INSTRUCTION MANUAL
VMC-L1015
VMC-L1017
VMC-L1019
Color TFT LCD monitor
About this manual
• Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference.
• This manual gives basic connections and operating instructions for 3 models (VMC-L1015, L1017 and L1019).
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Contents
• Use only the power source specified on the unit.
Names of controls/parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connection instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Instructions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Monitoring display adjustment. . . . . . . . . . . . . . . . . . . . . . . 6
Computer display adjustment . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
External dimensions & adjustable angle . . . . . . . . . . . . . . . 9
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
• When not using this unit for a long period of time, or when
cleaning it, be sure to disconnect the power plug from the
AC outlet.
• Do not allow anything to rest on the power cord. And do
not place this unit where people will tread on the cord. Do
not overload wall outlets or power cords as this can result
in a fire or electric shock.
• Avoid using this unit under the following conditions:
- in extremely hot, cold or humid places,
- in dusty places,
- near appliances generating strong magnetic fields,
- in places subject to direct sunlight,
- in badly ventilated places,
- in automobiles with doors closed.
• Do not cover the ventilation slots while in operation as this
could obstruct the required ventilation flow.
Features
• When dust accumulates on the screen surface, clean it
with a soft cloth.
• Unplug this unit from the AC outlet and refer servicing to
qualified service personnel under the following conditions:
• Multilingual menu support
English/Chinese/French/German/Spanish/Italian/
Japanese
- when the power cord is frayed or the plug is damaged,
- if liquid has been spilled into the unit,
• Picture in Picture (PIP) function
- if the unit has been dropped or the cabinet has been
damaged,
• NTSC/PAL automatic select
- when the unit exhibits a distinct change in
performance.
• Do not attempt to service this unit yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Always refer servicing to qualified service
personnel.
Accessories
I AC adapter
I AC cord
I VGA connecting cable
– 2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of controls/parts
Front view
Viewing area
Automatic display adjustment control
Adjustment control (MENU)
For fine adjustment. (Pages 6, 7)
(AUTO)
Automatically adjusts the screen
(for use with VGA connections). (Page 5)
Contrast adjustment control
Power button (POWER)
Turns the power on or off.
For adjusting the screen contrast.
(Page 5)
• Select the appropriate menu item.
MENU
AUTO
MODE
POWER
Volume adjustment control
Adjusts the volume level. (Page 5)
Power indicator
light
• For adjustment, change the setting value.
Brightness adjustment control
Adjusts the brightness of the screen. (Page 5)
• Select the appropriate menu item.
Input mode control (MODE)
Changes the input mode. (Page 5)
Rear view
Power input terminal (DC IN) (Page 4)
DC IN
VGA IN
VGA signal input terminal (VGA IN)
For the input of a computer
VGA (Video Graphics Array) signal.
Composite signal input terminal
(BNC IN)
For the input of CCD camera surveillance image
signal.
BNC IN
Composite signal output terminal
(BNC OUT)
BNC OUT
Sends the image to BNC IN.
Y/C IN
S-Video signal input terminal (Y/C IN)
For the input of S-Video signal.
Y/C OUT
S-Video signal output terminal
(Y/C OUT)
For the output of S-Video signal.
AUDIO OUT AUDIO IN
IN
4
3
Pin number Signal
Audio-Out terminal
(AUDIO OUT)
1
2
3
4
GND (Y)
2
4
1
3
GND (C)
For audio output.
OUT
Y
C
Audio-In terminal
(AUDIO IN)
For audio input.
2
1
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection instructions
• When connecting, ensure the power supply to each unit is switched off.
• The other devices and connection cables required are sold separately.
Connect the devices to the connection terminals at the rear panel.
1
: Input signal
Connection example
: Output signal
(Refer to 2 for steps.)
DC IN
Computer
VGA OUT
(Included VGA connecting cable)
VGA IN
CCD Camera etc.
BNC OUT
BNC IN
BNC IN
Monitor TV etc.
BNC OUT
Y/C (S-VIDEO) OUT
Y/C IN
Y/C OUT
Y/C (S-VIDEO) IN
Hard-disk recorder etc.
AUDIO LINE IN
AUDIO OUT AUDIO IN
AUDIO LINE OUT
Amplifier etc.
Connect the power cord (DC 12V).
2
Connect the included AC adapter plug to the power input terminal (DC IN), and then connect the AC cord between the
AC adapter and AC outlet.
• Once the power cord is
connected, the power supply will
reach the main unit.
AC adapter
(Included)
AC cord (Included)
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions for use
2
2
A
3 4
1 5
B
MENU
A
ME
POW
) [0 – 51].
1Switch the power button (POWER) on.
3Adjust the brightness (
R The power indicator light will light up.
POWER
Decrease Increase
• As the brightness is being adjusted, the
Power indicator light
symbol
will be displayed in the upper left of the screen.
Press the input mode control (MODE) and
choose the input signal.
2
4Adjust the contrast (
) [0 – 51].
MODE
• Press once and the currently selected signal will be
displayed. Press again and the available signal
options will be displayed in the order shown below.
(The symbol for selected option will be displayed in
the upper left of the screen.)
Decrease Increase
• As the contrast is being adjusted, the
will be displayed in the upper left of the screen.
symbol
A Adjust the volume [0 – 51].
: Composite signal (BNC IN)
: S-Video signal (Y/C IN)
: VGA signal (VGA IN)
Decrease Increase
• As the volume is being adjusted, the
symbol will be displayed in the upper left of the
screen.
: DVI signal (DVI IN)
Cannot be used
B Screen automatic adjustment
(For VGA signal)
: Component signal (Y, Cb, Cr IN)
Cannot be used
AUTO
• When the signal is changed, initially a blue screen
will be displayed, followed by the display of the
chosen signal 2-3 seconds later.
R The clock, phase and screen position are
automatically adjusted according to the
specified input signal.
• When there is no input detected on the chosen
signal, “NO SIGNAL” will be displayed.
When viewing is finished, press the
power button (POWER).
• If the power to the connected device is off, “VIDEO
LOSS” will be displayed.
5
R The power indicator light will go out.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitoring display adjustment
Adjustment method for
: Composite/
: S-Video signal selection
I Operation
1 Press the adjustment control (MENU).
R At the top of the screen, an adjustment panel as shown in the diagram
to the right will be displayed.
Adjustment item Setting value
2 Choose the adjustment item.
Composite In
NTSC
Color
30
25
Tint
Down
Up
Brightness
Contrast
Sharpness
Volume
H-Position
Language
Color Temp.
Scan
25
MENU
AUTO
MODE
POWER
25
3 Change the setting value.
27
30
25
English
9300K
Full
Off
PIP
Recall
MENU
4If necessary, repeat
1
2
3
steps 2 and 3.
• Pressing the adjustment control (MENU) again, or waiting for a number of
seconds will cause the adjustment panel to disappear.
I Adjustment item
Item
Color
Description
Parameters
0 – 51
Default setting
Adjust the color.
30
25
25
25
27
30
25
Tint
Adjust the tint (only available for NTSC signal).
Adjust the brightness.
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
Brightness
Contrast
Sharpness
Volume
H-Position
Adjust the contrast.
Adjust the sharpness.
Adjust the volume.
Adjust the horizontal position of the display.
English, Chinese,
French, German,
Spanish, Italian,
Japanese
Language
Select the language of the display.
English
9300°K, 6500°K,
Standard
Color Temp.
Scan
Select the color temperature.
Select the image scan type.
9300°K*
Full
Over, Under, Full, 1:1
Select to use Picture in Picture, showing an additional smaller
display in the upper left corner.
PIP
VGA, Off
Off
Pressing the +, – buttons together will return the settings to the
default setting.
Recall
–
–
*
May differ depending on location of purchase.
•
•
The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings will return to default.
The default language display is English. If the language setting is changed, the menu display will be in the language chosen.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer display adjustment
: Adjustment method for VGA signal selection
I Operation
Adjustment item Setting value
1
2
Press the adjustment control (MENU).
R At the top of the screen, an adjustment panel as
shown in the diagram to the right will be
displayed.
VGA IN
1024x768@60Hz
Brightness
Contrast
H-Position
V-Position
Clock
25
25
Choose the adjustment item.
25
31
MENU
AUTO
MODE
POWER
25
Phase
13
Color Temp.
User Color R
User Color G
User Color B
OSD H-Pos.
OSD V-Pos.
Volume
User color
51
51
Down
Up
51
MENU
3
4
Change the setting value.
25
25
1
2
3
30
PIP
Off
English
Language
Recall
If necessary, repeat steps 2 and 3.
• Pressing the adjustment control (MENU) again, or waiting for a number of seconds will cause
the adjustment panel to disappear.
I Adjustment item
Item
Brightness
Contrast
H-Position*
V-Position*
Description
Parameters
0 – 51
Default setting
Adjust the brightness.
Adjust the contrast.
25
25
25
31
0 – 51
0 – 51
0 – 51
Adjust the horizontal position of the display.
Adjust the vertical position of the display.
Adjust the clock (when vertical lines can be seen etc.).
Clock*
0 – 51
25
•
Make fine adjustments until the vertical lines disappear. Adjusting the
clock will also change the width of the display.
Phase*
Adjust the phase (when the screen is flickering, etc.).
Select the color temperature.
0 – 51
9300°K, 6500°K,
User color
13
Color Temp.
User color
User Color R Adjust the Red (when Color temp. is set to User color).
User Color G Adjust the Green (when Color temp. is set to User color).
User Color B Adjust the Blue (when Color temp. is set to User color).
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
51
51
51
25
25
30
OSD H-Pos.
OSD V-Pos.
Volume
Adjust the horizontal position of the adjustment panel.
Adjust the vertical position of the adjustment panel.
Adjust the volume.
Select to use Picture in Picture, showing an additional smaller
display in the upper left corner.
Composite, S-Video,
Component, Off
English, Chinese,
French, German,
Spanish, Italian,
Japanese
PIP
Off
English
–
Language
Recall
Select the language of the adjustment panel.
Pressing the +, – buttons together will return the settings to the
default value.
–
*
Use this when pressing the automatic display adjustment control (AUTO) (page 5) does not achieve the desired result. Also, by pressing the
automatic display adjustment control (AUTO), these values will be changed.
•
•
The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings will return to default.
The default language display is English. If the language setting is changed, the menu display will be in the language chosen.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before requesting service or repair, perform a check as described in the following section. If this does not work, return the unit to
the place of purchase or authorized repair agent to undergo adjustment.
Problem
Points to check
• Is the connected device outputting a video signal?
No image is displayed.
• Is the connection correct? (Page 4)
• Using the input mode control (MODE), is the correct input signal selected? (Page 5)
• Is the connected device outputting an audio signal?
• Is the connection correct? (Page 4)
No sound is heard.
• Check the volume level is not set to 0. (Page 5 – 7)
• Are the brightness and contrast set to the correct level? (Page 5 – 7)
• Is there a device nearby which is emitting a strong magnetic field? If so, remove it.
The display is dark.
The display is flickering.
• Is there a speaker or magnet nearby?
After removing the object, turn the unit off for at least 30 minutes and switch it on
again.
Colors displayed in different parts of
the display are strange.
• Effects of this type may be caused by temperature changes in the room but do not
indicate a fault.
There is a hissing noise.
When 2 or more monitors are next
to each other, the display shakes or • The monitors are interfering with each other. Increase the distance between them.
there is some distortion.
– 8 –
Download from Www.Somanuals.com. All Manuals Search And Download.
External dimensions & adjustable angle
I VMC-L1015
(Unit: mm)
353.2
36.4
305.2
170.0
Front view
Side view
Angles of adjustment
Angles of adjustment
Angles of adjustment
I VMC-L1017
(Unit: mm)
375.0
341.0
41.6
170.0
Front view
Side view
I VMC-L1019
(Unit: mm)
421.2
379.4
44.6
170.0
Front view
Side view
About the tilt adjustment
The screen may be adjusted 5° forward and 40° backward.
When adjusting the screen tilt, use a soft cloth to prevent damaging the screen.
After adjusting the tilt, check the cables to ensure the monitor is not pulled over.
– 9 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
VMC-L1015
VMC-L1017
Color video monitor
NTSC, PAL
VMC-L1019
Type
Color system
15" active matrix
TFT LCD panel
17" active matrix
TFT LCD panel
19" active matrix
TFT LCD panel
LCD display
Screen size
Viewable size (H x V)
Pixel pitch (H x V)
381 mm diagonal
304 x 228 mm (4:3)
0.297 x 0.297 mm
432 mm diagonal
337 x 270 mm (5:4)
0.264 x 0.264 mm
500 TV lines or more (Y/C input mode)
1280 x 1024
480 mm diagonal
376 x 301 mm (5:4)
0.294 x 0.294 mm
Horizontal resolution
Scanning frequency
1024 x 768
Horizontal: 30 K – 80 KHz
Vertical: 56 Hz – 75 Hz
500:1
Contrast ratio
Brightness
350:1
250 cd/m2
Response time Tr/Tf
Display color
6/17 ms
15/10 ms
16.7 M
View Angle L/R
60°/60°
88°/88°
85°/85°
View Angle Up/Down
Display monitor timing
Display mode
40°/60°
88°/88°
VESA compatible
VIDEO & S-VIDEO & VGA
Input connector
Video signal (BNC IN)
Composite sync signal, 1.0 Vp-p, 75 Ω BNC connector
Separate Y/C signal, mini-DIN connector
Y signal: 1.0 Vp-p, 75 Ω negative sync
C signal: 0.286 Vp-p,75 Ω negative sync
S-Video signal (Y/C IN)
Audio signal (AUDIO IN)
–6 dBs (400 mVrms), RCA pin
VGA Monitor Connector (15-pin)
Red signal, Green signal, Blue signal: 0.7 Vp-p, 75 Ω, positive sync
5
3
1
Pin No.
1
Pin No.
6
Pin No.
G
Signal
Red signal
Green signal
Blue signal
No use
Signal
GND (Red)
GND (Green)
GND (Blue)
No use
Signal
4
2
No use
2
7
H
SDA
VGA signal (VGA IN)
3
8
I
H sync
V sync
SCL
4
9
J
5
No use
F
GND (sync)
K
F 9 8 7 6
K J I H G
Output connector
Video signal (BNC OUT)
Composite sync signal, 1.0 Vp-p, 75 Ω BNC connector
Separate Y/C signal, mini-DIN connector
Y signal: 1.0 Vp-p, 75 Ω negative sync
C signal: 0.286 Vp-p,75 Ω negative sync
S-Video signal (Y/C OUT)
Audio signal (AUDIO OUT)
Menu language
Audio power output
Power input
–6 dBs (400 mVrms), RCA pin
English/Chinese/French/German/Italian/Japanese
Approx. 1 W
DC 12 V/3 A
Temperature: 0°C – 40°C
Humidity: 20% – 85% (non-condensation)
Temperature: –20°C – 60°C
Humidity: 20% – 85% (non-condensation)
Operating condition
Storage condition
Power consumption
Weight (Adaptor included)
Approx. 40 W
4.0 kg
Approx. 50 W
5.0 kg
6.1 kg
Features and specifications are subject to change without prior notice or obligations.
– 10 –
Download from Www.Somanuals.com. All Manuals Search And Download.
SANYO INDUSTRIAL VIDEO
VIDEO MONITOR LIMITED WARRANTY
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user's expense,
unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the
toll-free number listed below.
For product operation, authorized service center referral, service assistance or problem resolution, call
CUSTOMER INFORMATION 1-800-421-5013
Weekdays 8:30 AM – 5:00 PM Pacific Time
For accessories and/or parts, call
PARTS ORDER INFORMATION 1-800-726-9662
Weekdays 8:30 AM – 5:00 PM Pacific Time
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES OF AMERICA, EXCLUDING ALL
U.S. TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER OR END-USER. THE
ORIGINAL DATED BILL OF SALE, SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE
CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO Fisher Company warrants this SANYO product against defects in materials
and workmanship for the periods specified below. SFC will repair or replace (at its option) the product and any of its parts which fail to conform to this
warranty. The warranty period commences on the date the product was first purchased or rented at retail.
LABOR
1 YEAR
PARTS
1 YEAR
EXCLUSIONS
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model's instruction manual, or (B) the
repair of any product whose serial number has been altered, defaced or removed.
This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine maintenance.
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair.
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to, any
malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished
instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or
other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to assume for it any other obligation or
liability.
SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH REGARD TO THIS PRODUCT (INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS). IN NO EVENT SHALL SFC BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING FROM THE OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER
THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL. SFC'S LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM
ANY CAUSE WHATSOEVER, ARISING OUT OF OR IN CONNECTION WITH THE SALE, USE OR OWNERSHIP OF THIS PRODUCT INCLUDING
WARRANTOR'S NEGLIGENCE, ALLEGED DAMAGED OR DEFECTIIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT,
SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
ATTENTION
For your protection in the event of theft or loss of this product, please fill in the information below for you own personal records.
Model No.
_____________________________________________
Serial No.
______________________________________________
(Located on back or bottom side of unit.)
Date of Purchase
Where Purchased
_______________________________________
Purchase Price
_________________________________________
_____________________________________________________
21605 Plummer Street,
Chatsworth, California 91311
1AC6P1P2921--
L8MAH, L8MAJ, L8MAK/US (041112KR)
Printed in Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
|