COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
(OPTION)
PICTURE IN PICTURE
TELETEXT
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
N CONNECTING AND PREPARING YOUR TELEVISION
I
I
I
I
I
I
I
I
I
I
View of Your Television (depending on the model).......................................
Infrared Remote Control (depending on the model)......................................
Inserting the Batteries in the Remote Control................................................
Connecting to an Aerial or Cable Television Network ...................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode.....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Viewing the Demonstration............................................................................
Choosing Your Language..............................................................................
5
7
9
9
10
10
11
12
13
13
N SETTING THE CHANNELS
I
I
I
I
I
I
Storing Channels Automatically.....................................................................
14
15
16
18
19
20
Sorting the Stored Channels .........................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Assigning Names to Channels ......................................................................
Fine Tuning Channel Reception....................................................................
N USING YOUR TELEVISION
Using the LNA (Low Noise Amplifier) feature (depending on the model)......
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
21
21
22
23
24
25
25
26
26
27
28
29
30
31
32
33
34
35
36
Changing the Picture Standard .....................................................................
Customizing the Picture Settings...................................................................
Selecting the Picture Size (depending on the model)....................................
Extra Picture Settings....................................................................................
Setting the Blue Screen.................................................................................
Using the Tilt Control Feature........................................................................
Freezing the Current Picture .........................................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Extra Sound Settings (depending on the model)...........................................
Selecting the Melody .....................................................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer.................................................................................
Switching the Television On and Off Automatically.......................................
Setting the Preferred Volume Level/Channel ................................................
Viewing an External Signal Source/Edit Name (depending on the model)....
Viewing the Picture In Picture (PIP) (depending on the model) ....................
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents (continued)
N USING THE TELETEXT FEATURE
I
I
I
I
I
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting a Page by Number.........................................................................
Using FLOF to Select a Page........................................................................
Storing Teletext Pages ..................................................................................
38
38
39
40
40
N ADDITIONAL INFORMATION ON CONNECTIONS
I
I
I
I
I
I
Connecting to the External Input/Outputs......................................................
Connecting to the Audio Output ....................................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Connecting to the DVD Player ......................................................................
Viewing Pictures From External Sources ......................................................
41
41
42
42
43
43
N RECOMMENDATIONS FOR USE
I
Automatic Degaussing to Remove Colour Patches.......................................
44
45
I
Troubleshooting: Before Contacting Service Personnel................................
Symbols
☛
➢
Press
Important
Note
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
View of Your Television (depending on the model)
The actual configuration on your TV may be different, depending on
your model.
➢
Control Panels
Front of the TV
1
2
3
5
6
7
4
1) Input Source Selection
2) Menu Display
5) Power On/Off
6) Standby Indicator
7) Remote Control Sensor
3) Volume Adjustment
4) Channel Selection
N
N
N
You can use the
mode.
C/P.
C/P.
buttons to switch on the TV when it is in standby
➢
➢
The
-
+ and
buttons have the same function as the …/†/œ/√
buttons on the remote control.
If the remote control no longer works or you have misplaced it, you can use the
controls on the panel of the TV.
If you turn the TV off by pressing the POWER button on the front of the TV, you will not
be able to turn the TV on using the POWER button on the remote control.
(For more detailed information, refer to page 10.)
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
View of Your Television (depending on the model) (continued)
Connection Panels
Side of the TV
Rear of the TV
S-Video Input
Video Input
Audio Input
(L, R)
SCART Audio/
Video Input/Output
Audio Output
Component Input
75Ω Coaxial Connector for Aerial/Cable Network
Available format for Component inputs; 480i, 480p, 576i, 576p,
1080i - 50Hz.
➢
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control (depending on the model)
TELEVISION STAND-BY
PICTURE SIZE SELECTION
SOUND MODE SELECTION
AUTOMATIC SWITCH-OFF
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT
CHANNEL SELECTION
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
VOLUME INCREASE
EXTERNAL INPUT SELECTION
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
PREVIOUS CHANNEL
INFORMATION DISPLAY
EXIT FROM ANY DISPLAY
MENU DISPLAY
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND MENU DISPLAY
TURBO SOUND
CHANGE CONFIRMATION
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
STILL PICTURE
DNIe DEMO
The performance of the remote control may be affected by bright light.
➢
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control (depending on the model) (continued)
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
TELETEXT SIZE SELECTION
TELETEXT SUB-PAGE
TELETEXT STORE
TELETEXT PAGE HOLD
SUB PICTURE(PIP)
NEXT CHANNEL
TELETEXT NEXT PAGE
TELETEXT MODE SELECTION
(LIST/FLOF)
TELETEXT PREVIOUS PAGE
PIP ON/OFF
TELETEXT REVEAL
SETUP MENU DISPLAY(W.LINK)
(depending on the model)
PROGRAMME
EXIT FROM ANY DISPLAY
SELECTION BY NAME
RETURN TO PREVIOUS MENU(W.LINK)
(depending on the model)
SUB PICTURE(PIP)
LOCATION SELECTION
SUB PICTURE(PIP) SIZE SELECTION
SUB PICTURE(PIP) PREVIOUS
CHANNEL
FASTEXT TOPIC SELECTION
SUB PICTURE(PIP)
SOURCE SELECTION
INTERCHANGE THE MAIN AND SUB
PICTURE (PIP)
W.LINK FUNCTION:(depending on the model)
- ROTATE
- ZOOM
- REWIND
- STOP
- PLAY/PAUSE
- FASR FORWARD
- W.LINK: TOGGLES BETWEEN WISE
LINK AND TV MODE.
English - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
N Purchase the television
N Find that the remote control is no longer operating
correctly
1
2
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
N
N
-
+
on the battery against
on the battery against
-
on the remote control
+ on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
N An outdoor aerial
N A cable television network
N A satellite network
1
2
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
Rear of the TV
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
or
For further details, refer to:
Cable Television
Network
N
“Storing Channels Automatically ” on page 14
N
“Storing Channels Manually” on page 16
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
2
3
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
➢
Press the “ ” button (On/Off) on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
Press the POWER ( ) button on the remote control to switch the
television on.
Result:
The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
14 or “Storing Channels Manually” on page 16.
➢
4
To switch your television off, press the “ ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
N Power consumption
N Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER (
button again.
)
You can also switch on by pressing the TV ( ), P
numeric buttons.
/
, or
➢
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
☛
example). Turn your television off by pressing the “
”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Becoming Familiar with the Remote Control
The remote control is used mainly to:
N Change channels and adjust the volume
N Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the previous
stored channel.
-
to
Used to display the corresponding channels.
-/--
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
PRE-CH
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
-
Used to decrease the
volume.
MUTE
MENU
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
➢
press the
or
button.
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
N Display a submenu
containing selections for
the current menu option
N Increase/decrease a
menu option value
-
-
Used to confirm your choice.
EXIT
TV
Used to exit from the menu
system and return to normal
viewing directly.
Used to switch the
television on when it is
in Standby mode.
Used to exit from the menu
system and return to normal
viewing directly
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play Feature
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
Plug & Play
Language
1
2
If the television is in Standby mode, press the POWER ( ) button
TV
on the remote control.
English
Srpski
Hrvatski
Român™
Magyar
Polski
êÛÒÒÍËÈ
Å˙΄‡ÒÍË
Türkçe
Norsk
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ÏÏËÓÈο
âe‰tina
Result:
The message Plug & Playis displayed. It flickers for
a little while and then Languagemenu is automatically
displayed.
Select the appropriate language by pressing the ▲ or ▼ button.
Press the MENU ( ) button to enter the language.
Dansk
Suomi
Move
Skip
Result:
The message Check antenna input.is displayed.
If any language is not selected on the Languagemenu, the
Languagemenu will disappear about 30 seconds later.
➢
Check antenna input.
3
4
Make sure that the antenna is connected to the TV.
Press the œ or √ button.
œ √ Move
Skip
Result:
The Auto Storemenu is displayed with Countryis
selected.
TV
Auto Store
Select your country by pressing the œ or √ button. To search the
channels, select Searchby pressing the ▲ or ▼ button, and then
press the œ or √ button. Press the MENU ( ) button to stop the
search.
Country
Search
œ
Belgium
: -/+
√
Result:
The Timemenu is displayed with Clockis selected.
Refer to “Storing Channels Automatically” on page 14.
➢
Move
œ √ Adjust
Skip
5
6
7
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button.
Refer to “Setting and Displaying the Current Time” on page
31.
➢
TV
Time
Clock
-- : --
: Off
Sleep Timer
On Timer
Off Timer
When you have finished, press the MENU ( ) button.
-- : -- Off
-- : -- Off
: 10
Result:
The message Enjoy your watching.is displayed,
and then the channel which has been stored will be
activated.
On Timer Volume
On Timer Channel
: P 1
Move
œ √ Adjust
Skip
If you want to reset this feature...
1
2
Press the MENU ( ) button.
Enjoy your watching.
Press the ▲ or ▼ button to select Setup, and then press the
œ or √ button.
Result:
The Plug & Playis selected.
TV
Setup
3
Press the œ or √ button again.
Result: This feature starts with the message Plug & Play
Plug & Play
Language
Time
Blue Screen
Melody
Demonstration
√
√
: English
is displayed.
: Off
: 0n
When you wish to exit from the Plug & Play, press
➢
the EXIT (
) button on the remote control.
√
Move
œ √ Enter
Return
English - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Demonstration
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setupgroup are
displayed.
3
4
5
Press the œ or √ button.
Press the ▲ or ▼ button to select Demonstration.
Press the œ or √ button.
TV
Setup
Plug & Play
√
√
Language
Time
: English
Result:
Each of the menu options is displayed in turn.
Blue Screen
Melody
Demonstration
: Off
: 0n
When you wish to exit from the demonstration, press the
➢
EXIT (
) button on the remote control.
√
Move
œ √ Enter
Return
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
TV
Setup
Plug & Play
√
√
√
Language
Time
Blue Screen
Melody
œ
English
1
2
Press the MENU ( ) button.
: Off
: 0n
Result:
The main menu is displayed.
Demonstration
√
Press the ▲ or ▼ button to select Setup.
Move
œ √ Enter
Return
Result:
The options available in the Setupgroup are
displayed.
TV
Language
Srpski
3
4
5
6
Press the œ or √ button.
English
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ÏÏËÓÈο
âe‰tina
Hrvatski
Român™
Magyar
Polski
êÛÒÒÍËÈ
Å˙΄‡ÒÍË
Türkçe
Norsk
Press the ▲ or ▼ button to select Language.
Press the œ or √ button.
Dansk
Suomi
Select the appropriate language by pressing the ▲ or ▼ button
repeatedly.
Move
Return
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
Name
1
2
Press the MENU ( ) button.
†
More
Result:
The main menu is displayed.
Move
œ √ Enter
Return
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channelgroup are
displayed.
Auto Store
Country
Search
œ
Belgium
: -/+
√
3
4
Press the œ or √ button.
Result:
The Auto Storeis selected.
Press the œ or √ button again.
Result:
The options available in the Auto Storegroup are
displayed with Countryis selected.
Move
œ √ Adjust
Return
5
Select your country by pressing the œ or √ button. The countries
are displayed in the following order:
Auto Store
Belgium
Sweden
Eastren Europe
-
France
-
Germany
-
Italy
-
Nederlands
-
-
Spain
-
Country
Search
:
Belgium
-/+
-
Switzerland
-
Unitde Kingdom- Others
œ
√
6
7
Press the ▲ or ▼ button to select Search.
Press the œ or √ button to start the search.
Move
œ √ Search
Return
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
➢
To stop the search before it has finished, press the MENU
) button.
(
P 1 C-- -----
106 MHz
8
When searching and storing are complete, the Sortmenu is
displayed.
7 %
◆
To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 15.
Return
TV
Sort
P 1 -----
: P-- -----
: ?
◆
To exit from the channel store function without sorting the
channels, press the MENU ( ) button repeatedly until the
menus disappear.
From
To
Store
œ
√
9
When the channels have been stored, you can:
◆
◆
◆
◆
◆
Sort them in the order required (refer to page 15)
Clear a channel (refer to page 18)
Assign a name to the stored channels (refer to page 19)
Fine tune channel reception if necessary (refer to page 20)
Activate the Digital Noise Reduction feature (refer to page 24)
Move
œ √ Adjust
Return
English - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
TV
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Name
†
More
Press the ▲ or ▼ button to select Channel.
Move
œ √ Enter
Return
Result:
The options available in the Channelgroup are
displayed.
Sort
P 1 -----
: P-- -----
: ?
3
4
5
Press the œ or √ button.
From
To
Store
œ
√
Press the ▲ or ▼ button to select Sort.
Press the œ or √ button.
Result:
The options available in the Sortgroup are displayed
with Fromis selected.
Move
œ √ Adjust
Return
6
7
Select the channel number that you wish to change by pressing
the œ or √ button repeatedly.
Sort
Press the ▲ or ▼ button to select To. Select the new channel
number which you wish to identify by pressing the œ or √ button
repeatedly.
From
To
: P 1 -----
œ
P 3 -----
√
Store
: ?
You can also select the channel number directly by pressing
the numeric buttons (0~9).
➢
8
9
Press the ▲ or ▼ button to select Store. Select OK to confirm the
Move
œ √ Adjust
Return
exchange of channel numbers by pressing the œ or √ button.
Result:
The selected channel is exchanged with the one
previously stored to the chosen number.
Sort
For all the channels to move to the required channel numbers,
repeat steps 6 to 8 after selecting the Fromby pressing the ▲ or ▼
button.
From
To
Store
: P 3 -----
: P 1 -----
OK
œ
√
Move
œ √ Adjust
Return
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually
You can store up to 100 television channels, including those
received via cable networks.
TV
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
When storing channels manually, you can choose:
√
√
√
√
√
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
Name
you wish to identify
†
More
Move
œ √ Enter
Return
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Manual Store
Press the ▲ or ▼ button to select Channel.
Programme
Colour System
Sound System
Search
œ
P 1-----
: AUTO
: BG
: 0MHz
: C--
: ?
√
Result:
The options available in the Channelgroup are
displayed.
Channel
Store
3
4
5
Press the œ or √ button.
Move
œ √ Adjust
Return
Press the ▲ or ▼ button to select Manual Store.
Press the œ or √ button.
Manual Store
Result:
The options available in the Manual Storegroup are
displayed with Programmeis selected.
Programme
: P 1-----
AUTO
Colour System
Sound System
Search
œ
√
6
7
To assign a programme number to a channel, press the œ or √
button.
: BG
: 0MHz
: C--
: ?
Channel
Store
Press the ▲ or ▼ button to select Colour System. Indicate the
broadcasting standard required by pressing the œ or √ button
repeatedly.
Move
œ √ Adjust
Return
Result:
The colour standards are displayed in the following
order:
Manual Store
AUTO
-
PAL
-
SECAM
-
NT4.43
Programme
: P 1-----
: AUTO
BG
8
Press the ▲ or ▼ button to select Sound System. Select the
sound standard required by pressing the œ or √ button repeatedly.
Colour System
Sound System
Search
œ
√
: 0MHz
: C--
: ?
Result:
The sound standards are displayed in the following
order:
Channel
Store
BG
-
DK
-
I
-
L
Move
œ √ Adjust
Return
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually (continued)
9
If you know the number of the channel to be stored, see the
following steps.
TV
TV
TV
Manual Store
Programme
: P 1-----
: AUTO
: BG
◆
◆
◆
Press the ▲ or ▼ button to select Channel.
Colour System
Sound System
Search
Press the √ button.
: 0MHz
Press the ▲ or ▼ button to select C(Air channel) or S(Cable
channel).
Channel
œ
C 1
√
Store
: ?
◆
◆
Press the √ button.
Adjust
œ √ Move
Return
Press the ▲ or ▼ button to select indicate the required
number.
Manual Store
You can also select the channel number directly by
pressing the numeric buttons (0~9).
➢
Programme
Colour System
Sound System
Search
: P 1-----
: AUTO
If no sound or abnormal sound, re-select the sound standard
required.
➢
: BG
œ
46MHz
√
Channel
: C 1
: ?
10 If you do not know the channel numbers, select Searchby
pressing the ▲ or ▼ button. Press the œ or √ button to start the
search.
Store
Move
œ √ Search
Return
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
Manual Store
Programme
: P 1-----
11 To store the channel and associated programme number, select
Storeby pressing the ▲ or ▼ button. Press the œ or √ button to
select OK.
Colour System
Sound System
Search
Channel
Store
: AUTO
: BG
: 46MHz
: C 1
12 Repeat Steps 9 to 11 for each channel to be stored.
œ
OK
√
Move
œ √ Adjust
Return
Channel mode
☛
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Skipping Unwanted Channels
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
All of the channels that you do not specifically choose to skip are
displayed during scanning.
Name
†
More
1
2
Press the MENU ( ) button.
Move
œ √ Enter
Return
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Add/Delete
Result:
The options available in the Channelgroup are
displayed.
P 1
P 2
P 3
P 4
œ
Added
√
: Added
: Added
: Added
3
4
5
Press the œ or √ button.
Press the ▲ or ▼ button to select Add/Delete.
Press the œ or √ button.
Move
œ √ Adjust
Return
Result:
The stored channels are displayed.
Add/Delete
6
7
Press the ▲ or ▼ button to select the channel to add or erase.
If necessary, select Addedor Deletedby pressing the œ or √
button.
P 1
P 2
P 3
P 4
œ
Deleted
√
: Added
: Added
: Added
Repeat Step 6 for each channel to be added or erased.
Move
œ √ Adjust
Return
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Name
†
More
Press the ▲ or ▼ button to select Channel.
Move
œ √ Enter
Return
Result:
The options available in the Channelgroup are
displayed.
Name
-----
: -----
: -----
: -----
3
4
5
Press the œ or √ button.
P 1
P 2
P 3
P 4
œ
√
Press the ▲ or ▼ button to select Name.
Press the œ or √ button.
Result:
The current channels are displayed.
Move
œ √ Adjust
Return
6
If necessary, select the channel to be assigned to a new name by
pressing the ▲ or ▼ button.
7
8
Press the œ or √ button.
Name
P 1
P 2
P 3
P 4
œ
A
√
Press the ▲ or ▼ button to select a letter (A~Z), a number (0~9) or
: -----
: -----
: -----
a symbol (-, space). Move on the previous or next letter by
pressing the œ or √ button.
9
Repeat Steps
name.
6
to
8
for each channel to be assigned to a new
Adjust
œ √ Move
Return
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
TV
Channel
…
More
Fine Tune
LNA
√
: Off
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Move
œ √ Enter
Return
Result:
The options available in the Channelgroup are
displayed.
3
4
5
6
Press the œ or √ button.
Fine Tune
Reset
P 1
1
Press the ▲ or ▼ button to select Fine Tune.
Press the œ or √ button.
Move
œ √ Adjust
Save
Return
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button.
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
7
8
To store the fine tuning setting in the TV’s memory, press the
ENTER ( ) button.
Result:
Channel indicator turns into Red.
To erase adjusted picture or sound, select Reset by pressing the
▲ or ▼ button. Press the ENTER ( ) button.
Result:
Channel indicator returns to its original colour.
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LNA (Low Noise Amplifier) feature (depending on the model)
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise. This feature is working only weak signal condition,
and that is memorized on current channel, additional.
TV
Channel
…
More
Fine Tune
LNA
√
√
œ
On
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Move
œ √ Adjust
Return
Press the ▲ or ▼ button to select Channel.
Result: The options available in the Channelgroup are
displayed.
3
4
5
Press the œ or √ button.
Press the ▲ or ▼ button to select LNA.
To activate this feature, select On by pressing the œ or √ button.
Setting the LNA option to “On” may produce worse picture
➢
quality due to the current channel’s signal condition.
Hence, apply LNA On/Off selectively according to the
picture quality that is currently displayed.
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
TV
Picture
Dynamic
Mode
œ
√
Size
: Auto Wide
: Natural
: On
Scan Mode
Digital NR
DNIe Demo
1
2
Press the MENU ( ) button.
: Off
Result:
The main menu is displayed.
†
More
Press the ▲ or ▼ button to select Picture.
Move
œ √ Adjust
Return
Result:
The options available in the Picturegroup are
displayed.
TV
Mode
3
4
Press the œ or √ button.
Mode
œ
Dynamic
: 70
: 50
: 50
: 50
√
Contrast
Brightness
Sharpness
Colour
Result:
The Modeis selected.
Select the required picture mode by pressing the œ or √ button
repeatedly.
†
More
Result:
The following picture mode are available:
Dynamic Standard Movie Custom
Move
œ √ Adjust
Return
-
-
-
You can also set these options simply by pressing the
➢
P.MODE
(
; Picture Mode) button.
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Picture Settings
Your television has several settings which allow you to control the
picture quality.
TV
TV
TV
Picture
Dynamic
: Auto Wide
: Natural
: On
Mode
Size
Scan Mode
Digital NR
DNIe Demo
œ
√
1
2
Press the MENU ( ) button.
Result: The main menu is displayed.
: Off
†
More
Press the ▲ or ▼ button to select Picture.
Result: The options available in the Picturegroup are
Move
œ √ Adjust
Return
displayed.
3
4
Press the œ or √ button.
Mode
Standard
Result:
The Modeis selected.
Mode
œ
√
Contrast
Brightness
Sharpness
Colour
: 50
: 50
: 50
: 45
Select the required picture mode by pressing the œ or √ button
repeatedly.
Result:
The following picture mode are available:
Dynamic Standard Movie Custom
†
More
-
-
-
Move
œ √ Adjust
Return
5
Press the ▲ or ▼ button to select the option (Contrast,
Brightness, Sharpness, Colour, or Tint-NTSC only) to be
adjusted. Press the œ or √ button.
Mode
Mode
: Standard
50
: 50
: 50
: 45
Result:
The horizontal bar is displayed. Press the œ or √
button until you reach the optimal setting.
Contrast
Brightness
Sharpness
Colour
œ
√
6
7
Press the MENU ( ) button.
†
More
Result:
The available options are displayed again.
Move
œ √ Adjust
Return
50
Press the ▲ or ▼ button to select Colour Tone. Select the
required option by pressing the œ or √ button repeatdly.
Contrast
Result:
The following colour tones are available:
Warm2 Warm1 Normal Cool1 Cool2
-
-
-
-
8
To return to the factory defaults, select Resetby pressing the ▲ or
▼ button. Press the œ or √ button.
TV
Mode
The reset function is set for each mode (Dynamic, Standard,
…
More
Movie, or Custom).
Colour Tone
Reset
œ
Normal
√
√
Result:
The previously adjusted settings will be reset to the
factory defaults.
Move
œ √ Adjust
Return
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 44.)
➢
TV
Mode
…
More
Colour Tone
Reset
:Normal
√
Move
œ √ Adjust
Return
English - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Picture Size (depending on the model)
You can select the picture size which best corresponds to your
viewing requirements simply by pressing the “P.SIZE
Depending on the model, the following picture sizes are available:
(
)” button.
TV
Picture
: Dynamic
œ Auto Wide
: Natural
: On
Mode
Size
Scan Mode
Digital NR
DNIe Demo
◆ Auto Wide, 16:9, Panorama, Zoom1, Zoom2, 4:3
√
Lifting is available in the Zoom1or Zoom2mode by
pressing the ▲ or ▼ button.
➢
: Off
†
More
1
2
Press the MENU ( ) button.
Move
œ √ Adjust
Return
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picturegroup are
displayed.
3
4
5
Press the œ or √ button.
Press the ▲ or ▼ button to select Size.
Press the œ or √ button to select the picture size.
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra Picture Settings
◆ Scan Mode
You will normally find that scan mode is best set to Natural
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode. Natural, Digital, and
Progressivemodes are available.
TV
TV
TV
Picture
Mode
Size
Scan Mode
Digital NR
DNIe Demo
: Dynamic
: Auto Wide
œ Natural
: On
√
: Off
†
More
◆ Digital NR
Move
œ √ Adjust
Return
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
Picture
: Dynamic
: Auto Wide
: Natural
œ On
Mode
Size
Scan Mode
Digital NR
DNIe Demo
◆ DNIe Demo
This TV includes the DNIe function so as to provide a high
visual quality.
If you set DNIe Demoto On, you can view an applied DNIe
and a normal picture on the screen, for demonstration
purposes. Using this function, you can view the difference in
the visual quality.
√
: Off
†
More
Move
œ √ Adjust
Return
Even if you set DNIe Demoto off, the DNIe function is still
activated.
Picture
: Dynamic
: Auto Wide
: Natural
: On
Mode
Size
Scan Mode
Digital NR
DNIe Demo
DNIe (Digital Natural Image engine
)
➢
œ On
√
1
2
Press the MENU ( ) button.
†
More
Result:
The main menu is displayed.
Move
œ √ Adjust
Return
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picturegroup are
displayed.
3
4
Press the œ or √ button.
Select the required option (Scan Mode, Digital NR, or DNIe
Demo) by pressing the ▲ or ▼ button.
5
Press the œ or √ button to change the setting.
◆
◆
◆
Scan Mode : Natural, Digital, or Progressive
Digital NR : Offor On
DNIe Demo : Offor On
You can also set these options simply by pressing the DNIe
button.
➢
English - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
TV
Setup
Plug & Play
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
√
Language
Time
: English
√
√
Blue Screen
Melody
Demonstration
œ On
: On
1
2
Press the MENU ( ) button.
√
Result:
The main menu is displayed.
Move
œ √ Adjust
Return
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setupgroup are
displayed.
3
4
5
Press the œ or √ button.
Press the ▲ or ▼ button to select Blue Screen.
To activate this feature, select On by pressing the œ or √ button.
Using the Tilt Control Feature
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
TV
Picture
…
More
Tilt
PIP
œ 0
√
√
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picturegroup are
displayed.
Move
œ √ Adjust
Return
3
4
5
Press the œ or √ button.
Press the ▲ or ▼ button to select Tilt.
Press the œ or √ button to reach the required setting (-7 to 7).
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL ” button.
(
)
To return to normal viewing, press this button again.
➢
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
TV
Sound
Mode
Equalizer
œ
Custom
√
√
1
2
Press the MENU ( ) button.
Auto Volume
Dolby Virtual
Turbo Sound
: Off
: Off
: Off
: Off
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Pseudo Stereo
Result:
The options available in the Soundgroup are
displayed.
Move
œ √ Adjust
Return
3
4
Press the œ or √ button.
Result:
The Modeis selected.
Select the required sound effect by pressing the œ or √ button
repeatedly.
Result:
The following sound effects are available:
Custom Standard Music Movie Speech
-
-
-
-
You can also set these options simply by pressing the
➢
S.MODE
(
;
Sound Mode) button.
English - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
TV
Sound
: Custom
: Off
1
2
Press the MENU ( ) button.
Mode
Equalizer
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
√
Result:
The main menu is displayed.
: Off
: Off
: Off
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Soundgroup are
displayed.
Move
œ √ Enter
Return
3
4
5
Press the œ or √ button.
TV
Equalizer
Press the ▲ or ▼ button to select Equalizer.
Press the œ or √ button.
R
L
Result:
The options available in the Equalizergroup are
displayed.
You can also display this group simply by pressing the
S.MENU (Sound Menu) button.
➢
Adjust
œ √ Move
Return
6
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button to reach the required setting.
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
➢
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra Sound Settings (depending on the model)
◆ Auto Volume
Each broadcasting station has its own signal conditions, and
TV
TV
TV
TV
Sound
: Custom
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Mode
Equalizer
√
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
œ
On
√
: Off
: Off
: Off
Move
œ √ Adjust
Return
◆ Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channel simply by pressing the
TURBO button.
Sound
Mode
Equalizer
: Custom
√
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
: Off
On
: Off
: Off
œ
√
◆ Pseudo Stereo / Dolby Virtual
Pseudo stereofeature converts a monaural sound signal
into two identical left and right channels.
Move
œ √ Adjust
Return
Once the Pseudo Stereoor Dolby Virtualis set to On
or Off, these settings apply to the sound effects such as
Standard, Music, Movie, and Speech.
Sound
Mode
Equalizer
: Custom
√
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
: Off
: Off
œ
On
√
(
)
1
2
Press the MENU
button.
: Off
Result: The main menu is displayed.
Move
œ √ Adjust
Return
Press the ▲ or ▼ button to select Sound.
Result: The options available in the Soundgroup are
Sound
displayed.
Mode
: Custom
Equalizer
√
3
4
Press the œ or √ button.
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
: Off
: Off
: Off
Select the required option (Auto Volume, Dolby Virtual,
Turbo Sound, or Pseudo Stereo) by pressing the ▲ or ▼
button.
œ
On
√
Move
œ √ Adjust
Return
5
To activate each feature, select On by pressing the œ or √ button.
Manufactured under license from
Dolby Laboratories.
➢
“Dolby” and the double-D symbol
are trademarks of Dolby
Laboratories.
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Melody
You can hear clear melody sound when the television is powered on
or off.
TV
Setup
Plug & Play
√
√
1
2
Press the MENU ( ) button.
Language
Time
Blue Screen
Melody
: English
Result:
The main menu is displayed.
: Off
œ On
√
√
Press the ▲ or ▼ button to select Setup.
Demonstration
Result:
The options available in the Setupgroup are
displayed.
Move
œ √ Adjust
Return
3
4
5
Press the œ or √ button.
Press the ▲ or ▼ button to select Melody.
To activate this feature, select On by pressing the œ or √ button.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I ” or “STEREO”, depending on
the current transmission.
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
MONO (Normal use)
Regular +
NICAM Mono
MONO
NICAM
↔
MONO
(Normal)
NICAM
Stereo
STEREO ↔ MONO
NICAM (Normal)
NICAM Stereo
DUAL-
I
→ DUAL-II → MONO
NICAM
NICAM (Normal)
NICAM Dual-I/II
Regular broadcast
(Standard audio)
MONO (Normal use)
A2
Stereo
Bilingual or Dual-I/II
DUAL- ↔ DUAL-II
I
STEREO ↔ MONO
(Forced mono)
Stereo
◆ If the receiving conditions deteriorate, listening will be
➢
easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting and Displaying the Current Time
You can set the television’s clock so that the current time is displayed
by pressing the “INFO
you wish to use the automatic on or off timers.
(
)” button. You must also set the time if
TV
TV
TV
Setup
Plug & Play
√
√
Language
Time
: English
When pressing the “ ” button (On/Off) on the front of
the television, the clock setting will be reset.
➢
Blue Screen
Melody
Demonstration
: Off
: On
√
1
2
Press the MENU ( ) button.
Move
œ √ Enter
Return
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Time
Result:
The options available in the Setupgroup are
displayed.
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
-- : --
: Off
-- : -- Off
-- : -- Off
: 10
3
4
5
Press the œ or √ button.
On Timer Channel
: P 1
Press the ▲ or ▼ button to select Time.
Press the œ or √ button.
Move
œ √ Adjust
Return
Result:
The Clockis selected.
Time
6
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button.
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
11 : 00
: Off
-- : -- Off
-- : -- Off
: 10
7
8
When you have finished, press the EXIT (
) button to exit.
On Timer Channel
: P 1
Press the INFO ( ) button to display the channel information and
the current time.
Adjust
œ √ Move
Return
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sleep Timer
You can set your TV to automatically turn off after a preset
interval.
TV
Setup
Plug & Play
√
√
1
2
Press the MENU ( ) button.
Result: The main menu is displayed.
Language
Time
: English
Blue Screen
Melody
Demonstration
: Off
: On
Press the ▲ or ▼ button to select Setup.
Result: The options available in the Setupgroup are
√
Move
œ √ Enter
Return
displayed.
3
4
5
Press the œ or √ button.
TV
Time
11 : 00
Clock
Press the ▲ or ▼ button to select Time.
Press the œ or √ button.
Sleep Timer
Timer
œ 30min √
-- : -- Off
-- : -- Off
10
On Timer Channel : P 1
Off Timer
On Timer Volume
:
Result:
The Clockis selected.
6
7
Press the ▲ or ▼ button to select Sleep Timer.
Move
œ √ Adjust
Return
Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for
staying on by pressing the œ or √ button.
You can select a time period of between 30 and 180 minutes
after the television automatically switches to Standby mode
➢
by pressing the SLEEP ( ) button.
English - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the Television On and Off Automatically
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
TV
TV
TV
Setup
Plug & Play
choice at the time you select
√
√
Language
Time
: English
◆ Switch off automatically at the time you select
Blue Screen
Melody
Demonstration
: Off
: On
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the page
31). If you have not yet set the clock, the message Set
the clock firstis displayed.
➢
√
Move
œ √ Enter
Return
Time
1
2
Press the MENU ( ) button.
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
11 : 00
:30min
Result:
The main menu is displayed.
06 : 00 On
-- : -- Off
: 10
Press the ▲ or ▼ button to select Setup.
Result: The options available in the Setupgroup are
On Timer Channel
: P 1
displayed.
Adjust
œ √ Move
Return
3
4
5
Press the œ or √ button.
Press the ▲ or ▼ button to select Time.
Press the œ or √ button.
Time
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
11 : 00
:30min
06 : 00 On
23 : 00 On
: 10
Result:
The Clockis selected.
6
Press the ▲ or ▼ button to select On Timer. Set the time at which
you wish the television to be switched on automatically.
On Timer Channel
: P 1
Adjust
œ √ Move
Return
◆
Press the œ or √ button to move to the hour or minute.
Set these by pressing the ▲ or ▼ button.
◆
Press the œ or √ button to move Offand then, press the ▲ or
▼ button to select On.
7
Press the ▲ or ▼ button to select Off Timer. In the same above,
set the time at which you wish the television to be switched off
automatically.
Auto Power Off
➢
When you set the timer “On”, the television will eventually
turn off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in
timer “On” mode and prevents overheating or leakages,
which may occur if a TV is on for too long (on holiday, for
example).
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Preferred Volume Level/Channel
The preferred volume and channel can be set for when the timer
automatically turns on the TV.
TV
TV
TV
Setup
Plug & Play
√
√
1
2
Press the MENU ( ) button.
Language
Time
: English
Result:
The main menu is displayed.
Blue Screen
Melody
Demonstration
: Off
: On
Press the ▲ or ▼ button to select Setup.
√
Result:
The options available in the Setupgroup are
displayed.
Move
œ √ Enter
Return
3
4
5
Press the œ or √ button.
Time
Clock
11 : 00
:30min
Press the ▲ or ▼ button to select Time
Press the œ or √ button.
Sleep Timer
On Timer
06 : 00 On
23 : 00 On
Off Timer
On Timer Volume
On Timer Channel
œ 10
: P 1
√
Result:
The Clockis selected.
6
7
8
9
Press the ▲ or ▼ button to select On Timer Volume.
Press the œ or √ button to adjust volume level.
Press the ▲ or ▼ button to select On Timer Channel.
Press the œ or √ button to select the channel.
Move
œ √ Adjust
Return
Time
Clock
11 : 00
:30min
Sleep Timer
On Timer
06 : 00 On
23 : 00 On
: 10
Off Timer
On Timer Volume
On Timer Channel
œ P 1
√
Move
œ √ Adjust
Return
English - 34
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing an External Signal Source/Edit Name (depending on the model)
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
TV
TV
TV
TV
TV
Input
: TV
Source List
Edit Name
√
√
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Press the œ or √ button to select Input.
Result: The options available in the Inputgroup are
Move
œ √ Enter
Return
displayed.
Source List
TV
EXT1
EXT2
3
4
Press the œ or √ button again to select Source List.
: ------
: ------
EXT3/S-Video : ------
Component : ------
Result:
The options available in the Source Listgroup are
displayed.
Press the ▲ or ▼ button to select signal source, then press the
œ or √ button.
Move
œ √ Enter
Return
When you connect equipment to the TV, you can choose
➢
between the following sets of jacks : EXT1, EXT2, or
Componenton the TV’s rear panel, and EXT3/S-Videoon
the TV’s side panel.
Input
: TV
Source List
Edit Name
√
√
You can also set these options simply by pressing the
➢
SOURCE (
)
button. If you change the external
source while viewing, pictures might take a short period of
time to be switched.
Move
œ √ Enter
Return
Edit Name
Edit Name
EXT1
EXT2
EXT3
S-Video
Component
œ
------
√
(
)
1
Press the MENU
button.
: ------
: ------
: ------
: ------
Result: The main menu is displayed.
2
Press the œ or √ button to select Input.
Result: The options available in the Inputgroup are
displayed.
Move
œ √ Adjust
Return
3
4
Press the ▲ or ▼ button to select Edit Name. Press the œ or √
Edit Name
DVD
button.
EXT1
EXT2
EXT3
S-Video
Component
œ
√
Result:
The options available in the Edit Namegroup are
displayed.
: ------
: ------
: ------
: ------
Press the ▲ or ▼ button to select external device :
EXT1 EXT2 EXT3 S-Video Component
-
-
-
-
Move
œ √ Adjust
Return
5
6
7
Press the œ or √ button.
Select the name by pressing the œ or √ button.
Set other signal sources (EXT1, EXT2, EXT3, S-Video, Component)
using the same method as listed above.
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) (depending on the model)
Not available in Component mode.
➢
You can display a sub picture within the main picture of TV program
or external A/V devices such as VCR. In this way you can watch TV
program or monitor the video input from any connected devices
TV
TV
TV
TV
Picture
…
More
while watching TV or other video input.
Tilt
PIP
: 0
√
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Move
œ √ Enter
Return
Press the ▲ or ▼ button to select Picture.
Result: The options available in the Picturegroup are
PIP
displayed.
PIP
œ
Off
√
3
4
5
Press the œ or √ button.
Press the ▲ or ▼ button to select PIP. Press the œ or √ button.
Press the œ or √ button to select On.
Result:
The options available in the PIPgroup are displayed.
Move
œ √ Adjust
Return
You can also activate the PIP simply by pressing the PIP
button. To deactivate, press it again.
➢
PIP
PIP
Source
Swap
Size
Position
Programme
: On
œ TV
6
7
Press the ▲ or ▼ button to select Source.
√
√
Press the œ or √ button to select a source of sub picture.
: Large
Result:
The sources are displayed in the following order:
TV EXT1 EXT2 EXT3/S-Video
:
: P 1
-
-
-
Move
œ √ Adjust
Return
In some PIP TV models, the PIP function will not operate if
the same source to the main picture is selected for the sub-
picture. When a TV channel is viewed on the main picture,
PIP is not available for TV channels. If a TV source is
selected, the message "Not available" will appear on the
screen. The PIP picture can be viewed only when a source
different from the main picture's is selected in the PIP
window.
➢
➢
PIP
: On
PIP
Source
Swap
Size
Position
Programme
: TV
√
: Large
:
You can also set these options simply by pressing the
SOURCE button.
: P 1
Move
œ √ Enter
Return
8
9
Press the ▲ or ▼ button to select Swap.
Press the œ or √ button.
Result:
The main picture and the sub picture are
interchanged.
You can also interchange the main picture and the sub
➢
(
)
picture simply by pressing the SWAP
button.
English - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) (depending on the model) (continued)
10 Press the ▲ or ▼ button to select Size.
TV
PIP
11 Select a size of sub picture by pressing the œ or √ button.
PIP
Source
Swap
Size
Position
Programme
: On
: TV
Result:
The sizes are displayed in the following order:
Large Small Double Window 16 PIP
√
√
-
-
-
œ Large
:
◆
16 PIP : You can view up to 16 memorized channels
: P 1
➢
on the sub picture spontaneously.
Move
œ √ Adjust
Return
◆
◆
When the Sizeis set to 16 PIP, you can’t select Swap,
Position, and Programme.
When the Sizeis set to Double Window, you can’t
select Position.
You can select these options simply by pressing the SIZE
button.
➢
12 Press the ▲ or ▼ button to select Position.
TV
PIP
: On
13 Press the œ or √ button.
PIP
Source
Swap
Size
Result:
The positions available are displayed.
- - -
: TV
√
√
: Large
You can select these options simply by pressing the
(Position) button.
Position
Programme
œ
➢
: P 1
Move
œ √ Adjust
Return
14 Press the † or … button to select Programme. You can select the
channel that you want to view through sub picture by pressing the
œ or √ button.
TV
PIP
: On
PIP
Source
Swap
Size
◆
◆
When the Sourceis set to TV, you can select the
➢
: TV
channel of sub picture.
√
You can select the channel of the sub picture simply by
: Large
pressing the † or … button.
Position
Programme
:
œ P 1
√
Easy functions of remote control
Move
œ √ Adjust
Return
Buttons
PIP
Feature
Used to activate or deactivate the PIP function directly.
Used to interchange the main picture and the sub picture.
SWAP
When the main picture is in the Video mode and the
➢
sub picture is in the TV mode, you might not hear the
(
)
sound of main picture when pressing the SWAP
button after changing the sub picture channel. At this
time, reselect the channel of main picture.
SOURCE
SIZE
Used to assign a source of sub picture (TV, EXT1, EXT2,
or EXT3/S-Video).
Used to select a size of sub picture (Large, Small,
Double Window, or 16 PIP).
(Position) Used to move the sub picture counterclockwise.
Used to select the channel of sub picture.
P
/
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
N
N
N
N
Television programme times
News bulletins and weather forecasts
Sports results
Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
B
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
It can be diffrent from depending on TTX source.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
➢
➢
N Entering the page number
N Selecting a title in a list
N Selecting a coloured heading (FASTEXT system)
Displaying the Teletext Information
You can display Teletext information at any time on your television.
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
☛
N Information may be missing
N Some pages may not be displayed
1
2
Select the channel providing the Teletext service using the
button.
or
Press the TTX/MIX (
Result: The contents page is displayed. It can be redisplayed
at any time by pressing the (index) button.
) button to activate the teletext mode.
3
4
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX ( ) button again.
Press the TV ( ) button to exit from the teletext display.
English - 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Page by Number
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
The current page counter is incremented and the
page is then displayed.
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the
resume.
(hold). Press the
(hold) again to
Using the various display options:
To display...
Press the...
N
Both teletext information and
the normal broadcast
TTX/MIX (
twice
)
N
Hidden text
(reveal)
(answers to quiz games, for example)
N
N
The normal screen
(reveal) again
A secondary page,
(sub-page)
by entering its 4-digit number
N
N
The next page
(page up)
The previous page
(page down)
N
Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
N
Normal screen
• Three times
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using FLOF to Select a Page
The various topics included in the teletext pages are colour-coded,
and can be selected by pressing the coloured buttons on the remote
control.
1
2
Display the teletext contents page by pressing the TTX/MIX
) button.
(
Press the coloured button corresponding to the topic that you
wish to select;the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
4
To display the previous or next page, press the corresponding
coloured button.
To display the subpage, see the following steps.
N
Press the
Result:
(sub-page) button.
The available subpages appear.
N
Select the required sub-page. Sub-pages can be scrolled by
using the TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
button.
Result:
Four 3-digit numbers are displayed in different
colours.
The button is used to switch between the LIST and
FLOF (or FASTEXT) modes.
➢
2
Press the coloured button corresponding to the page that will be
replaced.
3
4
Enter the new page number using the numeric buttons.
Repeat steps
2
and
3
for each page to be stored, using a
different coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
English - 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the External Input/Outputs
➢
“EXT 1 (RGB)” is used for the equipment with an RGB
output, such as video game devices or video disc players.
Rear of the TV
x
VCR
DVD
y
z
or
Decoder /
x
y
This end can be fitted with:
Video game device
N
A SCART connector
N
Three RCA connectors (Video + Audio-L and R)
If you have a second VCR and wish to copy cassettes tape, connect the
source VCR to EXT 1 (RGB) and the target VCR to EXT 2 (A/V) so that
you can redirect the signal from EXT 1 (RGB) to EXT 2 (A/V)
“
”
“
”
Video disc player
Satellite receiver
“
”
“
”.
z
➃
If you have a decoder, connect the decoder to the VCR and the VCR to the
television.
When you wish to record a programme, connect the receiver to
and the VCR to EXT 2 (A/V) so that you can redirect the signal from
(RGB) to EXT 2 (A/V)
“
EXT 1 (RGB)
”
“
”
“EXT 1
➃
”
“
”.
Connecting to the Audio Output
➢
The AUDIO OUT (RCA) connectors are used for equipment, such as an audio system (to take full
advantage of the Surround sound effect).
Rear of the TV
Audio system
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the RCA Input
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Side of the TV
Camcorder
Video game device
Video disc player
Connecting to the S-Video Input
➢
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Side of the TV
x
Camcorder
and
VCR
x
To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
Whenever you connect an audio or video system to your
☛
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
When both the AV IN 3 Video IN and S-VIDEO are connected
to external equipment, the S-VIDEO receives priority.
➢
English - 42
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the DVD Player
Rear of the TV
DVD
N
N
Connect the RCA Cable to “L” and “R” on the rear of your television and the other end to “Audio Out”
connector of the DVD player. Connect the RCA Cable to “Y”, “PB”, and “PR” on the rear of your television
and the other end to the “Component Video Out (Y, PB, PR)” connectors of the DVD player.
Only black signal is output from a monitor in Component mode.
Available format for Component inputs; 480i, 480p, 576i, 576p,
1080i - 50Hz.
➢
Viewing Pictures From External Sources
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1
2
Check that all the necessary connections have been made.
(
)
Switch your television on, then press the SOURCE
button
repeatedly.
Result:
The input sources are displayed in the following
order:
EXT1
-
EXT2
-
EXT3/S-Video
-
Component
Depending on the source selected, the pictures may appear
automatically.
➢
To watch television programmes again, press the TV (
button and select the number of the channel required.
)
➢
English - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Degaussing to Remove Colour Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and colour patches appear on the screen, you must:
N Switch the television off by pressing the “ ” (On/Off) button on the front panel
N Unplug the television from the wall socket
N Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER( )” button on the remote control.
☛
If your television will be left unattended, press the “ ” (On/Off) button to turn your
television off.
English - 44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
N
N
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the “ ” button (On/Off) and the
POWER ( ) button.
N
N
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
N
N
Check the volume.
Check whether the MUTE ( ) button on the remote control has
been pressed.
No picture or black and white picture
Sound and picture interference
N
N
Adjust the colour settings.
Check that the broadcast system selected is correct.
N
N
N
Try to identify the electrical appliance that is affecting the television,
then move it further away.
Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
N
N
N
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
English - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
English - 46
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
English - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
AA68-03554A-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|