Download from Www.Somanuals.com. All Manuals Search And Download.
1 NETWORK CONTROL FUNCTION
PC control (i.e., remote control) will be possible when this unit is connected to a network.
Camera
DVR (Digital Video Recorder)
Switching hub
Switching hub
LAN cable
10BASE-T/100BASE-TX
Category 5 Straight
1
2
3
4
PC/ATcompatible
machine
Operations possible with PC control
Network settings
z Menu settings, recording, playback, and other similar
operations will be possible from the PC screen.
z Up to a maximum of four PCs can be simultaneously
connected to a single DVR (Digital Video Recorder).
(Example)
z When this unit is being used while connected to a
network, network settings must be made on the unit
itself. See INSTRUCTION MANUAL “Network settings”
for more details.
z TCP/IP settings must be made on the connected PCs
and in accordance with the operating system (OS)
being used on each.
z Users with user level ID1: 3 PCs
z Users with user level ID2 or ID3: 1 PC
z Control of the DVR can be freely switched from the unit
itself to the PC and vice versa. Note that operation of
the unit will not be affected by simply connecting a
cable.
z In order to provide security for computer control, three
types of password are set in accordance with the
different user levels, and this ensures that three
different levels of restrictions can be introduced for
operations. (JP. 23)
z When a pre-existing network is being used, a check
must be carried out by that network’s administrator to
confirm that IP addresses do not coincide with other IP
addresses already in use.
Saving and playing back sound
z The dedicated application DVR Viewer (Ver. 1.5 or
later) must be installed on the system in order to store
or playback audio on a networked PC or to playback
sound-containing video that has been stored on a PC,
CompactFlash card, or the like.
Please download this software from our homepage (see
below).
Sanyo website URL:
2
English
Download from Www.Somanuals.com. All Manuals Search And Download.
1
NETWORK CONTROL FUNCTION
3 Click “Custom Level...”.
Installing DVR Viewer
The “Security Settings” screen is displayed.
(1) Double-click the DVR Viewer’s “Setup.exe” icon in
order to launch the installer.
After several moments, the “InstallShield Wizard” window
will be displayed and installation will start.
When installation has ended, the “Maintenance Complete”
window will be displayed.
(2) Click [Finish].
This completes the DVR Viewer installation procedure.
Setting Internet Options
After installing DVR Viewer, use the following procedure to
make Internet security settings.
1 Select “Internet Options...” from the
Internet Explorer “Tools” menu.
The “Internet Options” window is displayed.
Confirm that “Run ActiveX controls and plug-ins” is set to
“Enable”.
If this is not the case, click “Enable” for “Run ActiveX
controls and plug-ins”, and then make the following
settings.
2 Click the “Security” tab.
The “Security” screen is displayed.
This completes the Internet security setting procedure.
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1
NETWORK CONTROL FUNCTION
5 Click [Properties].
Minimum system requirements
The [General] tab window in the [Internet Protocol (TCP/
Computer: PC/AT compatible machine
IP) Properties] window is displayed.
Operating system: Windows 98/98SE/Me/NT4.0/2000/XP
Browser: Internet Explorer Ver. 5.0 or later
Video: 65,000 colors, resolution 800 x 600 dpi or higher
6 Select [Use the following IP address:]
and then type in the IP address and the
subnet mask.
Recommended specifications
CPU: Pentium® III (500 MHz) or better
RAM: 256 MB minimum
OS: Windows 2000, XP, or later
Audio playback requirements
DirectX or compatible sound card
Speaker
For Windows XP
The following example applies to Windows XP.
Transmission control protocol/Internet protocol (TCP/IP) is
the standard protocol used for Internet and Intranet. If this
unit is to be used when connected to a network, specify a
TCP/IP to suit each operating system for the computer that
is used for the settings.
7 Check the settings, and then click [OK].
The display will return to the [Local Area Connection
1 Click the [Network and Internet
Connections] icon in the [Control
Panel].
Properties] window.
The [Network and Internet Connections] window is
displayed.
8 Click [OK].
This completes the TCP/IP settings.
2 Click [Network Connections].
The [Network Connections] window is displayed, and
the settings for the LAN card (Ethernet adapter) being
used will appear in the [LAN or High-Speed Internet]
column.
z Ask the network administrator for details on IP address,
subnet mask, default gateway, and DNS settings.
3 Right-click on the LAN card (Ethernet
adapter) being used, and then select
[Properties] from the pop-up menu.
The [General] tab window in the [Local Area Connection
Properties] window is displayed.
4 Check that [Internet Protocol (TCP/IP)]
is selected in the list of components
used by the Ethernet board that appears
in the [This connection uses the
following items:] box.
If [Internet Protocol (TCP/IP)] is not selected, select it.
4
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2 PREPARING FOR NETWORK CONTROL
3 Enter a password (for verification
Controlling from a PC
purposes).
1 Launch the PC’s web browser.
Enter a [User name] and a verification-use [Password] on
the [Connect to 192.168.0.1] screen, and then click [OK].
Internet Explorer versions 5.0 and later are supported.
If you entered an incorrect password, the password entry
In terms of OS, Windows 98, 98SE, Me, NT4.0, 2000, and
screen will appear once again and you will be prompted to
XP are supported.
re-input the password.
z If the Java Script run-time error message is displayed
while Internet Explorer is being used, modify that
application’s settings as follows:
(1) Select menus in the sequence [Tools] → [Internet
Options] → [Advanced].
(2) Uncheck “Display a notification about every script
error” from the “Advanced” screen, and check “Disable
script debugging”.
z Passwords should be setup in advance for the
hardware environment's different user levels. At the
time of purchase, the password settings (i.e., user
name and password) will be as described on P. 23.
z If you save the [User name] and [Password] that have
been entered, verification will be carried out
automatically on subsequent occasions, and they will
not need to be entered again. Note, however, that it
may not be possible to save a password other than that
used for the default connection.
z Up to four PCs can be connected simultaneously to a
single DVR. Note, however, that users with user level
ID2 or ID3 are restricted to use of one PC.
z When four PCs are connected and access is made from
a different PC using the highest user level, the most-
recent user of a lower level to have accessed the unit
will be automatically disconnected and priority will be
given to the upper-level user.
2 Enter the URL.
Enter the unit’s URL in the browser’s address bar and then
An error message will appear on the disconnected
user’s PC. (JP. 7)
z When [Cancel] is clicked after repeated input of an
press [Enter]. (Note that the URL should contain the IP
incorrect password, the authentication error message
address specified using the unit’s network settings.)
will be displayed.
z Even if computer control is being carried out, clicking a
button for which you do not have authorization will
result in the password input screen being displayed to
verify allocation of the required user level.
z In the case of certain PC performance levels and
z If a value other than “80” is set as the default port value,
enter a colon (:) and then the port number after the IP
address.
For example, if the port number was set as “81”, you
should enter
specifications, a portion of the video may not be
displayed. If this is the case, go to [Tools]→ [Internet
Options] → [Temporary Internet Files] → [Settings] in
Internet Explorer, and then reduce “Amount of disk
space to use”.
z If no web browser is installed on the PC, Internet
Explorer must be installed before proceeding.
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2
PREPARING FOR NETWORK CONTROL
4 Entering the operation screen
(1) The following screen will be displayed when password
verification has been completed successfully.
(2) Select the language and click [OK]. The operation
screen will be displayed and computer control will now
be possible.
z Connection will not be possible when a menu screen is
being displayed on the DVR unit or when playback-
related operations are being carried out. In such a case,
cancel the menu screen selection or stop the playback
operation before attempting to remake connection.
z Connection may not be possible via a proxy server. In
such a case, cancel the proxy settings.
6
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2
PREPARING FOR NETWORK CONTROL
Controlling from the unit
2 When control rights are switched to the
unit
Whenever the
button on the PC’s operation screen is
Whenever the
button on the PC’s operation screen is
clicked, access will be cancelled and control rights will
switch back to the unit.
clicked, access will be cancelled and control rights will
switch back to the unit. In addition, the “NETWORK
CONTROL” message from the unit’s on-screen display will
be changed to “DISCONNECTED”.
z Once the message has changed to “DISCONNECTED”,
it can be cleared by pressing any of the unit’s buttons.
z To forcibly cancel PC access from the unit, press and
hold the [EXIT] button for at least 2 seconds.
z Access from the PC will not be permitted for a period of
10 seconds after access has been canceled.
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
z The access connection will also be cancelled whenever
communication with the PC is not possible for a period
of about 1 minute or more, and control rights will switch
back to the unit in such a case.
DISCONNECTED
z If the browser is closed without clicking the
approximately one minute is required before
reconnection is possible.
button,
Messages displayed when connected
02
Messages related to the switching of control or the network
connection condition may be displayed on-screen at any
time.
3 Forced disconnection from the unit
To forcibly cancel access by a PC, press and hold the
unit’s [EXIT] button for at least 2 seconds. When access is
forcibly cancelled in this way, the “NETWORK CONTROL”
message will be replaced with “DISCONNECTED”.
z Access from the PC will not be permitted for a period of
10 seconds after access has been canceled.
Display on the unit
1 When control rights are switched to the
PC
“NETWORK CONTROL” appears on the monitor.
Display on the PC
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
1 When disconnected from the network
NETWORK CONTROL
2 When access cannot be made to a
connected DVR
02
z The “NETWORK CONTROL” message is not displayed
when “NETWORK STATUS” has been set to “OFF”
using the unit’s menu. (Regardless of network
3 When accessing a DVR that is already
connected to another 4 PCs
operations, the unit will continue to display images.)
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3
OPERATION PANEL FUNCTIONS AND RESTRICTIONS
9. Playback stop (ID2/3)
Operation panel
This button stops playback and calls up the live display.
10. Playback (ID2/3)
This button starts playback of recorded images.
1
2
11. Previous image (ID2/3)
This button moves a still image back by one frame.
12. Still (ID2/3)
This button pauses the image during playback.
3
9
13. Next image (ID2/3)
This button moves a still image forward by one frame.
4
6
5
7
Setting buttons
8
10
14. Search (ID2/3)
This button calls up the search screen (i.e., the setting
screen).
11
13
12
14
16
15. Copy (ID2/3)
15
20
This button calls up the copy screen (i.e., the setting
screen).
19
17
21
16. Download (ID2/3)
This button calls up the download screen (i.e., the setting
screen).
18
17. Menu setting (ID3)
This button calls up the menu screen (i.e., the setting
screen).
Channel and screen selection buttons
1. Channel number
Displays the channel number selected using “2. Channel
selection” below.
18. Disconnect (ID1/2/3)
This button disconnects the PC from the network and
switches control rights to the unit.
2. Channel selection (ID1/2/3)
Used to select a camera channel when displaying video on
a single screen.
Recording buttons
19. Record (ID3)
This button starts normal recording.
3. [MULTI VIEW] (ID1/2/3)
Used to display video in six split screens.
20. Record stop (ID3)
This button stops normal recording.
Playback buttons
21. Timer (ID3)
4. Previous event (ID2/3)
This button activates timer standby mode when clicked
while recording is stopped. If clicked in Timer Standby
mode, it deactivates this mode.
This button starts playback from the previous alarm event.
5. Next event (ID2/3)
This button starts playback from the next alarm event.
* Entries in parentheses refer to user level restrictions for
6. Speed down (ID2/3)
the specific button. (JP. 23)
This button reduces the playback speed by one setting.
7. Speed up (ID2/3)
This button increases the playback speed by one setting.
8. Reverse playback (ID2/3)
This button starts playback of recorded images in the
reverse direction.
8
English
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTINGS
Before using the unit, settings should be made for
recording conditions, installation environment, and other
similar factors. The corresponding menu items are
displayed in a two-level structure comprising main menus
and sub-menus.
For more details regarding setting methods, see “2.
MENU-SPECIFIC SETTINGS” (JP. 11).
Making menu selection
1 Click the
panel.
button on the operation
The MAIN MENU screen is displayed.
2 On the MAIN MENU screen, select and
click the menu to be used.
The corresponding sub-menu screen appears.
3 Make the required settings.
4 When settings have been completed,
click the
(Playback stop) button on
the operation panel.
The normal screen (monitoring image) is displayed.
z Menu screens will not be displayed during playback. In
such a case, stop playback, return to live mode, and
then click the
button.
z You must be connected with user level ID3 to modify
settings.
z It will not be possible to modify settings when the unit is
recording.
z To move from one sub-menu to another, click the
button to return first of all to the MAIN MENU.
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1
SETTINGS
Menu structure
Reference
page
Main menu
Sub menu
1. CLOCK SET
z CLOCK SET
11
11
2. SUMMER TIME SET/
EXT. CLOCK SET
z SUMMER TIME SET z EXT. CLOCK SET
3. HOLIDAY SET
z HOLIDAY SET
12
13
4. RECORDING AREA SET
z
TOTAL CAPACITY
z
Area-specific capacity
z
AREA FULL RESET
z NORMAL RECORDING AREA OVERWRITE
z ALARM RECORDING AREA OVERWRITE
z REMAINING DISK WARNING
5. RECORDING
CONDITIONS SET
14
z AUTO DELETE
Recording
conditions
6. NORMAL REC MODE
SET
z PICTURE QUALITY z AUDIO RECORDING z REC RATE
z PROGRAM GROUP
15
7. PROGRAM REC SET
8. TIMER SET
z PROGRAM REC SET
16
17
z TIMER SET
z ALARM RECORDING
z PICTURE QUALITY
z AUDIO RECORDING
9. ALARM REC MODE SET
18
z ALARM INTERLEAVE (REC RATE, DURATION)
z PRE-ALARM RECORDING (REC RATE, DURATION)
z ALARM TRIGGER
z DATE z TIME z QUALITY z AUDIO z ALARM COUNT
z ALARM TYPE z TITLE
10. DISPLAY SET
20
z ALARM z DISK FULL z DISK ERROR z LOCK WARNING z KEY IN
z NON REC
11. BUZZER SET
12. HDD SET
21
22
22
z Hard disk capacity
z MIRRORING z PLAYBACK DRIVE
z IP ADDRESS z SUBNET MASK z GATEWAY z PORT
z PASSWORD SETTING z NETWORK SPEED
13. NETWORK SET
Installation
environment
z DATA SPEED z STATUS INFO
z ALARM INFO z ADDRESS
14. RS-485 SET
15. MASK SET
23
24
z MASK (MAIN, MON.2, NETWORK)
z TIME PERIOD z Channel
16. POWER FAILURE/
USED TIME
z POWER FAILURE z USED TIME z FIRMWARE
24
24
17. INITIALIZED RECORD
z DATE z TIME z AREA
*
indicates the display of information only.
z Pull-down menus
Click
When a pull-down menu is clicked, the list of available
selections will be displayed.
Select the required value.
10
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2 MENU-SPECIFIC SETTINGS
1. CLOCK SET
2. SUMMER TIME SET/EXT. CLOCK
SET
Set the unit’s time and date as described below. Be sure
that the date and time are set correctly at this time.
1 Select the “Day/Month/Year/Hour/
Minutes” field from the pull-down menu
on the screen.
1
2
3
The day of the week will be set automatically based on the
date.
4
5
1
2
SUMMER TIME SET setting
1 Change the setting for summer time
from the pull-down menu on the screen.
[Settings] (‹ indicates default setting.)
Setting
‹USE
Description
Time is automatically adjusted to summer time.
2 Click [SET].
Time is not automatically adjusted to summer
time.
NO USE
The current time is set.
2 Set the date/time at which to switch
from standard time to summer time
from the pull-down menu on the screen.
z Recording mode may not be activated if a time has not
been set. In such a case, the following warning will be
displayed when you click the
button.
button or the
3 Set the date/time at which to switch
from summer time to standard time
from the pull-down menu on the screen.
“PLEASE SET THE CLOCK”
EXT. CLOCK SET setting
Synchronized operation will not be possible when time
differences exist between the unlt and the connected
peripheral devices. By setting the external time as
described here, all devices connected to the clock adjust
terminal can be set to the same time.
4 Select “ADJUST TIME” from the pull-
down menu on the screen.
Each day at the specified time, a signal will be output to
adjust the time of connected devices.
(Default setting: 01:00)
5 Click [SAVE].
The summer time or adjustment time is set.
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
3. HOLIDAY SET
Set specific days as holidays using the procedure
described below.
When a day is specified as a holiday, timer recording for
that day will be carried out as if it were a Sunday.
Dates such as national holidays and company off days
should be set as holidays when you want those dates to
have the same security as Sundays.
1
2
1 Specify the day to be treated as a
holiday from the pull-down menu on the
screen.
Left side: Day
Right side: Month
A maximum of 20 different days can be specified as
holidays.
2 Click [SAVE].
The saved or modified settings are stored.
12
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
4. RECORDING AREA SET
The unit’s hard disk is separated into three independent recording areas. Furthermore, five different recording modes can be
used for these three areas.
The memory capacity for each area is allocated as a percentage. (Setting units: 1%)
Recording area
Recording mode
Normal
recording
Recording method
Recording is performed in response to manual operation of the operation panel’s
button.
Manual
Normal
recording area
Recording is performed automatically over the time range set using “8. TIMER SET” from
the MAIN MENU.
Timer recording Automatic
Alarm recording Automatic
Pre-alarm
Recording is performed automatically upon occurrence of an alarm set using “9. ALARM
REC MODE SET” from the MAIN MENU.
Alarm recording
area
Automatic recording of images before an alarm is performed automatically in
Automatic accordance with “PRE-ALARM RECORDING” from the MAIN MENU’s “9. ALARM REC
MODE SET”. This is used as a complementary function for alarm recording.
recording
The required images are copied from another recording area and stored in response to
Manual
Archive area
Copy
manual operation of the operation panel’s
button.
1 Total capacity display
(1)
(2)
This section displays the total capacity of the hard disk.
z If two hard disks are installed and mirroring is set to
“ON” using the digital video recorder’s hard disk
settings, the smaller disk capacity will be shown.
2 Area-specific capacity display
(3)
This section displays the capacity set by the unit for each
recording area as a percentage of the total capacity.
z Setting and modification of recording area capacities
cannot be carried out from a PC.
3 Recording area reset
When the overwrite setting is “OFF”, recording will be
automatically stopped when the corresponding recording
area has been filled with image data. In such a case,
[AREA FULL RESET] can be clicked to overwrite from the
beginning of each area.
The ability to perform a reset will not be required in the
following cases, and for this reason, [AREA FULL RESET]
is not displayed.
z When the capacity setting for both the normal recording
area and the alarm recording area is 0%.
z When the overwrite setting is “ON”.
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
Setting the remaining-space warning level
5. RECORDING CONDITIONS SET
In situations where the overwrite setting for the normal
recording area and the alarm recording area is “OFF”, you
can have the unit issue a warning as soon as the
remaining space in either of these areas reaches a specific
level. (JP. 21)
Set the permission for overwriting to recording areas or the
remaining-space warning level as described below.
The following section describes how to set the level at
which the warning will be issued.
(This level is common for the normal recording area and
the alarm recording area.)
1
2
3
4
5
3 Set the remaining-space warning level
from the pull-down menu on the screen.
Setting range: 1% to 10% (in units of 1%)
Setting overwriting permission for the normal
recording area
Setting the auto delete
You can set the storage period for images. When the set
period has expired, the corresponding data will be
automatically deleted.
When the normal recording area has been filled with data,
this setting dictates whether recording will be stopped or
continued by overwriting the recorded images currently
stored on the hard disk.
4 Set “AUTO DELETE” from the pull-down
menu on the screen.
1 Select “OVERWRITE” for normal
recording area from the pull-down menu
on the screen.
[Settings] (‹ indicates default setting.)
Setting
Description
Auto delete is not to be set
‹OFF
[Settings] (‹ indicates default setting.)
1 -99 You can set the storage period for recorded data
DAYS within a range of “1 DAY” - “99 DAYS” (full days).
Setting
Description
When the normal recording area has been filled with
data, overwriting from the beginning of this area will
start automatically.
‹ON
Recording is stopped when the normal recording area
has been filled with data.
OFF
z If the overwrite setting for the normal recording area
and the alarm recording area is “ON”, the remaining-
space warning level will be displayed as “**” and setting
will not be possible.
Setting overwriting permission for the alarm
recording area
5 Click [SAVE].
The new setting is saved.
When the alarm recording area has been filled with data,
this setting dictates whether recording will be stopped or
continued by overwriting the recorded images currently
stored on the hard disk.
2 Select “OVERWRITE” for alarm
recording area from the pull-down menu
on the screen.
[Settings] (‹ indicates default setting.)
Setting
Description
When the alarm recording area has been filled with
data, overwriting from the beginning of this area will
start automatically.
‹ON
Recording is stopped when the alarm recording area
has been filled with data.
OFF
14
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
6. NORMAL REC MODE SET
Setting the recording rate
Set the recording rate for normal recording as follows.
(Default setting: A15 FPS)
Set conditions for normal recording and timer recording as
described below.
3 Select “REC RATE” for normal
recording from the pull-down menu on
the screen.
1
2
A60, A30, A20, A15, A10, A7.5, A6, A5,
Audio recording
A4.286, A3.75, A3.333, A3, A2.727, A2.308,
is carried out
3
4
A2, A1.667, A1.429, A1.25, A1.111, A1
Audio recording
0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033
is not carried out
5
The letter “A” will be displayed in front of recording rates
that can be set for audio recording.
Setting the picture quality for recording
Selecting setting values
Set the picture quality for recording to the normal recording
area as follows.
Image resolution is determined by the product of picture
quality and recording rate. The higher the picture quality
and the faster the recording rate, the better the image
resolution; however, as higher resolution requires more
storage capacity, the recording time will be reduced
accordingly.
1 Select “PICTURE QUALITY” from the
pull-down menu on the screen.
[Settings] (‹ indicates default setting.)
Setting
Description
SUPER FINE Super Fine
z The recording rate will be limited between A30 and
0.033 FPS when the setting for pre-alarm recording is
“ON”.
z The recording rate for timer recording should be set
separately using the TIMER SET menu. (JP. 17)
FINE
Fine
‹ENHANCED
NORMAL
BASIC
Enhanced
Normal
Basic
4 Select “REC PROGRAM GROUP” from
the pull-down menu on the screen.
Setting audio recording
Audio can be recorded together with images when
performing normal recording.
Select OFF, P-1, P-2, P-3, or P-4.
Note, however, that since this audio data will also be
stored in the normal recording area, the recording time for
this area will be reduced.
z Settings for program groups should be made separately
as described in “7. PROGRAM REC SET”. (JP. 16)
2 Select “AUDIO RECORDING” from the
pull-down menu on the screen.
5 Click [SAVE].
[Settings] (‹ indicates default setting.)
The new setting is saved.
Setting
ON
‹OFF
Description
Audio will be recorded.
Audio will not be recorded.
z Audio recording can only be specified when the
recording rate is A60 to A1 FPS.
English
15
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
7. PROGRAM REC SET
4 Use the above procedure to set up to
four program patterns.
When monitoring a number of cameras connected to this
digital video recorder, a separate recording rate can be set
for each camera. In addition, video recorded from each
camera and the corresponding recording rates can be set
in programs with up to four patterns, thus facilitating the
simple specification of programs for timer-setting and
normal recording setting menus.
z Set values are lost if switched to a different window
without clicking [SAVE].
1
2
3
Set the picture quality for recording to the normal recording
area as follows.
1 Select “PROGRAM” from the pull-down
menu on the screen.
Select from P-1 through P-4.
2 Select “SELECT INDIVIDUAL CAMERA
RATE (FPS)” from the pull-down menu
on the screen.
Of the displayed cameras, select those from which video is
to be recorded, and then set a recording rate for each.
[Settings] (‹ indicates default setting)
Setting
OFF
‹REC RATE
Description
Video will not be recorded from the selected
camera.
Sets the rate for recording.
z Usable recording rates
30, 15, 7.5, 3.75, 1.875, 1, 0.5, 0.33, 0.25, 0.2, 0.1,
0.05, 0.03
(Unit: FPS)
z The recording rates listed in pull-down menus vary
according to the connected channels.
3 Click [SAVE].
When setting has been completed, the associated normal
recording time quantity is displayed for reference
purposes.
16
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
8. TIMER SET
Set timer operation duration and timer recording conditions on a day-specific basis as shown below.
(1) (2) (3) (4) (5) (6)
(7)
(8)
For setting timer
recording spanning
more than 24 hours
2
1 Setting timer recording conditions for
different days of the week.
2 Click [SAVE].
Timer setting (or modification) is completed.
(1) WEEK
These fields specify the days of the week for timer
recording. By using multiple setting rows, it is possible to
setup timer recording a number of different times on a
single day.
„ Performing timer recording
Click the
button on the operation panel. (JP. 8)
(2) START
„ Overlapping of timer reservation times
z If timer settings overlap, recording is performed in
accordance the following priority sequence.
Individual reservations → “DLY” → “EXT”
(High) ←−−−−−−−−−− Priority −−−−−−−−−→ (Low)
z If a reservation for a particular day overlaps with a daily
reservation, priority is given to that with the earliest start
time. If both have the same start time, priority is given to
that with the highest setting position in the menu.
These fields are used to enter the time at which to start
timer recording.
(3) STOP
These fields are used to enter the time at which to stop
timer recording.
(4) PROGRAM
To carry out program recording, select a program (P-1
through P-4). (JP. 16)
(5) REC RATE
These fields set the recording rate. (JP. 15)
To carry out program recording, set to “***”.
„ Setting a timer for over 24-hours continuous
recording
(6) SET
The bottom two lines of the TIMER SET screen are
used to make settings for this type of recording.
(1) Click [OVER 24H] to switch the setting format.
(2) Set the day and time for the start of recording in the
upper row.
Set these fields to “ON” to set timer recording.
Set these fields to “OFF” when timer recording is not to be set.
(7) SAT, DLY
When the start and stop times, program, and the recording
rate have been entered and “ON” has been selected for
“SET”, you will be able to carry out timer recording over the
same period every day.
(3) Set the day, time, program and recording rate for
the end of recording in the lower row.
(4) Select “ON” for “SET” on the bottom row to specify
timer recording extending for over 24 hours.
(8) EXT
Displays details set by an external timer. (These are not
start and end time settings.)
z If “DLY” is set for any other day, all rows will adopt this
setting.
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
9. ALARM REC MODE SET
Setting the picture quality for recording
Set the picture quality for alarm recording as follows.
Set the recording conditions for alarm recording as follows.
Setting alarm recording
In order to carry out alarm recording, it will be necessary to
set operation patterns and recording conditions.
2
3
4
6
5
1
2 Select “PICTURE QUALITY” from the
pull-down menu on the screen.
[Settings] (‹ indicates default setting.)
Setting
Description
SUPER FINE Super Fine
1 Select a mode using “ALARM
RECORDING” from the pull-down menu
on the screen.
FINE
Fine
‹ENHANCED Enhanced
NORMAL
BASIC
Normal
Basic
[Settings] (‹ indicates default setting.)
Setting
‹OFF
Description
Does not perform alarm recording.
Alarm recording is always performed,
regardless of timer recording or timer settings.
ENABLED
Setting audio recording
Audio can be recorded together with images when
performing alarm recording. Note, however, that since this
audio data will also be stored in the alarm recording area,
the recording time for this area will be reduced.
AL-REC ON Alarm recording is performed only during timer
TIMER recording.
AL-REC OFF Alarm recording is performed only during
TIMER
recording other than timer recording.
Alarm recording is performed only in the
period set for timer recording without timer
recording actually being performed.
OLY AL-RC
ON TMR
3 Select “AUDIO RECORDING” from the
pull-down menu on the screen.
[Settings] (‹ indicates default setting.)
Setting
ON
‹OFF
Description
Audio will be recorded.
Audio will not be recorded.
z Audio recording can only be specified when the
recording rate is between A30 and A1 FPS.
[Settings] (‹ indicates default setting.)
Setting the alarm interleave
Setting
Description
4 Select “ALARM INTERLEAVE” from the
pull-down menu on the screen.
Recording is switched between camera video
including an alarm and video from all connected
cameras.
SW
18
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
Video is recorded only from cameras with an
alarm occurring.
Setting pre-alarm recording
‹ONLY
Set the recording conditions to be used for pre-alarm
recording as described below. (JP. 25)
5 Select “REC RATE” from the pull-down
menu on the screen.
(Default setting: A15 FPS)
A30, A20, A15, A10, A7.5, A6, A5, A4.286,
Audio recording
A3.75, A3.333, A3, A2.727, A2.308, A2,
is performed
A1.667, A1.429, A1.25, A1.111, A1
Audio recording
0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033
is not performed
7
8
9
The letter “A” will be displayed in front of recording rates
that can be set for audio recording.
6 Set the duration for alarm recording
using “DURATION” from the pull-down
menu on the screen.
7 Select “ON” or “OFF” using “PRE-
ALARM RECORDING” from the pull-
down menu on the screen.
5 SEC, 10 SEC, 20 SEC, 40 SEC, 1 MIN, 2 MIN, 3 MIN,
*1
4 MIN, 5 MIN, 10 MIN, 15 MIN, CC
[Settings]
(Default setting: 20 SEC)
* Operates while an alarm is being activated.
1
Setting
ON
OFF
Description
Performs pre-alarm recording.
Does not perform pre-alarm recording.
z When “OFF” has been selected for “ALARM
RECORDING”, this item will be displayed as “**” and
selection will not be possible.
8 Make a selection for “REC RATE” from
the pull-down menu on the screen.
(Default setting: A15 FPS)
A30, A20, A15, A10, A7.5, A6, A5, A4.286,
Audio recording
A3.75, A3.333, A3, A2.727, A2.308, A2,
is performed
A1.667, A1.429, A1.25, A1.111, A1
The letter “A” will be displayed in front of recording rates
that can be set for audio recording.
9 Set the duration for pre-alarm recording
using “DURATION” from the pull-down
menu on the screen.
3 SEC, 5 SEC, 10 SEC, 20 SEC, 40 SEC, 1 MIN, 2 MIN,
3 MIN, 4 MIN, 5 MIN, 10 MIN, 15 MIN
(Default setting: 1 MIN)
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
Setting alarm triggers
10. DISPLAY SET
Set the alarm triggers (i.e., launch signals) that constitute
operation conditions for alarm recording as follows.
Set conditions for the display of data on the unit’s monitor
by selecting “ON” or “OFF” for each item.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
10
11
2
10Select a launch signal for alarm
recording using “ALARM TRIGGER”
from the pull-down menu on the screen.
z These settings apply to information displayed on the
monitor connected to the unit, not to the PC monitor’s
display information.
[Settings] (‹ indicates default setting.)
Setting
Description
Starts recording when an external alarm is
activated.
1 Select “ON” or “OFF” for each data
display item.
‹ALARM
Starts recording when a motion sensor is
activated.
SENSOR
Default
setting
Item
Description
Starts recording when both an external alarm
and a motion sensor are activated
simultaneously.
ALARM AND
SENSOR
Sets whether the current date or
recording date will be displayed.
(1) DATE
ON
Starts recording when an external alarm or a
motion sensor is activated independent of the
other.
Sets whether the current time or
recording time will be displayed.
ALARM OR
SENSOR
(2) TIME
ON
ON
ON
ON
Sets the picture quality for recording
or playback.
(3) QUALITY
(4) AUDIO
Sets the display condition for audio
recording.
z External alarm detection
ALARM
(5)
Displays the number of recorded
alarms.
The term “external alarm detection” is used to describe
input of an external detection signal from a door switch
or the like to the unit's alarm input terminal.
z Motion sensor detection
COUNT
Sets the alarm recording type.
z For alarm recording:
“ALARM” is displayed
z For pre-alarm recording.
“PRE” is displayed
ALARM
(6)
ON
ON
TYPE
The term “motion sensor detection” is used to refer to
detection of motion on the monitor in accordance with
motion sensor settings.
Sets the display condition for camera
title.
(7) TITLE
z The setting of motion sensors is carried out using the
digital video recorder.
2 Click [SAVE].
11Click [SAVE].
The on-screen data display conditions are set or modified.
The new settings is saved.
20
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
11. BUZZER SET
Set a warning buzzer to sound for alarms or when the hard
disk space reaches zero as described below.
To sound a buzzer on the PC
z Create a folder named “BUZZER” within the root
directory of the PC's C drive.
z Within this folder, save the sound to be used as a
buzzer in .wav format and with the name
“BUZZER.WAV”.
1 Select “ON” or “OFF” for the alarm
buzzer.
(1)
(2)
Example: C:\BUZZER\BUZZER.WAV
Once these settings have been made, whenever a key is
pressed on the digital video recorder or an error occurs,
the PC will provide notification by playing the saved .wav
file.
* Only the first second of the saved audio file will be
played, and for this reason, it is advisable to choose a file
with suitable audio in the first second. Furthermore, the
use of large audio files is discouraged.
(3)
(4)
(5)
(6)
2
* The buzzer will only sound in response to alarm input.
Default
setting
Item
Description
To cancel sounding of a buzzer on the PC
z Delete the folder or file created in the above-mentioned
process, change the name of the audio file, or move it
to a different location on the hard disk.
Sounds a buzzer when an alarm is
detected.
(1) ALARM
OFF
Sounds a buzzer when the amount of
data stored in each of the hard disk’s
recording areas has reached the
remaining-space warning level.
(JP. 14)
DISK
(2)
ON
ON
z Press the
(Playback stop) button to stop the
FULL
buzzer of PC.
DISK
(3)
Sounds a buzzer when a hard-disk
error occurs.
ERROR
Sounds a buzzer when an operation
button not permitted for the current
user level is pressed while the secu-
rity lock is set. Specifically, the
buzzer sounds twice with an interval
of approximately 0.5 seconds.
z Different settings cannot be used for the recorder and
the PC.
z When the PC buzzer is sounded, it can be stopped by
LOCK
(4) WARN-
ING
ON
pressing any button on the digital video recorder.
The buzzer emits a key-operation
sound each time a button is pressed.
(5) KEY IN
OFF
OFF
Sounds a buzzer when recording is
stopped.
(6) NON REC
2 Click [SAVE].
The new settings are saved.
z These settings apply to the digital video recorder’s
buzzer. To sound a buzzer on the PC, refer to NOTE.
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
12. HDD SET
z The “***” will be displayed for “PLAYBACK DRIVE”
when only one hard disk is being used or when
“MIRRORING” is set to “OFF”. Settings can not be
made in these cases.
This screen provides information regarding the hard disk.
z When this setting is made after hard disk expansion,
the hard disks will be initialized and all recorded video
will be lost. If any important recordings are stored on the
hard disks, they should be stored on a separate data
storage device before making this setting.
(1)
(2)
(3)
13. NETWORK SET
Network settings must be made in advance on the unit
whenever it is to be controlled via a network. Once this has
been done, settings can then be changed from the
controlling PC.
(1) Hard disk capacity
This item displays the total capacity of the hard disk.
If hard disk expansion is carried out, a value will be
displayed for each disk.
(2) MIRRORING
This item displays settings relevant to mirroring-type
z Changing network-related settings
recording on the digital video recorder.
When these settings are modified, connection will be
canceled and control rights will be returned to the unit.
To restore the connection, repeat network settings on
the PC to match the modified unit settings.
[Settings] (‹ indicates default setting.)
Setting
ON
Description
Mirroring recording is carried out.
Mirroring recording is not carried out.
‹OFF
(1)
(2)
(3)
z Mirroring
When hard disk expansion has been carried out, the
same video can be recorded to both hard disks in a
process known as “mirroring”. Even if a problem occurs
in the writing of video data to one of the disks, it will be
possible to extract normal data from the other disk
when this function is turned on.
(4)
(5)
(6)
2
(3) PLAYBACK DRIVE
This item indicates which of the hard drives will be
used to provide video for playback when mirroring has
been turned on.
1 Change the settings as required.
Item
Description
Allows the unit’s IP address to be
modified.
(1) IP ADDRESS
[Settings] (‹ indicates default setting.)
Setting
‹***
Description
Mirroring is not carried out.
Allows the unit’s subnet mask to be
modified.
(2) SUBNET MASK
(3) GATEWAY
Allows the unit’s gateway to be modified.
DISK1
DISK2
Playback data is read from disk1.
Playback data is read from disk2.
Allows the unit’s port number to be
modified. Set within the range of 1 to
65535. (default setting: 80)
(4) PORT
22
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
14. RS-485 SET
z If a value other than “80” is set as the default value for
the port, when specifying the URL, enter a colon (:) and
then the port number after the IP address.
For example, if the port number was set as “81”, you
should enter
This screen displays settings relevant to the unit’s
interfaces.
z It will not be possible to modify settings: The screen
displays data for confirmation purposes only.
z If settings are changed during network control, the
connection will be terminated.
(5) PASSWORD SETTING
This item allows you to set a password for each different
user level.
User level
User name
1
2
3
ID1
ID2
ID3
Monitoring of live images
Monitoring and searching
of recorded images
Usable
menus
Starting and stopping of
recording; timer recording;
modification of unit
settings, etc.
Item
Overview
Setting Description
Password (default setting)
1111
2222
3333
2400/
4800/
9600/
19200
(bps)
DATA
SPEED
Displays the RS-485
communication speed.
(1)
(2)
z Use between 4 and 8 alphanumeric characters for
Status
information
will be
transmitted.
passwords.
ON
Displays whether or
not status information
will be transmitted
during RS-485
STATUS
INFO
(6) NETWORK SPEED
Status
This item lets you modify the network speed setting.
(Network speed cannot be set using the digital video
recorder.)
information
OFF
communication.
will not be
transmitted.
NO LIMIT, 64, 128, 256, 512, or 1024 (kbps)
When the unit is reset, the network speed setting will revert
to the default value (i.e., NO LIMIT).
Alarm
information
will be
transmitted.
ON
Displays whether or
not alarm information
will be transmitted
during RS-485
ALARM
INFO
(3)
Alarm
information
OFF
2 Click [SAVE].
The network settings or modifications are saved.
communication.
will not be
transmitted.
Displays the address
(4) ADDRESS when RS-485 has
been selected.
Set within
0 to
the range of
127
0 to 127.
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MENU-SPECIFIC SETTINGS
15. MASK SET
16. POWER FAILURE/USED TIME
Use the following procedure to set video from individual
cameras to be masked by a gray pattern when it is not
needed on a monitor screen.
Check the date and time of power failures and the amount
of hard disk usage as described below.
(1)
(1)
(2)
(3)
2
(2)
(3)
1 Set the following functions as required.
Setting
(1) MASK
Description
Turns masking on or off.
Item
Description
Displays the number of power failures and the
date and time of occurrence and restoration
for the four most recent power failures.
TIME
PERIOD
Selects one of the time periods, T-1 through
T-4.
POWER
FAILURE
(2)
(1)
Turns each channel's masking on or off
individually for the main monitor, the monitor
2, and network video.
Displays the usage time for the digital video
recorder.
(3) CH
(2) USED TIME DISK1 USE: Total usage time for Disk 1
DISK2 USE: Total usage time for Disk 2
POWER: Total usage time for the unit
2 Click [SAVE].
(3) FIRMWARE Displays the firmware version.
The setting is saved.
17. INITIALIZED RECORD
z Network mask settings are valid only for the user
connecting to the network with ID1. Users connecting
using ID2 and ID3 will be able to display all channels.
Check the records for hard-disk initialization and area
resetting.
(1)
(2)
(3)
Item
(1) DATE
Description
Displays the date of the operation.
Displays the time of the operation.
(2) TIME
(3) AREA
Displays the area in question and the
corresponding operation content.
24
English
Download from Www.Somanuals.com. All Manuals Search And Download.
1 RECORDING IMAGES
This section will describe the way in which monitored
images and alarm images can be stored on the unit’s
internal hard disk.
Before any of these operations can be carried out, it will be
necessary to make menu settings to match the installation
environment. (JP. 10)
Canceling timer recording
3 With “TIMER STANDBY” displayed,
click the
panel.
button on the operation
Alarm recording
When an alarm is detected by the alarm input terminal or a
motion sensor, the recording of alarm images to the alarm
recording area will start automatically.
Whenever alarm recording starts, normal recording, timer
recording, and pre-alarm recording will be automatically
terminated, and they will be automatically restarted as
alarm recording ends.
Normal recording
Monitored images can be recorded to the normal recording
area by a manual operation.
1 Set the conditions for “ALARM
RECORDING” using the “ALARM REC
MODE SET” menu screen. (JP. 18)
1 Click the
panel.
button on the operation
Normal recording starts.
(1) Regardless of the unit’s current operation or condition,
alarm recording will be started automatically whenever
an alarm is detected.
Stopping normal recording
(2) When the duration set for alarm recording has ended,
alarm recording will be automatically stopped.
2 Click the
panel.
button on the operation
z Settings can be made to have a buzzer sound on the
PC when an alarm occurs on the digital video recorder.
(JP. 21)
Timer recording
Monitored images can be automatically recorded to the
normal recording area in accordance with timer settings.
Note that timer recording will not operate during normal
recording.
When the alarm sound stops during alarm recording, click
the stop button on the operation panel.
Pre-alarm recording
1 Set the conditions for timer recording
using the timer setting menu screen.
(JP. 17)
Pre-alarm recording can be set to record video just before
an alarm. It will be possible to view images from just before
an alarm when alarm recording is being played back.
2 Click the
panel.
button on the operation
1 Set the conditions for “PRE-ALARM
RECORDING” using the “ALARM REC
MODE SET” menu screen. (JP. 19)
The unit will enter standby mode for timer recording, and
recording will then start and stop automatically at the set
times. The current condition for timer recording is
displayed on-screen using the message “TIMER
STANDBY” or “TIMER RECORDING”.
(1) The newest images from the preset duration will be
automatically recorded and updated by overwriting.
(2) Pre-alarm recording will be automatically terminated
whenever alarm recording starts, and it will be
automatically restarted as alarm recording ends.
z If “OLY AL-RC ON TMR” has been selected using the
“ALARM REC MODE SET” menu item (JP. 18), it will
not be necessary to click the
standby mode.
button to setup
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
1
RECORDING IMAGES
(4) AUDIO (Default setting: OFF)
Sound can be played in live mode or play mode.
* Set only for full screen monitoring.
Screen display items
(6)
(8)
(9) (10)
[Settings]
Setting
Description
(7)
OFF
Audio will not be played.
ON-5SEC
Audio will be played.
ON-10SEC
ON-15SEC
ON-20SEC
ON-30SEC
Set the audio delay (5, 10, 15, 20, or 30
seconds).
In Play mode, the speed of fast-forward
and frame advance may be affected by
the network environment being used.
Screenindicatingthe In addition, if the audio-data reading
reading of audio data
screen appears frequently, the audio
delay (5, 10, 15, 20, or 30 seconds)
should be made longer to match the
network environment.
(1)
If this screen continues to appear frequently
even when the delay time is 30 seconds, it
indicates that audio playback is not possible
with the network environment being used.
(5)
(2)
(3)
(4)
(1) READ INTERVAL (Default setting: 1)
This item allows you to select one of five image display
speeds.
Larger setting numbers correspond to higher speeds;
however, the actual speed will depend on the speed of
your network connection.
* When “(4) AUDIO” is set to “ON”, “READ INTERVAL”
cannot be set.
* Audio delay
The delay time prevents sound dropouts
and the loss of synchrony between video
and sound.
(5) SAVE TO PC (Default setting: OFF)
When this is set to “ON”, live images or playback images
can be saved on a PC.
* Size for full screen monitoring.
(2) SIZE (Default setting: 1)
This item allows you to select one of six image sizes.
Larger setting numbers correspond to larger image sizes.
z A user level of ID2 or better is required for the playing
back and saving to PC.
z When audio is to be played back, store the audio on the
PC, install “DVR Viewer” for playback (JP. 2), and then
set audio recording to “ON”.
1
2
3
320 × 240
400 × 300
640 × 480
4
5
6
800 × 600
1,024 × 768
1,280 × 960
* Size for full screen monitoring.
z Playback will be performed with priority given to audio,
and as a result, images may not be displayed for certain
hardware and software configurations.
(3) QUALITY (Default setting: 2)
This item allows you to select one of three picture quality
settings for PC display. (Only live mode)
z Audio playback is not possible for multi-screen display.
1
2
3
Lowest quality
Standard quality
Best quality
(6) Image mode
LIVE: Live mode
PLAY: Play mode
(7) Time
Live mode: Displays the current time
Play mode: Displays the recording time
26
English
Download from Www.Somanuals.com. All Manuals Search And Download.
1
RECORDING IMAGES
(8) NORMAL RECORDING MODE
This item displays the current condition for normal
recording.
z STOP
z RECORDING
z TIMER STANDBY
z TIMER RECORDING
z AREA FULL (in normal recording area)
(9) ALARM RECORDING MODE
This item displays the current condition for alarm
recording.
z STOP
z PRE ALARM RECORDING
z ALARM RECORDING
z AREA FULL (in alarm recording area)
(10)Connection user
In situations where a number of different users are
connected, this item displays the connection condition for
the various user levels.
Typical display: ID1: 3 ID2: 1 ID3: 0
The user ID for the current user is displayed in red.
English
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2 WATCHING IMAGES
Monitored live images and recorded images can be viewed
freely and whenever so required.
Interference may appear on images or the playback may
seem to have paused during the following operations;
however, this is normal and no cause for concern.
z When the images from the normal recording area and
the alarm recording area are played back in succession,
the quality of the picture may drop momentarily as
playback switches from one recording area to another.
z If normal, fast-forward, or fast-rewind playback is
carried out either for playback during alarm recording or
continuous playback from the normal recording area
and alarm recording area, the image may seem to have
paused in certain cases.
Note that switching to live or playback images, modifying
the screen display, and other similar operations have
absolutely no effect on timer recording and alarm
recording.
Watching live images during playback
Click the
(Playback stop) button on the operation
panel. When playback has finished, the screen will switch
back to the display of monitored live images.
Buttons used for
playback
Playing back recorded images
The following two methods are available for the playback
of images.
Image
Replay method
specification
Click the
button on the operation panel to
switch to play mode and commence the
playback of images from the normal recording
area and the alarm recording area in the
sequence in which they were recorded.
z When recorded images are played back for
the first time or when a reset is performed
from the unit, playback will start from the
beginning of the stored data.
When no
images are
specified for
replay
z Any subsequent playback will start at the last
stop point.
z The search function can be used to find the
required images from the data stored in the
hard disk’s various recording areas.
z When the image for playback has been
identified using search mode, the play mode
screen will be automatically called up and the
specified image will be played. For more
details, see “3. SEARCH MODE” (JP. 33).
When images
are specified
for replay
28
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2
WATCHING IMAGES
Specifying the number of screens to
display
Performing operations in play mode
When a number of cameras are connected to the digital
video recorder, it is possible to monitor video from several
of these in multi-screen format. Use the following
procedures to specify the channel numbers for the
cameras to be displayed and the number of screens.
Playback
Click the
button.
[CHANNEL]
Adjusting the playback speed
[MULTI VIEW]
During playback, click the
button.
or
Viewing on a full screen
Click a [CHANNEL].
: Increases the playback speed.
: Reduces the playback speed.
Click the button for the camera to be monitored. The video
from the specified channel will be displayed on the full
screen, and the corresponding number will be displayed in
the “CHANNEL” box.
Reverse playback
Click the
button.
Adjusting the reverse playback speed
Viewing on a multi 6 screen
During reverse playback, click the
button.
or
Press the [MULTI VIEW] button.
: Increases the reverse playback speed.
: Reduces the reverse playback speed.
Video from all recording and recorded cameras will be
displayed on a screen divided into six individual portions.
Still image
„ To resume full screen monitoring
Either click a [CHANNEL] button or double click one of the
multiple screens being displayed to resume single-screen
monitoring.
During playback, click the
Playback will be paused on the current image.
To return to normal play mode, click the
playback is paused.
button.
button while
z Video from each screen of the multi-screen will be
updated at a speed appropriate for its channel. In
addition, network conditions will also affect the updating
speed.
Frame advance (forward/reverse)
While playback is paused, click the
button.
or
: Advances a frame in the forward direction.
: Advances a frame in the reverse direction.
Alarm skip
During playback, click the
button.
or
The previous or next alarm image is displayed accordingly.
: Skips to the next alarm video.
: Skips to the previous alarm video.
Stopping playback
During playback, click the
(Playback stop) button.
English
29
Download from Www.Somanuals.com. All Manuals Search And Download.
2
WATCHING IMAGES
Live mode image (Multi channels)
Play mode image (1 channel)
(11) (8) (9) (12)
(9)
(10)
(6)
(8)
(6)
(7)
(7)
(1)
(3)
(5)
(2)
(1)
(2)
(4)
(4) AUDIO (Default setting: OFF)
Sound can be played in live mode or play mode.
* Set only for full screen monitoring.
[Settings]
Adjusting the image and audio
The images displayed on screen can be adjusted in a
number of ways.
To make an adjustment, select the adjustment value from
the menu and then click [SET] from the pull-down menu on
the screen.
Setting
Description
OFF
Audio will not be played.
ON-5SEC
Audio will be played.
ON-10SEC
ON-15SEC
ON-20SEC
ON-30SEC
Set the audio delay (5, 10, 15, 20, or 30
seconds).
In Play mode, the speed of fast-forward
and frame advance may be affected by
the network environment being used. In
(1) READ INTERVAL (Default setting: 1)
This item allows you to select one of five image display
speeds.
Larger setting numbers correspond to higher speeds;
however, the actual speed will depend on the speed of
your network connection.
Screenindicatingthe addition, if the audio-data reading screen
reading of audio data appears frequently, the audio delay (5, 10,
15, 20, or 30 seconds) should be made
longer to match the network environment.
If this screen continues to appear frequently
even when the delay time is 30 seconds, it
indicates that audio playback is not possible
* When “(4) AUDIO” is set to “ON”, “READ INTERVAL”
cannot be set.
with the network environment being used.
* Audio delay
The delay time prevents sound dropouts
and the loss of synchrony between video
and sound.
(2) SIZE (Default setting: 1)
This item allows you to select one of six image sizes.
Larger setting numbers correspond to larger image sizes.
(5) SAVE TO PC (Default setting: OFF)
When this is set to “ON”, live images or playback images
can be saved on a PC.
1
2
3
320 × 240
400 × 300
640 × 480
4
5
6
800 × 600
1,024 × 768
1,280 × 960
* Set only for full screen monitoring.
* Size for full screen monitoring.
z A user level of ID2 or better is required for the playing
back and saving to PC.
z When audio is to be played back, store the audio on the
PC, install “DVR Viewer” for playback (JP. 2), and then
set audio recording to “ON”.
z Playback will be performed with priority given to audio,
and as a result, images may not be displayed for certain
hardware and software configurations.
(3) QUALITY (Default setting: 2)
This item allows you to select one of three picture quality
settings for PC display. (Only live mode)
1
2
3
Lowest quality
Standard quality
Best quality
z Audio playback is not possible for multi-screen displays.
z In the case of certain PC performance levels and
specifications, a portion of the video may not be
displayed. If this is the case, go to [Tools] → [Internet
Options] → [Temporary Internet Files] → [Settings] in
Internet Explorer, and then reduce “Amount of disk
space to use”.
30
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2
WATCHING IMAGES
Screen display items
Settings for downloading live images
to a PC
(6) Image mode
LIVE: Live mode
PLAY: Play mode
z If video with audio is to be downloaded to a PC, DVR
Viewer must be installed before the necessary settings
can be made. (JP. 2)
(7) Time
Live mode: Displays the current time
Play mode: Displays the recording time
(8) NORMAL RECORDING MODE
This item displays the current condition for normal
recording.
1 Live images will be displayed when
connected with user level ID2 or ID3.
z STOP
z RECORDING
z TIMER STANDBY
z TIMER RECORDING
z AREA FULL (in normal recording area)
(9) ALARM RECORDING MODE
This item displays the current condition for alarm
recording.
z STOP
z PRE ALARM RECORDING
z ALARM RECORDING
z AREA FULL (in alarm recording area)
(10)Connection user
In situations where a number of different users are
connected, this item displays the connection condition for
the various user levels.
2 Set “SAVE TO PC” to “ON” and then
click [SET].
Typical display: ID1: 3 ID2: 1 ID3: 0
The user ID for the current user is displayed in red.
The save setting items are displayed.
(11)PLAYBACK AREA (in the play mode screen only)
This item displays the recording area for the current
playback image
z ALARM
z PRE-ALRAM
z NORMAL
z ARCHIVE
(12)SPEED (in the play mode screen only)
This item displays the playback speed and direction.
Display
PLAY
Playback direction
Forward
Still
Playback speed
Normal
Still
STILL
R.PLAY
CUE
Reverse
Forward
Reverse
Forward
Reverse
Normal
Fast-forward playback
Fast-rewind playback
Slow playback
REVIEW
SLOW
R.SLOW
Slow reverse playback
English
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2
WATCHING IMAGES
„ To cancel a save operation
3 Set “DURATION”.
The duration for images to be saved to the PC should be
Click [CANCEL].
set in units of one minute.
(2) A pop-up window will be displayed when saving has
been completed.
4 Click [BROWSE].
A dialog box for selecting save location will be displayed,
The final still image from the save process will be
displayed.
and a suitable location should be set.
z It is also acceptable to input a location for saving
directly into “DESTINATION FOLDER”.
7 Click [OK] in the pop-up window.
The setting menu will close and the screen returns to the
5 Click [OK].
condition for procedure 2 above.
The setting menu will close and the screen will return to
Folders as shown below will be created within the folder
set in procedure 4, and within these folders, images are
stored with numbers assigned automatically.
the condition for procedure 2 above.
The “DESTINATION FOLDER” location is displayed.
6 Click [START].
(1) The saving process begins.
The elapsed save time and the current save image are
displayed on screen.
DVR00001 IMG00001
(1)
000001.JPG
000002.JPG
000003.JPG
(2)
DVR00002
IMG00001
000001.JPG
000002.JPG
000003.JPG
The elapsed save time will be incremented as the
save progresses.
(1) The folder “DVR00001” is created.
(2) Within this folder, folders are created in sequence
starting with “IMG00001”. Images are stored in each
folder.
Elapsed save time
32
English
Download from Www.Somanuals.com. All Manuals Search And Download.
3 SEARCH MODE
Images stored in the recording areas can be searched and played back in search mode. Furthermore, five different search
methods are available for doing so.
Basic operation
1 In live mode (When playback is
2 Select and click the desired search
mode from the SEARCH screen.
stopped), click the
operation panel.
button on the
The screen for the selected search mode is displayed.
The SEARCH screen is displayed.
3 Search for images using the search
mode screen.
See the following pages for more details regarding the
different search procedures.
4 Check the returned images using the
preview or thumbnail display and then
click the screen.
Play mode will be activated and the playback of the full
image will start. See “Performing operations in play mode”
(JP. 29) for more details regarding still image, fast-
forward, and other similar operations.
Search menu
Recording area
for searching
Search mode
Description
1
2
ALARM SEARCH
Alarm recording area
Lets you search and play back alarm images from the alarm event list.
Lets you search and play back alarm images using thumbnails.
ALARM THUMBNAIL
SEARCH
Alarm recording area
Normal recording area and
alarm recording area
3
4
TIME/DATE SEARCH
Lets you search and play back recorded images by date/time.
ARCHIVE AREA
SEARCH
Lets you search and play back images stored (or copied) to the archive area
using an image list.
Archive area
MOTION
DETECTION
SEARCH
Normal recording area and Lets you search and play back recorded images of moving objects detected in
5
alarm recording area
accordance with motion sensor settings.
z If the normal recording area is “*0%”, it will not be
possible to select “ALARM SEARCH”, “ALARM
THUMBNAIL SEARCH”, or “MOTION DETECTION
SEARCH”.
English
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4 OPERATIONS IN SEARCH MODES
1. ALARM SEARCH
2. ALARM THUMBNAIL SEARCH
In alarm search mode, images recorded in the alarm
recording area are presented as a list of alarm numbers.
Accordingly, alarm images from the recording list can be
searched and played back.
In alarm thumbnail search mode, all of the alarm images
stored in the alarm recording area are displayed as
thumbnails. Accordingly, you can search and play back
alarm images using their thumbnails.
(1)
(2)
(3)
(4)
(5)
(6)
(1) NO: Alarm number
(2) DATE/TIME: Recording date and time
(3) CH: Displays the channel on which alarm recording
was performed
(4) PREVIEW: Displays a preview of alarm images
(5) [BACK]: Displays a list of the previous 8 images
(6) [NEXT]: Displays a list of the subsequent 8 images
1 Select “2. ALARM THUMBNAIL
SEARCH” from the SEARCH menu.
z The newest alarm images with attached alarm numbers
are displayed in chronological order in the ALARM
THUMBNAIL SEARCH screen.
z A maximum of 9 alarm events can be displayed as
thumbnails on a single screen.
z Click [BACK] or [NEXT] to display the thumbnail screen
for the previous or subsequent 9 events accordingly.
1 Select “1. ALARM SEARCH” from the
SEARCH menu.
An alarm event list is displayed in the ALARM SEARCH
screen with newer recordings displayed first.
2 Click the thumbnail for the image to be
played back.
2 Select the alarm number to be played
back from the alarm event list.
Full-screen playback will start from the point at which the
alarm was triggered.
z Clicking an alarm No. button displays a preview of the
corresponding alarm image.
z A maximum of 8 alarm events can be displayed on a
single screen.
z Click [BACK] or [NEXT] to display the alarm event list
for the previous or subsequent 8 events accordingly.
3 Click the preview screen for the image
to be played back.
Full-screen playback will start from the point at which the
alarm was triggered.
34
English
Download from Www.Somanuals.com. All Manuals Search And Download.
4
OPERATIONS IN SEARCH MODES
3. TIME/DATE SEARCH
5 Click the preview screen for the image
to be played back.
In date/time search mode, images from the normal
recording area or the alarm recording area can be played
back by specifying the corresponding date and time.
Full-screen playback will start.
4. ARCHIVE AREA SEARCH
(1)
(5)
In archive area search mode, you can play back recorded
images stored (or copied) to the archive area.
(1)
(2)
(3)
(4)
(5) (6)
(2)
(3)
(4)
(6)
(1) RECORDING TOP: Displays the date and time of the
oldest recording
(2) RECORDING END: Displays the date and time of the
newest recording
(1) NO: Image number
(2) DATE/TIME: Recording date and time
(3) CH: Displays the channel on which recording was
performed.
(4) CAPACITY TOTAL: Total capacity of the archive area
(5) CAPACITY USED: Amount of archive area capacity
currently storing data
(3) CHANNEL: Displays the channel (or camera number)
(4) SEARCH: Used to set the recording date and time of
the image to be played back
(5) [PREVIEW]: Used to indicate preview display
(6) PREVIEW: Displays a preview of the image
corresponding to the specified date and time
(6) PREVIEW: Displays a preview of the recorded image
1 Select “3. TIME/DATE SEARCH” from
the SEARCH menu.
1 Select “4. ARCHIVE AREA SEARCH”
from the SEARCH menu.
The TIME/DATE SEARCH screen is displayed.
The search screen for the archive area is displayed.
This screen contains a list of stored images displayed in
sequence from the earliest item.
2 Specify the channel or camera number
from “CHANNEL” pull-down menu.
If only one channel is available, “--” will be displayed.
2 Select the image number to be played
back from the stored image list.
3 Specify the recording date and time for
the image to be played back from
“SEARCH” pull-down menu.
z A preview of the corresponding stored image is
displayed.
Day/Month/Year/Hours/Minutes
z A maximum of 8 stored images can be displayed on a
single screen.
4 Click [PREVIEW].
z Click [BACK] or [NEXT] to display the image list for the
previous or subsequent 8 images accordingly.
When the search has been completed, the image
corresponding to the specified date and time will be played
back.
3 Click the preview screen for the image
to be played back.
Full-screen playback will start.
z If no image exists for the specified date and time, the
image with the nearest recording date and time will be
displayed.
English
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4
OPERATIONS IN SEARCH MODES
5. MOTION DETECTION SEARCH
1 Select “5. MOTION DETECTION
SEARCH” from the SEARCH menu.
The motion detection search screen is displayed.
By setting images recorded in the hard disk’s normal
recording area or alarm recording area to the motion
sensor, variations from these images as a result of the
presence of an intruder or the like can be detected, and
the corresponding images can be played back.
2 Specify the recording area to be used
for motion searching from “SEARCH
FROM” pull-down menu.
[Settings] (‹ indicates default setting.)
(4) (6)
Setting
Description
Searching will only be performed for images
in the alarm recording area.
‹ALARM
(1)
Searching will only be performed for images
in the normal recording area.
NORMAL
Searching will be performed for images in the
alarm recording area and normal recording
area.
(2)
(3)
ALARM AND
NORMAL
(5)
3 Specify the channel (or camera number)
for searching from “CHANNEL” pull-
down menu.
If the number of channels is one, “-” will be displayed here.
4 Click [SET].
The date and time of the start and end of recording of
motion detection images is displayed in “START” and
“END” respectively.
(7)
(8)
z Use “START” and “END” to make new date and time
settings when the searching range is to be reduced.
z The results of searching will be displayed in a message
box when [SET] is clicked.
(1) SEARCH FROM
The recording area to be used for motion searching
(2) CHANNEL
The channel or camera number to be used for motion
searching
5 Setting motion sensor detection
conditions.
(3) START/END
The date and time of the start and end of the memory area
for motion searching
z Motion sensor positions
The motion sensor setting screen shows an 8 x 10
(height x width) grid of sensors, and when one of these
sensors is clicked, the corresponding sensor setting
mark will turn red. If the same location in the grid is
clicked once again, the motion sensor will be
deselected.
(4) [SET]
Detection condition settings
(5) Message box
This box displays the results of searching for motion-
detection images
z Motion sensor sensitivity
When searching
“SEARCHING”
“FOUND!”
Lower numbers correspond to higher levels of
sensitivity, and a setting should be made from the pull-
down menu.
When motion-detection
images exist
When motion-detection
images do not exist
“IMAGES NOT FOUND!”
6 Click [PREVIEW].
A search is carried out within the specified area for images
in which motion was detected, and these images are then
listed in recording sequence in the preview screen.
(6) MOTION SENSOR SET
Screen for making motion sensor settings
(7) MOTION SENSOR LEVEL
Motion sensor sensitivity setting: OFF or 1 through 10
(Lower numbers correspond to higher levels of sensitivity.)
7 Click the preview screen for the image
to be played back.
(8) [PREVIEW]
Displays a preview of the detection image
Full-screen playback will start.
36
English
Download from Www.Somanuals.com. All Manuals Search And Download.
5 SAVING RECORDED IMAGES
You can use the procedures described below to copy
recorded images to the hard disk’s archive area or to
download images to a PC or the like.
(1) Recording date/time: The recording date and time for
the image currently being played back
(2) PLAYBACK AREA:
These functions should be used to backup important
images from the normal recording area and the alarm
recording area.
The area in which the image currently being played
back is recorded
zNORMAL
zALARM
(3) HOW MANY: Setting for the number of images to be
stored
z Copied data is stored one image at a time. Moving
images can be copied by setting the number of images
required from the first copied image.
z In a single copy operation, a maximum of 10,000
images can be copied to the archive area and a
maximum of 1,000 images can be downloaded to a PC.
(4) Message box: Displays the state of progress for
copying
(5) [START]: Starts copying
1 Play an image from the normal
recording area or the alarm recording
area.
z In certain cases where network-busy is detected as a
result of hardware conditions, the network may be
forcibly disconnected in order to protect DVR recording
operations. Furthermore, the network will be forcibly
disconnected in response to a command to send a
large amount of data in a single operation (in particular,
when 100 images or more are to be saved), and in such
a case, a limit should be applied to the number of
images based on the hardware configuration in
question.
z When the archive area becomes full of images, these
images are to be downloaded to a CompactFlash card
or the like, and [AREA FULL RESET] from the
recording area settings on the MAIN MENU should be
clicked. (JP. 13)
2 Click the
button at the start of the
image to be copied.
Playback of the image is paused.
3 Click the
panel.
button on the operation
The COPY screen is displayed.
4 Input the number of images into “HOW
MANY”.
Specifically, indicate the number of images after the start
image to be copied in succession.
Setting range: 1 to 10,000
z Saving is only possible during full-screen display and
not when multi-screen display is used.
A warning message will be displayed if an invalid number
is entered here.
Copying to the archive area
5 Click [START].
(2)
Copying to the archive area will begin and the message
box will display the current state of progress.
[Settings]
(1)
Setting
Copying
Copying completed
Description
“COPYING TO ARCHIVE AREA!”
“COPY FINISHED!”
z The COPY screen cannot be displayed when playing
(3)
video from the archive area.
6 When copying has been completed,
(4)
(5)
click the
button to display live
button to display
video or the
playback video.
English
37
Download from Www.Somanuals.com. All Manuals Search And Download.
5
SAVING RECORDED IMAGES
Downloading to a PC
z Due to Internet Explorer limitations, the number of
images to download must be set so that all downloads
will be completed within approximately 5 minutes.
Use the following procedure to download recorded images
to a PC.
(2)
5 Select the “AUDIO”.
(1)
[Settings] (‹ indicates default setting.)
Setting
ON
Description
Image audio will be copied.
Audio will not be copied.
‹OFF
z Audio cannot be selected when downloading from the
(3)
archive area.
6 Click [START].
(4)
(5) (6)
Downloading will start and the message box will display
“PLEASE WAIT!”.
(1) Recording date/time: The recording date and time for
the image currently being played back
(2) PLAYBACK AREA:
When all of the specified images have been downloaded, the
image viewer screen will be called up and you will be prompted
to confirm that the corresponding data is to be saved.
The area in which the image currently being played
back is recorded
zNORMAL
zALARM
zARCHIVE
(3) HOW MANY: Setting for the number of images to be stored
(4) Message box: Displays the state of progress for
downloading
(5) AUDIO: Setting for audio
(6) [START]: Starts downloading
7 Click [OK].
1 Play a recorded image.
2 Click the
button when the image to
be downloaded is being played back.
8 Specify a location for storing the data.
„ If storing only video;
Playback of the image is paused.
Select [Save As…] from the Internet Explorer [File] menu,
specify the storage location and file name in the [Web
Page] dialog box, and then click the [Save] button.
z
All images from the normal recording area, alarm recording
area, and archive area can be selected for downloading.
„ If storing video and audio;
Click the [SAVE WITH AUDIO] button, specify the storage
location and file name in the [SAVE WITH AUDIO] dialog
box, and click the [SAVE] button. A confirmation box will
be displayed when saving has been completed, and [OK]
should be clicked here.
3 Click the
panel.
button on the operation
The DOWNLOAD screen is displayed.
4 Input the number of images into “HOW
MANY”.
z Internet Explorer 5.0 or later must be used: Saving of
images will not be possible with earlier versions or other
browsers.
z A time restriction of approximately 2 minutes is applied
to the downloading of audio data, and for this reason,
downloading may not be possible when there are a
large number of images.
Specifically, indicate the number of images after the start
image to be downloaded in succession.
Setting range: 1 to 1000
A warning message will be displayed if an invalid number
is entered here.
38
English
Download from Www.Somanuals.com. All Manuals Search And Download.
5
SAVING RECORDED IMAGES
* Image viewer screen
This screen allows you to check images that have been downloaded.
(4)
(5)
(6)
(7)
(12)
(3)
(2)
(1)
(8)
(13)
(14)
(9)
(10)
(11)
(15)
Thumbnail
(1) [TOP]
(10)IMAGE NUMBER
Displays the first image.
Displays the number of the image currently being played
back.
(2) [PREV.]
Moves to the previous image.
(11)[PLAY AUDIO]
Plays back the audio (you can also play back both audio
and image on the screen).
(3) [R.PLAY]
Starts reverse playback. When the first image is reached,
reverse playback will automatically continue from the last
image.
(12)CHANNEL
Displays the download channel (or camera number).
(4) [STOP]
(13)TIME
Stops playback.
Displays the recording date and time for the image
currently being played back.
(5) [PLAY]
Starts playback. When the last image is reached, playback
(14)DOWNLOAD COUNT
will automatically continue from the first image.
Displays the download progress in the form of “image
currently being downloaded/total number of images to be
downloaded”. (If recording do not exist for all entered
images, the overall number will be restricted to the
recorded number.)
(6) [NEXT]
Moves to the next image.
(7) [END]
Displays the last image.
(15)[SAVE WITH AUDIO]
Saves both the image and audio.
(8) IMAGE SIZE
Sets the size of the display image.
1
2
3
400 × 300
640 × 480
800 × 600
4
5
1,024 × 768
1,280 × 960
z Windows Media Player must be installed in order to
playback audio using Image Viewer.
z Audio and video may not synchronize in Image Viewer.
If it is important that audio and video be in perfect
synchrony, DVR Viewer should be used for playback.
(9) PLAY SPEED
Sets the playback speed.
1
2
3
1 sec
4
5
0.125 sec
0.05 sec
0.5 sec
0.25 sec
* The playback speed values will depend on the computing
power of the PC being used.
English
39
Download from Www.Somanuals.com. All Manuals Search And Download.
1 DVR VIEWER
The DVR Viewer is a program designed specifically for
DVRs. It can be used to play back image and sound data
that has been copied onto media such as computer hard
disk drives, CompactFlash cards.
3 Starting the installation
Click [Next>] in the [Welcome to the InstallShield Wizard
for DVR Viewer] window to start the installation process.
The DVR Viewer can be downloaded from the Sanyo
website at the URL given below.
Sanyo website URL:
z When playing back sound data, you will need Version
1.5 or later.
Operating environment
The following operating environment is required in order to
use the DVR Viewer.
z Applicable operating system: Windows 98, 98SE, Me,
NT4.0, 2000, XP
z Applicable computer: PC/AT compatible computer
running one of the above operating systems
4 Choosing the destination location
Check that the destination folder shown in the [Choose
Destination Location] window is correct, and then click
[Next>].
If you would like to change the folder, click [Browse...] and
specify the desired folder.
z If an older version of DVR Viewer or ActiveX is installed,
remove them from [Control Panel] → [Add or Remove
Programs] in advance.
Installing the DVR Viewer
Install the DVR Viewer by the following procedure.
1 Starting the installation wizard
Double-click the icon for the downloaded “Setup.exe” file
to start the installation wizard.
5 Starting copying of files
Check that all the settings shown are correct, and then
click [Next>]. Copying of files will then start. If you would
like to change any of the settings, click [<Back].
6 Completion of installation
When the installation is complete, the [Maintenance
2 Selecting the language settings
Select the display language for the software (English) in
the [Choose Setup Language] window and then click [OK].
Complete] window appears. Click [Finish].
40
English
Download from Www.Somanuals.com. All Manuals Search And Download.
1
DVR VIEWER
Closing DVR Viewer
Opening and closing DVR Viewer
Click the close button in the top-right corner of the program
window, or select [Exit (X)] from the [File (F)] menu to
close DVR Viewer.
Opening DVR Viewer
From the Start menu, select [Programs] → [DVR Viewer]
→ [DVR Viewer] in the sequence to start the program.
When DVR Viewer starts up, the following default window
appears.
Menu structure
The basic menus for DVR Viewer are located on the menu
bar and tool bar in the upper-left of the window. Click a
command to open the corresponding menu.
Menu bar
This is the basic menu for DVR Viewer. Click a command
to view the details for that command.
(1)
(2)
(3)
z If you create a shortcut icon for DVR Viewer on the
desktop, you can open DVR Viewer quickly by double-
clicking the shortcut icon.
(1) File (F)
To create a shortcut icon, right-click [Programs] →
[DVR Viewer] → [DVR Viewer] in the Start menu, drag
the name to a spare place on the desktop, and select
[Copy Here].
Open (O): Displays the Open file dialog box.
Print (P): Prints the specified file.
Title Input (T): Displays the dialog box for entering titles for
printed images.
Exit (X): Closes DVR Viewer.
(2) View (V)
Toolbar (T): Displays and hides the toolbar.
Status bar (S): Displays and hides the status bar at the
bottom of the window.
Separate (P): Moves the boundary line at the bottom of the
window up and down.
Date Display Format (D): Sets the date display format.
(3) Help (H)
Displays the version information for the DVR Viewer that is
currently open.
English
41
Download from Www.Somanuals.com. All Manuals Search And Download.
1
DVR VIEWER
Toolbar
This contains commands that are most often used.
z To play back sound, be sure to specify a folder that
contains “WAV” files.
z This digital video recorder does not support the “Open
images on CD-R” option in the dialog box.
(1) (2) (3)
To open images on a CD-R, select the CD-R drive name in
question using the “Open a folder with JPEG images” in
the dialog box.
(1) Corresponds to the [Open (O)] command in the [File
(F)] menu.
(2) Corresponds to the [Print (P)] command in the [File
(F)] menu.
(3) Corresponds to the [Help (H)] command.
Opening files
When DVR Viewer is opened, you can open files to be
played back by the following procedure.
1 Click [Open (O)] in the [File (F)] menu.
Alternatively, click the
icon on the toolbar.
2 Specify the drive and folder containing
the file to be opened.
In the [Open] dialog box, use the radio buttons to select
one of the following two options depending on the type of
media that contains the image data.
(1) Open a folder with JPEG images
Select this option if you would like to open JPEG images
that have been copied from a DVR to a CompactFlash
card or that have been downloaded to the computer over a
network.
Click [Browse...] to display the folder tree. Specify the
folder to be viewed and then click [OK].
If you would like thumbnail images to appear, check [Show
Thumbnails].
42
English
Download from Www.Somanuals.com. All Manuals Search And Download.
1
DVR VIEWER
Viewing images
When image files are opened, the images that have been loaded appear. The display window consists of a main window and
a thumbnail window, and you can use various operations in these windows such as a slideshow.
(1)
Time
01/ 01/ 2004 10:15:10
stamp
(3)
01/01/2004 10:15:10
(2)
000001.jpg
000002.jpg
000003.jpg
000004.jpg
000005.jpg
(1) Main window
(2) Thumbnail window
When you double-click a thumbnail image, the image
appears larger in the main window.
When files are opened, the image whose file name has the
smallest number will be displayed.
All images that are stored in the specified folder appear as
thumbnail images (compressed images) in ascending
order of filename number. Thumbnail images that will not
fit in the window can be viewed using the scroll bar.
(3) Control panel (JP. 44)
English
43
Download from Www.Somanuals.com. All Manuals Search And Download.
1
DVR VIEWER
(3) Control panel
This is used for playback operations in the main window and to adjust the images.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
01/01/2004 10:15:10
(11)
(12)
(13)
(14)
(1) [TOP]
Moves to the start of a slideshow.
(9) IMAGE SIZE (Default setting: 1)
The display size for images in the main window can be set
to one of five sizes.
(2) [PREV]
To display large image, select higher values.
Moves to the previous image in a slideshow regardless of
1
2
3
400 × 300
640 × 480
800 × 600
4
5
1,024 × 768
1,280 × 960
the setting for “(8) SKIP”.
(3) [RPLAY]
Reverses back of the slideshow by skipping through the
number of images specified by “(8) SKIP”.
(10)PLAY SPEED (Default setting: 3)
The playback speed for slideshows can be set to one of
five speeds.
(4) [STOP]
Stops the slideshow.
1
2
3
1 sec
4
5
0.125 sec
0.05 sec
0.5 sec
0.25 sec
(5) [PLAY]
Starts continuous playback of the slideshow by skipping
through the number of images specified by “(8) SKIP”.
(6) [NEXT]
Moves to the next image in a slideshow regardless of the
setting for “(8) SKIP”.
z The actual playback speed may vary depending on the
computer’s performance.
(7) [END]
Moves to the end of a slideshow.
(11)IMAGE NUMBER
Shows “Current image number/Total number of images”.
(8) SKIP (Default setting: 1)
This sets the number of images that are skipped when
playing and reverse playing slideshows. When using the
default setting (= 1), all images are played back one at a
time.
(12)TIME
Shows the time stamp for the displayed image.
Setting values: 1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 100, 200
z The day, month and year order is defined by the
settings at the computer.
(13)TIME POSITION (Default setting: LOWER RIGHT)
This specifies the display position for the time stamp.
Available settings: LOWER RIGHT, UPPER RIGHT,
UPPER LEFT, LOWER LEFT
(14)Playback Audio
If this box is checked for a video file with audio, audio
playback will be possible.
44
English
Download from Www.Somanuals.com. All Manuals Search And Download.
1
DVR VIEWER
4 To display titles
Printing images
To display titles for the images being printed, select [Title
Input (T)] from the [File (F)] menu to display the Title Input
dialog box.
Specified images can be printed as full screens together
with date and time information.
1 To print the image in the main window
Select [Print (P)] from the [File (F)] menu, or click the
icon on the toolbar. The Windows print dialog box appears.
Make any settings that are required such as selecting the
printer and the number of copies to be printed, and then
click [OK]. The main window will then be printed with the
time stamp embedded in the image.
2 To print thumbnail images
Click the thumbnail image to be printed so that it appears
z The title entered will appear underneath the printed
image. Up to 10 entered titles can be saved and
selected from a list.
in blue, and then repeat procedure 1 above.
01/01/2004 10:15:10
3 To print several images all at once
Hold down the [Ctrl] key on the keyboard, and then click on
the images to be printed in the thumbnail window to select
them. To select a contiguous range of images on the same
line, hold down the [Ctrl] key and the [Shift] key
simultaneously and then select the images. After selecting
the images to be printed, carry out procedure 1 above. The
selected images will then be printed one by one.
01/01/2004 10:15:10
English
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|