Samsung Stereo Receiver HT AS730S User Guide

HT-AS730S  
AV Receiver System  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PreCaUtiOnS  
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install  
your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure  
the ventilation slots are not covered. Do not stack anything on top of the amplifier. In order to disconnect the player completely  
from the power supply, remove the mains plug from the wall outlet, especially when left unused for a long period of time.  
During thunderstorms, disconnect AC main plug from the  
wall outlet.  
Do not expose the unit to direct sunlight or other heat  
sources.  
Voltage peaks due to lightning could damage the unit.  
This could lead to overheating and malfunction of  
the unit.  
Protect the player from moisture(i.e. vases) , and excess  
heat(e.g.fireplace) or equipment creating strong magnetic  
or electric fields (i.e.speakers...). Disconnect the power  
cable from the AC supply if the player malfunctions. Your  
player is not intended for industrial use.  
The batteries used with this product contain  
chemicals that are harmful to the environment.  
Do not dispose of batteries in the general household  
trash.  
Use of this product is for personal use only.  
Condensation may occur if your player or disc have been  
stored in cold temperatures.  
If transporting the player during the winter, wait  
approximately 2 hours until the unit has reached room  
temperature before using.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
Digital aV receiver  
DtS  
This product is a pure digital AV receiver that performs  
digital signal processing to minimize signal distortion and  
loss.  
Provides a full range of 6 channels by converting a digital  
PCM or analog stereo signal using DTS digital matrix  
decoding.  
Dolby Pro Logic llx  
Dolby Pro Logic IIx is a new technology that provides  
discrete 7.1 channels out of 2 channel or multi channel  
sources.It also provides Music,Movie and Game modes.  
Sfe (Sound field effect) Using  
32bit audio Digital Signal  
Processing  
Provides more realistic surround sound with normal  
stereo audio sources.  
Dolby Pro Logic Iix is an improved surround system that  
is optimized to a 7.1 CH multimedia system, enabling  
you to maximize your entertainment experience.  
anynet+ (HDMi-CeC) function  
DtS 96/24  
DTS 96/24 encodes standard 16 bit/44.1 kHz sound to  
24 bit/96kHz and applies it to a 5.1 CH sound track.  
Anynet+ is a function that can be used to operate this  
AV Receiver with a Samsung TV remote control, by  
connecting the receiver to a SAMSUNG TV using an  
HDMI Cable. (This function is available only in  
connection with Samsung TV and DVD player  
supporting Anynet+(HDMI-CEC).)  
DOLBy DigitaL eX  
Adds a surround back channel for more spacious sound  
compared to regular 5.1 channel Dolby Digital.  
DtS-eS  
(extended Surround)  
The DTS-ES (Extended Surround) system is a new multi  
digital signal format that was developed by Digital  
Theater Systems Inc.  
DtS (Digital theater Systems)  
DTS provides a discrete 5.1 CH digital audio signal for  
both music and movie contents and uses less  
compression than Dolby Digital for richer sound.  
Supporting full compatibility with the conventional DTS  
digital surround sound format, the DTS-ES (Extended  
Surround) system improves the surround signal for a  
360-degree surround effect.  
iPod  
You can enjoy music files by connecting your iPod  
to the AV Receiver with the supplied iPod dock.  
DTS-ES adds an additional rear center surround channel  
for 6.1 channel sound.  
aCCeSSOrieS  
Remote control  
(AH59-01951K)  
FM antenna  
(AH42-00017A)  
User’s manual  
(AH68-02174S)  
iPod Dock  
(AH97-02650C)  
ASC microphone  
( AH30-00099A )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
2
3
Safety Warnings  
Precautions  
safety information  
2
4
Accessories  
featu4res  
description  
7
7
8
Front Panel  
Rear Panel  
10 Display  
11 Insert Remote Control Batteries  
11 Operation Range of the Remote Control  
12 Tour of the Remote Control  
14 Speaker Positioning  
16 Connecting the Speakers  
17 Connecting the Video Out to your TV  
connections  
14  
18 Connecting External Devices/your TV via  
HDMI  
19 HDMI Function  
20 Connecting a DVD or BD(Blu-Ray) Player  
21 Connecting a Cable, Satellite or Set-top Box  
22 Connecting a VCR  
23 Connecting a CD Player  
24 Connecting 7.1 Channel Devices  
25 Connecting an iPod  
27 Connecting the FM Antenna  
27 Connecting Aux Components  
28 Setup Menu Tree  
32 Input Setup  
setup  
33 Speaker Setup  
37 Surround Setup  
42 Option Setup  
28  
45 Before Using the AV Receiver  
46 Selecting Digital/Analog Input  
47 Using the Surround Modes  
50 Using the Speaker Adjustment Buttons  
51 Listening to the Radio  
operation  
45  
52 Using an iPod  
54 Convenient Functions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
56 Operating Your TV with the Remote Control  
58 Operating Your DVD or BD with the Remote  
Control  
miscellaneous  
56  
59 Troubleshooting  
61 Specifications  
troublesh5oot9ing  
appendix  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description  
frOnt PaneL  
1
2
15  
14  
13  
12  
11 10  
9
8
7
6
5
4
3
STANDBY/ON button  
VOLUME Control  
SELECT button  
Sets the AV receiver to Standby.  
Adjusts the volume level.  
1
2
3
4
Used to change the radio frequency or select detailed options in Surround mode.  
Used to select Manual or Auto mode for FM radio.  
TUNING MODE button  
Used to adjust the bass and treble level.  
TONE CONTROL button  
S.DIRECT button  
5
6
* Also used to return to the previous menu from the SETUP menu.  
Used to output 2 CH PCM audio signal without any signal processing, providing higher audio quality.  
This is useful for obtaining the best sound from a connnected CD player.  
* Also used to select an item in the SETUP menu.  
Toggles to select a surround sound mode.  
SURROUND button  
7.1CH IN button  
FUNCTION button  
7
8
9
* Also used to move the cursor up in the SETUP menu.  
Used to select a connected 7.1 multi channel player  
* Also used to move the cursor down in the SETUP menu.  
Used to select a source (FM, DVD, SAT, TV, VCR, CD, AUX, 7.1 MULTI CH)  
* Also used to move the cursor to the right in the SETUP menu.  
Toggles to select an input mode for the selected source.  
* Also used to move the cursor to the left in the SETUP menu.  
INPUT MODE  
SETUP button  
10  
11  
Displays the SETUP menu where you can select a menu item (INPUT, SPEAKER, SURROUND,  
OPTION).  
ASC MIC JACK  
AUX IN Jack  
Used to connect the ASC MIC for setting up ASC (Auto Sound Calibration).  
Auxiliary AV input terminals used to connect a camcorder, portable DVD player or gaming device.  
Stereo headset input jack.  
12  
13  
14  
15  
HEADPHONE Jack  
POWER button  
Turns the receiver on/off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description  
rear PaneL  
1
2
3
4
5
6
7
8
IPOD  
17  
16 15  
14  
13 12 11 10  
9
FM Antenna JACK  
Connect the FM Antenna here.  
1
2
3
4
5
6
7
8
9
7.1 CH ANALOG AUDIO INPUT JACKS  
VIDEO INPUT JACKS  
Receives the analog audio signal from an external player with a multi-channel port.  
Receives the video signal from a video player (DVD, SAT, TV, VCR).  
Receives digital video and audio signals simultaneously using an HDMI cable.  
Outputs the video signal to the VCR.  
HDMI INPUT JACKS  
VCR VIDEO OUTPUT JACK  
MONITOR OUTPUT JACK  
HDMI OUTPUT JACK  
Outputs the video signal to video devices (TV, Projector etc).  
Outputs digital video and audio signals simultaneously using an HDMI cable.  
Speaker connection terminals  
SPEAKER OUTPUT TERMINALS  
COMPONENT VIDEO OUTPUT JACK  
Outputs the component video signal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPONENT VIDEO INPUT JACKS  
SUBWOOFER AUDIO OUTPUT JACK  
CD AUDIO INPUT JACKS  
Receives the component video signal.  
Connect the subwoofer.  
10  
11  
12  
13  
14  
Receives the audio signal from an audio CD player.  
Outputs the audio signal to a VCR.  
VCR AUDIO OUTPUT JACK  
AUDIO INPUT JACKS  
Receives the audio signal from a video player.  
IPOD INPUT JACK  
Receives the audio/video signal from an iPod.  
15  
COAXIAL INPUT JACK (DIGITAL AUDIO IN) Receives the digital coaxial audio signal.  
16  
17  
OPTICAL INPUT JACKS (DIGITAL AUDIO IN) Receives the digital optical audio signal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DiSPLay  
1
2
3 4  
5
7
6
SPEAKER INDICATORS  
Receives the audio/video signal from an iPod.  
Displays the current listening mode.  
1
2
3
4
5
6
7
LISTENING MODE INDICATORS  
TUNING INDICATORS  
Displays the status of the current radio broadcasting.  
Displays the input signal type of the current audio source.  
Displays the volume level.  
AUDIO INPUT INDICATORS  
VOLUME LEVEL INDICATOR  
RADIO FREQUENCY INDICATOR Displays the current radio frequency range.  
MESSAGE DISPLAY  
Informs you of the status of the receiver.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inSert reMOte COntrOL BatterieS  
1. lift the cover at the back of the  
remote control upward as shown.  
2. install two aaa size batteries.  
Make sure to match the “+” and “–”  
ends of the batteries with the diagram  
inside the compartment.  
3. replace the cover.  
Assuming typical TV usage, the  
batteries last for about one year.  
follow these precautions to avoid leaking or cracking cells:  
M
` Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).  
` Use the correct type of batteries. Batteries that look similar may differ in voltage.  
` Always replace both batteries at the same time.  
` Do not expose the batteries to heat or a flame.  
OPeratiOn range Of tHe reMOte COntrOL  
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a  
horizontal angle of up to 30° from the remote control sensor.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
tOUr Of tHe reMOte COntrOL  
1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER button  
Turns the receiver on/off.  
1
2
3
4
INPUT MODE button  
SLEEP button  
Toggles to select an input mode for the selected source.  
Used to set the Sleep Timer.  
NUMBER buttons  
Used to select a TV channel.  
SPK LEVEL/ SPK SELECT/  
TEST TONE buttons  
Used to select and adjust the level of a desired speaker. Also used to select the Test Tone  
function.  
5
MO/ST button  
Select MONO or STEREO for radio broadcasting.  
Used to set a preset radio frequency.  
6
7
8
TUNER MEMORY button  
VOLUME CONTROL buttons  
Adjusts the volume of the selected device.  
Used to output 2CH PCM audio without any signal processing, providing higher audio quality.  
This is useful for obtaining the best sound from a connected CD player.  
S.DIRECT button  
9
Displays the SETUP menu where you can select a menu item (INPUT, SPEAKER, SURROUND,  
OPTION).  
SETUP/MENU button  
10  
11  
UP/DOWN/LEFT/RIGHT  
buttons  
Used to navigate the menus.  
INFO button  
Displays information on the connected device currently being used.  
Used to select a surround sound mode.  
12  
13  
14  
15  
16  
17  
18  
19  
SURROUND mode buttons  
STEREO button  
Outputs the sound of the selected source in 2 CH stereo.  
Adjusts the brightness of the display.  
DIMMER button  
FUNCTION button  
SELECT DEVICE buttons  
PAUSE button  
Toggles to find and select an input source.  
Select one from the 4 provided sources that you want to control using the remote control.  
Pauses playback on a connected device.  
TUNING MODE button  
Used to select Auto or Manual mode for FM radio.  
EXTERNAL DEVICE  
PLAYBACK buttons  
Used to control playback functions on external devices.  
20  
MUTE button  
Mutes the sound of a connected device.  
Used to change the radio broadcasting frequency or TV channel.  
Used to return to the previous menu from the SETUP menu.  
Used to select an item in the SETUP menu.  
Exits the SETUP menu.  
21  
22  
23  
24  
25  
26  
27  
TUNING/CHANNEL buttons  
RETURN button  
ENTER button  
EXIT button  
ASC button  
Used to set the ASC function.  
FUNCTION selector buttons  
Used to select an input source.  
1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
This section involves various methods of connecting the AV receiver to other  
external components.  
Before moving or installing the product, be sure to turn off the power and  
disconnect the power cord.  
SPeaker POSitiOning  
SL  
SR  
SBL  
SBR  
Position of aV receiver  
Place AV Receiver on a dedicated stand or rack.  
Subwoofer  
The position of the subwoofer is not so critical. Place it  
anywhere you like.  
Subwoofer function  
Active subwoofer with integrated 150W amplifier provides rich  
bass sound.  
~
Connect the SW OUT terminal of the amplifier to the  
INPUT terminal of the subwoofer speaker.  
~
~
Press the POWER button on the rear side of the subwoofer to turn the power on.  
Using the subwoofer’s VOLUME control, you can set the desired bass level  
(See page 35 "Setting the speaker level" to set the subwoofer level in the menu).  
front Speakers  
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.  
Place the speakers so that their tweeters will be at the same height as your ears.  
Align the front face of the front speakers with the front face of the center speaker or place them slightly  
in front of the center speaker.  
1ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPeaker POSitiOning (COntinUeD)  
Center speaker  
It is best to install it at the same height as the front speakers.  
You can also install it directly over or under the TV.  
Surround Speakers  
Place these speakers behind your listening position.  
If there isn't enough room, place these speakers so they face each other.  
Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.  
Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects  
and sound will not come from them all the time.  
SBL SBR  
Surround Back Speakers  
If you are using two rear center speakers, place them facing forward from behind the listening position.  
Place the surround back speaker about 2.3-3.3feet (70 cm to 1 m).  
` When you attach the speakers to a wall, make sure to fasten them tightly so they do not fall off.  
M
Speaker Conguration  
For the best surround-sound experience, you should connect seven speakers and a powered  
subwoofer.  
The following table shows which channels you should use based on the number of speakers you have.  
2 speakers 3 speakers 4 speakers  
5 speakers  
6 speakers  
7 speakers  
SBL  
SBL  
SBR  
` If you’re using only one surround back speaker, connect it to the SURR BACK L terminals.  
M
`
No matter how many speakers you use, a powered subwoofer is recommended for powerful and solid bass.  
1ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting tHe SPeakerS  
FRONT (R)  
FRONT (L)  
CENTER  
ACTIVE SUBWOOFER  
(BUILT-IN POWER AMPLIFIER)  
SURROUND(R) SURROUND  
BACK(R)  
SURROUND SURROUND(L)  
BACK(L)  
(notsupplied)  
AV RECEIVER  
(notsupplied)  
Connecting Speaker Wire  
1. Loosen the knob by turning counterclockwise.  
2. Insert the bare part of the wire into the hole in the side of  
each terminal.  
3. Tighten the knob by turning clockwise to secure the wire.  
` Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects  
into the duct (hole).  
M
` Never touch speaker terminals while the power is on. Doing so could result in electric shock.  
` Make sure the polarities (+ and -) are correct.  
Connecting the Speakers  
1. Press down the terminal tab on the back of the speaker.  
2. Insert the black wire into the black terminal (–) and the red wire into the  
red (+) terminal, and then release the tab.  
3. Connect the connecting plugs to the back of the AV Receiver.  
~
Make sure the colors of the speaker terminals on the back of the  
AV receiver match the colors of the connecting plugs.  
Black  
Red  
1ꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting tHe ViDeO OUt tO yOUr tV  
OPTICAL AUDIO  
OUT OUT  
VIDEO COMPONENT  
IN IN  
Video Connection  
If your television is equipped with Component Video inputs, connect a Component video cable(not  
supplied) from the Component Video Output (PR, PB and Y) jacks on the back of your AV Receiver to the  
Component Video Input jacks on your TV.  
or  
Connect the Video cable from the VIDEO OUT (MONITOR) jack on the back of your AV Receiver to the  
Video Input jack on your TV.  
audio Connection  
Connect the Digital Input (OPTICAL 3) on your AV Receiver to the Digital Output of the TV.  
or  
Connect AUDIO IN (TV) on your AV Receiver to the Audio Out of the TV.  
1ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting eXternaL DeViCeS/yOUr tV Via HDMi  
HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, settop  
box and more.  
HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was  
originally created in the digital source.  
By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio.  
DVD or Blu-RAY Player  
SAT(Cable/Satellite/Set-top box)  
Game console  
TV  
Connect it if you want  
to use Anynet+.  
OPTICAL  
OUT  
High-bandwidth Digital Content Protection System (HDCP) support  
To play digital contents through the HDMI connection, both of the connected external device and TV  
must support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP.  
Compatibility with a TV Supporting HDMI  
A TV with an HDMI jack.  
Video/Audio  
A TV with a DVI-D jack (TV supporting HDCP)  
A TV with a DVI-D jack (TV not supporting HDCP)  
Video  
-
` Audio from SACD discs will not be heard. To play a DVD disc whose copyright is protected by CPPM, use a  
player supporting CPPM.  
M
` The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the  
performance of the connected device.  
` Since HDMI connection supports both video and audio, you don’t have to connect an additional audio cable.  
1ꢆ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMi fUnCtiOn  
Using anynet+(HDMi-CeC)  
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's  
remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an  
HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.  
1. Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 18)  
2. Set the Anynet+ function on your TV.  
(See the TV instructions manual for more information.)  
~
You can operate the volume on the AV receiver by using Volume buttons on the TV remote  
control.  
if you select the tV  
Set the Anynet+(HDMI-CEC) to On by pressing the Anynet+ button on your TV.  
~
~
receiver : On : You can listen to audio through the AV Receiver.  
receiver : Off : You can listen to audio through the TV.  
MOVE ENTER  
EXIT  
if you select the DVD Player  
Select THEATER to connector and set the option of each item below.  
~
View tV : If Anynet+(HDMI-CEC) set to on and you select View TV,  
the AV receiver will automatically switch to SAT  
OPTIC2(DIGITAL IN).  
~
~
receiver : On : You can listen to audio through the AV receiver.  
receiver : Off : You can listen to audio through the TV.  
MOVE ENTER  
EXIT  
to turn off anynet+  
1. Press SETUP/MENU button, and then press the ENTER button.  
~
“SETUP MODE” appears on the display and goes into Setup Mode.  
2. Press ◀▶ button to select the “ANYNET+ MODE”, and then press the enter button.  
ꢁ. Press the ▲▼button to set ANYNET+ to OFF.  
- If you are using Anynet+, set ANYNET+ to ON and if not, set it to OFF.  
- to exit setup mode-  
~
Press setup/menu, exit or return button.  
“SETUP OFF” appears on the display and Setup Mode is exited.  
` If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV receiver using  
the TV’s remote control. This function is available only in connection with Samsung TV and DVD player  
supporting Anynet +(HDMI-CEC).  
M
` Please check your TV for the n logo. If your TV has an n logo, then it supports the Anynet+  
function.  
` When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+ installed).  
Otherwise, it can cause a malfunction.  
` Anynet+ does not work if the function is set to iPod AUDIO.  
1ꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting a DVD Or BD(Blu-ray) PLayer  
DVD or BD Player  
OPTICAL AUDIO  
OUT OUT  
VIDEO COMPONENT  
OUT OUT  
IN IN  
or  
or  
or  
Video Connection  
Connect a Component video cable(not supplied) from the COMPONENT IN (DVD) (PR, PB and Y) jacks  
on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player.  
or  
Connect a Video cable from the VIDEO IN (DVD) jack on the back of your AV Receiver to the Video  
Output jack on your DVD/BD player.  
audio Connection  
Connect the Digital Input (OPTICAL 1) on your AV Receiver to the Digital Output of the DVD/BD player.  
or  
Connect AUDIO IN (DVD) on your AV Receiver to the Audio Out of the DVD/BD player.  
ꢀ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting a CaBLe, SateLLite Or Set-tOP BOX  
SAT(Cable/Satellite/Set-top box)  
OPTICAL AUDIO  
OUT OUT  
VIDEO COMPONENT  
OUT OUT  
IN IN  
or  
or  
or  
Video Connection  
Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (PR, PB and Y) jacks  
on the back of your AV Receiver to the Component Video Output jacks on your SAT.  
or  
Connect a Video cable from the VIDEO IN (SAT) jack on the back of your AV Receiver to the Video  
Output jack on your SAT.  
audio Connection  
Connect the Digital Input (OPTICAL 2) on your AV Receiver to the Digital Output of the SAT.  
or  
Connect AUDIO IN (SAT) on your AV Receiver to the Audio Out of the SAT.  
` Disconnect the power plug from the outlet if you will not use this unit for a long period of time.  
M
` If the external component has only one audio output jack, connect it to either the right or left audio input jack  
of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.  
` If your use the AV Receiver to control your DVD/BD player, the pause function will not work.  
ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting a VCr  
VCR  
AUDIO  
OUT  
VIDEO  
OUT  
VIDEO  
IN  
AUDIO  
IN  
IN  
(For playback)  
(For recording)  
Video Connection  
for playback  
Connect a Video cable from the VIDEO IN (VCR) jack on the back of your AV Receiver to the Video  
Output jack on your VCR.  
for recording  
Connect a Video cable from the VIDEO OUT (VCR) jack on the back of your AV Receiver to the Video  
Input jack on your VCR.  
audio Connection  
for playback  
Connect AUDIO IN (VCR) on your AV Receiver to the Audio Out of the VCR.  
for recording  
Connect AUDIO OUT (VCR) on your AV Receiver to the Audio In of the VCR.  
` Disconnect the power plug from the outlet if you will not use this unit for a long period of time.  
M
ꢀꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting a CD PLayer  
CD player  
AUDIO  
OUT  
COAXIAL  
OUT  
or  
audio Connection  
Connect the Digital Input (COAXIAL) on your AV Receiver to the Digital Output of the CD Player.  
or  
Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player.  
` If the external component has only one audio output jack, connect it to either the right or left audio input jack  
of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.  
M
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting 7.1 CHanneL DeViCeS  
You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 7.1 channel output.  
SW  
C
SW  
C
FRONT  
SURROUND  
SUB  
WOOFER  
CENTER  
SURROUND  
BACK  
5.1 CH  
7.1 CH  
7.1 Channel device  
ꢀꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting an iPod  
You can listen to the audio from an iPod through the main unit. For iPod operation with your receiver, see pages 26  
and 54 ~ 55.  
IPOD  
1. Connect the iPod dock connector to the iPod jack on your reciever.  
ꢀ. Place the iPod in the Dock.  
~
If you want to play a movie stored in your iPod player, you should set the player's tV Out option to  
On before inserting it into the dock. See page 53.  
ꢁ. Press the iPOD button on the remote control.  
~
You can also use the fUnCtiOn button on the main unit.  
The mode switches as follows :  
fM DVD Sat tV VCr CD aUX 7.1 MULti CH iPOD aUDiO  
iPOD ViDeO.  
Disconnecting an iPod  
Follow the steps below to prevent damage to an iPod and data when disconnecting from your  
AV receiver.  
1. Press the fUnCtiOn button on the main unit to switch to a mode other than iPOD aUDiO or  
iPOD ViDeO.  
OR  
1. Turn off the AV Receiver.  
2. Disconnect the iPod player from the iPod dock, or remove the iPod dock connector from the AV  
receiver.  
`
You must have the VIDEO (Monitor or VCR) output connected to your TV to view iPod video.  
See page 22.  
M
` Adjust the volume to a moderate level before you connect your iPod and AV Receiver.  
` When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery.  
` Make sure to connect the dock connector so that the label “SaMSUng” faces upward.  
` “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has  
been certified by the developer to meet Apple performance standards.  
ꢀꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting an iPod (Continued)  
iPod models that are compatible with Ht-aS730S  
`
`
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been  
certified by the developer to meet Apple performance standards.  
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.  
M
iPod is a trademark of apple inc., registered in the U.S. and other countries.  
ꢀꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCting tHe fM antenna  
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.  
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or  
other rigid surface.  
FM antenna (supplied)  
M
` Do not place the antenna cable close to the power cord. Keep it as far away as possible.  
` If you experience poor FM reception, use an external antenna.  
COnneCting aUX COMPOnentS  
You can connect external devices you use for a short time (camcorder, game console, mobile equipment,etc.) to  
the front of this unit for convenience.  
AUDIO  
VIDEO  
OUT  
OUT  
Camcorder  
ꢀꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
For your convenience, you can set this AV receiver's features for the best use.  
SetUP MenU tree  
Here’s a quick look at how the setup menus are organized on your AV Receiver.  
INPUT  
DVD  
OPTICAL 1,2,3  
OPTICAL 1,2,3  
OPTICAL 1,2,3  
OPTICAL 1,2,3  
OPTICAL 1,2,3  
COAXIAL  
COAXIAL  
COAXIAL  
COAXIAL  
COAXIAL  
SAT  
TV  
CD  
AUX  
SPEAKER  
SURROUND  
OPTION  
ꢀꢆ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SetUP MenU tree (Continued)  
INPUT  
SPEAKER  
SPEAKER SIZE  
FRONT  
LARGE  
LARGE  
LARGE  
LARGE  
ON  
SMALL  
SMALL  
SMALL  
SMALL  
OFF  
CENTER  
SURROUND  
NONE  
NONE  
NONE  
SURROUND BACK  
SUBWOOFER  
CROSS OVER  
60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz, 200Hz  
SPEAKER DISTANCE  
FRONT LEFT  
FRONT RIGHT  
CENTER  
SURROUND LEFT  
SURROUND RIGHT  
SURROUND BACK LEFT  
SURROUND BACK RIGHT  
SUBWOOFER  
1 ~ 30 feet (1 foot steps) , default : 10 feet  
SPEAKER LEVEL  
FRONT LEFT  
FRONT RIGHT  
CENTER  
SURROUND LEFT  
SURROUND RIGHT  
SURROUND BACK LEFT  
SURROUND BACK RIGHT  
SUBWOOFER  
-10.0 ~ +10.0dB (1dB step) , default : 0dB  
TEST TONE  
AUTO  
MANUAL  
SURROUND  
OPTION  
ꢀꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SetUP MenU tree (Continued)  
INPUT  
SPEAKER  
SURROUND  
STEREO  
STEREO  
MULTI CH STEREO  
PL IIx  
MODE  
Movie  
OFF  
Music  
ON  
Game  
Matrix  
PL  
PANORAMA  
DIMENSION  
CENTER WIDTH  
-7 ~ STD ~ +7  
0 ~ 7  
SFE  
HALL1  
ROCK  
MOVIE  
HALL2  
CLASSIC  
JAZZ CLUB  
LIVE  
CHURCH  
GAME  
NEO:6  
NEO:6 MODE  
MUSIC  
CINEMA  
CENTER IMAGE  
0 ~ 7  
EX/ES  
AUTO  
OFF  
ON  
TONE CONTROL  
TONE SET  
BASS  
OFF  
ON  
-6dB ~ +6dB (1dB Step)  
-6dB ~ +6dB (1dB Step)  
TREBLE  
OPTION  
ꢁ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SetUP MenU tree (Continued)  
INPUT  
SPEAKER  
SURROUND  
OPTION  
A/V Sync  
Delay  
0 ~ 200mS (10mS Step)  
MP3 ENHANCER  
SMART VOLUME  
OFF  
OFF  
ON  
ON  
ASC SETUP  
DRC  
Auto Setup  
Max  
Std  
Min  
HDMI SETUP  
AUTO LIPSYNC  
HDMI Audio  
Anynet+  
ON  
AVR  
On  
OFF  
TV  
Off  
ꢁ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inPUt SetUP  
Selecting a source device and connection jack  
Select the external devices you have connected to the receiver.  
1. Press SETUP/MENU button  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press the ▶ button to select a desired device.  
3. Press the or button to select a desired jack.  
- to exit setup mode -  
~
Press setup/menu, exit or return button.  
“SETUP OFF” appears on the display and Setup Mode is exited.  
- Digital audio input Select -  
INPUT JACK  
AUDIO  
Default  
SOURCE DEVICE  
OPTIC1,2,3,COAX  
OPTIC1,2,3,COAX  
OPTIC1,2,3,COAX  
OPTIC1,2,3,COAX  
OPTIC1,2,3,COAX  
DVD  
SAT  
TV  
OPTIC1  
OPTIC2  
OPTIC3  
COAX  
CD  
AUX  
OPTIC1  
`
`
You can also use SETUP,  
Receiver.  
,
,
,
,
(ENTER), (RETURN) and  
(EXIT) buttons on the front of your AV  
M
To move up one level from SETUP/MENU or EXIT SETUP when the SETUP mode is released, press the RETURN  
button.  
ꢁꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPeaker SetUP  
Setting the speaker size  
Signal outputs and frequency response from the speaker will be  
adjusted according to your speaker configuration and whether certain  
speakers are used or not.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display.  
2. Press ▲▼ button to select “SPEAKER”, and then press the  
ENTER.  
3. Press ▲▼ button to select “SPK SIZE”, and then press the  
ENTER or  
button.  
4. Press ◀▶ button to select the speaker you want.  
~
Each time you press this button, FRONTCEN SURR   
S.BACK S.W CROVR will be selected in turn.  
5. Press ▲▼ button to set the mode (LARGE, SMALL etc.) for  
the selected speaker.  
6. Repeat steps 3-4 to set the mode for each speaker.  
- to exit setup mode -  
~
Press setup/menu, exit or return button.  
“SETUP OFF” appears on the display and Setup Mode is exited.  
Setting the Speaker  
SPEAKER  
FRONT(Front)  
Possible Settings  
LARGE, SMALL  
Default Setting  
SMALL  
SMALL  
SMALL  
SMALL  
ON  
CEN(Center)  
LARGE, SMALL, NONE  
LARGE, SMALL, NONE  
LARGE, SMALL, NONE  
ON, OFF  
SURR(Surround)  
S.BACK (Surround Back)  
SUB(Subwoofer)  
CROVR (Crossover Frequency)  
60, 80, 100,120, 150, 180, 200(Hz)  
150Hz  
~
~
~
~
~
~
LARGE : Select when using large speakers. You can listen to full range sound.  
SMALL : Select this when using small speakers  
NONE : Select when no speaker is used  
ON (subwoofer) : Select when using the subwoofer speaker.  
OFF (subwoofer) : Select when not using the subwoofer speaker.  
CROVR : Select the crossover frequency for the best bass response in your room.  
ꢁꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPeaker SetUP (Continued)  
Setting the speaker listening distance  
If the speakers cannot be placed at equal distances from the listening  
position, you can adjust the delay time of the audio signals from the  
center and surround speakers.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select "SPEAKER", and then press the  
ENTER.  
3. Press ▲▼ button to select "SPK DISTANCE", and then press  
the ENTER or  
button.  
4. Press ◀▶ button to select the speaker you want.  
~
Each time you press this button, F.L F.RCEN S.L  
S.R SBL SBR S.W will be selected in turn.  
5. Press ▲▼ button to set the speaker distance.  
~
For FRONT LEFT, FRONT RIGHT, CENTER, SURR. LEFT,  
SURR. RIGHT, SURR. BACK LEFT, SURR. BACK RIGHT,  
SUBWOOFER Speaker, you can set the distance from the speaker to listening position between  
1ft ~ 30ft (0.3~9.0m) in intervals of 1ft (0.3m).  
- to exit setup mode -  
~
Press setup/menu, exit or return button.  
“SETUP OFF” appears on the display and Setup Mode is exited.  
- Setting Speaker Distance -  
Set the distance from the speaker to listening position in intervals of 1ft(0.3m).  
F.L (front left) : 1ft ~ 30ft  
CEN (center) : 1ft ~ 30ft  
• F.R (front right) : 1ft ~ 30ft  
• S.R (surround right) : 1ft ~ 30ft  
• SBL (surround back left) : 1ft ~ 30ft  
• SW (subwoofer) : 1ft ~ 30ft  
• SBR (surround back right) : 1ft ~ 30ft  
• S.L (surround left) : 1ft ~ 30ft  
`
`
`
If the listening position is beyond the range of the speaker distance setup, set the speaker  
distance to the maximum.  
M
The distance range of the overall speaker system is determined based on the F.L(front left)  
speaker distance from the listening position.  
Based on the max delay channel, the distance of the front speaker is 4.9ft(5ms) and the  
surround speaker can be set up to 14.7ft(15ms).  
ꢁꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPeaker SetUP (Continued)  
Setting the speaker level  
You can set the balance and level of speakers.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select "SPEAKER", and then press the  
ENTER.  
3. Press ▲▼ button to select "SPK LEVEL", and then press the  
ENTER or  
button.  
4. Press ◀▶ button to select the speaker you want.  
~
Each time you press this button, F.L F.RCEN S.L  
S.R SBL SBR S.W will be selected in turn.  
5. Press ▲▼ button to set the speaker mode.  
~
~
You can adjust it from -10 to +10dB in 1 step increments.  
The sound gets quieter at -10dB and louder at +10dB.  
- to exit setup mode -  
~
Press setup/menu, exit or return button.  
“SETUP OFF” appears on the display and Setup Mode is exited.  
Setting Speaker Level  
• F.L (front left) : -10 ~ +10dB  
• F.R (front right) : -10 ~ +10dB  
• CEN (center) : -10 ~ +10dB  
• S.L (surround left) : -10 ~ +10dB  
• S.R (surround right) : -10 ~ +10dB  
• SBL (surround back left) : -10 ~ +10dB  
• SBR (surround back right) : -10 ~ +10dB  
• S.W (subwoofer) : -10 ~ +10dB  
ꢁꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPeaker SetUP (Continued)  
Setting the test tone  
Use the test tone to check the speaker connection status or level.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select "SPEAKER", and then press the  
ENTER.  
3. Press ▲▼ button to select "TEST TONE", and then press the  
ENTER or  
4. Press ▲▼ button to select the option you want, and then  
press the ENTER or button.  
aUtO : Test signal will be automatically output as follows;  
button.  
~
~
F.L CEN S.W F.R S.R SBR SBL S.L.  
- During test tone output, press ▲▼ button to adjust the  
speaker output level from -10 to +10 dB  
by 1 step.  
ManU (MANUAL): Enables you to adjust the output level of the speaker manually.  
1) Press ◀▶ button to select the speaker you want.  
Each time you press ◀▶ button, F.L CEN S.W F.R S.R SBR SBL S.L will  
be selected in turn.  
2) Press ▲▼ button to set the test tone as you want.  
You can adjust the speaker output level from -10 to +10dB by 1 step.  
The sound gets quieter at -10dB and louder at +10dB.  
test tone Output  
F.L (front left) : -10 ~ +10dB  
• CEN (center) : -10 ~ +10dB  
• S.W (subwoofer) : -10 ~ +10dB  
• F.R (front right) : -10 ~ +10dB  
• S.R (surround right) : -10 ~ +10dB  
SBR (surround back right) : -10 ~ +10dB  
• SBL (surround back left) : -10 ~ +10dB  
• S L (surround left) : -10 ~ +10dB  
- to stop test tone -  
~
Press SETUP/MENU or exit button once time.  
“SETUP OFF” appears on the display and test tone stops.  
ꢁꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUrrOUnD SetUP  
Setting the stereo mode  
You can select this mode when listening to sound through the front left  
and right speakers and subwoofer.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select "SURROUND", and then press the  
ENTER.  
3. Press ▲▼ button to select "STEREO", and then press the  
ENTER or  
button.  
4. Press ▲▼ button to set STEREO mode you want.  
~
~
StereO:2CH : Select this for 2 CH stereo output.  
StereO:MULti : Select this for Multi-CH output.  
- to exit setup mode -  
~
Press setup/menu, exit or return button.  
“SETUP OFF” appears on the display and Setup Mode is exited.  
ꢁꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUrrOUnD SetUP (Continued)  
Setting Dolby Pro Logic ii X mode  
This mode provides 7.1 channel sound from 2 channel sources.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select "SURROUND", and then press the  
ENTER.  
3. Press ▲▼ button to select "PL II x", and then press the  
ENTER or  
4. Press ▲▼ button to select the option you want, and then  
press the ENTER or button.  
~ MODe : Each time you press ▲▼ button, MOVIE MUSIC  
button.  
GAME MATRIX PL will be selected in turn.  
MOVie : Adds realism to the movie soundtrack.  
MUSiC : Provides 7.1 channel surround sound for digital,  
analog or existing stereo sources such as CD,  
TAPE, FM, TV and stereo VCR.  
gaMe : Enhances the excitement of the game’s sound.  
MatriX : You will hear 7.1 channel surround sound.  
PL : You will experience a surround effect with just the front  
left and right speakers.  
~
PanOraMa : You can set it ON or OFF.  
(This mode extends the front stereo image to include the  
surround speakers for an exciting "wraparound" effect with side wall imaging.)  
~
~
DiMenSiOn : You can set from -7 to +7.  
(Incrementally adjusts the sound field (DSP)from the front or surround.)  
Center WiDtH : You can set from 0 to 7.  
(This sets the width of the center image. The higher the setting, the less sound comes from the  
center speaker.)  
`
PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to  
"MUSIC".  
M
`
`
You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital and DTS.  
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or  
48KHz.  
`
Sound will not be output from the surround back speakers if the PCM audio signal is mono.  
ꢁꢆ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUrrOUnD SetUP (Continued)  
Setting Sfe(Sound field effect) mode  
The SFE (Sound Field Effect) function uses 9 different DSP sound field  
effects to digitally simulate actual music environments such as concert  
halls or cinemas.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select "SURROUND", and then press the  
ENTER.  
3. Press ▲▼ button to select "SFE", and then press the ENTER  
or  
button.  
4. Press ▲▼ button to set the Sound Field Effect you want.  
~
Each time you press the button, HALL 1HALL 2 JAZZ  
CLUB CHURCH ROCK CLASSIC LIVE GAME  
MOVIE will be selected in turn.  
Setting neO:6 mode  
You can play back 2 channel sound over 6.1 channels when enjoying  
music or a movie.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select "SURROUND", and then press the  
ENTER.  
3. Press ▲▼ button to select "NEO:6", and then press the  
ENTER or  
button.  
4. Press ▲▼ button to set the NEO:6 mode you want.  
~
neO:6 MODe : Each time you press ▲▼ button, MUSIC  
CINEMA will be selected in turn.  
This mode decodes 2 channel signals to a high precision  
digital matrix decoder for 6.1 channel sound.  
MUSiC : NEO:6 MUSIC mode is optimized for music  
playback  
CineMa : NEO:6 CINEMA mode is optimized for movie  
playback.  
~
Center iMage : Press ▲▼ button to set the sound image you want.  
You can set the sound image from 0 to 7  
This parameter adjusts the height of the center image through the front and center speakers. “0”  
is the lowest while “7” is the highest.  
- to exit setup mode-  
~
Press setup/menu, exit or return button.  
“SETUP OFF” appears on the display and Setup Mode is exited.  
`
`
NEO:6 mode cannot be used with DTS and Dolby Digital multi channel signals.  
M
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or  
48KHz.  
ꢁꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUrrOUnD SetUP (Continued)  
Setting eX/eS mode  
When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound using the built-in  
Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a  
DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select "SURROUND", and then press the  
ENTER.  
3. Press ▲▼ button to select the “EX / ES”, and then press the  
ENTER or  
“EX/ES : AUTO” appears on the display.  
4. Press ▲▼ button to set the EX/ES you want.  
button.  
~
~
aUtO : If the unit receives an audio signal that it can  
recognize, it will select an optimal decoder for playback in  
6.1/7.1 channel.  
If the amplifier does not recognize the audio signal, it will not  
play in 6.1/7.1 channel automatically.  
~
~
On : Dolby Digital or DTS signal will be played in 6.1 / 7.1  
channel using Dolby Digital Surround EX / DTS ES decoder.  
Off : Dolby Digital Surround EX / DTS ES decoder will not be used for playback.  
- to exit setup mode-  
~
Press setup/menu, exit or return button.  
“SETUP OFF” appears on the display and Setup Mode is exited.  
Dolby Digital - eX  
Movie soundtracks encoded with Dolby Digital EX will play audio over the surround back channels also.  
DtS-eS (Discrete 6.1, Matrix 6.1)  
A surround back channel is added to the DTS 5.1 channel system, improving the sense of sound  
directionality and space.  
A built-in DTS-ES decoder has been equipped with this system that supports discs encoded with DTS-  
ES Direct and DTS-ES Matrix.  
`
`
You cannot use DTS-ES without surround back speakers connected.  
M
If the input source is in DTS 96/24, you will hear only 5.1 CH sound even if you have set EX/ES to  
On.  
ꢂ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUrrOUnD SetUP (Continued)  
Setting tone Control  
This will enable you to adjust the bass and treble level.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select "SURROUND", and then press the  
ENTER.  
3. Press ▲▼ button to select "TONE CONTROL", and then  
press the ENTER or  
button.  
3. Press ▲▼ button.  
~
Each time you press this button, TONE SET BASS   
TREBLE will be selected in turn.  
~
If it is set to TONE: OFF, the Tone Control function will be  
disabled..  
5. Press ▲▼ button to set the TONE CONTROL you want.  
~
~
You can adjust it from -6 to +6dB by 1 step.  
The sound gets smaller at -6dB and louder at +6dB.  
- to exit setup mode -  
~
Press setup/menu, exit or return button.  
“SETUP OFF” appears on the display and Setup Mode is exited.  
`
`
The Tone Control function can be applied to all channels except for the subwoofer.  
You can also press TEST TONE button on the remote control to use this function.  
M
ꢂ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPtiOn SetUP  
The Option menu enables you to make different audio settings to enhance your AV receiver experience.  
1. Press SETUP/MENU button.  
~
“INPUT” appears on the display and goes into Setup Mode.  
2. Press ▲▼ button to select the “OPTION”, and then press the ENTER.  
3. Press ▲▼ ◀▶ button to set the OPTION you want.  
aV SynC  
Video may look slower than the audio if it is connected to a  
digital TV. If this occurs, adjust the audio delay time to match the  
video.  
~
You can adjust it from 0 to 200mS in 10mS steps.  
MP3 enhancer  
This also helps enhance your sound experience (ex. mp3  
music). Use this if you want to hear better sound from a low  
quality mp3 source.  
~
~
on  
off  
Smart Volume  
This will regulate and stabilize the volume level against a drastic  
volume change when changing channels or during a scene  
transition.  
~
~
off  
on  
`
To move up one level from SETUP/MENU or EXIT SETUP when the SETUP mode is released, press the RETURN  
button.  
M
ꢂꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPtiOn SetUP (Continued)  
aSC (auto Sound Calibration)  
By setting the ASC function just once when you relocate or install the unit, you can have the unit  
automatically recognize the distance between speakers, levels between channels, and frequency  
characteristics to create a 7.1-channel sound field optimized for your environment.  
1. Plug the ASC microphone into the ASC input jack.  
2. Place the ASC microphone at the listening position.  
ꢁ. Press SETUP/MENU button.  
ꢂ. Press ▲▼ button to select the “OPTION”, and then press the  
ENTER or  
ꢃ. Press ▲▼ button to select the “ASC SETUP”, and then press  
the ENTER or button.  
ꢄ. Press the ENTER or ▶ button to select the “ASC AUTO”, and  
then press the ENTER or button.  
To create the optimal 7.1 channel sound field, the selections  
button.  
~
are in the following sequence:  
L C r Sr SBr SBL SL SW  
ꢅ. If you see a message of "READY" on the screen, press the enter button to apply the  
measurement value. And then unplug the ASC microphone.  
ASC  
Microphone  
to cancel the aSC (auto Sound Calibration) setup.  
This will be automatically reverted if you press the SETUP/MENU, eXit or retUrn button.  
` Setting the ASC function takes about 3 minutes.  
` Because the volume level of the tone is fixed during the ASC setup, you cannot adjust the volume using the  
volume control buttons.  
M
` If the auto sound microphone is disconnected during the ASC setup, the setup will be cancelled.  
`
`
`
When ASC measuring is done with a message of "READY" on the screen, The measurement value will not apply  
until you press the ENTER button .  
To move up one level from SETUP/MENU or EXIT SETUP when the SETUP mode is released, press the RETURN  
button.  
You can also press ASC button on the remote control to use this function.  
ꢂꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPtiOn SetUP (Continued)  
DrC  
You can use this function to enjoy Dolby Digital sound when  
watching movies at low volume at night.DRC compresses the  
audio to make the loudest sounds quieter and the quietest  
sounds louder.  
~
Each time you press ▲▼ button, DRC : STD DRC : MIN   
DRC : MAX will be selected in turn.  
Setting DrC  
~
~
~
STD : Sets DRC effect to standard.  
MAX : Sets DRC effect to maximum.  
MIN : Sets DRC effect to minimum.  
HDMi Setup  
Use this if you want to transfer audio signal using the HDMI cable.  
1. HDMI Audio : AVR, TV  
This preference determines whether audio received at the HDMI IN is output by the HDMI OUT. You  
may want to turn this preference on if your TV is connected to the HDMI OUT and you want to listen  
to the audio from a component that’s connected to an HDMI IN, through your TV’s speakers.  
Normally, this should be set to Off.  
- AVR : HDMI audio is not output  
- TV : HDMI audio is output  
ꢀ. Anynet + Mode : Off, On  
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's  
remote control.  
- On : Anynet + enabled.  
- Off : Anynet - disabled.  
ꢁ. AUTO LIPSYNC : ON, OFF  
The AV receiver can be set to automatically correct any delay between the video and the audio,  
based on the data from the connected monitor.  
- ON : HDMI lip sync enabled.  
- OFF : HDMI lip sync disabled.  
`
`
HDMI Audio is enabled only if both of HDMI INPUT and HDMI OUT are connected properly and work normally.  
To move up one level from SETUP/MENU or EXIT SETUP when the SETUP mode is released, press the RETURN  
button.  
M
`
This function works only if your HDMI-compatible TV supports HDMI Lip Sync.  
ꢂꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
BefOre USing tHe aV reCeiVer  
turning On/Off  
Connect the power plug to the outlet.  
Press the POWER button of the remote control.  
~
This unit will be turned on or set to Standby mode.  
remote control functions  
You can operate your AMP (this AV receiver), TV, DVD and BD player  
with this remote control.  
See pages 56 ~ 58 for more details.  
to select a function  
Method 1  
Press the Function button.  
~
Each time you press this button, fM DVD Sat tV VCr   
CD aUX 7.1 MULti CH iPOD will be selected in turn.  
Method 2  
Press DVD/BD, SAT, TV, VCR, CD, AUX, 7.1CH, IPOD or TUNER button.  
~
You can directly select the desired function.  
ꢂꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SeLeCting DigitaL/anaLOg inPUt  
You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit.  
Press the INPUT MODE button on the remote control to select the external device  
you have connected.  
~
Each time you press this button, input mode changes as follows:  
for DVD/Sat function  
or  
for CD function  
for aUX function  
M
` You can also change input mode by pressing the INPUT MODE button on the front of your AV Receiver.  
` You can change the detailed input setting in the “INPUT” setup. (See page 32)  
` You can enjoy Dolby Digital or DTS if you connect the digital audio output jack of an external audio component to the optical  
or coaxial digital audio input jack on the main unit.  
ꢂꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USing tHe SUrrOUnD MODeS  
Using the neO:6 MODe button  
Press neo:6 mode button.-  
~
Each time you press this button, MUSICCINEMA will be selected in  
turn.  
Using the Sfe MODe button  
Press sfe mode button.  
~
Each time you press this button, HALL 1HALL 2 J.CLUB   
CHURCH ROCK CLASSIC LIVE GAME will be selected in  
turn.  
Using the  
MODe button  
Press  
MODE button.  
~
Each time you press this button, MOVIE MUSIC GAME   
MATRIX PL will be selected in turn.  
Using the  
effeCt button  
1. Press  
MODE button to select ‘MUSIC’ Mode.  
2. Press  
EFFECT button  
~
Each time you press this button, C-WIDTH DIMENSION   
PANORAMA will be selected in turn.  
3. Press ▲▼ button to select Dolby Pro Logic IIx effect you want.  
~
~
~
C-WiDtH : You can set from 0 to 7.  
DiMenSiOn : You can set from -7 to +7.  
PanOraMa : You can set it ON or OFF.  
Using the StereO button  
Press stereo button.  
~
Outputs the sound of the selected source device in 2 CH stereo.  
ꢂꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USing tHe SUrrOUnD MODeS (Continued)  
Using the SUrrOUnD button on the front of the main unit  
selecting the neo:6 mode  
1. Press SURROUND button briefly to select “NEO:6” mode.  
~
Each time you press this button, STEREO PLIIx NEO:6 SFE will be selected in turn.  
2. Press SELECT ( .,, ) button.  
Each time you press this button, MUSIC CINEMA will be selected in turn.  
~
selecting the sfe mode  
1. Press SURROUND button to select ‘SFE’ Mode.  
~
Each time you press this button, STEREO PLIIx NEO:6 SFE will be selected in turn.  
2. Press SELECT( .,, ) button.  
~
Each time you press SELECT ( .,, ) button,  
HALL 1HALL 2 J.CLUB CHURCH ROCK CLASSIC LIVE GAME will be  
selected in turn.  
selecting the pliix mode  
1. Press SURROUND button to select “PLIIx” mode.  
~
Each time you press this button, STEREO PLIIx NEO:6 SFE will be selected in turn.  
2. Press SELECT( .,, ) button.  
~
Each time you press SELECT ( .,, ) button, MOVIE MUSIC GAME MATRIX PL will  
be selected in turn.  
`
`
You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital and DTS.  
M
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or  
48KHz.  
`
Sound will not be output from the surround back speaker if the PCM audio signal is mono.  
selecting the stereo mode  
Press SURROUND button to select “STEREO” mode.  
~
Each time you press this button, STEREO PLIIx NEO:6 SFE will be selected in turn.  
ꢂꢆ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USing tHe SUrrOUnD MODeS (Continued)  
Surround Mode and input Signal Chart  
o = active, – = inactive  
Output Channel  
Display Information  
Surround Mode  
Input Signal  
Decoding  
SL SBL  
SR SBR  
Display Signal  
Format  
L/R  
C
SubW  
Channel Status  
Dolby D Surr. EX  
Dolby D (5.1ch)  
Dolby D (2ch)  
Dolby D (2ch Surr)  
L.PCM (Audio)  
Analog  
Dolby Digital 5.1  
Dolby Digital 5.1  
Pro Logic II x  
Pro Logic II x  
Pro Logic II x  
Pro Logic II x  
Neo:6  
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
DIGITAL  
DIGITAL  
DIGITAL  
DIGITAL  
L.PCM  
Analog  
L.PCM  
Analog  
DIGITAL  
DIGITAL  
DIGITAL  
DIGITAL  
L.PCM  
Analog  
DIGITAL  
DIGITAL  
dts, ES  
dts  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SW  
DOLBY  
(MUSIC,  
CINEMA,  
MATRIX,  
GAME,  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, C, R, SL, SR, SBL, SBR, SW  
L, R, SW  
PRO LOGIC)  
L.PCM (Audio)  
Analog  
NEO:6  
(MUSIC,  
CINEMA)  
Neo:6  
Dolby D (2ch)  
Dolby D (2ch Surr)  
Dolby D (2ch)  
Dolby D (2ch Surr)  
L.PCM (Audio)  
Analog  
Neo:6  
Neo:6  
DD+SFE  
DD+SFE  
SFE  
SFE  
SFE  
Dolby D Surr. EX  
Dolby D (5.1ch)  
DTS-ES  
Dolby Digital EX  
Dolby Digital EX  
DTS-ES  
EX/ES  
DTS (5.1ch)  
DTS-ES  
Dolby D (2ch)  
Dolby D (2ch Surr)  
L.PCM (Audio)  
L.PCM 96KHz  
Analog  
Stereo  
DIGITAL  
DIGITAL  
L.PCM  
L.PCM  
Analog  
Stereo  
L, R, SW  
STEREO  
Stereo  
L, R, SW  
Stereo  
L, R, SW  
Stereo  
L, R, SW  
~
L/R : front speaker (left/right)  
C : center speaker  
SL/SR : surround speaker (left/right)  
SBL/SBR : surround back speaker (left/right)  
SW : subwoofer  
`
`
Channel status displays are dependent on the speaker configuration.  
SFE mode works with 2-ch signals.  
M
ꢂꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USing tHe SPeaker aDJUStMent BUttOnS  
Using the SPk SeLeCt button  
1. Press spK select button to select the speaker you want.  
~
Each time you press this button, FRONTCEN SURR   
S.BACK S.W CROVR SPK MODE OFF will be selected  
in turn  
2. Press ▲▼ button to set the mode (Large, Small etc.) for the selected  
speaker.  
~
Repeat steps 1-2 to set the mode for each speaker.  
Using the SPk LeVeL button  
1. Press SPK LEVEL button to select the speaker you want.  
~
Each time you press this button, F.L F.RCEN S.L S.R  
SBL SBR S.WSPK LVL OFF will be selected in turn.  
2. Press ▲▼ button to set the speaker level you want.  
~
~
You can adjust it from -10 to +10dB by 1 step.  
The sound gets quieter at -10dB and louder at +10dB.  
Using the test tone button  
Press TEST TONE button.  
~
Test signal will be automatically output as follows; F.L CEN S.W  
F.R S.R SBR SBL S.L  
~
During test tone output, press ▲▼ button to adjust the speaker output  
level from -10 to +10 dB in 1 step increments.  
ꢃ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LiStening tO tHe raDiO  
You can listen to the radio by using either automatic or manual tuning.  
1. Press TUNER button.  
2. Selected frequency.  
~
~
~
Automatic tuning 1 :  
1) Press TUNING MODE button to select PRESET.  
2) Press TUNING/CH ( .,, ) button to select the preset frequency.  
Automatic tuning 2 :  
1) Press TUNING MODE button to select MANUAL  
2) Press and hold TUNING/CH ( .,, ) button to automatically tune in frequency.  
Manual tuning :  
1) Press TUNING MODE button to select MANUAL.  
2) Press TUNING/CH ( .,, ) button briefly to increase or decrease the frequency step by step.  
`
You can also select FM by pressing the FUNCTION button on the front of your AV Receiver.  
M
to Listen to mono/stereo  
Press MO/ST button on the remote.  
~
~
~
Each time you press this button, STEREO › MONO will be selected in turn.  
If you select MONO in an area with weak reception, it will help to reduce noise.  
This function works only with the Remote Control.  
Presetting radio stations  
You can preset up to 30 FM stations.  
E.g.: Setting station FM 89.10 in preset 2.  
1. Press TUNER button.  
2. Press TUNING MODE button to select MANUAL and then press  
TUNING/CH ( .,, ) button to select 89.10.  
~
Refer to step 2 above to tune in automatically and manually.  
3. Press TUNER MEMORY button.  
Tuner number will blink on the display.  
4. Press TUNING/CH ( .,, ) button to select preset 2.  
You can select from presets 1 to 30.  
5. Press TUNER MEMORY button.  
~
~
~
Tuner number will disappear and station 89.10 will be saved  
in preset 2.  
6. To preset other stations, repeat steps 2 to 5.  
to Listen to Preset Station  
~
Press TUNING MODE button of the remote control to select the PRESET and press TUNING/CH  
( .,, ) button.  
ꢃ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USing an iPod  
You can enjoy playback of your iPod using the supplied remote control.  
Listening to Music (iPOD audio function)  
You can play music files stored in the iPod player by connecting it to the AV  
receiver.  
1. Connect the iPod dock connector to the iPod jack on the AV  
Receiver.  
2. Place the iPod in the Dock.  
~
Your iPod is automatically turned on.  
3. Press the fUnCtiOn button on the remote control to select iPOD  
mode.  
~
Press the fUnCtiOn button until iPOD aUDiO is selected  
4. Press the PLay button on the remote control to play.  
The AV receiver starts playing from the first track of the iPod player.  
5. You can use the remote control or main unit to control simple playback functions such as PLay,  
PaUSe, StOP, f-SkiP( ) and B-SkiP ( ).  
~
`
See page 26 for compatible iPods.  
Compatibility depends on the software version of your iPod.  
M
This product only supports playing audio from your iPod.  
ꢃꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USing an iPod (Continued)  
Watching a Movie (iPOD Video function)  
You can play video files stored in the iPod player by connecting it to the  
AV receiver.  
1. Connect the iPod dock connector to the iPod jack on the AV  
receiver.  
2. In the iPod screen, move to Videos > Settings and set the tV Out  
option to On.  
3. Place the iPod in the Dock.  
<iPod Screen>  
4. Press the fUnCtiOn button on the remote control to select iPOD mode.  
~
If the iPod player is connected to the AV receiver, each time you press the  
the fUnCtiOn button, it will be toggled in the order of iPOD aUDiO   
iPOD ViDeO  
.
5. Set the AV IN option of the TV connected to the AV receiver to  
COMPOSITE.  
Follow the iPod onscreen guide through the following steps.  
6. Press the ,buttons on the remote control to select Videos and  
press the enter button.  
7. Press the ,buttons on the remote control to select Movies and press  
the enter button.  
8. Press the ,buttons to select the file to play and press the enter  
button.  
~
Video files of the iPod player will be played on the TV screen.  
9. You can use the remote control or main unit to control simple  
/
playback functions such as PLay, PaUSe, StOP, and  
.
~
If you press the PreV button within 3 seconds after the playback,  
the player will stop playing and return to the list screen.  
<iPod Screen>  
If you press the PreV button 3 seconds or later after the playback, the player will move to the  
start screen of the current file.  
~
~
Press the neXt button to stop playing and return to the list screen.  
Press the retUrn button to return to the previous menu.  
`
`
You must have the VIDEO (Monitor or VCR) output connected to your TV to view iPod video.  
See page 26 for compatible iPods.  
Compatibility depends on the software version of your iPod.  
M
`
`
When the current file is played to the end, the next file will not be played automatically.  
To play the next file, select a file to play in the list screen of the iPod player.  
No other screen than the playback one will appear on the TV screen. Check other screens on  
the iPod player.  
ꢃꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnVenient fUnCtiOnS  
Sleep timer function  
You can set the time that this unit will shut itself off.  
Press SLEEP button.  
~
SLEEP : OFF 15 30 45 60 90 120 M (MIN) will be  
selected in turn.  
to check sleep timer  
Press the SLEEP button.  
~
The remaining time before this unit will shut itself off is shown on the  
display.  
~
Pressing the button again changes the sleep time from what you set previously.  
to cancel sleep timer  
Press SLEEP button until “SLEEP : OFF” appears on the display.  
~
Mute function  
This function is useful when answering a doorbell or telephone call.  
Press the MUTE button.  
~
MUTE appears on the display.  
to output sound again  
Press the MUTE button again.  
~
MUTE will disappear and sound will output.  
`
SLEEP, Mute and the Adjust Display functions can only be operated with the remote control.  
M
reset function  
Signal outputs and frequency response from the speaker will be adjusted  
according to your speaker configuration and whether certain speakers  
are used or not.  
1. Press the MUTE button.  
~
MUTE appears on the display.  
2. Press “0” button five times and then press the ENTER button.  
“INITIAL : NO” appears on the display.  
3. Press ▲▼ buttons to select “YES”.  
The unit will turn off after 5 seconds.  
~
~
Using the SeLeCt button  
1. Turn off the power and hold the SELECT ( .,, ) button for longer than 5 seconds.  
~
POWER STANDBY indicator will flash.  
`
`
Using the RESET function will erase all stored settings.  
Do not use this unless necessary.  
M
ꢃꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnVenient fUnCtiOnS (Continued)  
adjust the display  
You can adjust the brightness of the display.  
Press the DIMMER button.  
~
Each time you press this, the brightness changes as follows : DARK   
BRIGHT.  
Using headphones  
Use headphones (not supplied) for private listening pleasure.  
Connect the headphones to the headphone jack and listen to music.  
`
Do not turn the volume up too high when you use headphones as It may damage your hearing.  
M
ꢃꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Miscellaneous  
OPerating yOUr tV WitH tHe reMOte COntrOL  
1. Press POWER button to turn on the TV.  
2. Press TV button to set the remote to TV mode.  
3. Point the remote control toward the TV.  
4. While holding down POWER button, enter the code corresponding to your brand of TV.  
~
If there is more than one code listed for your TV in the table, enter one at a time to determine  
which code works.  
~
If the code matches the TV's code, the TV will be turned off.  
5. If TV is turned on or off when you press the power button of the remote control, the setting is  
completed.  
~
You can use the TV POWER, VOLUME, CHANNEL, MENU and Numeric buttons (0~9).  
`
`
The remote control may not work on some brands of TVs. Also, some operations may not be  
possible depending on your brand of TV.  
M
The remote control will work with Samsung TVs by default.  
ꢃꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPerating yOUr tV WitH tHe reMOte COntrOL (Continued)  
TV Brand Code List  
Brand  
Code Number  
Brand  
Luxman  
LXI (Sears)  
Code Number  
Brand  
Sylvania  
Code Number  
018, 040, 048, 054, 059,  
060, 062  
061, 095, 096  
006  
Admiral (M.Wards) 056, 057, 058  
A Mark  
Anam  
018  
001, 015  
019, 054, 056, 059, 060,  
062, 063, 065, 071  
015, 017, 018, 048, 054,  
059, 060, 062, 072, 089  
001, 002, 003, 004,005,  
006, 007, 008, 009, 010,  
011, 012, 013, 014  
Symphonic  
Tatung  
Techwood  
Magnavox  
018  
AOC  
Bell & Howell  
(M.Wards)  
001, 018, 040, 048  
057, 058, 081  
Marantz  
Matsui  
040, 054  
054  
Teknika  
TMK  
003, 015, 018, 025  
018, 040  
Brocsonic  
Candle  
059, 060  
018  
MGA  
Mitsubishi/MGA  
018, 040  
018, 040, 054, 059, 060,  
075, 101  
Toshiba  
019, 057, 063, 071, 101  
107, 109, 110, 111, 113  
018  
059, 060, 069  
015, 017, 018, 040, 048,  
Cetronic  
Citizen  
CINEMA  
Classic  
Concerto  
Contec  
003  
003, 018, 025  
097  
003  
Vidtech  
Videch  
Wards  
MTC  
NEC  
018  
018, 019, 020, 040, 059,  
060  
003  
003  
003  
054, 060, 064  
018  
040  
003  
058, 079  
001  
018  
046  
015  
Nikei  
Onking  
Onwa  
Yamaha  
York  
Yupiteru  
Zenith  
Coronado  
Craig  
003, 005, 061, 082, 083,  
Panasonic  
006, 007, 008, 009, 054,  
066, 067, 073, 074  
018  
003, 015, 017, 018, 048,  
054, 059, 062, 069, 090  
015, 017, 018, 040, 048  
054, 062, 072, 112, 114,  
117, 118  
063, 066, 080, 091  
015, 018, 059  
040  
006, 066, 067  
017, 048, 056, 060, 061,  
075  
084  
062  
003  
059, 061, 063  
003  
002, 003, 004, 015,016,  
017, 018, 019, 020, 021,  
022, 023, 024, 025, 026,  
027, 028, 029, 030, 032,  
034, 035, 036, 040, 048,  
059, 090, 099, 100  
040  
Zonda  
Croslex  
Crown  
CURTIS MATHES  
CXC  
Daewoo  
Penney  
Philco  
Dongyang  
LOWE  
FINLUX  
003, 054  
054  
054, 109, 114  
Philips  
YOKO  
054  
054, 114  
054, 112, 114  
LOEWE OPTA  
PHONOLA  
RADIOLA  
SCHNEIDER  
AKAI  
Pioneer  
Portland  
Proton  
QUASAR  
Radio Shack  
054, 112  
054  
103  
GRUNDIG  
108, 109, 113, 119, 120,  
121  
108  
108  
113  
113  
113  
114  
114  
114  
114  
114  
114  
114  
114  
114  
116  
Daytron  
Dynasty  
Emerson  
003  
BLAUPUNKT  
SIEMENS  
CGE  
003, 015, 040, 046, 059,  
061, 064, 082, 083, 084,  
085  
019, 065, 103  
003  
RCA/Proscan  
018, 059, 067, 076, 077,  
078, 092, 093, 094  
003, 019  
Realistic  
Sampo  
Samsung  
IMPERIAL  
MIVAR  
SABA  
BANG&OLUFSEN  
BRIONVEGA  
FORMENTI  
METZ  
Fisher  
Funai  
Futuretech  
General Electric  
(GE)  
040  
000, 015, 016, 017, 040,  
043, 046, 047, 048, 049,  
054, 059, 060, 098  
019, 061, 065, 101, 102,  
103, 104  
003, 040, 060, 061  
015, 018, 019  
015, 057, 064, 101, 105,  
106, 115  
003  
006, 040, 056, 059, 066,  
067, 068  
Sanyo  
Hall Mark  
Hitachi  
Inkel  
JC Penny  
JVC  
040  
015, 018, 050, 059, 069  
045  
056, 059, 067, 086  
070  
Scott  
Sears  
Sharp  
WEGA  
RADIOMARELLI  
SINGER  
SINUDYNE  
TELEFUNKEN  
KTV  
059, 061, 087, 088  
Signature 2000  
(M.Wards)  
057, 058  
KEC  
003, 015, 040  
Sony  
050, 051, 052, 053, 055,  
KMC  
015  
101  
LG (Goldstar)  
001, 015, 016, 017, 037,  
038, 039, 040, 041, 042,  
043, 044, 054, 086  
Soundesign  
Spectricon  
SSS  
003, 040  
001  
018  
ꢃꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPerating yOUr DVD Or BD PLayer WitH tHe reMOte COntrOL  
1. Press POWER button to turn on the DVD (BD) player.  
2. Press DVD (BD) button to set the remote to DVD (BD) mode.  
~
If you operate VCR, press VCR button to set the remote to VCR mode.  
3. Point the remote control toward the DVD (BD).  
4. While holding down poWer button, enter the code corresponding to your brand of DVD (BD).  
~
If there is more than one code listed for your DVD (BD) in the table, enter one at a time to  
determine which code works.  
~
If the code matches the DVD (BD)'s code, the DVD (BD) will be turned off.  
5. If DVD (VCR) is turned on or off when you press the power button of the remote controller, the  
setting is completed.  
~
You can use DVD (BD) POWER, VOLUME, PLAY, PAUSE, STOP, SKIP, MENU and Numeric  
button (0~9).  
`
`
The remote control may not work on some brands of DVD (BD).  
Also, some operations may not be possible depending on your brand of DVD (BD).  
M
The remote control will work with Samsung DVD (BD) by default.  
DVD Brand Code List  
Brand  
DENON  
Code Number  
003, 032  
Brand  
ONKYO  
Code Number  
004, 014  
Brand  
TOSHIBA  
Code Number  
004, 018  
DOONOON  
DMTECH  
FISHER  
GE  
HARMAN/KARDON 012  
JVC  
019  
017  
002  
006  
OPTIMUS  
PANASONIC  
PROSCAN  
PHILIPS  
PIONEER  
RCA  
011  
021  
006  
YAMAHA  
ZENITH  
TAEGWANG  
PS2  
X-BOX  
APEX  
009, 033  
004, 024  
026  
028  
029  
004, 023  
007, 011, 022, 025  
006  
010, 013  
030  
KENWOOD  
LG  
008  
001  
SAMSUNG  
SANYO  
000, 027  
002  
Marantz  
031  
MAGNAVOX  
MITSUBISHI  
004  
005, 016  
SONY  
THETA DIGITAL  
015, 020  
011  
BD player Brand Code List  
Brand  
Code Number  
SAMSUNG  
000, 001, 002, 003, 004  
`
For the BD player, only a Samsung product can be controlled with the remote control.  
M
ꢃꢆ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Before requesting service, please check the following.  
Symptom  
Check  
Remedy  
The unit will not turn on.  
• Is the power cord plugged into the  
outlet?  
• Connect the power plug to the outlet.  
A function does not work  
when the button is pressed.  
• Is there static electricity in the air?  
• Disconnect the power plug and connect  
it again.  
Sound is not produced.  
• Are the speakers and external  
components connected properly?  
• Connect them correctly.  
• Press Mute button to cancel the  
function.  
• Is the Mute function on?  
• Is the volume set to minimum?  
• Adjust the volume.  
• Is the speaker setup set incorrectly to  
NONE?  
• Refer to pages 33 to select LARGE,  
SMALL or YES.  
• Connect it correctly.  
Picture does not appear on a  
TV when the function is  
selected.  
• Is the external component connected  
properly?  
Remote controller does not  
work.  
• Are the batteries drained?  
• Replace with new batteries.  
• Is the distance between remote control • Operate at close distance.  
and main unit too great?  
Are the left/right speaker or left/right  
input/output cables connected  
properly?  
• Check the left/right channel and connect it/  
them correctly.  
The sound from the left/right  
channels is reversed.  
Can't receive radio  
broadcasts.  
• Is FM antenna connected properly?  
• Connect the antenna correctly.  
• If the input strength of antenna signal is  
weak, install the FM antenna in a place  
with good reception.  
• Refer to pages 14 ~16 to connect them  
properly.  
There is no sound from  
surround speakers.  
• Is the surround speaker connected  
properly?  
• Refer to page 33 to select LARGE or SMALL.  
• Is SURR (surround) incorrectly set to  
NONE in speaker setup?  
• Refer to pages 37 ~ 41 to select proper  
Surround Mode.  
• Is surround mode set to stereo?  
ꢃꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Check  
Remedy  
• Refer to pages 14 ~16 to connect it  
There is no sound from  
surround back speakers  
• Are the surround back speakers  
connected properly?  
properly.  
• Is the S.BACK(Surround Back) selected  
to NONE in Speaker Setup?  
• Refer to page 33 to select LARGE or  
SMALL.  
• Is Surround Mode set to EX/ES?  
• Refer to page 40 to set Surround Mode  
to EX/ES.  
Can't select EX/ES mode.  
• Is S.BACK(Surround Back) selected to  
NONE in Speaker Setup?  
• Refer to page 33 to select LARGE or  
SMALL.  
• Is the input signal selected properly?  
• Use 7.1 channel external component.  
Can't select Dolby Pro Logic  
llx mode.  
• Is the input signal selected properly?  
• Select 2 channel Dolby Digital, PCM,  
and Analog input signal.  
Can't select NEO:6 mode.  
• Is the input signal selected properly?  
• Is Digital input selected?  
• Use PCM and Analog input signal.  
There is no sound when  
playing a DTS encoded DVD.  
• Check whether the DVD player is  
properly connected and refer to page  
46 to select the digital input.  
Product protection function  
Heat protection  
The protection function will come on if the main unit or power transformer overheats.  
"
" will appear in the display .  
This function will come on :  
- If speaker terminal is shorted  
- If speaker cable is shorted  
If there is no problem when you turn the unit on again after turning it off, PROTECTION mark will disappear on the  
display and the unit will work properly.  
`
If PROTECTION appears on the display, check whether the speaker terminal is shorted and  
then turn on the unit  
M
ꢄ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
SPeCifiCatiOnS  
Power supply  
120V, 60 Hz  
Standby power consumption  
0.9W  
Main unit  
75W  
Power consumption  
Subwoofer  
90W  
GENERAL  
Weight  
12.7 Ibs  
Dimensions (W x H x D)  
Operating temperature range  
Operating humidity range  
Frequency response  
16.9 x 5.7 x 13.7 inches  
41°F~+95°F  
10%~75%  
87.5~108.0MHz  
12dBf  
Usable sensitivity  
S/N ratio  
FM TUNER  
MONO/STEREO 55/55dB  
MONO/STEREO 0.3/0.8%  
30dB  
Distortion  
Stereo separation  
Tuner output level  
Rated output  
1kHz, 75kHz Dev  
20Hz~20kHz/THD = 0.9%  
4 Ω 100W/CH  
4 Ω 100W/CH  
4 Ω 100W/CH  
4 Ω 100W/CH  
450mV/47kΩ  
80dB  
Front speaker(left+right)  
Center speaker  
Surround speaker(left+right)  
AMPLIFIER  
Surround back  
Input sensitivity/impedance  
S/N ratio (analog input)  
Separation (1kHz)  
60dB  
Analog input  
Digital input/96kHz PCM  
Input  
20Hz~20kHz(±3dB)  
20Hz ~44kHz(±3dB)  
Compatible 1080p  
Compatible 1080p  
NTSC/PAL  
FREQUENCY  
RESPONSE  
HDMI  
Output  
TV format  
Input level/impedance  
1Vp-p/75 Ω  
VIDEO OUTPUT Output level/impedance  
Video frequency response  
S/N ratio  
1Vp-p/75 Ω  
5Hz to 10kHz(-3dB)  
60dB  
* S/N ratio, distortion, separation and usable sensitivity are based on measurement using AES (Audio Engineering  
Society) guidelines.  
ꢄ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective  
material and workmanship.  
SECA further warrants that if this product falls to operate properly within the specified warranty  
period and the failure is due to improper workmanship or defective materials, SECA will repair  
or replace the product at its option.  
All warranty repairs must be performed by a SECA Authorized Service Center. (The name and  
address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)  
LABOR  
PARTS  
One year (Carry- in)  
One year  
On carry-in models, transportation to and from the service center is the customer’s responsibility.  
The original dated sales receipt must be retained by the customer and is the only acceptable  
proof of purchase. It must be presented to the authorized service center at the time service is  
requested.  
EXCLUSIONS (WHAT IS NOT COVERED)  
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse,  
incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use or  
damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered under this  
warranty. Customer adjustments which are explained in the instruction manual are not covered  
under the terms of this warranty. This warranty will automatically be voided for any unit found with a  
missing or altered serial number. This warranty is valid only on products purchased and used in  
Canada.  
HEADQUARTERS  
SAMSUNG ELECTRONICS CANADA INC.,  
CUSTOMER SERVICE  
55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA  
FABRIQUE EN CORÉE  
1-800-SAMSUNG (1-800-7267864)  
www.SAMSUNG.COM/CA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care center.  
region  
Country  
Customer Care Center   
1-800-SAMSUNG(726-7864)  
01-800-SAMSUNG(726-7864)  
1-800-SAMSUNG(726-7864)  
0800-333-3733  
Web Site  
CANADA  
MEXICO  
U.S.A  
North America  
ARGENTINE  
BRAZIL  
0800-124-421, 4004-0000  
800-SAMSUNG(726-7864)  
00-1800-5077267  
CHILE  
NICARAGUA  
HONDURAS  
COSTA RICA  
ECUADOR  
800-7919267  
0-800-507-7267  
1-800-10-7267  
EL SALVADOR  
GUATEMALA  
JAMAICA  
800-6225  
Latin America  
1-800-299-0013  
1-800-234-7267  
PANAMA  
800-7267  
PUERTO RICO  
REP. DOMINICA  
TRINIDAD & TOBAGO  
VENEZUELA  
COLOMBIA  
1-800-682-3180  
1-800-751-2676  
1-800-SAMSUNG(726-7864)  
0-800-100-5303  
01-8000112112  
BELGIUM  
02 201 2418  
CZECH REPUBLIC  
DENMARK  
FINLAND  
800-SAMSUNG(800-726786)  
8-SAMSUNG(7267864)  
30-6227 515  
www.samsung.com/fi  
FRANCE  
01 4863 0000  
GERMANY  
HUNGARY  
ITALIA  
01805 - SAMSUNG(726-7864 € 0,14/Min)  
06-80-SAMSUNG(726-7864)  
800-SAMSUNG(726-7864)  
02 261 03 710  
LUXEMBURG  
NETHERLANDS  
NORWAY  
Europe  
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)  
3-SAMSUNG(7267864)  
0 801 1SAMSUNG(172678), 022-607-93-33  
80820-SAMSUNG(726-7864)  
0800-SAMSUNG(726-7864)  
902-1-SAMSUNG (902 172 678)  
075-SAMSUNG(726 78 64)  
0845 SAMSUNG (7267864)  
0818 717 100  
POLAND  
PORTUGAL  
SLOVAKIA  
SPAIN  
SWEDEN  
U.K  
EIRE  
AUSTRIA  
0810-SAMSUNG(7267864, € 0.07/min)  
0848-SAMSUNG(7267864, CHF 0.08/min)  
8-800-555-55-55  
SWITZERLAND  
RUSSIA  
KAZAKHSTAN  
UZBEKISTAN  
KYRGYZSTAN  
TADJIKISTAN  
UKRAINE  
LITHUANIA  
LATVIA  
8-10-800-500-55-500  
8-10-800-500-55-500  
00-800-500-55-500  
CIS  
8-10-800-500-55-500  
8-800-502-0000  
8-800-77777  
8000-7267  
ESTONIA  
800-7267  
AUSTRALIA  
NEW ZEALAND  
CHINA  
1300 362 603  
0800 SAMSUNG (0800 726 786)  
800-810-5858, 400-810-5858, 010-6475 1880  
3698-4698  
HONG KONG  
INDIA  
3030 8282, 1800 110011, 1-800-3000-8282  
0800-112-8888  
INDONESIA  
JAPAN  
MALAYSIA  
0120-327-527  
1800-88-9999  
Asia Pacific  
1-800-10-SAMSUNG(726-7864)  
1-800-3-SAMSUNG(726-7864), 02-5805777  
PHILIPPINES  
SINGAPORE  
THAILAND  
TAIWAN  
1800-SAMSUNG(726-7864)  
1800-29-3232, 02-689-3232  
0800-329-999  
VIETNAM  
TURKEY  
1 800 588 889  
444 77 11  
Middle East &  
Africa  
SOUTH AFRICA  
U.A.E  
0860-SAMSUNG(726-7864 )  
800-SAMSUNG (726-7864), 8000-4726  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Code No. AH68-02174S  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pyramid Car Audio Stereo Amplifier PA1000X User Guide
Radica Games Games 73048 User Guide
Radio Shack Automobile Alarm RS 3000 User Guide
Radio Shack Portable Radio 12 500 User Guide
Reliable Sewing Machine 787 User Guide
Revolabs Microphone Polycom HDX 8000 User Guide
Salton Pedicure Spa FM14B User Guide
Samsung DVD Player BD D7500 User Guide
Sanyo Air Conditioner 09AHX52 User Guide
Scotsman Ice Ice Maker CU1526 User Guide