W
300 IEM
Instructions for use
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
The ew 300 IEM G2 system .................................................................................. 42
The channel bank system ............................................................................................. 42
System components .............................................................................................. 43
Overview of operating controls ........................................................................... 44
SR 300 IEM G2 stereo transmitter ............................................................................... 44
EK 300 IEM G2 stereo receiver ..................................................................................... 45
Indications and displays on the transmitter ............................................................. 46
Indications and displays on the receiver ................................................................... 46
Preparing the components for use ..................................................................... 48
SR 300 IEM G2 stereo transmitter ............................................................................... 48
EK 300 IEM G2 stereo receiver ..................................................................................... 51
Using the components .......................................................................................... 52
Switching the components on/off .............................................................................. 52
Adjusting the volume .................................................................................................... 52
Adjusting the balance .................................................................................................... 53
Activating/deactivating the lock mode ..................................................................... 53
Attaching the receiver to clothing .............................................................................. 53
The buttons ..................................................................................................................... 54
Overview of menus ......................................................................................................... 55
Working with the operating menu ............................................................................. 55
Operating menu of the stereo transmitter ................................................................ 57
Operating menu of the stereo receiver ...................................................................... 59
Adjustment tips for the operating menu .......................................................... 62
Switching between channel banks ............................................................................. 62
Selecting the frequencies to be stored
in the channel bank “U” ....................................................................................................... 62
Scanning the channel banks for free channels
(receiver only) ........................................................................................................................ 62
Multi-channel operation ................................................................................................ 63
Adjusting the squelch threshold (receiver only) ...................................................... 63
Stereo/FOCUS selection (receiver only) ..................................................................... 64
Adjusting the sensitivity (transmitter only) ............................................................ 64
Selecting the standard display .................................................................................... 65
Entering a name .............................................................................................................. 65
Loading the factory-preset default settings ............................................................. 66
Stereo/Mono selection (transmitter only) ................................................................ 66
Activating/deactivating the lock mode ..................................................................... 67
Exiting the operating menu .......................................................................................... 67
Error checklist .................................................................................................................. 68
Recommendations and tips .......................................................................................... 69
HDX noise reduction ....................................................................................................... 70
Wireless transmission systems ................................................................................... 70
Connector assignment ................................................................................................... 73
41
Download from Www.Somanuals.com. All Manuals Search And Download.
The ew 300 IEM G2 system
With the Sennheiser evolution wireless in-ear monitoring system ew 300 IEM G2
(suitable for both stage and broadcast use), musicians, video and sound
amateurs, reporters/broadcasters, etc. can directly monitor the received sound
signals without troublesome cables or monitor speakers being required. In
addition, the system can also be used for any application where talkback signals
are to be transmitted.
The evolution wireless in-ear monitoring system ew 300 IEM G2 is a high-
quality state-of-the-art RF transmission systems with a high level of
operational reliability and ease of use. Transmitter and receiver permit
wireless transmission with studio-quality sound. The excellent transmission
reliability of the ew 300 IEM G2 system is based on the use of
y further optimized PLL synthesizer and microprocessor technology,
y the HDX noise reduction system,
y the pilot tone squelch control (during stereo operation),
y and the scan function for scanning the channel banks for free channels.
The channel bank system
The ew 300 IEM G2 system is available in five UHF frequency ranges with
1440 transmission/receiving frequencies per frequency range. Please note:
Frequency usage is different for each country. Your Sennheiser agent will
have all the necessary details on the available legal frequencies for your area.
Range A:
Range B:
Range C:
Range D:
Range E:
518 to 554 MHz
626 to 662 MHz
740 to 776 MHz
786 to 822 MHz
830 to 866 MHz
Transmitter and receiver have nine channel banks with up to 12 switchable
channels each.
channel 1
channel 2
preset frequency
preset frequency
channel bank 1...8
preset frequency
channel 12
channel 1
channel 2
freely selectable frequency
freely selectable frequency
channel bank U
freely selectable frequency
channel 12
The channel banks “1” to “8” have switchable channels that are factory-
preset to a transmission/receiving frequency (see enclosed frequency table).
These transmission/receiving frequencies cannot be changed but have been
preset so that e.g. country-specific regulations on frequency usage are taken
42
Download from Www.Somanuals.com. All Manuals Search And Download.
into account. The channel bank “U” (user bank) has up to 12 switchable
channels to store your selection out of 1440 transmission/receiving
frequencies that are freely selectable within the preset frequency range.
An advantage of the factory-preset frequencies is that
y the system is ready for immediate use after switch-on,
y several in-ear monitoring systems can be operated simultaneously on the
preset channels without causing intermodulation interference.
Safety instructions
Never open electronic units! If units are opened by customers in breach of this
instruction, the warranty becomes null and void.
Keep the units away from central heating radiators and electric heaters.
Never expose them to direct sunlight.
Use the units in dry rooms only.
Use a damp cloth for cleaning the units. Do not use any cleansing agents or
solvents.
Attention! High Volume!
This is a professional transmission system. Commercial use is subject to the
rules and regulations of the trade association responsible. Sennheiser, as the
manufacturer, is therefore obliged to expressly point out possible health risks
arising from use.
This system is capable of producing sound pressure exceeding 85 dB(A).
85 dB(A) is the sound pressure corresponding to the maximum permissible
volume which is by law (in some countries) allowed to affect your hearing for
the duration of a working day. It is used as a basis according to the
specifications of industrial medicine. Higher volumes or longer durations can
damage your hearing. At higher volumes, the duration must be shortened in
order to prevent damage. The following are sure signs that you have been
subjected to excessive noise for too long a time:
y You can hear ringing or whistling sounds in your ears.
y You have the impression (even for a short time only) that you can no longer
hear high notes.
System components
The system consists of:
y 1 EK 300 IEM G2 stereo receiver
y 1 SR 300 IEM G2 stereo transmitter
y 2 batteries
y 1 telescopic antenna for SR 300 IEM G2
y 1 NT 2-1 mains unit
y IE 3 in-ear headphones
y Instructions for use
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of operating controls
SR 300 IEM G2 stereo transmitter
³
·
»
¿
´ ²
ቧ
ቨ
ቩ
¶
º
¾
µ
¸
¹
Ƹ
Operating controls
Graphic display panel
³ Headphone output (PHONES),
ቢ Display for the current channel bank “1...8, U”
¼” (6.3 mm) jack socket
ባ Display for the current channel number “1...12”
· Headphone volume control (VOL)
» Graphic display, backlit
¿ ̄/̆ rocker button, backlit
´ SET button, backlit
ቤ “B.CH“ – abbreviation for channel bank and
channel number
ብ Alphanumeric display
ቦ “MHz“ – appears when the frequency is displayed
² ON button, backlit
ቧ Level display for audio signal “AF I” (left and MONO),
(serves as the ESC (cancel) key in the
operating menu)
with “PEAK” warning
ቨ Level display for audio signal “AF II” (right),
¶ Cable grip for power supply DC cable
with “PEAK” warning
º DC socket for connection of mains unit (DC IN)
ቩ Lock mode icon
(lock mode is activated)
¾ Audio input (AF IN BAL/UNBAL),
XLR-3F socket (left and MONO)
Note:
µ Audio input (AF IN BAL/UNBAL),
For further illustrations and examples of the different
standard displays, please refer to the section
XLR-3F socket (right)
¸ Service interface (DATA)
¹ Type plate
Ƹ Antenna output (ANT), BNC socket
44
Download from Www.Somanuals.com. All Manuals Search And Download.
EK 300 IEM G2 stereo receiver
·
»
ቢ
ባ
ቤ
³
Ƹ
¹
¸
¿
´
ቩ ቪ
ብ
ቦ
ቧ
ቨ
²
¶
º
¾
µ
Operating controls
LC display panel
ቢ Alphanumeric display
³ Headphone output (PHONES), 3.5 mm jack socket
· Antenna
ባ “B.CH“ – appears when the channel bank and
the channel number are displayed
» Red LED for operation and
battery status indication (ON/LOW BAT)
ቤ “MHz“ – appears when the frequency is displayed
¿ Green LED for RF signal indication (RF)
´ SET button
ብ 4-step battery status display
ቦ Lock mode icon
(lock mode is activated)
² ̄/̆ rocker button (DOWN/UP)
¶ Battery compartment
º Battery compartment cover
¾ Unlocking button
ቧ “PILOT” display
(pilot tone evaluation is activated)
ቨ “MUTE” display
(audio output is muted)
µ ESC button
ቩ 7-step level display for received audio signal “AF”
¸ LC display
ቪ 7-step level display for received RF signal “RF”
¹ On/off/volume control
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Indications and displays on the transmitter
Modulation display
The level display for audio signal “AF” shows the modulation of the
transmitter.
When the transmitter’s audio input level is excessively high, the level display
for audio signal “AF” shows full deflection.
When the transmitter is overmodulated frequently or for an extended period
of time, the text “PEAK” (backlit in red) flashes in alternation with the
standard display.
Button backlighting
During standby operation, the ON button ᕦ is backlit in red. When the
transmitter is switched on, the SET button ᕥ and the ̆/̄ button ᕤ are
additionally backlit in green.
ᕤ ᕥ
ᕦ
Indications and displays on the receiver
Operation and battery status indication
The red LED (LOW BAT/ON) ꢀ provides information on the current operating
state of the receiver:
Red LED lit up:
The receiver is switched on and the capacity of the
batteries/accupack BA 2015 is sufficient.
Red LED flashing: The batteries are/the accupack BA 2015 is going flat
(LOW BAT)!
»
In addition, the 4-step battery status display ብ on the display panel provides
information on the remaining battery/accupack BA 2015 capacity:
3 segments:
2 segments:
1 segment:
capacity approx. 100 %
capacity approx. 70 %
capacity approx. 30 %
Battery icon flashing: LOW BAT
ብ
Modulation display of the receiving transmitter
The level display for audio signal “AF” shows the modulation of the
transmitter.
When the transmitter’s audio input level is excessively high (AF peak), the
receiver’s level display for audio signal “AF” shows full deflection.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
“MUTE” display
The “MUTE” display ቨ appears on the display panel when the RF signal of the
received transmitter is too weak.
ቨ
“PILOT” display
The “PILOT” display ቧ appears on the display panel when the pilot tone
evaluation is activated (see “Activating/deactivating the pilot tone
ቧ
RF signal indication
The green LED (RF) ᕤ at the front of the receiver lights up when an RF signal
is being received.
However, the green LED (RF) does not light up when the audio output is
muted because
y the RF signal of the received transmitter is too weak,
¿
y the transmitter is set to mono operation and the receiver’s pilot tone
evaluation is activated.
Display backlighting
After pressing a button, the display remains backlit for approx. 15 seconds.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the components for use
SR 300 IEM G2 stereo transmitter
Mounting the transmitter feet
To ensure that the transmitter cannot slip on the surface on which it is placed,
four self-adhesive soft rubber feet are supplied.
̈ Ensure that the base of the transmitter is clean and free from grease
before mounting the rubber feet.
̈ Fix the rubber feet to the base of the transmitter by peeling of the safety
paper and fitting them as shown in the digram on the left.
Attention!
Some furniture surfaces have been treated with varnish, polish or
synthetics which might cause stains when they come into contact with
other synthetics. Despite a thorough testing of the synthetics used by us,
we cannot rule out the possibility of staining.
Connecting the antenna
The supplied telescopic antenna can be mounted quickly and easily to the
rear of the transmitter and is suitable for all applications where – good
transmission conditions provided – a wireless transmission system is to be
used without a large amount of installation work.
ꢁ
̈ Connect the telescopic antenna ꢁ to the BNC socket Ƹ at the rear of the
transmitter.
̈ Pull the end cap to extend the telescopic antenna ꢁ.
Use a remote antenna (available as an accessory) when the transmitter
position is not the best antenna position for optimum transmission.
Ƹ
Connecting the mains unit
The transmitter is powered via a mains unit.
̈ Pass the cable through the cable grip ᕧ.
̈ Insert the DC connector on the mains cable into the DC socket ᕨ.
¶
º
Connecting the amplifier/mixing console
̈ Connect the amplifier/mixing console to the XLR-3F sockets ᕩ (left and
MONO) or µ (right).
Both balanced and unbalanced connection is possible (see “Connector
Note:
¾
µ
Any unit that is only suitable for mono operation must be connected to
XLR-3F socket ᕩ. In this case, set the transmitter to mono operation via
the menu.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the headphones/monitoring the audio signal
To monitor the audio signal, connect headphones with a ¼” (6.3 mm)
jack plug to the headphone output (PHONES) ᕡ.
Attention! High volume!
Even short exposure to high volume levels will damage your hearing!
Set the volume for the connected headphones to the minimum before
putting the headphones on.
̈ First, set the volume control ᕢ to the lowest volume by turning it to the
³
·
left as far as possible. Then gradually turn up the volume.
Volume up? – NO!
When people use headphones, they tend to choose a higher volume than
with loudspeakers. Listening at high volume levels for long periods can
lead to permanent hearing defects. Please protect your hearing,
Sennheiser headphones have an excellent sound quality even at low
volumes.
Service interface
The service interface ¸ is only required for servicing purposes.
¸
19” rack adapter and antenna mount
For mounting one or two transmitters into a 19” rack, you require the GA 2
rack adapter (available as an accessory). The GA 2 rack adapter consists of:
ƻ
ꢂ
Ƽ
y 2 rack mount “ears” ꢂ
y 1 connecting bar ƻ
y 1 connecting plate Ƽ
y 2 covering plugs ꢃ for antenna holes
y 12 recessed head screws M 3x6
y 2 recessed head screws M 6x10
ꢃ
When mounting only one transmitter into a rack, you can use the AM 2
antenna mount (available as an accessory) to mount the transmitter’s
antenna connection to the front of the GA 2 rack adapter. The AM 2 antenna
mount consists of:
y 2 BNC extension cables (screw-in BNC socket ƾ to BNC connector ƿ)
ƾ
y 2 plains washers
y 2 nuts
ƿ
49
Download from Www.Somanuals.com. All Manuals Search And Download.
To mount two transmitters into a rack:
̈ Place the two transmitters side by side onto a flat
surface, their bottom sides facing upwards.
̈ Align the connecting plate Ƽ over the holes in the
bottom sides of the transmitters.
ꢂ
̈ Secure the connecting plate Ƽ using eight of the
supplied recessed head screws (M 3x6).
̈ Hook the two rack mount “ears” ꢂ to the front panels
of the transmitters.
̈ Secure the rack mount “ears” to the transmitters
using two of the supplied recessed head screws
(M 3x6) respectively.
Ƽ
ꢂ
̈ Slide the transmitters into the 19” rack.
̈ Secure the rack mount “ears” to the rack.
When mounting only one transmitter into a rack, use the
ƻ
connecting bar ƻ instead of the second transmitter.
̈ Hook the two rack mount “ears” ꢂ to the front panels
of the transmitter.
̈ Secure the rack mount “ears” to the transmitter using
two of the supplied recessed head screws (M 3x6)
respectively.
ꢃ
ꢂ
̈ Secure the connecting bar ƻ to one of the rack mount
“ears” ꢂ using two of the supplied recessed head
screws (M 6x10).
ꢂ
̈ If you are not front mounting the antennas, insert the
two covering plugs ꢃ into the antenna holes of the
connecting bar.
̈ Slide the transmitter into the 19” rack.
̈ Secure the rack mount “ears” to the rack.
To mount the transmitter’s antenna connection to the
front of the GA 2 rack adapter using the AM 2 antenna
mount:
ƻ
ƿ
ƾ
̈ Screw the BNC socket ƾ of the BNC extension cables
to the connecting bar ƻ using the supplied plain
washer and nut.
ꢁ
̈ Connect the BNC connector ƿ to the BNC socket Ƹ at
the rear of the transmitter.
̈ Slide the transmitter into the 19” rack.
̈ Secure the rack mount “ears” to the rack.
̈ Connect the telescopic antenna ꢁ to the BNC
socket ƾ.
̈ Pull the end cap to extend the telescopic antenna.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
EK 300 IEM G2 stereo receiver
Inserting and replacing the batteries
For powering the EK 300 IEM G2 receiver, two 1.5 V AA size batteries are
required.
¾
µ
̈ Press the two unlocking buttons µ and open the battery compartment
cover ᕩ.
̈ Insert the two batteries as shown in the diagram on the left. Please
observe correct polarity when inserting the batteries.
̈ Close the battery compartment. The battery compartment cover ᕩ locks
into place with an audible click.
Inserting and charging the accupack
The receiver can also be powered via the rechargeable Sennheiser BA 2015
accupack. Insert the accupack into the battery compartment as described above.
The transmitter has two charging contacts ´ and a sensing contact on its short
sides. The accupack can be recharged while remaining in the transmitter. Insert
the transmitter into the L 2015 charger (see operating manual of the L 2015
charger).
¾
´
Note:
For accupack operation of the receiver, only use the BA 2015 accupack In
order to ensure optimum operational reliability. For charging the accupack,
only use the L 2015 charger. Both the accupack and the charger are
available as accessories. The accupack is fitted with an integrated sensor
which is – via a third contact – monitored by the electronics of the receiver
and the charger. The sensor is necessary for the following control purposes:
y The taking into account of the different voltage characteristics of pri-
mary cells (batteries) and accupacks. The battery status indications on
the displays, the transmission of transmitter battery status information
to the rack-mount receivers and the switch-off thresholds at the end of
the operating time are corrected correspondingly. Due to the missing
sensor, individual rechargeable battery cells will not be identified as
accupacks.
y The monitoring of the accupack temperature during charging in the
L 2015 charger.
y The prevention of improper charging of inserted primary cells (batte-
ries). Due to the missing sensor, individual rechargeable battery cells
will also not be charged in the L 2015 charger.
Connecting the headphones
̈ If you use the receiver as part of the monitoring system, connect the
supplied in-ear headphones or any Sennheiser stereo headphones with
3.5 mm stereo jack plug to the headphone output (PHONES) ᕡ.
Attention! High volume!
Even short exposure to high volume levels will damage your hearing!
Set the volume for the connected headphones to the minimum before
putting the headphones on.
³
·
̈ First, set the volume control ᕢ to the lowest volume by turning it to the
left as far as possible. Then gradually turn up the volume.
Volume up? – NO!
When people use headphones, they tend to choose a higher volume than
with loudspeakers. Listening at high volume levels for long periods can lead
to permanent hearing defects. Please protect your hearing, Sennheiser
headphones have an excellent sound quality even at low volumes.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the components
Switching the components on/off
Switching the transmitter on/off
̈ Press the ON button ᕦ to switch the transmitter on.
̈ To switch the transmitter off, press the ON button until “OFF” appears on
the display.
Note:
The transmitter can only be switched off when the standard display is
shown on the display panel. Within the operating menu, the ON button
serves as the ESC (cancel) key, i.e you cancel your entry and return to the
standard display.
ᕦ
Switching the receiver on/off
̈ To switch the receiver on, turn the volume control Ƹ clockwise until it
Ƹ
clicks. The red LED ꢀ lights up.
̈ To switch the receiver off, turn the volume control Ƹ counterclockwise
until it clicks. The red LED ꢀ goes off.
Note:
»
y The receiver has a short switch-on delay.
y Remove the batteries or the accupack when the receiver will not be used
for extended periods of time.
Adjusting the volume
You can adjust the volume at the headphone output on both the transmitter
and the receiver.
̈ Use the volume control ᕢ or Ƹ to adjust the volume of the connected
headphones.
Volume up? – NO!
When people use headphones, they tend to choose a higher volume than
with loudspeakers. Listening at high volume levels for long periods can
lead to permanent hearing defects. Please protect your hearing,
Sennheiser headphones have an excellent sound quality even at low
volumes.
³
·
Ƹ
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the balance
During stereo operation – and provided that the standard display is shown
on the display panel – the ̄/̆ rocker button ᕧ serves to adjust the balance
between the left and right stereo signal.
During FOCUS operation, the ̄/̆ rocker button ᕧ serves to adjust the
relative levels of the two separate channels in the mixed mono signal (see
ᕧ
Activating/deactivating the lock mode
Transmitter and receiver have a lock mode that can be activated or
deactivated via the operating menu (see “Activating/deactivating the lock
mode” on page 67). The lock mode prevents that
y the transmitter is accidentally programmed or switched off during
operation
SR 300 IEM G2
EK 300 IEM G2
y the balance setting is accidentally changed via the receiver’s ̄/̆ rocker
button.
Attaching the receiver to clothing
The receiver is attached to clothing (e.g. belt, waistband) with the supplied
belt clip.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
The operating menu
To ensure intuitive operation of both transmitter and receiver, the operating
menus have been largely standardized. As a result, adjustments to the
settings can be made quickly and “without looking” – even in stressful
situations, for example on stage or during a live show or presentation.
The buttons
Buttons
Mode
To ...
ON
(transmitter only)
Standard display switch the transmitter on and
off
Operating menu
cancel the entry and return to
the standard display
Setting mode
cancel the entry and return to
the standard display
SET
Standard display get into the operating menu
Operating menu
get into the setting mode of the
selected menu
Setting mode
store the settings and return to
the top menu level
̆/̄
Standard display without function (transmitter)
adjust the balance (receiver)
Operating menu
change to the previous menu
(̆) or change to the next menu
(̄)
Setting mode
adjust the setting of the
selected menu:
option (̆/̄)
ESC
Standard display without function
(receiver only)
Operating menu
cancel the entry and return to
the standard display
Setting mode
cancel the entry and return to
the standard display
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of menus
Transmitter
Receiver
Display
Bank
Function of the menu
Display
BANK
Function of the menu
Switching between channel banks
Switching between channel banks
Channel
Switching between the channels in
a channel bank
CHAN
Switching between the channels in
a channel bank
Tune
Setting a receiving frequency for the
channel bank “U” (user bank)
TUNE
SCAN
Setting a receiving frequency for the
channel bank “U” (user bank)
⎯
⎯
Scanning a channel bank for free
channels
⎯
⎯
⎯
⎯
⎯
⎯
SQELCH
ST-FOC
LTD
Adjusting the squelch threshold
Stereo/FOCUS selection
Limiting the volume at the
headphone output
⎯
⎯
Hi-BST
Activating/deactivating
the frequency boost
Sensitiv
Display
Name
Adjusting the sensitivity
Selecting the standard display
Entering a name
⎯
⎯
DISPLY
NAME
RESET
Selecting the standard display
Entering a name
Reset
Loading the factory-preset
default settings
Loading the factory-preset
default settings
⎯
⎯
PILOT
Activating/deactivating
the pilot tone evaluation
LCD Contr
Adjusting the contrast of the
graphic display
⎯
⎯
Mode
Lock
Exit
Stereo/Mono selection
⎯
⎯
Activating/deactivating the lock mode
LOCK
EXIT
Activating/deactivating the lock mode
Exiting the operating menu and
returning to the standard display
Exiting the operating menu and
returning to the standard display
Working with the operating menu
By way of example of the “Tune” menu, this section describes how to use the
operating menu.
After switching the unit on, the standard display is shown on the display
panel.
SR 300 IEM G2
EK 300 IEM G2
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting into the operating menu
̈ Press the SET button to get from the standard display into the operating
menu.
The last menu selected flashes on the display. With the transmitter, the
current setting is additionally displayed.
Selecting a menu
̈ Press the ̆/̄ buttons to select a menu.
̈ Press the SET button to get into the setting mode of the selected menu.
With the receiver, the current setting that can be adjusted flashes on the
display. With the transmitter, the name of the menu and the current
setting are displayed.
Adjusting a setting
̈ Press the ̆/̄ buttons to adjust the setting.
By briefly pressing the ̆/̄ buttons, the display jumps either forwards or
backwards to the next setting. In the “Channel”, “Tune” and “Name”
menu, the ̆/̄ buttons feature a “fast search” function. If you hold down
a button, the display cycles continuously. The “fast search” function
allows you to get fast and easily to your desired setting. With the receiver,
the new setting flashes on the display until it is stored.
Storing a setting
̈ Press the SET button to store the setting. “Stored” appears on the display,
indicating that the setting has been stored. The display then returns to
the top menu level.
With most menus, new settings become effective immediately without
having to be stored. An exception are the “Bank”, “Channel”, “Tune” and
“Reset” menus of the transmitter and the “RESET” menu of the receiver.
With these menus, new settings only become effective after they have
been stored (“Stored” appears on the display, indicating that the setting
has been stored).
Exiting the operating menu
̈ Select the “Exit” menu to exit the operating menu and to return to the
standard display.
When you have entered the operating menu, the transmitter’s ON button
serves as the ESC (cancel) key, i.e. by briefly pressing this button, you
cancel your entry and return to the standard display. The receiver has a
separate ESC button with which you can cancel your entry.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating menu of the stereo transmitter
SET
Exit
SET
Bank
1.01
Bank
3.01
Menu
Exit
786.300 MHz
790.250 MHz
B.CH
B.CH
Bank
1
Current channel bank
Channel 01
̆ /
̄:
1...8, U (User Bank)
Changing the channel bank
SET: Stores the setting
Stored
SET
Channel
Channel
Menu
3.01
3.08
Bank
3
790.250 MHz
807.900 MHz
B.CH
Current channel and
corresponding frequency
B.CH
Channel 01
Tune
Changing the channel
786.400MHz
̆ /
̄
:
Channel 01...12
SET: Stores the setting
Stored
SET
Tune
Tune
Menu
U.01
U.01
Channel 08
786.300 MHz
797.075 MHz
B.CH
B.CH
Tune
Sensitiv –24 dB
Setting the frequency for
channel bank "U"
807.900MHz
̆ /
̄
:
Transmission frequency
Current frequency on the
selected channel
in steps of 25 kHz
SET: Stores the setting
Stored
SET
Sensitiv
Sensitiv
Menu
– 24 dB
–8 dB
Tune
797.075MHz
Sensitiv –24 dB
Display Frequency
Setting the sensitivity
̆ /
̄:
0...–24 dB,
Current sensitivity setting
Sensitivity in steps of 8 dB
SET: Stores the setting
Stored
SET
Display
Display
Menu
Frequency
Name
Sensitiv –8 dB
Display Frequency
Name
Switching between the
standard displays
VOCAL
̆ /
̄:
Frequency,
Current standard display
Bank/Channel, Name
SET: Stores the setting
Stored
Frequency
Name
Bank/Channel
SET
Name
OCAL
Name
Menu
CAL
G
Display Name
Name
Reset
Assigning the transmitter a
name
VOCAL
Current transmitter name
̆ /
̄
:
Name (10 characters)
Letters w/o pronounciation
marks, numbers from 0...9,
special characters, spaces
SET: 9 x next character, then
store
Stored
Reset
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Name GUITAR
SET
Reset
Reset? No
Reset
Reset? Yes
Menu
Name
GUITAR
Reset
LCD Contr IIIIII.....
Loading the factory-preset
default settings
Security check
̆ /
̄
:
No, Yes
"reset"= Yes:
SET: Transmitter loads factory-
preset default settings,
transmitter is restarted,
standard display appears
"reset"= No:
SET: Reset is cancelled
SET
LCD Contrast
LCD Contrast
Menu
IIIIII..........
Reset
IIIIIIIIII......
LCD Contr IIIIII.....
Mode
Stereo
̆ /
̄:
16 steps
Current contrast setting
Adjusting the contrast of the
graphic display
SET: Stores the setting
STORED
SET
Mode
Mode
Menu
Stereo
Mono
LCD Contr IIIIIIIIII......
Mode
Lock
Stereo
Off
̆ /
̄:
Stereo, Mono
Current setting
Switching between stereo
and mono operation
SET: Stores the setting
STORED
SET
Lock
Lock
Menu
Off
On
Mode
Lock
Exit
Mono
Off
̆ /
̄
:
On, Off
Lock mode activated or
deactivated
Activating the lock mode
Lock mode = On:
SET: Stores the setting,
returns to standard display
Lock mode = Off:
SET: Stores the setting
STORED
SET
Menu
Lock
Exit
On
3
Bank
Exiting the operating menu
Bank
3
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating menu of the stereo receiver
EXIT
SET
SET
BANK 1
Current channel bank
BANK U
BANK
Changing the channel
bank
̆ /
̄:
1...8, U (User
Bank)
SET: Stores the setting
STORED
SET
B.CH
B.CH
Channel 01...12
CHAN
1.01
1.12
Changing the channel
̆ /
̄:
Current channel or
frequency
SET: Stores the setting
STORED
SET
790.025 MHz
791.125MHz
TUNE
̆ /
̄:
Receiving
Current frequency on
the selected channel
Setting the frequency
for channel bank "U"
frequency in steps of
25 kHz
SET: Stores the setting
STORED
SET
START
CLEAR
SCAN
Scanning the selected
channel bank for free
channels
̆ /
̄:
CLEAR, START
Start scan = START
SET: Scans the selected
channel bank for free
channels
09 CH FREE
SET
Delete result = CLEAR
SET: Releases locked
channels
STORED
SET
SQ LO
Current squelch
threshold
SQ HI
SQELCH
Setting the squelch
threshold
̆ /
̄
:
LO, MID, HI
SET: Stores the setting
STORED
ST--FOC
59
Download from Www.Somanuals.com. All Manuals Search And Download.
SQELCH
SET
SET
SET
SET
STEREO
FOCUS
ST--FOC
Switching between
stereo and FOCUS
operation
Current setting
̆ /
̄
:
Stereo, Focus
SET: Stores the setting
STORED
LTD.OFF
LTD. ON
LTD
Limiter activated or
deactivated
Limiting the volume at
the headphone output
̆ / ̄: OFF, ON
SET: Stores the setting
STORED
HB.OFF
HI--BST
HB. ON
Frequency boost
Boosting the AF
̆ /
̄
:
OFF, ON
activated or deactivated
frequency response
SET: Stores the setting
STORED
CHAN
NAME
DISPLY
Current standard display
Switching between the
standard displays
̆ / ̄: FREQ, NAME,
CHAN
SET: Stores the setting
STORED
SET
NAME
VOCAL
GUCAL
Assigning the receiver
a name
Current receiver name
̆ /
̄:
Enter a name (6
characters) Letters w/o
pronounciation marks,
numbers from 0...9, special
characters, spaces
SET: 5 x next character,
then store
STORED
RESET
60
Download from Www.Somanuals.com. All Manuals Search And Download.
NAME
SET
RST. NO
RST. OK
RESET
Security check
̆ /
̄:
OK, NO
Loading the factory-
preset default settings
"reset" = OK:
SET: Receiver loads factory-
preset default settings (only
pilot tone setting is kept),
receiver is restarted,
standard display appears
"reset" = NO
SET: Reset is cancelled
SET
PLT. ON
PLT. OFF
PILOT
Activating/deactivating
the pilot tone
̆ /
̄:
ON, OFF
Pilot tone transmission
activated or deactivated
SET: Stores the setting
transmission
STORED
LOC.OFF
SET
LOC. ON
LOCK
Lock mode activated or
deactivated
Activating the lock mode
̆ /
̄:
ON, OFF
Lock mode = ON:
SET: Stores the setting,
("STORED") returns to
standard display
Lock mode = OFF:
SET: Stores the setting
STORED
SET
EXIT
Exiting the operation
BANK
BAL.L 1
BAL.R 15
Current balance setting
̆ /
̄
:
BAL.L 1...15,
BAL.--0--, BAL.R 1...15
Adjusting the balance
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment tips for the operating menu
Switching between channel banks
BANK
Bank
Via the “Bank” menu, you can switch between the nine channel banks of the
ew 300 IEM G2 transmitter and receiver. The channel banks “1” to “8” have
up to 12 switchable channels that are factory-preset to a transmission/
channel bank “U” (user bank) also has up to 12 switchable channels to store
your selection out of 1440 transmission/receiving frequencies that are freely
selectable within the preset frequency range.
When switching from one channel bank to another, the channel with the
lowest channel number is automatically displayed. If, during the last scan of
this channel bank, an interfering frequency was detected on the channel with
the lowest channel number, the receiver display panel automatically displays
the next free channel (see below).
Switching between the channels in a channel bank
CHAN
Channel
Via the “Channel” menu, you can switch between the channels in a channel
bank.
Always set the transmitter and the receiver of a transmission link to the same
channel. After scanning a channel bank (see “Scanning the channel banks for
displayed. Set the transmitter to one of the free channels
Selecting the frequencies to be stored
in the channel bank “U”
TUNE
Tune
Via the “Tune” menu, you can select the frequencies to be stored in the
channel bank “U” (user bank).
When you have selected one of the channel banks “1” to “8” and then select
the “Tune” menu, the transmitter or receiver automatically switches to
channel 01 of the channel bank “U”. In this case, “U.01” briefly appears on
the display.
̈ Use the ̆/̄ buttons to select the desired transmission or receiving
frequency. Transmission and receiving frequencies are tunable in 25-kHz
steps within a switching bandwidth of 36 MHz max. For intermodulation-
free frequencies, please refer to the enclosed frequency table.
Scanning the channel banks for free channels
(receiver only)
SCAN
Before putting one or several transmission links into operation, you should
scan the selected channel bank for free channels.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the scan and storing the scan result
̈ Before starting the scan, switch all transmitters of your system off, since
channels used by switched-on transmitters will not be displayed as “free
channels”.
̈ Select the “SCAN” menu.
̈ Select “START” and confirm your selection by pressing the SET button.
After the scan is completed, the number of free channels is displayed.
Pressing the SET button once more will store the scan result and lock all
channels that are used or subject to interference.
Releasing locked channels
̈ Select the “SCAN” menu.
̈ Select “CLEAR” and confirm your selection by pressing the SET button. All
channels in this channel bank can now be selected again.
Multi-channel operation
For multi-channel operation, only use the free channels in a channel bank.
Before putting the transmission links into operation, we recommend
performing an auto scan.
̈ Select a channel bank on a receiver.
̈ Scan this channel bank for free channels. If not enough free channels are
available in the selected channel bank, repeat the scan with another
channel bank.
̈ Apply the scan result to all other transmitters and receivers.
Adjusting the squelch threshold (receiver only)
SQELCH
The receiver is equipped with a squelch that can be adjusted via the “SQELCH”
menu. The squelch eliminates annoying noise when the transmitter is
switched off. It also suppresses sudden noise when there is no longer
sufficient transmitter power received by the receiver.
Note:
Before adjusting the squelch threshold to a different setting, use the
volume control Ƹ to set the volume for the connected headphones to the
minimum.
Ƹ
There are three possible squelch settings:
y LO
y MID = middle
y HI = high
= low
Selecting the setting “LO” reduces the squelch threshold, selecting the
setting “HI” increases the squelch threshold. Adjust the squelch threshold –
with the transmitter switched off – to the lowest possible setting that
suppresses hissing noise.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT!
Notes:
y If the squelch threshold is adjusted too high, the transmission range will
be reduced. Therefore, always adjust the squelch threshold to the
lowest possible setting.
y When in the setting mode of the “SQELCH” menu, pressing the
̄ button for more than three seconds will switch the squelch off.
“SQ.OFF” appears on the display. If no RF signal is being received, his-
sing noise will occur. This setting is for test purposes only.
Stereo/FOCUS selection (receiver only)
ST-FOC
Via the “ST-FOC” menu, you can switch between stereo and FOCUS operation.
In both operating modes, the SR 300 IEM G2 stereo transmitter has to be set
to stereo operation.
When the receiver is set to stereo operation, the left-right signals are
available as usual.
When the receiver is set to FOCUS operation, the left-right signals are mixed
and are available as a mono signal in both headphone channels. Use the ̄/
̆ rocker button to adjust the relative levels of the two separate channels in
Limiting the volume at the headphone output (receiver
only)
LTD
Via the “LTD” menu, you can switch the limiter on and off. With the limiter
switched on, the volume at the headphone output will be reduced.
Activating/deactivating the frequency boost (receiver
only)
HI-BST
Via the “HI-BST” menu, you can boost the AF frequency response at 10 kHz.
As a result, headphones with magnetic transducers sound better.
Adjusting the sensitivity (transmitter only)
Sensitiv
To match the transmitter to the output level of the connected unit (e.g.
mixing console), you can adjust the input sensitivity in four steps of 8 dB via
the “Sensitiv” menu.
The input sensitivity is adjusted too high when close talking distances,
speakers with loud voices or loud music passages cause overmodulation in
the transmission link. In this case, the transmitter’s “PEAK” warning will light
up and the receiver’s level display for audio signal “AF” will show full
deflection.
If, on the other hand, the sensitivity is adjusted too low, the transmission link
will be undermodulated, which would result in a signal with high background
noise.
The sensitivity is correctly adjusted when the level display for audio signal
“AF” shows full deflection only during the loudest passages.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the standard display
DISPLY
Display
Via the “Display” menu, you can select the standard display.
SR 300 IEM G2 stereo transmitter
Selectable standard display
“Frequency”
Contents of standard display
(display of the frequency)
“Bank/Channel”
(display of the channel bank
and channel number)
“Name”
(display of the freely selectable
name)
EK 300 IEM stereo receiver
Selectable standard display
Contents of standard display
“FREQ”
“NAME”
“CHAN”
Entering a name
NAME
Name
Via the “Name” menu, you can enter a freely selectable name for the
transmitter and the receiver. You can, for example, enter the name of the
performer for whom the adjustments have been made.
The name can be displayed on the standard display and can consist of up to
ten characters (transmitter) and up to six characters (receiver) such as:
y letters (without pronounciation marks),
y numbers from 0 to 9,
y special characters e.g. () - . _ and spaces.
To enter a name, proceed as follows:
̈ Press the SET button to get into the setting mode of the “Name” menu.
The first segment starts flashing on the display.
̈ With the ̆/̄ buttons you can now select a character. By briefly pressing
65
Download from Www.Somanuals.com. All Manuals Search And Download.
a button, the display jumps either forwards or backwards to the next
character. If you hold down a button, the display starts cycling
continuously.
̈ Press the SET button to change to the next segment and select the next
character.
̈ Have you entered the name completely? Press the SET button to store
your setting and to return to the previous menu level.
Loading the factory-preset default settings
RESET
Reset
Via the “Reset” menu, you can load the factory-preset default settings. With
the receiver, however, the selected setting for the pilot tone remains
unchanged. After the reset, the unit is restarted and the standard display is
shown on the display panel.
Activating/deactivating the pilot tone evaluation
(receiver only)
PILOT
Pilot
Via the “Pilot” menu, you can activate or deactivate the pilot tone evaluation
of the receiver. The pilot tone is used
y to code the transmitter’s stereo signal,
y to support the squelch function (Squelch).
During stereo operation, the transmitter adds the pilot tone to the
transmitted stereo signal and the receiver detects and evaluates the pilot
tone. When the transmitter is set to mono operation, deactivate the pilot
tone evaluation on the receiver.
You can combine units of first and second generation ew 300 IEM systems
without any problems.
Adjusting the contrast of the graphic display (transmitter
only)
LCD-Contr
Mode
Via the “LCD Contr” menu, you can adjust the contrast of the graphic display
in 16 steps.
Stereo/Mono selection (transmitter only)
Via the “Mode” menu, you can switch the transmitter between mono and
stereo operation.
Note:
Connect any unit that only delivers a mono signal to the transmitter’s left
XLR-3F socket ᕩ and set the transmitter to mono operation. The receiver
automatically “identifies” the transmitted audio signal and does not need
to be set to mono operation. However, you have to deactivate the pilot
tone evaluation on the receiver.
¾
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating/deactivating the lock mode
LOCK
Lock
Via the “Lock” menu, you can activate or deactiveate the lock mode.
The lock mode icon on the display indicates that the lock mode is activated.
To deactivate the lock mode, first press the SET button. Then press the ̆/̄
buttons to select “Lock Off”. If you confirm your selection by pressing the SET
button, the buttons can be operated as usual.
SR 300 IEM G2
EK 300 IEM G2
Exiting the operating menu
EXIT
Exit
Via the “Exit” menu, you can exit the operating menu and return to the
standard display.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Error checklist
Problem
Possible cause
Possible solution
No operation indication
Batteries are flat or
accupack is flat (receiver only)
Replace the batteries or
recharge the accupack
No mains connection (transmitter
only)
Check the connections of the mains
unit
No RF signal
Transmitter and receiver are not on
the same channel
Set transmitter and receiver to the
same channel
Transmitter is out of range
Check the squelch threshold setting
reduce the distance between
transmitter and receiving antenna
RF signal available, no audio
signal, “MUTE” display
appears on the display panel
Transmitter is set to mono operation Deactivate the pilot tone evaluation
and the pilot tone evaluation of the
receiver is activated
on the receiver
Receiver’s squelch threshold is
adjusted too high
Audio signal has a high level
of background noise
Transmitter sensitivity is adjusted
too low
Audio signal is distorted
Transmitter sensitivity is adjusted
too high
No access to a certain channel During scanning, an RF signal has
been detected on this channel and
See “Scanning the channel banks for
the channel has been locked
If problems occur that are not listed in the above table or if the problems cannot be solved with the proposed
solutions, please contact your local Sennheiser agent for assistance.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommendations and tips
... for the EK 300 IEM G2 receiver
y The antenna of the EK 300 IEM G2 should hang freely and be at least 1 cm
away from the body. The antenna must not be in direct contact with the
skin.
... for optimum reception
y Transmission range depends to a large extent on location and can vary
from about 10 m to about 150 m. There should be a “free line of sight”
between transmitting and receiving antennas.
y If, with the SR 300 IEM G2 transmitter, transmission conditions are
unfavourable, you should use a remote antenna which is connected via
antenna cable.
y To avoid overmodulating the receiver, observe a minimum distance of 5 m
between transmitting and receiving antennas.
y Observe a minimum distance of 50 cm between transmitting antennas and
metal objects (such as cross members or reinforced-concrete walls).
... for multi-channel operation
y For multi-channel operation, you can only use the channels in a channel
bank. Each of the channel banks “1” to “8” accommodates up to 12
factory-preset frequencies which are intermodulation-free. For alternative
frequency combinations, please refer to the enclosed frequency table. The
freely selectable frequencies can be selected via the “Tune” menu and can
be stored in the channel bank “U”.
y When using several transmitters simultaneously, interference can be
avoided by maintaining a minimum distance of 20 cm between two
transmitters. For multi-channel applications, use the AC 2 transmitter
Care and maintenance
Use a slightly damp cloth to clean the units from time to time.
Note:
Do not use any cleansing agents or solvents.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
HDX noise reduction
RF link
Inherent noise
of the RF link
Receiver
Transmitter
The evolution wireless G2 series is equipped with HDX, the Sennheiser noise
reduction system that reduces RF interference. It increases the signal-to-
noise ratio in wireless audio transmission to more than 110 dB.
HDX is a wideband compander system which compresses the audio signal in
the transmitter in a 2:1 ratio (related to dB) to lift it above the inherent noise
floor of the RF link. In the receiver the signal is expanded in an identical and
opposite way in a 1:2 ratio to restore the original signal, at the same time
reducing the RF noise to below the noise floor of the receiver.
HDX has been specially developed for high quality radiomicrophone systems.
Note:
Only transmitters and receivers that are equipped with HDX can work
correctly with each other. If non HDX equipment was mixed with HDX, the
dynamic range would be drastically reduced and the transmission would
sound blunt and flat. HDX is permanently active and cannot be switched
off.
Wireless transmission systems
With the ew 300 IEM G2 system, Sennheiser puts an end to cable tangles and
enables complete freedom of movement. The systems operate exclusively in
the UHF band. UHF transmission is extremely reliable and is far less prone to
interference than the overcrowded VHF band – harmonics from mains units,
fluorescent tubes, refrigerators, computers, etc. are virtually eliminated. Also
indoor propagation of UHF radio waves is better than VHF so that the RF
power can be kept low – this is also an advantage when using multi-channel
systems. Finally, UHF frequency ranges are being approved all over the world
for radiomicrophone usage – in some countries licence-free.
Correct adjustment of transmitter sensitivity is vital. Too high and you get
overmodulation and distortion, too low and you get undermodulation and a
noisy signal. Please set the sensitivity correctly for the microphone/usage
and check it before every performance to ensure best operation.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Squelch
Pilot tone squelch
When the transmitter is set to stereo operation, it adds a 19-kHz pilot tone
to the audio signal. The receiver checks incoming audio signals to see if the
pilot tone is present. In the absence of the 19-kHz signal, the receiver’s audio
output will remain muted, even if a strong RF signal is present.
This prevents strong interfering signals from causing hissing noise in the
receiver when the transmitter is switched off.
Field strength-dependent squelch
Depending on the strength of the received RF signal, the receiver’s audio
output is opened or muted. Via the “SQELCH” menu of the receiver, the
squelch threshold can be adjusted in three steps (LO, MID, HI).
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
RF characteristics
Modulation
wideband FM stereo, MPX pilot tone
Frequency ranges
Transmission/receiving frequencies
518–554, 626–662, 740–776, 786–822, 830–866 MHz
8 channel banks with up to 12 factory-preset channels each
1 channel bank with up to 12 freely selectable channels
(1440 frequencies, tunable in steps of 25 kHz)
Switching bandwidth
Nominal/peak deviation
Frequency stability
36 MHz
±24 kHz/±48 kHz
≤ ±15 ppm
AF characteristics
Noise reduction system
AF frequency response
MPX pilot tone (Frequenz/Hub)
S/N ratio (at 1 mV and peak deviation)
THD (at nominal deviation and 1 kHz)
Sennheiser HDX
40–15,000 Hz
19 KHz/ 4 kHz
≥ 91 dB(A)
≤ 0.9 %
General data
Temperature range
Dimensions of carrying case [mm]
Weight of carrying case
–10 °C to +55 °C
380 x 370 x 70
approx. 3000 g
IE 3 in-ear headphones
Frequency response
Max. SPL
Impedance
40–20,000 Hz
118 dB SPL
32 Ω
EK 300 IEM G2 stereo receiver
RF characteristics
Receiver principle
non diversity
Sensitivity (with HDX, peak deviation)
< 2.5 µV at 52 dBA
S/N ratio
rms
Adjacent channel rejection
Intermodulation attenuation
Blocking
≥ 70 dB
≥ 70 dB
≥ 80 dB
Squelch
4 steps:
OFF
LO: 5 dBµV
MID: 15 dBµV
HI: 25 dBµV
Pilot tone squelch (MPX pilot tone)
can be switched off
AF characteristics
Headphone output
3.5 mm jack socket
AF output voltage (at peak deviation 1 kHz ) PHONES 2 x ≥ 100 mW at 32 Ω
AF
Overall device
Power supply
Nominal voltage
2 AA size batteries, 1.5 V
2.4 V
Max. power consumption at nominal voltage
Power consumption with switched-off receiver
Operating time (with batteries)
Operating time (with BA 2015 accupack)
Dimensions [mm]
approx. 190 mA (2 x 30 mW)
≤ 250 µA
6–10 h (depending on volume level)
6–10 h (depending on volume level)
82 x 64 x 24
Weight (incl. batteries)
approx. 170 g
72
Download from Www.Somanuals.com. All Manuals Search And Download.
SR 300 IEM G2 stereo transmitter
RF characteristics
RF output power at 50 Ω
Antenna output
≥ 20 mW, internally adjustable to 10 mW
BNC socket, 50 Ω
AF characteristics
Headphone output
Output power at headphone output
AF input
¼’’ (6.3 mm) stereo jack socket
≥ 100 mW at 32 Ω (2x)
2 x XLR-3 socket, balanced
Max. input voltage (at peak deviation, 1 kHz)
+10dB
u
Input impedance
10 kΩ
Overall device
Power supply
Nominal voltage
10.5–16 V DC
12 V DC
Max. power consumption at nominal voltage
Dimensions [mm]
Weight
approx. 300 mA
212 x 145 x 38
approx. 1100 g
Connector assignment
SR 300 IEM G2:
SR 300 IEM G2:
SR 300 IEM G2:
EK 300 IEM G2:
¼’’ (6.3 mm) stereo jack plug XLR-3M connector
for headphone output
DC connector for power
supply
3.5 mm stereo jack plug for
headphone output
2
1
+
3
Accessories
GA 2 19” rack adapter
AM 2 Antenna mount for mounting antennas to the front of the GA 2
A 1031-U UHF antenna,
passive, omni-directional, can be mounted onto a stand
A 2003-UHF UHF antenna,
passive, directional, can be mounted onto a stand
GZL 1019-A1 Antenna cable with BNC connectors
1 m
5 m
GZL 1019-A5 Antenna cable with BNC connectors
AC 2 Transmitter combiner,
for combining the RF signals of up to four transmitters onto a single antenna
and for powering up to four transmitters
NT 3 Plug-in mains unit for AC 2
IE 3 In-ear headphones
IES 3 1 pair of ear-moulds
BA 2015 Accupack
L 2015 Charger for BA 2015 accupack
CC 2 Carrying case for ew 300 IEM G2 system
73
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
Wir übernehmen für das von Ihnen gekaufte Produkt eine Garantie von 24 Monaten. Ausgenommen hiervon sind
dem Produkt beigefügte Zubehörartikel, Akkus und Batterien; denn diese Produkte haben wegen ihrer Beschaffen-
heit eine kürzere Lebensdauer, die zudem im Einzelfall konkret von Ihrer Nutzungsintensität abhängt.
Die Garantiezeit beginnt ab Kaufdatum. Zum Nachweis heben Sie bitte unbedingt den Kaufbeleg auf. Ohne diese
Nachweise, die der zuständige Sennheiser-Service-Partner prüft, werden Reparaturen grundsätzlich kostenpflichtig
ausgeführt.
Die Garantieleistungen bestehen nach unserer Wahl in der unentgeltlichen Beseitigung von Material- oder Herstel-
lungsfehlern durch Reparatur, Tausch von Teilen oder des kompletten Geräts. Von der Garantie ausgenommen sind
Mängel durch unsachgemäßen Gebrauch (z.B. Bedienungsfehler, mechanische Beschädigungen, falsche Betriebs-
spannung), Verschleiß, aufgrund höherer Gewalt und solche Mängel, die Ihnen beim Kauf bereits bekannt sind. Der
Garantieanspruch erlischt bei Eingriffen in das Produkt durch nicht autorisierte Personen oder Werkstätten.
Im Garantiefall senden Sie das Gerät inklusive Zubehör und Kaufbeleg an den für Sie zuständigen Service-Partner.
Zur Vermeidung von Transportschäden sollte möglichst die Original-Verpackung verwendet werden.
Ihre gesetzlichen Mängelansprüche aus dem Kaufvertrag gegen den Verkäufer werden durch diese Garantie nicht
eingeschränkt. Die Garantie kann weltweit in allen Ländern – außer in den USA – in Anspruch genommen werden, in
denen das jeweils nationale Recht unseren Garantiebestimmungen nicht entgegensteht
ENGLISH
The guarantee period for this Sennheiser product is 24 months from the date of purchase. Excluded are accessory
items, rechargeable or disposable batteries that are delivered with the product; due to their characteristics these
products have a shorter service life that is principally dependent on the individual frequency of use.
The guarantee period starts from the date of original purchase. For this reason, we recommend that the sales receipt
be retained as proof of purchase. Without this proof (which is checked by the responsible Sennheiser service partner)
you will not be reimbursed for any repairs that are carried out.
Depending on our choice, guarantee service comprises, free of charge, the removal of material and manufacturing
defects through repair or replacement of either individual parts or the entire device. Inappropriate usage (e.g. ope-
rating faults, mechanical damages, incorrect operating voltage), wear and tear, force majeure and defects which
were known at the time of purchase are excluded from guarantee claims. The guarantee is void if the product is
manipulated by non-authorised persons or repair stations.
In the case of a claim under the terms of this guarantee, send the device, including acces-sories and sales receipt, to
the responsible service partner. To minimise the risk of transport damage, we recommend that the original
packaging is used. Your legal rights against the seller, resulting from the contract of sale, are not affected by this
guarantee.
The guarantee can be claimed in all countries outside the U.S. provided that no national law limits our terms of gua-
rantee.
FRANÇAIS
La période de garantie pour ce produit Sennheiser est de 24 mois à compter de la date d'achat. Sont exclues, les bat-
teries rechargeables ou jetables livrées avec le produit. En raison de leurs caractéristiques ces produits ont une durée
de vie plus courte liée princi-palement a la fréquence d'utilisation.
La période de garantie commence à la date de I'achat. Pour cette raison, nous vous recom-mandons de conserver
votre facture comme preuve d'achat. Sans cette preuve -qui est vérifiée par Sennheiser -aucune prise en compte de
la garantie ne pourra être retenue.
La garantie comprend, gratuitement, la remise en état de fonctionnement du matériel par la réparation ou le rem-
placement des pièces défectueuses ou dans le cas où la réparation n'est pas possible, par échange du matériel. L'uti-
lisation inadéquate (mauvaise utilisation, dégâts mécaniques, tension électrique incorrecte), sont exclus de la garan-
tie. La garantie est invalidée en cas d'intervention par des personnes non-autorisées ou des stations de réparation
non agrées.
Pour faire jouer la garantie, retournez I'appareil et ses accessoires, accompagne de la fac-ture d'achat, a votre distri-
buteur agrée. Pour éviter des dégâts durant le transport il est recommandé d'utiliser I'emballage d'origine.
Votre droit légal de recours contre le vendeur n'est pas limité par cette garantie. La garan-tie peut être revendiquée
dans tous les pays à l'extérieur des Etats-Unis à condition qu'aucune loi nationale n'en invalide les termes.
278
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
La Sennheiser garantisce il prodotto da voi acquistato per una durata di 24 mesi. Sono esclusi da questa garanzia gli
accessori in dotazione con il prodotto, gli accumulatori e le batterie perché questi prodotti hanno un ciclo di vita più
breve che dipende molto dall'in-tensità d'utilizzo. II periodo di garanzia decorre dalla data dell'acquisto. Fa fede il
docu-mento d'acquisto valido agli effetti fiscali che deve essere conservato. Senza questo documento, che deve
essere controllato dal centro di servizio Sennheiser, qualsiasi ripa-razione viene effettuata solo dietro pagamento.
Le prestazioni gratuite di garanzia possono consistere nell'eliminazione del difetto di materiale o fabbricazione
attraverso la riparazione, la sostituzione di parti o del completo apparecchio, secondo nostro insindacabile giudizio.
Sono esclusi dalla garanzia i guasti derivanti da cattivo uso dell'apparecchio (p.e. mancata osservanza delle istruzioni
all'uso, danneggiamenti meccanici, tensione d'alimentazione errata), dall'usura, da cause di forza maggiore o da mal-
funzionamenti già a vostra conoscenza al momento dell'acquisto. La garanzia decade inoltre in caso di manomissioni
effettuate da persone o centri di manu-tenzione non autorizzate. In caso di un reclamo nel periodo di garanzia vog-
liate inviare I'apparecchio insierne agli accessori in dotazione e il documento d'acquisto al vostro centro servizio auto-
rizzato.
Per evitare danni di trasporto consigliamo di utilizzare I'imballo originale. In caso di guasto questa garanzia non pre-
giudica i vostri diritti derivanti dal contratto d'acquisto verso il negoziante dove è stato acquistato il prodotto.
La garanzia è estesa a tutti i paesi del mondo, tranne agli Stati Uniti, e può essere applica- ta se la legislazione nazi-
onale lo permette.
ESPANOL
EI periodo de garantia para este producto es de 24 meses desde la fecha de compra. Quedan excluidos los accesorios
adjuntos al producto, acumuladores y baterias dado que, debido a sus caracteristicas, la vida útil de dichos productos
es mucho más corta y, en determinados casos, depende concretamente de la intensidad de utililación. EI periodo de
garantia comienza a partir de la fecha de compra. Por eso le recomendamos que guarde el recibo como prueba de
compra. Sin dicha prueba, que será verificada par el respectivo concesionario Sennheiser, cualquier reparación que
sea necesaria será efectuada contra factura.
Según determine el fabricante, las prestationes de garantia consistirán en la eliminación gratuita de defectos de
materiales o fabricatión, por medio de reparación, sustitución de piezas, o bien en la sustitución del aparato com-
pleto. La garantia no tendrá validez en caso de defectos ocasionados par un uso inadecuado (tales como manejo
incorrecto daños mecánicos, tensión de servicio equivocada), desgaste, o bien efectos de fuerza mayor, y desperfec-
tos ya detectados en el momento de adquirir el producto. La garantia carecerá de validez si el defecto se debe a modi-
ficationes y reparaciones hechas en el pro- ducto por personas o talleres no autorizados.
En caso de reclamación sirvase remitir el aparato incluyendo los accesorios y la factura al con-cesionario Sennheiser
encargado de su zona. A fin de evitar daños durante el transporte se aconseja emplear el envase original. Las pre-
tensiones legales por defectos y emanadas del contrato de compraventa frente al vendedor, no quedan limitadas por
esta garantia.
La garantia esta disponible en todos los paises a excepción de EE.UU., siempre que la legislación nacional aplicable no
sea contraria a nuestras determinaciones de garantia.
NEDERLANDS
Wij hanteren voor onze producten een garantietermijn gedurende een periode van 24 maanden. Uitgezonderd hier-
van zijn accessoires, accu's en batterijen die aan het product toegevoegd zijn; op grond van hun geaardheid beschik-
ken deze producten over een kortere levensduur die van geval tot geval van hun gebruiksintensiteit afhangt.
De garantietermijn begint vanaf de aankoopdatum. Daarom dient u de originele aankoop- bon goed te bewaren.
Zonder dit bewijs, dat door de Sennheiser servicepartner wordt gecontroleerd, worden reparaties in principe tegen
kostenvergoeding uitgevoerd.
De garantievergoedingen bestaan naar onze keuze uit het kosteloze verhelpen van mate-riaal- of fabricagefouten
op basis van vervanging (afzonderlijke onderdelen of het complete apparaat) danwel reparatie. De garantie vervalt
bij verkeerd gebruik of onachtzaamheid
(bijv. bedieningsfouten, mechanische beschadigingen, onjuiste bedrijfsspanning), slijtage gevallen van force
majeure of gebreken welke u reeds bij de aankoop heeft gekend. Het recht op garantie vervalt indien reparaties of
wijzigingen zijn uitgevoerd door niet bevoegde personen of werkplaatsen. Indien u aanspraak maakt op garantie
dient u het apparaat, inclusief accessoires en aankoopbon, franco aan de bevoegde servicepartner toe te zenden. Om
beschadigingen gedurende het transport te voorkomen adviseren wij de originele verpakking te gebruiken.
Uw wettelijke garantieclaims tegenover de verkoper worden door deze garantie niet beperkt. De garantie kan
wereldwijd in alle landen buiten de VS worden opgevorderd waarin de geldende nationale wetten niet in tegenstel-
ling zijn met onze garantievoor- waarden.
279
Download from Www.Somanuals.com. All Manuals Search And Download.
EG-Konformitäts-Erklärung / EC Certificate of Conformity / Déclaration de conformité pour la CEE
Certificato di conformitá comunitario / Declaración de Conformidad / EG-Conformiteitsverklaring
SENNHEISER electronic GmbH & Co. KG
Am Labor 1, D-30900 Wedemark
erklären, dass die Produkte / declare that these devices / déclarons que ces appareils
declaramos que estos aparatos / dichiaria che questi apparecchi / verklaren, dat deze toestelen
AC 2
Active Antenna Combiner
Pocket Transmitter
SK 100/300/500 G2
SKM 100/300/500 G2 Transmitter, Hand-held
SKP 100/500 G2
SR 300 G2
Plug-On-Transmitter
Stereo Transmitter
den einschlägigen Anforderungen der EG-Richtlinie 89/336/EEC bzw.
der R&TTE-Direktive 1999/5/EC entsprechen.
Zur sachgemäßen Umsetzung der in den EG-Richtlinien genannten Anforderungen wurden
folgende Normen herangezogen:
conform to the basic requirements of EEC Directive 89/336/EEC resp. R&TTE Directive 1999/5/EC.
To effect correct application of the requirements stated in the EEC Directives,
the following standards were consulted:
sont conformes aux prescriptions fondamentales dans la Directive de la CEE 89/336/EEC or
la Directive R&TTE 1999/5/EC.
Pour mettre en pratique dans la règle de l’art les prescriptions des Directives de la CEE, il a été
tenu compte des normes suivantes:
complen los requimientos básicos de la normativa de la CEE 89/336/EEC resp. de la
normativa R&TTE 1999/5/EC.
Con il fin de realizar de forma adecuada los requirimientos referidos en las normativas de
la CEE fueron consaltadas las siguientes normativas:
sono conformi alla normativa 89/336/EEC resp. alla normativa R&TTE 1999/5/EC.
Per un’appropriato risconto nell’ambito della normativa CEE sono state consultate le seguenti normative:
evereenkomt met de basiseisen van de EG-Richtlijn 89/336/EEC resp. de EG-Richtlijn 1999/5/EC.
Om de eisen, die in de EG-Richtlijnen vermeld zijn, in juiste vorm om te zetten,
zijn van volgende normen gebruik gemaakt:
ETS 300 445
ETS 300 422
Wedemark, Oct, 2003
Klaus Willemsen
Key Projects
Product Marketing
280
Download from Www.Somanuals.com. All Manuals Search And Download.
Bemerkung:
Vor Inbetriebnahme sind die jeweiligen länderspezifischen Vorschriften zu beachten!
Important:
Before putting the device into operation, please observe the respective country-specific regulations!
Important:
Avant d’utiliser l’appareil, veuillez observer les dispositions légales en vigueur dans votre pays.
Nota:
Prima della messa in funzione seguite le prescrizioni vigenti nel paese nel quale viene utilizzato!
Observación:
!Anterior a la puesta en funcionamiento deberán observarse las correspondientes ordenanzas nacionales!
Opmerking:
Voor inbedrijfstelling dient u de afzonderlijke landspecifieke voorschriften in acht te nemen!
281
Download from Www.Somanuals.com. All Manuals Search And Download.
Sennheiser electronic GmbH & Co. KG
30900 Wedemark, Germany
Phone +49 (5130) 600 0
Fax +49 (5130) 600 300
Printed in Germany
Publ.12/03
90612/A01
Download from Www.Somanuals.com. All Manuals Search And Download.
|