WASHING MACHINE
User’s Manual
FEATURE ..............................................................1
SAFETY INSTRUCTIONS .................................... 2
DESCRIPTION OF PARTS ....................................3
CONTROL PANEL ................................................4
WASHING PROCEDURE ......................................5
Fuzzy course ..........................................................5
Blanket course ......................................................5
Speedy course ......................................................5
Wool course ..........................................................5
Thobe course ........................................................5
Delay start course ..................................................5
MANUAL FUNCTIONS ..........................................6
INSTALLATION & MAINTENANCE ......................7
Environment ..........................................................7
Assembling the part protection panel ....................7
How to assemble the legs ......................................7
In case of pump-drained washer ............................7
Connecting the drain hose ....................................7
Connecting the water supply hose ........................8
In case of cold-hot washer ....................................8
Levelling ................................................................8
Please read this manual before using and note
Water supply connector filter ..................................8
how to use in the proper manner.
How to put the detergent in and add the
Please be careful of keeping the manual.
Otherwise, it should be bought separately.
fabric softener..........................................................9
How to clean the filter ............................................9
Cleaning the filter net ............................................9
TROUBLESHOOTING
SPECIFICATIONS
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
CODE NO. : DC68-01518Q
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
Please note that the following precautions for safety intend to prevent unpredictable danger and damage
by helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50˚C.
• Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.
WARNING
CAUTIONS
There might be a slight injury or damage when you
violate this instruction.
There might be serious injury or fatal accident when
you violate this instruction.
If the power supply cord or plug is damaged or
loosened, do not use.
Don’t’ install it in the area with moisture or outdoor
where it has rain or snow
• An electric shock or a fire may take place.
• An electric shock or a fire may take place.
Do not pull the cord off or touch it with moist hands.
• An electric shock or a fire may take place.
Please unplug the power supply cord when you do
not use it.
• An electric shock or a fire may take place.
Do not bend the power supply cord by force or
press it with heavy things.
• An electric shock or a fire may take place.
If there is dust or water on the power supply plug
and its connected part, please remove it completely.
• An electric shock or a fire may take place.
Do not install the washer nearby electric implement or
don’t put a candle light or cigarette light on the washer.
• A fire may take place.
Do not make your kids look into the inside of the
washer.
• If your kid falls into the washer, his life could be
Do not disassemble, repair or remodel it recklessly.
• When you need to repair it, please call service
agent. An electric shock or a fire may take place.
in danger.
Ventilate immediately without touching the power
plug if gas is leaking.
• An electric shock or a fire may take place if it
catches flame.
During operation, do not put your hands or metal
materials under the washer.
• You may be hurt by spinning board beneath
the washer.
If the washer makes strange noise, smell or smoke,
unplug it promptly and call service agent.
• An electric shock or a fire may take place.
Stay away from the washer when the bottom of the
washer sinks into the water.
• There might be an electric shock. Please
wait until the water drains out completely.
When cleaning, don’t spray water to the parts of the
washer directly.
• It may make it’s life span shorten.
Also an electric shock or fire may take place
Do not put laundry stained with gasoline, benzene,
or alcohol in the washer, and keep the materials
away from the washer.
Don’t use several appliances together with an outlet.
• A fire may take place due to unusual heat.
• An explosion or a fire may take place.
During spinning, don’t put your hand in the spinning tub.
• It may hurt your hands. If it does not stop within
15 seconds after you open the lid, call
service agent immediately.
Don’t press the button with an awl or pin.
• An electric shock or a fire may take place.
Child-Lock function: This is a device to protect children from being accidentally hurt while play-
ing with the washer.
How to start the Child-Lock function:
- Press the "Power" button to go to an initial washing mode.
-
By pressing "Start/Hold" button, you start washing and in case Child Lock function is needed during the laundry
- Push the "Course" button and get the function started.
(Note: You cannot perform the function without the "Power" button on.)
In the event that you would like to modify the Child-Lock function, "L" signal flashes in the "signal window
showing the rest of the set time" every two seconds, which means it is locked and indicates how much
time is left until the function is released.
To release the function of Child-Lock:
- In case the "Child-Lock" is programmed, press both the "Function" and "Course" buttons in sequence.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION OF PARTS
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL PANEL
For more details, see control panel of your washing machine.
POWER BUTTON
POWER
Press this button once to operate.
Press once again to turn the power off.
START/
HOLD
START/HOLD BUTTON
Use to pause and restart the operation.
To change the washing procedure during operation, press this button to stop,
and once again to restart after changing the procedure.
DELAY
START
DELAY START BUTTON
Press this button when delay start washing is needed.
COURSE
COURSE SELECT BUTTON
With every press of this button, the washing course changes;
FUZZY ➔➔BLANKET➔➔SPEEDY➔➔WOOL➔THOBE ➔➔FUZZY
FUNCTION
FUNCTION SELECT BUTTON
With every press of this button, the function changes;
SOAK,WASH,RI NSE,SPI N ➔➔WASH ➔➔RINSE ➔➔SPIN ➔➔WASH&RINSE ➔➔
RINSE&SPIN ➔➔WASH,RINSE,SPIN
WATER LEVEL SELECT BUTTON
According to the washload,select the water level ;
WATER
LEVEL
MEDIUM ➔➔HIGH ➔➔EXTRA LOW ➔➔LOW
WATER
SUPPLY
WATER SUPPLY SELECT BUTTON
As you press this button, the type of water is selected as follows.
COLD ➔➔COLD + HOT ➔➔HOT ➔➔COLD
REMAINING TIME INDICATOR LIGHT
The indicator light shows the remaining time (in minutes) of each wash cycle.
At the end of the cycle,the power automatically switches off.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
WASHING PROCEDURE
Before starting washing, check the following;
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
Connect the water supply hose to the water tap. Leave a tap
open. Plug the power cord in. Make sure to lay down the
drain hose. (In case no drain pump)
CAUTION . . .
FUZZY COURSE
-Do not use water above 30˚C for WOOL washing.
-Refer to the tag attached on the clothes for washing
information.
-Fasten buttons and turn inside out before washing.
-Use the detergent indicated in the laundry.
-When the degree of dirt is extreme, soak the laundry in warm
water for about 10 minutes before pressing the WOOL course
button in order to enhance washing efficiency.
Selects the best washing course
automatically.
POWER
1. Press the POWER Button to"ON".
START/
HOLD
2. Press the START/HOLD button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
3. Close the lid.
THOBE COURSE
BLANKET COURSE
1.Press the power button to "ON".
1. Press the power button to "ON".
POWER
POWER
2.Press the course select three times.
2. Press the course select
button once.
3.Press the START/HOLD button.
Water level is selected automatically.
COURSE
COURSE
3. Press the START/HOLD button
Washing,rinsing, and spinning follow.
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
If you want to pause, press the START/HOLD
button again.You can change the course
when paused.
START/
HOLD
START/
HOLD
button again.You can change the course when paused.
4. Close the lid.
4. Close the lid.
DELAY START COURSE
Select this course when you have to go out or do
something else.
SPEEDY COURSE
POWER
1. Press the power button to "ON".
POWER
1. Press the power button to "ON".
2. Press the course select button twice.
COURSE
2. Press the DELAY START button once.
3. Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
You may change the delay start time with
DELAY
START
START/
HOLD
use the DEALY START button.
(from 3 hours to 18 hours)
button again.You can change the course when paused.
START/
HOLD
3. Press the START/HOLD button and put
the proper amount of detergent into tub.
4. Close the lid.
4. Close the lid.
The washing finishes by the time you
reserved.
WOOL COURSE
POWER
1.Press the power button to "ON".
2.Press the course select three times.
COURSE
3.Press the START/HOLD button.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course
START/
HOLD
when paused.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL FUNCTIONS
Each washing course changes manually.
Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash - Start/Hold button
SOAK FUNCTION (Including WASH, RINSE, SPIN)
Press the POWER button.
Select the course(Press the course button).
➔➔FUZZY, BLANKET, SPEED, WOOL, THOBE.
START/
HOLD
FUNCTION
POWER
COURSE
Press the FUNCTION SELECT button once.
Press the START/HOLD button once.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
once
WASH ONLY
Press the POWER button.
Press the FUNCTION SELECT button twice.
Press the START/HOLD button once.
START/
HOLD
POWER
FUNCTION
Washing goes on for 18 minutes.
When the FUNCTION button is pressed during washing, the wash
time can be changed to between 3 and 24 minutes in duration.
twice
RINSE ONLY
Press the FUNCTION button three times.
Press the START/HOLD button once.
Rinsing goes on for 15 minutes.
START/
HOLD
POWER
FUNCTION
When the FUNCTION button is pressed during rinsing, the rinse
times can be changed to between 1 to 5 times in duration.
three times
SPIN ONLY
Press the FUNCTION button four times.
Press the START/HOLD button once.
Spin drying goes on for 11 minutes.
START/
HOLD
POWER
FUNCTION
four times
When the FUNCTION button is pressed during spinning,
the spin time can be changed to from 5 to 11 minutes.
WASH AND RINSE
Press the FUNCTION button five times.
Press the START/HOLD button once.
START/
HOLD
POWER
FUNCTION
Washing and rinsing go on for 38 minutes.
When the FUNCTION button is pressed during working, the rinse
times can be changed to between 1 to 7 times in duration.
five times
RINSE AND SPIN
Press the FUNCTION button six times.
Press the START/HOLD button once.
START/
HOLD
POWER
FUNCTION
Rinsing and spin drying follow.
When the FUNCTION button is pressed during working, the rinse
times can be changed to between 1 and 5 times in duration.
six times
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION & MAINTENANCE
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
ENVIRONMENT
Never install the washer near water.
Leave some space
Do not place the washer in steamy rooms or where the
washer is directly exposed to rain.Moisture may destroy the
electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic and electrical components are affected by direct
heat,never place the washer near furnaces, boilers, etc.
Do not place under direct sunlight.
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface,
noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
ASSEMBLING THE PRAT PROTECTION PANEL
1.Insert the sound
absorbing panel
to the assembling
hole on front side
Tilt the washer a little and lift up the panel until it clicks,
finally fix the panel with screw to the base as shown
in the figure.
to the end.
REAR SIDE
Anti-rat cover
2.If you have difficulty
inserting the panel
lift up the washer a
little and insert it
HOW TO ASSEMBLE THE LEGS
1. Check the 4 Legs.(Front-right. Front-left.
Rear-right. Rear-left)
Hook
Hole
2. Lay down the Washing Machine to the front.
3. Insert the hook of leg in to the square hole
of base.
2
1
Base
4. Push the leg to the arrow direction to “Click”.
5. Finaly fix the legs on the base
with screw like a figure.
Screw
IN CASE OF PUMP-DRAINED WASHER
Take out the cap-hose and Be sure to join tightly the drain hose into
Be sure to join tightly the drain
hose into the drain-outlet
on the side of the machine.
Install the drain hose in the
position of about 90~100cm
above the ground.
connect the outlet-hose.
the drain-outlet on the back of the
machine.
cap-hose
outlet-hose
CONNECTING THE DRAIN HOSE
After pressing the joint ring(a), insert the drain hose(b)
to drain direction.
(a)
(b)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE WATER SUPPLY HOSE
1. Remove the adaptor
from the water
supply hose.
5. Connect the other end of the water
supply hose to the inlet water valve
at the back of the washer.
Screw the hose clockwise all the
way in.
2. First,using a "+" type screw
driver, loosen the four screws
5-1.Connect the other end of the water
supply hose to the inlet water valve
at the top of the washer.
a
on the adaptor.
Next,take the adaptor and
turn part(b) following the arrow for
gap about 5mm between them.
Screw the hose clockwise all the way in.
b
3. Connect adaptor to the
water tap by tightening
If the water tap is a screw type,assemble
a water supply hose that fits to the
tap as shown.
the screws firmly.
a
Then, turn part (b)
b
following the arrow and
put (a) and (b)together.
4. Connect the water supply hose to
the adaptor. Pull down the part (c)
of the water supply hose .When
NOTICE After completing connection, if water leaks from the hose,
then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big,remove the spacing
ring before inserting the faucet into the adaptor.
the part (c)is released, the hose
c
is automatically connected to the
adaptor making a 'click' sound.
hot
IN CASE OF COLD-HOT WATER WASHER
cold
•
If you use only cold water inlet hose,
you must fit the cap to the hot water
inlet valve as following.
cap
•
If the washer is not leveled with the ground, it makes the machine tremble more
or be out of order. So, make sure that the washer is leveled properly.
LEVELLING
Adjustment the heigt of the machine
Adjust the legs to level the washer
Be careful not to put in your hand under the legs.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
• Open the lid of the machine, pour water into the tub up to the
level
just below the pulsator, and adjust the legs so that the pulsator is
Pull the handles located at the
right and left of the front side
and slide off.
positioned at the center of the water as
shown in the figure.
Adjust the height of the machine
upward or downward.
•
Place the machine more
than 10cm away from the
wall.
When the adjustment
is finished, push the handles
to fix the adjusting legs.
•
Adjust the legs on feet
WATER SUPPLY CONNECTOR FILTER
inlet water
valve
1.Pull out the filter and wash well.
2. Pull in the filter and connect
the hose to the inlet water
valve tightly.
3. Check if there is a leakage.
Note to tighten up the
connector.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO PUT THE DETERGENT IN AND ADD THE FABRIC SOFTENER
1.Open the detergent box by pulling in the direction of the arrow as shown in the
figure and then put the powder detergent in the detergent box.
2. Put in one-time amount of detergent evenly so the detergent may not brim over the box.
Detergent Device
Softener Device
Put the detergent
in proportion to
water level
Softener Device
Softener
baseline
•
When a proper amount (one time does) of fabric
softener is stored in the softener inlet,it is
automatically put in at the last rinsing cycle.
Do not use detergent, bleach or starch into
the Softener Inlet.
•
•
Do not open the lid during the Spin Dry cycle.
If added too early, its effectiveness will decrease.
Do not leave the softener
into the Softener
Dispenser for a long time.
Because softner
•
•
Using too much softener may produce
unsatisfactory results.
became stiff.
CAUTION : If softener is stored over the above base line, it may flow down at any time.
HOW TO CLEAN THE FILTER
1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise
and pull out the filter.
3. Remove dirts and rotate
the filter clockwise
(pump drained washer)
1.Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and
remove dirts.
until it locks in position.
4. Reassemble in
reverse order.
CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.
1. Push the upper part
of the filter and pull in.
2. Open the cover as
shown in the figure.
3. Clean the filter.
4. Close the cover and insert the
lower part of the filter in the
basket first and then push the
filter with "click" sound .
1. Push up and
pull out the filter net.
2. Remove the collected
lint from the filter net.
3. Clean the filter.
4. Pull down the filter net.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Water dose not drain
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
Is there enough water?
If the water dose not drain in 15
minutes, a buzzer will sound,
and the remaining time indicator
will show "E / 5E".
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?
Spinning does not work
Is the laundry spread out evenly
in the washer?
If water is not supplied in 1 hour,a
buzzer will sound, and the remaining
time indicator will show "4E / 7E".
Is the washer set on a sturdy
flat surface?
Water is overflowed
Restart after spinning.
If the error sign still indicates,
call agency.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
IN CASE THE NEED FOR SERVICING ARISES.
If any problem occurs with your products,do not hestitate to call any nearby.
Name, address, telephone number is required.
SPECIFICATIONS
WASH
SPIN
426 W
270 W
RATED POWER
CONSUMPTION
HIGH
MEDIUM
LOW
75 l
55 l
42 l
DIMENSIONS (mm)
W600xD637xH968
STANDARD
WATER LEVEL
48 kg
WEIGHT
0.05~0.78 MPa
(0.5 ~ 8.0 kg f/cm )
E/LOW
31 l
WATER PRESSURE
2
.
WATER USAGE
202
l
PLUSATOR ROTATING SPEED
SPINNING TUB ROTATING SPEED
Stirring Type
100 rpm
680 rpm
WASHING TYPE
Download from Www.Somanuals.com. All Manuals Search And Download.
|