00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 1
WORLDWIDE VIDEO
CASSETTE RECORDER
SV-7000W
Owner’s Instructions
VCR
POWER
EJECT
INDEX
REC.SPEED CLK/COUNT
PICTURE
STROBE
ART
TIMER
AUDIO
2
5
8
0
3
6
1
4
INPUT
CH
9
7
100
CLR/RST
L
REC
P/STILL
STOP
DISPLAY
MONITOR
A.DUB
INPUT
SYSTEM
OUTPUT
SYSTEM
OK
AUTO
MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-0_sea 7/24/01 10:53 AM Page 2
IMPORTANT SAFETY INSTRUCTIONS
5. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Attachments-Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. Water and Moisture-Do not use this product near water-for example near a bath tub, wash bowl, kitchen
sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories-Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury to a child or adult, and serious dam-
age to the product. Use only with a cart, stand, tripod, bracket, or table recommended
by the manufacturer or sold with the product. Any mounting of the product should fol-
low the manufacturer's instructions and should use a mounting accessory recommended
by the manufacturer.
9. Cart Usage-A product and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and cart combination to overturn.
10. Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper venti-
lation is provided or the manufacturer's instructions have been adhered to.
11. Power Sources-This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult your product dealer
or local power company. For products intended to operate from battery power, or other sources, refer to
the operating instructions.
12. Grounding or Polarization-This product may be equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is
a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety pur-
pose of the polarized plug.
13. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
NEC-NATIONAL ELECTRICAL CODE
14. Outdoor Antenna Grounding-If an outside antenna or cable
system is connected to the product, be sure the antenna or cable
Antenna Lead-in Wire
system is grounded so as to provide some protection against
voltage surges and built-up static charges. Section 810 of the
National Electrical Code, ANSI/NFPA 70 provides information
with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
Ground Clamp
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Grounding Clamps
Power Service Grounding
Electrode System
(NEC Section 810-21)
unit, size of grounding conductors, location of antenna-dis-
charge unit, connection to grounding electrodes, and require-
ments for the grounding electrode.
Electric Service Equipment
15. Lightning-For added protection for this product during a lightning storm or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable sys-
tem. This will prevent damage to the product due to lightning and power-line surges.
16. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from touching such power lines or cir-
cuits as contact with them might be fatal.
17. Overloading-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
II
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-0_sea 7/24/01 10:53 AM Page 3
18. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
19 Servicing-Do not attempt to service this product yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20 Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a
b
c
d
When the power-supply cord or plug is damaged.
If liquid has been spilled or objects have fallen into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation.
e
f
If the product has been dropped or damaged in any way.
When the product exhibits a distinct change in performance-this indicates a need for service.
21. Replacement Parts-When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
22. Safety check-Upon completion of any service or repairs to this product, ask the service technician to per-
form safety checks to determine that the product is in proper operating condition.
23. Heat-The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
III
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-0_sea 7/24/01 10:53 AM Page 4
Quick Look-Up Guide
GB
To record a Program now
To record a Program and
let it stop automatically
To record a Program when
you’re away
6
CH
9
SPEED CLK/COUNT
PICTURE
STROBE
ART
TIMER
AUDIO
INPUT
POWER
EJECT
NORMAL(VHS)
SQPB ONLY
TRACKING
S
P
E
E
D
A
U
D
I
O
O
U
T
LINE
1
IN
CLR/RST
RESET
CHANNEL
L
R
VIDEO
AUDIO
2
5
3
6
INPUT
OUTPUT
AUTO
NTSC
THROUGH
PAL
NTSC
NTSC4.43
PAL
SECAM
REC
PAUSE/STILL
MESECAM
PLAY
STOP
SECA
M
PAL-N
PAL-M
REW
F.F
PAL-N
PAL-M
L
Insert the cassette.
Insert the cassette.
Press the TIMER button on the
remote control.
Insert the cassette.
Select the channel by pressing the
CH buttons (
or
) on the
remote control.
6
L
CLOCK: 1/JAN WED 12:32
CH
CH DAY START
®STOP
¨
--- ------:--
--- ------:--
--- ------:--
--- ------:--
--- ------:--
--- ------:--
¹
®
®
®
®
®
®
--:--
--:--
--:--
--:--
--:--
--:--
¨¨
¨¨
¨¨
¨¨
¨¨
¨¨
9
REC
P/S
STOP
CLR/RST
DISPLAY
MONITOR
A.DUB
SET:
¨
DELETE:CLR/RST
MENU
L
Enter the Timer program data.
Then press the MENU button.
Select the channel by pressing the
Press REC for at least one second
to start recording.
CH buttons (
or
) on the
remote control.
REC
P/S
STOP
VCR
POWER
DISPLAY
MONITO
A.DUB
INDEX
REC.SPEED CLK/COUNT
PICT
Press REC several times until the
required recording time is
displayed.
Result: Recording stops automati-
cally at the end of the
required time.
Press VCR POWER to turn off the
VCR and to activate the timer.
Press REC for at least one second
to start recording.
When you have finished recording,
press STOP ( ).
1
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 2
Contents
GB
◆ FOREWORD
■
Safety Instructions.........................................................................................
Getting Started ..............................................................................................
4
5
■
◆ VCR OVERVIEWS
■
■
■
■
Front View of the VCR...................................................................................
6
6
7
7
Rear View of the VCR ...................................................................................
Display Indicators ..........................................................................................
Infrared Remote Control................................................................................
◆ CONNECTING YOUR VIDEO CASSETTE RECORDER
■
■
■
■
■
■
■
Worldwide VCR Background ........................................................................
Worldwide TV Color System..........................................................................
Multi-System VCR vs Worldwide VCR ..........................................................
System Conversion with the Worldwide VCR................................................ 10
Tape Conversion with the Worldwide VCR ................................................... 11
Deciding How to Connect Your VCR............................................................. 13
Connecting Your VCR to the TV.................................................................... 14
8
8
9
◆ SETTING UP YOUR VIDEO CASSETTE RECORDER
■
■
■
■
■
■
■
■
■
■
Inserting the Batteries in the Remote Control................................................ 15
Plug and Initial Setting................................................................................... 15
User Set1 Setting .......................................................................................... 16
User Set2 Setting .......................................................................................... 16
Setting the Date and Time............................................................................. 17
To turn On-Screen Information on/off............................................................ 17
Setting the VCR RF out System.................................................................... 18
Setting the RF OUT CHANNEL..................................................................... 19
Presetting the Stations Automatically............................................................ 20
Presetting the Stations Manually................................................................... 21
◆ RECORDING TELEVISION BROADCASTS
■
■
■
■
■
■
■
■
■
■
■
Selecting the Cassette Type.......................................................................... 22
Selecting the Recording Speed..................................................................... 22
Protecting a Recorded Cassette.................................................................... 22
Recording a Program .................................................................................... 23
Stopping a Recording Temporarily................................................................ 23
Recording a Program with Automatic Stop.................................................... 24
Using the Timer Programming Feature ......................................................... 25
VCR Plus+ Recording (AMERICA only)........................................................ 26
VCR Plus+ Set up (AMERICA only).............................................................. 27
Checking a Preset Recording........................................................................ 28
Cancelling a Preset Recording...................................................................... 28
◆ PLAYING BACK
■
■
■
■
■
■
■
■
Playing a Cassette......................................................................................... 29
Selecting the PLAY SYSTEM Mode.............................................................. 29
Receiving Stereo Broadcasts ........................................................................ 30
Receiving SAP Broadcasts............................................................................ 30
SQPB (Super VHS Quasi PlayBack)............................................................. 31
Adjusting Picture Alignment Manually ........................................................... 31
Adjusting Picture Sharpness ......................................................................... 32
Selecting the Audio Output Mode.................................................................. 32
2
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 3
Contents (cont.)
GB
◆ REWINDING AND FAST-FORWARDING
■
■
■
Rewinding and Fast-forwarding a Cassette................................................... 33
Playing a Cassette in Slow Motion ................................................................ 33
Playing a Sequence Frame by Frame........................................................... 34
■
Playing a Sequence at Variable Speeds ....................................................... 34
◆ SPECIAL FUNCTION
■
■
■
STROBE........................................................................................................ 35
ART ............................................................................................................... 35
MONITOR...................................................................................................... 35
◆ SEARCHING FOR A SEQUENCE
■
Searching for a Specific Sequence ............................................................... 36
Using the Tape Counter ................................................................................ 37
■
◆ ADVANCED RECORDING FEATURES
■
■
■
■
■
■
■
■
■
Using the Assemble Edit Function................................................................. 38
Connecting Other Equipment to Your VCR................................................... 39
Recording from Another VCR or Camcorder................................................. 40
TV System Conversion.................................................................................. 41
Playback Conversion..................................................................................... 41
Conversion Recording................................................................................... 42
Hi-Fi Audio System........................................................................................ 43
Audio Dubbing a Pre-recorded Cassette....................................................... 44
Recording an FM Simulcast Program............................................................ 45
◆ OTHER FUNCTIONS AND USEFUL RECOMMENDATIONS
■
■
■
Locking Your VCR......................................................................................... 46
Resetting Your VCR ...................................................................................... 46
Technical Specifications................................................................................ 47
◆ SOLVING PROBLEMS
■
Troubleshooting Guide .................................................................................. 48
◆ GLOSSARY
■
Glossary of Terms ......................................................................................... 49
◆ WORLD BROADCAST SYSTEMS ................................................................................. 50
◆ INTERNATIONAL SERVICE NETWORK ......................................................................... 51
Symbols
1
1
➢
☛
Press/push
Hold down
Important
Note
= Step number
1
3
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 4
Safety Instructions
GB
The following illustrations represent the precautions to be taken when using this video cassette
recorder.
The lightning flash with arrowhead in the triangle is a warning sign alerting you to
dangerous voltage inside the product.
DO NOT OPEN THE VCR.
10%
75%
40¡C
H
H
5¡C
Do NOT expose the VCR to
extreme temperature conditions
(below 5°C(41°F) and above
40°C(104°F) or to extreme
humidity conditions (less than
10% and more than 75%).
Do NOT expose the VCR to
direct sunlight.
Do NOT expose the VCR to
any liquids.
Do NOT place any objects on
the VCR or remote control.
During a storm and/or lightning,
unplug the VCR from the AC
outlet and antenna.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
THIS UNIT IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 5
Getting Started
GB
Thank you for purchasing a SAMSUNG Video Cassette Recorder (VCR).
Together with your VCR, you will find the following accessories in the box.
(EUROPE...)
(AMERICA...)
COAXIAL CABLE
(AC39-42001L)
REMOTE CONTROL
(AC59-00010D)
BATTERIES “AAA”
(AC43-12002H)
OWNER’S
INSTRUCTIONS
(AC68-00407A)
COAXIAL CABLE
(AC39-42001J)
RF ADAPTORS
(M:3705-001095
F:3705-001096)
RCA CABLE(AUDIO)
(AC39-42001U)
RCA CABLE (VIDEO)
(AC39-22017Z)
Your Owner’s Instructions contain much valuable information on setting up and using your VCR.
Please take the time to read them as they will help you take full advantage of the VCR’s features.
The manual is organized as follows:
◆
◆
◆
A series of step-by-step procedures for each function available forms the main body of the
manual.
You can consult the glossary on page 49, to obtain an explanation of the main technical terms
used throughout this manual.
On pages 6 and 7, you will find illustrations of the VCR (front and rear), the display and the
remote control unit to help you find the buttons and understand the symbols displayed.
Preparing Your Video Cassette Recorder
Before being able to play and record video cassettes, you must prepare and connect your VCR.
◆
◆
◆
◆
Insert batteries in the remote control.
Connect your VCR to the television.
Set the date and time used to display information on the television screen.
Preset the stations.
All these operations are essential, so you must follow the step-by-step instructions carefully.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 6
Front View of the VCR
GB
SQPB
SELECTION
SWITCH
RCA AUDIO
L, R INPUT
JACKS
PLAY
BUTTON
VIDEO CASSETTE
COMPARTMENT
EJECT
BUTTON
TRACKING
BUTTONS
POWER
BUTTON
RECORDING
RCA VIDEO
INPUT JACK
SPEED SELECTION
BUTTON
AUDIO OUT
BUTTON
EJECT
POWER
NORMAL(VHS)
SQPB ONLY
TRACKING
SPEED AUDIO OUT
LINE
1
IN
RESET
CHANNEL
L
R
VIDEO
AUDIO
INPUT
OUTPUT
NTSC
AUTO
THROUGH
PAL
NTSC
NTSC4.43
SECAM
PAL
REC
PAUSE/STILL
MESECAM
PLAY
SECAM
PAL-N
PAL-M
PAL-M
REW
F.F
PAL-N
STOP
RECORD
BUTTON
REW
BUTTON
STOP
BUTTON BUTTON
F.F
SYSTEM STANDARD
INPUT SELECTION
BUTTONS
RESET
BUTTON
PAUSE/STILL
BUTTON
SYSTEM
STANDARD
OUTPUT
CHANNEL
BUTTONS
SELECTION
BUTTONS
Rear View of the VCR
RCA AUDIO
L, R INPUT
JACKS
ANTENNA IN
RF CONNECTOR
RCA AUDIO
L, R OUTPUT 1
JACKS
RCA VIDEO
INPUT JACK
RCA AUDIO L, R
OUTPUT 2 JACKS
LINE
AUDIO
2
IN
R
-
-
L
VIDEO
OUT
2
OUT
1
R
TV
AUDIO
L
EURO AV
VIDEO
VIDEO
OUTPUT 2 OUTPUT 1
JACK
JACK
VIDEO
AUDIO/VIDEO IN/OUT
SCART (EURO-21) JACK
OUT TO TV
RF CONNECTOR
6
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 7
Display Indicators
GB
1
2
4
5
6
7
8
10
+10
+5
SLP
SQPB
INDEX
Hi-Fi
OUTPUT
INPUT
AUTO
NTSC4.43
PAL-MN
MESECAM
CONVERSION
0
-10
-20
-30
-40
THROUGH
NTSC4.43
PAL-MN
STROBE
ART
L
R
MESECAM
3
9
11
1
2
3
4
Timer indicator
5
6
7
8
Conversion indicator
Output select indicator
SQPB Indicator
9
10
11
Multi-function display
Hi-Fi indicator
Audio Level meter
Recording speed indicator
Cassette in/out indicator
Input select indicator
INDEX Indicator
Infrared Remote Control
VCR
POWER
EJECT
EJECT BUTTON
VCR POWER BUTTON
PICTURE BUTTON
REC.SPEED BUTTON
INDEX
REC.SPEED CLK/COUNT
PICTURE
STROBE
ART
TIMER
AUDIO
TIMER PROGRAM BUTTON
STROBE BUTTON
INDEX BUTTON
CLK/COUNT BUTTON
2
5
8
0
1
3
6
AUDIO OUT SELECTION BUTTON
ART BUTTON
INPUT
CH
4
TUNER, SC, AV, LINE 1, LINE 2 SELECTION
BUTTON
NUMERIC BUTTONS
9
7
CH UP/DOWN BUTTONS
100
CLR/RST
STROBE, ART UP(+), DOWN(-) BUTTONS
100 BUTTON
CLR/RST BUTTON
L
PLAY BUTTON
FAST-FORWARD/FORWARD SEARCH BUTTON
STOP BUTTON
REWIND/REVERSE PICTURE SEARCH
REC
P/STILL
BUTTON
STOP
PAUSE/STILL BUTTON
RECORD BUTTON
DISPLAY
MONITOR
A.DUB
DISPLAY BUTTON
MONITOR BUTTON
AUDIO DUBBING BUTTON
INPUT
SYSTEM
OUTPUT
SYSTEM
OUTPUT SYSTEM BUTTON
MENU SELECTION UP/DOWN BUTTONS
MENU BUTTON
INPUT SYSTEM BUTTON
OK BUTTON
OK
MENU SELECTION SHIFT BUTTONS
AUTO TRACKING BUTTON
AUTO
MENU
SLOW BUTTONS
TRACKING BUTTONS
JOG/SHUTTLE RING
7
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 8
Worldwide VCR Background
GB
“Worldwide Communication through VCR”
Today, the Video Recorder is a major media and communication tool, used for both business and home
entertainment. Furthermore, the emergence of the camcorder has extended the versatility of video,
enabling home video making.
Video communication is increasingly becoming a global medium, but different TV broadcasting systems
around the world hinder the worldwide exchange of video tapes.
The Samsung SV-7000W overcomes the incompatibility of different TV broadcasting systems through
sophisticated digital technology, allowing any standard VHS tape to be played on any TV, anywhere in
the world (with free voltage).
Worldwide TV Color System
Many countries have different TV signal formats, with no exchangeability between them. This makes it
impossible to play back or record tapes with different signal formats. This worldwide common VCR
overcomes this problem by converting the signal format of any tape into the format you desire.
Comparison of TV color systems
NTSC
NTSC4.43
525
PAL-M
PAL
PAL-N
SECAM MESECAM
625
50Hz
15.625KHz
Number of
scanning lines
Field
frequency
60Hz
Line frequency
15.734KHz
Color signal
modulation
system
FM modulation
Sub carrier suppression quadrature modulation
Color signal
frequency
DB 4.25MHz
DR 4.40625MHz
3.579545
MHz
4.433619
MHz
3.575611
MHz
4.433619
MHz
3.582056
MHz
Burst signal
DR.DB alternation
Fixed phase
Inverted by 1 H
☛
➢
Classification of TV color systems by country
◆
◆
◆
◆
◆
◆
NTSC
PAL
: Korea, U.S., Canada, Japan, Taiwan, and Philippines
: United Kingdom, Germany, Western Europe, China, and Singapore
: France, Eastern Europe, and CIS
SECAM
PAL-M
PAL-N
: Brazil
: Argentina (The tape is the same as that of PAL)
NTSC4.43 : Pseudo NTSC signal which is made to use NTSC tape in the Middle East
(The tape is the same as that of NTSC3.58)
◆
MESECAM : The name of a tape which uses the SECAM signal recording method.
The output signal during playback is SECAM signal.
➢
Worldwide Broadcasting system is B/G, I, D/K, M, N, L.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 9
Multi-System VCR vs Worldwide VCR
GB
The Worldwide VCR is similar to the Multi-System VCR in that it will play back tapes recorded in any
TV Broadcasting System. However, there are a few key differences:
Multi-System VCR
NTSC
SECAM
PAL
NTSC
PAL
SECAM
With a Multi-System VCR:
The TV must correspond to the system of the tape being
played, otherwise, a Multi-System TV is also required;
Tape duplication with system conversion (eg NTSC to PAL) is
not possible.
SV-7000W Worldwide VCR
ANY TV
NTSC
PAL
SECAM
With the Worldwide VCR:
Tapes can be played on any TV monitor;
Recordings can be made in any TV Broadcasting System,
even if the tape is of a different system;
Tape duplication with system conversion is possible.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 10
System Conversion with the Worldwide VCR
GB
System conversion is the most complex digital process undertaken by the Worldwide VCR, converting
the “input” into a different “output”, eg from NTSC to PAL, or from PAL to SECAM.
POWER
EJECT
NORMAL(VHS)
SQPB ONLY
TRACKING
SPEED AUDIO OUT
LINE
1
IN
RESET
CHANNEL
L
R
VIDEO
AUDIO
INPUT
OUTPUT
NTSC
AUTO
THROUGH
PAL
NTSC
NTSC4.43
PAL
SECAM
REC
PAUSE/STILL
MESECAM
PLAY
STOP
SECAM
PAL-N
PAL-M
REW
F.F
PAL-N
PAL-M
“output”
select panel
“input”
select panel
PLAY
REW
F.F
STOP
INPUT
OUTPUT
NTSC (3.58)
NTSC 4.43
PAL
NTSC (3.58)
NTSC 4.43
PAL
PAL-M
PAL-M
PAL-N
PAL-N
SECAM
SECAM
MESECAM (TAPE ONLY)
III
I
SYSTEM CONVERSION
INPUT SELECTION
VCR digitally converts scanning
lines, frequency fields and color
signal into the desired system as
selected in step ll.
VCR automatically selects the
correct TV broadcast system of
the input signal:
II
OUTPUT SELECTION
The broadcast system of the
tape - on which the recording is
to be made - is selected on the
VCR ‘output’ panel
A. When RECORDING
Recording in the desired
TV system
The ‘input’ is the external TV
signal or the output from a
second VCR or LDP
The broadcast system of the
TV - on which playback is to
be viewed - is selected on the
VCR ‘output’ panel
B. During PLAYBACK
Playback can be viewed
on any monitor
The ‘input’ comes from the
tape loaded for playback
A. TV RECORDING
LINE IN
Input signal to be
recorded
ANY
TAPE
NTSC
PAL
PAL-M
SECAM
MESECAM
Output:
Input signal converted to the
system of the tape loaded
B. PLAYBACK
NTSC
Input
Output
ANY TV
ANY
TAPE
PAL
PAL-M
SECAM
MESECAM
10
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 11
Tape Conversion with the Worldwide VCR
GB
One of the most useful functions of the Worldwide VCR is the combination of tape duplication and
system conversion, more simply known as “Tape Conversion”. This allows the user to copy, for
example, a SECAM tape and simultaneously convert it to PAL or NTSC. This is particularly useful for
duplicating home video camcorder recordings and sending them to friends or relatives abroad.
Any VHS Tape
Any VHS Tape
NTSC
NTSC
PAL
PAL
PAL-M
PAL-M
SECAM
SECAM
MESECAM
MESECAM
2nd VCR
SV-7000W
AS A PLAYBACK VCR
AS A PLAYBACK VCR
Corresponding VCR
SAMSUNG
NTSC
NT4.43
Worldwide VCR
PAL
PAL-N
PAL-M
SECAM
2nd VCR
AS A RECORDING VCR
SV-7000W
AS A RECORDING VCR
Any VCR
SAMSUNG
Worldwide VCR
NTSC
PAL
PAL-M
PAL-N
SECAM
MESECAM
Corresponding
VHS Tape
Any VHS Tape
NTSC
NTSC
PAL
PAL
PAL-M
PAL-M
SECAM
SECAM
MESECAM
MESECAM
11
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 12
GB
Any VHS-C
Tape
Any 8mm Tape
VHS-C Tape
Adapter
8mm CAMCORDER
AS A PLAYBACK VCR
2nd VCR
AS A PLAYBACK VCR
Corresponding
Camcorder
Corresponding VCR
SV-7000W
AS A RECORDING VCR
SV-7000W
AS A RECORDING VCR
SAMSUNG Worldwide VCR
SAMSUNG
Worldwide VCR
Any VHS Tape
Any VHS Tape
NTSC
NTSC
PAL
PAL
PAL-M
PAL-M
SECAM
SECAM
MESECAM
MESECAM
12
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 13
Deciding How to Connect Your VCR
GB
You must take into account various factors when deciding how to connect up your various audio
and/or video systems.
◆
◆
Types of connectors available on your systems.
Systems connected permanently to the VCR (satellite receiver for example) or from time to
time (camcorder for example).
Your VCR is equipped with the following connectors.
Connector
Location
Type
Direction
Recommended Use
AV
Rear
SCART
In/Out
◆ Television
EURO AV
LINE
Rear
Audio/Video RCA
Out
◆ Television
◆ Other VCR
R
-
AU
OUT
2
OUT
1
R
AUDIO
L
VIDEO
LINE 1
LINE 2
Front
Audio/Video RCA
Audio/Video RCA
In
In
◆ Audio system
◆ Camcorder
◆ Other VCR
LINE1 IN
L
R
VIDEO
AUDIO
Rear
IN
◆ Audio system
◆ Camcorder
LINE
AUDIO
2
R
-
-
L
VIDEO
◆ Satellite receiver
◆ Other VCR
OUT TO TV
Rear
75 ½
coaxial
Out
In
◆ Television
TV
IN FROM ANT. Rear
75 ½
◆ Antenna
coaxial
◆ Cable television network
☛
Whenever you connect an audio or video system to your VCR, ensure that all units are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 14
Connecting Your VCR to the TV
GB
To receive television programs from an over-the-air or cable
television network, a signal must be received from one of the
following sources.
◆
◆
◆
An outdoor antenna.
An indoor antenna.
VIDEO
A cable television system.
2
☛
Make sure that both the television and the VCR are
switched off before connecting the cables.
1
2
Remove the 75½ coaxial cable from the television.
Connect this cable to the 75½ coaxial socket marked
rear of your VCR.
on the
VIDEO
TV
TV
3
4
Plug the coaxial cable supplied into the
socket on your VCR.
V
Plug the other end of the coaxial cable into the connector
previously used for the antenna on the television.
3
5
Connect one end of the RCA cable supplied to the output jacks
(OUT1 or OUT2) on the rear of the VCR.
➢
Respect the color coding of the Audio and Video In/Out
cable.
LINE
AUDIO
2
IN
R
-
-
L
VIDEO
OUT 2
OUT 1
R
TV
AUDIO
L
6
7
Connect one end of the SCART cable to the EURO AV socket on
the rear of the VCR.
EURO AV
VIDEO
Plug the other end (of the RCA cable or SCART cable) into the
appropriate connector on the television.
5
◆ Regardless of the type of connection chosen, you must
always connect the coaxial cable supplied. Otherwise, no
picture will be visible on the screen when the VCR is
switched off.
LINE
AUDIO
2
IN
R
-
-
L
VIDEO
OUT 2
OUT 1
R
TV
AUDIO
L
EURO AV
DEO
* NOTICE:
Use the supplied RF adaptors as needed when making RF
6
connections.
[NTSC/PAL-M Region]
TV
14
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 15
Inserting the Batteries in the Remote Control
GB
You must insert or replace the batteries in the remote control when
you:
◆
◆
purchase the video cassette recorder ; or
find that the remote control is no longer working
correctly.
1
1
2
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
Insert two AAA or equivalent batteries (supplied), taking care to
respect the polarities.
◆
+ on the battery with + on the remote control.
– on the battery with – on the remote control.
◆
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
Plug and Initial Setting
The VCR automatically displays the initial setting MENU when the
VCR is plugged into the AC outlet for first time.
LANGUAGE SET
**
**
¨
ENGLISH
DEUTSCH
FRAN‚AIS
ITALIANO
ESPANOL
JAPANESE
1
2
3
4
Plug the VCR into the AC outlet.
Result:
The LANGUAGE SETis displayed.
Press the
Result:
,
and OK button to select your favorite language.
¹
MEMORY:(OK)
The COUNTRY SETis displayed.
Press the
Result:
,
button to select your country region.
,
The country list is displayed.
COUNTRY SET
**
**
Press the
,
and OK button to select your country.
,
EUROPE
AMERICA
ASIA/OCEANIA
MIDDLE EAST/AFRICA
¨
➢
If your country does not appear in the country list, then
select OTHERS.
¹
¨
AMERICA
**
**
¨
U.S.A.
MEXICO
CANADA
BRAZIL
ARGENTINA CHILE
COLOMBIA VENEZUELA
PANAMA
PERU
OTHERS:M
¹
¨
MEMORY:(OK)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 16
USER SET1 Setting
GB
The user set is initially set at the factory. If you want to make any
changes to the USER SET, please follow the instructions below.
M E N U
**
**
1
2
Press MENU on the remote control.
Result:
The programming menu is displayed.
TIMER PROGRAMMING
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
¨
Press the
Result:
,
button to select user set.
,
The USER SET1is displayed.
to select the USER SET1 item.
Check below to change the item.
3
4
Press
,
,
¹
¨
END:(MENU)
* USER SET1
ITEM
USAGE
COMMENT
USER SET1
**
**
TAPE
SELECT
tape length select
Select the recording tape type for
remain time.
¨
TAPE SELECT
:E180/
T120
CLOCK TYPE
PLAY SYSTEM
OSD
:12H
:AUTO
:ON
CLOCK
TYPE
12H/24H mode
Select your favorite clock type.
USER SET2
PLAY
SYSTEM
play tape system
selection
The VCR automatically selects the
play system. If an auto detection
error occurs, then select the play
system manually.
¹
¨
END:(MENU)
OSD
OSD display on/off
Initial setting is on.
USER SET2 USER SET2 select Select to go to USER SET2 page.
USER SET2 Setting
M E N U
**
**
1
2
Press MENU on the remote control.
TIMER PROGRAMMING
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
Result:
The programming menu is displayed.
¨
Press the
Result:
,
button to select user set.
,
The USER SET1is displayed.
3
4
5
Press
Press
,
,
to select the USER SET2.
,
,
¹
¨
END:(MENU)
to select the USER SET2menu item.
Check below to change the item.
USER SET1
**
**
* USER SET2
TAPE SELECT
:E180/
T120
CLOCK TYPE
PLAY SYSTEM
OSD
:12H
:AUTO
:ON
ITEM
SAP
USAGE
SAP on/off
COMMENT
Initial mode is SAP OFF.
¨
USER SET2
COLOR
COLOR or B/W
select
Initial mode is on. Color off mode is
B/W. If color distortion occurs in
the play or conversion mode, then
select color off mode.
¹
¨
END:(MENU)
USER SET2
**
**
BLUE
SCREEN
BLUE SCREEN
on/off
Initial is blue screen on. If any
problem occurs with the blue
screen, then select blue screen off.
¨
SAP
COLOR
:OFF
:ON
:ON
BLUE SCREEN
USER SET1
USER SET1 USER SET1 select Select to go to USER SET1 page.
¹
¨
END:(MENU)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 17
Setting the Date and Time
GB
Your VCR contains a 12H/24H clock and calendar used to:
AUTO
MENU
1
◆
preset your VCR to record a program automatically.
You must set the date and time when:
◆
◆
you purchase the video cassette recorder.
the power supply remains off for more than 6 hours.
M E N U
**
**
☛
◆
Do not forget to reset the time when you change
clocks from standard to daylight savings time and vice
versa.
TIMER PROGRAMMING
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
¨
1
2
3
4
5
Press MENU on the remote control.
Result:
The programming menu is displayed.
¹
¨
END:(MENU)
Press the
CLOCKSEToption.
or buttons, until the cursor is placed in front of the
CLOCK SET
**
**
Press the button to select this option.
Result: The CLOCKSETmenu is displayed.
12:00PM 1/JAN/1999
FRI
Press or to select the hour, minutes, day, month and year.
Result:
The option selected flashes.
è
¹
END:(MENU)
Press the
Result:
or
buttons to increase or decrease the value.
The day of the week is displayed automatically.
INPUT
SYSTEM
OUTPUT
SYSTEM
➢
You can hold the
quickly through the values.
or
buttons down to scroll more
2
3
6
On completion, press MENU twice to exit the menu.
OK
2
AUTO
MENU
To turn On-Screen Information on/off
Your VCR displays most information both on the VCR and television.
You can choose to turn this information on/off the television screen
(except for the Index, Timer Programming function, Picture, which
cannot be turned off).
M E N U
**
**
TIMER PROGRAMMING
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
¨
1
2
3
4
5
Press MENU on the remote control.
Result:
The programming menu is displayed.
Press the corresponding
or
button, until the cursor is placed
in front of the USER SEToption.
¹
¨
END:(MENU)
Press the button to select this option.
Result: The USER SET1menu is displayed.
USER SET1
**
**
Press the corresponding
or
button, until the cursor is placed
in front of the OSDoption.
TAPE SELECT
:E180/
T120
To:
Press or , until:
CLOCK TYPE
PLAY SYSTEM
OSD
:12H
:AUTO
:ON
display on-screen information
turn on-screen information off
ON is displayed.
¨
USER SET2
OFFis displayed.
¹
¨
END:(MENU)
6
After completion, press MENU twice to exit the menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 18
Setting the VCR RF out System
GB
The VCR RF out system and channel is used to connect the
SV-7000W to a TV with RF coaxial jacks.
The RF out system is automatically set by country selection (See
page 15).
➢
If your selection of the country set is U.S.A., the RF out
system is automatically set to U.S.A-M system.
If after making your country selection, you have picture distortion
or no sound, you must set the RF out system and channel manually.
Change the RF out system according to the table below.
TV
Broadcast
system
RF out
system
NATION
U.S.A, CANADA, KOREA,
JAPAN, BRAZIL,--
M
M
N
L
M
L
URUGUAY, ARGENTINA,--
FRANCE,--
B/G
G
GERMAN, ITALY, SPAIN,--
I
I
U.K, HONGKONG,--
CHINA, CIS, --
D/K
K
➢
If you want to know the broadcast system of your
specific country, see the World Broadcast Systems
(page 50).
INSTALLATION
COUNTRY
ANT./CATV:ANTENNA
AUTO SET UP
MANUAL SET UP
**
**
1
2
3
4
5
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
¨
Press the
Result:
or buttons to select installation.
The INSTALLATIONmenu is displayed.
¹
¨
END:(MENU)
Press the
Result:
or buttons to select MANUAL SET UP.
The MANUAL SET UPmenu is displayed.
Press the
system.
button until the cursor is placed in front of RF OUT
MANUAL SET UP
**
**
Press the
Result:
or buttons to change the RF OUT system.
The RF OUTsystem is changed.
GUIDE CH SET UP
CH ADD/DELETE
¨
RF OUT M/G/I/K :M
RF OUT CH 14-69:OFF
116-125
¹
¨
(END:MENU)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 19
Setting the RF OUT CHANNEL
GB
The initial setting of the RF OUT channel is off.
In order to view signals from the RF out connector on your TV, you
must set the RF OUT channel on the VCR to match the TV channel.
INSTALLATION
**
**
1
2
3
4
5
Press MENU on the remote control.
COUNTRY
Result:
The programming menu is displayed.
ANT./CATV:ANTENNA
AUTO SET UP
MANUAL SET UP
¨
Press the
Result:
or buttons to select installation.
The installation MENU is displayed.
¹
¨
END:(MENU)
Press the
Result:
or buttons to select MANUAL SET UP.
The MANUAL SET UP menu is displayed.
Press the
button until the cursor is placed in front of
RF OUT CHANNEL.
MANUAL SET UP
**
**
Press the
Result:
or buttons to change the RF OUT CHANNEL.
The RF OUT CH is changed.
GUIDE CH SET UP
CH ADD/DELETE
RF OUT M/G/I/K :M
¨
RF OUT CH 14-69:OFF
116-125
➢
Your VCR RF out channel may need to be changed if
there is no picture or the picture suffers from interference.
¹
¨
END:(MENU)
For better picture and sound quality, connect your VCR to
the TV using the RCA cable (if the appropriate RCA input
is available on your TV).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 20
Presetting the Stations Automatically
GB
Your VCR contains a built-in tuner used to receive television
broadcasts. It can also receive cable television broadcasts.
You must preset the stations received through the tuner. This can
be done:
OK
◆
◆
automatically ; or
manually (see page 21).
AUTO
MENU
1
1
Press the MENU button on the remote control.
Result:
The programming menu is displayed and the cursor is
automatically placed in front of the AUTOSET UPoption.
2
3
Press the
button to select AUTO SET UP.
INSTALLATION
COUNTRY
ANT./CATV:ANTENNA
AUTO SET UP
MANUAL SET UP
**
**
Press OK to start the Auto scanning.
Result:
The AUTOindication flashes on the VCR display.
¨
➢
The number of channels automatically stored by the
VCR depends on the number of channels that have
been found (reception conditions, etc).
¹
¨
END:(MENU)
4
To exit AUTO TUNING, press the MENU button.
➢
Once the Auto scanning procedure has finished, some channels
may have been stored more than once. Select the channels with
the best reception and delete the ones no longer required.
(see page 21.)
AMERICA
U.S.A.
PRESS (OK) TO CONTINUE
(MENU) TO EXIT
AUTO SET UP
PLEASE WAIT
CH 2
END:(MENU)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 21
Presetting the Stations Manually
GB
Your VCR contains a built-in tuner used to receive television
broadcasts. It can also receive cable television broadcasts.
You must preset the stations received through the tuner. This can
be done:
M E N U
**
**
TIMER PROGRAMMING
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
◆
◆
automatically (see page 20) ; or
manually.
¨
1
2
3
4
5
6
Press the MENU button on the remote control.
Result: The programming menu is displayed.
¹
¨
END:(MENU)
Press the corresponding
or
buttons, until the cursor is placed
in front of the INSTALLATIONoption.
INSTALLATION
**
**
Press the button to select this option.
COUNTRY
Result:
The INSTALLATIONmenu is displayed.
ANT./CATV:ANTENNA
AUTO SET UP
MANUAL SET UP
¨
Press the corresponding
or
buttons, until the cursor is placed
in front of the MANUAL SET UPoption.
¹
¨
END:(MENU)
Press the corresponding
or
buttons, until the cursor is placed
in front of the CH ADD/DELETEoption.
Press the
or
button to select channel that you want to
memorize or delete.
MANUAL SET UP
**
**
If you:
GUIDE CH SET UP
CH ADD/DELETE
¨
RF OUT M/G/I/K :M
RF OUT CH 14-69:60
116-125
wish to store the
displayed channel
◆ press OK buttons to memorize current
channel.
wish to delete the
channel displayed
◆ press CLR/RST button to delete current
channel.
¹
¨
END:(MENU)
7
8
Press OK button to memorize.
Result:
The selected channel is memorized.
CH ADD/DELETE
AMERICA
U.S.A.
**
**
Press CLR/RST button to delete.
Result:
The selected channel is deleted.
¨
CH
MFT
:
:
3(ADDED)
-
¹
è
DELETE:CLR/RST
END:(MENU)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 22
Selecting the Cassette Type
GB
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
2
3
4
Press MENU on the remote control.
Result:
The programming menu is displayed.
USER SET1
**
**
¨
TAPE SELECT
:E180/
Press the
or button, until the cursor is placed in front of the
T120
USER SEToption.
CLOCK TYPE
PLAY SYSTEM
OSD
:12H
:AUTO
:ON
Press the button to select this option.
USER SET2
Result:
The cursor is set to the TAPESELECToption.
or button as many times as required, until the
¹
¨
END:(MENU)
Press the
correct cassette length is displayed.
E180/T120
E 300
E240/T160
E260/T180
5
Press MENU twice to exit the menu.
Selecting the Recording Speed
You can record a cassette at two different speeds:
Type
Recording Time
PAL/SECAM/MESECAM
NTSC/PAL-M
PAL/ SECAM
NTSC
E-180/T120
E-240/T160
E-260/T180
E-300
180 mins
240 mins
260 mins
300 mins
120 mins
160 mins
180 mins
◆
◆
SP (Standard Play)
LP (Long Play)
◆
◆
SP (Standard Play)
SLP (Super Long Play)
In Long Play or Super Long Play modes:
◆
the recording is of a slightly lower quality.
To record a cassette:
Press the REC.SPEED button on the
remote control, until:
NDEX
REC.SPEED CLK/COUNT
PICTURE
TIMER
AUDIO
INPUT
in standard play mode
in long play mode
in super long play mode
SP is displayed.
LP is displayed (PAL/SECAM/MESECAM).
SLPis displayed (NTSC/PAL-M).
STROBE
ART
2
5
1
4
3
6
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
2
If you wish to protect a cassette, break off the tab using a small
screwdriver.
1
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 23
Recording a Program
GB
Before recording a program, you must have preset the corres-
ponding channel (unless you are recording via an external video
source). If you have not done so, refer to pages 20 and 21.
ART
INPUT
CH
6
5
8
0
1
2
Switch on the television.
4
To monitor the program being recorded, select the television AV
input.
9
CLR/RST
4
3
4
Insert the cassette on which the program is to be recorded.
Result:
The VCR is switched on automatically.
Select:
◆
◆
the selected channel to be recorded using the CH
buttons ;
or
the AV source using the INPUT button for a satellite tuner or
external video source.
(
or
)
5
DEX
REC.SPEED LK/COUNT
PICTURE
STROBE
ART
TIMER
AUDIO
INPUT
Result:
The channel number is displayed and the program can
be seen on the television.
2
1
3
5
6
Select the recording speed by pressing the REC.SPEED button as
many times as required (see page 22).
Press the REC button for at least one second to start recording.
Result:
The record indicator appears on the television and VCR
display. An index is recorded on the tape (see page 36).
REC
P/STILL
STOP
DISPAY
MONITOR
A.DUB
7
To stop recording, press STOP ( ) once.
7
6
➢
◆
◆
If the cassette is ejected when you start recording,
check that the safety tab is intact or the opening is
covered with adhesive tape.
If you reach the end of the tape while recording, the
cassette rewinds automatically.
Stopping a Recording Temporarily
You can stop recording temporarily (pause mode), to avoid
recording commercials or to change channels for example.
REC
P/STILL
STOP
To:
press:
DISPLAY
MONITOR
A.DUB
stop recording temporarily
start recording again
P/STILL ( ).
P/STILL ( ) or REC.
☛
If the VCR is left in pause mode for more than ten
minutes, recording will be stopped automatically to
protect the heads and the cassette.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 24
Recording a Program with Automatic Stop
GB
This function enables you to record up to nine hours of programs.
Your VCR stops automatically after the preset length of time.
1
2
3
Switch on the television.
POWER
EJECT
NORMAL(VHS)
SQPB ONLY
TRACKING
SPEED AUDIO OUT
LINE
1
IN
RESET
CHANNEL
Select the AV input on the television for use with your VCR.
Insert the cassette on which the program is to be recorded.
L
R
VIDEO
AUDIO
INPUT
OUTPUT
AUTO
NTSC
THROUGH
PAL
NTSC
NTSC4.43
PAL
SECAM
REC
PAUSE/STILL
MESECAM
PLA
S
SECAM
PAL-N
PAL-M
REW
F.F
PAL-N
PAL-M
Result:
The VCR is switched on automatically.
4
Select:
INDEX
REC.SPEED CLK/COUNT
PICTURE
STROBE
ART
TIMER
AUDIO
◆
◆
the station to be recorded using the CH
or
the AV source using the INPUT button for a satellite tuner or
external video source
(
or
)
buttons ;
2
5
8
0
5
3
6
INPUT
CH
4
Result:
The channel number is displayed and the program can
be seen on the television.
4
9
7
100
CLR/RST
4
5
6
Select the recording speed by pressing the REC.SPEED button as
many times as required (see page 22).
L
Press the REC button for at least one second to start recording.
Result:
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 36).
REC
P/ST
STOP
6
7
8
Press the REC button several times to increase the recording time
in:
DISPLAY
MONITOR
A.DUB
◆
30-minute intervals up to four hours ; or
1-hour intervals up to nine hours.
◆
Result:
The length is displayed on the VCR and television
displays. The selected program is recorded for the
length of time requested. At the end of that time, the
VCR stops recording automatically.
INPUT
OUTPU
If you wish to cancel the recording before the end, press POWER.
☛
If the end of the tape is reached while recording:
◆
◆
the recording stops ; and
the VCR automatically turns off.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 25
Using the Timer Programming Feature
GB
The Timer Programming feature enables you to preset the VCR to
record a program up to one month before it is to be broadcast. Up
to six programs can be preset.
☛
Before presetting a recording, check that the date and
time are correct. If not, refer to page 17. If the clock has
not been set, the Date/Time Setting function is activated
automatically.
X
REC.SPEED CLK/COUNT
PICTURE
STROBE
ART
TIMER
AUDIO
INPUT
1
2
3
1
Insert the cassette and press the TIMER button.
Result:
The Timer selection is displayed.
2
3
Press
to select the standard timer.
Select the required channel by pressing the
INPUT to select the SC, AV, L l or L2 input sources.
or
buttons or
¨
STANDARD TIMER
VCR PLUS
4
5
Press
to select the recording day.
Select the required day by pressing the
or
buttons.
DLY (daily program).
➢
....
¹
¨
EXIT:(TIMER)
W-SU, W-MO, , W-SA(weekly program).
6
7
8
9
Press
to select the recording start time.
Select the required hour value by pressing the
Press to select the minutes.
Select the required minute value by pressing the
to select the recording stop time.
or
buttons.
buttons.
CLOCK: 1/JAN FRI 12:32
CH DAY START
--- ------:--
--- ------:--
--- ------:--
--- ------:--
--- ------:--
--- ------:--
¹
®
®
®
®
®
®
®
STOP
¨
--:--
--:--
--:--
--:--
--:--
--:--
¨¨
¨¨
¨¨
¨¨
¨¨
¨¨
¨
or
10 Press
SET:
DELETE:(CLR/RST) (MENU)
11 Select the required recording stop time by pressing the
or
buttons, following the same procedure as when selecting the
recording start time.
INPUT
SYSTEM
OUTPUT
SYSTEM
12 Press
to select the REC SYSTEM.
13 Select the required recording system value by pressing the
OK
or
buttons. Offset value is THROUGH.
4
14 Press
to select the recording speed.
AUTO
MENU
15 Select the required recording speed value by pressing the
or
Result:
buttons. Offset value is SP.
If you select AUTO mode, the VCR compares the
timer duration with the remaining time on the cassette.
If the tape is not long enough, the speed automatically
changes from SP to LP/SLP.
VCR
POWER
INDEX
1
16 When you have finished, press the MENU button.
Result: SET is displayed, indicating that the VCR has been
programmed.
17
EC.SPEED CLK/COUNT
PICTURE
STROBE
17 Press the VCR POWER button to activate the timer.
2
3
25
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 26
VCR Plus+ Recording (AMERICA Only)
GB
VCR Plus+ selects programs to be recorded with a Plus Code
number, usually found in most of the program listings. Before using
VCR Plus+, you must set up your Guide Channel.
Set clock first (page 17).
STANDARD TIMER
VCR PLUS
¨
1
2
To enter a Plus Code, press the TIMER button.
Press the and buttons to select “VCR Plus”.
Locate the program’s Plus Code in a local TV program guide.
Press up to eight number buttons to set the Plus Code. Use
correct any mistakes.
¹
¨
EXIT:(TIMER)
to
3
Press OK to save the code. The channel number appears on the
left side. The start and end recording times, recording date and
speed also appear.
VCR PLUS
CODE --------
4
5
Press MENU to finish. Check whether there is enough time left on
the video tape to record the program.
To stop a Timer Recording, press the VCR POWER button. When
using a cable decoder box, make sure the decoder box is on.
CODE:0-9
CORRECT:Ã
END:(MENU)
VCR PLUS
CODE 12345---
CODE:0-9 CORRECT:Ã
COMPLETE:OK END:(MENU)
CLOCK: 10/JUL SAT 4:21P
CH DAY START
16 FR16 7:30P
--- ------:--
--- ------:--
--- ------:--
--- ------:--
®
®
®
®
®
®
STOP
8:00P
--:--
--:--
--:--
--:--
--:--
¨
¨¨
¨¨
¨¨
¨¨
¨¨
¨¨
--- ------:--
®
¹
SET:
¨
DELETE:(CLR/RST) (MENU)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-2_sea 7/24/01 11:16 AM Page 27
VCR Plus+ Set up (AMERICA Only)
GB
With VCR Plus+, each channel is assigned a VCR Plus+ guide
number, which can be found in most TV program guides. If your
VCR comes with VCR Plus+, you can use this system when
recording. Before using VCR Plus+, set the channel and VCR Plus+
numbers to match.
* VCR Plus+ is trademark of Gemstar Development Corporation.
Be sure to select the correct signal source (Antenna/Cable TV
depending on your hook-up) before performing Guide Channel
Setup.
INSTALLATION
**
**
COUNTRY
ANT./CATV:ANTENNA
AUTO SET UP
MANUAL SET UP
¨
¹
¨
END:(MENU)
1
Press MENU for the Main Menu. Press
and
to select
“INSTALLATION”. Press and to select “MANUAL SET UP”.
2
3
Press
to select “GUIDE CH SET UP”.
MANUAL SET UP
**
**
VCR Plus+ Guide channel numbers appear on the top row.
Receiving channels are on the bottom.
Press
¨
GUIDE CH SET UP
CH ADD/DELETE
RF OUT M/G/I/K
or
to select a VCR Plus+ Guide channel number.
:M
RF OUT CH 116-125:60
4
5
Press
or
for the correct receiving channel number.
For example : If receiving channel 23 corresponds to the
VCR Plus+ Guide channel 45, press and until 45 appears in
the top row of numbers with the downward pointing arrow directly
below.
¹
¨
END:(MENU)
Press the
and
until 23 appears on the bottom row.
The channel number that changes is always the receiving channel
rather than the VCR Plus+ Guide channel.
GUIDE CH SET UP
**
**
40 41 42 43 44 45
Press
or
to select the next VCR Plus+ Guide channel
number. Enter all the receiving channel numbers and press MENU
40 41 42 43 44 45
to finish.
ENTER ACTUAL
RECEIVING CHANNEL
¹
¨
END:(MENU)
GUIDE CH SET UP
**
**
40 41 42 43 44 45
40 41 42 43 44 23
ENTER ACTUAL
RECEIVING CHANNEL
¹
¨
END:(MENU)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-3_sea 7/24/01 11:18 AM Page 28
Checking a Preset Recording
GB
You can check your preset recordings:
◆
◆
when you have finished presetting the VCR ; or
REC.SPEED CLK/COUNT
PICTURE
STROBE
ART
TIMER
AUDIO
INPUT
if you have forgotten which programs will be recorded.
1
Press the TIMER button and select STANDARD TIMER.
Result:
1
2
5
3
6
The preset programs are displayed.
2
3
4
Press the
or button to select the required program.
Press the button to select the CH.
Press the
required.
or
button to select and change any values as
CLOCK: 1/JAN WED 12:32P
CH DAY START
1 SU19 7:05P
--- ------:--
--- ------:--
--- ------:--
--- ------:--
--- ------:--
®
®
®
®
®
®
®
STOP
¨
7:25P
--:--
--:--
--:--
--:--
--:--
¨¨
¨¨
¨¨
¨¨
¨¨
¨¨
5
On completion, press MENU twice.
¹
SET:
¨
DELETE:(CLR/RST) (MENU)
Cancelling a Preset Recording
You can cancel any programs that are:
incorrect.
no longer required.
◆
CLOCK: 1/JAN WED 12:32P
◆
CH DAY START
1 SU19 7:05P
--- ------:--
--- ------:--
--- ------:--
--- ------:--
--- ------:--
®
®
®
®
®
®
®
STOP
¨
7:25P
--:--
--:--
--:--
--:--
--:--
¨¨
¨¨
¨¨
¨¨
¨¨
¨¨
1
Press the TIMER button and select STANDARD TIMER.
Result: The preset programs are displayed.
¹
SET:
¨
2
3
Select the program to be cancelled by pressing the
button.
or
DELETE:(CLR/RST) (MENU)
Press the CLR/RST button to cancel the selected program.
9
7
8
0
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
100
CLR/RST
4
On completion, press MENU twice.
L
3
REC
P/S
STOP
28
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-3_sea 7/24/01 11:18 AM Page 29
Playing a Cassette
GB
This function enables you to play back any pre-recorded cassette.
0
L
1
2
3
Switch on both the television and your VCR.
Select the television AV or AUX input.
3
REC
P/STILL
STOP
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press PLAY ( ).
4
Otherwise, the cassette is played automatically.
DISPLAY
MONITOR
A.DUB
➢
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
4
To:
press:
4
EJECT
ER
stop the playback
eject the cassette
STOP ( ).
RACKING
SPEED AUDIO OUT
EJECT ( ).
T
CHANNEL
Selecting the PLAY SYSTEM Mode
You can choose the PLAY SYSTEM if your system does not match
the SV-7000W VCR.
This function only needs to be used when there is no color or
picture during playback.
M E N U
**
**
1
Press MENU on the remote control.
TIMER PROGRAMMING
USER SET
Result:
The programming menu is displayed.
¨
INSTALLATION
LANGUAGE SET
CLOCK SET
2
3
4
5
Press the corresponding
in front of the USER SEToption.
or
buttons, until the cursor is placed
¹
¨
END:(MENU)
Press the button to select this option.
Result: The USER SET1menu is displayed.
Press the corresponding
in front of the PLAY SYSTEMoption.
or
buttons, until the cursor is placed
USER SET1
**
**
TAPE SELECT
:E180/
Press
or
buttons until you select the appropriate system is
T120
CLOCK TYPE
PLAY SYSTEM
OSD
:12H
:AUTO
:ON
selected.
¨
Case1 : NTSC or PAL-M Tape Playback
AUTO NTSC PAL-M
USER SET2
➝
➝
¹
¨
END:(MENU)
Case2 : PAL, SECAM, MESECAM Tape Playback
AUTO PAL SECAM MESECAM
➝
➝
➝
6
On completion, press MENU twice to exit the menu.
☛
If you encounter a system error or the picture has no color
when in AUTO mode, select the play system manually.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-3_sea 7/24/01 11:18 AM Page 30
Receiving Stereo Broadcasts
GB
The VCR can receive and record stereo broadcasts.
It can also be set to record the secondary audio program (SAP) of
any broadcast with second language audio.
The VCR records the same audio on both the Hi-Fi linear tracks on
the tape.
STEREO
13
1
2
Press AUDIO button on the remote control to select stereo.
You can also select left, right or mono.
When the stereo sound is poor, press the AUDIO button to select
mono for sound without noise.
L, R (stereo)
L
R
MONO
➝ ➝ ➝
Receiving SAP Broadcasts
USER SET2
**
**
1
2
Press MENU on the remote control and select user set.
¨
SAP
COLOR
BLUE SCREEN
USER SET1
:OFF
:ON
:ON
Press the
Press the
and
and
buttons to select USER SET2.
3
4
5
buttons to set SAPto ON.
¹
¨
END:(MENU)
Press menu key twice to exit MENU.
To select SAP, press the AUDIO button on the remote control until
“SAP” is displayed on the screen.
“SAP” will be displayed on the TV screen when a SAP broadcast
is received.
SAP
6
6
Press the REC button at least one second for SAP recording.
❊ When main is displayed, stereo is selected.
1:23:28
MAIN
SAP
MONO
➝
➝
30
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-3_sea 7/24/01 11:18 AM Page 31
SQPB (Super VHS Quasi PlayBack)
GB
This function is for playback of Super VHS format tapes only, not
for recording.
1
2
3
Insert the Super-VHS format cassette.
Set the SQPB selection switch to SQPB.
Press the PLAY ( ) to play.
NORMAL(VHS)
SQPB ONLY
Result:
SQPB indicator illuminates.
☛
If the SQPB selection switch is set to the normal playback
position, the video output will be distorted.
Adjusting Picture Alignment Manually
The Fine Adjustment feature enables you to adjust the alignment
manually to obtain the best possible picture.
AUTO
MENU
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRACKING
is clear and stable.
(
or
)
buttons until the picture
Result:
◆
◆
◆
The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you release the button.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-3_sea 7/24/01 11:18 AM Page 32
Adjusting Picture Sharpness
GB
The Picture Sharpness feature enables you to adjust the sharpness
of the image according to your own preferences.
REC.SPEED CLK/COUNT
PICTURE
STROBE
ART
TIMER
1
2
During playback, press the PICTURE button.
Result:
The picture bar appears.
IO
1
2
5
3
6
Press the
liking.
and buttons until the picture is adjusted to your
INPUT
➢
If you do not press a button within six seconds, the picture
bar automatically disappears.
SYSTEM
SYSTEM
3
On completion, press the PICTURE button again.
OK
2
2
AUTO
MENU
Selecting the Audio Output Mode
You can select the mode in which the sound is reproduced on the
LINE and AV outputs. The following options are available.
STROBE
ART
AUDIO
2
3
6
9
Option
Description
INPUT
CH
L
Used to listen to the sound on the left Hi-Fi channel.
Used to listen to the sound on the right Hi-Fi channel.
5
8
R
MIX
Used to listen to the mixed sound of the Hi-Fi and linear
audio. (For example, you can play back Hi-Fi audio sound
while at the same time listening to narration dubbed onto
the normal audio track. See pages 43 and 44 for further
details of the Audio Dubbing feature.)
L
R
MIX
MONO
MONO
L R
Used to listen to the sound on the linear mono channel.
L R
Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-3_sea 7/24/01 11:18 AM Page 33
Rewinding and Fast-forwarding a Cassette
GB
You can:
◆
rewind or fast-forward a cassette without seeing the
picture on the television.
L
◆
search for a given sequence forwards or backwards on
the tape.
REC
P/STILL
STOP
To:
press:
DISPLAY
MONITOR
A.DUB
rewind the tape without
viewing the picture
REW ( ) when the cassette is stopped.
rewind the tape while
viewing the picture
REW ( ) when the cassette is playing
(Reverse Search function).
L
switch from reverse search
to playback again
REW ( ) while rewinding the tape with
the picture displayed.
REC
PTILL
STOP
fast-forward the tape without
viewing the picture
F.F ( ) when the cassette is stopped.
DISPLAY
MONITOR
A.DUB
fast-forward the tape while
viewing the picture
F.F ( ) when the cassette is playing
(Forward Search function).
switch from forward search
to playback again
F.F ( ) while fast-forwarding the tape
with the picture displayed.
➢
The cassette is rewound automatically when the end of
the tape is reached.
If you press POWER while a cassette is being rewound,
the VCR switches off automatically when the beginning of
the cassette is reached.
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
➢
No sound is heard when playing back a cassette in slow
motion.
MENU
1
2
Press:
◆
◆
◆
PLAY ( ) to start playing the cassette ;
SLOW ( or ) to start slow mode play ;
SLOW ( or ) as many times as required to decrease or
increase the speed respectively ; and
1
1
◆
PLAY ( ) to return to normal speed.
When playing back in slow motion, picture interference may occur.
Press the TRACKING or buttons to minimize this effect.
(
)
AUTO
MENU
☛
If the slow motion function is used for more than five
minutes, the VCR will automatically play to protect the:
2
◆ cassette ; and
◆ video heads.
2
33
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-3_sea 7/24/01 11:18 AM Page 34
Playing a Sequence Frame by Frame
GB
You can:
0
◆
◆
stop the cassette at a given frame (image) ; and
advance one frame at a time.
L
➢
No sound is heard when playing back frame by frame.
2, 3
REC
P/STIL
STOP
1
1
2
3
4
Press the PLAY ( ) button to start playing the cassette.
Press the P/Still button ( ) to stop the tape at a given frame.
Press the P/Still button ( ) again to advance forward frame by frame.
DISPLAY
MONITOR
A.DUB
Instead of Step
3
you can also turn the JOG to the left or right to
advance frame by frame backward or forward.
5
To return to normal playback, press the PLAY ( ) button.
☛
If the Frame-by-Frame function is used for more than five
minutes (except for JOG function), the VCR will auto-
matically play to protect the cassette and video heads.
4
Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyze an athlete’s technique, movement
by movement.
The Shuttle function is available on the remote control.
AUTO
MENU
2
➢
No sound is heard when playing a sequence at variable
speeds.
1
2
Press the PLAY ( ) button to start playing the cassette.
Turn the SHUTTLE RING to the left or right to vary the playback
speed.
3
Each time you turn the shuttle ring, the speed will change as
shown in the following illustration.
(SP on All Systems)
REVERSE REVERSE
REVERSE REVERSE REVERSE REVERSE
X9 X3 PLAY
SLOW
(1/5)
SLOW
(1/10)
PLAY
X2
PLAY
X7
PLAY
X9
STILL
SLOW
(1/5)
SLOW
(1/10)
PLAY
X7
(LP on PAL/SECAM/MESECAM/PAL-N)
REVERSE REVERSE
REVERSE REVERSE REVERSE REVERSE
X15 X9 X5 PLAY
SLOW
(1/5)
SLOW
(1/10)
PLAY
X2
PLAY
X9
PLAY
X15
STILL
SLOW
(1/5)
SLOW
(1/10)
PLAY
(SLP on NTSC/PAL-M)
REVERSE REVERSE
REVERSE REVERSE REVERSE REVERSE
SLOW
(1/5)
SLOW
(1/10)
PLAY
X2
PLAY
X9
PLAY
X15
SLOW
(1/5)
SLOW
(1/10)
STILL
PLAY
X15
X9
X7
PLAY
When you activate Variable Speed play, there will be no
color in some modes. This is normal operation. Modes
with no color are shown below.
☛
◆
No color modes : • Variable Speed play of LP recordings
on any system.
• X2 and Still/Slow play of SLP
recordings in PAL-M mode.
If the picture is noisy or distorted during X2 play or other
variable speed play, adjust the tracking manually for a
cleaner picture.
☛
34
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-3_sea 7/24/01 11:18 AM Page 35
STROBE
GB
STROBE
ART
AUDIO
You can see still images in succession.
2
5
8
3
6
INPUT
CH
1
1
Press the STROBE button during playback.
Result:
“STROBE” is displayed on the screen.
A Discrete image is displayed on screen similar to
SLOW mode.
9
CLR/RST
2
3
Press the +/- to vary the speed of STROBE mode.
To exit the STROBE mode, press the STROBE button.
6
9
5
CH
8
0
CLR/RST
2
L
ART
STROBE
ART
AUDIO
When in the ART mode, the picture contrast is changed to
resemble artwork.
2
3
6
INPUT
CH
5
8
1
Press the ART button during PLAY or STROBE mode.
Result: The contrast of the image is changed.
1
9
2
3
Press the +/- buttons to vary the contrast of ART mode.
To exit the ART mode, press the ART button.
CLR/RST
ART
INPUT
CH
6
9
5
8
0
CLR/RST
2
L
MONITOR
You can see the original input signal during a conversion recording.
REC
P/STILL
STOP
1
2
Press the MONITOR button during conversion.
Result: Original input signal is displayed on screen.
◆
DISPLAY
MONITOR
A.DUB
Press the MONITOR button again.
Result: The converted output signal is displayed on screen.
1
◆
INPUT
SYSTEM
OUTPUT
SYSTEM
35
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-4_sea 7/24/01 11:20 AM Page 36
Searching for a Specific Sequence
GB
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
VCR
POWER
EJ
The Search function enables you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows.
INDEX
REC.SPEED CLK/COUNT
PICTURE
STROBE
T
A
Prev
Seq.
Seq. being Next
played Seq.
1
etc.
etc.
2
1
3
2
1
1
2
➢
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
INDEX: --
1
2
To search for a specific index, press INDEX.
Enter the number of the index to be found using the numeric
buttons.
➢
When entering a single-digit number, do not forget to
precede it with a zero.
Example: 02.
0
Result:
The index number is displayed.
L
3
Select the direction in which the VCR is to search:
◆
◆
REW (
F.F ( ) to search forwards.
When the index is found, cassette playback starts.
)
to search backwards ; or
REC
STILL
STOP
3
3
Result:
DISPLAY
MONITOR
A.DUB
36
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-4_sea 7/24/01 11:20 AM Page 37
Using the Tape Counter
GB
The tape counter:
◆
indicates the elapsed time in the play and record modes
(hours, minutes and seconds) ;
◆
◆
is reset when a cassette is inserted in the VCR ; and
EX
REC.SPEED CLK/COUNT
2
RE
TIMER
AUDIO
INPUT
enables you to find the beginning of a sequence easily.
STROBE
ART
☛
To enable the remaining time to be calculated correctly,
you must indicate the type of cassette being used. See
page 22.
2
3
1
2
Insert a cassette in your VCR.
Press CLK/COUNT twice.
P
Result:
The tape counter is displayed:
0:00:00.
➢
The tape counter does not necessarily start from zero at the
beginning of the tape.
3
4
Select the required operation (play, record, fast-forward, rewind).
Result:
The tape counter indicates how long the cassette has
been running.
100
CLR/RST
0
To set the tape counter to zero at the beginning of a sequence:
L
◆
◆
press DISPLAY twice to display the counter ; and
press CLR/RST when you want to set the tape counter to
zero.
REC
P/STILL
STOP
4
5
To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press REW ( or F.F ( ).
DISPLAY
MONITOR
A.DUB
)
Result:
The VCR stops automatically when the counter
reaches zero.
➢
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 17).
Press DISPLAY:
◆
once to display the current function, program
0:00:00
number, recording speed, date, time and counter ;
◆
◆
twice to display the counter only ;
three times to display the time remaining on the
cassette ; and
◆
four times to clear the display.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-4_sea 7/24/01 11:20 AM Page 38
Using the Assemble Edit Function
GB
This function enables you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
L
2
1
2
3
Insert the cassette to be edited in your VCR.
Press the PLAY button ( ) to start playback.
REC
P/STILL
STOP
DISPLAY
MONITOR
A.DUB
When you reach the position from which you wish to start the new
recording, press the P/STILL button ( ).
L
4
5
Press the P/STILL button ( ) again as often as necessary to
advance frame by frame, until the exact recording position is
located.
REC
P/STILL
STOP
While the VCR is in still mode, press the REC button at least one
second to activate the Assemble Edit function.
DISPLAY
MONITOR
A.DUB
Result:
The Record symbol ( ) flashes on the display.
3
6
Select the source from which you wish to record by pressing:
◆
◆
◆
the CH
(
or
) buttons for television channels ; or
the INPUT button for the SC, AV, LI or L2 input sources.
Perform necessary hookups and activate source. Refer to
page 39.
L
REC
P/STILL
7
8
Press the P/STILL button ( ) to start recording.
STOP
When you have finished recording, press STOP ( ).
DISPLAY
MONITOR
A.DUB
4
5
ART
INPUT
CH
6
5
8
0
6
9
CLR/RST
6
L
REC
P/STILL
STOP
DISPLAY
ONITOR
A.DUB
7
8
INPUT
SYSTEM
OUTPUT
SYSTEM
38
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-4_sea 7/24/01 11:20 AM Page 39
Connecting Other Equipment to Your VCR
GB
You can connect other audio and/or video equipment to your VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢
➢
➢
The LINE 1 input connectors on the front of the VCR are used to input
signals from equipment such as camcorders, VCRs or stereo sound
systems.
Camcorder
LINE 1 IN
VCR
L
R
AUDIO
VIDEO
Stereo sound system
FRONT OF THE VCR
The RCA output connectors (OUT1 or OUT2) on the rear of the VCR
are used to output signals to equipment such as a stereo sound
system.
LINE 2 IN
R - AUDIO - L
VIDEO
Stereo sound system
OUT
2
OUT
1
R
AUDIO
L
EURO AV
VIDEO
REAR OF THE VCR
The EURO AV connector on the rear of the VCR is used for equipment
with a SCART input/output such as a satellite tuner or VCR.
Satellite tuner
LINE 2 IN
R - AUDIO - L
VIDEO
OUT
2
OUT
1
R
AUDIO
L
EURO AV
or
VCR
VIDEO
REAR OF THE VCR
39
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-4_sea 7/24/01 11:20 AM Page 40
Recording from Another VCR or Camcorder
GB
You can copy a cassette on your Samsung VCR from another video
source such as another VCR or a camcorder.
☛
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
POWER
EJECT
NORMAL(VHS)
SQPB ONLY
TRACKING
SPEED AUDIO OUT
LINE
1
IN
RESET
CHANNEL
L
R
VIDEO
AUDIO
INPUT
OUTPUT
AUTO
NTSC
THROUGH
PAL
NTSC
NTSC4.43
PAL
SECAM
REC
PAUSE/STILL
MESECAM
SECAM
PAL-N
PAL-M
REW
F.F
PAL-N
PAL-M
1
Connect the VCR from which the cassette is to be copied to the
appropriate RCA audio and video input connectors on the front of
your Samsung VCR, as indicated on page 39.
2
STROBE
ART
AUDIO
➢
If the other video source does not supply stereo sound,
connect only the left audio input (L).
2
5
8
3
You can also use a SCART cable to connect to the EURO
AV on the rear of your VCR.
INPUT
CH
6
9
2
3
Insert a blank cassette in your VCR.
4
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
CLR/RST
4
Press the INPUT button to select the appropriate input on your
VCR:
L
◆
◆
LINE 1 or LINE 2 ; or
AV for the EURO AV.
REC
P/STILL
STOP
5
6
Start playing back the cassette to be copied.
6
DISPLAY
MONITOR
A.DUB
Press the REC button for at least one second to start recording on
your VCR.
7
When you have finished recording, press STOP ( ) on both
VCRs.
L
➢
If you wish to view the cassette being copied:
REC
P/STILL
STOP
◆
the VCR must be connected to your television
(see page 14 for further details) ; and
7
DISPLAY
MONITOR
A.DUB
◆
you must select the television AUX input.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-4_sea 7/24/01 11:20 AM Page 41
TV System Conversion
GB
You can convert the input signal into the desired TV system.
LINE 1 IN
1
2
Connect the RCA audio/video cable into the LINE 1 IN jacks on
the front of the VCR.
Press the AUTO button on the VCR to select the input signal
identification. (Initial mode is AUTO)
L
R
AUDIO
VIDEO
◆
When the Auto mode is selected, the input signal is
automatically identified.
INPUT
◆
When the input signal is not automatically identified, select the
corresponding input system manually.
NTSC
AUTO
3
4
If you wish to convert the NTSC TV system into the PAL system,
press the AUTO or NTSC input button on the VCR.
Result: The display panel shows the NTSC input signal and
the NTSC output signal.
INPUT
2
NTSC
AUTO
PAL
3
◆
If the input signal does not correspond to the input
button on the VCR, an abnormal signal is outputted.
SECAM
PAL-M
PAL-N
Press the PAL output system button on the VCR.
Result:
The display panel shows the NTSC input signal and the
PAL output signal, and the NTSC signal is converted
into the PAL signal for output.
OUTPUT
NTSC
THROUGH
4
NTSC4.43
PAL
MESECAM
SECAM
PAL-M
PAL-N
Playback Conversion
You can perform playback conversion of the signal recorded on the
tape into the appropriate format for the country.
OUTPUT
1
NTSC
THROUGH
PAL
1
If you wish to convert a PAL system tape into the NTSC system
for playback, then press the NTSC output button on the VCR.
NTSC4.43
MESECAM
PAL-M
SECAM
Result:
The display panel shows NTSC output signal.
PAL-N
2
Insert the video tape into the VCR.
◆
◆
is shown on the display panel.
A video tape without the record protect (safety) tab intact will
play back automatically.
3
3
Press the PLAY ( ) button.
Result: The TV system recorded on the tape is automatically
PLAY
STOP
REW
F.F
read, and the PAL signal is converted into the NTSC
signal for playback.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-4_sea 7/24/01 11:20 AM Page 42
Conversion Recording
GB
You can convert the signal recorded on a tape to another format on
a second tape.
LINE 1 IN
1
Connect the RCA Audio/Video cable to the input on the front of the
Samsung VCR (SV-7000W)
L
R
AUDIO
VIDEO
2
3
Insert the tape to record.
Connect the other end of the RCA Audio/Video cable to the output
connectors of another VCR (see page 39).
INPUT
4
5
If you wish to convert from a tape recorded on NTSC to a PAL
recorded tape, insert the NTSC tape into the other VCR.
AUDIO OUT (R)
AUDIO OUT (L)
VIDEO OUT
Press the INPUT button on the remote control to select the L1
input.
Result: The display panel shows L1.
6
Press the PAL output system button on the front panel to select
the PAL system.
Result:
The display panel shows PAL.
7
8
Press the PLAY button of the other VCR.
STROBE
AUDIO
Press the REC button of the Samsung VCR for at least one
second.
2
5
8
3
6
9
Result:
appears on the display panel, and recording begins.
ART
INPUT
CH
5
➢ Follow these steps to perform conversion recording to other
formats.
OUTPUT
NTSC
THROUGH
6
NTSC4.43
PAL
MESECAM
SECAM
PAL-M
PAL-N
42
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 43
Hi-Fi Audio System
GB
Hi-Fi and linear audio
To provide true Hi-Fi audio sound with video entertainment and, at the same time, compatibility with regular
VHS tapes, your VCR employs a newly-developed audio recording system.
Hi-Fi audio signals (2-channel) are recorded deep into the tape's magnetic coating and the video signal is
recorded on top of the audio signals in a shallower layer. At the same time, another audio head records linear
audio signals (monaural) onto the normal audio track. With the Audio Dubbing function, it is possible to erase
the old monaural soundtrack and record a new one.
Tape pattern recorded with your VCR
Hi-Fi audio recording and reproduction are
available only from the Hi-Fi audio track,
while the normal audio track provides
normal audio.
Normal audio track
Video track (surface layer of
the magnetic coating)
Stereo Hi-Fi audio track (deep
layer of the magnetic coating)
The Hi-Fi and normal soundtracks are
recorded simultaneously and audio dubbing
is applicable only to the normal audio track.
Control track
Recording options according to the setting of the INPUT button
Track
Video track
Normal audio track
(mono)
Hi-Fi audio track
(2-channel)
INPUT button
TUNER
TV picture
TV sound (from built-in tuner)
(CH 10)
(from built-in tuner)
SIMULCAST
(SC)
TV picture
(from built-in tuner)
Audio signal from
audio input connector (Line I)
LINE 1 (LI)
LINE 2 (L2)
Video signal from
video input connector
Audio signal from
audio input connector
EURO AV (AV)
Video signal from
audio/video connector
Audio signal from
audio/video connector
43
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 44
Audio Dubbing a Pre-recorded Cassette
GB
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
LINE 1 IN
◆
◆
◆
a CD player ;
a microphone connected to a sound system ; or
a cassette player.
L
R
AUDIO
VIDEO
INPUT
NTSC
AUTO
Note:
Audio dubbing is applicable only to the linear audio track .
SECAM
PAL
RE
PAL-M
PAL-N
STROBE
ART
AUDIO
1
2
3
Connect an RCA audio cable to the appropriate output on your
sound system (CD/cassette player for example).
2
3
6
9
INPUT
CH
Connect the other end of the RCA audio cable to the audio input
connectors (L+R) on the front of your VCR.
5
8
4
Insert the pre-recorded video cassette on which the audio track is
to be replaced.
CLR/RST
4
5
6
7
Select the LINE 1 input by pressing INPUT until LI is displayed.
Locate the point on the cassette at which you wish to start dubbing.
Press P/STILL ( ).
L
6
5
REC
P/STIL
STOP
Press A.DUB.
Result:
Your VCR is now in the Audio Dubbing Pause mode.
DISPLAY
MONITOR
A.DUB
8
On the sound system, locate the point on the CD or cassette at
which you wish to start playback.
INPUT
OUTPUT
Example: The track that you wish to record on the cassette.
9
Press the pause button on your sound system.
REC
P/STILL
STOP
10 When you are ready:
◆
◆
start playback on the sound system ; and
press REC or P/STILL ( ) on the remote control.
DISPLAY
MONITOR
A.DUB
Result:
The soundtrack is replaced on the pre-recorded video
cassette.
7
11 When you have finished recording, press STOP ( ).
11
REC
P/STILL
STOP
MONITOR
A.DUB
DISPLA10
10
INPUT
OUTPUT
44
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 45
Recording an FM Simulcast Program
GB
The FM Simulcast feature enables you to record:
◆
the picture received on the VCR’s tuner ;
and
LINE 1 IN
◆
the sound received from an external source via the
LINE 1 RCA input connectors on the front of the VCR.
L
R
AUDIO
VIDEO
INPUT
NTSC
AUTO
Example:
You wish to record a concert transmitted
simultaneously on television and radio to take
advantage of FM stereo sound.
SECAM
PAL
RE
PAL-M
PAL-N
STROBE
AUDIO
1
2
3
Connect an RCA audio cable to the appropriate output on your
sound system (radio for example).
2
3
6
9
ART
INPUT
CH
Connect the other end of the RCA audio cable to the audio input
connectors (L+R) on the front of your VCR.
5
8
3
Select the SC Simulcast mode by pressing INPUT one or more
times until SC is displayed.
CLR/RST
4
5
6
Select the television program by using the CH Up/Down buttons.
Tune the sound system to the appropriate radio station.
L
Press the REC button for at least one second when the broadcast
starts.
REC
P/STILL
STOP
Result:
The sound received on the LINE 1 input is recorded
with the pictures received on the tuner.
DISPLAY
MONITOR
A.DUB
6
7
When you have finished recording, press STOP ( ).
➢
If you wish to view the pictures being recorded:
REC
P/STILL
STOP
◆
your VCR must be connected to the television (see
page 14 for further details)
DISPLAY
MONITOR
A.DUB
7
INPUT
SYSTEM
OUTPUT
SYSTEM
45
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 46
Locking Your VCR
GB
The playback functions on your VCR can be locked to prevent the
VCR from being used by young children.
L
You can still watch television programs via the VCR but you cannot
insert or play a cassette.
REC
P/STILL
STOP
1
2
To lock the VCR, hold down the P/STILL ( ) button for
approximately five seconds.
1
DISPLAY
MONITOR
A.DUB
Result:
The lock indicator (LOCK) is displayed.
➢
If a cassette is in the VCR when you lock it, the cassette will
be ejected.
L
To unlock the VCR, hold down the P/STILL ( ) button again for
approximately five seconds.
Result:
The lock indicator (LOCK) is no longer displayed.
REC
P/STILL
STOP
2
DISPLAY
MONITOR
A.DUB
Resetting Your VCR
If you find that your VCR is not operating correctly, or no
indications appear in the display, you can reset it.
TRACKING
1
2
Press the RESET button on the front panel with a pen or pencil, to
reset the VCR.
RESET
CHAN
Result:
All preset data will be erased and will need to be
reprogrammed.
1
If the problem is not solved after you have reset the VCR, refer to
page 48 for a list of simple checks to be performed before
contacting an authorized service center.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 47
Technical Specifications
GB
Recording system
Rotary head azimuth recording, luminance signal FM
recording system.
Chrominance signal down converted phase shift recording
system (NTSC, PAL, PAL-M).
Chrominance signal down converted direct recording
system (MESECAM).
Chrominance signal 1/4 frequency countdown direct recording
system (SECAM).
Color system
NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM
B/G, D/K, I, M, N, L
Tuning system
RF out
M/G/I/K/L UHF 14-69, 116-125(M-System only)
NTSC, PAL, PAL-M, SECAM, MESECAM
Tape recording/playback
Tape speed
NTSC
PAL-M
PAL
33.35mm/sec (standard recording : SP)
11.12mm/sec (three times recording : SLP)
23.39mm/sec (standard recording : SP)
MESECAM 11.69mm/sec (double speed recording : LP)
SECAM
Tape format
VHS type video tape, S-VHS type video tape (Play back only)
Maximum 8 hours (with a T-160 or E-240 tape)
Within 100 Seconds (high speed rewinding, T-120 or E-180 tape)
1.0Vp-p (unbalanced) 75 Ω
Recording time
Rewinding time
Video input
Video output
1.0Vp-p (unbalanced) 75 Ω
Video S/N
Above 43dB (standard recording)
Resolution
Above 220 (standard recording NTSC), 240 (standard recording PAL)
-8dBm, 47 Kohm unbalanced
Audio input
Audio output
-8 ± 3 dBm, 1 Kohm unbalanced
Audio S/N
Above 39dB (Mono), 68dB (Hi-Fi)
Audio frequency characteristics
Rated voltage
20Hz-20kHz
100V~240V AC
Rated frequency
Power consumption
Operating ambient temperature
Installation conditions
Outside dimensions
Weight
50/60Hz
APP. 24 watts on recording; 8 watts off
41°F-104°F (5°C - 40°C)
Operation position : Horizontal, Relative humidity : Below 80%
Width 465mm(18.3in) x Length 310mm(12.2in) x Height 98mm(3.86in)
4.8Kg(10.6 lbs)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 48
Troubleshooting Guide
GB
Before contacting Samsung authorized service center, perform the following simple checks.
Problem
Explanation/Solution
No power.
◆ Check that the power plug is connected to a wall outlet.
◆ Have you pressed the VCR POWER button?
You cannot insert a video cassette.
◆ A video cassette can only be inserted with the window
side up and the safety tab facing you.
◆ Check that the VCR has not been safety-locked (LOCK
displayed). If so, hold P/STILL
seconds to release it.
(
)
down for at least five
The television program was not recorded.
Timer recording was unsuccessful.
◆ Check the VCR/antenna connections.
◆ Is the VCR tuner properly set?
◆ Check if the safety tab is intact on the cassette.
◆ Was the VCR POWER button pressed to activate the timer?
◆ Re-check the recording start/stop time settings.
◆ If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
◆ Check that the channel number selected with the
Timer Program code is correct.
No playback picture or the picture
is distorted.
◆ Press the TRACKING buttons
(
or
).
◆ Check to see if you are using a pre-recorded tape.
◆ Check the playback system in the USER SET Menu.
◆ Check the SQPB in the Front Panel. (See page 31)
You cannot see normal broadcasts.
Noise bar or streaks on playback.
◆ Check that the source selected using the INPUT button is
the VCR’s tuner.
.
◆ Check the TV VCR/antenna connections.
◆
Press the TRACKING buttons
(
or
)
to minimize this effect.
No operation when the:
• REW button is pressed ; or
• F.F button is pressed.
◆ Check that tape is not already fully wound.
When the P/STILL ( ) button is pressed
during playback, the still picture has severe
“noise bar” streaks.
◆ A still picture may have “noise bars”, depending on the
condition of the tape. Press the TRACKING buttons
(
or
)
to minimize this effect.
Incorrect operations or no display.
◆ Use a pencil to press the RESET button and re-initialize
the VCR. All preset data is lost.
If you are unable to solve the problem after reading the above instructions, note:
◆
◆
◆
the model and serial number on the rear of your VCR ;
the warranty information ; and
a clear description of the problem.
Then contact your nearest SAMSUNG authorized service center.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 49
Glossary of Terms
GB
To help you understand the main technical terms used in this booklet and take full advantage of the
features on your VCR, here are a few definitions.
Tuner
Element in the VCR used to decode the signals received via the antenna or cable
TV.
A tuner can only receive one broadcast at a time but you can use the tuner in your
VCR to record one program while watching a different program via the tuner in your
television. To receive a broadcast, the tuner must be set to the frequency of the
appropriate channel.
Station or Channel
Program
Frequency assigned to a given broadcasting company to enable them to transmit a
series of broadcasts or programs.
Number assigned to a given channel on the tuner in the VCR to help you select it
more easily.
Broadcast transmitted on a given channel.
Cable TV
Coaxial cable network transmitting broadcasts on a subscription basis. The cable is
connected to the same input as an antenna.
Broadcasting standard
or Color standard
Standard used to code pictures and sound. Different standards are used in different
countries. In the United Kingdom for example, the PAL I standard is used.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 50
World Broadcast Systems
GB
SYSTEM
SECAM
D/K
PAL
NTSC
B/G
D/K
N
M
I
B/G
I
L
ITEM
Country Bahamas
Barbados
Bermuda
Bolivia
Afghanistan
Albania, Algeria
Australia
China Argentina Brazil Angola
Egypt
Bulgaria
Gambia France
Korea Paraguay
Botswana
Iran
Hong Kong Iraq
South Africa Lebanon
CIS (USSR)
Congo
(North)
Uruguay
Austria, Azores
Bahrain
Czech Republic
Burkina Faso
Burundi
Cambodia
Canada
Zanzibar
Lesotho
Libya
Bangladesh
Chile
Brunei, Cameroon
Canary Islands
Cape Verde
Cyprus, Denmark
Fiji, Finland
Mauritania Djibouti
Colombia
Costa Rica
Cuba
Saudi-
Arabia
French Guiana
Gabor
Tunisia
Guadeloupe
Guinea
Dominican
Ecuador
Germany, Grana
Iceland, India
Indonesia, Israel
Italy, Jordan
Konya, Kuwait
Laos
Guinea-Bissau
Guiana
El Salvador
Greenland
Guam
Hungary
Ivory Coast
Madagascar
Martinique
Mongolia
Poland
Guatemala
Haiti
Honduras
Jamaica
Liechtenstein
Madeira
Japan
Majorca Islands
Reunion
Rumania
Slovakia
Tahiti
Korea(South) Malaysia, Malawi
Mexico
Mozambique
Micronesia
Myanmar
Nicaragua
Panama
Peru
Netherlands,
New Zealand
Togo
Nigeria, Norway
Oman
Zaire
New Caledonia
Niger
Pakistan, Palestine
Papua New Guinea
Portugal, Qatar
Sierra Leone
Philippines
Puerto Rico
Samoa
Rwanda
Senegal
(America)
Surinam
Taiwan
Singapore, Spain
Sri Lanka
Sudan, Swaziland
Sweden, Switzerland
Thailand, Turkey
Uganda, Yemen
United Arab Emirates
Trinidad&
Tobago
U.S.A
Venezuela
Virgin Islands Zambia, Zimbabwe
Vietnam
50
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 51
International Service Network
GB
● Head Office (Korea)
● Europe
Tel : 82-331-200-5570
U.K (United Kingdom)
Tel : 44-1952-292-262
● North & Latin America
France
U.S.A (United States America)
Tel : 973-691-6200/1-800-Samsung
Tel : 33-10-4938-6569
Germany
Canada
Tel : 49-6196-66-1900
Tel : 905-819-5031/1-800-Samsung
Italy
Mexico
Tel : 39-2-9214-1815
Tel : 52-5-686-0800
Portugal
Tel : 35-1-414-8112
Panama
Tel : 507-210-1133
Spain
Tel : 34-3-261-6701
Sweden
Brazil
Tel : 468-5910-96630
Tel : 55-11-541-8500
Netherlands
Tel : 3170-307-2910
Argentina
Tel : 541-308-4777
Hungary
Tel : 36-1-188-7925
Colombia
Tel : 57-1-633-4410
CIS (Russia)
Tel : 1-502-224-5210 (Moscow)
Tel : 380-44-227-8330 (Ukraine)
Chile
Tel : 56-2-232-7000
● Asia & Oceania
Peru
Singapore
Tel : 65-568-7500
Tel : 51-1-4-4011121
Japan
● Middle East & Africa
Tel : 81-3-5564-0360
Dubai
Tel : 971-4-837-700
India
Tel : 91-11-643-7391
Saudi Arabia
Tel : 966-2-651-2111
China
Tel : 86-10-6460-6504
Kuwait
Tel : 965-470-6612
Australia
South Africa
Tel : 61-2-9898-5745
Tel : 27-11-463-5678
51
Download from Www.Somanuals.com. All Manuals Search And Download.
00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 52
ELECTRONICS
SAMSUNG ELECTRONICS AMERICA, INC
105 CHALLENGER ROAD
RIDGEFIELD PARK
N.J 07660-0511, U.S.A
“FOR YOUR NEAREST SAMSUNG
AUTHORIZED SERVICE CENTER, DIAL
1-800-SAMSUNG”
Download from Www.Somanuals.com. All Manuals Search And Download.
|