Digital Surround
AV Receiver System
HT-AS600
SAMSUNG ELECTRONICS CANADA, INC.
HEADQUARTERS
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
TEL: 1-905-542-3535
SERVICE DIVISION
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
1-800-SAMSUNG (1-800-726-7864)
Instruction Manual
ELECTRONICS
AH68-01725S
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Contents
PREPARATION
Safety Warnings ..............................................................................................................1
Precautions......................................................................................................................2
Features ..........................................................................................................................3
Description ......................................................................................................................5
CONNECTIONS
Dolby Pro Logic II
Dolby Pro Logic II is a new form of multi-channel audio signal
decoding technology that improves upon existing Dolby Pro Logic.
Connecting the Speakers ................................................................................................9
Connecting External Components ..................................................................................11
Connecting the FM and AM Antennas.............................................................................14
OPERATION
Before Using the AV Receiver.........................................................................................15
Selecting External Component Input ..............................................................................16
Setting the Speaker Mode...............................................................................................17
Setting the Speaker Listening Distance...........................................................................19
Setting DRC (Dynamic Range Compression) .................................................................21
Test Tone ........................................................................................................................22
Setting Speaker Level .....................................................................................................25
Dolby Pro Logic ll Mode..................................................................................................27
Dolby Pro Logic ll Effect .................................................................................................29
SFE Mode........................................................................................................................31
Stereo Mode....................................................................................................................33
DTS (Digital Theater Systems)
DTS play backs 5.1 channel sound with less compression than Dolby
Digital for richer sound.
RADIO OPERATION
Listening to Radio ...........................................................................................................35
Presetting Radio Stations ...............................................................................................36
MISCELLANEOUS
Convenient Functions 37
Operating TV with Remote Control..................................................................................39
Operating your VCR (DVD) with Remote Control............................................................41
Before Calling for Service................................................................................................43
Specifications ..................................................................................................................45
WARRANTY ....................................................................................................................46
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
[
]
Rear Panel
[
]
Front Panel
INPUT button
AM ANTENNA
JACK
HEADPHONE Jack
VCR/SAT VIDEO INPUT
JACK
POWER STANDBY Indicator
SETUP button
SURROUND button
VCR VIDEO OUTPUT
JACK
COOLING FAN
FM ANTENNA
JACK
DVD VIDEO INPUT
JACK
SUBWOOFER SPEAKER TERMINALS
SURROUND SPEAKER TERMINALS
FRONT SPEAKER
TERMINALS
POWER button
VOLUME CONTROL
CD COAXIAL DIGITAL
AUDIO INPUT JACK
CENTER SPEAKER TERMINALS
DVD OPTICAL DIGITAL AUDIO
INPUT JACK
REMOTE CONTROL Sensor
ANALOG / DIGITAL BUTTON
SELECTION button
TUNER (
) button
,
MONITOR VIDEO
OUTPUT JACK
[
]
Display
MPEG2
INDICATOR
DVD AUDIO INPUT JACKS
DTS
INDICATOR
LIVE SURROUND
INDICATOR
VCR AUDIO OUTPUT JACKS
VCR/SAT AUDIO INPUT JACKS
CD AUDIO INPUT JACKS
DOLBY
INDICATOR
SPEAKER INDICATOR
L.PCM
INDICATOR
SUBWOOFER OUTPUT JACKS 1, 2
DOLBY DIGITAL
INDICATOR
RADIO FREQUENCY
INDICATOR
Accessories
√√
œœ
DOLBY PRO
LOGIC II
INDICATOR
DIGITAL INDICATOR
RADIO STEREO INDICATOR
Remote Control
Battery(AAA Size 1.5V)
AM Antenna
RADIO BROADCASTING
RECEIVING INDICATOR
FRONT DISPLAY
FM Antenna
User’s Manual
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Insert Remote Batteries
[
]
Remote Control
TV Indicator
VCR Indicator
AV RECEIVER Indicator
POWER button
FUNCTION button
SLEEP button
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
Replace the battery
cover.
TV VIDEO
,
1
2
3
DVD Indicator
MODE button
MO/ST button
TUNER button
SPEAKER DISTANCE button
TEST TONE button
SUBWOOFER button
SPEAKER SETUP button
MODE button
SFE MODE button
EFFECT button
EXTERNAL DEVICE PLAYBACK button
MUTE button
VOLUME CONTROL button
MENU button
TUNER MEMORY button
TUNER/CHANNEL button
SPEAKER LEVEL button
STEREO button
Follow these precautions to avoid leaking or cracking batteries:
ANALOG/DIGITAL button
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
Use the correct type of batteries.Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
•
•
•
•
MOVE/SELECT button
Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
To open the remote control cover,
push the top of the cover, then slide
downward.
DIMMER button
Direct Function Select button
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
FRONT (R) FRONT (L) SURROUND (R) SURROUND (L)
ACTIVE SUBWOOFER
(not supplied)
PS-AF600 PS-AF600
PS-AR600 PS-AR600
MAIN UNIT
AV-R600
SL
SR
SYSTEM MODEL NAME : HT-AS600
MAIN UNIT
AV-R600
FRONT SPEAKER
CENTER SPEAKER
SURROUND SPEAKER
PASSIVE SUB WOOFER
PS-AF600
PS-AC600
PS-AR600
PS-AW600
Position of AV Receiver
Surround Speakers
•
Place AV Receiver on a dedicated stand or rack.
•
•
Place these speakers behind your listening position.
If there isn't enough room, place these speakers so they
face each other.
CENTER
PS-AC600
PASSIVE
SUBWOOFER
PS-AW600
•
Place them about 60 to 90cm (2 to 3feet) above your ear,
facing slightly downward.
Front Speakers
❈❈Unlike the front and center speakers, the surround
speakers are used to handle mainly sound effects and
sound will not come from them all the time.
√ Connecting Speaker Wire
•
•
•
Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Press the tab of the
speaker connector.
Insert the black wire into the black(-)
terminal and the gray wire into the
gray(+) terminal.
1
2
Subwoofer
•
The position of the subwoofer is not so critical.
Place it anywhere you like.
Center Speaker
•
It is best to install it at the same height as the front
speakers.
•
You can also install it directly over or under the TV.
•
When you place the speaker on the wall, make sure to
fasten it tightly so that it may not fall off.
•
•
Never touch speaker terminals while the power is on.
Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Components
Connecting Video Component
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
SAT(Settop Box)
DVD Player Video Projector
•
•
•
Since Analog Audio In and Video In jack of the
main unit are used for both SAT and VCR, you
cannot connect 2 devices at the same time.
If the external component has only one Audio
Output jack, connect it to either the right or left
Audio Input jack of the main unit.
Connect the audio cable's red plug to the red jack
and white cable to the white jack.
TV
•
Disconnect the power plug from the outlet if you do not use this unit for long period of time.
VCR
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the FM and AM Antennas
Connecting External Component
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
Connecting Audio Component
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
AM Loop Antenna
(supplied)
FM Antenna (supplied)
CD Player
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
FM antenna connection
AM antenna connection
1. Connect the FM antenna supplied to the FM
75ΩCOAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you find
a location where reception is good, then fasten it to
a wall or other rigid surface.
1. Connect the AM loop antenna supplied to the AM
and terminals.
2. If reception is poor, connect an outdoor single vinyl-
covered wire to the AM terminal.
(Keep the AM loop antenna connected).
The cooling fan dissipates the heat generated inside the unit so that the unit can
be operated normally. The cooling fan is activated automatically to supply cool air
to the unit.
COOLING FAN
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the
unit could rise and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the AV Receiver
Selecting External Component Input
To Select the Function
Turning On/Off
REMOTE CONTROL
MAIN UNIT
Method 1
Press the FUNCTION button.
Each time you press the this button, CD ❈ DVD ❈ VCR/SAT ❈ FM ❈ AM will be
selected in turn.
Connect the power plug to the outlet.
1
2
Press the POWER (
) button of the main unit.
•
•
This unit will be turned on or off.
Press DIRECT FUNCTION Select button.
Method 2
REMOTE CONTROL
•
You can directly select VCR/SAT, DVD, CD.
Press the POWER (
) button of the remote control while main unit is turned on.
MAIN UNIT
Press INPUT button.
•
This unit will be turned on or set to Standby mode.
•
Each time you press the this button, CD ❈ DVD ❈ VCR/SAT ❈ FM ❈ AM will be selected
in turn.
•
•
This unit will not turned on or off even if you press the POWER (
remote control while the main unit is turned off.
) button on the
When you turn off the power by pressing the POWER (
control, the unit will be in standby mode.To completely turn off the power, press the
POWER ( ) button of the main unit. Standby indicator will be turned off.
) button on the remote
To Select Analog/Digital Input
You can listen to sound in Analog 2 Channels or Dolby Digital 5.1 Channel using this unit.
Functions of Dedicated Remote Control
You can operate TV, VCR, DVD, AV Receiver with one remote control.
See pages 39-42 for more details.
Press the ANALOG/DIGITAL button.
•
For DVD, VCR/SAT Function
ANALOG and OPTICAL (DVD OPTICAL) will be selected repetitively.
REMOTE CONTROL
Press MODE button.
•
For CD Function
ANALOG and COAXIAL will be selected repetitively.
•
Each time you press this button, it will select and blink TV indicator ❈ VCR indicator
❈ DVD indicator ❈ AV Receiver indicator in turn.
• You can enjoy Dolby Digital only if you connect the Audio Output jack of an
external audio component to the optical/coaxial digital Audio Input jack on the main
unit.
• You can operate this function only with the remote control.
• This function will be selected in analog only for VCR function.
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Speaker Mode
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.Signal outputs
and frequency response from the speaker will automatically be adjusted according to your speaker configuration
and whether certain speakers are used or not.
√
REMOTE CONTROL
Press SPK SEL. button to select the speaker you want.
1
•
Each time you press this button, F.SPK ❈ C.SPK ❈ S.SPK ❈ SW SPK ❈
CROVR ❈ SPK MODE OFF will be selected in turn.
MAIN UNIT
Press …† button to set the speaker mode.
Press SETUP button.
2
1
2
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press INPUT button one time.
•
“SPEAKER SETUP” appears in the display.
Press SURROUND button to select the speaker you want.
3
4
•
Each time you press this button, F.SPK ❈ C.SPK ❈ S.SPK ❈ SW SPK ❈
CROVR will be selected in turn.
,
Press SELECT (
) button to set the speaker mode.
To Exit Setup Mode
To Exit Setup Mode
•
Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit.
•
Wait for about 5 seconds or press the SPK SEL. button of the remote control to
“SETUP MODE OFF” appears on the display and exits Setup Mode.
select SPK MODE OFF.
•
•
LARGE : Select when you use large speaker. You can listen to full
range sound.
SMALL : Select this when you use small speaker.
Bass below 100Hz will not be output.
NONE : Select this when you use no speaker.
YES : Select this when you use Subwoofer Speaker if you play
back in 2 Channel Stereo.
NO : Select when you do not use Subwoofer Speaker if you play
back in 2 Channel Stereo.
CROVR: Select the crossover frequency depending on the size of
speaker connected when you use subwoofer.
Select 60Hz if cone paper speaker is 5.6inch, select 80Hz
for 4.8inch, 100Hz for 4inch, 120Hz for 3.2inch, 150Hz for
2.4inch, 180Hz and 200Hz for 1.6inch.
To turn the SUBWOOFER On or Off.
Press SUBWOOFER button.
Setting the Speaker
•
•
•
•
•
F.SPK (Front) : LARGE, SMALL
•
•
Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn.
If you play in 2 Channel Stereo, select 'YES' to use Subwoofer and 'NO' not to use.
C.SPK (Center) : LARGE, SMALL, NONE
S.SPK (Surround) : LARGE, SMALL, NONE
SW SPK (Subwoofer) : YES, NO
•
•
CROVR (Crossover Frequency): 60, 80, 100, 120, 150, 180, 200Hz
•
•
•
If F.SPK is set to ‘SMALL’, SW SPK is fixed to ‘YES’.
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Speaker Listening Distance
√
REMOTE CONTROL
Press the SPEAKER DISTANCE button to select the
1
speaker you want.
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈ S.W ❈
MAIN UNIT
DISTANCE OFF will be selected in turn.
Press SETUP button.
1
2
Press …† button to set the speaker distance.
2
•
“SETUP MODE” appears on the display and enters into Setup Mode.
•
For F.L, CEN, F.R, S.W Speaker, you can set the distance from the speaker to
listening position between 0.0~1.5m in intervals of 0.3m.
Press INPUT button 2 times.
•
For S. R, S.L Speaker, you can set the distance from the speaker to listening
listening position between 0.0~4.5m in intervals of 0.3m.
•
“DISTANCE SETUP” appears on the display.
Press SURROUND button to select the speaker you want.
3
4
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈ S.W will be
selected in turn.
Press SELECT(
,
) button to set the speaker distance.
•
For F.L, CEN, F.R, S.W Speaker, you can set the distance from the speaker to
listening position between 0.0~1.5m in intervals of 0.3m.
•
For S.R, S.L Speaker, you can set the distance from the speaker to listening
listening position between 0.0~4.5m in intervals of 0.3m.
To Exit Setup Mode
•
Wait for about 5 seconds or press the SPEAKER DISTANCE button of remote control
to select DISTANCE OFF.
To Exit Setup Mode
•
Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit. “SETUP MODE
OFF” appears on the display and exit Setup Mode.
Setting Speaker Distance
Set the distance from the speaker to listening position in intervals of 0.3m.
•
If the listening position is beyond the range of speaker
distance setup when you place the speaker, set the
speaker distance to the maximum.
•
•
•
•
•
•
•
F.L (Front-Left) : 0feet ~ 5feet
CEN (Center) : 0feet ~ 5feet
F.R (Front-Right) : 0feet ~ 5feet
S.R (Surround-Right) : 0feet ~ 15feet
S.B (Surround Center): 0feet ~ 15feet
S.L (Rear-Left): 0feet ~ 15feet
SW (Subwoofer): 0feet ~ 5feet
19
20
Download from Www.Somanuals.com. All Manuals Search And Download.
(Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Setting DRC
Test Tone
Use test tone to check the speaker connection status or level.
To Automatically Output Test Tone
√
REMOTE CONTROL
Press TEST TONE button.
1
√
•
•
Test signal will be automatically output as follows; F.L ❈ CEN ❈ F.R ❈ S.R
❈ S.L ❈ S.W.
During test tone output, press …† button to adjust the speaker output level
MAIN UNIT
from -10 to +10 dB by 1 step.
Press SETUP button.
1
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press INPUT button 3 times.
2
3
•
“DRC SETUP” appears on the display.
Press SURROUND button to set DRC.
•
Each time you press this button, DRC : STD ❈ DRC : MAX ❈ DRC : MIN will be
selected in turn.
To Exit Setup Mode
To Stop Test Tone
•
Press TEST TONE button again.
•
Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit.
“SETUP MODE OFF” appears on the display and exits Setup Mode.
Setting DRC
•
You can only set this function via the main unit.
•
•
•
STD : Sets DRC effect to standard.
MAX : Sets DRC effect to maximum.
MIN : Sets DRC effect to minimum.
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Test Tone
Use test tone to check speaker connection status or level.
To Automatically Output Test Tone
To Manually Output Test Tone
√
√
MAIN UNIT
MAIN UNIT
Press SETUP button.
Press SETUP button.
1
2
3
1
•
“SETUP MODE” appears on the display and enters into Setup Mode.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press INPUT button 5 times.
Press INPUT button 4 times.
2
3
•
“TEST-T MANU” appears in the display.
•
“TEST-T AUTO” appears in the display.
Press SURROUND button.
Press SURROUND button.
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈ S.W will be
•
Test signal will be automatically output as follows; F.L ❈ CEN ❈ F.R ❈
selected in turn.
S.R ❈ S.L ❈ S.W .
,
•
During test signal output, press SELECT (
output level from -10 to +10 dB by 1 step.
) button to adjust the speaker
,
Press SELECT(
)button to set the test tone as you want.
4
•
You can adjust the speaker output level from -10 to +10dB by 1 step.
To Stop Test Tone
To Stop Test Tone
Method 1) Press INPUT button 2 times.
“TEST-T OFF” appears on the display and test tone stops.
Method 1) Press INPUT button 1 time.
“TEST-T OFF” appears on the display and test signal stops.
Method 2) Turn VOLUME CONTROL.
“SETUP MODE OFF” appears on the display and test tone stops.
•
•
Method 2) Turn VOLUME CONTROL.
“SETUP MODE OFF” appears on the display and test tone stops.
•
•
Test Tone Output
•
•
•
•
•
•
F.L (Front-Left) : -10 ~ +10dB
CEN (Center) : -10 ~ +10dB
F.R (Front-Right) : -10 ~ +10dB
S.R (Surround-Right) : -10 ~ +10dB
S.L (Surround-Left): -10 ~ +10dB
S.W (Subwoofer): -10 ~ +10dB
23
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Speaker Level
You can set the balance and level of speakers
√
Remote Control
Press SPK LEVEL button to select the speaker you want.
1
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈ S.W ❈
SPK LEVEL OFF will be selected in turn.
MAIN UNIT
Press …† button to set the speaker level you want.
2
Press SETUP button.
1
•
•
•
You can adjust it from -10 to +10dB by 1 step.
The sound gets quieter at -10dB and louder at +10dB.
Default setting value is 00dB.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press INPUT button 7 times.
2
3
•
“LEVEL SETUP” appears on the display.
Press SURROUND button.
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈ S.W
will be selected in turn.
,
Press SELECT(
want.
•
•
•
) button to set to the speaker level you
4
You can adjust it from -10 to +10dB by 1 step.
The sound gets smaller at -10dB and louder at +10dB.
Default setting value is 00dB
To Exit Setup Mode
•
Wait for about 5 seconds or press SPK LEVEL button on the remote control to select
SPK LEVEL OFF.
To Exit Setup Mode
•
Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. “SETUP
MODE OFF” appears on the display and exits Setup Menu.
Setting Speaker Level
•
•
•
•
•
•
F.L (Front-Left) : -10 ~ +10dB
CEN (Center) : -10 ~ +10dB
F.R (Front-Right) : -10 ~ +10dB
S.R (Surround-Right) : -10 ~ +10dB
S.L (Surround-Left): -10 ~ +10dB
S.W (Subwoofer): -10 ~ +10dB
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Pro Logic ll Mode
This mode provides 5.1 channel sound from 2 channel sources
REMOTE CONTROL
Press
MODE button.
1
•
Each time you press this button, MUSIC ❈❈CINEMA ❈❈MATRIX ❈❈PROLOGIC
will be selected in turn.
MAIN UNIT
Press SURROUND button briefly to select “DPL ll” Mode.
1
•
Each time you press this button, DPL ll ❈ SFE ❈ STEREO will be selected in
turn.
Press SELECT(
) button.
,
2
•
Each time you press SELECT (
) button, MUSIC ❈ CINEMA ❈
MATRIX ❈ PROLOGIC will be selected in turn.
•
Each time you press SELECT (
) button, PROLOGIC ❈ MATRIX ❈
CINEMA ❈ MUSIC will be selected in turn.
To Exit Setup Mode
To Exit Setup Mode
•
Wait for about 5 seconds.
•
Wait for about 5 seconds.
Dolby Pro Logic ll Mode
•
MUSIC : Provides 5.1 Channel Surround sound to digital, analog
or existing stereo sources such as CD, TAPE, FM, TV and Stereo
VCR.
CINEMA : Adds realism to the movie soundtrack.
MATRIX : You will hear 5.1 Channel Surround sound.
PROLOGIC : You will experience a surround effect with just the
front left and right speakers.
•
•
•
You cannot use Dolby Pro Logic ll Mode for multi channel
signals such as Dolby Digital and DTS.
Pro Logic works only for PCM audio signals with sampling
frequencies of 32KHz, 44KHz or 48KHz.
Sound will not be output from rear center speaker if PCM
audio signal is mono.
•
•
•
27
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Pro Logic ll Effect
This function works only in Dolby PRO LOGIC II MUSIC Mode.
REMOTE CONTROL
Press
Press
MODE button to select ‘MUSIC’ Mode.
EFFECT button.
1
2
•
Each time you press this button, C-WIDTH ❈ DIMENSION ❈ PANORAMA ❈
DPL ll EFT OFF will be selected in turn.
MAIN UNIT
Press SETUP button.
1
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press INPUT button 9 times.
2
3
•
“DPL ll MODE”appears on the display.
Press SURROUND button.
Press …† button to select Dolby Pro Logic II effect you
want.
3
•
Each time you press this button, C-WIDTH ❈ DIMENSION ❈ PANORAMA
will be selected in turn.
•
•
•
C-WIDTH: You can set from 0 to 7.
DIMENSION: You can set from -7 to +7.
PANORAMA: You can Set it ON or OFF.
Press SELECT(
effect you want.
,
) button to select Dolby Pro Logic ll
4
To Exit Setup Mode
•
Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. “SETUP
MODE OFF” appears on the display and exits Setup Mode.
To Exit Setup Mode
•
Wait for about 5 seconds or press
DLP ll EFT OFF.
Effect button of remote control to select
Dolby Pro Logic llx Effect
•
C-WIDTH : This sets the width of the center image. The higher the setting, the less
sound comes from the center speaker.
•
•
DIMENSION : Incrementally adjusts the sound field (DSP)from the front or rear.
PANORAMA : This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall imaging.
29
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SFE Mode
Refer to the unique sound existing at specific place and you can feel live sound as if you are listening at
actual site.
REMOTE CONTROL
Press SFE MODE button.
1
•
Each time you press this button, HALL ❈ THEATER ❈ ARENA ❈ CLUB ❈
DOME ❈ STADIUM ❈ CHURCH will be selected in turn.
MAIN UNIT
Press SURROUND button briefly to select ‘SFE’ Mode.
1
•
Each time you press this button, DPL II ❈ SFE ❈ STEREO will be selected in
turn.
2 Press SELECT(
) button.
,
•
Each time you press Select (
CLUB ❈ DOME ❈ STADIUM ❈ CHURCH will be selected in turn
Each time you press Select ( ) button, CHURCH ❈ STADIUM ❈ DOME
❈ CLUB ❈ ARENA ❈ THEATER ❈ HALL will be selected in turn.
) button, HALL ❈ THEATER ❈ ARENA ❈
•
To Exit Setup Mode
To Exit Setup Mode
•
Wait for about 5 seconds.
•
Wait for about 5 seconds.
31
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Stereo Mode
You can select this mode when you listen to sound through the Front Left and Right speakers and subwoofer.
For Surround Mode and Input Signal
o = active, – = inactive
Output Channel
Display Information
Surround Mode
Input Signal
Decoding
SL
Sub
L/R
C
Display Signal Format
DIGITAL
Channel Status
L, C, R, SL, SR, SW
SR Woofer
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
Dolby D Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
L.PCM (Audio)
Analog
Dolby Digital 5.1
Dolby Digital 5.1
Pro Logic II x
Pro Logic II x
Pro Logic II x
Pro Logic II x
DTS 5.1
DTS 96/24
DTS 5.1
Neo:6
DOLBY
(MUSIC,
CINEMA,
MATRIX,
GAME,
DIGITAL
DIGITAL
DIGITAL
L, C, R, SL, SR, SW
L, R
L, R
L.PCM
L, R
PROLOGIC
)
ANALOG
dts, ES
DTS 96/24
dts
-
DTS-ES
L, C, R, SL, SR, SW
DTS 96/24
L, C, R, SL, SR, SW
DTS (5.1)
L, C, R, SL, SR, SW
NEO:6
(MUSIC,
CINEMA)
L.PCM (Audio)
Analog
L.PCM
ANALOG
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
dts, ES
dts
L, R
-
Neo:6
-
-
Dolby D (2ch)
Dolby D (2ch Surr)
Dolby Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
DTS-ES
Neo:6
L, R
REMOTE CONTROL
MAIN UNIT
-
Neo:6
L, R
SFE
-
-
-
-
-
-
-
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, R
Press STEREO button.
Press SURROUND button briefly to select
SFE
-
‘STEREO’.
•
“STEREO” appears in the display and Stereo Mode is
selected.
O
O
O
O
O
O
O
O
SFE
•
Each time you press this button, DPL ll ❈ SFE ❈ STEREO
SFE
L, R
will be selected in turn.
SFE
SFE
-
-
-
-
-
-
-
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, R
DTS (5.1ch)
L.PCM (Audio)
Analog
SFE
-
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
SFE
L.PCM
SFE
ANALOG
DIGITAL
DIGITAL
dts, ES
dts
-
Dolby D Surr. EX
Dolby D (5.1ch)
DTS-ES
Dolby Digital EX
Dolby Digital EX
DTS-ES
DTS-ES
Stereo
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, R,
EX/ES
DTS (5.1ch)
Dolby Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
DTS-ES
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DIGITAL
DIGITAL
DIGITAL
DIGITAL
dts, ES
dts 96/24
dts
To Exit Setup Mode
To Exit Setup Mode
Stereo
•
Wait for about 5 seconds.
Stereo
•
Wait for about 5 seconds.
-
Stereo
L, R
O
O
O
-
Stereo
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, R
STEREO
DTS 96/24
Stereo
DTS (5.1ch)
L.PCM (Audio)
L.PCM 96KHz
Analog
Stereo
Stereo
L.PCM
-
Stereo
L.PCM
L, R
-
Stereo
ANALOG
-
•
When PCM and Analog Stereo signals are input, the
left and right channels are played back in Stereo Mode.
L/R : Front Speaker (Left/Right) C : Center Speaker SL/SR : Rear Speaker (Left/Right) SW : Subwoofer
•
•
2 channel Dolby Digital signal has Dolby Digital Pro Logic. Speaker Setup is set to LARGE, SMALL, or YES.
If there is no surround signal in DVD disk, sound will not output from rear-left speaker, rear-right speaker, center
speaker, and subwoofer.
33
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Radio
Presetting Radio Stations
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual
tuning operation.
You can preset up to 30 FM and AM stations.
REMOTE CONTROL
Ex) If you preset FM 89.1 station in 2ch
Press TUNER button.
1
•
Each time you press this button, FM ❈ AM will be selected in turn.
Press Select button and then TUNING/CH(
select 89.1.
) button to
,
2
•
Refer to step 2, page 35, to tune in automatically and manually.
Press TUNER MEMORY button.
3
4
•
Tuner number will blink on the display.
REMOTE CONTROL
MAIN UNIT
Press INPUT button to select FM or
AM.
1
Press TUNER button.
1
,
Press TUNING/CH(
) button to select preset 2.
•
Each time you press this button, FM ❈ AM will be repetitively
•
You can select from presets 1 to 30.
selected.
Select the frequency.
2
•
Automatic Tuning
:
Select frequency.
Automatic Tuning 1
1) Press ENTER button to select PRESET.
2) Press TUNING/CH(
2
Press and hold TUNING/CH(
) button to
,
•
•
•
:
Press TUNER MEMORY button.
automatically tune in frequency.
5
6
•
Tuner number will disappear and station 89.1 will be saved in preset 2.
,
) button to select the preset
•
Manual Tuning
Press TUNING/CH(
increase or decrease frequency step by step.
:
frequency.
) button briefly to
,
Automatic Tuning 2
:
1) Press ENTER button to select MANUAL
2) Press and hold TUNING/CH(
automatically tune in frequency.
To preset other stations, repeat steps 2 to 5.
) button to
,
Manual Tuning
1) Press ENTER button to select MANUAL.
2) Press TUNING/CH( ) button briefly to increase or
decrease frequency by step by step.
:
To Listen to Preset Station
,
•
Press Select button of the remote control to select the PRESET and press
TUNING/CH ( ) button.
,
To Listen to Mono/Stereo
How to select PRESET, MANUAL
Press MO/ST button on the remote.
1. Press the SETUP button.
•
Each time you press this button, STEREO, MONO will
be selected in turn.
2. Press the INPUT button 8 times.
3. Press the SURROUND button and
select Manual or Preset.
•
If you select MONO in the area with weak reception,
it will help to reduce noise.
•
This function works only with the Remote Control.
•
This function operates only with the main unit.
35
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Sleep Timer Function
You can set the time that this unit will shut itself off.
Reset Function
REMOTE CONTROL
REMOTE CONTROL
Press the MUTE button.
1
2
3
•
MUTE appears on the display.
Press the SLEEP button.
Press “0” button five times and then
press ENTER button.
•
SLEEP : OFF ❈15 ❈30 ❈45 ❈60 ❈90 ❈120MIN will be selected in turn.
Press …† buttons to select “YES”.
To Check Sleep Timer
Press SLEEP button.
The remaining time before this unit will shut itself off is shown on the display.
Pressing the button again changes the sleep time from what you have set earlier.
•
The unit will turn automatically back on in 5 seconds.
•
•
Caution!
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
•
•
To Cancel Sleep Timer
•
Press SLEEP button until SLEEP : OFF appears on the display.
Adjust the Display
You can adjust the brightness of the display.
Mute Function
REMOTE CONTROL
This function is useful when answering a doorbell or telephone call.
Press the DIMMER button.
•
Each time you press this, the brightness of the display will be adjusted.
REMOTE CONTROL
Press the MUTE button.
Using Headphone
Use headphones (not supplied) for private listening pleasure.
•
MUTE appears on the display.
Connect the headphone to the headphone jack and listen to
music.
To Output Sound Again
Press MUTE button again.
•
•
Do not turn the volume up too high when you use headphone.
It may damage your hearing.
•
MUTE will disappear and sound will Output.
•
SLEEP, Mute and Adjust Display function can only be
operated with the remote control.
38
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating TV with Remote Control
TV Brand Code List
Brand
Code Number
Brand
Code Number
Brand
Code Number
ADMIRAL(M.WARDS)
056,057,058
LUXMAN
018
SYLVANIA
018,040,048,054,059,
Press MODE button to make the TV
indicator on the remote control flash.
AMARK
001,015
LXI(SEARS)
019,054,056,059,060,
062,063,065,071
015,017,018,048,054,
059,060,062,072,089
040,054
060,062
1
ANAM
001,002,003,004,005,
SYMPHONIC
TATUNG
TECHWOOD
TEKNIKA
TMK
061,095,096
006,007,008,009,010,
MAGNAVOX
006
011,012,013,014
018
AOC
001,018,040,048
MARANTZ
MATSUI
003,015,018,025
BELL&HOWELL(M.WARDS)
BROCSONIC
CANDLE
057,058,081
054
018,040
059,060
MGA
018,040
TOSHIBA
019,057,063,071,101
Press POWER( ) button to turn on the
TV.
018
MITSUBISHI/MGA
018,040,054,059,060,
075,101
107,109,110,111,113
CETRONIC
CITIZEN
003
VIDTECH
VIDECH
WARDS
018
2
003,018,025
MTC
NEC
018
059,060,069
CINEMA
097
018,019,020,040,059,
060
015,017,018,040,048,
CLASSIC
CONCERTO
CONTEC
CORONADO
CRAIG
003
054,060,064
018
NIKEI
003
YAMAHA
YORK
018
046
ONKING
ONWA
003
040
015
003
YUPITERU
ZENITH
003
Point the remote control toward the TV.
003,005,061,082,083,
084
PANASONIC
006,007,008,009,054,
066,067,073,074
018
058,079
3
ZONDA
001
CROSLEX
CROWN
062
PENNEY
PHILCO
DONGYANG
LOWE
003,054
003
003,015,017,018,048,
054,059,062,069,090
015,017,018,040,048
054,062,072,112,114,
117,118
054
CURTISMATES
CXC
059,061,063
003
FINLUX
054,109,114
PHILIPS
YOKO
054
While holding down POWER( ) button,
enter the code corresponding to your brand
of TV.
DAEWOO
002,003,004,015,016,
017,018,019,020,021,
022,023,024,025,026,
027,028,029,030,032,
034,035,036,040,048,
059,090,099,100
040
LOEWEOPTA
PHONOLA
RADIOLA
SCHNEIDER
AKAI
054,114
054,112,114
4
PIONEER
063,066,080,091
015,018,059
040
054,112
PORTLAND
PROTON
054
103
•
•
If the code matches the TV's code, the TV will be turned off.
If there is more than one code listed for your TV in the table, enter
one at a time to determine which code works.
QUASAR
006,066,067
017,048,056,060,061,
075
GRUNDIG
108,109,113,119,120,
DAYTRON
DYNASTY
EMERSON
RADIOSHACK
121
108
108
113
113
113
114
114
114
114
114
114
114
114
114
116
003
BLAUPUNKT
SIEMENS
CGE
003,015,040,046,059,
061,064,082,083,084,
085
RCA/PROSCAN
018,059,067,076,077
078,092,093,094
003,019
If TV is turned on or off when you press the
power button of the remote control, the
setting is completed.
REALISTIC
SAMPO
IMPERIAL
MIVAR
FISHER
019,065,103
003
040
FUNAI
SAMSUNG
000,015,016,017,040,
043,046,047,048,049,
054,059,060,098
019,061,065,101,102,
103,104
SABA
5
FUTURETECH
GENERALELECTRIC(GE)
003
BANG&OLUFSEN
BRIONVEGA
FORMENTI
METZ
006,040,056,059,066,
067,068
SANYO
•
You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).
HALLMARK
HITACHI
INKEL
040
015,018,050,059,069
045
SCOTT
SEARS
SHARP
003,040,060,061
015,018,019
015,057,064,101,105,
106,115
WEGA
RADIOMARELLI
SINGER
JCPENNY
JVC
056,059,067,086
070
SINUDYNE
TELEFUNKEN
KTV
059,061,087,088
003,015,040
015
SIGNATURE2000(M.WARDS)
057,058
KEC
SONY
050,051,052,053,055,
101
KMC
LG(GOLDSTAR)
001,015,016,017,037,
038,039,040,041,042,
043,044,054,086
SOUNDESIGN
SPECTRICON
SSS
003,040
001
018
•
•
The remote control may not work on some brands of TVs. Also, some operation may not be
possible depending on your brand of TV.
The remote control will work with Samsung TVs by default.
40
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating your VCR (DVD) with Remote Control
VCR Brand Code List
Brand
Code Number
Brand
Code Number
Brand
Code Number
ADMIRAL(M.WARDS)
043,106
MEI
001
001
100
020
,
033
025
TASHIRO
050
047
044
001
001
006
Press MODE button to make VCR indicator
AWIA
044,045,046
088,089,090
001,002,003,004,005,
033
MEMOREX
,
,
033
,
054
,
091
,
TATUNG
,
052
047
033
025
,
092
052
on the remote control flash.
AKAI
TEAC
,
,
,
092
091
1
ANAM
MINOLTA
MITSUBISHI/MGA
MTC
,
021,
062
TECHNICS
TEKNIKA
,
,
049,
•
If you operate DVD, press Device Select button to make DVD
indicator on the remote control flash.
068,
069,
070,
101,
102
092
,
,
033
AOC
091
072
TOSHIBA
,
051
072
AUDIODYNAMIC
BELL&HOWELL(M.WARDS)
BROKSONIC
CANON
019,047,092
MULTITECH
NEC
044,
057
047
091
,
069
TOTEVISION
TAEKWANG
UNITECH
025
087
072
019
019
072
,
048
092
001
,
093
094
033
019,
,
052,057,
,
,
095
OLYMPIC
OPTIMUS
ORION
049
101
103
,
Press POWER( ) button to turn on the
VCR (DVD).
,
,
049,
091
VECTORRESEARCH
VIDEOCONCEPTS
VIDEOSONIC
WARDS
CAPEHART
CITIZEN
011
050
2
3
4
PANASONIC
001
091
019
001
,
004,
033,
049,
067,
CRAIG
050,
072,
096
,
107
001
043
105
019
019
,
020
050
106
,
031,
032,
033
,
CRITERION
CURTISMATHES
051
PENNEY
PENTAX
PHILCO
,
020
020
033
,
072
,
,
054,
072,
100,
001,
031,
032,
033,
044,
,
,
021,
033,
062
,
,
109
091
001,
,
046,
049,
091,
YAMAHA
ZENITH
,
047,048 052,092
,
,
Point the remote control toward the VCR
(DVD).
DAEWOO
006
,
007
012
017
,
008
013
018
,
009,
010
015
051
,
094
,
047,048,052,092
011,
,
,
014,
,
PHILIPS
001,
030,
033,
049,
050,
016
091
011
,
,
,
046,
,
066
025
049
011
,
091
DVD Brand Code List
PILOT
DAYTRON
DBX
PIONEER
PORTLAND
QUASAR
019
025
094
,
047
031
095
048
,
052
032
097
053
,
092
Brand
Code Number
EMERSON
,
,
,
044
098
054
,
046
099
055
,
001,
033,
049,067,091,
While holding down POWER( ) button,
enter the code corresponding to your brand
of VCR (DVD).
,
,
,
,
107,
108
DENON
003,032
FISHER
009
100
044
,
,
,
,
,
RICO
036
DOONOON
DMTECH
FISHER
019
017
002
006
012
RCA/PROSCAN
001
033
070
001
,
020
049
091
009
,
021,
031,
032,
FUNAI
,
,
051,
062,
066,
GENERALELECTRIC(GE)
001
,
031
060
021
,
032,
033,
056,
,
,
104
GE
•
If the code matches the VCR (DVD)'s code, the VCR (DVD) will
be turned off.
091
REALISTIC
,
,
025,
033
,
HARMAN/KARDON
JVC
GOVIDEO
HARMANKARDON
HITACHI
059,
,
061
044,048
,
054,
091,
010
008
001
004
,
013
•
If there is more than one code listed for your VCR (DVD) in the
table, enter one at a time to determine which code works.
019
101,105
000 006
058,071
075 076
080 081
008 009
054 058
092
006
070
020
KENWOOD
LG
020
100
051
,
,
049,
054,
062,
SAMSUNG
,
,
031
072
077
,
032
073
078
,
057
074
079
,
,
,
,
,
MAGNAVOX
MITSUBISHI
ONKYO
HQ
,
,
,
,
,
005,
016
014
If VCR (DVD) is turned on or off when you
press the power button of the remote
controller, the setting is completed.
INSTANTREPLAY
JCL
001,
033,
049,
091
,
004
011
021
006
,
001,
033
SANYO
,
,
046,
048,
050,
OPTIMUS
PANASONIC
PROSCAN
PHILIPS
PIONEER
RCA
JCP
025
,
,
093,
100
5
JCPENNY
047,
048,
052,
062,
091,
SANSUI
SCOTT
092
,
051
100
021
105
,
054
101
025
106
,
057,
069,
004,
023
JVC
001
064
047
019
024
029
020
,
033
065
050
020
025
030
025
054
,
047,
052,
063,
,
,
007,
011,
022,025
•
You can use VCR (DVD) POWER, VOLUME, PLAY, PAUSE,
STOP, SKIP and Numeric button (0~9).
,
,
092
SEARS
SHARP
SINGER
,
,
006
KENWOOD
,
,
052,
092
043,
,
SAMSUNG
SANYO
000,
027
LG(GOLDSTAR)
,
,
021,
022,
023,
096
002
,
,
026,
027,
028,
SIGNATURE2000(M.WARDS)
SHINTOM
SONY
043,
044,
054,
100,
106
SONY
015, 020
011
,
,
050
096
THETADIGITAL
TOSHIBA
YAMAHA
ZENITH
LXI(SEARS)
,
,
044,
048,
050,
034,
035
040
084
,
036
041
085
,
037
042,082
086
,
038,
004, 018
009, 033
004, 024
026
053,
,
055,
062,
100
039,
,
,
,
MAGIN
072
083,
,
,
MAGNAVOX
001
066
001
092
025
,
031
,
032,
033,
049,
STS
020
TAEGWANG
PS2
,
067,
091
SYLVANIA
001
091
044
009
,
033,
044,
049,
066,
028
MARANTZ
MARTA
,
019
110
050
,
033,
047,
052,
X-BOX
029
•
•
The remote control may not work on some brands of VCR (DVD)s.
Also, some operations may not be possible depending on your brand of VCR (DVD).
The remote control will work with Samsung VCRs (DVDs) by default.
,
SYMPHONIC
TANDY
APEX
030
,
MARANTZ
031
41
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Calling for Service
Symptom
Check
Remedy
Check
Remedy
Symptom
•
Connect the power plug to the outlet.
Can't turn it on.
•
Is the power code plugged into the outlet?
Can't select Dolby Pro Logic
ll Mode.
•
•
Select 2 channel Dolby Digital, PCM, and
Analog input signal.
•
•
Is the input signal selected properly?
Is analog input selected?
It does not work when the
button is pressed.
•
Is there static electricity in the air?
•
Disconnect the power plug and connect it
again.
There is no sound when
playing DTS encoded DVD
and CD.
Check whether digital external component
is properly connected and refer to page 19
to select the digital input.
•
Are the speaker and external
component connected properly?
•
•
•
•
Properly connect it.
Press Mute button to cancel the function.
Adjust the volume.
•
•
•
Does the Mute function work?
Is the volume set to minimum?
Sound is not produced.
Refer to pages 17~18 to select LARGE,
SMALL or YES.
Is the speaker setup selected to
NONE?
Picture does not appear when
the function is selected.
•
Isn’t the external component connected
•
Properly connect it.
properly?
•
•
Are the batteries exhausted?
Is the distance between remote
control and main unit proper?
•
•
Replace with new batteries.
Operate at close distance.
Remote controller does not
work.
•
Is the left/right speaker or left/right
input/output code connected
properly?
The sound from each device
is changed during stereo
playback.
•
Check the left/right channel and properly
connect it.
•
Is AM or FM antenna connected
properly?
•
•
Properly connect the antenna.
If the input strength of antenna connector is
weak, install the FM antenna in a place
with good reception.
Can't receive broadcasting.
Product Protection Function
•
Is the surround speaker connected
properly?
•
•
Refer to pages 9~10 to connect it properly.
Heat Protection
Refer to pages 17~18 to select LARGE or
SMALL.
•
Protection function works if the main unit is overheated or power
transformer is overheated.
There is no sound from
surround speaker.
•
•
Is S.SPK (Surround) set to NONE in
Speaker Setup?
appears in the display when the “
works.
- If speaker terminal is shorted
- If speaker cord is shorted
” function
•
Refer to pages 27~34 to select other
Surround Mode.
Is Surround Mode selected to Stereo?
If there is no problem when you turn it on again after turning it
off, PROTECTION mark will disappear on the display and the
unit will work properly.
•
Is the center speaker connected properly?
•
Refer to pages 9~10 to connect it properly.
•
If PROTECTION appears on the display,
check whether speaker terminal is shorted
and then turn on the device.
•
Is C.SPK (Center) selected to NONE in
Speaker Setup?
•
Refer to pages 17~18 to select LARGE or
SMALL.
There is no sound from
center speaker
•
Is the Surround Mode selected to Stereo?
•
Refer to pages 27~34 to select other
Surround Modes.
43
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Supply
120V, 60 Hz
S a m s u n g Lim it e d Wa rra n t y
Standby Power Consumption
Power Consumption
Weight
0.9W
95W
9.25 Ibs
GENERAL
S a m s u n g Ele c t ro n ic s Ca n a d a In c . (S ECA), warrants that this product is
free from defective m aterial and workm anship.
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Frequency Response
Usable Sensitivity
S/N Ratio
Distortion
Stereo Separation
16.9 x 2.6 x 13.7 inches
41°F ~ 95°F
10%~75%
87.5~108.0MHz
12dBf
MONO/STEREO 55/55dB
MONO/STEREO 0.3/0.8%
30dB
SECA further warrants that if this product fails to operate properly within the
specified warranty period and the failure is due to im proper workm anship or
defective m aterial SECA will repair or replace the product at its option.
FM TUNER
AM TUNER
All warranty repairs m ust be perform ed by a SECA authorized service
centre. (The nam e and address of the location nearest you can be obtained by
calling toll free 1 -8 0 0 -7 2 6 -7 8 6 4 or visiting our web site at
w w w .s a m s u n g .c a )
Tuner Output Level
Frequency Response
S/N Ratio
1KHz, 75KHz Dev
522~1611KHz
40dB
Usable Sensitivity
Distortion
Rated Output
Front Speaker(Left+Right)
Center Speaker
Surround Speaker(Left+Right)
Subwoofer
Input Sensitivity/Impedance
S/N Ratio(Analog Input/5.1CH Analog Input)
Separation(1KHz)
60dBµV/m(Loop Antenna)
2% (MOD:80%)
20Hz~20KHz/THD = 10%
4 Ω 100W/CH
4 Ω 100W/CH
4 Ω 100W/CH
4 Ω 100W/CH
450mV/47kΩ
80dB
La b o u r
P a rt s
o n e (1 ) ye a r (c a rry-in )
o n e (1 ) ye a r
On carry-in m odels, transportation to and from the service centre is the
custom er’s responsibility.
AMPLIFIER
The original dated sales receipt m ust be retained by the custom er and is the
only acceptable proof of purchase. It m ust be presented to the authorized
service centre at the tim e service is requested.
60dB
Analog Input/5.1CH Analog Input
Digital Input/96KHz PCM
TV Format
20Hz~20KHz(±3dB)
20Hz ~44KHz(±3dB)
NTSC/PAL
FREQUENCY
RESPONSE
Exc lu s io n s
Input Level/Impedance
Output Level/Impedance
Video Frequency Response
Component Video Frequency Response
S/N Ratio
1Vp-p/75 Ω
1Vp-p/75 Ω
5Hz to 10KHz(-3dB)
5Hz to 40KHz(-3dB)
60dB
This warranty does not cover dam age due to accident, fire flood and/or other
acts of God; m isuse, incorrect line voltage, im proper installation, im proper or
unauthorized repairs, com m ercial use, or dam age that occurs in shipping.
Exterior and interior finish, lam ps and glass are not covered under this
warranty. Custom er adjustm ents which are explained in the instruction
m anual are not covered under the term s of this warranty.
VIDEO
OUTPUT
This warranty will autom atically be voided for any unit found with a
m issing or altered serial num ber. This warranty is valid only on products
purchased and used in Canada.
Speaker system
Front / Surround
4Ω x 4
Center
4Ω
Subwoofer speaker
S
P
E
A
K
E
R
S
Impedance
4Ω
100W
Rated input
100W
100W
Maximum input
Dimensions (W x H x D)
Weight
200W
200W
200W
3.5 x 5.3 x 3.8 inches
1.3 Ibs
7.8 x 4.2 x 3.9 inches 7.8 x 15.8 x 14.1 inches
1.7 Ibs 13.4 Ibs
❈S/N ratio, distortion, separation and usable sensitivity are based on measurement using AES-17 filter.
45
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Contactez SAMSUNG WORLD WIDE
Si vous avez des commentaires our des questions concernant les produits Samsung, contactez le centre
de service à la clientèle SAMSUNG.
Region
Country
Customer Care Center
Web Site
¤
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
1-800-SAMSUNG (7267864)
North America
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
CHILE
800-726-7864(SAMSUNG)
0-800-507-7267
1-800-10-7267
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
1-800-100-5303
Latin America
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
BELGIUM02
CZECH REPUBLIC
DENMARK
FINLAND
201
2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (0,15€/Min)
01805 - 121213 (€ 0,12/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0.10/Min)
231 627 22
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
Europe
POLAND
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
RUSSIA
UKRAINE
AUSTRALIA
CHINA
HONG KONG
08 585 367 87
0870 242 0303
8-800-200-0400
8-800-502-0000
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
CIS
3030 8282
1600 1100 11
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
Asia Pacific
THAILAND
02-689-3232
TAIWAN
0800-329-999
800
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
889
VIETNAM1
SOUTH AFRICA
U.A.E
588
Middle East & Africa
Download from Www.Somanuals.com. All Manuals Search And Download.
|