ECD-T1540
SIRIUS SATELLITE RADIO OPERATING MANUAL
VOLUME
45W x 4
MANU/SKIP
S-MOD
SAT
LOUD/
ENTER
P. S C A N
Full Panel Detachable
High Power FM/AM Stereo Receiver
Compact Disc Player
ISO Mounting with Removable Trim Ring
Sirius Function
Remote Control Ready
CD-R/RW Compatibility
(English)
SIRIUS OPERATION……………. 2~3
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIRIUS MODE SELECTION ...........................…..(5)
Press LOC/S-MOD button (5) to switch Category mode, Skip mode or normal. It is used as the
selection of each:
Normal
Category mode
Direct Tune
Skip Channel mode
When Category mode or Skip mode is engaged, the “CATEGORY” or “SKIP” function is turned
on in the display. When Category mode or Skip mode is released, the “CATEGORY” or “SKIP”
function is turned off. When Direct mode is engaged, “DIRECT” of alphanumeric display is turned
on.
Select Category and TUNE UP/DOWN within selected Category
Use CAT button (7) or
CAT button (6) to select desire Category and press
BND/LOUD/ENTER button (2).
In Category mode, stations can be tuned within the same category.
-
When the user wishes to search by Category, press LOC/S-MOD button (5) can be pressed
until it goes into Category search mode.
-
-
Press CAT button (7) or
To change channels, press LOC/S-MOD button (5) again to Normal mode, and then press
MANU/SKIP or button (3) to select the channel up or down.
CAT button (6) up and down to get to the desired category.
The operation of skip channel function
In Skip mode, pressing LOC/S-MOD button (5) for more than 3 seconds sets the SKIP channel
mode. Details for set or release skip channel is as follows.
Use MANU/SKIP
or
button (3) to be switched to SKIP channel set or release mode
sequentially.
-
-
Press BND/LOUD/ENTER button (2) to select skip or release the following channel. (If the
channel was skipped, the “SKIP” icon will be displayed.
Press LOC/S-MOD button (5) for more than 3 seconds again to return to basic mode
automatically after 10 seconds.
Note:
In skip mode, use MANU/SKIP
or
button (3) to show skipped channels.
How to direct tune
1. In direct mode, display shows DIRECT and “000” channel number. (Hundred Digit flashing
on/off)
2. Use MANU/SKIP
or
button (3) to select hundred digit.
3. Press LOC/S-MOD button (5) again to confirm entry of the hundred digit and the 10s digit is
flashing on/off.
4. Use MANU/SKIP
or
button (3) to select 10s digit.
5. Press LOC/S-MOD button (5) again to confirm entry of the 10s digit and the 1s digit is
flashing on/off.
6. Press LOC/S-MOD button (5) again to confirm entry of the 1s digit.
7. Press BND/LOUD/ENTER button (2) to direct tune.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
21605 Plummer Street
Chatsworth, CA91311
ECD-T1540. Issue Number 1.
Printed in Hong Kong
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|