SOYO Network Card ETEQ82C663 AGP User Manual

SY-5EHM/5EH5 V1.3

Super 7

Motherboard

************************************************

Pentium^®Class CPU supported

ETEQ82C663 PCI/AGP Motherboard

AT Form Factor

************************************************

User's Guide

Technical Reference

Download from Www.Somanuals.com. All Manuals Search And Download.

SPORTON INTERNATIONAL INC.

DeclarationofConformity

According to 47 CFR, Part 2 and 15 of the FCC Rules

Declaration No.: D872907

July.10 1998

The following designated product

EQUIPMENT: Main Board

MODEL NO.: SY-5EH

Which is the Class B digital device complies with 47 CFR Parts 2 and 15 of the FCC rules.

Operation is subject to the following two conditions : (1) this device may not cause

harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

The product was tested with the following configuration:

Monitor: SONY/AK8GDM17SE2T

Modem: ACEEX/IF AXDM1414

Printer: HP/DS17XU2225

Keyboard: SILITED/GYUM99SK

This declaration is given for the manufacturer

SOYO COMPUTER INC.

No.21, Wu-Kung 5 Rd., Hsing Chuang City,

Taipei Hsien, Taiwan, R.O.C.

The test was carried out by

SPORTON INTERNATIONAL INC.

6F, No. 106, Hsin Tai Wu Rd., Sec. 1, His Chih,

Taipei Hsien, Taiwan, R.O.C.

Download from Www.Somanuals.com. All Manuals Search And Download.

SOYO™

About This Guide

SY-5EHM/5EH5 V1.3

This User's Guide is for assisting system manufacturers and end users in setting up

and installing the Motherboard. Information in this guide has been carefully checked

for reliability; however, no guarantee is given as to the correctness of the contents.

The information in this document is subject to change without notice.

by Soyo Computer Inc. You may not reproduce, transmit, transcribe, store in a

retrieval system, or translate into any language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of

this publication without express written permission of Soyo Computer Inc.

Trademarks

Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the

property of their owners.

Disclaimer

Soyo Computer Inc. makes no representations or warranties regarding the contents

of this manual. We reserve the right to revise the manual or make changes in the

specifications of the product described within it at any time without notice and

without obligation to notify any person of such revision or change. The information

contained in this manual is provided for general use by our customers. Our

customers should be aware that the personal computer field is the subject of many

patents. Our customers should ensure that their use of our products does not

infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid

patent rights of third parties and not to infringe upon or assist others to infringe upon

such rights.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions set forth

in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software

clause at 252.277-7013.

Product Rights

Products mentioned in this manual are mentioned for identification purpose only.

Product names appearing in this manual may or may not be registered trademarks

or copyrights of their respective companies.

If you need any further information, please come to our home page on the Internet.

The address is "http://www.soyo.com.tw".

Tested To Comply

Edition: June 2001

Version 1.0

5EHM/5EH5 V1.3 SERIAL

With FCC Standards

FOR HOME OR OFFICE USE

POST CONSUMER

100% _{RECYCLED PAPER}

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

SY-5EHM/5EH5 V1.3

Table of Contents

SY-5EHM/5EH5 V1.3 MOTHERBOARD LAYOUT............................... 1

CHAPTER 1 INTRODUCTION........................................................... 2

1-1

1-2

1-3

KEY FEATURES ............................................................ 2

HANDLING THE MOTHERBOARD ............................... 5

ELECTROSTATIC DISCHARGE PRECAUTIONS......... 5

CHAPTER 2 HARDWARE SETUP.................................................... 6

2-1

2-2

2-3

PREPARATIONS.......................................................6

UNPACKING THE MOTHERBOARD ........................7

INSTALLATION GUIDE .............................................8

CHAPTER 3 BIOS SETUP UTILITY................................................ 36

3-1

3-2

3-3

3-4

3-5

3-6

3-7

3-8

3-9

3-10

3-11

STANDARD CMOS SETUP ......................................... 38

BIOS FEATURES SETUP............................................ 41

CHIPSET FEATURES SETUP..................................... 47

POWER MANAGEMENT SETUP ................................ 50

PNP/PCI CONFIGURATION SETUP ........................... 55

LOAD SETUP DEFAULTS ........................................... 58

LOAD BIOS DEFAULTS............................................... 58

INTEGRATED PERIPHERALS .................................... 59

SUPERVISOR PASSWORD ........................................ 63

USER PASSWORD...................................................... 64

IDE HDD AUTO DET1ECTION .................................... 65

CHAPTER 4 DRIVERS INSTALLATION ......................................... 66

Download from Www.Somanuals.com. All Manuals Search And Download.

Motherboard Features

SY-5EHM/5EH5 V1.3

SY-5EHM/5EH5 V1.3 Motherboard Layout

PS/2 Mouse

Connector

Flash BIOS

AT Power

Lithium

Battery

SMC

COM 2

PRT 1

FDC37C669Q

ATX Power

USB1

JP44

JP5

COM 1

IR1

AGP Slot

PCI Slot #3

PCI Slot #2

PCI Slot #1

IDE 1 IDE 2 FDC

ISA Slot #3

ISA Slot #2

ETEQ

EQ82C6638

EQ82C6629

ISA Slot #1

JP7

JP8

Power

LED

RST

PW2

(Optional)

Keylock

P.B. SRAM

64Kx64

TAG SRAM

SIMM 1

SIMM 2

Turbo

LED

SPK

JP22

HDD LED

DIMM 2

DIMM 1

P.B. SRAM

64Kx64

JP1

JP9

SW2

for model 5EHM V1.x

only (1 MB Cache)

featuring two P.B. SRAM.

JP10

SW1

JP12

SY-5EHM/5EH5 V1.3 Platform

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

SY-5EHM/5EH5 V1.3

Chapter 1

INTRODUCTION

The SY-5EHM/5EH5 V1.3 AGP/PCI Motherboard is a

high-performance AT form-factor system board. SY-5EHM/5EH5

V1.3 uses the ETEQ82C663 AGP/PCI Chipset technology and

supports Pentium^®class processors. This Motherboard is fully

compatible with industry standards and adds many technical

enhancements.

1-1 KEY FEATURES

ꢀ CPU

ꢁ Supports Intel Pentium Processor P54C/P55C series

CPUs featuring speeds of 100-233 MHz

ꢁ Supports Cyrix 6x86/6x86L/6x86MX CPUs with

PR150-PR266 MHz speeds and Cyrix M II-300-366 MHz

speeds CPU

ꢁ Supports AMD K5 CPUs running at PR100-PR166 MHz

speeds, AMD K6 CPUs running at speeds of 166-300

MHz speeds, AMD K6-2 266-550 MHz Speeds CPU and

AMD K6-III 400-450 MHz speeds CPU

ꢁ Supports IDT X86 CPU C6/2-200/225, IDT WinCip

2-233-300 MHz speeds CPU

ꢁ Supports Rise mP6 PR-266 MHz speeds CPU

ꢁ Features Socket 7 for CPU easy upgrade

ꢁ Supports P54C/P55C series SIMM Mode and CPU Stop

Clock

ꢀ L2 Cache Controller

ꢁ On-board 512KB(SY-5EH5 V1.3) or 1MB (SY-5EHM V1.3)

Level 2 Pipeline Burst SRAM Cache

ꢀ DRAM Controller

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

SY-5EHM/5EH5 V1.3

ꢁ Supports 2 strips of 168-pin SDRAM unbeffured DIMM

2 x 168-pin DIMM banks support 8/16/32/64/128/256 MB

unbuffered DIMM modules

ꢁ Support 2 strips of 72-pin FPM/EDO SIMM 2 x 72-pin

SIMM banks support 8/16/32/64 MB SIMM modules

ꢁ Memory configuration:

ꢂ System memory: 8MB to 640MB with EDO/SDRAM

SY-5EHM/5EH5 V1.3 PLATFORM FEATURES

Board Size

Socket 7

4-layer PCB, 22x23cm(8.7”x9.1”), AT Form Factor

Socket for Pentium^®class CPUs

with Host Bus frequency of 66/100MHz Supports:

ꢁ

Intel Pentium^®Processors P54C/P55C (100-233MHz)

Cyrix 6x86™ (PR166+-PR200+),

Cyrix 6x86 MX™ (PR166-PR266) and Cyrix M II™

(300~366)

ꢁ

AMD K5™ (PR100-PR166), and AMD K6™ (166-300)

and AMD K6™-2 (266~500) and AMD K6-III 400/450

IDT X86 CPU C6/W2 200/225 and X86 CPU 2 (233-300)

Rise mP6 PR266

ꢁ

Chipset

ATX Power

ETEQ82C663 PCI/AGP Bus Chipset

20-pin Male Connector

AT Power

JP12

10-pin Male Connector

3-pin CPU Cooling Fan Connector

DIMM Bank (DIMM1 & DIMM2)

Memory

ꢁ 168-pin Unbuffered EDO/SDRAM DIMM Module

ꢁ Supports 8~256MB DIMM in each Bank

ꢁ Supports ECC configuration

SIMM Bank (Bank1,2)

ꢁ 72-pin SIMM Modules

BIOS

System BIOS built-in, Award BIOS

ꢁ

APM, ACPI and "Plug-and-Play" function

Supports multiple-boot function

DMI utility

PCI Slots

ISA Slots

IDE1, IDE2

3 x 32-bit Bus Mastering Slots

3 x 16-bit ISA Slots

2 x 40-pin Bus Mastering E-IDE/ATAPI Ports

ꢁ

IDE1: Primary IDE Device Connector

IDE2: Secondary IDE Device Connector

Supports Ultra DMA/33

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

SY-5EHM/5EH5 V1.3

1 Floppy Disk Drive (FDD) Port

FDC

(Supports 1.2MB/1.44MB/2.88MB and LS120/3-mode FDD)

SIR

5-pin Serial Infrared Device Connector

Keylock

Reset

Speaker

TB_LED

HDD_LED

PWRBT

JP1

5-pin KeyLock Connector

2-pin Reset Switch Connector

4-pin PC Speaker Connector

2-pin Turbo LED Connector

2-pin IDE Device LED Connector

ATX Power On/Off Switch 2-pin Connector

Single or Dual voltage selection Jumper

CMOS Clear Jumper

JP5

JP7

CPU bus clock frequency Jumper

CPU Frequency of 83MHz Jumper

SDRAM frequency Jumpers

JP8

JP9, JP10

JP22

CPU Burst Mode Jumper

JP44

WOL (Wake-On-LAN) 3-pin Connector

CPU frequency Settings Jumper

CPU Voltage Selection Jumper

SW1

SW2

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

SY-5EHM/5EH5 V1.3

1-2 HANDLING THE MOTHERBOARD

To avoid damage to your Motherboard, follow these simple rules

while unpacking:

ꢁ Before handling the Motherboard, ground yourself by grasping

an unpainted portion of the system's metal chassis.

ꢁ Remove the Motherboard from its anti-static packaging. Hold

the Motherboard by the edges and avoid touching its

components.

ꢁ Check the Motherboard for damage. If any chip appears loose,

press carefully to seat it firmly in its socket.

Warning: Do not apply power if the Motherboard appears

damaged. If there is damage to the board, contact your

dealer immediately.

1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS

Make sure to ground yourself before handling the Motherboard or

other system components. Electrostatic discharge can easily

damage the components. Note that you must take special

precautions when handling the Motherboard in dry or

air-conditioned environment.

To protect your equipment from electrostatic discharge, take the

following precautions:

ꢁ Do not remove the anti-static packaging until you are ready to

install.

ꢁ Ground yourself before removing any system component from

its protective anti-static packaging. (To ground yourself, grasp

the expansion slot covers or other unpainted portions of the

computer chassis.)

ꢁ Frequently ground yourself while working or use a grounding

strap.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Chapter 2

HARDWARE SETUP

Congratulations on your purchase of SY-5EHM/5EH5 V1.3 Super 7

^TMMotherboard. You are about to install and connect your new

Motherboard.

Note: Do not unpack the Motherboard from its protective

anti-static packaging until you have made the following

preparations.

2-1 Preparations

Gather and prepare all the following hardware equipment to

complete the installation successfully:

Pentium compatible processor with CPU cooling fan.

DIMM memory module (s)

Computer case and chassis with adequate power supply unit

Monitor

Keyboard

Pointing Device (Serial or PS/2 mouse)

Speaker(s) (optional)

Disk Drives: HDD, CD-ROM, Floppy drive…

External Peripherals: Printer, Plotter, and Modem (optional)

10. Internal Peripherals: Modem and LAN cards (optional)

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

2-2 Unpacking the Motherboard

When unpacking the Motherboard, check for the following items:

ꢁThe SY-5EHM/5EH5 V1.3 ETEQ82C663 PCI/AGP

Motherboard

ꢁThe Quick Start Guide *

ꢁThe Installation CD-ROM *

ꢁThe CPU Retention Set

ꢁOne IDE Device Flat Cable

ꢁOne Floppy Disk Drive Flat Cable

ꢁOne bracket with one 9-pin serial connector, attached with

9-pin flat cable, and one 6-pin PS/2 mouse connector,

attached with 6-pin cable.

ꢁOne bracket with one 25-pin connector paraller connector

attached with 25-pin flat cable and one 9-pin serial connector

attached with 9-pin flat cable.

* If your board comes with a driver disc and a paper manual, the Quick Start Guide

and the CD-ROM are not included in the package.

Warning: Do not unpack the Motherboard from its

anti-static packaging until you are ready to install it.

Like most electronic equipment, your Motherboard may be

damaged by electrostatic discharge. To avoid permanent damage to

components ground yourself while working by using a grounding

strap. Otherwise, ground yourself frequently by touching the

unpainted portion of the computer chassis to drain the static

charges.

Handle the Motherboard carefully, holding it by the edges.

You are now ready to start the installation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

2-3 Installation Guide

We will now begin the installation of the Motherboard. Please follow

the step-by-step procedure designed to lead you to a complete and

correct installation.

Step 1. CPU Installation

Follow these instructions to install your Pentium^®class processor

correctly.

Locate the CPU socket labeled Socket 7 on your Motherboard and

note the distinctive pinhole arrangement.

Note the corresponding pinhole arrangement on the processor.

Blunt Edge

CPU

Socket 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Follow these steps to install the CPU in the Socket 7:

1. Lift the socket handle up to a vertical position.

2. Align the blunt edge of the CPU with the matching pin-hole

distinctive edge on the socket.

3. Seat the processor in the socket completely and without

forcing.

4. Then close the socket handle to secure the CPU in place.

Step 2. CPU Fan (JP12) Installation

Your Pentium^®processor kit comes with a cooling fan. Mount the

fan on the processor according to the instructions provided by the

manufacturer. The fan is a key component that will ensure system

stability. The fan prevents overheating, therefore prolonging the life

of your CPU.

Note: Remember to connect the fan to the appropriate power

source.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Step 3. CPU Voltage Setting (SW2,JP1)

JP1

Single or Dual

Voltage Selection

SW2

12 3 4 5

CPU Voltage

Please verify the correct voltage with your dealer before installation.

Use the following tables to set SW2 to the proper "Voltage Value",

according to the specifications marked on your CPU: This

Motherboard comes with pre-configured setting of CPU voltage.

However the voltage of your CPU maybe different with the default

setting.

ꢀ CPU VOLTAGE SETTING (SW2,JP1)

SW2 is used to set the CPU core voltage, JP1 is used to select the

CPU voltage type single voltage or dual voltage.

Most CPUs currently on the market are dual voltage CPUs. There

are however single voltage CPUs (older types), take note of this.

ꢁ Single Voltage (CPU: P54C, AMD-K5, Cyrix 6x86, IDT X86

CPU C6/W2,Rise mP6)

ꢁ Dual Voltage (CPU: P55C, AMD-K6, AMD-K6-2, AMD-K6-III,

Cyrix 6x86L,Cyrix 6x86MX, Cyrix M II)

Those processors may come in various voltages on different

markets. Therefore, always make sure you know the type of the

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

CPU you are installing and adjust the settings on SW2 accordingly.

This motherboard supports CPU core voltages from 2.0 to 3.5V in

0.1V increments. Use the following tables to set the CPU voltage

jumpers SW2 to match the voltage value of your CPU:

CPU Core Voltage Setting: SW2

Voltage Value

3.5V

off

3.4V

3.3V

3.2V

3.1V

3.0V

2.9V

2.8V

2.7V

2.6V

2.5V

2.4V

2.3V

2.2V

2.1V

2.0V

off

Single or Dual voltage selection: JP1

Voltage Type

JP1

Single Voltage

(P54C, AMD-K5, Cyrix 6x86,IDT

X86 CPU C6/W2)

Dual Voltage

(P55C,

AMD-K6,

AMD-K6-2,

AMD-K6-III, Cyrix 6x86L, Cyrix

6x86MX, Cyrix M II, Rise mP6)

Voltage Settings for Various Processors

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Voltage Value: SW2 JP1

Processor

Voltage Setting

Single Voltage

VORE:3.3V

VI/O:3.3V

Intel P54C - P100

Intel P54C - P133

12 3 4 5

Single Voltage

VORE:3.5V

VI/O:3.5V

Intel P54C - P166

Intel P54C - P200

12 3 4 5

Dual Voltage

VORE:2.8V

VI/O:3.3V

Intel P55C - P166

Intel P55C - P200

Intel P55C - P233

12 3 4

AMD K5 - PR100

AMD K5 - PR133

AMD K5 - PR166

Single Voltage

VORE:3.5V

VI/O:3.3V

12 3 4 5

Dual Voltage

VORE:2.9V

VI/O:3.3V

Dual Voltage

VORE:3.2V

VI/O:3.3V

AMD K6 166

AMD K6 200

12 3 4 5

AMD K6 233

AMD K6 266

AMD K6 300

AMD K6-2 266

AMD K6-2 300

AMD K6-2 333

AMD K6-2 350

AMD K6-2 366

AMD K6-2 380

AMD K6-2 400

AMD K6-2+ 450

AMD K6-2 533

Dual Voltage

VORE:2.2V

VI/O:3.3V

12 3 4 5

AMD K6-2 450

AMD K6-2 475

AMD K6-2 500

AMD K6-III 400

AMD K6-III 450

Dual Voltage

VORE:2.2V

VI/O:3.3V

12 3 4 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Voltage Settings for Various Processors (continued)

Processor

Voltage Value: SW2

JP1

Voltage Setting

AMD K6-2 450

AMD K6-2 475

AMD K6-2 500

AMD K6-III 400

AMD K6-III 450

Dual Voltage

VORE:2.4V

I/O:3.3V

12 3 4 5

The AMD K6-2 and K6-III come in several versions with different voltages.

Please ask your dealer for the correct voltage.

Dual Voltage

AMD K6-2 550

VORE:2.3V

VI/O:3.3V

12 3 4 5

The Cyrix 6x86(L) come in

Cyrix 6x86(L) PR166+ several versions with different

Cyrix 6x86(L) PR200+ voltages. Please ask your

dealer for the correct voltage.

Cyrix 6x86MX-PR166*

Cyrix 6x86MX-PR200*

Cyrix 6x86MX-PR233*

Cyrix 6x86MX-PR266*

Cyrix M II 300*

Cyrix M II 333*

Cyrix M II 366*

Cyrix M II 400*

Dual Voltage

VORE:2.9V

VI/O:3.3V

12 3 4 5

Dual Voltage

VORE:2.2V

VI/O:3.3V

Cyrix M II 433*

12 3 4 5

IDT X86 CPU C6/2-225 Single Voltage

IDT X86 CPU 2-266

IDT X86 CPU 2-300

VORE:3.5V

VI/O:3.3V

IDT X86 CPU

C6/2-200*

Single Voltage

VORE:3.3V

IDT X86 CPU 2-233* VI/O:3.3V

12 3 4 5

Dual Voltage

VORE:2.8V

VI/O:3.3V

Rise mP6 PR266

12 3 4

* Set the proper CPU voltage according to the marking on the CPU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Step 4. CPU Frequency Setting (SW1)

1 2 3 4 5 6

SW1

Host Bus Frequency

1 2 3 4

SW1

Frequency Multiplier

The SY-5EHM/5EH5 V1.3 Motherboard is designed to support most

Pentium^®class processors currently on the market. Jumpers SW1

is used to configure the Motherboard frequency parameters to

match the working frequency of your CPU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

CPU FREQUENCY SETTING (SW1)

SY-5EHM/5EH5 V1.3

ꢀ

Configure the SW1 jumpers to the settings that match your CPU speed.

Refer to the following tables to set the Frequency Multiplier and Host Bus

Frequency of your CPU:

Frequency Multiplier

Host Bus Frequency

Host Bus

Frequency

Multiplier

1.5/3.5x

2.0x*

2.5x

off

66MHz

off

75MHz

83MHz

3.0x

95MHz

4.0x

97MHz

4.5x

100MHz

5.0x

5.5x

Example: If the working frequency of your CPU is 266MHz, then

select Multiplier=4.0x and Host Bus Frequency=66Mhz accordingly.

Also, as newer and higher frequency CPUs may not be listed in this

section, please refer to the tables CPU Frequency Settings for Various

Processors on page 8 for complementary information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Please refer to the following table that gives you the correct

frequency settings for the specific brand and model of CPU you are

installing on this Motherboard.

Frequency Settings for Intel^®Processors

Processor

Frequency Setting

Bus

AGP

PCI

Frequency

Ratio

Clock Clock Clock Setting: SW1

Intel P54C - P100

Intel P54C - P133

Intel P54C - P166

Intel P54C - P200

Intel P55C - P166

Intel P55C - P200

Intel P55C - P233

1.5 x 66MHz 66MHz 33MHz

2.0 x 66MHz 66MHz 33MHz

2.5 x 66MHz 66MHz 33MHz

3.0 x 66MHz 66MHz 33MHz

2.5 x 66MHz 66MHz 33MHz

3.0 x 66MHz 66MHz 33MHz

3.5 x 66MHz 66MHz 33MHz

* Set the proper CPU frequency according to the marking on the CPU.

Frequency Settings for AMD™ Processors

Processor

Frequency Setting

Bus

Clock

AGP

Clock

PCI

Frequency

Ratio

Clock Setting: SW1

AMD K5 - PR100

AMD K5 - PR133

1.5 x 66MHz

2.0 x 66MHz

66MHz

33MHz

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Frequency Settings for AMD™ Processors (Continued)

Processor

Frequency Setting

Bus

Clock

AGP

Clock

PCI

Frequency

Ratio

Clock Setting: SW1

AMD K5 - PR166

AMD K6 - 166

AMD K6 - 200

AMD K6 - 233

AMD K6 - 266

AMD K6 - 300

AMD K6-2 266

AMD K6-2 300

2.5 x 66MHz

3.0 x 66MHz

3.5 x 66MHz

4.0 x 66MHz

4.5 x 66MHz

4.0 x 66MHz

4.5 x 66MHz

66MHz

33MHz

1 2 3 4 5 6

33MHz

1 2 3 4 5 6

33MHz

1 2 3 4 5 6

33MHz

1 2 3 4 5 6

33MHz

1 2 3 4 5 6

33MHz

1 2 3 4 5 6

33MHz

1 2 3 4 5 6

33MHz

1 2 3 4 5 6

3.0 x 100MHz 66MHz

33MHz

1 2 3 4 5 6

5.0 x 66MHz

3.5 x 95MHz

66MHz

33MHz

AMD K6-2 333

1 2 3 4 5 6

63.4MHz 31.7MHz

AMD K6-2 333

AMD K6-2 350

1 2 3 4 5 6

3.5 x 100MHz 66MHz

33MHz

AMD K6-2 366

5.5 x 66MHz

66MHz

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Frequency Settings for AMD™ Processors (Continued)

Processor

Frequency Setting

Bus

Clock

AGP

Clock

PCI

Frequency

Ratio

Clock Setting: SW1

AMD K6-2 380

AMD K6-2 400

AMD K6-2 450

AMD K6-2 475

AMD K6-2 500

AMD K6-2 533

AMD K6-2 550

AMD K6-2+ 450

AMD K6-III 400

AMD K6-III 450

4.0 x 95MHz

63.5MHz 31.75MHz

1 2 3 4 5 6

4.0 x 100MHz 66MHz

4.5 x 100MHz 66MHz

33MHz

5.0 x 95MHz

63.5MHz 31.75MHz

5.0 x 100MHz 66MHz

33MHz

1 2 3 4 5 6

5.5 x 97MHz 64.67MHz 32.33MHz

1 2 3 4 5 6

5.5 x 100MHz 66MHz

4.5 x 100MHz 66MHz

4.0 x 100MHz 66MHz

4.5 x 100MHz 66MHz

33MHz

1 2 3 4 5 6

* Set the proper CPU frequency according to the marking on the CPU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Frequency Settings for Cyrix™ Processors

Processor

Rati Bus

AGP

PCI

Frequency

Frequency Setting

Clock Clock Clock Setting: SW1

Cyrix 6x86 - PR166+ 2.0 x 66MHz 66MHz 33MHz

Cyrix 6x86 - PR200+ 2.0 x 75MHz 75MHz 37.5MHz

1 2 3 4 5

Cyrix MX - PR166**

Cyrix MX - PR200**

Cyrix MX - PR233**

Cyrix MX - PR266**

Cyrix M II - 300**

Cyrix M II - 333**

Cyrix M II - 366**

2.0 x 66MHz 66MHz 33MHz

2.5 x 66MHz 66MHz 33MHz

2.0 x 75MHz 75MHz 37.5MHz

2.5 x 75MHz 75MHz 37.5MHz

2.5 x 83MHz 55MHz 27.5MHz

3.5 x 66MHz 66MHz 33MHz

3.0 x 75MHz 75MHz 37.5MHz

4.0 x 66MHz 66MHz 33MHz

3.5 x 75MHz 75MHz 37.5MHz

3.0 x 83MHz 55MHz 27.5MHz

1 2 3 4 5

2.5 x 100MHz 66MHz 33MHz

1 2 3 4 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Frequency Settings for Cyrix™ Processors (Continued)

Processor

Rati Bus

AGP

PCI

Frequency

Frequency Setting

Clock Clock

Clock Setting: SW1

Cyrix M II – 400**

Cyrix M II - 433**

3.0 x 95MHz 63.5MHz 31.75MHz

3.0 x 100MHz 66MHz 33MHz

1 2 3 4 5

Frequency Settings for IDT™ Processors

Processor

Frequency Setting

Bus

AGP

PCI

Frequency

Ratio

Clock Clock Clock Setting: SW1

IDT X86 CPU 2-233

IDT X86 CPU 2-266

IDT X86 CPU 2-300

3.5 x 66MHz 66MHz 33MHz

2.33 x 100MHz 66MHz 33MHz

2.5 x 100MHz 66MHz 33MHz

1 2 3 4 5

Frequency Settings for Rise™ Processors

Processor

Frequency Setting

Bus

AGP

PCI

Frequency

Ratio

Clock Clock Clock Setting: SW1

3.0 x 66MHz 66MHz 33MHz

2.0 x 100MHz 66MHz 33MHz

1 2 3 4 5

Rise mP6 PR266

1 2 3 4 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Step 5. Set JP7,JP9,JP10 for SDRAM frequency

JP7 is used to indicate the frequency of the CPU bus clock to the ETEQ

chipset.

JP9 and JP10 are used to determine that the SDRAM is running at the

frequency of the CPU bus clock or the AGP clock.

CPU BUS AGP BUS

JP10

JP7

JP9

SDRAM Clock

Clock

66MHz

Clock

66MHz

1-2

2-3

1-2

2-3

1-2

2-3

1-2

2-3

1-2

2-3

1-2

2-3

1-2

2-3

1-2

2-3

1-2

2-3

1-2

2-3

66MHz

75MHz

55MHz

83MHz

63.4MHz

95MHz

63.4MHz

95MHz

66MHz

100MHz

75MHz

83MHz

55MHz

95MHz

97MHz

100MHz

63.4MHz

66MHz

Note: Use 8ns or faster SDRAM modules (PC100 compliant) when

SDRAM is set to run at the frequency of 95/100 MHz.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Step 6. DRAM Module Installation

This Motherboard supports two strips of 72-pin 5V FPM/EDO

DRAM (SIMM) from 4 to 64 MB and two strips 168-pin 3.3V/5V

Unbuffered DIMM modules from 8 to 256 MB. The Motherboard

requires SIMM modules of at least 70ns access time.

SIMM1

SIMM2

DIMM 2

DIMM1

This Motherboard supports both EDO and SDRAM types of

memory modules.

Note: Do not install EDO type of DIMM modules if you already

use SDRAM in any DIMM bank.

ꢀ MEMORY CONFIGURATION

This Motherboard features 2 x DIMM Banks for 168-pin 3.3V

unbuffered DIMM modules; 2 x SIMM Banks for 72-pin SIMM

modules.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Your board comes with one SIMM Bank (2 modules) and two DIMM

sockets, providing support for up to 512MB of main memory using DIMM

modules from 8MB to 256MB. For 66MHz host bus CPUs use 12ns or

faster DIMM modules; for 83MHz or higher host bus CPUs use 8ns

modules.

Memory Configuration Table

MEMORY

SIMM Bank

Bank 1,2

DIMM Banks

CONFIGURATION

DIMM 1

EDO/SDRAM

DIMM 2

FPM/EDO/BEDO

RAM Type

EDO/SDRAM

Single RAM

Module Size (MB)

4/8/16/32/64

8/16/32/64/128/256 8/16/32/64/128/256

Note: 1. You must install two SIMM modules to complete the SIMM Bank

2. Do not use FPM or EDO type of SIMM/DIMM if you already use SDRAM.

3. Do not install SIMM Bank and DIMM 1 at the same time.

Step 7. IDE Device Installation (HDD, CD-ROM)

This Motherboard offers two primary and secondary IDE device

connectors (IDE1, IDE2.) It can support up to four high-speed HDD

or CD-ROM.

Connect one side of the 40-pin flat cable to the IDE device (HDD or

CD-ROM) and plug the other end to the primary (IDE1) or

secondary (IDE2) directionally keyed IDE connector on the

Motherboard.

This Motherboard can support up to four HDDs.

Step 8. Floppy Drive Installation

The system supports 5 possible floppy drive types: 720 KB, 1.2 MB,

1.44 MB, 2.88 MB, and LS-120. In addition, this Motherboard

supports a 3-mode (720KB/1.25MB/1.44MB) floppy commonly used

in Japan.

Connect one side of the 34-pin flat cable to the floppy drive and

plug the other end to the floppy drive connector on the

Motherboard.

This Motherboard can support up to 2 floppy drives.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Step 9. Front Panel Connections

Power

RST

LED

Keylock

PW2

Turbo

LED

SPK

HDD

LED

Plug the computer case's front panel devices to the corresponding

connectors on the Motherboard.

1. Power LED & KeyLock

Plug the Power LED cable into the 5-pin Keylock connector.

Some systems may feature a KeyLock function with a front panel

switch for enabling or disabling the keyboard. Connect the KeyLock

switch to the 5-pin Keylock connector on the Motherboard.

Please install according to the following pin assignment: pin 1,3 are

for Power LED and pin 4,5 are for Keylock.

2. Reset

Plug the Reset push-button cable into the 2-pin Reset connector on

the Motherboard. Pushing the Reset button on the front panel will

cause the system to restart the boot-up sequence.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

3. Speaker

Attach the 4-pin PC speaker cable from the case to the Speaker

connector on the Motherboard.

4. Turbo LED

Connecting the 2-pin Turbo LED cable to the corresponding Turbo

LED connector will cause the LED to light whenever the system is

in Turbo mode.

The manufacturer has permanently set this Motherboard in Turbo

mode due to most hardware and software compliance to turbo

mode.

5. IDE LED

Attach the 2-pin IDE device LED cable to the corresponding IDE

LED connector on the Motherboard. This will cause the LED to

lighten when an IDE (HDD, CD-ROM) device is active.

6. ATX Power On/Off Switch

Attach the 2-pin momentary type switch to the PWRBT connector

for turning On or Off your ATX power supply.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Step 10. External Peripherals Connections

External devices such as the keyboard, printer, PS/2 mouse,

modem, USB can be connected to the Motherboard. Normally, you

can not plug your devices directly onto the Motherboard, except for

the keyboard that plugs directly into the back panel KB connector.

For other parallel (PRT1) and serial devices (COM1, COM2), first

install the external connectors that come with your Motherboard on

the computer case, then plug the other end of the flat cable to their

respective connectors.

Only after you have fixed and locked the Motherboard and external

connectors to the computer case can you start connecting the

external peripheral devices.

When connecting an external device, use the following figure to

locate and identify which back panel connector to plug the device or

flat cable to.

PS/2 Mouse

Connector

PRT 1

COM1

COM2

USB1

COM2

COM1

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

1. Serial Ports COM1/COM2

External Devices that use the COM ports include serial mice and

modems. The COM port connectors are located on 2 separate

brackets panels, as shown on the figure below. Please plug their

respective 10 pin flat cable connectors into the COM1 and COM 2

serial port connectors on the Motherboard.

The bracket panels should be fixed to one of the slots at the back of

the computer case using a screw, after having finished this you can

plug any serial device into the back panel connectors.

9-pin serial

flat cables (2x)

PS/2 Mouse

Connector

COM 2

USB

PRT 1

COM 1

9-pin male external

serial connector (2x)

FDC

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Parallel Port PRT1

This parallel port is used to connect the printer or other parallel

devices.

Your Motherboard comes with one 25-pin female external parallel

connector with 25-pin flat cable.

Plug the 25-pin end of the flat cable into the PRT1 parallel

connector on the Motherboard, as shown in the figure below, then

fix the bracket to one of the slots at the back of the computer case

using a screw. After having finished this you can plug any parallel

device into the back panel connectors.

25-pin parallel

flat cable

PS/2 Mouse

Connector

PRT 1 COM 2

25-pin female external

parallel connector

USB

COM 1

FDC

AT Keyboard

Plug the keyboard jack directly into the 5-pin female AT keyboard

connector located at the rear panel of the Motherboard.

AT Keyboard

Connector

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

PS/2 Mouse

Attach the mouse cable to the 6-pin male PS/2 mouse connector on

the Motherboard to enable PS/2 mouse function.

PS/2 Mouse

Connector

COM 2

PRT 1

USB

COM 1

Universal Serial Bus (USB)

This Motherboard provides a dual-row 10-pin header (one pin is

empty) to support two USB ports for your additional devices. Attach

the USB cable (Optional) to this header as shown in the diagram

below. The USB cable has two USB ports mounted on a bracket.

PS/2 Mouse

Connector

COM 2

PRT 1

USB

COM 1

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Step 11. Others Connector

1. Wake-On-LAN (WOL)

Attach the 3-pin connector from the LAN card which supports the

Wake-On-LAN (WOL) function to the JP44 connector on the

Motherboard. This WOL function lets users wake up the connected

computer through the LAN card.

Please install according to the following pin assignment:

Wake-On-LAN

JP44 Pin Assignment

GND

5VSB

MP_Wakeup

1 2 3

2. Infrared (IR)

Plug the 5-pin infrared device cable to the IR connector. This will

enable the infrared transfer function. This Motherboard meets both

the ASKIR and HPSIR specifications.

Please install according to the following pin assignment:

Serial Infrared (SIR) Connector

SIR Pin Assignment

VCC

IRRX GND

IRTX

1 3 2 4 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Step 12. CPU Cooling Fan Installation

After you have seated the CPU cooling fan properly on the

processor, attach the 3-pin fan cable to the JP12 connector on the

Motherboard.

To avoid damage to the system, install according to the following

pin assignment:

CPU Cooling Fan: JP12

GND

12V

Step 13. ATX Power Supply

Plug the connector from the power directly into the 20-pin male ATX

PW connector on the Motherboard, as shown in the following figure.

ATX Power

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Warning: Follow these precautions to preserve your

Motherboard from any remnant currents when connecting

to ATX power supply:

Turn off the power supply and unplug the power cord

of the ATX power supply before connecting to ATX PW

connector.

The Motherboard requires a power supply with at least 200 Watts

and a "power good" signal. Make sure the ATX power supply can

take at least 100 mA load on the 5V Standby lead (5VSB) to meet

the standard ATX specification.

* Note: If you use the Wake-On-LAN (WOL) function, make sure

the ATX power supply can support at least 720 mA on the 5V

Standby lead (5VSB).

Please install the ATX power according to the following pin

assignment:

ATX Power

12V

5VSB

PW-OK

GND

-5V

GND

PS-ON

GND

-12V

3.3V

ꢁ Pay special care to the directionality.

GND

3.3V

Step 14. AT Power Supply

If you are using AT power, plug the dual 6-pin headers from the

power directly into the 12-pin male AT Power connector on the

Motherboard. Make sure the black leads of the 6-pin AT power

headers are in the center.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Do NOT use an ATX and AT powersupply at the

Warning:_{same time. Use only ONE type of power supply.}

Step 15. CPU frequency of 83MHz Setting (JP8)

This jumper is used in the CPU frequency selection. It is set to 1-2 for a CPU

frequency of 83 MHz. For all other CPU frequencies it has to be set to 2-3.

All other CPU

Frequencies

CPU frequency

83MHz

pin2-3

JP8 Setting Close pin1-2

Step 16. Select the CPU Burst Mode (JP22)

There are two types of CPU burst modes according to manufacturer

design:

ꢁ Interleave Burst (CPU: Intel P54C/P55C, AMD

K5/K6/K6-2/K6-III, IDT X86 CPU, Rise mP6)

ꢁ Linear Burst

(CPU: Cyrix 6x86/L/MX/MII)

Interleave

Linear

Intel^®P54C/P55C

CPU Burst

Mode

Cyrix™ 6x86/L/MX/MII

AMD™ K5/K6/K6-2/K6-III,

IDT X86 CPU, Rise mP6

When using

JP22 Setting Intel or AMD

Cyrix type of

CPU.

CPUs.

If you are using a Cyrix™ 6x86/L/MX/M II series CPU, set the burst

mode to Linear by shorting pin 1-2 on jumper JP22, and follow the

following steps to select the correct Linear burst mode in BIOS:

1. During the boot-up initial sequence, press the [Delete] key

to enter the BIOS setup menu.

2. Select the [CHIPSET FEATURES SETUP] section in BIOS.

3. In the [CHIPSET FEATURES SETUP] sub-menu, set the

[Linear Burst] field to [Enabled].

4. Press [Esc] to return to the BIOS main menu.

5. Then choose [Save & Exit Setup] to re-boot your computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

CMOS Clearing (JP5)

After you have turned off your computer, clear the CMOS memory

by momentarily shorting pins 2-3 on jumper JP5, for a few seconds.

Then restore JP5 to the initial 1-2 jumper setting in order to recover

and retain the default settings.

CMOS Clearing

Clear CMOS Data

Retain CMOS Data

Short pin 2-3 for

Short pin 1-2

to retain new

settings

JP5 Setting

a few seconds

to clear the

CMOS

Note: You must unplug the ATX power cable from the ATX power

connector when performing the CMOS Clear operation.

Step 17. MULTI I/O ADDRESSES

Default settings for multi-I/O addresses are as follows:

Port

I/O Address

IRQ

Status

ECP + EPP

LPT1

COM1

COM2

378H

3F8H

2F8H

Warning: If a default I/O address conflicts with other I/O

cards such as sound card, you must change one of the I/O

addresses to remedy to this address conflict. (I/O addresses

can be adjusted from the BIOS Setup Utility)

Step 18. CACHE CONFIGURATION

This Motherboard has a built-in 512KB/1MB Level 2 Pipelined Burst

cache onboard to improve the system performance.

The cache size and RAM locations are specified as follows:

Cacheable

Cache Size

1 MB

Cache RAM

TAG RAM

Range

64K x 64

on U23,U16

64K x 64

on U23

32K x 8

on U18

32K x 8

on U18

WT: 256 MB

WB: 128MB

WT: 128 MB

WB: 64 MB

512 KB

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Setup

SY-5EHM/5EH5 V1.3

Step 19. Power On

You have now completed the hardware installation of your

Motherboard successfully.

1. Turn the power on

2. To enter the BIOS Setup Utility, press the <DEL> key while the

system is performing the diagnostic checks,

Note: If you have failed to enter the BIOS, wait until the boot

up sequence is completed. Then push the RESET button

and press <DEL> key again at the beginning of boot-up,

during diagnostic checks.

Repeat this operation until you get the following screen.

3. The BIOS Setup screen appears:

ROM PCI/ISA BIOS

CMOS SETUP UTILITY

AWARD SOFTWARE, INC.

STANDARD CMOS SETUP

BIOS FEATURES SETUP

CHIPSET FEATURES SETUP

POWER MANAGEMENT SETUP

PNP/PCI CONFIGURATION

LOAD SETUP DEFAULTS

LOAD BIOS DEFAULTS

INTEGRATED PERIPHERALS

SUPERVISOR PASSWORD

USER PASSWORD

IDE HDD AUTO DETECTION

SAVE & EXIT SETUP

EXIT WITHOUT SAVING

Esc : Quit

↑ ↓ → ← : Select Item

F10 : Save & Exit Setup

(Shift) F2 : Change Color

Time, Date, Hard Disk Type…

You are now ready to configure your system with the BIOS setup

program. Go to Chapter 3: BIOS SETUP

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Chapter 3

BIOS SETUP UTILITY

This Motherboard's BIOS setup program uses the ROM PCI/ISA BIOS

program from Award Software Inc.

To enter the Award BIOS program's Main Menu:

1. Turn on or reboot the system.

2. After the diagnostic checks, press the [Del] key to enter the Award

BIOS Setup Utility.

ROM PCI/ISA BIOS

CMOS SETUP UTILITY

AWARD SOFTWARE, INC.

STANDARD CMOS SETUP

BIOS FEATURES SETUP

CHIPSET FEATURES SETUP

POWER MANAGEMENT SETUP

PNP/PCI CONFIGURATION

LOAD SETUP DEFAULTS

LOAD BIOS DEFAULTS

INTEGRATED PERIPHERALS

SUPERVISOR PASSWORD

USER PASSWORD

IDE HDD AUTO DETECTION

SAVE & EXIT SETUP

EXIT WITHOUT SAVING

Esc : Quit

↑ ↓ → ← : Select Item

F10 : Save & Exit Setup

(Shift) F2 : Change Color

Time, Date, Hard Disk Type…

Selecting items

ꢀ Use the arrow keys to move between items and select fields.

ꢀ From the Main Menu press arrow keys to enter the selected

submenu.

Modifying selected items

ꢀ Use the [Up]/[Down] keys to modify values within the selected

fields. Some fields let you enter values directly.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Hot Keys: Function keys give you access to a group of commands

throughout the BIOS utility.

Function

Command

Description

Help

Gives the list of options available for each item.

Shift F2

Color

Change the color of the display window.

Old values

Restore the old values. These are the values that

the user started the current session with.

Loads all options with the BIOS Setup default

values.

Load BIOS

Defaults

Load Setup

Defaults

Save & Exit

Setup

Loads all options with the Power-On default values.

Saves your changes and reboots the system.

F10

[Esc]

Quit

Lets you return at anytime and from any location to

the Main Menu.

SAVE AND EXIT SETUP

Select the [SAVE & EXIT SETUP] option from the Main Menu to save

data to CMOS and exit the setup utility. This option saves all your changes

and causes the system to reboot.

I / I S

I O

I L I T

I N

Type [Y] to save the

I N

I P

I O

I S

changes and exit or [N] to

return to the Main Menu

and keep current values.

I P

/ P

I D

I O

SAVE to CMOS and EXIT (Y/N)? _

I G

I O

I T

I N

I O

i t

↑

↓

→

←

l e

I t e

i t

( S

i f t )

l o

i m

t e

r d

i s

…

EXIT WITHOUT SAVING

Selecting the [EXIT WITHOUT SAVING] option allows you to abandon

all data and exit setup, therefore ignoring all your changes.

I / I S

I O

I L I T

I N

Type [Y] to abandon

I N

I P

I O

I S

I P

changes and exit or [N] to

return to the Main Menu

and keep current values.

I D

I O

/ P

I G

I O

I T

Quit Without Saving (Y/N)? _

I T

I N

I O

i t

↑

↓

→

←

I t e

i t

t u

( S

if t )

l o

t e

r d

i s

…

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-1 STANDARD CMOS SETUP

Select the [STANDARD CMOS SETUP] option from the Main Menu and

press [Enter] key.

ROM PCI/ISA BIOS

STANDARD CMOS SETUP

AWARD SOFTWARE, INC.

Date (mm:dd:yy)

Time (hh:mm:ss)

: Fri, May 29 1998

: 9 : 42 : 43

HARD DISKS

TYPE

AUTO

SIZE

CYLS HEAD PRECOMP LANDZ SECTOR MODE

Primary Master

Primary Slave

Secondary Master

Secondary Slave

AUTO

- - - -

None

Drive A : 1.44M, 3.5 in.

Drive B : None

Floppy 3 Mode Support : Disabled

Base Memory:

Extended Memory:

Other Memory:

640K

3328K

128K

Video

Halt On

EGA/VGA

All Errors

Total Memory:

4096K

Esc : Quit

F1 : Help

: Select Item

PU/PD/+/-

: Modify

: Toggle Calendar

↑ ↓ → ←

(Shift) F2

: Change Color

This screen allows you to modify the basic CMOS settings.

After you have completed the changes, press [Esc] key to return to the

Main Menu.

3-1.1 Date & Time

Display

Setting

Please Note

Date mm/dd/yyyy Type the current date You can also the

PUp/PDn keys to

toggle

Time hh:mm:ss

Type the current time 24-hour clock format

3:15 PM is displayed

as 15:15:00

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-1.2 Hard Disks Type & Mode

Choose the type and mode for the hard disks that you have already

installed.

Primary

Setting Description

Note

(Secondary)

Master & Slave

Type

Auto

BIOS detects hard disk type

Default

automatically.

1-47

User

Selects standard hard disk type.

User defines the type of hard

disk.

Mode

Auto

BIOS detects hard disk mode Default

automatically.

Normal Normal IDE hard disk

LBA Enhanced IDE hard disk

<528MB

>528MB

Large Large IDE hard disk (for certain

hard disk)

Note: If you have any questions on your hard disk type or

mode, ask your hard disk provider or previous user for details.

3-1.3 Floppy Drives

Floppy Drives Setting

Description

Note

Drives A & B

360KB, 5.25 in.

1.2MB, 5.25 in.

720KB, 3.5 in.

1.44MB, 3.5 in.

2.88MB, 3.5 in.

None

Default

Not installed

Floppy 3-Mode Disabled

Supports 3-mode Special disk

floppy diskette: drive commonly

740KB/1.25MB/1. used in Japan

44MB on selected

Support

Drive A

Drive B

Both

disk drive.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-1.4 Video

Select the video mode: EGA/VGA (Default), CGA 40, CGA 80, Mono

(Monochrome).

3-1.5 Halt On

When the BIOS detects system errors, this function will stop the system.

Select which type of error will cause the system halt: All Errors (Default),

No Errors, All But Diskette, All But Keyboard, All But Disk/Key.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-2 BIOS FEATURES SETUP

Select the [BIOS FEATURES SETUP] option from the Main Menu and

press [Enter] key.

ROM PCI/ISA BIOS

BIOS FEATURES SETUP

AWARD SOFTWARE, INC.

Virus Warning

CPU Internal Cache

External Cache

Quick Power On Self Test

Boot Sequence

Swap Floppy Drive

: Disabled

: Enabled

: A, C, SCSI

: Disabled

: On

Video

BIOS Shadow : Enabled

C8000-CBFFF Shadow : Disabled

CC000-CFFFF Shadow : Disabled

D0000-D3FFF Shadow : Disabled

D4000-D7FFF Shadow : Disabled

D8000-DBFFF Shadow : Disabled

DC000-DFFFF Shadow : Disabled

Boot Up NumLock Status

Gate A20 Option

: Fast

Memory Parity /ECC Check

Typematic Rate Setting

Typematic Rate (Chars/Sec)

Typematic Delay (Msec)

Security Option

IDE Second Channel Control : Enable

PCI/VGA Palette Snoop : Disabled

OS Select For DRAM > 64MB : Non-OS2

Report No FDD For WIN 95 : No

: Enabled

: Disabled

: 6

: 250

: Setup

ESC : Quit

↑ ↓ → ← : Select Item

PU/PD/+/- : Modify

: Help

: Old Values (Shift) F2 : Color

: Load BIOS Defaults

: Load Setup Defaults

After you have completed the changes, press [Esc] key and follow the

instructions on your screen to save your settings or exit without saving.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-2.1 Virus Warning

Setting

Virus Warning Disabled

Description

Note

Default

Enabled Enable this option to protect

the boot sectors and

partition tables of your hard

disk. Any attempt to write to

them will the system to halt

and display a warning

message.

3-2.2 Cache Memory Options

Setting Description

CPU Internal Cache Disabled

Note

Enabled Enables the CPU's

internal cache.

Default

External Cache

Disabled

Enabled Enables the external

memory.

Default

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-2.3 System Boot Control Settings

System Boot

Setting

Description

Note

Control Settings

Quick Power On Disabled

Self Test

Enabled

Provides a fast POTS at Default

boot-up.

Boot Sequence A, C, SCSI

Choose the boot

sequence adapted to

your needs, for example:

ꢀ [A, C, SCSI] means

the BIOS will look for an

operating system first in

drive A, then in drive C,

and eventually in SCSI

device.

C, A, SCSI

C, CD-ROM, A

CD-ROM, C, A

D, A, SCSI

E, A, SCSI

F, A, SCSI

SCSI, A, C

SCSI, C, A

C only

LS/ZIP, C

Swap Floppy

Drive

Disabled

Enabled

Default

Changes the sequence

of A and B drives.

Boot Up

NumLock Status

Off

Puts numeric keypad in Default

NumLock mode at

boot-up.

Puts numeric keypad in

arrow key mode at

boot-up.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

System Boot Control Settings (continued)

System Boot

Setting

Description

Note

Control Settings

Gate A20 Option Normal

Fast

Allows RAM access

above 1MB using the

fast gate A20 line.

Default

Memory Parity Enabled

Check/ ECC

Check

This allows to perform a Default

redundancy check on the

parity bit in the data

strings. This method is

used for error detection

when the parity is not

found.

Disabled

3-2.4 Typematic Settings

Typematic

Settings

Setting

Description

Note

Typematic

Rate Setting

Disabled

Enabled

Default

Enables to adjust the

keystroke repeat rate.

The following [Typematic Rate] and [Typematic Delay] fields are

active only if [Typematic Rate Setting] is set to [Enabled]

6 (Char/sec)

8 (Char/sec)

10 (Char/sec)

12 (Char/sec)

15 (Char/sec)

20 (Char/sec)

24 (Char/sec)

30 (Char/sec)

Typematic Rate

(Chars/Sec)

Choose the rate at which Default

a character is repeated

when holding down a

key.

250 (msec)

500 (msec)

750 (msec)

1000 (msec)

Typematic Delay

(Msec)

Choose how long after Default

you press a key down

the character begins

repeating.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

3-2.5 Other Control Options

Other Control Setting

Options

Description

Security

Option

Setup

Use this feature to prevent

Default

Unauthorized system boot-up

or use of BIOS Setup.

“Setup”, If a password is set,

the password prompt only

appears if you attempt to

enter the Setup program.

Each time the system is

booted the password prompt

appears.

System

IDE Second

Channel

Control

Disabled Turn off the on-board IDE.

Enabled Use a PS/2 mouse.

Default

PCI/VGA

Disabled

Palette Snoop

Enabled

The color of the monitor may be altered

when using an MPEG card. Enable this

option to restore the monitor's normal

color.

OS Select for OS2

DRAM>64MB

When using an OS2

operating system.

Non-OS2 When using another,

non-OS2 operating system.

Default

Report No

FDD For WIN

Windows will reserve INT 6 Default

for your FDD, whether it is

Disabled or not.

Yes

Windows will release IRQ line

6 (normally used by the

Floppy Disk Drive) after you

disable you on-board FDD

and set this field to [Yes].

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

Other Control Options (Continued)

Other Control Setting

Options

Description

Video or

Adapter BIOS

Shadow

Disabled

Enabled

Default

The BIOS is shadowed in a 16K

segment if it is enabled and if it has

BIOS present.

These 16 segments can be shadowed

from ROM to RAM. BIOS shadow copies

BIOS code from slower ROM to faster

RAM.

BIOS can then execute from RAM.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-3 CHIPSET FEATURES SETUP

Caution: Change these settings only if you are already

familiar with the Chipset.

The [CHIPSET FEATURES SETUP] option changes the values of the

chipset registers. These registers control the system options in the

computer.

ROM PCI/ISA BIOS

CHIPSET FEATURES SETUP

AWARD SOFTWARE, INC.

Bank 0/1 DRAM Timing

Bank 2/3 DRAM Timing

Bank 4/5 DRMA Timing

DRAM Read Pipeline

: FP/EDO/60ns

: Enabled

Cache Rd+ CPU Wt Pipeline : Disabled

Linear Burst

: Disabled

Video BIOS Cacheable

System BIOS Cacheable

: Enabled

Memory Hole At 15Mb Addr. : Disabled

AGP Aperture Size

AGP –2x Mode

On Chip USB

USB Keyboard Support

Spread Spectrum Modulated : Disabled

: 64M

: Disabled

: Enable

: Disabled

ESC : Quit

↑ ↓ → ← : Select Item

PU/PD/+/- : Modify

: Help

: Old Values (Shift) F2 : Color

: Load BIOS Defaults

: Load Setup Defaults

After you have completed the changes, press [Esc] and follow the

instructions on your screen to save your settings or exit without saving.

The following table describes each field in the CHIPSET FEATURES

SETUP Menu and how to configure each parameter.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

CHIPSET FEATURES SETUP

CHIPSET

Setting

Description

FEATURES

Bank 0/1 DRAM FP/EDO Use the default setting

Default

Timing

70ns

Bank 2/3 DRAM

Timing

Bank 4/5 DRAM

Timing

Normal

Medium

Fast,

Choose DRAM Timing.

Turbo

DRAM Read

Pipeline

Disabled

Enabled Enhances system

performance

Default

Cache Rd+CPU Disabled

Wt Pipeline

Enabled Enhances system

performance

Default

Linear Burst

Disabled Use the default setting

Enabled Linear mode SRAM support

for Cyrix type of CPU.

Video BIOS

Cacheable

Disabled

Enabled The ROM area A0000-

BFFFF is cacheable.

Default

System BIOS

Cacheable

Disabled

Enabled The ROM area F0000H-

FFFFFH is cacheable

Default

Memory Hole

15Mb Addr.

Disabled Some interface cards will

map their ROM address to

this area.

Enabled

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

CHIPSET FEATURES SETUP (Continued)

CHIPSET

Setting

Description

FEATURES

AGP Aperture

Size

64M

4-256M

AGP could use the DRAM Default

as its video RAM. Choose

the JDRAM size that you

wish to allocate as video

RAM.

AGP-2X Mode

OnChip USB

Disabled

Default

Enabled Enable only if your AGP

card supports 2x mode

(faster)

Disabled

Enabled Enable if you use a separate Default

USB controller card

USB Keyboard

Support

Disabled

Default

Enabled Enabled if you use an USB

Keyboard.

Spread Spectrum Disabled Use the default setting

Modulated

Default

Enabled When using Spread

Spectrum Modulated 1.5%

or 6% for FCC or DOC

testing.

Show the current voltage

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-4 POWER MANAGEMENT SETUP

The [POWER MANAGEMENT SETUP] sets the system's power saving

functions.

ROM PCI/ISA BIOS

POWER MANAGEMENT SETUP

AWARD SOFTWARE, INC.

Primary INTR

IRQ3 (COM2)

IRQ4 (COM1)

IRQ5 (LPT2)

IRQ6 (Floppy Disk)

IRQ7 (LPT1)

IRQ8 (RTC Alarm)

IRQ9 (IRQ2 Redir)

IRQ10 (Reserved)

IRQ11 (Reserved)

IRQ12 (PS/2 Mouse)

IRQ13 (Coprocessor)

IRQ14 (Hard Disk)

IRQ15 (Reserved)

: ON

ACPI function

: Disabled

: User Define

: Yes

: Suspend ->Off

: V/H SYNC+ Blank

: 3

: Primary

: Disabled

: Secondary

: Primary

: Disabled

Power Management

PM Control by APM

Video Off Option

Video Off Method

Modem Use IRQ

Sof-Off by PWR-BTTN : Instant – Off

** PM Timers **

HDD Power Down

Doze Mode

Suspend Mode

** PM Events **

VGA

LPT & COM

HDD & FDD

: Disabled

: OFF

: LPT/COM

: ON

DMA/ master

Modem Ring Resume

RTC Alarm Resume

: OFF

: Disabled

ESC : Quit

↑ ↓ → ← : Select Item

PU/PD/+/- : Modify

: Help

: Old Values (Shift) F2 : Color

: Load BIOS Defaults

: Load Setup Defaults

After you have completed the Power Management Setup, press [Esc] to

return to the Main Menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

3-4.1 Power Management Controls

Power

Setting

Description

Management

Controls

ACPI

function

Disabled

Enabled

Default

Enabled if you use Windows

98 and want to use ACPI

Power

Management

User Define Lets you define the HDD

and system power down

times.

Doze timer Standby timer Suspend timer

Min Saving

Max Saving 20 Sec

40 Min

20 Sec

40 Min

20 Sec

PM Control Yes

by APM

To use Advanced Power

Management (APM) you

Default

must run [power.exe] under

DOS V6.0 or later version.

Video Off

Option

Suspend

->Off

All Modes

->Off

Always On

The monitor will be switched Default

off in suspend mode,

the monitor will be switched

off in all power saving

modes

Video Off

Method

V/H

Selects the method by which Default

SYNC+Blank the monitor is blanked.

Blank screen

DPMS

Supported

Modem Use

IRQ

Assigns an IRQ# to the

modem device.

Default

3-11, NA

Soft-Off by Instant - Off Select the Power Button

PWRBTN

Mode.

Delay 4 Sec

Instant – Off : One push off.

Delay 4 Sec : Push for 4s to

switch off.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

3-4.2 PM Timers

PM Timers

Setting Description

HDD Power Disable

Default

Some older

Down

1-15Min When the set time has

model HDDs

may not support

this advanced

function.

elapsed, BIOS sends a

command to the HDD to

power down. This turns off

the HDD motor.

The following [Doze Mode] field may be configured only if [Power

Management] is set to [User Define]

Doze Mode Disable

10sec- When the set time has

1Hour elapsed, BIOS sends a

Default

System clock

drops to

command to the system 33MHz.

to enter Doze Mode.

The following [Suspend Mode] field may be configured only if

[Power Management] is set to [User Define]

Suspend

Mode

Disable

Default

Only an

SL-Enhanced (or

SMI) CPU can

enter this mode.

10sec- In Suspend mode, the

1Hour

CPU stops completely (no

instructions are

executed.)

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

3-4.3 PM Events

PM Events

Setting

Description

VGA

Enabled the power

managemnet.

OFF

Default

LPT & COM LPT/COM Enabled the power

management timer.

COM

LPT

NONE

HDD & FDD ON

Enabled the power

Default

management timers when the

event is detected on the Hard

Disk Drive and Floppy Disk

Drive device.

OFF

DMA/master ON

The system will not have SIM

signal until the master is

finished while the master is

working.

OFF

Default

Modem Ring Disabled

Resume

Only work when the computer Default

is powered on. The system will

resume active when modem is

ringing.

Enabled

The system will not resume

when modem is ringing.

RTC Alarm

Resume

Disabled

Enabled

The system ignores the alarm. Default

Set alarm to wake up the

system either by the date (1-31)

or time (hh:mm:ss), and if the

date is set to 0, it means that

the system will wake up by the

alarm everyday.

Primary INTR ON

Use the default setting.

Default

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

IRQ3(COM2), IRQ4(COM1),

IRQ5(LPT2), IRQ6(Floppy

Disk), IRQ7(LPT1), IRQ12(PS/2

mouse), IRQ13(Coprocessor),

IRQ14(HardDsik)

PM Events (Continued)

PM Events

IRQ#

Setting

Primary

Description

Secondary IRQ9(IRQ2 Redir),

IRQ10( Reserved),

IRQ11(Reserved)

Disabled

IRQ8 (RTC Alarm), IRQ15

(Reserved)

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-5 PNP/PCI CONFIGURATION SETUP

This option sets the Motherboard's PCI Slots.

ROM PCI/ISA BIOS

PNP/PCI CONFIGURATION SETUP

AWARD SOFTWARE, INC.

: No

: Manual

CPU to PCI Write Buffer

PCI Master Broken Timer : Disabled

: Enabled

PNP OS Installed

Resources Controlled By

ACPI I/O Device Node

IRQ-3 assigned to

IRQ-4 assigned to

IRQ-5 assigned to

IRQ-7 assigned to

IRQ-9 assigned to

IRQ-10 assigned to

IRQ-11 assigned to

IRQ-12 assigned to

IRQ-14 assigned to

IRQ-15 assigned to

DMA-0 assigned to

DMA-1 assigned to

DMA-3 assigned to

DMA-5 assigned to

DMA-6 assigned to

DMA-7 assigned to

: Disabled

PCI IRQ Actived By

Assign IRQ For USB

Assign IRQ For VGA

Assign IRQ For ACPI

: Level

: Legacy ISA

: PCI/ISA PnP

: Enabled

: IRQ10

ESC : Quit

↑ ↓ → ← : Select Item

PU/PD/+/- : Modify

: Help

: Old Values (Shift) F2 : Color

: Load BIOS Defaults

: Load Setup Defaults

Note: Starred (*) items will disappear when the [Resources

Controlled By] option is set to [Auto].

After you have completed the PCI Slot Configuration, press [Esc] and

follow the instructions on your screen to save your settings or exit without

saving.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

3-5.1 PNP/PCI Configuration Controls

PNP/PCI

Controls

Setting Description

PNP OS

Installed

Yes

Use the default setting

Disabled

Resources

Controlled By

Manual BIOS does not manage PCI/ISA

PnP card IRQ assignment.

Requires to assign IRQ-# and DMA-# to PCI

or ISA PnP manually.

IRQ-3,4,5,7,9,10,11,12,14,15 assigned to: _

DMA-0,1,3,5,6,7 assigned to: _

Auto

The Plug-and-Play BIOS Recommended

auto manages PCI/ISA

PnP card IRQ assignment

automatically.

Reset

Configuration

Data

Disabled Retain PnP configuration Default

data in BIOS.

Enabled Reset PnP configuration

data in BIOS.

ACPI I/O

Device Node

Disabled Use the default setting

Enabled

Default

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

Note

3-5.2 PNP/PCI Configuration Setup

PNP/PCI

Setup

Setting

Description

If [Resources Controlled By] is set to [Manual]

IRQ-3,4,5,7,9,10,

11,12,14,15

IRQ-# and

DMA-#

assigned to:

PCI/ISA PnP Choose IRQ-# and

DMA-# assigned to

PCI/ISA PnP card.

DMA-0,1,3,5,6,7

IRQ-3,4,5,7,9,10,

11,12,14,15

Legacy ISA Choose IRQ-# and

DMA-# assigned to

DMA-0,1,3,5,6,7

Legacy ISA card.

CPU to PCI

write Buffer

Disabled

Enabled

Enable buffering of Default

CPU writes to the

PCI bus, the CPU

will not have to wait.

PCI Master

Broken Timer

Disabled

Enabled

Default

Enable to allow for

slow PCI masters.

Assign IRQ

For USB

Disabled

Enabled

Enable RSB IRQ

Default

Assign IRQ

For VGA

Disabled

Enabled

Enable if your VGA Default

card needs an

interrupt.

Assign IRQ

For ACPI

IRQ10

IRQ11

IRQ9

If you enable ACPI Default

on your system, set

this item to a free

interrupt for ACPI to

use.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-6 LOAD SETUP DEFAULTS

Select the [LOAD SETUP DEFAULTS] option from the Main Menu to

load the system values you have previously saved. This option is

recommended if you need to reset the system setup and to retrieve the old

values.

R O M P C I/IS A B IO S

C M O S S E T U P U T IL IT Y

Type [Y] to use the Setup

A W A R D S O F T W A R E , IN C .

S T A N D A R D C M O S S E T U P

B IO S F E A T U R E S S E T U P

IN T E G R A T E D P E R IP H E R A L S

S U P E R V IS O R P A S S W O R D

U S E R P A S S W O R D

Defaults followed by [Enter]

or otherwise [N] to return

to the Main Menu and

keep current values.

C H IP S E T F E A T U R E S S E T U P

P O W E R M A N A G E M E N T S E T U P

ID E H D D A U T O D E T E C T IO N

L o a d S E T U P D e fa u lts (Y /N )? _

P N P /P C I C O N F IG U R A T IO N

L O A D S E T U P D E F A U LT S

L O A D B IO S D E F A U LT S

S A V E

E X IT

E X IT S E T U P

IT H O U T S A V IN G

E s c

F 1 0

Q u it

↑

↓

→

←

S e le c t Ite m

S a v e

E x it S e tu p

(S h if t) F 2

C h a n g e C o lo r

T im e , D a te , H a rd D is k T y p e …

3-7 LOAD BIOS DEFAULTS

Select the [LOAD BIOS DEFAULTS] option from the Main Menu to

load the system default values. BIOS Defaults values are adjusted

to yield high performance.

R O M P C I/IS A B IO S

C M O S S E T U P U T IL IT Y

Type [Y] to use the Setup

A W A R D S O F T W A R E , IN C .

S TA N D A R D C M O S S E T U P

B IO S F E A T U R E S S E T U P

IN T E G R A T E D P E R IP H E R A L S

S U P E R V IS O R P A S S W O R D

U S E R P A S S W O R D

Defaults followed by [Enter]

or otherwise [N] to return

to the Main Menu and

keep current values.

C H IP S E T F E A T U R E S S E T U P

P O W E R M A N A G E M E N T S E T U P

ID E H D D A U T O D E T E C T IO N

Load BIOS Defaults (Y/N)? _

P N P /P C I C O N F IG U R A T IO N

L O A D S E T U P D E F A U LT S

L O A D B IO S D E F A U LT S

S A V E

E X IT

E X IT S E T U P

IT H O U T S A V IN G

E s c

F 1 0

Q u it

↑

↓

→

←

S e le c t Ite m

S a v e

E x it S e tu p

(S h if t) F 2

C h a n g e C o lo r

T im e , D a te , H a rd D is k T y p e …

Warning: If you run into any problems after loading BIOS

DEFAULTS, please load the SETUP DEFAULTS for stable

performance.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-8 INTEGRATED PERIPHERALS

Caution: Change these settings only if you are already

familiar with the Chipset.

The [INTEGRATED PERIPHERALS] option changes the values of the

chipset registers. These registers control the system options in the

computer.

The following screen shows default settings.

ROM PCI/ISA BIOS

INTEGRATED PERIPHERALS

AWARD SOFTWARE, INC.

OnChip IDE First Channel

: Enabled

Onboard Parallel Port

Parallel Port Mode

ECP Mode Use DMA

Parallel Port EPP Type

: 378

: Normal

: 3

OnChip IDE Second Channel : Enabled

: Enabled

: Auto

IDE Prefetch Mode

IDE HDD Block Mode

IDE Primary Master PIO

IDE Primary Slave PIO

IDE Secondary Master PIO

IDE Secondary Slave PIO

IDE Primary Master UDMA

IDE Primary Slave UDMA

: EPP1.9

: Auto

: PCI Slot

IDE Secondary Master UDMA

IDE Secondary Slave UDMA

Init Display First

ESC : Quit

↑ ↓ → ← : Select Item

: Help

PU/PD/+/- : Modify

: Enabled

: 3F8/IRQ4

: 2F8/IRQ3

: Standard

: Old Values (Shift) F2 : Color

: Load BIOS Defaults

: Load Setup Defaults

Onboard FDC Controller

Onboard UART 1

Onboard UART 2

Onboard UART 2 Mode

The following tables describe each field in the INTEGRATED

PERIPHERALS Menu and provide instructions on how to configure the

IDE controls, FDC controls, and the onboard serial and parallel ports.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-8.1 IDE Device Controls

IDE Controls

Setting

Description

Note

Onchip IDE Primary Disabled

Use the On-board IDE

Channel

Enabled

Default

Onchip IDE Second Disabled

Turn off the On-board

IDE Channel

Channel

Enabled

IDE Prefetch Mode

Disabled

Enabled

Enable to enhance

system performance.

IDE HDD Block Mode Disabled

Enabled

Invokes multi-sector

transfer instead of one

sector per transfer. Not

all HDDs support this

function.

Default

The following fields may be configured only if [Internal PCI/IDE] is

set to [Both], [Primary], or [Secondary].

IDE

ꢁ

Mode 0-4 0 is the slowest speed

4 is the fastest speed

Primary Master PIO

Primary Slave PIO

Secondary Master PIO

Auto

For better

Default

ꢁ

performance and

stability, we suggest

you use the Auto

setting to set the HDD

control timing.

ꢁ

Secondary Slave PIO

IDE

Disabled

Auto

ꢁPrimary Master UDMA

ꢁPrimary Slave UDMA

ꢁSecondary Master UDMA

ꢁSecondary Slave UDMA

Select Auto to enable Default

Ultra DMA Mode

support.

The following field may be configured only if [Internal PCI/IDE] is

set to [Both], [Primary], or [Secondary].

Init Display First

PCI Slot

Select the VGA card Default

that connects to the

primary monitor.

AGP

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-8.2 FDC Controls

FDC Controls

Setting

Description

Note

Onboard FDC

controller

Disabled

Turn off the on-board

floppy controller

Enabled

Use the on-board

floppy controller

Default

3-8.3 Onboard Serial Ports

Onboard Serial

Ports

Setting

Description

Note

Onboard UART 1

Onboard UART 2

Disabled

3F8/IRQ4

Choose serial port 1 & Default

2's I/O address.

Do not set port 1 & 2

to the same address

except for Disabled or

Auto.

(port 1)

Default

(port 2)

2F8/IRQ3

3E8/IRQ4

2E8/IRQ3

Auto

Onboard UART 2

Mode

Standard

HPSIR

Supports a serial

infrared IrDA.

Supports HP serial

infrared interface

format.

Default

ASKIR

Supports a Sharp

serial interface format.

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-8.4 Onboard Parallel Ports

IR Pins Controls

Setting

Description

Note

IR Duplex mode

Half

Full

Select the IR mode

your IR module

supports

Default

Use IR Pins

IR-RX2TX2

IR-RX TX

Default

3-8.5 Onboard Parallel Ports

Onboard Parallel

Ports

Setting

Description

Note

Onboard Parallel

Port

378

Disabled

3BC

Choose the printer I/O Default

address.

278

Parallel Port Mode ECP + EPP The mode depends on

your external device

that connects to this

port.

Normal

EPP

ECP

Default

If [Parallel Port Mode] is set to [ECP] or [ECP+EPP].

ECP Mode Use DMA

Choose DMA3

Choose DMA1

If [Parallel Port Mode] is set to [EPP] or [ECP+EPP].

Parallel Port EPP

Type (EPP Version)

EPP1.9

EPP1.7

Choose EPP Ver. 1.9 Default

Choose EPP Ver. 1.7

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-9 SUPERVISOR PASSWORD

Based on the setting you have made in the [Security Option] of the [BIOS

FEATURES SETUP] section, the password prevents access to the system

or the setup program by unauthorized users. Follow this procedure to set a

new password or disable the password:

1. Choose [BIOS FEATURES SETUP] in the Main Menu and

press [Enter]. Select the [Security Options] item and set the

field to:

a. [System]: The password is required every time the system

is booted. This means only a person who knows the

password can use this computer.

b. [Setup]: The password is required only when you attempt

to enter the BIOS Setup program.

2. Choose [SUPERVISOR PASSWORD] from the Main Menu

and press [Enter]. The following prompt appear:

Enter Password:

Warning: If you forget or lose the password, the only way

to access the system is to set jumper JP5 to clear the

CMOS RAM. All setup information is lost and you must run

the BIOS setup program again.

Note: If you do not wish to use the password function,

press [Enter] directly and the following message appears:

Password Disabled!!

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3. Enter your new password and press [Enter]. The following

message appears, prompting to confirm the new password:

Confirm Password:

4. Re-enter your password and then press [Enter] to exit to the

Main Menu.

This diagram outlines the password selection procedure:

Type the Password

Press <Enter> without

Type the Password

ROM PCI/ISA BIOS

Press:

↔

and Press: <Enter>

entering the password

CMOS SETUP UTILITY

Press:

Without entering password

↔

AWARD SOFTWARE, INC.

STANDARD CMOS SETUP

INTEGRATED PERIPHERALS

SUPERVISOR PASSWORD

Enter Password:

BIOS FEATURES SETUP

CHIPSET FEATURES SETUP

USER PASSWORD

Enter Password:

Password Disabled!!

∗∗∗∗∗

POWER MANAGEMENT SETUP

PNP/PCI CONFIGURATION

IDE HDD AUTO DETECTION

SAVE & EXIT SETUP

Confirm Password:

∗∗∗∗∗

LOAD SETUP DEFAULTS

LOAD BIOS DEFAULTS

EXIT WITHOUT SAVING

After you confirm the password,

After you confirm the

Esc : Quit

↑ ↓ → ← : Select Item

press <Esc> to exit

F10 : Save & Exit Setup

password, pre^(Sss^{hift) F2}to^{: C}e^hx^aiⁿt^{ge Color}

Time, Date, Hard Disk Type…

3-10 USER PASSWORD

When the user password option is on, you are not allowed to change any

setting in the [CMOS SETUP UTILITY] except for changing the user's

password.

The password setting procedure is similar to that for the [SUPERVISOR

PASSWORD] (Refer to section 3-9).

Download from Www.Somanuals.com. All Manuals Search And Download.

BIOS Setup Utility

SY-5EHM/5EH5 V1.3

3-11 IDE HDD AUTO DETECTION

This Main Menu function automatically detects the hard disk type and

configures the STANDARD CMOS SETUP accordingly.

ROM PCI/ISA BIOS

CMOS SETUP UTILITY

AWARD SOFTWARE, INC.

HARD DISKS

Primary Master

TYPE SIZE CYLS HEAD PRECOMP

LANDZ

SECTOR MODE

Select Primary Master Option (N=Skip)

SIZE CYLS HEAD PRECOMP LANDZ SECTOR

1707

OPTIONS

MODE

63 LBA

2(Y)

827

3309

827

65535

3308

1707

63 NORMAL

63 LARGE

Note: Some Oses( SCO-UNIX Before v5.0) must use “NORMAL” for installation

ESC : Skip

Note: This function is only valid for IDE type of hard disk

drives.

Download from Www.Somanuals.com. All Manuals Search And Download.

Drivers Installation

SY-5EHM/5EH5 V1.3

Chapter 4

DRIVERS INSTALLATION

Your SY-5EHM/5EH5 V1.3 Motherboard comes with a CD-ROM labeled

"SOYO CD." The SOYO CD contains (1) the user's manual file for your

new Motherboard, (2) the drivers software available for installation, and (3)

a database in HTML format with information on SOYO Motherboards and

other products.

Step 1. Insert the SOYO CD into the CD-ROM drive

The SOYO CD will auto-run, and the SOYO CD Start Up Menu will be as

shown. If you use Windows NT, the SOYO-CD will not detect your

motherboard type. In that case the following dialog will pop up, please

choose your motherboard and press OK. Now the SOYO-CD Start Up Menu

will be shown.

Please Select Your Board

LI-7000

7IWB

7IWA-F

7IWA-F V1.0

6IWM/L

6IWM

7IWB V1.0

7IWM

6IWA

7IWM/L V1

Cancel

(SOYO CD Start Up Program Menu)

If you use Windows 95/98/ME, the SOYO CD Start Up Program

automatically detects which SOYO Motherboard you own and displays the

corresponding model name.

Download from Www.Somanuals.com. All Manuals Search And Download.

Drivers Installation

SY-5EHM/5EH5 V1.3

The user's manual files included on the SOYO CD are in PDF (Postscript

Document) format. In order to read a PDF file, the appropriate Acrobat

Reader software must be installed in your system.

Note: The Start Up program automatically detects if the Acrobat Reader

utility is already present in your system, and otherwise prompts you on

whether or not you want to install it. You must install the Acrobat Reader

utility to be able to read the user's manual file. Follow the instructions on

your screen during installation, then once the installation is completed,

restart your system and re-run the SOYO CD.

Step 2. Install Drivers and Utilities

The following describes the best way of installing Windows 95/98/ME on your

5EHM/5EH5 V1.3 Motherboard:

ꢁ

The following BIOS default settings should not be changed:

1. The ‘OnChip USB Controller’ item under ‘Chipset features Setup’ is set to enabled.

2. The ‘USB Assigned IRQ’ item under ‘PnP/PCI Configuration is set to enabled.

You MUST have these two items enabled for Windows 95/98 to run properly on

Download from Www.Somanuals.com. All Manuals Search And Download.

Drivers Installation

SY-5EHM/5EH5 V1.3

your system.

ꢁ

Install Windows 95/98

ꢁ

If you installed Windows 95 you will now need to upgrade your USB driver

by running the following program on your Windows CD:

Win95/OSR2/Usbsupp/USBsupp.exe

ꢁ

After installation of windows, you will need to install the ETEQ drivers.

Follow the instruction below.

Click the Enter Install the drivers button to display the list of drivers that

can be installed on your Motherboard. The start-up program displays the

drivers available for the 5EHM/5EH5 V1.3 and the Windows version you

use. Click the Install drivers button to display the list of drivers that can be

installed on your Motherboard. The start-up program displays the drivers

available for the 5EHM/5EH5 V1.3.

driver

revision:

ETEQ 4 in 1 driver package

Cancel

(Driver Installation Menu)

A short description of all available drivers follows:

ETEQ 4in1 driver package

ꢁ

The 4 in 1 driver package includes all drivers your motherboard needs. After

selecting this driver package, one driver will be installed automatically (the

IRQ remapping utility), the other three are installed if selected. By default

all three drivers are selected. A description of the 4 drivers follows:

Download from Www.Somanuals.com. All Manuals Search And Download.

Drivers Installation

SY-5EHM/5EH5 V1.3

Bus Master PCI IDE Driver

This driver will speed up the data-transfer rate to and from the

harddisk.

AGP VxD Driver

This driver must be installed in order to be able to make use of the

on-board AGP Video functionality.

ETEQ Chipset Functions Registry

This driver will make the necessary changes to the Windows

registry, in order to make sure that Windows has no problems

recognizing your ETEQ chipset.

IRQ remapping utility (This driver is installed automatically)

This utility will remap the IRQ lines to make sure that everything

functions properly under Windows.

Select which driver you want to install and click OK, or click Cancel to

return to the main menu. When the installation program of a driver starts

running the SOYO-CD will exit.

Note: When the installation is complete, most drivers require to restart

your system before they can become active.

Step 3. Check the Latest Releases

Click the 'Check the latest Releases' button to go the SOYO Website to

automatically find the latest BIOS, manual and driver releases for your

motherboard. This button will only work if your computer is connected to

the internet through a network or modem connection. Make sure to get

your modem connection up before clicking this button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Drivers Installation

SY-5EHM/5EH5 V1.3

Step 4. Enter the SOYO CD

Select which driver you want to install and click OK, or click Cancel to

return to the main menu. When the installation program of a driver starts

running the SOYO-CD will exit. After finishing the installation, restart the

SOYO-CD and install the next driver.

Note: Once you have selected a driver, the system will automatically exit

the SOYO CD to begin the driver installation program. When the

installation is complete, most drivers require to restart your system before

they can become active.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharp Copier AR 160 User Manual
Sony Cell Phone Z610i User Manual
Sony Digital Camera XCD SX910CR User Manual
Sony Ericsson Telephone W760i User Manual
Sony Universal Remote DAV FR8 User Manual
Summit Refrigerator FF1152SS User Manual
Sunbeam Outdoor Ceiling Fan FA7200 User Manual
Sunbeam Pedicure Spa FB6500 User Manual
Sun Microsystems Home Theater Server X4500 User Manual
Sylvania Speaker System SR 748 User Manual