DVD OYNATICI
DVD Player
DVD-P147
DVD-P247A
MANUFACTURER : SAMSUNG ELECTRONICS CO., LTD
12th Fl., Samsung Main Bldg., 250, 2-Ka,
Taepyung-Ro,Seoul,Korea
TEL: +82 31 200 6077
FAX: +82 31 200 9099
APPROVED BY : ETL SEMKO
Torshamnsgatan 43, Box 1103, SE-164 22 Kista, Sweden
TEL: +46 8 750 00 00
FAX: +46 8 750 60 30
AK68-00412L
TUR ENG
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Before you start
Table of Contents
1. Setting up
CAUTION : USE OF ANY CONTROLS,
ADJUSTMENTS, OR PROCEDURES OTHER THAN
SPECIFIED HEREIN MAY RESULT IN
Setup
Accessories
* Refer to the identification label located on the back
panel of your player for its proper operating voltage.
* Install your player in a cabinet with adequate
ventilation holes. (7~10cm) Do not block ventilation
holes on any of the components for circulation of air.
* Do not push the disc tray by the hand.
* Do not stack components.
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Before you start . . . . . . . . . . . . . . . . . . . . . . . .3
General Features . . . . . . . . . . . . . . . . . . . . . . .4
Disc Type and Characteristics . . . . . . . . . . . . .5
Description-Front Panel . . . . . . . . . . . . . . . . . .6
Description-Rear Panel . . . . . . . . . . . . . . . . . .8
Tour of the Remote Control . . . . . . . . . . . . . . .9
HAZARDOUS RADIATION EXPOSURE.
1
* Be sure to turn all components off before moving the
player.
STANDBY/ON
E
Z
V
I
E
W
P
L
A
Y
LOADING
* Before connecting other components to this player, be
sure to turn them off.
* Be sure to remove the disc and turn off the player
after use, especially if you don’t use it for a long time.
Batteries for
Remote Control
(AAA Size)
Remote Control
Connections
Choosing a Connection . . . . . . . . . . . . . . . . .10
Basic Functions
2. For your safety
STANDBY/ON
Z
W
P
L
A
Y
LOADING
* This product utilizes a laser. Use of controls or
adjustments or performance of procedures other than
those specified herein may result in hazardous
radiation exposure.
* Do not open covers and do not repair yourself.
Refer servicing to qualified personal.
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . .12
Using the Search & Skip Functions . . . . . . . .13
Using the Display Function . . . . . . . . . . . . . . .13
Using the Disc and Title Menu . . . . . . . . . . . .14
Using the Function Menu . . . . . . . . . . . . . . . .15
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . .15
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . .16
Program Play & Random Play . . . . . . . . . . . .16
STANDBY/ON
P
L
A
Y
2
3
4
5
User’s Manual
Video/Audio Cable
3. Caution
* Your player is not intended for industrial use but for
domestic purposes. Use of this product is for
personal use only.
* Do not put any container filled with liquid or any small
metal objects on the player.
* Exterior influences such as lightning and static
electricity can affect normal operation of this player.
If this occurs, turn the player off and on again with the
POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will
operate normally.
* When condensation forms inside the player due to
sharp changes in temperature, the player may not
operate correctly. If this occurs, leave the player at
room temperature until the inside of the player
becomes dry and operational.
Advanced Functions
Install Batteries in the Remote
1. Open the battery cover on the back of the
remote.
Adjusting the Aspect Ratio (EZ View) . . . . . . .17
Selecting the Audio Language . . . . . . . . . . . .18
Selecting the Subtitle Language . . . . . . . . . . .18
Changing the Camera Angle . . . . . . . . . . . . .19
Using the Instant Replay/Skip Function . . . . .19
Using the Bookmark Function . . . . . . . . . . . .20
Using the Zoom Function . . . . . . . . . . . . . . . .21
Clips Menu for MP3/WMA/JPEG . . . . . . . . . .21
Folder Selection . . . . . . . . . . . . . . . . . . . . . . .22
MP3/WMA Playback . . . . . . . . . . . . . . . . . . .22
Picture CD Playback . . . . . . . . . . . . . . . . . . .23
2. Insert two AAA batteries. Make sure that the
polarities (+ and -) are aligned correctly.
3. Replace the battery cover.
STANDBY/ON
E
Z
V
I
E
W
P
L
A
Y
LOADING
If remote doesn’t operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
4. Disc
* Do not clean record-cleaning sprays, benzene,
thinner, or other volatile solvents that may cause
damage to the disc surface.
* Do not touch the disc’s signal surface. Hold by the
edges or by one edge and the hole in the center.
* Wipe the dirt away gently; never wipe a cloth back and
forth over the disc.
Changing Setup menu
Using the Setup Menu . . . . . . . . . . . . . . . . . .24
Setting Up the Language Features . . . . . . . . .25
Setting Up the Audio Options . . . . . . . . . . . . .27
Setting Up the Display Options . . . . . . . . . . . .28
Setting Up the Parental Control . . . . . . . . . . .29
5. Environmental info
* The battery used in this product contains chemicals
that are harmful to the environment.
* So, dispose of batteries in the proper manner,
according to federal, state, and local regulations.
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .31
Specifications . . . . . . . . . . . . . . . . . . . . . . . .32
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-2
ENG-3
General Features
Disc Type and Characteristics
Excellent Sound
Note
This DVD player is capable of playing the following types of discs with the corresponding
logos:
* Discs which cannot be played with this player.
Dolby Digital, a technology developed by Dolby
Laboratories provides crystal clear sound
reproduction.
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
Recording Types Disc Size Max. Playing Time
Characteristics
Disc Types (Logos)
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
Screen
• DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
Single-sided 240 min.
12 Cm
Double-sided 480 min.
Audio
DVD
Video with MPEG-2 compression technology.
Both regular and widescreen(16:9) pictures can be
viewed.
+
* Ability to play back may depend on recording
conditions.
• Various screen and audio functions
can be easily selected through the
on-screen menu.
Single-sided 80 min.
Video
8 Cm
Double-sided 160 min.
• DVD-R, +R
• CD-RW
Slow Motion
An important scene can be viewed in slow motion.
• DVD+RW, -RW
VIDEO-CD
AUDIO-CD
* It may not play CD-R, CD-RW and DVD-R in all
cases due to the type of disc or condition of the
recording.
74 min.
20 min.
12 Cm
8 Cm
Audio
+
Video
Programmed Play (CD)
You can program tracks to play in desired order.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
Parental Control (DVD)
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
COPY PROTECTION
Many DVD discs are encoded with copy
• CD is recorded as a Digital
Signal with better audio quality,
less distortion and less
deterioration of audio quality
over time.
74 min.
20 min.
12 Cm
8 Cm
protection. Because of this, you should only
connect your DVD player directly to your TV, not
to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected DVD discs.
Audio
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
EZ VIEW (DVD)
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
Disc Markings
Play Region Number
Both the DVD player and the discs are coded by region.
These regional codes must match in order for the disc to
play. If the codes do not match, the disc will not play.
~
Play Region Number
Digital Photo Viewer (JPEG)
You can view the Digital Photos on your TV.
PAL broadcast system in U.K, France,
Germany, etc.
The Region Number for this player is described on the
rear panel of the player.
authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
PAL
Repeat
Dolby Digital disc
Stereo disc
You can repeat a song or movie simply by pressing
the REPEAT button.
PROGRESSIVE SCAN OUTPUTS (525p/625p)
STEREO
“CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMEND-
ED THAT THE USER SWITCH THE CONNECTION
TO THE ‘STANDARD DEFINITION’ OUTPUT.
IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p AND
625p DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.”
MP3/WMA
This unit can play discs created from MP3/WMA
files.
DIGITAL
SOUND
Digital Audio disc
DTS disc
MP3 disc
Instant Replay (DVD)
This function is used to replay the previous
10 seconds of a movie from the current
position.
Instant Skip (DVD)
This function skips playback ahead 10
seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-4
ENG-5
Description-Front Panel
Description-Front Panel
DVD-P147
DVD-P247A
STANDBY/ON
EZ VIEW
EZ VIEW
PLAY
LOADING
STANDBY/ON
1
2 3 4 5 6
7
8 9 10
11
1
2 3 4 5 6
8
7
9
Front Panel Controls
Front Panel Controls
1. STANDBY/ON (
6. EZ VIEW
)
1. STANDBY/ON (
)
6. EZ VIEW
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
• When the player is plugged in, the Power LED
lights. If you press the STANDBY/ON button to
turn on the player, the LED goes out.
• When the player is plugged in, the Power LED
lights. If you press the STANDBY/ON button to
turn on the player, the LED goes out.
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
7. OPEN/CLOSE (
)
7. OPEN/CLOSE (
)
• Press to open and close the disc tray.
2. SKIP (
) / SEARCH
2. SKIP (
) / SEARCH
• Press to open and close the disc tray.
• Allow you to search backward through a disc.
Use to skip the title, chapter or track.
8. DISPLAY
• Allow you to search backward through a disc.
Use to skip the title, chapter or track.
8. PLAY LED
• When playing the disc, the Play LED lights.
• Operation indicators are displayed here
.
3. STOP (
)
3. STOP (
)
9. DISC TRAY
• Place the disc here.
• Stops disc play.
9. REMOCON RECEIVER
• Stops disc play.
4. PLAY/PAUSE (
)
10. LOADING LED
• Begin or pause disc play.
4. PLAY/PAUSE (
)
• When loading the disc, the Loading LED lights.
• Begin or pause disc play.
5. SKIP (
) / SEARCH
11. DISC TRAY
• Allow you to search forward through a disc.
Use to skip the title, chapter or track.
5. SKIP (
) / SEARCH
• Place the disc here.
• Allow you to search forward through a disc.
Use to skip the title, chapter or track.
Display Indicators
Power LED
(Red)
Play LED
(Green)
Loading LED
(Orange)
LED
Function
Power off/Standby
No disc
O
X
X
X
O
X
1
Stop
X
X
X
O
Loading
X
Blinks
X
Play/Skip
Search/Pause
Error
X
O
X
Blinks
Blinks
X
2
3
Front Panel Display
Blinks
Blinks
1. Disc type indicators
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-6
ENG-7
Description-Rear Panel
Tour of the Remote Control
6. STOP Button (
7. MENU Button
)
• Brings up the DVD player’s menu.
Pr
Pb
Y
1
2
11
8. RETURN Button
• Returns to a previous menu.
COAXIAL
OPTICAL
COMPONENT VIDEO OUT
R
L
9. REPEAT A-B Button
• Use to mark a segment to repeat between A and B.
ANALOG AUDIO OUT
VIDEO OUT
S-VIDEO OUT
12
13
14
3
4
5
10. SUBTITLE Button
11. OPEN/CLOSE (
) Button
• To open and close the disc tray.
1
2
3
4
5
6
7
15
16
6
7
12. CLEAR Button
• Use to remove menus or status displays from the
screen.
Rear Panel
1. DIGITAL AUDIO OUT JACKS
17
18
8
13. INSTANT REPLAY Button
6. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with
Component Video in jacks. These jacks provide
Pr, Pb and Y video. Along with S-Video,
Component Video provides the best picture
quality.
• If Component (P-SCAN) Video Output is
selected in Setup Menu, progressive scan mode
will work.
• This function is used to replay the previous 10
seconds of a movie from the current position.
• Use either a coaxial digital cable to connect to a
compatible Dolby Digital receiver.
14. INSTANT SKIP Button
9
Use to connect to an A/V Amplifier that contains
a Dolby Digital, MPEG-2 or DTS decoder.
19
• This function skips playback ahead 10 seconds.
20
21
22
10
15. PLAY/PAUSE Button (
)
2. DIGITAL AUDIO OUT JACKS (DVD-P247A only)
• Use either an optical cable to connect to a
compatible Dolby Digital receiver.
• Begin/Pause disc play.
16. INFO Button
• If Component (I-SCAN) Video Output is selected
in Setup Menu, interlaced scan mode will work.
• Displays the current disc mode.
Use to connect to an A/V Amplifier that contains
a Dolby Digital, MPEG-2 or DTS decoder.
17. DISC MENU Button
7. SCART JACK
• Connect to a TV scart input jack.
• Brings up the Disc menu.
3. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your
television, audio/video receiver.
18. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
DVD Function Buttons
Important Note
4. VIDEO OUT JACK
• Use a video cable to connect to the Video input
jack on your television.
• The Video Output in Setup Menu must be set to
Component (I-SCAN), SCART Output or
S-Video.
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV
User’s Manual’s instructions regarding Progressive
Scan settings in the TV’s menu system.
1. DVD POWER Button
19. EZ VIEW Button
• Turns the power on or off.
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
2. NUMBER Buttons
20. REPEAT Button
3. PROG Button
• Allows you to program a specific order.
• If Component (P-SCAN) Video Output is selected
in Setup Menu, Video and S-Video will not work.
• Allows you to repeat play a title, chapter, track, or
disc.
5. S-VIDEO OUT JACK
• See page 29 to get more information on how to
use the Setup Menu.
4. STEP Button
• Advances play one frame at a time.
• Use the S-Video cable to connect this jack to
S-Video jack on your television for a higher
picture quality.
• The Video Output in Setup Menu must be set to
S-Video.
21. ANGLE Button
• Use to access various camera angles on a DVD.
5. SEARCH/SKIP Buttons (
• Allow you to search forward/backward through
/
,
/
)
22. AUDIO Button
• Use this button to access various audio functions
on a disc.
a disc. Use to skip the title, chapter or track.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-8
ENG-9
Choosing a Connection
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Before Connecting the DVD Player
Method 1
Good
Method 2
Method 3
Method 4
Method 5
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
Optimum
picture
Best
picture
Best
picture
Better
picture
Basic Audio
picture
• Refer to the owner’s manual of the additional components you are connecting for more information on those
particular components.
TV
Connection to an Audio
Scart
Cables
(not
AV
Cable
S-Video
Cable
Video
Cables
Method 1
Method 2
supplied)
OR
OR
OR
AUDIO
SYSTEM
DVD
Player
Pr
Pb
Y
Pr
Pb
Y
R
L
2ch Amplifier
Dolby Digital Decoder
Digital Audio Input Jack
VIDEO OUT
ANALOG AUDIO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
Audio Input Jacks
Component Video
Jacks
(Progressive)
Component Video
Jacks
Audio Output
Jacks
Video Output S-Video
Jack Jack
SCART Jack
(Interlace)
Method 1
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to S-Video, SCART Output or Component (I-SCAN).)
Method 2
DVD Player + TV with S-Video Input Jack
(The Video Output in Setup Menu must be set to S-Video.)
OR
Method 3
DVD-P247A only
DVD Player + TV with Scart Input Jacks (Audio & Video)
(The Video Output in Setup Menu must be set to SCART Output.)
Method 4
DVD
OPTICAL
Player
R
L
DVD Player + TV with interlace Scan Component Video Jacks
ANALOG AUDIO OUT
COAXIAL
(The Video Output in Setup Menu must be set to Component (I-SCAN).)
Analog Audio Out Jacks
Digital Audio Out Jack
Method 5
DVD Player + TV with Progressive Scan Component Video Jacks.
(The Video Output in Setup Menu must be set to Component (P-SCAN).)
• If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on
your TV. Then select Component (P-SCAN)(480p) out of Video Output in Setup Menu. Within 10 seconds,
change the TV’s external input to 525p(480p or Component) and select “Yes” (See Page 29).
• If Component (P-SCAN) Video Output is selected in Setup Menu, Video(Composite) and S-Video will not work.
Important Note
•
Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported,
follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.
• Depending on your TV, the Method of connection may differ from the illustration above.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-10
ENG-11
Playing a Disc
Using the Search & Skip Functions
Using the Display Function
7. Step Motion Play (Except CD)
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will
appear.
Before Play
During play, you can search quickly through a
chapter or track or use the skip function to
jump to the next selection.
When Playing a DVD/VCD/CD
• Turn on your TV and set it to the correct Video
Input by pressing TV/VIDEO button on the TV
remote control.
• If you connected an external Audio System, turn
on your Audio System and set it to the correct
Audio Input.
1. During play, press the INFO button on the remote.
2. Use the UP/DOWN buttons to select the desired
item.
- No sound is heard during STEP mode.
Searching through a Chapter or Track
- Press the PLAY/PAUSE (
) to resume normal play.
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from the desired time.
Press the SEARCH (
or
) button on the
(You can only perform step motion play in the forward
direction.)
remote for more than 1 second.
If you want to search at a faster speed on a DVD,
VCD or CD, press and hold the button. (DVD-P147)
After plugging in the player, the first time you press
the DVD POWER button, this screen comes up :
If you want to select a language, press a
NUMBER button. (This screen will only appear
when you plug in the player for the first time.)
If the language for the startup screen is not set,
the settings may change whenever you turn the
power on or off. Therefore, make sure that you
select the language you want to use.
8. Slow Motion Play (Except CD)
Press and hold the
button to choose the play speed
Press the
or
button on the remote for more
between 1/8, 1/4 and 1/2 of normal during PAUSE or
STEP mode. (DVD-P147)
4. To make the screen disappear, press the INFO
button again.
than 1 second and press again to search at a faster
speed on a DVD, VCD or CD. (DVD-P247A)
Press and hold the
button on the remote during
PAUSE or STEP mode. Press again and you can select
slow motion play for 1/8, 1/4 and 1/2 of normal speed.
(DVD-P247A)
DVD 2X, 8X, 32X, 128X
VCD 4X, 8X
DVD
- No sound is heard during slow mode.
CD 2X, 4X, 8X
DVD
- Press the PLAY/PAUSE (
) to resume normal play.
01
Title
- Reverse slow motion play will not work.
02
Chapter
0:00:13
Time
ENG 5.1CH
Audio
RESUME function
Skipping Tracks
Off
Subtitle
ENTER
When you stop disc play, the player remembers
where you stopped, so when you press
During play, press the
• When playing a DVD, if you press the
moves to the next chapter. If you press the
or
button.
button, it
button, it
PLAY/PAUSE (
) again, it will pick up where you
left off. (unless the disc is removed or the player is
moves to the beginning of the chapter. One more press
makes it move to the beginning of the previous chapter.
unplugged, or if you press the STOP (
twice.)
) button
VCD
VCD
• When playing a VCD 2.0 in MENU OFF mode, a CD, if
Play
01
Track
you press the
press the
button, it moves to the next track. If you
button, it moves to the beginning of the
0:00:48
Time
Note
1. Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray
opens.
ENTER
• If the player is left for about 5 minutes in pause
mode, it will stop.
track. One more press makes it move to the beginning of
the previous track.
• If the player is left in the stop mode for more than
about 30 minutes, the power will automatically shut
off. (Automatic Power-Off Function)
• When playing a VCD 2.0 in MENU OFF mode, if a track
2. Place a disc gently into the tray with the disc’s
label facing up.
exceeds 15 minutes when playing a VCD and you press
the
button, it moves forward 5 minutes.
• If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
If you press the
button, it moves backward 5 minutes.
3. Press the PLAY/PAUSE (
) button or
CD
OPEN/CLOSE button to close the disc tray.
CD
(
) button to resume normal play.
01
4. Stopping Play
Press the STOP (
Track
• This
icon indicates an invalid button press.
0:00:48
Time
) button during play.
Note
ENTER
• When playing a VCD 2.0, you can choose Menu
On or Menu Off by using the DISC MENU
button.
5. Removing Disc
Press the OPEN/CLOSE button.
6. Pausing Play
Press the PLAY/PAUSE (
remote during play.
) or STEP button on the
- Screen stops, no sound.
- To resume, press the PLAY/PAUSE (
again.
) button once
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-12
ENG-13
Using the Display Function
Using the Function Menu
Repeat Play
Using the Disc and Title Menu
To access the desired title when there is
Using the Function Menu
Repeat the current track, chapter, title, a
chosen section (A-B), or all of the disc.
Using the Disc Menu
more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified.
Title
1. Press the MENU button during playback.
1. During the playback of a DVD disc, press the
MENU button on the remote.
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
When playing a DVD/VCD/CD
2. Select Disc Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
1. Press the REPEAT button on the remote.
Repeat screen appears.
3. Function selection screen appears: Info, Zoom,
Bookmark, Repeat and EZ View.
Most DVD discs are recorded in
chapters so that you can quickly find a
specific passage (similar to tracks on an
audio CD).
2. Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
Chapter
-
Info (See Page 13~14)
- Zoom (See Page 21)
• Chapter (
) : repeats the chapter that is playing.
-
-
Bookmark (See Page 20)
Repeat (See Page 15)
• Title ( T ) : repeats the title that is playing.
• A-B : repeats a segment of the disc that you select.
Allows playback of the film from a
desired time. You must enter the starting
time as a reference.
- EZ View (See Page 17)
Time
Audio
DVD
4. Use the UP/DOWN button to highlight one of the
5 functions. Then press the RIGHT or ENTER
button to access the function.
REPEAT ENTER
Off
01
01 A - B
T
Refers to the language of the film
soundtrack. In the example, the
soundtrack is played in English 5.1CH.
A DVD disc can have up to eight
different soundtracks.
Using the Title Menu
1. During the playback of a DVD disc, press the
MENU button on the remote.
VCD/CD
2. Select Title Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
Refers to the subtitle languages
available in the disc.
REPEAT ENTER
Off
T
01
D
01 A - B
Subtitle
You will be able to choose the subtitle
languages or, if you prefer, turn them off
from the screen.
A DVD disc can have up to 32 different
subtitles.
3. Press ENTER.
4. To return to normal play, press REPEAT again,
then press the LEFT/RIGHT buttons to select Off
and press ENTER.
Note
• You can also directly select these functions using
their respective buttons on the remote.
* REPEAT A-B
• Press the REPEAT A-B button to select the point where
the function starts. (A)
• Press the REPEAT A-B button to select the point where
the function ends. (B)
Note
• When in VCD 2.0 mode (Menu On mode), this
function does not work. (See page 13)
• A-B REPEAT does not allow you to set point (B) until at
least 5 seconds has elapsed after point (A) has been
set.
Note
• Depending on the disc, the Title and Disc Menus
may not work.
• Title Menu will only be displayed if there are at
least two titles in the disc.
Note
• DVD repeats play by chapter or title, CD and VCD
repeat play by disc or track.
• You can also use the Disc Menu, using the DISC
MENU button on the remote.
• To terminate the function, press the ‘CLEAR’
button or the ‘REPEAT A-B’ button again.
• In VCD 2.0, the DISC MENU button is used to
select Menu On or Menu Off mode.
• Depending on the disc, the Repeat function may
not work.
• When in VCD 2.0 mode (Menu On mode), this
function does not work. (See page 13)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-14
ENG-15
Slow Repeat Play
Program Play & Random Play
Adjusting the Aspect Ratio (EZ View)
This feature allows you slowly to repeat
scenes containing sports, dancing, musical
instruments being played etc. so you can
study them more closely.
Program Play (CD)
To play back using aspect ratio (DVD)
Press the EZ VIEW button.
If you are using a 4:3 TV
1. Press the PROG button.
1. For 16:9 aspect ratio discs
• The screen size changes when the button is
pressed repeatedly.
• The screen zoom mode operates differently
depending on the screen setting in the initial setup
menu.
• To ensure correct operation of the EZ VIEW
button, you should set the correct aspect ratio in
the initial setup (See page 28).
• 4:3 Letter Box
2. Use the LEFT/RIGHT buttons to select
PROGRAM. Press the ENTER button.
Displays the content of the DVD title in 16:9
aspect ratio. The black bars will appear at the
top and bottom of the screen.
When playing a DVD/VCD
3. Use the LEFT/RIGHT/UP/DOWN buttons to select
the first track to add to the program.
Press the ENTER button. The selection numbers
appear in the Program Order box.
1. During play, press the PLAY/PAUSE (
button.
)
• 4:3 Pan Scan
The left and right of the screen are cut off and
displays the central portion of the 16:9 screen.
2. Press and hold the
button to choose the play
4. Press the PLAY/PAUSE (
The disc will be played in programmed order.
) button.
speed between 1/8, 1/4, and 1/2 of normal during
PAUSE or STEP mode. (DVD-P147)
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
If you are using a 16:9 TV
1. For 16:9 aspect ratio discs
Press and hold the
button on the remote
during PAUSE or STEP mode. Press again and
you can select slow motion play for 1/8, 1/4 and
1/2 of normal speed. (DVD-P247A)
PROGRAM
RANDOM
The picture will look vertically stretched.
•
Wide Screen
• Zoom Fit
Displays the content of the DVD title in 16:9
aspect ratio.
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
3. Press the REPEAT A-B button to select the point
where the function starts. (A)
• Screen Fit
PROGRAM 01
The top and bottom of the screen are cut off.
When playing a 2.35:1 aspect ratio disc, the
black bars at the top and bottom of the screen
will disappear. The picture will look vertically
stretched. (Depending on the type of disc, the
black bars may not disappear completely.)
4. Press the REPEAT A-B button to select the point
where the function ends. (B)
Track
Program Order
2. For 4:3 aspect ratio discs
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
• Normal Screen
Displays the content of the DVD title in 4:3
aspect ratio.
Note
ENTER
RETURN
CLEAR
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
• The disc will play from A to B repeatedly at the
speed you chose.
• Zoom Fit
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
• To terminate the function, press the ‘CLEAR’
button or the ‘REPEAT A-B’ button again.
The picture would look vertically stretched.
• Zoom Fit
Random Play (CD)
• A-B REPEAT does not allow you to set point (B)
until at least 5 seconds has elapsed after point (A)
has been set.
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
2. For 4:3 aspect ratio discs
1. Press the PROG button.
• Normal Wide
2. Use the LEFT/RIGHT buttons to select RANDOM.
Press the ENTER button.
• When in VCD 2.0 mode (Menu On mode), this
function does not work. (See page 13)
Displays the content of the DVD title in 16:9
aspect ratio. The picture will look horizontally
stretched.
PROGRAM
RANDOM
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
Note
• This function may behave differently depending on
the type of disc.
The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
Note
• Depending on the disc, the Program and Random
Play functions may not work.
• Vertical Fit
• This unit can support a maximum of 20
When a 4:3 DVD is viewed on a 16:9 TV, black
bars will appear at the left and right of the
screen in order to prevent the picture from
looking horizontally stretched.
programmed tracks.
• While in playback mode, press the CLEAR button
on the remote control to cancel Programmed Play
or Random Play.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-16
ENG-17
Selecting the Audio Language
Selecting the Subtitle Language
Changing the Camera Angle
Using the Instant Replay/Skip Function
You can select a desired language quickly and
easily with the AUDIO button.
You can select a desired subtitle quickly and
easily with the SUBTITLE button.
When a DVD contains multiple angles of a
particular scene, you can use the ANGLE
function.
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function.
Using the AUDIO button
Using the SUBTITLE button
Using the ANGLE button
If you press the INSTANT REPLAY button, the
current scene moves backward about 10 seconds,
and plays back.
1. Press the AUDIO button.
1. Press the SUBTITLE button.
- The subtitle languages are represented by
abbreviations.
If the disc contains multiple angles, the ANGLE
mark appears on the screen.
2. The Audio changes when the button is pressed
repeatedly.
The audio languages are represented by abbreviations.
* Depending on the disc, the Instant Replay function may
not work.
2. The subtitle changes when the button is pressed
repeatedly.
1. Press the ANGLE button, then ANGLE icon will
appear with the current angle number and the
number of angles available.
3. Press the AUDIO button to select Stereo, Left or
Right. (On VCD/CD)
3. To turn off the display, press the CLEAR or
RETURN button.
2. Press the ANGLE button repeatedly to the
desired angle.
DVD
SUBTITLE
ENG
3. To remove the ANGLE icon, press the CLEAR or
RETURN button.
AUDIO
ENG DOLBY DIGITAL 5.1CH
ANGLE
4/6
Using the Instant Skip function (DVD)
SUBTITLE
Off
VCD/CD
Use this function to skip playback about 10
seconds ahead of the current scene.
AUDIO
Stereo
Press the INSTANT SKIP button.
- Playback will skip ahead 10 seconds.
- Depending on the disc, this function may not work.
Note
• If the disc has only one angle, this feature won’t
work. Currently, very few discs have this feature.
Note
Note
• This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
• This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
• A DVD disc can contain up to 8 audio languages.
• A DVD disc can contain up to 32 subtitle
languages.
• How to have the same audio language come up
whenever you play a DVD;
Refer to “Setting Up the Language Features” on
page 26.
• How to have the same subtitle language come
up whenever you play a DVD;
Refer to “Setting Up the Language Features” on
page 26.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-18
ENG-19
Using the Bookmark Function
Using the Zoom Function
Clips Menu for MP3/WMA/JPEG
1. Open the disc tray.
This feature lets you bookmark sections of a
DVD or VCD (Menu Off mode) so you can
quickly find them at a later time.
Recalling a Marked Scene
Using the Zoom Function (DVD/VCD)
2. Place the disc on the tray.
- Place the disc with the labeled side up.
1. During play, press the MENU button on the
remote and select the Bookmark.
1. During play or pause mode, press the MENU
button on the remote.
Using the Bookmark Function (DVD/VCD)
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
2. Use the LEFT/RIGHT buttons to select a marked
scene.
1. During play, press the MENU button on the
remote.
3. Select Zoom using the UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Press the PLAY/PAUSE (
the marked scene.
) buttons to skip to
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
O ff
4. Use the UP/DOWN or LEFT/RIGHT buttons to
select the part of the screen you want to zoom in
on.
00:00:23
1_mp3
3. Select Bookmark using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
5. Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
B e c a u s e Yo u
C a c t u s
4. Use the LEFT/RIGHT buttons to move to the
desired bookmark icon.
Sad Day
- During VCD play, press ENTER to zoom in 2X/Normal
in order.
5. When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
Parent Folder, Current Folder Folders and Files in
and Peer Folders Current Folder
Clearing a Bookmark
1. During play, press the MENU button on the
remote and select the Bookmark.
2. Use the LEFT/RIGHT buttons to select the
bookmark number you want to delete.
•
•
•
: Name of currently playing file.
: Current Playback Time.
3. Press the CLEAR button to delete a bookmark
number.
: Current Playback Mode : There are 4
modes, toggle by the REPEAT button.
- Off : Normal Playback
Note
- Track : Repeats the current track.
- Folder : Repeats the current folder.
- Random : Files in the disc will be played
in random order.
• Up to three scenes may be marked at a time.
• When in VCD 2.0 mode (Menu On mode), this
function does not work. (See page 13)
• Depending on the disc, the Bookmark function may
not work.
•
•
•
•
•
: MP3 file icon.
: WMA file icon.
: JPEG file icon.
: Folder icon.
: Current Folder icon.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-20
ENG-21
Folder Selection
MP3/WMA Playback
MP3/WMA Playback
Picture CD Playback
1. Open the disc tray.
1. Select the desired folder. (See page 22 to select
the folder)
The folder can only be selected in the Stop
mode.
CD-R MP3/WMA discs
When you record MP3 or WMA files on CD-R,
please refer to the following.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
2. Use the UP/DOWN buttons to select a Picture file in
clips menu and then press the ENTER button. You
should get a screen that looks like the one below.
• To select the Parent Folder
• Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
Press the RETURN button to go to parent folder,
or use the UP/DOWN buttons to select “..” and
press ENTER to go to the parent folder.
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
ENTER RETURN
• To select the Peer Folder
MP3/WMA Play Function
• When naming your MP3 or WMA files, do not exceed 8
characters, and enter ".mp3, .wma" as the file
extension.
Use the LEFT/RIGHT buttons to highlight left
window. Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
1. Select the desired folder.
General name format of: Title.mp3. or Title.wma. When
composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of
special characters including: (.,/,\,=,+).
2. Use the UP/DOWN or LEFT/RIGHT buttons to
select a song file.
• Use the INFO button on the remote control to select
the menu you want to view and then press the ENTER
button.
• To select the Sub-Folder
Use the LEFT/RIGHT buttons to highlight right
window. Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
3. Press ENTER to begin playback of the song file.
• Use a decompression transfer rate of at least 128
Kbps when recording MP3 files.
•
: Returns to the Album Screen.
O ff
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that
is conversion to MP3 format, of at least 128 Kbps and up
to 160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128
Kbps will not be played properly.
• To see the next 6 pictures, press the
button.
button.
00:00:23
1_mp3
Root
• To see the previous 6 pictures, press the
WMA
JPEG
•
: Each time the ENTER button is pressed, the
B e c a u s e Yo u
C a c t u s
picture rotates 90 degrees clockwise.
Sad Day
•
: Each time the ENTER button is pressed, the
picture is enlarged up to 4X.
MP3
Parent Folder
(Normal ➝ 2X ➝ 4X ➝ 2X ➝ Normal)
• Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
MUSIC
Current Folder
•
: The unit enters slide show mode.
Sound quality with WMA files basically depends on the
rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital
sampling rate, that is conversion to WMA format, of at
least 64Kbps and up to 192Kbps.
1st
Sub-Folders
*Before beginning the Slide Show, the picture interval
must be set.
Repeat/Random playback
2nd
Press the REPEAT button to change playback
mode. There are 4 modes, such as Off, Track,
Folder and Random.
SONG FILE 1
SONG FILE 2
ENTER RETURN
TIMER:
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
Peer Folders
- Off : Normal Playback
- Track : Repeats the current song file.
- Folder : Repeats the song files which have the
same extension in the current folder.
- Random : Song files which have the same
extension will be played in random
order.
•
Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected
to prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of
Microsoft Inc) and SDMITM (registered trade mark of The
SDMI Foundation). You cannot copy such files.
SONG FILE 3
•
: When this icon is selected and ENTER is
pressed, the pictures change automatically
with about a 6 second interval.
• Important: The above recommendations cannot be taken
as a guarantee that the DVD player will play MP3
* To resume normal play, press the CLEAR button.
•
•
: The pictures change automatically with about
a 12 second interval.
recordings, or as an assurance of sound quality. You
should note that certain technologies and methods for
MP3 file recording on CD-Rs prevent optimal playback of
these files on your DVD player (degraded sound quality
and in some cases, inability of the player to read the files).
: The pictures change automatically with about
a 18 second interval.
*Depending on a file size, the amount of time between
each picture may be different from the manual.
• This unit can play a maximum of 3000 files and 300
folders per disc.
*If you don’t press any button, the slide show will start
automatically in about 10 seconds by default.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-22
ENG-23
Picture CD Playback
Using the Setup Menu
Setting Up the Language Features
Note
The Setup menu lets you customize your DVD
player by allowing you to select various
language preferences, set up a parental level,
even adjust the player to the type of television
screen you have.
If you set the player menu, disc menu, audio
and subtitle language in advance, they will
come up automatically every time you watch a
movie.
Using the Disc Menu Language
• If no buttons on the remote control pressed for 10
seconds, the menu will disappear.
Press the INFO button on the remote control to
display the menu again.
This function changes the text language only on the
disc menu screens.
1. With the unit in Stop mode, press the MENU
button.
• Press the STOP button to return to the clips menu.
Using the Player Menu Language
• When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
1. With the unit in Stop mode, press the MENU
button on the remote. Select Setup using
UP/DOWN buttons, then press the RIGHT or
ENTER button.
1. With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
CD-R JPEG Discs
Language Setup : Setup of the Language.
• Only files with the “.jpg” and “.JPG” extensions can be
played.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Disc Menu using UP/DOWN buttons, then
press the RIGHT or ENTER button.
Audio Setup : Setup of the Audio Options
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
Display Setup : Setup of the Display Options
Use to select which type of screen you want to
watch and several display options.
5. Use the UP/DOWN buttons to select the desired
language.
- Select “Others” if the language you want is not listed.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to
prevent children from viewing unsuitable
movies such as those with violence, adult
subject matter, etc.
format can be played.
DISC MENU LANGUAGE
• The name of the JPEG file may not be longer than 8
characters and should contain no blank spaces or
special characters (. / = +).
Disc Menu
4. Select Player Menu using UP/DOWN buttons,
then press the RIGHT or ENTER button.
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
LANGUAGE SETUP
Others
Disc Menu
Title Menu
• A maximum of 3000 images can be stored on a single
CD.
6. Press the ENTER button.
- The language is selected and the screen returns to
Function
Setup
• Kodak Picture CDs are recommended.
5. Use the UP/DOWN buttons to select the desired
language.
Language Setup menu.
• When playing a Kodak Picture CD, only the JPEG
files in the pictures folder can be played.
• Kodak Picture CD : The JPEG files in the pictures
folder can be played automatically.
2. Use the UP/DOWN buttons on the remote to
access the different features.
• Konica Picture CD : If you want to see the Picture,
3. Press the ENTER or RIGHT button to access the
sub features.
select the JPEG files in the clips menu.
• Fuji Picture CD : If you want to see the Picture, select
the JPEG files in the clips menu.
To make the setup screen disappear after setting
up, press the MENU button again.
• QSS Picture CD : The unit cannot play QSS Picture
CD.
6. Press the ENTER button.
• If a number of files in 1 Disc are over 3000, only 3000
JPEG files can be played.
- The language is selected and the screen returns to
Language Setup menu.
Note
Depending on the disc, some Setup Menu
selections may not work.
- To make the SETUP menu disappear, press the
RETURN or LEFT button.
• If a number of folders in 1 Disc are over 300, only
JPEG files in 300 folders can be played.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-24
ENG-25
Setting Up the Language Features
Setting Up the Audio Options
1. With the unit in Stop mode, press the MENU button.
DTS
Using the Audio Language
Using the Subtitle Language
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
1. With the unit in Stop mode, press the MENU
button.
1. With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
Note There is no analog audio output when you play
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
DTS sound disc.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Audio using UP/DOWN buttons, then
press the RIGHT or ENTER button.
4. Select Subtitle using UP/DOWN buttons, then
press the RIGHT or ENTER button.
PCM Down Sampling
1. On : Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
5. Use the UP/DOWN buttons to select the desired
5. Use the UP/DOWN buttons to select the desired
language.
language.
2. Off : Select this when the amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
- Select “Original” if you want the default soundtrack
language to be the original language the disc is
recorded in.
- Select “Automatic” if you want the subtitle language to
be the same as the language selected as the audio
preference.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
- Select “Others” if the language you want is not listed.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select
as your initial language; in that case the disc will use its
original language setting.
Note
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
AUDIO LANGUAGE
AUDIO SETUP
Dolby Digital Output
:
PCM
Audio
MPEG-2 Digital Out
DTS
:
:
:
:
PCM
Off
SUBTITLE LANGUAGE
Automatic
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Dynamic Compression
PCM Down Sampling
On
Original
Others
On
Subtitle
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Others
6. Press the ENTER button.
- The language is selected and the screen returns to
Dolby Digital Output
Language Setup menu.
1. PCM : Converts to PCM(2CH) 48kHz audio. Select
PCM when using the Analog Audio Outputs.
6. Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using the
Digital Audio Output.
Note • Be sure to select the correct Digital Output or
Note
no audio will be heard.
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
MPEG-2 Digital Out
1. PCM : Converts to PCM(2CH) audio. Select PCM
when using the Analog Audio Outputs.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
2. Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH). Select Bitstream when
using the Digital Audio Output.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-26
ENG-27
Setting Up the Display Options
Setting Up the Display Options
Setting Up the Parental Control
1. With the unit in Stop mode, press the MENU button.
Video Output
Select Video Output.
The Parental Control function works in conjunction
with DVDs that have been assigned a rating - which
helps you control the types of DVDs that your family
watches. There are up to 8 rating levels on a disc.
Still Mode
These options will help prevent picture shake in still
mode and display small text clearer.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
1. S-Video : Select when you want to use Video and
S-Video Out.
1. Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
2. Component (I-SCAN) : Select when you want to use
Component Interlace
3. Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
2. Field : Select this feature when the screen shakes in
the Auto mode.
1. With the unit in Stop mode, press the MENU button.
(625i/525i) Out.
2. Select Setup using UP/DOWN buttons, then ress
the RIGHT or ENTER button.
3. Frame : Select this feature when you want to see
small letters more clearly in the Auto mode.
3. Component (P-SCAN) : Select when you want to use
Component Progressive
(625p/525p) Out.
3. Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4. SCART Output : Select when you want to use Scart
Out.
Screen Messages
Use to turn on-screen messages On or Off.
• RGB : Select when you want to use SCART RGB
Out.
Black Level
Adjusts the brightness of the screen.(On/Off)
• S-Video : Select when you want to use SCART
S-Video Out.
• Video : Select when you want to use SCART
Video Out.
TV System
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
1. NTSC Disc : In case of using NTSC disc
• If your TV system only has PAL-Video input you must
choose “PAL”. When you choose “PAL”, Interlace
output format is PAL 60 Hz output.
* If the Yes/No selection in the Display Setup sub Menu
is not made within 10 seconds, the screen returns to
the previous menu.
TV Aspect
Depending on the type of television you have, you may
want to adjust the screen setting (aspect ratio).
• If your TV system only has NTSC, input you must
4. Use RIGHT or ENTER to select Yes if you want
to use a password. The Enter Password screen
appears.
1. 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you have
a TV with a 4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
choose “NTSC Output”.
2. PAL Disc : In case of using PAL disc
• If your TV system only has NTSC-Video input, you
must choose “NTSC Output”.
PARENTAL SETUP
2. 4:3 Pan Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
• If your TV system only has PAL input, you must
choose “PAL Output”.
Use Password
:
No
3. 16:9 Wide :You can view the full 16:9 picture on your
widescreen TV.
DISPLAY SETUP
ENTER
RETURN
MENU
S-Video
Component (I-SCAN)
Component (P-SCAN)
SCART Output
RGB
5. Enter your password. The Re-enter Password
screen appears to confirm the password.
Enter your password again.
S-Video
Video
The player is locked (
).
CREATE PASSWORD
Important Note
TV ASPECT
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual’s
instructions regarding Progressive Scan settings in
the TV’s menu system.
Enter Password
-
-
-
-
4:3 Letter Box
4:3 Pan Scan
RETURN
0 ~ 9
16:9 Wide
• If the screen is blocked by setting the wrong Video
Output, See page 31.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-28
ENG-29
Setting Up the Parental Control
Troubleshooting
5. Select Rating Level using UP/DOWN buttons,
and press ENTER or RIGHT button.
Before requesting service (troubleshooting), please check the following.
CREATE PASSWORD
Action
Problem
Page
Re-enter Password
-
-
-
-
• Check the batteries in the remote. They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try to operate the remote again.
No operations can be
performed with remote.
P3
RETURN
0 ~ 9
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
Disc does not play.
P5
6. Select Rating Level you want using UP/DOWN
buttons. For example, if you select up to Level 6,
discs that contain Level 7, 8 will not play.
- To cancel the Rating Level, select No using RIGHT or
ENTER in Use Password.
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
P10
P27
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
e.g) Setting up in LEVEL6.
RATING LEVEL
Setting Up the Rating Level
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
The
screen.
icon appears on
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
1. With the unit in Stop mode, press the MENU button.
P12
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
The player is locked (
).
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
P24~30
About the Change Password;
The screen ratio cannot
be changed.
- Highlight Change Password using UP/DOWN buttons.
- Press ENTER button.
The Change Password screen appears.
- Enter your new password. Enter the new password again.
• The Screen Ratio is fixed on your DVDs.
P28
P27
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
• Press power on from a cold start with no disc in the unit. Press the
The screen is blocked
STOP (
) and PLAY (
) buttons simultaneously on the front
P29
3. Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
panel for three seconds. The SELECT MENU LANGUAGE display
will appear. Select the number button of the desired language.
Note
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
• Press power on from a cold start with no disc in the unit. Press the
STOP (
panel for three seconds. The SELECT MENU LANGUAGE display
will appear. Select the number button of the desired language.
Press the MENU button, and then press DOWN button to select the
Parental Setup. The Parental Setup is now unlocked as
Forgot password
4. Enter your password.
The Parental Setup screen appears.
) and PLAY (
) buttons simultaneously on the front
• If you have forgotten your password, see Forgot
Password in the Troubleshooting Guide.
P29~30
PASSWORD CHECK
indicated on the display. You can change your password.
Enter Password
-
-
-
-
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
If you experience other
problems.
RETURN
0 ~ 9
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-30
ENG-31
Specifications
Power Requirements
AC 110~240 V, 50/60 Hz
Power Consumption
Weight
12 W
1.8 Kg
General
Dimensions
430mm (W) X 207mm (D) X 46mm (H)
+5°C to +35°C
Operating Temperature Range
Operating Humidity Range
10 % to 75 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
DVD
(DIGITAL VERSATILE DISC)
(Single Sided, Single Layer Disc) : 135 min.
CD : 12Cm
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
(COMPACT DISC)
Disc
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
CD : 8Cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
VCD : 12Cm
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 Ω load)
Composite Video
R(Red) : 0.7 Vp-p (75 Ω load)
G(Green) : 0.7 Vp-p (75 Ω load)
B(Blue) : 0.7 Vp-p (75 Ω load)
Composite Video : 1.0 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Color Signal : 0.3 Vp-p (75 Ω load)
SCART Jack
Video
Output
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Component Video
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
S-Video
2 channel
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*Frequency Response
Audio
110 dB
100 dB
0.004 %
*S/N Ratio
Output
*Dynamic Range
*Total Harmonic Distortion
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-32
|