-
LC 19D1E
LC-19D1S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
OPERATION MANUAL
• The illustrations and the OSD (On-Screen Display) in this operation manual are for explanation purposes and may vary
slightly from the actual operations.
• The marks (-BK, -WH and etc.) at the end of model name represent the colour of the TV cabinet.
TV/AV only
TV only
: these icons used throughout this manual indicate the menu item can be set or adjusted
only in the selected input mode.
• “PC only” refers to the PC input EXT 5 terminal and does not include PC input (HDMI-
PC input) on the EXT 4 (HDMI) terminal.
TV/DTV/AV only
PC only
• HDMI-PC: PC (RGB) input on the EXT 4 (HDMI) terminal
• The HDMI-PC input is compatible with VGA.
Contents
Trademarks …………………………………………………………
Dear SHARP customer ……………………………………………
Important Safety Precautions …………………………………
Supplied accessories ……………………………………………
Quick guide …………………………………………………………
Attaching the stand……………………………………………
Setting the TV …………………………………………………
Inserting the batteries…………………………………………
Using the remote control unit ………………………………
Cautions regarding the remote control unit …………
Remote control unit ……………………………………………
TV (Front/Side view) …………………………………………
TV (Rear view) …………………………………………………
Turning on the power …………………………………………
Standby mode …………………………………………………
Turning off the power …………………………………………
Initial auto installation (Analogue) …………………………
Initial auto installation (DTV) …………………………………
Using external equipment ………………………………………
Connecting a VCR ……………………………………………
Connecting a game console or camcorder ………………
Connecting a DVD player ……………………………………
Connecting a decoder ………………………………………
Connecting a PC ………………………………………………
Menu operations …………………………………………………
Common operations …………………………………………
1
2
2
2
3
3
3
4
4
4
5
6
6
7
7
7
7
7
8
8
8
8
8
9
9
9
WSS (Wide Screen Signalling) ………………………… 15
4:3 Mode ………………………………………………… 15
Rotate …………………………………………………… 16
Language ………………………………………………… 16
Supply Voltage ………………………………………… 16
Option menu ………………………………………………… 16
DNR (Digital Noise Reduction) ………………………… 16
Input Select ……………………………………………… 16
Audio Only ……………………………………………… 16
Colour System …………………………………………… 16
Useful features …………………………………………………… 17
WIDE MODE ………………………………………………… 17
Using the analogue programme list………………………… 17
Freezing the image while watching ………………………… 17
Teletext function ……………………………………………… 18
DTV menu operations …………………………………………… 18
DTV common operations …………………………………… 18
About using the character set screen ………………… 19
Language ……………………………………………………… 19
Programme Setup …………………………………………… 19
Installation …………………………………………………… 20
Auto Installation ………………………………………… 20
Carrier Scan……………………………………………… 20
Carrier Setup …………………………………………… 21
System Setup ………………………………………………… 21
OSD Setup ……………………………………………… 21
Child Lock ……………………………………………… 21
Accessories …………………………………………………… 22
Version (Software version)……………………………… 22
Software Upgrade ……………………………………… 22
Common Interface …………………………………………… 22
Inserting a CA card …………………………………… 22
Useful features (DTV) …………………………………………… 23
About EPG …………………………………………………… 23
Using the EPG …………………………………………… 23
Using the EPG Timer …………………………………… 23
Using the ESG ………………………………………………… 23
Using the digital programme list …………………………… 24
Displaying subtitles…………………………………………… 24
Viewing a service banner …………………………………… 24
Using the multi audio function ……………………………… 24
Using the MHEG5 application (UK only)…………………… 24
Appendix …………………………………………………………… 25
Troubleshooting ……………………………………………… 25
RS-232C port specifications ………………………………… 26
Specifications ………………………………………………… 27
PC compatibility chart (EXT 5 only) ………………………… 27
End of life disposal ……………………………………………… 28
AV Mode ……………………………………………………… 10
Picture menu ………………………………………………… 10
OPC ……………………………………………………… 10
Picture adjustments …………………………………… 10
Advanced………………………………………………… 10
Audio menu …………………………………………………… 11
Audio adjustments ……………………………………… 11
Sound Wide ……………………………………………… 11
Power Control menu ………………………………………… 12
No Signal Off …………………………………………… 12
No Operation Off………………………………………… 12
Power Management …………………………………… 12
Setup menu …………………………………………………… 12
Auto Installation ………………………………………… 12
Programme Setup ……………………………………… 12
Auto Search………………………………………… 13
Manual Adjust ……………………………………… 13
Sort ………………………………………………… 14
Erase Programme ………………………………… 14
Child Lock………………………………………………… 14
Input Label ……………………………………………… 14
Position …………………………………………………… 14
PC Setup ………………………………………………… 15
HDMI Audio Select ……………………………………… 15
HDMI Auto View ………………………………………… 15
Trademarks
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
• The “HD ready” Logo is a trademark of EICTA.
• The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions
• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the
product. Do not use liquid cleaners or aerosol cleaners.
• Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can
cause the product to fall, resulting in serious personal injuries as well as damage to the product.
Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden
stops, excessive force and uneven floor surface can cause the product to fall from the cart.
• Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation openings. This product is not designed for built-
in installation; do not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• There is power consumption always if main plug is connected.
• Servicing—Do not attempt to service the product yourself. Removing covers can expose you to
high voltage and other dangerous conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as
a fixed point of blue, green or red.
This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When moving the TV, it should always be carried by two people, using both hands, be careful not to apply
pressure to the display.
Supplied accessories
Remote control unit (g1)
Cable clamp (g1)
Pages 4 and 5
Page 3
Product shape varies in some countries.
Stand unit (g1)
AC cord (g1)
Page 3
Page 3
• Operation manual (This publication)
• “AA” size battery (g2)...........Page 4
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
Attaching the stand
Before performing work spread cushioning over the base area to lay theTV on, making sure the
area is completely flat.This will prevent it from being damaged.
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
Soft cushion
1
Confirm the 3 screws supplied with the TV.
Alignment protrusions
Screws (m3)
(used in step 3)
2
3
Insert the stand into the opening on the bottom of
the TV. (1)
Screw
Insert and tighten the 3 screws on the bottom of
the TV as shown. (2)
NOTE
• To detach the stand, perform the above steps in reverse order.
Hex key
Setting the TV
Place the TV close to the AC
outlet, and keep the power plug
within reach.
Ferrite Core*
Standard DIN45325 plug
(IEC 169-2)
75-ohm coaxial cable
AC cord
Cable clamp
Product shape varies in some
countries.
Antenna
Connect the antenna cable from your antenna-/cable socket or the (room-/roof) antenna for antenna input terminal on
the back of your TV set to receive digitally/terrestrially broadcast stations.
An indoor antenna can also be used under good reception conditions. Passive and active room antennas are offered
commercially. In an active antenna its power is supplied via the antenna input terminal.
The supply voltage (5V) must be correspondingly set under “Supply Voltage”. (Page 16)
* Ferrite Core
The Ferrite Core should be permanently attached and never removed from the AC cord.
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither type causes unnecessary electrical
wave emissions or interference.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
Inserting the batteries
Before using the TV for the first time, insert two “AA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
1
2
Hold in the tab on the battery cover and pull the
cover towards the direction of the arrow.
Insert two supplied “AA” size batteries.
• Place batteries with their terminals corresponding
to the (e) and (f) indications in the battery
compartment.
3
Insert the smaller tab of the battery cover into the
opening (1), and press down on the cover until
it clicks in place (2).
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
5 m
Remote control sensor
30°
30°
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The
heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote control sensor
of the TV is under direct sunlight or strong lighting. In such case, change
the angle of the lighting or TV, or operate the remote control unit closer to
the remote control sensor.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
Remote control unit
16
AV MODE
Select an audio and video setting.
(See page 10.)
e (Mute)
Switch the sound on and off.
K (Sound mode)
Select the sound multiplex mode.
(See below.)
i (k/l) (Volume)*
i (k) Increase the volume.
i (l) Decrease the volume.
1
B (Standby/On)
Enter standby mode or turn on the
power.
p (Display information)
(See pages 23 and 24.)
DTV MENU
DTV: Display DTV Menu screen.
0–9
17
18
2
3
4
15
16
1
2
19
20
Set the channel in TV mode.
Set the page in Teletext mode.
17
18
19
3
When one of the 4 Nordic
countries (Sweden, Norway,
Finland, or Denmark) is
selected in the country setting
of Auto Installation, DTV
channels are 4 digits. When
another country is selected,
DTV channels are 3 digits.
P (r/s)
TV/DTV: Select the channel.
External: Switch to TV or DTV
input mode.
Teletext: Move to the next/previous
page.
4
21
22
b (INPUT SOURCE)
Select an input source.
(See pages 8 and 9.)
20
5
5
6
A (Flashback)
21
22
23
24
RADIO
Press to return to the previous
selected channel or external input
mode.
DTV: Switch between RADIO and
DTV mode.
6
7
8
• Due to the large variation in
transmitted volume levels in
RADIO mode, some stations
will produce distortion if the
volume level is set too high.
DTV
Press to access DTV mode while
watching other input sources, and
vice versa.
7
8
9
f
(WIDE MODE)
9
23
PC
Select the wide mode. (See page
17.)
Z (Freeze)
Freeze a motion picture on the
screen.
a/b/c/d (Cursor)
Select a desired item on the
setting screen.
Directly select the PC terminal as
an INPUT SOURCE.
24
25
MENU
10
25
26
Display the MENU screen.
RETURN
Return to the previous menu
screen.
Colour (Red/Green/Yellow/Blue)
TELETEXT: Select a page. (See
page 18.)
DTV: The coloured buttons are
used to select correspondingly to
the coloured items in the menu
screen.
[ (Subtitle for Teletext)
TV/External: To turn the subtitles
on and off.
DTV: Display the subtitle selection
screen. (See page 24.)
26
11
12
13
27
28
29
OK
Execute a command within the
menu screen.
TV/DTV: Display the programme
list. (See pages 17 and 24.)
14
30
10
11
END
Exit the menu screen.
EPG
DTV: To display EPG (Electronic
Programme Guide) screen.
(See page 23.)
27
12
13
m (Teletext)
Select the TELETEXT mode. (See
pages 18 and 24.)
DTV: Select DTV data
broadcasting and TELETEXT.
ESG
DTV: To display ESG (Electronic
Service Guide) screen. (See page
23.)
28
29
k (Reveal hidden Teletext)
(See page 18.)
v (Top/Bottom/Full)
Switch the Teletext image to Top,
Bottom or Full.
14
15
3 (Hold)
(See page 18.)
SLEEP
30
1 (Subpage)
(See page 18.)
Set the sleep timer on (in units of
30 min. up to max. 2 hr. 30 min.)
and off.
• Using K on the remote control unit
DTV mode:
Press K to open the multi audio screen. (See page 24.)
Analogue TV mode:
Each time you press K, the mode switches as illustrated in the following
tables.
NICAM TV broadcasts selection
A2 TV broadcasts selection
Signal
Selectable items
Signal
Selectable items
Stereo
STEREO, MONO
CH A, CH B, CH AB
MONO
Stereo
NICAM STEREO, MONO
Bilingual
Monaural
Bilingual
NICAM CH A, NICAM CH B,
NICAM CH AB, MONO
Monaural
NICAM MONO, MONO
* The volume can be individually set for the speaker and headphones output for
each input (TV, DTV, EXT 1, EXT 2, EXT 3, EXT 4, EXT 5).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
TV (Front/Side view)
a Power button
MENU button
b (Input Source) button
P (r/s) (Channel
buttons)
i (e/f) (Volume
buttons)
Operation without a remote control unit
TV control panel buttons
Remote control buttons
OPC indicator
b
OK
a
B (Standby/On)
indicator
Pr
Ps
b
OPC sensor
ik
il
d
c
Remote control sensor
TV (Rear view)
AC INPUT terminal
EXT 5 terminals
COMMON
INTERFACE
slot
EXT 4 (HDMI/AUDIO)
terminals
Headphone jack
EXT 1 (RGB) terminal
RS-232C terminal
Round lock for Kensington
Security Standard slot
EXT 3 (Component)
terminals
Antenna input terminal
(DVB-T 5V=/80mA)
EXT 2 terminals
NOTE
• Only if you use an active terrestrial antenna, select “On(5V)” under “Supply Voltage”. (See page 16.)
Regarding the headphone jack
WARNING:
• Use headphones with a stereo mini plug (Ø 3.5 mm).
Make sure that the volume is turned down before
• Be sure to unplug headphones from the jack when they
using or connecting earphones and headphones.
Listen to audio at moderate levels. Excessive
sound pressure from earphones and headphones
can cause hearing loss.
are not in use.
• The speakers do not output volume when headphones are
plugged in.
• You can set the volume to different levels for each input
source.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
You do not need to do anything during the auto search.
Turning on the power
When the Power of the TV is OFF (B indicator is off),
Press a on the TV.
The setup menu disappears and you can watch the
programme on channel 1.
• The B indicator on the TV changes to green.
When the TV is in Standby ( B indicator is Red),
Press B on the remote control unit.
Initial auto installation (DTV)
Digital Video Broadcasting is a transmission scheme.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services
displayed on the screen. It also allows a range of new
features and services including subtitles and multiple
audio tracks.
• The B indicator on the TV changes from red to green.
Standby mode
Press B on the remote control unit.
• The TV enters standby mode and the image on the screen
disappears.
• The B indicator on the TV changes from green to red.
To watch DTV broadcasts, follow the procedures below
to scan all available services in your area.
Turning off the power
1
2
Press DTV or b to access the DTV mode.
Press a on the TV.
Press DTV MENU and the DTV Menu screen
displays.
• The B indicator on the TV turns off.
• When the TV is turned off by a, you cannot turn on the
power by pressing B on the remote control unit.
3
4
Press c/d to select “Installation”.
Press a/b to select “Auto Installation”, and then
press OK.
Display status indicator
Off
Power off
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
• See page 14 for setting PIN.
• A confirmation message displays. To start the
search, select “Yes”.
Red
Green
The TV is in standby mode.
The TV is on.
NOTE
5
TheTV starts scanning all available DTV and radio
services in your area.
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the power outlet.
• Weak electric power is still consumed even when a is
turned off.
NOTE
• The language and country settings used in this operation
are the settings you have already set while executing the
Initial auto installation (Analogue). If you want to
reconfigure the country setting, for instance after moving
to another country, conduct “Auto Installation” from the
Setup menu again.
• In DTV input mode, if the power is turned off immediately
after a setting change from the menu screen, the new
setting or channel information may not be memorised.
Initial auto installation (Analogue)
• The services are stored according to the channel number
information embedded in the stream (if available). If the
information is not available, the services are stored
according to the order in which they were received.
If you would like to sort the order, it is possible to arrange
it as explained in page 20.
When the TV powers on for the first time after purchase,
the initial auto installation is invoked. You can
automatically set language, country and channels in
successive operations.
• To cancel the scan in progress, press END.
• You cannot select any DTV-related menu items unless
“Auto Installation” has been completed.
NOTE
• The initial auto installation functions only once. If the initial
auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
Setup menu. (See page 12.)
• The initial auto installation stops by pressing RETURN.
1
Setting the on-screen display language
1 Press a/b/c/d to select the desired language
listed on the screen.
2 Press OK to enter the setting.
2
Setting the country or area
1 Press a/b/c/d to select your country or area
listed on the screen.
2 Press OK to enter the setting.
• The programme auto search starts at the same time.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Setting the input source
To view external source images, select the input source using b on the remote control unit or TV.
NOTE
• The cables marked with * are commercially available items.
Connecting a DVD player
Connecting a VCR
You can use the EXT 1, 2, 3 or 4 (HDMI) terminals
when connecting to a DVD player and other
audiovisual equipment.
You can use the EXT 1 terminal when connecting a
VCR and other audiovisual equipment.
• When using SCART cable (EXT 1)
• When using component cable (EXT 3)
SCART cable*
SCART cable*
DVD player
VCR
Decoder
EXT 1
Component cable*
AUDIO cable*
Connecting a game console or
camcorder
A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 2 terminals.
EXT 3
• When using composite cable or S-video cable (EXT 2)
S-video cable*
• When using HDMI cable (EXT 4)
HDMI-certified cable*
Composite
video cable*
EXT 4
or
L-AUDIO-R
S-VIDEO
VIDEO
AV OUTPUT
DVD player
When using an HDMI-DVI conversion
adapter/cable, input the Audio signal
here.
Select “Analogue” in the “HDMI Audio
Select” of the Setup menu. (See page
15.)
Game console Camcorder
NOTE
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
EXT 2
AUDIO cable*
NOTE
• EXT 2: The S-VIDEO terminal has priority over the VIDEO
terminals.
Connecting a decoder
EXT 1
You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.
NOTE
SCART cable*
• In cases when the decoder needs to receive signal from
the TV, make sure to set “Decoder” to “EXT1” in the
Programme Setup “Manual Adjust” menu. (See page 13.)
Decoder
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Connecting a PC
Use the EXT 5 terminals to connect a PC.
EXT 5
EXT 5
PC
PC
ø 3.5 mm stereo minijack cable*
ø 3.5 mm stereo minijack cable*
RGB/DVI conversion cable*
RGB cable*
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 27 for a list of PC signals compatible with the TV.
Menu operations
Common operations
The following are three examples of basic menu operations. Please operate the menu by using the following
three patterns as a reference.
NOTE
G Menu Operation: B
• Select “Reset” under each MENU and for each Mode to
reset all adjustment items to the factory preset values.
• Press MENU or END to exit Menu. Press RETURN to return
to the previous display.
1
2
Repeat steps 1 and 2 in Menu Operation: A.
Press a/b to select the desired menu item
(Example: Backlight, Contrast, etc).
G Menu Operation: A
3
Press c/d to adjust the item to your desired
position.
1
2
3
Press MENU and the MENU screen displays.
+
Backlight
Contrast
Brightness
Colour
[+16]
[ 32]
–
Press c/d to select the desired menu.
Press a/b to select the desired menu item, and
then press OK (Example: OPC, etc).
+
+
[
0]
[ +4]
0]
–
–
Picture
Tint
[
DYNAMIC
+
Sharpness [ +4]
–
OPC
[Off]
+
Backlight
Contrast
Brightness
Colour
Tint
[+16]
[ 32]
–
G Menu Operation: C
1
2
Repeat steps 1 and 2 in Menu Operation: A.
+
+
[
0]
[ +4]
0]
–
–
Press a/b to select the desired menu item, and
then press OK (Example: Advanced, etc).
[
3
Press a/b to select the desired menu item, and
then press OK (Example: Colour Temp., Film
Mode, etc).
+
Sharpness [ +4]
Advanced
–
Reset
C. M. S.-Hue
C. M. S.-Saturation
4
Press a/b(c/d) to select the desired item,
press OK if necessary (Example: OPC setting).
C. M. S.-Value
Colour Temp.
Film Mode
High
Mid-High
Middle
Mid-Low
Low
3D - Y/C
On(Display)
Monochrome
I/P Setting
On
Off
4
Press a/b(c/d) to select or adjust the desired
item, press OK if necessary.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operations
TitleB
AV Mode
OPC
Menu Operation: A (page 9)
AV Mode gives you several viewing options to choose
from to best match the surrounding environment of the
TV, which can vary due to factors like room brightness,
type of programme watched or the type of image input
from external equipment.
Automatically adjust the brightness of the screen.
Item
On(Display): Displays the OPC effect on the screen while
adjusting the brightness of the screen.
On: Automatically adjusts.
Off: The brightness is fixed at the value set in Backlight.
1
Press AV MODE.
• Current AV MODE displays.
(EXAMPLE)
AV Mode: DYNAMIC
NOTE
• When set to “On”, the TV senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.
• The OPC indicator lights green when OPC is “On” or
“On(Display)”. “Backlight” cannot be adjusted during this
time.
2
Press AV MODE again before the mode displayed
on the screen disappears.
• The mode changes as shown below.
• Selectable AV mode varies with the selected INPUT
SOURCE.
Item
*STANDARD: For a highly defined image in a normally
bright room
Picture adjustments
*MOVIE: For a movie
Menu Operation: B (page 9)
GAME: Lowers image brightness for easier viewing.
PC: For a PC (Available only when inputting RGB signal.
The HDMI input (EXT 4) is compatible with VGA.)
USER: Allows the user to customise settings as
desired. You can set the mode for each input source.
*DYNAMIC: For a clear-cut image emphasising high
contrast for sports viewing
**DYNAMIC(FIXED): For a clear-cut image emphasising
high contrast for sports viewing (The “Picture” and
“Audio” settings cannot be adjusted.)
Adjustment items
Selectable
c button
d button
items
Backlight
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness For more
brightness
NOTE
• You can adjust the factory preset parameters given in
“STANDARD”, “MOVIE”, “GAME”, “PC” and “DYNAMIC”.
The parameters chosen affect each of the input sources.
• For Input Source “EXT5”, you can only select
“STANDARD”, “PC”, and “USER”.
Colour*
Tint*
For less colour
intensity
For more colour
intensity
Skin tones
become purplish
Skin tones
become greenish
• For the items marked with a *, Enhanced Picture Contrast
will activate when OPC is “Off”.
For the item marked with **, Enhanced Picture Contrast
always activate.
Sharpness*
For less sharpness For more
sharpness
• Enhanced Picture Contrast technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly, enabling deeper black levels.
Items marked * cannot be adjusted when PC Input
(including HDMI-PC Input (see page 1)) is selected.
TV/DTV/AV only
Advanced
Picture menu
Menu Operation: B or C (page 9)
Adjust the picture of each AV MODE to your preference
with the following picture settings (DYNAMIC(FIXED)
cannot be adjusted).
This TV provides various advanced functions for
optimising the picture quality.
Picture
DYNAMIC
C. M. S.-Hue
DYNAMIC
C. M. S.-Saturation
C. M. S.-Value
Colour Temp.
Film Mode
R
Y
[
[
[
[
[
[
0]
0]
0]
0]
0]
0]
–
–
–
–
–
–
+
+
+
+
+
+
OPC
[Off]
+
Backlight
Contrast
Brightness
Colour
Tint
[+16]
[ 32]
–
G
C
*1
*1
*2
+
+
3D - Y/C
B
[
0]
[ +4]
0]
–
–
Monochrome
I/P Setting
M
Reset
*1
[
+
Sharpness [ +4]
Advanced
–
• Item marked *1 cannot be adjusted when “EXT4” or “EXT5”
is selected in the INPUT SOURCE menu.
• Item marked *2 cannot be adjusted when PC input
(including HDMI-PC Input (see page 1)) is selected.
Reset
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operations
G C. M. S. (Colour Management System)
G I/P Setting
Colour tone is managed using the six-colour
adjustment setting.
Adjust the image and input signal can give you a more
beautiful picture.
Item
Item
C. M. S.-Hue: This is a standard to adjust the colour
either more reddish or more bluish in tone.
C. M. S.-Saturation: Increases or decreases the saturation
of a selected colour.
Interlace: Display finely detailed images for TV or video,
etc.
Progressive: Display smooth images for still images or
graphics, etc.
C. M. S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
Audio menu
G Colour Temp.
Audio
Adjust the colour temperature to give the best white
image.
DYNAMIC
Item
Treble
[ + 3]
[ + 2]
–
–
L
+
+
R
High: White with bluish tone
Mid-High: Intermediate tone between High and Middle
Middle: Natural tone
Mid-Low: Intermediate tone between Middle and Low
Low: White with reddish tone
Bass
Balance
Sound Wide
Reset
[
0]
G Film Mode
Audio adjustments
Automatically detect a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.
Menu Operation: B (page 9)
You can adjust the sound quality of each AV MODE to
your preference with the following settings
(DYNAMIC(FIXED) cannot be adjusted).
G 3D-Y/C
Selectable
items
c button
d button
Provide high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
Treble
Bass
For weaker treble
For weaker bass
For stronger treble
For stronger bass
Item
Standard: Normal adjustment
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
Fast: Set the optimum image quality for fast-moving
images.
Slow: Set the optimum image quality for slow-moving
images.
Off: No detecting
Sound Wide
NOTE
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Menu Operation: A (page 9)
This feature can increase the spread of the sound.
• This function is only available when a CVBS signal is input.
(Except a SECAM CVBS signal.)
Item
On: Increases the spread of the sound.
Off: Outputs the normal sound.
G Monochrome
For viewing a video in monochrome.
NOTE
NOTE
• This function is not available when using headphones.
• When Monochrome is set to “On”, the DTV Menu screen
displays in monochrome.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operations
Power Control menu
Setup menu
Power Control
Setup
No Signal Off
Auto Installation
Programme Setup
Child Lock
Input Label
Position
No Operation Off
Power Management
TV/AV only
No Signal Off
PC Setup
Menu Operation: A (page 9)
HDMI Audio Select
HDMI Auto View
WSS
When set to “Enable” the TV will automatically enter
the standby mode if there is no signal input for 15
minutes.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
4:3 Mode
Rotate
NOTE
Lanugage
• When a TV programme finishes, this function may not
operate.
Supply Voltage
Reset
• This function is not available in DTV mode.
CAUTION
No Operation Off
•
When selecting “Reset” in the Setup menu, all menus will be reset
to the factory preset values and “Auto Installation” will activate.
Menu Operation: A (page 9)
TV only
When you select the desired time, the TV will
automatically enter the standby mode if no operation
is performed.
Auto Installation
You can run Auto Installation again, even after setting
up the preset channels.
Item
1
2
3
Press MENU and the MENU screen displays.
30 min. / 3hr. / Disable
Press c/d to select “Setup”.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
Press a/b to select “Auto Installation”, and then
press OK.
If you have already set the PIN under “Child Lock”,
enter it here.
• See page 14 for setting PIN.
PC only
Power Management
Menu Operation: A (page 9)
When set, the TV will automatically enter the standby
mode.
4
5
Press a/b to select “Yes”, and then press OK.
You can set language and country the same as in
the Initial auto installation (Analogue). (See
page 7.)
Item
Off:
• No power management
Mode1: • If there is no signal input for 8 minutes, the TV
enters the standby mode.
TV only
Programme Setup
• Even if you start using the PC and the signal
inputs again, the TV stays in standby mode.
• The TV turns on again by pressing a on the TV
or B on the remote control unit. (See page 7.)
Mode2: • If there is no signal input for 8 seconds, the
TV enters the standby mode.
This section describes how to set up analogue TV
channels manually.
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
• When you start using the PC and the signal
inputs again, the TV turns on automatically.
• The TV turns on again by pressing a on the TV
or B on the remote control unit. (See page 7.)
Press a/b to select “Programme Setup”, and
then press OK.
If you have already set the PIN under “Child Lock”,
enter it here.
• See page 14 for setting PIN.
4
Press a/b to select “Auto Search”, “Manual Adjust”,
“Sort” or “Erase Programme”, and then press OK.
Auto Search
Manual Adjust
Sort
Yes
No
Erase Programme
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operations
G Auto Search
Colour sys.
You can automatically search for and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
auto sorting in Auto Installation.
Select the optimum colour systems to receive. (AUTO,
PAL, SECAM)
NOTE
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, SECAM).
1
2
Repeat steps 1 to 4 in Programme Setup.
Press a/b to select “Yes”, and then press OK.
Sound sys. (Broadcasting system)
G Manual Adjust
Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L’)
You can set some channel items manually.
Label
Fine
Colour Sys.
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.
Sound Sys.
Label
179.25
MHz
Skip
Decoder
Lock
1
2
Repeat steps 1 to 7 in Manual Adjust.
Press a/b to select characters and c/d to move
to the desired digit.
1
2
3
Press MENU and the MENU screen displays.
3
Repeat step 2 above until the name is fully spelt
out, and then press OK to complete the label
setting.
Press c/d to select “Setup”.
Press a/b to select “Programme Setup”, and
then press OK.
Skip
If you have already set the PIN under “Child Lock”,
enter it here.
• See page 14 for setting PIN.
Channels with “Skip” set to “On” are passed over when
using Pr/Ps even if selected while watching the
image from the TV.
4
Press a/b to select “Manual Adjust” and then
press OK.
Decoder
5
6
Press a/b to select “Yes”, and then press OK.
When connecting a decoder to the unit, you need to
select EXT 1.
Press a/b/c/d to select the channel you want
to edit, and then press OK.
• The selected channel information displays.
Lock
You can block the viewing of any channel.
7
8
Press a/b to select the desired menu item, and
NOTE
then press OK.
• See page 14 for setting PIN.
Press a/b (/0–9/c/d) to select or adjust.
• When Lock is set to “On” for a channel, “Child lock has
been activated.” displays, and the image and sound of
the channel are blocked.
Fine
You can adjust the frequency to your desired position.
• When pressing OK while “Child lock has been activated.”
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency in step
8 above, you can set by directly entering the frequency
number of the channel with 0–9.
EXAMPLE
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 0 s 4 s 9 s 2 s 5.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operations
Resetting the PIN
G Sort
Allows you to reset your PIN to the factory preset
“1234”.
Channel positions can be sorted freely.
1
2
3
Repeat steps 1 to 4 in Programme Setup.
1
2
3
Repeat steps 1 to 3 in Changing the PIN.
Press a/b to select “Reset”, and then press OK.
Press a/b to select “Yes”, and then press OK.
Press a/b to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you want
to move, and then press OK.
NOTE
4
5
Press a/b/c/d to move it to the desired
position, and then press OK.
• As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
• See page 25 for resetting the current PIN to the factory
preset “1234” if you lose or forget your PIN.
• To relock a channel which has been temporarily
unlocked by inputting the correct PIN, turn power off
and then on again.
Repeat steps 3 and 4 until all desired channels
are sorted.
G Erase Programme
An individual programme can be erased.
1
2
3
Repeat steps 1 to 4 in Programme Setup.
Input Label
Press a/b to select “Yes”, and then press OK.
You can assign each input source a label you like.
Press a/b/c/d to select the channel you want
to erase, and then press OK.
1
2
3
4
Press b to select the desired input source.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
4
5
Press OK to erase the selected programme. All
the subsequent programmes move up.
Repeat steps 3 and 4 until all desired channels
are erased.
Press a/b to select“Input Label”, and then press
OK.
TV only
Child Lock
5
Press a/b to select characters and c/d to move
to the desired digit to label the input source.
• When you want to change the input label to the
default name, select “CLEAR” on the “Input Label”
screen.
Allows you to use a PIN to protect certain settings from
being accidentally changed.
Changing the PIN
6
Repeat step 5 above until the name is fully spelt
out, and then press OK.
• The name can be 6 characters or less.
• When you want to set an input source name of less
than 6 characters, press MENU to exit from the
labelling menu.
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Child Lock”, and then press
OK. If you have already set the PIN under “Child
Lock”, enter it here.
NOTE
Change PIN
Reset
• You cannot change the label if the input source is TV or
DTV.
New PIN
– – – –
– – – –
TV/DTV/AV only
Position
Reconfirm
Menu Operation: C (page 9)
For adjusting a picture’s horizontal and vertical
position.
4
Press a/b to select “Change PIN”, and enter the
4-digit number as a PIN using 0–9.
Item
5
Enter the same 4-digit number as in step 4 to
confirm.
• When setting the PIN, “Reset” in the Menu will be
selectable and operational.
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
NOTE
NOTE
• Adjustments are stored separately according to input
• To view a locked channel (Lock setting in Programme
Setup “Manual Adjust” is set to “On”), you must enter a
PIN. (See page 13 and page 19 for locking channels from
viewing in analogue TV and DTV mode.) When you select
a locked channel, a PIN prompt message pops up. Press
OK to display the PIN input window.
source.
• Depending on the input signal type a position setting may
not be available.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operations
PC Setup
HDMI Audio Select
For adjusting a PC image.
• Only “H-Pos.” and “V-Pos.” in “Fine Sync.” are available
when the HDMI-PC input (see page 1) is selected.
Menu Operation: A (page 9)
Select “Digital” for audio signal via the HDMI terminal.
Select “Analogue” for audio signal via the AUDIO jack.
PC only
G Input Signal
NOTE
• This function is only available when “EXT4” is selected in
the INPUT SOURCE menu.
Menu Operation: C (page 9)
Some input signals may have to be registered manually
to display properly.
HDMI Auto View
The input signals (resolutions) in the list below are not
distinguishable when received. In such case, you have to
set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
Menu Operation: A (page 9)
Set whether or not to use WIDE MODE based on signal
recognition, including an HDMI signal.
NOTE
• This function is only available when “EXT4” is selected in
the INPUT SOURCE menu.
640 g 400
720 g 400
640 g 480
848 g 480
TV/DTV/AV only
WSS (Wide Screen Signalling)
1024 g 768
1280 g 768
1360 g 768
Menu Operation: A (page 9)
NOTE
WSS allows a television to switch automatically among
the different screen formats.
• Depending on the graphics card, resolution of 1360 x 768
may not display correctly.
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 7 input signals listed above.
• The above list will display in accordance with vertical
resolution of input signals.
NOTE
• Use WIDE MODE if an image does not switch to the correct
screen format. When the broadcast signal contains no
WSS information, the function will not work even if enabled.
(See page 17.)
PC only
G Auto Sync.
TV/DTV/AV only
4:3 Mode
Menu Operation: C (page 9)
For automatically adjusting the PC image.
Menu Operation: A (page 9)
Item
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
Yes: Auto Sync. starts.
No: You have to set Fine Sync. later.
Item
NOTE
Panorama: Wide image without side bars
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (ex. pattern with high contrast
stripes, or cross-hatched).
Normal: Normal range keeping 4:3 or 16:9 aspect ratio
WSS signal 4:3 screen
• It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the LCD-TV and switch it on
before starting Auto Sync.
4:3 mode “Normal”
4:3 mode “Panorama”
PC only
G Fine Sync.
Menu Operation: C (page 9)
Ordinarily, the TV automatically adjusts image positions coming
from PC (Auto Sync. function). In some cases, however, manual
adjustment is needed to optimise the image.
Item
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
Clock: Adjusts when the image flickers with vertical
stripes.
Phase: Adjusts when characters have low contrast or
when the image flickers.
NOTE
• If you need to adjust the image position, adjust the position
using your PC.
• “Clock” and “Phase” cannot be adjusted when the HDMI-
PC input (see page 1) is selected.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operations
Rotate
Input Select
Menu Operation: A (page 9)
Menu Operation: A (page 9)
You can set the orientation of the picture.
(Normal): normal image (Mirror): mirror image
For setting the signal type for EXT 1 only.
The signal type for EXT 2, EXT 3 and EXT 5 is fixed
and cannot be changed.
Input source Signal type
EXT 1
Y/C, CVBS, RGB
ABC
A B C
NOTE
• If no (colour) image displays, try to change the other
signal type.
• If both CVBS and RGB signals are input to EXT 1 using a
SCART cable, the TV may output an RGB signal even
though you have designated CVBS for the respective
terminal. This happens due to the setting of your external
equipment.
A B C
ABC
• The signal type for EXT 2 is automatically selected
between an S-VIDEO signal and a CVBS signal, with S-
VIDEO given priority.
(Rotate): rotated image (Upside Down): upside
down image
Audio Only
Language
Menu Operation: A (page 9)
Menu Operation: A (page 9)
When listening to music from a music programme, you
can set the display off and enjoy audio only.
You can select a language from the Setup menu. Select
from among 16 languages. (Czech, Dutch, English,
Finnish, French, German, Greek, Hungarian, Italian,
Polish, Portuguese, Russian, Slovak, Spanish,
Swedish, Turkish)
Item
On: Audio is output without screen image.
Off: Both screen images and audio are output.
• “Audio Only” will automatically turn “Off” when an
operation other than Volume and Mute is performed.
Supply Voltage
Menu Operation: A (page 9)
Colour System
Switch on or off the power to the antenna connected
to the antenna input terminal. (See page 3.)
Menu Operation: A (page 9)
You can change the colour system to one that is
compatible with the image on the screen. (AUTO, PAL,
SECAM, NTSC3.58, NTSC4.43, PAL-60)
Option menu
Option
NOTE
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, SECAM).
• This function is only available when “EXT1” or “EXT2” is
selected in the INPUT SOURCE menu.
DNR
Input Select
Audio Only
Colour System
TV/DTV/AV only
DNR (Digital Noise Reduction)
Menu Operation: A (page 9)
Produce a clearer image. (Off, High, Low)
• This function is available when “TV”, “DTV”, “EXT1”, “EXT2”
or “EXT3” is selected in the INPUT SOURCE menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
TV/DTV/AV only
PC only
WIDE MODE
WIDE MODE
You can select the picture size. Selectable picture size
varies with the type of signal received.
You can select the picture size.
1
2
Press f.
• The WIDE MODE menu displays.
Item (for SD (Standard-Definition) signal)
Normal: For 4:3 “standard” pictures. A side bar appears
on each side.
Zoom 14:9: For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may see bars on the
top and bottom with some programmes.
Panorama: In this mode the picture is progressively
stretched toward each side of the screen.
Full: For 16:9 squeeze pictures.
Cinema 16:9: For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Cinema 14:9: For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Press f or a/b to select a desired item on the
menu.
NOTE
• Can also be adjustable when the HDMI-PC input (see
page 1) is selected.
• Connect the PC before making adjustments. (See page
9.)
• Selectable picture size may vary with input signal type.
Item
Normal: Keeps the original aspect ratio by filling the
screen up to the top and bottom.
Full: An image fully fills the screen.
Dot by Dot: Detects the resolution of the signal and
displays an image with the same number of pixels on
the screen.
Item (for HD (High-Definition) signal)
Full: Display with the Overscan image. Crop all sides of
screen.
G Manual Selection
Using the analogue programme list
1
Press f.
You can also select the desired channel from
programme list instead of using 0–9 numeric buttons
or P (r/s).
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
2
Press f or a/b while the WIDE MODE menu
displays on the screen.
1
2
Press OK when no other menu screen is
displayed. (Except when an external input source
is selected.)
Press a/b to select the desired channel to tune
in, and then press OK.
• As you toggle down the options, each is immediately
reflected on the screen. No need to press OK.
G Auto Selection
If you set WSS and 4:3 Mode in the Setup menu on
page 15, the optimum WIDE MODE is automatically
chosen for every broadcast, VCR or DVD containing
the WSS information.
Freezing the image while watching
Allows you to capture and freeze one frame from a
moving image that you are watching.
G WSS menu
To enable Auto Selection, set WSS in the Setup menu
to “On”. (See page 15.)
1
2
Press Z.
• Captures one frame from a moving image.
Press Z again (or press RETURN) to cancel the
function.
G 4:3 Mode menu
To set the type of the wide screen, select “Normal” or
“Panorama” in the 4:3 Mode menu. (See page 15.)
NOTE
• The still image automatically goes out after 30 minutes.
4:3 Mode set to “Normal”
4:3 Mode set to “Panorama”
NOTE
• If the signal contains no WSS information, Auto Selection
will not function even when the WSS option is enabled.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
Button functions
Teletext function
Buttons
Description
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather and sports information, stock exchange
prices and programme previews are among the many
services available.
P (r/s)
Increase or decrease the page number.
Colour (Red/
Select a group or block of pages displayed in the
Green/Yellow/ coloured brackets at the bottom of the screen by
Blue)
pressing the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
Turning on and off Teletext
0–9
Directly select any page from 100 to 899 by
using 0–9.
1
Select a TV channel or external input source
providing the Teletext programme.
v (Top/
Bottom/Full)
Switch the Teletext image to Top, Bottom or
Full.
2
3
Press m to display the Teletext.
k
(Reveal
Reveal or hide hidden information such as
Each time you press m, the screen switches as
shown below.
hidden Teletext) an answer to a quiz.
3 (Hold)
Stop updating Teletext pages automatically
or release the hold mode.
DATA*
TELETEXT
[ (Subtitle
for Teletext)
Display the subtitle or exit the subtitle screen.
Subtitle will not be displayed when the service
does not contain the subtitle information.
•
Reveal or hide subpages.
1 (Subpage)
• Red button: Move to the previous subpage.
• Green button: Move to the following subpage.
• These two buttons are shown on the screen
by the signs l and k.
TELETEXT
* May appear in DTV input mode.
• If you select a programme with no Teletext signal,
“No Teletext available.” displays.
• The same message displays during other modes if
no Teletext signal is available.
NOTE
• Teletext will not work if the selected signal type is RGB.
(See page 16.)
DTV menu operations
1
Language
DTV common operations
• To customise the language preference for audio and
MHEG5 application.
DTV menu screen
2
3
Programme Setup
• To configure various settings for each service.
Installation
• To scan all services available in your area, or to label/
erase/re-scan the selected carrier.
1
2
3
4
5
6
E DTV common menu operation
4
5
6
System Setup
• To configure On-Screen Display and Child Lock
settings.
1
2
Press DTV or b to access the DTV mode.
Press DTV MENU and the DTV Menu screen
displays.
Accessories
• To display the current version of the software or to
allow the software upgrade to take place.
3
Press c/d to select the desired menu, and then
press OK if necessary.
• From this point, menu operations differ depending
on the item you are going to adjust. See the
respective section of the menu operation.
• You cannot select any DTV-related menu items
unless “Auto Installation” has been completed.
• Press RADIO to switch between DTV and Radio
mode.
Common Interface
• To display the current Common Interface details.
• To exit the current screen without saving the change,
press END.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV menu operations
Programme Setup
About using the character set screen
Configure various settings for each service. Press the
preassigned 1–9 numeric buttons to access each of
the functions explained below.
In some cases you may be prompted to enter
characters. See below for details.
Sample Alpha Numerical Character Set screen
1
Press OK while the cursor is on “Programme
Setup”.
FAV
1
!
,
~
-
#
.
$
/
%
0
:
&
1
<
G
R
]
‘
2
_
H
S
^
i
(
3
>
I
)
*
5
2
2
3
Press a/b to select the desired service.
+
6
4
?
J
U
=
k
v
7
B
M
X
c
n
y
8
C
N
Y
d
o
z
9
D
O
Z
e
p
;
@
K
V
a
Press 1–9 on the remote control to select the
functions below.
A
L
E
P
[
F
Q
\
T
`
3
Sample Programme Setup screen
W
b
f
g
r
h
s
j
l
S.No Services
Fav Lock Skip Erase Move
m
x
q
t
u
w
1
001 BBC
002 BBC News
003 BBC 1
004 BBC 2
Select
4
0...9
OK
END
5
6
1.
3.
5.
7.
9.
Fav
2.
4.
6.
8.
Lock
Move
Skip
Erase
View
Move To
Select
Label
1
2
Input area
Space
To add or overwrite with a space.
3
4
Character select area
NOTE
YELLOW (Select) button
Press to move between the input area and character
select area.
• The picture window shows a blank image if Radio services
are listed.
5
6
a/b/c/d button
G Favourite
Press to move the cursor.
Assign services to 4 different favourite groups.
OK button
While in the input area:
4
5
Press 1 on the remote control. A selection box
Confirms the new name.
displays.
While in the character select area:
Confirms the input of a character.
Press a/b to register the selected service to any
of the 4 favourite groups (None, Fav 1 ... Fav 4)
and then press OK. An icon displays indicating
the favourite status.
• Do not press END to exit the screen here if you wish
to register the change.
Language
Select language settings for audio (if a programme is
broadcast in more than one language) and MHEG5
service.
6
7
Press OK.
1
2
Press OK while the cursor is on “Language”.
Now you can easily select your favourite service
from the Programme List. (See page 24.)
Press a/b to select “1st Pref. Audio”, “2nd Pref.
Audio”, “3rd Pref. Audio” or “MHEG”.
NOTE
• You cannot register the same service to two or more
favourite groups.
3
Select a desired language for each item.
NOTE
• See page 16 to change the language displayed on-screen.
• See page 24 to change the subtitle language.
• See page 24 for details on the MHEG5 service.
G Lock
When the service is locked, you must enter your PIN
whenever you tune to the service.
Available language list
4
Press 2 on the remote control.
Basque
Catalan
Croatian
Czech
Danish
Dutch
French
Gaelic*
Gallegan
German
Greek
Portuguese
Russian
Serbian
Slovak
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
An icon displays indicating the service is locked.
• Pressing 2 will turn the lock icon on and off. (PIN
entry is required when lifting the lock icon.)
• Do not press END to exit the screen here if you wish
to register the change.
Spanish
Swedish
Turkish
Italian
Norwegian
Polish
English*
Finnish
Welsh*
* Languages available for MHEG5 service
5
Press OK.
NOTE
• See page 14 for setting the PIN.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV menu operations
G Move
G Select
Sort the order of the selected service by moving the
service position.
Use this function to jump to the specific service in one
step. This is useful when there are many services
displayed on screen to scroll through.
4
5
Press 3 on the remote control. An icon displays
indicating the service to be moved.
4
5
Press 6 on the remote control. Now you can
change the service number on the left side of the
screen.
• Pressing 3 will turn the move icon on and off.
Move the selected service to the desired position
using a/b, and then press OK.
• Do not press END to exit the screen here if you wish
to register the change.
Enter the number using 0–9 numeric buttons, and
then press OK. The highlight moves to the
selected service.
6
Press OK to register the change.
G Erase
EXAMPLE:
Erase the selected service(s) from the memory.
Moving “002 ZDF” ahead of “001 ARD”.
Default order: Press a/b to select the desired service in
001rs002rs003rs004.
4
Press 7 on the remote control. An icon displays
indicating the service to be erased.
Sorted order: Press a/b to select the desired service in
002rs001rs003rs004.
• Pressing 7 will turn the erase icon on and off.
• Do not press END to exit the screen here if you wish
to register the change.
001 ARD
002 ZDF
003 SAT. 1
004 RTL
002 ZDF
001 ARD
003 SAT. 1
004 RTL
s
5
6
Press OK.
• A confirmation message displays.
Press c/d to select “Yes”, and then press OK.
G Move To
G Label
Use this function to change the position of two selected
services.
Change individual service names.
4
5
Press 4 on the remote control.
4
5
Press 8 on the remote control. A character set
screen displays.
Enter the number you want to change to using
0–9 numeric buttons, and then press OK. The
positions of the selected services are switched.
• Do not press END to exit the screen here if you wish
to register the change.
Enter new name for the service. See page 19 for
operations using the character set screen.
G View
• You cannot enter a service number that is not listed.
Tune to the service shown in the picture window.
6
Press OK again, the message “Successfully
updated” displays.The change is now registered.
4
5
Press 9 on the remote control.
• The image shown in the picture window changes.
001 ZDF
002 ARD
003 SAT. 1
004 RTL
001 RTL
002 ARD
003 SAT. 1
004 ZDF
Press END to exit the Programme Setup screen
to view the image in full screen.
s
Installation
G Skip
Services that are set to skip will not be picked up when
This section describes how to reconfigure the DTV
settings after conducting Initial auto installation
(DTV) on page 7.
pressing P (s/r).
4
Press 5 on the remote control. An icon displays
indicating the service to be skipped.
• Pressing 5 will turn the skip icon on and off.
• Do not press END to exit the screen here if you wish
to register the change.
Auto Installation
The TV automatically detects and stores all available
services in your area. See Initial auto installation
(DTV) on page 7 for details.
5
Press OK.
NOTE
NOTE
• If the TV detects a new carrier/service that has become
available after performing “Auto Installation”, the message
“Do you want to save?” displays.
• To view services that are set to be skipped, use 0–9
numeric buttons or select from the Programme List.
Carrier Scan
Manually add a new carrier by entering the desired
carrier number or frequency band.
1
Press c/d to select “Installation”.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV menu operations
2
Press a/b to select “Carrier Scan”, and then
press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
System Setup
Configure On-Screen Display and Child Lock settings.
OSD Setup
Channel
35
The On-Screen Display appearance and the position/
duration of the service banner information can be
customised.
Frequency (kHz)
554000
1
2
Press c/d to select “System Setup”.
3
Press a/b to select “Channel”, then c/d to enter
the carrier number, and then press OK.
• The frequency of the selected carrier in the below
cell changes correspondingly.
Press a/b to select “OSD Setup”, and then press
OK.
Banner timeout
Banner position
Transparency
4 Secs
Bottom
20%
4
5
After the scan is complete, the screen shows all
available services for the selected range.
A confirmation message displays. Press c/d to
select “Yes”, and then press OK to save the
change.
3
4
Press a/b to select the desired item.
NOTE
Press c/d to select the desired parameter, and
then press OK.
• You can directly enter the frequency instead of step 3. In
this case, select “Frequency (kHz)”, enter the number
using 0–9 numeric buttons, and then press OK.
Use c/d to move between the digits.
5
A confirmation message displays. Press c/d to
select “Yes”, and then press OK to save the
change.
• After performing “Carrier Scan”, the order stored by using
the “Move” function will revert to the default order.
• See page 14 for setting the PIN.
OSD Setup Selectable
Description
items
items
Banner
timeout
1 Sec/2 Secs/
... 7 Secs/None banner information appears on
screen.
Select how long the service
Carrier Setup
This is provided for you to rename (label), erase, or
re-scan carriers. “Carrier” in this context refers to a
service station that provides a set of individual
services.
Banner
position
Top/Bottom
Select whether the service
banner information appears on
top or bottom of the screen.
*Transparency
None/10%/
20%/ ...50%
Select the desired level of On-
Screen Display transparency.
1
2
Press c/d to select “Installation”.
Press a/b to select “Carrier Setup”, and then
press OK.
* The transparency for Service banner displays is not adjustable.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
Child Lock
This function allows TV and Radio services to be
restricted. It prevents children from watching violent
or sexual scenes that may be harmful.
S.No Carrier Name
Frequency
TV
Radio
001
002
003
004
BBC
538000
546000
554000
592500
05
06
04
06
03
08
00
02
BBC
Canal+
Digital5
1
2
Press c/d to select “System Setup”.
Press a/b to select “Child Lock”, and then press
OK.
1 To rename the selected carrier:
3
4
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
Select the carrier, and then press RED (Label).
The character set screen displays.
Enter a new name for the carrier. (See page 19.)
Press c/d to select the desired age/rating (4
...18/Universal/Parental/X-rated/None), and then
press OK.
2 To erase the selected carrier:
Select the carrier, and then press GREEN (Erase).
An icon displays indicating the carrier to be erased.
Pressing GREEN will turn the erase icon on and off.
• When Sweden is selected in the country setting of
Auto Installation, choose from “None”, “Children”,
“Youth” and “Adult”. (Please contact the
organizations concerned for details.)
3 To re-scan the selected carrier:
Select the carrier, and then press BLUE (Rescan).
Re-scanning starts.
NOTE
• “Universal” and “Parental” are the ratings used exclusively
in France.
• “X-rated” is the rating used exclusively in Spain.
• For details about ratings see page 28.
NOTE
• After re-scanning the selected carrier, the order stored
by using the “Move” function will revert to the default order.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV menu operations
NOTE
Accessories
• To scan all carriers for upgrade availability, perform the
manual upgrade.
Check the version information of the digital module
and allow it to be upgraded (when available).
• The software upgrade may take about 30 minutes, but
may take longer (up to 1 hour) depending on the signal
status. While updating, you cannot switch to TV or external
input mode or enter standby mode using B on the remote
control unit.
Version (Software version)
1
2
Press c/d to select “Accessories”.
Common Interface
Press a/b to select “Version”, and then press
OK.
• The software version is displayed.
Check the detailed information on the CI module
(Common Interface module) and CA card (Conditional
Access card) in use.
Software Upgrade
1
2
Press OK while the cursor is on “Common
Interface”.
• The CI module name is displayed.
Press OK to access the CI menu.
• Detailed information on the CA card in use is
displayed.
The software for controlling the built-in DTV decoder
can be upgraded when necessary. In Great Britain and
Sweden, this can be achieved via an Over Air
Download.
G Preparation
3
Press a/b to select the item, and then press OK.
• Detailed information on the selected item is
displayed.
Confirm and make a note of the current software
version number as in step 2 of Version (Software
version).
Inserting a CA card
G Manual upgrade
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of your TV set.
The CI module and the CA Card are not supplied
accessories. They are usually available from your
dealer.
1
2
Press c/d to select “Accessories”.
Press a/b to select “Software Upgrade”, and
then press OK.The TV checks all carriers if there
is a new software available for upgrade.
1 If upgrade via Over Air Download is available at
the time:
A confirmation message appears asking you to
accept the upgrade or not.
To download now, select “Yes”. After the upgrade
is completed, the TV restarts automatically with the
new software version installed.
CA card
To postpone the download, select “No”. Enter a
more convenient download time as instructed.
The software upgrade will not be carried out if there
is no new software available at the specified
download time.
Common Interface
Module
2 If upgrade via Over Air Download is NOT
When the compatible card is not inserted:
available at the time:
1 Select the programme which needs the compatible
CA card.
A message tells you that there is no software
available to be downloaded.
• The caution screen appears.
3
Check the new software version number to confirm
the successful upgrade.
2 Insert the compatible CA card.
• The caution screen disappears and you can view
the programme.
G Auto upgrade
CA system supported by: Crypto Works, Aston CAM,
VIAccess, Nagra Vision, Irdeto, MR CAM
1
When you tune to the service that provides the
upgrade via Over Air Download, a confirmation
message displays.
NOTE
• To view paid TV broadcasting, you need to make a contract
with a service provider.
2
3
Follow the screen prompts.
Check the new software version number to confirm
the successful upgrade.
Please contact a service provider for details.
CAUTION
• Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features (DTV)
Using the EPG Timer
About EPG
When the Timer is set, the TV automatically tunes to a
preset TV event when its on-air time begins.
With the Electronic Programme Guide (EPG), you can
check the schedule of DTV and Radio events, view
detailed information about them, tune to an event
currently on-air and set a timer for future events.
1
2
Press EPG.
Press a/b/c/d to select the desired event to
be preset from the Event name list, and then press
OK (OK/Timer).
3
General EPG screen
070
BBC News
16/04/2005
1
2
• Select an event not yet started.
07:00 – 07:30
***
The Bold and Beautiful
3
Press RED (Timer Mode), and then press a/b
to select the desired parameter (Once, Daily,
Weekly, or Monthly), and then press OK.
• Once set, the preset event is indicated with an
orange background in the EPG event name list.
• To cancel the preset, select the event and press
GREEN (Delete Timer).
*
Services
07:00
08:00
***
09:00
BBC News
BBC 1
The B
***
***
***
***
***
***
***
***
4
BBC 2
***
***
***
CBBC Channel
***
***
S.No Service name
070 BBC News
Mode
Date
Time Duration
Once
04/11/05 07:00 00:30
1
Service name
Event name
5
Once
Daily
2
Weekly
Monthly
* Programme information
3
4
Picture window
Service list
NOTE
• Shows the list of all services currently available.
• This function cannot be set for locked services or when
Child Lock applies. (See pages 19 and 21.)
5
Event name list
• Up to 8 events can be preset using the Timer function.
• If you are watching another event, an alarm message
displays on the screen a few seconds before the preset
time.
• The TV power may not come on for several seconds if
you preset an event using the EPG Timer and if the AC
cord has been disconnected.
• When you set the EPG Timer, the power consumption
during the standby mode will be higher (16 W or more)
than normal. You can reduce the power consumption by
turning off the TV or removing the AC cord, but the EPG
Timer will not operate in this case.
• Shows the names of current events in a grid of rows
and columns. You can check scheduled event
information up to several days ahead, depending
on conditions.
•
If a received programme does not contain a name, either
“No event name” or a blank space will be displayed.
However, the programme can still be watched.
Using the EPG
1
Press EPG.
• Pressing RADIO will switch between DTV and Radio
G When using the EPG Timer for recording:
• Make sure to set the timer of your recording equipment
as well.
• Do not switch channels while recording.
• If the TV is in standby mode when the preset on-air time
nears, it will output signals for recording without displaying
images on the screen.
mode.
2
Press a/b/c/d to access the desired service
or event.
• There is a slight lag from the time of the a/b/c/d
operations to the time the “Programme information”
and “Picture window” display is affected.
• The image shown in the picture window changes.
Using the ESG
In the Service list:
1 Press a/b to scroll the page up/down. Or,
The Electronic Service Guide (ESG) is a simplified
version of EPG, giving you only essential information
of current events for faster access.
2 Press RED (Page l) or GREEN (Page k) to
skip to the previous/next page in one step.
In the Event name list:
1
2
Press ESG.
• The ESG screen displays.
Press a/b to select a desired service, and then
press OK.
1 Press c/d to scroll the page left/right. Or,
2
Press YELLOW (Prev.Day) or BLUE (Next Day)
to skip to the previous/next day in one step.
• The TV will show the image in full screen.
NOTE
3
To watch an event currently on-air, press OK (OK/
Timer).
• Basic operation procedures are similar to EPG operations.
• ESG does not provide information about future events, or
access to Timer function.
• The TV will show the image in full screen.
• Selecting an event that has not yet started will
activate the EPG Timer mode instead.
NOTE
•
Pressing p opens the EPG Description screen that provides more
information about the selected event. Press p or END to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Useful features (DTV)
Service banner
Using the digital programme list
Q
W
E
R T Y U I O
Select services by using the Programme List instead
of using 0–9 numeric buttons or P (s/r).
1
7
BBC 1
BBC
07:45
04/11/2005
MHEG
07:00
Business news
08:00
1
Press OK when no other menu screen is displayed.
(Except when an external input source is
selected.)
P
{
}
Fav Type
All
U
I
O
P
{
}
Lock status
Q
Logical channel
number
S.No
Services
001
002
003
004
005
006
CBBC Channel
BBC News
BBC 1
Scrambled service
Multi audio status
Current event name
Current date and time
W
E
R
T
Y
Service name
Carrier BBC
Freq
FFT
GI
538000 kHz
Carrier name
BBC 2
8K
1/8
64
Canal +
Favourite type
Teletext available
Subtitle available
QAM
UK Gold
MHEG5 service
available
Currently tuned service
Service shown in picture window
2
To display more detailed information, press p
again.
• You can verify the signal strength and quality of the
selected service here.
2
3
4
The screen shows the service list in either TV or
Radio mode sorted by favourite type (All, Fav 1–
4) as configured in page 19.
Using the multi audio function
Press a/b to select the desired service, and then
press OK.
• The image shown in the picture window changes.
Change the audio mode and language for the currently
viewed service.
Press END to exit the Programme List to watch
the image in full screen.
1
Press K when no other menu screen is
displayed.
Displaying subtitles
Audio Mode
Stereo
Set the desired language for the subtitle display and
enable/disable the subtitle display.
S.No Language Code
Audio Type
PID
1
2
3
4
Eng
Fre
Ger
Fin
MPEG2
MPEG2
MPEG2
MPEG2
1211
1212
1213
1214
1
2
Press [ when no other menu screen is displayed.
Press a/b to select “Language”, c/d to select the desired
language available in the stream, and then press b.
3
4
Select“Subtitle”, press c/d to select “On”or “Off”.
2
3
Press c/d to select the desired audio mode (Left,
Right, L+R, Stereo), and then press b to move
down.
• A confirmation message displays.
Press c/d to select “Yes”, and then press OK.
Press a/b to select the desired language
available for the service, and then press OK.
NOTE
• When “Subtitle” is set to “On”, the TV will automatically
start subtitle presentation if tuned to a programme
containing subtitle data.
NOTE
• Once you tune to another service or the power is turned
off, the setting returns to the parameter set in the Language
menu. (See page 19.)
• Even if you press [, the message “No subtitle” may
appear instead of the Subtitle menu screen despite the
programmes containing subtitle data.
In this case, press m first to activate the teletext mode,
then press [.
Using the MHEG5 application (UK only)
If you set the country setting of Auto Installation to one of the 4
Nordic countries (Sweden, Norway, Finland, or Denmark):
• Subtitle is set to “On” when you turn off the power or
change the channel.
When another country is selected:
• Subtitle is set to “Off” when the power is turned off.
Some services bring you programmes with the MHEG
(Multimedia and Hypermedia Expert Group)
application encoded, letting you experience DTV
interactively.
If provided, the MHEG5 application will start when you
press m.
Viewing a service banner
NOTE
• When “Subtitle” is set to “On”, and the TV is tuned to a
service containing both MHEG5 and subtitle data, the
subtitle takes priority and subtitle presentation starts
automatically. In this case press m to start the MHEG5
presentation.
A service banner shows event names, start/end time
of event, and other useful information.
1
Press p.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Possible Solution
• No power.
• Check if you pressed B on the remote control unit. (See page 7.)
If the indicator on the TV lights up red, press B.
• Is the AC cord disconnected? (See page 3.)
• Check if you pressed a on the TV. (See page 7.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off, or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not • Are batteries inserted with polarity (e, f) aligned? (See page 4.)
operate.
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated to remote control sensor?
• Picture is cut off.
• Is the image position correct? (See page 14.)
• Are screen mode adjustments (4:3 Mode/WSS) such as picture size made
correctly? (See pages 15 and 17.)
• Strange colour, light colour, or • Adjust the picture tone. (See pages 10 and 11.)
dark, or colour misalignment.
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 13 and 16.)
• Power is suddenly turned off.
• The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
• Check the power control setting. (See page 12.)
• Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off.
• No picture.
• Is connection to other components correct? (See pages 8 and 9.)
• Is input signal type selected correctly after connection? (See page 16.)
• Is the correct input source selected? (See page 8.)
• Is non-compatible signal being input? (See page 27.)
• Is picture adjustment correct? (See pages 10 and 11.)
• Is the antenna connected properly? (See page 3.)
• Is “On” selected in “Audio Only”? (See page 16.)
• No sound.
• Is the volume too low? (See pages 5 and 6.)
• Make sure that headphones are not connected. (See page 6.)
• Check if you pressed e on the remote control unit. (See page 5.)
• The DTV menu screen is • Check if “Monochrome” is set to “On”. If so, set it to “Off”. (See page 11.)
displayed in monochrome and
hard to select the item.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to e60°C.
IMPORTANT NOTE ON RESETTING THE PIN
We suggest that you remove the following instruction from the operation manual to prevent children from
reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in
a safe space for future reference.
1
Repeat steps 1 to 3 in Changing the PIN. (See
page 14.)
2
Enter “3001” to cancel out the current PIN.
• The PIN resets to the factory preset “1234”.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Commands
RS-232C port specifications
CONTROL ITEM
POWER SETTING
COMMAND PARAMETER
CONTROL CONTENTS
P
I
O
T
W
G
V
R
D
D
V
0
_
_
_
*
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
POWER OFF (STANDBY)
INPUT SWITCHING (Toggle)
TV (CHANNEL FIXED)
DTV (CHANNEL FIXED)
EXT1 – 5 (1 – 5)
PC Control of the TV
INPUT SELECTION A
When a program is set, the TV can be controlled from the PC
using the RS-232C terminal. The input signal (PC/video) can
be selected, the volume can be adjusted and various other
adjustments and settings can be made, enabling automatic
programmed playing. Attach an RS-232C cable cross-type
(commercially available) for the connections.
I
T
I
D
A
C
H
H
T
I
V
D
H
P
CHANNEL
D
C
C
C
U
D
*
TV DIRECT CHANNEL (1 – 99)
CHANNEL UP
_
_
_
_
W
CHANNEL DOWN
THREE DIGIT DTV DIRECT CHANNEL
(1 – 999) (Non-Nordic countries)
NOTE
D
D
T
T
V
V
D
D
*
*
*
*
*
*
_
*
• This operation system should be used by a person who is
accustomed to using PCs.
FOUR DIGIT DTV DIRECT CHANNEL
(1 – 9999) (Nordic countries only)
D
D
I
T
T
N
N
N
V
V
V
V
V
V
V
V
O
P
P
P
P
L
H
I
U
D
P
P
W
1
_
_
2
3
4
0
1
2
3
4
5
6
7
*
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
DTV CHANNEL UP
DTV CHANNEL DOWN
EXT1 (Y/C)
INPUT SELECTION B
I
P
1
EXT1 (CVBS)
I
P
1
EXT1 (RGB)
AV MODE
SELECTION
A
A
A
A
A
A
A
A
V
M
M
M
M
M
M
M
M
L
D
D
D
D
D
D
D
D
M
S
AV MODE SELECTION (Toggle)
STANDARD
RS-232C serial control cable
(cross type, commercially available)
MOVIE
GAME
Communication conditions
USER
Set the RS-232C communications settings on the PC to match
the TV’s communications conditions. The TV’s communications
settings are as follows:
DYNAMIC (FIXED)
DYNAMIC
PC
• Baud rate: 9,600 bps
• Data length: 8 bits
• Parity bit: None
• Stop bit: 1 bit
• Flow control: None
VOLUME
VOLUME (0 – 60)
H-POSITION AV (
מ 10 – 10) H-POSITION PC (0 – 180)
V-POSITION AV (
מ 20 – 20) V-POSITION PC (0 – 120)
CLOCK (0 – 180)
PHASE (0 – 15)
WIDE MODE (Toggle)
NORMAL (AV/PC)
ZOOM 14:9
POSITION
H
H
V
O
O
O
O
C
S
*
*
S
*
*
*
Communication procedure
S
*
*
*
Send the control commands from the PC via the RS-232C
connector.
The TV operates according to the received command and sends
a response message to the PC.
Do not send multiple commands at the same time. Wait until
the PC receives the OK response before sending the next
command.
V
S
*
*
*
C
P
K
E
*
*
*
*
*
*
WIDE MODE
W
W
W
W
W
W
W
W
M
M
M
A
O
O
O
O
O
O
T
D
D
D
D
D
D
D
D
T
E
0
1
2
3
4
5
6
8
0
1
2
_
0
1
2
3
4
5
0
1
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
I
E
I
E
I
E
PANORAMA
I
E
FULL (AV/PC)
Command format
I
E
CINEMA 16:9
Eight ASCII codes e CR
I
E
CINEMA 14:9
I
E
DOT BY DOT (PC)
MUTE (Toggle)
MUTE ON
C1 C2 C3 C4 P1 P2 P3 P4
MUTE
U
U
U
C
F
F
F
F
F
F
E
E
C
E
T
E
Command 4-digits
Parameter 4-digits
Return code
T
E
MUTE OFF
AUDIO CHANGE
SLEEP TIMER
H
T
A
M
M
M
M
M
M
T
SOUND SELECT (ST/Bilingual/mono)
OFF
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, g, blank, ?
T
30 m
T
1 h 00 m
Parameter
T
1 h 30 m
Input the parameter values, aligning left, and fill with blank(s)
for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not within an adjustable range,
“ERR” returns. (Refer to “Response code format”.)
T
2 h 00 m
T
2 h 30 m
TEXT
X
TEXT OFF
T
X
T
TEXT CHANGE (Toggle)
DIRECT PAGE JUMP (100 – 899)
D
P
G
0
0
–
3
0
0
0
0
0
5
5
NOTE
0
0
9
1
• If an underbar (_) appears in the parameter column, enter a
space.
• If an asterisk * appears, enter a value in the range indicated in
brackets under CONTROL CONTENTS.
When “?” is input for some commands, the present setting value
responds.
?
?
?
?
?
Response code format
Normal response
O
K
Return code (0DH)
Problem response (communication error or incorrect command)
E
R
R
Return code (0DH)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Item
18.5o LCD COLOUR TV, Model: LC-19D1E/LC-19D1S
LCD panel
18.5o Advanced Super View & Black TFT LCD
Resolution
1,049,088 pixels (1366 g 768)
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
ITU-R (B/G, I, D/K, L, L’)
TV
TV-Standard Analogue
Function
Digital
DVB-T (2K/8K OFDM)
Receiving
Channel
VHF/UHF
CATV
E2–E69ch, F2–F10ch, I21–I69ch, IR A–IR Jch, (Digital: E5-E69ch)
Hyper-band, S1–S41ch
TV-Tuning System
Auto Preset 999 ch: non-Nordic / 9999 ch: Nordic (ATV: 99 ch), Auto Label, Auto Sort
NICAM/A2
STEREO/BILINGUAL
Brightness
300 cd/m2
Backlight life
60,000 hours (at Backlight Standard position)
H : 176° V : 176°
Viewing angles
Audio amplifier
Speaker
2W g 2
75 mm g 30 mm
Antenna input
UHF/VHF 75q Din type (Analogue & Digital)
9 pin D-sub male connector
Terminals
RS-232C
EXT 1
EXT 2
EXT 3
EXT 4
EXT 5
SCART (AV input, Y/C input, RGB input, TV output)
S-VIDEO (Y/C input), RCA pin (AV input)
RCA pin (Audio input), Component in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
HDMI (VGA, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz), RCA pin (Audio input)
Ø 3.5 mm jack (Audio input), 15 pin mini D-sub (PC)
C. I. (Common Interface)
Headphones
EN50221, R206001
Ø 3.5 mm jack (Audio output)
OSD language
Czech/Dutch/English/Finnish/French/German/Greek/Hungarian/Italian/Polish/Portuguese/
Russian/Slovak/Spanish/Swedish/Turkish
Power Requirement
AC 220–240 V, 50 Hz
42 W (0.9 W Standby) (Method IEC60107)
4.9 kg (Display only), 5.4 kg (Display with stand)
0°C to e40°C
Power Consumption
Weight
Operating temperature
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
NOTE
• Refer to inside back cover for dimensional drawings.
PC compatibility chart (EXT 5 only)
Horizontal
Frequency
Vertical
Horizontal
Frequency
Vertical
VESA
VESA
Resolution
720 g 400
Resolution
1024 g 768
Frequency
Frequency
Standard
Standard
31.5 kHz
37.9 kHz
37.9 kHz
31.5 kHz
37.9 kHz
37.5 kHz
43.3 kHz
31.0 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
53.7 kHz
70 Hz
85 Hz
85 Hz
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
—
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
48.4 kHz
56.5 kHz
60.0 kHz
68.7 kHz
44.8 kHz
47.8 kHz
47.7 kHz
60 Hz
70 Hz
75 Hz
85 Hz
60 Hz
60 Hz
60 Hz
ꢀ
ꢀ
ꢀ
ꢀ
—
ꢀ
ꢀ
640 g 400
720 g 400
640 g 480
640 g 480
640 g 480
640 g 480
1024 g 768
1024 g 768
1024 g 768
1280 g 720
XGA
VGA
WXGA 1280 g 768
1360 g 768
WVGA 848 g 480
800 g 600
VGA, WVGA, SVGA, XGA and WXGA are registered
trademarks of International Business Machines Corp.
800 g 600
SVGA 800 g 600
800 g 600
NOTE
• This TV has only limited PC compatibility, correct operation can
only be guaranteed if the video card conforms exactly to the
VESA 60Hz standard. Any variations from this standard will result
in picture distortions.
800 g 600
27
Download from Www.Somanuals.com. All Manuals Search And Download.
End of life disposal
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that
requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used
electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local
retailer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
Attention:Your product
is marked with this
symbol. It means that
used electrical and
electronic products
should not be mixed
with general household
waste. There is a
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately
beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative effects on the environment and human health which
could otherwise arise due to inappropriate waste handling.
separate collection
system for these
products.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product.You might be charged
for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your
local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used
products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of
disposal.
Rating table for Child Lock
Broadcasted
rating
AGE
User-
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18
adjusted rating
Universal
ꢀ
—
—
—
—
—
—
—
ꢀ
—
—
ꢀ
—
—
ꢀ
—
—
ꢀ
—
—
ꢀ
—
—
ꢀ
—
—
ꢀ
—
—
ꢀ
—
—
ꢀ
Parental
X-rated
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
—
ꢀ
Broadcasted
rating
Universal
Parental
X-rated
User-
adjusted rating
Universal
—
—
—
Parental
X-rated
ꢀ
ꢀ
—
—
—
ꢀ
28
Download from Www.Somanuals.com. All Manuals Search And Download.
LC-19D1E/LC-19D1S
[mm]
68.2
75.0
(68,2) (75,0)
462.0
(462,0)
49.0
(49,0)
411.8
(411,8)
196.0
(196,0)
240.0
(240,0)
100.0
(100,0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Spain
Gedruckt in Spanien
Imprimé en Espagne
Stampato in Spagna
Gedrukt in Spanje
Impreso en España
Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
TINS-D222WJZZ
PIN
08P06-SP-NG
Download from Www.Somanuals.com. All Manuals Search And Download.
|