DVD-VCR
DVD-V70
DVD-V80
DVD-V85
Instruction Manual
STANDBY/ON
O
P
E
N
/
C
L
O
S
E
STANDBY/ON
PROG
DVD
VCR
LINE2
OK
PAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents (cont.)
Safety Instructions
The following illustrations represent precautions.
◆ SOLVING PROBLEMS
◆
◆
◆
Technical Specifications ....................................................................................................... 68
Problems and Solutions (VCR)............................................................................................. 69
Troubleshooting Guide (DVD) .............................................................................................. 70
GB
GB
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
10%
75%
40°C
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corpration and other rights owners. Use of this copyright protection
technology must by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
H
H
5°C
Do NOT expose the DVD-VCR
to extreme temperature condi-
tions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Symbols
◆
◆
1
1
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or light-
ning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
Press/push
Hold down
Important
Note
1
= Step number
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Type and Characteristics
Front View of the DVD-VCR
( DVD-V70 )
This DVD player is capable of playing the following types of discs with the corresponding logos :
VCR SELECT BUTTON
EJECT BUTTON
OPEN/CLOSE
BUTTON
STANDBY/ON
BUTTON
DVD DECK
VIDEO CASSETTE
COMPARTMENT
REW /SKIP BACK
RECORD
BUTTON
BUTTON
DVD SELECT BUTTON
Max.
Playing
Time
Disc Types
(Logos)
Recording
Types
Disc Size
Characteristics
GB
GB
Single-sided
240 min.
Double-sided
480 min.
DVD
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
12 Cm
STANDBY/ON
PROG
DVD
VCR
LINE2
Audio
+
Video
Single-sided
80 min.
Double-sided
160 min.
8 Cm
12 Cm
8 Cm
F.F / SKIP NEXT
BUTTON
EZ VIEW BUTTON
PROGRAMME
SELECTION BUTTON
STOP BUTTON PLAY/STILL
BUTTON
LINE2 VIDEO
INPUT JACK
LINE2 AUDIO L, R
INPUT JACK
VIDEO-CD
AUDIO-CD
74 min.
20 min.
74 min.
20 min.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
Audio
+
Video
( DVD-V80 )
VCR SELECT BUTTON
OPEN/CLOSE
BUTTON
STANDBY/ON
BUTTON
DVD DECK
VIDEO CASSETTE
COMPARTMENT
REW /SKIP BACK
BUTTON
EJECT BUTTON
RECORD
BUTTON
DVD SELECT BUTTON
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
12 Cm
8 Cm
Audio
STANDBY/ON
PROG
DVD
VCR
LINE2
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
F.F / SKIP NEXT
BUTTON
PROGRAMME
SELECTION BUTTON
EZ VIEW BUTTON
LINE2 VIDEO
INPUT JACK
STOP BUTTON PLAY/STILL
BUTTON
LINE2 AUDIO L, R
INPUT JACK
Disc Markings
DIGITAL
~
STEREO
SOUND
PAL
NTSC
( DVD-V85 )
• Playback
Region
Number
• NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
•
PAL colour system
in Australia,
Newzealand, etc.
• Dolby
Digital disc
• Stereo
disc
• Digital
Audio disc
• DTS disc
VCR SELECT BUTTON
OPEN/CLOSE
BUTTON
STANDBY/ON
BUTTON
DVD DECK
VIDEO CASSETTE
COMPARTMENT
REW /SKIP BACK
BUTTON
EJECT BUTTON
RECORD
BUTTON
DVD SELECT BUTTON
Playback Region Number
STANDBY/ON
PROG
DVD
VCR
LINE2
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
F.F / SKIP NEXT
BUTTON
PROGRAMME
SELECTION BUTTON
EZ VIEW BUTTON
STOP BUTTON PLAY/STILL
BUTTON
LINE2 VIDEO
INPUT JACK
LINE2 AUDIO L, R
INPUT JACK
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View of the DVD-VCR
Infrared Remote Control
( DVD-V70 )
( DVD-V70 )
1
2
3
4
5
6
7
STANDBY/ON
SHUTTLE << / >>
CLEAR
DVD, VCR SELECT
AUDIO
STANDBY/ON
OPEN/CLOSE
DIGITAL AUDIO OUT
SOCKET (COAXIAL)
LINE IN 1
GB
GB
1
2
18
19
RF ANTENNA INPUT
COMPONENT
VIDEO OUT
TRK
ꢀ
REWIND
SKIP BACK
STOP
8
9
SUBTITLE
10 MENU
11 UP
12 LEFT
13 DOWN
14 SPEED SP/LP
15 RECORD
16 TIMER
20
21
3
4
S-VIDEO OUT
JACK
LINE OUT TO TV
(COMPOSITE)
17 ANGLE
IPC
18 OPEN/CLOSE
19 0-9
20 TV/VCR
21 INPUT SEL.
22 F.ADV/STEP
23 PROG
24 FAST-FORWARD
SKIP NEXT
25 PLAY/STILL
26 INFO.
27 RETURN
28 RIGHT
29 OK
30 EZ VIEW
31 DISC MENU
32 MARK
RF OUT TO TV
AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
22
23
5
6
24
25
26
7
( DVD-V80 / DVD-V85)
8
9
10
27
28
29
DIGITAL AUDIO OUT
SOCKET (COAXIAL)
LINE IN 1
RF ANTENNA INPUT
11
12
COMPONENT
VIDEO OUT
OK
13
14
15
30
31
SEARCH
33 MODE
REPEAT
32
33
16
17
S-VIDEO OUT JACK
LINE OUT TO TV
(COMPOSITE)
DIGITAL AUDIO OUT
SOCKET (OPTICAL)
RF OUT TO TV
AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control
Display Indicators
( DVD-V80 / DVD-V85)
1
2
3
4
5
1
2
3
4
5
6
7
STANDBY/ON
SHUTTLE << / >>
CLEAR
STANDBY/ON
OPEN/CLOSE
GB
GB
1
2
18
DVD
TV MUTE. AUDIO
VOLUME +/–
REWIND
SKIP BACK
STOP
SUBTITLE
STEREO
7
19
20
8
9
10 MENU
11 UP
12 LEFT
13 DOWN
14 SPEED SP/LP
15 RECORD
16 TIMER
17 ANGLE
IPC
3
4
6
8
1
2
3
The DVD Deck is active
6
7
A DVD with a DTS soundtrack is loaded
The Hi-Fi track of a VHS tape is playing
(The current TV show or video is broadcast in
Stereo)
21
A DVD, CD, VCD, or SVCD is loaded
The time, counter position, time remaining or
current deck status is displayed
VHS tape is inserted
5
6
22
23
18 OPEN/CLOSE
19 0-9
4
5
8
A Timer Recording is programmed or in progress.
20 TV/VCR
21 VCR, TV SELECT
22 INPUT SEL.
F.ADV/STEP
23 PROG
TRACKING
24 FAST-FORWARD
SKIP NEXT
25 PLAY/STILL
26 INFO.
The VCR Deck is active
24
25
26
7
8
9
10
27
28
29
11
12
OK
27 RETURN
28 RIGHT
13
14
15
29 OK
30
31
30 EZ VIEW
31 DISC MENU
32 MARK
SEARCH
33 MODE
Accessories
32
33
16
17
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REPEAT
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Deciding How to Connect DVD-VCR
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ A cable television network
◆ A satellite receiver
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
GB
GB
◆
Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
Your DVD-VCR is equipped with the following connectors.
2
1
2
Remove the aerial or network input cable from the television.
Connector
Location
Type
Direction
Recommended Use
Connect this cable to the 75Ω coaxial socket marked
on the
rear of your DVD-VCR.
LINE 1
Rear
Audio/Video RCA In/Out
◆
◆
Television
Other VCR
TV
TV
3
4
5
Plug the coaxial cable supplied into the
DVD-VCR.
socket on your
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
4
3
Audio output
LINE 2
Rear
Front
Audio RCA
Out
In
◆
◆
Audio out (DVD only)
To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
LINE 2
Audio in
Video in
Audio/Video
Connecting DVD-VCR to the TV using the RCA Cable
COMPONENT Rear
output
RCA
Out
◆
COMPONENT out (DVD only)
Aerial
TV
S-VIDEO
output
Rear
S-JACK
Out
Out
◆
◆
S-Video out (DVD only)
3
2
◆
Digital AUDIO Rear
output
Optical
coaxial
(DVD-V80/ DVD-V85)
Digital Audio out (DVD only)
RF coaxial cable
ou can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on
the television. You thus:
OUT TO TV
Rear
75 Ω
Out
In
◆
Television
coaxial
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
◆
◆
Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
IN FROM ANT. Rear
75 Ω
coaxial
◆
◆
◆
Aerial
Cable television network
Satellite receiver
◆
1
2
Connect the coaxial cable as indicated in the above section.
◆
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of
the DVD-VCR.
Refer to the documentation supplied with your equipment for detailed connection instructions
3
Plug the other end into the appropriate connector on the television.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Auto Set up
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
TV
GB
GB
◆
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as
camcorders, VCRs or sound systems.
1
2
Connect the coaxial cable as indicated on page 13.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
Plug the DVD-VCR into the mains.
Result:
The Language Set menu is displayed.
3
4
Select the required language by pressing the
ꢁ
or
❷
buttons.
Camcorder
VCR
Press OK to store the language selected.
Result:
A message appears.
2
5
6
Press OK button.
Press OK to start the auto scanning.
◆
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
◆
Auto preset can be performed by pressing (STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
REAR OF THE DVD-VCR
◆
Sound system
Auto setup
00 %
Please wait...
Clock Set
Time
Date
Year
2003/ TUE
12 : 01
1/JAN
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning Your Television for the DVD-VCR
Deck Control Keys
You must tune your television for the DVD-VCR only if you are not
using a RCA cable
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
◆
To view pictures from your DVD-VCR when a RCA cable
is used, the television must be set to the audio/video
mode (AV).
GB
STANDBY/ON
OPEN/CLOSE
GB
1
2
STANDBY/ON Button
STANDBY/ON
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
STANDBY/ON
2
1
2
Switch on the television.
DVD Button
1
Press the DVD button on the remote control when you want to
1
Switch on the DVD-VCR by pressing STANDBY/ON on the front of
the DVD-VCR or STANDBY/ON on the remote control.
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3
4
Select a programme position on the television to be reserved for
use with your DVD-VCR.
3
4
VCR Button
Press the VCR button on remote control when you want to control
Insert the video cassette in the DVD-VCR. Check that the
the VCR deck.
DVD-VCR starts reading the cassette; if not, press
.
button
❿
II
◆ The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
3
2
5
6
7
Start a scan on your television or set the television to UHF
channel 36 (Australia:UHF 38 CH).
INPUT SEL. BUTTON
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (PR##), Line 1 (rear AV
input), and Line 2 (front AV input).
4
4
Fine tune the television until the pictures and sound are obtained
clearly.
•
Input select is only available when the VCR deck is selected.
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 25 and Problems and Solutions on page
69).
◆
Before using the VCR operation of 21~47 pages, press
the VCR button on the remote control to select VCR
mode.
8
When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Before using the DVD operation of 48~67 pages, press
the DVD button on the remote control to select and
watch DVD.
Result:
That programme is now reserved for use with your
DVD-VCR.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic TV Tuner Operations
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
1
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
GB
GB
1
TV/VCR Button
1
Press to switch between your TV’s tuner and the VCR’s internal
1
2
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
tuner.
2
3
PROG
Button
Insert two AAA, RO3 or equivalent batteries, taking care to respect
the polarities:
Press to change to the next or previous channel.
◆
+ on the battery with + on the remote control
0-9 Buttons
Press to select channels directly.
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
4
INFO.
2
2
Press to display the channel you are watching.
◆ Also works in DVD and VCR mode.
◆
Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
3
Language
:
English
You must set the date and time when:
◆ You purchase the DVD-VCR
Install
User Set
◆ Do not forget to reset the time when you change
◆
Auto Power Off
Screen Messages
:
:
Off
On
clocks from winter to summer time and vice versa.
4
1
2
3
4
5
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
OK
Press the corresponding
option.
ꢁ
,
❷
buttons to select the Clock
Clock Set
Time
Date
Year
Press the OK or
❿
to select this option.
12 : 00
1 / JAN / 2003 WED
Result: The Clock Setmenu is displayed.
Press
Result:
➛
or
❿
to select the hour, minutes, day, month and year.
The option selected highlight.
Press the
Result:
ꢁ
or buttons to increase or decrease the value.
❷
The day of the week is displayed automatically.
or buttons down to scroll more
quickly through the values.
On completion, press RETURN to exit the menu.
◆
You can hold the
ꢁ
❷
6
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
Setting the Menu Language
Presetting the Stations Automatically
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 15).
◆
Language
:
English
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
Install
User Set
1
Open “MENU”
After pressing the MENU, press the OK or ❿ .
Auto Power Off
Screen Messages
:
:
Off
On
You must preset the stations received through the tuner. This can be
GB
GB
1
OK
done:
2
3
4
Select “Language”
◆ Plug & Auto Set up (see page 15)
◆ Automatically
◆ Manually (see page 22)
Use the
ꢁ
or
❷
buttons to highlight
“Language,” then press the OK or ❿ .
Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
You can store up to 80 stations.
Australia Model
1
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Install
Auto Setup
Press the
ꢁ
or
❷
buttons to select language you want.
Language
:
English
Manual Setup
VCR Output CH
Place the selection arrow next to your desired Language, then
press the OK button.
: CH 38
2
3
Press the corresponding
option.
ꢁ,
❷
buttons to select the Install
Install
User Set
Auto Power Off
Screen Messages
:
:
Off
On
Press the OK or
❿
to select this option.
5
On completion, press RETURN to exit the menu.
Result: The Install menu is displayed.
4
Press the corresponding
is selected.
ꢁ
or
❷
buttons, until the Auto Setup
Newzealand Model
And then press the OK or
❿ to select this option.
Result:
A message appears, indicating that any channels
Language Set
already preset on your DVD-VCR will be deleted.
Install
English
5
6
Press OK button.
Result: A message appears, indicating that any channels
already preset on your VCR will be deleted.
Auto Setup
Français
Deutsch
Español
Italiano
Manual Setup
TV System
VCR Output CH
: G
: CH 36
Press OK to start the auto scanning.
Nederlands
Result:
◆
◆
◆
◆
The Please Waitindication highlight on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second station
and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
Auto Setup
Your date will be lost
Press OK to continue
◆
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
Menu
to exit
7
If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
◆
◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the ones
no longer required (see page 23).
Auto Setup
15%
Please Wait
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Presetting the Stations Manually
Clearing a Preset Station
If you have stored a TV station:
◆
You do not need to preset the stations manually if you
have already set them automatically.
◆ That you do not require
Language
:
English
Language
:
English
◆ At the wrong programme position
Install
User Set
1
2
3
4
5
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Install
User Set
GB
GB
you can cancel it.
Auto Power Off
Screen Messages
:
:
Off
On
Auto Power Off
Screen Messages
:
:
Off
On
Press the corresponding
option.
ꢀ,
❷
buttons to select the Install
1
2
3
4
5
6
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the OK or
❿
to select this option.
Result: The Installmenu is displayed.
Press the corresponding
option.
ꢀ,
❷
buttons to select the Install
Australia Model
Australia Model
Press the corresponding
Setupoption is selected.
ꢀ
or
❷
buttons, until the Manual
Install
Press the OK or
❿
to select this option.
Install
Auto Setup
Press the OK or
❿
to select a Manual Setupoption.
Result: The Installmenu is displayed.
Manual Setup
Auto Setup
Result:
The TV STATION TABLEmenu is displayed.
VCR Output CH
: CH 38
Manual Setup
VCR Output CH
Press the corresponding
Setupoption is selected.
ꢀ
or
❷
buttons, until the Manual
: CH 38
6
7
Press the
required.
ꢀ
or ❷ buttons to select a programme number as
Press the ❿ꢁbutton to preset the station.
Press the OK or
Result: The TV STATION TABLEmenu is displayed.
❿
to select a Manual Setupoption.
Result:
The MANUAL TUNINGmenu is displayed.
8
9
Press the
Result:
➛
or buttons to start scanning channel.
❿
Press the corresponding
ꢀ
or
❷
buttons, until the required preset
The frequency band is scanned and the first station
found is displayed.
TV station (PR) is selected.
Newzealand Model
Newzealand Model
Press the
ꢀ
or
❷
buttons until the NAMEis selected.
7
8
Press the CLEAR button.
Install
The station name is set automatically from the broadcast signal.
Auto Setup
Repeat the same procedure from Step
required stations have been cleared.
6
onwards until all the
Install
10 To change the programme’s name, press the ❿ꢁbutton.
Manual Setup
Result:
The first letter of the name flashes.
Auto Setup
TV System
VCR Output CH
: G
: CH 36
Manual Setup
11 To...
Then...
TV System
VCR Output CH
: G
: CH 36
9
On completion, press the RETURN button four times to exit the
menu.
Select a character
in the name
Press the
required character is displayed
ꢀ
or
❷
button until the
(letters, numbers or “-” character).
Move to the next or
previous character
Press the
respectively.
❿
or
➛
buttons
TV STATION TABLE
12 If you...
Then...
PR
1
CH
NAME
Wish to store the
station displayed
◆ Press the
is selected.
◆ Press the
picture, if necessary.
◆ Press OK to store the station
ꢀ
or ❷ꢁbuttons until the MFT
TV STATION TABLE
CH NAME
2
PR
1
3
➛
or
❿
buttons to adjust the
21
4
2
5
3
SWAPPING : OK
RETURN
4
DELETE
:
CLEAR
Do not wish to
store the station
displayed
◆ Press the
is selected.
◆ Press the
scanning the frequency band and display
the next station
ꢀ
or
❷
buttons until the CH
5
SWAPPING : OK
RETURN
➛
or
❿
buttons to go on
DELETE
:
CLEAR
MANUAL TUNING
PR
:
:
:
:
◆ Go back to the beginning of Step 14
CH
- - -
-
MFT
NAME
13 Repeat this procedure from Step
6
onwards, until all the required
- - - -
stations have been stored.
14 On completion, press the RETURN button three times to exit the
menu.
MEMORY
:
OK
RETURN
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
VCR
Changing the Preset Station Table
VCR
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
Language
:
English
Language
:
English
Install
User Set
1
2
3
4
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Install
User Set
GB
Auto Power Off
Screen Messages
:
:
Off
On
GB
Auto Power Off
Screen Messages
:
:
Off
On
1
2
3
4
5
6
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding
option.
ꢀ
,
❷
buttons to select the Install
Press the corresponding
option.
ꢀ
,
❷
buttons to select the Install
Press the OK button to select this option.
Result:
The Install menu is displayed.
Australia Model
Install
Press the OK or
❿
buttons to select this option.
Result: The Installmenu is displayed.
Auto Setup
Press the
selected.
ꢀ
or ❷ buttons, until the TV System option is
Manual Setup
Install
G
K
TV System
VCR Output CH
: G
: CH 36
Press the corresponding
Setupoption is selected.
ꢀ
or
❷
buttons, until the Manual
Auto Setup
Manual Setup
5
6
Press the
➛
or
❿
button to select G or K.
VCR Output CH
: CH 38
Press the OK or
❿
button to select this option.
On completion, press RETURN to exit the menu.
Result: The TV STATION TABLEmenu is displayed.
Press the corresponding
ꢀ
or
❷
buttons, until the required preset
TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
VCR
Setting the DVD-VCR Output Channel
Newzealand Model
7
To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
Install
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
Language
:
English
Auto Setup
Manual Setup
Install
User Set
TV System
VCR Output CH
: G
: CH 36
8
9
Press the
ꢀ
or
❷
buttons to select required position.
Auto Power Off
Screen Messages
:
:
Off
On
And then press OK again to swap the position.
On completion, press the RETURN button four times to exit the
menu.
1
2
3
4
5
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿
.
Australia Model
Press the corresponding
option.
ꢀ
,
❷
buttons to select the Install
TV STATION TABLE
Install
PR
1
CH
21
NAME
Auto Setup
Press the OK or
❿
to select this option.
CH:28
:
CH:38
:
- - - -
Manual Setup
VCR Output CH
Result:
The Installmenu is displayed.
: CH 38
2
3
Press the
selected.
ꢀ
or
❷
buttons, until the VCR Output CHoption is
CH:69
4
5
SWAPPING : OK
RETURN
Select the required output channel (CH21~CH69) by pressing the
OK or buttons (Australia:CH28 ~ CH69).
DELETE
:
CLEAR
❿
Newzealand Model
CH28
.. CH38
.. CH69
(Australia Model)
TV STATION TABLE
Install
PR
1
CH
NAME
Auto Setup
CH21
.. CH36
.. CH69
Manual Setup
(Newzealand Model)
2
CH:21
:
CH:36
:
CH:69
TV System
VCR Output CH
: G
: CH 36
3
21
- - - -
4
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 16).
5
SWAPPING : OK
RETURN
DELETE
:
CLEAR
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Selecting the Colour Mode
NICAM (Newzealand Model only)
Language
:
English
Before recording or playing back a cassette, you can select the
required system standard.
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 40.
Install
User Set
Language
:
English
Auto Power Off
Screen Messages
:
:
Off
On
◆
◆
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
Install
User Set
GB
GB
Auto Power Off
Screen Messages
:
:
Off
On
DVD-V80/ DVD-V85
Australia Model
1
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
3
4
5
Press the corresponding
User Setoption.
ꢀ
,
❷
buttons to select the
User Set
Auto
PAL
MESECAM
B/W
1
2
3
After pressing the MENU, press the OK or ❿ .
Colour System
:
Auto
On
Off
User Set
IPC
:
:
Result:
The Setup menu is displayed.
Press the OK or
❿
to select this option.
G-Code Extend
Colour System
NICAM
:
:
:
Auto
On
Off
On
On
Result: The User Setmenu is displayed.
Press the corresponding
ꢀ,
❷
buttons to select the
IPC
User Setoption.
G-Code Extend
:
Off
Press the corresponding
s selected.
ꢀ
or
❷
buttons, until the NICAMoption
Press the OK or
❿
to select this option.
Result: The User Setmenu is displayed.
To...
Press OK or ❿, until...
Mono mode
Offis displayed.
4
5
Press the corresponding
Systemoption is selected.
ꢀ
or
❷
buttons, until the Colour
Newzealand Model
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
User Set
Press the OK or
◆◆B/W
❿
button to select Auto ◆◆PAL◆◆MESECAM
Auto
PAL
MESECAM
B/W
Colour System
NICAM
:
Auto
On
.
:
IPC
:
:
On
Off
B/W Black and White
G-Code Extend
6
On completion, press RETURN three time to exit the menu.
NICAM mode
Onis displayed.
On: Normally set at this position.
6
On completion, press RETURN three times to exit the menu.
DVD-70
Australia Model
User Set
Colour System
IPC
:
Auto
On
:
Newzealand Model
User Set
Colour System
NICAM
:
:
:
Auto
On
IPC
On
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
◆
VCR
VCR
Intelligent Picture Control
G-CODE Extend (DVD-V80/DVD-V85 Only)
To prevent delays or over-runs the VCR has a function called G-
CODE EXTEND allowing you to extend the recording time by up to
60 minutes.
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
Language
:
English
Language
:
English
Install
User Set
Install
User Set
Auto Power Off
Screen Messages
:
:
Off
On
1
2
3
4
5
6
During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
1
2
After pressing the MENU, press the OK or ❿ .
Auto Power Off
Screen Messages
:
:
Off
On
GB
GB
Press the corresponding
option.
ꢀ,
❷
buttons to select the User Set
Press the OK or ❿ .
Result:
The Setup menu is displayed.
3
4
5
6
Press the OK or ❿ꢁbuttons to select this option.
Result: The User Setmenu is displayed.
Press the corresponding
ꢀ,
❷ꢁbuttons to select the
User Setoption.
Australia Model
Australia Model
Press the OK or ❿ꢁbuttons to select this option.
Result: The User Setmenu is displayed.
Press the corresponding or buttons, until the
ꢀ
❷
User Set
User Set
G-Code Extendoption is selected.
Colour System
IPC
:
Auto
On
Off
Press the corresponding
selected.
ꢀ
or
❷
buttons, until the IPCoption is
Colour System
:
Auto
On
Off
10
20
30
40
50
60
:
Press the OK or buttons to set the G-Code Extendtime by
❿
IPC
:
G-Code Extend
:
increments of 10 minutes.
On
Off
G-Code Extend
:
Off
Press the OK or ❿ꢁbuttons to select the IPC (intelligent picture
control) option.
To turn off, press OKor buttons repeatedly until Offshows.
❿
◆
When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
7
8
To adjust the sharpness manually, press the
❷
button to turn the
OFF
IPC mode
.
Newzealand Model
Press the
➛
or
❿
buttons until the picture is displayed according to
Newzealand Model
your preferences.
User Set
◆
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
User Set
Colour System
NICAM
:
Auto
On
:
:
Colour System
NICAM
:
Auto
On
Off
10
20
30
40
50
60
IPC
On
Off
:
:
:
9
On completion, press the RETURN button again.
On
Off
G-Code Extend
:
IPC
On
Off
G-Code Extend
VCR
Auto Power Off
VCR
Intelligent Picture Control ( Remote Control )
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
Language
:
English
1
2
During playback, press the IPC button.
Install
User Set
OK
Result:
The PICTUREmenu is displayed.
button to turn the IPC (Intelligent Picture Control)
Auto Power Off
Screen Messages
:
:
Off
On
Press the
❷
1
2
3
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
option ONand OFF
.
◆
When Intelligent Picture Control mode is ON, the sharpness
of the image is adjusted automatically.
Press the corresponding
Offoption is selected.
ꢀ
or
❷
buttons, until the Auto Power
1
3
4
To adjust the sharpness manually, select Intelligent Picture Control
mode OFF
The horizontal picture adjusting appears.
.
Press the
Off interval.
❿ꢁbuttons, until you select the time of Auto Power
OK or
◆
Language
:
English
Off
1Hour
2Hour
3Hour
Press the or buttons until the picture is displayed according to
➛
❿
Install
User Set
Off
your preferences.
Auto Power Off
Screen Messages
:
:
Off
On
1Hour
2Hour
3Hour
4
On completion, press RETURN twice to exit the menu.
◆
If you do not press a button within ten seconds, the
PICTUREmenu disappears automatically.
5
On completion, press the IPC button again.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Repeat Play
Screen Messages
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can set repeat play to repeat the tape continuously from
beginning to end.
Language
:
English
Language
:
English
You can choose to display or hide this information on the television
screen (except for the SEARCH, Programming MENU and
Install
User Set
Install
User Set
1
2
3
4
After pressing the MENU, press the corresponding
to select the VCR option.
ꢀ
,
❷
buttons
GB
GB
Timer functions, which cannot be hidden).
Auto Power Off
Screen Messages
:
:
Off
On
Auto Power Off
Screen Messages
:
:
Off
On
On
Off
1
2
3
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the OK or ❿ꢁbuttons to select this option.
Result:
The VCR Setupmenu is displayed.
Press the corresponding
Messagesoption is selected.
ꢀ
or
❷
buttons, until the Screen
Press the corresponding
Playoption is selected.
ꢀ
or
❷
buttons, until the Repeat
VCR Setup
To...
Press OK or
❿, until...
To...
Press OK or
❿, until...
Tape Select
Repeat Play
S-VHS
:
:
:
E180
Off
On
Off
Off
Display on-screen information
Hide on-screen information
Onis displayed.
Repeat play
Onis displayed.
Offis displayed.
Do not wish to repeat play
Offis displayed.
4
On completion, press RETURN twice to exit the menu.
5
On completion, press RETURN twice to exit the menu.
VCR
Selecting the Cassette Type
VCR
S-VHS Play
The DVD-VCR allows you to playback high quality S-VHS tapes.
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
Language
:
English
Language
:
English
1
2
3
4
During S-VHS play mode after pressing the MENU press the
Install
User Set
1
2
3
4
After pressing the MENU press the corresponding
to select the VCR option.
ꢀ
,
❷
buttons
Install
User Set
corresponding
ꢀ,
❷
buttons to select the VCR option.
Auto Power Off
Screen Messages
:
:
Off
On
Auto Power Off
Screen Messages
:
:
Off
On
Press the OK or
Result:
❿
button to select this option.
Press the OK or
❿
buttons to select this option.
The VCR Setupmenu is displayed.
Result: The VCR Setupmenu is displayed.
Press the corresponding
is selected.
ꢀ
or
❷
buttons, until the S-VHS option
Press the corresponding
Selectoption is selected.
ꢀ
or
❷
buttons, until the Tape
To...
Press OK or
❿, until...
VCR Setup
Press the OK or
❿
buttons as many times as required, until the
VCR Setup
E180
E240
E260
E300
correct cassette length is displayed.
Tape Select
Repeat Play
S-VHS
:
:
:
E180
Off
S-VHS play
Onis displayed.
Tape Select
Repeat Play
S-VHS
:
:
:
E180
Off
E180
E 300
E240
E260
Off
On
Off
Off
Do not wish to S-VHS play
Offis displayed.
5
Press RETURN twice to exit the menu.
5
On completion, press RETURN twice to exit the menu.
To watch S-VHS tapes, set the S-VHS mode to Onin the VCR
Setup.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Selecting the Recording Speed
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
You can record a cassette at two different speeds:
◆ SP (Standard Play)
T
ype
Recording Time (in SP)
180 mins. or 3 hours
240 mins. or 4 hours
1
2
If you wish to protect a cassette, break off the tab using a small
screwdriver.
E-180
E-240
E-260
◆ LP (Long Play)
In Long Play modes:
GB
GB
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
260 mins. or
4 hours and 20 mins.
1
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
E-300
300 mins. or 5 hours
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
In long play mode
SPis displayed.
LPis displayed.
VCR
Recording a Programme Immediately
OK
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 21 and 22.
4
1
2
Switch on the television.
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
4
3
4
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
OK
Select:
◆
◆
The station to be recorded using the PROG ( or
or
)
buttons
6
The LINE1, LINE2 source using the INPUT SEL. button for a
satellite tuner or external video source
5
Result:
The station number is displayed and the programme
can be seen on the television.
5
6
Select the recording speed by pressing the SPEED button as
many times as required (see page 32).
Hold REC ( ) down for a while to start recording.
◆
Result:
The record indicator appears on the television and
DVD-VCR display. An index is recorded on the tape
(see page 42).
7
7
To stop recording, press once.
◆
OK
◆
◆ If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆ If you reach the end of the tape while recording, the
cassette rewinds automatically.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
◆
VCR
VCR
Using the G-CODE Feature (DVD-V80/DVD-V85 Only)
Recording a Programme with Automatic Stop
OK
This function enables you to record up to nine hours (LP) of
programmes.
Before presetting your DVD-VCR:
◆ Switch on both the television and your DVD-VCR
◆ Check that the date and time are correct
Your DVD-VCR stops automatically after the requested length of
time.
GB
GB
◆ Insert the cassette on which the programme is to be
1
recorded (safety tab intact)
1
2
Switch on the television.
STANDBY/ON
Up to six programmes can be preset.
Timer Method
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
1
Press the TIMER button.
Standard
3
Result:
The TIMER METHODis displayed.
G-Code
2
3
Press the corresponding
is selected.
ꢀ
or
❷
buttons, until the G-Codeoption
3
4
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Press the ❿ꢁbutton to select G-Code
.
4
Result:
A message is displayed to allow you to enter the
G-Code code.
Result:
The DVD-VCR is switched on automatically.
◆◆
(DVD-V70)
◆
If all six programmes have been set, the message Timer
is Full is displayed. Refer to page 38 if you wish to
cancel a preset recording.
Select:
◆
◆
The station to be recorded using the PROG ( or
or
)
buttons
Timer Method
4
4
5
Press the numeric buttons to enter the code opposite the pro
gramme that you wish to record in your television magazine.
If you want to set
the timer program,
The LINE1, LINE2 source using the INPUT SEL. button for a
satellite tuner or external video source
press the
key.
◆
If you wish to correct the G-Code code that you are
entering:
Result:
The channel number is displayed and the programme
can be seen on the television.
◆
Press the
cleared
➛
button until the digit to be corrected is
5
6
Select the recording speed by pressing the SPEED button as
many times as required (see page 32).
OK
◆
Enter the correct digit
6
Press the OK button.
Result: The information concerning the programme is displayed.
Hold the REC button ( ) down for a while to start recording.
◆
G-Code
Result:
The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 42).
◆
When using the G-Code function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
Code
5
Code
Correct
:
:
0 - 9
7
8
Press the REC button ( ) several times to increase the
◆
pressing the
ꢀ
or
❷
buttons. Refer to the following page if:
recording time in:
◆
◆
The programme number or times flash
You wish to modify the programme
◆
30-minute intervals up to four hours
1-hour intervals up to nine hours
◆
Result:
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically and power off.
6
7
8
If the programme and times are correct, press the RETURN button.
Press the STANDBY/ON button to activate the timer.
Refer to page 38 if you wish to:
LENGTH 2:30
SET LENGTH :
PRESS REC
◆
If you wish to cancel the recording before the end, press
STANDBY/ON.
◆
Check that your VCR has been programmed correctly
Cancel a preset recording
◆
◆
If the end of the tape is reached while recording:
The recording stops and power off.
◆
The numbers next to each TV programme listing are
G-CODE code numbers, which allow you to programme
your videorecorder instantly with the remote control. Tap
in the G-CODE code for the programme you wish to
record.
◆
◆
This function is not available in DVD recording
STANDBY/ON
OPEN/CLOSE
7
™
G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is
manufactured under licence from Gemstar Development Corporation.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Modifying G-CODE Programming
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
Timer Method
Standard
G-Code
GB
GB
If you wish to...
Then...
◆
Before presetting a recording, check that the date and
time are correct.
Select an input source other
◆
◆
Press the
➛
or
❿
buttons, until the PRselection flashes.
than the tuner (LINE IN 1 or LINE IN 2)
Press the INPUT SEL. button one or more times to change the
input source selection.
1
Insert the cassette and press TIMER on the remote control.
Result: The TIMER PROGRAMMINGmenu is displayed.
Result:
The programme number is replaced by:
2
3
Press ❿ꢁꢁto select the input source.
•
The LINE IN 1 or LINE IN 2 source using the
INPUT SEL. button for a satellite tuner or
external video source
Select the required station by pressing the
ꢀ,
❷
buttons or
INPUT SEL. to select the LINE1, LINE2 input sources.
Press to select the recording day.
Select the required day by pressing the
Press to select the recording start time.
Select the required hour value by pressing the
Press to select the minutes.
Select the required minute value by pressing the
to select the recording stop time.
11 Select the required recording stop time by pressing the
◆
The input source must be selected before changing any
other value.
4
5
❿
ꢀ
or
❷
buttons.
Record a programme every day
◆
◆
Press the
➛
or
or
❿
buttons, until the DAYselection flashes.
buttons, until the DLY(Daily) value is
6
7
8
9
❿
(Monday to Sunday) at the same time
Press the
ꢀ
❷
displayed.
ꢀ
or
❷
buttons.
❿
Record a programme every week
◆
◆
Press the
Press the
➛
or
or
❿
buttons, until the DAYselection flashes.
buttons, until the W-(Week) value is
on the same day and at the same time
ꢀ
❷
ꢀ
or
❷
buttons.
displayed, followed by the required day.
10 Press
❿
Example: W-SA(Weekly Saturday)
ꢀ
or
❷
STANDBY/ON
OPEN/CLOSE
Extend the recording time
Select the recording speed
◆
◆
Press the
Press the
time.
➛
or
or
❿
buttons, until the STOPselection flashes.
buttons to increase or decrease the stop
buttons, following the same procedure as when selecting the
recording start time.
ꢀ
❷
15
12 Press
❿
to select the recording speed.
◆
◆
Press the
➛
or
or
❿
buttons, until the recording speed selection
buttons until the correct indication is
13 Press the
ꢀ
or
❷
buttons to select the SP (Standard Play), LP
flashes.
Press the
(Long Play), Auto(Auto Tape Speed Select) recording speeds.
ꢀ
❷
14 When you have finished, press the RETURN button.
displayed:
15 Press the STANDBY/ON button to activate the timer.
• AUTO(Auto Tape Speed Select) : see page 37
• SP(Standard Play)
• LP(Long Play)
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
◆
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Checking a Preset Recording
Playing a Cassette
This function allows you to play back any pre-recorded cassette.
You can check your preset recordings:
PR
Date
WE
Start
Stop
Speed
SP
◆ When you have finished presetting the DVD-VCR
1
19
:
00
19
:
30
1
2
Switch on both the television and your DVD-VCR.
:
:
:
:
:
:
:
:
:
:
:
:
◆ If you have forgotten which programmes will be
recorded
GB
GB
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿ll
.
2
3
Otherwise, the cassette is played automatically.
1
2
Press TIMER on the remote control.
◆
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
Result:
The timer selection is displayed.
Press the OK button to select Standard option.
Result:
The TIMER PROGRAMMINGmenu is displayed.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
3
4
Press the
ꢀ
or
❷
buttons to select the required programme.
3
To...
Then press...
Press the
➛
or
❿
buttons to select and change any values as
required. For more details, refer to the previous page.
Stop the playback
Eject the cassette
(STOP).
◆
3
5
On completion, press RETURN twice.
(EJECT).
LINE2
VCR
Cancelling a Preset Recording
VCR
Adjusting Picture Alignment Manually
You can cancel any programmes that are:
◆ Incorrect
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
PR
Date
WE
Start
Stop
Speed
SP
1
19
:
00
19
:
30
:
:
:
:
:
:
:
:
:
:
:
:
◆ No longer required
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK (
and stable.
or
) buttons until the picture is clear
1
2
Press TIMER on the remote control.
Result:
The timer selection is displayed.
Press the OK button to select Standard option.
Result:
◆
◆
◆
The tracking bar appears.
The image is adjusted.
Result:
The TIMER PROGRAMMINGmenu is displayed.
The tracking bar disappears when you release the button.
3
4
Select the programme to be cancelled by pressing the
buttons.
ꢀ
or
❷
Press the CLEAR button to cancel the selected programme.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
4
5
On completion, press RETURN twice.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Selecting the Audio Output Mode
Playing a Sequence Frame by Frame
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
You can:
◆ Stop the cassette at a given frame (image)
◆ Advance one frame at a time
GB
GB
Option
Description
◆
No sound is heard when playing back frame by frame.
L
Used to listen to the sound on the left Hi-Fi channel.
Used to listen to the sound on the right Hi-Fi channel.
1
2
Press:
R
1
◆
◆
◆
❿ll to start playing the cassette
❿ll button one more time to make still mode.
MIX
Used to listen to the mixed sound of the Hi-Fi and normal
channels.
to advance frame by frame
F.ADV/STEP (
)
To return to normal playback, press ❿ll
.
MONO
L R
Used to listen to the sound on the normal mono channel.
Used to listen to Hi-Fi stereo sound on the left and right
channels.
L
R
MIX
MONO
◆
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
◆
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
(
,
) buttons to minimize this effect.
L R
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
VCR
VCR
Playing a Cassette in Slow Motion
Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
You can play a cassette in slow motion.
◆
No sound is heard when playing back a cassette in slow
motion.
Example:
You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
1
2
Press:
◆
No sound is heard when playing a sequence at variable
speeds.
◆
❿ll to start playing the cassette
❿ll button one more time to make still mode.
❿❿ to start SLOW mode.
1
1
◆
◆
◆
1
2
Press:
❿❿
➛➛ button as many times as required to decrease or
or
increase the speed respectively
o return to the normal speed, press the ❿ll
◆
◆
◆
❿ll during playback
SHUTTLE (<<) to play the cassette backwards
SHUTTLE (>>) to play the cassette forwards
1
1
◆
T
button twice.
When playing back in slow motion, picture interference may occur.
Press the TRK or ) buttons to minimize this effect.
2
Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
(
REVERSE REVERSE REVERSE
SLOW
MOTION
X1/10
SLOW
MOTION
X1/5
PLAY
X3
PLAY
X5
PLAY
X9
PLAY
X9
PLAY
X5
PLAY
X3
RPLAY
STILL
PLAY
2PLAY
◆
When you have been using the Slow Motion function for
more than about two minutes, the DVD-VCR will
automatically play to protect the:
2
◆ Cassette
◆ Video heads
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Searching for a Specific Sequence
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
OK
Intro Scan
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
ꢀ
or
❷
GB
GB
2
3
Press the OK or ❿ꢁ.
1
Press the ➛➛
❿❿
buttons depending on the direction
or
where your desired programme is located.
Prev Seq. being Next
Seq.
played
Seq. etc.
2
etc.
4
5
When an Index mark is found the DVD-VCR will playback the tape
for 5 seconds, after which it will continue searching for the next
Index mark.
2
1
1
◆
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
If you want to watch the tape from a particular Index, simply press
INTRO SCAN:
➛
➛ꢁꢁꢁꢁ❿
❿
❿
II
.
Go To 0:00:00 Stop
Index Skip Search:
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the SEARCH button.
INDEX SEARCH :
➛➛
- 6
1
After pressing the SEARCH, press the corresponding
buttons, until the GoTo(0:00:00)option is selected.
ꢀ
or
❷
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
ꢀ
or
❷
2
Press the OK or
❿.
2
3
Press the OK or ❿ꢁ.
Press the ➛➛
❿❿
buttons twice more. This will take
or
you directly to the start of the desired programme is located.
End Search
4
5
These Index searches can be made forwards: (press ❿❿) or
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
backwards: (press ➛➛). (➛➛ -20
0
+20 ❿❿✌
Use this feature when you want to search for a blank position to record a
program on a cassette.
To cancel an Index search simply press the
❿
II
or button.
◆
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
2
2
1
After pressing the SEARCH, press the corresponding
buttons, until the EndSearchoption is selected.
ꢀ
or
❷
2
Press the OK or
❿.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Using the Tape Counter
Connecting an RCA Audio/Video Input Cable
The tape counter:
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
GB
GB
◆ Is reset when a cassette is inserted in the DVD-VCR
Examples: ◆ You wish to copy a video cassette with the help of a
DVD
VCR
LINE2
◆ Allows you to find the beginning of a sequence easily
second VCR.
◆ You wish to play back and/or copy pictures taken
with a camcorder .
◆
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
◆
◆ Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
0:00:00
1
2
Insert a cassette in your DVD-VCR.
1
2
3
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the DVD-VCR.
To set the tape counter to zero at the beginning of a sequence:
◆
Press INFO. twice to display the counter
VD
VCR
LINE2
◆
Press CLEAR when you want to set the tape counter to zero
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
When you are ready,
2
◆
◆
◆
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
counter was set to zero, press ➛➛ or ❿❿
3
3
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the front of the DVD-VCR.
◆
.
◆
Take care to respect the colour coding of the left and right
channels.
◆
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 30).
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
Press INFO.:
◆
Once to display the current function, programme
number, recording speed, date, time and counter
◆
◆
Twice to display the counter only
Three times to display the time remaining on the
cassette
◆
Four times to clear the display
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
◆
VCR
VCR
Using the TV Buttons on the Remote Control (DVD-V80/ DVD-V85)
Using the Assemble Edit Function
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
Your DVD-VCR remote control will work with Samsung televisions
and compatible brands.
STANDBY/ON
OPEN/CLOSE
1
2
3
Insert the cassette to be edited in your DVD-VCR.
To determine whether your television is compatible, follow the instructions
below.
1
GB
GB
Press the ❿ll button to start playback.
4
When you reach the position from which you wish to start the new
1
2
3
Switch your television on.
recording, press the ❿ll button.
2
Point the remote control towards the television.
2
4
Press the
(
) button again as often as
F.ADV/STEP
2
necessary to advance frame by frame, until the exact recording
position is located.
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
5
6
While the DVD-VCR is in still mode, hold the REC button (
down for a while to activate the Assemble Edit function.
)
◆
OK
Brand
Codes
Brand
Codes
Select the source from which you wish to record by pressing:
4
SAMSUNG
AKAI
GRUNDIG
LOEWE
01 to 06
09, 23
09, 17, 21
02
PHILIPS
SABA
SONY
THOMSON
TOSHIBA
02, 20, 22
13, 14, 22 to 24
15, 16
13, 14, 24
07, 16 to 19, 21
◆
◆
The PROG ( or ) buttons for television channels
The INPUT SEL. button for the LINE input sources
3
7
8
Press the ❿ll button to start recording.
4
PANASONIC
08, 23 to 27
When you have finished recording, press
.
◆
Result: If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
◆
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
5
VCR
Recoding from Another VCR or Camcorder
◆
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
5
You can then control the television using the following buttons.
◆
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
Button
Function
STANDBY/ON
STANDBY/ON
Used to switch the television and DVD-VCR on and off.
Used to switch between the TV and VCR modes.
Used to select an external source.
◆
1
Connect the DVD-VCR, from which the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 14.
TV or VCR
◆
2
6
INPUT SEL.
◆
2
3
Insert a blank cassette in your DVD-VCR.
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
VOL
+
or
–
Used to adjust the volume of the television.
Used to select the required programme.
◆
◆
PROG/TRK
or
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR: LINE IN for the RCA input.
7
(
)
5
6
Start playing back the cassette to be copied.
TV MUTE
◆
Used to mute the volume of the television.
Hold REC ( ) down for a while to start recording on your
◆
OK
DVD-VCR.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
◆
7
When you have finished recording, press
DVD-VCR.
on both VCR and
◆
◆
If you wish to view the cassette being copied:
◆
Your DVD-VCR must be connected as usual to the
television (see page 13 for further details)
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Choosing a Connection
The following show examples of connections commonly used to connect the DVD -VCR player with
a TV and other components. It is only available for DVD. The VCR out can not watch by this
connection.
GB
Connection to an Audio System
Connection to an Television
Television
Dolby Digital Decoder
Digital Audio Input Jack
COAXIAL
OPTICAL
or
DVD-VCR
◆◆
(DVD-V80/ DVD-V85)
Digital Audio out
Jack
S-Video
Jack
48
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language
in advance, they will come up automatically every time you watch a
movie.
Setup
Setup
GB
Display Setup
Setup
:
Using the Disc Menu Language
This function changes the text language only on the disc menu
screens.
1
With the unit in Stop mode, press the MENU button.
2
3
Select DVD using
ꢀ
,
❷
buttons, then OK or
❿
button
Language Setup
Disc Menu
Audio
:
:
:
English
Select Language Setup using
OK or ❿ꢁ button.
ꢀ,❷
buttons, then press the
English
Subtitle
Automatic
4
5
6
Select Disc Menu using
button.
ꢀ
,
❷
buttons, then press the OK or
❿
Use the
ꢀ,
❷
buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
Press the OK button.
- English is selected and the screen returns to DVD menu.
Disc Menu Language
Disc Menu
49
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Setting Up the Audio Options
Setting Up the Language Features
Using the Audio Language
Language Setup
1
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or ❿ꢁ button.
Disc Menu
:
:
:
English
Audio
English
2
3
ꢀ,❷
Subtitle
Automatic
GB
GB
1
2
3
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or ❿ꢁ button.
Select Language Setup using buttons, then press the OK or
button.
Setup
Setup
Select Audio Setup using
ꢀ
,
❷
buttons, then press the OK or
❿
Display Setup
Setup
ꢀ,❷
button.
:
ꢀ,❷
4
Use the
ꢀ
,
❷
buttons to select the desired item. Then press the
❿
OK or ❿ꢁ button.
4
5
Select Audio using
ꢀ
,
❷
buttons, then press the OK or
❿
button.
•
Dolby Digital Out
1. PCM:
Press the buttons to select ‘English’ .
ꢀ,❷
Converts to PCM(2CH) audio.
- Select “Original” if you want the default soundtrack language to be
the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
6
Press the OK button.
Dolby Digital Out
- English is selected and the screen returns to DVD menu.
➢
•
Be sure to select the correct Digital Output or no audio will be
MPEG-2 Digital Out
DTS
heard.
PCM Down Sampling
•
MPEG-2 Digital Out
1. PCM : Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or
7.1CH).Select Bitstream when using the Digital Audio Output.
Using the Subtitle Language
Setup
Setup
Display Setup
Setup
• DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
1
2
3
With the unit in Stop mode, press the MENU button.
:
Select DTS when connecting to a DTS Decoder.
Select DVD using
Select Language Setup using
button.
ꢀ
,
❷
buttons, then OK or
❿
button.
•
•
Dynamic Compression
ꢀ,❷
buttons, then press the OK or
1. On
2. Off
:
:
To select dynamic compression.
To select the standard range.
❿
PCM Down Sampling
4
5
Select Subtitle using
ꢀ,
❷
buttons, then press the OK or
❿
1. On : Select this when the amplifier connected to the player is not
96KHz compatible.
button.
Language Setup
Use the
ꢀ,
❷
buttons to select ‘English’.
In this case, the 96KHz signals will be down converted to
48KHZ.
Disc Menu
Audio
:
:
:
English
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you
English
Subtitle
Automatic
2. Off : Select this when the amplifier connected to the player is
96KHz compatible.
In this case, all signals will be output without any changes.
select as your initial language; in that case the disc will use its
original language setting.
➢
•
How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or button.
➛
6
Press the OK button.
- English is selected and the screen returns to DVD menu.
• Manufactured under license from Dolby Laboratories.
Subtitle Language
Automatic
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Subtitle
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Setting Up the Parental Control
Setting Up the Display Options
1
2
3
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button.
The Parental Control function works in conjunction with DVDs that
have been assigned a rating - which helps you control the types of
DVDs that your family watches.
Setup
Setup
Display Setup
Setup
ꢀ,
❷
❿
Setup
Setup
Display Setup
Setup
:
Select Display Setup using
ꢀ,
❷
buttons, then press the OK or
❿
GB
GB
There are up to 8 rating levels on a disc.
button.
:
.
.
4
Use the
OK or
ꢀ
,
❷
buttons to select the desired item. Then press the
1
2
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button.
❿
button.
ꢀ,
❷
❿
•
TV Aspect
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies,
even though you have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and right side of movie picture
will be cut off.)
3
Select Parental Setup using
❿ꢁ button.
ꢀ
,
❷
buttons, then press the OK or
Parental Setup
No
Yes
4
Use OK or ❿ꢁ to select Yes if you want to use a password.
The Enter Password screen appears.
Use Password
:
No
Display Setup
4:3 L-Box
5
Enter your password. The Re-Enter Password
screen appears to confirm the password.
Ok your password again. The Parental Control screen appears.
TV Aspect
:
Black Level
NTSC Disc Output
DVD Out
:
:
PAL 60Hz
Component
•
About the Rating Level ;
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
The Rating Level will work only when Use Password is set to
Yes. To unlock the player, use
to select Rating Level. Press OK.
- Use to select the level(e.g. Level 6) and press OK. Discs
that contain Level 7 will now not play.
ꢀ
,
❷
to select No. Use
❿
or OK
•
•
Black Level
Adjusts the brightness of the screen.(On/Off)
ꢀ,❷
NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance. If this is not
the case, you can choose to leave “ PAL 60Hz” as is.
- To cancel the rating level, use
Password.
❿
or OK to select No in Use
•
DVD Output
•
About the Change Password ;
~
Component : Sends COMPONENT signal (Y, Pb, Pr) to the
component video out JACK.
- Use
ꢀ,
❷
to select Change Password.
Press OK. The Change Password screen appears.
- OK your new password. Re-ok the new password again.
S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.
Yes
Video : Sends COMPOSITE VIDEO signal to the Scart JACK.
•
How to make the SETUP menu disappear or return to menu
➢➢
Press RETURN or
➛
button.
screen during set up;
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
A/V Receiver Connections
Special Playback Features
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the ❿ll
(Play/Still) button.
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
2
GB
GB
1
Still
Before You Begin...
Press the ❿ll (Play/Still) button on the remote control during
1
playback.
OR
•
If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
• The picture will still and the audio will mute.
• To resume playback, press the ❿ll (Play/Still) button.
• If the player is left in Still mode for 5 minutes, it will stop
automatically.
2
3
Frame Advance (Step)
While in playback mode, press the F.ADV/STEP button on the
remote control to advance one frame at a time.
1
Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
3
3
• Audio is muted during Frame Advance mode.
• Press ❿ll (Play/Still) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
➢➢
•
•
•
Optical (DVD-V80/ DVD-V85)
Coaxial
Skip Forward/Back
While a CD or DVD disc is in Play mode, press the Skip
Use whichever connection is available on your A/V Receiver.
Forward/Back (❿❿
l
/
l➛➛ ) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
•
•
Skip Forward will jump to the next chapter/track.
Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
5
Search Forward/Back
While a disc is in Play mode, press and hold the Forward/Back
(
❿❿ ➛➛ ) buttons on the remote control or front panel to visually
/
search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press ❿ll (Play/Still) button to resume normal speed.
4
5
Slow Motion
During playback, press the ❿ll (Play/Still) button to Still the image.
Then use the Search Forward (❿❿ ) to play in slow motion at
variable speeds.
•
•
Each press increases the slow motion speed playback to 1/8, 1/4
or 1/2 normal speed.
Audio is muted during slow motion playback.
Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ❿ll
(Play/Still) button.
• Press the
(Stop) button twice to completely stop playback.
➢
The next time you press ❿ll (Play/Still), the disc will start over
from the beginning.
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Adjusting the Aspect Ratio (EZ View)
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
If you are using a 4:3 TV
1
Press the EZ VIEW button.
GB
GB
•
•
•
The screen size changes when the button is pressed repeatedly.
The screen zoom mode operates differently depending on the screen setting in the initial DVD menu.
To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the
initial setup (See page 52).
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central portion of the 16:9 screen.
• Screen Fit
If you are using a 16:9 TV
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
• Zoom Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom of the screen will disappear. The picture will look
vertically stretched. (Depending on the type of disc, the black bars may not disappear completely.)
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture would look vertically stretched.
• Zoom Fit
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.
➢
• This function may behave differently depending on the type of disc.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
56
57
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Using the Display Function
Changing the Camera Angle
Using the ANGLE button
OK
When Playing a DVD/VCD/CD
When a DVD contains multiple angles of a particular scene, you
can select the Angle function.
1
GB
GB
1
During play, press the INFO. button on the remote.
2
Press the ANGLE button to see if an ANGLE
2
3
Use the
Use the
ꢀ
,
❷
buttons to select the desired item.
(
) mark is present at the upper Right hand corner of the
OK
screen.
➛
,
❿
buttons to make the desired setup.
• You may use the number buttons of the remote control to directly
access a title, chapter or to start the playback from the desired
time.
1
When an ANGLE mark is shown, press the ANGLE button, then an
ANGLE select icon will appear at the upper left hand corner of the
screen.
4
To make the screen disappear, press the INFO. button again.
2
3
Use the
➛
,
❿
buttons to select the desired screen angle.
➢
• What is a Chapter?
Each Title on a DVD is usually divided into chapters (similar to
tracks on an audio CD).
To turn off the display, press the ANGLE button again.
• What is a Title?
A DVD may contain several different titles. For example, if a
disc contains four different movies, each might be considered a
title.
DVD
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the subtitle
button.
ENG 5.1CH
To access the desired title when there is more than one in the
disc. For example, if there is more than one movie on a DVD,
each movie will be identified.
ENG
Off
TITLE
Using the SUBTITLE button
Most of DVD discs are recorded in chapters so that you can
quickly find a specific passage.
1
CHAPTER
TIME
OK
Allows playback of the film from a desired time.
You must ok the starting time as a reference.
1
2
3
Press the SUBTITLE button.
Use the
➛
,
❿
buttons to select the desired subtitle language.
buttons to determine whether or not the subtitle will
Refers to the language of the film soundtrack. In the example,
the soundtrack is played in English 5.1CH. A DVD disc can
have up to eight different soundtracks.
ENG
On
Use the
ꢀ
,❷
AUDIO
ENG 5.1CH
ENG
be displayed.
Off
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or,
if you prefer, turn them off from the screen.
• Initially, the subtitling will not appear on screen.
• The subtitle languages are represented by abbreviations.
SUBTITLE
A DVD disc can have up to 32 different subtitles.
➢
• This function depends on what languages are encoded on
the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
A surround sound effect is generated using only two front
speakers.
3D SOUND
•
How to have the same subtitle language come up
Refer to “Setting Up the
wheneveryou play a DVD;
Language Features” on page 50.
ENG
Off
*
When in VCD 2.0 mode (MENU ON mode), this function does not work.
ENG 5.1CH
ENG
Off
~
58
59
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Selecting the Audio Language
Repeat Play
OK
DVD
Repeat the current track, chapter, title, a chosen section (A-B), or all
of the disc.
You can select a desired language quickly and easily with the
AUDIO button.
GB
GB
When playing a DVD
Using the AUDIO button
1
1
2
Press the REPEAT button on the remote.
Repeat screen appears.
1
2
Press the AUDIO button.
DVD
Use the
➛
,
❿
buttons to select the desired language on a DVD.
Select Chapter, Title or A-B using the
➛
,
❿
buttons.
- The audio languages are represented by abbreviations.
Press the REPEAT button. Select A-B on screen with the
buttons.
➛
,
❿
•
Chapter Title A - B
Off
3
Use the
➛
,
❿
buttons to select Stereo,
➛
or ❿ꢁ (On VCD/CD)
VCD/ CD
Press OK at the point where you want the repeat play to start
(A). The B is automatically highlighted.
•
•
➢
• This function depends on what languages are encoded on the disc
Press OK at the point where you want the repeat play to stop
(B).
and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
To terminate the function, press the 'CLEAR' button.
•
•
•
How to have the same audio language come up whenever you play
Refer to “Setting Up the Language Features” on page 50.
A-B REPEAT does not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set.
a DVD ;
3
4
Press OK.
VCD / CD
To return to normal play, press REPEAT again, then press the
buttons to select Off and press OK.
➛
,
❿
Track Disc A - B
Off
•
It is available to press CLEAR button on the remote controller in
order to stop REPEAT play.
➢
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
60
61
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Using the Mark Function
MP3/WMA Play
This feature lets you mark sections of a DVD or VCD (MENU OFF
mode) so you can quickly find them at a later time.
When an MP3/WMA Disc is inserted into the DVD player, the first
song file of the first folder plays.
OK
•
•
•
If more than two file extensions are present, select the media of your
choice.
GB
GB
Using the Mark Function (DVD/VCD)
To change the currently playing media, press the STOP ( ) button
➢➢
twice and then press the DISC MENU button.
If no button on the remote controller is pressed for 60 seconds, the
menu will disappear and the selected item will be played.
1
1
During play, press the MARK button on the remote. The Mark
icons will be displayed.
2
3
Use the
➛
,
❿
buttons to move to the desired Mark icon.
MP3/WMA Play Function
When you reach the scene you want to mark, press the OK
button. The icon will change to a number (1, 2, or 3).
4
Press the MARK button to turn off the display.
1
2
When the first song file is playing, the music folder menu will
appear on the right side of the screen.
Up to 8 music folders can be displayed at a time. If you have more
than 8 folders on a disc, press the
on the screen.
➛
,
❿
buttons to bring them up
Recalling a Marked Scene
Use the
ꢀ,
❷
buttons to select the desired music folder, then
press OK.
Use the
begin playback of the song file.
1
2
During play, press the MARK button on the remote.
ꢀ,
❷
buttons again to select a song file. Press OK to
Use the
➛
,
❿
buttons to select a marked scene.
CLEAR
1
–
–
3
Press the PLAY/STILL (❿ll ) buttons to skip to the marked scene.
PROGRAM
RANDOM
Program/Random playback
Clearing a Mark
Press the MODE button in STOP mode to switch between the
RANDOM and PROGRAM modes.
1.
1
2
During play, press the MARK button on the remote.
Use the
delete.
➛
,
❿
buttons to select the mark number you want to
➢
•
Press the REPEAT button in PLAY mode to hear only music
continuously and press it once again to release.
3
Press the CLEAR button to delete a mark number.
Press the MARK button to turn off the display.
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
➢
• Up to three scenes may be marked at a time.
•
When in VCD 2.0 mode (MENU ON mode), this function does not work.
• Depending on the disc, the mark function may not work.
62
63
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA Play
Program Play & Random Play
CD-R MP3/WMA discs
Program Play (CD/MP3/WMA)
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
PROGRAM
RANDOM
GB
GB
1.
2.
3.
Press the MODE button.
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
Use the
➛
,
❿
buttons to select PROGRAM. Press the OK button.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and
with Apple's Mac. These two formats are the most widely used.
Use the
ꢀ,
❷ꢁ
/
➛
,
❿
buttons to select the first track to add to the
program.
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as
the file extension.
Press the OK button. The selection numbers appear in the
Program Order box.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use 8
characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
4.
Press the PLAY/STILL (
The disc will be played in programmed order.
) button.
❿
II
PROGRAM 01
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps
or more, only rarely give better sound quality.
Track
Program order
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
Random Play (CD/MP3/WMA)
Conversely, files with decompression rates below 128 Kbps will not be played properly.
CLEAR
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
1.
2.
Press the MODE button.
Use the
➛
,
❿
buttons to select RANDOM. Press the OK button.
The disc will be played in random order.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
PROGRAM
RANDOM
➢
• Depending on the disc, the Program and Random Play
functions may not work.
• Do not try recording copyright protected MP3 files.
• To resume normal play, press the CLEAR button.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are of
the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM (registered
trade mark of The SDMI Foundation). You cannot copy such files.
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will play
MP3 recordings, or as an assurance of sound quality.
• This unit can support a maximum of 99 programmed order.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
64
65
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Picture CD Playback
Picture CD Playback
•
•
Select JPEG in the menu to view a Photo CD.
To change the currently playing media, press the STOP ( ) button
➢
twice and then press the DISC MENU button.
If no button on the remote controller is pressed for 60 seconds, the
menu will disappear and the selected item will be played.
CD-R JPEG Discs
•
GB
GB
• Only files with the ".jpg" and ".JPG" extensions can be played.
1.
Open the disc tray.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
2.
Load the disc on the tray.
Load the disc with the labeled side up.
3.
Close the tray.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special
characters (. / = +).
- The tray closes and you should get a screen that looks like the
one below.
• Use the
picture you want to view and then press the OK button. (Press the
PLAY/STILL ( ) button if you want to play it in the Slide Show mode.)
ꢀ
,
❷
or
➛
,
❿
buttons on the remote controller to select the
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
Album
Photo : 1 /215
❿
II
• A maximum of 500 images can be stored on a single CD.
• To see the next 6 pictures, press the ❿❿
l
button.
➛➛ button.
• Only Kodak Picture CDs can be played.
• To see the previous 6 pictures, press the
l
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
•
•
: Return to the Album Screen.
: Each time the OK button is pressed, the picture rotates 90
degrees clockwise.
Photo : 1 /215
•
•
: Each time the OK button is pressed, the picture is enlarged up to
2X. (Normal ➢ 2X ➢ Normal)
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
•
•
•
: When this icon is selected and OK is pressed, the pictures
change automatically with about an 6 second interval.
Timer :
: The pictures change automatically with about an 12 second
interval.
: The pictures change automatically with about an 18 second
interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
➢
• When the banner is being appeared, press the RETURN button to return to the album screen.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the
ꢀ,
❷
or
➛
,
❿
buttons on the remote controller to display the menu again.
66
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Problems and Solutions (VCR)
Before contacting the Samsung after-sales service, perform the following simple checks.
Rated voltage
Power consumption
Weight
220 - 240V~, 50Hz
23 Watts
Problem
Explanation/Solution
4.5 Kg
No power
➢
➢
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
GB
GB
General
Size
430mm X 265mm X 94mm
+5°C ~ +35°C
You cannot insert a video cassette
➢
A video cassette can only be inserted with the window
side up and the safety tab facing you.
Operating ambient temperature
Installation conditions
Operation position : Horizontal,
Relative humidity : Below 75%
RCA jack : 1.0Vp-p (unbalanced) 75Ω
RCA jack : -8dBm, 47Kohm unbalanced
The television programme was not recorded
➢
➢
➢
Check the DVD-VCR aerial connections.
Is the DVD-VCR tuner properly set?
Check if the safety tab is intact on the cassette.
Video input (Rear)
Audio input (Rear)
Video input (Front)
Audio input (Front)
RF out
Input
Timer recording was unsuccessful
➢
➢
➢
Was the STANDBY/ON button pressed to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
UHF 21-69 (Initial CH36) : Newzealand model
UHF 28-69 (Initial CH38) : Australia model
RCA jack
No playback picture or the picture
is distorted
➢
➢
Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
Check the TUNER/EXTERNAL setting. It should be on
TUNER.
Audio (DVD, VCR)
Audio (DVD only)
Video (DVD, VCR)
Video (DVD only)
Output
Digital audio out (OPTICAL, COAXIAL)
RCA jack
➢
➢
➢
Check the TV/VCR aerial connections.
Noise bars or streaks on playback
Press the TRK
(
or ) buttons to minimize this effect.
S-Video out
When the
❿
II
button is pressed
A still picture may have “noise bars”, depending on the
COMPONENT out : RCA jack
VHS type video tape,
during playback, the still picture
condition of the tape. Press the TRK or ) buttons
(
has severe “noise bars” streaks
during SLOW motion to minimize this effect.
Tape format
Video Head Cleaning
➢
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
S-VHS type video tape (Playback only)
PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV
Color system
VCR
Tuning system
B/G, D/K : Newzealand model
B/B : Australia model
Video S/N
Above 43dB (standard recording)
Above 240 lines (standard recording)
Above 68dB (Hi-Fi), 39dB (Mono)
20Hz - 20KHz (Hi-Fi)
If when tuning in your TV to the DVD-VCR
TV does not find the Screen
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the DVD-VCR.
2. Carry out the instructions “Tuning Your Television for the DVD-
VCR” (see page 16).
3. Carry out the instructions “Setting the DVD-VCR output
Channel” (see page 25), move the channel number
several channels down from the original setting.
(example: from 36 to 39).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the DVD-VCR.
Resolution
or the pattern when found suffers
from interference, it may be due to the
DVD-VCR output channel clashing with
the normal TV transmissions in your area.
To prevent this you will need to change the
DVD-VCR output channel in the following
way
Audio S/N
Audio frequency characteristics
Disc
DVD
DVD, CD (12cm), CD (8cm), VIDEO-CD (12cm)
95dB
Audio S/N
Audio dynamic range
105dB
5. Re-tune your TV to the DVD-VCR again by following
instructions “Tuning Your Television for the DVD-VCR”
(page 16).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
If you are unable to solve the problem after reading the above instructions, note:
➢ The model and serial number on the rear of your DVD-VCR
➢ The warranty information
➢ A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
68
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide (DVD)
Before requesting service (troubleshooting)
GB
Problem
Action
Page
➢ Ensure that the disc is installed with the label side facing up.
➢ Check the region number of the DVD.
➢ This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a
VIDEO-CD or a CD.
Disc does not play.
P6
➢ 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD-VCR player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
➢ Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
THIS APPLIANCE IS DISTRIBUTED BY
5.1 channel sound is not
being reproduced.
P51
➢ Check if your audio system is connected and working properly.
➢ The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
The
screen.
icon appears on
P55-67
P49-53
ELECTRONICS
Playback mode differs from
the Setup Menu selection.
➢ Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
➢ The Screen Ratio is fixed on your DVDs.
P52
P51
➢ Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
➢ Press power on from a cold start with no disc in the unit. Press the
❿❿ and ➛➛ buttons simultaneously on the front panel for five
seconds. Press the MENU button on the remote control to select the
Parental Mode. The Parental Mode is now unlocked as indicated on
the display. Press the DOWN button to select Parental. Press OK
and the Create Password display will appear. You can now set your
rating level and change your password to a new number.
Forgot password
➢ Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If you experience other
problems.
➢ If the problem still cannot be solved, please contact your nearest
authorized service center.
AK68-00169N
70
Download from Www.Somanuals.com. All Manuals Search And Download.
|