Sanyo Flat Panel Television CE52SR1 User Guide

Instruction Manual

Manuel d'utilisation

Manual de instrucciones

CE52SR1

LCD Monitor

Moniteur d'affichage à cristaux liquides

Monitor de LCD

English

Page

2~15

F Français

Español

16~28

29 41

Página

Please read this Instruction book before using your LCD monitor. We wish you many hours of pleasure from your new LCD monitor.

Veuillez lire attentivement ce mode d’emploi avant d’utiliser votre moniteur d’affichage à cristaux liquides. Nous espérons que votre

nouveau dispositif d'affichage vous procurera de nombreux instants de bonheur.

Lea este manual de instrucciones antes de usar su nuevo monitor. Deseamos que disfrute de él muchas horas.

Download from Www.Somanuals.com. All Manuals Search And Download.

SERVICING

Servicing

Your monitor is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage

objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively

use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare

parts can prevent fire, shock and other hazards.

Unplug the LCD monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

I If the power cord or plug is damaged.

I If liquid has been spilt in to the LCD monitor.

I If the LCD monitor has been dropped or the cabinet has been damaged.

I If the LCD monitor exhibits a distinct change in performance.

I If the LCD monitor does not operate normally by following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will

often require extensive work by a qualified technician to restore the monitor to normal operation.

Important recycling information.

Your SANYO product is designed and

manufactured with high quality materials and

components which can be recycled and reused.

This symbol means that electrical and electronic

equipment, at their end-of-life, should be

disposed of separately.

In the European Union there are separate

collection systems for used electrical and

electronic products.

Please help us to conserve the environment we live in!

Note: This symbol mark and recycle system are applied only to

EU countries are not applied to other countries of the

world.

Download from Www.Somanuals.com. All Manuals Search And Download.

Declaration of Conformity: North America and Canada

Model Number

Trade name

: CE52SR1

: Sanyo

Responsible party

Address

Telephone

: SANYO FISHER COMPANY

: 21605 Plummer Street, Chatsworth, California 91311

: (818) 998-7322

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interence that may cause undesired operation.

AC Power Cord Requirement

The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you

purchase it.

AC Power Cord for the United States and Canada:

GROUND

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard

Association (CSA).

AC Power Cord has a grounding-type AC line plug. This is a safety feature to make sure that the plug will fit into the power outlet. Do not try to

defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE

ꢀ reverse-engineer, decompile or disassemble the Software;

End-User License

The product (meaning the equipment or appliance to which this

ꢀ make the Software (or any part of it) available, or permit its

redistribution, for use with any computer hardware other than

documentation relates) incorporates Software (the software

the Product; or rent, lease, gift, loan, sell, distribute or transfer

applications, utilities and modules embedded within the Product)

possession of the whole or any part of the Software.

which is owned by Sanyo or its licensors. Before using the product,

please read the End-User License Conditions detailed below. If you

do not agree to the terms and conditions of the End-User License,

Termination

Please do not proceed to use the Product- repack the Product

unused and return it to your supplier together with proof of purchase

for a full refund. By using the product, you agree to be bound by the

terms and conditions of the End-User License.

This license is effective until terminated. This license will terminate

automatically without notice if you fail to comply with any of its

provisions.

Disclaimer

License Grant, Conditions and restrictions

1. The Software is(to the extent permitted by law) supplied ‘as is’ and

SANYO and its suppliers expressly exclude all warranties, express

or implied, including (but not limited to) warranties of satisfactory

quality, fitness for purpose and non-infringement (save to the

extent that the same are not capable of exclusion at law).

1. Sanyo grants you a non-exclusive, world-wide (subject to export

controls), non-transferable (except as permitted by 2 below),

royalty-free license to use the Software upon and with the Product.

2. You may not transfer any of your license rights in the Software

without the prior written consent of SANYO and if consent is

provided then the Software shall only be transferred in conjunction

with the transfer of the Product AND provided that the transferee

has read and agreed to accept the terms and conditions of this

license.

2. In no circumstances will SANYO be liable for any direct, indirect,

consequential, or incidental damage (including loss of profits,

business interruption, loss of data or the cost of procurement of

substitute goods, technology or services) arising out of the use or

the inability to use the Software (save to the extent that such

liability is not capable of exclusion at law).

3. You must ensure that the copyright, trademark and other protective

notices contained in the Software are maintained and not altered

or removed.

General

1. This End-User License will be governed by laws of England and

the User may only bring claims in the English Courts and SANYO

shall be entitled to bring a claim in the courts of any jurisdiction.

4. The Software provided hereunder is copyrighted and licensed (not

sold). SANYO especially does not transfer title or and ownership

rights in the Software to you. The Software provided hereunder

may contain or be derived from portions of materials provided to

SANYO under license by a third party supplier.

2.This End-User License is governed by the laws of the State of

California. The End-User and Sanyo agree that any action to

enforce or interpret the terms of this End-User License shall be

brought only in the appropriate state or federal court located in Los

Angeles County, California.The End-User and Sanyo hereby

submit to the exclusive jurisdiction and venue of such court.

5. Except as expressly permitted by statute you may not;

ꢀ use the Software in conjunction with any other computer

hardware other than the product;

3. The above terms and conditions supersede any prior agreement,

oral or written, between you and SANYO relating to the Software.

ꢀ copy all or part of the Software;

ꢀ incorporate all (or any of) the Software into other programs

developed by (or on behalf of) you and/or used by you;

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Step : 1 Mains Connection

I Connect the display unit to VGA, BNC and Scart connector as

required.

AV2-IN

LD-Net

N5VW

1. Connect the in-line power connector to the Mains Inlet as shown

above.

4. AV3

Composite (CVBS) signal input

AV3 OUT is to output the composite video signal from the VIDEO IN

so that you can connect monitors with the use of a loop through

function.

2. Connect the power cord of the LCD monitor to a suitable wall

outlet.

i As this product does not have a mains On/Off switch, please

5. DVI-D (Digital Video Interface)

ensure your mains plug is easily accessible.

This monitor has a DVI connector. This is located at the back of the

monitor next to the phono sockets. This input will support a large

range of resolutions as shown on page 14. See page 7 for details of

menu operation.

i The LCD monitor is prepared for a mains voltage AC100~240V,

50Hz/ 60Hz. To completely switch off the mains, or when the

display unit is not to be used for an extended period of time, it is

advisable to disconnect the power cord from the power outlet.

AV2-IN

6. PC connection

This LCD monitor has a PC connector (PC-IN D-SUB). You can

connect a PC to the LCD monitor and use it as a monitor display (see

page 9). This input will support a large range of resolutions (see page

14). Audio can be connected via the 3.5mm PC audio in socket.

AC Mains Outlet

7. LD Net IN: Has the ability for LD-NET to be connected to

control the monitor using a network.

8. External Audio Output

To output the audio signal from AV1, AV2, AV3, PC and DVI. The

speaker impedance should be 8 ohms.

iPlease use the correct mains lead supplied with the set for your

3. ^aW^rea^arn^.ing: To prevent injury, the unit must be securely attached to

the wall in accordance with the installation instructions.

WARNING! High voltages are used in the operation of

this set. Refer service to qualified service personnel.

Step : 2 Connections

I INPUT selection

To switch between AV1, RGB, AV2, AV3, PC, DVI or Network press

the INPUT button on your remote control repeatedly.

9. Use of Monitor Audio Output Connections

The audio monitor out sockets on the rear of the set provide a fixed

level audio output for reproducing sound via your audio equipment.

1. AV1

SCART connection / CVBS / RGB / S-VIDEO.

2. RGB

TTL input (5V RGB signals) into SCART terminal

3. Y,Pb,Pr/ RGBHV connection (AV2)

AV2-IN

This LCD monitor has a choice of Y, Pb, Pr or RGB H/V connections.

You can connect your DVD player to the Y, Pb, Pr terminals instead

of using a scart lead. This can support high definition in analogue

component form. RGB H/V can be used as a PC input via the BNC

terminals.Both options support a large range of resolutions (page 15).

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL

Input

Standby

To switch input source from AV1, RGB, AV2, AV3, PC, DVI or

Network mode.

To switch the monitor on and off. Also see page 7.

Recall

To display input selection information and the Time set.

You can also select colour systems in AV1 / AV3 mode as

follows: AUTO-> PAL -> SECAM -> NTSC -> NTSC4.43 ->

PAL M ->PAL N.

It can also be automatically adjusted in PC mode by pressing

this button for twice .

Wide

To select the screen mode Full, Full All, Zoom 16:9,

Title in 16:9, Zoom 14:9, Title in 14:9, Normal or Natural

wide,.

Refer to page 11.

Back

Used to return to the previous menu.

To enter and exit the main menu, and sub menu.

Up and Down

To select the next or previous item.

Level Up/Down

To adjust the sound volume level or enter sub menus

F/OK

Sound Mute

To mute the sound from the speakers.

The sound changes as follows : Normal volume <-> Mute

To confirm the initial setting in the menu.

Picture mode selector

Press the -> <- button repeatedly to select the following

Bass Expander

picture mode.

Personal-Personal preference mode.

Standard-Normal viewing mode.

Dynamic-Suitable for brightly lit rooms.

Soft- Low contrast setting

To get an emphasised bass sound ON or OFF.

TXT/TV

To select Teletext mode.

Eco-Suitable for dimly lit rooms and gives a cinema-like

effect.

Main/Sub Picture Swap

To swap Main and Sub picture.

Freeze

To switch picture still on or off.

ON/OFF

To switch OFF ->PIP(1) ->PIP(2) ->POP mode in turn.

Green

Refer to page 12.

Press this button for more than 5 seconds, installation

mode will appear.

FOR EU USERS

Remote control battery installation

The symbol mark and recycling systems described

below apply to EU countries and do not apply to

countries in other areas of the world.

Your SANYO product is designed and manufactured

with high quality materials and components which

can be recycled and/or reused.

The symbol mark means that electrical and electronic equip-

ment, batteries and accumulators, at their end-of-life, should be

disposed of separately from your household waste.

In the European Union there are separate collection systems

for used electrical and electronic equipment, batteries and

accumulators.

Please, dispose of them correctly at your local community

waste collection/recycling centre.

Please, help us to conserve the environment we live in!

Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the

batteries match the "+" and "-" marks inside the unit into the remote

control handset.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Controls and Menus

Menu Operation

Many of your monitors functions are controlled through the menu

function, using the remote control.

Picture

Brightness

Contrast

Color

Tint (only if NTSC equipment is detected)

Sharpness

White Tone

White Tone / R / G / B

Advanced Setting

DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode

Sound

Time

Treble

Bass

Balance

On / Off

Bass Expander

Current Weekday

Current Time

Schedule

Weekday

Time

1 - 20

Action

Power On / Power Off

On Program

AV1 / RGB / AV2 / AV3 / PC / DVI

On / Off

Active

Setup Menu Setup

Language / H/V-Position / Duration / Transparence

PIP / POP Setup

PIP/POP Mode / Main/Sub Source / PIP Position

Initial Settings

Text Language

Tile Mode

Western / Eastern / Russian / Arabic / Farsi

Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment

RGBHV / YPbPr

AV2 Setting

Native Resolution

PC Power save

XGA / WXGA 1366x768

On / Off

PC Adj. Auto Adjust

H-Position

V-Position

Clock

1. The LCD display has a Standby light to show there is power.

Phase

Switching into/from standby mode

The Standby mode is used for switching the LCD monitor off for

short periods of time. In standby mode the monitor is switched

off but is still receiving mains power.

During menu operation the bottom of the on screen display will show

which controls can be used for menu navigation.

Press the MENU button to enter the main menu. Whenever main

menu is accessed initially, PICTURE will be the default selection.

ꢀ To turn the monitor into standby mode, press the 4 button.

The blue power indicator illuminates more brightly.

A sub menu is selected using the 5 or 6 button and pressing

the 1 or 2 button when the required sub menu is highlighted.

When you have finished you can press the BACK button to return to

the previous menu, press the MENU button to exit the menu

operation.

ꢀ To turn the monitor ON from standby mode, press the 4

button again.

If you find the power indicator flashing, disconnect

power cord from the power outlet and contact our

Service desk.

This warning is a sign to let you know that the power

protection function of this TV set is now operating.

2. Control buttons (bottom corner of back cover)

Picture menu

Menu button: Used to display or cancel main menu.

1. Press the MENU button. PICTURE will be the default selection.

Press the 1 or 2 button to enter.

Set the picture settings for your “personal” preference.

Input/

button: Switch between AV1, RGB, AV2, AV3, PC , DVI

or Network mode. It is also used to provide sub menu selection from

the Main Menu.

1 or 2buttons: provide up and down adjustments.

2. Use the 5 or 6 button to select eg. Brightness and the 1

4 button: To switch to standby mode (to switch off completely

or 2 button to adjust levels.

disconnect the monitor from the power supply).

I White Tone

May be used to adjust the color tone of the picture. Use the 5 or

button to select White Tone and press the 1 or 2 but-

ton to enter the sub menu. You can select Personal, Cool,

Standard or Warm settings by using the 1 or 2 button. To

adjust the color tone of the picture by using the 5 or 6 button to

select Red(R), Green(G) or Blue(B) and the 1 or 2 button

to adjust levels. These settings will be stored in personal mode

automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU OPERATION

I Current Weekday

Use to set current weekday using the 1 or 2 button.

Picture menu

I Advanced settings

Use the 5 or 6 button to select Advanced settings and press

the 1 or 2 button to enter the sub menu as follows.

I Current Time

Use to set the current time using the Numeric buttons.

i Other items in Time Menu should not be selected until Current

Time has been set.

I Schedule

Use to set up to 20 separate time schedules, select 1 - 20 using the

1 or 2 button.

I Weekday

Use to set any weekday from Sunday through to Saturday or

Everyday using the 1 or 2 button.

I Time

Use to set any time using the Numeric buttons.

DCDi(Directional Correlational Deinterlacing) is used to process

moving angled edge in deinterlacing to get the smoothest and most

natural image. Press the 1 or 2 button on the remote control

to select On or Off.

I Action

Use to set “Power On” or “Power Off” using the 1 or 2 button.

I On Program

ACC/ACM(ACC: Adaptive Contrast and Color; ACM-II: Active Color

Management-II) is used to select adaptive Brightness, Contrast and

tone control. Press the 1 or 2 button on the remote control to

select suitable mode either Vivid, Cinema, Sport or Off.

Use to select AV1, RGB, AV2, AV3, PC, DVI or Network using the

1 or 2 button.

I Active

Use to select ON or OFF using the 1 or 2 button. When set

“OFF” the above items “Schedule”, “Weekday”, “Time”, “Action” or

“ON Program” will be inactive.

Use NUMERIC buttons [0-9] to set On Time. (Action “Power On” -

00:00~23:59)

CCS(Cross Color Separation) is used to remove residual chroma

information from luminance signal which is the result of imperfect

decoding of composite video. Press the 1 or 2 button on the

remote control to select either Auto, Standard or Off.

Once On Time has been set, when the set time is reached, the

monitor will leave the stand-by status and enter to the source

automatically.

After On Time has been set, you can go on watching other

programs. When the set time is reached, the monitor will

automatically switch to the preset program.

DNR(Digital Noise Reduction) is available for noise reduction. Press

the 1 or 2 button on the remote control to select either Auto,

Low, Mid, High or Off.

MPEG NR(MPEG Noise Reduction): Removes unwanted ringing and

block noise from images that have undergone MPEG or JPEG com-

pression and decompression. Press the 1 or 2 button on the

remote control to select On or Off.

i On Program can only be selected whenAction (Power On) has

been set.

i Action (Power Off) can be set to turn the monitor into standby at a

selected time

Film Mode(Inverse 3:2 pulldown): Film vs.Video-Detect film.

Performed on material which underwent technologic conversion to

video. Press the 1 or 2 button on the remote control to select

On or Off.

Once On Program has been set, when the set time is reached, the

monitor will enter to the preset source automatically.

Use the 1 or 2 button to select On program, AV1, RGB,

AV2, AV3, PC, DVI or Network.

Sound menu

Setup menu

Press the MENU button and select Sound using the 5 or 6

buttons, press the 1 or 2 button to enter.

Press the MENU button and select Setup using the 5 or 6

buttons, press the 1 or 2 button to enter. Press the BACK

button to return to the previous menu. Press the MENU button to exit

:M[WT]\QWV

@/)

PC Power Save

Select and adjust to obtain the best sound settings for your

environment using the 5 or 6 button to select Treble, Bass or

Balance and the 1 or 2 button to adjust levels.

Bass Expander can also be selected using the 5 or 6 button

and pressing the 1 or 2 button to select On or Off.

These settings automatically store when you exit the menu.

Press the BACK button to return to the previous menu.

Press the MENU button to exit menu operation.

I Menu Setup

Whenever Setup menu is accessed initially, Menu Setup will be the

default selection. Press the 1 or 2 button to enter the sub menu.

Time menu

Press the MENU button and select Time using the 5 or 6

buttons, press the 1 or 2 button to enter. Press the BACK

button to return to the previous menu. Press the MENU button to exit

menu operation.

Language is used to select the preferred language. Use the 1

or 2 button to select English, French, German, Italian,

Spanish or Dutch.

H-Position changes the OSD position horizontally by using the 1

or 2 button.

Friday

12:17

Current Weekday

Current Time

Schedule

Weekday

Time

Friday

12:03

Power Off

Action

On Program

Active

AV3

V-Position changes the OSD position vertically by using the 1 or

2 button.

Duration is used to set the display time of the MENU by using the

1 or 2 button.(5~120 seconds)

Transparence is used to adjust transparence of menu. Use the 1

or 2 button to adjust levels.

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU OPERATION

I AV2 Setting

Use the 5 or 6 button to select AV2 Setting and press the

1 or 2 button to select YPbPr or RGBHV.

Setup menu

I PIP/POP Setup

Use the 5 or 6 button to select PIP/POP Setup and press the

1 or 2 button to enter the sub menu.

Connect your PC to either PC-IN or RGBHV on the rear of the set.

Once connected select PC mode or AV2 (RGBHV, see page 5 for

AV2 input settings) via the INPUT button on your remote control.

The set will become a monitor for the PC.

I Native Resolution

Use the 5 or 6 button to select Native Resolution and press

the 1 or 2 button to select XGA or WXGA 1366 x 768.

I PC Power Save

Use the 5 or 6 button to select PC Power Save and press the

1 or 2 button to select ON or OFF.

PIP/POP Mode: Using the 1 or 2 button select the most

suitable mode PIP1, PIP2, POP or Off. (Please refer to page 12.)

i When Mode is set to Off, Sub Source and PIP Position will not

work.

Main Source is used to select input source (AV1, RGB, AV2, AV3,

PC, DVI or Network ) for main picture by using the 1 or 2

button.

PC Adj. menu

Press the MENU button and select PC Adj. using the 5 or 6

buttons, press the 1 or 2 button to enter. Press the BACK

button to return to the previous menu. Press the MENU button to exit

menu operation.

Sub Source is used to select input source (AV1, AV2, AV3, PC or

DVI ) for sub picture by using the 1 or 2 button.

i For a combination of main picture and sub picture: only DVI or

Network input can assemble with other input source. For

example, if main source is selected as AV1 input, then the sub

source must be DVI or Network input.

PIP Position: Using the 1 or 2 button it can be selected

Top Left, Top Right, Bottom Right or Bottom Left.

I Initial Settings

This function returns all setting values except for Installation Mode.

Auto Adjust is used to automatically detect incoming signal, and

adjust itself to optimize its performance by using the 1 or 2

button. If the image is not displayed properly, a manual adjustment

is required (Refer to following adjustments).

I Text Language

Use the 5 or 6 button to select Text Language and press the

1 or 2 button to select Western, Eastern, Russian, Arabic or

Farsi.

H-Position is used to move the horizontal picture position by using

the 1 or 2 button.

I Tile Mode

This function allows you to split an image to suit your monitor grid

format to create a video wall.

Use the 5 or 6 button to select Tile Mode and press the 1

or 2 button to enter the sub menu as follows.

Tile Mode Active can be set On or Off using the 1 or 2

button.

V-Position is used to move the vertical picture position by using the

1 or 2 button.

Clock is used to eliminate flicker from the image by using the 1

or 2 button.

Phase is used to eliminate disorder from the image by using the

1 or 2 button.

H_Sets

V_Sets

H_Sets is used to divide the horizonal picture into more than one

part, but the most is 5 parts (5 monitors).

V_Sets is used to divide the vertical picture into more than one part,

and the most is also 5 parts (5 monitors). Using the 1 or 2

button to set.

H Location is used to select one part of the horizonal picture to

display on the current LCD Monitor using the 1 or 2 button.

V Location is used to select one part of the vertical picture to

display on the current LCD Monitor using the 1 or 2 button.

Bezel H Adjustment is used to align the image horizontally with

respect to the other monitors in the video wall to accomodate the

bezel width using the 1 or 2 button. (0~10)

Bezel V Adjustment is used to align the image vertically with

respect to the other monitors in the video wall to accomodate the

bezel width using the 1 or 2 button. (0~10)

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION MODE

I LED Light setting

Installation Mode

Select LED Light setting using the 5 or 6 button, once high-

lighted you can select On or Off by pressing the 1 or 2

button.

Installation Mode

VER -.--

I DCR

Select DCR using the 5 or 6 button, once highlighted you can

select On or Off by pressing the 1 or 2 button.

I Network Initial

This function automatically installs the IP Address, Subnet, Gateway

and DNS information.

I Temperature Error

This function can record times for abnormal temperture.

Network Initial

Temperature Error

>>>

I IP Address / Subnet / Gateway / DNS

These 4 items display the LD-Net information. If LD-NET is NOT

connected, all the items would be displayed as “000000000000”.

i Disconnecting the mains supply before exiting Installation Mode

will cancel the following features On program, RC inhibition, Address

and Baud Rate.

This LCD monitor allows you to set up the following:

SETTING PROCEDURE

1. Press and hold the GREEN button on the remote control for 5

seconds. (Installation Mode will appear)

2. Use the 5 or 6 button to highlight each option, use the 1 or

button to adjust each option. Press the MENU button to exit

the mode.

I On Program

Select ON program using the 5 or 6 button, select the start up

position using the 1 or 2 buttons.

(Off/ AV1/ RGB/ AV2/ AV3/ PC/ DVI or Network)

I Max Volume

Select Max volume using the 5 or 6 button, use the 1 or

2 buttons to set the maximum volume required.

I Winter mode

This Function can be activated when the LCD monitor is used during

cold temperature conditions, approximately 38˚F/ 4˚C or below to

maintain picture performance.

Using the 5 or 6 button select winter mode, once highlighted

you can select ON or OFF by pressing the 1 or 2 button.

IMPORTANT: The AC cord should not be disconnected during the

operation of Winter mode function.

When in winter mode, power consumption is higher than normal

standby consumption. This is entirely due to the operation of heating

circuitry. We strongly recommend to turn off Winter mode when the

ambient temperature is above 38˚F/ 4˚C.

I RC inhibition

You can prevent unwanted remote control operation by selecting RC

Inhibition.

Select using the 5 or 6 button. Press the 1 or 2 button

to select On or Off.

To re-instate RC operation press and hold the green button on the

remote control and select RC inhibition OFF.

I Child Lock

You can prevent unwanted operation of the LCD monitor via the

buttons on the rear of the monitor.

Select using the 5 or 6 button. Press the 1 button to select

On or OFF. The ‘Child Lock’ OSD will appear if buttons are pressed

when child lock is On.

i Standby operates normally when childlock is set “On”.

I Address

Set the address for the LCD monitor (0 - 999).

I Baud rate

Select Baud rate using the 5 or 6 button. To set transmission

speed RS232 or LD-NET communication for 19200 or 9600 Baud

rate by pressing the 1 or 2 button.

I Panel Protect

Select Panel Protect using the 5 or 6 button, once highlighted

you can select ON or OFF by pressing the 1 or 2 button.

I AV Auto shut off

Select AV Auto Shut Off using the 5 or 6 button, once high-

lighted you can select On or Off by pressing the 1 or 2

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

Selection of picture size

Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN

16:9, ZOOM 14:9, TITLE IN 14:9, NORMAL or NATURAL WIDE by

pressing the WIDE button repeatedly on the Remote Control.

i When in AV2 (RGBHV) orPC mode FULL or NORMAL can be

selected.

Note: Full - Set display area 100%

i Only in DVI or AV2 (YPbPr) displaying high resolution content

FULL and FULL ALL are selectable.

Note : FULL - Set display area 95%

FULL ALL - Set display area 100%

All other inputs AV1, AV3, DVI or AV2 (YPbPr) (displaying lower

resolutions) can select all picture sizes.

I Full / Full All

I Title In 14:9

4:3

14:9

16:9

Letterbox Video

4:3

14:9

16:9

Letterbox Video

TITLES ON SCREEN

As zoom (14:9), but As zoom (14:9), but As zoom (14:9), but As zoom (14:9), but

The whole screen

is filled stretching

the width.

The whole screen

is filled with the

corrrect picture

ratio.

The black bars top

and bottom are

present and the

height is

The whole screen

is filled stretching

the height slightly

at the edges.

bottom is

compressed even

more to allow

subtitles to be

seen.

compressed even

more to allow

subtitles to be

seen.

compressed even

more to allow

subtitles to be

seen.

compressed even

more to allow

subtitles to be

seen.

compressed.

I Normal

I Zoom 16:9

4:3

14:9

16:9

Letterbox Video

4:3

14:9

16:9

Letterbox Video

The correct ratio is

maintained with

black bars on the

left and right.

Black bars left and Black bars left,

right, picture height right, top and

Black bars left and

right, picture height

is stretched.

The correct picture

width is maintained

but the top and

bottom are

Zooms in slightly

cropping the top

and bottom.

The black bars top

and bottom are

smaller and the

picture height is

compressed slightly.

Zooms in slightly

cropping the top

and bottom.

is stretched.

bottom.

cropped.

I Title in 16:9

I Natural Wide

4:3

14:9

16:9

Letterbox Video

4:3

14:9

16:9

Letterbox Video

TITLES ON SCREEN

As Zoom (16:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

As Zoom (16:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

As Zoom (16:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

As Zoom (16:9),

but bottom is

compressed even

more to allow

subtitles to be

seen.

Stretches the

The height is

expanded to fill the

whole screen.

The picture fills the The black bars top

picture horizontally

to fill the screen.

The picture is more

stretched at the

edges.

screen and is

proportionally

correct.

and bottom remain

and the height is

compressed to fit

the picture area.

I Zoom 14:9

4:3

14:9

16:9

Letterbox Video

The correct picture

width is maintained

but the top and

bottom are

Zooms in slightly

cropping the top

and bottom.

The black bars top

and bottom are

smaller and the

picture height is

compressed slightly.

Zooms in slightly

cropping the top

and bottom.

cropped.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

PIP/POP Operation

Using this function, you can enjoy a DVI or Network program and

an image (AV1, AV2, AV3 or PC input) at the same time.

Press the ON/OFF button on the Remote Control repeatly to select

PIP1, PIP2, POP or OFF mode.

During the PIP/POP mode, press the Main/Sub Picture Swap but-

ton will switch the location for main and sub picture.

i Only the sound on the main picture is heard from the monitor

speaker. The sound on the sub-picture cannot be heard.

i The details for PIP/POP operation (eg,location for sub picture or

input source for any picture,etc.), please refer to page 9.

I PIP2 mode

I PIP1 mode

I POP mode

I OFF mode

The left picture is main picture, the right picture is sub picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION (IN TEXT MODE)

Teletext Operation

Teletext is only available via external sources.

Teletext mode can be operated by the following buttons on the

Remote Control.

i Some buttons have dual functions

TXT/TV

Text Reveal

Press TXT/TV button to select teletext. Press again will display:

AV mode: AV/ TEXT mode/ MIX mode/ AV

Note:

MIX mode: AV (broadcast image) screen and the contents of TEXT

(superimposed) are displayed simultaneously.

CANCEL mode: TEXT/MIX MODE is cancelled temporarily and AV image is

displayed.

Press Text Reveal button to reveal hidden items on the text page.

Some pages such as quiz pages have the answers hidden. The button may

have to be held to keep the answer on the screen, or press again to remove

the answer.

In Reveal OFF, this indication is not given.

Text Reveal button will only work whilst in text mode.

If the signal is removed or disconnected, the monitor will revert to a blue back-

ground with “No signal” message on the screen.

If the TXT/TV button is pressed during the CANCEL mode, the CANCEL mode

will be cancelled, and full text will resume.

Page Up and Down

To select the next or previous page.

Text Subcode

Volume Up/Down

Press this button, “110/. . . .” will be displayed (e.g. the current page is 110).

And press the NUMERIC buttons(0-9) to enter the sub page.

For example, to select sub page 4, press NUMERIC buttons

0-0-0-4, and "110/0004" will be displayed.

To adjust the sound volume level.

When finished, press the text subcode button to return to normal operation.

Text Size

Text Index

Press Text Size button to enlarge the top half of the text page.

Press Text Size button again to enlarge the bottom half of the text page.

Press Text Size button again to return to the normal size page.

(Normal/ top half enlargement/ bottom half enlargement/ normal)

Note:

During the top half or bottom half enlargement mode, if a page request is

performed by [ 0-9 ] numeric buttons or the TEXT INDEX button, it will return

to normal mode and a page will be requested.

If HOLD ON / OFF is performed during the top half enlargement mode, it will

hold the top half enlargement mode. (HOLD symbol will display)

If HOLD ON / OFF is performed during the bottom half enlargement mode, it

will hold the bottom half enlargement mode. (HOLD symbol will NOT display)

Press this button to select one of the teletext index pages in TEXT, MIX or

CANCEL mode.

Text Red

Use to select the red topic or page number at the bottom of the text page.

Text Green

Use to select the green topic or page number at the bottom of the text page.

Text Yellow

Use to select the yellow topic or page number at the bottom of the text page.

Text Blue

Use to select the blue topic or page number at the bottom of the text page.

Text Cancel

Press the TEXT CANCEL button in TEXT or MIX mode, the TV picture appears

on the screen.

Press this button once again or press TXT/TV button, CANCEL mode will be

cancelled.

In CANCEL mode, "CAN" is always displayed on the upper left of the screen.

Text Hold

Press Text Hold button to stop page request and updating.

HOLD ON:

The Hold symbol will appear instead of the page number.

Update of TELETEXT is forbidden. It holds on the current TEXT screen display

now.

HOLD OFF:

The hold symbol is replaced with the page number.

TELETEXT page data is updated.

The present page is re-requested. (header roll)

Text Hold button will only work whilst in TEXT Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS / HELPFUL HINTS

Helpful hints

Specification

I NO PICTURE NO SOUND

ꢀ Check if monitor is plugged in.

ꢀ Check monitor is not in standby mode.

Common specification

Power source

100~240V 50Hz / 60Hz

Colour system

PAL / NTSC / NTSC4.43/ SECAM

I POOR PICTURE

ꢀ Adjust BRIGHTNESS/ CONTRAST LEVELS (too low).

AV terminal

AV1: Scart CENELEC Standard

Input: Composite video, RGB (5V RGB with 5V sync to

pin 14) and audio-L/R

Output: composite video from AV3 and audio L/R

I NO COLOUR, PICTURE OK

ꢀ Adjust COLOUR control.

ꢀ Check lead connections.

ꢀ Does the signal input have colour.

AV2: BNC

Input: RGB, H and V / Y, Pb, Pr and audio L/R

Output: RGB, H and V / Y, Pb, Pr

I REMOTE CONTROL DOES NOT WORK

ꢀ Check batteries are inserted correctly.

ꢀ Check condition of batteries.

AV3: BNC

Input: Composite video

Output : Composite video

ꢀ Check to see if remote control inhibit is set ON.

Audio Monitor Out: CINCH L/R

Audio Speaker Out: 2 x 10W

I PICTURE OK, NO SOUND

ꢀ Check external speakers are connected correctly.

ꢀ Check lead connections to external equipment.

ꢀ Check volume turned down or mute selected.

DVI

Input :

Input:

DVI-D GROUP Standard

Mini D-SUB 15 PIN and

Audio 3.5mm Jack

Serial Port: RS232C: Input / Output

Net Organiser: POA-LN02 (optional)

When ordering these products, give the Name and Type No. to the

sales dealer.

Contrast Ratio

1500:1

Screen(inches/ cm)

(viewing measured

diagonally)

52”/132cm

Display Native Resolution

Viewing angles

Dimensions (WxHxD)

Weight (kg)

1920X1080

H:176°, V:176°

1304 x 800 x 234mm

CE52SR1

1304

1216

1304

1120.6

1152

234

473.9

215.7

233.1

204

176.7

324

280

420

M6 x 10

Wall mount

fixing

61.4

480

516

800

140

648

712

189.4

140

280

420

560

359.4

444.6

Download from Www.Somanuals.com. All Manuals Search And Download.

PC/DVI-D / COMPONENT SIGNAL SUPPORT TIMING LIST

PC signal support timing

orizontal

Vertical

Resolution

Remark

Frequency

(kHz)

Frequency

(Hz)

720_400

640_480

800_600

DOS (VGA)

VGA VESA 60Hz

VGA VESA 75Hz

VGA VESA 72Hz

VGA VESA 85Hz

Mac. 13

31.47

31.43

37.50

37.86

43.27

70.09

59.88

75.00

72.81

85.00

66.67

66.60

35.00

34.97

35.16

37.88

46.875

34.50

38.00

53.67

49.72

48.36

56.47

60.02

48.50

60.31

61.00

68.68

60.24

37.5

Mac LC 13”

56.25

60.32

SVGA VESA 56Hz

SVGA VESA 60Hz

75.00

55.38

60.51

85.06

74.55

60.00

70.07

75.03

60.02

74.92

75.70

85.00

75.08

50.00

60.00

75.025

60.01

59.98

60.01

60.18

SVGA VESA 75Hz

SVGA

SVGA VESA 85Hz

Mac. 16

XGA VESA 60Hz

XGA VESA 70Hz

XGA VESA 75Hz

XGA

XGA VESA 85Hz

MAC_Normal 19”

720p-50Hz

SXGA VESA 60Hz

SXGA VESA 75Hz

800_600

832_624

1024_768

1280_720

1280_960

1280_1024

60.00

79.976

63.370

63.34

63.74

63.79

63.90

81.13

61.20

61.85

71.40

65.35

65.12

68.68

80.00

75.00

48.36

47.73

28.125

33.75

1280_1024

SXGA

1280_1024

1152_900

1400_1050

60.00

76.107

SXGA

65.20

66.00

75.60

60.12

59.90

75.06

75.00

60.00

60.01

60.03

50.00

SXGA

SXGA +

MAC_Normal 21”

Mac ll

UXGA VESA 60Hz

WXGA

1080i-50Hz

1080i-60Hz

1400_1050

1152_870

1280_1024

1600_1200

1366_768

1360_768

1920_1080

60.00

The monitor can be automatically adjusted in pc mode when receiving a standard VESA signal

It will be displayed as XGA when the monitor is receiving a XGA or WXGA signal.

Horizontal

Frequency

(kHz)

31.43

37.86

37.5

34.97

35.16

37.88

46.875

49.72

48.36

60.23

56.47

60.24

68.68

63.98

31.7

Vertical

Frequency

(Hz)

Component signal support timing

Horizontal

(KHz)

Remark

Resolution

Vertical frequency

(Hz)

Remark

Resolution

frequency

640_480

800_600

832_624

1024_768

1152_870

1280_1024

720_480

59.88

VGA VESA 60Hz

VGA VESA 72Hz

VGA VESA 75Hz

MAC LC 13"

72.81

66.6

66.67

56.25

60.32

74.55

75.03

70.07

75.08

75.06

60.02

59.94

MAC_ NORMAL 13"

SVGA VESA 56Hz

SVGA VESA 60Hz

SVGA VESA 75Hz

MAC_ NORMAL 16"

XGA VESA 60Hz

XGA VESA 75Hz

XGA VESA 70Hz

MAC_ NORMAL 19"

MAC_ NORMAL 21"

SXGA VESA 60Hz

480p

768_575

31.25

575p

720_480

59.94

480I

15.73

1280_720

37.5

7205p7-55p0Hz

768_575

31.25

1726880__577250

1455.63

5600

7205p7-56I0Hz

720p-50Hz

1366_768

48.36

WXGA

1280_720

37.5

1360_768

47.7

WXGA

720p-60Hz

1280_720

11932606__1706880

2488.1.3265

6500

108W0Xi-5G0AHz

WXGA

1360_768

47.7

1920_1080

33.75

1080i-60Hz

1920_1080

28.125

33.75

56.25

67.5

1080i-50Hz

1080i-60Hz

HDTV1080p-50Hz

HDTV1080p-60Hz

27.00

28.13

33.75

HDTV1080p-24Hz

HDTV1080p-25Hz

HDTV1080p-30Hz

Download from Www.Somanuals.com. All Manuals Search And Download.

RS232C Command Tables

Functional Execution Command Table

Command

Item

POWER ON

C00

POWER OFF

C01

C24

Wide “Natural” direct

Wide “Zoom 16:9” direct

Wide “Title in 16:9” direct

Wide “Zoom 14:9” direct

Wide “Title in 14:9” direct

Wide “Full” direct

Wide “Normal” direct

AV1 direct

C25

C26

C27

C28

C29

C0F

C70

C71

RGB direct

C72

AV2 RGBHV direct

AV2 YPbPr direct

AV3 direct

C73

C74

C75

DVI direct

PC direct

C76

C64

PC Auto adjust

Factory settings

Power save ON

Power save OFF

Child lock ON

Child lock OFF

RC inhibition OFF

RC inhibition ON

C92

CF PSAVE ON

CF PSAVE OFF

CF CLOK ON

CF CLOK OFF

CF DEA RMCY

CF DEA RMCN

Image control Read Command Table

Status read command

Item

Status of Brightness.

CR BRIGHT

CR CONT

Status of Contrast.

Status of Color.

CR COLOR

CR TINT

Status of Tint.

Sharpness.

CR SHARP

CR WBAL

CR WBAL-R

CR WBAL-G

CR WBAL-B

CR NZRED

CR FILM

Status of White Balance Mode information.

Status of White Balance Red

Status of White Balance Green

Status of White Balance Blue

Status of Noise reduction setting.

Status of Film mode setting.

Status of Image selection.

The same as PICTURE mode

Status of DCDi setting.

Status of ACC/ACM setting.

Status of CCS setting.

CR IMAGE

CR DCDI

CR ACCACM

CR CCS

Status of MPEG NR setting.

CR MPEGNR

PC Read Command Table

Status read command

Item

Status of Horizontal position.

Status of Vertical position.

Status of PHASE value.

CR H-POS

CR V-POS

CR PHASE

Status of CLOCK value.

CR CLOCK

Input Read Command Table

Status read command

Item

Status of Input selection.

Status of Input source mode.

Status of system of Input mode.

CR INPUT

CR SOURCE

CR SYSTEM

Screen Read Command Table

Status read command

Item

Status of screen size The same of WIDE mode

CR SCREEN

Download from Www.Somanuals.com. All Manuals Search And Download.

RS232C Command Tables

Time Read Command Table

Status read command

CR PANELH

Item

Status of accumulated lifetime of panel.

The same as CR_LAMPH Command

Status of accumulated lifetime of monitor

The same as CR_PROJH Command

CR MONH

Sound control Read Command Table

Status read command

Item

Status of volume value.

Status of MUTE.

CR VOLUME

CR MUTE

Setting Read Command Table

Status read command

Item

Status of Language selection.

CR LANG

Status of Power management setting

Status of Tile mode ON/OFF setting

CR P-MANE

CR TILE

Status of Tile mode, the number of Horizontal array.

Status of Tile mode, the number of Vertical array.

Status of Tile mode, the number of Horizontal allocation.

Status of Tile mode the number of Horizontal allocation.

Status of Tile mode, the width of bezel Horizontal

Status of Tile mode, the width of bezel (Vertical)

Status of On Program information/

CR TILE-HSETS

CR TILE-VSETS

CR TILE-HLOCAT

CR TILE-VLOCAT

CR TILE-BZLHADJ

CR TILE-BZLVADJ

CR ONPROG

Status of Winter mode Information.

CR WINTERMODE

CR PANELPROTECT

CR LEDLIGHT

Statuses of Panel protect Information.

Status of LED light Information.

Status of AV auto shut OFF Information.

Statuses of Child lock Information.

CR AVAUTOSHUT

CR CHILDLOCK

CR RCINHIBITION

Status of RC Inhibit Information.