INSTRUCTION MANUAL
DVD Recorder
DVR-S120
OK
PUSH OPEN
Problems with set up?
Call 0870 240 7475
Calls cost a maximum of 8p per
minute during peak periods,
based on BT rates of April 2004.
Please read this manual carefully before connecting your DVD Recorder and operating it for the first time.
Keep the manual in a safe place for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
PRECAUTIONS ............................................................. 1
DISC PLAYBACK ........................................................ 23
IMPORTANT ...............................................................................1
Basic Operations.......................................................................23
ACCESSORIES ..........................................................................2
LISTENING TO MUSIC ...................................................... 24
Playable Discs...........................................................................24
Basic Playback Operations .......................................................24
Repeat Playback, Random Playback, Intro Playback...............25
Playing Back a Specific Track...................................................25
Playing Back from a Specific Point by Time Search .................25
PART NAMES & FUNCTIONS ...................................... 3
Front Panel .......................................................................... 3
Rear Panel ........................................................................... 4
Remote Control ................................................................... 5
Playing Back MP3 Discs................................................... 25
Operation Status Display ................................................... 6
Front panel display......................................................................6
Status display on TV screen........................................................7
VIEWING JPEG CD PHOTOS & IMAGES......................... 26
Playable Discs...........................................................................26
Displaying the Thumbnail Screen..............................................26
Searching for Photos in the Thumbnail Screen.........................26
Displaying Photos in the Slide Show.........................................27
Disc Information ........................................................... 7
Recordable Discs................................................................ 7
EDITING & DISC MANAGEMENT............................... 28
Playable Discs..................................................................... 8
Notes on handling discs..............................................................8
Cleaning discs for high quality recording ....................................8
About Titles, Chapters and Tracks ..............................................8
Editing Chapters ............................................................... 28
Insert Chapter ...........................................................................28
Hide Chapter.............................................................................28
Unhide Chapter.........................................................................28
Delete Chapters(Delete Chapter, Delete All).............................28
INSTALLATION, CONNECTION & SETTING THE
Editing Titles...................................................................... 29
Editing Recording Titles (name)................................................29
Playback Title ...........................................................................29
Erasing a recording/title ............................................................29
CHANNEL...................................................................... 9
Connecting to a TV and Various AV Equipment............... 9
Connecting to a TV......................................................................9
Connecting a satellite receiver.................................................. 11
Connecting audio equipment .................................................... 11
Connecting to a video deck and other recording equipment.....12
Disc settings...................................................................... 29
Changing the Disc Name ..........................................................29
Erasing DVD+RW Discs............................................................29
Finalising DVD+R Discs............................................................30
Make DVD Compatible..............................................................30
Connecting the Main Lead ............................................... 14
Initial Settings.................................................................... 14
Auto-setting the channel.................................................. 15
Setting the Clock............................................................... 15
DVD RECORDER SETTINGS ..................................... 31
TV Screen Settings ........................................................... 31
Audio Output Settings...................................................... 32
Operation and State Display Settings............................. 32
Setting the Language........................................................ 33
Recording Settings ........................................................... 34
Manually Setting the Reception Channel........................ 15
Displaying the channel setup screen ........................................15
Manually setting the channel.....................................................15
Arranging and Deleting Channels .............................................16
RECORDING................................................................ 17
Recording Programmes during Reception..................... 17
Parental Level Control...................................................... 34
Setting parental level control.....................................................34
To play back a DVD video set with parental level controls........35
Timer Recording................................................................ 18
Timer recording by “Video Plus+ code”.....................................18
TROUBLESHOOTING................................................. 36
Timer recording without using “Video Plus+ code” ....................... 20
Checking, Changing and Deleting Reservations.......................21
Problem solving for programmed recordings ............................21
MAINTENANCE........................................................... 38
Cleaning the cabinet .................................................................38
Recording Video from Other AV Equipment................... 22
Inserting New Recordings on a DVD+RW....................... 22
SPECIFICATIONS........................................................ 38
SAT Record
(Automatic recording from Satellite Receiver)............... 22
ACCESSORIES
RB-S120 remote control x 1
R6 (HP 7) battery x 2
Audio/Video lead x 1
75-ohm coaxial aerial lead x 1
DVD+RW blank disc x 1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES & FUNCTIONS
Front Panel
You can operate the DVD recorder using the remote control or the buttons on the front panel of the DVD recorder.
2
1
3
4
5
6
7
8
9
10 11
12 13 14
1
2
To switch on or standby.
Open/close disc tray.
Playback button: To play back a disc.
p.14
p.17, 23
p.23
o
rOPEN/CLOSE
w
3
4
Stop button: Interrupt playback/recording.
Previous: Select previous chapter or track.
Next: Select next chapter or track.
p.17, 23
p.23
e
5
d
6
p.23
f
7
REC MODE
qREC
S-VIDEO
VIDEO
Record type (quality): To select different qualities of recording (HQ, SP, LP, EP or EP+).
Record: Record from the preselected input.
p.17
8
p.17
9
AV3-S IN: Connection of SVHS/Hi8 camcorders or SVHS/Hi8 video recorders.
AV3 IN: Connection of camcorders or video recorders.
p.13
10
11
p.13
L-AUDIO-R
AV3/AV3-S IN: Connection of camcorders or video recorders. This is common audio for both
S-Video and Video.
p.13
12
13
14
DV IN
Digital video input: To connect a digital camcorder or other suitable device.
To select the previous programme number.
p.13
p.17
p.17
CHANNEL-
CHANNEL+
To select the next programme number.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
1
3 4
8
9
10
2
5
6
7
1
2
3
ANTENNA IN
Aerial input: Socket into which aerial input is connected.
p.9
p.9
ANTENNA OUT
Aerial output: Socket from where aerial output is connected to TV set.
COMPONENT VIDEO OUT
Video output: Socket from where YUV (Component Video) output is connected to YUV Video
compatible input devices (Progressive scan TV, etc).
p.10
4
VIDEO OUT
Video output: Socket from where Video (Composite Video) output is connected to Video
compatible input devices.
p.10
p.10, 12
p.13
5
6
AUDIO OUT
Analogue audio output: Socket from where audio output is connected to audio input devices.
S-VIDEO OUT
Video output: Socket from where S-Video output is connected to S-Video compatible input
devices.
7
DIGITAL AUDIO OUT
Digital audio output: Socket into which digital audio input devices can be connected (ampli-
fier/receiver).
p.11
8
9
AV 2
SCART socket 2: Connect to external equipment.
SCART socket 1: Connect to the TV set.
Plug into the power source.
p.11
p.9
AV 1(TO TV)
Mains lead
10
p.14
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
12 DISC
To show the DVD menu or the disc
menu.
p.29
MENU
13 EDIT
Displays the edit menu for DVD+RW
discs, for inserting, deleting and hiding p.28
chapters
4
3
1
2
5
14 DISPLAY
To display the status display and the
channel / clock display
p.7
7
6
15
16
Cursorkeys:Left,right,up,downnaviga- p.15
4682
k
tion keys.
p.16
Applies the details you have selected
or entered.
p.14
8
17
18
19
Record from the preselected input.
To play back a disc.
p.17
p.23
RECq
w
10
9
Stop playback / recording, except with p.17
programmed recordings (TIMER).
e
11
16
12
15
14
p.23
OK
20 REC MODE
To select different qualities of recording
(HQ, SP, LP, EP or EP+). Lower the
quality of recording higher than the time
of recording.
13
17
p.17
19
18
20
21
24
21
Pause: If this button is pressed during
playback, the playback pauses. You
will see a still picture. If this button is
pressed during recording, the recording
pauses.
Each press of this button during a play-
back pause feeds the video one frame
at a time to display still images.
PAUSE s
23
22
27
26
p.23
25
31
30
28
29
22
23
24
25
With single press of the button during
playback, DVD recorder will go back the p.23
previous chapter or previous track.
PREV d
NEXT f
With a single press of the button during
playback, the DVD recorder will start p.23
playing the next chapter or next track.
1
2
To switch set on or standby, interrupt
menu function, interrupt a programmed
recording (TIMER).
o
p.14
p.17
Playback the disc backwards at a slower
speed.Eachpressofthebuttonchanges p.23
the speed.
R.SLOW z
F.SLOW x
TIMER
To program a recording with the Video
Plus+ system / without the Video Plus+
system or to alter/clear programmed
recordings.
p.18
Playback the disc forwards at a slower
speed.Eachpressofthebuttonchanges p.23
the speed.
3
4
CLEAR
To delete last entry or clear programmed
recording (TIMER).
p.21
26
27
The disc is fast-reversed. Each press of
p.23
F.REV c
the button changes the speed.
r
Open/Close the disc tray.
p.17
p.23
Thediscisfast-forwarded.Eachpressof
p.23
F.FWD v
the button changes the speed.
5
6
7
0..9
Number buttons: 0 to 9.
p.18
-
28 TV/DVD
Press this button to select between DVD
p.18
RETURN
SELECT
Return to previous menu on a VCD.
When entering text, press this button to
selectbetweenuppercaseandlowercase p.30
characters.
recorder images and TV set images.
29 ZOOM
Enlarge the video image.
p.23
p.24
p.23
30 T/C
This button evokes the T/C Tools menu,
which provides titles, chapters, zoom,
angle, slow, search, audio, step, sound
and subtitles options.
8
TV
Selects the tuner image built into the
DVD recorder.
p.17
9
To select the next programme number.
31 PLAY MODE
Selects the Play Mode.
p.17
p.17
CH/INPUT +
10
To select the previous programme
number.
CH/INPUT -
11 SYSTEM
Call up/cancel the System Menu.
p.31
MENU
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting batteries
Install two “R6 (HP 7)” batteries.
Remote control range
Remote sensor
Within approx.
6 meters
30°
30°
NOTE:
-
Removethebatteriesiftheremotecontrolisnottobeusedforamonth
or more. Batteries left in the unit may leak and cause damage.
Operation Status Display
Front panel display
1
2 9
3
4 5
6
20
17
19
HQ
REM
NICAM
VPS PDC
8
7
10
SP
LP
EP
EP
REC
D
DVD RW
PBC
ANGLE
12 13 11 14 15 16
18
These symbols can light up on your DVD recorder display:
1
2
3
Playback in progress.
w
Playback/record interrupted (Pause).
s
VPS/PDC
Video Programming System / Programme Delivery Control: A VPS or PDC code will be transmitted for the selected
TV program.
4
5
REM
Displays the Title/Track time remaining
A recording (timer) has been programmed.
6
NICAM
The DVD recorder has detected a Nicam audio signal.
Recording in progress.
7
REC
8
Lights when playing a disc recorded with Dolby Digital Audio.
Lights when playing a disc recorded with DTS.
Lights when progressive video is being output.
Displays the type of DVD disc in the recorder: DVD /DVD+R / DVD+RW.
Displays the angle information of the DVD video disc.
Play Back Control.
D
9
dts
10
11
12
13
14
15
16
17
18
19
P
DVD+RW
ANGLE
PBC
T
Displays the current title number (DVD).
TR
Displays the track selected/played (CD).
C
Displays the chapter selected/played (DVD).
During playback a HiFi/2 channel tone was detected or a HiFi/2 channel tone was received.
Channel/programme number.
ST
CH
HQ, SP, LP, EP, EP+
Displays the recording quality selected during recording. Recording qualities HQ, SP, LP, EP or EP+ are shown
on the recorder display.
20
Multi-function display.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Status display on TV screen
Disc Information
TheDVDstatusisalsodisplayedontheTVscreen.Thestatusisdisplayed
in the Status Display and Channel/Clock Display.
Record
Recordable Discs
DVD+RW
Status Display
0:00:13 / 0:29:47
Title 1 : 01/01
Disc Type
Logo Mark
OTR 00:30
DVD+RW
DVD+R
AV1
Channel/Clock
Display
23:31
.. ..
:
NOTE:
-
Even if the type of the discs is DVD+R/RW, the following discs cannot
be recorded.
Double Layer discs, High Speed discs of 4X speed or faster.
Only the above types of discs can be recorded on this unit.
DVD-RAM, DVD-RW, DVD-R, CD-R, CD-RW, etc. cannot be
recorded.
Status Display
-
When you set “Feature” - “Status Display” at “System Menu” to ON,
the Status Display is displayed for several seconds when the DVD is
operated.
-
-
Fingerprints and small scratches on a disc can affect recording and/or
playback performance. Please take proper care of your discs.
Insomecases,youmaynotbeabletoaddnewrecordingstoDVD+RWs
that contain recordings made on other DVD Recorders or PCs.
To display the Status Display all the time, press DISPLAY.
Pressing DISPLAY while the Status Display is displayed hides the Status
Display.
The following information is displayed in the Status Display:
Operating mode
Unrecordable pictures
Record
• Pictures with copy protection cannot be recorded on this unit.
• When the unit receives a copy guard signal while recording, the unit
cannot record correctly.
• Only Audio input cannot be recorded without entering a Video signal.
• Video games cannot be recorded.
Disc type
DVD+RW
0:00:13 / 0:29:47
Timeelapsedfromstartoftitle/overall
time of title
Title 1 : 01/01
DVD:TitleNo.:currentchapterNo./to-
tal number of chapters
CD: Track No.: current track No./total
number of tracks
OTR 00:30
Important Note:
-
SANYO takes no responsibility for recording failure due to power
cuts, defective discs, or damage to the unit, etc.
Play Mode (during playback) or OTR
Status (during recording)
NOTE:
-
If an attempt is made to perform an operation that is not supported in
the DVD state at this time, “ ” is displayed to the right of the Status
Display.
Channel/Clock Display
The Channel/Clock Display is displayed at the bottom right of the TV
screen. Pressing DISPLAY on the remote control switches between
display/hide of the Channel/Clock Display.
The following information is displayed in the Channel/Clock Display:
The channel currently being received
or the currently selected input is
AV1
displayed.
When you want to change the input
source from Preset programme to
External input, press ”00”. AV1 will be
selected.
23:31
.. ..
:
Current channel/selected input.
No signal (TV channel is not
available/additional device is not
connected or is switched off.)
Current time.
Time when the next timer reservation
is begun.
Timewhenthereservationisclosed
during recording.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on handling discs
• Do not expose the disc to direct sunlight, high humidity or high tem-
peratures for extended periods of time.
Playable Discs
Disc Type
Logo Mark
• Discs should be returned to their cases after use.
• Do not apply paper or write anything on the disc surface.
• Handle the disc by its edge. Do not touch the playing surface (glossy
side).
DVD video
DVD+RW
DVD+R
Audio CD
NOTE:
• Fingerprints and dust should be carefully wiped off the playing surface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
• Never use chemicals such as record cleaning sprays, antistatic sprays
or fluids, benzene or thinner to clean discs.
-
Only the above types of discs can be played on this unit.
DVD-Audio, DVD-ROM, DVD-RAM, DVD-RW (VR mode), CD-ROM,
CVD, SACD, etc. cannot be played.
Region number (Regional restriction code) is built-in to the unit
and DVD discs.There is a region number on the rear of the unit.
DVD video discs having a region code “2” or “ALL” can be played on
this DVD recorder.
The WMA files cannot be played back.
For MP3. CD, see Page 25.
For Picture/JPEG CD, see Page 26.
There are the marks on some DVD disc packages.
Example:
-
Cleaning discs for high quality recording
Fingerprints and dust should be carefully wiped from the signal surface
of the disc (glossy side) with a soft cloth.
-
-
-
-
Wipe in a straight motion from the centre to the outside of the disc.
Yes
No
Region number
Multiple languages
Multi-aspect
Multi-angle
About Titles, Chapters and Tracks
Title
The longest section of a movie or music feature on DVD. Each title is
assigned a title number, enabling you to locate the title you want.
Multi-language subtitles
Closed caption
Chapter
Sections of a picture or a music piece on a DVD that are smaller than
titles. A title is composed of several chapters. Each chapter is assigned
a chapter number enabling you to locate the chapter you want.
-
-
Some DVD+R/DVD+RWs cannot be played back depending on the
recording conditions.
This unit can play back the DVD-R that has recorded movie data as
well. However, some DVD-Rs cannot be played back depending on
the recording conditions.
Title 1
Title 2
-
-
TheDVD-RW(Videomode)canbeplayedback.However,someDVD-
RWs cannot be played back depending on the recording conditions.
The DVD-RW (VR mode) cannot be played back.
This unit is to be used exclusively with the PAL (or NTSC) colour
system discs. SECAM system discs cannot be used with this unit.
Chapter 1 Chapter 2
Chapter 1
Chapter 2
Chapter 3
AudioCDdiscsaredividedintotracks.Normally,onesongistheequivalent
of one track.
Track 1
Track 2
Track 3
Track 4
Track 5
Thisproductincorporatescopyrightprotectiontechnologythatisprotected
by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION, CONNECTION & SETTING THE CHANNEL
NOTE:
-
-
-
Do not connect the mains lead to an AC outlet until all connections have been made.
Please refer to the instruction manuals for the equipments that you are connecting (TV, VCR, etc.).
When you connect the unit to your TV and other equipment, be sure to turn off the power and disconnect all of the equipments from the AC outlet
until all the connections have been made.
Follow the procedure below to prepare to use the DVD recorder.
Connect to a TV and various AV equipment. (See pages 9 to 13.)
L
Start initial setting by connecting the Mains Lead. (See page 14.)
L
Set the language and initial settings. (See page 14.)
L
Automatically set the channel. (See page 15.)
L
Set the clock. (See page 15.)
L
Manually set the channel. (See pages 15 to 16.)
Connecting to a TV and Various AV Equipment
Connecting to a TV
Aerial and TV connections
TV
Aerial
To SCART socket
To RF input
Aerial lead
(not supplied)
Aerial lead
SCART lead
(not supplied)
NOTE:
-
When the DVD recorder is connected by the SCART socket connector cable, the VIDEO OUT or S-VIDEO OUT socket connection is not neces-
sary.
-
Do not connect the aerial and VCR as shown below.
VCR
DVD recorder
TV
DVD recorder
VCR
TV
9
Download from Www.Somanuals.com. All Manuals Search And Download.
When connecting to a TV without a SCART terminal
Connection without using the SCART socket cable
Connecting to a TV with the audio/video lead
If your TV has a video input socket, connect the unit as shown.
AUDIO
VIDEO
INPUT
1
S-VIDEO
R-AUDIO-L VIDEO
Audio/video lead
Connecting to a TV with an S-video and audio leads
If your TV has an S-video input socket, connect the unit as shown. You can enjoy clearer picture play. (The VIDEO OUT socket connection is not TV.)
Audio lead (not supplied)
AUDIO
VIDEO
INPUT
1
S-VIDEO
R-AUDIO-L VIDEO
S-video lead (not supplied)
When connecting to a TV with a component video input terminal
If your TV has Component Video inputs, you can enjoy superior picture quality.
Use component cables (not supplied) to connect the COMPONENT output on the unit to the COMPONENT input on the television.
In this configuration, the Red and White audio connections are required.
Y
PB
PR
L
R
Component video lead
(not supplied)
COMPONENT IN
Audio lead
(not supplied)
TV
Y
AUDIO IN
PB
PR
L
R
NOTE:
-
The DVD recorder DVR-S120 can be used connected to a progressive video-compatible TV or display.
In this case, change the YUV Output item from “Interlace” to “Progressive” referring to “TV Screen Settings” at “DVD Recorder Settings”.
(See page 31.)
-
-
Change Video Output in setting items related to Video in the System Menu to “S-video + YUV” or “Video + YUV”. (See page 31.)
When using component connections, please remove all other video output connections.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a satellite receiver
For Digital Cable and Satellite TV users please connect your decoder’s output to this unit’s input.
Use a SCART cable (not supplied) to connect the AV2 (Scart socket) on this unit to the SCART OUT socket on the satellite receiver.
Satellite Receiver
SCART lead
(not supplied)
DVD Recorder
NOTE:
-
While viewing the images from the Satellite Receiver on the TV screen, TV images will disappear when DVR-S120 turns on.
Connecting audio equipment
As an alternative to using the TV’s speakers, the sound can also be played back through a digital or analog amplifier.
Connecting to a digital audio device
Connect an amplifier with Dolby Digital and DTS decoders to enjoy surround sound.
Use a fiber-optic cable (not supplied) to connect the DIGITAL OUT OPTICAL (digital optical output) on the unit to the digital optical input on a stereo
amplifier or a receiver.
To digital audio input
Digital multi-channel
AV amplifier
Optical lead
(not supplied)
Before connecting, remove
the protective cap from the
socket. Replace the cover
when the socket is not in use.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a stereo audio amplifier or receiver
Use an audio cord to connect the AUDIO OUT on the unit to the audio input on a stereo amplifier or a receiver.
L
R
Audio lead
(not supplied)
IN
L
R
Stereo audio amplifier
or receiver
Connecting to a video deck and other recording equipment
Video images from other video equipment can be recorded on the DVD recorder, and video images on the DVD recorder can be recorded on other
video equipment.
Connection for recording video images on the DVD recorder to other video equipment
You can use this unit as a source player or as a recording deck.
Connect a VCR or similar recording equipment to the AV2 (SCART), S-VIDEO OUT, or VIDEO OUT sockets.
NOTE:
-
When using the AV2(SCART) as a connecter, you can only record the contents on a disc when playing back on a DVD recorder, to other recording
equipment.
VCR, etc.
SCART lead
(not supplied)
VCR, etc.
AUDIO
VIDEO
INPUT
1
S-VIDEO
R-AUDIO-L VIDEO
Audio/video lead
12
Download from Www.Somanuals.com. All Manuals Search And Download.
When connecting a VCR, etc. having an S-video terminal, connect by an S-video lead.
Audio lead (not supplied)
VCR, etc.
AUDIO
S-VIDEO
R-AUDIO-L VIDEO
VIDEO
INPUT
1
S-video lead (not supplied)
Connection for recording video images from other video equipment on the DVD recorder
DV camcorder,etc.
DV camcorder,etc.
A/V
S-video lead
OUTPUT
A/V
OUTPUT
SOCKETS
SOCKETS
(not supplied)
S-VIDEO
S-VIDEO
VIDEO
VIDEO
R
AUDIO
L
R
AUDIO
L
Audio/video lead
Audio lead
(not supplied)
Open the lid.
Open the lid.
Connecting to a DV camcorder
You can use this unit to record from a DV camcorder when connected with a 4-pin DV lead (not supplied).
Connect a DV camcorder or similar recording equipment to this unit as shown.
DV camcorder,etc.
DV
OUT
DV lead
(not supplied)
Open the lid.
NOTE:
-
When a disc tray is opened, DV-IN can not be selected.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Main Lead
After all connections have been made, connect the mains lead to an
AC outlet.
When the power supply is connected for the first time, the initial setup
screen will automatically be displayed.
Follow the on-screen instructions to make the initial settings.
Setting Item
TV Shape
Explanation
Set the aspect ratio (shape) of yourTV’s screen. When
you press the k button, the selection items are
displayed. Select the desired item using 8 or 2, and
press the k button.
4:3 LB:
Select this when a standard size TV is
connected. When a wide-screen image
(16:9)isplayedatthissetting, blackbands
(letterboxes) appear at the top and bottom
of the screen.
NOTE:
-
-
If the initial setup screen is not displayed, turn the power OFF, and
connect the main lead to an AC outlet with the power button o
held down. Hold down the power button o until the setup screen
is displayed.
At the time, turn the power off the other equipment connected toAV2.
(When the equipment connected to AV2 is on, the above operation
may not work.)
Initial Settings
First, set the language and make the settings on the TV currently con-
4:3 PS:
SelectthiswhenastandardsizeTViscon-
nected. When a wide-screen image (16:9)
is played at this setting, the left and right
edges of the image are not displayed.
nected.
1. Select the item to be changed using 8 or 2, and change the set-
tings.
Press Choose Settings.
OK
Audio
English
Off
Subtitle
Menu
Cut off
Cut off
English
Austria
16:9:
Select this when a wide-screen TV is con-
nected. Also set the TV to wide screen.
Country
TV Shape
4:3 LB
Press SYSTEM to Continue
Setting Item
Audio
Explanation
Set the DVD audio language. When you press the
kbutton, theselectionitemsaredisplayed. Select
the desired item using 8 or 2, and press the k
button.
2. When you have finished the settings, press SYSTEM MENU to
advance to automatic setting of the reception channel.
Subtitle
Set the DVD subtitle language. If subtitle language
is not available, the DVD recorder picks the first
available language.
When you press the k button, the selection items
are displayed. Select the desired item using 8 or 2,
and press the k button.
Menu
Set the menu display language.
When you press the k button, the selection items
are displayed. Select the desired item using 8 or 2,
and press the k button.
Country
Choose the country that uses this DVD recorder.
When you press the k button, the selection items
are displayed. Select the desired item using 8 or 2,
and press the k button.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto-setting the channel
Manually Setting the Reception Channel
1. The following screen is displayed. Check the antenna connection and
In some cases, not all of the available TV channels may have been found
and stored during initial installation. In this case, you will need to search
for and store the missing or coded TV channels manually.
press the k button.
Connect Antenna
Displaying the channel setup screen
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
Please Connect
2. Press SYSTEM MENU to display the System Menu.
3. Select “Setup” using 8 or 2, and press 6 once. The setting items
at “Setup Options” on the right of the screen can now be selected
using 8 or 2.
Your Antenna Now!
Press OK to Continue
Setup Options
Auto Install
2. The automatic TV channel search starts and a progress bar is shown.
This allows the DVD recorder to save all available TV channels. This
procedure may take several minutes.
Manual Search
Sort TV Channels
Date and Time
Auto Install Channels
Please Wait... Searching for Channels.
Press OK to Select or "Left Arrow" to Exit
00 Channels Found
In this screen, set the reception channel by the following procedure.
Manual Search
L
ManualChannelSearch,hereyoucanchoose
and install channels of interest.
CLEAR to Cancel, STOP to Save
Sort TV Channels
Sorting the TV Channels.
NOTE:
Manually setting the channel
-
To cancel automatic setting of the channel, press e.Advance to step
Perform the following operation in the Setup Option screen.
3.
1. Select “Manual Search” using 8 or 2 and press the k button.
3. When the bar is displayed to the right side, press SYSTEM MENU
Setup Options
Auto Install
to advance to the clock setup.
Auto Install Channels
10 Channels Found
Manual Search
Sort TV Channels
Date and Time
Press OK to Select or "Left Arrow" to Exit
Press SYSTEM to Save and Exit
2. Specify whether to set the channel by frequency or channel No.
Manual Channel Search (Page 1)
OK
Channel/Freq.
Entry/Search
Program #
Freq.
Setting the Clock
1. Press 4 or 6 to move to the item (Day, Month, Year, Time) to enter,
0.0
1
and press the 8 or 2, or 0 to 9 number buttons to set the time.
Channel Name
Set Date and Time
Month
Year
Day
Press OK to Select or "Left Arrow" to Exit
Date
Time
20
05
01
/
01
/
NOTE:
:
01
01
-
-
-
“Freq.”: Select this to set the channel by frequency.
“Program”: Select this to set the channel by channel No.
“S-Channel”: Select this to set the channel by special channel when
you are using your TV with cable TV, for example.
Press SYSTEM to Save and Exit
2. To end setting, press SYSTEM MENU.
Make sure that the time is displayed correctly on the front panel.
NOTE:
-
After Clock is set, the power will be turned off(standby) automati-
cally.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Thesearchforchannelsthatcanbereceivedbeginsfromthesmallest
frequency or channel No. of the channel displayed at “Entry/Search”
and increases upwards to larger values.
Arranging and Deleting Channels
After you have performed the automatic channel search, you may not
agree with the sequence in which the individual TV channels have been
allocatedtotheprogrammepositions(programmenumbers).Youcanuse
this function to rearrange the TV channels already stored or to delete TV
channels you do not want or those with poor reception.
When the desired channel is found, changing of the number value
comes to a stop. Press 2 to advance to the “Programme #” item.
4. At the “Programme #” item, specify which channel on the TV the
reception channel specified in step 3 is to be viewed.
NOTE:
Using 4 or 6 in “Programme # “, select the programme number you
want to use for the TV channel, e.g. “01”.
-
The teletext clock resets automatically.
If you store a TV channel which transmits TXT/PDC on programme
number “P01”, the date and time will automatically be transmitted
and constantly updated. As a result, the changes from summer time
to winter time and back again will be made automatically.
NOTE:
-
Programmes cannot be reserved correctly if you do not make the
correct settings.
Perform the following operation in the Setup Option screen.
1. Select “Sort TV Channels “ using 8 or 2 and press the k but-
5. Enter the name of the channel to display on the TV screen. Select the
“Channel Name” item using 8 or 2, and press the k button.
Decide on the position to enter the text using 4 or 6, and enter text
using 8 or 2.
ton.
Setup Options
Auto Install
When you have entered the name, press the k button.
6. When you press NEXT f with the “Channel Name” item selected,
the following screen is displayed. Select the item to be changed using
8 or 2, and change the settings.
Manual Search
Sort TV Channels
Manual Channel Search (Page 2)
Date and Time
OK
Decoder
NICAM
Off
Off
Press OK to Select or "Left Arrow" to Exit.
Fine Tuning
2. The following screen will be displayed. In this screen, arrange or
delete channels.
Sort Channel List
Press PREVIOUS for Page 1 of Options.
Press SYSTEM to Save and Exit.
P:04
P:05
P:06 S.P: 001 BBB
Decoder
Sets whether or not to use a decoder to receive
this channel.
When you press the k button, the selection
item is displayed. Select the desired item using
8 or 2, and press the k button.
P:07
P:08
Press OK to Select Channel to Move
Press CLEAR to Delete a Channel
Press SYSTEM to Save and Exit.
NICAM
Sets whether or not to select NICAM.
When you press the k button, the selection
item is displayed. Select the desired item using
8 or 2, and press the k button.
Program#
Reception channel
Channel name
Rearranging the order of channels
First of all, select the channel you want to re-arrange using 8 or 2, and
press the k button.
Next, move to the position where you want to move the channel to using
8 or 2, and press the k button. This re-arranges the order of the
channel.
Fine Tuning
After pressing the k button, fine-tune the
reception state using 4 or 6 while viewing the
TV screen. When you have finished adjusting,
press the k button.
NOTE:
Deleting TV channels
You can delete channels you do not want to receive. Select the desired
channel using 8 or 2, and press CLEAR.
-
When you press PREV d, the screen returns to “Manual Channel
Search (Page 1)”. In this screen, you can change the details you are
currently setting.
3. Repeat step 2 for all of the channels you want to change.
4. Whenyouhavefinishedchangingthesettings,pressSYSTEMMENU
to save the settings.
7. Press SYSTEM MENU to save the settings, and return to the Setup
Options screen.
8. Repeat steps 1 to 7 of this procedure for all of the channels you want
to set.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
6. Repeatedly press REC MODE to specify the recording mode (picture
Recording Programmes during Reception
quality).
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press o button. (It takes time to enter the condition the power
supplied.)
3. Press rOPEN/CLOSE to open the disc tray, and place the disc with
the label facing up on the disc tray.
HQ High Quality
About 60 minutes can be
recorded to disc (4.7GB).
SP Standard Play
About 120 minutes can be
recorded to disc (4.7GB).
LP Long Play (S-VHS quality) About 180 minutes can be
recorded to disc (4.7GB).
EP Extended Play (better than About 240 minutes can be
VHS quality)
EP+ ExtendedPlay(VHSpicture About 360 minutes can be
quality) recorded to disc (4.7GB).
recorded to disc (4.7GB).
7. Press TV to switch to the DVD recorder tuner.
8. Press CH/INPUT + or - to select the channel to record.
9. Press RECq to start recording.
During recording, the following information is displayed on the front
panel.
Remaining time (hours : minutes : seconds)
3. Press rOPEN/CLOSE.
The disc tray closes, and "READING" is displayed on the front panel
to indicate that the disc is being checked.
If a disc ready for recording has been loaded, the display on the front
panel or on the TV screen changes as follows.
Recording in progress display
Recording mode
“NO DATA” on front This is displayed for a brief flash when
REM
VPS PDC
SP
panel
an empty new disc is loaded.
REC
DVD RW
Index screen is displayed You have loaded an already recorded
on TV and final line be- DVD+RW disc, or an already re-
comes “Empty Title”
corded DVD+R disc that has not been
finalised.
Type of disc
Stereo audio
Chapter No.
Title No.
NOTE:
Cancelling (pausing)/resuming recording
When you press PAUSE s during recording, recording is paused, and
"Pause Rec" is displayed on screen.
-
When the menu contained on the disc is displayed or playback starts,
this means that the disc is not recordable. Reload with a recordable
disc.
Use this feature, for example, to prevent commercials from being
recorded.
To resume recording, press RECq.
-
When "No More Titles Available" is displayed, this means that titles
(including empty titles) exceeding 48 have been saved to disc. Either
delete titles, or replace the disc.
Marking screens during recording
5. When the disc menu is displayed, move to “Empty Title” by 8 or 2,
During recording it is possible to mark scenes that you want to see or
hide later. During recording press EDIT at the relevant location. The
screen displays “Inserting Chapter Marker”. The “CHAPTER” number is
increased by one in the Status Display. Press DISPLAY to display the
Status Display on the screen.
and make sure that there is enough free space on the disc.
AV1
01.01.05 0:00:25 SP
Empty Title
Ending recording
Press e to end recording.
Freespaceondisc
(time)
1:53:03 SP
When a recording is made to disc, the following additional information is
also stored at the beginning of the recording:
• Name of the recording. If the TV station does not transmit a name, only
the channel number and time will be stored as the name
• Length of the recording
NOTE:
-
When a blank disc is inserted, the Disc Menu is not displayed on the
TV screen. The TV screen returns to the screen of the broadcasting
station that was being received or the currently selected external
input.
• Record type (Quality)
• Date of the recording
Proceed to the next step 6 as it is.
• Index picture of the recording
-
With DVD+RW discs, you can also overwrite titles that have already
beenrecordedtodisc.Fordetailsonoverwriterecording,see“Inserting
New Recording on a DVD+RW” on page 22.
When recording is ended, this information is displayed in the index
screen.
Name of the recording
Length of the recording
AV1
01.01.05 0:00:25 SP
Record type (Quality)
Date of the recording
17
Download from Www.Somanuals.com. All Manuals Search And Download.
To One Touch Recording (OTR)
Timer Recording
The power can be automatically turned off after recording for the specified
timewithoutsettingtimerrecording.DVDrecorderwillautomaticallyswitch
off after ending recording.
When you press RECq during recording, you can increase the recording
time 30 minutes at a time. The DVD recorder will automatically switch
off after recording ends.
This feature allows you to automatically record at a specified date and
time. Up to eight reservations can be made on the DVD recorder.
There are two timer recording modes, timer recording by “Video Plus+
code” and timer recording by entering a programme No. and recording
date and time.
VIDEO Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation. The VIDEO Plus+ system is manufactured
under license from Gemstar Development Corporation.
NOTE:
-
OTR does not work when there is not 30 minute’s worth of recordable
space.
NOTE:
-
To cancel the recording time that you have set repeatedly press
RECq until the time at the bottommost line of the Status Display is
no longer displayed.
-
Set the DVD recorder's clock in advance.
-
-
When the disc runs out of free space during recording, the setting
for automatically turning the switch off after recording ends becomes
invalid, and the power cannot be turned off.
To cancel the recording time that you have set
Press CLEAR while the recording time is displayed.
Timer recording by “Video Plus+ code”
Most TV programmes can be recorded easily in the recording screen by
thenine-digitVideoPluscodeassignedtothatprogram.Astheinformation
to be set for timer recording is contained in the Video Plus+ code, there is
no need to enter a date, programme No., and start and end times.
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV's manual.)
To watch the TV during recording
To watch TV on the TV tuner while the programme is being recorded,
press the TV/DVD button to switch to the TV tuner so that you can watch
the TV programme.
2. Press TIMER to display the TIMER screen.
3. Select “Video Plus+” using 8 or 2, and press the k button.
Timer
NOTE:
-
The TV switch can be turned off if you are not going to watch TV
during recording.
Video Plus+
Timer Setup
Timer List
To Exit Press TIMER
4. Input the recording timer information.
Video Plus+
Enter Code
Record Mode
Repeat
SP
None
VPS/PDC
Confirm Programming
To Exit Press TIMER
Code
Enter the Plus Code with 8 or 2 or with the number
buttons 0 to 9. This number can be found next to the
start time of the TV programme in your TV listings
magazine. e.g.: 5-312-4 or 5 312 4.
Record mode Selecttherecordingmode(picturequality). Whenyou
press the k button, the menu is displayed. Select
the desired recording mode using 8 or 2.
Repeat
Whenyoupressthekbutton,themenuisdisplayed.
Choose “None” using 8 or 2.
"Mo-Fr":
Repeated daily recordings from Monday
to Friday.
"Weekly": Repeatedweeklyrecordings(everyweek
on the same day).
NOTE:
-
When the timer preset with Video+ code, “Mo-
Fr” and “Weekly” timer programme can not be
selected.
VPS/PDC
Select this setting when using VPS/PDC. Each press
of the k button selects or deselects this setting.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE:
8. Press TIMER to return to the “Timer” screen, and press TIMER
again to end timer recording. The timer programme recording time
is displayed on the Channel/Clock Display.
-
What is “VPS/PDC?”
“VPS”(VideoProgrammingSystem)and“PDC”(ProgrammeDelivery
Control) are mechanisms for controlling start of recording and the
continuation time according to signals that arrive from the TV sta-
tion. These control mechanisms allows reserved programmes to be
recorded on time even if programmes start earlier or later than the
reserved scheduled times.
The times listed in TV guides are either VPS or PDC times.
To start recording at times different from “VPS/PDC”, turn “VPS/PDC”
off.
AV1
10:48
21:00
-
VPS/PDC features are enabled for individual programmes to be
recorded. To continuously record two or more programmes by “VPS/
PDC” on a certain channel, reserve each recording individually.
9. Load a DVD+R/RW (unprotected) ready for recording.
NOTE:
-
Load a disc with enough free space for recording the programme.
5. Move to the “Confirm Programming” item using 8 or 2, and press
10. Press o to turn the DVD recorder off.
the k button.
Recordingisautomaticallystartedwhenthetimerreachestherecording
time.
Video Plus+
Enter Code
NOTE:
1
2
3
4
5
6
7
8
9
-
lights on the front panel to indicate that the DVD recorder is set
for timer recording.
Record Mode
Repeat
SP
None
VPS/PDC
Confirm Programming
To Exit Press TIMER
-
When there is not enough free space for recording the entire pro-
gramme on the disc, the programme will be recorded to free space,
and recording will end halfway through the programme.
6. The“TimerSetup”screenisdisplayed.Movetothe“Confirmprogram-
ming” item using 4 or 6, and press the k button.
Timer Setup
Program
14
04
Date
50
End
Start
Time 08
41
09
36
:
:
Record Mode
Repeat
SP
None
VPS/PDC
Confirm Programming
To Exit Press TIMER
7. The “Timer List” screen is displayed. Check the reserved details.
Timer List
Date Ch. Start / End Mode VPS/PDC
07/04 AV2 21:00/23:00 SP
Total Recording Time: 02:00
Press OK to Edit Entry,CLEAR to Delete
To Exit Press TIMER
Insert Recordable Disc and Press
/ON to Start Recording
NOTE:
-
To change the reserved details, select the line to change using 8
or 2, and press the k button. (When making the 5th reservation
onwards, the second page of the reserved details list is displayed
by repeatedly pressing 2.) The display returns to the "Timer Setup"
screen. Here, set the reserved details again.
-
-
Select a line that has not been entered, and press the k button.
Thedisplayreturnstothe"TimerSetup"screen.Here,youcanreserve
a different programme.
Reservations can also be deleted. For details on operation methods,
see page 21.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Move to the "Confirm Programming" item using 8 or 2, and press
the k button.
Timer recording without using “Video Plus+ code”
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
The "Timer List" screen is displayed. Check the reserved details.
Timer List
2. Press TIMER to display the TIMER screen.
Date Ch. Start / End Mode VPS/PDC
NOTE:
20/04 AV2 21:00/23:00 SP
-
When the clock has not been set, the "Set Date and Time" screen will
be displayed. Move the entry item using 8 or 2, set the clock using
8 or 2, or the 0 to 9 number buttons, and press SYSTEM MENU.
(For details on operation methods, see page 15.)
Sat
02 21:00/22:45
LP
LP
Mo-Fr AV-3-S 06:00/06:30
Total Recording Time: 04:15
3. Select “Timer Setup” using 8 or 2, and press the k button.
Press OK to Edit Entry,CLEAR to Delete
To Exit Press TIMER
Timer
NOTE:
Video Plus+
Timer Setup
Timer List
-
To change the reserved details, select the line to change using 8
or 2, and press the k button.(When making the 5th reservation
onwards, the second page of the reserved details list is displayed
by repeatedly pressing 2.) The display returns to the "Timer setup"
screen. Here, set the reserved details again.
-
-
Select a line that has not been entered, and press the k button.
Thedisplayreturnstothe"Timersetup"screen.Here,youcanreserve
a different programme.
Reservations can also be deleted. For details on operation methods,
see page 21.)
To Exit Press TIMER
4. Move to the item to enter using 4 or 6, and enter the information
for recording.
Timer Setup
6. Press TIMER to return to the “Timer” screen, and press TIMER again
BBC1
Start
Program
20
04
Date
to end timer recording.
End
NOTE:
Time 21
00
22
00
:
:
-
lights on the front panel to indicate that the DVD recorder is set
for timer recording.
Record Mode
Repeat
SP
None
7. Load a DVD+R/RW (unprotected) ready for recording.
VPS/PDC
Confirm Programming
NOTE:
-
Load a disc with enough free space for recording the programme.
To Exit Press TIMER
8. Press o to turn the DVD recorder off.
Program
Date
Select the channel or input using 8 or 2.
Recordingisautomaticallystartedwhenthetimerreachestherecording
time.
Enter information with 8 or 2 or with the number buttons
NOTE:
0 to 9.
-
When there is not enough free space for recording the entire pro-
gramme on the disc, the programme will be recorded to free space,
and recording will end halfway through the programme.
Start
Time
Enter information with 8 or 2 or with the number buttons
0 to 9.
End Time
Enter information with 8 or 2 or with the number buttons
0 to 9.
Record
Mode
Select the Record Mode. For details on the type of Record
Mode, see page 17.
Repeat
Selecteitherofthefollowingtorepeatedlyrecordthesame
programme. When you press the k button, the menu is
displayed. Select the desired setting using 8 or 2.
“Mo-Fr”:
Repeated daily recordings from Monday to
Friday.
“Weekly”: Repeated weekly recordings (every week on
the same day).
VPS/PDC Select this setting when using VPS/PDC. Each press of
k selects or deselects this setting.
NOTE:
-
For details on the “VPS” (Video Programming System) and “PDC”
(Programme Delivery Control),” see page 19.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking, Changing and Deleting Reservations
Problem solving for programmed recordings
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
Thefollowingproblems/errormessagesappearsonthescreenwhileoperat-
ing the DVD recorder. Possible solutions are provided in this section:
2. Press TIMER to display the TIMER screen.
3. Select “Timer List” using 8 or 2, and press the k button.
Error Message
Solution
Insert Record- Awrite-protected disc has been inserted. Cancel the
able Disc and protection (See “To cancel disc protection” page 30)
Press o to or insert a different disc.
Timer
Start Recording
Video Plus+
Timer Setup
Timer List
Invalid Setup, The data for the recording could not be transferred.
please correct
Please check the date, start time and end time of
the programmed recording.
Timer Overlaps The information for two programmed recordings
Existing Timer
overlap.
If you ignore this error message the TV programme
with the earlier start time will be recorded first. You
will miss the start of the second programme.
Change the information for one of the recordings or
delete one of the recordings.
To Exit Press TIMER
4. The “Timer List” screen is displayed. Check the reservation details.
If necessary, change, delete, or make new reservations.
Timer List
Date Ch. Start / End Mode VPS/PDC
Warning
Solution
20/04 AV2 21:00/23:00
Sat 02 12:51/13:55
Mo-Fr AV-3-S 06:00/06:30
SP
LP
LP
TimerRecording! The DVD recorder was switched on several minutes
Press o to before the start of a programmed recording. Switch
Start Recording. off the DVD recorder with o. A programmed
recording(timer)willonlyfunctioniftheDVDrecorder
Total Recording Time: 04:15
is switched off (button o).
Press OK to Edit Entry,CLEAR to Delete
To Exit Press TIMER
To change a reservation
Select the line to change using 8 or 2, and press the k button. The
"Timer Setup" screen is displayed. Set the reservation details again. (For
details on operation methods, see page 20.)
To delete a reservation
Select the line to delete using 8 or 2, and press the CLEAR button.
The "Timer Delete" screen is displayed. Select "OK to Delete Timer" and
press the k button.
Timer Delete
OK to Delete Timer
Cancel
To make a new reservation
Select a free line, and press the k button. The display returns to
the "Timer Setup" screen. In this screen, you can reserve a different
programme.
1. Press TIMER to return to the “Timer” screen, and press TIMER again.
This ends checking of reservations.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Video from Other AV Equipment
VideooutputfromvideocamerasandotherAVequipmentcanberecorded
on the DVD recorder.
SAT Record (Automatic recording from
Satellite Receiver)
Inthecaseofequipment(e.g.satellitereceiver)connectedtotheAV2Scart
terminal on the rear panel on which timer recording is possible, video can
be recorded synchronized with the start of the broadcast without having
to reserve recording on the DVD recorder.
NOTE:
-
Prepare other AV equipment in advance, and prepare the equipment
for playback. ("Connecting to a video deck and other recording equip-
ment" page 12)
NOTE:
-
-
-
Only Audio input cannot be recorded without entering a Video
signal.
Almost all videos and DVD software on sale have copy-protection.
You cannot record them using this unit.
-
To use this feature, the "SAT Record" setting item for recording in
System Menu must be set in advance.
Press SYSTEM MENU to display the System Menu. Make sure that
the "Recording" item is set to "AV2" using 8 or 2.
-
Video games cannot be recorded.
Video
Recording Options
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press rOPEN/CLOSE to open the disc tray, and place the disc with
the label facing up on the disc tray. Press rOPEN/CLOSE to close
the disc tray.
3. When the disc menu is displayed for DVD+RW discs, either move to
"Empty Title" using 8 or 2, or specify a position when overwriting
an already recorded program.
Sound
Record Mode
Filter Mode
SP
Standard
Off
Feature
Auto chaptars
SAT Record
Dual Language
Language
AV2
OK
Recording
Language 1
Setup
NOTE:
-
Fordetailsonhowtospecifytheoverwriterecordingposition,"Inserting
New Recording on a DVD+RW" (See page 22).
If this item is not set, see “Recording Settings” on page 34.
Reserve recording on the AV equipment connected to the AV2 Scart
terminal, and set the satellite tuner ready for recording.
4. Press REC MODE to specify the recording mode (picture quality).
5. Press CH/INPUT + or - to select the input from the AV equipment
to record.
Current channel / selected input
AV2
08:13
21:00
6. Start playback on the other equipment.
7. Press the TV buttons to display the video from the other equipment
on the TV screen.
8. Press RECq to start recording.
Inserting New Recordings on a DVD+RW
WithDVD+RWdiscs, youcanspecifyavideotitlealreadyrecordedtodisc
and overwrite that title. Note, however, that if you overwrite with content
thatislongerthanthepreviouslyrecordedcontent, otherfollowingcontent
will also be overwritten.
1. Select the title on the disc menu.
2. Press the k button to play the title.
3. Find where you want to insert the new recording.
4. Press e at the position where the new recording to go.
5. Press REC MODE to select the record mode. Start recording as usual
by pressing RECq on the remote control.
6. The "Title Overwrite" screen is displayed. Select "OK to Overwrite
Title" and press the k button.
Title Overwrite
OK to Overwrite Title
Cancel
The new recording will be inserted.
7. Stop recording with e.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC PLAYBACK
Playing back in slow motion
When you press F.SLOW x, the disc is slow-forwarded. Each press of
F.SLOW x changes the slow-forward speed.
When you press R.SLOW z, the disc is slow-reversed. Each press of
R.SLOW z changes the slow-reverse speed.
To return to normal playback, press w.
Basic Operations
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press o button. (It takes time to enter the condition the power
supplied.)
3. Press rOPEN/CLOSE to open the disc tray.
4. Place the disc with the label facing up on the disc tray.
Viewing from a desired camera angle
Some DVD-Video discs may contain scenes which have been shot
simultaneously from a number of different camera angles.
The jacket or case of discs that are recorded with angles will be
marked.
5. Press rOPEN/CLOSE or w.
Example:
Thedisctraycloses.Thediscisthenread,andplaybackautomatically
starts.
In the case of discs that allow the camera angle to be selected, the angle
selection menu will be displayed for several seconds at the beginning.
The camera angle can be changed by pressing 8 or 2 while this menu
is displayed.
• While the disc is being read, “READING” is displayed on the front
panel.
• During playback, the elapsed time is displayed on the front
panel.
Angle
1/3
When playback does not automatically start
Press w to start playback.
When the menu is displayed
Select the desired programme to play back by 4, 6, 8, 2, and press
the k button.
Afterthismenudisappears, ifyouwanttochangethecameraangleagain,
see “Various Playback Operations Using T/C Tools” on page 24.
Repeat Playback
EachpressofthePLAYMODEbuttonduringplaybackdisplaystheplayback
modes. Press the k button to select the desired playback mode.
Stopping playback
Press e to stop playback.
When you press w, the disc is played from the position when playback
was stopped.
Playback Mode
Explanation
Repeat Chapter Repeats the chapter currently being played.
NOTE:
-
When the e button is pressed and held down, “Progressive” as the
TV screen setting will be changed to “Interlace” without System Menu
operation. See “TV Screen Settings” on page 31.
Repeat Title
Repeat A-B
Repeats all chapters.
Repeats only a specified section.
Temporarily stopping playback (pause)
Press PAUSE s to pause playback.
To resume playback, press w.
Skipping chapters/returning to the start of chapters
With DVD titles, the content of a single title is divided into several blocks
called “chapters.”
When you press NEXT f during playback or a pause, playback of the
next chapter is started.
To select a specified section, press the k button
at the repeat start point (A). The display changes
to Repeat B. Press the k button again at the
repeat end point (B).
When you press PREV d during playback or a pause, the disc returns
to the start of the present chapter, and playback is started.
(None)
Select this to cancel the PLAY MODE setting. (The
setting is cancelled even if you do not press the
k button.)
Picture zoom
Press ZOOM during normal/slow playback or still picture. The central
part of the picture is magnified, and “ZOOM X 1” appears on the TV
screen. Each time you press ZOOM, the zoom mode will be changed
as follows:
ZOOM X 1 J ZOOM X 1.3 J ZOOM X 2 J ZOOM X 4 J ZOOM OFF
Press 4, 6, 8 or 2 to change the zoom point.
Fast-forward/fast-reverse
When you press F.FWD v, the disc is fast-forwarded. Each press of
F.FWD v changes the fast-forward speed.
WhenyoupressF.REVc, thediscisfast-reversed. EachpressofF.REV
c changes the fast-reverse speed.
To return to normal playback, repeatedly press ZOOM until the zoom ratio
display at the bottom of the screen disappears.
To return to normal playback, press w.
NOTE:
-
Picture zoom may not work on some discs.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Various Playback Operations Using T/C Tools
When you press T/C during playback or while playback is paused, the
“T/C Tools” menu is displayed.
Select the menu item using 8 or 2 and set the desired feature according
to the description in the following table.
LISTENING TO MUSIC
Playable Discs
Audio discs can be played on the DVD recorder:
Basic Playback Operations
T/C Tools
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press rOPEN/CLOSE to open the disc tray.
3. Place the disc with the label facing up on the disc tray.
4. Press rOPEN/CLOSE or w.
Title
03
02
Chapter
Zoom
Angle
Slow
OK
Thedisctraycloses.Thediscisthenread,andplaybackautomatically
begins.
• While the disc is being read, "READING" is displayed on the front
panel.
Step
• During playback, the elapsed time is displayed on the front
panel.
Search
Audio
Subtitles
Sound
OK
1en
1en
Stopping playback
Stereo
Press e to stop playback.
When you press w, the disc is played from the beginning.
NOTE:
Menu Item
Title
Explanation of Operation
-
The resume playback feature is disabled in the case of audio discs.
To play back a title, press the number buttons or 4 6
Pausing/cancelling a pause
Press PAUSE s to pause playback.
To resume playback, press w.
to specify the number of the desired title to playback.
Chapter
To play back a chapter, press the number buttons or
4 6 to specify the number of the desired chapter to
playback.
Skipping a track/returning to the beginning of a track
When you press NEXT f during playback, the next track is started.
When you press PREV d during playback, the disc returns to the start
of the present track, and playback is started.
This feature also allows you to play back chapters that
are set to "hide" by the disc management features.
The "hide" setting can be changed to "display" during
playback. (See page 28.)
Zoom
Zooms in on images. Each press of k switches the
zoom ratio.
Fast-forwarding/fast-reversing
When you press F.FWD v, the disc is fast-forwarded. Each press of of
F.FWD v changes the fast-forward speed.
When you press F.REV c, the disc is fast-reversed. Each press of
F.REV c changes the fast-reverse speed.
Angle
Slow
Press 4 6 to switch the camera angle.
Each press of 4 6 switches the slow motion playback
speed.
Step
Displays video one frame at a time. 4 displays the
previous frame, and 6 displays the next frame.
Search
Specifiesthetime(hours:minutes:seconds)andplays
back from that time.
When you press the k button, the frame for enter-
ing the time is displayed. Move to the desired digit by
4 6, and press the number button to specify the
time. Press the k button. Playback starts from the
specified time.
Audio
Press 4 6 to switch the DVD audio language.
Switching the audio language is enabled while the disc
is being played. (Specify the audio language to use at
all times at "System Menu".)
Subtitles
Press 4 6 or number buttons to switch the DVD
subtitle language.
Switching the subtitle language is enabled while the
disc is being played. (Specify the subtitle language to
use at all times at "System Menu".)
Sound
Press 4 6 to switch audio output from the analogue
audio output terminal to Stereo or Surround. When set
to Surround, the sound effect of a multi-channel audio
can be simulated.
Switching the sound is enabled while the disc is being
played. (Specify the subtitle language to use at all times
at "System Menu".)
NOTE:
-
-
Some features are not available depending on the type of disc.
The menu items of unavailable features are displayed on a grey
background, and cannot be moved between using 8 or 2.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Playback, Random Playback, Intro Playback
Each press of the PLAY MODE button during playback displays the play
Playing Back MP3 Discs
modes. Press the k button to select the desired play mode.
Play back
1. Insert a MP3 disc.
2. “Track, Album and Artist” will be displayed on the screen.
3. MP3 CD will be played automatically.
Playback Mode
Repeat Track
Repeat Disc
Repeat A-B
Explanation of Operation
Repeats the track currently being played.
Repeats all tracks.
NOTE:
Repeats only a specified section. To select a
specified section, press the k button at the
repeat start point (A). The display changes to
Repeat B. Press the k button again at the
repeat end point (B).
-
When the information for track, album and artist are not recorded,
they will not be displayed.
Playing Back a Specific Album or Track
YoucanspecifyanallbumorTracktoplaybackbyperformingthefollowing
operation during playback or while playback is puased.
1. Press T/C to display the “T/C Tolls” menu.
2. Select “Album” or “Track” using 8 or 2.
3. Press the number buttons or 4 6 to specify the number of the
desired album or track to play back.
Shuffle
Selects and plays tracks on the disc at random.
Scan
Plays back only the first ten seconds of each
track.
(None)
Select this to cancel the PLAY MODE setting.
(The setting is cancelled even if you do not press
the k button.)
Stopping playback
Press e to stop playback.
Playing Back a Specific Track
You can specify a track to play back by performing the following operation
during playback or while playback is paused.
Pausing/cancelling a pause
Press PAUSE s to pause playback.
To resume playback, press w.
1. Press T/C to display the "T/C Tools" menu.
2. Select "Track" using 8 or 2.
3. Press the number buttons or 4 6 to specify the number of the
desired track to play back.
• You can advance to the next track by pressing NEXT f.
• You can return to the pervious track by pressing PREV d.
Skipping a track/returning to the beginning of a track
Press NEXT f during playback or pause to skip to the next track.
Press PREV d during playback or pause to skip back to the previous
track.
You cannot fast-forward or fast-reverse while playing back MP3 discs.
NOTE:
Playing Back from a Specific Point by Time Search
You can specify the time (hours : minutes : seconds) and play back from
that time.
-
-
The file system is ISO9660 Level 1 and Level 2.
If the CD has both audio CD tracks and MP3 files, only audio CD
tracks are played.
The time can be specified only for a track that is currently being played.
Perform the following while the desired track is being played.
1. Press T/C to display the "T/C Tools" menu.
2. Select "Search" using 8 or 2, and press the k button The frame
for entering the time is displayed.
Move to the desired digit by 4 6, and press the number buttons to
specify the time.
3. Press the k button. Playback starts from the specified time.
-
-
It would take 30 seconds or more for this unit to read MP3 files
depending on its structure.
This unit can recognize up to 999 files or folders per disc. A CD with
1000 files or folders and over cannot read by this unit.
MP3 CDs may not be played in the recorded order.
MP3 files must have the extension letters, “.MP3” or “.mp3”.
Standard, sampling frequency, and the bit rate:
MPEG:1 Audio Layer 3
-
-
-
44.1kHz, 48kHz
56kbps to 256kbps (constant bit rate)
Therecommendedrecordingsettingforahigh-qualitysoundis44.1kHz
of sampling frequency and 128kbps of constant bit rate.
Limitations on display
NOTE:
-
When “Playback Mode” is on, “Time Search” is not avairable.
See the table above on “Playback Mode”.
-
-
Available letters for display are the following: numbers 0 through 9,
and capital or lower-case alphabet characters A through Z.
Some MP3 CDs cannot be played back depending on the recording
conditions.
The CD has no music data or non-MP3 files cannot be played
back.
-
-
-
-
The WMA files cannot be played back.
Customers should also note that permission is required in order
to download MP3 files and music from the Internet. SANYO has
no right to grant such permission. Permission should always be
sought from the copyright owner.
-
MP3 discs hold about ten times more tracks than audio CDs. Due to
the large number of tracks, tracks are divided and saved in groups.
These groups are called “folders.” Folders are given names that
indicate their content.
Folder1
Folder2
Track1 Track2 Track3 Track4 Track1 Track2 Track3
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for Photos in the Thumbnail Screen
VIEWING JPEG CD PHOTOS & IMAGES
The following operations are available in the thumbnail screen.
Select the menu item using 8 or 2, and set the desired feature according
to the description in the following table.
Playable Discs
DiscsrecordedwithimagessavedinJPEGformatsuchasKODAKPicture
CDs can be played on the DVD recorder.
NOTE:
Photo
Thumbnails
-
-
The file system is ISO9660 Level 1 and Level 2.
When creating discs on a personal computer, image files may also
be saved without making a folder for the files.
Page
Roll
3
1
-
When images files are saved in two or more folders, each folder is
distinguished as a roll. (The uppermost layer is also regarded as a
roll.)
Play
OK
OK
Reorder
-
-
Even if folders are arranged in a series, they may be hierarchically
organized and other folders may be created within folders.
The DVD recorder can handle up to 99 folders up to 1000 images per
folder. If the limit of 999 images per folder is exceeded, some images
will not be able to be loaded.
Page:
Roll:
Photo:
3/7
1/2
19/55
Images up to 2560 x 1920 pixels in size can be read.
Date:02/27/2005
Displaying the Thumbnail Screen
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press rOPEN/CLOSE to open the disc tray.
3. Place the disc with the label facing up on the disc tray.
4. Press rOPEN/CLOSE or w.
Menu Item
Page
Explanation of Operation
Displays the page number of the thumbnail screen. You
can switch the page by pressing the k button.
Roll
When images are saved in two or more folders, each
folder is regarded as a single roll. A number assigned
automatically by the DVD recorder to the currently
displayed folder is displayed to distinguish each folder.
(This number differs according to folder name.)
The disc tray closes. The disc is then read, and images are displayed
as thumbnails.
• While the disc is being read, "READING" is displayed on the front
panel.
• You can change the order of images in this screen or perform a
slide show.
The roll can be switched by pressing the k button.
Play
When you press the k button, a slide show of the
images in the currently displayed roll is started.
Photo
Thumbnails
Reorder
The display order of images can be changed.
1) Press the k button to start reordering images.
2) Select the image to be reordered by 4, 6, 8, 2,
and press the k button.
3) Specify the move destination position by 4, 6, 8,
2,andpressthekbutton.Theorderoftheimages
is changed.
Page
Roll
3
1
Play
OK
OK
Reorder
NOTE:
Page:
Roll:
Photo:
3/7
1/2
19/55
-
Some features are not available depending on the type of disc. The
menuitemsofunavailablefeaturesaredisplayedonagreybackground,
and cannot be moved between using 8 or 2.
Date:02/27/2005
NOTE:
-
While viewing the Thumbnail Screen, after you have selected an
image and then pressed the e button, the image will be replaced by
“Hidden Image”.
The “Hidden Image” will be skipped during slide show.
To return to the images, select the “Hidden Image” and press the e
button again.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Photos in the Slide Show
Specify the roll in the thumbnail display, and press the k button to
start the slide show.
Enlarging images
When ZOOM is pressed during the slide show or while the slide show is
paused, the currently displayed image can be enlarged up to two times
its size.
Each press of ZOOM switches the zoom ratio, and the zoom ratio is
displayed at the bottom of the screen.
Youcanadjustwhichpartofthevideoimagewillbedisplayedinthecentre
of the screen by pressing 4, 6, 8, 2 during zoom playback.
To return to regular playback, repeatedly press ZOOM until the zoom ratio
display at the bottom of the screen disappears.
Pausing the slide show
When you press PAUSE s, the slide show is paused, and the “Photo
Slide Show” menu is displayed.
To continue the slide show from the paused position, press w.
Ending the slide show
Press e to end the slide show and return to the thumbnai l screen.
Changing how slide shows are displayed
When you press PAUSE s, the slide show is paused, and the “Photo
Slide Show” menu is displayed. In this menu, set how the slide show is
to be displayed (e.g. image display time).
NOTE:
-
If you do not perform any operation, the slide show menu disappears.
To redisplay the “Photo Slide Show” menu, press T/C.
Photo
Slide Show
Photo
Play
24
OK
OK
x1
-
Thumbnails
Zoom
Rotate
Timer
3
Repeat
Off
Photo:
24/55
Date:
01/01/2005
Menu Item
Photo
Explanation of Operation
Whenyoupressthenumberbuttonstoenterthenumber
of an image in the roll that is being displayed in the slide
show, that image is displayed.
You can then enlarge or rotate it.
Play
When you press the k button, the slide show is
resumed with the slide show menu displayed.
Thumbnails
Zoom
When you press the k button, the screen returns to
the thumbnails screen.
Whenyoupressthekbutton,thecurrentlydisplayed
image is displayed enlarged. Each press of the k
button changes the zoom ratio between X1, X2, X4,
and X8.
Rotate
Timer
Whenyoupressthekbutton,thecurrentlydisplayed
image is rotated. Each press of the k button rotates
the image 90° clockwise.
Sets the time (number of seconds) that each image
is displayed by pressing the k button, 4 6 or the
number buttons up to 99(max).
Repeat
Specifies whether or not to repeat the slide show after
alloftheimageshavebeendisplayed.Eachpressofthe
k button or 4 6 switches between on and off.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING & DISC MANAGEMENT
Unhide Chapter
Editing Chapters
During regular playback, hidden chapters cannot be viewed as they are
skipped. In the editing mode, hidden chapters are displayed in grey.
You can display hidden chapters by performing the following.
1. Press EDIT the during playback of the corresponding chapter, the
"Edit Chapters" menu will appear on the screen.
A marker will be set every few minutes if the "Auto Chapter" function is
activated in the "Recording" menu. This marker is known as a "chapter".
These markers can be changed when the recording has finished.
It is also possible to add "chapters" later. This means that scenes you do
not want to see during playback, such as commercials, can be hidden or
skipped. During playback you can watch your recording as a continuous
sequence without the hidden chapters.
2. Whenthechaptertobedisplayedisbeingplayedback,select“Unhide
Chapter” using 8 or 2 and press the k button.
NOTE:
Edit Chapters
Markers can be set on DVD+R discs if they have not been finalised.
Insert Chapter
Unhide Chapter
Delete Chapter
Delete All
Insert Chapter
During playback, you can set and delete chapter markers within a title.
Each disc can have a maximum of 100 chapters, and 99 per title. When
one of these values is reached, “Max Chapter Limit Reached” appears
on the screen. Some markers will need to be deleted in order to create
new ones or to make recordings.
Hidden Chapter
1. During playback, press EDIT at the appropriate point. The "Edit
Chapters" menu will appear on the screen.
2. When the image to use as the start position of a new chapter is
displayed, select “Insert Chapter” using 8 or 2 and press the k
button.
The hidden chapter can be played back normally.
NOTE:
-
To view the entire titles includng the hidden chapters, see “Playback
Title” on page 29.
Edit Chapters
-
You can move to chapters to return to display using PREV d or
NEXT f.
Insert Chapter
Hide Chapter
Delete Chapter
Delete All
3. To end, press EDIT.
Delete Chapters(Delete Chapter, Delete All)
Within a title, you can either delete individual chapter markers or all
markers.
1. Press EDIT during playback of the corresponding chapter. The "Edit
Chapters" menu will appear on the screen.
2. Select either "Delete Chapter " for current chapter or "Delete All " for
all chapters of the selected title using 8 or 2 and press the k
button.
3. Confirm the deletion of all the chapters by pressing "Press OK to
Delete All Chapters". If you do not want to, press "Press STOP to
Cancel" button.
“Inserting Chapter Marker” appears on the TV screen. You can see that
the total number of chapters shown on the Status Display is incremented
by one.
NOTE:
-
This operation is possible even in a paused state.
Edit Chapters
Insert Chapter
3. To remove the menu, press EDIT.
NOTE:
Hide Chapter
Deleting All Chapter Markers
-
Ifthedisciswrite-protectedorthediscisafinalisedDVD+R,subsequent
changes cannot be made.
Delete Chapter
Press OK to Delete All Chapters
Delete All
Press STOP to Cancel
Hide Chapter
By default, all the chapters are visible. You can hide chapters for playback
(e.g. commercial skipping).
1. Press EDIT during playback of the corresponding chapter. The "Edit
Chapters" menu will appear on the screen.
2. When the chapter to return to display is being played back, select
“Hide Chapter” using 8 or 2 and press the k button. The picture
is greyed out.
NOTE:
-
When “Delete Chapter” is selected, “Deleting Chapter Marker” will be
displayed while deleting the chapter.
3. To end, press EDIT.
NOTE:
-
During playback this chapter will be skipped.
4. To remove the menu, press EDIT.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Titles
Disc settings
Editing Recording Titles (name)
Changing the Disc Name
Some TV stations transmit the title (name) of a programme. In this case,
the name will be included automatically (e.g. “ROCKY”). Otherwise, the
channel number and time of the recording are stored as the name. The
name of the recording can be changed only after the recording has been
completed.
1. Press the e button or during playback press DISC MENU.
2. The disc menu is displayed. Repeatedly press 8 to display the disc
information.
Repeatedly press 8 until the disc appears here.
UNLOCKED
1. Press the e button or during playback press DISC MENU.
2. Using 8 or 2, select the title whose name is to be edited and press
6. The menu for editing names "Title Settings" appears.
PAL
3. Select "Name" using 8 or 2 and press the k button.
0:04:32 Used
24.03.05
Title Settings
DVD Playback
Disc
Name
AV1
Editing
Play Full Title
Press OK
Erase Title
Press OK
3. In the Disc Info screen press 6. The "Disc Settings" menu appears
on the TV screen.
Press OK to Select or 'Left Arrow' to Exit
Disc Settings
Name
4. Using 4 or 6, select the position where the letter/number/icon is to
be changed/re-entered.
Protected
5. Change the character using 8 or 2. You can switch between upper
and lowercase using SELECT. You can delete the character using
CLEAR.
6. Repeat 4 and 5 until you have made the changes you want.
7. Save the new name with k.
Erase Disc
Finalise Disc
Make DVD Compatible
Press OK to Select or 'Left Arrow' to Exit
8. To end, press 4. "Please Wait" appears on the TV screen for
confirmation.
4. Select “Name" using 8 or 2 and press the k button.
5. Using 4 or 6, select the position where the letter/number/icon is to
be changed/re-entered.
6. Change the name using 8 or 2. You can switch between upper
and lowercase using SELECT. You can delete the character using
CLEAR.
7. Repeat 5 and 6 until you have made the changes you want.
8. Save the new title with k.
9. To end, press 4. "Please Wait" appears on the TV screen for
confirmation.
Playback Title
If you have hidden certain chapters of a title, with this setting you can view
the entire title including the hidden chapters. Proceed as follows:
1. Press the e button or during playback press DISC MENU.
2. Using 8 or 2, select the title that you want to play back and press
6. The menu for editing titles "Title Settings" appears.
3. Select "Play Full Title" using 8 or 2 and press the k button.
4. Playback begins automatically. The full title - including the hidden
chapters - is played back.
Erasing DVD+RW Discs
Erasing a recording/title
1. Press the e button or during playback press DISC MENU.
2. The disc menu is displayed. Repeatedly press 8 to display the disc
information.
3. In the Disc Info screen press 6. The "Disc Settings" menu will appear
on the screen.
You can erase individual recordings from a disc. Follow the instructions
below:
1. Press the e button or during playback press DISC MENU.
2. Using 8 or 2, select the title to be erased and press 6. The menu
for editing titles "Title Settings" appears.
4. Select "Erase Disc" using 8 or 2. Confirm with k. The screen
will show "OK to Erase Disc".
3. Using 8 or 2, select "Erase Title" and press the k button. " OK
to Erase Title" appears on the screen.
5. If you want to erase all titles, press k.
6. The screen will show “Please Wait".
4. If you want to erase the title press k.
5. The screen will show "Please Wait".
Once the disc has been successfully erased, the disc menu shows
“Empty Title” is displayed.
6. "Empty title" will now appear in this position in the disc menu. A new
recording can now be made at this position. If the deleted title was
very short (shorter than several minutes), no “Empty Title” will be
displayed.
NOTE:
-
With this procedure, all titles will be erased.
Can titles be deleted from a DVD+R disc?
Titles on DVD+R discs are only marked as deleted. “Deleted Title” will
appearinthedisplayinsteadof“Emptytitle”. Duringplaybackthe“Deleted
Title” is skipped. The space used for this title cannot be used again as the
title has not been physically deleted. Once the disc has been finalised no
further changes can be made.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Finalising DVD+R Discs
This feature is required to play back a DVD+R disc in a DVD player.
Once the disc has been finalised no further recordings or changes can
be made.
1. Press the e button or during playback press DISC MENU.
2. The disc menu is displayed. Repeatedly press 8 to display the disc
information.
3. In the Disc Info screen press 6. The “Disc Settings” menu appears
on the TV screen.
“Finalise Disc” can not be selected when either there is no DVD+R
disc inserted or the disc is already finalised.
4. Select “Finalise Disc” using 8 or 2 and press the k button.
5. Select “OK to Finalise Disc” using 8 or 2 and press the k
button.
6. The screen will show “Please Wait”.
7. When the operation is executed, “Please Wait” will disappear.
NOTE:
-
If the disc has been recorded on another DVD recorder, the menu
may not appear.
Make DVD Compatible
Even if one or more titles have been edited, a DVD player may still show
the original title. You can prepare your disc so that a DVD player will be
able to read the edited title.
1. Press the e button or during playback press DISC MENU.
2. The disc menu is displayed. Repeatedly press 8 to display the disc
information.
3. In the Disc Info screen press 6. The "Disc Settings" menu will appear
on the screen.
4. Select “Make DVD Compatible" using 8 or 2 and press the k
button.
5. Select “Make DVD Compatible” using 8 or 2 and press the k
button.
6. The screen will show “Please Wait”.
7. When the operation is executed, “Please Wait” will disappear.
Protecting Discs and Cancelling Disc Protection
To prevent an important recording from being accidentally erased, you
can protect the entire disc. You can only protect the disc as a whole. It is
not possible to protect an individual recording.
NOTE:
-
What happens with DVD+R discs?
As long as these discs are not finalised, they can be protected against
accidental erasure in the same way as DVD+RW discs.
Protecting discs
1. Press the e button or during playback press DISC MENU.
2. The disc menu is displayed. Repeatedly press 8 to display the disc
information.
3. In the Disc Info screen press 6. The "Disc Settings" menu will appear
on the screen.
4. Select "Protected" using 8 or 2 and press the k button. The box
is now checked.
5. Exit using 4 and press DISC MENU.
The entire disc is now protected. If you try to record onto this disc
the message “PROTECTED” will appear in the display and “Disc is
Locked” on the screen.
To cancel disc protection
Press the k button at step 4 in "Protecting discs", and deselect the
"Protected" item.
NOTE:
-
Each press of k at step 4 in "Protecting discs" selects or deselects
the item.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD RECORDER SETTINGS
When you press SYSTEM MENU, the following menu will be displayed.
In this menu, you can change various settings on the DVD recorder to
suit your particular requirements.
Setting Item
TV Shape
Explanation
Set the aspect ratio (shape) of yourTV’s screen. When
you press the k button, the selection items are
displayed. Select the desired item using 8 or 2, and
press the k button.
System Menu
See Page 14.
Settings for the TV screen
Black Level
Video Shift
To use this fuature, press the k button to select it.
Each press of the k button selects or deselects
this setting.
Video
Settings for audio
Sound
Fine-adjust the position of the video on the TV screen
to the left and right.
Press the k button, and then adjust the position
using 4 or 6 and press the k button.
Settings for features and operation
Feature
Language
Recording
Setup
Settingsforaudiolanguage,subtitle
language, and menu language
YUV Output Set your TV’s display mode as “Interlace” or “Progres-
sive.” (When the DVD recorder is shipped from the
factory, the display mode is set to “Interlace.”)
Settings for recording
(e.g. picture quality)
When you press the k button, the selection items
aredisplayed.SelectthedisplaymodeofyourTVusing
8 or 2, and press the k button.
Channel settings and other settings.
The above menu will be displayed by pressing SYSTEM MENU not only
while disc operations are stopped, but also during playback, pause and
standby.
After you change a setting, the new details are stored to memory as
default settings for when you perform various operations.
For example, with the recording mode (picture quality), recordings will be
made in the mode set in this System Menu unless you specify a different
mode during recording. If you press REC MODE before recording to
change the recording mode, the setting you make will be enabled only
until the DVD recorder is turned off.
Video
Output
Set whether or not to output video to the S-Video
terminal. When the DVD recorder is connected to a
TV by the SCART cable or other cable, select “S-
Video+YUV.”
When you press the k button, the selection items
are displayed. Select video output using 8 or 2, and
press the k button.
NOTE:
-
When you press 4, other items in the System Menu can be se-
lected.
Set other items as necessary.
NOTE:
-
-
During playback or while disc operations are paused, some items
cannot be changed depending on the title that is currently being
played.
During playback or while disc operations are paused, the "Setup"
feature cannot be changed.
5. To end setting, press SYSTEM MENU.
TV Screen Settings
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press SYSTEM MENU to display the System Menu.
3. Select “Video” using 8 or 2, and press 6 once. The setting items
at "Video Options" on the right of the screen can now be selected
using 8 or 2.
4. Select the item to be changed using 8 or 2, and change the set-
tings.
System Menu
Video
Video Options
Sound
TV Shape
4:3 LB
Black Level
Video Shift
YUV Output
Video Output
Feature
Language
Recording
Setup
Interlace
Video+RGB
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Output Settings
Operation and State Display Settings
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press SYSTEM MENU to display the System Menu.
3. Select “Sound” using 8 or 2, and press 6 once. The setting items
at "Sound Options" on the right of the screen can now be selected
using 8 or 2.
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press SYSTEM MENU to display the System Menu.
3. Select “Feature” using 8 or 2, and press 6 once. The setting items
at "Feature Options" on the right of the screen can now be selected
using 8 or 2.
4. Select the item to be changed using 8 or 2, and change the set-
tings.
4. Select the item to be changed using 8 or 2, and change the set-
tings.
System Menu
System Menu
Video
Video
Feature Options
Sound Options
Sound
Sound
Access Control
Status Display
Resume
Press OK
Digital Output
Analog Output
All
Stereo
Feature
Language
Recording
Setup
Feature
Language
Recording
Setup
Night Mode
Auto Standby
Clock Display: Off
PBC Enable
Setting Item
Explanation
Setting Item
Explanation
Parental Level Control
Accessing of DVD discs can be controlled.
For details, see “Parental Level Control” on page 34.
Digital
Output
Set output from the digital audio output terminal.
When you press the k button, the selection items
are displayed. Select digital output using 8 or 2, and
press the k button.
Access
Control
Status
Display
Along with the on-screen menu, the OSD (On Screen
Display)alsodisplaysinformationonthecurrentoperat-
ing status (counter, playback, recording, TV channel,
etc.) on the TV screen. By default, this would be off, to
see the information about the operating status, check
the“StatusDisplay”box.Thisappearsineveryselected
mode for a few seconds and disappears.
Off
Select this when digital audio output is not
used.
PCM Only Dolby Digital and MPEG-2 multi-channel
signalsareconvertedtoPCM(PulseCode
Modulation). This setting is for receiv-
ers/amplifierswithoutdigitalmulti-channel
sounddecoders.DTSisnotconvertedinto
PCM. (Sound does not output.)
To use this feature, press the k button to select it.
Each press of k selects or deselects this setting.
All
Dolby Digital and DTS signals are fed
unaltered to the digital output. MPEG-2
multi-channel signals are converted to
PCM (Pulse Code Modulation). This set-
ting is for receivers/amplifiers with digital
multi-channel sound decoders.
Resume
If playback of a pre-recorded DVD video disc is inter-
rupted (rOPEN/CLOSE), when the disc is reloaded
(disc is started), playback starts at the precise location
where it stopped. This applies not only to the current
disc but to the last 20 discs played. This feature can
be switched off if not required.
Analog
Output
Set output from the analogue audio output terminal
(L/R AUDIO OUT).
When you press the k button, the selection items
are displayed. Select analogue output using 8 or 2,
and press the k button.
To use this feature, press the k button to select it.
Each press of k selects or deselects this setting.
Auto
Standby
To set whether or not to set the standby mode when
no operations have been performed for 10 minutes.
When no DVD recorder operation has occured for
10 minutes after e(STOP) button is pressed , this
unit will go to standby mode. This function works CD
media(Audio, MP3 or JPEG) only.
Stereo
For devices without DolbySurround or
TruSurround. Use this setting if the DVD
recorder is connected only to a stereo TV
set.
Surround Dolby Digital and MPEG-2 multi-channel
are mixed down to a DOLBY surround-
compatible two-channel output signal. For
devices with Dolby Surround Pro Logic
decoder.
To use this feature, press the k button to select it.
Each press of k selects or deselects this setting.
Clock
To save power, you can switch off the clock display on
Display: Off the DVD recorder. Programmed (TIMER) recordings
will still take place.
Night Mode
Night mode optimises the sound for playback at low
volume. You are therefore less likely to disturb your
neighbours. This only works for Dolby Digital audio on
DVDvideodiscs.Thisoptioncanbeselectedifrequired.
Night Mode works only when analog output.
Iftherecorderisswitchedoff(buttono),theclock
display is also switched off when checked.
If the recorder is switched off (button o), the
clock display is visible when unchecked.
To use this feature, press the k button to select it.
Each press of k selects or deselects this setting.
To use this feature, press the k button to select it.
Each press of k selects or deselects this setting.
NOTE:
NOTE:
-
When you press 4, other items in the System Menu can be selected.
-
When you press 4 , other items in the System Menu can be selected.
Set other items as necessary.
Set other items as necessary.
5. To end setting, press SYSTEM MENU.
5. To end setting, press SYSTEM MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Setting Item
Explanation
Setting the Language
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press SYSTEM MENU to display the System Menu.
3. Select “Language” using 8 or 2, and press 6 once. The setting
items at "Language Options" on the right of the screen can now be
selected using 8 or 2.
PBC Enable This function lets you activate or deactivate the PBC
menu (Playback Control) for VCD only.
When you press the k button to select this item,
thisfeatureisturnedon. Eachpressofthekbutton
toggles this feature on and off.
4. Select the item to be changed using 8 or 2, and change the set-
tings.
Adapt Disc Format
When you insert a disc (DVD+R : not finalised or DVD+RW) recorded
on other DVD recorder, “Adapt Disc Format” will appear under the “PBC
Enable”.
System Menu
System Menu
Video
Language Options
Sound
Audio
English
Video
Feature Options
Subtitle
Menu
Off
Feature
Language
Recording
Setup
Sound
Access Control
Status Display
Resume
Press OK
English
Feature
Language
Recording
Setup
Country
United Kingdom
Auto Standby
Clock Display: Off
PBC Enable
Adapt Disc Format
Press OK
Setting Item
Explanation
Audio
Set the DVD audio language. When you press the
k button, the selection items are displayed. Select
the desired item using 8 or 2, and press the k
button.
Setting Item
Explanation
Adapt Disc
Format
This menu allows you to edit the disc menu on the
disc recorded on other DVD recorder.
Press the k button.
Subtitle
Set the DVD subtitle language. If subtitle language is
notavailable, theDVDrecorderpicksthe firstavailable
language.
When you press the k button, the selection items
are displayed. Select the desired item using 8 or 2,
and press the k button.
Adapt Disc Menu
This Disc Has a Different Menu
Menu
Set the menu display language.
OK to Replace Menu
Cancel
When you press the k button, the selection items
are displayed. Select the desired item using 8 or 2,
and press the k button.
Country
Set this to call up the specific settings for the respec-
tive country.
When you press the k button, the selection items
are displayed. Select the desired item using 8 or 2,
and press the k button.
NOTE:
-
When you press 4, other items in the System Menu can be se-
lected.
Set other items as necessary.
5. To end setting, press SYSTEM MENU.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Settings
Parental Level Control
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press SYSTEM MENU to display the System Menu.
3. Select “Recording” using 8 or 2, and press 6 once. The setting
items at "Recording Options" on the right of the screen can now be
selected using 8 or 2.
Films on pre-recorded DVD discs may contain scenes not suitable for
children. Therefore, some discs may contain “Parental Control” rating
(level) information that applies to the entire disc or to certain scenes on
the disc. The appropriate scenes have filter values that reach from 1-8.
If such a scene is detected during playback, the filter value set on the
DVD recorder is compared to the scene. If the filter value is higher than
the setting, an alternative scene will be played (if available).
4. Select the item to be changed using 8 or 2, and change the set-
tings.
What do the Rating (Level) mean?
Rating (Level) Off (displayed as “--”) means that parental level control is
not active. Rating (Level) 1 is most restrictive. It means without entering
correct password, child cannot view the scenes that are not suitable for
children,Rating(Level)8isleastrestrictive.Withoutenteringthepasscode,
the scenes can be viewed.
System Menu
Video
Recording Options
Sound
Record Mode
Filter Mode
SP
What happens if a DVD scene contains a higher level than the rating
set?
If the recorder does not find a suitable alternative, playback will stop and
you must enter the four-digit passcode.
Standard
Off
Feature
Language
Recording
Setup
Auto Chapters
SAT Record
Dual Language
Off
Setting parental level control
Set parental level control as follows.
Language 1
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV's manual.)
2. Press SYSTEM MENU to display the System Menu.
3. Select "Feature" using 8 or 2, and press 6 once. The setting items
at "Feature Options" on the right of the screen can now be selected
using 8 or 2.
Setting
Item
Explanation
Record
Mode
Set the picture quality during recording. When you
press the k button, the selection items are displayed.
Select the desired item using 8 or 2, and press the
k button.
4. Select "Access Control", and press the k button.
System Menu
See Page 17.
Filter
Mode
The filter can be set to “Standard” (Normal) or “Sport”
(for fast movements)
Video
InLP,EPorEP+recordingmode,youcanselecttheSport
setting in Filter Mode to optimize the video recording
for images that contain fast movements, like sports. The
setting does not influence HQ or SP recording mode.
When you press the k button, the selection items are
displayed. Select the desired item using 8 or 2, and
press the k button.
Feature Options
Sound
Access Control
Status Display
Resume
Press OK
Feature
Language
Recording
Setup
Auto Standby
Clock Display: Off
Auto
Chapters
When this feature is turned On, chapters can be auto-
matically marked with chapter markers at several minute
intervals during recording.
When you press the k button, the selection items are
displayed. Select the desired item using 8 or 2, and
press the k button.
5. Select the item to be changed using 8 or 2, and change the set-
SAT
Record
When a satellite tuner or other equipment on which timer
recording can be set are connected to the DVD recorder,
video can be recorded synchronized with the start of the
broadcast without having to reserve recording on the
DVD recorder. When using this feature, specify the input
terminal that the equipment is connected to. When this
feature is not used, set to Off.
tings.
Set Parental Controls
[ ] [ ] [ ] [ ]
Enter Code
Level:Off
When you press the k button, the selection items are
displayed. Select the desired item using 8 or 2, and
press the k button.
Set Country
United Kingdom OK
Dual
When recording dual language programmes, set which
Language language to record. When you press the k button, the
selection items are displayed. Select the desired item
using 8 or 2, and press the k button.
Press SYSTEM to Save and Exit
NOTE:
-
When recording input from the DV-IN (DV socket on
thefrontpanel),stereo1languagefromDVequipment
is recorded regardless of the setting of this item.
NOTE:
-
When you press 4, other items in the System Menu can be se-
lected.
Set other items as necessary.
5. To end setting, press SYSTEM MENU.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
To play back a DVD video set with parental level
controls.
If you attempt to play back a DVD video set with parental level controls,
the following screen will be displayed:
Setting Item
Enter Code
Explanation
The passcode for setting parental level is required.
(When the DVD recorder is shipped from the factory,
nopasscodeisset. So, thepasscodemustfirstbeset.)
Follow the procedure below to set the passcode.
1) "Enter code" will be displayed. Enter a four-digit
codeusingthenumberbuttons. Enteredcodesare
indicated by "*".
Enter Passcode to Continue
The Disc You are Attempting to View
is Protected with a Passcode.
Set Parental Controls
Enter the Passcode to Continue
[*] [*] [*] [ ]
Enter Code
Level:Off
[ ] [ ] [ ] [ ]
Enter Code
Set Country
United Kingdom OK
Enter the four-digit passcode to start playback.
Press SYSTEM to Save and Exit.
2) When "Confirm Code" is displayed, enter the
four-digit code again for confirmation. When the
code has been set, the display returns to "Press
k".
NOTE:
-
When the "Set Parental Controls" screen is dis-
played from the second operation onwards, "Enter
Code" will be displayed on the 1st line instead of
"Set Code". Parental level control can be set again
by entering the correct passcode.
If you have forgotten the passcode, press e four times
to set the entry field to a non-set state. In this state,
set the passcode again.
Parental
Level
Set the level of parental control.
Press the k button, and then press 4 or 6 to
adjust the level. Press the k button again to apply
the level you set.
Set Parental Controls
Set Code
Level:2
Press OK
Set Country
United Kingdom
Press OK to Select
Press SYSTEM to Save and Exit.
Set Country The set filter values depend on the respective country.
It is therefore necessary to enter the country to which
these filter values apply.
When you press the k button, the country name is
displayed. Select the desired country using 8 or 2,
and press the k button.
NOTE:
-
When you press 4, other items in the System Menu can be se-
lected.
Set other items as necessary.
6. To send setting, press SYSTEM MENU.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
Solution
The unit does not work im-
mediately o button is
pressed.
- No solution. This unit needs time to start operating
because of its structure.
- It takes time for power to be supplied after the o
button has been pressed.
No power.
No picture.
- The main lead is disconnected.
- Plug the main lead into the wall outlet securely.
- The TV is not set to receive DVD Recorder signal - Select the appropriate video input on the TV so that
output.
the picture from the DVD Recorder appears on the
TV screen.
- The video cable is not connected securely.
- The TV is turned off.
- Connect the video cable securely.
- Turn on the TV.
No sound.
- The equipment connected with the audio cable is not - Select the correct input mode on the audio receiver
set to receive DVD Recorder signal output.
so you can listen to the sound from the DVD Re-
corder.
- The audio cables are not connected securely.
- Connect the audio cable securely.
- The power of the equipment connected with the audio - Turn on the equipment connected with the audio
cable is turned off.
cable.
- The audio connecting cord is damaged.
- Replace it with a new one.
- Replace a disc.
“Disc Error” message ap- - The disc which is not supported is inserted.
pears.
Playback picture is poor.
- The disc is dirty.
- Clean the disc.
DVD Recorder does not start - No disc is inserted.
playback.
- Insert a disc. (Check that the disc indicator on the
front panel display is lit.)
- An unplayable disc is inserted.
- Insert a playable disc. (Check the disc type, colour
system, and regional code.)
- The disc is placed upside down.
- Place the disc with the playback side down.
- The disc is not placed within the guide.
- Place the disc on the disc tray correctly inside the
guide.
- The disc is dirty.
- Clean the disc.
- The Parental Level Control is set.
- CanceltheParentalLevelControlfunctionorchange
the level.
Picture from external input is - The video signal from the external component is copy- - You cannot connect via th DVD Recorder. Connect
distorted protected. the component directly to your TV.
Some channels are skipped - TheskippedchannelsweredeletedwiththeCH.Add/Del - Use the CH. Add/Del feature to restore channels.
when using CH (+/-)
feature.
See “Arranging and Deleting Channels" on page
16.
Pictureorsoundofbroadcasting - Antenna or cables are loose.
channel is weak or missing.
- Tighten connections or replace cable.
- Wrong Tuning Band is selected in the DVD Recorder - Tryall“Auto-SettingtheChannel”options;seepage
Setup menu.
15 for details.
Camcorder image not shown.
- Camcorder is off.
- Turn camcorder on and operate properly.
Camcorder image viaA/V input - DVD Recorder’s source is not set to AV3, AV3-S or DV - Use INPUT to select AV input channel AV3, AV3-S
orDVINtoDVDRecorderisnot
shown on TV screen.
IN.
or DV IN.
Can’t play disc recorded on - Some players will not play even a finalized disc recorded - No solution
this DVD Recorder on another
DVD player.
in Video mode.
- Discsrecordedwithcopy-oncematerialcannotbeplayed - No solution
on other players.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
Cannot record or did not record - The remaining blank space on the disc is insufficient.
- Use another disc.
- You can not record the source.
successfully.
- The source you are trying to record is copy-protected.
- Whensettingtherecordingchannel,thechannelistuned - Select the channel on the DVD Recorder’s built-in
on the TV’s own tuner. TV tuner.
- When recording to disc, programs that are copy-once - You can not record the source.
protected cannot be recorded.
- The disc is recorded on NTSC on other equipment.
- Clock in the DVD Recorder is not set to correct time.
- Timer has been programmed incorrectly.
- You can not record on the disc already recorded on
NTSC. Replace a disc.
Timer Recording not possible.
- Set clock to correct time. See “Setting the Clock”
on page 15.
- Reprogram Timer. See “Timer Recording” on page
18.
- TIMERindicatorlightdoesnotappearafterprogramming - Reprogram Timer.
timer.
Stereo Audio Record and/or - TV is not Stereo-compatible.
Playback not present.
- No solution.
- No solution.
- Broadcast program is not in stereo format.
- DVD Recorder A/V Out jacks are not connected to TV - Make A/V connections. Stereo is available only via
A/V In jacks. A/V output from DVD Recorder.
- DVDRecorderAudio/VideoOutisnotselectedforviewing - Select AUX or A/V source as TV input.
on the TV.
- DVD Recorder’s TV audio channel is set to MONO.
- Set TV audio channel mode to Stereo. See “Audio
Output Settings” on page 32.
Remote control does not work - The remote control is not pointed at the remote sensor - Point the remote control at the remote sensor of
properly.
of the DVD Recorder.
the DVD Recorder.
- The remote control is too far from the DVD Recorder.
- Operate the remote control within 6m.
- There is an obstacle in the path of the remote control - Remove the obstacle.
and the DVD Recorder.
- The batteries in the remote control are exhausted.
- Replace the batteries with new ones.
Playback starts midway after a - If the Resume function is on, playback starts from the - Turn the Resume function off. See "Operation and
DVD video is inserted and the
6 button is pressed.
previous position where that disc was stopped for the
next 20 discs.
State Display Settings" on page 32.
Moisture Condensation
Moisture condensation can occur:
In locations where moisture condensation may occur:
- When the DVD Recorder is moved from a cold place to a warm - Keep the DVD Recorder plugged into anAC power outlet with POWER
place.
on. This will help prevent condensation.
- Under extremely humid conditions.
- Whencondensationhasoccurred,waitafewhoursfortheDVDRecorder
to dry before using it.
Reset the DVD Recorder
If you observe any of the following symptoms:
- When the DVD Recorder is plugged in, but the power will not be turned on or off
- When the display window does not work
- When the DVD Recorder does not operate normally
Before resetting, please proceed the following procedure first.
1. Turn the o button off.
2. Disconnect the Power lead.
If these operation does not work, reset the DVD recorder as follows.
You can reset the DVD Recorder as follows:
1. Disconnect the DVD Recorder from the power outlet.
2. Press and hold down the o button on the front of the recorder while reconnecting to the power outlet.
3. Release o when “IS TV ON?” appears in the display.
4. Complete the first installation again and reset any items you have adjusted during your use of the recorder.
Warning!!
-
The information stored in memory may be reset (cleared).
37
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Cleaning the cabinet
Use a clean soft cloth moistened with plain lukewarm water and wrung dry. Never use benzol, benzene or other strong chemical cleaners since these
could damage the finish of your unit. It is important that no liquid reaches the inside of the unit.
SPECIFICATIONS
Playable discs
DVD-Video
DVD+R
Connections
Front panel
Video In : Pin jack (yellow) X1
DVD+RW
S-Video In : S terminal X1
DVD-RW(Video mode)
Audio L/R In : Pin jack (white/red) X1
DV In : DV (4-pin) terminal X1
Rear panel
DVD-R(Video mode)
Audio-CD(CD-DA)
MP3 CD
Scart 1: AV connector (RGB/S-Video/Video/Audio out)
(Video/Audio in)
JPEG CD
Kodak Picture CD
Scart 2: AV connector (RGB/S-Video/Video/Audio in)
(Video/Audio out)
Recordable discs
Video Out : Pin jack (yellow) X1
DVD+RW
DVD+R
S-Video Out : S terminal X1
Component Video Out : Pin jack (Y:green/Pb:Blue/Pr:red) X1
Audio L/R Out : Pin jack (white/red) X1
Digital audio out : Optical X1
Video recording format
DVD+RW/+R Format
Power requirements
Audio recording format
230V AC, 50Hz
Dolby Digital (2ch)
Power consumption
30Watts
Recording time (with 4.7GB disc)
HQ mode: Approx. 60 minutes
SP mode: Approx. 120 minutes
LP mode: Approx. 180 minutes
EP mode: Approx. 240 minutes
EP+ mode: Approx. 360 minutes
(clock display: off mode: 3 Watts)
Dimensions (W X H X D)
Approx. 430 X 64 X 320mm
Weight
TV system
Approx. 3.7kg
PAL standard system
Tuner
System: PAL-I/I
Time indication
24-hour system
Timer
8-event programmable
The specifications and appearance of this product are subject to change
for improvements without notice.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE TO CUSTOMER
Sanyo Europe Ltd. (the Company) guarantees to the initial retail
purchaser that if this equipment is or becomes defective and that,
in the opinion of the Company, the defect is due to faulty material or
workmanship the Company will, for a period of 12 calendar months
from the date of sale to the original purchaser repair or replace, at
its sole option, free of charge, any such defective component part of
the equipment, always provided that: -
Thank you for buying Sanyo. This equipment should give you many
years of pleasure and faithful service but in the event that a fault
occurs, the following notes for your guidance may be helpful:-
1. PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH WILL
BE REQUIRED FOR SERVICE DURING GUARANTEE.
2. If your Sanyo equipment proves faulty during the period of guar-
antee, take it or send it back to the dealer who originally supplied
ittogetherwiththisguaranteeandtheproofofpurchase. Wehave
made arrangements with our approved dealers under which they
will carry out in-guarantee service repairs on our behalf. In this
way, we hope to reduce to a minimum the amount of time you
will be without your equipment.
3. If for some reason it is impossible to return the equipment to
the original supplies, please contact our Consumer Relations
Department at the address below for further advice.
4. Should the equipment require servicing after the expiry of the
guarantee period, take or send it to the original supplier or any
other Sanyo dealer. He will be pleased to give you a quotation
for the repair. If you are in any doubt about what to do, write to
us at the address below or telephone:
1. The equipment has at all times been used in accordance with the
operating instructions issued by the Company, and has not been
connected to an electrical mains supply for which it has not been
adjusted.
2. Accidentaldamage,ordamagecausedbynegligenceormisuseby
theuser,includingleakagefromexhaustedbatteries,isspecifically
excluded.
3. Unauthorised repairs, or any modification to the equipment which
has not been expressly approved by the Company, shall render
this guarantee null and void.
4. Failure due to fair wear and tear of any item, such as batteries,
recordplayingstyli,andtaperecording,playbackanderaseheads
is specifically excluded.
This guarantee is not transferable and is only applicable within the
United Kingdom (and the Republic of Ireland). Nothing in this express
guarantee affects the statutory rights available to the purchaser of
this equipment.
Consumer Relations Department,
Sanyo Europe Ltd.,
18 Colonial Way,Watford
WD24 4PT
Tel: Watford 246363
NOTE:
This guarantee supersedes any other form of guarantee that may
inadvertently have been enclosed with or attached to the product.
(August 1978).
R6
(UK) 1AD6P1P2109--
SANYO Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|