USER' S MANUAL
Base
n Last Number Redial
n Charging Handset
MENU/R
C/
MENU/R
C/
Digital Cordless Telephone
1. Press the
key in standby mode.
Use Redial Book options
!
Important Note: Before initial operation, YOU SHOULD FULLY
CHARGE THE HANDSET for about 15 hours.
Result: The LCD displays the last number you
Using the redial book options, you can add a
number to phone book or delete a number in
the redial book.
MODEL NO. CLT-3602
dialed.
To charge the handset, you should place it on the base or charger.
2. Press the
key to dial out the number.
Result: When you place the handset on the base or charger, the
1. Press the
key.
handset automatically turns on.
Your phone allows you to retrieve the last 10
numbers you have dialed and recall them
quickly.
2. Scroll to the desired number by using the
or key.
Phone
Line Jack
Power Jack
Charge pins
n Turning Handset On/Off
3. When the number appears on the display,
MENU/R
Search for and dial
Redial Book
a
number in
press the
option:
key to choose the desired
If the handset is in power off mode, when you
place the handset on the base or charger, it
automatically turns on. To turn the handset
on or off in standby mode, follow these steps:
If the handset is successful in finding a base, the
handset will enter the standby mode, the display
will show handset number or the handset name
(if you have one saved as described on par. HS
Name), signal icon, battery icon and current
time. If the handset is unsuccessful in finding a
base, the handset will behave according to the
Out of Range condition.
ADD TO PB: allows you to add the number to the
1. Press the
key in standby mode.
Page button
phone book. Complete storing the entry by starting
from step
4
described in par."Adding the Phone
2. If you want to scroll through the memory,
press or key repeatedly until you
find out the number you want to dial.
1. To turn on the handset when it's off, press
Book Entries" (obviously, you will find the number
already entered in the appropriate field).
DELETE: allows you to delete the selected number.
DELETE ALL: allows you to delete the whole redial
book.
and hold the
key until you switch the
Charger
display on. On power up, the handset will
enter subscription mode and search for a
3. Press the
key to dial out the number.
n Keys Description
registered base.
A
message as shown
Note:
C/
below will be displayed to the user, and the
signal icon will flash.
4. To exit, press the
key.
When battery power is very low, if you
place the handset on the base, the display
will show as below. YOU SHOULD FULLY
CHARGE THE HANDSET BEFORE USING.
Notes:
Dial/Speaker key
Make/Answer a call.
Activates the speakerphone if pressed during a call.
If no numbers are found, "EMPTY" is
displayed.
Note:
At step 3, when you select DELETE or
DELETE ALL options, message
When the redial book is full, each time you
dial a new number, the oldest number stored
in the redial book is automatically erased.
searching
a
End/Power key
End a call.
"CONFIRM ?" will further ask you to
MENU/R
confirm the deletion. To confirm press
2. To turn off the handset, keep the
pressed until the display disappears.
key
Long press to activate power on/off, as described in par. Turning Handset
On/Off.
n Congratulations
----
C/
Key, to escape press the
Kk
key.
on purchasing our high quality product.
Navigation key:
Please read the manual carefully to find out all features and how your telephone works, so you can get
the best out of your new phone.
n CID Book
Up/CID key
Scroll up through lists and menu options.
Increase the earpiece/speakerphone volume during a call.
Enter the CID book, as described in par. CID Book.
MENU/R
When you receive
a
call, if the caller's
4. Press the
the name.
key, you are prompted to enter
Basic Functions
information is transmitted from the network on
which the call was made (and the caller doesn't
hide it), the caller's phone number is displayed.
Moreover, if you missed one or more calls, the
icon will appear on the LCD. If the CID
n Safety Precautions
MENU/R
5. Enter the name and press the
key, then you
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
Down/Phonebook key
can modify the number you want to store.
To reduce the risk of electrical shock and injury, please follow these basic safety precautions before
using the phone.
Scroll down through lists and menu options.
Decrease the earpiece/speakerphone volume during a call.
Enter the Phonebook, as described in par. Phone Book.
standby mode by pressing the
key.
MENU/R
6. Press the
key, you are able to select the
memory is full, the
icon will flash on the LCD.
1. Carefully read and observe the instructions in this manual.
2. Follow all warnings marked on the unit.
ring tone from Melody 1 to Melody 10, press
MENU/R
n Making a Call
OUT OF AREA - This message will display when
someone calls from an area where the telephone
company is not offering the caller identification
services or is not yet providing number delivery
to your area.
the
key to confirm and exit, you will hear a
INT key
confirm beep.
Set up an internal call to another handset.
Transfer an incoming call to another handset.
Set up a conference call with an external line and an internal handset.
3. When cleaning, unplug the phone first, then use a damp cloth to wipe. Do not use liquid or aerosol
cleaners.
You can enter the desired phone number in
standby mode, which allows you to make
corrections before dialing. Follow these steps:
1. Pick up the handset and press the
key.
Delete a number in the CID Book
4. Do not place objects on the line cord that may cause damage.
Result: The icon appears on the LCD.
MENU/R
1. Press the
key.
Redial key
5. Do not use this phone in wet surroundings or environments where there is a risk of explosion.
6. Avoid spilling of any liquid on the phone.
1. Enter a telephone number (up to 32 digits).
PRIVATE - If the caller has exercised the option
to prevent his name and number from being sent,
the message will show on the LCD.
2. Dial a telephone number.
Enter the redial book, as described in par. Last Number Redial.
Insert a pause when pre-dialing a number.
MENU/R
2. Press the
key again to choose CID BOOK,
Check it. You can also use the
insert a pause.
key to
and if available, the numbers are displayed.
3. To end the call, either press the
or replace the handset on the base.
key
7. Unplug this phone from the wall outlet and refer servicing to qualified service personnel only.
Menu/OK key (left)
3. Scroll to the number you want to delete by
8. Pay attention to the polarity of the batteries, insert the rechargeable batteries in accordance with
polarity symbols (this instruction is found in the installing batteries section.)
View and dial any of the CID numbers
Note:
MENU/R
Enter the menu functions in standby mode.
Confirm selections & actions.
Performs "Flash" function.
using
or
key.
If you make
a
mistake while entering
C/
a
Note:
MENU/R
1. Press the
key.
9. Use only the batteries indicated in the User's Manual. Never use other ordinary batteries or
conventional alkaline batteries. Otherwise this may not only cause personal injuries but also damage
to the unit.
number, press the
digit.
key to clear the last
To make a call to the last number you dialed,
use the Redial feature. For details, see par.
Last Number Redial.
4. When the desired number appears on the
MENU/R
MENU/R
display, press the
key.
2. Press the
key again to choose the CID
Cancel/Mute key (right)
BOOK, and if available, the numbers are
Return to the previous menu.
Enter to mute during a call.
Delete an incorrect character/digit.
C/
displayed. (You can also access the CID book
10. Do not mix exhausted batteries with full batteries. Exhausted batteries shall not be disposed of with
the usual household waste or in a fire.
2. When the number appears correctly, press
the key.
5. Use
the
or
key to choose DELETE, press
directly by pressing the
mode.)
key in standby
MENU/R
key. The display will show "CONFIRM
MENU/R
?". Press the
key to confirm, you will hear a
11. If you are sure you will not be going to use the handset over a month, please take out the batteries
from the battery compartment.
key
beep and the LCD shows the next number.
n Receiving a Call
3. Use
or
key to view the numbers, you
key. You
Press and hold to turn on/off keypad lock function.
Set up a conference call, as described in par. Calling with more than one
Handset.
can make a call by a press of the
12. Use only the power supply indicated in the User's Manual.
13. Keep the phone out of the reach of children.
can also add the entry to the phonebook.
Delete all numbers in the CID Book
When a new call is received, the call information
will appear.
Result: After you hang up, the LCD displays
the call duration.
MENU/R
1. Press the
key.
Add CID Number to Phone Book
14. Use the phone only in the described manner.
15. Stop using the phone if it becomes damaged.
If the caller can be identified, the caller's phone
number is displayed.
MENU/R
2. Press the
key again to choose CID BOOK,
Notes:
MENU/R
n LCD Window Icons Description
1. Press the
2. Press the
key.
and if available, the numbers are displayed.
You can select the ringer volume by using
MENU/R
MENU/R
key again to choose the CID
or
key when the phone rings with
1. To answer the call, press the
key. If you
3. Press the
key and use
or
key to
n Unpacking
New Call
Signal Icon
BOOK, and if available, the numbers are
an incoming call.
have activated the Auto Answer function,
when the handset is on the base, simply lift it
up to answer.
choose DELETE ALL menu, then press the
MENU/R
key.
Indicates you have missed one
or more calls.
Indicates whether the current
signal exists or not. If the
handset is too far from the base,
this icon will blink on the LCD.
displayed.
Once you have unpacked your phone, make sure that all the parts shown below are available. If any
pieces are missing or broken, please promptly call your dealer.
If the polyphonic ring tone is set, the ring
tone may continue for 4 seconds after the
caller's hang-up or after the parallel phone
had answered the call.
3. Use
or
key to view the numbers. When
4. The display shows "CONFIRM ?", press the
MENU/R
key to confirm.
the desired number displays on the LCD, press
MENU/R
2. To end the call, either press the
replace the handset on the base.
key or
Off Hook
the
key to enter ADD TO PB menu.
Indicates the line is engaged.
Result: You hear
a
beep and the phone
MENU/R
C/
Keypad Lock
returns to the standby mode after
clearing all the CID numbers.
Hands-free
This icon appears when the
keypad is locked.
n Muting the Microphone
Indicates the handsfree function
is enabled.
n Key Lock
C/
During a conversation, you can temporarily switch
your phone's microphone off, so that the other
party cannot hear you.
To mute your microphone, press the
during the conversation. The "CALL MUTED"
appears on the LCD.
key
If you turn on this feature, all keys will be locked.
To unlock the keys, keep the
key pressed again
Base
Charger
2 Handsets
User's manual
You can answer calls by using the
key. But
till the key lock icon
disappears from the display.
Battery Icon
when you hang up, the phone returns to the
locked mode. This feature is useful to avoid
pressing keys by mistake.
Indicates battery charge level.
Warranty card
C/
To unmute the microphone, press the
key
Example: You want to say something to another
person in the room but do not want
the other party to hear you.
Note:
again. You will restore the normal condition.
In locked mode, if you press any key, the
phone will generate a warning tone, and the
"HS LOCKED" message will be redisplayed.
n Connecting Lines
To lock the keys, in the standby mode just keep
4 AAA Ni-MH
batteries
2 Adapters*
Line cord*
Warranty card
the
key pressed till the display shows "HS
icon.
To AC wall
outlet
1. Connect one end of the phone line cord to the phone
LOCKED" and the
line jack of the base, and the other end to
standard phone wall outlet.
a
n Adjusting Audio Volume
*The shape of the plugs can vary according to each country’s specification.
During a conversation, you can use the
or
You can also select the earpiece volume or the
speaker volume by the AUDIO SETUP in Menu
under HS SETTING, as described in par. HS
Settings.
n Selecting a Language
2. Connect the modular ends of the AC power adapters
to the power jack of the base and charger, then plug
the AC adapter into standard AC wall outlets.
To phone wall outlet
key to adjust the level of the earpiece (or
the handsfree speakerphone one, if activated)
volume from VOL1 to VOL5. The selected
volume will be displayed on the LCD.
n Phone Layout and Keys Function
The handset supports multiple predefined
languages. You can change the language used
to display the menu messages.
3. Use
or
key to choose the LANGUAGE,
To AC wall
outlet
MENU/R
then press the
key.
Handset
4. The languages will be displayed. Use
or
n Installing Batteries
MENU/R
1. Press the
2. Press
key.
key repeatedly to choose HS
key to scroll through the options. Each
language will be displayed in its own native
translation.
Earpiece
n Ringer Setting
The rechargeable Ni-MH batteries (AAA size) come with
your phone. Install the battery before using your
phone.
or
MENU/R
SETTING, press the
key.
You can select your own external (from the
telephone Network) or internal (from other
handsets registered to the same base) ring tone
and adjust the volume.
5. Press
or
key to choose MELODY or
MENU/R
5. Press the
key to select the required
MENU/R
Menu/OK key
Display
VOLUME, press the
key.
language and you will hear a confirm beep.
Up/CID key
1. Slide the battery cover in the direction of the
arrow and pull it out.
Result: You can select the ring tone from
Melody 1 to 10 or adjust the volume
from Volume 1 to 5, or off. When you
adjust the ring tone or volume, the
phone plays the selected melody or
sounds the selected loudness.
Speaker
Cancel/Mute key
Right/Redial key
MENU/R
C/
n HS Name
Left/Int key
MENU/R
1. Press the
key.
"HS N" is the default name of the handset after
registration of handset. The handset number N=
1 to 5 reflects the handset is the Nth handset,
which is registered to the base. The HS Label is
displayed in the standby mode. You can modify it
by the following steps:
3. Use
or
key to choose HS LABEL, then
key.
2. Insert new batteries as indicated, matching
correct polarity (+,-).
Down
MENU/R
press the
/Phonebook key
Dial/Speaker key
Notes:
2. Press
or
key repeatedly to choose HS
Battery
compartment
cover
MENU/R
Reversing the orientation may damage
the handset.
SETTING menu, then press the
key.
End key
key
4. You can enter the handset name (up to
6
3. To replace the battery
cover, slide the cover up
until it snaps in place.
Alphanumeric
keys
characters) by using the alphanumeric keys
3. Press
or
key to choose RING SETUP,
MENU/R
The batteries need to be replaced if
they do not recover their full storage
capacities after recharging.
6. Press the
key to confirm.
C/
(use the
key to delete the previous
MENU/R
and press the
key.
MENU/R
character if necessary), then press
key to
MENU/R
key
1. Press the
2. Press
key.
confirm and exit. The handset name will be
modified.
4. Use
or
key to choose INT RING/EXT
When replacing the batteries, always
use good quality Ni-MH re-chargeable
batteries. Never use other batteries or
conventional alkaline batteries.
MENU/R
or
key repeatedly to choose HS
MENU/R
RING, press the
key.
SETTING, press the
key.
Microphone
Charging contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
|