* Some of the contents in this manual may differ from your
phone, depending on the software installed or your
service provider.
DUAL BAND
GPRS TELEPHONE
SGH-E700A
ELECTRONICS
Printed in Korea
World Wide Web
Code No.: GH68-04588A
English. 02/2004. Rev.1.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important Safety Precautions................................ 7
Unpacking.............................................................. 9
Your Phone.......................................................... 10
Phone Layout.......................................................... 10
Displays ................................................................. 14
Backlight ................................................................ 18
Built-in Antenna ...................................................... 18
Getting Started.................................................... 19
Inserting/Removing the SIM Card .............................. 19
Installing/Removing/Charging the Battery................... 20
Switching the Phone On or Off................................... 24
Selecting Functions and Options ................................ 25
Call Functions ...................................................... 27
Making a Call .......................................................... 27
Ending a Call........................................................... 30
Answering a Call...................................................... 30
Rejecting a Call ....................................................... 30
Adjusting the Volume............................................... 31
Accessing Options During a Call................................. 31
Using the Ear-microphone......................................... 39
Entering Text....................................................... 40
Changing the Text Input Mode................................... 41
Using the Pinyin Mode .............................................. 42
Using Chinese Stroke Modes...................................... 44
Using the Quick English Mode.................................... 47
Using the English Mode............................................. 49
Using the Number Mode ........................................... 50
Using the Symbolic Mode.......................................... 51
Using the Menus .................................................. 52
Accessing a Menu Function........................................ 52
List of Menu Functions.............................................. 53
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Phonebook Menu ................................................. 60
Find Name (Phonebook 1.1)......................................... 60
Add Entry (Phonebook 1.2).......................................... 63
Speed List (Phonebook 1.3) ......................................... 64
Copy All to Phone (Phonebook 1.4) ............................... 66
Send All via Infrared (Phonebook 1.5)........................... 67
Delete All (Phonebook 1.6) .......................................... 69
Own Number (Phonebook 2.1) ..................................... 70
Group Setting (Phonebook 2.2) .................................... 71
Memory Status (Phonebook 2.3)................................... 72
Service Directory (Phonebook 3.1)................................ 72
Phone Settings .................................................. 107
Greeting Message (Menu 4.1).................................... 107
Display (Menu 4.2) .................................................. 108
Language (Menu 4.3)............................................... 110
Security (Menu 4.4)................................................. 111
Auto Redial (Menu 4.5) ............................................ 114
Side Key (Menu 4.6) ................................................ 114
Fax Mode (Menu 4.7) ............................................... 115
Infrared Activation (Menu 4.8) .................................. 115
Active Folder (Menu 4.9) .......................................... 116
Reset Settings (Menu 4.10)....................................... 116
Messages............................................................. 73
Short Message (Menu 1.1).......................................... 73
Multimedia Message (Menu 1.2) .................................. 80
Voice Mail (Menu 1.3) ................................................ 91
Preset Messages (Menu 1.4) ....................................... 92
Broadcast (Menu 1.5)................................................. 92
Settings (Menu 1.6)................................................... 94
Memory Status (Menu 1.7) ......................................... 97
Organiser........................................................... 117
New Memo (Menu 5.1) ............................................. 117
Calendar (Menu 5.2)................................................ 119
To Do List (Menu 5.3) .............................................. 122
Clock (Menu 5.4)..................................................... 123
Alarm (Menu 5.5) .................................................... 125
Calculator (Menu 5.6) .............................................. 127
Conversion (Menu 5.7)............................................. 128
Timer (Menu 5.8) .................................................... 129
Stopwatch (Menu 5.9).............................................. 130
Call Records......................................................... 98
Missed Calls (Menu 2.1) ............................................. 98
Received Calls (Menu 2.2) .......................................... 98
Dialled Calls (Menu 2.3) ............................................. 99
Delete All (Menu 2.4) ................................................. 99
Call Time (Menu 2.5) ............................................... 100
Call Costs (Menu 2.6)............................................... 101
Network Services............................................... 131
Call Diverting (Menu 6.1).......................................... 131
Call Barring (Menu 6.2) ............................................ 133
Call Waiting (Menu 6.3)............................................ 136
Network Selection (Menu 6.4) ................................... 137
Caller ID (Menu 6.5) ................................................ 138
Active Line (Menu 6.6) ............................................. 138
Sound Settings .................................................. 102
Incoming Calls (Menu 3.1)........................................ 102
Messages (Menu 3.2)............................................... 103
Power On/Off (Menu 3.3).......................................... 104
Connection Tone (Menu 3.4) ..................................... 104
Key Tone (Menu 3.5) ............................................... 105
Minute Minder (Menu 3.6)......................................... 105
Quiet Mode (Menu 3.7)............................................. 106
Fun Box ............................................................. 139
WWW Services (Menu 7.1)........................................ 139
Media box (Menu 7.2) .............................................. 146
JAVA World (Menu 7.3) ............................................ 150
Camera.............................................................. 154
Take Photos (Menu 8.1) ........................................... 154
My Photos (Menu 8.2) .............................................. 159
My Albums (Menu 8.3) ............................................. 159
Delete All (Menu 8.4) ............................................... 160
Settings (Menu 8.5)................................................. 161
Memory Status (Menu 8.6) ....................................... 161
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Using ALS (Alternate Line Service) .................... 162
Solving Problems............................................... 164
Access Codes ..................................................... 167
Phone Password .................................................... 167
PIN...................................................................... 167
PIN2 .................................................................... 168
PUK ..................................................................... 168
PUK2 ................................................................... 169
Call Barring Password............................................. 169
Health and Safety Information .......................... 170
Exposure to Radio-Frequency Energy
(SAR Information) ................................................. 170
Precautions When Using Batteries............................ 171
Road Safety.......................................................... 173
Operating Environment........................................... 173
Electronic Devices.................................................. 174
Potentially Explosive Environments .......................... 176
Emergency Calls.................................................... 177
Other Important Safety Information......................... 178
Care and Maintenance............................................ 179
Glossary ............................................................ 181
Quick Reference Card ........................................ 185
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Precautions
Sensible Use
Unpacking
Your package contains the following items:
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on, especially the phone is in
service.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
Travel Adapter
Hand Strap
Phone
then press the
key. If certain features are in
use, deactivate those features before you can make
an emergency call. Give all the necessary
information as accurately as possible. Do not cut off
the call until given permission to do so.
Battery
Water Resistance
Your phone is not water-resistance. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Wearable
Owner’s Manual
Ear-Microphone
Qualified Service
Note: The items supplied with your phone may be
Only qualified service personnel may install or
repair your phone.
different depending on the country.
For more detailed safety information, see “Health
and Safety Information” on page 170.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Phone
Your Phone
Closed View
Phone Layout
Camera
The following illustrations show the main elements
of your phone:
External
display
Camera key
Open View
Earpiece
Key(s)
Description
Perform the functions indicated by the
text above them, on the bottom line of
the display.
Folder
Main display
(soft keys)
In Menu Mode, scroll through the
menu options.
1
In Idle Mode, the Left key enters the
New SMS message writing screen,
the Right key enters the Incoming
call’s melody setting menu and the
Up key enters the Calendar menu.
The Down key enters the Camera
menu, when pressed and held it
switches the phone to the capture
mode.
Navigation keys
(Up/Down/Left/
Soft key (left)
Right)
Ear-microphone
Soft key (right)
jack
WAP Browser
key
Power On/Off /
Menu exit key
Volume/Menu
browse keys
Dial/Menu
confirmation key
Alphanumeric
keys
In Idle Mode, launches the WAP
(Wireless Application Protocol) browser
directly.
Cancel/Back/
Correction key
IrDA port
Microphone
Special
function keys
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Phone
Key(s)
Your Phone
Description (continued)
Key(s)
Description (continued)
Makes or answers a call.
(on the left side of the phone)
In Idle Mode, accesses the call log list.
In Menu Mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
During a call, adjust the earpiece
volume.
In Idle Mode with the phone open,
adjust the key tone volume.
When pressed and held at an incoming
call with the folder closed, reject the
call or silence the ring tone. See
page 114.
Deletes characters from the display.
When pressed and held in Idle Mode,
quickly accesses the New memo
screen.
In Menu Mode, move back up a
previous menu.
(on the right side of the phone)
Turns the camera capture mode on.
In capture mode, works as a camera
shutter.
Ends a call.
When pressed and held, switches the
phone on or off.
In Menu Mode, cancells your input and
returns to Idle Mode.
When pressed and held in Idle Mode,
quickly accesses your voice mail
server.
Enter numbers, letters and some
special characters.
Used for various purposes in different
functions.
When pressed and held while entering
a phone number, the
pause.
key enters a
When pressed and held in Idle Mode,
the
key enters or exits the Quiet
Mode.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Phone
Your Phone
Icons
Displays
Icon Description
Main Display Layout
Shows the received signal strength. The
more the number of bars, the stronger
the signal.
The display has three areas:
Icons
Appears when a call is in progress. When
your SIM card supports ALS (Alternate
Line Service), this icon may appears with
the number 1, 2, or both like
.
,
,
Text and
graphic area
Appears when you are out of a service
area. When it displays, you cannot make
or receive calls.
Soft keys
Indications
Menu
Phonebook
Appears when you have new or
unchecked voice messages. When your
SIM card supports ALS (Alternate Line
Service), this icon may appears like
Area
Description
,
,
.
First line
Displays various icons. See
page 15.
Middle lines
Display messages, instructions
and any information that you
enter, such as number to be
dialled.
Appears when you have new or unread
messages.
Appears when you have new or
unchecked multimedia messages.
Last line
Shows the functions currently
assigned to the two soft keys.
Appears when you are retrieving a
multimedia message.
Appears when you set the alarms to ring
at a specified time.
Appears when the IrDA port is active. For
details, see page 115.
Appears when you connect the phone to
the computer by the IrDA port.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Phone
Your Phone
External Display
Icon Description (continued)
Your phone has an external display on the folder.
Appears when you are connected to the
GPRS network.
It indicates that you have an incoming call or
message, and notifies you at the specified time
when you set an alarm.
Appears when the Call diverting feature is
activated.When your SIM card supports
ALS (Alternate Line Service), this icon
may appears with the number 1, 2, or
It is also an service available indicator. When you
set the Service light option (Menu 4.2.5.3) to
Type 1 or Type 2, it works. But the phone is no
service area, it doesn’t work.
both like
,
,
.
Appears when you are at the home zone.
May be shown only if your service provider
supports this feature)
When you press and hold one of the volume keys
with the folder closed, the external display’s
backlight illuminates.
(
Appears when your are at the office zone.
When the ear-microphone is connected to the
phone, you can also use the button on it to turn it
on.
(
May be shown only if your service provider
supports this feature)
Appears when you set the alert type for
incoming calls to Vibration or Vibration
then melody. For further details, see
page 103.
After the backlight turns off, if no key is pressed
within a given period of time, depending on the
Light time menu option (Menu 4.2.5.2), the
external display goes into the Off Mode to save the
power. Press and hold one of the volume keys to
awake the external display from the Off Mode.
Appears when the Quiet Mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Main Display Off Mode
If you don’t press any key in a minute after
dimming of the main display, the main display goes
into the Off Mode to save the power. Press any key
to awake the main display from the Off Mode.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Phone
Getting Started
Backlight
The main display and the keypad are illuminated by
a backlight. When you press any key or open the
folder, the backlight illuminates. It turns off if no
key is pressed within a given period of time,
depending on the Backlight menu option. For
further details, see page 109.
Inserting/Removing the SIM Card
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Note: The backlight remains on at all times when the
• Keep all miniature SIM cards out of the reach of
small children.
phone is connected to an optional car kit.
• The SIM card and its data can be easily damaged
by scratches or bending, so be careful when
handling, inserting or removing the card.
Built-in Antenna
• When installing the SIM card, always make sure
that the phone is switched off before you remove
the battery.
Your phone has a built-in antenna. As with other
mobile radio transmitting equipment, do not touch
the antenna unnecessarily when the phone is
switched on. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than needed.
Inserting the SIM Card
1. If necessary, remove the battery by referring to
page 20.
2. Insert and slide the SIM card under the two
tabs, ensuring that the notched corner is top left
and the gold contacts of the card face into the
phone.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
2. Press the battery against the back of the phone
until it clicks into place.
Removing the SIM Card
To remove the SIM card, slide the card out of the
holder, as shown.
Removing the Battery
Installing/Removing/Charging the
Battery
1. Switch off the phone by pressing and holding the
key.
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
2. To remove the battery, pull the battery catch
toward the top of the phone and hold it in that
position. Lift the battery away from the phone.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
standard battery is fully recharged in
approximately 130 minutes.
Installing the Battery
1. Insert the teeth on the bottom of the battery
into the corresponding slots on the phone.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
3. When charging is finished and the battery icon
becomes solid and “Fully charged” message is
displayed, disconnect the adapter from the
power outlet and from the phone by pressing
the grey tabs on both sides of the connector and
pulling the connector out.
Charging the Battery by Using the Travel
Adapter
Note: The phone can be used while the battery is
being charged, but this causes the battery to
charge more slowly.
1. Plug the connector of the travel adapter into the
jack at the bottom of the phone.
Check that the arrow on the connector is facing
towards the front of the phone.
➀
➀
➀
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
2. Plug the adapter into a standard AC wall outlet.
(
), you hear a warning tone and a message
repeats at regular intervals on the display.
While charging, the battery icon at the top right-
hand corner of the displays repeatedly fills to
show that the battery is charging.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
Switching the Phone On or Off
Selecting Functions and Options
To switch the phone on:
1. Open the folder.
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked
and sub-menu allows you to view and alter the
settings of a particular function.
and
. Each menu
2. Hold down the
switches on.
key until the phone
3. If the phone asks for a PIN, enter the PIN and
press the Ok soft key. For further details, see
page 167.
The roles of the soft keys vary according to the
current context; the labels or icons on the bottom
line of the display and just above the soft keys
indicate their current roles.
The phone searches for your network and the
current date and time appear on the main and
external displays. After finding it, you can make
or receive a call.
Example:
Service Provider
Wed 17 Sep
12:53
Service Provider
Wed 17 Sep
12:53
12:53
Wed 17/09
Menu
Phonebook
Menu
Phonebook
Note: To change the language, use the
Language menu option (Menu 4.3).
For further details, see page 110.
1
To switch the phone off:
Hold down the
key until the power-off
animation displays.
Press the right soft
Press the left soft
key to access the
Phonebook feature.
key to access the
menu functions.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Call Functions
To view various functions/options available or select
the one is required:
Making a Call
1. Press the appropriate soft key.
2. To
select the:
Press the
Using the Number Keypad
Select soft key.
When the idle screen is displayed, enter the area
code and phone number, and press the
• function displayed
• option highlighted
key.
Note: If you have set the Auto redial option (Menu
4.5) to On, the number is redialled
view the next function or Down key.
highlight the next option
on a list
automatically up to ten times if the person you
called does not answer or the line is busy. For
further details, see page 114.
move back to the
previous function or
option on a list
Up key.
Correcting the Number
move back up one level
in the structure
(or Back) soft
key or C key.
To clear
Press the
return to Idle Mode
key.
the last digit
displayed
C key.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the Ok soft key.
any other digit in
the number
Left or Right key until the
cursor (|) is immediately to
the right of the digit to be
cleared and press the C key.
You can also insert a missing
digit simply by pressing the
appropriate key.
the all digits
displayed
C key and hold it down for
more than one second.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
3. To dial the number, press the
key.
Making an International Call
To view each call record, see “Call Records” on
page 98.
1. Press and hold the 0 key for the international
prefix. The + character appears.
2. Enter the country code, area code and phone
Viewing Missed Calls
number and press the
key.
If you have a subscription that includes the Caller
Line Identification (CLI) feature and you are unable
to answer a call for any reason, you can find out
who was calling you so that you can call the person
back.
Making a Call from Phonebook
You can store the names and phone numbers called
regularly in the SIM card and phone’s memory,
which are jointly called the Phonebook. You then do
not need to remember all your numbers; simply
select the required name to recall the associated
number.
The number of missed calls displays on the idle
screen immediately after a call was missed.
To view the missed calls immediately:
1. If the folder is closed, open it.
For further details about the Phonebook feature,
see page 60.
2. Press the View soft key.
Using the Call Logs
The list of the missed calls displays.
The phone stores up to 20 calls dialled, received or
missed chronologically. The last call is saved in the
first position. If the same number occurs more than
once, only the latest occurrence is saved.
3. If necessary, scroll to the number you want by
pressing the Up or Down key.
4. To dial the number, press the
key.
To recall any of these numbers:
To use the missed call options, see “Missed Calls”
on page 98.
1. Press the
log list.
key in Idle Mode to access the Call
Note: To clear the missed call notification on the
display, press the
key.
2. Use the Up and Down keys to scroll through the
list until the number you want highlights.
Speed-dialling from Phonebook
The call logs are listed with the following icons:
Once you have stored numbers in the Phonebook,
you can dial a number simply by pressing one or
two keys. For further details, see page 64.
•
•
•
: Dialled calls
: Received calls
: Missed calls
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
Ending a Call
Adjusting the Volume
When you want to finish your call, briefly press the
key or close the folder.
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
When you hear a sound, such as ringtone, you can
also adjust the earpiece volume. But it is not fixed.
Answering a Call
Press the
the
key to increase the volume level and
key to decrease it.
When somebody calls you, the phone rings and
displays the incoming call animation.
If the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook,
displays.
To answer a call, open the folder. If it is already
open, press the
key or Accept soft key.
1
When the Active Folder menu is set to On, you
can answer a call simply by opening the folder. See
page 116.
Note: You can answer a call while using Phonebook or
menu features. The current operation stops.
In Idle Mode with the folder open, you can adjust
the key tone volume using the and keys.
Note: When a call comes in, you can reject the call or
mute the call ringer by pressing and holding
one of the volume keys, depending on your
setting of the Side key menu option (Menu
4.6). For further details, see page 114.
Rejecting a Call
To reject an incoming call, press the
Reject soft key.
key or
If the Side key option is set to Reject, you can
press and hold one of the volume keys on the left
side of the phone to reject an incoming call; see
page 114.
Accessing Options During a Call
Your phone provides a number of control functions
that you can use during a call.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
Switching the Microphone Off (Mute)
Putting a Call on Hold
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can switch between the
calls.
Example: You may wish to say something to
another person in the room but do not
want the calling person to hear you.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want
by pressing the Retrieve soft key.
1. Press the Options soft key.
2. When Mute highlights, press the Select soft
key.
To make a call while you have a call in progress:
The Mute icon (
of the display and your correspondent can no
longer hear you.
) appears on the bottom line
1. Enter the phone number that you want to dial or
look it up in the Phonebook.
2. Press the
key to dial the second call.
To switch the microphone back on:
The first call is automatically put on hold.
1. Press the Options soft key.
Or alternatively:
2. When Unmute highlights, press the Select soft
1. Put the current call on hold by pressing the Hold
key.
soft key.
The Mute icon disappears and your
correspondent can hear you.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
Swap soft key.
Muting/Sending Key Tones
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
You can turn the key tones off or on during a call.
When the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
To end the call on hold, press the Options soft key
and select the End held call option.
When you want to finish, end each call normally by
To communicate with answering machines or
computerised telephone systems, the Send keys
option must be selected.
pressing the
key.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
Answering a Second Call
Searching for a Number in Phonebook
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have activated the Call waiting
option (see page 136). You will be notified of an
incoming call by a call waiting tone.
You can search for a number in your Phonebook
during a call.
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Phonebook option. Press the
Select soft key.
To answer a call while you have another call in
progress:
1. Press the
key to answer the incoming call.
3. Select the Find name option and press the
The first call is automatically put on hold.
Select soft key.
The Phonebook entries are listed.
2. To switch between the two calls, press the Swap
soft key.
4. Enter the first a few letters of the name that you
want to find.
3. To end the call on hold, press the Options soft
key and select the End held call option.
The Phonebook entries are listed starting with
the first entry matching your input.
To end the current call, press the
key.
The call on hold is automatically reconnected to
you.
Note: You can also scroll through Phonebook from
the beginning, by pressing the Up or Down
key
.
Transferring a Call
5. To view the highlighted entry, press the Ok soft
You can transfer the current call to the call on hold
if this service is supported by the network, so that
the callers can talk to each other. You are
disconnected from both of them.
key.
For further details about the Phonebook feature,
see page 60.
1. During a call, answer or make a call in the
Using the Message Service
normal way, and press the Options soft key.
You can read or write a new message during a call.
1. Press the Options soft key.
2. Press the Up or Down key to select the Transfer
option and press the Select soft key.
The two people are connected to each other.
2. Press the Up or Down key to highlight the
Message option. Press the Select soft key.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
Having a Second Call During a Multi-party Call
3. To read a received message, select the Step
option, and then scroll to the message that you
want to read.
To answer or make a call when you have the multi-
party call:
To write a new message, select the New
message option.
1. To place the multi-party call on hold, press the
Hold soft key.
4. Press the Select soft key.
2. Answer or make a call in the normal way.
For further details about the SMS feature, see
page 73.
3. You can reactivate the multi-party call on hold
by pressing the Retrieve soft key.
To end the multi-party call on hold, press the
Options soft key and select the End held
multiparty option.
Making a Multi-party Call
A multi-party call feature is a network service that
allows up to six people to take part simultaneously
in a multi-party or conference call. For more
information, contact your service provider.
To answer an incoming call when you have the
multi-party call in progress and another call on
hold:
1. Press the Accept soft key.
Setting up the Multi-party Call
2. Select the End held option to end the call on
1. Call the first participant in the normal way.
hold.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
Or, select the End current option to end the call
in progress.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the Select soft key.
3. Answer the new call by pressing the
key.
Having a Private Conversation With One
Participant
4. To add a new person to the multi-party call, call
the person in the normal way. Then press the
Options soft key and select the Join option.
Press the Select soft key.
1. Press the Options soft key and select the Split
option. Press the Select soft key.
2. Press the Up or Down key to highlight a
You can add incoming callers by answering the call
and selecting the Join option. Repeat as needed.
participant and press the Select soft key.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
Now you can talk privately with that person. The
other participants can continue to converse with
each other
Using the Ear-microphone
With the ear-microphone, you can make or answer
a call without holding the phone.
3. To return to the multi-party call, press the
Options soft key and select the Join option.
When you connect the ear-microphone to the jack
at the left side of the phone, the button on the
ear-microphone works as listed below:
4. Press the Select soft key.
All of the multi-party call participants can now
hear each other.
To
Press
redial the last call
answer a call
the button twice in Idle Mode.
Removing One Participant
and hold the button when
you receive the call.
1. Press the Options soft key and select the
Remove option.
end a call
and hold the button when
you have finished the call.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
3. End the multi-party call by closing the folder or
pressing the
key.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
Changing the Text Input Mode
The phone allows you to enter characters for
messages and names in Chinese and English. To
enter Chinese text, the phone provides several
widely used pronunciation based (Pinyin) and
character shape based (Stroke) input methods to
meet the preferences of different users, allowing for
greater convenience and ease of use.
When you are in a field that allows characters to be
entered, you will see the text input mode indicator
at the bottom of the display.
Example: Entering a name in Phonebook
Enter name
You can also enter any combination of Chinese
characters, alphabets, numbers, and special
symbols including punctuation marks.
The following the text input modes are available on
your phone:
• Pinyin mode
Text input mode
9
Ok
PY
indicator: Chinese
Pinyin mode
• Chinese Simplified Stroke mode
*
• Quick English mode (T9 mode)
To change to another text input mode:
• English mode
1. Press the right soft key indicating the current
text input mode.
• Chinese Traditional Stroke mode
• Number mode
2. Scroll to the mode you want to use by pressing
the Up or Down key.
• Symbolic mode
You can use the Add word option to add new
words into the T9 dictionary. See page 47.
• Add word mode
Directions for using each of the text input modes
appears later in this section.
Note: If you want to exit the menu without
changing the mode, press the
key.
soft key or
3. Press the Select soft key to confirm the
highlighted text input mode.
*
is a registered trademark of Tegic Communications, Inc. and
is licensed under U.S. Patent 5,818,437/ 5,953,541/ 6,011,554.
4. The selected text input mode indicator on the
bottom of the display.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
3. If you cannot find the character you want from
the display, press the Up or Down key to scroll
through choices in the Character Selection map.
Using the Pinyin Mode
Pinyin is a system to mark Chinese pronunciation in
Latin alphabets. With the pinyin input method, you
can enter Chinese characters by entering the pinyin
string from the phone keypad and the phone
When the character you are typing appears in
the Character Selection Map, you may select it,
without completing the Pinyin spelling or
entering the tone for the character.
automatically presents the matching alternatives.
This mode allows you to enter Pinyin characters
with only one key press per letter.
4. To select a character, press the 1 key to activate
the Character Selection Map. A number, 1 to 5,
is added to the beginning of a corresponding
character. With the Character Selection Map
being activated, a normal press on the 1 to 5
key selects the corresponding character.
Typing Characters in the Pinyin Mode
1. Press keys corresponding to the phonetic
spelling, referring to the Roman letters printed
on the keys. Notice that the choices in the
Character Selection Map change.
Enter name
Example: Typing “
” in the pinyin mode
Enter name
Text Area
Press the
to enter “
3
key
.”
Ok
PY
Key Stroke Area: press
the 5 and 4 keys to
enter “li.”
Notes
:
• To insert a space when entering a text, press the
key when the cursor blinks in the Text Area.
• To remove the activate character in the Character
Character Selection Map
9
Ok
PY
Selection Map, press the
C
key.
2. If there are more than one pinyin spelling
corresponding to your keypress, press the Left
or Right key to select the spelling you want.
Scrolling
To move the cursor left or right through your text
message, press the Left or Right key.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
The table shows the stroke/key relationship:
Inserting a Space
Insert a space between the characters, press the
key in the Text Area.
Clearing Strokes and Characters
Press the C key or more times to remove strokes to
the left. Once the Pinyin Area is empty, pressing the
C key removes characters from the Text Area.
Using Chinese Stroke Modes
These modes allow you to enter individual Chinese
strokes, in written order; from top to bottom, and
from left to right. Your phone provides Chinese
Simplified Stroke mode and Chinese Simplified
Stroke mode.
Typing Strokes and Characters in Stroke
Mode
The two modes work similarly, but the characters
that appear on the display.
1. To type a character, press keys corresponding to
its component strokes. Press keys on the
handset in the order that you would write the
strokes, using one press per each stroke.
Even though there are many different strokes used
to create Chinese characters, the strokes are
classified into 5 basic categories; heng, shu, pie,
dian and zhe. The basic strokes are printed on the
keypad, on the 1 to 5 keys.
Example: Typing “
mode
” in the Chines Stroke
To enter a stroke, press the key printed with the
printed with the stroke that most closely represents
the exact stroke you want.
Press the 5 key to enter
“
to enter “
,”and the.n”the 3 key
9
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
2. The phone displays your strokes in the Key
Stroke Area and offers character choices in the
Character Selection Map. As you enter strokes,
notice that the choices in the Character
Selection Map change. To scroll through choices
in the Character Selection Map, press the Up or
Down key.
Using the Quick English Mode
To type a word, press keys corresponding to the
letters you need. Remember the following as you
are typing:
1. Start entering the word by pressing the 2 to 9
keys. Press each key only once for each letter.
Note: If you are uncertain of the order of one or
more strokes, press the
6
key in place of
Example: To enter “hello” in T9 mode, press the
each questionable stroke. Continue entering
strokes until the character is displayed in
the Character Selection Map or until you
have finished the character.
4, 3, 5, 5, and 6 keys.
Thewordyouaretypingappearsonthedisplay.
It may change with each key that you press.
2. Enter the whole word before editing or deleting
any keystrokes.
3. When the character you are typing appears in
the Character Selection Map, you may select it
without finishing the stroke sequence for the
character. Characters displayed in the Character
Selection Map correspond to the 7 to 0 keys on
the keypad.
3. When the word displays correctly, go to step 4.
If not, press the 0 key repeatedly to display
alternative word choices for the keys that you
have pressed.
To select a character from the Character
Selection Map and add it to your message, press
the corresponding key, 7 to 0.
Example: Both “of” and “me” have the sequence
of 6 and 3. The phone displays the
most commonly used choice first.
Scrolling
4. Insert a space by pressing the
entering the text word.
key and start
To move the cursor left or right through your text
message, press the Left or Right key.
If Spell appears above the left soft key while you
are entering text, the word does not exist in the T9
dictionary. To type words not found in the Quick
English mode, change the text input mode to the
english mode, or proceed as follows:
Clearing Strokes and Characters
Press the C key one or more times to remove
strokes to the left. Once the Stroke Area is empty,
pressing the C key removes characters from the
Text Area.
1. Press the Spell soft key, or press the right soft
key and select the Add word option.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
2. Enter the word you want to add using English
Using the English Mode
mode (see page 49) and press the Ok soft key.
When typing in the english mode, press the key
labelled with the required letter:
- Once for the first letter
The word is saved in the T9 dictionary and
inserted in the input field.
3. Continue entering other words in T9 mode.
- Twice for the second letter
- And so on
Smart Punctuation
Example: To display the letter “C”, quickly press the
2 key three times. To display the letter
“K”, press the 5 key twice. This method is
called Multi-tap typing.
To enter periods, hyphens or apostrophes, press the
1 key. The T9 mode applies rules of grammar to
insert the correct punctuation.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait a few seconds for the cursor to move to
the right automatically, and then enter the next
letter.
Example: The 1 key is used twice to display two
punctuation marks.
l
e
t
‘
s
e
a
t
.
Refer to the table below for more information about
the characters available.
Changing the Case
To shift the case of the next letter(s) that you type,
List of the characters available
press the key. There are three cases; Lower
Case, Initial Capital and Capital Lock.
Characters in the Order Displayed
Key
Upper case
Lower case
Scrolling
• To move the cursor to the left or right within the
text, press the Left or Right key.
• To scroll through alternative world choices for the
keys you have entered, press the 0 key.
Clearing Letters and Words
Press the C key one or more times to clear letters to
the left. Press and hold the key to clear the display.
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
Changing the Case
Using the Symbolic Mode
To shift the case of the next letter(s) that you type,
The symbolic mode enables you to enter symbols in
your text.
press the
key. There are three cases; Lower
Case, Initial Capital and Capital Lock.
Inserting a Space
To
Press the
To insert a space between words, press the
key.
display more
symbols
Up or Down key.
Scrolling
enter a symbol
corresponding number key.
To move the cursor to the left or right within the
text, press the Left or Right key.
return to the
previous text input
mode
Ok or
soft key.
Clearing Letters and Words
Press the C key one or more times to clear letters to
the letter. Press and hold the key to clear the
display.
Using the Number Mode
The number mode enables you to enter numbers in
your text. Press the keys corresponding to the
digits you want to enter.
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
Example: To access the Voice mail menu option,
press the Menu soft key, the 1 and 3 key in Idle
Mode.
List of Menu Functions
Accessing a Menu Function
Various menus let you check or change your phone
settings. The following list shows the menu
structure.
The menus and sub-menus can be accessed by
pressing the Menu or Phonebook soft key in Idle
Mode, then scrolling with the navigation keys.
The numbers assigned to each menu option may
not match the menu number on the phone. It
depends on the services supported by your SIM
card.
1. In Idle Mode, press the Menu soft key to access
the main menu or press the Phonebook soft
key to access Phonebook menu.
2. Scroll through the menus using the Left or Right
key.
Phonebook Menu
3. Find the sub-menu that you wish to use by
scrolling with the Up or Down key.
1. Phonebook (see page 60)
1.1 Find name
1.2 Add entry
1.3 Speed list
4. Press the Select soft key to access the sub-
menu.
1.4 Copy all to phone
1.5 Send all via infrared
1.6 Delete all
If the menu that you have selected contains
further sub-menus, repeat steps 3 and 4.
5. Scroll to the option you want to choose with the
Up or Down key.
2. Management (see page 70)
2.1 Own number
2.2 Group setting
2.3 Memory status
6. Press the Select soft key to choose the setting.
Note: You can return to the previous menu level by
pressing the
soft key.
3. Services (see page 72)
You can also access the menus and sub-menus by
quickly entering the corresponding menu number.
3.1 Service directory
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Menus
Main Menu
2. Call records (see page 98)
2.1 Missed calls
2.2 Received calls
2.3 Dialled calls
2.4 Delete all
1. Messages (see page 73)
1.1 Short message
1.1.1 Inbox
2.5 Call time
1.1.2 New message
1.1.3 Outbox
1.1.4 Delete all
1.2 Multimedia message
1.2.1 Inbox
2.5.1 Last call time
2.5.2 Total sent
2.5.3 Total received
2.5.4 Reset timers
*
2.6 Call costs
1.2.2 New message
1.2.3 Outbox
1.2.4 Draft
2.6.1 Last call cost
2.6.2 Total cost
2.6.3 Max cost
2.6.4 Reset counters
2.6.5 Set max cost
2.6.6 Price/Unit
1.2.5 My folder
1.2.6 Delete all
1.3 Voice mail
1.3.1 Connect to voice mail
1.3.2 Voice server number
1.4 Preset messages
1.5 Broadcast
1.5.1 Read
3. Sound settings (see page 102)
3.1 Incoming calls
3.1.1 Default melodies
3.1.2 My sounds
3.1.3 Ring volume
3.1.4 Alert type
1.5.2 Receive
1.5.3 Channel
1.5.4 Language
1.6 Settings
3.2 Messages
1.6.1 Short message
1.6.2 Multimedia message
1.7 Memory status
3.2.1 Short message
3.2.2 Multimedia message
3.3 Power on/off
3.4 Connection tone
3.5 Key tone
1.7.1 Short message
1.7.2 Multimedia message
3.6 Minute minder
3.7 Quiet mode
* Shown only if supported by your SIM card.
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Menus
4. Phone settings (see page 107)
5. Organiser (see page 117)
4.1 Greeting message
4.2 Display
5.1 New memo
5.2 Calendar
5.3 To do list
5.4 Clock
4.2.1 Wallpaper
4.2.2 Skin
4.2.3 Backlight
4.2.4 LCD brightness
4.2.5 Front LCD
4.3 Language
5.4.1 Set time
5.4.2 Set date
5.4.3 Set world time
5.4.4 Set format
5.5 Alarm
4.4 Security
4.4.1 PIN check
4.4.2 Change PIN
4.4.3 Phone lock
4.4.4 Change password
4.4.5 Privacy
5.6 Calculator
5.7 Conversion
5.7.1 Length
5.7.2 Weight
5.7.3 Volume
5.7.4 Area
5.7.5 Temperature
5.8 Timer
5.9 Stopwatch
4.4.6 SIM lock
4.4.7 FDN mode
*
4.4.8 Change PIN2*
4.5 Auto redial
4.6 Side key
4.7 Fax mode
4.8 Infrared activation
4.9 Active Folder
6. Network services (see page 131)
6.1 Call diverting
4.10 Reset settings
4.10.1 Sound settings
4.10.2 Phone settings
4.10.3 All settings
6.1.1 Divert always
6.1.2 Busy
6.1.3 No reply
6.1.4 Unreachable
6.1.5 Cancel all
6.2 Call barring
6.2.1 All outgoing
6.2.2 International
6.2.3 International except to home
6.2.4 All incoming
6.2.5 Incoming while abroad
6.2.6 Cancel all
6.2.7 Change barring password
* Shown only if it is supported by your SIM card.
56
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Menus
6. Network services (continued)
8. Camera (see page 154)
6.3 Call waiting
6.4 Network selection
6.5 Caller ID
8.1 Take photos
8.2 My photos
8.3 My albums
8.4 Delete all
*
6.6 Active line
8.5 Settings
8.6 Memory status
7. Fun box (see page 139)
**
7.1 WWW Services
*
9. SIM AT(Application Toolkit)
7.1.1 Home
7.1.2 Bookmark
7.1.3 Go to URL
7.1.4 Clear cache
7.1.5 Proxy settings
7.1.6 Current proxy
7.1.7 Push messages
7.2 Media box
7.2.1 Photos
7.2.2 Images
7.2.3 Sounds
7.2.4 Delete all
7.2.5 Memory status
7.3 JAVA world
7.3.1 Downloads
7.3.2 DNS setting
7.3.3 Memory status
*Shown only if it is supported by your SIM card.
*
Shown only if it is supported by your SIM card
** May not be shown or supported by your network service
provider.
58
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
Phonebook offers the following features:
Changing the Phone Memory Entries
Scroll to the category that you want to edit by
pressing the Left or Right key. Following categories
are available and you can edit information of each
category by pressing the Options soft key.
• Phonebook: allows you to find, create or set up
the speed-dialling feature and manage
Phonebook entries.
• Management: allows you to create or remove
your own number, set up caller groups and check
the memory status.
Category Then
Mobile
Home
Office
Fax
Select one of the following options. For
details for these options, refer to the
page 62.
• Services: allows you to use the service directory
depending on your SIM card.
Edit number
Change name
Other
Find Name (Phonebook 1.1)
Send message (shown if the category
contains a number)
To search for a number in the phonebook, proceed
as follows.
Copy (shown if the category contains a
number)
Send via infrared (shown if the
category contains a number)
Delete entry
1. Enter a letter(s) of the name that you want to
find.
The Phonebook entries are listed, highlighting
the entry matching your input.
E-Mail
Group
Graphic
Alert
Enter or edit e-mail address.
Set one of the groups or no group.
Set one of the images or no image.
Set one of the melodies or not assign.
2. If necessary, press the Up or Down key to scroll
to the entry you want.
3. Once you have found the entry, press the Ok
soft key.
4.
To
Press the
dial the displayed
number
key.
change the
Phonebook entries
Options soft key. For
further details, see
page 61.
60
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
Changing the SIM Memory Entries
Add Entry (Phonebook 1.2)
To change the SIM memory entry’s information,
press the Options soft key.
You can store phone numbers and the
corresponding names in the memory of your SIM
card. In addition, you can store up to 1000 names
in the phone memory and each name can be
associated with up to five numbers.
The following options are available:
Edit number
1. Enter the number you want to save.
This option allows you to change the number. You
can also add a new number if none has been stored
for the selected category.
Notes
:
• If you make a mistake while entering a number,
Change name
correct it using the
page 27.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
C
key. For further details, see
This option allows you to change the name of the
entry.
the
key. “P” is displayed to indicate the pause.
To clear the old name, press the C key. For more
information about how to enter characters, see
page 40.
2. When you are sure that the number is correct,
press the Save soft key.
Send message
3. Select the memory where the number is to be
stored, either Phone or SIM, and press the
Select soft key.
This option allows you to send an message to the
number. For more information about how to send a
message, see page 76.
Note: If you change phones, any numbers stored
in your SIM card will automatically be
available with the new phone, whereas any
numbers stored in the phone’s memory
must be stored again.
Copy
This option allows you to copy the entry from the
phone’s memory to the SIM card, and vice versa.
Send via infrared
4. If you select SIM in step 3, go to step 5.
This option allows you to copy the entry from your
phone to another device that has the IrDA port via
infrared.
If you select Phone in step 3, choose a number
type using the Up or Down key and press the
Select soft key.
Delete entry
5. Enter the associated name.
This option allows you to delete the entry from
Phonebook. To confirm the deletion, press the Yes
soft key. Otherwise, press the No soft key.
For information about how to enter characters,
see page 40.
62
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
6. When you are satisfied, press the Ok soft key.
3. Enter a phone number and press the Ok soft
key. Or,
7. If you select Phone in step 3, go to step 8.
To retrieve a number from your Phonebook,
press the Phonebook soft key. Select an entry
from the list and press the Ok soft key. Press
the Ok soft key to save it.
If you select SIM in step 3, enter the location
number and press the Ok soft key.
8. If you want to change the entry, use the options.
for information about how to do it, see page 61.
4. When you have finished, press the
the key to exit.
soft key or
If you want to return to Idle Mode, press the
soft key or the
key.
Editing the Speed-dial Entries
Storing a Number in Idle Mode
1. Select the speed-dial entry you want to edit
from the list and press the Select soft key.
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the Phonebook.
2. Select one of the following menu options by
pressing the Up or Down key and press the
Select soft key:
Continue the procedure from step 1 on page 63 to
store the number.
• Edit number: allows you to change the
number.
• Change name: allows you to change the
name of the entry.
Speed List (Phonebook 1.3)
• Delete: allows you to clear the setting so that
no number is assigned to the key.
You can set up to eight speed-dial entries and then
dial them easily whenever you want, simply by
pressing the associated number key.
3. When you have finished, press the
the key to exit.
soft key or
Setting Up Speed-dial Entries
Using the Speed-dial Feature
1. Press the Up or Down key to scroll to an empty
When the idle screen is displayed, press the number
key, 2 to 9, assigned to the speed-dial entry and
location and press the Select soft key.
2. When the Edit number option highlights, press
press the
key. You can also press and hold the
the Select soft key.
number key.
Note: The
1
key is reserved for your voice mail server
number.
64
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
Dialling a Number Stored in the SIM Card
Send All via Infrared (Phonebook 1.5)
Once you have stored phone numbers in your SIM
card, you can dial them easily whenever required.
Via the infrared connection, you can send your
Phonebook entries to another IrDA- compliant
devices and vice versa.
To dial a number stored in the SIM card:
Note: This feature may not be available depending on
1. Enter the number of the SIM card location where
the number you want to dial is stored.
the devices.
2. Press the
key.
Sending Your Phonebook
The display shows the name and number stored
in that location.
1. Align the IrDA ports on both sides each other.
2. Access the Send all via infrared menu option
in the Phonebook menu and choose one of the
following options and press the Select soft key:
3. Press the Dial soft key or the
key.
• All: allows you to send all of the entries, from
the entry you choose to the end of the SIM
card and Phone list.
Copy All to Phone (Phonebook 1.4)
You can copy all of the numbers stored in the SIM
card to the phone’s memory.
• SIM: allows you to send all of the entries,
from the entry you choose to the end of the
SIM card list.
1. When a confirming message appears, press the
Yes soft key to copy.
• Phone: allows you to send all of the entries,
from the entry you choose to the end of the
Phone list.
The number are copied to the phone’s memory,
labelled with Mobile by default.
Otherwise, press the No soft key.
2. When you have finished, press the
the key to exit.
soft key or
IrDA port
IrDA port
66
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
3. When you select All, your phone displays all of
Delete All (Phonebook 1.6)
the Phonebook entries.
You can delete Phonebook entries selectively
depending on the memory location, or all entries at
once.
When you select SIM or Phone, all of the
entries stored in the corresponding memory
location are listed.
1. Scroll to a memory and place a check mark
4. Scroll to the entry you want to send and press
ahead it by pressing the Select soft key.
the Select soft key.
Selecting All places check marks on all of the
memories.
Your phone begins sending the entry(ies).
Receiving Phonebook from Another Device
2. If necessary, repeat step 1 to check another
options.
1. Align the IrDA ports on both sides each other.
3. When you have finished checking, press the Ok
2. Access the Infrared activation menu (Menu
soft key.
4.8) and select On to activate the port.
4. When a confirming message appears, press the
Yes soft key to delete all of the entries in the
memory(ies). Then enter the phone password
and press the Ok soft key.
3. When your phone receives Phonebook data from
the other device:
If the other person sends you one entry, your
phone displays the name and the phone number
and you can specify whether or not you want to
save it. Continue to step 4.
The password is preset to “00000000” by
default. To change it, see page 112.
Otherwise, press the No soft key.
If the person sends you the entries by All, SIM,
Phone you can select a memory location, SIM
card or phone’s memory. Continue to step 5.
4. Press the Save soft key to store the entry.
You can also delete the entry by pressing the
Cancel soft key.
5. Press the SIM or Phone soft key.
The entries are saved in the appropriate
memory.
68
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
Own Number (Phonebook 2.1)
Group Setting (Phonebook 2.2)
To store your own phone number(s) with a name:
You can change the settings of the five predefined
caller groups.
1. Scroll to an empty location by pressing the Up or
Down key and press the Select soft key.
1. Select a caller group by pressing the Up or Down
key and press the Select soft key.
2. When Edit number highlights, press the Select
soft key.
2. Scroll to a setting option by pressing the Up or
Down key and press the Select soft key.
3. Enter your number and press the Ok key.
The following options are available:
4. To assign a name, press the Down key to move
• Melody: allows you to select a melody to
sound when a call comes in from a member in
the group.
to Change name and press the Select soft key.
5. Enter a name and press the Ok soft key.
• Change name: allows you to change the
name of the group; for further details about
how to enter characters, see page 40.
6. When you have finished, press the
the key to exit.
soft key or
To remove one of your numbers:
• View image: shows the image to display
when a call comes in from a member in the
group.
1. Select the entry you want to delete from the
Own number list and press the Select soft key.
3. Change the setting as required and press the
2. Scroll to Delete by pressing the Up or Down key
Select soft key.
and press the Select soft key.
4. Repeat steps 2 and 3 to change other options.
3. When a confirming message appears, press the
When you have finished, press the
the key to exit.
soft key or
Yes soft key to delete the number.
Otherwise, press the No soft key.
4. When you have finished, press the
the key to exit.
soft key or
70
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Memory Status (Phonebook 2.3)
You can check how many names are stored in SIM
card and phone’s memory.
When you have finished, press the
the key to exit.
soft key or
Service Directory (Phonebook 3.1)
Note: This feature may not be available depending on
your SIM card.
The display shows the list of the numbers in the
Service directory.
If necessary, scroll to a number by pressing the Up
or Down key and press the
number.
key to dial the
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
This menu allows you to create, send, read and
save messages with the Short Message Service
(SMS: text message), Enhanced Message Service
(EMS: message including simple image, animation
or melody) and Multimedia Message Service
(MMS: message supporting the presentation of
various media types, such as full colour images and
polyphonic ring tones). Voice mails are also
available.
Note: This feature is only available if your service
provider’s network supports it. Contact your
service provider for more information.
Short Message (Menu 1.1)
Short message service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to make short messages
consisting of simple pictures, melodies, animations
and styled text all of which adds a new dimension to
simple text messages.
To send text messages by phone, you must obtain
the number of the SMS centre from your service
provider.
Receiving a new message
When you receive a new message, the New
message icon (
) and a text notification showing
the number of the message appear on the display.
You also hear an alert, depending on the message
sound setting; for further details, see page 103.
To read the new message(s) immediately, press the
View soft key. The list of the messages appears.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Note: To clear the new message notification on the
You can scroll to the next or previous message by
pressing the Left or Right key.
display, press the
key.
To scroll through the message contents, press the
Up or Down key. When you focus on an object that
includes a melody, the melody is played.
Managing memory
Inbox and Outbox share a given amount of memory
in your phone or SIM card. When the message
memory is full, the New message icon (
and an error message displays. (It disappears when
you press the key, but it reappears if you
don’t delete old messages.) In this case, you cannot
receive any new messages. You must delete one or
more old messages to get free memory for new
messages using the Delete option within the Inbox
or Outbox or the Delete all option; for further
details, see page 79.
) blinks
You can choose the following options by pressing
the Options soft key:
Delete: allows you to delete the message.
Message reply: allows you to reply by sending a
message.
Call back: allows you to call the sender back.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Inbox (Menu 1.1.1)
Your phone receives incoming messages and saves
them in the Inbox. SMS is usually saved in the SIM
card, but if the SIM memory is full, the incoming
messages will be saved in the phone’s memory.
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
When the Inbox menu is selected, the list of
messages received displays with the:
Extract media: you can save media (except the
predefined EMS animations and sounds) from the
message into Media box. You can use these items
when writing a message; for further details, see
page 77.
• sender’s phone number, or name if stored in the
Phonebook.
• message status;
message to read or
message.
for a read message,
for an incomplete
for a
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory.
To view a message, scroll to it and press the Select
soft key. The screen shows the:
• date and time when the message was received.
• memory where the message was stored;
for
the SIM card or
for the phone’s memory.
• message contents.
75
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
• Add media: allows you to add pictures,
animations and/or melodies to the message.
Select a category; Add picture, Add
animation or Add melody. You can then
choose a factory-set object or an object that
you have received from another source and
stored in the Media box. See page 146.
New Message (Menu 1.1.2)
Using this menu, you can write messages,
containing text, images and melodies.
1. Create a message.
On the first line of the display, you see the
number of remaining characters you can enter,
the number of current message and the
maximum messages you can create, and the
font style you set in Text option.
• Preset messages: allows you to add a preset
message to your text. Select one of nine
messages stored in the Preset messages
menu option (Menu 1.4). See page 92.
• Save message: allows you to save the
message so that it can be sent later. You can
read the message in the Outbox.
Note: For further information about how to enter
characters, see page 40.
2. While entering your message, press the
3. When you have finished entering your message,
Options soft key to use the following options.
choose Send from the options.
• Send: allows you to send the message. Refer
to the next step.
4. Enter a destination number on the Address
screen.
• Text: allows you to format the text. Following
text attributes can all be combined as
required.
You can search for a number in the Phonebook
by pressing the Phonebook soft key.
Text size: Small/Medium/Large
Text mode: Normal/Underscore/Strikethrough
Bold: On/Off
Note: To clear or clear all your input, press or
press and hold the C key. When you have
no input, press and hold the C key to move
to the previous screen.
Italic: On/Off
To send the message to multiple destinations up
to 5, press the Add soft key and repeat step 4.
Alignment: Left/Center/Right
5. When you have finished entering the numbers,
Note: The text attributes you can use are different
depending on whether you are entering
English or Chinese.
press the Ok soft key.
77
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
6. If the Enter centre screen displays, enter the
You can choose the following options by pressing
service number and press the Ok soft key.
the Options soft key:
You can store the SMS service centre number. For
details, see page 94.
Delete: allows you to delete the message.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Note: When the phone fails to send the message;
Press the Retry soft key to try again the
transmission. Or, press the No soft key and
the Save soft key to save the message or
exit the menu by pressing the No soft key.
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Outbox (Menu 1.1.3)
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory or vice versa.
Outbox stores any messages that you have already
sent or just saved without sending.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
Delete All (Menu 1.1.4)
You can delete all messages stored in the SIM card
and phone’s memory in this menu.
• recipient’s phone number, or name if stored in the
Phonebook.
1. Scroll to a message box and place a check mark
• message status;
a message to send.
for a sent message or
for
ahead it by pressing the Select soft key.
Selecting All places check marks on all of the
message boxes.
To view a message, scroll to it and press the Select
soft key. The screen shows the:
2. If necessary, repeat step 1 to check another
box.
• message status;
a message to send.
for a sent message or
for
for
3. When you have finished checking, press the Ok
• memory where the message was stored;
the SIM card or
soft key.
for the phone’s memory.
• message contents.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
You can scroll to the next or previous message by
pressing the Left or Right key.
Otherwise, press the No soft key.
To scroll through the message, press the Up or
Down key.
79
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Notes
:
Multimedia Message (Menu 1.2)
• When you set the Message reception (see
page 95) to Automatic, you cannot enter the
Downloads menu (Menu 7.3.1) and cannot also
access WAP sites while retrieving a new message. If
you message comes in your phone while you play a
Java game, your phone only receive a notification
message. After playing the game, you can retrieve
the message with saved notification message.
• To clear the new message notification on the display,
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides asynchronous delivery of
personal multimedia messages from between
phone and phone, phone and e-mail, phone and
web(by URL).
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and sounds. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
press the
key.
If Message reception sets to Manual (for details,
see page 95), when the New message icon (
appears on the display, you have to retrieve
)
messages in the Inbox. You select a message with
the icon such as and in the Inbox. Then
you can select retrieve or delete message by
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
messages. This function is available only if it is
supported by your service provider. Only phones
that offer picture message features can receive and
display picture messages.
,
pressing the Opt. soft key.
Managing memory
When the memory is full, the New message icon
Retrieving a new message
(
) blinks and an error message displays. (It
disappears when you press the key, but it
When you are retrieving a message, the Retrieving
reappears if you don’t delete old messages.) In this
case, you cannot receive any new messages. You
must delete one or more old messages to get free
memory for new messages using the Delete option
within the Inbox, Outbox, Draft or My folder, or the
Delete all option; for further details, see page 90.
icon (
retrieving a new message, the New message icon
) and a text notification showing the number of
the message appear on the display. You also hear
an alert, depending on the message sound setting;
for further details, see page 103.
) appears on the display. When you finish
(
To read the new message in Idle Mode, press the
View soft key. And then you see the list in the
Inbox. If you select a message, you can read it.
Notes:
• You can only receive up to 150 messages.
• Multimedia message boxes, Camera, and Media box
share a given amount of memory in your phone. You
can also use the Delete or Delete all option to
delete some sounds or images in Camera or Media
box.
81
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Inbox (Menu 1.2.1)
You can choose the following options by pressing
the Opt. soft key:
Your phone receives incoming messages and saves
them in the Inbox.
Delete: deletes the message
When the Inbox menu is selected, the list of
Replay: replays the message.
messages received displays with the:
Reply: replies to the sender by sending a message.
Forward: forwards the message to another person.
Call back: allows you to call the sender back.
• message’s subject or No subject if the message
had no subject.
• message status;
a message to read,
for a read message,
for a read notification
for
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
message and
read.
for a notification message to
Note: The icon of message status can have
various forms like as the
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
,
,
priority that sender fixed (see page 95).
To view a message, scroll to it and press the Select
soft key.
Properties: shows you detailed information about
the message.
To scroll through the message contents, press the
Up or Down key. When the message has more than
one page, you can press the Left or Right key to
move through the pages or the pages are moved
through as paging timing that sender fixed
automatically.
Move to My folder: moves the message to the My
folder for later use.
Notes:
• Some types of sound or picture may not be able to
play or display.
• When the message has an attachment like video
clips, the Attachment icon (
) appears on the title
line. You may not play the attachment. And you may
also not extract it from the message.
83
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
New Message (Menu 1.2.2)
Item
How to add
This menu option allows you to create a new
multimedia message and then send it to multiple
destinations.
Sound
To add a new sound;
1. Select the Record new option.
2. Press the Record soft key to start
1. Select one of the following items using the Up or
recording.
Down key and press the Add soft key.
3. Press the Stop soft key to stop
recording.
Item
How to add
4. Press the Play soft key to replay the
sound. Or, press the Add soft key to
add it. Enter the sound’s name and
press the Ok soft key. The sound is
added to the message and saved in
Media box automatically.
Subject 1. Enter a subject of your message. For
details about entering characters,
see page 40.
2. Press the Ok soft key.
Note: To move a previous screen while
entering a subject, long press the
C key.
To add a sound in Media box;
1. Select one of the sound categories.
The sound list of the category is
displayed.
Picture To add a new picture;
1. Select the Create new option.
2. Select one of the sounds you want to
add.
2. Take a photo using the camera
feature. For details about the
camera feature, see page 154.
3. Press the Select soft key to add it.
Message
1. Enter a message like subject. Or you
can enter a preset message.
3. Select one of picture you want to
add. The picture is displayed.
To enter a preset message;
4. Press the Add soft key.
• Press the Opt. soft key and select
the Preset messages.
Picture To add a picture in Media box;
• Select one of the preset
messages.
1. Select one of the picture categories.
The picture list of the category is
displayed.
2. Press the Opt. soft key and select
the Done option to add the
message.
2. Select one of picture you want to
add. The picture is displayed.
Note: To move a previous screen while
entering a message, long press
the C key.
3. Press the Add soft key.
85
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
2. Press the Opt. soft key to use the following
Phonebook: to enter a destination from the
options.
Phonebook.
• Preview: shows your message as it will
display on the recipient’s phone. To go back to
the message screen, press the Edit soft key.
To send the message, press the Send soft key
and go to step 4.
After entering a destination, press the Ok soft
key.
If it is not an empty entry, do the following
things.
• Send: allows you to send the message to
Edit address: to edit the selected address.
another person. Refer to the next steps.
Delete address: to delete the selected
address.
• Add page: allows you to add up to 10 pages.
You can move to each page using the Left or
Right key on the message screen.
Note: To clear or clear all your input, press or
press and hold the C key. When you have
no input, press and hold the C key to move
to the previous screen.
• Page timing: allows you to set how long one
page of the received messages displays. After
a specified time, the display automatically
scrolls to the next page.
5. To send the message to multiple destinations up
to 20, repeat step 4.
• Clear subject/picture/sound/message:
allows you to delete the subject, image, sound
or message by selected work.
6. When you have finished entering the
destinations, press the Send soft key.
• Delete page: allows you to delete the current
page.
Press the Cancel soft key not to send the
message.
• Save message: saves the message in Draft
(Menu 1.2.4) or My folder (Menu 1.2.5).
When the phone fails to send the message, press
the Retry soft key to try again the transmission.
Or, press the Cancel soft key to save the message.
Note: To go back to the edit screen, press the
soft key or the
C
key.
3. When you finish creating the message, select
Send from the options.
4. Select an entry on the Send screen.
If it is an empty entry, enter a destination as
below.
Number: to enter a destination number.
E-mail: to enter e-mail address.
87
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Outbox (Menu 1.2.3)
Draft (Menu 1.2.4)
Outbox stores messages that you sent, you failed to
send and you cancelled sending.
This message box stores messages that you save,
interrupted messages by an incoming call or
message while you make.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
Note: Saves messages that are failed to send in the
Outbox.
• message’s subject or No subject if the message
had no subject.
To view a message, scroll to it and press the Select
soft key.
• message status;
a message that you failed to send or you
cancelled sending, for a delivery report.
When a receiver retrieves a message you sent,
is changed into
for a sent message,
for
You can choose the following options by pressing
the Opt. soft key:
Send: replies to the sender by sending a message.
Replay: replays the message.
.
To view a message, scroll to it and press the Select
soft key.
Delete: deletes the message.
Properties: shows you detailed information about
the message.
To scroll through the message, press the Up or
Down key. When the message has more than one
page, you can press the Left or Right key to move
through the pages or the pages are moved through
as paging timing that sender fixed automatically.
My Folder (Menu 1.2.5)
You can move the messages stored in the Inbox or
Outbox to the My folder by using the Move to My
folder option. While making a new message, you
can alos save at the My folder by using the Save
message option.
You can choose the following options by pressing
the Opt. soft key:
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
To view a message, scroll to it and press the Select
soft key.
Properties: shows you detailed information about
You can choose the following options by pressing
the message.
the Opt. soft key:
Move to My folder: moves the message to the My
folder for later use.
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
89
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
Voice Mail (Menu 1.3)
When you receive a voice mail, your phone displays
the icon and you hear an alert.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Connect To Voice Mail (Menu 1.3.1)
• In Idle Mode, when you receive a new voice mail,
press the Connect soft key to access your voice
mail server and follow the instructions provided.
Properties: shows you detailed information about
the message.
• In Idle Mode, hold the 1 key down to access your
voice mail server and follow the instructions
provided.
Delete All (Menu 1.2.6)
This menu option allows you to delete all of the
messages in each message box. You can also delete
all of your messages at one time.
• Call your voice mail server number by accessing
the Connect to voice mail menu (Menu 1.3.1)
and follow the instructions provided.
1. Scroll to a message box and place a check mark
ahead it by pressing the Select soft key.
Voice Server Number (Menu 1.3.2)
Selecting All places check marks on all of the
Before using the voice mail service, you must store
the voice mail server number obtained from your
service provider.
message boxes.
2. If necessary, repeat step 1 to check another
box.
When you select an entry, following options are
available.
3. When you have finished checking, press the Ok
soft key.
Edit number: enter a voice mail server number or
press the Phonebook soft key to enter a number
from phonebook. And then press the Ok soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Change name: enter a server name an press the
Ok soft key to save it.
Otherwise, press the No soft key.
Delete: when the confirming message appears,
press the Yes soft key. To cancel, press the No soft
key.
91
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
In the Broadcast menu option, the following options
are available:
Preset Messages (Menu 1.4)
Using this menu, you can preset up to nine
Read: lets you read the received broadcast
messages that you use most frequently. When you
access this menu, the preset message list displays.
messages.
Archive: shows the list of the messages you saved
from the temporary list.
1. Scroll to a message or an empty entry by
pressing the Up or Down key.
Temporary: shows the latest messages. These
messages will be gone when the phone is switched
off.
2. Press the Select soft key and enter a new
message or change the old message.
If the message is long, press the UP or Down key.
For further details about entering characters,
see page 40.
When you read a message, press the Options soft
key to access following options:
3. Press the Ok soft key to save the message.
Cut number: shows the list of numbers included in
the message.
Save: (Temporary only) saves this message to
Archive list.
Broadcast (Menu 1.5)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
Delete: delete this message.
Delete All: delete all message on the list.
Receive: allows you to turn the reception of
broadcast messages on or off.
• the phone is in Idle Mode.
• the Receive option (Menu 1.5.2) is set to On.
Channel: the check mark ahead of All indicates
enable of channel.
• the message channel is currently active on the
channel list.
To enable or disable this channel press the Select
soft key, then select Enable or Disable.
When you get broadcast messages, you can see the
messages in Idle Mode. If it is short you can see the
display, otherwise, press the View soft key to read
the message.
The Add channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel code obtained from your service provider
and a title for the channel.
Language: selects a language you prefer. Then, You
can get cell broadcast messages only in the language
you selected.
93
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Multimedia Message (Menu 1.6.2)
Settings (Menu 1.6)
Using this menu, you can set up default settings for
sending or receiving MMS message. The following
options are available:
Short Message (Menu 1.6.1)
Using this menu, you can set up default SMS
information. The following options are available:
Send settings: The following options are available:
Priority: allows you to set the priority of message.
Service centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
Delivery after: you can set the delay time before
the phone sends your messages.
Validity period: allows you to set the length of
time your messages are stored at the message
centre while attempts are made to deliver them.
Leave a copy: allows you to copy the message that
you sent.
Message type: allows you to set the message type
to Text, Fax, Voice, ERMES, X400, or E-Mail.
The network can convert the messages into the
selected format.
Address hiding: when this option sets to On, your
phone number does not display on the recipients
phone.
Reply path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Delivery report: when this option sets to On, the
network informs you whether or not your message
has been delivered.
Delivery report: allows you to set on or off. When
this function is set to on, the network informs you
whether or not your message has been delivered.
Read reply: when this option sets to On, your
recipient’s phone sends a reply to let you know
when your message was read by her/him.
Receive settings: the following options are
available:
Message reception: allows you to set how you
receive a message. You can select one of Manual,
Automatic and Reject.
Anonymous reject: when this option sets to On,
your phone rejects messages without a caller ID.
Adverts reject: when this option sets to On, you
can reject advertisements by service provider.
95
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Report allowed: when this option sets to Off, your
phone does not send a reply to the recipient’s
phone even if the sender asks for the read reply.
• Bearer: select the bearer to be used for each type
of network accesses.
- GPRS only: it only work in GPRS network.
- GSM only: it only works in GSM network.
MMS profiles: in this menu, you can configure
MMS profile settings that are required when you
send or receive multimedia messages.
Memory Status (Menu 1.7)
Current profile: allows you to select one profile to
use currently.
You can check the memory status for messages.
Profile setting: allows you to set up to five profiles.
• Profile name: enter the name of the profile.
• Server URL: enter the address of profile server.
Short Message (Menu 1.7.1)
You can check how many messages are stored in
SIM card and phone’s memory.
• GSM setting: allows you to change the proxy
settings for the GSM network.
When you have finished, press the
the key to exit.
soft key or
- Gateway: enter the IP address and IP port.
- Data call type: select a network connection
type between ISDN and Analogue.
Multimedia Message (Menu 1.7.2)
- Dial number: enter the server phone
number.
Multimedia message boxes, Camera and Media box
share a given amount of memory in your phone.
- Login ID: enter the server login ID.
- Password: enter the server password.
The display shows the status of used memory.
• GPRS setting: allows to change the proxy settings
for the GPRS network.
- Gateway: enter the IP address and IP port.
- APN: enter the access point name used for
the address of the GPRS network gateway.
- Login ID: enter the user ID required to connect
to GPRS network.
- Password: enter the password required to
connect to the GPRS network.
97
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Records
Call Records
Via this menu, you can view the:
• calls you missed, received or dialled.
• cost of your calls.
Dialled Calls (Menu 2.3)
This option lets you view the last 20 dialled
numbers.
The number, or name if available, displays together
with the date and time when the call was made.
• length of your calls.
Note: You can access the numbers in the three types
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all the calls.
of call records by pressing the
Mode.
key in Idle
• paste the number in the Phonebook.
Missed Calls (Menu 2.1)
This option lets you view the last 20 unanswered
calls if the caller line identification is available.
Delete All (Menu 2.4)
The number, or name if available, displays together
with the date and time when the call was missed.
You can delete all of the numbers stored in each call
record.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the calls.
When a confirming messages appears, press the
Yes soft key to confirm.
Otherwise, press the No soft key.
• paste the number into Phonebook.
Received Calls (Menu 2.2)
This option lets you view the last 20 received calls if
the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was received.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the calls.
• paste the number into Phonebook.
98
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Records
Call Records
Call Time (Menu 2.5)
Call Costs (Menu 2.6)
This option lets you view the timers for calls made
and received.
This feature lets you view the cost of calls.
Notes:
• This feature is not intended to be used for billing
purposes.
• AOC (Advice Of Charge) information may display in
Idle Mode, depending on your SIM card or service
provider.
Notes
:
• If your SIM card supports the ALS (Alternate Line
Service) feature, you must first select the
appropriate line.
• The actual time invoiced for calls by your service
provider may vary, depending on network features,
rounding-off for billing purposes and others.
The following options are available:
Last call cost: cost of the last call made.
The following timers are available:
Total cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set via the Set max cost
option, you can no longer make any calls until you
reset the counter.
Last call time: the length of the last call.
Total sent: the total length of all calls made since
the timer was last reset.
Total received: the total length of all calls
received since the timer was last reset.
Max cost: maximum cost set via the Set max cost
option.
Reset timers: the option used to reset the call
timers. You need to enter the phone password and
then press the Ok soft key.
Reset counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 168) and then press the Ok soft key.
Set max cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 168) and then press the
Ok soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls; you must first enter your PIN2
(see page 168) and then press the Ok soft key.
101
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Settings
Sound Settings
Alert type: lets you specify how you are informed
of any incoming calls.
You can use the Sound settings feature to
customise various settings, such as the:
Melody: the phone rings using the melody selected
via the Melody option. See above.
• ringtone, volume and type for incoming calls or
messages.
Vibration: the phone vibrates but does not ring.
• sounds made when your call is connected or
when you press a key.
Vibration then melody: the phone first vibrates and
then starts ringing.
• quiet mode which your phone switches to when
you hold down the
key.
Messages (Menu 3.2)
Incoming Calls (Menu 3.1)
This option allows you to set up the ringer for
incoming each of short messages and multimedia
messages.
This option allows you to set up the ringer for
incoming calls.
Short Message (Menu 3.2.1)
Multimedia Message (Menu 3.2.2)
/
Note: If your SIM card supports the ALS (Alternate
Line Service) feature, you must select the line
you wish to change first.
The following options are available:
The following options are available:
Tone: lets you choose from many different tones.
Each time you select a tone from the list, the tone is
played.
Each time you select a melody from the list, it plays
the melody.
Default melodies: allows you to select one of the
predefined melodies.
Alert type: lets you specify how you are informed
of any incoming messages.
My sounds: allows you to select one of the sounds
received from other sources, such as the Internet or
other phones.
Silent: only the text notification appears; the phone
neither rings nor vibrates.
Tone: the phone rings using the tone selected via
Ring volume: allows you to adjust the ring
volume. Use the Up and Down keys or the volume
keys on the left side of the phone. The more bars
you see, the louder the volume.
the Tone option. See above.
Vibration: the phone vibrates but does not ring.
Vibration then tone: the phone first vibrates and
then starts ringing.
102
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Settings
Sound Settings
Repetition: allows you to specify how often the
phone informs you of a new message. You can
choose either Once or Periodic.
Key Tone (Menu 3.5)
This menu option allows you to select the tone that
the keypad sounds when you press a dial key.
The following options are available:
Power On/Off (Menu 3.3)
Off: the keys do not make any sound.
This option allows you to select the melody that the
phone sounds when you switch it on or off.
Tone: each key, when pressed, makes a different
sound.
You can choose either Basic or Cheerful. To turn
the sound off, select Off.
Beep: each key, when pressed, makes the same
sound.
Woman: each key, when pressed, makes woman’s
voice.
Connection Tone (Menu 3.4)
Girl: each key, when pressed, makes girl’s voice.
This menu option allows you to specify whether or
not the phone beeps when the phone connects to
the network.
Piano: each key, when pressed, makes a sound like
playing the piano.
Drum: each key, when pressed, makes a sound like
playing the drum.
The following options are available:
Off: the phone does not beep.
To adjust the key tone volume, press the volume
keys on the left side of the phone in Idle mode with
the folder open.
On: the phone beeps when your call is accepted.
Minute Minder (Menu 3.6)
This menu option allows you to specify whether or
not the phone beeps every minute during a call to
keep you informed of the length of your call.
The following options are available:
Off: the phone does not beep.
On: the phone beeps every minute.
105
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Settings
Phone Settings
Many different features of your phone can be
customised to suit your preferences via the
Phone settings menu.
Quiet Mode (Menu 3.7)
When you hold the
key down in Idle Mode, the
phone switches to the Quiet Mode. You can specify
whether the phone vibrates or mutes about all
sounds in the Quiet Mode.
Greeting Message (Menu 4.1)
The following options are available:
Vibration: the phone vibrates rather than rings in
the Quiet Mode.
This menu option allows you to set a greeting
message to be displayed briefly when the phone is
switched on.
Mute: the phone mutes sound settings in the Quiet
Mode.
When you access this menu, the current message
displays.
To
Press the
clear the existing
message
C key and hold it down.
enter a new message appropriatealphanumeric
keys.
save your input
Ok soft key.
cancel your input and
return to Idle Mode
key.
For further information on how to enter text, see
page 40.
107
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Phone Settings
Skin (Menu 4.2.2)
Display (Menu 4.2)
You can change the colour setting of the display
components, such as soft key indications area or
the menu names and icons.
You can change the background image and the
colour of the components on the display according
to your preference and needs.
Backlight (Menu 4.2.3)
Wallpaper (Menu 4.2.1)
You can specify how long the phone uses the
backlight.
This option allows you to change the background
image to be displayed in Idle Mode.
Select how long the backlight remains on after the
last key is pressed or the folder is open.
The following options are available:
Animations: allows you to select one of the
animations.
LCD Brightness (Menu 4.2.4)
Photos: allows you to select one of the photos
This option allows you to adjust the brightness of
the display screens to make them lighter or darker.
taken by the camera.
Images: allows you to select one of the images in
the Images in the Media box menu that are
downloaded from the Internet or the EasyStudio PC
software.
1. Adjust the brightness by using the Up and Down
keys or the volume keys on the left side of the
phone.
Text position: allows you to select the position of
the text displayed on the idle screen, such as the
operator’s name, current date and time, and text
notifications of missed calls or new messages.
Choose either Top or Bottom. If you set this option
to Off, your phone displays only the wallpaper
image.
2. When you are satisfied, press the Ok soft key to
save the selection.
Front LCD (Menu 4.2.5)
You can select a different clock displaying type on
the Front LCD. The following options are available;
Text style: allows you to set the style of the text
displayed on the idle screen.
Clock sliding: allows you to change the displaying
type of the digital clock.
Note: When you set the wallpaper image to
Calendar, the Text position and Text style
options don’t work.
Right to left: The front LCD slides from right to left.
Left to right: The front LCD slides from left to right.
109
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Phone Settings
No sliding: The front LCD doesn’t slide.
Security (Menu 4.4)
Note: If you select the Right to left or Left to right
option, the Speed screen appears. You can set
the sliding speed by pressing the Select soft
key in the Speed screen.
The security settings enable you to restrict the use
of your phone to the people and types of calls of
your choice.
Various codes and passwords are used to protect
the features of your phone. For more information,
see page 167 -169.
Light time: allows you to set how long turn on the
light.
Service light: allows you to set the type of service
light icon. And you can turn the Service light off.
PIN Check (Menu 4.4.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Language (Menu 4.3)
You can select a display language.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
To change your PIN, see the Change PIN menu
option (page 111).
Change PIN (Menu 4.4.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
111
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Phone Settings
Phone Lock (Menu 4.4.3)
SIM Lock (Menu 4.4.6)
When the Phone lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
To enable the SIM lock feature, you must enter a
new four- to eight-digit SIM lock code, and confirm
it by entering it again.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password menu option on the page 112.
The following options are available:
Disable: you can use any other SIM cards with
your phone.
Once the correct password has been entered, you
can use the phone until you switch it off.
Enable: you must enter the SIM lock code to use
another SIM card with your phone.
The following options are available:
To unlock the SIM, enter the SIM lock code.
Disable: you are not asked to enter the phone
password when you switch the phone on.
FDN Mode (Menu 4.4.7)
Enable: you are required to enter the phone
password when you switch the phone on.
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
Change Password (Menu 4.4.4)
The following options are available:
The Change password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
the Phonebook. You must enter your PIN2.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, see the Change PIN2 menu
option on the page 114.
Privacy (Menu 4.4.5)
This feature allows you to lock or unlock the usage
of the contents, such as multimedia messages,
photos, images and sounds.
To enable or disable the Privacy feature, you must
enter your phone password.
113
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Phone Settings
Change PIN2 (Menu 4.4.8)
Fax Mode (Menu 4.7)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
You can use your phone as a modem for faxing
when it is connected to computing devices. You
need to purchase a data kit from your local
Samsung dealer.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
In this menu, you can enable the fax mode on your
phone.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
The following options are available:
Off: you can send or receive data calls.
On: you can send or receive fax calls.
In any case you can send or receive voice calls.
Auto Redial (Menu 4.5)
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
After connecting the phone to your computing
device using the data cable and set this menu to
On. Your phone works as a fax modem.
Note: The interval between two call attempts varies.
For further details about setting and faxing through
the phone on your computer, see the computers
user’s manual.
The following options are available:
Off: the number is not redialled.
On: the number is redialled automatically.
Infrared Activation (Menu 4.8)
Side Key (Menu 4.6)
In this menu, you can activate or deactivate the
infrared port.
This menu option allows you to change the function
of the volume keys on the left side of the phone
when you receive an incoming call.
The following options are available:
Off: deactivates infrared feature on the phone.
On: activates the infrared feature on the phone.
The IrDA icon ( ) appears on the top line of the
display.
The following options are available:
Reject: the incoming call is rejected when you hold
down one of the volume keys.
If there is no communication between your phone
and the IrDA-compliant device within 1 minute of
activating the feature, it is automatically
deactivated.
Silence: the ring tone is silenced when you hold
down one of the volume keys; the call is not
rejected.
115
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Active Folder (Menu 4.9)
This menu allows you to answer a call simply by
opening the folder.
The following options are available:
Off: When this option is selectied, you can answer
a call by pressing the
key.
On: When this option is selectied, you can answer a
call by opening the folder.
Reset Settings (Menu 4.10)
This menu option allows you to reset your phone to
its default configuration. You can reset the sound
settings, phone settings or all of the settings
together.
1. Select one of the settings to reset by pressing
the Select soft key.
2. When a confirming message appears, press the
Yes soft key to reset settings. Then enter the
phone password and press the Ok soft key.
The password is preset to “00000000” by
default. To change it, see page 112.
Otherwise, press the No soft key.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
The Organiser feature enables you to:
• view the calendar and/or write a memo or to do
list.
• set the current date and time, and find out what
time it is in various cities around the world.
• set the alarm so that the phone rings at a specific
time.
• use your phone as a calculator, unit convertor,
timer or stopwatch.
New Memo (Menu 5.1)
This menu option allows you to create a new memo.
Note: You can also access this menu by holding down
the
C
key in Idle Mode.
1. Write your memo of up to 100 characters and
press the Ok soft key.
For further information about how to enter text,
see page 40.
2. Select the category of the memo to be saved
and press the Select soft key.
The following categories are available:
• Scheduler: general schedule events, such as
appointments or meetings.
• To do list: tasks you need to do. They are
saved on the to do list.
• Call: calls you need to make.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
• Anniversary: anniversaries to be
10. You can choose the following option by pressing
remembered, such as wedding anniversaries,
birthdays or other special days.
the Options soft key:
• Add: allows you to add a new memo on the
day.
Note: You can save up to 25 items to each
category, so you can save 100 memos
totally.
• Delete: allows you to delete the memo.
• Edit: allows you to edit the memo.
3. Scroll to a date on the calendar by pressing the
• Move: allows you to move the memo to a
different date.
navigation keys. Press the Select soft key.
• Copy: allows you to copy the memo to a
different date.
4. If applicable depending on the category you
selected, enter the event time and press the Ok
soft key.
11. When you have finished, press the
or the key to exit.
soft key
5. If you have selected the 12-hour time format
(see page 124), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
Calendar (Menu 5.2)
6. To set an alarm for the memo, press the Yes
The calendar helps you to keep track of schedule,
calls that you need to make, tasks that you need to
do and anniversaries. You can set the alarm to ring
when the set date for a schedule is reached.
soft key.
Otherwise, press the No soft key. The memo is
saved immediately. Go to step 10.
7. Enter the time for the alarm to sound and press
Consulting the Calendar
the Ok soft key.
To
Press the
8. If you have selected the 12-hour time format
(see page 124), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
move to another
day
Left or Right key.
move to another
week
Up or Down key.
9. Select an alarm melody and press the Select
move to the
previous or next
month
Up or Down key and hold it
down
soft key.
The memo is saved and then displays on the
screen.
move to the
previous or next
year
Left or Right key and hold it
down.
118
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
The following options are available when you press
the Options soft key on the Calendar display:
Viewing Your Calendar Memos
A date that has a memo associated with it is
highlighted in a red box. If you select a date when
events have already been scheduled, the number of
memos of each type is shown at the bottom of the
calendar.
Add memo: allows you to add a new memo on the
day.
Go to date: allows you to enter a particular date
and then schedule an event on that date.
•
•
•
•
: General schedule events
: To do list
View all: shows all of the events that you have
scheduled.
: Calls
Delete day: deletes the scheduled event on the
selected day.
: Anniversaries
Delete all: deletes all of the events that you have
Press the Select soft key to view the memos.
scheduled.
If you have created more than one memo on the
same day, you can scroll to the event you want to
view by pressing the Left or Right key.
Creating a New Memo
1. Scroll to a date on the calendar, referring to
The following options are available when you press
the Options soft key:
page 119, and press the Select soft key.
2. Write your memo and press the Ok soft key.
Add: allows you to add a new memo. For further
information about how to add a memo, see
page 117.
For further information about how to enter
characters, see page 40.
Delete: allows you to delete the memo.
3. Select the category of the memo to be saved
and press the Select soft key.
Edit: allows you to edit the memo.
The following categories are available:
Move: allows you to move the memo to a different
• Scheduler: general schedule events, such as
date.
appointments or meetings.
Copy: allows you to copy the memo to a different
date.
• To do list: tasks you need to do.
• Call: calls you need to make.
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
4. Follow the procedure from step 4 on page 118
onwards to save the memo.
120
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
Copy: allows you to copy the task to a different
date.
To Do List (Menu 5.3)
This menu allows you to view a list of tasks.
To create a new memo of the To do list type:
Delete: allows you to delete the task.
Delete all: allows you to delete all of tasks from
the list.
1. Write the memo about your task and press the
Ok soft key.
For more information about how to enter
characters, see page 40.
Clock (Menu 5.4)
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
2. Scroll to a date on the calendar, referring to
page 119, and press the Select soft key.
3. Follow step 4 on page 118 onwards to save the
memo.
The following options are available:
Once you have defined tasks, they are listed with a
Set time: allows you to enter the current time. You
can choose the time format in the Set format
menu option; see page 124.
status mark (
for Done or
for Undo) within
the To do list menu.
To scroll to a specific task, press the Up or Down
key and press the Select soft key. The task displays
with the deadline, alarm setting, job details and
status mark.
Note: Before setting the time, you must specify your
time zone in the Set world time menu option.
Set date: allows you to enter the day, month and
year. You can change the date format in the Set
format menu option; see page 124.
You can scroll to the previous or next task by
pressing the Left or Right key.
The following options are available when you press
the Options soft key:
Set world time: allows you to check the current
time in GMT and 21 major cities around the world.
Scroll through the cities using the Left or Right key.
Add: allows you to add a new task. For details
about adding To do list-type memos, see page 117.
The screen shows the:
• city name.
Mark: allows you to change the status mark.
Edit: allows you to edit the contents of the task.
• current date and time.
Move: allows you to move the task to a different
date.
• time difference between the selected city and
your city if you have set the local time (see
below) or GMT (by default).
122
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
To select your time zone:
Alarm (Menu 5.5)
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
This option allows you to set an alarm to ring at a
specific time. You can set up to three alarms or set
the phone to ring an alarm when it is switched off.
The local date and time display.
To set an alarm:
2. Press the Set soft key.
1. Select either Morning call, Alarm1 or Alarm2
by pressing the Up or Down key.
3. To
Select
The
set. The
icon means that no alarm is currently
icon means that an alarm has
update the current Set local.
date/time with this
new setting
already been set.
2. Press the Select soft key.
3. Press the Options soft key.
indicate that the
time zone is
currently using the difference.
Set DST. The
shown next to the time
icon is
daylight saving
time
4. Scroll to an option by pressing the Up or Down
key and press the Select soft key. Change the
setting, as needed.
indicate that the
time zone is no
longer using the
daylight saving
time
Remove DST (only
• Alarm day: place or remove a check mark on
the day(s) of the week by pressing the Select
soft key. If you want to set a daily alarm,
select Everyday. If you want to set a
available when the
icon is shown next to the
time difference).
temporary alarm, select Once alarm. When
you press the Ok soft key after selecting, your
phone asks you to enter the alarm time.
4. When you have finished, press the
the key to exit.
soft key or
• Alarm time: enter the time for the alarm to
sound.
Set format: allows you to change the time and
date formats.
• Alarm tone: select an alarm melody.
• Remove alarm: deactivates the alarm.
Time format: 24 hours
12 hours
5. Repeat step 4 to change each setting.
Date format: DD/MM/YYYY (day/month/year)
YYYY/MM/DD (year/month/day)
6. When you have finished, press the
the key to exit.
soft key or
124
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
Once an alarm has been set, you can see the Alarm
Calculator (Menu 5.6)
icon (
) on the top line of the display. To stop the
alarm when it rings, open and close the phone or
press any key.
You can use the phone as a calculator. The
calculator performs basic arithmetic functions, such
as addition, subtraction, multiplication, division and
remainder computation.
Note: When the Quiet Mode is activated, the alarm
tone doesn’t sound. But When you set an
Morning call, it sounds the alarm tone even if
the Quiet Mode is activated.
To perform a calculation:
1. Enter the first number using the number keys.
To set the alarm to ring even if your phone is
switched off:
Note: To erase any mistakes or clear the display,
press the
C
key.
1. Scroll to Auto power on the Alarm list and
2. Press the
key to enter a decimal point (.) or
press the Select soft key.
the key to enter the appropriate arithmetic
2. If necessary, press the Up or Down key to select
symbol: + (add), - (subtract),
(multiply), /
On.
(divide), % (remainder), ( or ).
To turn the Auto Power feature off, select Off.
3. Enter the second figure.
3. Press the Select soft key to save the setting.
4. Repeat steps 2 and 3, if necessary.
4. When you have finished, press the
the key to exit.
soft key or
5. Press the Equal soft key to view the result.
The result appears in the Answer box.
Once you have activated the auto power alarm, a
check mark appears ahead of Auto power. If the
phone is switched off at the specified alarm time, it
automatically switches on and rings the alarm. It
then automatically switches off again.
Note: The result is rounded to six decimal places.
6. When you have finished, press the
the key to exit.
soft key or
126
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
Units Available
Conversion (Menu 5.7)
Type
Units
This menu option allows you to convert from one
type of unit to another.
Length
mm
km
cm
in
m
ft
To convert a value:
yard mile
kg
1. Scroll to the type of conversion to be performed
from Length, Weight, Volume, Area and
Temperature, and press the Select soft key.
Weight
Volume
g
ton
grain oz
pound
3
3
cm
m
l
2. Enter the value to be converted and press the
3
3
3
in
ft
yd
Down key to move to the From field.
gal
You can enter a decimal point (.) using the
key.
2
2
Area
cm
m
a
2
2
2
in
ft
yd
3. Select the original unit by pressing the Left or
Right key and press the Down key to move to
the To field.
acre
°C
Temperature
°F
Refer to the table on the following page for the
units available.
Timer (Menu 5.8)
4. Select the required unit by pressing the Left or
Right key.
Using the Timer feature, you can set the phone to
sound an alarm after a certain time.
5. Press the Ok soft key or the
key to view the
result.
1. Press the Set soft key.
The result appears in the Answer box.
2. Enter the length of time you want to count down
in hours and minutes and press the Ok soft key.
6. When you have finished, press the
the key to exit.
soft key or
3. Press the Start soft key to start counting down.
Even if you exit the Timer screen, the timer will
continue running. After the specified time has
expired, the phone informs you by playing a melody
and displaying a text notification.
128
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Network Services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you wish.
To stop the timer melody when it rings, open and
close the phone or press any key.
To stop the timer before the end, press the Stop
soft key on the Timer screen.
Notes
:
• The timer uses power from the battery consequently,
the phone’s operating time is reduced.
Call Diverting (Menu 6.1)
• When the Quiet Mode is activated, no sound.
Note: The call divert options may be different
depending on your SIM card and those not
supported by your network operator may not
be shown.
Stopwatch (Menu 5.9)
This network service enables incoming calls to be
rerouted to the number that you specify.
The stopwatch can be used to measure times for
various sports.
Example: You may wish to divert your business
calls to a colleague while you are on
holiday.
Example: Running or swimming races
Up to four stopwatches can be used.
Call diverting can be set up in the following ways:
The precision of the stopwatch is one hundredth of
a second. The maximum measurement time is 10
hours.
Divert always: all calls are diverted.
Busy: calls are diverted if your phone is engaged
on another call.
1. To start the stopwatches, press the Ok soft key.
2. When you wish to stop the first stopwatch, press
the Ok soft key. Repeat this step for the other
stopwatches.
No reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
3. Press the Reset soft key to reset the watches.
Cancel all: all call diverting options are
deactivated.
4. Press the C or
key to exit.
130
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Network Services
You can specify individual call diverting options for
each of the following call types:
Deactivating Specific Call Diverting
Options
• Voice calls only
1. Select the call diverting option to be
deactivated.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
2. Select the type of calls to which this option
applies.
Example: You can:
3. Press the Remove soft key.
• systematically divert fax calls to your
office fax machine.
• divert voice calls to your colleague if
you are already using the phone.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call diverting options by
selecting the Cancel all option.
Setting Call Diverting Options
1. Select the type of call diverting by pressing the
Up or Down key and then press the Select soft
key.
Call Barring (Menu 6.2)
The call barring network service allows you to
restrict your calls.
2. Select the type of calls to be diverted by
pressing the Up or Down key and then press the
Select soft key.
Call barring can be set up in the following ways:
All outgoing: calls cannot be made.
3. Press the Activate soft key to confirm your
settings.
International: international calls cannot be made.
4. Enter the number to which the calls are to be
diverted.
International except to home: when abroad,
calls can be made only to numbers within the
current country and to your home country, that is
the country where your home network provider is
located.
To enter an international code, hold down the 0
key until the + sign displays.
You can also select a number in the Phonebook
or the voice mail server number, by pressing the
Options soft key, followed by Phonebook or
Voice server.
All incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
5. When you are satisfied, press the Ok soft key.
Cancel all: all call barring options are deactivated;
calls can be made and received normally.
The phone sends your settings to the network
and the network’s acknowledgement displays.
132
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Network Services
Change barring password: allows you to change
barring password.
Deactivating Specific Call Barring
Options
You can specify individual call barring options for
each of the following call types:
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
• Voice calls only
• Fax calls only (not available when line 2 is in use)
3. Press the Deactivate soft key.
• Data calls only (not available when line 2 is in
use)
4. Enter your call barring password supplied by
your service provider.
Setting Call Barring Options
The phone sends your settings to the network
and the network’s acknowledgement displays.
1. Select the type of call barring by pressing the Up
or Down key and then press the Select soft key.
You can also deactivate all call barring options by
selecting the Cancel all option.
2. Select the type of calls to be barred by pressing
the Up or Down key and then press the Select
soft key.
Changing the Barring Password
You can set and change the call barring password
obtained from your service provider.
3. Press the Activate soft key to confirm your
settings.
1. Select Change barring password from the
Call barring screen, and press the Select soft
key.
4. Enter your call barring password supplied by
your service provider and press the Ok soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
2. Enter the current password and press the Ok
soft key.
3. Enter a new password and press the Ok soft
key.
4. Enter the new password again to confirm it and
press the Ok soft key.
134
135
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Network Services
Call Waiting (Menu 6.3)
Network Selection (Menu 6.4)
This network service informs you when someone is
trying to reach you during another call.
The Network selection feature enables you to
automatically or manually select the network used
when roaming outside your home area.
You can specify individual call waiting options for
each of the following call types:
Note: You can select a network other than your home
network only if it has a valid roaming
• Voice calls only
agreement with your home network.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
To indicate to automatically or manually select the
network when roaming:
1. Press the Up or Down key until the appropriate
Activating the Call Waiting Feature
option highlights and press the Select soft key.
1. Select the type of calls to which the call waiting
option is to be applied by pressing the Up or
Down key and then press the Select soft key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to step 2.
2. Press the Activate soft key to confirm your
settings.
2. Press the Up or Down key until the preferred
network highlights and press the Select soft
key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You are connected to that network when
roaming.
Deactivating Specific Call Waiting
Options
1. Select the type of call to which the option
applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call waiting options by
selecting the Cancel all option.
136
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Fun Box
The Fun box menu contains several fun options:
Caller ID (Menu 6.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
• WWW services
• Media box
Note: Some networks do not allow the user to change
• JAVA world
this setting.
The following options are available:
WWW Services (Menu 7.1)
Default: the default setting provided by the
network is used.
Your phone comes equipped with a WAP (Wireless
Application Protocol) Browser, making it possible for
you to access the Wireless Web.
Hide number: your number does not display on
the other person’s phone.
Each time you start the WAP Browser, the phone
connects to the Wireless Web and the service
Send number: your number is sent each time you
make a call.
indicator icon (
or
) appears on the display to
inform you that you are connected to the Wireless
Web and will be billed accordingly. Rates vary
according to your service option.
Active Line (Menu 6.6)
The WAP Browser ends the network connection
after a certain period of inactivity and automatically
reconnects as necessary. For this reason, you may
find that you are billed for several network
connections within a single session. This is normal
and is designed to minimise your bill.
Some SIM cards may be used with two subscriber
numbers. This functions is available only if your SIM
card supports it.
This menu option allows you to select the line to be
used to make calls. However, calls can be answered
on both lines, regardless of the selected line.
138
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
Using the WAP Browser Menus
Home (Menu 7.1.1)
There are various menu options available when
surfing the Wireless Web.
When you select this menu option, the phone
connects to the network and loads the homepage of
the Wireless Web service provider.
To access the WAP Browser menu:
Once connected, the homepage displays. The
content depends on the service provider.
1. Press the
key or scroll to the logo on the top
soft
left of all WAP pages and then press the
key.
Note: To quickly launch the WAP browser from Idle
Mode, press the
key.
A list of options appears.
To scroll through the screen, use the Up and Down
keys.
2. Highlight the required option using the Up or
Down key.
To exit the browser, press the
time. The phone returns to Idle Mode.
key at any
3. Press the
soft key to select the option.
4. If necessary, select the secondary option by
pressing the Up or Down key and then press the
soft key.
Navigating the WAP Browser
To
Press the
Note: The WAP Browser menus may vary,
depending on your version of the browser.
scroll through and Up or Down key until the item
select browser
items
you want highlights, and then
press the soft key.
The following WAP Browser menus are available:
Back: returns to the previous page.
select a numbered corresponding numeric key.
item
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
return to the
previous page
(or Back) soft key or C
key.
Exit: exits the WAP browser.
Reload: reloads the current page.
return to the
key and select the Home
startup homepage browser option. For details,
see page 141.
Show URL: shows the URL address of the WAP
page you are currently accessed.
Advanced: the following options are available:
Entering Text in the WAP Browser
Clear cache: clears the information stored in the
cache the phone’s temporary memory used to store
the most recently accessed WAP pages.
When you are prompted to enter text, the current
text input mode appears above the right soft key.
For further information on how to enter text, see
page 40.
About: shows browser information.
140
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
Using the WAP Browser Options
3. Enter the name of the bookmark and press the
Ok soft key.
Several options are available when you are surfing
the Wireless Web. To access these options, press
For further information about how to enter text,
see page 40.
the
key once connected to the Wireless Web.
Goto URL: allows you to manually enter the URL
address of the site that you wish to access.
Once you have stored an address, the following
options are available when you select it.
Bookmark: allows you to use the Bookmark
menu option. For details, see page 142.
Go: allows you to access the site directly.
Edit: allows you to change the name and URL
address of the bookmark.
Messages: allows you to read or write an SMS
message. For details, see page 73.
Delete: allows you to delete the bookmark.
Media box: allows you to use your Media box. For
details, see page 146.
Go to URL (Menu 7.1.3)
Answering a Call During a WAP Connection
This menu option allows you to manually enter the
URL address of the Web site that you wish to
access.
You can receive an incoming call while you are
navigating the WAP browser.
Enter the URL address and press the Ok soft key.
Answer the call by pressing the
key, as you
normally would. After ending the call, you can
continue navigating on the WAP page you
previously were accessed.
For further information about how to enter text, see
page 40.
Clear Cache (Menu 7.1.4)
Bookmark (Menu 7.1.2)
This menu option allows you to clear the
information stored in the cache, the phone’s
temporary memory used to store the most recently
accessed WAP pages.
This menu option allows you to store the URL
addresses of up to 10 of your favourite Web sites.
To store a URL address:
1. Select an empty location and press the Select
Proxy Settings (Menu 7.1.5)
soft key.
This menu option allows you to set up five proxy
servers.
2. Enter the address and press the Ok soft key to
save it.
142
143
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
Note: You do not need to change the browser settings
in most cases. Change the settings only when
your network provider asks you to.
Bearer: you can select the bearer to be used for
each type of network accesses.
GPRS first: your phone will search for the GPRS
network first. If this service is not available, you
can set the GSM service temporarily.
For each proxy, the following options are available:
Proxy name: enter the name of the HTTP proxy
server.
GPRS only: the phone only works in GPRS
networks.
GSM setting: you can change the proxy settings
for the GSM network.
GSM only: the phone only works in GSM networks.
Gateway: enter the IP Address and IP Port
Current proxy (Menu 7.1.6)
Data call type: select a network connection type;
ISDN or Analogue.
This menu option allows you to activate one of the
proxies you set up to use the WAP connection.
Dial number: enter the PPP server phone number.
Login ID: enter the PPP server login ID.
Push messages (Menu 7.1.7)
Password: enter the PPP server password.
This menu allows you to set to be received and read
push messages.
GPRS setting: you can change the proxy settings
for the GPRS network.
Gateway: enter the IP Address and IP Port.
The following options are available:
APN: enter the access point name used for the
address of the GPRS network gateway.
Inbox: Your phone receives push messages and
saves them in the Inbox. And you can read push
messages in the Inbox.
Login ID: enter the user ID required to connect to
the GPRS network.
Setting: This option allows you to set the push
message receiving options.
Password: enter the password required to connect
to the GPRS network.
Always: always push message comes in.
Never: the push message never comes in.
Home URL: you can change the address of your
startup homepage.
Optional: Only the push messages whose setting
matches to the number in this option come in. The
preset number is SMS service centre. You can also
edit the number.
When the default homepage displays, you can
delete it using the C key and enter your own choice.
To enter any special characters, / for example, use
the symbolic mode; see page 51.
Delete all: deletes all of the push messages.
144
145
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
Images (Menu 7.2.2)
Media box (Menu 7.2)
This option allows you to view the images received
from other sources, such as the WAP sites or
multimedia messages.
This menu option stores various media items from
other sources, such as the wireless web or
multimedia messages.
When you select an image, you can use the
following options by pressing the Options soft key:
Photos (Menu 7.2.1)
Send: allows you to send the multimedia message
using the image. For more information about
sending multimedia messages, see page 84.
This option allows you to view the taken pictures.
My photos: allow you to view the photos in my
photos.
Rename: allows you to rename the image.
My album1 / My album 2: allow you to view the
photos in the selected album.
Delete: allows you to delete the image.
Set as wallpaper: allows you to use the image as
the background image of the idle screen.
When you view a photo, press the Options soft key
to do the followings.
Properties: shows you information about the
image, such as the name, size, resolution and
format.
Send: allows you to send it via a message.
Rename: allows you to rename it.
Delete: allows you to delete it.
Sounds (Menu 7.2.3)
Move to album: allows you to move it to one of
This option allows you to listen to the recorded
voices and the melodies received from other
sources, such as the WAP sites or multimedia
messages.
the albums.
Set as wallpaper: allows you to set it as a
wallpaper.
Protection: allows you to protect it from deletion
or not.
Voices: allow you to listen to the recorded voices.
My sounds: allow you to listen to various melodies.
Properties: allows you to view the detail
When you select a sound, press the Options soft
key to send, rename, delete, set as a ringtone (only
in My sounds) or view the properties.
information of the photo.
For further details about these options, see the
options of the Images menu (Menu 7.2.2).
146
147
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
2. If necessary, repeat step 1 to check another
Delete All (Menu 7.2.4)
box.
This option deletes all of the photos, images and
sounds in the Media box.
3. When you have finished checking, press the Ok
soft key.
Photos (Menu 7.2.4.1)
4. When a confirming message appears, press the
Yes soft key to delete all of the sounds in the
box(es).
1. Scroll to a box and place a check mark ahead it
by pressing the Select soft key.
Selecting All places check marks on all of the
boxes.
Otherwise, press the No soft key
2. If necessary, repeat step 1 to check another
box.
Memory Status (Menu 7.2.5)
Media box, Camera and multimedia message boxes
share a given amount of memory in your phone.
3. When you have finished checking, press the Ok
soft key.
The display shows the status of used memory.
4. When a confirming message appears, press the
Yes soft key to delete all of the photos in the
box(es).
Otherwise, press the No soft key.
Images (Menu 7.2.4.2)
When a confirming message appears, press the Yes
soft key to delete all of the images.
Otherwise, press the No soft key.
Sounds (Menu 7.2.4.3)
1. Scroll to a sound box and place a check mark
ahead it by pressing the Select soft key.
Selecting All places check marks on all of the
boxes.
148
149
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
Instructions: shows you the explanation of control
keys, offense items and defense items.
JAVA World (Menu 7.3)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
Configuration: allows you to turn the sound,
vibration on or off and select the game speed from
1 to 5.
Quit: quits the game and returns to the downloads
Downloads: A list of Java games is displayed. In
basic, two pre-loaded MIDlets (Java games) are
provided. If the list of Java games is empty, a pop
up message is displayed to invite to download a
new game. To add MIDlets to the list, you can
download MIDlets from the WAP sites.
menu screen.
Playing a game
Move the character along the street using the
navigation key. If you have enough gold coins which
you can earn while fighting to buy items, you can
buy defense items at the drug store and offense
items at the item shop. Move the character to the
To
Press the
team of current stage and press
key to select it.
find a game
run a game
Up or Down key.
Launch soft key.
Info soft key.
When the snowball fight game starts, hit the rival
kids with snowballs and avoid theirs. While fighting
you can use items you have. If you raise enough
mana, you can also use special attack. You should
win all fights in four stages in order to challenge the
champions of the snowball fight.
view detail
information
delete the game
Delete soft key in the
information display.
Key Commands
4/6 or Left/Right: move left or right
SnowBallFight
2, 5 or Up, :control the distance at the first press
and throw the snowball at the next press.
The goal of this game is to challenge and defeat the
snowball fight champions of four different teams.
8 or Down: use the special attack depending on
your mana
Accessing a game
3: enters item mode to use your item, select the
After loading the game, press any key twice to go
to the first menu screen. At the first menu screen,
item you want to use by pressing 2, 5, Up or
key.
press
key to play a game, or press
key to
Special attacks
access the main menu of this game.
Level 1: Aurora, all enemies are hit by a snowball.
Play: allows you to start a new game or a saved
game. Saved game allows you to continue the
beginning of last stage you played.
150
151
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
Level 2: Ice dragon, all enemies are hit by a
snowball and frozen for 8 seconds.
Playing a game
Your score goes up when you remove the bubbles.
Only when more than 3 same coloured bubbles line
up horizontally or diagonally, they disappear. To line
up the bubbles, move the band rounding three
bubbles to suitable place and rotate it. When the
game is over, your score is ranked on the high score
board if it is within third.
Level 3: Icicle storm, double powered snowball
attack to all enemies and decreasing enemies’
attack accuracy for 10 seconds.
BubbleSmile
BubbleSmile is a arcade puzzle game.
Accessing a game
Key Commands
2, 4, 6, 8, or navigation key: move the band up,
down, left or right
After loading the game, you will see the following
options, press
key to select one of them:
1: rotate the bubbles in the band counterclockwise
3: rotate the bubbles in the band clockwise
Start game: allows you to start a new game with
timed mode or skilled mode.
DNS setting: The DNS (Domain Name Server)
address to connect the Java server is automatically
set when making data call set up. The address is
provided by the network operator automatically, but
you can change it manually at this menu.
• Timed mode: you have to achieve the best score
before gauge disappear at the time bar. When
you get the same coloured bubble together,
gauge at the time bar increases.
• Skilled mode: you have to make more than 4
bubbles disappear at once for the gauge at the
skill bar increase. If 3 or none of bubbles
disappear, then the gauge decreases.
Memory status: You can check the used space for
Java download.
Continue: allows you to continue the last game
you played. The menu is only available when a
game has already been played.
High score: shows you the high score table.
How to play: shows you the instruction of this
game.
Option: allows you to set the sound on or off
152
153
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera
Camera
3. Press the Capture soft key or the Camera (
)
key on the right side of the phone to take a
picture.
Using the camera module embedded in your phone,
you can take pictures for people or events while on
the move. Additionally, you can send photos to
other people in a picture message or as an e-mail
attachment. The camera produces JPEG pictures.
The picture is automatically saved in the My
photos menu (Menu 8.2).
Note: While taking a picture, if you have any noise
in your display, press the key.
2
Take Photos (Menu 8.1)
4.
To
Press the
This menu allows you to take a picture to send the
photo as a picture message to other destinations.
You can use the picture as a background and store
it separately in My album folder.
use the options
Options soft key.
For details about the
options, see below.
delete the picture file
Delete soft key.
return to the capture
mode to take another
picture.
C key.
Taking a Picture with the Folder Open
1. To access this menu, press the Select soft key
when Take photos highlights. Or, press the
Down key in Idle Mode.
turn the camera off and
return to Idle Mode
key.
To take pictures immediately in Idle Mode, long
press the Camera ( ) key on the right side of
the phone or long press the Down key.
When you press the Options soft key in step 4, the
following options are available. Scroll the option you
want by pressing the Up and Down keys and press
the Select soft key:
The image to be captured appears on the
display.
Send: allows you to send a multimedia message
using the taken picture. For further details about
sending multimedia messages, see page 84.
The icons on the top line of the display indicate
the current mode, brightness, size and quality.
Rename: allows you to rename the taken picture.
2. Adjust the image by aiming the camera to the
subject.
Go to my photos: allows you to see the taken
pictures in the My photos (Menu 8.2).
Use the Left and Right keys to adjust the
brightness of the picture.
Set as wallpaper: allows you to use the image as
the background image.
The Up, Down and volume keys zoom in and out
the image.
You can set the camera options. See page 156.
154
155
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera
Camera
Protection: allows you to protect the taken picture
Frame: this option allows you to use a frame on
from deletion or not.
the picture. Press the navigation key to find the
frame format you want to use. You can preview the
image with the frame format by using the Preview
soft key. The picture size set to Mobile(128*120)
automatically, and Frame mode is not allowed in
Self shot.
Properties: this option shows you information
about the picture, such as name, size, date,
resolution, protection type and format.
Using the Camera options
Effects: this options allows you to apply special
effects to the picture. Press the Up or Down key to
find the tone you want to use. Gray, Negative,
Sepia, Emboss, Sketch are available. To
deactivate the effect setting, select Off.
When you press the Options soft key in the
capture mode, the following options are available
for the current shot:
Mode: You can take a picture in various modes.
Once you change the mode, its indicator appears at
the top left on the display.
Rotation: this option allows you to flip the image
vertically or reverse it as a mirror image.
Normal shot: you can take a picture in the normal
mode.
Timer: you can select the delay time for all modes.
In Self shot mode, captures by the Capture soft
key or the Camera ( ) key on the right side of the
phone. In another modes, captures by the Left soft
key or the Camera ( ) key on the right side of the
phone. When you press the capture key, the phone
takes the picture after the specified time. When you
exit the camera mode or select Off in the Timer
menu, the timer is off.
Self shot: this mode allows you to take a picture
using the external display. Press the Camera (
)
key on the right side of the phone after adjusting
the image, and the phone takes and saves the
picture. After you take a self shot, press the
Review soft key to review the taken picture.
Multi-shot: you can take action stills. Select speed
and the number of pictures you want to take. When
Settings: this option allows you to change the
options for taking a picture. And this option is
synchronized with the Settings menu (Menu 8.5).
you press the Capture soft key or the Camera (
key on the right side of the phone, the phone
automatically takes and saves the pictures
successively as many times as you set. A picture
size set to Mobile(128*120) automatically.
)
Photo size: sets the image size to one of
VGA(640*480), QVGA(320*240),
QQVGA(160*120) and Mobile(128*120). The
selected image size displays on the capture screen.
Night mode: this option allows you to take a picture
of the best quality when it is dark.
Photo quality: allows you to select the image quality
from Superfine, Fine, Normal, and Economy.
The option you select appears on the top of the
display.
Capture only: you can take pictures without review.
156
157
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera
Camera
Shutter sound: allows you to select a sound when
you press the shutter, the Capture soft key or
Camera ( ) key on the right side of the phone.
My Photos (Menu 8.2)
In this menu, you can review the pictures you have
taken.
Note: This sound setting is not applied to the Multi-
shot sound.
To
Press the
Default name: allows you to change the default
prefix of the picture name.
scroll through the pictures navigation keys.
show the selected picture
as an enlargement
View soft key.
Help: this options shows you the functions of the
navigation keys and the volume keys in the capture
mode.
go back to the multiple
view mode
Multi soft key.
Taking a Picture with the Folder Closed
use the options
Options soft key. For
details, see page 155.
1. Close the folder.
turn the camera off
key.
and return to Idle Mode
2. To turn the camera on, press and hold the
Camera ( ) key on the right side of the phone.
The image to be captured appears on the
display. The volume keys zoom in or out the
image.
My Albums (Menu 8.3)
My Album allows you to store the pictures as your
photo album. Select one of albums. It shows the
pictures saved in the album. For details about
viewing your pictures and using them, see
page 159.
3. Press the Camera ( ) key on the right side of
the phone to take the picture.
The picture is automatically saved in the My
photos menu (Menu 8.2).
4. To review the taken picture, open the folder and
press the No soft key. You can delete the picture
by pressing the Delete soft key, return to the
self shot mode by pressing the Preview soft
key.
To exit the camera mode, open the folder and
press the Yes soft key or close the folder.
158
159
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera
Camera
Delete All (Menu 8.4)
Settings (Menu 8.5)
You can delete all the photos saved in each
category.
This menu option allows you to change the default
settings of the options for using the camera feature.
The following options are available:
1. Scroll to a photo box and place a check mark
ahead it by pressing the Select soft key.
Photo size: sets the image size to one of
VGA(640*480), QVGA(320*240),
QQVGA(160*120) and Mobile(128*120). The
selected image size displays on the capture screen.
Selecting All places check marks on all of the
photo boxes.
2. If necessary, repeat step 1 to check another
box.
Photo quality: allows you to select the image
quality from Superfine, Fine, Normal, and
Economy. The option you select appears on the top
of the display.
3. When you have finished checking, press the Ok
soft key.
Shutter sound: allows you to select a sound when
you press the shutter, the Capture soft key or
Camera ( ) key on the right side of the phone.
4. When a confirming message appears, press the
Yes soft key to delete all of the photos in the
box(es).
Note: This sound setting is not applied to the Multi-
Otherwise, press the No soft key.
shot sound.
Default name: allows you to change the default
prefix of the picture name.
Memory Status (Menu 8.6)
Camera, Media box and multimedia message boxes
share a given amount of memory in your phone.
The display shows the status of used memory.
160
161
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ALS (Alternate Line Service)
Using ALS (Alternate
Line Service)
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make
and receive calls on either line. If you subscribe to
this network service, a few additional menu options
enable you to set up this feature.
Setting Call Diverting Options
You can set up call diverting via the Call diverting
menu option (Menu 6.1). This service reroutes
incoming calls on the line of your choice to a
specified number. For further details, see page 131.
Viewing Call Information
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
You can view call times and last call cost
information for each line. For further details, see
page 100.
Selecting a Line
You can select a line for each call via the Active
line menu option (Menu 6.6). For further details,
refer to page 138.
Editing the Line Name
You can edit the name of each line via the Own
number menu option.
When you edit the name of a line, this name
replaces “Line 1” or “Line 2”, as applicable. For
further details, refer to page 70.
Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each
line via the Incoming calls menu option (Menu
3.1). For further details, see page 102.
162
163
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems
Solving Problems
“No service” displays
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded
by buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
When you switch your phone on, the
following messages may appear
No SIM card
Check that the SIM card is correctly installed.
You have entered a number but it was
not dialled
Phone locked Enter password
• Have you pressed the
key?
The Phone lock feature is enabled. You must enter
the phone’s password before you can use the
phone.
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Enter PIN
Your correspondent cannot reach you
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• The PIN check feature is enabled. Every time the
phone is switched on, you must enter the PIN. To
disable this feature, use the PIN check menu
option (Menu 4.4.1). See page 111.
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
Enter PUK
• Have you switched off the microphone (Mute
appears)?
The PIN was entered wrongly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your network operator.
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
164
165
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
The phone starts beeping and “Battery
Low” flashes on the display
The battery is insufficiently charged. Replace the
battery and recharge it.
Some access codes can be changed using the
Security menu option (Menu 4.4). See page 111
for further details.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
Phone Password
The Phone lock feature (see page 112) uses the
phone password to protect your phone against
unauthorised use.
No number is dialled when you recall a
Phonebook entry
The phone password is supplied with the phone and
is preset to “00000000” at the factory. To change
the password, use the Change password menu
option (Menu 4.4.4). See page 112.
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store them, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
PIN
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. It is
usually supplied with the SIM card. When the PIN
Check feature is enabled (see page 111), you must
enter the PIN each time you switch on the phone.
Then contact your local dealer or Samsung
after-sales service.
If you key in an incorrect PIN three times in
succession, key in the PUK and press the Ok soft
key to unlock the phone. Key in a new PIN and
press the Ok soft key. Key in the new PIN again and
press the Ok soft key.
166
167
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Codes
Access Codes
PIN2
PUK2
The PIN2, supplied with some SIM cards, is required
to access some functions, such as charging unit
counters. These functions are only available if
supported by your SIM card.
The PUK2, supplied with some SIM cards, is
required to change a blocked PIN2.
If you key in an incorrect PUK2 ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the Ok soft
key to unlock the phone. Key in a new PIN2 and
press the Ok soft key. Key in the new PIN2 again
and press the Ok soft key.
You cannot change the PUK2. If you lose the code,
contact your service provider.
Call Barring Password
PUK
The 4-digit call barring password is required when
you use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function.
The PUK (PIN Unblocking Key) is required to change
a blocked PIN. The PUK may be supplied with the
SIM card. If not, contact your local service provider.
If you key in an incorrect PUK ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
You can change this password using the Change
barring password menu option (Menu 6.2.7).
For further details, see page 135.
You cannot change the PUK. If you lose the code,
contact your service provider.
168
169
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Health and Safety
Information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
The highest SAR value for this model phone when
tested for compliance against the standard was
0.795W/kg. While there may be differences
between the SAR levels of various phones and
various positions, they all meet the EU
Exposure to Radio-Frequency Energy
(SAR Information)
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
requirements for RF exposure.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
*
the EU Council is 2.0W/kg.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary depending on national reporting
requirements and the network band.
170
171
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Health and Safety Information
• If left unused, a fully charged battery will
discharge itself over time.
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
Operating Environment
Remember to follow any special regulations in force
in any area and always switch your phone off
whenever it is forbidden to use it, or when it may
cause interference or danger.
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
172
173
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Health and Safety Information
Other Medical Devices
Electronic Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment
that has been added to your vehicle.
recommendations of Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to
minimise potential interference.
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
174
175
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Health and Safety Information
Potentially Explosive Environments
Emergency Calls
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
Users are advised to switch the phone off while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 120 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
176
177
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Health and Safety Information
Other Important Safety Information
Care and Maintenance
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Switch your phone off before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
178
179
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features of your mobile phone,
here are a few definitions.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
ALS (Alternate Line Service)
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
Capability of associating two lines with one SIM
card. With this service, you can make and receive
calls on either line, as required.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming
call when engaged on another call.
CLI (Caller Line Identification) Services
Services allowing subscribers to view or block the
telephone numbers of callers.
180
181
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Glossary
EMS (Enhanced Message Service)
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and later also video clips and presentation
information.
Network service sending and receiving messages
that include images, sounds and animations to and
from another user without having to speak to the
correspondent.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
Multiparty Calling
GSM (Global System for Mobile
Communication)
Ability to establish a conference call involving up to
five additional parties.
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
IrDA (Infrared Data Association)
A standard defined by the IrDA consortium. It
specifies a way to wirelessly transfer data via
infrared radiation. The IrDA specifications include
standards for both the physical devices and the
protocols they use to communicate with each other.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
182
183
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using
• is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
184
Download from Www.Somanuals.com. All Manuals Search And Download.
185
Download from Www.Somanuals.com. All Manuals Search And Download.
186
Download from Www.Somanuals.com. All Manuals Search And Download.
|