment connection.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
PPV TV
NORMAL TV
Displaying an image from
HDMI equipment
PPV TV
NORMAL TV
Input Skip
This setting allows you to skip the HDMI/PC-IN Input
on the Input Selection operation.
To watch an HDMI/PC-IN equipment image,
select “INPUT4” or “INPUT5” from “INPUT
SOURCE” menu using INPUT on the remote
control unit or on the TV.
1
Press MENU to display the MENU screen, and
1
then press
/
to select “Setup”.
c d
Press
/
to select “Input Skip”, and then
a b
INPUT SOURCE
TV
2
3
press ENTER.
Press
/
to select the Input (INPUT 4,
a b
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
INPUT 5 or INPUT 6) you wish to skip, and
then press ENTER.
Input 4 (HDMI)
Input 5 (HDMI)
Input 6 (RGB)
Yes
No
Press MENU to display the MENU screen, and
2
3
then press
/
to select “Option”.
c d
Press
/
to select “Yes”, and then press
c d
4
5
Press
/
to select “HDMI Setup”, and then
a b
ENTER.
press ENTER.
Audio Only
Press MENU to exit.
Digital Noise Reduction
HDMI Setup
[Low]
Output Select
[Fixed]
Press
/
to select the desired item, and
a b
4
5
then press ENTER.
Press
then press ENTER.
/
to select the desired setting, and
c d
HDMI
Selectable
items
Setup
Description
items
Auto View
Enable
Disable
Set whether or not to
use View Mode based
on signal recognition,
including an HDMI signal.
Audio
Select
Digital
Analog
Select “Digital” for an
audio signal via the HDMI
terminal. Select “Analog”
for an audio signal via the
R-AUDIO -L terminal.
Press MENU to exit.
6
NOTE
• Refer to your external equipment operation manual for the
signal type.
• “Audio Select” is only available for INPUT 5.
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
PPV TV
NORMAL TV
Auto Sync. adjustment (for
Fine Sync. adjustment
PPV TV
NORMAL TV
Analog PC input mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
For automatically adjusting the PC image.
Press MENU to display the MENU screen, and
1
then press
/
to select “Setup”.
c d
Press
/
to select “Fine Sync.”, and then
a b
2
3
press ENTER.
Press
item.
/
to select the specific adjustment
a b
Press MENU to display the MENU screen, and
1
then press
/
to select “Setup”.
c d
H-Pos.
[ 90]
[ 39]
[ 90]
[ 20]
a
a
a
a
b
b
b
b
Press
/
to select “Auto Sync.”, and then
a b
V-Pos.
Clock
Phase
2
3
press ENTER.
Press
ENTER.
/
to select “Yes”, and then press
c d
Reset
• Auto Sync. starts and “Now adjusting the image.”
displays.
Selected item
H-Pos.
Description
Centers the image by moving it to the
left or right.
V-Pos.
Clock
Phase
Centers the image by moving it up or
down.
Yes
No
Adjust when the image flickers with
vertical stripes.
Adjust when characters have low
contrast or when the image flickers.
Press
/
to adjust the item to your desired
c d
4
5
position.
30%
Press MENU to exit.
Press MENU to exit.
NOTE
• For resetting all Fine Sync. adjustment items to the factory
4
preset values, press
press ENTER.
/
to select “Reset”, and then
a b
NOTE
• It is not necessary to adjust the “Clock” or “Phase” when a
digital signal is being input, so it cannot be selected.
• When Auto Sync. is successful, “Completed” displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if “Completed” displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
PPV TV
NORMAL TV
NORMAL TV
Language setting
Reset
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press MENU to display the MENU screen, and
Press MENU to display the MENU screen, and
1
1
then press
/
to select “Setup”.
c d
then press
/
to select “Setup”.
c d
Press
/
to select “Language”, and then
a b
Press
/
to select “Reset”, and then press
a b
2
3
4
2
press ENTER.
ENTER.
• If you already set the Secret No., input the 4-digit
secret number here. See page 62 for setting a
secret number.
• “Return to the factory preset values” displays on
the screen.
Press
/
to select the desired language
a b
listed on the screen, and then press ENTER.
Press MENU to exit.
Press
ENTER.
/
to select “Yes”, and then press
c d
3
4
PPV TV
NORMAL TV
• “Now, TV will restart automatically. OK?” displays
on the screen.
Image position
For adjusting a picture's horizontal and vertical
position.
Press
ENTER.
/
to select “Yes”, and then press
c d
• “Now initializing...” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
Press MENU to display the MENU screen, and
1
then press
/
to select “Setup”.
c d
Press
/
to select “Position”, and then
a b
2
3
press ENTER.
Press
/
to select “H-Pos.” or “V-Pos.”.
a b
Example
Now initializing...
H-Pos.
V-Pos.
[
[
0]
0]
a10
b10
b20
a20
Reset
NOTE
Selected item
H-Pos.
Description
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
Centers the image by moving it to the
left or right.
V-Pos.
Centers the image by moving it up or
down.
Press
/
to adjust the item to the desired
c d
4
5
position.
Press MENU to exit.
NOTE
• For resetting adjustments to the factory preset values,
press to select “Reset”, and then press ENTER.
/
a b
• When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.
• Adjustments are stored separately according to input
source.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
PPV TV
NORMAL TV
PPV TV
NORMAL TV
Input Label
Sleep Timer
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
For LODGENET and nSTREAMS users, set the
Sleep Timer from the Function menu.
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
• The remaining time displays when the sleep timer
has been set.
1
Press INPUT to select the desired input
source.
1
Sleep Timer: Remaining
30
Press MENU to display the MENU screen, and
Each time you press SLEEP, the remaining
time switches as shown below.
2
2
then press
/
to select “Setup”.
c d
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
• Five minutes before the time expires, the
remaining time displays every minute.
Press
/
to select “Input Label”, and then
a b
3
4
press ENTER.
Press
/
/
/
to select the new name for
a b c d
the input mode, and then press ENTER.
Off
30
60
Example
INPUT SOURCE
120
90
TV
NOTE
DVD
• Select “Off” by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when the remaining time reaches
zero.
• When the sleep timer is set, its indicator on the TV lights
red.
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
Press MENU to exit.
5
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
PPV TV
NORMAL TV
PPV TV
NORMAL TV
View Mode for 4:3 Programs
View Mode for HD Programs
Stretch mode is available for HD programs.
Suitable for viewing wide-screen 1.78:1 aspect-ratio
programs. When viewing 1.85:1 programs, the stretch
mode will still show very thin black bands at the top
and bottom of the screen.
Press VIEW MODE.
1
• The View Mode menu displays.
• The menu lists the View Mode options selectable
for the type of video signal currently being
received.
Example
View Mode
Side Bar
S. Stretch
Zoom
Stretch
Press VIEW MODE or
Mode menu is displayed to select a desired
item on the menu.
/
while the View
a b
2
• You can sequentially select a View Mode that has
its own aspect ratio.
Side Bar:
Suitable for viewing conventional
4:3 programs in their normal
format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs in full
screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs, stretch
mode will still show very thin black
bands at the top and bottom of the
screen.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
PPV TV
NORMAL TV
View Mode (for PC input mode)
You can select the screen size.
NOTE
• Connect the PC before making adjustments. (See page
34.)
• Selectable screen size may vary with input signal type.
Press VIEW MODE.
1
• The View Mode menu displays.
Example
View Mode
Normal
Zoom
Stretch
Dot by Dot
Press VIEW MODE or
Mode menu is displayed to select a desired
item on the menu.
/
while the View
a b
2
Example: Screen size images
Input signal
Normal
Zoom
Stretch
Dot by Dot
4:3
Keeps the original
aspect ratio in a full
screen display.
For viewing wide-
An image fully fills the Detects the resolution
screen programs. The screen.
top and bottom of the
image is cropped.
of the signal and
displays an image
with the same
number of pixels on
the screen.
Input signal
Stretch
Dot by Dot
16:9
An image fully fills the Detects the resolution
screen.
of the signal and
displays an image
with the same
number of pixels on
the screen.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
NORMAL TV
Output Select
Advanced Option settings
Allows you to select what controls the audio output.
Perform the following steps to set the Option menu
items on this page.
Selected item
Fixed
Description
• Sound via speaker is adjusted with
VOL
/
on the remote control
k l
unit or VOL
/
on the TV.
l k
• Sound via the AUDIO OUTPUT
terminal is not adjustable and
outputs at a consistent level.
Variable
• Sound via the AUDIO OUTPUT
terminal is adjusted with VOL
/
k l
on the remote control unit or VOL
on the TV.
/
l k
• Sound via speaker is muted.
Press MENU to display the MENU screen, and
1
then press
/
to select “Option”.
c d
PPV TV
NORMAL TV
Press
/
to select a specific adjustment
a b
Color System
2
3
4
item, and then press ENTER.
Select the video signal system compatible with your
equipment from the list below;
— Auto
Press
/
(or
/
) to select the desired
a b
c d
setting, and then press ENTER.
— NTSC
— PAL-M
Press MENU to exit.
• Skip this step for “Audio Only”.
— PAL-N
NOTE
• “Color System” can only be set for INPUT 1 VIDEO and
INPUT 2. (LC-32HT3U/LC-37HT3U)
“Color System” can only be set for INPUT 1 VIDEO, INPUT
2 VIDEO and INPUT 3. (LC-42HT3U)
• If you already set the Secret No., input the 4-digit secret
number here. See page 62 for setting a secret number.
NORMAL TV
Audio Only
When listening to music from a music program, you
can set the screen off and enjoy audio only.
Selected item
Description
On
Off
Audio is output without screen image.
NORMAL TV
Program Title Display
Both screen images and audio are
output.
Select the CH display when changing channels for
digital broadcasting.
NOTE
Selected item
Description
“Program Info.” displays
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed.
Yes
No
“Program Info.” does not display
PPV TV
NORMAL TV
Digital Noise Reduction
Produces a clearer video image.
Selected item
Description
No adjustment
On
High
Low
For enhanced Digital Noise Reduction
For moderate Digital Noise Reduction
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
PPV TV
NORMAL TV
Selected item
STANDARD
Description
AV MODE
For a highly defined image in a normal
lighting
[Enhanced Picture Contrast: on]
AV MODE gives you 7 viewing options to choose from
to best match the surrounding environment of the TV,
which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
MOVIE
GAME
For a movie
[Enhanced Picture Contrast: off]
Lowers image brightness for easier
viewing
[Enhanced Picture Contrast: off]
PC
For PC
[Enhanced Picture Contrast: off]
USER
Allows the user to customize settings
as desired. You can set the mode for
each input source.
Press AV MODE.
1
• Current AV MODE displays.
[Enhanced Picture Contrast: off]
Press AV MODE again before the mode
DYNAMIC
(Fixed)
Changes the image and sound
settings to the factory preset values.
No adjustments are allowed.
2
displayed on the screen disappears.
• The mode changes as shown below.
[Enhanced Picture Contrast: on]
When the input source is TV, INPUT 1, 2 or 3 terminals
(Example)
DYNAMIC
For a clear-cut image emphasizing
high contrast, useful for sports viewing
[Enhanced Picture Contrast: on]
AV MODE: STANDARD
AV MODE: MOVIE
AV MODE: GAME
AV MODE: USER [TV]
Input Signal (for Analog
PC input mode only)
PPV TV
NORMAL TV
AV MODE: DYNAMIC
Some input signals may have to be registered manually
to display properly.
The pair of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
AV MODE: DYNAMIC (Fixed)
When the input source is INPUT 4, 5 or 6 terminals
(Example)
AV MODE: STANDARD
AV MODE: MOVIE
AV MODE: GAME
AV MODE: PC
1024 768
1360 768
g
g
NOTE
AV MODE: DYNAMIC
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
AV MODE: DYNAMIC (Fixed)
Press MENU to display the MENU screen, and
1
then press
/
to select “Setup”.
c d
AV MODE: USER [
]
Press
/
to select “Input Signal”, and then
a b
2
NOTE
press ENTER.
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
• “Enhanced Picture Contrast” technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels.
Press
on the display.
/
to select the desired input signal
a b
3
4
Press MENU to exit.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Press CC.
Closed Captions and
1
2
PPV TV
NORMAL TV
• This will present the Closed Caption information
display.
Digital Closed Captions
Press CC while the Closed Caption information
is still on the screen.
• Press repeatedly until you select the desired
closed caption service.
For LODGENET and nSTREAMS users, set the
Closed Captions from the Function menu.
Your TV is equipped with an internal Closed Caption
decoder. It allows you to view conversations, narration
and sound effects as subtitles on your TV. Closed
Captions are available on some TV programs and on
some VHS home video tapes at the discretion of the
program provider.
Air
ANALOG
2
Audio
CC
:
:
MONO
1/2 CC1
Closed Caption
information
Digital Closed Caption service is a new caption service
available only on digital TV programs (also at the
discretion of the service provider). It is a more flexible
system than the original Closed Caption system,
because it allows for a variety of caption sizes and font
styles. When the Digital Closed Caption service is in
use, it will be indicated by the appearance of a 3-letter
abbreviation that also indicates the language of the
Digital Closed Captions: ENG (English), SPA (Spanish),
FRA (French) or other language codes.
• Depending on the number of caption services in
the signal being received, you will see information
such as 1/2 or 1/4 displayed.
1/2 means “the first of two services”.
Example:
If a program has three services (Digital CC(ENG),
CC1 and Text1), the closed caption display will
toggle in this sequence:
1/3 ENG
2/3 CC1
3/3 Text1
Off
• The CC button keeps a record of the last service
selected in its memory.
Not all programs and VHS videotapes offer closed
captions. Please look for the “
that captions will be shown.
” symbol to ensure
N
If the last closed caption mode (e.g. 1/3ENG) you
selected is not available for the next program, or
on another channel, the closed caption service
that is available is automatically selected, and this
service appears in parentheses, e.g. “1/3(CC1)”.
Closed Caption services that appear in
parentheses will not be stored in the CC button's
memory as your last selected service. Only
services that you have selected with the CC
button are stored.
In the Closed Caption system, there can be more than
one caption service provided. Each is identified by its
own number. The “CC1” and “CC2” services display
subtitles of TV programs superimposed over the
program's picture.
In the Closed Caption system, the “Text1” or “Text2”
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed over the program currently
being viewed.
Examples:
In a case where there are two closed caption
services provided, (for instance, Digital
CC(ENG) and CC1), and Digital CC(ENG)
is displayed as your current selection, if
Digital CC(ENG) is not broadcast for the next
program, the other closed caption service,
CC1, will be displayed in parentheses.
A closed caption service appears in
parentheses because the service you selected
is not available and a different service is
displayed on your screen. “1/1(CC1)” is
displayed instead of “1/2/ENG”.
NOTE
• See page 61 for detailed closed caption settings.
• When the program contains no closed caption, “--”
displays in the closed caption information.
• If the language code, e.g. “ENG”, is not found on Digital TV
programs, “--” will be shown.
• Four kinds of closed caption service (CC1, CC2, Text1,
Text2) are potentially available, but a broadcast may contain
none or only some of these services at the discretion of the
program provider.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
PPV TV
NORMAL TV
NOTE
Caption Setup
• For resetting adjustments to the factory preset values,
This function allows you to adjust the closed caption
screen appearance to suit your preference.
press
/
to select “Reset”, and then press ENTER.
a b
• The default value depends on the broadcasting station.
Press MENU to display the MENU screen, and
1
Selectable items available for “Font Style”.
then press
/
to select “Option”.
c d
Selected item
Default
Description
Press
/
to select “Caption Setup”, and
a b
2
3
then press ENTER.
The font specified by broadcasting
station or default font.
Press
item.
/
to select a specific adjustment
a b
Type 0
Proportional font used in the MENU
screen.
• You can adjust 7 items here; they are,
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Type 7
Monospaced with serifs.
Proportionally spaced with serifs.
Monospaced without serifs.
Proportionally spaced without serifs.
Casual font type.
“Caption Size”,
“Font Style”,
1
2
3
4
5
6
7
“Foreground Color”,
“Foreground Opacity”,
“Background Color”,
“Background Opacity” and
“Character Edge”.
Cursive font type.
Small capitals.
Caption Size
Font Style
Default
Default
Default
Default
Default
Default
Default
Foreground Color
Foreground Opacity
A B C
123
Background Color
Background Opacity
Character Edge
Reset
Press
/
to select the desired parameter.
c d
4
5
Press MENU to exit.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Input the same 4-digit number on the
Secret number setting
for parental control
(AV input mode only)
5
“Reconfirm” screen as in step 4 to confirm.
PPV TV
NORMAL TV
New Secret No.
Secret No. Clear
Input Secret No.
New Secret No.
Reconfirm
a
a
a
a
PPV TV mode:
*
*
*
*
Parental CTRL is only for LODGENET and
nSTREAMS users. For ONCOMMAND, NXTV,
SeaChange and some LODGENET and
nSTREAMS (depending on the system you
have) users, the hotel server controls the
setting.
a
a
a
a
Press RETURN to start configuring the V-Chip
settings. (See pages 65 and 67 for details.)
6
7
For LODGENET and nSTREAMS users,
use SELECT on the remote control unit of
LODGENET and nSTREAMS instead of ENTER
in the following operations.
Press MENU to exit.
Allows you to use a secret number to protect certain
settings from being accidentally changed.
Setting parental control status
Used to enable or disable the parental control function.
IMPORTANT:
Repeat steps 1 and 2 in Setting a secret
number.
Three conditions must be met to enable the V-Chip (see
pages 62 to 67):
1
• The secret number setting menu displays.
Secret No. is registered.
V-Chip/V-Chip (DTV Only) settings have been
made.
1
2
Input the 4-digit secret number by using 0–9.
2
“Status” is set to “On”.
3
Press
/
to select “Status”, and then press
to select “On” or “Off”, and then
a b
Setting a secret number
3
4
ENTER.
Press MENU to display the MENU screen,
and then press to select “Setup”.
1
2
3
Press
press ENTER.
• Select “On” to enable and “Off” to disable Parental
CTRL.
/
c d
/
c d
Press
/
to select “Parental CTRL”, and
a b
then press ENTER.
V-Chip
V-Chip (DTV Only)
Secret No.
Status
Press
/
to select “Secret No.”, and then
a b
press ENTER.
V-Chip
On
Off
V-Chip (DTV Only)
Secret No.
Status
Press MENU to exit.
5
Select “New Secret No.”, and then press
NOTE
4
ENTER.
• You can skip steps 1 and 2 above while in the Parental
CTRL screen.
• The “V-Chip (DTV Only)” will only be selectable when a new
rating system can be downloaded via digital broadcasting
in the U.S.
Input the new 4-digit secret number by using
0–9.
New Secret No.
Secret No. Clear
a
a
a
a
a
a
a
a
a
a
a
a
Input Secret No.
New Secret No.
Reconfirm
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Changing the secret number
Clearing the secret number
Allows you to change your current secret number.
Allows you to clear your secret number.
Repeat steps 1 and 2 in Setting a secret
number.
1
• The secret number setting menu displays.
Input the 4-digit secret number by using 0–9.
2
Press
/
to select “Secret No.”, and then
a b
3
4
5
Repeat steps 1 and 2 in Setting a secret
press ENTER.
1
number.
• The secret number setting menu displays.
Press
then press ENTER.
/
to select “Secret No. Clear”, and
a b
Input the 4-digit secret number by using 0–9.
2
Press
ENTER.
• Your secret number is cleared.
New Secret No.
/
to select “Yes”, and then press
c d
Press
/
to select “Secret No.”, and then
a b
3
4
5
press ENTER.
Secret No. Clear
Press
/
to select “New Secret No.”, and
a b
then press ENTER.
Yes
No
Input the old 4-digit secret number by using
0–9.
New Secret No.
Secret No. Clear
a
a
a
a
a
a
a
a
a
a
a
a
Input Secret No.
New Secret No.
Reconfirm
Press MENU to exit.
6
NOTE
• See page 62 for re-registering a new secret number after
being cleared.
• As a precautionary measure, make a note of your
secret number and keep it in a familiar place.
• If the secret number is cleared, the Status setting
automatically sets to “Off”. “V-Chip” and “Status” will not
be selectable from the menu.
Input the new 4-digit secret number by using
6
7
0–9.
New Secret No.
Secret No. Clear
a
a
a
a
a
a
a
a
a
a
a
a
Input Secret No.
New Secret No.
Reconfirm
Input the same 4-digit number on the
“Reconfirm” screen as in step 6 to confirm.
New Secret No.
Secret No. Clear
Input Secret No.
New Secret No.
Reconfirm
a
a
a
a
*
*
*
*
a
a
a
a
Press MENU to exit.
8
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
PPV TV
NORMAL TV
Parental control (setting V-CHIP level)
V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over
broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while
blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV.
“V-Chip” and “Status” will not be selectable from the menu if you do not first configure your secret
number. (See page 62 for Secret number setting for parental control.)
• The U.S. has two rating systems for viewing content: TV Parental Guidelines and movie ratings.
• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate
television shows from their children.
• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as
watched on cable TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.
Voluntary movie rating system (MPAA)
Rating
Description
G
General audiences. All ages admitted.
PG
Parental guidance suggested. Some material may not be suitable for children.
PG-13
R
Parents strongly cautioned. Some material may be inappropriate for children under 13.
Age
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some
jurisdictions).
NC-17
X
No one 17 and under admitted.
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.
MPAA
a
TV Guidelines
G
• If you select “PG-13”, this will automatically block the higher
Can. English Ratings
Can. French Ratings
PG
ratings “R”, “NC-17” and “X”.
PG-13
R
NOTE
NC-17
X
• Voluntary movie rating system only uses an age-based rating.
NONE
TV Parental Guidelines
Content
FV
(Fantasy
violence)
V
S
L
D
Rating
(Violence)
(Sexual
situation)
(Adult
(Sexually
language) suggestive
dialog)
TV-Y (All children)
z
z
z
z
z
z
z
z
z
TV-Y7 (Directed to older children)
TV-G (General audience)
g
Suggested
age
z
z
g
g
g
z
g
g
g
z
g
g
TV-PG (Parental Guidance suggested)
TV-14 (Parents strongly cautioned)
TV-MA (Mature audience only)
g
g
g
: The content rating can be set, but this rating is not normally broadcast by TV stations.
z
: Content rating can be set.
g
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
TV Parental Guidelines (TV Guidelines)
Voluntary movie rating system (MPAA)
Repeat steps 1 to 4 in Voluntary movie
rating system (MPAA).
1
Press
/
to select “TV Guidelines”, and
a b
2
3
then press ENTER.
Press
/
to adjust the item to your desired
a b
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
Press MENU to display the MENU screen, and
1
then press
/
to select “Setup”.
c d
Example
MPAA
Press
/
to select “Parental CTRL”, and
a b
2
TV Guidelines
TV-Y
then press ENTER.
Can. English Ratings
Can. French Ratings
TV-Y7
TV-G
D
L
• The secret number setting menu displays only
when “Secret No.” is set. (See page 62.)
• “V-Chip” and “Status” will not be selectable from
the menu if you do not first configure your secret
number. (See page 62.)
TV-PG
TV-14
TV-MA
NONE
S
V
FV
Input the 4-digit secret number by using 0–9.
3
4
When setting an individual content-based
rating item, do as follows:
Press
/
to select “V-Chip”, and then press
a b
Press
or ENTER to access blocked
1
d
ENTER.
content items from the currently selected
age-based rating item.
V-Chip
V-Chip (DTV Only)
Secret No.
Status
Press
/
to select an individual item,
2
a b
and then press ENTER to unblock it (“ ”
is removed). Repeat the same steps for the
other items.
Press
or RETURN to register after all
3
c
individual content rating items are set.
Example
Press
/
to select “MPAA”, and then press
to adjust the item to your desired
a b
MPAA
5
6
ENTER.
TV Guidelines
TV-Y
Can. English Ratings
Can. French Ratings
TV-Y7
TV-G
D
L
Press
/
a b
position. “ ” indicates the item is blocked.
TV-PG
TV-14
TV-MA
NONE
S
V
Press RETURN.
• The setting automatically enters “Block” for any
ratings below your selection.
FV
• If Status is not set to “On”, the configuration
settings will not work. (See page 62.)
• If Status is not set to “On”, the configuration
settings will not work. (See page 62.)
Example
Press MENU to exit.
MPAA
4
TV Guidelines
G
Can. English Ratings
Can. French Ratings
PG
PG-13
R
NC-17
X
NONE
Press MENU to exit.
7
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Canadian Rating Systems
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications
Commission (CRTC) policy on violence in television programming.
• While violence is the most important content element to be rated, the structure developed takes into
consideration other program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the
Canadian French ratings.
Canadian English ratings
Rating
Description
E
Exempt: Includes news, sports, documentaries and other information programming; talk shows,
music videos, and variety programming.
C
Children: Intended for younger children under the age of 8 years. Pays careful attention to themes
that could threaten their sense of security and well-being.
C8
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only
way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on
the screen.
e
Age
G
General: Considered acceptable for all age groups. Appropriate viewing for the entire family,
contains very little violence, physical, verbal or emotional.
PG
Parental Guidance: Intended for a general audience, but may not be suitable for younger children
(under the age of 8) because it could contain controversial themes or issues.
14
18
Over 14 Years: Could contain themes where violence is one of the dominant elements of the
storyline, but it must be integral to the development of plot or character. Language usage could
be profane and nudity present within the context of the theme.
e
e
Adults: Intended for viewers 18 years and older and might contain depictions of violence, which
while related to the development of plot, character or themes, are intended for adult viewing.
Could contain graphic language and portrayals of sex and nudity.
Canadian French ratings
Rating
Description
E
Exempt programming.
G
General: All ages and children, contains minimal direct violence, but may be integrated into the
plot in a humorous or unrealistic manner.
8ans
General but inadvisable for young children: May be viewed by a wide public audience, but could
contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real
situations. Recommended for viewing with parent.
e
Age
13ans
Over 13 years: Could contain scenes of frequent violent scenes and therefore recommended for
viewing with parent.
e
16ans
18ans
Over 16 years: Could contain frequent violent scenes and intense violence.
e
Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.
e
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Canadian English ratings
Canadian French ratings
Repeat steps 1 to 4 in Canadian English
ratings.
1
2
Press
/
to select “Can. French Ratings”,
a b
and then press ENTER.
Press
/
to adjust the item to your desired
a b
3
position. “ ” indicates the item is blocked.
Press MENU to display the MENU screen, and
• The setting automatically enters “Block” for any
ratings below your selection.
1
then press
/
to select “Setup”.
c d
• If Status is not set to “On”, the configuration
settings will not work. (See page 62.)
Press
/
to select “Parental CTRL”, and
a b
2
then press ENTER.
Example
• Secret number setting menu displays only when
“Secret No.” is set. (See page 62.)
MPAA
• “V-Chip” and “Status” will not be selectable from
the menu if you do not first configure your secret
number. (See page 62.)
TV Guidelines
E
Can. English Ratings
Can. French Ratings
G
8ans+
13ans+
16ans+
18ans+
NONE
Input the 4-digit secret number by using 0–9.
3
4
Setup
Option
Secret No.
a
a
a
a
Press MENU to exit.
4
Press
/
to select “V-Chip”, and then press
a b
ENTER.
V-Chip
How to temporarily release the
PPV TV
NORMAL TV
V-Chip (DTV Only)
Secret No.
Status
V-CHIP BLOCK
When the V-CHIP BLOCK is working and censors a
broadcast, “V-CHIP HAS BEEN ACTIVATED.” displays.
Press ENTER while the V-CHIP is working,
1
and then the secret number setting menu
displays.
Press
/
to select “Can. English Ratings”,
a b
Input the 4-digit secret number by using
5
6
2
and then press ENTER.
0–9. At this time V-CHIP BLOCK temporarily
releases.
Press
/
to adjust the item to your desired
a b
position. “ ” indicates the item is blocked.
Reactivating the temporarily
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On”, the configuration
settings will not work. (See page 62.)
PPV TV
released V-CHIP BLOCK
NORMAL TV
You can reactivate the temporarily released V-CHIP
BLOCK as shown below
Example
.
MPAA
Method 1:
E
TV Guidelines
Select “Status” setting from the Parental CTRL menu
to reactivate BLOCK. (See page 62.)
C
Can. English Ratings
Can. French Ratings
C8+
G
Method 2:
PG
14+
18+
NONE
Select “V-Chip” setting (“MPAA”, “TV Guidelines”,
“Can. English Ratings” or “Can. French Ratings”)
from the Parental CTRL to reactivate BLOCK. (See
pages 65 and 67.)
Press MENU to exit.
7
Method 3:
Switch off the TV power.
NOTE
• Performing any of the three above will activate the V-CHIP
BLOCK.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Other viewing options
PPV TV
NORMAL TV
Freezing images
Presetting remote control function
Allows you to capture and freeze a moving image that
you are watching.
You can operate the connected AV products (AV
Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function of your
remote control unit.
Press FREEZE.
1
• A moving image is captured.
Press FREEZE again to cancel the function.
2
NOTE
• When this function is not available, “No displaying still
image available.” will display.
• The still image automatically goes out after 30 minutes.
• If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
cancelled and a V-CHIP BLOCK message will appear.
Presetting manufacturer codes
Press FUNCTION until the LED for your
1
device lights up.
After the LED for your device lights up,
2
press FUNCTION and DISPLAY at the
same time to enter the code registration
mode. The LED will blink.
Press 0–9 to enter the manufacturer code.
(See page 69.)
3
• Preset mode is finished once the LED no
longer lights up.
After registering the code, the LED will stop
blinking then turn off after one second. (If
4
you perform an incorrect operation, the LED
will blink quickly then turn off.)
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Other viewing options
Manufacturer codes
REMOTE CONTROL
CODE NUMBER
VCR BRAND
REMOTE CONTROL
CODE NUMBER
DVD/LD BRAND
REMOTE CONTROL
CODE NUMBER
CATV/SAT BRAND
NOTE
• Numbers marked with * are SAT codes, all others are
CATV codes.
REMOTE CONTROL
AUDIO BRAND
CODE NUMBER
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Other viewing options
Cable control buttons
■
When the FUNCTION is set to CBL/SAT, the cable
converter connected to the TV can be operated using 1 to 4.
1
2
1
2
SOURCE POWER
Turns the cable converter power on and off.
0–9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
FLASHBACK *
Press to switch between the current channel and the
channel you were watching immediately before.
3
4
CH
/
r s
3
4
Press CH
channel.
or CH
to tune in a higher or lower
r
s
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
SAT control buttons
■
1
SOURCE POWER
Turns the cable converter power on and off.
0–9, • (DOT)
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
1
2
2
3
ENTER,
/
/
/
a b c d
ENTER: Press to activate the selected function.
/
/
/
: Press the button to select items on the
SAT GUIDE screen or SAT MENU screen.
a b c d
NOTE
• CABLE and SAT cannot be selected at the same time.
3
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Other viewing options
VCR control buttons
■
8
The remote control unit button will function as follows when the FUNCTION
of the remote control unit is set to VCR.
• Press INPUT until the input connected to the VCR is selected. The following 1 to 8
can be used to control the VCR.
1
2
3
4
5
6
7
8
CH
/
r s
2
4
Press to select the channel of the TV tuner on the VCR.
SOURCE POWER
Turns the power of the VCR on and off.
7
3
5
6
F
Sets pauses and still pictures.
G
Rewinds the tape and allows picture search.
H
Stops the tape transport.
REC
Starts recording.
1
J
Rapidly advances the tape and allows picture search.
I
Starts playback.
DVD control buttons
■
The remote control unit button will function as follows when the FUNCTION
of the remote control unit is set to DVD.
• Press INPUT until the input connected to the DVD player is selected. The following
1 to 10 can be used to control the DVD player.
1
2
L
3 10
Pressing quickly once takes you to the start of the next chapter. Each
time you press it, you move ahead to the start of the next chapter.
K
Pressing quickly once takes you to the start of the chapter currently
playing. Each time you press it, you move back to the start of the
previous chapter.
SOURCE POWER
Turns the power of the DVD player on and off.
5
6
2
1
9
4
3
4
5
6
F
Sets pauses and still pictures.
G
Hold down to go in reverse.
H
Playback stops when pressed.
With some DVD players, pressing the button twice may open the disc tray.
MENU
When this button is pressed, the DVD menu will display.
7
8
7
ENTER,
/
/
/
a b c d
8
ENTER: Press to activate the selected function.
/
/
/
:
Press the button to select items on the DVD MENU screen.
a b c d
9
J
Hold down to fast forward.
10
I
Starts playback.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Possible Solution
• No power
• Check if you pressed TV POWER on the remote control unit. (See page 35.) If the
indicator on the TV does not light up, press POWER on the TV.
• Is the AC cord disconnected? (See page 16 of the operation manual for the LC-
32HT3U.)
• Has the power been turned on? (See page 35.)
• Depending on the Room Mode setting, you need to press MASTER or ROOM on the
Remote Replicator to turn on the TV. (See pages 11, 14, 18, 21 and 24.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, may cause improper operation.
In this case, operate the unit after first turning on the power of the TV or unplugging the
AC cord and replugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Is the FUNCTION set correctly? Set it to the TV setting position.
• Are batteries inserted with polarity ( ) aligned? (See page 32.)
,
e f
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control sensor?
• The buttons on the remote control unit may not function depending on the Room Mode
setting. (See page 6.)
• Picture is cut off/with sidebar
screen.
• Is the image position correct? (See page 54.)
• Are screen mode adjustments such as picture size made correctly? (See pages 56 and
57.)
• Strange color, light color, or
color misalignment
• Adjust the picture tone. (See pages 47 to 48.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting. (See page 59.)
• Power is suddenly turned off.
• Is the sleep timer set? (See page 55.)
• Check the power control settings. (See page 50.)
• The unit's internal temperature has increased. Remove any objects blocking vent or
clean.
• No picture
• Is connection to other components correct? (See pages 33 and 34.)
• Is correct input signal source selected after connection? (See page 51.)
• Is the correct input selected? (See page 51.)
• Is picture adjustment correct? (See pages 47 to 48.)
• Is “On” selected in “Audio Only”? (See page 58.)
• Is a non-compatible signal being input? (See page 34.)
• No sound
• Is the volume too low? (See page 38.)
• Is “Variable” selected in “Output Select”? (See page 58.)
• Have you pressed MUTE on the remote control unit? (See page 38.)
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to change in temperature. This does not affect the TV’s performance.
Troubleshooting-Digital broadcasting
The error message about reception of broadcast
The example of an error message
Error code
Possible Solution
displayed on a screen
• Check the antenna cable. Check that the antenna is correctly
setup.
• Failed to receive broadcast.
• No broadcast now.
E202
E203
• Check the broadcast time in the program guide.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: 4°F to 140°F ( 20°C to 60°C)
f
e
f
e
72
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number using the following procedure.
Press MENU to display the MENU screen, and then press
/
to select “Setup”.
c d
1
2
Press
/
to select “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset”, and the Secret number
a b
input screen displays.
Setup
Option
Secret No.
a
a
a
a
Press and hold both CH
and VOL on the TV simultaneously until the message appears on the
r
k
3
screen.
The secret number is
.
NOTE
• As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
TINS-D140WJZZ
07P08-NA-WG
Download from Www.Somanuals.com. All Manuals Search And Download.
|