Sanyo Camcorder VPC C1 User Guide

INSTRUCTION MANUAL  
Digital Movie  
VPC-C1EX  
VPC-C1  
Important note  
This manual explains how to safely operate the VPC-C1EX and  
VPC-C1. Any information regarding only one of these products will  
be labeled as such.  
Please read these instructions carefully before using the camera. Make  
sure to read and understand the section “USING YOUR CAMERA  
SAFELY AND CORRECTLY” on pages 7 to 24. Keep this manual in a  
safe place for later reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tested to Comply with FCC Standards  
FOR HOME OR OFFICE USE  
The FCC logo is included in the rating that can be found inside the battery case.  
Declaration of Conformity  
Model number  
Trade Name  
: VPC-C1  
: SANYO  
Responsible party: SANYO FISHER COMPANY  
Address  
Telephone No.  
: 21605 Plummer Street, Chatsworth, California 91311  
: (818) 998-7322  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including  
interference that may cause undesired operation.  
eFOR CANADIAN USERS  
This Class B digital apparatus complies with Canadian ICES-003.  
Conformity to EC Directives  
e
This unit complies with EC Directives 89/336/EEC  
and 73/23/EEC.  
e
The rating plate can be found inside the set after the  
battery cover and battery are removed.  
English ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OUTLINE OF OPERATION  
To help you get started enjoying using your camera right away, given below is  
an outline of the fundamental operation, from setup to shooting to playback.  
SETUP  
(1) Connect the AC adapter/charger (page 128).  
(2) Install the battery pack and SD Memory  
Card*1 in the camera (page 35, 36).  
CAUTION  
e
e
This camera uses an SD Memory Card  
instead of photographic film to record  
images. Be sure to install the SD Memory  
Card before operating the camera. A 128MB  
SD Memory Card is supplied with this  
camera.  
Be sure to format the SD Memory Card with  
this camera before using it. A card that is not  
formatted using the camera may limit your  
full use of all the cameras capabilities.  
SHOOTING  
(1) Turn on the camera (page 37).  
(2) Take photos in the BASIC operation mode*2.  
e
In the BASIC mode, it's easy to take great photos  
right away.  
e
e
e
To switch the menu mode, see page 42.  
For shooting video clips, see page 47.  
For shooting still photos, see page 48.  
1 DEonwgnlislohad from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK  
(1) View your photos in the BASIC operation  
mode (page 64).  
Playback as well is easy in the BASIC mode.  
*1: About the SD Memory Card  
In this manual, the SD Memory Card is  
referred to as card.  
*2: Shooting in the BASIC mode  
For recording and viewing images, your  
camera has two modes to choose from. In the  
BASIC mode, only the basic camera functions  
are used. In the EXPERT mode, you have full  
access to all the camera's functions.  
Symbols used in this manual  
HINT  
Points that may prove useful when using the camera.  
NOTE  
Points giving some extended instructions or special points to pay  
attention to.  
CAUTION Points that require special attention.  
(page xx) Refer to the page indicated for detailed information.  
You may find the answers to questions or problems concerning camera  
operation in the sections COMMONLY ASKED QUESTIONS(page 149) and  
TROUBLESHOOTING(page 157).  
English 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
OUTLINE OF OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
USING YOUR CAMERA SAFELY AND CORRECTLY . . . . . . . . .7  
CHECKING THE INCLUDED ACCESSORIES . . . . . . . . . . . . . .25  
GETTING THE MOST OUT OF YOUR CAMERA. . . . . . . . . . . .27  
i PREPARATION  
PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
CHARGING THE BATTERY PACK. . . . . . . . . . . . . . . . . . . . . . .34  
INSTALLING THE BATTERY PACK AND CARD . . . . . . . . . . . .35  
TURNING THE POWER ON AND OFF. . . . . . . . . . . . . . . . . . . .37  
OPERATION BUTTONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
SWITCHING THE MENU MODE. . . . . . . . . . . . . . . . . . . . . . . . .42  
BEFORE TAKING PICTURES. . . . . . . . . . . . . . . . . . . . . . . . . . .44  
3 DEonwgnlislohad from Www.Somanuals.com. All Manuals Search And Download.  
BASIC MODE  
i SHOOTING  
CAPTURING IMAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
ABOUT THE BASIC MODE SHOOTING SETTING SCREEN . . 52  
CHANGING THE SHOOTING SETTINGS . . . . . . . . . . . . . . . . . 55  
OTHER SHOOTING FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . 58  
i PLAYBACK  
VIEWING IMAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
ABOUT THE BASIC MODE PLAYBACK SETTING SCREEN . . 68  
OTHER PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . 70  
English 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPERT MODE  
i SHOOTING  
ABOUT THE EXPERT MODE SHOOTING SETTING SCREEN 78  
VIDEO IMAGE QUALITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81  
FOCUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82  
FLICKER-REDUCTION FUNCTION . . . . . . . . . . . . . . . . . . . . . .83  
ISO SENSITIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84  
WHITE BALANCE SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . .85  
EXPOSURE CORRECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . .86  
i PLAYBACK  
ABOUT THE EXPERT MODE PLAYBACK SETTING SCREEN.87  
ROTATE IMAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89  
EDITING VIDEO CLIPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90  
PRINT SETTINGS (STILL IMAGES ONLY) . . . . . . . . . . . . . . . .98  
5 DEonwgnlislohad from Www.Somanuals.com. All Manuals Search And Download.  
OPTION SETTINGS  
i CAMERA SETTINGS  
ABOUT THE OPTION SETTING SCREEN . . . . . . . . . . . . . . . 105  
GUIDANCE FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107  
OPERATIONAL SOUNDS SETTING . . . . . . . . . . . . . . . . . . . . 108  
USB FUNCTION SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . 110  
FILE NO. RESET FUNCTION. . . . . . . . . . . . . . . . . . . . . . . . . . 111  
DATE AND TIME SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 114  
SCREEN LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117  
TV SYSTEM SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118  
POWER SAVE SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119  
RESETTING THE CAMERA SETTINGS . . . . . . . . . . . . . . . . . 121  
FORMATTING A CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
CHECKING THE REMAINING CARD MEMORY . . . . . . . . . . . 124  
CHECKING THE REMAINING BATTERY PACK CHARGE. . . 126  
i OTHER DEVICES AND CONNECTIONS  
DOCKING STATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128  
CABLE ADAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138  
CONNECTING TO A PRINTER . . . . . . . . . . . . . . . . . . . . . . . . 139  
i APPENDICES  
COMMONLY ASKED QUESTIONS . . . . . . . . . . . . . . . . . . . . . 149  
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163  
English 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR CAMERA SAFELY AND  
CORRECTLY  
CAMERA  
WARNING  
i If the camera makes a strange noise, emits a  
strange odor, or if smoke comes out from it,  
immediately turn off the power and remove the  
battery pack.  
e
If the camera is used under these conditions, it may cause  
a fire or electric shock. Immediately turn off the digital  
camera, remove the battery pack, and wait to make sure  
no more smoke comes from the camera. Then take it to the  
dealer for service. Do not try to repair or open the camera  
yourself.  
i Do not modify or open the cabinet  
e
High voltage circuits are inside, and there is a high risk of  
fire or electric shock if they are touched. Any internal  
check, setting, or repair should be performed by the dealer.  
i Do not use while driving  
e
e
Do not capture images, play back images, or watch the  
LCD monitor while driving a vehicle. Doing so may cause  
an accident.  
Be careful where you put down the camera inside an  
automobile. During sudden stops or turns it may fall behind  
the brake pedal and prevent braking.  
i Be aware of your surroundings when using the  
camera  
e
e
Pay close attention to your surroundings when using the  
camera. Failure to do so may lead to an accident or injury.  
When using the camera while walking, be very careful of  
your surroundings and especially the traffic to avoid  
accidents.  
e
Do not use the camera inside an airplane or elsewhere  
where its use may be restricted.  
7 DEonwgnlislohad from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
i Do not get the camera wet  
e
This camera is not water-resistant. Do not allow it to get  
wet, as doing so may cause a fire or electric shock.  
e
Do not use the camera in a bathroom.  
e
If the camera gets wet, immediately turn it off and remove  
the battery pack. Then take it to a dealer for repair. Using  
the camera after it has been become wet may cause a fire,  
electric shock, or other accident.  
i Do not use during a storm  
e
To avoid the risk of being struck by lightning, do not use the  
camera during a thunderstorm. In particular, if used in an  
open field, you have an increased chance of being struck by  
lightning. Quickly seek refuge in a place that will protect you  
from lightning.  
i Do not place on an unstable surface  
e
e
The camera may fall, resulting in damage to the camera or  
injury.  
If the camera has fallen and its body is damaged, turn it off,  
remove the battery pack, and take it to the dealer for repair.  
Using the camera after its body has been damaged may  
cause a fire or electric shock.  
i Do not look through the camera into the sun  
e
Do not look through the camera at the sun or any other  
strong source of light. Doing so may seriously injure your  
eyes.  
i Do not use the flash close to a person’s face  
e
To prevent possible eye injury, do not use the flash near a  
persons face (especially young children or babies). If the  
flash is used close to a persons opened eyes, there is a risk  
that it may damage that persons eyesight.  
English 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR CAMERA SAFELY AND CORRECTLY  
WARNING  
i Do not use where there is risk of explosion  
e
Do not use the camera in a location where there is explosive  
gas, or any other flammable material in the air. Doing so may  
cause a fire or an explosion.  
i Keep the camera out of the reach of children  
e
The following may happen if children play with the camera:  
d They may wrap the strap around their neck and suffo-  
cate.  
d They may swallow the battery pack or other small  
parts. In such a case, consult a physician immedi-  
ately.  
d They may damage their eyesight if the flash goes off  
too close to their eyes.  
d They may get hurt by the camera.  
CAUTION  
i Cautions when carrying the camera  
e
Do not walk around holding the camera by the handstrap. It  
may hit other objects and get damaged. When walking  
around, hold the camera in your hand or place it in a pocket.  
e
e
Be careful not to drop the camera or subject it to strong  
shocks.  
Make sure direct sunlight does not hit the camera lens, as  
that may damage the internal parts. When not using the  
camera, be sure to always turn it off and close the lens cover.  
i If the camera is not going to be used for a long  
period of time  
e
For safetys sake, remove the battery pack from the camera.  
This will prevent any possible excess heat or leakage of  
battery fluid that may result in injuries or damage to nearby  
objects. (Note that when the battery pack is removed for a  
long period, the time and date settings will be cleared.)  
9 DEonwgnlislohad from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
i Cautions during use and storage  
e
This camera is a precision instrument. When using or  
storing the camera, make sure to avoid the following  
locations to avoid damage.  
d Places in direct sunlight  
d Places where humidity and temperature are high  
d Places that may get wet  
d Places close to an air conditioner or heater  
d Inside a car  
d Places where there is dust and dirt  
d Places where there is a fire burning  
d Places where volatile products are stored  
d Places subject to vibration  
Operating environment:  
d Temperature  
d Humidity  
0°C to 40°C (operation)  
20 to 60°C (storage)  
30 to 90% (operation, no condensation)  
10 to 90% (storage, no condensation)  
English 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR CAMERA SAFELY AND CORRECTLY  
DOCKING STATION AND AC ADAPTER/  
CHARGER  
DANGER  
i Do not recharge battery packs that are not Li-ion  
battery packs (Model DB-L20)  
e
Do not recharge a battery pack other than the supplied Li-ion  
battery pack (DB-L20). Recharging a dry-cell battery or other  
type of rechargeable battery may cause excess heat,  
combustion, or leakage, and cause a fire, injuries, burns, or  
damage to nearby objects.  
i Use a 100 to 240 V AC power supply  
e
If used with a power supply other than the one specified, it  
may cause a fire or electric shock. The power cord is rated  
for 125 V AC. Therefore, if you plan to use the docking  
station and/or the AC adapter/charger in a region with a  
different voltage, it may be necessary to replace the power  
cord with one that can be used in that location. For details,  
please see page 168.  
i Do not disassemble or modify  
e
e
It is dangerous to touch the inside. Doing so may cause a fire  
or electric shock.  
Do not use as a direct current generator.  
i Do not get the docking station or AC adapter/  
charger wet  
e
Make sure they do not get wet, as doing so may cause a fire  
or electric shock.  
e
Do not use the camera in a bathroom.  
e
If the docking station or AC adapter/charger gets wet,  
immediately unplug it from the power outlet and remove the  
battery pack. Then contact the place of purchase. If used  
while wet, it may cause a fire, electric shock, or an accident.  
11 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DANGER  
i Cautions when plugging in  
e
Securely plug the power cord all the way into the power  
outlet. If the docking station or AC adapter/charger is used  
with the power cord not fully plugged in, heat may be  
generated and cause a fire.  
e
e
e
Do not use if the power cord is damaged or cannot be  
correctly plugged into the power outlet. Using in this  
condition may cause a fire or electric shock.  
Do not allow dust, etc., to build up on the power cord or  
power outlet. A build-up of dust may cause a short circuit  
or generate heat and cause a fire.  
When unplugging the power cord, be sure to hold the plug  
part and slowly pull it out of the power outlet. Pulling the  
cord portion may damage the power cord and cause a fire  
or electric shock.  
i Do not pull on the power cord to unplug it  
e
Do not leave the power cord plugged into the power outlet  
while the other end is not plugged into the docking station  
or AC adapter/charger. The loose end can cause  
electrocution if touched with wet hands or if handled by  
children.  
e
e
Use only the supplied power cord. If a different power  
cord is used, it may be rated for a different current load,  
and that may cause a fire.  
The supplied power cord is for exclusive use with the  
devices supplied with your camera. Do not use it with  
other devices, as doing so may cause a fire or electric  
shock.  
e
e
Do not use a bundled power cord, as the heat generated  
may cause a fire.  
When using an extension cord, make sure that the total  
wattage of the connected devices does not exceed the  
rated value of the extension cord. If the power load  
exceeds the rated value, it may cause a fire.  
English 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DANGER  
i Keep out of the reach of children  
e
Children may place the battery pack or other small  
components in their mouth or perform some other such  
unforeseeable action. If swallowed, consult a physician  
immediately.  
i If smoke or a strange odor is emitted, or if  
strange noises are heard, immediately unplug  
the power cord from the power outlet  
e
e
If used under these conditions, it make cause a fire or  
electric shock.  
If strange conditions such as these occur, immediately  
unplug the device, remove the battery pack, and wait to  
make sure no more smoke is emitted. Then contact the  
place of purchase. Do not try to repair or open the device  
yourself.  
i Do not handle with wet hands  
e
Handling the docking station or AC adapter/charger with  
wet hands may cause an electric shock.  
i Do not use during a storm  
e
Do not touch the docking station, AC adapter/charger or  
power cord while it is plugged into a power outlet during a  
thunderstorm. Doing so may cause an electric shock.  
13 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
i Do not damage the power cord  
e
Do not place heavy objects on the power cord. Do not  
place the power cord near a heat source. Do not  
excessively bend the power cord, modify it, or secure it  
with staples. Doing so may damage the power cord and  
cause a fire or electric shock.  
e
If the power cord is damaged, or if it does not plug  
properly into the docking station, AC adapter/charger or  
wall outlet, contact the place of purchase.  
i Do not place on an unstable surface  
e
e
The camera may fall, resulting in damage to the camera  
or injury.  
If it falls and the body is damaged, remove the battery  
pack and contact the place of purchase. If used while  
damaged, it may cause a fire, electric shock, or other  
damage.  
i Operating and storage conditions  
e
Do not use close to a heat source (close to a stove or  
heater) or leave it exposed to direct sunlight.  
Operating environment:  
d Temperature  
d Humidity  
0 to 40°C (charging)  
20 to 60°C (storage)  
20 to 80%  
(charging and storage)  
English 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LI-ION BATTERY PACK (DB-L20)  
DANGER  
This camera uses a Li-ion battery pack (Model DB-L20).  
i If there is leaking, discoloration, change of  
shape, rise in temperature, damaged exterior,  
strange odor or any other abnormal condition,  
immediately discontinue use and remove the  
battery pack from the camera, taking care to  
keep it well away from fire.  
e
Continued use of the battery pack under any of these  
conditions may result in fire, injury, explosion or other  
serious damage.  
e
If battery fluid is leaking, placing the battery pack in close  
proximity to a fire or other heat source may ignite the  
battery fluid and result in fire, damage, eruption of battery  
fluid, or smoke fumes.  
i Do not transform, take apart, or modify.  
e
Safety mechanisms and protective devices have been in  
incorporation in the battery pack for the purpose of  
preventing danger. Any modification, by transforming,  
disassembling, or directly soldering to it, etc., will defeat  
these safety devices and possibly cause the battery pack  
to catch fire, explode, or leak or spew battery fluid.  
i Do not connect the (+) and () terminals with a  
wire or other metal implement. Do not carry  
loose or keep with necklaces, hairpins, etc.  
e
Doing so may result in a short circuit, high voltage flow,  
fire, explosion, leaking or spewing battery fluid, or heat  
generation. Metal such as a wire or necklace, etc. may  
cause heat to be generated.  
i Do not throw the battery pack in the fire or sub-  
ject it to heat  
e
Doing so may cause the insulation to melt, damage the  
gas discharge valve and safety mechanisms, or ignite  
the battery fluid, resulting in fire or explosion.  
15 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DANGER  
i Do not drop, hit, or submit the battery pack to  
strong shocks  
e
If the safety mechanisms and protective devices are  
broken, an abnormal chemical reaction may occur inside  
the battery pack, or cause the battery pack to catch fire,  
explode, leak or spew battery fluid, or generate heat.  
i Do not allow the battery pack to come into con-  
tact with fresh or salt water, or allow the termi-  
nals to become wet.  
e
If the safety mechanisms and protective devices are  
damaged by corrosion, an abnormal chemical reaction  
may occur inside the battery pack, or cause the battery  
pack to catch fire, explode, leak or spew battery fluid, or  
generate heat.  
i Operating and storage conditions  
e
Temperature when using or recharging: 0 to 40°C  
e
Do not use, recharge, store or leave the battery pack near fire or  
inside a car exposed to the hot sun, etc. (locations in which the tem-  
perature reaches 60°C or higher).  
e
At high temperatures, the safety mechanisms and protective devices  
inside the battery pack may be damaged by corrosion, causing an  
abnormal chemical reaction to occur, or cause the battery pack to  
catch fire, explode, leak or spew battery fluid, or generate heat. If the  
safety mechanisms and protective devices are damaged, the battery  
pack will become unusable. An environment with extremely high or  
low temperatures will cause the battery capacity to deteriorate and  
shorten the usable time, and may even shorten the battery life.  
Avoid storing the battery pack with it near full charge. It is recom-  
mended to store the battery pack when it is near fully discharged.  
If the battery pack is completely discharged, it may become unable to  
be recharged again. To avoid this, charge the battery pack for at  
least five minutes every six months.  
e
e
e
e
Storage temperature: 10°C to 30°C  
When not using the battery pack, remove it from the camera and  
store at 0°C to 30°C in a place with no condensation.  
Humidity: 10% to 90% (no condensation)  
English 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DANGER  
i Use only the supplied docking station and AC  
adapter/charger  
e
If another charger is used, the battery pack may be  
overcharged, or recharged with an abnormal voltage,  
causing an abnormal chemical reaction to occur, or cause  
the battery pack to catch fire, explode, leak or spew battery  
fluid, or generate heat.  
i Use the battery pack only in the specified device  
e
If the battery pack is used in a device other than that  
specified, it may cause an abnormal voltage flow, or cause  
the battery pack to catch fire, explode, leak or spew battery  
fluid, or generate heat.  
i Do not peel or damage the outer case  
e
Damaging the outer case, inserting nails, hitting with a  
hammer, stepping on the battery pack, etc. may cause a  
short circuit inside the battery pack or cause the battery  
pack to catch fire, explode, leak or spew battery fluid, or  
generate heat.  
i If the battery pack is leaking and the electrolyte  
gets on your skin or clothing, immediately rinse  
with clean water  
e
If the electrolyte gets into your eyes, you risk losing your  
eyesight. Immediately rinse your eyes with clean,  
running water, and seek medical attention right away.  
Any electrolyte that comes into contact with your skin or  
clothing may harm your skin. Immediately rinse the area  
with clean, running water.  
i Insert the battery pack correctly, as specified  
e
e
When installing the battery pack in the charger or  
camera, pay attention to the indicated polarity (+ and ),  
and insert it correctly.  
If the battery pack is installed with the wrong orientation,  
it may cause an abnormal chemical reaction while in the  
charger, an abnormal voltage flow when it is used, or  
cause the battery pack to catch fire, explode, leak or  
spew battery fluid, or generate heat.  
17 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
i Always stop the recharging after the prescribed  
recharge time, even if the battery pack is not  
fully charged  
e
If you continue to recharge the battery pack, it may cause  
the battery pack to catch fire, explode, leak or spew  
battery fluid, or generate heat.  
i Keep out of the reach of children  
e
They may handle the battery pack in an unforeseeable  
manner that results in damage.  
CAUTION  
i Charge the battery pack before using it  
e
Always recharge the battery pack before using it for the  
first time, or when using it after it has been kept in storage  
for a long time. During recharging, the battery pack may  
be warm. This is normal and does not indicate a  
malfunction.  
i Note concerning the battery pack after use  
e
The battery pack may be warm immediately after the  
camera is used. If removing the battery pack, turn off  
the camera and allow the battery pack to cool down  
before removing it.  
i Recycling the battery pack  
e
To conserve the environment and for efficient use of  
natural resources, please discharge the used battery  
pack, cover the (+) and () terminals with tape and recycle  
the insulated battery pack.  
e
If disposing of the battery pack as unburnable trash,  
please follow all applicable regulations of your area.  
English 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Concerning the accessories  
WARNING  
i Cautions concerning the use of the AC adapter/charger  
e
e
Use only the supplied docking station and AC adapter/charger with your  
camera. Do not use a docking station or AC adapter/charger other than the  
ones indicated here, designed for specific use with your camera.  
If a docking station or AC adapter/charger other than the ones specified is  
used, it may damage the camera and cause a fire or electric shock.  
i Cautions concerning the card  
e
e
Immediately after use, the card will be very hot. Before removing the card,  
turn off the camera and wait for the temperature to cool down.  
Keep out of the reach of children. Young children may put the media in their  
mouth and choke or cause some other unexpected injury or accident.  
19 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONCERNING THE LITHIUM BATTERY  
(CR2025)  
WARNING  
i Cautions concerning the CR2025 bat-  
tery  
e
A CR2025 lithium battery is used for the  
remote control. Do not use a battery other  
than the CR2025 lithium battery.  
e
Install the battery with the (+) and ()  
terminals correctly oriented as indicated. If the  
battery is placed in the wrong orientation, it  
may cause a fire, overheating, or rupturing.  
e
e
e
Do not recharge, short circuit, disassemble, modify, heat, or place the  
battery in a fire. Doing so may cause a fire, overheating, or rupturing.  
Do not hold the battery with metal tweezers or a similar tool. Doing so may  
cause a short circuit leading to a fire, overheating, or rupturing.  
Do not perform soldering on the battery or use, store, or leave it near a fire,  
under direct sunlight, in a hot car, or other high temperature location.  
e
Do not use the battery if it is leaking.  
e
If the electrolyte gets into your eyes, you risk losing your eyesight. Do not  
rub your eyes, wash them immediately with clean water, and seek medical  
attention right away. If electrolyte gets on your skin or clothing, it may cause  
irritation. Immediately wash with clean water.  
e
Keep the battery out of the reach of children. If the battery is accidentally  
swallowed, contact a physician immediately. It may cause poisoning or  
suffocation.  
e
e
When disposing of batteries, make sure to follow all applicable regulations.  
When disposing of the lithium battery, place tape on its positive (+) and  
negative () terminals to prevent shorting. Do not mix the lithium battery  
with other batteries. Doing so may cause a fire or rupturing.  
English 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR CORRECT USE OF YOUR CAMERA  
i Cautions before capturing important images  
e
e
Before capturing important images, make sure that the camera is  
operating properly and in condition to capture the image properly.  
Sanyo Electric shall not be held responsible for any losses that result  
from images that could not be recorded, are erased, destroyed, or  
damaged in any way due to a problem with the camera, any of its  
accessories, or its software.  
i Caution concerning copyrights  
e
The images you capture with your camera are for your own private use;  
any other use may violate the rights of copyrights owners.  
i Cautions when cleaning the camera  
Cleaning procedure  
1
2
Turn off the camera and remove the battery pack.  
Remove the dirt with a soft cloth.  
If the camera is extremely dirty,  
3
Wipe with a soft cloth moistened with a mild detergent diluted with water  
and wrung dry.  
Caution  
e
Do not use benzene or thinner products to clean the camera.  
Doing so may cause deformation, discoloration, or paint peeling.  
When using a chemically treated cloth, carefully read its instructions and  
warnings.  
e
Do not spray insecticides or volatile sprays on the camera. Do not let rubber  
or vinyl objects contact the camera for a long period. They may cause  
deformation, discoloration, or paint peeling.  
21 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
i Caution concerning the battery pack  
e
Periodically clean with a dry cloth the terminals (contacts) of the batteries.  
Do not touch the battery terminals with your bare hands. Doing so will allow  
contaminants from your hands to adhere to the terminals and oxidize,  
increasing the contact resistance. If the contact resistance increases, the  
usable life of the batteries will diminish.  
i Caution when cleaning the lens  
e
If the lens gets dirty, use a commercially available air blower or a cleaning  
cloth for photographic equipment to clean it.  
i When not using the camera for a long period  
e
e
Remove the battery pack. However, when the battery pack is removed for a  
long time, the camera functions may begin to not work properly. Periodically  
reinstall the battery pack and check the camera functions.  
If the battery pack is left in the camera, a small amount of power is still used  
even if the camera is turned off. If the battery pack is left in the camera for a  
long period, it may become completely discharged and lose its ability to be  
recharged again.  
i Cautions concerning condensation  
e
Using the camera with condensation inside it may damage the camera.  
If condensation seems likely to form  
e
Place the camera in a plastic bag and seal it, and then wait until the camera  
has reached the ambient temperature.  
Be careful of condensation under the following conditions  
e
When moving the camera suddenly from a cold place to a warm place.  
e
When the ambient temperature changes drastically, such as when a heater  
is turned on to quickly heat the room.  
e
e
When the camera is placed in the path of cool air from an air conditioner.  
When the camera is placed in a location of high humidity.  
English 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR CORRECT USE OF YOUR CAMER  
(continued)  
i Caution concerning undesired interference  
e
The camera may create undesired interference if used close to a television  
or radio. To avoid this type of interference, make sure the cores on the  
supplied cables are not removed.  
Dedicated USB interface cable  
Dedicated AV interface cable  
Core  
Core  
i Caution concerning magnetism  
e
Do not place credit cards, bank cards, floppy disks, or other items that may  
be damaged by magnetic fields near the speaker. Data may be lost or the  
magnetic strips on cards may be damaged.  
i Cautions concerning data storage  
e
e
It is recommended that any important data be copied onto a separate media  
(such as a hard disk, MO disk, or CD-R disk).  
Stored data may be lost (or corrupted) in cases such as those listed below.  
Sanyo Electric will not be held responsible for any damage or lost profits  
arising from the loss of data.  
d If the card is used incorrectly.  
d If the card is not inserted correctly into the camera.  
d If the card is subjected to electrical or mechanical shocks or other  
forces.  
d If the card is removed from the camera or if the camera is turned off  
during reading or writing operations.  
d If the card has reached the end of its usable life.  
23 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
i Cautions when handling the cards  
e
e
The cards are precision devices. Do not bend, drop, or subject them to  
strong forces or shocks.  
Avoid using or storing the cards in places with extremely high or low  
temperatures, subject to direct sunlight, in a completely closed vehicle, near  
air conditioners or heaters, or in humid or dusty locations.  
e
e
e
Avoid using or storing the cards in locations where strong static electrical  
charges or electrical noise can be easily generated.  
Do not allow the edges of the cards to become contaminated with foreign  
materials. Gently wipe away any contamination with a soft, dry cloth.  
Do not carry the cards in trouser pockets, as the cards may become  
damaged when you sit down or make other movements that may apply  
forces.  
e
e
Before using a new card or a card that was used in other equipment, be  
sure to format it using the camera (see FORMATTING A CARDon page  
122).  
When buying commercially available products, carefully read the  
instructions and warnings that come with the card.  
i Caution concerning high temperatures  
e
During shooting, when the internal temperature of the camera becomes  
high, the \ icon will appear on the LCD monitor. When the \ icon  
appears, it is still possible to capture and play back images for a while.  
However, if the temperature rises further, it will become impossible to  
record (although playback will still be possible). In this case, discontinue  
shooting as soon as possible, and wait until the temperature falls before  
using the camera again.  
e
Note that particularly when shooting video clips, soon after the \ icon  
appears, the remaining shooting time indication will appear, and when that  
figure becomes 0, further shooting is impossible.  
English 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHECKING THE INCLUDED ACCESSORIES  
e
Handstrap: 1  
e
Software: 2 CD-  
ROM  
e
Li-ion battery pack  
(battery pack): 1  
e
e
Docking station: 1  
e
AV cable: 1  
e
e
USB interface cable: 1  
Cable adapter: 1  
Remote control unit:e Lens cap: 1  
1
A lithium battery  
(CR2025) is installed  
at the time of pur-  
chase.  
e
AC adapter/charger e Soft case: 1  
and power cord: 1  
25 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
e
SD Memory Card (128MB): 1  
Contact end  
Lock switch  
Lock  
Unlock  
Recording (images and sounds) and erasing  
are inhibited (accidental erase protect  
function) when the lock switch is set to the  
LOCK position.  
The card is normally used with the lock  
switch set to the unlocked position.  
i Handstrap  
i Lens cap  
i Soft case  
When not using the camera, keep  
it in the soft case for protection.  
Media cards that can be used with this camera  
The type of card that can be inserted into and used with this camera is:  
e SD Memory Card  
English 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING THE MOST OUT OF YOUR CAMERA  
Your digital movie camera can not only record video clips, you can also take  
still photos and make audio recordings. For example, you can snap a still image  
while shooting a video clip, or make just an audio recording. In addition, by  
using the supplied docking station, its easy to hook up your camera to a TV or  
computer.  
Shooting video clips (page 47)  
You expect your camera to record great quality still photos, but you can  
record 640x480-pixel video clips as well. The maximum 30-frames-per-  
second shooting speed guarantees beautiful, flowing movies for you to  
enjoy. Another bonus is the capability to record small file sizes that are  
perfect for uploading to Internet websites.  
Capture still shots while recording a video clip  
(page 49)  
Suppose that while youre recording a video clip, theres a scene youd like  
to keep as a still photo. Your camera makes it possible to record the still  
photo without interrupting the video clip recording.  
27 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Twin menus for easy operation (page 42)  
The novice photographer will have no problem taking beautiful pictures,  
thanks to the BASIC mode easy menu. All the settings necessary to cap-  
ture the picture you want are easily and quickly set up. Of course, the  
EXPERT mode menu is available for the experienced photographer, pro-  
viding full control over detailed camera settings.  
VIDEO CLIP MPEG4  
640¶480 30fps HQ  
VIDEO CLIP MPEG4  
640¶480 30fps SHQ  
<Example: BASIC Mode  
Shooting Setting Screen>  
<Example: EXPERT Mode  
Shooting Setting Screen>  
English 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING THE MOST OUT OF YOUR CAMERA  
Movable monitor for any shooting angle  
The movable LCD monitor lets you shoot from any angle. Hold the camera  
high to get a great view of a parade, or swivel the monitor around to snap a  
photo of yourself.  
29 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Docking station for easy connection  
ThedockingstationsimplifiesthosecomplicatedconnectionstoyourTVor  
computer. Just set the camera in the docking station, and you can view  
your photos on your TV or computer right away. The remote control unit  
makes it even more convenient.  
Computer  
TV  
English 30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
PARTS NAMES  
Front  
Lens  
Flash  
Monitor unit  
Stereo microphone  
<To open the monitor unit>  
Speaker  
ON/OFF button  
31 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear  
Multi-indicator  
G Lit  
Green: USB interface connection  
(PC connection mode)  
Red: USB interface connection  
(PictBridge mode)  
Charge the flush  
Orange: AV cable connection  
G Flashing  
Green: Power save mode  
Red (long interval): During self-timer  
photography  
Red (short interval): Accessing the card,  
battery charge error  
Main switch  
Still image shooting button  
Video clip recording button  
Zoom switch  
MENU button  
Battery slot cover  
Bottom  
LCD monitor  
SET button  
Strap holder  
Tripod stand hole Docking station terminal  
Card cover  
English 32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS NAMES  
Docking station  
Front  
Docking station terminal  
CAMERA/CHARGE button  
Charging indicator  
Remote control sensor  
Camera indicator  
Rear  
DIGITAL/AV terminal  
DC IN terminal  
Cable adapter  
Docking station terminal  
DIGITAL/AV terminal  
DC IN terminal  
33 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHARGING THE BATTERY PACK  
The battery pack is not charged at the time of purchase and therefore needs to  
be charged before use. In addition, if the battery charge becomes low while you  
are using the camera, it is recommended to recharge it as soon as possible.  
1
Connect the AC adapter/charger to  
a power outlet.  
e Use the supplied power cord for  
connecting.  
2
Insert the battery pack into the AC  
adapter/charger.  
e Set it in the battery slot.  
e Be sure the battery pack is  
correctly oriented when setting it in  
the charger.  
e Charging begins. During charging,  
the charging indicator lights red.  
e When the battery pack is  
completely charged, the charging  
indicator turns off.  
e Charging will take approximately  
90 minutes.  
3
When the battery pack is fully  
charged, remove it from the AC  
adapter/charger.  
e After removing the battery pack,  
unplug the power cord from the  
power outlet.  
English 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLING THE BATTERY PACK AND CARD  
The card can be used after it has been formatted with the camera (page 122).  
Make sure that the battery pack polarity (+ and ) and the card orientation are  
correct.  
Install the battery pack  
1
Open the battery cover on the side.  
e Open the battery cover by lightly  
pressing it and sliding it towards  
the rear.  
2
Insert the battery pack.  
e Firmly push it all the way in.  
e Match the [I] mark on the battery  
with the [I] mark on the camera.  
<To remove the battery pack>  
e Raise the battery pack and pull it  
out.  
35 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Close the battery cover.  
e Match the [I] marks, and slide the  
cover towards the front to close it.  
e At the time of purchase the battery  
pack is not charged. Be sure to  
install a fully charged battery pack  
in the camera (page 34).  
Install the card  
1
Open the card cover on the bottom  
of the camera.  
2
Insert the card.  
e Firmly insert the card until it clicks  
into place.  
e To remove the card, press it down,  
and then release. The card will  
protrude slightly, and you can then  
pull it out.  
3
Close the card cover.  
CAUTION  
e Do not attempt to forcefully remove the card.  
English 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TURNING THE POWER ON AND OFF  
Turning on the camera  
Main switch  
1
Set the main switch.  
To shoot pictures:  
Set to [REC].  
Monitor unit  
To play back images:  
Set the [PLAY].  
2
3
Open the monitor unit.  
Press the ON/OFF button for about  
1 second.  
e The camera turns on, and an  
image appears on the LCD  
monitor.  
LCD monitor  
ON/OFF button  
37 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning on the camera when the power save  
(sleep) function is active  
In order to preserve battery pack power, the power save (sleep) function will  
automatically turn off the camera after one minute of no use during shooting, or  
five minutes of no use during playback (factory-preset setting).  
e When the power save function is active, you can restore the power by any of  
the following methods:  
Move the main switch.  
Press the ON/OFF button.  
Press the MENU button.  
Press the SET button.  
e After the power save function has been active for about 1 hour, the camera  
will switch to the standby mode. In this case, you can restore the power by  
pressing the ON/OFF button, or by closing and then opening the monitor  
unit.  
e When the AC adapter/charger is connected, the power save function will  
become active about 10 minutes after the camera is turned on (factory-  
preset setting).  
e When the camera is connected to a computer or printer, it does not change  
to the power save mode. In this case, the power save function becomes  
active after about 12 hours.  
e The user can specify the time elapsed before the power save function is  
activated (page 119).  
e When the camera is connected to a computer or printer, it does not change  
to the power save mode. In this case, the power save function becomes  
active after about 12 hours.  
English 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TURNING THE POWER ON AND OFF  
Turning off the camera  
1
Press the ON/OFF button for about  
1 second.  
e The camera turns off.  
HINT  
To immediately activate the power save function  
e Press the ON/OFF button briefly to active the power save function.  
About the standby mode  
e To turn off the camera only briefly, you can close the monitor unit to put the  
camera in the standby mode. The standby mode uses almost no power.  
When the monitor unit is opened again, the camera turns on immediately  
and you are ready to shoot or view images without any delay.  
Note  
If the } icon appears...  
e When a picture is taken, the date and time it was captured is recorded with it.  
When the date and time cannot be recorded with the image because the  
date and time have not yet been set (page 114), the } icon appears. To  
have the date and time recorded with images, please make this setting  
before capturing images.  
39 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION BUTTONS  
The procedures to change the camera settings, choose images, etc., are  
performed by using the SET button to control the LCD monitor display. This  
operation is used very frequently, so it is best to become familiar with it right  
away.  
1
2
Turn on the camera (page 37).  
Press the MENU button.  
e The Menu Screen appears.  
<Select the icon above or below>  
SET button  
To select the icon above,  
toggle the SET button up.  
MENU button  
VIDEO CLIP MPEG4  
640¶480 30fps HQ  
PHOTO RESOLUTION  
2048¶1536 (3.2M)  
To select the icon below,  
toggle the SET button down.  
SCENE SELECT  
FULL AUTO  
English 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION BUTTONS  
<Select the icon to the left or right>  
To select the icon to the right, toggle  
the SET button to the right.  
VIDEO CLIP MPEG4  
320¶240 30fps  
To select the icon to the left, toggle  
the SET button to the left.  
VIDEO CLIP MPEG4  
320¶240 30fps  
<Actuate the selected icon>  
Press the SET button. The selected  
icon moves to the left end of the  
lineup.  
VIDEO CLIP MPEG4  
320¶240 30fps  
41 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SWITCHING THE MENU MODE  
Switch from the BASIC mode menu to the EXPERT mode menu, or vice versa,  
depending on how you wish to use your camera.  
1
2
Turn on the camera (page 37).  
Press the MENU button.  
e The Menu Screen (the Shooting  
Setting Screen or the Playback  
Setting Screen) appears.  
VIDEO CLIP MPEG4  
640¶480 30fps HQ  
<Example: BASIC Mode  
Shooting Setting Screen>  
PLAYBACK METHOD  
Set play all or 1  
clip  
<Example: BASIC Mode  
Playback Setting Screen>  
English 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SWITCHING THE MENU MODE  
3
Toggle the SET button to the left.  
e The screen to select the menu  
mode appears.  
:
:
<Example: Shooting mode>  
4
Toggle the SET button to the left  
again.  
e The menu mode switches from one  
VIDEO CLIP MPEG4  
640¶480 30fps SHQ  
mode to the other.  
<Example: EXPERT Mode  
Shooting Setting Screen>  
PLAYBACK METHOD  
Set play all or 1  
clip  
<Example: EXPERT Mode  
Playback Setting Screen>  
43 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE TAKING PICTURES  
For best results  
Hold the camera securely, keeping your elbow close to your body and  
making sure the camera is stable.  
Correct hold  
Incorrect hold  
A finger is blocking  
the lens or flash.  
Make sure that the lens and flash are not blocked by your fingers or the  
handstrap.  
HINT  
e Images captured in the still image shooting mode can be rotated when they  
are played back (page 89). Note that video clips cannot be rotated while they  
are being played back.  
e When the still image shooting button is pressed halfway, the image in the  
LCD monitor may waver vertically. This is the result of internal image  
processing and is not a malfunction. This wavering is not recorded and will  
not affect your images in any way.  
e When the optical zoom is used or when the autofocus is operating, the image  
may appear to waver, but this is not a malfunction.  
English 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE TAKING PICTURES  
Using the autofocus  
The autofocus will work in almost all situations; however, there are  
certain conditions that may cause the autofocus function to not work  
properly. If the autofocus function is not working properly, set the focus  
range to capture images (page 82).  
i Conditions that may cause incorrect focus  
The following examples are some of the situations where the autofocus  
function may not work.  
e Subjects with low contrast, very  
bright subjects at the center of  
the image or dark subjects or  
locations  
Use the focus-lock function to lock  
the focus on an object with contrast  
at the same distance as the  
desired subject.  
e Subjects without vertical lines  
Use the focus-lock function to lock  
the focus on the subject while  
holding the camera vertically.  
The following examples are some of the situations where the autofocus  
function may work, but not as desired.  
e When both near and far objects  
are present  
Use the focus-lock function to lock  
the focus on an object at the same  
distance as the desired subject,  
then reposition the camera to  
compose the picture.  
45 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
e Fast-moving subjects  
Use the focus-lock function to lock  
the focus on an object at the same  
distance as the desired subject,  
then reposition the camera to  
compose the picture.  
Hints for taking pictures  
Muting the operation sounds  
e The operation sounds that are generated, for example, when the still image  
shooting button, MENU button or SET button is pressed, as well as the audio  
guidance when you switch the mode, can be muted (page 108).  
Where is the image and audio data saved?  
e All the image and sound data is recorded on the card installed in the camera.  
Taking pictures in backlight conditions...  
e When taking pictures with the light coming from behind the subject, due to  
the characteristics of the lens, light lines or ghost patterns (flare  
phenomenon) may appear in the captured image. In this situation, it is  
recommended that you avoid taking pictures with the subject lit from behind.  
While the image data is being recorded...  
e The multi-indicator will light red while the image is being written to the  
memory. Another image can be captured only after the red light turns off.  
However, even when the multi-indicator is lit red, depending on the cameras  
internal memory remaining capacity, in some cases the next image can be  
captured about 2 seconds after shooting.  
English 46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC MODE  
SHOOTING  
CAPTURING IMAGES  
Recording video clips  
1
2
3
Turn on the camera (page 37).  
Set the main switch to REC.  
Main switch  
Press the video clip recording  
button [l] to start recording.  
e Recording begins. During shooting,  
X appears in the LCD monitor.  
e It is not necessary to continue  
pressing the video clip recording  
button while shooting.  
Video clip recording button  
00:00:15  
4
End the recording.  
e Press the video clip recording  
button again to stop recording.  
Note  
Focus lock during video clip recording  
e The autofocus can be set to a fixed focus during video clip recording if you  
toggle the SET button up. When the autofocus is fixed, the p icon appears  
on the LCD monitor.  
47 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Capturing still images  
1
2
3
Turn on the camera (page 37).  
Main switch  
Set the main switch to REC.  
Press the still image shooting  
button [S] to capture the image.  
1 Press the still image shooting  
button halfway.  
e The autofocus operates, and the  
image is focused (focus lock).  
Still image shooting button  
2 Continue to gently press the still  
image shooting button all the  
way.  
e The shutter releases and the image  
e You can view the captured image  
on the LCD monitor by keeping the  
still image shooting button  
depressed when you capture the  
image.  
is captured.  
Target mark  
English 48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAPTURING IMAGES  
Shoot a still image while recording a video clip  
You can capture a still image while you are recording a video clip.  
Main switch  
1
Turn on the camera (page 37).  
Set the main switch to REC.  
2
3
Press the video clip recording  
button [l] to begin recording.  
Still image shooting  
button  
Video clip recording  
button  
4
5
When you see a scene you'd like to  
capture as a still image, press the  
still image shooting button [S].  
01:25  
End the recording.  
e Press the video clip recording  
button to stop recording.  
49 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
About the target mark  
e The target mark indicates the position which is currently focused. If the target  
mark does not appear, or if it appears at a position that is different from the  
point you wish to focus, you can refocus, for example, by changing the  
shooting angle.  
e The large target mark appears when the camera focuses on a wide area in  
the center of the screen.  
HINT  
Shoot a still image while recording a video clip  
e If you press the still image shooting button while recording a video clip, the  
frame is also saved as a still image. Note, however, that in this case the flash  
will not operate.  
e If the still image resolution is set to a setting other than [, and you press  
the still image shooting button while recording a video clip, the displayed  
image stops briefly and then returns to video clip recording after the still  
image is captured.  
Note  
e The data for a video clip is very large. Therefore, be aware that if the video  
clip is uploaded to a computer to be played back, the computer may not be  
able to play back the video fast enough, making it appear jerky. (The video  
will always be displayed properly on the LCD monitor or a television.)  
e Depending on the card, shooting may end even before the possible shooting  
time indicated on page 167.  
English 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAPTURING IMAGES  
AUDIO RECORDING  
You can make audio recordings with your camera.  
1
2
Select the audio recording icon <  
from the recording mode menu,  
and press the SET button.  
e The camera changes to the audio  
recording mode.  
Press the video clip recording  
00:00:16  
button [l].  
e Recording begins.  
e To end the recording. press the  
video clip recording button again.  
<Screen during audio  
recording>  
51 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT THE BASIC MODE SHOOTING SETTING  
SCREEN  
For shooting in the BASIC mode, you can change the video clip image quality  
and still image resolution settings, as well as modify the shooting settings for  
various functions. These settings are performed on the BASIC Mode Shooting  
Setting Screen.  
Display the BASIC Mode Shooting Setting  
Screen  
1
2
Turn on the camera (page 37).  
Main switch  
Set the main switch to REC.  
3
4
Press the MENU button.  
e The Menu Screen appears.  
MENU button  
Set the camera to the BASIC mode  
(page 42)  
e The BASIC Mode Shooting Setting  
e To cancel the BASIC Mode  
Shooting Setting Screen, press the  
MENU button.  
Screen appears.  
VIDEO CLIP MPEG4  
640¶480 30fps HQ  
English 52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT THE BASIC MODE SHOOTING SETTING SCREEN  
BASIC Mode Shooting Setting Screen  
8
VIDEO CLIP MPEG4  
9
640¶480 30fps HQ  
F
.................  
1
............................ 2  
...........  
3
............  
4
.............................  
5
.............................  
6
.........................................  
7
53 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Video clip menu (page 55)  
5 Flash menu (page 60)  
8: Record at 640 x 480 pixels,  
30 frames per second  
9: 320 x 240 pixels, 30 frames  
per second  
k: Automatic flash mode  
m: Forced flash mode  
l: Flash off mode  
6 Self-timer menu (page 62)  
<: 320 x 240 pixels, 15 frames  
=: 176 x 144 pixels, 15 frames  
per second  
N: Self-timer off  
per second  
y: Self-timer on (2 seconds)  
x: Self-timer on (10 seconds)  
7 Option icon (page 105)  
<: Make an audio recording  
2 Photo resolution menu (page  
56)  
Displays the Option Setting  
Screen.  
8 Menu mode display (page 42)  
9 Help display (page 107)  
F Remaining battery power (page  
126)  
Y: 2048 x 1536-pixel resolution  
icon (3,200,000 pixels)  
Z: 1600 x 1200-pixel resolution  
icon (2,000,000 pixels)  
[: 640 x 480-pixel resolution  
icon (300,000 pixels)  
3 Scene select menu (page 58)  
=: Full auto icon  
a: Sports icon  
>: Portrait icon  
+: Landscape icon  
/: Night view icon  
Q: Lamp icon  
4 Filter menu (page 59)  
&: No filter  
%: Cosmetic filter on  
5: Slim filter on  
W: Monochrome filter on  
3: Sepia filter on  
(: Ghost filter on  
e When you specify multiple functions that cannot be simultaneously  
enabled, the function which was last set becomes the active setting, and  
the other settings accordingly change automatically.  
English 54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING THE SHOOTING SETTINGS  
In the BASIC mode, you can change the monitor brightness, the video clip  
image quality and the still image resolution settings.  
Video clip image quality setting  
When it comes to video clips, a larger number of pixels and a higher the  
frame rate means better image quality and smoother playback. On the  
other hand, the file size becomes large and uses more memory. Set the  
image quality to a setting thats right for your purpose, whether for home  
viewing on a TV or for showing on the Internet, for example.  
1
Display the BASIC Mode Shooting  
Setting Screen (page 52), and  
select the video clip menu.  
VIDEO CLIP MPEG4  
640¶480 30fps HQ  
8 : Record at 640 x 480 pixels, 30  
frames per second  
9 : Record at 320 x 240 pixels, 30  
frames per second  
< : Record at 320 x 240 pixels, 15  
frames per second  
= : Record at 176 x 144 pixels, 15  
frames per second  
< : Make an audio recording  
2
Select the desired icon from the  
video clip menu, and press the SET  
button.  
e This completes the video clip  
image quality setting.  
55 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Still image resolution setting  
By setting the still image resolution (pixels) to a higher setting, image  
detail is enhanced for a smoother, finer picture. However, the file size  
also becomes large and uses more memory. Select the resolution setting  
that suits your purpose.  
1
Display the BASIC Mode Shooting  
Setting Screen (page 52), and  
select the photo resolution menu.  
PHOTO RESOLUTION  
2048¶1536 (3.2M)  
Y : 2048 x 1536-pixel resolution  
(3.2M)  
Z : 1600 x 1200-pixel resolution  
(2M)  
[ : 640 x 480-pixel resolution  
(0.3M)  
The numbers in parentheses ( ) refer  
to the approximate number of pixels in  
the image (units: megapixels).  
2
Select the desired icon from the  
photo resolution menu, and press  
the SET button.  
e This completes the still image  
resolution setting.  
English 56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING THE SHOOTING SETTINGS  
Adjusting the brightness of the LCD monitor  
(when shooting)  
The brightness of the LCD monitor during shooting can be adjusted.  
Adjust the brightness when it is difficult to see the LCD monitor image  
due to ambient lighting. In addition, in very bright surroundings, such as  
outdoors on a sunny day, you can turn the backlight OFF to preserve  
battery power.  
LCD BRIGHTNESS  
1
With the Shooting Setting Screen  
not shown, toggle the SET button  
down for at least 1 second.  
LCD BACKLIGHT  
e The Monitor Brightness Screen  
ON  
appears.  
OFF  
e You can also access the Monitor  
Brightness Screen from the  
Shooting Screen by pressing and  
holding the SET button  
downwards.  
ADJUST  
0
2
Toggle the SET button to the left or  
right to adjust the brightness, and  
press the SET button.  
e This completes the LCD monitor  
brightness setting, and you are  
returned to the Shooting Screen.  
57 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER SHOOTING FUNCTIONS  
Scene Select feature  
You can select from various preset settings (aperture, shutter speed, etc.)  
for specific shooting conditions.  
1
Display the BASIC Mode Shooting  
Setting Screen (page 52), and  
select the scene select menu.  
= : The camera makes settings  
suitable for the surrounding  
conditions.  
SCENE SELECT  
FULL AUTO  
a : Capture a split-second image of  
a fast-moving subject.  
> : Enhance the 3D feeling of the  
subject by blurring the  
background.  
+ : For beautiful shots of distant  
scenery.  
/ : Photograph the subject while  
keeping the background night  
scenery.  
Q : Increase the sensitivity when  
taking pictures.  
2
3
Select the desired icon from the scene select menu, and press the  
SET button.  
e This completes the scene select function setting.  
Take the picture.  
For video clip recording, see page 47.  
For still image shooting, see page 48.  
To return to normal photography, select = from the scene select menu,  
and press the SET button.  
English 58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER SHOOTING FUNCTIONS  
Note  
e When capturing images using the lamp Q or night view / setting, use a  
tripod or other method to stabilize the camera.  
Filter feature  
The filter feature changes the aperture and shutter speed settings, as well  
as the color tones, to apply unique effects to the photographed image.  
1
Display the BASIC Mode Shooting  
Setting Screen (page 52), and  
select the filter menu.  
FILTER  
NO  
& : No filter  
% : Skin tones are enhanced in  
close-up shots (cosmetic filter).  
5 : Change the vertical-horizontal  
proportions of the subject (slim  
filter).  
W : Snap black-and-white photos  
(monochrome filter).  
3 : Create a sepia-tone photo (sepia filter).  
( : A radiant effect is added to the subject (ghost filter).  
2
3
Select the desired icon from the filter menu, and press the SET  
button.  
e This completes the filter setting.  
Take the picture.  
For video clip recording, see page 47.  
For still image shooting, see page 48.  
e To return to normal photography, select & from the filter menu, and  
press the SET button.  
59 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the flash  
The flash is used not only for taking pictures where there is insufficient  
light, but also when the subject is in shade or in backlight conditions.  
Your camera has three modes of operation (automatic flash mode, forced  
flash mode, and flash off mode). The flash is available only when  
shooting still images.  
1
Display the BASIC Mode Shooting  
Setting Screen (page 52), and  
select the flash menu.  
FLASH  
AUTO  
k : The camera will detect the  
subject brightness and use the  
flash only when required. In a  
backlight situation, if only the  
center of the image is very dark,  
the flash will operate to  
compensate (auto flash).  
m : The flash will operate with every  
image captured regardless of  
the conditions. Use this setting  
under backlight conditions,  
when the subject is in shade,  
under fluorescent lighting  
conditions, etc. (forced flash).  
l : The flash will not operate even in dark situations. Use this setting  
when capturing an image in a location where flash photography is  
prohibited, or when shooting a night landscape scene (flash off).  
2
Select the desired icon from the flash menu, and press the SET  
button.  
e This completes the flash setting.  
English 60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER SHOOTING FUNCTIONS  
3
Take the picture.  
For video clip recording, see page 47.  
For still image shooting, see page 48.  
e To return to normal photography, select k from the flash menu, and  
press the SET button.  
Using the zoom  
Your camera has two zoom functions: optical zoom and digital zoom.  
Zoom switch  
1
2
Point the camera lens at the  
subject.  
Press [T] or [W] on the zoom switch  
to compose the desired image.  
[T]: Zoom in on the subject.  
[W]: Zoom out.  
e When the zoom switch is pressed,  
the zoom bar appears on the LCD  
monitor.  
LCD monitor  
Zoom bar  
Pointer  
e When the optical zoom factor is at  
maximum, zooming stops  
When both optical  
and digital zoom  
are enabled  
temporarily. When [T] on the zoom  
switch is pressed again, the mode  
changes to the digital zoom mode  
and zooming continues (if digital  
zooming is enabled).  
Optical zoom  
Digital zoom (Yellow)  
When optical zoom  
only is enabled  
3
Take the picture.  
For video clip recording, see page 47.  
For still image shooting, see page 48.  
61 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Self-timer photography  
1
Display the BASIC Mode Shooting  
Setting Screen (page 52), and  
select the self-timer menu.  
SELF-TIMER  
OFF  
N : Turns off the self-timer function.  
y : Turns on the self-timer function.  
The image is captured about 2  
seconds after the video clip  
recording button or still image  
shooting button is pressed.  
x : Turns on the self-timer function.  
The image is captured about 10  
seconds after the video clip  
recording button or still image  
shooting button is pressed.  
2
3
Select the desired icon from the  
self-timer menu, and press the SET  
button.  
This completes the self-timer setting.  
Take the picture.  
For video clip recording, see page 47.  
For still image shooting, see page 48.  
English 62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER SHOOTING FUNCTIONS  
HINT  
To pause or cancel the self-timer function...  
e If the video clip recording button or still image shooting button is pressed  
again before the image is captured, the self-timer countdown temporarily  
stops. Press the video clip recording button or still image shooting button one  
more time to restart the self-timer.  
e To cancel self-timer photography, select the N icon from the self-timer  
menu, and press the SET button.  
When x is selected...  
e When the video clip recording button or  
still image shooting button is pressed,  
the illumination light and the multi-  
indicator will blink for about 10  
seconds, and then the image is  
captured. Also, 4 seconds before the  
shutter releases, the indication below  
appears on the LCD monitor.  
e If you swivel the monitor unit towards,  
the self-timer indication will be visible to  
the subject.  
63 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK  
VIEWING IMAGES  
Main switch  
1
Turn on the camera (page 37), and  
set the main switch to PLAY.  
e If the main switch is set to PLAY  
after a video clip was recorded, the  
last recorded video clip is  
displayed.  
e If the main switch is set to PLAY  
after a still image was captured, the  
last recorded still image is  
displayed.  
SET button  
2
3
Select the image you wish to view.  
To display the previous image, toggle  
the SET button to the left.  
To display the next image, toggle the  
SET button to the right.  
JOG  
<Example: After video clip  
recording>  
Play back a video clip.  
Follow these steps to play back a  
video clip.  
Normal playback  
e Press the SET button.  
Pause  
e While the video clip is playing,  
toggle the SET button up. To  
resume playback, press the SET  
button.  
<Example: After still image  
shooting>  
English 64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIEWING IMAGES  
To play back one image at a time (single-frame step)  
e During forward playback  
After pausing playback, toggle the SET button to the right.  
For slow playback, press and hold the SET button to the right.  
e During reverse playback  
After pausing playback, toggle the SET button to the left.  
For slow reverse playback, press and hold the SET button to the left.  
To accelerate playback  
e 15x fast forward playback  
During normal playback, toggle the SET button to the right.  
e 30x fast forward playback  
During 15x playback, toggle the SET button to the right.  
d
During fast forward playback, the audio is not heard.  
If you toggle the SET button to the left, the images are played back in  
reverse (the audio is not played back).  
d
e Return to normal playback speed  
Press the SET button.  
JOG playback  
JOG playback lets you display the previous frame or next frame, as well  
as search for a particular frame during playback.  
1
In the video clip playback stop or  
pause mode, toggle the SET button  
up.  
e The JOG Playback Screen  
appears.  
Fast forward:  
Toggle the SET button to the right.  
Rewind:  
Toggle the SET button to the left.  
Playback:  
Press the SET button.  
Position of currently displayed  
frame  
2
Toggle the SET button down.  
e You are returned to the Playback  
Screen.  
65 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Convenient 9-image display playback  
1
Turn on the camera (page 37), and  
set the main switch to PLAY.  
e If the main switch is set to PLAY  
after a video clip was recorded, the  
last recorded video clip is  
displayed.  
e If the main switch is set to PLAY  
after a still image was captured, the  
last recorded still image is  
displayed.  
Zoom switch  
Main switch  
2
3
Press [W] (P) on the zoom  
switch.  
e The 9-image display appears.  
Select the image to play back.  
e Toggle the SET button up, down,  
left or right to move the orange  
frame to the desired image, and  
press the SET button.  
SET button  
Video clip  
Orange frame  
Still image  
Instead of pressing the SET button,  
you can press [T] ([]]) on the  
zoom switch to show the image full  
screen.  
100  
0001  
0002  
0005  
0008  
0003  
0006  
0009  
0004  
0007  
Audio data  
Image number  
Folder number  
Note  
e The 9-image multi-playback display can also be accessed by selecting P  
on the BASIC Mode Playback Setting Screen.  
English 66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIEWING IMAGES  
Audio data playback  
A { mark indicates an image for  
which audio data was also recorded.  
Playback  
Press the SET button.  
Pause  
During playback, toggle the SET  
button up.  
Stop playback  
During playback, toggle the SET  
button down.  
Magnifying (zooming in) the image  
Magnification indication  
1
Display the image that you want to  
magnify.  
ZOOM  
117%  
e For a video clip, pause playback at  
the place you want to magnify.  
2
Press [T] ([]]) on the zoom  
e Magnification is enabled.  
e The image is magnified, and the  
central portion of image is  
displayed.  
ZOOM I/O  
MOVE  
switch.  
SHUTTER FOR SAVE  
e Toggle the SET button to view different parts of the magnified image.  
To magnify:  
Press [T] ([]]) on the zoom switch.  
To return to normal size:  
Press [W] ([P]) on the zoom switch.  
HINT  
The magnified portion of the image can be saved as a separate image.  
e Press the still image shooting button. The magnified portion is saved as a  
new still image.  
67 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT THE BASIC MODE PLAYBACK SETTING  
SCREEN  
The BASIC mode playback settings are performed on the BASIC Mode  
Playback Setting Screen.  
Display the BASIC Mode Playback Setting  
Screen  
Main switch  
1
2
3
Turn on the camera (page 37).  
Set the main switch to PLAY.  
Press the MENU button.  
e The Menu Screen appears.  
MENU button  
4
Set the camera to the BASIC mode  
(page 42)  
PLAYBACK METHOD  
e The BASIC Mode Playback Setting  
Set play all or 1  
clip  
Screen appears.  
e To cancel the BASIC Mode  
Playback Setting Screen, press the  
MENU button.  
English 68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT THE BASIC MODE PLAYBACK SETTING SCREEN  
BASIC Mode Playback Setting Screen  
8
1
2
PLAYBACK METHOD  
3
4
5
6
Set play all or 1  
clip  
9
7
F
1 Playback method setting (page 70)  
e Select continuous playback or single-frame playback.  
2 Multi-playback (page 66)  
e Display images in the 9-frame multi-display format.  
3 Volume control (page 71)  
e Adjust the playback volume for video clips and audio data.  
4 Monitor brightness (page 72)  
e Adjust the brightness of the LCD monitor backlight.  
5 Data protect setting (page 73)  
e Protect data from accidental erasure.  
6 Erase (page 75)  
e Delete images from the card memory.  
7 Option icon (page 105)  
e Displays the Option Setting Screen.  
8 Menu mode display (page 42)  
9 Help display (page 107)  
F Remaining battery power (page 126)  
69 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER PLAYBACK FUNCTIONS  
Playback mode  
Images can be viewed continuously (slideshow playback) or you can  
choose to show single images.  
1
2
Display the BASIC Mode Playback  
Setting Screen (page 68).  
PLAYBACK METHOD  
DURATION OF PHOTO  
Select the playback method icon  
4, and press the SET button.  
e The Playback Mode Screen  
PLAY ALL  
1 CLIP  
1SEC  
appears.  
1 CLIP:  
Display only the selected image.  
PLAY ALL:  
Play back images in slideshow  
fashion.  
PLAYBACK METHOD  
3
Select the desired playback mode,  
and press the SET button.  
DURATION OF PHOTO  
<PLAY ALL>  
PLAY ALL  
1SEC  
e The screen to set the time that  
each image is displayed appears.  
1 Toggle the SET button up or down  
to specify the time that each image  
is shown.  
2 Press the SET button.  
e The display time is set, and you are  
returned to the BASIC Mode  
Playback Setting Screen.  
<1 CLIP>  
e The camera is set to display only  
the image you select, and you are  
returned to the BASIC Mode  
Playback Setting Screen.  
English 70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER PLAYBACK FUNCTIONS  
Volume control  
Adjust the volume of video clip and audio data playback.  
1
2
Display the BASIC Mode Playback  
Setting Screen (page 68).  
VOLUME  
Select the volume icon Z, and  
press the SET button.  
e The volume control bar appears.  
VOLUME SETTING  
3
Toggle the SET button left or right  
to set to the desired volume, and  
press the SET button.  
1
71 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor brightness (playback)  
Adjust the brightness of the cameras LCD monitor display during  
playback. Use this adjustment when the monitor image is difficult to view  
because of ambient lighting.  
In addition, in very bright surroundings, such as outdoors on a sunny  
day, you can turn the backlight OFF to preserve battery power.  
1
2
Display the BASIC Mode Playback  
Setting Screen (page 68).  
LCD BRIGHTNESS  
Select the LCD brightness icon  
r, and press the SET button.  
e The brightness control bar  
e You can also access the Monitor  
Brightness Screen from the  
Shooting Screen by pressing and  
holding the SET button  
downwards.  
LCD BACKLIGHT  
appears.  
ON  
OFF  
ADJUST  
0
3
Toggle the SET button left or right  
to adjust the LCD monitor  
brightness, and press the SET  
button.  
e The brightness is set, and you are  
returned to the BASIC Mode  
Playback Setting Screen.  
English 72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER PLAYBACK FUNCTIONS  
Image protect mode  
(prevent accidental erasure)  
1
2
Display the data that you want to  
protect from accidental erasure,  
and display the BASIC Mode  
Playback Setting Screen (page 68).  
PROTECT  
Select the protect icon A, and  
press the SET button.  
e LOCK?appears.  
LOCK?  
e If the protect mode has already  
been enabled for the data, then  
UNLOCK?appears.  
YES  
EXIT  
PROTECT  
3
Toggle the SET button up or down  
to select YES, and press the SET  
button.  
UNLOCK?  
e The protect mode is set for the  
e The protect mark B indicates  
that the data is locked.  
data.  
YES  
EXIT  
e To return to the BASIC Mode  
Playback Setting Screen, press the  
MENU button.  
73 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
e Even if the protect mode is set for certain data files, they will be erased if the  
card is reformatted.  
HINT  
To select a different image in steps 2 and 3...  
e Toggle the SET button to the left or right.  
To cancel the protect mode for an image...  
e Display the desired data and repeat steps 1 to 3. The protect mark B will  
disappear and the protect mode is canceled.  
English 74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER PLAYBACK FUNCTIONS  
Erasing data  
You can erase data that is stored on the card if you no longer need it. You  
can erase the data one at a time, or all at once.  
1
2
Display the BASIC Mode Playback  
Setting Screen (page 68).  
ERASE  
Select the erase icon c, and  
press the SET button.  
ONE ERASE  
ERASE ALL  
EXIT  
e The Erase Mode Screen appears.  
ONE ERASE:  
Erases one data at a time.  
ERASE ALL:  
Erases all the data from the card.  
EXIT:  
Returns to the BASIC Mode  
Playback Setting Screen.  
3
Toggle the SET button up or down to select the erase mode, and  
press the SET button.  
e The Erase Confirmation Screen appears.  
<ONE ERASE>  
e Toggle the SET button to the left or right to select the data you wish to  
erase.  
<ERASE ALL>  
e Toggle the SET button to the left or right confirm the data to erase.  
75 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Toggle the SET button up or down to select YES, and press the  
SET button.  
<ONE ERASE>  
e The currently displayed image is deleted.  
e To erase other data, select the data, and press the SET button.  
e To return to the BASIC Mode Playback Setting Screen, press the  
MENU button.  
<ERASE ALL>  
e The Erase Confirmation Screen again appears. To erase the data,  
select YES, and press the SET button. When data erase is  
completed, NO IMAGEis shown.  
CAUTION  
e Data which is protected from accidental erase cannot be erased. To erase  
protected data, set the protect setting for the data to off (page 73), and then  
follow the data erase procedure.  
English 76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER PLAYBACK FUNCTIONS  
Displaying image data (Information Screen)  
On the Information Screen you can check what the settings were when an  
image was captured.  
1
2
Display the desired image.  
INFO  
100-0002  
328KB  
3
4
Press the MENU button for at about  
2 seconds.  
e The Playback Information Screen  
1
2
640¶480  
MPEG4  
5
6
appears.  
00:00:06  
UNUSED MEMORY 78%  
e If the MENU button is pressed  
again, the Playback Information  
Screen is exited.  
7
2003.12.25 19:30  
8
1 Video clip mode settings  
2 Remaining card memory  
3 Image or sound number  
4 Protect setting  
<Video clip playback mode>  
INFO  
100-0001  
3
4
5 File size  
9
2
2048×1536  
986KB  
5
7
6 Shooting or recording time  
7 Remaining battery charge  
8 Date and time of image  
9 Photo resolution setting  
UNUSED MEMORY 78%  
2003.12.25 19:30  
8
<Still image playback mode>  
INFO  
100-0004  
3
4
96KB  
5
6
2
AAC  
00:00:03  
UNUSED MEMORY 21%  
7
2003.12.25 19:30  
8
<Audio data playback mode>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
77 English  
EXPERT MODE  
SHOOTING  
ABOUT THE EXPERT MODE SHOOTING  
SETTING SCREEN  
Compared to the BASIC mode, the EXPERT mode allows you much more  
control over the various shooting settings. These settings are performed on the  
EXPERT Mode Shooting Setting Screen.  
Display the EXPERT Mode Shooting Setting  
Screen  
Main switch  
1
2
3
Turn on the camera (page 37).  
Set the main switch to REC.  
Press the MENU button.  
e The Menu Screen appears.  
MENU button  
4
Set the camera to the EXPERT  
mode (page 42)  
e The EXPERT Mode Shooting  
e To cancel the EXPERT Mode  
Shooting Setting Screen, press the  
MENU button.  
Setting Screen appears.  
VIDEO CLIP MPEG4  
640¶480 30fps SHQ  
English 78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT THE EXPERT MODE SHOOTING SETTING SCREEN  
EXPERT Mode Shooting Setting Screen  
H
VIDEO CLIP MPEG4  
I
640¶480 30fps SHQ  
J
..............................  
1
..............................  
..............................  
..............................  
..............................  
..............................  
..............................  
...................................  
..............................  
..............................  
.........................................  
2
3
4
5
6
7
8
9
F
G
79 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Video clip menu (page 81)  
6 Self-timer menu (page 62)  
:: 640 x 480 pixels, 30 frames  
per second, low compression  
8: 640 x 480 pixels, 30 frames  
per second  
N: Self-timer off  
y: Self-timer on (2 seconds)  
x: Self-timer on (10 seconds)  
7 Focus menu (Page 82)  
9: 320 x 240 pixels, 30 frames  
<: 320 x 240 pixels, 15 frames  
per second  
-: Wide end: 10 cm to infinity  
Tele end: 80 cm to infinity  
*: 80 cm to infinity  
+: 2 cm to 60 cm  
per second  
=: 176 x 144 pixels, 15 frames  
8 Flicker-reduction menu (page  
83)  
per second  
2 Photo resolution menu (page  
56)  
p: Flicker-reduction function off  
icon.  
Y: 2048 x 1536-pixel resolution  
o: Flicker-reduction function on  
icon.  
icon (3,200,000 pixels)  
Z: 1600 x 1200-pixel resolution  
icon (2,000,000 pixels)  
9 ISO sensitivity menu (Page 84)  
t: Auto sensitivity (ISO50 to  
200)  
[: 640 x 480-pixel resolution  
icon (300,000 pixels)  
*: ISO50 icon.  
3 Scene select menu (page 58)  
=: Full auto icon  
a: Sports icon  
u: ISO100 icon.  
v: ISO200 icon.  
w: ISO400 icon.  
F White balance menu (page 85)  
>: Portrait icon  
+: Landscape icon  
/: Night view icon  
Q: Lamp icon  
>: Auto white balance icon.  
r: Sunny icon.  
o: Cloudy icon.  
p: Fluorescent lighting icon.  
q: White (incandescent) light  
icon.  
G Option icon (page 105)  
e Displays the Option Setting  
Screen.  
H Menu mode display (page 42)  
I Help display (page 107)  
J Remaining battery power (page  
126)  
4 Filter menu (page 59)  
&: No filter  
%: Cosmetic filter on  
5: Slim filter on  
W: Monochrome filter on  
3: Sepia filter on  
(: Ghost filter on  
5 Flash menu (page 60)  
k: Automatic flash mode  
m: Forced flash mode  
l: Flash off mode  
e When you specify multiple functions that cannot be simultaneously  
enabled, the function which was last set becomes the active setting, and  
the other settings accordingly change automatically.  
English 80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO IMAGE QUALITY  
For high image quality and smooth video clip playback, a larger number of  
pixels and high frame rate is selected. A lower compression rate setting  
produces even more beautiful images. However, the file size becomes large  
and uses more memory, set the image quality to a setting thats right for your  
purpose.  
1
Display the EXPERT Mode  
Shooting Setting Screen (page 78),  
and select the video clip menu.  
VIDEO CLIP MPEG4  
640¶480 30fps SHQ  
: : Record at 640 x 480 pixels, 30  
frames per second, low  
compression  
8 : Record at 640 x 480 pixels, 30  
frames per second  
9 : Record at 320 x 240 pixels, 30  
frames per second  
< : Record at 320 x 240 pixels, 15  
frames per second  
= : Record at 176 x 144 pixels, 15  
frames per second  
2
Select the desired icon from the  
video clip menu, and press the SET  
button.  
e This completes the video clip  
image quality setting.  
81 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOCUS  
1
Display the EXPERT Mode  
Shooting Setting Screen (page 78),  
and select the focus menu.  
FOCUS  
TOTAL RANGE  
e When shooting a subject at a  
medium to far distance, by setting  
the focus range to *, you will find  
it both easier and faster to focus.  
- : Wide end: 10 cm to infinity  
Tele end: 80 cm to infinity  
(Total)  
* : 80 cm to infinity (Normal)  
+ : 2 cm to 60 cm (Super Macro)  
2
Select the desired icon from the focus menu, and press the SET  
button.  
e This completes the focus range setting.  
Note  
About the scene select function and focus range settings  
e The scene select function changes to = when the focus range is set to  
* or +.  
e Even if you set the focus range to * or +, it changes to - when the  
scene select function is set to anything other than =.  
About focus range in the BASIC mode  
e In the BASIC mode, the focus range setting is automatically set to -.  
When the distance between the camera and the subject is short, the focus  
range automatically changes to the macro setting.  
English 82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FLICKER-REDUCTION FUNCTION  
The flicker-reduction setting reduces the flicker that results when filming video  
clips under fluorescent lights and the like where the background lighting  
pulsates at the frequency of the power supply. The flicker-reduction setting is  
set for a frequency of 50 Hz.  
1
Display the EXPERT Mode  
Shooting Setting Screen (page 78),  
and select the flicker-reduction  
menu.  
FLICKER REDUCT  
OFF  
p : Turns off the flicker-reduction  
setting.  
o : Turns on the flicker-reduction  
setting.  
2
Select the o icon from the flicker-  
reduction menu, and press the SET  
button.  
e This completes the flicker-  
reduction setting.  
HINT  
e If the flicker-reduction setting is used outdoors on a very bright day, a  
halation effect may occur.  
83 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ISO SENSITIVITY  
With the initial settings, the ISO sensitivity is automatically set according to the  
brightness of the subject. However, the ISO sensitivity can be set to a fixed  
setting.  
1
Display the EXPERT Mode  
Shooting Setting Screen (page 78),  
and select the ISO sensitivity  
menu.  
ISO  
AUTO  
t : Sets the ISO sensitivity  
automatically (equivalent to  
ISO50 to 200 (Video clip  
shooting mode: ISO200 to  
800)).  
* : Sets the sensitivity to ISO50  
equivalent (Video clip shooting  
mode: ISO200).  
u : Sets the sensitivity to ISO100 equivalent (Video clip shooting mode:  
ISO400).  
v : Sets the sensitivity to ISO200 equivalent (Video clip shooting mode:  
ISO800).  
w : Sets the sensitivity to ISO400 equivalent (Video clip shooting mode:  
ISO1600).  
2
Select the desired icon from the  
ISO sensitivity menu and press the  
SET button.  
e This completes the ISO sensitivity  
setting.  
HINT  
e By setting a higher ISO sensitivity, you can set higher shutter speeds and  
capture images in darker locations, but noise in the captured images may  
increase.  
English 84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WHITE BALANCE SETTING  
This camera automatically adjusts the white balance under most lighting  
conditions. However, if you want to specify the lighting conditions or change the  
overall tone of the image, the white balance can be manually set.  
1
Display the EXPERT Mode  
Shooting Setting Screen (page 78),  
and select the white balance menu.  
WHITE BALANCE  
AUTO  
> : The camera will make the white  
balance adjustment  
automatically based on the  
natural and artificial light  
conditions. This is the setting  
used in the auto mode.  
r : For shooting outside on a sunny  
day.  
o : For shooting outside on a  
cloudy day.  
p : For shooting inside under  
fluorescent lighting.  
q : For shooting inside under  
incandescent lighting.  
2
Select the desired icon from the  
white balance menu, and press the  
SET button.  
HINT  
To cancel the white balance setting  
e Perform step 1, select >, and then press the SET button.  
85 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPOSURE CORRECTION  
When capturing images, you can make the image lighter or darker.  
MENU button  
Main switch  
1
Set the main switch to REC, and set  
the camera to the EXPERT  
shooting mode (page 78).  
e To exit the EXPERT Mode  
Shooting Setting Screen, press the  
MENU button.  
2
3
When the EXPERT Mode Shooting  
Setting Screen is not shown, toggle  
the SET button to the left or right.  
e The exposure correction bar  
SET button  
appears.  
4
00:11  
Toggle the SET button to the left or  
right to adjust the exposure.  
e To cancel the exposure correction  
bar, press the MENU button.  
e The exposure setting numerical  
value is shown at the left end of the  
exposure bar. The exposure can  
be set to a value from 1.8EV to  
+1.8EV.  
0
HINT  
The exposure correction setting is canceled in the following  
cases:  
e When the pointer is set to the center position.  
e After the menu mode is changed.  
e When the main switch is set to [PLAY].  
e After the power is turned off.  
English 86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK  
ABOUT THE EXPERT MODE PLAYBACK  
SETTING SCREEN  
The EXPERT mode playback settings are performed on the EXPERT Mode  
Playback Setting Screen.  
Display the EXPERT Mode Playback Setting  
Screen  
Main switch  
1
2
3
Turn on the camera (page 37).  
Set the main switch to [PLAY].  
Press the MENU button.  
e The Menu Screen appears.  
MENU button  
4
Set the camera to the EXPERT  
mode (page 42)  
PLAYBACK METHOD  
e The EXPERT Mode Playback  
Set play all or 1  
clip  
Setting Screen appears.  
e To cancel the EXPERT Mode  
Playback Setting Screen, press the  
MENU button.  
87 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPERT MODE PLAYBACK SETTING SCREEN  
G
1
2
PLAYBACK METHOD  
3
4
5
6
Set play all or 1  
clip  
H
7
I
8
9
F
1 Playback method setting (page  
70)  
9 Print settings (page 98)  
e Set the DPOF settings.  
e Select continuous playback or  
F Option icon (page 105)  
e Display the Option Setting Screen.  
single-frame playback.  
2 Multi-playback (page 66)  
e Display images in the 9-frame  
multi-display format.  
G Menu mode display (page 42)  
H Help display (page 107)  
I Remaining battery power (page  
126)  
3 Volume control (page 71)  
e Adjust the video clip and audio  
data playback volume.  
4 Monitor brightness (page 72)  
e Adjust the brightness of the  
cameras LCD monitor display.  
5 Data protect setting (page 73)  
e Protect data from accidental  
erasure.  
6 Erase (page 75)  
e Delete images from the card  
memory.  
7 Rotate image (page 89)  
e Rotate still images.  
8 Video clip edit (page 90)  
e Edit video clips.  
English 88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ROTATE IMAGE  
Captured still images can be rotated to the correct orientation for viewing.  
1
Display the EXPERT Mode  
Playback Setting Screen (page 87).  
ROTATE  
2
Select the rotate icon L, and  
press the SET button.  
e The Rotate Image Screen appears.  
K : Rotates image clockwise 90  
degrees.  
! : Rotates image  
RIGHT  
LEFT  
EXIT  
counterclockwise 90 degrees.  
3
Select the rotate right icon K or  
rotate left icon !, and press the  
SET button.  
e Each time the SET button is  
pressed, the image is rotated  
another 90 degrees.  
89 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING VIDEO CLIPS  
You can delete (cut) the first part or the last part of a video clip. You can  
choose anywhere in the video clip as the cutting point.  
You can also join two video clips together and save them as one separate clip  
(joining).  
Note  
Warning concerning the battery pack remaining charge  
e During the editing of lengthy video clips, the time to process the large  
amount of data can become quite long. To avoid problems caused by the  
battery pack becoming depleted in the middle of video clip editing, before  
starting to edit be sure that a sufficiently charged battery pack is installed in  
the camera, or connect the AC adapter/charger.  
e It is recommended that a computer be used to edit long video clips.  
Procedure to save part of a video clip as a  
separate clip  
Play the video clip, and pause playback  
at the point you want to cut.  
J
Select whether to delete the portion before the cut point or after the  
cut point.  
J
Delete the specified portion.  
eThe specified portion is deleted.  
eThe original video clip is not affected. (You  
can also choose to erase the original video  
clip when the new clip is saved.)  
English 90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING VIDEO CLIPS  
Procedure to join two video clips  
Display the video clip that will come  
first.  
J
Select the video clip that you wish to  
append (join).  
J
Join the video clips. (Press the SET button.)  
eThe two video clips are saved together as  
a separate video clip.  
eThe original video clip is not affected. (You  
can also choose to erase the original video  
clip when the new clip is saved.)  
Note  
Caution when editing video clips  
e When editing video clips, do not move the main switch. If you move the main  
switch while editing video clips, not only will the editing not be properly  
completed, but the original video clip may also be erased.  
e By repeating the clipping and joining procedures, you can create exactly the  
video clip you like. Note, however, that as the number or size of the video  
clips increases, the card memory may become full, making it impossible to  
edit the video clips. (The CARD FULLmessage will appear.) In this case,  
you will need to free some of the memory on the card either by deleting data  
that are no longer necessary (page 75), or by performing the procedure to  
erase the original video clip(s) (page 94, 97).  
91 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting part of a video clip  
1
2
Display the video clip you wish to edit.  
Display the scene you wish to delete.  
e Specify whether you wish to delete the portion from the beginning of the  
video clip up to the selected scene, or the portion from the selected  
scene to the end of the video clip.  
First part  
Latter part  
Video clip start  
Selected scene  
Video clip end  
e To select the desired scene quickly, you can use a combination of the  
fast-forward (or reverse) playback, pause, and image-by-image  
playback functions (page 64).  
e The actual cut point may be slightly before or after the displayed scene.  
3
Display the EXPERT Mode  
Playback Setting Screen (page 87).  
Edit video clip  
EDIT VIDEO  
English 92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING VIDEO CLIPS  
EDIT VIDEO  
4
Select the edit video icon k, and  
press the SET button.  
e The Edit Video Screen appears.  
SAVE FRAME  
DELETE 1ST PART  
DELETE 2ND PART  
JOIN  
EXIT  
EDIT VIDEO  
5
Toggle the SET button up or down  
to select the portion you wish to  
delete.  
DELETE 1ST PART:  
Delete the first part of the video  
clip.  
DELETE 2ND PART:  
Delete the latter part of the video  
clip.  
SAVE FRAME  
DELETE 1ST PART  
DELETE 2ND PART  
JOIN  
EXIT  
DELETE 1ST PART  
6
Press the SET button.  
e A screen appears for you to  
confirm whether or not you want to  
save the original video clip.  
KEEP ORIGINAL IMAGE?  
YES  
NO  
EXIT  
93 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
8
Select whether you want the  
original video clip to be erased  
when clipping is executed.  
YES:  
The original video clip is saved.  
NO:  
The original video clip is not saved.  
Press the SET button.  
e If YESwas selected, the edited  
video clip is saved as a new video  
clip.  
e If NOwas selected, the edited  
video clip is saved as a new video  
clip, and the original video clip is  
erased.  
e To return to the Playback Setting  
Screen, press the MENU button, or  
select the d icon and press the  
SET button.  
Note  
e If the original video clip is protected, even if you select NOin step 7 and 8  
and press the SET button, the original video clip will not be erased. If you  
want it to be erased, you will need to first remove the protection.  
English 94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING VIDEO CLIPS  
Joining two video clips  
1
Display the first video clip.  
Currently showing video clip  
Video clip to be joined  
Video clip start  
Video clip end  
2
3
Display the EXPERT Mode  
Playback Setting Screen (page 87).  
Select the edit video icon k, and  
press the SET button.  
e The Edit Video Screen appears.  
EDIT VIDEO  
4
Select the join icon x.  
SAVE FRAME  
DELETE 1ST PART  
DELETE 2ND PART  
JOIN  
EXIT  
95 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Orange frame  
5
6
Press the SET button.  
100  
e The 9-image playback display for  
0001  
0003  
0004  
video clips appears.  
Toggle the SET button to move the  
orange frame to the video clip that  
you wish to join.  
7
8
Press the SET button.  
JOIN  
Select whether you want the  
original video clip to be erased  
when clipping is executed.  
KEEP ORIGINAL IMAGE?  
YES:  
The original video clips are saved.  
NO:  
The original video clips are not  
YES  
NO  
EXIT  
saved.  
Confirmation screen for  
saving the original video clip  
English 96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING VIDEO CLIPS  
9
Press the SET button.  
e The two video clips are saved together as a separate video clip.  
e If NOwas selected in step 8, the original video clips are erased when  
the joined video clip is saved.  
e Press the MENU button, or select the d icon and press the SET  
button, to return to the Playback Setting Screen.  
Extracting a still image from a video clip  
While video clip playback is paused, you save a still image of the paused  
scene.  
1
2
Display the frame (paused) you wish to save as a single still image.  
Select the edit video icon k from the EXPERT Mode Playback  
Setting Screen, and press the SET button.  
e The Edit Video Screen appears.  
3
Select the save frame icon 7, and press the SET button.  
e The frame that is currently displayed is saved as a still image.  
Note  
e If the original video clip is protected, even if you select YESin step 8 and  
press the SET button, the original video clip will not be erased. If you want it  
to be erased, you will need to first remove the protection.  
97 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRINT SETTINGS (STILL IMAGES ONLY)  
In addition to using your printer to print out still images captured with your  
camera, as with conventional film, you can have prints made at shops offering  
digital print services. Moreover, this camera is DPOF-compatible, so you can  
use the camera to specify the number of prints, whether or not the date is  
displayed on the print, and also to specify an index print.  
Display the Print Settings Screen  
PRINT SETTING  
1
2
Display the EXPERT Mode  
Playback Setting Screen (page 87).  
ALL IMAGES  
EACH IMAGE  
INDEX  
ALL CLEAR  
Select the print settings icon b,  
EXIT  
and press the SET button.  
e The Print Settings Screen appears.  
ALL IMAGES:  
The specified print settings apply to  
all the still images on the card.  
EACH IMAGE:  
The print settings are specified for  
each individual image.  
INDEX:  
All the still images are printed as  
miniature images (thumbnail  
images), several images on one  
print.  
ALL CLEAR:  
Clear all the print settings. This  
cannot be selected if no print  
settings have been made for the  
image.  
EXIT:  
Return to the Still Image Playback  
Setting Screen.  
English 98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRINT SETTINGS (STILL IMAGES ONLY)  
HINT  
e To print with a printer or have the digital print service shop print out a still  
image from a video clip, you must first save it (save frame) as a still image.  
HINT  
About the DPOF format  
e DPOF (Digital Print Order Format) is a print order format. You can connect  
your camera to a DPOF-compatible printer to produce your prints. You can  
also set the print settings for the desired images, and then have the reserved  
images printed automatically.  
About the finished prints  
e Images that have been rotated will be printed in their original orientation.  
e The quality of the print output will differ depending on the print service and  
printer used.  
99 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifying date imprinting and print quantities  
You can specify print settings for each individual image (EACH IMAGE), or  
apply the print settings to all the images on the card (ALL IMAGES).  
1
2
Display the Print Settings Screen  
(page 98).  
PRINT SETTING  
Select EACH IMAGE or ALL  
IMAGES.  
ALL IMAGES:  
The set print settings are applied  
only to the image currently  
displayed.  
ALL IMAGES  
EACH IMAGE  
INDEX  
ALL CLEAR  
EXIT  
EACH IMAGE:  
The set print settings are applied to  
all the still images on the card.  
ALL IMAGES  
SETTINGS  
DATE:  
3
Press the SET button.  
DATE  
NO  
1
e The Date/Number Print Screen  
appears.  
COPIES  
COPIES:  
e If EACH IMAGE was selected,  
toggle the SET button to the left or  
right to display the desired image  
to print.  
ADD TO PRINT SETTING  
EXIT  
e Under SETTINGSthe settings  
that are currently active for the  
displayed image are shown. You  
can toggle the SET button to the  
left or right to confirm the print  
settings for each image.  
English 100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRINT SETTINGS (STILL IMAGES ONLY)  
4
Specify whether the date is  
displayed on the print, and the  
number of prints.  
ALL IMAGES  
DATE  
SETTINGS  
DATE:  
<Specifying dated prints>  
1 Toggle the SET button up or down  
to select DATE.  
NO  
2 Press the SET button.  
d The Print Date Screen appears.  
3 Toggle the SET button up or down  
to select the desired option.  
YES:(2)  
COPIES:  
Print the date.  
NO:(2)  
Do not print the date.  
4 Press the SET button.  
d You are returned to the Date/  
Number Print Screen.  
<Specifying the number of prints>  
1 Toggle the SET button up or down  
to select COPIES.  
ALL IMAGES  
COPIES  
SETTINGS  
DATE:  
2 Press the SET button.  
1
COPIES:  
d The Print Number Screen  
appears.  
3 Toggle the SET button up or down  
to specify the number of prints.  
d Toggle the SET button up or  
down until the desired number of  
prints is displayed.  
4 Press the SET button.  
d You are returned to the Date/  
Number Print Screen.  
101 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALL IMAGES  
DATE  
SETTINGS  
DATE:YES  
COPIES:1  
5
Select ADD TO PRINT SETTINGS”  
and press the SET button.  
NO  
1
e The Confirm Print Settings Screen  
COPIES  
appears.  
If the print settings are correct:  
Select EXIT, and press the SET  
button.  
MODIFY PRINT SETTING  
EXIT  
If the print settings were changed:  
Select MODIFY PRINT  
SETTING, and press the SET  
button.  
Index print  
Printing out many small images on one sheet is called an index print.This  
is convenient for use as a list of the images you have captured.  
PRINT SETTING  
1
2
Display the Print Settings Screen  
(page 98).  
ALL IMAGES  
EACH IMAGE  
INDEX  
ALL CLEAR  
Select INDEX.  
EXIT  
English 102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRINT SETTINGS (STILL IMAGES ONLY)  
INDEX  
3
Press the SET button.  
e The Index Print Screen appears.  
YES:  
SET INDEX PRINT  
Specify an index print copy.  
EXIT:  
Discontinue the setting procedure,  
and return to the Print Setting  
Screen.  
YES  
EXIT  
4
Select YES, and press the SET  
button.  
e This completes the setting for the  
index print. You are returned to the  
Print Settings Screen.  
Changing the print settings  
ALL IMAGES  
SETTINGS  
DATE:YES  
COPIES:1  
1
Follow steps 1 to 4 on page 100  
and 101.  
DATE  
NO  
1
COPIES  
MODIFY PRINT SETTING  
EXIT  
2
Select MODIFY PRINT SETTING,  
and press the SET button.  
103 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clearing all the print settings  
Delete the print settings for all images.  
PRINT SETTING  
1
Display the Print Settings Screen  
(page 98).  
ALL IMAGES  
EACH IMAGE  
INDEX  
ALL CLEAR  
EXIT  
2
3
Select ALL CLEAR.  
ALL CLEAR  
Press the SET button.  
DPOF  
9
e The Confirm All Clear Screen  
appears.  
CLEAR ALL SETTINGS?  
YES:  
Clear the print settings for all  
images.  
EXIT:  
YES  
EXIT  
Cancel the clear procedure and  
return to the Print Settings Screen.  
4
Select YES, and press the SET  
button.  
e All the print settings are cleared  
and you are returned to the Print  
Settings Screen.  
English 104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPTION SETTINGS  
CAMERA SETTINGS  
ABOUT THE OPTION SETTING SCREEN  
The Option Setting Screen is used to adjust various camera settings and is  
common to both the BASIC and EXPERT modes.  
To display the Option Setting Screen  
1
Turn on the camera (page 37).  
2
Press the MENU button.  
e The Menu Screen appears.  
OPTION MENU  
3
Select the option icon 3, and  
press the SET button.  
GUIDANCE  
OPERATION BEEP  
USB SETTING  
FILE No. RESET  
CLOCK SET  
e The Option Setting Screen  
appears.  
e To cancel the Option Setting  
Screen and return to the Menu  
Screen, press the MENU button.  
LANGUAGE  
TV SYSTEM  
105 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Option Setting Screen  
1
GUIDANCE  
2
3
4
5
6
7
OPERATION BEEP  
USB SETTING  
FILE No. RESET  
CLOCK SET  
LANGUAGE  
TV SYSTEM  
G
8
9
F
POWER SAVE  
RESET SETTINGS  
REFORMAT  
1 Guidance setting (page 107)  
e Set the help display and audio  
guide on or off.  
8 Power save function (page 119)  
9 Reset camera settings (page  
121)  
2 Operation sounds setting (page  
108)  
e Reset the camera to the factory-  
preset settings.  
e Adjust the operation sounds  
produced when the cameras  
buttons are pressed.  
F Card reformat (page 122)  
e Use the camera to reformat the  
memory card.  
3 USB setting (page 110)  
G Remaining battery power (page  
126)  
e Specify whether a printer or a  
computer is connected.  
4 File number reset (page 111)  
e Select the file number reset  
function.  
5 Date and time setting (page 114)  
e Set the cameras internal clock.  
6 Screen language (page 117)  
e Select the language in which the  
LCD monitor messages are  
displayed.  
7 TV system setting (page 118)  
e Select the type of video signal that  
is output from the cameras  
DIGITAL/AV terminal.  
English 106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GUIDANCE FUNCTIONS  
You can set whether or not the help display is shown on the LCD monitor, and  
whether the audio guide giving verbal operation instructions is enabled.  
1
2
Display the Option Setting Screen  
(page 105).  
GUIDANCE  
Select the guidance icon r, and  
press the SET button.  
HELP DISP  
AUDIO GUIDE  
EXIT  
ON  
ON  
e The Guidance Setting Screen  
appears.  
HELP DISP:  
Enable or disable the HELP  
messages display.  
AUDIO GUIDE:  
Adjust the volume of the audio  
guide. When set to OFF, the  
audio guide is muted.  
EXIT:  
Cancel the setting mode, and  
return to the Option Setting Screen.  
3
Toggle the SET button up or down to select the desired setting, and  
press the SET button.  
e The setting screen for the selected parameter appears.  
e Toggle the SET button up or down to change the setting for the  
parameter, and press the SET button.  
107 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIONAL SOUNDS SETTING  
This setting allows you to set whether or not a confirming audio signal sounds  
when the operation buttons (still image shooting button, SET button, MENU  
button, etc.) are pressed.  
OPERATION BEEP  
1
2
Display the Option Setting Screen  
(page 105).  
TURN ON/OFF  
SHUTTER  
KEY SW  
ON  
B
A
Select the BEEP icon ?, and  
press the SET button.  
EXIT  
e The Operation Sounds Setting  
Screen appears.  
TURN ON/OFF:  
Mute or enable the sound that is  
produced when the power is turned  
on or off.  
SHUTTER:  
Select the sound that is produced  
when the still image shooting  
button is pressed, or when a photo  
is taken using the self-timer.  
KEY SW:  
Select the sound that is produced  
when the SET button, MENU  
button, etc. are pressed.  
EXIT:  
Return to the Option Setting  
Screen.  
English 108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIONAL SOUNDS SETTING  
3
Toggle the SET button up or down to select the desired setting, and  
press the SET button.  
<If TURN ON/OFF is selected>  
e The screen to turn the operation sounds on or off appears.  
e Toggle the SET button up or down to select the desired setting, and  
press the SET button.  
ON:  
Activates the operational sounds when the camera is turned on or off.  
OFF:  
Deactivates the operational sounds when the camera is turned on or  
off.  
<If SHUTTER or KEY SW is selected>  
d
d
d
The screen to select the operation sounds appears.  
Select from 8 different sounds (A to H).  
You can press the still image shooting button to preview the selected  
operation sound.  
If OFFis selected, no sound is produced.  
Toggle the SET button up or down to select the desired setting, and  
press the SET button.  
d
d
HINT  
e If you keep the MENU button pressed and turn on the power, the screen to  
set whether the operation sounds are enabled or disabled appears at once.  
You may find this a convenient procedure to switch the setting in places you  
do not want the operation sounds to be audible. If the operational sound is  
set to OFF, the audio guide is also muted.  
109 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB FUNCTION SETTING  
Perform the USB setting when the dedicated USB interface cable is used to  
connect your camera to another device. Two modes are available for the USB  
connection function. The PC connection mode is selected when the camera is  
connected to a computer and used as a card reader. Select the PictBridge  
mode when the camera is connected to a printer.  
USB SETTING  
1
2
Display the Option Setting Screen  
(page 105).  
CARD READER  
PICTBRIDGE  
Select the USB setting icon ;,  
and press the SET button.  
e The USB Setting Screen appears.  
CARD READER:  
PC connection mode setting (page  
129)  
PICTBRIDGE:  
PictBridge mode setting (page 139)  
3
Select the correct mode for your  
purpose, and press the SET button.  
Note  
e When the CARD READER mode is set and the camera is connected to a  
computer, the multi-indicator lights green.  
e When the PICTBRIDGE mode is set and the camera is connected to a  
printer, the multi-indicator lights red.  
English 110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FILE NO. RESET FUNCTION  
If a reformatted card is used, the file name (image number) of the captured  
image automatically begins from 0001. If the card is subsequently reformatted,  
or if a different reformatted card is used, the file names again begin from 0001.  
This is because the file number reset function is set to ON, and consequently it  
results in more than one card containing images with the same numbers. By  
setting the file number reset function to OFF, even if the card is reformatted or  
the card is replaced with another card, the consecutive numbering of file names  
continues from the last number recorded by the camera.  
<File number reset function ON>  
File name (image number)  
Card A 0001, 0002 ...... 0012, 0013  
Replace card  
Card B 0001, 0002 ...... 0012, 0013  
<File number reset function OFF>  
File name (image number)  
Card A 0001, 0002 ...... 0012, 0013  
Replace card  
Card B 00014, 00015 ..... 0025, 0026  
111 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
e If Card B already has image data in it when it replaces Card A, file  
names are assigned as follows.  
d
When the highest image number on Card B (before replacing) is  
lower than the highest image number on Card A: the file name of the  
next recorded image continues from last file name recorded on Card  
A.  
Card A 0001, 0002 ...... 0012, 0013  
Replace card  
Card B 0001, 0002, 0014, 0015 ..... 0025, 0026  
Previously recorded images  
d
When the highest image number on Card B (before replacing) is  
higher than the highest image number on Card A: the file name of the  
next recorded image continues from last file name recorded on Card  
B.  
Card A 0001, 0002 ...... 0012, 0013  
Replace card  
Card B 0020, 0021, 0022, 0023 ..... 0025, 0026  
Previously recorded images  
English 112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FILE NO. RESET FUNCTION  
1
2
3
Display the Option Setting Screen  
(page 105).  
FILE No. RESET  
Select the file number reset icon  
i.  
ON  
OFF  
Press the SET button.  
e The File Number Reset Screen  
appears.  
ON:  
The file number reset function is  
on.  
OFF:  
The file number reset function is  
off.  
4
Select OFF, and press the SET button.  
e The file number reset function is deactivated.  
Note  
e Until the file number reset function is turned ON, consecutive file names are  
assigned. It is recommended that the file number reset function be returned  
to ON at the end of each photography session.  
113 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DATE AND TIME SETTING  
The camera will record the date and time an image or audio recording is taken  
so that you can display them during playback. Therefore, before capturing  
images, make sure the correct date and time are set.  
Example: To set the clock to 7:30 p.m. on December 23, 2003  
1
2
Display the Option Setting Screen  
(page 105).  
CLOCK SET  
DATE  
Select the clock set icon C, and  
press the SET button.  
e The Clock Set Screen appears.  
e The current date and time settings  
are shown.  
2003/10/01  
00:00  
TIME  
DISP  
Y/M/D  
e Follow the procedures below to  
enable or disable the date display  
during playback, to set the display  
format for the date, and to set the  
date and time.  
EXIT  
e To return to the Option Setting  
Screen, press the MENU button, or  
select EXITand press the SET  
button.  
English 114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DATE AND TIME SETTING  
CLOCK SET  
DATE  
3
Set the date.  
2003/12/23  
1 Select DATE.  
2 Press the SET button.  
d The Set Date Screen appears.  
3 Set the date to 2003/12/23.  
d The date is set in the following  
order: Set the year _ Set the  
month _ Set the day.  
d Toggle the SET button left or  
right to select year, month or  
day. Toggle the SET button up or  
down to increase or decrease  
the number.  
4 Press the SET button.  
CLOCK SET  
TIME  
4
5
Set the clock.  
1 Select TIME.  
2 Press the SET button.  
d The Set Time Screen appears.  
3 Set the time to 19:30.  
d The time is set in the following  
order: Set the hour _ Set the  
minute.  
19:30  
d A 24-hour clock is used for the  
time display.  
4 Press the SET button.  
CLOCK SET  
DISP  
Set the order in which the date is  
displayed during playback.  
1 Select DISP.  
2 Press the SET button.  
d The Set Date Format Screen  
appears.  
Y/M/D  
3 Toggle the SET button up or down.  
115 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
e Toggle the SET button up to change the displayed date order as  
follows:  
year/month/day  
month/day/year  
day/month/year  
DISP OFF (no display)  
Toggle the SET button down to change it in the reverse order.  
e If DISP OFFis selected, the date the image was captured is not  
shown during playback.  
4 Press the SET button.  
6
Select EXIT, and press the SET  
button.  
e The date and time setting is  
completed, and you are returned to  
the Option Setting screen.  
Note  
e Under normal conditions, while the battery pack is being replaced, an  
internal battery will maintain the date and time settings. However, there is a  
small chance the settings may be lost. (The backup will last for about 7  
days.) It is recommended to check that the date and time settings are still  
correct after replacing the battery pack and before shooting or recording of  
any type (follow steps 1 and 2).  
To correct the date and time settings  
e After steps 1 and 2, select the line of the setting that you want to change,  
press the SET button, and follow the steps in the respective paragraphs  
above to change the setting.  
English 116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCREEN LANGUAGE  
You can set the LCD monitor of your camera to display the messages in any  
one of nine languages.  
1
2
Display the Option Setting Screen  
(page 105).  
LANGUAGE  
Select the language icon z, and  
press the SET button.  
ITALIANO  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPAÑOL  
e The Language Screen appears.  
: Select for Japanese.  
ENGLISH: Select for English.  
FRANCAIS: Select for French.  
DEUTSCH: Select for German.  
ESPAÑOL: Select for Spanish.  
ITALIANO: Select for Italian.  
: Select for Korean.  
: Select for Chinese (traditional).  
: Select for Chinese (simplified).  
3
Select the desired language, and  
press the SET button.  
e You are returned to the Option Setting Screen.  
HINT  
e In the shooting mode, if you press and hold the MENU button, the screen in  
step 2 appears, allowing you to set the screen language.  
117 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV SYSTEM SETTING  
This setting is to specify the type of image signal that is output from the  
cameras DIGITAL/AV terminal.  
1
2
Display the Option Setting Screen  
(page 105).  
TV SYSTEM  
Select the TV system icon j, and  
press the SET button.  
e The TV System Setting Screen  
NTSC  
PAL  
appears.  
NTSC:  
Output NTSC video signals  
PAL:  
Output PAL video signals  
3
Select the appropriate TV system,  
and press the SET button.  
Note  
e If the TV system setting is not correct for the connected TV, you will not be  
able to view the images on the TV.  
When set to PALand connected to a TV  
Shooting: Images are displayed on the LCD monitor only and do not appear on  
the TV.  
Playback: Images are displayed on the TV only and do not appear on the LCD  
monitor.  
English 118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER SAVE SETTING  
Your camera has a power savefunction whereby the power automatically  
turns off after a specified period of inactivity. The power save function works to  
conserve the battery pack power when the camera is not being used, or to  
prevent the battery pack from dying if the camera has accidentally been left on.  
You can specify the elapsed time (standby time) before the power save  
function is activated.  
1
2
Display the Option Setting Screen  
(page 105).  
POWER SAVE  
BATT/CAM  
Select the power save icon ?,  
and press the SET button.  
1 min  
5 min  
e The Power Save Setting Screen  
BATT/PB  
appears.  
BATT/CAM:  
EXT.PWR/CAM.PB  
EXIT  
10 min  
Set the standby time for the  
shooting modes when the battery  
pack is used.  
BATT/PB:  
Set the standby time for the  
playback modes when the battery  
pack is used.  
EXT.PWR/CAM.PB:  
Set the standby time for the  
shooting and playback modes  
when using an AC power source.  
EXIT:  
Return to the Option Setting  
Screen.  
119 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
4
Select the desired option.  
Press the SET button.  
POWER SAVE  
BATT/CAM  
1 min  
e The Set Standby Time Screen  
appears.  
5
6
Toggle the SET button up or down  
to set the standby time.  
<Example: When BATT/  
Up:  
CAMis selected>  
Increases the standby time.  
Down:  
Decreases the standby time.  
Press the SET button.  
e The standby time is set, and you  
are returned to the Power Save  
Setting Screen.  
English 120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RESETTING THE CAMERA SETTINGS  
Reset the camera to the factory-preset settings.  
1
2
Display the Option Setting Screen  
(page 105).  
RESET SETTINGS  
Reset?  
Select the reset settings icon 2,  
and press the SET button.  
e The Reset Settings Screen  
appears.  
YES:  
YES  
NO  
Reset to the factory-preset  
settings.  
NO:  
Do not change the settings, and  
return to the Option Setting Mode  
Screen.  
3
Select YES, and press the SET  
button.  
e The camera settings are reset to  
the factory-preset settings.  
HINT  
e Note that the following settings do not change with this procedure:  
Date and time setting  
Language setting  
TV system setting  
121 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FORMATTING A CARD  
The supplied card must be formatted with this camera. In addition, a card must  
be formatted with this camera:  
After purchasing, when used for the first time, or  
If it was formatted using a personal computer or another digital camera.  
The card cannot be reformatted if the lock switch is set to the LOCKposition.  
Proceed with the reformat procedure after setting the lock switch to the  
unlocked position (page 26).  
1
2
Display the Option Setting Screen  
(page 105).  
FORMAT  
Select the reformat icon 1, and  
press the SET button.  
FORMAT  
e The Reformat Screen appears.  
e In normal use, a total format is not  
necessary. However, in case a  
card error occurs even after normal  
formatting, executing a total  
reformat may resolve the problem.  
FORMAT:  
FULL FORMAT  
EXIT  
A normal reformatting is executed.  
FULL FORMAT:  
The entire card is scanned and  
reformatted. (When there is little  
battery power remaining, this  
setting cannot be selected.)  
English 122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FORMATTING A CARD  
3
Select the desired format option,  
and press the SET button.  
4
5
Select YES.  
Press the SET button.  
e Reformatting begins.  
e During reformatting, REFORMAT”  
and DO NOT POWER OFFare  
shown on the LCD monitor.  
CAUTION  
Caution during reformatting  
e Do not turn off the power to the camera or eject the card during reformatting.  
Reformatting erases the data  
e When a card is reformatted, all data recorded on the card is erased.  
Protected data (page 73) is also erased, so before reformatting a card, any  
data you want to keep should be copied to your personal computers hard  
disk or other storage medium.  
HINT  
To cancel reformatting  
e In step 4, select EXIT, and press the SET button.  
123 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHECKING THE REMAINING CARD MEMORY  
You can check how many images can be captured and how much recording  
time is available on the card. For a table showing the maximum number of  
images and recording time for specific cards, please see Possible No. of  
Images/Possible Shooting Time/Possible Recording Timeon page 167.  
Checking the remaining number of images and  
video recording time  
Remaining number of images  
1
Set the main switch to REC, and  
turn on the power (page 37).  
Remaining video  
recording time  
e The remaining number of images  
appears in the upper left of the  
LCD monitor.  
6
00:09  
e The remaining video recording time  
appears in the upper right of the  
LCD monitor.  
e The remaining number of images  
and video recording time will differ  
depending on the resolution and  
compression settings.  
e When the remaining number of  
images or the remaining video  
recording time is 0, you cannot  
capture any more images. To  
capture more images, either install  
a new card, or save the images to  
a computer (page 129) and then  
erase them (page 75) from the  
card.  
<Still image shooting mode>  
e When the remaining number of images or the remaining video  
recording time is 0, it may be possible to capture a few more images  
by setting a lower resolution setting (pages 55, 56), or selecting a  
different compression setting.  
English 124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHECKING THE REMAINING CARD MEMORY  
For audio data  
100-0004  
96KB  
INFO  
1
Display the Audio Data Information  
Screen (page 77).  
e The remaining card memory is  
shown.  
AAC  
00:00:03  
UNUSED MEMORY 21%  
2003.12.25 19:30  
125 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHECKING THE REMAINING BATTERY PACK  
CHARGE  
When using the battery pack, the remaining battery pack charge can be  
checked on the LCD monitor. Make sure to check this indicator before  
capturing an image. For an indication of the possible length of time for battery  
pack operation, see page 166.  
1
Display a Shooting or Playback  
Setting Screen (pages 52, 68, 78,  
87).  
VIDEO CLIP MPEG4  
640¶480 30fps HQ  
e The battery pack remaining charge  
indicator appears in the lower right  
corner of the LCD monitor.  
e Due to the battery pack  
characteristics, when the ambient  
temperature is low, r may  
appear early for an incorrect  
indication of the remaining charge.  
Also, depending on the conditions  
of use of the camera or the ambient  
conditions (temperature, etc.), the  
indicated remaining charge may  
change. Therefore, this indication  
can only be used as a general  
approximation of the remaining  
charge.  
Battery pack remaining  
charge indicator  
Battery pack remaining charge indicator  
r
Approx. full.  
r
Power is low.  
It will soon be impossible to capture or play back  
images.  
r
r
If this icon flashes when the still image shooting  
button or video clip recording button is pressed,  
images cannot be captured. Recharge the battery  
pack.  
English 126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHECKING THE REMAINING BATTERY PACK CHARGE  
HINT  
e If any data is present, you can also check the remaining battery pack charge  
on the Playback Screen.  
e Use only the supplied or separately sold battery pack in this camera.  
e Battery life may differ even among battery packs of the same type.  
e Depending on the usage of the camera (such as the number of times the  
flash is used, the use of the LCD monitor, etc.) or the ambient temperature  
(temperatures below 10°C) the number of images that can be saved on a  
fully charged battery pack will vary greatly.  
Note  
e It is recommended that you prepare an extra battery pack(s) when taking  
pictures at a wedding or while traveling, for example, so you dont miss  
capturing images of important moments due to the battery pack power  
running out. The same is recommended for taking photos in cold  
environments. (In a ski area, for example, the battery pack can be kept warm  
in your pocket until ready to use.)  
127 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER DEVICES AND CONNECTIONS  
DOCKING STATION  
Set your camera in the supplied docking station to recharge the battery pack as  
well as for easy connection to a computer, printer or TV. A remote control unit is  
provided for even easier operation of your docked camera (playback only).  
CAUTION  
Gently connect and disconnect the cable  
e When connecting and disconnecting the cable, please do so with a gentle  
touch. Exerting a strong pull on the cable or connector may damage them.  
Connecting the docking station  
Connect the AC adapter/charger  
Use the supplied AC adapter/charger to connect the DC IN terminal on the  
docking station to a power outlet.  
To AC  
English 128  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOCKING STATION  
Connect to another device  
<To connect to a computer or printer>  
Use the supplied USB interface cable to connect the DIGITAL/AV terminal of  
the docking station to the USB terminal of a computer or printer.  
e Connect the dedicated USB interface cable to your computers USB  
connector. Do not connect it to the USB port on your monitor or  
keyboard, or to the USB hub. Be especially careful when installing the  
driver software. In some instances, it may not be possible to correctly  
install the driver software.  
e Please refer to the included Sanyo Software Pack instruction manual  
for information regarding operating your camera from a computer.  
Supplied USB interface cable  
To USB connector on the computer or printer  
DIGITAL/AV terminal  
<To connect to a TV>  
Use the supplied AV cable to connect the DIGITAL/AV terminal of the  
docking station to the audio and video terminals of a TV.  
e After connecting the camera to the television, set the TV input switch to  
VIDEO input.  
e The remote control unit can be used for playback.  
e The playback method is the same as when viewing images on the LCD  
monitor.  
e The same playback procedure as when playing back with the camera is  
used to play back audio recordings as well.  
129 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Yellow plug:  
To Video Input terminal  
Supplied AV cable  
DIGITAL/AV terminal  
White plug: To Audio Input (LEFT) terminal  
Red plug: To Audio Input (RIGHT) terminal  
Data file formats  
The format of the files saved on the card and the method in which the file  
names are determined are explained below.  
Type of data  
Data format  
File name structure  
File name begins with SANY.  
Extension is .jpg.  
SANY****.jpg  
Still image data JPEG  
File name begins with VCLP.  
Extension is .mp4.  
VCLP****.mp4*  
Video clip data  
MPEG-4  
MPEG-4 Audio File name begins with SUND.  
Audio recording  
data  
(AAC  
Extension is .m4a.  
compression)  
SUND****.m4a*  
*Consecutive numbers assigned in the order the data was saved.  
English 130  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOCKING STATION  
Configuration of directories for the stored data  
ROOT  
DCIM  
100SANYO  
SANY0001.jpg  
SANY0002.jpg  
VCLP0003.mp4  
SANY0004.wav  
SANY0005.jpg  
Image number  
Folder number  
MISC  
(Location of  
DPOF files)  
Video clip or  
audio  
recording  
number  
101SANYO  
102SANYO  
SANY0001.jpg  
SANY0002.jpg  
SANY9999.jpg  
SANY0001.jpg  
SANY0002.jpg  
* Up to 9999 files can be stored in folder 100SANYO. If more files are made, a folder  
named 101SANYO is created, and they will be stored in there. New folders will then be  
named in sequence, i.e., 102SANYO, 103SANYO, etc.  
Note  
About video clip data recorded with this camera  
e You can use Apples QuickTime 6.1 or later version to play back video clips on a  
computer. Playback may also be possible using other software that supports the  
ISO standard MPEG-4 (AAC audio). QuickTime6.3 for Windows and Macintosh  
is supplied with the included CD-ROM (Sanyo Software Pack).  
About audio data recorded with this camera  
e If you change the extension (.m4a) of audio data files to .mp4, playback  
may be possible using software that supports the ISO standard MPEG-4  
(AAC audio).  
About file names when the card is replaced...  
e If the file number reset function is set to off, even when the card is replaced,  
consecutive numbering of folder numbers and file names continues from the  
previously installed card (page 111).  
CAUTION  
If you intend to view the images on the camera, do not use a  
computer to rewrite the card data.  
e If the folders, file names, or their configuration is modified using a personal  
computer, it will be impossible to play back the data using the camera, and  
the camera may not operate properly.  
131 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set the camera in the docking station  
1
Close the cameras monitor unit,  
and set it in the docking station.  
e Note the cameras orientation and  
the position of the docking station  
terminals, and insert the camera  
firmly.  
e Recharging begins as soon as the  
camera is set in the docking  
station.  
e During charging, the charging  
indicator lights red. When charging  
is complete, the charging indicator  
lights green.  
e If there is a battery malfunction or if the camera is incorrectly set in the  
docking station, the charging indicator flashes red, and the docked  
cameras multi-indicator flashes red. Set the camera in the docking  
station correctly.  
Preparing and using the remote control unit  
Use the supplied remote control unit to play back data from the docked  
camera.  
Prepare the remote control unit  
The remote control unit comes with the battery already installed at the time  
of purchase.  
1
Pull out and remove the protective  
battery insulating sheet.  
e The remote control unit becomes  
operative when the insulating sheet  
is removed.  
English 132  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOCKING STATION  
How to use the remote control unit  
The remote control unit can be used at an angle that is displaced 15 degrees  
horizontally from the remote control sensor on the front of the docking  
station, at a distance of up to 7 meters.  
At a distance of up to 7 meters  
Infrared emitter  
15˚  
Remote control  
15˚  
sensor  
15˚ horizontally  
CAUTION  
e If the remote control unit is operated in sunlight or under inverter lighting, the  
remote control receiving range may become shorter. This is a characteristic  
of the infrared remote control unit and is not a defect. To avoid this  
malfunction when operating the remote control unit, take care to shield the  
remote control sensor from strong light.  
133 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
<Remote control unit button operation>  
1
CH.  
MENU  
2
3
5
6
SET  
4
7
1 CH (channel)  
e Switch the remote control code (page 136).  
2 SET  
e Same operation as the cameras SET button.  
3 MENU  
e Same operation as the cameras MENU button.  
4 [G]  
e Works the same as toggling the cameras SET button to the left.  
5 [I]  
e Works the same as toggling the cameras SET button up.  
6 [H]  
e Works the same as toggling the cameras SET button to the right.  
7 [J]  
e Works the same as toggling the cameras SET button down.  
English 134  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOCKING STATION  
Replacing the remote control unit battery  
The life of the lithium battery will depend on your use of the remote  
control unit, but as a general guideline, it will require replacement about  
once a year. Follow the steps below to replace the CR2025 Lithium  
battery (sold commercially).  
1
Pull out the battery holder from the  
remote control unit.  
e Push in the tab to release the  
battery holder, and then pull it out.  
2
3
Remove the battery.  
Insert a new battery (CR2025) in the  
holder.  
e Wipe the new battery with a soft,  
dry cloth, and then insert it with the  
(+) mark facing upward.  
4
Reinsert the battery holder in the  
remote control unit.  
135 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the remote control code  
The remote control unit will also work with other Sanyo cameras that can be  
operated by infrared remote control. When more than one camera is  
present, it is recommended to change the remote control code to ensure that  
only the intended camera operates when the remote control unit is used.  
The remote control code is set to RC CODE 1at the time of purchase.  
<Changing the remote control code from RC CODE 1to RC  
CODE 2>  
1
2
3
Aim the infrared emitter at the remote control sensor on the docking  
station.  
Hold down the CH button and press the [I] button for about 3  
seconds.  
Press a button on the remote control unit and check that the camera  
is receiving correctly.  
e The remote control codes are retained even if the batteries in the  
remote control unit and camera are replaced.  
e If the remote control codes for the remote control unit and the camera  
and do not match, the remote control unit cannot be used to operate  
the camera.  
English 136  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOCKING STATION  
<Resetting the remote control code to RC CODE 1>  
1
2
Aim the infrared emitter at the remote control sensor on the docking  
station.  
Hold down the CH button and press the [J] button for about 3  
seconds.  
Select the image to play back.  
1
2
Connect the docking station to a TV, and set the camera in the  
docking station.  
Press the CAMERA/CHARGE button to turn on the camera lamp.  
CAMERA/CHARGE button  
Camera indicator  
3
Set the TV input switch to VIDEO input.  
e If the camera is set to the playback mode, the Playback Screen  
appears on the TV monitor. The playback method is the same as when  
viewing images on the LCD monitor.  
137 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CABLE ADAPTER  
When not using the docking station, you can connect the camera to a  
computer, printer, TV or AC adapter/charger, etc, using the supplied adapter.  
1
2
Attach the adapter to the docking station terminals on the bottom of  
the camera.  
Various devices can be connected to the adapter terminals  
DC IN terminal:  
Connect the supplied AC adapter/charger.  
DIGITAL/AV terminal:  
Connect to a computer, printer or TV.  
To docking station terminal on the camera  
Supplied USB interface cable  
or AV cable  
Supplied AC adapter/charger  
Note  
The remote control unit cannot be used.  
e Unlike when using the camera in the docking station, when the adapter is  
connected, the remote control unit cannot be used to operate the camera. To  
play back data from the camera, use the operation buttons on the camera.  
The battery cannot be recharged.  
e When recharging the battery pack that is installed in the camera, set the  
camera in the docking station. To recharge the battery pack without using  
the docking station, remove the battery pack from the camera and set it in  
the AC adapter/charger to recharge it.  
English 138  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO A PRINTER  
Your camera supports the PictBridge function. By connecting the camera  
directly to a PictBridge-enabled printer, the cameras LCD monitor can be used  
to select images and initiate printing.  
Print preparations  
1
Install the card containing the images you want to print in the  
camera.  
2
Use the supplied docking station or adapter to connect the camera to  
the printer (pages 132 and 138).  
Supplied USB interface cable  
To USB connector on the printer  
DIGITAL/AV terminal  
139 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
<Using the docking station>  
e Set the camera in the docking station, and press the CAMERA/CHARGE  
button to turn on the camera indicator.  
e When the connections are complete, turn on the printer, and confirm that the  
cameras multi-indicator is lit red. When the multi-indicator is lit green, it is  
not possible to print.  
Multi-indicator  
CAMERA/CHARGE button  
Camera indicator  
<Using the cable adapter>  
e After attaching the cable adapter, set the cameras main switch to PLAY.  
WARNING  
Do not turn off the power to the printer while it is connected.  
e If the power to the printer is turned off while it is connected, the camera may  
not operate correctly. If the camera does not operate correctly, disconnect  
the USB interface cable, turn off the camera, and then reconnect the cable.  
English 140  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO A PRINTER  
PRINTING MODE  
ONE IMAGE  
3
The PictBridge printing mode is  
activated.  
e The camera switches to the  
PictBridge printing mode, and the  
PictBridge Screen appears.  
Print this image  
CAUTION  
e During PictBridge printing, the cameras button operation response is slower.  
e If the camera is powered by batteries for printing, make sure that the  
remaining battery charge is sufficient.  
141 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select one image and print it (one image)  
Procedure to select one still image and print it.  
1
2
Complete the printing setup (page  
139).  
ONE IMAGE  
COPIES  
100-0002  
Select the choose one image icon  
Y, and press the SET button.  
1
e The screen to select images for  
printing appears.  
PRINT  
EXIT  
3
Toggle the SET button to the left or  
right to display the image you with  
to print.  
e Specify the image to print.  
English 142  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO A PRINTER  
ONE IMAGE  
COPIES  
100-0002  
4
Specify the number of prints.  
1 Select COPIES, and press the  
SET button.  
1
2 Toggle the SET button up or down  
to specify the number of prints.  
3 Press the SET button.  
e PRINTis selected.  
5
Press the SET button.  
e Printing begins.  
Note  
To cancel printing  
e During printing, toggle the SET button down.  
d
d
The Confirm Cancel Printing Screen appears.  
e Select YES, and press the SET button.  
If NOis selected and the SET button is pressed, printing resumes.  
143 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To print all the images (all images)  
Print all of the images on the card.  
1
2
Complete the printing setup (page  
139).  
ALL IMAGES  
100-0002  
Select the print all images icon  
u, and press the SET button.  
e The Print All Images Screen  
appears.  
PRINT  
EXIT  
3
Select PRINT, and press the SET  
button.  
e Printing begins.  
Note  
Printing is not possible if there are more than 999 still images in  
the card.  
e Delete unwanted images before printing.  
English 144  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO A PRINTER  
Thumbnail prints (index)  
Make an index print of all the images on the card.  
1
2
Complete the printing setup (page  
139).  
INDEX  
100-0002  
Select the index print icon [, and  
press the SET button.  
e The Index Print Screen appears.  
PRINT  
EXIT  
3
Select PRINT, and press the SET  
button.  
e Printing begins.  
145 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To print the images that are set to print  
(print reserved images)  
Procedure to print all the images that are set to print.  
1
2
Make the print settings (page 98),  
and complete the printing setup  
(page 139).  
CONFIRM IMAGES 100-0002  
Select the print reserved images  
icon w, and press the SET  
button.  
9
DPOF  
DATE  
INDEX  
e The Confirm Print Images Screen  
appears.  
PRINT  
EXIT  
3
Select PRINT, and press the SET  
button.  
e Printing begins.  
e Printing begins about 1 minute  
after the SET button is pressed.  
e During printing, the remaining  
number of images to be printed is  
shown on the LCD monitor.  
HINT  
e In step 2, if you toggle the SET button to the left or right, you can confirm the  
images that are set to print and their DPOF settings.  
English 146  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO A PRINTER  
To change the printer settings and print  
images (change printer settings)  
Images are printed according to settings specified by the camera, such as  
paper type, size, layout, printing quality, etc.  
1
2
Complete the printing setup (page  
139).  
PRINTER SETTINGS  
Select the change printer settings  
icon v, and press the SET  
button.  
MEDIA TYPE  
PRINTER VALUE  
PRINTER VALUE  
PRINTER VALUE  
PRINTER VALUE  
PRINTER VALUE  
PAPER SIZE  
LAYOUT  
e The Printer Settings Screen  
QUALITY  
appears.  
DATE STAMP  
MEDIA TYPE:  
Specify the type of paper used for  
EXIT  
printing.  
PAPER SIZE:  
Specify the size of paper used for  
printing.  
LAYOUT:  
Specify how the images are to be arranged on the paper.  
QUALITY:  
Select the print quality for the images.  
DATE STAMP:  
Print the date the photo was taken.  
EXIT:  
Return to the Printing Mode Screen.  
147 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Adjust the printer settings.  
1 Toggle the SET button up or down  
to select a printer setting  
parameter, and press the SET  
button.  
d The screen to set the selected  
parameter appears.  
2 Toggle the SET button up or down  
to adjust the setting, and press the  
SET button.  
d The selected parameter is set,  
and you are returned to the  
Printer Settings Screen.  
d Follow the same procedure to  
adjust the other parameters, as  
desired.  
d The contents of the settings that  
can be made for each parameter  
will differ depending on the  
printer.  
<When PRINTER VALUEis selected>  
d The images will be printed  
according to the settings  
specified on the printer side.  
4
Select EXIT, and press the SET  
button.  
e You are returned to the Printing  
Mode Screen.  
Note  
e The printer setting parameters will differ depending on the printer that is  
connected.  
e To use printer functions which do not appear on your cameras Printer  
Settings Screen, select PRINTER SETTINGS.  
e If a function set by the camera is not available in the printer, the cameras  
printer settings will automatically change to PRINTER SETTINGS.  
English 148  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDICES  
COMMONLY ASKED QUESTIONS  
If you have a question about the camera operation, you might find the answer  
in this compilation of commonly asked questions.  
Question  
Cause  
Action  
Why doesnt the Due to cold  
power turn on? temperatures, the  
battery pack  
Place the camera in  
your pocket to warm it  
up before using it.  
temporarily lost its  
power.  
Why is the  
The ambient  
temperature is very  
low.  
Keep the battery pack  
in an environment of 10  
to 40°C.  
battery pack  
consumed so  
quickly even  
after it was fully  
recharged?  
Why doesnt  
recharging end? has expired.  
The battery pack life  
Replace with a new  
battery pack. If this is  
not effective, consult  
your dealer.  
Power  
Why does the  
The remaining battery Use the supplied AC  
pack power is low.  
adapter/charger, or  
replace the battery  
pack with a fully  
charged one.  
r
icon  
appear?  
While the flash is Battery pack power is Not a malfunction.  
recharging, why low, activating the  
When the flash is fully  
charged, the LCD  
monitor will turn on  
again.  
does the LCD  
monitor  
function that  
momentarily turns off  
the LCD monitor.  
suddenly turn  
off?  
149 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Question  
Cause  
Action  
Why does the  
multi-indicator  
light red?  
Recorded data is being Not a malfunction.  
saved on the card.  
Wait until the multi-  
indicator turns off.  
Why doesnt the The camera has  
Not a malfunction.  
Capture the image; the  
flash operate?  
determined that the  
image is bright enough camera will determine  
and the flash is not  
necessary.  
when the flash is  
necessary.  
Are the settings  
retained even  
after the camera  
is turned off?  
All settings except the  
self-timer and the  
exposure correction  
are retained even after  
the camera is turned  
off.  
Shoot-  
ing  
Which resolution  
setting should I  
use?  
Select the resolution  
setting according to the  
intended use:  
Y: Appropriate for  
printing letter-size or  
larger, and for printing  
a close-up of part of a  
photo (trimming).  
Z: For printing  
standard photo (photo  
service) sizes.  
[: For photos  
displayed on a web  
page, or sent as e-mail  
attachments.  
English 150  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMMONLY ASKED QUESTIONS  
Question  
Cause  
Action  
What is the  
difference  
between the  
digital zoom and  
the optical  
zoom?  
Because shooting with  
the optical zoom uses  
the optics of a physical  
lens, you can shoot  
without losing minute  
details in the image.  
The digital zoom, on  
the other hand, works  
by magnifying a portion  
of the image that hits  
the CCD sensor and  
may produce a coarser  
image.  
How can I get  
the distant view  
into focus?  
Set the scene select  
function to the  
Shoot-  
ing  
landscape + mode  
when photographing.  
The video clip I  
shot outdoors is  
completely  
Set the flicker-  
reduction setting to off  
p.  
white.  
Why does the  
The resolution setting Not a malfunction.  
resolutionsetting is fixed at [ when  
automatically  
the scene select  
function is set to Q or  
change to [  
when the scene the filter is set to (.  
select function is  
set to Q or the  
filter is set to  
(?  
151 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Question  
Cause  
Action  
Why does the  
flash setting  
automatically  
change to l  
The flash setting is  
Not a malfunction.  
fixed at l when the  
scene select function is  
set to Q or the filter is  
when the scene set to (.  
select function is  
set to Q or the  
filter is set to  
Shoot-  
ing  
(?  
Why doesnt the The digital zoom is  
Not a malfunction.  
digital zoom  
work when the  
filter is set to  
5 or (?  
deactivated in these  
filter modes.  
When used in  
cold weather,  
why does the  
image seem to  
leave traces as it  
moves?  
Condition due to the  
liquid crystals.  
Not a malfunction.  
Spots that appear in  
the LCD monitor only  
appear in the monitor  
and will not be  
recorded with the  
LCD  
monitor  
Monitor  
images.  
Why does the  
displayed image  
contain some  
red, blue and  
green dots, or  
black spots are  
visible?  
Why is the  
image too  
bright?  
The subject was too  
bright.  
When capturing an  
image, devise a way to  
compensate for a  
Viewing  
images  
bright subject, for  
example, by changing  
the shooting angle.  
English 152  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMMONLY ASKED QUESTIONS  
Question  
Why is the  
image out of  
focus?  
Cause  
Action  
The focus is not locked Hold the camera  
properly.  
correctly and slowly  
press the still image  
shooting button  
halfway to lock the  
focus. Then press the  
still image shooting  
button all the way to  
capture the image.  
Why is a part of The image was  
When capturing an  
image at close range,  
compose the image  
using the LCD monitor.  
the image  
missing?  
captured at close  
range.  
Why is there no This may happen when Play back images that  
Viewing  
images  
image (z is  
trying to play back  
images stored on a  
card from a different  
digital camera.  
were recorded on a  
card using this camera.  
shown)?  
Why do vertical If a bright subject is  
stripes appear? shot in the video clip  
shooting mode, vertical  
Not a malfunction.  
Not a malfunction.  
stripes may appear on  
the LCD monitor or in  
the image.  
Why isnt the  
Due to the  
magnified image characteristics of the  
clear?  
camera, magnified  
images appear less  
clear.  
153 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Question  
Cause  
Action  
Why isnt the  
The image was  
Not a malfunction.  
captured image captured using the  
clear?  
digital zoom.  
Can I play back  
image and  
sound data that I  
edited using my  
computer?  
We cannot guarantee  
the accurate playback  
of data that has been  
edited using a  
Viewing  
images  
computer.  
Why is there a  
The sound of the  
Not a malfunction.  
motor-like sound cameras mechanical  
during video clip action was recorded.  
playback?  
Why is there no The volume on the TV Adjust the volume on  
Con-  
necting  
to a TV  
sound?  
is set to the minimum. the TV.  
The volume of the  
camera is set to 0.  
Increase the playback  
volume of the camera.  
Why does a  
There is a problem with Please refer to the  
message appear the printer.  
Printing during  
PictBridge  
printing?  
instruction manual for  
your printer.  
The CAN NOT You have attempted to Select video clips that  
EDIT VIDEO”  
message  
appears.  
join video clips having have the same  
different resolutions or resolution or frame  
Image  
editing  
frame rates.  
rates.  
English 154  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMMONLY ASKED QUESTIONS  
Question  
Cause  
Action  
Why is a noise  
heard from a  
nearby TV or  
radio during  
battery  
Electromagnetic waves Move the AC adapter/  
are emitted from the  
AC adapter/charger.  
charger further away  
from the TV or radio  
when recharging  
batteries.  
recharging?  
Why does the  
CARD FULL”  
message  
There is no more  
available memory on  
the card.  
Erase unnecessary  
data.  
Use a card that has  
more memory  
available.  
appear?  
Why does the  
CARD IS  
PROTECTED”  
message  
The lock switch on the Move the lock switch to  
card is in the locked  
(protect) position.  
the unlocked position.  
appear?  
Misc.  
Why cant the  
camera be  
operated?  
A temporary internal  
Remove the battery  
circuitry problem may pack from the camera,  
be the cause.  
wait a few minutes,  
then reinstall the  
battery pack and try  
again.  
Can I use my  
camera abroad?  
When the camera is  
connected to a TV, you  
can switch the  
cameras video output  
to NTSC or PAL. If you  
have questions about  
using the AC adapter/  
charger and power  
cord abroad, please  
consult with a dealer  
near you for advice.  
155 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Question  
Cause  
Action  
Why does the  
SYSTEM  
ERROR”  
message  
appear?  
A problem has  
occurred within the  
camera or card.  
Check the following  
items  
1 Remove the card  
and then install it  
again.  
2 Remove the  
batteries and then  
install them again.  
3 Install a different  
card.  
Misc.  
If SYSTEM ERROR”  
still appears after  
performing the above  
steps, then take the  
camera to the dealer  
for service.  
English 156  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Before taking your camera to the repair shop, check the following table for a  
possible solution to the problem.  
CAMERA  
Refer-  
ence  
page  
Problem  
Cause  
Action  
No power.  
The battery pack is Recharge the battery  
dead.  
pack, or replace with  
a new battery pack.  
34,  
35  
The battery pack  
has not been  
inserted correctly.  
Reinsert the battery  
pack, making sure to  
orient it correctly.  
The camera  
turns off by  
itself.  
The power save  
function is  
operating.  
Press one of the  
operation buttons  
once.  
38  
The camera is  
set in the  
dockingstation,  
but it does not  
recharge.  
If a battery pack is  
set in the AC adapter/  
charger, the battery  
pack in the AC  
adapter/charger is  
recharged first, after  
which the battery  
pack in the camera  
starts to recharge. To  
speed up recharging  
of a battery pack, set  
it in the AC adapter/  
charger.  
Power  
157 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Refer-  
ence  
Problem  
Cause  
Action  
page  
An image is not The power is not  
captured when turned on.  
the still image  
When the power  
save function is  
active, after pressing  
one of the buttons to  
shooting button  
or video clip  
recording  
button is  
pressed.  
turn on the camera, if 38  
the shooting power is  
off, press the ON/  
OFF button to turn it  
on.  
An image is not The maximum  
captured when number of images  
the still image that can be captured  
shooting button or the maximum  
Install a new card.  
36  
Erase the images  
that are not  
necessary.  
Save the images to  
separate media, then  
erase all the images  
from the card.  
75,  
129  
or video clip  
recording  
button is  
video clip recording  
time has been  
reached.  
Shoot-  
ing  
pressed.  
The flash does The flash off mode Set the flash to  
not operate.  
is selected.  
automatic flash mode 60  
or forced flash mode.  
The flash does The battery pack is Recharge the battery  
34,  
35  
not operate.  
dead.  
pack, or replace with  
a new battery pack.  
The lamp mode Q Set to a different  
58  
is active.  
mode.  
A warning tone The battery pack is Install a sufficiently  
(beep-beep-  
beep) sounds,  
and it is not  
consumed.  
recharged battery  
pack.  
34,  
35  
possible to take  
a picture using  
the self-timer.  
English 158  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Refer-  
ence  
Problem  
Cause  
Action  
page  
When zooming The optical zoom  
Not a malfunction.  
Release the zoom  
switch, and press it  
again.  
in or out, the  
zoom  
has moved to the  
maximum  
61  
movement  
stops  
magnification  
position.  
Shoot-  
ing  
momentarily.  
There is noise The ISO sensitivity Set the ISO  
in the captured setting is too high.  
image.  
sensitivity to a lower  
setting.  
84  
64  
No playback  
image appears. not set to PLAY.  
The main switch is  
Set the main switch  
to PLAY.  
LCD  
monitor  
The image is  
too dark.  
The flash was  
blocked by a finger correctly, and make  
or other object.  
Hold the camera  
44  
sure the flash is not  
obstructed.  
The subject was too Capture the image in  
far away.  
the range of  
165  
operation of the flash.  
The subject was lit  
from behind.  
Use the forced flash  
mode.  
60  
86  
84  
Use the exposure  
correction function.  
View-  
ing  
images  
There is not enough Adjust the ISO  
light.  
sensitivity setting.  
The video clip The video clip was  
Set the flicker-  
reduction setting to  
picture is  
flickering.  
filmed under  
fluorescent lighting. on.  
83  
The image is  
too bright.  
The forced flash  
mode is selected.  
Select a different  
flash mode.  
60  
86  
84  
The subject was too Use the exposure  
bright. correction function.  
The ISO sensitivity Set the ISO  
setting is incorrect. sensitivity to t.  
159 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Refer-  
ence  
Problem  
Cause  
Action  
page  
The image is  
not in focus.  
The subject is too  
close to the camera. focus setting for your  
Select the correct  
82  
needs.  
The focus setting is  
not correct.  
The camera moved Hold the camera  
when the still image correctly and slowly  
shooting button was press the still image  
pressed.  
shooting button  
44,  
48  
halfway to lock the  
focus. Then press the  
still image shooting  
button all the way to  
capture the image.  
The focus is not  
locked properly.  
The lens is dirty.  
Clean the lens.  
22  
View-  
ing  
images  
The colors of  
the images  
captured  
This is due to  
ambient lighting.  
Capture the image  
using the forced flash 60  
mode.  
indoors are not  
correct.  
The white balance  
setting is incorrect. setting correctly.  
Set the white balance  
85  
A part of the  
image is  
missing.  
The handstrap or a Hold the camera  
finger was blocking correctly, and make  
44  
the lens or lens  
opening.  
sure the lens is not  
obstructed.  
NO IMAGEis There is no recorded Play back after  
shown.  
data for the selected capturing images or  
47  
71  
playback mode.  
making audio  
recordings.  
During audio  
The volume setting Select the volume  
playback, there on the camera is too icon Z and adjust  
is no sound. low. the volume.  
English 160  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Refer-  
ence  
Problem  
Cause  
Action  
page  
No image or  
sound.  
The digital camera is Follow the  
not correctly  
instructions to make  
connected to the TV. the connection  
correctly.  
130  
The TV input is not Set the input on the  
set correctly.  
TV to VIDEO.  
Con-  
necting  
to a TV  
The TV system  
setting is not correct. system.  
Set to the correct TV  
118  
71  
There is no  
sound.  
The volume setting Select the volume  
on the camera is too icon Z and adjust  
low.  
the volume.  
The edge of the This is a  
image is cut off. characteristic of the  
TV.  
Not a malfunction.  
129  
73  
You cannot edit The protect mode is Cancel the protect  
Image  
editing  
or rotate an  
image.  
set.  
mode.  
The NO  
CARD”  
message  
No card is inserted. Turn off the power  
and insert a card.  
36  
73  
appears.  
The  
You have attempted Set the protect  
PROTECTEDto erase data that is setting for the data to  
Misc. message  
protected from  
OFF.  
appears and  
accidental erasure.  
the data cannot  
be erased.  
The audio  
guide does not setting is set to  
sound. OFF.  
The audio guide  
Set the audio guide  
setting to ON.  
107,  
109  
161 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOCKING STATION  
Refer-  
ence  
Problem  
Cause  
Action  
page  
The remote The remote control  
Aim the remote  
control unit  
does not  
seem to  
work.  
unit is aimed at the TV control unit at the  
(not at the docking  
station).  
remote control sensor  
on the docking station  
(within a range of  
about 30 degrees  
horizontally from the  
docking station).  
Something is  
Remove or move the  
obstructing the space obstructing object.  
between the remote  
control unit and the  
remote control sensor  
on the docking station.  
132  
136  
Remote  
control  
unit  
The remote control  
unit battery is  
consumed.  
Replace with a new  
battery.  
The remote control  
unit battery is not  
correctly inserted.  
Take care that the (+)  
and () poles are  
correctly oriented.  
The remote control  
Operate the remote  
unit is too far from the control unit from a  
remote control sensor position up to 7  
on the docking station. meters from the  
docking station.  
The remote control  
Change the remote  
codes for the remote control code.  
control unit and the  
docking station are  
136  
different.  
English 162  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Camera  
Type  
Digital movie (recording and playback)  
Recorded image file Still images: JPEG format  
format  
(DCF, DPOF, Exif 2.2 compliant)  
Note: Designed mainly by the Japan Electronics and  
Information Technology Industries Association  
(JEITA), DCF (Design rules for camera file  
system) is standard for digital still camera  
image files to provide interoperability between  
digital photography devices for the images  
stored on removable memory cards. However,  
it is not guaranteed that all devices will support  
the DCF standard.  
Video clips:Conforms to ISO-standard MPEG-4  
format  
Audio: MPEG-4 audio (AAC compression)  
48 kHz sampling rate, 16-bit stereo format  
Data storage media SD Memory Card  
Camera effective  
number of pixels  
Approx. 3,200,000 pixels  
Image sensor  
1/2.7-inch CCD  
Virtual number of pixels: Approx. 3,340,000  
pixels, interlace scan, primary color filter  
Recording resolution 2,048 x 1,536 pixels (still images only)  
1,600 x 1,200 pixels (still images only)  
640 x 480 pixels  
320 x 240 pixels (video clips only)  
176 x 144 pixels (video clips only)  
Video clip frame rate 30 fps, 15 fps  
163 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Data compression  
(video clips only)  
: : 640 x 480 pixels, 30 fps: 3 Mbps  
8 : 640 x 480 pixels, 30 fps: 2 Mbps  
9 : 320 x 240 pixels, 30 fps: 640 kbps  
< : 320 x 240 pixels, 15 fps: 384 kbps  
= : 176 x 144 pixels, 15 fps: 256 kbps  
* The 30 fps frame rate of this camera is 29.97 fps,  
and the 15 fps frame rate is 29.97/2.  
White balance  
Lens  
Full-auto TTL, manual setting possible  
Optical 5.8x  
zoom lens  
f=5.8 mm to 33.8 mm  
(35 mm film camera conversion  
f=38 mm to 220 mm)  
Autofocus, 8 groups, 11 elements  
(including two with three aspheric  
surfaces)  
Galvanometer iris  
Internal ND filter  
Aperture  
Open F=3.5 (Wide) to 3.7 (Tele)  
Smallest F=8.0 (Wide) to 8.4 (Tele)  
Exposure control  
type  
Programmable AE  
Exposure correction available from the Shooting  
Setting Screen (0 1.8EV in 0.3EV steps)  
Light-measuring  
mode  
Multi-section measuring  
Range  
Total mode:  
10 cm to infinity (Wide end)  
80 cm to infinity (Tele end)  
Normal mode:  
80 cm to infinity  
Super Macro mode:  
2 cm to 60 cm (Wide end only)  
Digital zoom  
For shooting:  
1x to approx. 10x  
For playback:  
1x to 32x (varies with resolution)  
English 164  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Shutter Speed  
Still image shooting mode: 1/2 to 1/2,000 sec.  
(During flash: 1/30 to 1/60 sec.)  
Video clip shooting mode: 1/30 to 1/10,000 sec.  
Sensitivity  
Still image shooting mode:  
Auto (equivalent to ISO50 to 200)/equivalent to  
ISO50, ISO100, ISO200, and ISO400  
(switchable from Shooting Setting Screen)  
(Maximum ISO sensitivity up to 1600 variation:  
when scene select function is set to lamp Q)  
Video clip shooting mode:  
Auto (equivalent to ISO200 to 800)/equivalent to  
ISO200, ISO400, ISO800, and ISO1600  
(switchable from Shooting Setting Screen)  
LCD monitor  
1.5-inch low-temperature polysilicon TFT color liquid  
crystal display, translucent  
Approx. 110,000 pixels  
(Frame coverage: Approx. 100% when the AV  
cable is not connected)  
Flash working range GN = 3  
Approx. 10 cm to 1.2 m (Wide)  
Approx. 80 cm to 1.1 m (Tele)  
Flash modes  
Focus  
Auto-flash, forced flash, flash off  
TTL-type AF  
Self-timer  
Time/date  
2-second delay, 10-second delay  
Recorded with image data  
Ambient  
environment  
Temperature 0 to 40°C (operation),  
20 to 60°C (storage)  
Humidity  
30 to 90% (operating, no  
condensation)  
10 to 90% (storage, no condensation)  
Power supply  
Battery pack Li-ion battery pack (DB-L20) x 1  
Dimensions (excluding protrusions) 69 (W) x 108 (H) x 34 (D) mm  
(Maximum dimensions)  
Volume: Approx. 149 cc  
Weight  
Approx. 155 g (Only the camera  
(without battery pack and card))  
165 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera connectors  
DIGITAL/AV  
Regrouped jack  
(communication/  
sound and image  
output) terminal  
Audio output 265 mVrms (9 dBs), 12 kor less,  
stereo  
Video output 1.0 Vp-p, 75 unbalanced, sync  
negative, composite video, NTSC  
color TV system/PAL TV system  
(switchable from the Option Setting  
Screen)  
USB  
USB 2.0 (Full speed)  
DC IN (external DC  
DC 4.7 V (for exclusive use with the supplied AC  
power input) terminal adapter/charger)  
Battery pack operation  
Shooting  
Video clip recording mode 60 minutes:  
Recorded in TV-S mode (320x240 pixels, 30  
fps)  
Still image shooting mode 160 images:  
LCD monitor on, images captured at 20-second  
intervals, and flash used 1 in 3 times  
Playback  
130 minutes:  
LCD monitor on, continuous playback  
e Until battery pack runs out when using a fully charged battery pack at a 20°C  
ambient temperature.  
e The operation time may vary depending on the conditions of the battery pack  
and the conditions of use. Especially when used at temperatures below  
10°C, the battery pack operation time is drastically reduced.  
English 166  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Possible No. of Images/Possible Shooting  
Time/Possible Recording Time  
The table shows the possible number of images, the possible shooting time,  
and the possible recording time for the supplied 128MB SD Memory Card, and  
for the commercially available 512MB/16MB SD Memory Card.  
Shooting/  
recording  
mode  
Reso-  
lution  
SD Memory Card  
512 MB  
128MB  
16 MB  
14 images  
22 images  
112 images  
35 sec.  
setting  
Y
Z
[
:
8
9
<
=
122 images  
491 images  
Still image  
mode  
195 images  
785 images  
978 images  
3,920 images  
21 min. 2 sec.  
30 min. 39 sec.  
1 hr. 21 min.  
2 hr. 3 min.  
5 min. 14 sec.  
7 min. 37 sec.  
20 min. 10 sec.  
29 min. 11 sec.  
37 min. 36 sec.  
52 sec.  
Video clip  
mode  
2 min. 18 sec.  
3 min. 31 sec.  
4 min. 36 sec.  
2 hr. 42 min.  
Sound  
recording  
mode  
2 hr. 9 min.  
8 hr. 40 min.  
14 min. 27 sec.  
e Even with cards of the same capacity, the amount of data that can actually  
be stored may differ depending on the card brand, etc.  
e The continuous shooting time for each video clip will differ depending, for  
example, on the card capacity, environmental conditions (temperature and  
shooting conditions, etc.).  
167 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Docking station  
Part number  
PDS-C1  
Power supply  
DC 4.7 V  
Rated output  
DC 4.2 V/4.7 V  
Compatible batteries  
Supplied or separately sold Li-ion battery pack  
(DB-L20)  
Ambient  
Temperature 0 to 40°C (recharge), 20 to 60°C (storage)  
environment  
Humidity  
10 to 85% (no condensation)  
94 (W) x 35.5 (H) x 94 (D) mm  
Weight (without power cord) Approx. 74 g  
AC 125 V, 3 A  
Dimensions  
Weight  
Power cord rated value  
e When using the supplied AC adapter/charger abroad, the power cord may  
need to be replaced in accordance with local requirements. Please contact  
your local dealer for details.  
Remote control unit  
Part number  
Power supply  
Dimensions  
Weight  
BRC-C1  
Lithium battery (CR2025)  
35 (W) x 56.6 (H) x 6.5 (D) mm  
Approx. 15 g (including battery)  
English 168  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Supplied AC adapter/charger  
Part number  
VAR-AL20  
Power supply  
AC 100 V to 240 V, 50/60 Hz, 0.27 A to 0.17 A,  
23 VA to 32 VA  
Rated output  
DC 4.2 V, 0.6 A (charging)  
DC 4.7 V, 2.0 A (DC output)  
Compatible battery  
Supplied or sold separately Li-ion battery pack  
DB-L20  
Ambient  
Temperature 0 to 40°C (operation), 20 to 60°C (storage)  
environment  
Humidity  
20 to 80% (no condensation)  
60 (W) x 33 (H) x 90 (D) mm  
Approx. 175 g  
Dimensions  
Weight  
Supplied Li-ion battery pack  
Part number  
DB-L20  
Voltage  
3.7 V  
Rated output  
720 mAh  
Ambient  
environment  
Temperature 0 to 40°C (during use, recharged)  
10 to 30°C (storage)  
Humidity  
10 to 90% (no condensation)  
39.4 (W) x 6.0 (H) x 35.5 (D) mm  
Approx. 19 g  
Dimensions  
Weight  
169 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplied SD Memory Card  
Memory capacity  
128MB  
Ambient  
Temperature 0 to 55°C  
environment  
Humidity  
20 to 85%  
Dimensions  
Weight  
32 (H) x 24 (W) x 2.1 (D) mm  
Approx. 2 g  
English 170  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Others  
Apple, Macintosh and QuickTime are trademarks or registered trademarks of  
Apple Computer Inc.  
Windows and Windows NT are registered trademarks of Microsoft Corporation.  
All other company and product names are registered trademarks or trademarks  
of their respective owners.  
Caution  
e It is forbidden to copy this manual, whole or in part, without prior written per-  
mission.  
e All images and illustrations given in this manual are for explanation purposes  
and may differ slightly from that of the actual product. Also, actual specifica-  
tions are subject to change without prior notice and therefore may differ from  
the contents of this manual.  
e Sanyo Electric shall not be held responsible for any problems resulting from  
the use of this camera.  
e Sanyo Electric declines all responsibility for damages due to improper use of  
the camera, failure to adhere to the instructions given in this manual, or  
repairs or changes done by those other than a technician authorized by the  
manufacturer.  
e Sanyo Electric shall not be held responsible for any damage caused by  
optional devices or consumable items used with the camera other than those  
supplied with the camera or those specified by Sanyo Electric.  
e Sanyo Electric shall not be held responsible for any losses or loss of revenue  
resulting from the loss of data caused by the malfunction, or the repairing of  
a malfunction, of the camera.  
e The images captured with this camera will differ in quality from pictures taken  
with a standard film camera.  
171 English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed on recycled paper  
1AG6P1P1704--  
SANYO Electric Co., Ltd.  
Printed in Japan  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SX613/EX, U (1003KP-SY)  

RCA Tablet Accessory RCT6077W2 User Guide
RCA VCR VGM300 User Guide
Rotel Power Supply RB 971 User Guide
Samsung Air Conditioner AP500PF User Guide
Sanyo Battery Charger HR 4U User Guide
Sanyo Camera Accessories UR 521 User Guide
Sanyo Flat Panel Television LCD 37XR9DA User Guide
Sanyo Security Camera VCC N4598PC User Guide
Schumacher Calculator PI 1500 User Guide
Sears Humidifier 75814808 User Guide