DP SuperSpeed USB 3.0
2-Port PCIe i/e
Quick Installation Guide
Introducing the USB 3.0 2-Port PCIe i/e
The DP SuperSpeed USB 3.0 2-Port PCIe i/e adds
two USB 3.0 ports (1 internal & 1 external) to
yourPCIe-enableddesktopPCenhancingexisting
systems with the latest USB 3.0 technology.
Key Features and Benefits
•
•
•
Compliant with Universal Serial Bus 3.0
Specification, Revision 1.0
Compliant with PCI Express Base
Specification, Revision 2.0
Supports data rate up to 5Gb/s and
backward compatible with previous
versions of USB devices
•
Works with high-bandwidth USB 3.0
devices, such as external hard disks, high
resolution webcams, video surveillance
cameras, digital video cameras, multi-
channel audio and more...
04-0617B
1
Download from Www.Somanuals.com. All Manuals Search And Download.
HardwareInstallation
General instructions for installing the card are
provided below. Since the design of computer
cases and motherboards vary, refer to your
computer’s reference manual for further
information, if needed.
Static Electricity Discharge may permanently
damage your system. Discharge any static
electricity build up in your body by touching your
computer’s case for a few seconds. Avoid any
contact with internal parts and handle cards only
by their external edges.
Note: For low profile systems, remove the full
height bracket and install the low profile bracket
now.
1.
Turn OFF the power to your computer and
any other connected peripheral devices.
Unplug the power cord from the back of the
computer.
2.
3.
4.
Remove your computer cover.
Remove the slot bracket from an available
PCIe slot.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
Carefully align the card's bus connector
with the selected PCIe slot on the
motherboard. Push the board down firmly,
but gently, until it is well seated.
Replace the slot bracket holding screw to
secure the card.
6.
7.
Replace the computer cover and reconnect
the power cord.
DriverInstallation
Follow the steps below to install the driver.
Windows 7 (32-/64-bit) / Vista (32-/64-bit)
1.
Make sure the board is installed, then boot
up Windows.
2.
At the Windows desktop.
For Windows 7:Go directly to step 3.
For Windows Vista: At the Found New
Hardware window, click Cancel.
Insert the driver CD.
3.
For Windows 7: at the CD AutoPlay box,
click Open folder to view files, then double
click Setup.
Do4wnload from Www.Somanuals.com. All Manuals Search And Download.
For Windows Vista: At the CD Autoplay
box, double click Setup.
4.
At User Account Control.
For Windows 7: Click Yes.
For Windows Vista: Click Continue.
At Welcome, click Next.
Select I accept the terms of the license
agreement, click Next.
5.
6.
7.
8.
AtReadytoInstalltheProgram,clickInstall.
Wait while the InstallShield Wizard
configures your system. Depending on
your system hardware this process may
take several minutes to complete.
At InstallShield Wizard Complete, click
Finish.
9.
Windows XP (32-/64-bit)
1.
Make sure the board is installed, then boot
up Windows.
2.
3.
At Found New Hardware, click Cancel.
Insert the driver CD. Click Start, Run. Type
D:\Setup.exe, click OK. (Change D: to
match your CD\DVD-ROM drive letter)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
5.
At Welcome, click Next.
Select I accept the terms of the license
agreement, click Next.
6.
7.
AtReadytoInstalltheProgram,clickInstall.
Wait while the InstallShield Wizard
configures your system. Depending on
your system hardware this process may
take several minutes to complete.
At InstallShield Wizard Complete, click
Finish.
8.
To Verify Successful Installation
1.
Go to Device Manager to verify installation.
For Windows 7: Right click Computer, click
Manage, click Device Manager.
For Windows Vista: Right click Computer,
click Manage, click Continue, then click
Device Manager.
For Windows XP: Right click My Computer,
click Manage, click Device Manager.
Double click Universal Serial Bus
controllers. A USB 3.0 Host Controller
and a USB 3.0 Root Hub should be
displayed.
2.
Do6wnload from Www.Somanuals.com. All Manuals Search And Download.
TechnicalSupportandWarranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a lifetime manufacturer warranty with this product. This warranty covers
the original purchaser and guarantees the product to be free of any defects in materials
or workmanship for the life of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
fax a request to 510-657-5962. Your RMA request will be processed, if the product
is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All accessories that came with the
original package must be included.
•
Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
•
•
You are responsible for the cost of shipping to SIIG. Ship the product to the
followingaddress:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingmanufacturerofITconnectivitysolutions
(including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy
I/Oadapters)thatbridgetheconnectionbetweenDesktop/Notebooksystems
and external peripherals. SIIG continues to grow by adding A/V and Digital
Signageconnectivitysolutionstoourextensiveportfolio.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
ourproducts, aswellasoneofthelowestdefectivereturnratesintheindustry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajordistributors, systemintegrators, andVARsintheAmericasand
theUK,andthroughe-commercesites.
PRODUCT NAME
DP SuperSpeed USB 3.0 2-Port PCIe i/e
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
DP SuperSpeed USB 3.0 2-Port PCIe i/e is a trademark of SIIG, Inc. SIIG and the SIIG logo
are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of
MicrosoftCorporation. Allothernamesusedinthispublicationareforidentificationonlyand
may be trademarks of their respective owners.
April, 2011
Copyright © 2011 by SIIG, Inc. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|