Sanyo Security Camera VCC P7575P User Guide

1/4” Color CCD  
Indoor Mini Dome Camera  
VCC-P7575PA  
VCC-P7575P  
(Options Available)  
VCC-P7575PA  
Built-in x2.6 Motorized Zoom  
Pan-Focus Lens  
(f = 2.8–7.3mm) No focus adjustments  
520-TVL Resolution  
Network/UTP Video  
Transmission Connectivity  
(With board options for VCC-P7575PA)  
Remote Camera Setting  
by VAC-70  
Pan-focus lens image  
Varifocal lens image  
The product introduced here is manufactured in Japan  
utilizing advanced technologies and quality control.  
Comparative images are representations only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
nce and compatibility  
environments  
Installation, setup and operation  
made easy by simple,  
user-friendly design  
Easy interior access  
and setup  
Based on a development concept featuring  
a pan-focus lens for the realization of ad-  
vanced surveillance functions together with  
enhanced operability and ease of installa-  
tion. The VCC-P7575P and VCC-P7575PA  
increase lens function and camera maneuv-  
erability to simplify operation, save resour-  
ces spent in installation and substantially  
heighten the available degree of freedom.  
The camera unit and bottom cover can  
be detached very simply. Moreover, easy  
attachment and detachment of the bottom  
cover to and from the base plate for  
installation to a ceiling or wall simplifies set-  
up and camera angle adjustment at the  
point of surveillance.  
VCC-P7575PA  
Push  
Easy  
access  
& setup  
On-screen setup and  
adjustment after installation  
Fine-tuning of zoom ratio and video  
settings, etc. can be made while view-  
ing a monitor screen when connected to  
the VAC-70 controller (sold separately).  
Saves labor during installation and allows a  
flexible response to  
Bottom  
cover  
Backside  
Base plate  
changes arising after  
operation has been  
initiated.  
Ceiling  
Video coaxial cable  
Easy  
access  
& setup  
AC or DC Power Source Operation  
The VCC-P7575P and VCC-P7575PA can  
operate on either 12 V DC (12–15V DC) or  
24 V AC (50 Hz, and even at a tolerance of  
±10%). Switching to the correct mode  
occurs automatically when power is  
supplied.  
After fastening the base plate at the point of  
surveillance, installation is completed by simply  
snapping on the bottom cover and the camera unit.  
VAC-70  
Monitor  
Network Recorder  
VA-SW3050  
Sold separately as optional  
software.  
Specifications  
Board options for even greater  
functionality with the VCC-P7575PA  
Compression  
JPEG  
Picture resolution  
720 x 286 / 640 x 480 / 360 x 286 / 180 x 143 pixels  
Picture quality  
5 levels (Basic, Normal, Enhanced, Fine, Super Fine)  
Frame rate  
Max. 25 IPS (720 x 286)  
Network protocols  
TCP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP  
Number of simultaneous log-in users  
Up to 16 users (admin: only by one person)  
System requirements  
VA-50LAN  
Network board  
Expansion board for connection to a network  
configured with VDC-DP7585P or VCC-  
P7575PA. Enables networked operation of  
cameras from a computer via a web browser  
(Internet Explorer only).  
Bundled with VA-SW3050LITE  
(viewer software).  
Computer: IBM PC/AT and compatible machines  
OS: Windows® 2000 Professional SP4  
Windows® Home SP2 / Windows® XP Professional SP2  
CPU/Memory:  
VA-50ST  
SSP + Twisted pair board  
Coaxial control: SSP/H-SSP/PELCO-C  
RS485: SSP/PELCO-D  
4 cameras connected CPU: Pentium®  
Memory: 512MB or more  
I
2.0GHz or higher  
Dedicated software for recording, playback  
and monitoring of video feeds from a multi-  
plicity of surveillance cameras.  
5–16 cameras connected CPU: Pentium®  
I
3.0GHz or higher  
Twisted pair terminal (CAT5) for video signal:  
NVT built-in UTP video  
Memory: 1GB or more  
Interface: 100Base-TX  
Display card: 1,024 x 768 pixels, more than 16,000,000  
colors or 24-bit color, PCI Express graphics card or AGP  
graphics card with support for hardware overlay  
(Latest version of DirectX® driver, DirectX9.0c, required)  
Note: Images produced by the camera may differ slightly from those appearing here.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCC-P7575PA/P7575P  
Specifications  
Dimensions  
Model No.  
VCC-P7575PA (Options Available)  
VCC-P7575P  
Scanning system  
Image sensor  
Number of pixels  
Horizontal resolution  
PAL standard 625 lines, 50 fields/sec.  
1/4” Interline transfer method CCD (3.6 x 2.7 mm)  
Total: 759 (H) x 596 (V), Effective: 752 (H) x 582 (V)  
More than 520 TV lines  
0.76 lx (F1.9, Gain High)  
1.9 lx (F1.9, Gain High)  
20 IRE  
50 IRE  
Minimum illumination  
(approx.)  
Video output  
1.0 Vp-p/75 ohms, composite  
Video S/N ratio  
Backlight compensation  
White balance  
Gain control  
More than 50 dB (AGC Off)  
150.6 (6.0)  
ON (multi-spot metering [High/Normal], center-zone metering) / OFF  
ATW / AWC / Manual (MWB) / Outdoor (3200) / Indoor (5600) / Fluorescent (FLUO)  
High / Normal / Off  
Gamma  
0.45 / 1  
Lens  
Built-in motorized zoom pan-focus auto iris lens, f=2.8–7.3 mm (x2.6), F1.9 –3.0  
1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.  
On / Off: Motion zoom function  
Electronic shutter  
Motion detector  
Privacy masking  
Alarm input  
On / Off: Max. 4 masked locations  
1 (NO / NC), with alarm zoom function  
ø99.8 (4.0)  
VCC-P7575PA  
Character display  
Synchronizing system  
Aperture compensation  
On / Off, Camera ID max. 16 characters, adjusting position  
Internal synchronization / Line lock  
ø150.6 (6.0)  
High plus / High / Normal / Off  
Temperature: –10 to +50°C (+14 to +122°F), Humidity: within 90% RH  
Temperature: –20 to +70°C (4 to +158°F), Humidity: within 70% RH  
12–15V DC / 24V AC ±10%, 50 Hz  
Operating  
Storage  
Environmental  
conditions  
Power supply  
Power consumption (approx.)  
Dimensions (Dia. x H)  
Weight (approx.)  
3.5 W [without option]  
9.5 W [with option]  
ø150.6 x 115.5 mm  
(ø6.0 x 4.5 in.)  
600 g (1.32 lbs.) [without options]  
3.5 W  
ø99.8 (4.0)  
ø150.6 x 103.5 mm  
(ø6.0 x 4.2 in.)  
585 g (1.29 lbs.)  
VCC-P7575P  
Option Boards Mountable in the VCC-P7575PA  
Network board  
VA-50LAN  
Bandwidth limit: No limit / 128 Kbps to 4 Mbps  
Alarm buffer: 8 MB max., adjustable  
Interface: 10BASE-T / 100BASE-TX RJ45 terminals, links shown by OSD  
SSP + Twisted pair board  
VA-50ST  
Communication protocol:  
Coaxial control: SSP/H-SSP/PELCO-C  
RS485: SSP/PELCO-D  
83.4 (3.3)  
Video out: Coaxial cable / Category 5 LAN cable (NVT built-in UTP video)  
[Unit: mm (inch)]  
VA-SW3050LITE Viewer Software (Bundled with VA-50LAN)  
Optional Dome Cover  
Compression  
Picture resolution  
Picture quality  
Frame rate  
Network protocols  
System requirements  
Computer  
JPEG  
720 x 286 / 640 x 480 / 360 x 286 / 180 x 143 pixels  
5 levels (Basic, Normal, Enhanced, Fine, Super Fine)  
Max. 25 IPS (720 x 286)  
VCZ-50  
Smoked type  
TCP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP  
NOTE:  
IBM PC/AT and compatible machines  
Specifications subject to change without notice.  
OS  
Windows® 2000 Professional SP4 / Windows® Home SP2 / Windows® XP Professional SP2  
“IBM” and “IBM PC/AT” are trademarks of  
International Business Machines Corporation in  
the U.S.A.  
“NVT” is a trademark of Network Video  
Technologies, Inc.  
“Windows,” “DirectX” and “Internet Explorer”  
are registered trademarks of Microsoft  
Corporation in the U.S.A. and other countries.  
“Pentium” is a registered trademark of Intel  
Corporation or its subsidiaries in the U.S.A. and  
other countries.  
• All other brand, product and company names  
are trademarks or registered trademarks of their  
respective holders.  
CPU/Memory  
4 cameras connected CPU: Pentium® I 2.0GHz or higher  
Memory: 512MB or more  
5–16 cameras connected CPU: Pentium® I 3.0GHz or higher  
Memory: 1GB or more  
Interface  
Display card  
100Base-TX  
1,024 x 768 pixels, more than 16,000,000 colors or 24-bit color, PCI Express graphics card  
or AGP graphics card with support for hardware overlay  
(Latest version of DirectX® driver, DirectX9.0c, required)  
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.  
DI Company of SANYO Electric Co., Ltd.  
obtained Quality Management System  
ISO 9001 and Environmental Management  
System ISO 14001 certifications.  
051  
EC00J0303  
Distributed by:  
SANYO Electric Co., Ltd.  
©2006 SANYO Printed in Japan ’06.4. MA.  
SMS122  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA CRT Television 27R430T User Guide
RCA CRT Television MR29410 User Guide
RCA Telephone 27600 User Guide
RCA VCR VR636HF User Guide
Royal Sovereign Air Conditioner ARP 2412 User Guide
SanDisk Camera Accessories 80 11 00893 User Guide
SanDisk Network Card Type I II PCI e Interface Cards User Guide
Sanyo Flat Panel Television 263 User Guide
Sears Treadmill 831247330 User Guide
SECO LARM USA Digital Camera EV 132C DLW6Q User Guide