Sanyo Cordless Telephone CLT D5882 User Guide
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page i  
INSTRUCTION MANUAL  
CLT-D5880  
CLT-D5882  
CLT-D5883  
5.8-GHz Cordless Telephone  
with Caller ID & Visual Call Waiting  
IMPORTANT  
Charge the handset battery pack for a full 15-20 hours before using your  
cordless handset for the first time.  
SANYO Canada Inc.  
www.sanyo.ca  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 1  
CONTENTS  
Getting Started  
Introduction...................inside front cover  
Features.........................inside front cover  
Controls and Functions...........................E2  
CALLER ID FEATURES  
Caller ID and CIDCW  
(Caller ID on Call Waiting)....................E39  
Viewing the Caller ID List.....................E41  
Deleting a Caller ID Message .............E42  
Using the Caller ID Message List .......E43  
Call Waiting Deluxe Features..............E45  
Using the  
Interface  
GETTING STARTED  
Checking the Package Contents...........E4  
Setting Up the Phone..............................E4  
Mounting the Base Unit On a Wall.......E9  
MULTI-HANDSET FEATURES  
USING THE INTERFACE  
Using the Walkie-Talkie Mode  
Display and Icons..................................E11  
Soft Key Function ..................................E13  
Main Menu Options...............................E14  
Setting Menu Options...........................E15  
(CLT-D5882/CLT-D5883 only).................E46  
3-Way Conferencing .............................E47  
Intercom/Call Transfer Feature...........E47  
Basics  
ADDITIONAL INFORMATION  
BASICS  
Changing the Digital Security Code ...E49  
Find Handset...........................................E49  
Installing the Beltclip............................E50  
Optional Headset...................................E50  
Note on Power Sources.......................E51  
Troubleshooting .....................................E52  
Technical Information...........................E54  
Making and Receiving Calls ................E24  
Call Waiting ............................................E26  
Placing a Call on Hold...........................E26  
Redialing a Call ......................................E27  
Adjusting the Ringer, and  
Directory  
Earpiece and Speaker Volume............E28  
Temporarily Muting the Ringer ...........E28  
Mute Microphone..................................E28  
Tone Dialing Switch-over.....................E29  
Traveling Out of Range .........................E29  
Privacy Mode .........................................E29  
Using One Touch  
THE SANYO  
COMFORT WARRANTY . . . . . . . . .E55  
Caller ID  
Features  
MAIN MENU FLOW CHART . . . . .E57  
Voice Mail Access ................................E30  
DIRECTORY  
Phonebook (Storing Phone Numbers,  
Names, Distinctive Rings and  
Speed Dial) .............................................E31  
Chain Dialing ..........................................E32  
Steps for Entering Names and  
Multi-handset  
Features  
Special Characters................................E33  
Viewing the Phonebook........................E35  
Making Calls Using the Phonebook ...E36  
Speed Dialing .........................................E36  
Editing or Erasing a Stored Name,  
Phone Number, Distinctive Ring and  
Speed Dial...............................................E37  
Copying Phonebook Locations  
Additional  
Information  
(CLT-D5882/CLT-D5883 only).................E38  
E1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 2  
Controls and Functions  
1
5
6
13  
2
7
3
8
END  
14  
15  
16  
TALK  
FLASH  
VOL  
CID  
9
DEF  
1
4
3
ABC  
JKL  
2
5
8
0
GHI  
6MNO  
9WXYZ  
4
7PQRS  
TUV  
OPER  
TONE  
10  
11  
12  
17  
18  
INTCM  
/HOLD  
SPEAKER  
19  
20  
1. Handset Antenna  
2. Beltclip Hole  
11. SPEAKER  
12. INTCM (intercom) /HOLD  
13. Headset Jack Cover  
14. TALK/FLASH  
3. Speakerphone Speaker and  
Ringer  
4. Handset Battery Compartment  
5. New Message LED  
6. Handset Earpiece  
15. END  
16. CID (Caller ID)  
17. #/ (right cursor)  
7. LCD Display  
18.  
(phonebook)  
8. Soft Keys  
19. Handset Microphone  
9. VOL L / M (volume up/down)  
10. /TONE/ (left cursor)  
20. Handset Charging Contacts  
E2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 3  
22  
23  
21  
24  
25  
26  
21. Base Charging Contacts  
22. Base Antenna  
24. PAGE  
25. DC IN 9V Jack  
26. TEL LINE Jack  
23. Base CHARGE LED  
29  
27  
28  
For multi-handset packs only  
27. Charging Contacts  
28. Charger CHARGE LED  
29. DC IN 9V Jack  
E3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 4  
GETTING STARTED  
Checking the Package Contents  
Make sure you have received the following items in the package.  
For CLT-D5880  
• Base unit (1)  
For CLT-D5882  
• Base unit (1)  
For CLT-D5883  
• Base unit (1)  
• AC adapter (1)  
• Telephone cord (1)  
• Handset (1)  
• AC adapters (2)  
• Telephone cord (1)  
• Handsets (2)  
• AC adapters (3)  
• Telephone cord (1)  
• Handsets (3)  
•
•
Rechargeable battery (1)  
This instruction manual (1)  
•
•
Rechargeable batteries (2)  
This instruction manual (1)  
•
•
Rechargeable batteries (3)  
This instruction manual (1)  
• Belt clip (1)  
• Wall mount bracket (1) • Charger (1)  
• Belt clips (2)  
• Belt clips (3)  
• Chargers (2)  
• Battery order sheet (1) • Wall mount bracket (1) • Wall mount bracket (1)  
• Battery order sheet (1) • Battery order sheet (1)  
Setting Up the Phone  
Do the following steps:  
A. Choose the best location  
B. Install the rechargeable battery pack into the handset  
C. Connect the base unit and charge the handset  
A. Choose the best location  
Here are some important guidelines you should consider:  
• The location should be close to both a phone jack and a continuous power  
outlet that is not switchable.  
• Keep the base and handset away from sources of electrical noise such as  
motors, microwave ovens, and fluorescent lighting.  
• The base should be placed in an open area for optimum range  
and reception.  
• The base can be placed on a desk, tabletop, or mounted on a standard wall  
plate.  
Note:  
• If your home has specially wired alarm equipment connected to the telephone line,  
be sure that installing the system does not disable your alarm equipment.  
If you have questions about what will disable your alarm equipment, contact your  
telephone company or a qualified installer.  
E4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 5  
GETTING STARTED  
B. Install the rechargeable battery pack into the handset  
The handset is powered by a rechargeable battery pack.  
The battery recharges automatically when the handset is placed in the base  
unit or charging cradle.  
IMPORTANT  
Use only the SANYO rechargeable battery pack supplied with your cordless telephone.  
Charge the handset battery pack for at least 15-20 hours before using your  
new cordless telephone for the first time! To maximize the charge capacity of  
your battery pack, DO NOT plug the telephone cord into the base unit and  
wall jack until the battery is fully charged.  
1
2
Press down on the handset battery case cover  
(use the finger indention for a better grip) and  
slide the cover downward to remove.  
Plug the battery pack connector (red & black  
wires) into the jack inside the battery  
compartment. (The connector notches fit into the  
grooves of the jack only one way.) Match the  
wire colors to the polarity label in the battery  
compartment, connect the battery and listen for  
a click to ensure connection.  
3
4
Make sure you have a good connection by  
pulling slightly on the battery wires. If the  
connection is secure, the battery jack will remain  
in place.  
Place the battery case cover back on the handset  
by sliding it upwards until it clicks into place.  
E5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 6  
GETTING STARTED  
Low Battery Alert  
When the battery pack is very low and needs to be charged, the phone is  
programmed to eliminate functions in order to save power. If the phone is not  
in use, ¨Low Battery¨ appears on the LCD and none of the keys will operate.  
If the phone is in use, ¨Low Battery¨ flashes and the handset beeps. Complete  
your conversation as quickly as possible and return the handset to the base  
unit for charging.  
Note:  
• Even when the battery pack is not being used, it will gradually discharge over a long  
period of time.  
Cleaning the Battery Charging Contacts  
To maintain a good charge, it is important  
to clean the charging contacts on both the  
handset and the base unit once a month.  
Use a clean pencil eraser or superfine steel  
wool. Avoid touching the cabinet area of  
the phone or scratches may occur.  
contacts  
Caution: Do not use paint thinner, benzene,  
alcohol, or other chemical products. Doing  
contacts  
so may discolor the surface of the  
telephone and damage the finish.  
Terminology  
• Talk Mode -  
The handset is off the base and the TALK/FLASH key has been pressed,  
enabling a dial tone.  
• Standby Mode -  
The handset is not in use, off the base, and the TALK/FLASH key has not  
been pressed. A dial tone is not present.  
E6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 7  
GETTING STARTED  
C. Connect the base unit and charge the handset  
1
Connect the AC adapter to the  
DC IN 9V jack and to a standard  
120V AC wall outlet.  
2
3
Set the base on a desk or tabletop.  
Place the handset in the base unit  
for 15-20 hours without interruption.  
The base unit’s LED light (labeled  
CHARGE) illuminates once the  
handset is placed in the base. The  
LED light will illuminate whether the  
battery pack is connected or not.  
If the base CHARGE LED light does not illuminate:  
• Check to see if the AC adapter is plugged into the base unit and the  
electrical wall outlet properly.  
• Check to see if the handset is sitting correctly in the base and making  
good contact with the base unit’s charging contacts.  
Notes:  
• Connect the AC adapter to a continuous power supply.  
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.  
• It is normal for the handset and base to get warm, when the handset is charging in the  
base unit.  
IMPORTANT  
• Use only the supplied SANYO AC adapter. Do not use any other AC adapter.  
• Do not place the power cord so that it creates a trip hazard or where it could become  
damaged and create a fire or electrical hazard.  
E7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 8  
GETTING STARTED  
4
Once the handset battery pack is  
fully charged, connect the telephone  
line cord to the TEL LINE jack and to  
a telephone outlet.  
To telephone  
line outlet  
To TEL LINE  
Telephone line cord (supplied)  
Tip:  
If your telephone outlet isn't modular, contact your telephone  
company for assistance.  
Modular  
Connecting the Charger (for CLT-D5882/CLT-D5883)  
1
Connect the AC adapter to the  
DC IN 9V jack and to a standard  
120V AC wall outlet.  
2
Set the charger on a desk or  
tabletop, and place the handset  
in the charger with the keypad  
facing forward. (See "B. Install  
the rechargeable battery pack  
into the handset" on page E5.)  
Note:  
• Charge the handset battery pack for at least 15-20 hours before using your new cordless  
telephone for the first time.  
Register the 2nd and 3rd units.  
E8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 9  
GETTING STARTED  
Mounting the Base Unit On a Wall  
Standard Wall Plate Mounting  
This phone can be mounted on any standard wall plate.  
1
Put the AC adapter and the  
telephone line cord through the  
hole on the wall mount adapter.  
2
3
4
Plug the AC adapter into the  
DC IN 9V jack.  
Plug the telephone line cord into  
the TEL LINE jack.  
Slide the wall mount adapter into  
the notches on the base.  
5
6
7
Plug the AC adapter into a  
standard 120V AC wall outlet.  
Hook the cord on the notch of the  
wall mount adapter.  
Plug the telephone line cord into  
the telephone outlet. Hook the  
cord on the notch of the wall  
mount adapter.  
Align the mounting slots on the  
base with the mounting posts on  
the wall. Then push in and down  
until the phone is firmly seated.  
To remove, push up  
the tab on the wall  
mount adapter as  
shown.  
IMPORTANT  
DO NOT use an AC outlet controlled by a wall switch.  
E9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 10  
GETTING STARTED  
Direct Wall Mounting  
If you don't have a standard wall plate, you can mount your phone directly to  
the wall. Before doing this, consider the following:  
• Avoid electrical cables, pipes, or other items behind the mounting location  
that could cause a hazard when inserting screws into the wall.  
• Try to mount your phone within 5 feet of a working phone jack to avoid  
excessive cable lengths.  
• Make sure the wall material is capable of supporting the weight of the base  
and handset.  
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices  
suitable for the wall material where the base unit will be placed.  
1
2
Insert two mounting screws into the wall, (with their  
appropriate anchoring device), 3-15/16 inches apart.  
Allow about 1/8 of an inch between the wall and  
screw heads for mounting the phone.  
Refer to steps 1 through 7 on page E9 to mount the  
telephone.  
E10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 11  
THE INTERFACE  
USING  
Display and Icons  
Example of the standby mode display  
Ringer off icon (when the ringer is off) / day of the week and time / battery icon  
Handset ID  
Number of new Caller ID calls received  
(If there are no new Caller ID messages, the Handset ID appears here.)  
SUN 12:00A  
Handset #1  
New CID:  
REDIAL MENU  
5
Icon  
Appears During  
Description  
Battery icons indicate the handset battery  
status. This icon changes depending on  
the battery status (empty, low, medium  
and full).  
Standby/Talk  
The Ringer off icon indicates that ringer is  
turned off.  
Standby  
Talk  
The Mute icon appears when you mute  
the handset.  
The Speaker icon appears when the  
handset speaker phone is used.  
Talk  
The Privacy icon appears when the  
Privacy Mode is turned on.  
Talk  
E11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 12  
THE INTERFACE  
USING  
Animation Displays  
The handsets have a variety of animation displays. Below are examples of the  
animation screens and what they mean:  
Turning on the phone  
Hanging up the phone  
Confirmation (Done!)  
1:53  
End  
Welcome!  
Done!  
Please Wait...  
REDIAL  
MENU  
Find Handset/  
Paging the Handset  
Deleting (Deleted!)  
Making a call  
Talk  
Paging  
Deleted!  
1:54  
MUTE  
CWDX PRIVACY  
Also, the animation display changes depending on the ringer volume setting.  
Ringer Volume  
Ringer Volume  
Ringer Volume  
]
REDIAL MENU  
REDIAL MENU  
REDIAL MENU  
Out of Range  
Unavailable  
Low Battery  
Out Of Range  
Unavailable  
Low Battery  
REDIAL MENU  
REDIAL MENU  
E12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 13  
THE INTERFACE  
USING  
Soft Key Function  
"Soft" keys are keys that change function during the operation of the phone.  
There are three soft keys on each handset. Soft Keys allow you to:  
- Access the main menu  
- Access stored Caller ID messages  
- Set up CIDCW options (Caller ID on Call Waiting)  
- Redial one of the last three numbers dialed from the handset  
- Store or edit phone numbers  
- Access Voice mail waiting  
Note: The soft keys will not appear while the handset is charging.  
The function of each soft key is determined by the icon that appears directly  
above it. For example, when the handset is in standby mode, pressing soft  
key 1 will redial the last dialed number. When the handset is in talk mode,  
pressing soft key 1 will mute the microphone.  
Complete information on the features controlled by the soft keys can be found  
under each feature.  
In standby mode  
In talk mode  
SUN 12:00A  
Handset #1  
Talk  
New CID:  
REDIAL MENU  
5
0:00  
CWDX PRIVACY  
MUTE  
Soft key 1 Soft key 2 Soft key 3  
Soft key 1 Soft key 2 Soft key 3  
E13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 14  
THE INTERFACE  
USING  
Main Menu Options  
Your phone has five main menu options: Walkie-Talkie Mode, Room/Baby  
Monitor, Handset Setup, Global Setup and Deregister HS.  
Default Settings  
The default settings set from the factory match the features that most people  
use. You may not need to change them. However, there are a number of  
options you must set and entries you must make in memory to take full  
advantage of all the phone features. The table below lists the default settings.  
Function  
Edit Voice Mail  
Default Settings  
None  
Ringer Tone  
Distinctive Ring  
Automatic Talk (Auto Talk)  
Anykey Answer  
Banner  
Flicker  
On  
Off  
Off  
" "  
English  
level 5  
Language  
Contrast  
Key Touch Tone  
Animation Screen  
Day & Time  
CIDCW  
Area Code  
On  
On  
SUN 12:00 AM  
CW on/CWDX off  
None  
Dial Mode  
Tone  
Voice Mail Tone  
On  
Notes:  
• For Global Setup and Deregister HS menu options, make sure the line is not in use and  
the handsets are within range of the base.  
• Main menu flow chart is provided on page E57.  
E14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 15  
THE INTERFACE  
USING  
Setting Menu Options  
Below are some tips for using the software interface on your phone.  
• Press the MENU soft key to access the main menu.  
• Use VOL/L and VOL/M to scroll through options.  
DirectLink Mode  
Room Monitor  
• Press the OK soft key to make a selection.  
Handset Setup  
BACK  
BACK  
OK  
• Press the BACK soft key to return to the previous  
screen.  
• Press END to exit the menu.  
Walkie-Talkie Mode  
In Walkie-Talkie mode, a pair of handsets can function as two-way radios.  
Walkie-Talkie mode allows two handsets to communicate with each other  
without the base unit or a telephone line. Use them at sporting events or  
while shopping to stay in contact with family members or friends. You must  
set both handsets to Walkie-Talkie mode to activate this feature.  
Note:  
• You must have at least two handsets to use Walkie-Talkie mode.  
Using Walkie-Talkie Mode (for CLT-D5882/CLT-D5883)  
1
Press the MENU soft key and select the DirectLink  
Mode menu. To enter DirectLink mode press  
[ENTER]appears.  
To enter  
DirectLink mode  
press [ENTER]  
BACK  
BACK  
ENTER  
2
3
Press the ENTER soft key to enter Walkie-Talkie mode. You will hear a  
confirmation tone, and DirectLink Mode Completeappears.  
To return to normal mode, press the CANCEL soft key and then the OK soft  
key, or return the handset to the cradle.  
E15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 16  
THE INTERFACE  
USING  
Room/Baby Monitor  
This feature allows you to monitor  
sounds in another room. Place a  
handset in the room you wish to  
monitor; it will function as a  
microphone. A second handset  
can be set to function as a remote  
speaker, allowing you to monitor  
sounds in the room.  
Using Room/Baby Monitor  
1
Press the MENU soft key and select the Room Monitor menu.  
To Room Monitorappears.  
2
3
Select the handset you want to monitor by using VOL/L or VOL/M.  
Press the OK soft key.  
RoomMonitor  
Handset #2  
RoomMonitorappears, and you hear sounds in the  
room where the handset is installed.  
END  
4
To turn off the Room Monitor, press the END soft key, or END.  
Notes:  
• This feature only works when the handset(s) is within the range of the base.  
• You must have at least two handsets to use Room/Baby Monitor.  
During room monitor, if you receive a call, you will hear beeps from the  
earpiece or speaker. Press TALK/FLASH to answer the call.  
E16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 17  
THE INTERFACE  
USING  
Handset Setup  
The following submenu options must be set separately for each handset.  
Programming your Voice Mail Access Number  
1
2
3
Press the MENU soft key. Select the Handset Setup  
menu, and then the Edit Voice Mail submenu.  
Edit V_mail No. appears.  
Edit V_mail No.  
1234567890  
DELETE PAUSE  
OK  
Enter your personal access number using the number keypad (0-9),  
/TONE/ , #/ , the DELETE soft key, or the PAUSE soft key (up to  
20 digits).  
Press the OK soft key. You will hear the confirmation tone.  
To delete the current Voice Mail Access Number, delete all numbers in step 2  
using the DELETE soft key and the OK soft key.  
Selecting a Ringer Tone  
Ringer Tone lets you choose from 10 ringer tones or 10 melodies:  
- Ringers (Flicker, Clatter, Soft Alert, Wake Up, Light Bug, Beep Boop,  
Tone Board, Chip Chop, Party Clap, Reminder)  
- Melodies (Beethoven's Symphony #9 [Beethoven9], For Elise [Elise], We  
Wish You A Merry Christmas [Merry- Xmas], Home Sweet Home [Hm  
Swt Hm], Lorri Song #6 [Lorri Song], When Irish Eyes Are Smiling [Irish  
Eyes], Aura Lee, Let Me Call You Sweet Heart [Sweetheart], Star  
Spangled Banner [Star Spngl], Old MacDonald [Old MacDld])  
You must set the separate ringer tone on each handset.  
1
2
Press the MENU soft key. Select the Handset Setup menu, and then the  
Ringer Tone submenu.  
Ringer Tones  
Press VOL/L or VOL/M to move the pointer. You will  
Flicker  
hear the ringer or melody as you scroll through the Clatter  
options.  
DELETE  
BACK  
OK  
3
When you reach the ringer tone you want, press the OK soft key.  
You will hear a confirmation tone.  
E17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 18  
THE INTERFACE  
USING  
Distinctive Ringer Setup  
Distinctive Ringer allows you to assign a designated ring tone to a stored  
phonebook number (100 stored locations available). When a call is received  
and the Caller ID information matches the information in one of the  
phonebook memory locations, the phone uses the distinctive ring assigned to  
that particular caller. You can assign distinctive rings to multiple phonebook  
memory locations. Switching the setting to Distinctive Off disables distinctive  
ringing: all incoming calls will have a normal ring tone. Switching to  
Distinctive On activates all programmed distinctive ring memory locations.  
1
Press the MENU soft key. Select the Handset Setup  
menu, and then the Distinctive Ring submenu.  
Distinctive Ring  
On  
Off  
DELETE  
BACK  
OK  
2
3
Press VOL/L or VOL/M to select Onor Off  
.
Press the OK soft key. You will hear a confirmation tone.  
Setting the Automatic Talk (Auto Talk)  
Automatic Talk (Auto Talk) allows you to answer the phone simply by  
removing the handset from the cradle. You do not have to press any buttons  
to answer the call.  
Auto Talk  
1
Press the MENU soft key. Select the Handset Setup  
menu and then the Automatic Talk submenu.  
On  
Off  
BACK  
DELETE  
OK  
2
3
Press VOL/L or VOL/M to select Onor Off  
.
Press the OK soft key. You will hear a confirmation tone.  
Setting the Anykey Answer  
Anykey Answer allows you to answer the phone by pressing any number key,  
/TONE/ , or #/ on the handset.  
Anykey Answer  
On  
Off  
BACK  
1
Press the MENU soft key. Select the Handset Setup  
menu, and then the Anykey Answer submenu.  
DELETE  
OK  
2
3
Press VOL/L or VOL/M to select Onor Off  
.
Press the OK soft key. You will hear a confirmation tone.  
E18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 19  
THE INTERFACE  
USING  
Setting the True Banner  
True Banner lets you customize the name your handset displays.  
The name will be displayed on the LCD screen during standby mode,  
Intercom, Intercom Hold, Room Monitor and Copy Phonebook operation.  
The banner name will be displayed on the receiving handset as well.  
Banner  
1
2
3
Press the MENU soft key. Select the Handset Setup  
menu, and then the Banner submenu.  
Mom'sPhone #1  
__________  
DELETE  
BACK  
OK  
Use the number keypad (0-9), /TONE/ , #/ , or  
the DELETE soft key to enter or edit the name.  
Press the OK soft key. You will hear a confirmation tone.  
Selecting a Language  
Language selects which language the menu display will use. Choose from  
English, French, or Spanish.  
Language  
1
2
3
Press the MENU soft key. Select the Handset Setup  
menu, and then the Language submenu.  
English  
BACK  
OK  
Press VOL/L or VOL/M to choose "English",  
"Français" (French), or "Español" (Spanish).  
Press the OK soft key. You will hear a confirmation tone.  
Adjusting the LCD Contrast  
Contrast adjusts the handset LCD brightness. Choose one of the 10 levels for  
optimum viewing.  
1
2
3
Press the MENU soft key. Select the Handset Setup  
menu and then the Contrast submenu.  
Contrast  
-
+
BACK  
OK  
Press VOL/L or VOL/M to adjust the contrast of the  
LCD (10 levels).  
Press the OK soft key. You will hear a confirmation tone.  
E19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 20  
THE INTERFACE  
USING  
Setting the Key Touch Tone  
Key Touch Tone is the tone your keypad makes when keys are pressed.  
You can turn this tone on or off.  
1
Press the MENU soft key. Select the Handset Setup  
menu and then the Key Touch Tone submenu.  
Key Touch Tone  
On  
Off  
BACK  
DELETE  
OK  
2
3
Press VOL/L or VOL/M to select Onor Off  
.
Press the OK soft key. You will hear a confirmation tone.  
Setting the Animation Screen  
The Animation screen displays animation on the  
handset LCD. The animations will be displayed on the  
LCD screen during a call, ringer volume setting, when  
you hang up, and so on.  
Ringer Volume  
REDIAL MENU  
Animation Screen  
1
Press the MENU soft key. Select the Handset Setup  
menu and then the Animation Screen submenu.  
On  
Off  
DELETE  
BACK  
OK  
2
3
Press VOL/L or VOL/M to select Onor Off  
.
Press the OK soft key. You will hear a confirmation tone.  
See "Animation Displays" on page E12 for all the available screens.  
E20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 21  
THE INTERFACE  
USING  
Global Setup  
If you change one of the global settings, you change that setting for all  
registered handsets. Only one handset can change global settings at a time.  
Setting Day and Time  
Day & Time sets the day and time of your display.  
Day & Time  
1
2
Press the MENU soft key. Select the Global Setup  
menu, and then the Day & Time submenu option.  
MON 12:00 AM  
[ / ]  
SAVE  
BACK  
Press VOL/L or VOL/M to select the day of the  
week, and then the / soft key.  
3
4
5
Press VOL/L or VOL/M to set hour, and then press the / soft key.  
Press VOL/L or VOL/M to set minute, and then press the / soft key.  
Press VOL/L or VOL/M to choose AMor PM, and then press the SAVE soft  
key. You will hear a confirmation tone.  
Note:  
• For setting the Day and Time, the idle time-out is extended to 2 minutes.  
Setting CIDCW (Caller ID on Call Waiting)  
Caller ID on Call Waiting (CIDCW) displays the name and number of an  
incoming call while you are on the line. Call Waiting Deluxe (CWDX) allows  
you to handle call waiting calls in seven different ways.  
1
2
Press the MENU soft key. Select the Global Setup  
menu, and then the CIDCW submenu.  
CIDCW  
CW On /CWDX On  
CW On /CWDX Off  
DELETE  
BACK  
OK  
Press VOL/L or VOL/M to select CW On  
/CWDX On, CW On/CWDX Off,  
or CW OffCWDX Off, and then press the OK soft key. You will hear a  
/
confirmation tone.  
E21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 22  
THE INTERFACE  
USING  
Setting the Area Code  
If you enter a 3-digit area code number in the "Area Code" option, your local  
area code does not appear in the Caller ID message. For calls received from  
outside your local area code, you will see a full 10-digit number.  
Area Code  
1
2
3
Press the MENU soft key. Select the Global Setup  
menu, and then the Area Code submenu.  
__  
DELETE  
BACK  
OK  
Press the number keypad (0-9) to enter a 3-digit  
area code.  
Press the OK soft key. You will hear a confirmation tone.  
Notes:  
• If your calling area requires 10-digit dialing, do not program this option.  
• If the area code has already been stored in memory, the stored area code will be  
displayed. To change it, use the DELETE soft key and number keys to enter the new  
area code.  
Setting the Dial Mode  
Sets the dial mode to tone or pulse. Most phone systems use tone dialing;  
the default setting is tone dialing. Set the dialing mode to match the dialing  
system used by your local phone service.  
• If you are not sure of your dialing system, set the unit to tone dialing.  
Make a trial call. If the call connects, leave the setting as is; otherwise set  
the unit to pulse dialing.  
• If your phone system requires pulse dialing and you need to send DTMF  
tones in certain situations during a call, you can switch over to tone dialing  
(refer to "Tone Dialing Switch-over" on page E29).  
1
2
3
Press the MENU soft key. Select the Global Setup  
menu, and then the Dial Mode submenu.  
Dial Mode  
Tone  
Pulse  
BACK  
DELETE  
OK  
Press VOL/L or VOL/M to select Toneor Pulse  
(the initial setting is Tone).  
Press the OK soft key. You will hear a confirmation tone.  
E22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 23  
THE INTERFACE  
USING  
Setting Voice Mail Tone  
Voice Mail Tone sets the voice mail tone. If your service does not support SDT  
message signal, set your VMWI (Visual Message Waiting Indicator) not to  
detect SDT message signal.  
1
2
3
Press MENU soft key. Select the Global Setup menu,  
and then the Voice Mail Tone Submenu.  
Voice Mail Tone  
On  
Off  
DELETE  
BACK  
OK  
Press VOL/L or VOL/M to set the voice message  
indication (SDT message signal) to Onor Off  
.
Press the OK soft key. You will hear a confirmation tone.  
De-register the Handset  
Deregister HS clears the handset's ID from the main base unit or the base ID  
from the handset. You will usually only deregister the handset if you are  
having a problem with your phone or if you need to change the digital  
security code. (see page E49).  
Deregister HS?  
1
2
In standby mode, select Deregister HS in the menu  
and press the OK soft key.  
Deregister HS?appears.  
Yes  
No  
BACK  
DELETE  
OK  
Press VOL/L to select Yesand then the OK soft key.  
When de-registration is complete you will hear a confirmation tone,  
and Deregistration Completeappears.  
3
After de-registering the handset, place the handset to the base to register.  
You must re-register the handset before you can use it.  
E23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 24  
BASICS  
Making and Receiving Calls  
With the handset's duplex speakerphone, you can have  
hands-free conversations.  
Talk  
0:00  
MENU  
The  
icon appears on the display screen during  
MUTE  
hands-free conversations.  
4
GHI  
6MNO  
9WXYZ  
5
8
0
JKL  
TUV  
OPER  
You can easily switch a call from normal conversation  
to hands-free conversation. To switch a call, press  
SPEAKER during the call.  
7PQRS  
TONE  
INTCM  
/HOLD  
SPEAKER  
Note:  
• For best performance talk alternately with the caller in a quiet room. You can decrease  
the speaker volume if you or the other party has difficulty hearing.  
E24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 25  
BASICS  
From the Handset  
Normal Conversation  
Hands-free Conversation  
Handset On the Cradle  
Pick up the handset  
Handset Off the Cradle  
Press SPEAKER.  
(Automatic Talk is: on) or  
pick up the handset and  
press TALK/FLASH  
(Automatic Talk is: off).  
Handset Off the Cradle  
Press any number key,  
/TONE/ , or #/ (When  
Anykey Answer is on), or  
press TALK/FLASH.  
To answer a  
call  
Handset Off the Cradle  
1) Press TALK/FLASH.  
2) Listen for the dial tone.  
3) Dial the number.  
Handset Off the Cradle  
1) Press SPEAKER.  
2) Listen for the dial tone.  
3) Dial the number.  
To make a  
call  
OR  
OR  
Dial the number, and then  
Dial the number, and then  
press TALK/FLASH.  
press SPEAKER.  
To hang up Press END or return the handset to the cradle.  
To enter a  
When you dial the number in standby mode, press the PAUSE  
pause within  
the dialing  
sequence  
soft key.  
P
appears in the display, which represents a pause.  
Notes:  
• To set "Auto Talk", see page E18 or to set "Anykey Answer", see page E18.  
• The handset microphone is located at the bottom of the handset (see "Controls and  
Functions" on page E2). Position yourself as near to the handset as possible and speak  
clearly.  
• If the line is in use by another handset(s), "Line In Use" appears in the display of all  
registered handsets that are not in use.  
E25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 26  
BASICS  
Call Waiting  
If you have Call Waiting service and a call waiting tone  
sounds while you are on a call, press TALK/FLASH on  
the handset to accept the waiting call. There is a short  
pause, and then you will hear the new caller.  
END  
TALK  
FLASH  
VOL  
CID  
DEF  
1
4
3
ABC  
2
To return to the original caller, press TALK/FLASH again.  
GHI  
6MNO  
5
JKL  
Note:  
• You must subscribe through your local telephone company to receive Call Waiting or  
Caller ID on call waiting service.  
Placing a Call on Hold  
You can place a call on hold for 5 minutes. When 5 minutes has passed, the  
call is disconnected, and the phone returns to standby mode.  
1
During a call, press INTCM/HOLD. The call will be  
put on hold.  
Hold,to transfer  
Handset #2  
Handset #3  
DELETE  
BACK  
OK  
Tip:  
• If you leave a call on hold for more than 10 seconds, the display screen will read,  
Line On Hold  
.
2
To talk to the caller, press TALK/FLASH or SPEAKER on a handset.  
The phone will return back to the call.  
Note:  
• While a call is on hold, CIDCW can not be received.  
E26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 27  
BASICS  
Redialing a Call  
The last three phone numbers dialed can be quickly redialed from the handset.  
Redial numbers stored in the handset are independent from each other.  
<Redial1>  
1
2
3
4
With the phone in standby mode, press the REDIAL  
soft key.  
8007303456  
BACK DELETE STORE  
VOL/L or VOL/ M  
Press VOL/L or VOL/M to scroll through the last  
three dialed numbers.  
<Redial2>  
2145452930  
BACK DELETE STORE  
Press TALK/FLASH or SPEAKER on the handset.  
The selected number is dialed.  
VOL/L or VOL/ M  
<Redial3>  
8175551212  
To hang up, press END.  
BACK DELETE STORE  
Deleting a Redial Record  
Delete Redial1?  
Yes  
1
With the phone in standby mode, press the REDIAL  
soft key.  
No  
BACK  
BACK  
OK  
2
3
4
5
Press VOL/L or VOL/M repeatedly to display the number to be deleted.  
Press the DELETE soft key.  
Press VOL/L or VOL/M to choose Yes  
.
Press the OK soft key. The redialed number is deleted.  
Storing a Redial Record  
1
2
3
4
With the phone in standby mode, press the REDIAL soft key.  
Press VOL/L or VOL/M repeatedly to display the number to be stored.  
Press the STORE key. Store/Edit Nameappears.  
To complete the setting, follow the steps 3-8 in "Phonebook (Storing  
Phone Numbers, Names, Distinctive Rings, and Speed dial)" on page E31.  
Notes:  
• If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.  
• If the redial memory is empty, you will hear a beep.  
E27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 28  
BASICS  
Adjusting the Ringer, and Earpiece and Speaker Volume  
Ringer Volume  
END  
TALK  
FLASH  
VOL  
CID  
In standby mode, press the volume up key or volume  
down key on the handset to select one of three ringer  
volumes (Off, Low, or High).  
DEF  
1
4
3
ABC  
JKL  
2
5
GHI  
6MNO  
Earpiece and Speaker Volume  
You can select from among six volume levels on the handset. Pressing the  
volume up key or volume down key during a call will change the earpiece or  
speaker volume. This setting will remain in effect after the telephone call has  
ended.  
If you press the volume up key when the earpiece is at the maximum volume  
level, an error tone sounds.  
The error tone also sounds if you press the volume down key at the lowest  
volume.  
Temporarily Muting the Ringer  
You can mute the ringer individually on a handset. When the phone is ringing,  
pressing the MUTE soft key on the handset you want to mute. This mute will  
last for the current incoming call only. The ringer tone will return to the  
previous setting on the next incoming call.  
Note:  
• While charging a handset, you cannot mute the ringer tone for the handset.  
Mute Microphone  
You can temporarily mute the microphone so that the  
caller cannot hear you. Press the MUTE soft key during  
Talk  
Mute On  
talk mode (while the phone is in use) to mute the  
MUTE  
PRIVACY  
microphone. Mute Onand  
To cancel muting, press the MUTE soft key again.  
Mute Offappears and disappears from the display.  
appear in the display.  
E28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 29  
BASICS  
Tone Dialing Switch-over  
If your telephone company requires pulse dialing, you  
can switch-over to tone dialing after the call connects.  
This feature is useful when you need tone dialing to  
use any automated menu systems, such as telephone  
bank tellers, telephone prescription refills, customer  
support menus, etc.  
DEF  
3
1
4
ABC  
JKL  
2
5
8
0
GHI  
6MNO  
9WXYZ  
7PQRS  
TUV  
OPER  
TONE  
INTCM  
/HOLD  
SPEAKER  
If your phone is set to pulse dialing mode, make your call normally.  
Once your call connects, press the /TONE/ key. Any digits you enter from  
then on will be sent as tone digits. When this particular call ends, the phone  
automatically returns to pulse dialing mode.  
Traveling Out of Range  
During a call, as you begin to move your handset too far from your base unit,  
noise may increase. If you pass the range limits of the base unit, you will hear  
a beep and see Out of Rangeon the display, and then the handset returns to  
standby mode.  
Privacy Mode  
Privacy prevents interruption from other registered  
handsets. This works only when the phone is in use.  
Talk  
Privacy Mode On  
MUTE  
PRIVACY  
Press the PRIVACY soft key on the handset during talk  
mode.  
Privacy Mode Onand  
appear in the display. To exit the Privacy Mode,  
press the PRIVACY soft key again when the Privacy Mode is on.  
Privacy Mode Off appears.  
E29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 30  
BASICS  
Using One Touch Voice Mail Access  
If you subscribe to voice mail service, you can use your phone to access your  
voice mailbox. The new message LED flashes whenever you have messages  
waiting in your voice mailbox.  
Just program the handset with your access number, and you can get your  
messages at the touch of a button on the handset. (The voice mail service  
provider will supply you with the access number. This number may be simply  
a phone number. Refer to the provider's literature.)  
To program or delete your Voice Mail Access Number, see page E17.  
Dialing your Voice Mail Service  
Once you've programmed your personal access number, you can dial your  
mailbox with the touch of a button. When you have messages, simply press  
the  
soft key. If you have not entered the access number or it has been  
soft key, No Number Stored To store  
deleted, when you press the  
number press [MENU]appears and you will hear a beep. The phone returns  
to standby mode.  
Resetting the New Message LED  
The LED flashes when you have new messages in the voice mail service.  
If the LED remains on after you've retrieved your messages, you may need to  
reset the indicators. With the phone in standby mode, press and hold PAGE on  
the base until the paging sound stops (about 5 seconds).  
Note:  
• You must subscribe to voice mail service from your telephone company in order to use  
this feature. The voice mail service company will provide you with the access number.  
E30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 31  
DIRECTORY  
Phonebook (Storing Phone Numbers, Names,  
Distinctive Rings and Speed Dial)  
You can store names and numbers in your phone's phonebook, search for  
names alphabetically, and dial phonebook entries with just a few key presses.  
You can store up to 100 numbers in each registered handset.  
The phone uses the same memory locations to store phonebook entries and  
Caller ID messages. Empty phonebook locations are used to store Caller ID  
messages. For example, if you have stored 100 phonebook entries on your  
handset, the handset will not store Caller ID messages.  
1
When the phone is in standby mode, press  
The following items appear:  
.
(1st line) The number of the phonebook locations used  
(2nd line) How to search (press the number  
Phonebook :  
1
Search [A-Z/ / ]  
keypad, VOL/L or VOL/M)  
Store  
[STORE]  
(3rd line) How to store (press the STORE soft key)  
(4th line) The BACK, COPY, and STORE soft keys  
BACK  
COPY STORE  
2
3
Press the STORE soft key, Store/Edit Name  
appears.  
Store/Edit Name  
Movies  
BACK DELETE  
OK  
Enter the name (up to 16 characters) by using the number keypad  
(see the "Steps for Entering Names and Special Characters" on page E33).  
If a name is not required, go to step 4. <No Name> will be used as the  
name.  
Store/Edit No.  
8007303456  
4
5
Press the OK soft key to store the name;  
Store/Edit No. appears.  
DELETE PAUSE  
OK  
Use the number keypad,  
(up to 20 digits).  
/TONE/ , or #/  
to enter the phone number  
If you make an error, use the DELETE soft key to erase the incorrect digits.  
When you are finished, press the OK soft key to store the number.  
E31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 32  
DIRECTORY  
6
7
8
Distinctive Ringappears. Press VOL/L or VOL/M  
to move the pointer to one of the Distinctive Ring  
options and then press the OK soft key.  
Distinctive Ring  
No Selectn  
Flicker  
DELETE  
BACK  
OK  
Speed Dial  
Speed Dialappears. Press VOL/L or VOL/M to  
move the pointer to select the Speed dial location  
(10 locations: SPD1-SPD0).  
No Selectn  
SPD1:<Empty>  
DELETE  
BACK  
OK  
Movies  
Press the OK soft key. You will hear a confirmation  
tone, and Done!appears in the display.  
800-730-3456  
Beethoven9/SPD1  
BACK DELETE EDIT  
Notes:  
• When the memory is full, you will hear a beep and Memory Full appears. You cannot  
store names and numbers.  
• The pause key counts as one digit. Pressing the PAUSE soft key more than once  
increases the length of the pause between numbers. Each pause represents a 2 second  
delay.  
• If you choose not to store a Distinctive Ring, simply select the "No Selectn" option.  
• If you choose not to store the name/number as a Speed Dial, simply choose the  
"No Selectn" option.  
• Selecting a speed dial location where a number is already stored releases the old  
number's speed dial setting. The new number will be stored in the speed dial location.  
Chain Dialing  
The memory locations in the handset are not limited to phone numbers.  
You can also store a group of numbers (up to 20 digits) that you need to enter  
once your call connects. This is referred to as Chain Dialing.  
An example of this is a bank account number. Store the account number in  
one of the phonebook locations (refer to "Phonebook (Storing Phone  
Numbers, Names, Distinctive Rings and Speed Dial)" on page E31). When you  
call your bank and are prompted to enter the account number, scroll through  
your phonebook locations until you find your account number, and then press  
the DIAL soft key.  
E32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 33  
DIRECTORY  
Steps for Entering Names and Special Characters  
Refer to the letters on the number keys to select the desired characters.  
With each press of a number key (0-9), the displayed character appears in the  
following order: Upper case letters first, lower case letters next and finally the  
number corresponding to the key.  
Number of times key is pressed  
keys  
1
1
A
D
G
J
M
P
T
W
&
.
#
2
3
4
5
6
7
8
9
B
E
H
K
N
Q
U
X
(
,
0
C
F
I
L
O
R
V
Y
)
:
a
d
g
j
m
S
t
Z
<
?
b
e
h
k
n
p
u
w
>
!
c
f
i
l
o
q
v
x
/
@
2
3
4
5
6
r
8
y
s
z
7
9
_
*
(blank) -  
`
"
If you make a mistake while entering a name  
Use  
/TONE/  
or #/  
to move the cursor to the incorrect character.  
Press the DELETE soft key to erase the wrong character, and then enter the  
correct character. To delete all characters press and hold the DELETE soft key.  
E33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 34  
DIRECTORY  
For example, to enter Movies:  
1
When the phone is in standby mode, press  
Store/Edit Nameappears.  
and the STORE soft key.  
2
3
4
5
6
7
8
Press 6 once, and then press #/  
Press 6 six times.  
to move the cursor to the right.  
Press 8 six times.  
Press 4 six times.  
Press 3 five times.  
Press 7 eight times.  
When finished, press the OK soft key.  
To continue to store the telephone number, proceed to step 5 in "Phonebook  
(Storing Phone Numbers, Names, Distinctive Rings, and Speed dial)" on  
page E31.  
Note:  
• If the next character uses the same number key, you must press #/  
to move the  
cursor over. Otherwise the next time you press the number key, it changes the character  
that was previously set.  
E34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 35  
DIRECTORY  
Viewing the Phonebook  
Your phone stores names/numbers in the phonebook memory locations, and  
you can search names in alphabetical order. You can view the phonebook  
even while the phone is in use.  
1
2
Press  
. If you recall the phonebook during a call,  
Phonebook :100  
Search [A-Z/ / ]  
the COPY and STORE soft key will not appear.  
Store  
[STORE]  
BACK  
COPY STORE  
Press VOL/L or VOL/M, or the number keypad to scroll through the  
phonebook locations. Phonebook locations appear in alphabetical order  
(from first to last when you press VOL/M, from last to first when you  
press VOL/L).  
You can also use the letters on the number keys to select the first letter of  
the desired name. Press a number key (2-9 and 0) once for the first letter,  
twice for the second letter, and so on. The first location that begins with  
the letter you entered appears.  
For example, to search for Dentist, press 3 once. Press VOL/L or VOL/M,  
until the phonebook location is displayed.  
3
To finish the viewing operation, press END (or the BACK soft key or  
TALK/FLASH during a call).  
Note:  
• During a call, don't press END on the handset or the call will be disconnected.  
E35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 36  
DIRECTORY  
Making Calls Using the Phonebook  
From Standby Mode  
Movies  
1
When the phone is in standby mode, select the  
phonebook location to dial (see "Viewing the  
Phonebook" on page E35).  
800-730-3456  
Beethoven9/SPD1  
BACK DELETE EDIT  
2
3
Press TALK/FLASH or SPEAKER on the handset.  
The displayed number is dialed.  
To hang up press END.  
From Talk Mode  
1
2
Press TALK/FLASH or SPEAKER.  
View the phonebook location to dial (see "Viewing the Phonebook" on  
page E35).  
3
4
Press the DIAL soft key. The number in the displayed phonebook location  
is dialed.  
To hang up press END.  
Speed Dialing  
If you store a phone number in a speed dial memory location (10 locations:  
SPD1 - SPD0), you can use the speed dialing feature. When the phone is in  
standby mode, press and hold a number key (0-9) associated with the speed  
dial until the phone number appears, and then press TALK/FLASH or SPEAKER.  
The number stored in the speed dial (SPD1 - SPD0) is dialed.  
E36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 37  
DIRECTORY  
Editing or Erasing a Stored Name,  
Phone Number, Distinctive Ring and Speed Dial  
1
2
When the phone is in standby mode, press  
.
Phonebook :100  
Search [A-Z/ / ]  
Store  
[STORE]  
Press VOL/L, VOL/M, or the number keypad to  
select the phonebook locations (see "Viewing the  
BACK  
COPY STORE  
Phonebook" on page E35).  
a. Editing the Stored Data  
Store/Edit Name  
SANYO  
1
2
3
When the phonebook location to be edited  
appears, press the EDIT soft key.  
Store/Edit Nameappears.  
BACK DELETE  
OK  
Follow the steps 3 to 7 under "Phonebook (Storing Phone Numbers,  
Names, Distinctive Rings, and Speed Dial)" on page E31 to complete the  
editing operation.  
Press the OK soft key. You will hear a confirmation tone.  
b. Deleting the Stored Data  
Delete Memory?  
1
When the phonebook location to be deleted  
appears, press the DELETE soft key.  
Delete Memory?appears.  
Yes  
No  
BACK  
BACK  
OK  
2
3
Press VOL/L to move the pointer to Yes.  
Press the OK soft key. You hear a confirmation tone.  
Deleted!appears in the display.  
E37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 38  
DIRECTORY  
Copying Phonebook Locations (CLT-D5882/CLT-D5883)  
If you have two handsets, Copy Phonebook allows you to transfer stored  
phonebook locations from handset to handset so you don't have to manually  
re-enter names and numbers. You can transfer one memory (phonebook  
location) at a time, or all memory locations at once.  
1
2
3
When the phone is in standby mode, press  
.
Press the COPY soft key.  
To which unit?  
Handset #2  
Handset #3  
Press VOL/L or VOL/M, to select the handset you  
want transfer the phonebook locations and then  
press the OK soft key.  
DELETE  
BACK  
OK  
Copy Phonebook  
One Memory  
4
Press VOL/L or VOL/M to select One Memoryor All  
Memories:and then press the OK soft key.  
All Memories:xxx  
DELETE  
BACK  
OK  
If you select All Memories, Are you sure?appears  
on the display screen.  
Press VOL/L to select Yes, and then press the OK soft key.  
If you select One Memory, press VOL/L or VOL/M,  
or the number key (2-9 and 0) to select the  
phonebook location you want to export and then  
press the COPY soft key.  
To select  
phonebook  
press [A-Z/ / ]  
BACK  
5
The phonebook locations will be transferred to the  
handset. Copyingand the receiving handset name  
appear. When the transfer is completed Done!  
appears on the handset.  
Copying  
>> Handset #2  
CANCEL  
Notes:  
• If the memory location on the receiving handset is full, and cannot store the phonebook  
locations, you will hear a beep.  
• If an error occurs, the phonebook locations transferred before the error were stored in  
the receiving handset.  
E38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 39  
CALLER ID FEATURES  
Caller ID and CIDCW (Caller ID on Call Waiting)  
You must subscribe to Caller ID services through your local telephone  
provider to use these features.  
When the telephone rings, the Caller ID feature allows you to view the caller's  
name, phone number, date and time of call. With CIDCW (Caller ID on Call  
Waiting), you will hear a call waiting tone while you are on a call, and the  
Caller ID data is displayed. To accept the waiting call, press TALK/FLASH on the  
handset. Additionally, you can dial a number stored in the Caller ID list or  
save data to your Phonebook locations.  
Important:  
Memory locations for Caller ID messages and Phonebook locations (including  
Speed Dials) are common; you can store up to 100 locations for each handset.  
A Caller ID message is not stored when you have stored 100 of the  
phonebook locations. When you have stored 100 of the phonebook locations  
and Caller ID messages in total, the earliest Caller ID message is overwritten.  
The date and time received  
12/21 12:30PM  
Caller's name  
Jane Smith  
Caller's phone number  
214-555-1234  
BACK DELETE STORE  
1
2
When the Caller ID message is received, the display shows the caller's  
phone number along with the date and time. The incoming call  
information is stored in the Caller ID record. If the Caller ID service  
includes the caller's name, the name will appear in the display (up to  
15 characters).  
You may receive any one of the following messages:  
When invalid data is received;  
When a private name is received;  
When a private number is received;  
Incomplete Data  
Private Name  
Private Number  
When a unknown name is received; Unknown Name  
When a unknown number is received; Unknown Number  
When you pick up the phone, the display changes to Talk  
.
(Automatic Talk feature is set to on).  
E39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 40  
CALLER ID FEATURES  
Notes:  
• If you answer a call before the Caller ID message is received (for example, before the  
second ring), the Caller ID message will not appear.  
• When the call is received via a telephone company that does not offer Caller ID service,  
the caller's phone number and name does not appear. (This includes some international  
calls.)  
• When the call is via a private branch exchange (PBX), the caller's phone number and  
name may not appear.  
• The number of calls from the same Caller ID appears next to the received time. Once you  
view the new message, the number will be cleared and disappear.  
• Data errors appear as "❚."  
E40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 41  
CALLER ID FEATURES  
Viewing the Caller ID List  
You can view the Caller ID list through the handset during a call or when the  
phone is in standby mode.  
1
2
Press CID.  
Caller ID  
New : 50  
Total: 50  
BACK DELETE  
The summary screen appears. The screen shows  
the number of new messages and total messages.  
To view the Caller ID messages in historical order (from new to old or  
from old to new), repeatedly press VOL/M to scroll through the messages  
from the latest to the earliest, or VOL/L to scroll back through the  
messages.  
To view the Caller ID messages with alphabetical search, press the  
number key pad (2-9 and 0) with the letter associated with the first letter  
of the desired message.  
3
To finish the viewing operation, press END (or the BACK soft key or  
TALK/FLASH during a call).  
Notes:  
• Once you view the Caller ID list with alphabetical search, you cannot switch back to  
historical order (from new to old or from old to new) unless you exit and re-enter the  
operation.  
• During a call, do not press END on the handset or the call will be disconnected.  
E41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 42  
CALLER ID FEATURES  
Deleting a Caller ID Message  
Deleting Information from the Caller ID List  
1
When the phone is in standby mode, view the  
Caller ID information to be deleted (see "Viewing  
the Caller ID List" on page E41).  
Delete Caller ID  
Yes  
No  
BACK  
BACK  
OK  
2
3
4
Press the DELETE soft key. Delete Caller IDappears.  
Press VOL/L or VOL/M to choose Yes  
.
Press the OK soft key. You will hear a confirmation tone.  
Deleting all Caller ID names/numbers  
Caller ID  
New : 50  
Total: 50  
1
2
3
When the phone is in standby mode, press CID.  
BACK  
DELETE  
Press the DELETE soft key. Delete All?appears.  
Delete All?  
Press VOL/L to choose Yes  
.
Yes  
No  
BACK  
BACK  
OK  
Press the OK soft key. You will hear a confirmation tone.  
Note:  
• Once the Caller ID data has been deleted, the information cannot be retrieved.  
E42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 43  
CALLER ID FEATURES  
Using the Caller ID Message List  
Calling a party from the Caller ID list  
Standby Mode  
1
2
3
When the phone is in standby mode, select the  
Caller ID message (see "Viewing the Caller ID List"  
on page E41).  
12/21 12:30PM  
Jane Smith  
214-555-1234  
BACK DELETE STORE  
To have the phone dial a "1" before the displayed Caller ID number,  
press /TONE/ . To have the phone dial the stored area code before  
the displayed Caller ID number, press #/  
.
Press TALK/FLASH or SPEAKER. The displayed phone number dials  
automatically.  
Talk Mode  
1
2
When the phone is in talk mode, select the Caller ID message you want to  
dial (see "Viewing the Caller ID List" on page E41).  
Press the DIAL soft key, and the number will be dialed.  
Storing Caller ID messages in the Phonebook  
Messages shown in the Caller ID list can be stored in the phonebook.  
The phone number and name of the party on the Caller ID list can be stored  
in memory.  
1
When the phone is in standby mode, select the Caller ID message to be  
stored.  
Then press the STORE soft key. Store/Edit Nameappears. If the Caller ID  
message is already stored in memory, you will hear a beep and This  
data is already stored!!appears. The number will not be stored.  
2
To complete the setting, follow the steps 3-8 in "Phonebook (Storing  
Phone Numbers, Names, Distinctive Rings, and Speed dial)" on page E31.  
E43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 44  
CALLER ID FEATURES  
Notes:  
• When a long distance call has been set, "1" appears in the display.  
• If the Caller ID message was received as a private/unknown number, or the message  
does not have the number, you cannot store the message in the Phonebook. If it was  
received as private/unknown name, the message will be stored as <No Name>.  
• Even if the 100 memory locations are full, the message will be stored in the Phonebook.  
However, the message will be erased from the Caller ID list.  
E44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 45  
CALLER ID FEATURES  
Call Waiting Deluxe Features  
Your phone gives you new options for call waiting. At the touch of a button,  
you can place the caller on hold, send them to your voice mail service, or  
conference them into your current call. You must subscribe to Call Waiting  
and Call Waiting Deluxe to use these features. Not all features are available in  
all areas. Check with your local telephone company for details.  
1
2
When you receive a Call Waiting call, press the CWDX soft key for a list of  
options.  
Press VOL/L or VOL/M or the number keypad (1-7) to select an option.  
For example:  
press VOL/M 4 times  
press VOL/M 2 times  
1:Ask to Hold  
2:Tell Busy  
3:Forward Call  
BACK  
3:Forward Call  
5:Conference  
6:Drop First  
7:Drop Last  
4:Answer/Drop 1  
5:Conference  
BACK  
BACK  
BACK  
OK  
BACK  
OK  
BACK  
OK  
3
Press the OK soft key. A confirmation screen will appear, and the phone  
returns to the call.  
Your phone is pre-programmed with seven call waiting options. You can  
select to ask the calling party to hold, send them a busy message, forward  
them to your voice mail, or answer and drop the first caller. You can also  
select to conference them into the current call or, at any time, choose to drop  
the first or drop the last caller. Check with your local telephone company for a  
full list of options.  
Notes:  
• To activate features and display the CWDX soft key, select CW On/CWDX Onin the  
CIDCW option. See page E21.  
• You can also answer a waiting call immediately by pressing TALK/FLASH, the first caller  
will be placed on hold. To return to the original caller, press TALK/FLASH again.  
• If you don't press a key within 30 seconds while in the operation, the phone returns to  
the call.  
• To return to the call, press the BACK soft key.  
E45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 46  
MULTI-HANDSET FEATURES  
The features in this section require a minimum of two handsets to operate.  
Using the Walkie-Talkie Mode  
To use this feature, you must enter the handsets into Walkie-Talkie mode first.  
To enter Walkie-Talkie mode, see page E15.  
Walkie-Talkie call  
SUN 12:00A  
1
2
3
4
When the phone is in the Walkie-Talkie standby  
mode, press the DirectLink soft key (example of  
Walkie-Talkie from handset #1).  
Handset #1  
DirectLink Mode  
CANCEL  
DirectLink  
Select the handset to which you wish to Walkie-  
Talkie with by pressing the number keys (0-9).  
Your handset will then page the other handset.  
To DirectLink  
a handset  
press [1-9,0]  
BACK  
On the receiving handset, press TALK/FLASH, the  
ANSWER soft key, or if Anykey Answer is on, press  
DirectLink  
Handset #2  
any number key,  
/TONE/ , or #/  
.
END  
When you finish your conversation, press END or the END soft key on  
either handset. Return the handset to the cradle, or press the CANCEL soft  
key and then the OK soft key to return to normal standby mode  
(cancelling Walkie-Talkie mode).  
Notes:  
• Handsets can be in Walkie-Talkie mode while other handsets are in use.  
• While a handset is in a Walkie-talkie mode, it cannot be used to make or receive a call.  
Other handsets can still make or receive a call.  
E46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 47  
MULTI-HANDSET FEATURES  
3-Way Conferencing  
The phone permits 3-way conversations between 2 handsets and an outside line.  
1
2
3
4
Initiate the call normally. Once the call is in progress, other people can  
join the call.  
To join a conference call, press TALK/FLASH or SPEAKER on the other  
handset.  
To leave a conference call, simply hang up as you normally would.  
All other parties will remain connected.  
To end a conference call completely, all local parties must hang up.  
The conference call will also end when the calling party hang up.  
Note:  
• If the initial handset is in privacy mode, other handsets cannot join the call.  
Intercom/Call Transfer Feature  
If you have two or more handsets, you can use them as an intercom.  
Also, you can place an outside call on hold and transfer the call to another handset.  
Intercom  
1
2
In standby mode, press INTCM/HOLD.  
To intercom  
Handset  
Select the handset you want to talk with within 30  
seconds. To select the handset, press VOL/L or  
VOL/M, and then press the OK soft key. If you select  
#2  
#3  
Handset  
BACK  
DELETE  
OK  
All, all other handsets will be paged. An intercom tone sounds.  
To cancel intercom, press the CANCEL soft key on the initiating handset.  
3
4
To answer the page, press TALK/FLASH,  
INTCM/HOLD, or the ANSWER soft key. If Anykey  
Answer is enabled, pressing a number key,  
Intercom  
Handset #1  
ANSWER  
/TONE/ , or #/  
will answer the page.  
If Automatic Talk is enabled, you can answer the page by simply picking  
up the handset.  
To hang up the intercom call, press END or the END soft key on either handset.  
E47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 48  
MULTI-HANDSET FEATURES  
Call Transfer Feature  
1
2
During a call, press INTCM/HOLD on the handset.  
Select a handset to transfer the call to within  
10 seconds.  
Hold,to transfer  
Handset #2  
Handset #3  
To select the handset, press VOL/L or VOL/M,  
DELETE  
BACK  
OK  
and then press the OK soft key. If you select All  
,
all other handsets will be paged.  
The call will automatically be placed on hold, and an intercom tone  
sounds.  
To cancel the transfer, press the CANCEL soft key, and then TALK/FLASH or  
SPEAKER on the initiating handset.  
3
4
To answer the page on a receiving handset, press TALK/FLASH,  
INTCM/HOLD, or the ANSWER soft key. If Anykey Answer is enabled,  
pressing a number key,  
/TONE/ , or #/  
will answer the page.  
If Automatic Talk is enabled, you can answer the page by simply picking  
up the handset.  
To speak to the caller, press TALK/FLASH on the receiving handset.  
Notes:  
• If the party is busy or out of range, the handset returns to standby mode.  
• If you receive an outside/intercom call or page while selecting the other handset,  
the operation will be cancelled.  
• If the party does not answer within one minute, the operation is cancelled.  
Press TALK/FLASH or SPEAKER to return to the caller.  
• During an intercom call, if you receive a call, you will hear a ringer tone from the  
earpiece. Press TALK/FLASH on either handset to answer the call.  
E48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 49  
INFORMATION  
ADDITIONAL  
Changing the Digital Security Code  
The digital security code is an identification code used to connect the handset  
and the base unit. Normally, setting the code is not necessary. In the rare  
situation that you suspect another cordless telephone is using the same  
security code, you can change the code. To change the digital security code:  
1
2
In standby mode, select Deregister HSin the menu and press the  
OK soft key. Deregister HS?appears.  
Press VOL/L to select Yesand then the OK soft key.  
When de-registration is complete you will hear a confirmation tone,  
and Deregistration Completeappears.  
3
After de-registering the handset, place the handset to the base to register.  
You must re-register the handset before you can use it.  
Find Handset  
To locate the handset, press PAGE on the base when the phone is in standby  
mode. All registered handsets beep for 60 seconds, and Paging appears on  
the handset display. To cancel paging, press any key on the handset or PAGE  
on the base.  
Note:  
• If the battery pack is completely drained, the handset will not beep when paging.  
E49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 50  
INFORMATION  
ADDITIONAL  
Installing the Beltclip  
To attach the beltclip  
Insert the beltclip into the holes on each side of  
the handset. Press down until it clicks.  
To remove the beltclip  
Pull either side of the beltclip to release the tabs  
from the holes.  
Optional Headset  
Your phone can be used with an optional  
headset. To use this feature, insert the headset  
plug into the headset jack. Your phone is ready  
for hands-free conversations.  
E50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/25/06 7:12 PM Page 51  
INFORMATION  
ADDITIONAL  
Note on Power Sources  
Battery Replacement and Handling  
When the operating time becomes short even after a battery is recharged,  
please replace the battery.  
With normal usage, your battery should last about one year.  
Warning: To avoid the risk of personal injury or property damage from fire or  
electrical shock, only use the SANYO battery model and SANYO  
adapter model specifically designated for this product.  
RECYCLING NICKEL-METAL-HYDRIDE BATTERIES  
NICKEL-METAL-HYDRIDE BATTERIES MUST BE DISPOSED OF  
PROPERLY.  
Nickel-metal-hydride cells are used in the battery pack. Please take your used  
nickel-metal-hydride battery packs to a store that recycles nickel-metal-  
hydride batteries.  
Power Failure  
During the period that the power is off, you will not be able to make or  
receive calls with the telephone.  
Caution  
• Use only the specified SANYO battery pack.  
• Do not remove the battery from the handset to charge it.  
• Never throw the battery into a fire, disassemble it, or heat it.  
• Do not remove or damage the battery casing.  
E51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 52  
INFORMATION  
ADDITIONAL  
Troubleshooting  
If your phone is not performing to your expectations, please try these simple  
steps first.  
Symptom  
Suggestion  
The CHARGE LED • Make sure the AC adapter is plugged into the base or  
won't illuminate  
when the  
the charger (if you have more than one handset) and  
wall outlet.  
handset is  
placed in the  
cradle.  
• Make sure the handset is properly seated in the cradle.  
• Make sure the charging contacts on the handset are  
clean.  
The audio  
sounds weak.  
• Move the handset and/or base away from metal objects  
or appliances and try again.  
• Make sure that you are not too far from the base.  
Can't make or  
receive calls.  
• Check both ends of the base telephone line cord.  
• Make sure the AC adapter is plugged into the base and  
wall outlet.  
• Disconnect the AC adapter for a few minutes, and then  
reconnect it.  
• De-register the handset (see "De-register the Handset"  
on page E23).  
• Change the digital security code (see "Changing the  
Digital Security Code" on page E49).  
• Make sure that you are not too far from the base.  
• Make sure the line is not in use.  
• If an outside call is already established, you cannot  
make another outside call.  
The handset  
doesn't ring or  
receive a page.  
• Charge the batteries in the handset for 15-20 hours by  
placing the handset on the base or charging cradle.  
• Make sure that you are not too far from the base.  
• De-register the handset (see "De-register the Handset"  
on page E23).  
• Change the digital security code (see "Changing the  
Digital Security Code" on page E49).  
Unavailable  
appears in the  
display.  
• Make sure that another handset(s) is not in use, and try  
the phone again.  
• Make sure that you are not too far from the base.  
E52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 53  
INFORMATION  
ADDITIONAL  
Symptom  
Suggestion  
Severe noise  
interference.  
• Keep the handset away from microwave ovens,  
computers, remote control toys, wireless microphones,  
alarm systems, intercoms, room monitors, fluorescent  
lights, and electrical appliances.  
• Move to another location or turn off the source of  
interference.  
The Caller ID  
• The handset was picked up before the second ring.  
does not display. • The call was placed through a switchboard.  
• Call your local telephone company to verify your Caller  
ID service is current. There can be a problem with your  
Caller ID service.  
You cannot  
register the  
handset to the  
base.  
• Charge the battery pack for 15-20 hours.  
• De-register the handset (see "De-register the Handset"  
on page E23).  
• Change the digital security code (see "Changing the  
Digital Security Code" on page E49).  
The handset  
doesn't  
• De-register the handset (see "De-register the Handset"  
on page E23).  
communicate  
with other  
handsets.  
• Change the digital security code (see "Changing the  
Digital Security Code" on page E49).  
• Make sure that you have registered all handsets.  
The handset  
can't join the  
conversation.  
• Make sure there are not 2 handsets already using the  
3-way conference feature.  
• Make sure that another handset is not in privacy mode.  
Room Monitor  
feature does not  
work.  
• Make sure to place the handset(s) within the range of  
the base.  
E53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 54  
INFORMATION  
ADDITIONAL  
Technical Information  
IMPORTANT SAFETY INSTRUCTIONS  
When using your telephone equipment, basic safety precautions should always be followed to  
reduce the risk of fire, electric shock and injury to persons, including the following:  
1
2
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink  
or laundry tub, in a wet basement or near a swimming pool.  
Avoid using a telephone (other than a cordless type) during an electrical storm. There may  
be a remote risk of electric shock from lightning.  
3
4
Do not use the telephone to report a gas leak in the vicinity of the leak.  
Use only the power cord and batteries indicated in this manual. Do not dispose of  
batteries in a fire. They may explode. Check with local codes for possible special disposal  
instructions.  
SAVE THESE INSTRUCTIONS  
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries  
according to the instructions.  
I.C. Notice  
TERMINAL EQUIPMENT  
NOTICE:  
This equipment meets the applicable Industry Canada Terminal Equipment Technical  
Specifications. This is confirmed by the registration number. The abbreviation, IC, before the  
registration number signifies that registration was performed based on a Declaration of  
Conformity indicating that Industry Canada technical specifications were met. It does not imply  
that Industry Canada approved the equipment.  
NOTICE:  
The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment  
itself. The REN assigned to each terminal equipment provides an indication of the maximum  
number of terminals allowed to be connected to a telephone interface. The termination on an  
interface may consist of any combination of devices subject only to the requirement that the  
sum of the Ringer Equivalence Numbers of all the devices does not exceed five.  
RADIO EQUIPMENT  
The term “IC:” before the radio certification number only signifies that Industry Canada  
technical specifications were met.  
Operation is subject to the following two conditions: (1) this device may not cause interference,  
and (2) this device must accept any interference, including interference that may cause  
undesired operation of the device. “Privacy of communications may not be ensured when using  
this telephone”.  
E54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 55  
THE SANYO COMFORT WARRANTY  
WARRANTY APPLICATION  
MAINTENANCE necessary in respect of the  
product.  
SANYO Communications products purchased  
new, unused in Canada through a SANYO  
Authorized Dealer are warranted against  
manufacturing defects in materials and  
workmanship for ONE YEAR covering parts  
and labour, from the date of purchase by the  
original retail purchaser. This warranty only  
applies in favour of the original retail  
purchaser of the warranted product.  
WARRANTY BECOMES VOID  
This warranty becomes void if the product’s  
serial numbers are altered or removed or if  
any repair to the product is made other than  
by SANYO Canada Inc. or by an authorized  
SANYO Service Depot.  
LIMITATIONS  
(a). SANYO Canada Inc. reserves the right to  
change or improve the design of the  
model of the product warranted  
hereunder without incurring any  
obligation to make any modifications to  
or to install any improvement in or on the  
product.  
(b). In no event shall SANYO Canada Inc. or  
any of its Authorized Dealers be liable for  
special or consequential damage arising  
from the use of this product.  
SANYO CANADA INC.’S RESPONSIBILITY  
During the warranty period, SANYO Canada  
Inc. will repair, or at our option, replace a  
Communications product which shows  
evidence of a manufacturing defect in  
materials or workmanship. Replacement  
PARTS are warranted for the remaining  
portion of the warranty period.  
WHAT IS NOT COVERED  
(a) Communications products purchased  
outside Canada.  
(b) Communications products purchased in a  
used condition.  
STATUTORY WARRANTIES  
The above provisions do not preclude the  
operation of any applicable provincial statute  
which in certain circumstances may not allow  
some of the limitations and exclusions  
described in this Warranty. Where any terms  
of this Warranty are prohibited by such a  
statute, they shall be deemed null and void  
but the remainder of this warranty shall  
remain in effect.  
(c) Communications products purchased  
from non SANYO-authorized dealer.  
(d) Communications products not intended  
for Canadian usage or products without  
appropriate Canadian regulatory  
approvals.  
(e) Problems due to product set-up and  
installation.  
(f) Adjustments that are outlined in the  
Operating Manual.  
(g) Accessory items including antenna, and  
batteries,  
(h) Damage in or due to transportation.  
(i) Damage due to improper maintenance,  
accident, abuse, misuse or negligence.  
(j) Damage caused by lightning and power  
surges.  
HOW TO OBTAIN WARRANTY SERVICE  
Please contact the SANYO Authorized Dealer  
from whom the product was purchased, or  
contact us directly at:  
SANYO Canada Inc.  
1-300 Applewood Cres.  
Concord, Ont. L4K 5C7  
(905) 760-9944  
ORIGINAL RETAIL PURCHASER’S  
RESPONSIBILITY  
1-800-263-2244  
You, the original retail purchaser, must present  
your original, dated bill-of-sale together with  
this warranty to SANYO Canada Inc. or to an  
authorized SANYO Service Depot when you  
make a claim under this warranty.  
You, the original retail purchaser, are  
responsible for any costs of TRANSPORTING  
the product to and from SANYO Canada Inc.  
or an authorized SANYO Service Depot. You  
also are responsible for the cost of any  
E55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 56  
SOS HELP LINE  
At SANYO, fulfilling the needs of our customers is a priority.  
That’s why we created our SOS customer service program that  
guarantees satisfaction.  
NATIONWIDE CUSTOMER SUPPORT  
SOS is there to help you. Our friendly and knowledgeable product  
specialists will quickly answer your questions about setup and use  
of SANYO telephone products. Simply call toll free from  
anywhere in Canada to connect to our no-charge, SOS support  
and service network:  
1-800-263-2244  
Or visit our website at www.sanyoservice.com, and click the  
Customer Relations button to get access to our FAQ’s (Frequently  
Asked Questions) and other helpful features.  
STAY-AT-HOME CONVENIENCE  
It’s a nuisance making another trip to the store when you’re stuck.  
Now with SOS, all that’s necessary is a quick call from your home  
for product assistance.  
HASSLE-FREE EXCHANGE  
Should your SANYO telephone require servicing due to a  
manufacturing defect during the warranty period, SANYO Canada  
will ship prepaid a replacement unit* within two business days  
after receiving your defective unit. Consumers are responsible for  
the shipping costs of the unit back to SANYO.  
• For older, non-current models, replacement units may not be available, in  
which case our regular warranty conditions will apply.  
GUARANTEED QUALITY  
All SOS replacement sets are checked and serviced by factory-  
authorized technicians before being sent out.  
SOS means you never have to worry.  
C.O.D. and/or Collect shipments will not be accepted.  
Unit must be returned to SANYO in its original box with all  
accessories, i.e.: owner’s manual, battery, adaptor, telephone cord,  
etc.  
E56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 57  
Main Menu Flow Chart  
SUN 12:00A  
Handset #1  
New CID:  
MENU  
5
REDIAL  
MENU  
DirectLink Mode  
Room Monitor  
To enter  
SUN 12:00A  
Handset #1  
DirectLink mode  
press [ENTER]  
OK  
ENTER  
Handset Setup  
DirectLink Mode  
BACK  
BACK  
OK  
BACK  
BACK  
ENTER  
CANCEL  
DirectLink  
DirectLink Mode  
Room Monitor  
To Room Monitor  
Handset  
Handset  
Handset  
Handset  
Handset  
Handset  
Handset  
Handset  
Handset  
Base  
#2  
#3  
#4  
#5  
#6  
#7  
#8  
#9  
#0  
or  
Handset Setup  
BACK  
OK  
BACK  
OK  
BACK  
BACK  
OK  
DirectLink Mode  
Room Monitor  
<HANDSET SETUP>  
Edit Voice Mail  
Ringer Tones  
Distinctive Ring  
Auto Talk  
or  
Handset Setup  
BACK  
OK  
BACK  
OK  
Anykey Answer  
Banner  
Language  
Contrast  
Key Touch Tone  
Animation Screen  
BACK  
BACK  
OK  
Room Monitor  
Handset Setup  
Global Setup  
<GLOBAL SETUP>  
Day & Time  
CIDCW  
or  
or  
OK  
BACK  
BACK  
OK  
Area Code  
Dial Mode  
Voice Mail Tone  
BACK  
BACK  
OK  
Handset Setup  
Global Setup  
Deregister HS  
Deregister HS?  
Yes  
No  
Deregistration  
Complete  
OK  
OK  
BACK  
BACK  
OK  
BACK  
BACK  
OK  
Place handset  
on main base  
to register  
E57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 58  
May be covered under one or more of the following U.S. patents:  
4,797,916  
5,533,010  
5,663,981  
5,758,289  
5,864,619  
5,960,358  
6,314,278  
6,788,920  
6,914,940  
5,381,460 5,426,690 5,434,905 5,491,745 5,493,605  
5,574,727 5,581,598 5,650,790 5,660,269 5,661,780  
5,671,248 5,696,471 5,717,312 5,732,355 5,754,407  
5,768,345 5,787,356 5,794,152 5,801,466 5,825,161  
5,893,034 5,912,968 5,915,227 5,929,598 5,930,720  
5,987,330 6,044,281 6,070,082 6,125,277 6,253,088  
6,418,209 6,618,015 6,671,315 6,714,630 6,782,098  
6,788,953 6,839,550 6,889,184 6,901,271 6,907,094  
SANYO Canada Inc.  
UPZZ01800DZ(0)  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radica Games Games I5009 User Guide
RCA MP3 Player SL5004 User Guide
RCA Portable Speaker PRO X33AV User Guide
Realistic Welding System 20 113 User Guide
Samsung Air Conditioner AXHM260VE User Guide
Samsung All in One Printer 4828FN User Guide
Samsung Bread Maker SGH X520 User Guide
Samsung Digital Camera AD68 05528A User Guide
Sanus Systems TV Mount SF203 User Guide
Sears Air Compressor 919150280 User Guide