Shark Electric Steamer SC637 User Manual

OWNER’S GUIDE  
SC637  
SC637C  
U.S.:  
EURO-PRO Operating LLC  
Boston, MA 02465  
Canada: EURO-PRO Operating LLC  
4400 Bois Franc  
Ville St. Laurent, Québec H4S 1A7  
1-800-798-7398  
COPYRIGHT© EURO-PRO OPERATING LLC 2009  
PRINTED IN CHINA  
REV. 090505  
Illustrations may differ with actual product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
10. Loop the power cord and the hose  
loosely around the appliance when  
storing.  
5. DO NOT lay the hose on the ground  
or wind it unnecessarily.  
6. CAUTION: Never fill the garment  
steamer with fabric conditioner,  
starches, chemicals or any other  
solution, as these will damage the  
steam mechanism. Use only tap  
water or distilled water if the tap  
water in your area is very hard.  
Use of anything other than tap  
water will automatically void your  
warranty.  
11. DO NOT remove the hose from the  
main unit when the appliance is in  
operation as scalding may occur.  
12. Always disconnect the garment  
steamer from the electrical outlet  
when filling with water, emptying or  
when not in use.  
13. Never hang the unit up by the hose  
when storing.  
7. WARNING! TO AVOID FIRE, never  
leave the appliance unattended  
while it is plugged in.  
14. The use of accessory attachments  
not recommended by the appliance  
manufacturer may cause hazard or  
injury.  
8. WARNING! TO PREVENT  
ELECTRIC SHOCK, never use the  
garment steamer in a location  
where it can fall or be pulled into  
water or any other liquid. If the  
appliance falls into water or any  
other liquid, unplug it immediately.  
DO NOT reach into the water or  
liquid to remove it.  
15. Burns can occur from touching  
hot metal parts, hot water or  
steam. Use care when emptying  
the appliance as there may be hot  
water in the reservoir.  
16. Never direct steam at people,  
animals or steam clothes while they  
are being worn.  
9. DO NOT operate the garment  
steamer in the presence of  
SPECIAL INSTRUCTIONS  
explosive and/or flammable fumes.  
1. To avoid a circuit overload, do not  
operate another high-wattage  
appliance on the same circuit.  
10. DO NOT handle the plug or the  
garment steamer with wet hands or  
operate without shoes.  
2. If an extension cord is absolutely  
necessary, use a 15-ampere cord.  
Cords rated for less amperage may  
overheat. Use care to arrange the  
cord so that it cannot be pulled or  
tripped over.  
11. When in use, never turn the  
appliance over or on its side. Never  
direct steam towards people,  
animals or plants.  
12. CAUTION: Hose, nozzle and  
accessories can become hot during  
use. Never hold, pull or relocate  
the appliance by the hose. Hold the  
steamer head by the handgrip and  
never by the hose.  
3. Always allow appliance to cool  
completely for at least 30 minutes  
before storing.  
4. DO NOT use the garment steamer  
without properly filling the water  
reservoir. Always check the water  
level before and during use.  
12  
TOLL FREE: 1-800-798-7398  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MODEL SC637  
English  
Quick Start  
ONE (1) YEAR LIMITED WARRANTY  
EURO-PRO Operating LLC warrants this product to be free from defects in material and  
workmanship for a period of one (1) year from the date of the original purchase, when utilized for  
normal household use, subject to the following conditions, exclusions and exceptions.  
If your appliance fails to operate properly while in use under normal household conditions  
within the warranty period, return the complete appliance and accessories, freight prepaid. For  
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC  
will repair or replace it free of charge. Proof of purchase date and $ 9.95 to cover the cost of  
return shipping and handling must be included. *  
1
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or  
replacement of the unit at our option. This warranty does not cover normal wear of parts and  
does not apply to any unit that has been tampered with or used for commercial purposes. This  
limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage  
due to faulty packaging or mishandling in transit. This warranty does not cover damage or  
defects caused by or resulting from damages from shipping or repairs, service or alterations to  
the product or any of its parts, which have been performed by a repair person not authorized by  
EURO-PRO Operating LLC.  
2
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or  
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to  
the specific obligations expressly assumed by it under the terms of the limited warranty. In no  
event is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature  
whatsoever. Some states/provinces do not permit the exclusion or limitation of incidental or  
consequential damages, so the above may not apply to you.  
4
3
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state or province to province.  
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of  
purchase date and to attach tag to item before packing with your name, complete address and  
phone number with a note giving purchase information, model number and what you believe  
is the problem with item. We recommend you insure the package (as damage in shipping is  
not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER  
SERVICE”. We are constantly striving to improve our products, therefore the specifications  
contained herein are subject to change without notice.  
OWNERSHIP REGISTRATION CARD FOR  
CANADIAN CONSUMERS ONLY  
Please complete and return within ten (10) days of purchase. The registration will enable  
us to contact you in the event a product defect is discovered. By returning this card you  
acknowledge to have read and understood the instructions for use, and warnings set  
forth in the accompanying instructions.  
STEAM  
ASSEMBLE  
Insert the steam hose into the  
steam hose connector.  
4
5
Plug in the garment steamer,  
press the switch to the “On”  
position.  
1
2
Attach the steam nozzle bonnet  
over the steam nozzle.  
Hold the steam nozzle directly  
onto the clothing. Start steaming  
your garment in an up and down  
vertical motion while holding the  
garment.  
RETURN TO: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Quebec H4S 1A7  
PURCHASER: ……………………………………………………………………………………………............  
ADDRESS: ………………………………………………………………………………………………...............  
FILL  
3
Remove the water tank cap. Fill  
the water tank to the “Max Fill”  
line using the filling flask and  
funnel. Do not overfill the tank.  
Replace the water tank cap and  
secure.  
IMPORTANT: Never steam any  
article of clothing while it is  
being worn.  
SC637 SC637C  
DATE OF PURCHASE: …………………….. MODEL: ………………...................................  
NAME AND ADDRESS OF STORE: …………………………………………………………………..  
11  
TOLL FREE: 1-800-798-7398  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble Shooting  
Hang the nozzle on the  
door hook while the  
garment steamer is  
heating up.  
POSSIBLE  
REASONS  
PROBLEM  
SOLUTIONS  
Verify that the green light on the  
unit is lit. If not, check that the unit  
is plugged in and the on/off button  
is raised and in the “On” position.  
The steamer is not  
turned on.  
5
There is no  
steam.  
There is not enough  
water in the unit.  
Verify that the water line is above  
the “Refill” line. If not, add more  
water to the tank.  
6
Lift the nozzle so that the hose is  
vertical for a few minutes or until  
steam starts again.  
There is condensation  
buildup in the hose.  
There is not  
enough steam.  
There is not enough  
water in the unit.  
Verify that the water line is above  
the “Refill” line, if not add more  
water to the tank.  
It is recommended to use the  
steam bonnet on the nozzle to  
prevent water drops being left  
on the garment and to improve  
performance.  
You are not using the  
steam bonnet.  
The nozzle  
leaves water  
drops on the  
garment.  
The steam bonnet is  
too wet.  
After letting the steam nozzle cool,  
remove the steam bonnet and let it  
dry out before using again.  
There is condensation  
buildup in the hose.  
STRAP IN  
Lift the nozzle so that the hose is  
vertical for a couple minutes or until  
steam starts again.  
6
OPTIONAL: Snap the shoulder  
strap hooks onto the connecting  
rings on the unit body. The  
detachable shoulder strap  
allows for greater freedom of  
movement when both hands are  
needed for various steaming  
tasks.  
A gurgling or  
bubbling noise  
is coming from  
the hose  
Lift the nozzle so that the hose  
is vertical for a couple minutes  
or until steam starts again. It is  
recommended that the hose is  
vertical during use.  
IMPORTANT: Empty the  
water from the water tank  
after every use  
There is condensation  
buildup in the hose.  
IMPORTANT: Hose, nozzle and  
accessories can become hot  
during use. Scalding or burns  
may occur from coming into  
contact with hot water or steam.  
or unit.  
10  
TOLL FREE: 1-800-798-7398  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Care of Your Garment Steamer  
CLEANING & STORING  
Turn the garment steamer off.  
CARE & USE OF STEAM  
NOZZLE BONNET  
1
It is recommended that the steam  
2 Make sure the steam nozzle is  
placed on the door hanger to avoid  
condensation.  
nozzle bonnet be removed from the  
steam nozzle after the appliance  
has completely cooled. Hand wash  
the bonnet in cold water with a mild  
detergent after each use and let air  
dry completely before using again.  
Do not dry in clothes dryer.  
3 Unplug the appliance from the  
electrical outlet.  
4 Let the appliance cool completely  
for approximately 30 minutes before  
emptying the water from the  
water tank.  
5 Empty the water from the  
water tank.  
TECHNICAL SPECIFICATIONS  
Voltage: 120V., 60Hz.  
6 Wipe the exterior of the garment  
steamer with a damp cloth and  
wipe dry. Always store your  
Power: 1000 Watts  
Water Capacity: 510 ml (17 oz.)  
appliance indoors in a cool, dry area.  
TOLL FREE: 1-800-798-7398  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Using Your Accessories  
Contents  
1
GETTING STARTED.................................................................2  
USING YOUR GARMENT STEAMER .................................5  
USING YOUR ACCESSORIES...............................................6  
CARE OF YOUR GARMENT STEAMER ...........................9  
TROUBLESHOOTING GUIDE.............................................10  
WARRANTY AND REGISTRATION....................................11  
NOTES.........................................................................................12  
Thank you for  
purchasing  
the Shark  
Garment  
Steamer.  
2
SHOULDER STRAP  
DOOR HOOK  
Using the detachable shoulder  
strap allows for greater freedom  
of movement when both hands  
are needed for various cleaning  
tasks. To attach the shoulder strap  
to the steam cleaner, simply snap  
the shoulder strap hooks onto the  
connecting rings on the unit body.  
1. The steam nozzle should be hung on  
the door hook with the steam vents  
pointing away from the door while  
unit is heating up. When the unit  
emits steam, remove the steamer  
head and place your garment onto  
the hanger head.  
2 Use the door hook to rest the steam  
nozzle to avoiding condensation  
build up.  
8
TOLL FREE: 1-800-798-7398  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Getting Started  
When assembling your garment steamer  
there may be a little water in or around  
the water tank. This is because we test  
all our garment steamers 100% before  
you buy them, so you get a quality  
Shark® garment steamer.  
Always determine the color-  
fastness of any fabric before  
using the garment steamer by  
testing it on a small portion of  
the garment’s underside.  
m
k
o
l
n
1
j
b
a
c
3
d
g
h
f
r
q
i
p
e
2
FIRST THINGS FIRST, YOU NEED TO  
KNOW WHAT’S IN THE BOX YOU  
JUST OPENED:  
YOUR GARMENT  
STEAMER FEATURES  
j
Water Tank  
LINT BRUSH  
3 Gently brush the area that is to be  
a Garment Steamer  
b Funnel  
Use the lint brush to remove hair,  
lint and pet fur while steaming your  
garments.  
steamed going with the grain or the  
nap of the fabric.  
k Filling Inlet  
Handle  
l
4 The lint brush attachment can be  
cleaned by brushing in the opposite  
direction onto a disposable old piece  
of cloth.  
c Filling Flask  
m On/Off Switch  
1
Remove the steam nozzle bonnet  
from the steam nozzle.  
d Steam Hose  
n Power “On” Light  
o Steam Hose Release Button  
p Steam Nozzle  
e Shoulder Strap  
f Door Hook  
2 Attach the lint brush attachment  
onto the steam nozzle by lining up  
the bottom of the steam nozzle  
with the back of the lint brush  
attachment.  
5 When finished using the lint brush  
attachment, unplug the garment  
steamer and let it cool completely  
before removing the lint brush  
attachment.  
g Garment Brush  
h Lint Brush  
q Hand Grip  
r
Steam Hose  
i Steam Nozzle Bonnets (2)  
Then gently push the top of the lint  
brush up into place until the lint  
brush snaps in place.  
2
TOLL FREE: 1-800-798-7398  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Using Your Accessories  
IMPORTANT: Make sure that the  
garment steamer is unplugged and  
completely cool before attaching or  
removing any accessories.  
Use the steam bonnet on  
the nozzle to prevent water  
drops from being left on  
the garment and to improve  
performance.  
1
1
3
2
2
ASSEMBLY  
IMPORTANT: Hose, nozzle and  
GARMENT BRUSH  
3 Gently brush the area that is to be  
steamed going with the grain or the  
nap of the fabric.  
1
Remove the appliance and the  
accessories from the packaging.  
Insert the steam hose into the steam  
hose connector.  
accessories can become hot during  
use. Never hold, pull or relocate  
the appliance by the hose. Hold the  
steamer head by the hand grip and  
never by the hose.  
Use the garment brush to open the  
weave of the fabric for better steam  
penetration.  
4 When finished using the garment  
brush attachment, unplug the  
garment steamer and let it cool  
completely before removing the  
garment brush attachment.  
1
Remove the steam nozzle bonnet  
from the steam nozzle.  
2 Attach the steam nozzle bonnet over  
the steam nozzle.  
2 Attach the garment brush  
attachment onto the steam nozzle  
by lining up the bottom of the steam  
nozzle with the back of the garment  
brush attachment.  
IMPORTANT: Do not plug in or turn  
the appliance “On” until assembly is  
completed.  
Then gently push the top of the  
garment brush up into place until the  
garment brush attachment snaps in  
place.  
6
TOLL FREE: 1-800-798-7398  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Getting Started  
Using Your Garment Steamer  
Steam the underside of the  
garments made of delicate  
fabrics, like silk or velvet.  
3
Practice makes perfect! It  
takes time to get used to and  
master the garment steaming  
techniques.  
1
4
2
2
1
FILLING THE WATER TANK  
Remove the cap from the inlet hole.  
IMPORTANT: Make sure you only  
add water to the tank. Chemicals or  
cleaning solution may damage the  
appliance and could be unsafe for  
you and your family.  
IMPORTANT: Never steam any article  
of clothing while it is being worn.  
4 Holding the steam nozzle with the  
1
steam vents pointing away from you,  
start steaming your garments in an  
up/down vertical motion. Begin at  
the top of the garment and move in  
a downward direction pressing the  
steam nozzle directly onto the fabric.  
2 Using the filling flask and funnel,  
fill the water tank with regular tap  
water up until the “Max” line on the  
water tank. Use tap water or distilled  
water if the tap water in your area is  
very hard. Do not let the water in the  
water tank go below the refill line.  
1
Plug your garment steamer into the  
electrical wall outlet.  
2 Press the “On/Off” switch to the  
“On” position. The power indicator  
light will illuminate once the garment  
steamer is turned on.  
5 Keep the steam nozzle in an upright  
position so that no condensation will  
flow back into the garment steamer.  
3 Hang the steam nozzle on the door  
hook. Wait for the steam to come  
out.  
3 Replace the cap on the filling inlet.  
4
TOLL FREE: 1-800-798-7398  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Convection Oven R 820JS User Manual
Singer Sewing Machine U843A User Manual
Sony Camcorder NEX VG10E User Manual
Sony DVR ICD SX57 User Manual
Sony MP3 Player S10MK2 User Manual
Sony Video Game Console SCPH 50011 User Manual
State Industries Water Heater GP6 50 User Manual
State Industries Water Heater SRT80 120NE User Manual
Subaru Robin Power Products Portable Generator R1210 User Manual
Suzuki Boat DF250SS User Manual