Server Technology Switch CDU CW 24VD User Manual

Sentry : Solutions for the Data Center Equipment Cabinet  
Sentry Switched CDU  
CW-24VD/Y  
Key Features  
High-Density Power Distribution  
> Remote Power Management:  
Power cycle individual power  
outlets, or groups of power  
outlets, to remotely reboot  
servers and network devices,  
anywhere in the world. Or,  
power-off unused power  
receptacles  
> High Power Distribution:  
3-Phase power; 20 or 30-Amp  
power input feed options  
> High Density: Single power  
input feed; 24 outlets per  
enclosure  
The Switched CDU’s combine remote configuration and management  
with power distribution and power and environmental monitoring.  
Reboot a single or dual-power server with one command. Receive  
SNMP-based alerts and email alerts when power or environmental  
conditions exceed thresholds. Assign users specific access rights to  
designated outlets or groups.  
Only the Switched CDU products provide the flexibility needed for all  
data centers and remote sites, including power requirements for  
high-amp, high voltage; UL 60950-1 branch circuit protection; SSL &  
SSH security; and SNMP-based input current monitoring.  
> IP Access & Security: Web  
interface, SSL, SSH,Telnet, SNMP,  
FTP, SNTP, Syslog, LDAP, LDAPS,  
TACACS and RS-232 access  
> Add an Expansion Module:  
Daisy chain the Switched CDU  
Expansion Module (CW/CX) for  
power management of separate  
power circuits from a single IP  
address  
The Switched CDU also supports Enterprise View PDU Manager.  
This gives the engineer the ability to manage a large installation of  
Networked CDUs from one location, view and access multiple Smart  
and Switched CDUs from a single web interface.  
Additional Benefits:  
> Environmental Monitoring:  
Each Switched CDU supports two  
temperature & humidity probes  
and reports conditions thru the  
Web interface  
> Enterprise View: View and  
access multiple Switched CDUs  
from one Web interface**  
Branch Circuit Protection  
The Sentry CDU Family meets the new UL 60950-1  
requirement for branch circuit protection.  
Attention! The Sentry CDU products meet the above criteria by  
providing overcurrent protection with UL-listed Bussman SC fuses for  
each branch circuit.  
> SNMP Traps: Provide automated  
alerts for power and  
Input Current Monitoring  
environmental conditions  
The CDU’s exclusive True RMS current monitoring is critical  
to preventing overloads in high-density computing  
environments. LED digital displays on the CDU enclosure  
report the input current of each phase or branch circuit.  
> Input Current Monitor:  
Precisely measure the aggregate  
current draw (in amps) on each  
power circuit. On-site verification  
of the input current with the LED  
digital display. Remote  
verification via browser or serial  
screen.  
> Power-up Sequencing: Prevent  
an in-rush power overload  
Temperature and Humidity  
The Switched CDU supports two external probes. Each of  
these probes measure both temperature and humidity.  
Receive SNMP-based alert notifications when conditions  
exceed defined thresholds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Radio 820 S RF User Manual
Sennheiser Radio EK 3041 U User Manual
Sharp Computer Monitor LC M3710 User Manual
Sierra Wireless Saw 2400154 User Manual
Soleus Air Air Conditioner PE3 12R 03 User Manual
Sony Portable Speaker SA VE702 User Manual
Sunbeam Electric Heater SLP3300 CN User Manual
Superior Indoor Fireplace SLDVT 30NE User Manual
Swann Security Camera SW231 WMX User Manual
Tanaka Brush Cutter TBC 500 User Manual