SY-5EMA+ V1.0
Super 7 ™
Motherboard
Quick Start Guide
Tested To Comply
With FCC Standards
C
FC
FOR HOME OR OFFICE USE
POST CONSUMER
100% RECYCLED PAPER
Download from Www.Somanuals.com. All Manuals Search And Download.
SPORTON INTERNATIONAL INC.
Declaration of Conformity
According to 47 CFR, Part 2 and 15 of the FCC Rules
Declaration No.: D8D0404
Dec. 09, 1998’
The following designated product
EQUIPMENT: Main Board
MODEL NO.: SY-5EMA+
which is the Class B digital device complies with 47 CFR Parts 2 and 15 of the FCC rules.
Operation is subject to the following two conditions : (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The product was tested with the following configuration:
Monitor: SONY/AK8GDM17SE2T
USB Mouse: WINIC/F4ZFDM-A50
PS/2 Mouse: GENIUS/FSUGMZFC
Printer: HP/DS17XU2225
PS/2 Keyboard: SILITED/GYUM99SK
Modem: ACEEX/IF AXDM1414
This declaration is given for the manufacturer
SOYO COMPUTER INC.
No.21, Wu-Kung 5 Rd., Hsing Chuang City,
Taipei Hsien, Taiwan, R.O.C.
The test was carried out by
SPORTON INTERNATIONAL INC.
6F, No. 106, Hsin Tai Wu Rd., Sec. 1, His Chih,
Taipei Hsien, Taiwan, R.O.C.
Download from Www.Somanuals.com. All Manuals Search And Download.
SOYO ™
SY-5EMA+ V1.0 Super7
Pentium® Class CPU supported
Ô
Motherboard
ETEQ82C663x PCI/AGP Motherboard
ATX Form Factor
Copyright © 1999 bySoyo Computer Inc.
Trademarks:
Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their
owners.
Product Rights:
Product and corporate names mentioned in this publication are used for identification purposes
only and may be registered trademarks or copyrights of their respective companies.
Copyright Notice:
All rights reserved. This manual is copyrighted by Soyo Computer Inc. You may not reproduce,
transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of
this publication without express written permission of Soyo Computer Inc.
Disclaimer:
Soyo Computer Inc. makes no representations or warranties regarding the contents of this
manual. We reserve the right to revise the manual or make changes in the specifications of the
product described within it at any time without notice and without obligation to notify any
person of such revision or change. The information contained in this manual is provided for
general use by our customers. Our customers should be aware that the personal computer field is
the subject of many patents. Our customers should ensure that their use of our products does not
infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights
of third parties and not to infringe upon or assist others to infringe upon such rights.
Restricted Rights Legend:
Use, duplication, or disclosure by the Government is subject to restrictions set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
252.277-7013.
About This Guide:
This Quick Start Guide is for assisting system manufacturers and end users in setting up and
installing the Motherboard. Information in this guide has been carefully checked for reliability;
however, no guarantee is given as to the correctness of the contents. The information in this
document is subject to change without notice.
If you need any further information, please visit our Web Site on the Internet. The address is
"http://www.soyo.com.tw".
* These specifications are subject to change without notice.
Version 1.1 Edition: April 1999
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
1
Introduction
Congratulations on your purchase of the SY-5EMA+ V1.0 PCI/AGP Motherboard. This
Quick Start Guide describes the steps for installing and setting up your new Motherboard.
This guide is designed for all users to provide the basic steps of Motherboard setting and
operation. For further information, please refer to SY-5EMA+ V1.0 Motherboard User's
Guide and Technical Reference online manual included on the CD-ROM packed with your
Motherboard.
Unpacking
When unpacking the Motherboard, check for the following items:
Ø
Ø
Ø
Ø
Ø
The SY-5EMA+ V1.0 Motherboard
This Quick Start Guide
The Installation CD-ROM
One IDE Device Flat Cable
One Floppy Disk Drive Flat Cable
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
SY-5EMA+ V1.0 Motherboard Layout
DIMM3
DIMM 2
DIMM 1
CPUFAN
PS/2 Mouse
Connector
PS/2 KB
Connector
1
*
ATX Power
SW2
P.B. SRAM
64Kx64
USB1
USB2
P.B. SRAM
64Kx64
(Optional)
®
TAG 32Kx8
JP44
IDE 2 IDE 1
ETEQ
1
3
FDC
EQ82C6638
3
1
WOL
Header
SW1
AGP Slot
1
1
1
3V
Lithium
Battery
PCI Slot #1
IR
SMC
®
5
1
FDC37C669Q
PCI Slot #2
PCI Slot #3
PCI Slot #4
PCI Slot #5
JP5
3
1
CHAFAN
ETEQ
1
EQ82C6629
_
_
HDD LED
+
SPK
_
Turbo
LED
+
+
Keylock
PW2
RST
ISA Slot #1
ISA Slot #2
_
Power
LED
+
Key Features
Ø
Ø
Ø
Super 7 TM Platform
512KByte/1MByte L2 cache
Ø
Ø
Ø
Ø
Ø
Fan-off in Suspend mode
5x32-bit bus mastering PCI slots
2xUSB ports, 1xIrDA port
Supports multiple-boot function
Y2K Complaint
Supports CPU voltage from 2.0v to 3.5v
in 0.1v increments
Ø
Ø
Ø
PC98, ACPI, Ultra DMA/33
Power-on by modem or RTC alarm
Supports Wake On LAN (WOL)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
2
Installation
To avoid damage to your Motherboard, follow these simple rules while handling
this equipment:
l
Before handling the Motherboard, ground yourself by grasping an unpainted portion
of the system's metal chassis.
l
l
Remove the Motherboard from its anti-static packaging. Hold it by the edges and
avoid touching its components.
Check the Motherboard for damage. If any chip appears loose, press carefully to seat
it firmly in its socket.
Follow the directions in this section designed to guide you through a quick and correct
installation of your new SY-5EMA+ V1.0 Super 7 ™ Motherboard. For detailed information,
please refer to SY-5EMA+ V1.0 Motherboard User's guide and Technical Reference online
manual included on the CD-ROM packed with your Motherboard.
PREPARATIONS
Gather and prepare all the necessary hardware equipment to complete the installation
successfully:
u
u
u
u
u
u
u
u
u
u
u
Pentium® class processor with cooling fan
DRAM memory modules
Computer case and chassis with adequate power supply unit
Monitor
Keyboard
Pointing Device (PS/2 mouse)
VGA Card
Sound Card (optional)
Speaker(s) (optional)
Disk Drives: HDD, CD-ROM, Floppy drive …
External Peripherals: Printer, Plotter, and Modem- (optional)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
Install the Motherboard
Follow the steps below in order to perform the installation of your new SY-5EMA+ V1.0
Super 7 ™ Motherboard.
Step 1. Install the CPU
To mount the Pentium® class processor that you have purchased separately, follow these
instructions.
CPU Mount Procedure
1
2
3
4
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole distinctive edge on the
socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that will ensure
system stability. The fan prevents overheating, therefore prolonging the life of
your CPU.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
Step 2. Set SW2 for CPU Voltage
SW2 is used to set the CPU core voltage. Please verify the correct voltage settings with your
dealer before installation. Use the following table to set SW2 to the proper voltage value
according to the specifications marked on your CPU:
Voltage Setting: SW2
Processor
Voltage
1
2
3
4
5
AMD K5 PR100
AMD K5 PR133
AMD K5 PR166
3.52 V
on
on
on
on
off
The AMD K5 and K6 come in several versions with different voltages.
Please verify the correct voltage settings with your dealer before
installation. The most common K5 runs on 3.52V.
AMD K6 166
AMD K6 200
on
off
off
off
on
on
off
off
2.9 V
3.2 V
AMD K6 233
off
on
AMD K6 266
AMD K6 300
AMD K6-2 266
AMD K6-2 300
AMD K6-2 333
AMD K6-2 350
AMD K6-2 366
AMD K6-2 380
AMD K6-2 400
2.2 V
off
on
off
off
off
AMD K6-2 450
AMD K6-2 475
AMD K6-2 500
AMD K6-III 400
AMD K6-III 450
2.4 V
off
off
on
off
off
The Cyrix 6X86(L) and M
voltages. Please ask your dealer for the correct voltage.
¢
º
come in several versions with different
Cyrix 6x86(L) PR166+
Cyrix 6x86(L) PR200+
Cyrix 6x86MX PR166
Cyrix 6x86MX PR200
Cyrix 6x86MX PR233
Cyrix 6x86MX PR266
Cyrix MII 300
Cyrix MII 333
Cyrix MII 350
Cyrix MII 366
Cyrix MII 380
Intel P54C P100
Intel P54C P133
Intel P54C P166
Intel P54C P200
2.9 V
3.3 V
on
on
off
off
off
on
on
off
off
on
The P54C (standard Pentium®) comes in several versions with different
voltages. Please ask your dealer for the correct voltage. The most
common P54C runs on 3.3V.
Intel P55C P166
Intel P55C P200
Intel P55C P233
2.8 V
off
off
off
on
off
The P55C (MMX) processors have the same voltage setting.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
Voltage Setting: SW2
Processor
Voltage
1
2
3
4
5
IDT WinChip C6/2-225*
IDT WinChip 2-266
IDT WinChip 2-300
3.52 V
on
on
on
on
off
The IDT WinChip C6/2 comes in several versions with different. Voltage.
Please ask your dealer for the correct voltage.
IDT WinChip C6/2 -200*
IDT WinChip 2 -233*
Rise mP6 PR266
3.3 V
2.8 V
on
off
off
on
on
on
off
off
off
off
Step 3. Set SW1 for CPU Frequency
The DIP switch SW1 enables you to assign the Frequency Multiplier, CPU Host Bus Clock,
AGP Clock and PCI Clock, as shown in the following table:
CPU
Multiplier Bus JP10 JP8 JP9
Clock
Frequency Setting: SW1
Processor
1
2
3
4
5
6
AMD K5 PR100
AMD K5 PR133
AMD K5 PR166
AMD K6 166
AMD K6 200
AMD K6 233
AMD K6 266
AMD K6 300
AMD K6-2 266
1.5x
2.0x
2.5x
2.5x
3x
66MHz
66MHz
66MHz
66MHz
66MHz
66MHz
66MHz
66MHz
66MHz
66MHz
100MHz
66MHz
95MHz
100MHz
66MHz
95MHz
100MHz
100MHz
95MHz
100MHz
100MHz
100MHz
66MHz
75MHz
66MHz
66MHz
75MHz
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
1-2
2-3
1-2
1-2
2-3
1-2
1-2
1-2
1-2
1-2
1-2
1-2
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
off off off off off off
on off off off off off
on on off off off off
on on off off off off
off on off off off off
off off off off off off
on off on off off off
on on on off off off
on off on off off off
on on on off off off
off on off off off on
off on on off off off
off off off on off on
off off off off off on
off off on off off off
on off on on off on
on off on off off on
on on on off off on
off on on on off on
off on on off off on
on off on off off on
on on on off off on
on off off off off off
on off off off on off
on off off off off off
on on off off off off
on off off off on off
3.5x
4.0x
4.5x
4.0x
4.5x
3x
AMD K6-2 300
AMD K6-2 333
5.0x
3.5x
3.5x
5.5x
4.0x
4.0x
4.5x
5.0x
5.0x
4.0x
4.5x
2.0x
2.0x
2.0x
2.5x
2.0x
AMD K6-2 350
AMD K6-2 366
AMD K6-2 380
AMD K6-2 400
AMD K6-2 450
AMD K6-2 475
AMD K6-2 500
AMD K6-III 400
AMD K6-III 450
Cyrix 6x86 MX PR 166+
Cyrix 6x86 PR MX 200+
Cyrix 6x86 MX PR 166
Cyrix 6x86 MX PR 200
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
CPU
Bus
Clock
Frequency Setting: SW1
Processor
Multiplier
JP10 JP8 JP9
1
2
3
4
5
6
Cyrix 6x86 MX PR 233
Cyrix 6x86 MX PR 266
2.5x
2.5x
3.5x
3x
75MHz
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
2-3
1-2
2-3
2-3
2-3
2-3
1-2
1-2
1-2
1-2
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
on on off off on off
on on off on on off
off off off off off off
off on off off on off
on off on off off off
off off off off on off
off on off on on off
off on off off off on
on on off off off on
off on off off off on
off off off off off off
on off off off off off
on on off off off off
off on off off off off
off off off off off off
83MHz
66MHz
75MHz
66MHz
75MHz
83MHz
100MHz
100MHz
100MHz
66MHz
66MHz
66MHz
66MHz
66MHz
Cyrix MII 300
Cyrix MII 333
4.0x
3.5x
3x
Cyrix MII 350
Cyrix MII 366
Cyrix MII 380
3x
2.5x
3x
P54C
P54C
P100
P133
1.5x
2.0x
2.5x
3x
P54C/P55C P166
P54C/P55C P200
P55C
P233
3.5x
IDT WinChip C6/2-
200
IDT WinChip C6/2-
225
3x
3x
66MHz
75MHz
1-2
1-2
2-3
2-3
2-3
2-3
off on off off off off
off on off off on off
IDT WinChip 2-233
IDT WinChip 2-266
IDT WinChip 2-300
3.5x
2.33x
2.5x
3x
66MHz
100MHz
100MHz
66MHz
1-2
1-2
1-2
1-2
1-2
2-3
1-2
1-2
2-3
1-2
2-3
2-3
2-3
2-3
2-3
off off off off off off
off on on off off on
on on off off off on
off on off off off off
on off off off off on
Rise mP6 PR266
2x
100MHz
This main board supports various CPU multiplier and host bus frequency settings.
*Please select the proper frequency setting based on specifications of the CPU you have
purchased. System stability or components damage, in case of over-specification setting, is
not guaranteed.
*
The K6-2 300 and 333 come in several versions with different host bus frequency
specifications. Please verify the correct host bus frequency settings before installation.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
JP8 is used to indicate the frequency of the CPU bus clock to the ETEQ chipset.
JP9 and JP10 are used to determine that the SDRAM is running at the frequency of the
CPU bus clock or the AGP clock.
CPU BUS
Clock
66MHz
75MHz
AGP BUS
Clock
66MHz
75MHz
SDRAM
Clock
66MHz
75MHz
55MHz
83MHz
PCI Clock JP10 JP8 JP9
33MHz 1-2 2-3 2-3
37.5MHz 1-2 2-3 2-3
2-3 1-2 1-2
1-2 1-2 2-3
83MHz
95MHz
55MHz
27.5MHz
2-3 1-2 1-2 63.4MHz
1-2 1-2 2-3
2-3 1-2 1-2
63.4MHz 31.7MHz
95MHz
66MHz
100MHz
112MHz
124MHz
66MHz
75MHz
33MHz
1-2 1-2 2-3 100MHz
2-3 1-2 1-2 75MHz
1-2 1-2 2-3 112MHz
2-3 1-2 1-2 82.6MHz
1-2 1-2 2-3 124MHz
37.5MHz
82.6MHz 41.3MHz
Note: Use 8ns or faster SDRAM modules (for PC100) when SDRAM is set to run at
the frequency of 95/100MHz.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
Step 4. Attach Connectors
This section tells how to connect internal peripherals and power supply to the Motherboard.
Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Front Panel
Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.),
Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on how to connect internal and external peripherals to your new SY-5EMA+
V1.0 Super 7 ™ Motherboard, please refer to SY-5EMA+ V1.0 Motherboard User's Guide
and Technical Reference online manual on CD-ROM.
Connectors and Plug-ins
IrDA (Infrared Device Header): IR1
Wake-On-LAN Header: JP44
Pin1
VCC
Pin2
None
Pin3
IRRX
Pin4
GND
Pin5
IRTX
Pin1
5VSB
Pin2
GND
Pin3
MP-Wakeup
USB
CPU Cooling Fan: CPUFAN
Chassis Cooling Fan: CHAFAN
Connect your USB devices
to this header.
Pin1
GND
Pin2
12V
Key Lock
Pin3
SENSOR
Pin1
GND
Pin2
12V
Pin3
SENSOR
Power LED
Speaker
Power LED
Keylock
_
_
_
Pin1
Control Pin
Pin2
GND
+
Pin1 Pin2 Pin3
5V
+
_
NC GND
Speaker
+
+
Pin1
5V
Pin2
NC
Pin3
NC
Pin4
Speaker out
Reset
Turbo LED
HDD LED
PWRBT
TB LED
HDD LED
Pin2
PWRBT
Pin1
RESET
Pin1
Pin1
Pin1
Pin2
Pin2
Pin2
LED Anode LED Cathode LED Anode LED Cathode Power On/Off GND Power Good GND
ATX Power On/Off: PWRBT
Connect your power switch to this header (momentary switch type).
To turn off the system, please press this switch and hold down for longer than 4 seconds.
ATX Power Supply: ATX PW
Attach the ATX Power cable to this connector. If you use ATX power supply.
When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply can
take at least 720mA load on the 5V Standby lead (5VSB) to meet the standard ATX specifications.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
Step 5. Configure Memory
Your board comes with three DIMM sockets, providing support for up to 768MB of main
memory using DIMM modules from 8MB to 256MB. For 66MHz host bus CPUs use 12ns or
faster DIMM modules; for 83MHz host bus CPUs use 8ns modules.
Memory Configuration Table
MEMORY
CONFIGURATION
DIMM Banks
DIMM 2
DIMM 1
DIMM 3
RAM Type
EDO/SDRAM
EDO/SDRAM
EDO/SDRAM
Single RAM
Module Size (MB)
8/16/32/64/128/256
8/16/32/64/128/256 8/16/32/64/128/256
Step 6. Clear CMOS
Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5, and then by
shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white
colored cap.
CMOS Clearing
JP5 Setting
Clear CMOS Data
Retain CMOS Data
1
1
2
3
short pin 2-3 to
clear the CMOS
Short pin 1-2 to
retain new settings
2
3
Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
3
Quick BIOS Setup
After the hardware installation is complete, turn the power switch on, then press the <DEL>
key during the system diagnostic checks to enter the Award BIOS Setup program. The
CMOS SETUP UTILITY will display on screen. Then, follow these steps to complete the
quick BIOS setup.
Step 1. Select [LOAD SETUP DEFAULT]
Select the “LOAD SETUP DEFAULT” menu and type “Y” at the prompt to load the BIOS
optimal setup.
Step 2. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
Step 3. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and continue the boot
sequence.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
4
The SOYO CD
Your SY-5EMA+ V1.0 Super 7 ™ Motherboard comes with a CD-ROM labeled "SOYO CD."
The SOYO CD contains the user's manual file for your new Motherboard, the drivers
software available for installation, and a database in HTML format with information on SOYO
Motherboards and other products.
Step 1. Insert the SOYO CD into the CD-ROM drive
The SOYO CD will auto-run, and the SOYO CD Start Up Menu will display as shown below.
(SOYO CD Start Up Program Menu)
The SOYO CD Start Up Program automatically detects which SOYO Motherboard you own
and displays the corresponding model name.
Step 2. Read SOYO [5EMA+ V1.0] Manual
Click the Read Manual button to open the user's manual file of your Motherboard.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
Please note that if the Start Up program was unable to determine which SOYO Motherboard
you own, the manual selection menu will pop up, as shown below. Then select the user's
manual file that corresponds to your Motherboard model name and click OK.
SOYO CD Manuals
Please select your manual in the box below
and click OK.
686 boards:
586 boards:
5EMA+ V1.0
OK
Back
(Manual Selection Menu)
The user's manual files included on the SOYO CD are in PDF (Postscript Document) format.
In order to read a PDF file, the appropriate Acrobat Reader software must be installed in
your system.
Note: The Start Up program automatically detects if the Acrobat Reader utility is already
present in your system, and otherwise prompts you on whether or not you want to install it.
You must install the Acrobat Reader utility to be able to read the user's manual file. Follow
the instructions on your screen during installation, then once the installation is completed,
restart your system and re-run the SOYO CD.
Step 3. Install Drivers and Utilities
The following describes the best way of installing Windows 95 or Windows 98 on your
5EMA+ V1.0 Motherboard:
Ø
The following BIOS default settings should not be changed:
1. The‘OnChip USB Controller’ item under ‘Chipset features Setup’ is set to enabled.
2. The‘USB Assigned IRQ’ item under ‘PnP/PCI Configuration is set to enabled.
You MUST have these two items enabled for Windows 95/98 to run properly on your
system.
Ø
Install Windows 95/98
Ø
If you installed Windows 95 you will now need to upgrade your USB driver by
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
running the following program on your Windows CD:
Win95/OSR2/Usbsupp/USBsupp.exe
Ø
After installation of windows, you will need to install the VIA drivers. Follow the
instruction below.
Click the Enter SOYO CD button to display the list of drivers that can be installed on your
Motherboard. The start-up program displays the drivers available for the 5EMA+ V1.0 and
the Windows version you use.
Driver Installation
Please select the driver you want to install and click OK, You will have to
restart your system after installation. Only the drivers that are relevant
to your board are displayed initially.
ETEQ 4in1 driver package
SOYO Speedpro BusMaster Driver for win 95/98
SOYO CD Xpress utility
Display all drivers
on the SOYO CD
Cancel
OK
(Driver Installation Menu)
A short description of all available drivers follows:
Ø
ETEQ 4in1 driver package
u ETEQ Southbridge Driver for Win 95
Windows 95 may not recognize the southbridge of your ETEQ chipset, first install these
drivers.
u ETEQ IRQ remapping utility
To make sure that IRQs are handled correctly by Windows 98, run this utility. (Run this utility
BEFORE installing any drivers)
u ETEQ AGP Drivers
The ETEQ VxD driver for Windows 95/98 must be installed to make use of your AGP card.
(Win95: Make sure that the ETEQ Southbridge drivers are installed FIRST)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
Ø
SOYO SpeedPro Busmaster Driver for Win 95/98
Without the busmaster drivers the CPU will need to be involved every time data is read from
or written to the Harddisk. The busmaster drivers make use of DMA (Direct Memory Access)
to relieve the CPU of this burden, thus speeding up the system.
The SOYO SpeedPro driver makes use of an advanced caching algorithm, which gives it an
advantage over other busmaster drivers.
Note: If you install the SOYO SpeedPro Busmaster driver for Windows 95/98, you can
NOT install the VIA Bus Master drivers.
Ø
SOYO CD Xpress Utility
This utility will enhance your CD-ROM Drive data-thoughput by using space on the Harddisk
as cache. This way application programs can access data faster. This utility is suitable for
Windows 95/98.
Select which driver you want to install and click OK, or click Cancel to return to the main
menu. When the installation program of a driver starts running the SOYO-CD will exit. After
finishing the installation, restart the SOYO-CD and install the next driver. We recommend
you to install all drivers, and to do so in the right sequence (top to bottom).
Note: Once you have selected a driver, the system will automatically exit the SOYO CD to
begin the driver installation program. When the installation is complete, most drivers require
to restart your system before they can become active.
Install the drivers in sequence, starting with the FIRST driver.
If you want to see all the drivers available on the SOYO –CD, click the Display all drivers
on the SOYO CD button. Do NOT install drivers that are not suitable for your board,
otherwise your system may crash.
Step 4. Check the Latest Releases
Click the 'Check the latest Releases' button to go the SOYO Website to automatically find
the latest BIOS, manual and driver releases for your motherboard. This button will only work
if your computer is connected to the internet through a network or modem connection. Make
sure to get your modem connection up before clicking this button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-5EMA+ V1.0 Quick Start Guide
Step 5. Enter the SOYO CD
Click the Enter SOYO CD button to enter the SOYO HTML database. The Start Up
program will activate the default HTML browser installed on your system (for example,
Internet Explorer or Netscape) to visualize the contents of the SOYO CD.
The SOYO CD contains useful information about your Motherboard and other SOYO
products available. For your convenience, this information is available in HTML format,
similar to the format widely used on the Internet.
(SOYO CD HTML Database in English*)
Note: If no HTML browser is installed on your system, the Start Up program will prompt you
on whether or not you would like to install the Internet Explorer* browser. Click YES to install
the HTML browser. After the installation is complete, please restart your system. Then re-run
the SOYO CD and you will be able to browse the SOYO HTML database.
(* Internet Explorer is a Microsoft Trademark)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Edition: April 1999
Version 1.1
International Headquarters
Soyo Computer Inc., (Taiwan)
Tel: 886-2-2290-3300
Korea Branch Office
SOYO TECHNOLOGY CO., LTD.
Tel: 82-2-3272-6481
SY-5EMA+ V1.0
SERIAL
Fax: 886-2-2298-3322
E-mail: [email protected]
Fax: 82-2-704-2619
Email:[email protected]
Email:[email protected]
USA Branch Office
Soyo Tek Inc., (USA)
Tel: (408) 452-7696
U.K. Branch Office
SOYO (U.K.) LTD.
Tel: 44-(0)181-569 4111
Fax: 44-(0)181-569 4134
Email:[email protected]
Fax: (408) 573-7696
E-mail: [email protected]
SOYO Europe
Soyo Europe B.V., (Holland)
Tel: 31-79-3637500
Japan Branch Office
SOYO COMPUTER® è¦ ¡· ª|
À
Fax: 31-79-3637575
Tel: 81-3-33682188
Fax: 81-3-33682199
E-mail: [email protected]
E-mail: [email protected]
Germany Branch Office
SOYO Deutschland GmbH
Tel: 49-(0)441-209100
Hong Kong Branch Office
Soyo Hong Kong Ltd. (H.K.)
Tel: 852-2710-9810
Fax: 49-(0)441-203422
Email:[email protected]
Fax: 852-2710-9078
E-mail: [email protected]
China
GING MEI JEI LTD.
Tel: 86-10-6251-0089/91/92
Fax: 86-10-6251-0311
Email:[email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|