SVAT NELowECYTouRCOaNnICSeSe
Web Ready 4 Channel DVR
W/ 80GB Hard Drive
EXPANDABLE SYSTEM
Instruction Manual
Model #
CV0104DVR
Download from Www.Somanuals.com. All Manuals Search And Download.
SVAT NELowECYTouRCOaNnICSeSe
PRODUCT WARRANTY & REGISTRATION
products warranty registration.
The warranty registration for is located under the support tab on the SVAT website.
We take quality very seriously. This is why all of our products come with a one year warranty from the
original purchase date against defects in workmanship and materials.
If you have warranty or support issues please contact us using any of the following methods:
SVAT Electronics USA
2315 Whirlpool St., Unit 333
NIagara Falls, New York
USA 14305
SVAT Electronics Canada
4080 Montrose Road
Niagara Falls, ON
Phone: 866.946.7828
Fax: 888.771.1701
Email: [email protected]
Canada L2H 1J9
Warranty Terms
1. SVAT products are guaranteed for a period of one year from the date of purchase against defects in
workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price
at SVAT's option.
2. When service is required, the warranty is validated by the submission of a fully completed warranty card.
3. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered
with contrary to the applicable instruction manual.
4. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this
warranty.
5. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself
and no other warranty, expressed or implied is provided. SVAT assumes no responsibilities for any other
claims not specifically mentioned in this warranty.
6. This warranty does not cover the shipping cost, insurance or any other incidental charges.
7. You MUST call SVAT before sending any product back for repair. You will be given a Return Authorization
number. When returning the product for warranty service, please pack it carefully in the original box with all
supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem
(include RA #).
8. This warranty is valid only in Canada and the U.S.A.
9. This warranty card cannot be re-issued.
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Graphic Symbol Explanation:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
SVAT NELowECYTouRCOaNnICSeSe
TABLE OF CONTENTS
WHAT IS INCLUDED ............................................................1
WHAT IS COMPATIBLE ........................................................1
SAFETY PRECAUTIONS......................................................2
INTRODUCTION / FEATURES ............................................3
INSTALLATION......................................................................4
NAME & FUNCTION OF EACH PART..................................5
OPERATING PROCEDURE ..............................................6-7
SYSTEM SETUP..............................................................8-24
NETWORK REMOTE CONTROL (OPTIONAL) ............25-40
TROUBLESHOOTING ..................................................41-42
GLOSSARY ........................................................................43
PORT FORWARDING....................................................44-50
SPECIFICATIONS..........................................................51-52
WHAT IS INCLUDED
- 4 Window Warning Stickers
- Mounting Hardware
- 1 Year Warranty
- Instruction Manual
- Online/Toll Free Tech Support
1x DVR Power
Adapter
1x 4CH DVR
5x BNC Connectors
Software
Installation CD
RCA to RCA
wire (male)
RJ-45 Ethernet
Cable
WHAT IS COMPATIBLE
The CV0104DVR is compatible with TVs, VCRs, computers and other SVAT systems including:
CVP403C
CVP500C
CVP3017M
CV65
CVP400C
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
1
SVAT NELowECYTouRCOaNnICSeSe
SAFETY PRECAUTIONS
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact
your local city office , your household waste disposal service or the shop where you
purchased the product.
The power cord is the main power connection. Therefore, constantly plug and unplug of
the power cord might result in malfunction of the product.
Do not install the product in an environment where the humidity is high.
Unless the product is waterproof or weatherproof, otherwise it can cause the image
quality to be poor..
Do not drop the product or subject them to physical shocks.
Except for vandal-proof or shockproof product. Otherwise it will result malfunctions to
occur.
Never keep the product to direct strong light.
It can damage the product.
Do not spill liquid of any kind on the product.
If it gets wet, wipe it dry immediately. Alcohol or beverage can contain minerals that
corrode the electronic components.
Do not expose to extreme temperatures.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
2
SVAT NELowECYTouRCOaNnICSeSe
1. INTRODUCTION
The CV0104DVR is a feature packed digital video recorder that can record four different
camera views simultaenously and play it back at a smooth 30 frames per second.
Customize the recording and set a 24 hour recording schedule based on your
preferences. You can choose to have the DVR record continuously during the day, then
record only when motion is detected at night.
During playback you can display each camera in full screen or view all four without losing
quality. Finding your recorded footage is a breeze. Just search for the time and date it
was recorded and the file will be displayed. Everything is stored on the DVR’s internal
80GB hard drive allowing you weeks of recording. The DVR can be set to overwrite old
footage when the drive does run out of space, allowing you continuous recording, year
after year.
The CV0204DVR also has a built-in internet server for remote viewing. Just plug the
DVR into your internet connection and set it up with the included software. Then simply
type in your IP address to monitor your home or business remotely, from any internet-
enabled computer in the world! You can even play back recorded footage, save picture
or movie files to your computer, and more, all through a web browser.
This versatile surveillance system is an ideal solution for anyone who wants to monitor
their property whether they’re at home or away.
FEATURES
•
•
•
•
•
•
•
•
•
•
Easy setup and installation
Live monitoring through the internet from anywhere in the world
Includes 80GB hard drive
Password protected recording and menus
Supports up to 4 color or B&W cameras
Has built-in motion detection
Find your recorded footage fast and easy
Has built-in time and date stamp
M-JPEG compression technology
Easily connects to any TV or Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
3
SVAT NELowECYTouRCOaNnICSeSe
2. INSTALLATION
CONNECTORS ON THE REAR PANEL
Please setup the connection by following the illustration shown below (detailed
instructions on using the network function can be found in Section 9):
1) Plug the power cord into your DVR and plug it into an outlet. SVAT recommends
plugging it into a surge protected power bar for your device's protection.
2) Plug the BNC Connectors into each video input you plan on using. For
example, if you are using 3 cameras with this system, then plug BNC convertors into
inputs 1-3. Plug BNC convertor into the video output as well.
3) Plug your camera(s) into the video input jacks using the 60ft extension wires.
4) Use an RCA wire to connect your television to the video output of the DVR. Make
sure the RCA wire is plugged into the video input of your television. Note: This
system does not support audio, so if you are using an audio/video RCA wire, there
is no need to plug in the red or white inputs. On your television switch to the
video/audio input channel
5) Your system is now installed and ready for use.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
4
SVAT NELowECYTouRCOaNnICSeSe
3. NAME AND FUNCTION OF EACH PART
3.1 FRONT PANEL
1.
2.
3.
4.
5.
Quad screen display.
CH 1 screen display.
CH 2 screen display.
CH 3 screen display.
CH 4 screen display.
6. MENU: Menu button.
7.
8.
Up direction button.
Down direction button.
9. ENTER: Enter button.
10. REW: Rewind button.
11. STOP: Press this button during playback and recording to return
to monitoring mode.
12. PAUSE: Press this button during playback mode to pause.
13. FF: Fast forward button.
14. PLAY: Play button.
15. REC: Record button.
16. PWR: Power indicator.
3.2 REAR PANEL
1. Video Input [VIDEO IN]: Connect to cameras.
2. DC 12V/ 4.2A [Power Input terminal]: power socket.
3. S-Video Output [S-VIDEO OUT]: Connect to the monitor.
4. Video Output [VIDEO OUT]: Connect to the monitor.
5. Cooling Fan.
6. RJ45: Internet connection terminal.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
5
SVAT NELowECYTouRCOaNnICSeSe
4. OPERATING PROCEDURE
4.1 POWERING ON
This DVR is built to be on at all times, and therefore should be connected to a surge
protected power bar (UPC power backup). Use the power bar's switch to turn the unit off
and on. This is especially important as loss of power while recording could possibly
damage the hard drive. Every time the DVR is powered on, it will auto-detect its
peripherals (self-testing, warm-up, auto detects the hard drive, etc). It will also detect all
video input signals. If it does not detect an input, (eg: no camera present) it will sound an
alarm. Press any button on the DVR to stop the alarm. There are 4 camera inputs and
channels. Disable the unused channels in the Camera Setup Menu to prevent the alarm
from activating every time the unit is powered on.
4.2 MONITORING MODE
Monitoring mode is the default mode after the DVR is powered on. It will display all 4
camera views. To display a specific camera, press the corresponding number. This will
place that camera's view on your entire screen. To display all cameras again, press the
Quad Display button. To start recording, press REC. To stop recording, press STOP.
To reset all DVR settings to their factory default settings (under quad or single display),
press the PAUSE button 5 times. The message ALL SETTING DATA IS INITIALIZED will
be displayed, and after the reset the default password will be set as 111111.
When the reset is completed, the message DVR RESET COMPLETED. TURN OFF AND
ON THE DVR will be displayed. Restart the DVR to continue.
4.3 RECORD MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
6
SVAT NELowECYTouRCOaNnICSeSe
*Note ~ CH1: No block figure next to CH1 indicates that it is not recording.
EACH: Record Type QUAD: Record Type
(M): MASTER HDD
(T): TIMER RECORD (A): ALARM RECORD (M): MIX RECORD
(F): Currently under recording.
VIDEO LOSS: Video input unable to be detected.
CAMERA1: Title for CH 1.
OFF: Channel is set to “OFF”.
4.4 PLAYBACK MODE
To play your recordings, press PLAY. A list of your recordings will appear after a slight
delay. Use the up and down arrows to find the date and time of your recording. The date
format is YY/MM/DD (Year, Month, Day). Press PLAY again to begin playback. In
playback mode you can also choose to view all 4 of your cameras or an individual
camera, if you have recorded in EACH mode. When the recording is done, press STOP
to return to live mode.
During playback, press FF to change the playback speed (FF1, FF2, FF3), or press the
REW button to reverse playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
7
SVAT NELowECYTouRCOaNnICSeSe
5. SYSTEM SETUP
5.1 MENU
1. Main Menu
2. Menu Layer Indication: The device consists of four menu layers.
ꢀ
ꢀꢀ
ꢀꢀꢀ
ꢀꢀꢀꢀ
: First Menu Layer (Main Menu)
: Second Menu Layer
: Third Menu Layer
: Fourth Menu Layer
3. Menu Operation and Setup
Press the up or down button to move the cursor ( > ).
Press the ENTER button to enter the sub menu.
Press MENU button:
Under the second or third menu layer, the system will return to the previous
menu layer (second layer to first layer or third layer to second layer) and will
auto update the modified data.
Under main menu (first menu layer), the system will enter live mode.
Press ENTER to increase or decrease the highlighted setting values.
4. Menu Layer Operation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
8
SVAT NELowECYTouRCOaNnICSeSe
5.2 SYSTEM SETUP
1. Cursor (>) position indicates the current function selected.
2. Press the up and down buttons to move the cursor.
3. Press ENTER button to proceed.
4. Press MENU button to exit “System Setup”.
5. “System Setup” is situated on the second menu layer. Under this menu layer user
may setup the system time, password, return system to default value, and language
preference, etc (VERSION displayed represents the FIRMWARE version).
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
9
SVAT NELowECYTouRCOaNnICSeSe
5.2.1 TIME SETUP
Time Set - Sets the time and date on your DVR. Use the up and down arrows to select a
value to change, and press ENTER to change the value. When you are finished, press
MENU to return to the previous menu screen. Time is in YEAR/MONTH/DAY format
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
10
SVAT NELowECYTouRCOaNnICSeSe
5.2.2 PASSWORD SETUP
1. Cursor (>) position indicates the current function selected.
2. Press the up and down buttons to move the cursor.
3. Press ENTER button to proceed.
4. Press MENU button to exit “Password Setup”.
5. Select MENU PASSWORD to password-protect your DVR menu from unwanted
changes. The password must be entered any time someone tries to access the main
menu. Select MENU PASSWORD again to turn this feature off.
6. Select STOP REC PASSWORD to password protect your DVR while it is recording.
The password must be entered to stop recording. Select STOP REC again to turn
this feature off.
7. When an incorrect password has been entered, “PASSWORD INCORRECT” will be
shown on the display. To disable the message, press button: QUAD, CH1, CH2,
CH3, or CH4.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
11
SVAT NELowECYTouRCOaNnICSeSe
5.2.2.1 CHANGE PASSWORD
1. Press ENTER to show the display above.
2. Enter the current password (CURRENT PASSWORD).
3. Enter new password (NEW PASSWORD).
4. Confirm the new password (CONFIRM PASSWORD).
5. When password change is successful, the system will display
“PASSWORD CHANGED”.
Default Value: 111111
If password entered is incorrect, you will receive a message “NO PASSWORD
CHANGED” to inform you (message flashes three times) and the system returns to
“Password setup” selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
12
SVAT NELowECYTouRCOaNnICSeSe
5.2.3 LOAD DEFAULT
Press enter on this option to return the DVR to its factory default settings. Press enter
again to confirm, or menu to cancel. When the message “DVR RESET COMPLETED
TURN OFF AND ON THE VCR” is displayed, restart the DVR.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
13
SVAT NELowECYTouRCOaNnICSeSe
5.2.4 LANGUAGE SETUP
To setup “LANGUAGE SET” function, press ENTER, to select the desired language
(languages supported are Chinese and English).
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
14
SVAT NELowECYTouRCOaNnICSeSe
5.3 CAMERA SETUP
1. Camera Enable - Select this option to change the camera view combination. For
example, if you select (- - - -), all camera channels will be disabled, and a black
screen will be displayed. If you select (1 2 3 4), all cameras channels will be enabled
and displayed. If you select (- - - 4), only the camera 4 channel will be enabled and
displayed. Use the ENTER button to change these combinations. Note: Disable the
camera channels that you won't be using, or the VIDEO LOSS alarm will sound
during startup and recording.
2. Camera Title - Select this option to change whether you want a custom title
displayed for each camera, for no cameras, or for some cameras. Use the enter
button to select the combination to your preference.
3. Camera Setting - Allows you to change specific settings for each camera. Please
refer to the next section for more details.
4. CH(1-4) Title - Select a camera and use the up/down and ENTER buttons to change
the title (maximum 8 characters). When you are finished, press MENU to confirm.
Example: When highlighting “CH1 TITLE”, press ENTER to show the display below:
V
CH1 TITLE
CAMERA1
“V” indicates the position of the cursor. Press the up and down buttons to move the
cursor, and press ENTER to change the title (maximum 8 characters).
5. All channel titles are setup in the same way.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
15
SVAT NELowECYTouRCOaNnICSeSe
5.3.1 CAMERA SETUP
1. Camera Select - Select the camera channel to which you would like to make
changes (CH 1-4).
2. Record Enable - Press ENTER to switch the channel recording on/off.
3. Motion Detection - Press ENTER to switch the motion detection function on/off.
4. Motion Sensitivity - Press ENTER to set up the motion sensitivity level (1-5, 1 being
the most sensitive).
5. Hue - Press ENTER to adjust the color of the camera.
6. Contrast - Press ENTER to adjust the camera contrast.
7. Brightness - Press ENTER to adjust the camera brightness
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
16
SVAT NELowECYTouRCOaNnICSeSe
5.4 RECORD SETUP
1. Record Type - Press ENTER to select between QUAD and EACH mode. QUAD
mode will record all four cameras, but will not let you view each camera individually
during playback. EACH mode will record all four cameras and allow you to view
each camera individually during playback.
2. Video Quality - Press ENTER to change between LOW, MEDIUM or HIGH video
quality. Higher quality settings will result in better image clarity but larger file sizes.
Lower quality settings will result in reduced image clarity but smaller file sizes.
3. Frame Rate Options: Frame Rate is the number of frames recorded per second. 30
frames per second is the maximum, and provides smooth video playback. Fewer
frames per second result in the video being less smooth, but smaller in size. There
are 2 frame rate options in this menu:
-Timer Rec Frame Rate - Press enter to set the recording frame rate when the “T”
(timer) mode is set up under schedule record.
-Motion Rec Frame Rate - Press enter to set the recording frame rate when
“M” (motion) or “A” (alarm) modes are set up under schedule record.
Recording frame rates available:
NTSC: 30, 15, 10, 7, 5, 4, 3, 2, 1
PAL: 25, 12, 8, 6, 4, 3, 2, 1
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
17
SVAT NELowECYTouRCOaNnICSeSe
5.4.1 RECORD MODE
1. This menu allows you to set up the preferred type of scheduled recording (time,
motion/time&motion, off) throughout a 24 hour day. For example, you may want to
record continuously from 9:00 AM to 5:00 PM, but only record when motion is
detected the rest of the time. IMPORTANT: after you make changes and return to
monitoring mode, you must press RECORD. When you press STOP, the DVR will
not adhere to your Record Mode settings until you press RECORD again. Use the
up and down and ENTER buttons to change the type of recording for the specified
hour of the day.
2. T: Time, indicates continuous record.
3. M: TIME+MOTION
(1) When motion has been detected, it will be recorded by “Motion Record
Frame Rate”.
(2) Otherwise, it is recorded by “Time Record Rate”.
_
4.
: OFF. The DVR will not record during the specified time.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
18
SVAT NELowECYTouRCOaNnICSeSe
5.5 BUZZER SETUP
1. ALARM ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the alarm
when motion event has been detected (this setup is only active when the system is
under record status and schedule record is setup to "M" (Mix).
2. VIDEO LOSS ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the
alarm when video loss has been detected (this setup is only active when the system
is under record or live status).
3. HDD FULL ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the
alarm when hard disk is full (this setup is only active when the system is under
record status).
4. BUZZER TIME: Press ENTER to setup the buzzer time to continuous (CONT), and
press any button to release this setup.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
19
SVAT NELowECYTouRCOaNnICSeSe
5.6 EVENT LIST
1. Cursor (>) position indicates the current function selected.
2. Press
and
button to move the cursor to the desired item
3. Press ENTER to proceed.
4. Press MENU to exit “EVENT LIST” selection.
5. “EVENT LIST” is situated on the second menu layer. Under this menu layer user
may setup “TIME SERACH” or “EVENT SEARCH”.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
20
SVAT NELowECYTouRCOaNnICSeSe
5.6.1 TIME SEARCH
1. TIME SEARCH: Displays system recording time (begin and end).
2. Press
and
button to select the desired time and date.
3. Press ENTER to setup playback starting time and date.
4. Press MENU to exit “TIME SEARCH” selection.
5. Press PLAY button to play.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
21
SVAT NELowECYTouRCOaNnICSeSe
5.6.2 EVENT SEARCH
1. EVENT SEARCH: Displays all recording events, every page consists of 7 events,
and maximum 63 stored events.
2. Press PLAY button to play the selected event.
BEGIN:
END:
05/01/15 15:00:01
05/01/15 15:00:06
Displays the beginning and end time of each event.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
22
SVAT NELowECYTouRCOaNnICSeSe
5.7 HARD DRIVE SETUP
1. When item “OVERWRITE” has been selected, press ENTER to enable overwrite
when both MASTER or SLAVE HDD is full (2 options: OVERWRITE or STOP).
2. MASTER HDD: displays the capacity of the MASTER HDD.
3. MASTER HDD USED: displays the capacity of the MASTER HDD already used.
4. SLAVE HDD: displays the capacity of the SLAVE HDD.
5. SLAVE HDD USED: displays the capacity of the SLAVE HDD already used.
F N/A indicates HDD not installed or unable to be detected.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
23
SVAT NELowECYTouRCOaNnICSeSe
5.7.1 FORMAT
1. When proceeding “FORMAT” function, the above display will be shown.
2. When password entered is correct, the screen will display the message
“PASSWORD CORRECT”, “HDD FORMATTED” (flashes 3 times), indicating hard
disk format is successful.
3. When password entered is incorrect, the screen will display “PASSWORD
INCORRECT” (flashes 3 times), and return to “HARD DRIVE” selection.
Once the user formats the hard disk drive (MASTER), the camera title returns to its
default setting (CAMERA1/ CAMERA2/ CAMERA3/ CAMERA4), because this setup is
stored in the hard disk drive (MASTER).
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
24
SVAT NELowECYTouRCOaNnICSeSe
6. NETWORK REMOTE CONTROL (OPTIONAL)
6.1 NETWORK DVR SETUP
Connect the RJ-45 cable to the network port on the back of the DVR, and the other end
to your router. Use IPEdit.exe to test the DVR. The network access software is not MAC
compatible. It is only compatible with a Windows PC running using the Internet Explorer
browser.
Note:
Before using PPPoE and DDNS (recommended) connection method, you
must first setup an IP Address (using IPEDIT.exe).
6.1.1 ONLINE WITH DHCP SERVER
Use IPEDIT.exe to find the installed Network DVR. Select this Network DVR in the
Camera List Window. The default configuration will be shown on the right window.
Update the IP status.
Online with DHCP Server
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
25
SVAT NELowECYTouRCOaNnICSeSe
6.1.2 ONLINE WITHOUT DHCP SERVER (STATIC IP)
1. Use IPEdit.exe to find the installed Network DVR.
2. The Internet DVR without IP allocated by DHCP will have a default IP Address
of 169.254.1.13
3. Select this Internet DVR on the Camera List Window.
4. The default configuration will be shown on the right window.
5. Under MSDOS mode enter “IPCONFIG” to access Geteway, IP, and Netmask
setting values.
Online without DHCP Server
After the “Submit” button is clicked, the IP information of this Network DVR will be
updated.
6.2 CONNECTING NETWORK DVR
3 methods for connecting Network DVR:
1.
2.
3.
Online using Intranet or Static IP
Online using ADSL (PPPoE) Router
Online using DDNS Server
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
26
SVAT NELowECYTouRCOaNnICSeSe
6.2.1 ONLINE USING
Setup similar to “6.1 Network DVR Setup”.
6.2.2 ONLINE USING ADSL (PPPOE) ROUTER
Setup similar to “6.4.3.3 Connect to ADSL by PPPoE mode”.
6.2.3 ONLINE USING DDNS SERVER (RECOMMENDED)
The DDNS service provides the dynamic IP to users to gain access to resources
connected to the Internet via a cable or DSL connection. Once you’ve decided to apply
supports register free service). Paid DDNS service is applied to long-term users. For
more information, please refer to “6.4.4 DDNS Setup”.
6.2.4 ONLINE CONNECTION
Note: To access the DVR from outside your router’s network, you will need to forward
port 80 to your Network DVR. This must be done through your router, and the process
varies based on your router's make and manufacturer. For instructions on port
forwarding, see the guide at the end of this manual. (Page 45)
Start the Internet Explorer, enter the IP Address of the Network DVR into the Address
field, such as 192.168.1.13, or within IPedit, double click on your DVR from the list.
Before connection, “User name” and “Password" will be requested:
Default User Name: admin
Default Password: 1234
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
27
SVAT NELowECYTouRCOaNnICSeSe
6.2.4.1 ONLINE CONNECTION
Before entering remote connection, install ActiveX (If you are running Windows XP you
most likely have it) and check your browser setup by following the procedures below:
A. Open Internet Explorer under “Tools” and select “Internet Options”.
B. Select “Security,” then “Custom Level”.
Security -> Custom Level
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
28
SVAT NELowECYTouRCOaNnICSeSe
Change ActiveX settings to the ones seen above
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
29
SVAT NELowECYTouRCOaNnICSeSe
The graphic below will be shown the first time you install the ActiveX Control. Please
select "Yes" to accept installation.
Download ActiveX Control
Live view will be displayed when installation is successful.
Live display under ActiveX mode
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
30
SVAT NELowECYTouRCOaNnICSeSe
6.3 MAIN DISPLAY
Remote control DVR - Main Menu
1. Live display.
2. DVR control button.
3. Video setup.
4. Configuration: Enter detail setup
Recording: Displays recording setup menu (for video recording).
Snapshot: Pop-up window displays live images, right mouse click to save.
Note: To view complete interface, PC resolution must be adjusted to 1024*768.
6.3.1 LIVE DISPLAY
•
•
•
•
•
•
View/ Make changes on image display.
Rotate/ Make changes on image direction.
Image Recording/ Record function setup.
Save Current Picture/ Save the current image.
Welcome! Administrator/ Display current user name.
About/ Version description.
Move the cursor inside the image range, right mouse click to display 9 function selections:
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
31
SVAT NELowECYTouRCOaNnICSeSe
6.3.2 VIEW
Two types of display method:
1. Resizable: Adjustable image size.
2. Actual size: The actual image size.
6.3.3 ROTATE
Four types of rotate settings:
1. Rotate 0: Default state
2. Rotate 180: Rotate the image by 180 degrees.
3. Flip horizontal: Image flips horizontally.
4. Flip vertical: Image flips vertically.
6.3.4 IMAGE RECORDING
Image Recording Setup Display:
Save as JPEG: Save as picture file
Save as AVI: Save as AVI animation file
Save as JPEG:
No Limit: Unrestricted image storage (continuous).
Number: Image storage according to “number”.
Save interval: Image storage according to “1/10 second” (e.g.: Enter “10”, then 1 frame is
stored per second. Enter “50”, then 1 frame is stored in 5 seconds).
Size: Image storage according to “size”.
Time: Image storage according to “time”.
Save Path: Image storage according to “Save Path”.
Pre Name: Image storage according to “Prefix Name”.
Save as AVI:
No Limit: Unrestricted image storage (continuous).
Number: Image storage according to “number”.
Save interval: Image storage according to “1/10 second” (e.g.: Enter “10”, then 1 avi file
is stored per second. Enter “50”, then 5 avi files are stored in 5 seconds).
Size: Image storage according to “size”.
Frame Rate: Image storage according to “frame rate”.
Time: Image storage according to “time”.
Maximum Number of Frame in Each File: Image storage according to “maximum frame”.
Save Path: Image storage according to “Save Path”.
Pre Name: Image storage according to “Prefix Name”.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
32
SVAT NELowECYTouRCOaNnICSeSe
6.3.5 SAVE CURRENT PICTURE
Select to save live images.
6.3.6 DVR CONTROL SETUP
Supports DVR remote control function (Please refer to 6.1 Front Panel Buttons and
Controls, on page 5).
6.3.7 QUALITY SETTING
Network DVR provides 5 image quality settings. The user can select the quality setting
from the “Quality” list box.
•
•
•
•
•
Highest
High
Medium
Low
Lowest
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
33
SVAT NELowECYTouRCOaNnICSeSe
6.3.8 RESOLUTION SETTING
The network DVR provides six resolution settings. The user can select the quality setting
from the “Resolution” list box.
•
•
•
•
•
•
176 x 144
160 x 120
320 x 240
352 x 288
640 x 480
704 x 576
Note: The device supports auto video system detection (NTSC/ PAL).
6.3.9 ADVANCED SETTINGS
Network DVR provides the advanced settings for the following:
•
•
•
•
Brightness
Contrast
Saturation
Hue
6.4 CONFIGURATION (FOR ADVANCED USERS)
Only the administrator can select the “Configuration”; the ordinary user account does not
have this privilege to access this function.
6.4.1 SYSTEM SETTING
The number on Port 1 and Port 2 may be changed, press “OK” button to save the setting.
System Setting Display
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
34
SVAT NELowECYTouRCOaNnICSeSe
•
Reboot DVR: The system needs 30 seconds to reboot the DVR's network
(Rebooting does not affect hard drive recording).
Firmware update (Please refer to 6.4.5).
Restore Factory Default
•
•
6.4.2 USER SETTING
•
•
•
•
User Authorization Setting
Add User or Change Password
Delete User Account
Current Users
User Setting Display
6.4.2.1 USER AUTHORIZATION SETTING
Select item “Needed” to enable user authorization function, then each time before login
to Network DVR the Login window will request for “Username” and “Password”. To
disable user authorization function, select item “No Need”.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
35
SVAT NELowECYTouRCOaNnICSeSe
6.4.2.2 NEW USER / CHANGE PASSWORD
Enter a new user name and password information to create a new user account, or enter
an existing user account, then set a new password to replace the old password, and
select “OK” to create the account or change password. After selecting “OK” button, the
“Current User List” would display the newly created user account (Maximum 20 users,
user name and password setup are limited to 10 characters).
6.4.2.3 DELETE USER
Enter the user account that you wish to delete, click “OK” to delete the account. After
selecting “OK” button, the selected user account will be deleted from the “Current User
List”.
6.4.3 NETWORK SETTING
6.4.3.1 FIXED IP
To setup follow the steps below:
1. Select item “Manually”.
2. Enter “IP Address”, “Subnet mask”, and “DNS”.
3. Click “OK” button to save the setting.
User Setting Display
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
36
SVAT NELowECYTouRCOaNnICSeSe
6.4.3.2 DHCP
The “DHCP” is automatically set as the default network setting of the Network DVR.
When a Network DVR is connected into the LAN, it will issue DHCP packets to request
an IP address that is dynamically assigned by the DHCP server. If it is unable to get a
DHCP address, the Network DVR will assign a default IP address such as
“169.254.1.13”.
6.4.3.3 CONNECT TO ADSL BY PPPoE MODE
To setup follow the steps below:
1. After setup, rebooting enables automatic connection to ADSL.
2. Enter the “Username” and “Password” fields with the account and password
provided by the ISP.
3. If item “Send mail after connected” is selected, the mail will be automatically sent
when connected to the ISP.
4. Click “OK” button to save the settings.
Note: In order to activate the function, it is necessary to reboot the device after the setup.
ADSL Setting Display
If the Network DVR and ADSL modem are connected by a hub, the user can select “Dial
On Power Up” to perform the connect operation. However, if the Network DVR and ADSL
modem are connected directly, then please note the following steps below.
1. Power off Network DVR.
2. Connect Network DVR directly to the ADSL modem (using RJ-45 Ethernet port).
3. Power-up Network DVR.
4. Network DVR will start dialing.
5. Once connected, mail the IP address information to the preset e-mail address.
6. After 10 times of connection failure, it aborts the operation and the user can
reconnect it by LAN to find the cause.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
37
SVAT NELowECYTouRCOaNnICSeSe
Note: If item "Send mail after connected" is selected, then the Network DVR will send a
mail that contains the message "Dial Up IP Address/ Netmask/ Gateway/ DNS Server"
will be mailed to the preset e-mail address.
Connection Message Send to User
6.4.4 DDNS SETTING (RECOMMENDED)
Press "DDNS" server connection to start-up the function. It can autonomously and
automatically contact the DDNS provider service whenever the router detects that its
public IP address has changed. The router logs on to an account you setup and
maintain, and updates the account with its latest public IP address. You may register at
detect IP changes and even give your DVR an easy to remember domain name.
To setup follow the steps below:
2. Apply domain name.
3. Click the "Enable" button. Enter "Username" and "Password" and the domain name
you registered with dyndns.org.
DDNS Setting
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
38
SVAT NELowECYTouRCOaNnICSeSe
After registering the domain name, please enter the information supplied by the
administrator to the Network DVR DDNS Account Setting. Select "Enable" button to start-
up DDNS server, and press "Submit" button to save the setting.
6.4.5 FIRMWARE UPDATE
SVAT may occasionally release newer versions of firmware for your DVR. Please check
is supplied, you may update to the new version (bin file) through your PC by following
the procedures below:
1. In the configuration menu of your network DVR, click on Firmware Update.
2. Select browse and select the .bin firmware file.
3. Press Open.
3. Press Upload and follow the onscreen instructions.
Select the Firmware to be Updated
Uploading the Selected Firmware
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
39
SVAT NELowECYTouRCOaNnICSeSe
Firmware Update.
Press "here" button (1) to update Firmware. Press "here" button (2) to delete the file. The
message below displays the writing progress of the firmware update. When Firmware
update is completed, it will show 100%, and a message "Click here to reboot DVR
browser" will be displayed, requesting to restart the Network DVR.
Firmware Update Display.
Firmware Update Completed, prompt to restart the device.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
40
SVAT NELowECYTouRCOaNnICSeSe
7. TROUBLESHOOTING
Problem
Solution
No display on television
1. Make sure all RCA and power cables are
plugged in securely and in their proper places.
2. Make sure your television is on the correct
channel (input mode).
DVR not recording
1. Make sure recording is enabled in each
camera's setting. Go to Menu>Camera
Setup>Camera Setting and enable recording
for each camera if it has been disabled.
2. Make sure recording is enabled and set to the
correct recording setting in scheduled
recording. Go to Menu>Record Setup>Record
Mode. If a line (-) is over any hour of the day,
that means recording is disabled for that time
period. Press enter to enable recording for that
hour. Also make sure you press REC when
you return to Monitoring Mode, or your
scheduled recording will not take effect.
3. Your disk may be full. By default the DVR
should start rewriting over your earliest
recorded files, but this option may be disabled.
Go to Menu>Hard Drive Setup>Disk Full. Set it
to OVERWRITE.
4. Make sure your DVR is in Monitoring Mode,
and not at a menu screen or in Playback Mode.
No playback
1. There is a delay while the DVR searches for
your recorded files. Wait a few moments and
your files should appear.
2. Make sure you are not in Recording Mode.
Pressing PLAY during recording will have no
effect. Press STOP first.
3. If you have just formatted your drive or your
drive is otherwise empty, there will be no files
to play back.
During playback, I can't switch
to different camera views.
To switch between cameras during playback, you
must have recorded your file in EACH mode.
Change this setting using Menu>Record
Setup>Record Type.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
41
SVAT NELowECYTouRCOaNnICSeSe
Problem
Solution
Unexpected Alarms (beeps)
go off.
1. Video Loss - One of your cameras are
disconnected. There are a few options:
connect a camera, disable that camera's
channel if you don't want a camera installed in
that channel, or disable the VIDEO LOSS alert
alarm by going to MENU>Buzzer Setup>Video
Loss Alert. Press enter to disable it.
2. HDD Full - A buzzer activates when your HDD
is full. Set the HDD to overwrite to avoid this
problem. It will record new footage over your
oldest footage. Go to Menu>Hard Drive
Setup>Disk Full. Press enter to set it to
OVERWRITE.
3. Alarm Alert may be set to ON, which sounds a
short alarm whenever motion is detected. Go
to Menu>Buzzer Setup>Alarm Alert and press
ENTER to disable it.
No picture from camera(s)
1. Make sure all the cameras’ RCA and power
cables are plugged in securely and in their
proper places.
2. Make sure the camera channels enabled on
your DVR. Go to Menu>Camera
Setup>Camera Enable to enable your
camera's channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
42
SVAT NELowECYTouRCOaNnICSeSe
8. GLOSSARY
DDNS - Dynamic Domain Name Service. Use dyndns.org to track your IP on the Internet
and assign it an easy to remember domain name instead of an IP number.
Dynamic IP (DHCP) - A DHCP server assigns an IP address automatically when a
device connects to the network. A dynamic IP can change when a device is restarted.
Firmware - The built-in software that controls the DVR's functions. Higher firmware
version may be released to provide additional features. Please check this product at
System Setup to view the firmware version running on your DVR.
Frame Rate - The number of frames that are recorded per second. Setting recording to
30 frames/second will provide smooth playback but will increase the file size. Setting
recording to lower frame rates will make playback less smooth, but will decrease the file
size and you will be able to record more video on your DVR's hard drive.
IP (Internet Protocol) - A network and transport protocol used for exchanging data over
the Internet. The address is a string of four numbers separated by periods (such as
111.22.3.444) used to represent a computer or other device on the Internet.
Monitoring Mode - The default mode when the DVR starts up. It will display a quad view
of your cameras.
Playback Mode - After you press PLAY and select a recorded file, the DVR will enter
this mode. You cannot enter recording mode or access the menu system directly from
this mode.
Record Mode - The DVR enters this mode after you press record, or when there is a
scheduled time or motion recording. You cannot enter playback mode or enter the menu
system directly from this mode.
Static IP - An IP assigned to a device that does not change.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
43
SVAT NELowECYTouRCOaNnICSeSe
9. PORT FORWARDING YOUR ROUTER FOR USE
WITH A NETWORK DVR
1. Belkin Router
2. DLINK Wireless Router
3. LINKSYS Wireless Router
4. LINKSYS Wired Router
5. Westell Router
6. Netgear Router
7. Netopia Router
8. Motorola Router
9. 2 Wire Router
Note: Many routers require restarting for changes to take effect.
1. BELKIN ROUTER
The port forwarding process is dependant on the brand and model number of the router
being used. Port forwarding of a router is required with your system to allow user access
to your network device. Regardless of the Belkin Wired Router being used, the process
of port forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. With most Belkin routers the port forwarding screen is located within
the Virtual Servers option tab. The set up instruction outlined below is an example of port
forwarding using Belkin Model F5D8230-4.
Step 1:
Open your web browser. Enter the router IP address in the address bar as shown below
(192.168.2.1), followed by pressing Enter.
Step 2:
In the status page, select the Virtual Servers option located down the left hand side of
the page.
Step 3:
In the Administrator's page, enter your password. The default setting is left blank. Select
the Submit button.
In the Virtual Server screen proceed as follows:
Enable the system by checking the enabled box
In the Description column enter a description of your DVR.
In the Inbound Port entry field enter in the first box the first number of the port you need
to port forward (e.g. 80) and the ending port number in the second box in (e.g. 80)
In the Type field, select Both.
In the Private IP Address field, enter the IP address of the DVR
In the Private Ports column re-enter in the first box, the first number of the port you
need to port forward (e.g. 80) and in the second box the ending port number (e.g. 80).
Select the Apply Changes button located at the top of the page to save your changes
Port forwarding is now complete!
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
44
SVAT NELowECYTouRCOaNnICSeSe
2. D-LINK ROUTER
The port forwarding process is dependant on the brand and model number of the router
being used. Port forwarding of a router is required with your system to allow user access
to your network device. Regardless of the DLINK Wireless Router being used, the
process of port forwarding is similar. You will need to enable the ports by locating the
port range forwarding screen. With some DLINK routers the port forwarding screen is
located within the Applications and Games or Filters tab; in others it is located in the
advance tools tab. The set up instruction outlined below is an example of port forwarding
using DLINK Model DI-524.
Step 1:
Open your web browser. Enter the router IP address in the address bar as shown below,
(192.168.0.1) followed by pressing Enter.
Step 2:
Enter the user name admin. Leave the password blank followed by pressing the OK
button.
Step 3:
Select the Advanced tab.
Step 4:
Select the Virtual Server tab.
In the Name field enter a description of your DVR.
In the Private IP field enter the DVR IP address.
In the Protocol field, select Both.
In the Private port enter the port number you need to port forward (e.g. 80)
In the Public port re-enter the port number you entered in the private port field (e.g. 80)
Select the Schedule to Always.
If more ports are required to be port forwarded, repeat the above steps. When complete,
select the Apply button located at the bottom of the page to save your changes.
Port forwarding is now complete!
3. LYNKSYS WIRELESS ROUTER
Enable the system by checking the enabled box.
The port forwarding process is dependant on the brand and model number of the router
being used. Port forwarding of a router is required with your system to allow user access
to your network device. Regardless of the Linksys Wireless Router being used, the
process of port forwarding is similar. You will need to enable the ports by locating the
port range forwarding screen. With some Linksys routers the port forwarding screen is
located within the Applications and Games or Filters tab; in others it is located in the
advance tools tab. The set up instruction outlined below is an example of port forwarding
using Linksys Model WRK54GV2.
Step 1:
Open your web browser. Enter the router IP address in the address bar as shown below
(192.168.1.1), followed by pressing Enter.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
45
SVAT NELowECYTouRCOaNnICSeSe
Step 2:
Enter the user name and password as shown below (admin by default) and press the
OK button.
Step 3:
Select the Applications and Gaming tab.
Step 4:
Select the Port Range Forwarding tab.
In the Application column enter a description of your DVR.
In the Start entry field enter the first number of the port you need to port forward (e.g. 80)
In the End entry field enter the last number of the port you need to port forward (e.g. 80)
In the Protocol field, select Both.
In the IP address field, enter the computer network IP address you recorded previously
during the Quick Set Up Guide process.
Enable the system by checking the enabled box.
Select the Save settings button located at the bottom of the page to save your changes.
Port forwarding is now complete!
4. LINKSYS WIRED ROUTER
The port forwarding process is dependant on the brand and model number of the router
being used. Port forwarding of a router is required with your system to allow user access
to your network device. Regardless of the Linksys Wired Router being used, the process
of port forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. With some Linksys routers the port forwarding screen is located
within the Applications and Games or Filters tab; in others it is located in the advance
tools tab. The set up instruction outlined below is an example of port forwarding using
Linksys Model BEFSR41.
Step 1:
Open your web browser. Enter the router IP address in the address bar as shown below
(192.168.1.1), followed by pressing Enter.
Step 2:
Enter the user name and password as shown below (admin by default) and press the OK button.
Step 3:
Select the Applications and Gaming tab.
Step 4:
Select the Port Range Forwarding tab.
In the Application column enter a description of your network device (e.g. monitor)
In the Start entry field enter the first number of the port you need to port forward (e.g. 80)
In the End entry field enter the last number of the port you need to port forward (e.g. 80)
In the Protocol field, select Both.
In the IP address field, enter the computer network IP address you recorded previously
during the Quick Set Up Guide process.
Enable the system by checking the enabled box.
Select the Save settings button located at the bottom of the page to save your changes.
Port forwarding is now complete!
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
46
SVAT NELowECYTouRCOaNnICSeSe
5. WESTELL ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the Westell Router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. The set up instruction outlined below is an example of port forwarding
a Westell Router using Westell VERSALINK.
Step 1:
Open your web browser.
Enter the router IP address (192.168.62.1) in the address bar as shown below, followed
by pressing Enter.
Step 2:
Enter ‘admin’ in the User Name and ‘admin’ in the Password dialog box to enter the
Westell configuration page.
Step 3:
Select ‘Configuration’
Step 4:
Select the Define Custom Service Tab.
Step 5:
In the Port Range setting screen, proceed as follows:
In the Service Name field, type DVR
In the Global Port Range field, enter in the first box, the first number of the
port you need to port forward (e.g. 80) and in the second box the ending port
number (e.g. 80)
In the Base Host Port enter the first port to be forwarded (80)
In Protocol, select TCP
Select the Next button when complete
Step 6:
A confirmation window will appear on the screen which shows the same information just
entered. Select the close button to continue. You should now be in the Configuration
Window screen. Select the Define Customer Service button, followed by selecting the
Port Forwarding Ranges of Port option. Finally click the Next button.
Step 7:
Use the Select a Service drop down box and select the configuration just created. Select
the Enable button. Port forwarding is now complete!
6. NETGEAR ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the Netgear router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. The set up instruction outlined below is an example of port forwarding
a Netgear Router using Netgear Model DG 824M.
Step 1:
Open your web browser.
Enter the router IP address (192.168.0.1)in the address bar as shown below, followed by
pressing Enter.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
47
SVAT NELowECYTouRCOaNnICSeSe
Step 2:
Enter ‘admin’ in the User Name and ‘password’ in the Password dialog box to enter the
Westell configuration page.
Step 3:
Select the Services button in the Security menu
Step 4:
In the Services menu, select the Add Custom Service button
In the Services screen, proceed as follows:
In the Name field, select DVR
In the Type field, select TCP
In the Start Port field, enter the first number of the port you need to port forward (e.g. 80)
In the Finish Port field, enter the ending port number (e.g. 80)
Check the Apply buttonNext, in the Security option, select Rules
Next, in the Rules screen select Add in the inbound services.
Next, in the Inbound services proceed as follows:
In the Service drop down list, select the newly created DVR entry.
In the Action field, select ALLOW always.
In the Send to LAN Server field, enter your computers IP address.
In the WAN Users field, set to Any.
In the Log field, set to Never.
Click on Apply.
Port forwarding is now complete!
7. NETOPIA ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the Netopia router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. The set up instruction outlined below is an example of port forwarding
a Netopia Router using Netopia Model 3346.
Step 1:
Open your web browser.
Enter the router IP address (192.168.62.1)in the address bar as shown below, followed
by pressing Enter.
Step 2:
Enter ‘admin’ in the User Name and ‘1234’ in the Password dialog box followed by ‘OK’
to enter the Netopia configuration page.
Step 3:
Select Expert Mode
Step 4:
Select the Yes, enter expert mode button
Select Configure followed by selecting NAT
Step 5:
Select the Define Custom Service button
Select Port Forwarding Range of Ports, followed by Next
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
48
SVAT NELowECYTouRCOaNnICSeSe
Step 6:
In the Port Range screen, proceed as follows:
In the Service Name field, type DVR
In the Global Port Range field, enter in the first box, the first number of the port you
need to port forward (e.g. 80) and in the second box the ending port number (e.g. 80)
In the Base Host Port enter the first port to be forwarded (80)
In Protocol, select TCP
Select the Next button when complete
Step 7:
In the Nat Configuration Menu, use the Service Name down box and select the
configuration just created. Select the Enable button.
Port forwarding is now complete!
8. MOTOROLA ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the Motorola router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. The set up instruction outlined below is an example of port forwarding
a Motorola Router using Motorola Model SBG 1000.
Step 1:
Open your web browser.
Enter the router IP address (192.168.0.1) in the address bar as shown below, followed
by pressing Enter.
Step 2:
Enter ‘admin’ in the User ID and ‘motorola’ in the Password dialog box followed by
clicking ‘Log In’ to enter the Motorola configuration page.
Step 3:
Select the Gateway button
Step 4:
Select the Port Forwarding button
Step 5:
Select In the Add New Port Forward Entry screen, proceed as follows:
In the Template field, select Custom
In the Name field, select DVR
In the Port Start field, enter the first number of the port you need to port forward (e.g. 80)
In the Port End field, enter the ending port number (e.g. 80)
In the LAN IP Address field enter the IP address (192.168.0.1)
Check the Enable button
Finally click the Add button, followed by selecting the Apply button.
Port forwarding is now complete!
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
49
SVAT NELowECYTouRCOaNnICSeSe
9. WIRE ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the 2 Wire Router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen (Note: in many 2 wire systems, it is located in the firewall setting). The
set up instruction outlined below is an example of port forwarding a 2 Wire Router using
2 Wire Model 1800G.
Step 1:
Open your web browser.
Enter the router IP address (192.168.1.254) in the address bar as shown below, followed
by pressing Enter.
Step 2:
Select the Firewall Tab.
Step 3:
Select Firewall Settings..
Step 4:
In the Edit Firewall Settings tab, select add a new user defined application
Step 5:
Select the Back button to return to the Edit Firewall Screen
In the Edit Firewall Settings proceed as follows:
In the Application Name field, type DVR
In the Protocol selection, select TCP
In the Port field, enter in the first box, the first number of the port you need to port
forward (e.g. 80) and in the second box the ending port number (e.g. 80).
Select the Add Definition button.
Step 6:
In the Edit Firewall Settings proceed as follows:
In the Select a Computer field, select DVR
In the Edit a Firewall Setting, check the Allow Individual Applications box and
highlight the DVR application which you just created. Click Add.
Finally select the Done button at the bottom of the screen. Port forwarding is now
complete!
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
50
SVAT NELowECYTouRCOaNnICSeSe
10. DVR SPECIFICATIONS
Functionality ..................................................Simplex
Video Compression........................................Modified MJPEG
Resolution ......................................................720 x 480
Recording
Frame Rate ............................................Max 120 FPS
Recording Time ......................................Max 60 days, 15 days with 4 cameras
Resolution ..............................................Max 640 x 224
Qualities ..................................................Low, Medium, High
Modes ....................................................Manual, Schedule, Motion Detection
Method ....................................................Quad, Each
Recording Media ....................................1 x 3.5" 80GB IDE HDD (Max 500GB)
Video
Format ....................................................NTSC
Video Loss ..............................................Auto Detection
Inputs ......................................................4ch BNC
Display Output ........................................1ch BNC, 1ch S-Video
Live
Viewing....................................................Quad View, Single Screen
Resolution ..............................................720 x 480
Frame Rate ............................................Max 120 FPS
Play
Search Mode ..........................................By Time, Date, Event
Speed......................................................Normal, Fast Forward
Mode ......................................................Quad, Each
Display
OSD and System Menu ..........................Yes
OSD Language ......................................English/Traditional Chinese
Time and Date Stamp ............................Yes
Password Protection ......................................Menu Password, Stop Recording Password
Alarm..............................................................Motion Detection, Video Loss
Network
Network Protocol ....................................TCP/IP, PPPoE, DDNS, SMPT
LAN IP ....................................................Static, Dynamic
Network Connection................................10/100 BaseT Ethernet (RJ-45)
Operating System ..........................................Written using Linux
Processor ......................................................Propietary
Disk Full Warning ..........................................Yes
Automatic Overwrite Option ..........................Yes
LED Indicators................................................Power, Record, Play, Live
Housing Material ............................................Aluminum
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
51
SVAT NELowECYTouRCOaNnICSeSe
Housing Color ................................................Graphite Grey
Power Input ....................................................DC 12V 2A
Power Adapter Input ......................................AC 100-250V 50/60Hz
Cooling ..........................................................Fan Based
Operating Environment
Temperature............................................41°F ~ 104°F
Humidity ..................................................30 ~ 80%
Dimensions ....................................................12.6" x 1.8" x 10.6"
Weight ............................................................6.6lbs (without HDD)
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
52
SVAT NELowECYTouRCOaNnICSeSe
SVAT SUPPORTS CRIME STOPPERS
Crime Stoppers programs are operated as non-profit charities and are managed by a
volunteer board of directors who raise funds and pay rewards to individuals who
anonymously call with information that helps solve crime.
Rewards are paid for tips that lead to the arrest and indictment of people charged with
felony offences, and to date Crime Stoppers statistics show a conviction rate of
approximately 95%.
To receive more information about Crime Stoppers or to make a charitable donation
please fill in the fields on the back of this page, cut on the dotted line and mail in.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
SVAT NELowECYTouRCOaNnICSeSe
SVAT SUPPORTS CRIME STOPPERS
To receive more information about Crime Stoppers or to make a charitable donation
please fill in the fields below, cut on the dotted line and mail in.
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
SVAT NELowECYTouRCOaNnICSeSe
NOTES
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
55
SVAT NELowECYTouRCOaNnICSeSe
Download from Www.Somanuals.com. All Manuals Search And Download.
CV0104DVR
SVAT NELowECYTouRCOaNnICSeSe
Disclaimer
SVAT does not endorse any of SVAT products for any illegal
activities. SVAT is not responsible or liable in any way
shape or form for any damage, vandalism, theft or any
other action that may occur while a SVAT product is in use
by the purchaser.
Model #
CV0104DVR
Download from Www.Somanuals.com. All Manuals Search And Download.
|