900 MHz Phone
SP-C700R
GG68-00405E
03/10. Rev.1.0
English Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of Major Features
(
Base set : Phone directory ( phone numbers), recent calls
20
calls).
10
WIDE 900 MHz Phone
Remote set : Phone directory ( phone numbers), recent calls ( calls).
10
10
●
Here are some instructions concerning
The phone directory is saved separately from the recent call function and the base
set and the remote set are controlled separately.
various functions of the phone.
Base Set
Remote Set
You can easily carry
the remote set when
moving around.
page
28
An illuminated
dial pad adds to your
convenience. It allows
you to dial phone
numbers even in dark
places.
Recent call function
You can easily search and
redial the most recent numbers
you called without dialing them
up again.
Setting function
You can set and manage your own
settings for various phone
functions.
(Up to 10 calls)
page
23~26
Phone directory search
function
This helps you store or search up to
10 phone numbers.
page
17, 19
page
22
Intercom function
You can easily switch
between an internal call
(intercom) with the base set
and an external call.
Morning call/alarm
function
This button will set an
alarm to sound at a
certain time.
page
28
Recent call
function
You can easily search and redial
the recent numbers you called
without dialing them
page
17~19
Intercom function
You can easily switch between an
internal call (intercom) with the base set
and an external call.
up again. (Up to 10 calls)
page
23~26
Phone directory
search function
This helps you store or
search up to 20 phone
numbers.
page
31
Noise reduction
function
It will detect a clear
channel when the call
has a bad connection
Setting function
You can manage settings for various
phone functions.
On Hook Dialing
You can make a call without
picking up the remote set.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Convenient features
Preparation & Installation
Convenient features for making calls
Help functions
Safety precautions
1
3
5
7
9
28
28
30
31
31
31
31
32
33
Redialing the recently dialed number
Deleting the recently dialed number
Selecting Pulse / Tone Dial Type
Noise reduction
Overview of major features
Table of contents / Components
Product information
Blocking a user from making long
distance calls
Out of range warning
Low voltage warning
29
29
30
Phone installation
Dialing another number after a call (Flash)
Pause function
Adjusting the Flash Time
Initializing the phone
Basic Features
Registering the remote set
Making calls
13
14
15
17
18
Answering calls
Date / Time setting
Using the intercom function
Transferring calls
Reference
Changing the ringing melody and adjusting
the voice volume
Troubleshooting
How to Clean
35
37
38
20
22
23
Morning call / alarm setting
Using the phone directory
Product Specifications
Components
Warranty
card
Base set
Remote set
Charger
Phone line cord
User's manual
Battery
Base adapter
Charger Adapter
(DC 3.6V 450mAh)
(DC 12V 500mA)
(DC 12V 500mA)
●
●
Please check the components.
In case there is a problem with the components, please contact a retail shop where you made your purchase.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Introduction
Base Set
Remote Set
Antenna
�
Use it for redialing the last number you called.
Speaker
●
Screen
Displaying
�Use it for searching or registering numbers in
your own phone directory ( up to 20 numbers ).
�Use it for redialing the last
number you called.
�Use it to navigate upward when moving and
searching through the menu.
�Use it to navigate downward when moving and
searching through the menu.
Battery status
When out of range from the base set
When the line is busy with a call ( ) or
�Use it for searching or
registering numbers in your
personal phone directory
( up to 10 numbers ).
an extension call (
)
Hook switch
Speaker
When searching or registering numbers
in your phone directory
Volume of receiving ring (2 levels)
�Use it for searching the order of
the most recent calls
�Use it for changing the function
setting ( e.g. bell type, device
number ).
Volume of one's voice during a call (3 levels)
�Use it for turning on/off the
power.
�Use it for reducing
misconnected calls or noise.
�Use it for calling, answering or
hanging up.
�Use it for setting or canceling the
phone's features.
�Use it for adjusting the ring
tone or the voice volume.
�
Use it for setting or canceling the
phone's features.
Use it for confirming the function setting.
�Use it for either communicating with
the base set or transferring a call to
the base set.
Use it for setting or
canceling the
morning alarm call.
�Use it for either communicating
with the remote set or
transferring a call to
�
�
�
�Use it for deleting the most recently
called numbers or saved numbers
in searching phone numbers.
Use it for canceling functions.
�Use it for canceling a function.
the remote set.
Use if for adjusting the volume of the ring
tone or speakerphone.
Use it for deleting certain phone numbers
from the directory, recent calls or saved
numbers in searching phone numbers.
Use it for dialing
numbers without
picking up the
handset.
�Use it for making another call
without hanging up.
�Use it for making another call
without hanging up.
Charger connector
Microphone
�
Charger
Call Screen
Standby Screen
Call Restriction
Ring
Speaker
phone
Volume
Call
indicator
Volume
Charger connector
Tone Dial
(indicator)
Bell Off
Dial
Power cable connector
(back side)
(Phone
Number)
LED lamp for
recharging status
Morning call
This shows you the duration of the call.
Hour Minute
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Installation
Installing the Base Set
Loading the battery to the remote set
Connect the phone line.
Open the
battery cover.
Place the
battery as
shown in the
picture.
Rearrange the
line by setting
the battery as
shown in the
picture.
Close the
battery cover.
2
3
4
1
Connect the power
plug to 220V.
DC 12V 500mA
� When you have finished installing the base set, press“On Hook ”button and check for a dial tone.
� If you cannot hear a dial tone, then check both the power and phone line connections.
� This product works for 220V.
How to use the battery
●
Charge the battery for approximately 24
hours before using.
Installing the Remote Set
●
Always remove the battery from the remote
set, when you are not using it for an
extended period.
●
the (
It is best to charge the battery until you see
Connect the power
plug to 220V.
) sign on the screen.
DC 12V 500mA
Battery life
●
The battery life has a 6-month warranty after
purchase.
As time goes by, there will be a reduction in the
battery's power. When battery's power capacity is
reduced by half, purchase a new battery and
replace it.
Please contact your local Samsung Electronics
Service Center on how to purchase and replace
the battery.
●
� Place the remote set on the charger and check if the lamplight is on.
� Press the call button and check for a dial tone.
� If you cannot hear the tone, check the installation.
●
To turn on / off the power
�
�
To turn on the power: Press
button (hold for more than 2 seconds) until
you begin to hear the beeping sound.
If it does not turn on when you press
button, then you probably
need to recharge the remote set. It should then automatically turn on.
Please recharge the battery for 24 hours before using it.
�
�
If you do not charge the battery for at least 6 hours, then in order to
protect it, the battery must be fully charged or it will stop operating.
To turn off the power: Press
you hear the beeping sound.
buttons (hold for more than 3 seconds) until
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Features
■
Making calls
13
14
15
17
18
■
■
■
■
■
Answering calls
Date / Time setting
Using the intercom function
Transferring calls
Changing the ringing melody and
adjusting the voice volume
Morning call / alarm setting
Using the phone directory
20
22
23
■
■
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Calls
Answering Calls
Making a Call with the Base Set
Answering a Call with the Base Set
When using the base-handset
When using the On Hook
When hanging up the phone
�
�
Press
button and dial the number
you want to call.
When calling in standby mode
Pick up the base-handset
and dial the number you
want to call.
You can get
a dial tone in
3 seconds.
Place the handset down on
its position.
Pick up the handset to answer
the call.
�
�
When the Phone Rings
● You can switch from pulse to tone mode by pressing
button during dialing.
● If you have incorrectly dialed the number in standby mode, you can delete a digit by pressing
button and
then pick up the handset or press 'On Hook' button.
What is "On Hook Dialing"?
�
It is a very convenient feature. With it, you can first dial the number you want to call and then pick up the handset
to talk to the caller after identifying his/her voice through the speaker. (NB. If you don't pick up the handset, the
other side can't hear you.)
Making a Call with the Remote Set
Answering a Call with the Remote Set
When the remote set is placed
on the Charger
When hanging up the phone
When the remote set is not
placed on the Charger
When the remote set is placed
on the charger
When the remote set is not
placed on the charger
�
�
Press
button and dial the
Pull out the remote set from the
Pull out the remote set from the
Place the remote set on the charger
press
the call.
button to answer
number you want to call.
When the Phone Rings
charger, press
button and dial
charger and press
answer the call.
button to
or pressing
button.
the number you want to call.
●You can switch from pulse to tone mode by pressing
●You can dial the number before pressing button.
If you have incorrectly dialed the number in standby mode, you can delete a digit by pressing
and then press button.
button during dialing.
●
button
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Date/Time Setting
● Only the hour and minute setting is available on the base set.
●
You need to setup the Date/Time feature in order to see the current time and to use
the Morning Call/Alarm function.
Setting up the Base Set
1
2
3
4
5
Displaying
You will hear a
beep confirming
the completion
of the setting.
�Press 4 digits in the order of
hour, and minute.
Setting up with the Remote Set
1
2
3
4
5
Displaying
You will hear a
beep confirming
the completion
of the setting.
�Press 8 digits in the order of
day, month, hour, and minute.
In the case of a power failure or if you have deliberately disconnected the power,
the date and time will be erased. Therefore you will have to set it up once again.
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Intercom Function Transferring Calls
●
Separating from external calls, you can use intercom function between the base set
and the remote set. In this particular case the calls are not charged.
●
While talking you can transfer the call either to the base set or to the remote set.
Calling from
to
How to transfer from
to
1
2
3
4
1
Base Set
Remote set
Base Set
When the
internal call is
connected,
pick up the
or
handset to talk.
�
Base Set
While talking
When you hear it ringing
●
In order to cancel the intercom during any call, simply press
the hook.
button, or lift up the handset and place it back on
Calling from
to
2
3
4
1
2
3
Remote set
Displaying of the
Internal call
Base Set
When you are
connected
through to the
person, talk on
the phone.
Place the handset on the
hook to hang up the call.
Pick up the remote set and
press button to
talk on the phone.
When you hear it ringing
�
When you hear it ringing,
pick up the handset.
●
To cancel the transferring, simply pick up the handset.
●
In order to cancel the intercom during any call, simply press
the charger.
or
button, or place the remote set on
●
When an external call comes during an intercom talk,
To answer by the base set
→
Press
button on the remote set to hang up the call
To answer by the remote set
→
simply place the handset of the base set on its cradle to
transfer the call.
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring Calls
Changing the Ringing Melody and Adjusting the Voice Volume
(continued)
●You can adjust the type and volume of ring tone melodies as you please.
Base Set
Transferring from
to
Selecting the Ringing Melody
1
2
Remote set
1 2
3
4
5
●Transferring from the
remote set to the base set
Displaying
You will hear
a beep
confirming
the completion
of the setting.
�
Remote Set
While talking
�(Up to 10 available)
�
The current melody will
ring and the number of the
melody will be displayed.
●
--
Silence.
3
4
5
Adjusting the Ring Volume
Adjusting Speaker/ Voice Volume
●You can adjust the volume to 3 levels (High/Medium/Low).
●The volume can be adjusted by 2 levels, Low and High.
●The default setting is medium.
●The original seting is Low.
or
Speaker Volume
After pressing the
button
Stand
by
Press
button one after another.
Press
button one after another.
Place the remote set on the
charger or press
hang up.
button to
When the phone rings
Pick up the handset.
Voice Volume
●
In doing so, you can
●
In doing so, you can
switch the volume to
high, medium or low.
switch the volume to
high, or low.
While talking into
the handset.
●
To cancel the transferring, simply press
button.
19
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Ringing Melody and Adjusting the Voice Volume
(continued)
Morning Call/Alarm Setting
●First, set the current time (see page 15 for more details)
●You can only setup the morning call/alarm on the base set.
●When you set the morning call/alarm, it will give you a wakeup call at a certain time.
Remote Set
Selecting the Ringing Melody
Setting the Time on the Base Set
1 2
3
4
5
1 2
4
5
3
Displaying
Displaying
Time Setting
You will hear
a beep
confirming the
completion of
the setting.
You will hear
a beep
confirming the
completion of
the setting.
�
Press the search button
and select the ringing
melodies that you want
(Up to 10 available)
�
You can select by
�
Press four digits in the
order to set up hours
and minutes.
pressing
one after another.
button
● When you set the Morning call/alarm, it will automatically be enabled.
●
--
Silence.
Adjusting the Ring Volume
Adjusting the Voice Volume
Setting or Canceling the Morning Call /Alarm
●
The volume can be adjusted by 2 levels, Low and High.
●
You can adjust the volume to 3 levels (High/Medium/Low).
●
When you cancel and reset the morning call/alarm,
the time that was last set beforehand will be effective.
●The original seting is High.
●The original seting is Medium.
Wait!
●When you set up your wakeup time, the morning
call/alarm is enabled. It will ring for up to 10 minutes.
●When the morning call/alarm is ringing,
if you want to turn it off, simply press any button on
the base set or lift up and then put down
In standby mode, you can toggle between
setting and canceling using
When it is active, the screen
of the phone displays an icon.
button.
the handset back on to the cradle.
During a
call After
pressing
Or press the call button on the remote set.
Stand
by
Press
button one after another.
Press
button one after another.
button
●
In doing so, you can
●
In doing so, you can
switch the volume to
high, or low.
switch the volume to
high, medium or low.
When the Morning
call/alarm is enabled
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Phone Directory
●
You can register up to 20 phone numbers on the base set.
(
)
(
)
Registering a Phone Number Using the Base Set
Making a Call from the Phone Directory Using the Base Set
2
1
1
1
3
1
2
3
4
Enter the phone number.
You will hear a
beep confirming
the completion
of the setting.
�
Press
button and select
the phone number you want
Press
button or pick up the handset.
�
Press
button.
�
Press
button.
(You can use up to 20 digits)
(
)
Deleting Each of the Numbers in the Phone Directory Using the Base Set
2
3
Using a phone directory with an installed switchboard or an internal phone line.
In case of an installed switchboard or an internal phone, you can usually make external calls
by using an external switch number (mostly 9). When registering the phone number, enter a
pause between the external switch number and the phone number.
The selected
phone number
has been erased.
012-345-6789
Example : To register
�
�
�Press
button and select
the phone number you want
�Press
button.
(
)
(
)
Searching the Phone Directory Using the Base Set
Deleting All of the Numbers in the Phone Directory Using the Base Set
1
2
3
2
3
4
Displaying
All of the saved
phone numbers
have been erased.
�
Press
button
�
Press
button to look up any of
�Press
button.
and hold for at least
3 seconds
the numbers that have been previously
saved.
�Press
button.
●To cancel the deleting, simply press
button.
●When the searching phone number has more than 12 digits, you can use
button to identify
the rest of the number that is not displayed.
24
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Phone Directory(continued)
●
You can register up to 10 phone numbers in the remote set.
(
)
(
)
Making a Call from the Phone Directory Using the Remote Set
Registering a Phone Number Using the Remote Set
1
2
3
1
5
2
3
4
Enter the phone number.
You will hear a
beep confirming
the completion
of the setting.
�
Press
button and select
�Press
button.
the phone number you want
�Press
button
and select the phone
number you want
(You can use up to 20 digits)
�Press
button.
(
)
Deleting Each of the Numbers in the Phone Directory Using the Remote Set
1
2
3
(
)
Searching the Phone Directory Using the Remote Set
The selected
phone number
has been erased.
1
2
3
Displaying
�
Press
button and select
�Press
button.
the phone number you want
(
)
Deleting All of the Numbers in the Phone Directory Using the Remote Set
�
Press
button to look up any of
�Press
button.
the numbers that have been saved.
1
2
3
4
●When the searching phone number has more than 12 digits, you can use
the rest of the number that is not displayed.
button to identify
All of the saved
phone numbers
have been erased.
�Press
button
and hold for at least
3 seconds
�Press
button.
●To cancel the deleting, simply press
button.
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Features for Making Calls
You can call the recently dialed numbers without redialing by yourself.
To Redial a Number
1
2
3
Base Set in
standby mode
�
�
�
�
Convenient Features
Pick up the handset.
(You can press
then pick up the
button and
handset.)
Press
button to search for
Press
button
the recently dialed numbers.
■ Convenient features for making calls
28
�
Remote Set in
standby mode
�
Redialing the recently dialed number
Deleting the recently dialed number
Press
button to search for
Press
button
the recently dialed numbers.
Blocking a user from making long distance calls
Dialing another number after a call (Flash)
●
The most recent numbers are stored in the memory (up to 10 numbers).
Press button of the base set in stand-by mode and pick up the handset to call the last dialed number.
●
●
■
Help functions
30
Press
number.
button of the remote set in stand-by mode and press
button to call the last dialed
Pause function
Selecting Pulse / Tone Dial Type
Noise reduction
To Delete the Recently Dialed Number
Out of range warning
Low voltage warning
1
2
3
4
Adjusting the flash time
Initializing the phone
Base Set in
standby mode
The selected
phone number will
be erased.
�
�
�
�
�
Registering the remote set
Press
button to search for the
recently dialed number to delete.
Press
button
The selected
phone number will
be erased.
�
Remote Set in
standby mode
Press
button to search for the
Press
button
recently dialed number to delete.
27
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Features for Making Calls
Convenient Features for Making Calls / Help Functions
(
)
Using the Base Set
(
)
Using the Base Set /Remote Set
To Block Long Distance Calls
Dial Pause
This function is used
for making external
calls within the
1 2
3
4
5
1
2
3
4
Displaying
internal switchboard.
~
(External switch number)
Base Set in
standby mode
Base Set in
standby mode
�
�
�
�
�
�
�
�
: Impossible to
make long-distance calls
: Enable to
Select from
�
Press
button
~
Press the button.
Press the number to dial.
Pick up the handset.
�
and select the phone
number you want
make a long-distance call
When you pick up the handset
When you press the
button
Remote Set in
standby mode
�
�
�
~
(External switch number)
Select from
Press the button.
~
Press the number to dial.
Press
button.
Base Set
●
In case of an installed switchboard or internal phone line, you can make external calls
by using an external switch number (mainly 9).
●
When the restriction function is enabled, you can make a long distance call with the base set. And you will
also see icon on top of the screen.
(
)
Using the Base Set
Selecting Pulse/ Tone Dial Type
●
When the restriction function is enabled, you
can make a (long distance) call with the base
set. However, when you dial eight first on the
remote set, it will return to standby mode
instead of sending a call.
Remote Set
1
2
3
You can select from
pulse and tone
dial type.
Base Set in
standby mode
�
�
�
(
) (
)
Using the Base Set/Remote Set Flash
�
�
: Pulse Dial
: Tone Dial
Dialing Another Number after a Call
You can make another
call without hanging up
after a call.
Do not hang up
after finishing a call.
Press the number to dial.
Press the number to dial.
4
5
Press for more
than 2 seconds.
You will hear a beep
confirming the completion
of the setting.
Do not hang up
after finishing a call.
Press for more
than 2 seconds.
�
Press
button and select
the phone number you want
▼
:Pulse Dial,
▲
●The pulse dial is originally set.
:Tone Dial
●
See page 31 for selecting the flash time.
●You can change the dial type only from the base set.
29
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Help Functions
Help Functions
This is to initialize the phone to its original condition.
(
)
Noise Reduction Using a Remote Set
(
)
Initializing the Phone Base Set / Remote Set
1
2
When there is a lot of noise,
or when the call has a bad
connection, you can use this
function to reduce irrelevant
noise by changing channels.
1 2
3
4
5
�
Displaying
All functions
will be
initialized with
a completion
sound.
Press
button
When there is
a lot of noise
Base Set in
standby mode
∙
If the noise is not reduced,
press the button several times.
�
�
�
�
�
�
: Initialization set
Initialization
Press
button on the top.
:
cancelled
Out of Range warning with the Remote Set
1
2
This prevents a remote set
from being disconnected
from the base set.
All functions will be initialized
with a completion sound.
Remote Set in
standby mode
�
You will see a
on the top
Press the three buttons at the
same time and hold for at least
3 seconds.
of the screen with a warning sound.
When this occurs, move closer
toward the base set.
When the remote set gets
too far from the Base set
Low Voltage Warning in Remote Set
Default or Initial State
of the Phone
1
2
When the battery voltage of
the remote set falls below a
certain level, a warning is
given.
You will hear a warning sound with
When a battery
�
these
marks blinking.
Base Set
Remote Set
needs recharging
When this occurs, immediately
recharge your remote set.
● Ring type : 1
● Ring type : 1
● Call Restriction : Cancel
● Morning call / alarm time : 06:00
● Ring volume : Medium
● Phone volume : Low
● Recently number : None
● Phone directory : None
● Current time : 24:00
● Dial mode : Pulse
● Ring volume : High
● Phone volume : Medium
● Recently number : None
● Phone directory : None
● Date / Time : 01/ 01 24:00
Adjusting the Flash Time
You can adjust the flash
time.
1 2
3
4 5
Displaying
You will hear a
beep confirming
the completion
of the setting.
�
�
�
�
● Flash time : 100ms
�Press
button to select
the flash time you want.
●You can select the range of the flash time from 0.1 to 1.0 seconds.
31
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Help Functions
(
)
Registering the Remote Set Using Base Set / Remote Set
1 2
3
4
5
6
Displaying
Base Set in
standby mode
�
�
�
�
�
�
Press the two digits
you want.
Reference
7 8
9 10 11 12
Wait a few
seconds and you
will hear a beep
confirming the
completion of the
registration.
Remote Set in
standby mode
Displaying
�
�
�
�
�
■
■
■
Troubleshooting
35
37
38
How to Clean
Enter the same two
digits as you did in
the base set.
Product Specifications
When registering the remote set, the number of the base set and the remote set
must be identical. In addition, it is recommended that you register the remote set
right after registering the base set.
33
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
I cannot hear the tone
when I press button.
I hear many noises while
using the remote set.
I hear beeping warning
sounds in the remote set.
The phone does
not work at all.
The morning call/alarm
does not work.
●Is the phone correctly installed?
(Refer to page 9)
●Is the power correctly connected
to the appropriate voltage?
(Refer to page 9)
●Check if the batteries are
correctly inserted to the remote
set. (Refer to page 10)
●Check if the batteries are
adequately charged.
●Check if the phone is correctly
connected.
(Refer to page 9)
●Check if the power is correctly
connected.
(Refer to page 9)
●Check if the current time is
accurately set.
(Refer to page 15)
●Check if the morning call
time is set.
(Refer to page 22)
●Check if the morning call/alarm
function is set.
(Refer to page 22)
●Press
the noise.
(Refer to page 31)
●Check if the distance is too far
from the base set.
(Refer to page 31)
button to reduce
●Check if the base set is currently
in use. Try again after the call in
the base set has been hung up.
●Check to see if you are too far
away from the base set. If yes,
move closer toward the base set.
(Refer to page 31)
●Try installing the base set at
a different location.
●If you see the
mark on
the screen, hang up the phone
and adequately charge your
remote set.
(Refer to page 10)
●Check if the power is on.
(Refer to page 9)
(Refer to page 31)
●
When there is a problem with radio communication between
the base set and the remote set, do the following, and if it
still will not work, then please contact your local Samsung
Electronics Service Center.
I cannot recharge
the remote set.
Internal or transferring
calls are not working.
The phone does not ring in the
base set or the remote set.
●Check if you have installed the
phone correctly.
(Refer to page 9)
●Try re-registering the remote set
to the base set.
(Refer to page 33)
●Check if the batteries are
correctly inserted.
(Refer to page 10)
●Check if the batteries are
adequately charged.
(Refer to page 10)
●Check if the power of the remote
set is on. (Refer to page 9)
●Try re-registering the remote set
to the base set.
(Refer to page 33)
●Check if the BELL OFF is
selected. (Refer to page 21)
●Check if the charging connector
is clean.
●If the charging connector is not
clean, use a cotton tip or an
eraser to wipe it clean.
●
Follow instructions in the order.
Base
Set
�
�
�
�
�
�
�
�
(Refer to page 37)
●Check if the power voltage is
appropriate. (Refer to page 9)
●If you have cleaned the charging
connector but it still does not
work, then please contact your
local service center and
purchase new batteries.
(Refer to page 10)
Remote
Set
※
See page 33 for registering a remote set
35
36
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Clean
Product Specifications
Model name : SP- C700R
When cleaning the outer
side of the phone.
Apply neutral washer liquid and
wipe it with a cloth.
When cleaning charger
Frequently wipe the charging
connector.
Remote Set
Base Set
Charger
Classification
Power
Unit
V
DC 3.6 V, 450 mAh
Rechargeable battery
DC 12 V, 500 mA
DC 12 V, 500 mA
●Do not use benzene, thinner, etc.
for 220V
Output
Below 10
Below 16
Below 2
mW
kHz
㎶
Frequency
Receiving sensitivity
Usage time for remote set
Operating temperature
Stand by: over 20, Call: over 3
Hours
℃
-10 ~ +40
5 ~ 90
513
%
Operating humidity
Weight
138
122
g
Dimension
When cleaning remote set
Frequently wipe the charging
214×46×23
233×130×57
130×76×75
mm
(length width height)
*
*
connector.
37
38
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
|