WWW.SHARKCLEAN.COM
LIFT-AWAY™ PRO
STEAM POCKET® MOP
S3901D
OWNER’S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
1
11-07-04 11:07 AM
11. DO NOT unplug by pulling on power
cord. To unplug, grasp the plug not
the power cord. Do not use extension
cords or outlets with inadequate
current carrying capacity.
21. Extreme caution should be
exercised when using this
appliance to clean stairs.
22. Never use steam mop without
micro-fiber cleaning pad attached.
12. DO NOT put any objects into openings.
Do not use with any opening that is
blocked.
23. Keep your work area well lit.
24. Store steam mop indoors in a cool,
dry place.
13. DO NOT put hands or feet under the
steam mop. Unit gets very hot.
25. To avoid circuit overload, do not
operate another appliance on the
same socket (circuit) as the steam
cleaner.
14. In mop mode use ONLY on flat,
horizontal surfaces. Do not use on
walls, counters or windows.
26. If an extension cord is absolutely
necessary, an extension cord rated
a minimum of 15 ampere, 14 gage
cord should be used. Cords rated
for less amperage may overheat.
Care should be taken to arrange
cord so that it cannot be pulled or
tripped over.
15. DO NOT use on leather, wax polished
furniture or floors, synthetic fabrics,
velvet or other delicate, steam sensitive
materials.
16. DO NOT add cleaning solutions,
scented perfumes, oils or any other
chemicals to the water used in this
appliance as this may damage the unit
or make it unsafe for use. If you live in a
hard water area, we recommend using
distilled water in your steam mop.
27 Always unplug and allow the steam
mop to cool before removing or
changing mop heads.
WARNING: Your steam mop
is designed to clean hard floor
surfaces that will withstand high
heat. Do not use on unsealed wood
or unglazed ceramic floors. On
surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by the
heat and steam action. It is always
recommended to test an isolated
area of the surface to be cleaned
before proceeding. We also
17. When in use, NEVER turn the appliance
over or on its side. NEVER DIRECT
STEAM TOWARDS PEOPLE, ANIMALS
OR PLANTS.
18. NEVER LEAVE THE STEAM MOP IN
ONE SPOT ON ANY SURFACE FOR
ANY PERIOD OF TIME WHEN MICRO-
FIBER PAD IS ATTACHED AS THIS
WILL DAMAGE YOUR FLOORS.
19. Carefully remove the micro-fiber
cleaning pad immediately after you
have unplugged and allowed the steam
mop to cool.
recommend that you check the use
and care instructions from the floor
manufacturer.
20.When cleaning the steam mop, unplug
the power cord from the electrical
outlet and clean with a dry or damp
cloth. Do not pour water or use alcohol,
benzene or paint thinner on the unit.
SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
3
11-07-04 11:07 AM
This manual covers model number: S3901D
TECHNICAL SPECIFICATIONS
Voltage:
Power:
Water
120V., 60Hz.
1550 Watts
Capacity: 300ml (10.14 oz.)
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
4
11-07-04 11:07 AM
Contents
Getting Started......................................................................2
Using Your Steam Mop .......................................................5
Using Your Carpet Glider...................................................8
Removable Handheld Steamer........................................9
Care of Your Steam Mop....................................................14
Troubleshooting Guide .......................................................16
Warranty...................................................................................17
Thank you for
purchasing
the Shark®
Lift-Away™ Pro
Steam Pocket®
Mop.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
1
11-07-04 11:07 AM
Getting Started
When assembling your Steam Mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality Shark®
r
s
Lift-Away™ Pro Steam Pocket® Mop.
a
b
c
e
t
u
w
x
d
f
v
g
i
y
h
j
i
j
Versa-Tile™ Mop Head
k
Two-Sided Micro-Fiber Cleaning Pad
for the All-Purpose Mop Head (2)
k
l
Two-Sided Micro-Fiber Cleaning Pad
for the Versa-Tile™ Mop Head (1)
l
m
n
Garment Steamer and Bristle Frame
m Garment Steamer Bonnet
Upholstery Bonnet
n
o Carpet Glider
o
p
q
p Filling Flask
q (1) 6mm x 48mm Large Screw*
r
Quick Release Swivel Cord Wrap
Cord Clips (not shown)
Handheld Release Buttons
Steam Trigger
a
Removable Handheld Steamer
b Steam Mop Housing
Mop Handle
d Accessory Hose
s
t
c
u
v
Water Tank Cap (not shown)
e
f
Direct Steam Nozzle
Flat Scrubber Tool
w ON/Standby Button
x
y
Water Tank
g All-Purpose Scrubber Pad for Flat
Mop Head Release Button
Scrubber Tool
*Phillips or flat head screwdriver can be used.
Screwdriver not included.
h
All-Purpose Mop Head
2
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
2
11-07-04 11:07 AM
Getting Started with Your Steam Mop
fig. 1
fig. 2
STEAM MOP ASSEMBLY
IMPORTANT: Always make sure
the mop is UNPLUGGED from the
wall when not in use. Never fill the
mop, attach the mop head, change
or remove the micro-fiber cleaning
pad when the mop is plugged
1
Insert the Mop Handle end labeled
“Front” into the Steam Mop Housing.
Make sure it is inserted past the
line printed on the pole. Secure the
assembled handle and pole by using
the large screw and a Phillips or a flat
head screw driver (screwdriver not
included). (fig. 1)
into the wall. To prolong the life of
your Shark® Lift-Away™ Pro Steam
Pocket® Mop we recommend using
distilled water. Make sure you only
add water to the tank. Chemicals or
cleaning solution may damage the
appliance and could be unsafe for
you and your family.
2
Insert the Handheld Steamer into the
Steam Mop Housing. (fig. 2)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
3
11-07-04 11:07 AM
Getting Started with Your Steam Mop - cont’d
fig. 5
fig. 3
fig. 6
fig. 4
2
Select either the All-Purpose Mop
Head or Versa-Tile™ Mop Head and
accompanying pad. Use the lavender
loop on the side of the micro-fiber
cleaning pad to slide the mop head
into the pad pocket. Then secure
the quick fasteners on the top of the
pocket to lock in place. (fig. 3)
IMPORTANT: Do not use on unsealed
wood or unglazed ceramic floors.
On surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by
the heat and steam action. It is
always recommended to test an
isolated area of the surface to be
cleaned before proceeding. We
recommend that you check the use
and care instructions from the floor
manufacturer.
3
Snap the mop head into the base to
secure it. (fig. 4)
4
Turn the water tank cap counter
clockwise and remove from the tank.
(fig. 5)
NOTE: To prolong the life of your
Steam Mop, we recommend using
distilled water.
Use the filling flask and pour water
into the tank. Do not overfill. Replace
the cap on the water tank. (fig. 6)
4
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
4
11-07-04 11:07 AM
Using Your Steam Mop
IMPORTANT: Make sure you do not
use the mop without attaching a
micro-fiber cleaning pad and adding
water to the tank first. When you are
using the mop for the first time, it
might take longer than the normal
30 seconds to start steaming.
fig. 8
fig. 7
NOTE: Sweep or vacuum your floors
prior to cleaning with your Steam
Mop.
1
Pull and twist the quick release cord
holder to unwrap the power cord
completely. Plug into a 120-volt
electrical outlet. (fig. 7)
great quick cleaning products to
complement your Steam Mop, such
as the Shark® Navigator™ Lift Away®
(model NV350).
2
The ON/STANDBY button will flash
blue. If the light does not turn on,
reference the troubleshooting section
on page 16. (fig. 8)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
5
11-07-04 11:07 AM
Using Your Steam Mop - cont’d
fig. 10
fig. 9
fig. 11
SELECTING YOUR STEAM SETTING
To better understand which steam
setting to use for your cleaning task,
see page 7.
3
Press the ON/STANDBY button
once for DUST setting (DUST lighted
setting indicator will illuminate).
DUST setting is a light steam for a
quick dusting and best dry time.
(fig. 9)
4
Clean your floors with a forward and
backward motion. (fig. 11)
Press the ON/STANDBY button until
the light flashes to stop the steam.
Press the ON/STANDBY button twice
for MOP. MOP setting is for normal,
everyday steam cleaning. (fig. 10)
NOTE: When using your Shark® Lift-
Away™ Pro Steam Pocket® Mop in
MOP mode be careful not to press
the steam trigger on the Handheld
Steamer, as it will activate STANDBY
mode. If this happens, press the
ON/STANDBY button one time to
reactivate steam.
Press the ON/STANDBY button three
times for SCRUB. SCRUB setting is for
heavy cleaning and will leave floors
damp.
6
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
6
11-07-04 11:07 AM
The Shark® Lift-Away™ Pro Steam Pocket® Mop has three unique steam
settings so you can use the perfect amount of steam for the cleaning
task at hand. See below for tips on when to use each setting.
Setting
DUST
Ideal for These Surfaces
Recommended Usage
Laminate
Bamboo
Hardwood
Marble
Light cleaning and dusting
Loosen and lift light dirt
Sanitize floors
Basic, everyday cleaning
Hardwood
Marble
Tile
Remove spots and smaller messes
MOP
Clean moderate and heavily-
trafficked areas
Stone
Sanitize floors
Hardwood*
Tile
Tough cleaning and removal of
stuck-on messes and stains
Deep clean heavily-trafficked areas
Cut through heavy dirt and grime
Sanitize floors
Stone
SCRUB
Linoleum
Carpet
Freshen area rugs and carpets
(with Carpet Glider)
* Scrub mode not recommended for continuous cleaning on hardwood
7
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
7
11-07-04 11:07 AM
Using Your Steam Mop - cont’d
6
When the water tank is empty, the
Steam Mop will stop producing
steam. You can refill the water tank
at any time as long as the mop is
unplugged from the outlet. Follow
the instructions from page 4. This
applies to switching the mop heads
or micro-fiber cleaning pad as well.
fig. 12
NOTE: Please wait 2-3 minutes for
the Steam Mop to cool off before
switching the mop head or the
micro-fiber cleaning pad. Never
leave the Steam Mop with a damp/
wet micro-fiber cleaning pad on
any floor.
5
When one side of the micro-fiber
cleaning pad gets dirty, just flip the
mop and you can quickly start using
the other side. (fig. 12)
Using Your Carpet Glider
The Steam Mop will not clean your
carpeting or area rugs. However, it is
great for grooming and freshening.
fig. 13
fig. 14
THE CARPET GLIDER
2
Move the Steam Mop back and forth
across a section of the carpet.
(fig. 14)
1
The Carpet Glider can be used with
the All-Purpose Head to lightly steam
your carpet and area rugs. Just
place the mop head with micro-fiber
cleaning pad attached into the glider.
The recommended steam setting is
SCRUB when using the Carpet Glider.
(fig. 13)
8
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
8
11-07-04 11:07 AM
Getting Started With Your
Removable Handheld Steamer
Your Shark® Lift-Away™ Pro
Steam Pocket® Mop is designed to clean
surfaces that will withstand high heat
and moisture. Do not use on unsealed
wood surfaces (especially wooden
antique furniture), unglazed ceramic
tile, painted surfaces or surfaces that
have been treated with wax, oils,
varnishes, or shellac. The sheen may be
removed by the heat, steam, and friction
of the cleaning tools. Lacquer and
polyurethane coatings provide a hard
durable protective finish that withstands
moisture, but it is always recommended
to test an isolated area of the surface to
be cleaned before proceeding.
fig. 15
We also recommend you check the use
and care instructions from the surface
manufacturer.
When cleaning finished wood surfaces,
use broad, continuous cleaning strokes.
To prevent surface damage, avoid
focusing steam or allowing the cleaning
tools to sit in one spot for any amount
of time.
NOTE: While the Shark® Lift-Away™
Pro Steam Pocket® Mop will operate
in one of three steam settings in the
mop mode, your Handheld Steamer
is programmed to function on just
one steam setting. This setting
IMPORTANT: Before removing the
Handheld Steamer from the Steam
Mop Housing, make sure that the
unit is not actively steaming. The
ON/STANDBY button should be
flashing blue. If the ON/STANDBY
button is solid blue, then press the
button until it returns to flashing
blue.
is optimized for above-the-floor
cleaning and garment steaming.
1
To remove the Handheld Steamer,
press and hold down the Handheld
Release Buttons while pulling out the
Handheld Steamer. (fig. 15)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd
9
11-07-04 11:07 AM
Using Your Removable Handheld Steamer
with Direct Steam Nozzle
Cleaning Tip: The Direct Steam Nozzle creates direct steam spray to clean
and sanitize hard to reach nooks & crannies and other places where germs
may build up. Use the Direct Steam Nozzle to loosen and dislodge compact
dirt often found in corner and tight places where traditional methods and
cleaning tools tend to push dirt into, making it tough to reach and clean.
Spray direct steam and wipe clean with a wet cloth or paper towel.
fig. 17
fig. 16
FOR SPOT CLEANING AND
STEAMING
CAUTION: Do not press the steam
trigger until the Direct Steam Nozzle
is snapped into the main nozzle of
your Handheld Steamer.
2
3
First attach the Direct Steam Nozzle
by pressing the nozzle onto the
Handheld Steamer until it clicks into
place. (fig. 16)
4
To remove the Direct Steam Nozzle,
press and hold down the Handheld
Release Buttons. Then slide out the
Direct Steam Nozzle using the grip.
Then press and hold the steam
trigger button to start steaming.
While the steam trigger button is
pressed and held down, the ON/
STANDBY button will be solid blue.
When released, the ON/STANDBY
button will return to flashing blue.
(fig. 17).
CAUTION: Do not press the steam
trigger while removing the Direct
Steam Nozzle. Avoid touching the tip
of the Direct Steam Nozzle, as this
will be very hot after steaming.
NOTE: The Handheld Steamer may
continue to emit steam for a few
seconds after the trigger is released
This is normal, and the steaming will
eventually come to a stop.
For effective cleaning, hold the
steam output nozzle 1-2 inches away
from the surface you’re cleaning.
10
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 10
11-07-04 11:07 AM
Using Your Removable Handheld Steamer
with Garment Steamer
Cleaning Tip: The Garment Steamer is ideal for removing wrinkles from clothing
and freshening and grooming upholstery. A terry bonnet and frame with bristles
provides controlled steaming for most types of clothing. A specialized micro-fiber
bonnet is ideal for freshening couches and other upholstery, where odors may
accumulate.
fig. 18
fig. 20
fig. 19
3
Snap the frame with bristles over the
Garment Steamer. For ease of use,
we recommend that the bristles be
aligned with the top of the Garment
Steamer bonnet. (fig. 18)
4
5
Attach the assembled Garment
Steamer to the removable Handheld
Steamer by snapping it into the main
nozzle. (fig. 19)
CAUTION: Always determine color
fastness of any fabric, especially with
reds or blues. Take a clean, moist,
warm towel and gently rub a small
area on the fabric that is as out of
sight and out of the way as possible.
If color bleeds onto the towel,
you may need to have the piece
professionally cleaned.
Press and hold the steam trigger
button, and move slowly up and
down over your garments or
upholstery. While the steam trigger
button is pressed and held down,
the ON/STANDBY button will be
solid blue. When released, the ON/
STANDBY button will return to
flashing blue. (fig. 20)
1
Select either the thinner, terry cloth
bonnet to steam your garments,
or the thicker, shaggier bonnet to
freshen upholstery.
CAUTION: Do not press the steam
trigger while attaching or removing
the Garment Steamer.
2
Use the lavender loop on the side of
the bonnet to slide over the nozzle
opening of the Garment Steamer.
The elastic around the bonnet should
hold it firmly in place around the
Garment Steamer opening.
6
To remove the Garment Steamer,
press and hold down the Handheld
Release Buttons. Then slide out the
Garment Steamer using the grip on
top of the Steamer.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 11
11-07-04 11:07 AM
Using Your Removable Handheld Steamer
with Accessory Hose
fig. 21
fig. 22
1
To use the Accessory Hose, first
attach the Accessory Hose to the
Handheld Steamer by snapping the
Accessory Hose into the main nozzle.
(fig. 21)
CAUTION: Do not press the steam
trigger while attaching or removing
the Accessory Hose.
CAUTION: Do not use the
Accessory Hose without cleaning
tools attached.
2
3
Select the desired cleaning tool
for use. Follow the cleaning tool
sub-assembly instructions for the
selected tool.
NOTE: Additional attachments
are available. Please visit
more information.
To remove the Accessory Hose,
press and hold down the Handheld
Release Buttons. Then slide out the
Accessory Hose using the grip.
(fig. 22)
12
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 12
11-07-04 11:07 AM
Using Your Removable Handheld Steamer
with Flat Scrubber Tool
Cleaning Tip: The Flat Scrubber Tool is designed for cleaning a variety of surfaces
and is exceptional on those that are large and flat including counter tops, table tops,
walls mirrors, windows, stairs, shelves and other similar surfaces. Super absorbent
micro-fiber bonnet loosens, lifts, and locks in dirt and grime while sanitizing at the
same time.
fig. 25
fig. 24
fig. 23
1
To attach the All-Purpose Scrubber
Pad, place the pad exterior side
down on a flat surface (lavender tab
indicates the bottom of the pad) and
insert the top of the Flat Scrubber
Tool into the top portion of the pad
and then pull the pad over each side
of the back edge.
4
To remove the Flat Scrubber Tool,
press and hold down the Accessory
Hose release button. Then slide out
the Flat Scrubber Tool. (fig. 25)
CAUTION: Do not press the steam
trigger while attaching or removing
the Flat Scrubber Tool.
2
3
Press the Flat Scrubber Tool onto
the Accessory Hose until it clicks into
place. (fig. 23)
CAUTION: Do not use the Flat
Scrubber Tool without the
All-Purpose Scrubber Pad attached.
Press and hold the steam trigger
to create steam. While the steam
trigger button is pressed and held
down, the ON/STANDBY button will
be solid blue. When released, the
ON/STANDBY button will return to
flashing blue. (fig. 24)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 13
11-07-04 11:07 AM
Care of Your Steam Mop
fig. 27
fig. 26
fig. 28
fig. 29
AFTER USE AND STORAGE
1
When you have finished using the
Handheld Steamer, reattach it to the
mop by first placing the bottom of
the Handheld Steamer into the cradle
of the mop housing. (fig. 26)
Remove the micro-fiber cleaning pad
by releasing the quick fasteners and
using the lavender loop on the side
of the pocket, avoiding contact with
the hot pad or dirt. (fig. 27)
2
Then slide the top end of the
Handheld Steamer into the mop
housing and snap into place.
4
5
Empty the water tank before
storage. Remove the water tank cap
and empty the tank over a sink.
Replace the water cap. (fig. 2 8)
NOTE: Make sure all attachments
are removed before reuniting the
Handheld Steamer with the Steam
Mop.
To store the Shark® Lift-Away™ Pro
Steam Pocket® Mop hanging up, first
remove the head (after it has cooled
and the steam has been released)
then hang on a large hook. (fig. 29)
3
If you are also done mopping, press
the ON/STANDBY button until the
LED light turns flashing blue. This
stops the unit from steaming. Unplug
the cord from the outlet and place
the mop into the upright position. Let
the unit cool for 2-3 minutes.
14
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 14
11-07-04 11:07 AM
Cleaning Tip: To prevent clogging,
it is recommended that you
periodically clean the Direct
Steam Nozzle and the extension
hose stem with the cleaning tool
provided or a paper clip.
fig. 30
fig. 31
fig. 32
CARE OF YOUR MICRO-FIBER
CLEANING PAD
CLEANING THE NOZZLE
1
Your Handheld Steamer should not
normally require cleaning, however,
should you notice a decrease in the
steam output, it may be necessary
to remove mineral deposits built up
around the nozzles.
1
We recommend washing your
micro-fiber cleaning pad separately
from other fabrics to avoid picking
up lint. Only use liquid detergent
(no powder detergent). Do not use
any fabric softeners or bleach. Line
dry or dry on a low dryer setting.
(fig. 30)
2
3
Unplug the cleaner from the
electrical outlet.
Use the provided nozzle cleaner or a
small diameter stiff metal wire, such
as a straightened metal paperclip,
and carefully insert the end of the
wire into the nozzle orifice. See
illustration above. (fig. 32)
2
If there are loose threads on the
micro-fiber cleaning pad carefully
cut the thread with scissors. Do not
pull on them or cut at the base.
(fig. 31)
IMPORTANT: The micro-fiber
cleaning pad may be very hot
from the steam. Use caution when
removing. Let the unit cool for 2-3
minutes.
4 Move the wire back and forth several
times to remove any deposits.
5
Plug in the appliance to the power
outlet and test steam output.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 15
11-07-04 11:07 AM
Troubleshooting Guide
PROBLEM
POSSIBLE REASONS & SOLUTIONS
Your steam mop should be securely plugged into a 120V AC
electrical outlet only.
The Shark® Lift-Away™
Pro Steam Pocket®
Mop will not turn-on.
Check your fuse or breaker.
If your unit still does not work, call Customer Care at
1-800-798-7398.
Is there water in the water tank? If not, add water to your steam
mop following instructions on page 4.
The unit will not
make steam.
If the unit still does not make steam, follow the instructions on
page 15 to clean the nozzle.
If you have already plugged in your unit, unplug and try a different
outlet. This may reset the standby mode.
Cannot select steam
setting/flashing blue
light remains on.
Add water to the tank and select steam setting by pressing the
standby button.
If your unit still does not work, call Customer Care at
1-800-798-7398.
The Shark® Lift-Away™
Pro Steam Pocket®
Mop leaves water on
the floor.
Check to see if your micro-fiber cleaning pad is too wet. We
recommend you unplug the steam mop and change the micro-fiber
cleaning pad.
Make sure the micro-fiber cleaning pad is attached correctly.
The Shark® Lift-Away™
Pro Steam Pocket®
Mop left a white spot
on the floor.
Do not leave your steam mop on the floor with a damp or wet
cleaning pad.
If you’re using tap water, we recommend switching to distilled
water.
Make sure the cap is securely on the water tank.
The micro-fiber cleaning pad might be dirty. Flip or change the
cleaning pad.
If you washed the cleaning pad with powder detergent, then your
pad could be damaged and require replacement. Replacement pads
are available at sharkclean.com.
Floors are cloudy,
streaky or spotty
after steaming.
This could also be an indication of prior soap or grease residue
that has accumulated on the floor. As our steam mops use only
a small amount of water, it may not be wet enough to rinse off
the accumulation that the steam is bringing to the surface. We
suggest rinsing the floor with nothing but water, letting it dry, and
then steam mopping again with a clean pad. One or more rinses
generally removes the residue.
A more stubborn case may require you to rinse the floor with a mix
of one part vinegar and two parts water.
The Shark® Lift-Away™
Pro Steam Pocket®
Mop is hard to push.
Make sure the micro-fiber cleaning pad is attached correctly.
Check to see if the cleaning pad is excessively dirty. If so, replace
the cleaning pad.
The small steam bonnet frame must be in place at all times during
usage. The bonnet prevents water drops from being left on the
garment and removes impurities from your water.
The nozzle leaves
water drops on the
garment.
If the steam bonnet is too wet or the frame has condensation, let
the unit cool for 30 minutes, remove the steam bonnet and let it dry
out before using again, or replace with a new steam bonnet.
16
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 16
11-07-04 11:07 AM
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material
and workmanship for a period of one (1) year from the date of the original purchase,
when utilized for normal household use, subject to the following conditions,
exclusions and exceptions.
If your appliance fails to operate properly while in use under normal household
conditions within the warranty period, return the complete appliance and accessories,
freight prepaid. For Customer Service support, call 1 (800) 798-7398 or visit our
If the appliance is found to be defective in material or workmanship, EURO-PRO
Operating LLC will repair or replace it free of charge. Proof of purchase date and $
14.95 to cover the cost of return shipping and handling must be included. *
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair
or replacement of the unit at our option. This warranty does not cover normal wear
of parts and does not apply to any unit that has been tampered with or used for
commercial purposes. This limited warranty does not cover damage caused by
misuse, abuse, negligent handling or damage due to faulty packaging or mishandling
in transit. This warranty does not cover damage or defects caused by or resulting
from damages from shipping or repairs, service or alterations to the product or any of
its parts, which have been performed by a repair person not authorized by EURO-
PRO Operating LLC.
This warranty is extended to the original purchaser of the unit and excludes all other
legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC
warranty if any, is limited to the specific obligations expressly assumed by it under
the terms of the limited warranty. In no event is EURO-PRO Operating LLC liable
for incidental or consequential damages of any nature whatsoever. Some states/
provinces do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state or province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include
proof of purchase date and to attach tag to item before packing with your name,
complete address and phone number with a note giving purchase information,
model number and what you believe is the problem with the item. We recommend
you insure the package (as damage in shipping is not covered by your warranty).
Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are
constantly striving to improve our products, therefore the specifications contained
herein are subject to change without notice.
Product Registration
product within ten (10) days of purchase. You will be asked to provide the store name,
date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product
safety notification. By registering you acknowledge to have read and understood the
instructions for use, and warnings set forth in the accompanying instructions.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 17
11-07-04 11:07 AM
Notes
18
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 18
11-07-04 11:07 AM
Notes
19
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 19
11-07-04 11:07 AM
EURO-PRO Operating LLC
U.S.: Newton, MA 02459
Canada: Ville St. Laurent, Québec H4S 1A7
1-800-798-7398
COPYRIGHT © 2011 EURO-PRO OPERATING LLC
PRINTED IN CHINA
S3901D.E.110704.2
Illustrations may differ from actual product.
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901D_11_IB_E_110704_2.indd 20
11-07-04 11:07 AM
|