Digital WireleRssSSys1te6m0
Instruction manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Important safety information ........................................................................... 2
The RS 160 digital RF headphone system ...................................................... 4
Delivery includes .................................................................................................. 5
Product overview ................................................................................................. 6
Overview of the HDR 160 headphones ..................................................... 6
Overview of the TR 160 transmitter .......................................................... 7
Overview of the indicators and acoustic signals ..................................... 8
Overview of the connection stages .......................................................... 10
Putting the RS 160 into operation ................................................................. 11
Setting up the transmitter ......................................................................... 11
Connecting the transmitter to a sound source ...................................... 12
Powering the transmitter .......................................................................... 13
Powering the headphones ......................................................................... 15
Adjusting the headband of the headphones ......................................... 17
Using the RS 160 ............................................................................................... 18
Switching the transmitter on and off ...................................................... 18
Switching the headphones on and off .................................................... 20
Adjusting the volume on the headphones ............................................. 21
Adjusting the signal of the sound source ............................................... 22
Associating the headphones to the transmitter ................................... 23
Listening with several headphones simultaneously ............................ 26
Cleaning the RS 160 .......................................................................................... 27
If a problem occurs ... ........................................................................................ 28
Accessories and spare part .............................................................................. 30
Specifications ...................................................................................................... 31
Manufacturer declarations ............................................................................... 32
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
Important safety information
•
Please read this instruction manual carefully and completely before
using the product.
•
Make this instruction manual easily accessible to all users at all times.
Always include this instruction manual when passing the product on to
third parties.
•
•
Do not use the product in situations which require special attention
(e.g. in traffic or when performing skilled jobs).
Always keep the product dry and do not expose it to extreme
temperatures (normal operating temperatures: 0 °C/32 °F to 40 °C/
104 °F).
•
•
Use the product with care and store it in a clean, dust-free
environment.
Switch the headphones off after use to conserve battery power.
Remove the batteries if the product will not be used for extended
periods of time.
•
The headphones contain magnets that generate a magnetic field which
could cause interference with cardiac pacemakers and implanted
defibrillators. Keep the headphones at least 1.2” (3 cm) from cardiac
pacemakers or implanted defibrillators.
•
Please protect your hearing from high volume levels. Sennheiser
headphones also sound exceptionally good at low volumes.
•
•
Only use the Sennheiser supplied power supply units.
To reduce the risk of fire or electric shock, do not use the product near
water and do not expose it to rain or moisture.
•
Unplug the power supply unit from the wall socket
– to completely disconnect the product from the mains
– during lightning storms or
– when unused for long periods of time.
•
•
Only operate the power supply unit from the type of power source
specified in the chapter “Specifications” (see page 31).
Ensure that the power supply unit is
– in a safe operating condition and easily accessible,
– properly plugged into the wall socket,
– only operated within the permissible temperature range,
– not covered or exposed to direct sunlight for longer periods of time
in order to prevent heat accumulation (see “Specifications” on
page 31).
•
•
Do not operate the product near any heat sources.
Only use attachments/accessories specified by Sennheiser (see
“Accessories and spare part” on page 30).
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
Replacement parts
When replacement parts are required, be sure the service technician uses
replacement parts specified by Sennheiser or those having the same
characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock, or other hazards.
Intended use
Intended use of the product includes
•
having read this instruction manual, especially the chapter “Important
safety instructions” on page 2,
•
using the product within the operating conditions and limitations
described in this instruction manual.
“Improper use” means using the product other than as described in this
instruction manual, or under operating conditions which differ from those
described herein.
Safety instructions for the NiMH rechargeable batteries
If abused or misused, the rechargeable batteries may leak. In extreme
cases, they may even present
•
•
•
•
a heat hazard,
a fire hazard,
an explosion hazard,
a smoke or gas hazard.
Please understand that Sennheiser does not accept liability for damage
arising from abuse or misuse.
Keep away from
children.
Only use rechargeable batteries
recommended by Sennheiser.
Observe correct polarity.
Do not short-circuit.
Do not expose to
moisture.
Switch rechargeable battery-
powered products off after use.
Do not pack charged
batteries loose – danger
of shorting out/fire
hazard.
When not using rechargeable
batteries for extended periods
of time, charge them regularly
(about every 3 months).
Only charge
rechargeable batteries
at ambient
Do not heat above 70 °C/
158 °F, e.g. do not expose to
sunlight or throw into a fire.
temperatures between
10 °C/50 °F and 40 °C/
104 °F.
Do not mutilate or
dismantle.
Do not continue to use
defective rechargeable
batteries.
Immediately remove
rechargeable batteries
from obviously
Dispose of rechargeable
batteries at special collection
points or return it to your
specialist dealer.
defective devices.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The RS 160 digital RF headphone system
The RS 160 digital RF headphone system
The RS 160 is an RF stereo hi-fi headphone system with comprehensive
technical features. Its transparent and balanced sound image with
excellent bass response makes this system an ideal choice for hi-fi, home
cinema and TV use.
Enjoy total freedom of sound, stylish design and maximum comfort.
Additional features of the RS 160 headphone system
•
•
•
•
Transmits uncompressed audio over a robust 2.4 GHz digital link,
enabling you to enjoy your music without the hassles of cables.
Dynamic transducer systems with powerful neodymium magnets
deliver clear and detailed audio reproduction.
Kleer’s uncompressed digital wireless transmission delivers CD-quality
sound.
No set-up required – just plug and play. Simply connect the transmitter
to your personal audio/video player, put on the headphones and turn
it on!
•
TR 160 transmitter with multi-receiver capability, enabling up to
4 people to listen to the same sound source.
KleerTM wireless transmission technology
The RS 160 headphone system features the digital wireless audio
transmission technology from Kleer. The Kleer company has developed an
RF-based wireless transmission standard (of the same name) that offers
lossless audio transmission in CD-quality while consuming minimal power.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Delivery includes
Delivery includes
1
1
1
1
1
2
1
1
HDR 160 headphones
TR 160 transmitter
power supply unit with country adapters
stereo audio cable with 3.5 mm jack plugs
DC cable (4.0 mm DC jack socket to 2 x 4.0 mm DC plug)
AAA size NiMH rechargeable batteries, 1.2 V
quick guide incl. CD ROM with detailed instruction manual (PDF file)
safety guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Product overview
Overview of the HDR 160 headphones
³
·
º
¿
´
¶
²
»
»
³ Headband
¿ VOLUME + button
´ Multi-function button
² VOLUME – button
· Ear pads
» Battery compartments
¶ Charging socket (DC 5V 0.5A)
º Multi-function LED
With the multi-function button ´, you can switch the
headphones on/to standby mode, set the headphones to multi-user
operation, mute the headphones and associate the headphones.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Overview of the TR 160 transmitter
1
2
3
5
4
ቢ Multi-function button
ባ Multi-function LED
ቤ Socket for power supply unit (DC 5V 0.5A)
ብ Audio input (AUDIO IN)
ቦ VOLUME control (– +)
With the multi-function button ቢ, you can switch the
transmitter on/to standby mode, set the transmitter to multi-user
operation and associate the transmitter.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Overview of the indicators and acoustic signals
Meaning of the pictograms for the different LEDs
Status
Meaning
The LED is lit.
The LED flashes once per second.
1s
The LED flashes twice every 5 seconds.
5s
Indicators on the headphones
Indicator
Status
Meaning
Multi-function LED º
The rechargeable batteries
are almost flat.
1s
The rechargeable batteries
are being charged.
off
The rechargeable batteries
are fully charged.
The headphones are in
enrollment mode (searching
for a transmitter to pair
with).
1s
The headphones are in
association mode
(exchanging device
information with the
transmitter).
1s
5s
The headphones receive an
audio signal.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Indicators on the transmitter
Indicator
Status
Meaning
Multi-function LED ባ
The signal of the sound
source is too strong.
The transmitter is in
enrollment mode (searching
for headphones to pair
with).
1s
1s
The transmitter is in
association mode
(exchanging device
information with the
headphones).
The transmitter is in single-
user operation.
5s
5s
The transmitter is in multi-
user operation.
Acoustic signal of the headphones
1 short beep Meaning
The minimum volume is reached.
The maximum volume is reached.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Overview of the connection stages
Connection establishment
Enrollment mode When you switch the headphones and the transmitter on, the headphones
search for a suitable transmitter.
1s
Pairing The headphones and the transmitter have recognized each other and the
headphones are paired with the transmitter.
5s
Single-user and multi-user operation
Single-user operation You can listen to your sound source via one pair of headphones. By default,
the transmitter is set to single-user operation (see page 23).
5s
Multi-user operation In order to be able to listen to your sound source with several headphones
simultaneously, you have to set your transmitter to multi-user operation
(see page 26).
5s
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the RS 160 into operation
Putting the RS 160 into operation
Setting up the transmitter
̈ Choose a suitable place near your sound source (e.g. TV, stereo or home
cinema system).
Music
Photos
Videos
Extras
Settings
Shuffle Songs
̈ Do not place the transmitter close to metal objects such as shelf bars,
reinforced concrete walls, etc. as this can decrease the transmitter’s
range.
̈ Make sure that there is direct line of sight between the transmitter and
the headphones.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the RS 160 into operation
Connecting the transmitter to a sound source
You can connect the TR 160 transmitter to different sound sources, such
as a TV, a DVD player or a stereo system.
̈ Switch your sound source off before connecting the transmitter.
4
6
̈ Connect the audio cable ቧ to the audio input ብ of the transmitter.
̈ Connect the audio cable ቧ to the headphone socket of your sound
source.
6
̈ Adjust the volume on your sound source to a medium level. This
improves the quality of wireless sound transmission. If necessary,
check the settings of your sound source.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the RS 160 into operation
Powering the transmitter
For powering the TR 160 transmitter, you can use:
•
•
the supplied SSA-4P 5050F power supply unit for stationary use
rechargeable batteries (AA size, NiMH, 1.2 V, at least 1,300 mAh) for
mobile use
•
standard batteries (AA size, 1.5 V) for mobile use
Powering the transmitter via the power supply unit
̈ Select the suitable country adapter ቩ for your wall socket.
̈ Slide the country adapter ቩ onto the power supply unit ቨ until it locks
into place.
8
EU
UK
US
AU
7
̈ Connect the connector ቪ of the power supply unit to the socket ቤ.
3
2
9
̈ Plug the power supply unit ቨ into a wall socket.
The transmitter switches on. The multi-function LED ባ flashes green
after 9 seconds. The transmitter is in enrollment mode.
1s
You can also connect the charging cable ቫ to the connector ቪ of
the power supply unit to conveniently charge your headphones
(see “Charging rechargeable batteries in the headphones” on
page 16 ).
0
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the RS 160 into operation
Inserting rechargeable batteries/standard batteries into the transmitter
and changing them
̈ Power the TR 160 transmitter either with rechargeable batteries (AA
size, NiMH, 1.2 Vat least 1,300 mAh) or standard batteries (AA size,
1.5 V).
̈ Open the battery compartment at the base of the transmitter as
shown.
̈ Remove the depleted rechargeable batteries or batteries (where
applies).
̈ Insert the rechargeable batteries or batteries. Observe correct polarity.
̈ Close the battery compartment.
The cover locks into place with an audible click and the transmitter
switches on. The multi-function LED ባ flashes green after 9 seconds.
The transmitter is in enrollment mode.
1s
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the RS 160 into operation
Powering the headphones
For powering the headphones, you can use:
•
•
standard batteries (AAA size, 1.5 V)
rechargeable batteries (AAA size, NiMH, 1.2 V, 600 mAh)
If you use rechargable batteries, you can charge them in the headphones
using the charging cable ቫ (see next chapter).
Inserting rechargeable batteries/standard batteries into the
headphones and changing the rechargeable batteries/standard
batteries
̈ Remove the ear pads · from both ear cups by turning the ear pads in
the direction of the arrow until you overcome a slight resistance.
̈ Lift the ear pads · off the ear cups.
·
·
̈ Remove the depleted rechargeable batteries or batteries (where
applies).
̈ Insert the rechargeable batteries or batteries. Observe correct polarity.
̈ Secure the ear pads · to the ear cups.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the RS 160 into operation
Charging rechargeable batteries in the headphones
CAUTION Danger of damage to the headphones!
If standard batteries are inserted into the headphones, the
batteries can leak during charging and damage the
headphones.
̈ Only charge rechargeable batteries in your headphones.
Charge the rechargeable batteries for at least 16 hours prior to first time
use. Subsequent charging time is about half of the previous operating
time. The operating time is up to 24 hours.
16h
̈ Connect the charging cable ቫ to the charging socket ¶ on the
headphones.
̈ Connect the charging cable ቫ to the socket ቤ on the transmitter.
̈ Connect the charging cable ቫ to the connector ቪ of the power supply
unit.
̈ Plug the power supply unit ቨ into a wall socket.
The rechargeable batteries are being charged. The multi-function
LED º on the headphones lights up orange.
7
º
¶
9
3
0
The transmitter automatically switches from battery operation to
mains operation if you connect the power supply unit or the
charging cable ቫ to the transmitter.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the RS 160 into operation
Adjusting the headband of the headphones
For good sound quality and best possible comfort, the headband has to be
adjusted to properly fit your head. To do so, adjust the headband ³ via its
snap-in locking mechanism:
³
̈ Wear the headphones so that the headband ³ runs over the top of
your head.
̈ Adjust the length of the headband so that
– your ears are completely inside the earpads,
– you feel even, gentle pressure around your ears,
– a snug fit of the headband ³ on the head is ensured.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RS 160
Using the RS 160
To switch the product on and to listen to your sound source, proceed as
follows:
Sequence of steps
Page
16
–
1. Make sure that the rechargeable batteries are charged.
2. Switch your sound source on.
3. Switch your transmitter on.
4. Switch your headphones on.
5. Adjust the desired volume.
18
20
21
Switching the transmitter on and off
Switching the transmitter on
̈ Press the multi-function button ቢ for approx. 1 second.
The transmitter switches on. The multi-function LED ባ flashes green,
indicating that the transmitter is in enrollment mode.
1s
5s
Once the transmitter has found suitable headphones, it pairs with the
headphones and transmits an audio signal. The multi-function LED º
of the headphones and the multi-function LED ባ of the transmitter
flash slowly.
º
1
2
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RS 160
Switching the transmitter off
̈ Press the multi-function button ቢ for approx. 1 second.
The multi-function LED ባ goes off. The transmitter is in standby mode.
To disconnect the transmitter from the mains:
̈ Pull out the mains plug from the wall socket.
If the headphones are outside the transmission range or switched
off for more than 5 minutes, the transmitter automatically switches
to standby mode. The multi-function LED ባ goes off. In standby
mode, the transmitter’s power consumption is very low so that it
can remain connected to the mains.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RS 160
Switching the headphones on and off
WARNING Danger due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects.
̈ Before putting the headphones on, set the volume to a low
level.
̈ Do not continuously expose yourself to high volumes.
Switching the headphones on
̈ Press the multi-function button ´ for approx. 1 second.
The headphones switch on. The multi-function LED º flashes green,
indicating that the headphones are in enrollment mode.
1s
5s
Once the headphones have found a suitable transmitter, the
transmitter pairs with the headphones and transmits an audio signal.
The multi-function LED º of the headphones and the multi-function
LED ባ of the transmitter flash slowly.
º
´
2
Switching the headphones off
̈ Press the multi-function button ´ for approx. 1 second.
The multi-function LED º goes off. The headphones are in standby
mode.
If there is no signal from the transmitter for more than 5 minutes,
the headphones automatically switch to standby mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RS 160
Adjusting the volume on the headphones
̈ Press the VOLUME – button ² or the VOLUME + button ¿ repeatedly
until the volume is adjusted to a comfortable and undistorted level.
²
¿
Vol -
Vol +
Vol -
Vol +
Muting the headphones
̈ Briefly press the multi-function button ´ to mute the headphones
or to cancel the muting.
´
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RS 160
Adjusting the signal of the sound source
The transmitter automatically ensures that the headphones always
receive an optimum signal. If necessary, use the VOLUME control ቦ to
adjust the volume of the audio signal.
However, the signal of the sound source can be so strong that it can no
longer be automatically adjusted.
If the signal of the sound source is too strong, the multi-function LED ባ of
the transmitter flashes or lights up red.
̈ Either adjust the VOLUME control ቦ on the transmitter so that the
multi-function LED ባ stops flashing or lighting up red.
̈ Or adjust the volume of your sound source so that the multi-function
LED ባ stops flashing or lighting up red.
2
5
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RS 160
Associating the headphones to the transmitter
The RS 160 system features the digital wireless audio transmission
technology from Kleer. You can also associate other Kleer
compatible headphones (e.g. the Sennheiser MX W1) to the
transmitter. For more information, refer to the chapter “Associating
other Kleer compatible headphones to the transmitter” on page 25
or to the instruction manual of the corresponding product.
The headphones and the transmitter are already associated upon delivery.
You only have to associate the headphones to the transmitter
•
•
if you want to use another pair of Kleer compatible headphones or
if the transmission between the headphones and the transmitter is
disturbed by interferences in the vicinity.
If you want to use several headphones, refer to the chapter “Associating
several headphones to the transmitter” on page 25.
Associating the HDR 160 headphones to the transmitter
When associating the headphones to the transmitter, the distance
between the transmitter and the headphones should not exceed 1 m.
̈ Make sure that the transmitter and the headphones are in standby
mode (see page 19 and 20).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RS 160
̈ Simultaneously press the multi-function button
ቢ
of the
transmitter and the multi-function button ´ of the headphones for
7 seconds.
1s
The multi-function LED ባ of the transmitter flashes green.
7s
1
2
´
After approx. 30 seconds, the headphones are paired with the transmitter
and you can hear your sound source via the headphones. The multi-
function LED º of the headphones and the multi-function LED ባ of the
transmitter flash green.
5s
1
º
2
´
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RS 160
Associating other Kleer compatible headphones to the transmitter
The following describes how to associate the Sennheiser MX W1
earphones to the TR 160 transmitter.
For information on how to associate other Kleer compatible headphones to
the transmitter, refer to the instruction manual of the corresponding prod-
uct.
̈ Press the operation/pairing button on both MX W1 earphones for
7 seconds.
̈ Press the multi-function button ቢ of the transmitter for 7 seconds.
7s
1
2
After approx. 30 seconds, the MX W1 earphones are paired with the
transmitter and you can hear your sound source via the earphones. The
multi-function LED ባ of the transmitter flashes green.
5s
Associating several headphones to the transmitter
In order to be able to use several headphones simultaneously, you first
have to associate your additional headphones to the transmitter.
Follow the steps in the previous chapter “Associating the headphones
to the transmitter” on page 23.
You can then only use the last headphones paired to listen to your
sound source (single-user operation).
To listen to your sound source with up to 4 headphones simultaneously:
̈ Set your transmitter to multi-user operation as described in the next
chapter.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RS 160
Listening with several headphones simultaneously
By default, the transmitter is set to single-user operation. In order to be
able to listen to your sound source with several headphones
simultaneously, you have to set your transmitter to multi-user operation.
̈ Make sure that all headphones are paired to the transmitter (see
previous chapter).
̈ Switch all headphones on (see page 20).
̈ Then switch the transmitter on (see page 18).
̈ Briefly press the multi-function button ቢ of the transmitter.
The multi-function LED ባ of the transmitter and the multi-function
LEDs º of the headphones flash green. You can now listen to your
sound source with several headphones simultaneously.
5s
When pressing the transmitter’s multi-function button ቢ in
multi-user operation, the transmitter switches to single-user
operation. You can still listen to your sound source with the last
headphones paired, the other headphones are disconnected from
the transmitter.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the RS 160
Cleaning the RS 160
CAUTION Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a
short-circuit and damage the electronics.
̈ Keep all liquids far away from the product.
̈ Do not use any cleansing agents or solvents.
̈ Before cleaning, switch the product off and disconnect the transmitter
from the mains.
̈ Only use a dry and soft cloth to clean the product.
Replacing the ear pads
For reasons of hygiene, you should replace the earpads from time to time.
Spare earpads are available from your Sennheiser dealer (see “Accessoires
and spare parts” on page 30).
̈ Remove the ear pads · from the ear cups by turning the ear pads in
the direction of the arrow until you overcome a slight resistance.
̈ Lift the ear pads · off the ear cups.
·
·
̈ Secure the new ear pads to the ear cups.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
If a problem occurs ...
If a problem occurs ...
Sound problems
Problem
Possible cause
Possible solutions
Page
No sound
Transmitteris/headphones Switch the
18/20
are switched off
transmitter/
headphones on
Headphones are muted
Cancel the muting
12
12
Jack plug is not properly
connected
Check the plug
connection
Sound source is switched
off
Switch the sound
source on
–
Audio cable is defective
Replace the cable
–
Transmission between
transmitter and
headphones is disturbed
by interferences (including
ESD) in the vicinity
Associate the
headphones with the
transmitter again
23
Disconnect the
transmitter from the
mains and reconnect
it again
13
15
23
12
12
Remove the
rechargeable
batteries and
reinsert them again
Headphones are not
Associate the
headphones with the
transmitter
correctly associated with
the transmitter (e.g.
additional headphones)
Occasional Headphones are out of
Reduce the distance
between
headphones and
transmitter
sound
dropouts
range
Signal is shielded
Remove obstacles
between transmitter
and headphones
Interfering devices in the
vicinity
Change your position
12
–
Sound is too Volume of the sound
Increase the volume
low
source is adjusted too low of the sound source
Signal of the sound source Turn the
21
is too weak
VOLUME control ቦ
on the transmitter
clockwise
Headphone volume is
adjusted too low
Increase the volume
by pressing the
21
VOLUME + button ¿
28
Download from Www.Somanuals.com. All Manuals Search And Download.
If a problem occurs ...
Problem
Possible cause
Possible solutions
Page
Sound only Audio cable is defective
on one ear
Replace the audio
cable
–
Audio cable is not properly Check the plug
connected connection
Signal of the sound source Reduce the volume
12
–
Sound is
distorted
is distorted
of the sound source
Reduce the volume
by pressing the
21
VOLUME – button ²
on the headphones
Multi-
Signal of the sound source Turn the
is too strong VOLUME control ቦ
22
22
function
LED ባ on
the trans-
mitter
flashes or
lights up
red
on the transmitter
counter-clockwise
Reduce the volume
of the sound source
Other problems
Problem
Possible cause
No mains connection
Possible solution
Page
The
Check the connection
of the power supply
unit to the
transmitter and to
the mains
13
transmitter
cannot be
switched on
Headphone Rechargeable batteries are Recharge the
16
15
s cannot be flat
switched on
rechargeable
batteries
Rechargeable batteries are Remove the
inserted the wrong way
round
rechargeable
batteries and
reinsert them again.
Observe correct
polarity
Operating
time
decreases
Rechargeable batteries are Replace the
14/15
exhausted
rechargeable
batteries
If a problem occurs that is not listed in the above table or if the problem
cannot be solved with the proposed solutions, please contact your local
Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories and spare part
Accessories and spare part
Only use original Sennheiser accessories and spare parts, otherwise the
product quality can be impaired or the product can be damaged.
Cat. No.
504250
534480
534486
534479
Accessory/spare part
HDR 160 headphones
Power supply unit with country adapters
Stereo audio cable with two 3.5 mm jack plugs (2 m)
DC cable
(4.0 mm DC jack socket to 2 x 4.0 mm DC plug)
093778
514267
534470
Adapter
(3.5 mm jack socket to ¼“ (6.3 mm) jack plug)
Adapter
(3.5 mm jack socket to 2 RCA plugs)
1 pair of ear pads (closed type)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
RS 160 system
Modulation
MSK digital
Carrier frequencies
Range
2.4 – 2.48 GHz
approx. 20 m in the open area
32 °F to 104 °F (0 °C to 40 °C)
Ambient temperature
TR 160 transmitter
Audio connection
3.5 mm stereo jack socket
< 0.3 W
Power consumption
(standby mode)
Power supply
5 V , 500 mA
2 AA size batteries, 1.5 V or
2 AA size NiMH rechargeable batteries,
1.2 V, at least 1,300 mAh
Transmission power
< 2.5 mW
Operating time with batteries approx. 120 hours
Weight (w/o batteries)
Dimensions
approx. 56 g
8.7 cm x 9.7 cm x 2.7 cm
HDR 160 headphones
Transducer principle
Max. SPL
circumaural, closed
106 dB (SPL)
THD
< 0.5 % at 1 kHz, 100 dB SPL
18 Hz – 21,000 Hz
approx. 16 hours
Frequency response
Charging time of
rechargeable batteries
Power supply
2 AAA size NiMH rechargeable batteries,
1.2 V, 600 mAh
Operating time
approx. 24 hours
approx. 226 g
Weight
(w/o rechargeable batteries)
SSA-4P 5050F power supply unit
Rated input
100 – 240 V~, 0.2 A, 50 – 60 Hz
5 V , 500 mA
Rated output
Operating temperature range 32 °F to 104 °F (0 °C to 40 °C)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer declarations
Manufacturer declarations
Warranty
Sennheiser GmbH & Co. KG gives a warranty of 24 months on this product.
For the current warranty conditions, please visit our website at
In compliance with the following requirements
•
•
•
RoHS Directive (2002/95/EC)
WEEE Directive (2002/96/EC)
Battery Directive (2006/66/EC)
CE Declaration of Conformity
•
•
•
R&TTE Directive (1999/5/EC)
EMC Directive (2004/108/EC)
Low Voltage Directive (2006/95/EC)
Before putting the product into operation, please observe the respective
country-specific regulations!
Rechargeable batteries
The supplied rechargeable batteries can be recycled.
Please dispose of them as special waste or return them to your specialist
dealer. In order to protect the environment, only dispose of exhausted
batteries.
WEEE Declaration
Your Sennheiser product was developed and manufactured with high-
quality materials and components which can be recycled and/or reused.
This symbol indicates that electrical and electronic equipment must be
disposed of separately from normal waste at the end of its operational
lifetime.
Please dispose of this product by taking it to your local collection point or
recycling centre for such equipment. This will help to protect the
environment in which we all live.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer declarations
Statements regarding FCC and Industry Canada
FCC Declaration of Conformity (DoC)
SENNHEISER
Model No: RS 160
Sennheiser Electronic Corporation
Strat. Marketing • Stefanie Reichert
One Enterprise Drive • Old Lyme •
CT 06371 • USA
We,
Tel: +1 (860) 434 9190, ext. 144
Fax: +1 (860) 434 1759
declare the above device comply with the requirements of Federal Communications Commission.
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: John Falcone
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus complies with the Canadian ICES-003.
Changes or modifications made to this equipment not expressly approved
by Sennheiser electronic Corp. may void the FCC authorization to operate
this equipment.
RF Radiation Exposure Information
Since the radiated output power of this device is far below the FCC radio
frequency exposure limits, it is not subjected to routine RF exposure
evaluation as per Section 2.1093 of the FCC rules.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer declarations
In compliance with:
USA
FCC ID: DMOTR160
FCC ID: DMOHDR160
Canada
Europe
IC: 2099A-TR160
IC: 2099A-HDR160
Australia/
New Zealand
Singapore
Trademarks
The Kleer logo is a trademark of Kleer Inc.
About ENERGY STAR
ENERGY STAR is a joint program of the U.S. Environmental Protection
Agency and the U.S. Department of Energy helping us all save money and
protect the environment.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
|