SCC-B1331(P)
SCC-B1031P
DIGITAL COLOR CAMERA
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
CAUTION
1. Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to
excessive vibration or magnetic interference.
2. Do not install in a location subject to high temperature (over 140°F), low temperature (below -14°F), or high
humidity. Doing so may cause fire or electric shock.
RTS
3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall
it.
4. Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause fire or
damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
tant
e
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the
CCD image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference that may cause undesired operation.
r
Caution
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
er on
use
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian Interference.-
Causing Equipment Regulations of ICES-003.
ify
or
ck.
English – 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
WARNING
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus.
13.Unplug this apparatus when a card is used. Use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus
4 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
Features
PRODUCT & ACCESSORIES
Part Names and Functions
6
7
8
Installation
Connecting the Auto Iris Lens Connector
Mounting the lens
Connecting cables and checking operation
11
11
12
How to use OSD Menu
es
wide
sult
Using Icons in the Menu
Main Menu
13
13
14
16
22
23
24
25
25
Profile
Camera Setup
Intelligence
Privacy zone Setup
Other Set
System Information
Language
and
Specifications
have
y, or
Specifications
26
th
English – 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
❖ P
FEATURES
❖ High Resolution
•
•
This camera has realized high resolution of 600 lines using the top-notch full digital image processing and
special algorithm technologies.
•
❖ Intelligent Motion Detection & Tracking
•
This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it
sounds an alert if an object passes / enters /exits the virtual fence or virtual area.
❖ XDR (eXtended Dynamic Range)
•
Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a
certain pixel unit to determine the optimal visibility.
❖ High Sensitivity
It implements images of high sensitivity using the up-to-date SONY Super-HAD Progressive CCD.
Low Illumination
•
❖
•
It uses the digital signal technologies such as low illumination and Day/Night functions that make your camera
identify objects even in the worst environment.
❖ Superior Backlight Adjustment
•
When an object has a bright illumination or sunlight behind it, this camera automatically improves the
shaded object picture quality.
❖ Digital Power Synchronization
•
The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the
operationability and reliability of this camera.
❖ Output Signal Setting
•
You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy,
Horizontal/Vertical profiling, and digital zooming.
❖ OSD(On Screen Display) Menu
OSD menu is provided to display the status of camera and to configure the functions interactively.
•
Came
❖ Coaxial Cable Communication
•
This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the
control signal. In installation or repair, this helps you control the communication controller (optional) without
additional cabling.
PRODUCT & ACCESSORIES
6 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
❖ Product & Accessories
•
•
Accessories
and
t
Main Product
ra
Camera
C Mount Adapter
User’s Manual
Camera Holder(Mount)
Auto Iris
Lens Connector
t
English – 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
❖ R
PART NAMES AND FUNCTIONS
❖ Side View
Mount Adapter
Fixing Grooves
Auto Iris Lens
Connector
Camera Lens
Auto Iris Lens
Control Cable
•
•
•
Auto Iris Lens Connector
This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed.
Auto Iris Lens Control Cable
This cable transmits the power and signals from the camera for controlling the Auto Iris Lens.
Mount Adapter Fixing Grooves
These grooves are used when fixing screws of the mount adapter connected to the bracket when installing
the camera on it.
Note :
–
When the camera lens becomes dirty, softly clean it with a lens tissue or a cloth soaked in pure ethanol.
8 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
❖ Rear Panel
<AC24/DC12V (SCC-B1331(P))>
n
o
q
p
r
s
alled.
ing
<AC220V~240V(SCC-B1031P)>
n
s
o
p
q
English – 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
This connector has input and output ports for, DAY/NIGHT switching,
and alarm output signals.
n
Input/Output Connector
CO
CO
No.
Function
Description
1
2
ALARM OUT
GND
Alarm out port for motion detection. (Open collector type)
Grounding Port.
Displays the current still image when it receives the Trigger signal.
(Normal Open Type)
3
4
5
TRIGGER IN
SHUTTER (S0)
SHUTTER (S1)
This is a port for selecting an external high speed shutter mode.
Conn
the A
If connected in LOW (0V), it will become ON inside.
This is a port for selecting an external high speed shutter mode.
If connected in LOW (0V), it will become ON inside.
This is a port for selecting an external high speed shutter mode.
P
N
6
7
SHUTTER (S2)
5V OUT
If connected in LOW (0V), it will become ON inside.
Use within typical DC +5V 100mA
1
2
3
4
o
SETUP Switch
This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the
MAIN MENU appears.
ef (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the
displayed value.
cd (Up/Down) : By pressing this switch up or down, you can move up or down on the menu.
No
–
‹
: When you press this switch in the menu, the selected function is confirmed. To enter a submenu, press
this button.
p
q
r
s
Power Display LED
When the power is normally connected, the red LED lights.
Video OUT Port
This is connected to the Video Input Port of the monitor and it outputs the Video signals.
GND
This is a grounding port.
Power Connection Port
This is connected to the Power cable.
10 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
MOUNTING THE LENS
CONNECTING THE AUTO IRIS LENS
CONNECTOR
When using the CS lens
Mount the CS lens by rotating it clockwise as shown
in the picture:
CS lens
Connect each uncovered shutter control cables to
the Auto Iris Lens Connector as the following
When using the C lens
Pin
No.
DC Control
Type
After mounting the C-mount adapter by rotating it
clockwise, turn the C lens clockwise until it is fixed as
shown in the picture.
Video Control Type
1
2
3
4
Damp(-)
Damp(+)
Drive(+)
Drive(-)
Power (+12V)
Not applicable
Video Signal
Ground
he
C 렌즈
C lens
e the
Note :
ress
–
You can switch a control type of the lens in the menu.
English – 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
CONNECTING CABLES AND
CHECKING OPERATION
USI
•
ꢀ
E
③
Finally connect the power adapter to the
camera. You can connect 2 lines of the power
adapter to the camera using the Slot Head
screwdriver as shown in the picture.
①
Connect one end of the BNC cable to the
VIDEO OUT Port on the rear of the camera.
B
sa
•
•
ꢁ
② Connect another end of the BNC cable to the
VIDEO IN Port on the monitor.
(GND: cable with the white stripe line)
R
ꢂ
R
•
ꢃ
U
P
O
e
1
2
3
4
.
.
.
.
A
L
A
R
G
A
M
N
O
D
U
T
S
T
R
5
6
7
8
IG
.
.
.
.
G
S
S
H
H
E
U
U
H
R
T
T
U
I
T
T
T
N
E
T
R
E
(S
R
1
(S
)
O
5V
ER
)
O
(
S
U
2)
D
T
A
Y
/N
IG
H
T
I
N
1
2
•
ꢄ
3
4
5
6
7
8
U
P
O
re
Video In Terminal of Monitor Rear
Surface
1.
2.
3.
4.
A
LA
R
G
A
M
N
O
U
D
TR
SH
T
IG
5.
6.
7.
8.
SH
G
E
U
U
U
R
IN
S
5
TT
TT
H
ER
ER
(S
(S
(S
TTE
1)
2)
O
V
R
)
O
U
D
T
A
Y
/N
IG
H
T
IN
BNC cable
1
2
3
4
5
6
7
8
Video Out Terminal
Note :
–
Connect any power source of AC 24V and DC 12V
irrespective of polarity.
12 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
USING ICONS IN THE MENU
MAIN MENU
•
ꢀ (EXIT)
ÃÃMAIN MENUÃÃ
PROFILE
CAMERA SETꢅ
INTELLIGENCEꢅ
PRIVACY ZONEꢅ
OTHER SETꢅ
Exits the menu setting.
ꢅ
Before you exits the menu setting, select SAVE to
save your settings, or select QUIT to cancel.
wer
•
•
ꢁ (RET)
Returns to the previous menu.
SYSTEM INFOꢅ
LANGUAGEꢅ
ꢂ (HOME)
Returns to the main menu.
ꢃ (SAVE)
ꢀ
•
Used to save your settings of MASK AREA,
PRIVACY ZONE and more.
Once you save your settings, they will remain
even if you select QUIT in the menu.
•
PROFILE
You can set a mode according to the camera
installation conditions.
•
ꢄ (DEL)
•
•
CAMERA SET
Used to deletes your settings of MASK AREA,
PRIVACY ZONE and more.
Once you delete your settings, they will not be
restored even if you select QUIT in the menu.
Configure Camera related functions and data.
INTELLIGENCE
You can configure the settings of motion
detection, tracking and more.
•
•
PRIVACY ZONE
You can configure the privacy related settings.
OTHER SET
You can configure for Factory Defaults, and more.
•
•
SYSTEM INFO.
Displays the system information including the
camera version and communication settings.
LANGUAGE
Select a preferred one from the supported
languages.
English – 13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
PROFILE
ePROFILEf
Pr
M
Ã
STANDARD
ITS
WH
BACKLIGHT
DAY/NIGHT
GAMING
CUSTOM
ꢁ
ꢀ
D
In the PROFILE menu, you can configure the following camera settings at once.
CAMERA SET Menu
STANDARD
ITS
BACKLIGHT
GAMING
Previous
Menu
Sub-menus
IRIS
ALC
-
ALC
-
ALC
ALC
-
ALC
-
DC
0
LENS
DC
0
DC
0
DC
0
LEVEL
BACKLIGHT
OFF
OFF
-
OFF
User setting
allowed
User setting
allowed
User setting
allowed
WEIGHT
WDR LEVEL
WHITE BAL
MID
0
❖
IT
User setting
allowed
User setting
allowed
User setting
allowed
It w
User setting
allowed
User setting
allowed
User setting
allowed
User setting
allowed
❖
B
AGC
DNR
VERY HIGH
MID
VERY HIGH-
MID
VERY HIGH
MID
VERY HIGH
MID
It w
SHUTTER
XDR
OFF
AUTO1/250
MID
OFF
OFF
MID
MID
MID
❖
G
It w
14 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
CAMERA SET Menu
STANDARD
ITS
BACKLIGHT
GAMING
Previous
Menu
Sub-menus
WHITE BAL
DAY
DAY/NIGHT
DAY
DAY
DAY
-
-
-
-
MODE
RED
ATW2
ATW1
ATW1
ATW1
0
0
2
0
0
2
0
0
2
0
0
2
BLUE
DETAIL
❖
ITS
It will be set automatically so you can easily check the traffic conditions.
❖
BACKLIGHT
It will be set automatically so you can distinguish the object from the background in a severe backlighting scene.
❖
GAMING
It will be set automatically to help you take a picture in a regular indoor lighting condition.
English – 15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
CAMERA SETUP
❖
CAMERA ID
[OFF, ON]
eCAMERA SETf
‹CAMERA ID‹
CAMERA ID
IRIS
OFF
ALCꢅ
VERY HIGH
MID
ABCDEFGHIJKLMNOPQRSTUVWXYZ0
123456789 :?-+*()/
AGC
DNR
②
SHUTTER
SENS-UP
FLICKERLESS
XDR
OFF
AUTO X4
OFF
MID
OFF
ꢀ
SPffeeSP LOCATIONꢅ
CAMERA-1..................
DIS
ꢁ
...........................
ꢁ
ꢂ
ꢀ
d
c
The CAMERA ID menu is used for you to assign
a unique name to a camera. If you press the
SETUP switch with the CAMERA ID menu
selected, you will see the appropriate screen.
WHITE BAL
ꢅ
OFF
[2]
INT
LOW
OFF
+
DIGITAL ZOOM
DETAIL
V-SYNC
AGC COLOR SUP
REVERSE
POSI/NEGA
PIP
You can enter up to 54 alphanumeric or
special characters for the CAMERA ID. Select
LOCATION and press the SETUP switch to
move the display position of the CAMERA ID.
OFF
ꢀ
ꢁ
❖
IRIS
[ALC, ELC]
The IRIS menu is used if you want to adjust the
intensity of radiation incoming to the camera.
Setup the general functions of zoom camera module.
•
ALC (Automatic Light Control)
Use the cdef switch to select a menu item.
① If you press the SETUP switch with an ALC-
based sub menu selected, you will see the
appropriate screen.
–
‹ALC‹
LENS
LEVEL
DC
[00]----I----
OFF
•
EL
BACKLIGHT
①
ꢁ
ꢂ
ꢀ
The LENS menu is used if you select a type of
the AI lens.
For normal operation, you must select DC for a
DC-type lens, and select VIDEO for a VIDEO-
type lens.
16 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
‹ELC‹
LEVEL
BACKLIGHT
[00]----I----
OFF
The LEVEL menu is used to adjust the
overall brightness, where “+” will increase the
brightness and “–” will decrease it.
② If you set the BACKLIGHT option to BLC,
you will see a menu where you can set the
BLC area.
ꢁ
ꢂ
ꢀ
you can set the desired BLC zone by defining
the size and location.
② In similar to ALC setting, you can specify the
‹ALC‹
BLC area.
sign
ct
LENS
DC
[00]----I----
BLC
LEVEL
BACKLIGHT
AREA
‹ELC‹
USER
LEVEL
BACKLIGHT
AREA
[00]----I----
BLC
<SIZE>ꢅ
<LOCATION>ꢅ
USER
<SIZE>ꢅ
<LOCATION>ꢅ
ꢁ
ꢂ
ꢀ
D.
ꢁ
ꢂ
ꢀ
If you use an ordinary camera in a scene
with an intensive backlight, the object will be
displayed dark on the monitor affected by the
backlight. To solve this problem, you can use
the BLC(Back Light Compensation) function
to improve the sharpness of the image in
such a high contrast scene.
he
❖
AGC
[OFF, VERY LOW, LOW, MID, HIGH, VERY
HIGH, USER]
LC-
e
The AGC (Auto Gain Control) menu is used to
set the AGC level of the camera. When the AGC
is active, the camera automatically increases the
sensitivity by amplifying the Video signal when
the strength of the signal falls below the normal
value.
–
•
ELC (Electronic Light Control)
①
If you press the SETUP switch when the ELCꢅ
submenu is selected, the corresponding screen
appears. You can make the ELC (Electronic Light
Control) function active or not.
If you press the SETUP switch with a USER
sub menu selected, you will see the appropriate
screen.
e of
or a
O-
English – 17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
❖
SHUTTER
‹AGC USER‹
[16]
[OFF, AUTO 1/100(PAL:1/120), AUTO 1/250,
AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO
1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT]
LEVEL
The SHUTTER menu is used to set the fixed
high-speed electronic shutter, auto high speed
electronic shutter and external high speed
electronic shutter(EXT).
No
–
ꢁ
ꢂ
ꢀ
You can select one of 7 options from 1/100(PAL:1/120)
to 1/10K for the fixed high speed electronic shutter,
which is mostly used for imaging a fast moving object.
–
–
In USER mode, you can break down the level in
16 steps from VERY LOW to VERY HIGH to your
preference.
The auto high speed electronic shutter operates
as the fixed high speed shutter in a high contrast
scene but automatically focuses the target if the
iris opens fully in a low contrast scene like in ELC
mode. When it gets brighter back, the mode will
switch to the fixed high speed electronic shutter
mode.
‹AGC FIX‹
LEVEL
[01]
A
d
e
b
However, the auto high speed shutter operates
properly only in a camera featuring a DC or VIDEO
lens.
❖
F
ꢁ
ꢂ
ꢀ
If
1
d
fr
In external high speed electronic shutter (EXT)
mode, you can select one of 8 modes from OFF
through 1/100(PAL:1/120) to 1/10K for the high
speed electronic shutter. It works as the high
speed electronic shutter. You can select an
option using SHUTTER(S0), SHUTTER(S1) and
SHUTTER(S2) on the rear.
If you press the SETUP switch with a FIX sub
menu selected, you will see the appropriate screen.
❖
X
[O
As a fixed value of the AGC gain is used in FIX
mode, you can select one of the 16 detailed levels
from VERY LOW to VERY HIGH before fixing it.
A
w
in
v
Connect each of the terminals to GND.
.
See the below table for the operation.
❖
DNR
[OFF,LOW,MID,HIGH, USER(1~16)]
S
C
le
You can configure the DNR (Digital Noise
Reduction) related settings.
SHUTTER(S0) SHUTTER(S1) SHUTTER(S2)
OFF
Reduces the noise on the screen.
This is especially useful for a severely distorted
screen.
(NTSC: 1/60,
PAL:1/50)
OFF
ON
OFF
OFF
OFF
OFF
❖
W
If
W
1/100
(PAL:1/120)
You can set the level if you set DNR to USER.
•
DA
1/250
1/500
OFF
ON
ON
ON
OFF
OFF
ON
In
R
c
1/1000
OFF
OFF
18 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
‹WHITE BAL‹
1/2000
1/4000
1/10K
ON
OFF
ON
OFF
ON
ON
ON
ON
ON
DAY/NIGHT
MODE
DAY
AWCꢅ
UTO
0,
RED
[00]----I----
[00]----I----
[0248]
BLUE
R-GAIN
B-GAIN
[0247]
Note :
d
–
If IRIS mode is set to ELC, the SHUTTER menu will be
deactivated as you adjust the brightness using the
electronic shutter.
ꢁ
ꢂ
ꢀ
/120)
r,
–
–
If the SENS-UP function is set to AUTO, only items of
Note :
OFF and AUTO are available in the SHUTTER menu.
ect.
–
You can set the values of R-GAIN and B-GAIN only in
AWC mode.
If the FLICKERLESS function is set to ON, the SHUTTER menu
will be deactivated.
es
ast
e
LC
will
er
–
If AGC is set to OFF or FIX, you can not access the
NIGHT menu.
Automatically detects the ambient level of
darkness in the dark or low contrast scene to
extend the accumulated time, keeping the image
bright and sharp;
–
For adjusting the white balance, the following
5 modes are provided:
•
ATW1(Auto Tracing White Balance mode
1): The camera can automatically adjust the
color temperature in real time, according to
the ambient conditions. The color temperature
ranges from approx. 2500K to 9300K.
s
❖
FLICKERLESS
[OFF, ON]
DEO
If set to ON, the shutter speed will be fixed to
1/100(PAL:1/120) second. This will prevent possible screen
distortion due to a mismatch between the vertical sync
frequency and the blinking frequency of the lighting.
•
•
ATW2: The color temperature ranges from
FF
h
approx. 2,000K to 10,000K.
AWC ( Auto White Balance Control): If you
press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.
❖
XDR (eXtended Dynamic Range)
[OFF, LOW, MID, HIGH]
d
Actively controls the gamma compensation in the
way it operates the ambient luminance contrast
in a certain pixel unit to determine the optimal
visibility.
•
•
3200K : Set color temperature to 3200K
5600K : Set color temperature to 5600K
–
–
–
RED : Adjusts the strength of the red color.
Select one from OFF, LOW, MID and HIGH.
Closing to HIGH will increase the compensation
level.
BLUE : Adjusts the strength of the blue color.
R(S2)
R-GAIN/B-GAIN : Enables you to set the current
color temperature manually.
F
❖
WHITE BAL
[DAY/NIGHT]
–
–
BRIGHTNESS : Select a brightness level in
switching from setting in DAY mode to setting in
NIGHT mode.
If you want to adjust the color scheme, use the
WHITE BALANCE function.
F
•
DAY
F
F
In DAY mode, you can set the color values of
RED and BLUE. The screen will be displayed in
colors according to your settings.
English – 19
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
❖
DIGITAL ZOOM
[ON/OFF]
❖
REVERSE
[OFF, H, V, H/V]
INT
You can set the digital zoom factor and position.
If you press the SETUP switch with the DIGITAL
ZOOM function set to ON, you will see the
appropriate screen.
Mirrors video signals horizontally, vertically, or
both.
❖
POSI/NEGA
[+, -]
Output as it is or mirror the video brightness
signal.
When the zoom factor and position are defined,
the digital zoom function will operate.
❖
PIP
[OFF, ON]
‹DIGITAL ZOOM‹
Displays a sub image together with the main
image on the same screen using the Picture In
Picture function.
RATIO
[X1.0]
< LOCATION >
ꢅ
You
INTE
Note :
–
If more than one privacy zone is set and the PRIVACY
SET is set to ON, the PIP function will be deactivated.
❖
M
–
If the INTELLIGENCE function is set to FENCE mode, the
PIP menu will be deactivated.
ꢁ
ꢂ
ꢀ
•
TR
De
❖
DIS
[OFF, ON]
-
LOCATION : If you press the SETUP switch in the
condition where the image is enlarged as much as the
ratio setting, you can watch an invisible area of the
effective screen as well using the cdef switch.
Digital Image Stabilization will set the anti-shake
compensation.
•
DE
De
Note :
Note :
–
If you set DIS to ON, the compensation area will be
enlarged as set in the digital zoom factor.
If you set the digital zoom factor to greater than the
enlarged zoom factor for the compensation, the DIS
function will be deactivated.
❖
M
S
–
The DIGITAL ZOOM function enlarges the pixel itself, which can
cause deterioration of the quality.
S
p
❖
DETAIL
[0~3]
Controls the horizontal or vertical distinction.
❖
V-SYNC
[INT, LINE]
Select the vertical sync mode for INT or LINE.
If you select INT, the camera will use the internal
synchronization.
If selecting LINE, the camera will use the external
power source frequency for the synchronization.
You can adjust the LL-PHASE.
Note :
❖
❖
D
–
Use of DC 12V will fix V-SYNC to INT, which can not be
changed.
W
fu
d
❖
AGC COLOR SUP
[LOW , MID, HIGH]
Adjust the color scheme according to the AGC
value.
S
20 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
Set the sensitivity of the motion detection.
INTELLIGENCE
r
❖
RESOLUTION
[1~5]
eINTELLIGENCEf
MOTION
MASK AREA
DISPLAY
SENSITIVITY
RESOLUTION
ALARM OUT
OFF
2 3 4
ON
If setting it to high, the camera can detect even a
trivial movement of the target.
1
[4]
[5]
❖
ALARM OUT
ꢅ
If you set a desired menu item to ON, the camera
will sound an alert if it detect the appropriate
motion.
ꢁ
ꢀ
n
You can set the motion detection and tracking in the
INTELLIGENCE menu.
‹ALARM OUT‹
Y
d.
MOTION
ON
❖
MOTION
[OFF,TRACKING,DETECTION]
the
•
TRACKING
Detects and tracks a moving object.
ꢁ
ꢂ
ꢀ
•
DETECTION
Detects a moving object.
❖
MASK AREA [1~4]
Specify a detection exception area to mask.
Select a mask number and specify the size and
position.
‹
MASK AREA‹
<SIZE>
ꢅ
<LOCATION>ꢅ
ꢁ
ꢃ
ꢄ
ꢂ
ꢀ
❖
❖
DISPLAY
[ON, OFF]
With the DISPLAY option set to ON, a motion
function will be displayed on the screen, if
detected.
SENSITIVITY
[1~7]
English – 21
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
PRIVACY ZONE SETUP
OTH
‹PRIVACY ZONE SET1‹
PIXEL LEVEL [4]
<POINT>ꢅ
<POSITION>ꢅ
ePRIVACY ZONEf
1
2
3
4
5
6
7
8
9
10 11 12
PRIVACY SET
STYLE
ON
MOSAIC1
ꢁ
ꢃ
ꢄ
ꢂ
ꢀ
ꢁ
ꢀ
- How to set the point
You can set each position of the 4 points.
The PRIVACY function will protect your privacy by
screening the privacy area that you have specified
during monitoring. You can specify up to 12 privacy
zones.
① If you press the SETUP switch in <POINT>,
you will see the points available in the
❖
❖
F
A
d
PRIVACY ZONE. Each time you press the
SETUP switch, the points available will move.
If you set the PRIVACY SET to ON, your PRIVACY
ZONE settings will be applied.
② Use the cdef switch to set the position
of each point. Set each position of the four
points and press the SETUP switch to
complete the positioning.
O
You can change the style to adjust the mosaic size
and color of the PRIVACY ZONE.
Y
C
- How to set the position
ePRIVACY ZONEf
You can move the position of the overall area.
1
7
2
8
3
9
4
5
6
① By pressing the SETUP switch in
<POSITION>, you can move the overall
position of the privacy zone.
10 11 12
PRIVACY SET
STYLE
Y-LEVEL
RED
BLUE
ON
COLOR
[128]
[128]
[128]
② Use the cdef switch to move the
position and press the SETUP switch to
confirm it.
ꢁ
ꢀ
Note :
–
If more than one PRIVACY ZONE is specified and the
PRIVACY SET is set to ON, the PIP function will be
deactivated.
Use the cdef switch to select one from
PRIVACY 1 through 12.
–
If the 12th PRIVACY ZONE is specified, the LINE function
of FENCE will be deactivated.
Select one from PRIVACY 1~12 and press the
SETUP switch to confirm your setting. You can
specify a pixel that moves as you change the PIXEL
LEVEL to set the position.
22 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
SYSTEM INFORMATION
OTHER SET
eOTHER SETf
FACTORY DEFAULTS
OSD COLOR
eSYSTEM INFOf
ꢅ
BW
TYPE
3_BOX_WDR_N
SERIAL NO. 000000000000000
CAMERA VER.
0.50_090101
ꢁ
ꢀ
ꢁ
ꢀ
You can view the system information including,
camera version
T>,
❖
❖
FACTORY DEFAULTS
All the settings will be restored to the factory
default.
e
ove.
LANGUAGE
tion
ur
OSD COLOR
[BW, R/G/B]
eLANGUAGEf
You can set the OSD(On-screen Display) color to
COLOR or B/W.
ÃENGLISH
FRANÇAIS
ESPAÑOL
日文
a.
INGLÊS
ꢁ
ꢀ
The camera supports 5 different languages.
Select a preferred language.
e
ction
English – 23
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use OSD Menu
S
SPE
❖ Initial Configuration Table
•
Camera Configuration
CAMERA ID
OFF
ALC
VERY HIGH
MID
IRIS
AGC
DNR
SHUTTER
FLICKERLESS
XDR
OFF
OFF
MID
DIGITAL ZOOM
DETAIL
OFF
[2]
AGC COLOR SUP
REVERSE
POSI/NEGA
PIP
MID
OFF
+
OFF
DIS
OFF
24 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SPECIFICATIONS
Items
Camera Type
Sub-items
SCC-B1331N
CCTV Camera (WDR & DAY/NIGHT)
Device
1/3” Super-HAD IT CCD
811 x 508
Image
Total
Pixels
Effective
768 x 494
System
Scanning Line
Frame
Interlace/Progressive
525 lines
30frame/1sec
15,734 Hz
Scanning
Internal Mode
Line-lock Mode
Internal Mode
Line-lock Mode
Condition
Horizontal
Frequency
15,750 Hz
59.94 Hz
Vertical
Frequency
60 Hz
Min. Scene illumination
Sens-up
OFF
OFF
F No.
1.2
1.2
Level
DAY
0.4
0.24
NIGHT
0.4
0.24
Min. Scene
Illumination
50
30
IRE
IRE
Lux
Lux
Lux
Lux
OFF
1.2
15
IRE
0.12
Lux
0.12
Lux
Number of Privacy Zone
12 (Polygonal Method)
OFF/Tracking/Detection
Off/On (Level Setting)
x1 ~ x16 (x0.1 STEP)
Off/On
Motion Detection
eXtended Dynamic Range(XDR)
D-Zoom
PIP
High Speed Shutter
Flickerless
1/60 ~ 1/10Ksec (OSD/External Control)
Off/On
Sens-Up
x2 ~ x512
BLC
Off/On (Area Setting)
Off/On (Max.Level Setting)
Off/On ( ~ 1/200K sec)
Off/On (Phase Control)
Off/On (Max.54ea/2Line)
ATW1/ATW2/AWC/3200K/5600K
Off/On (Adaptive 3D+2D)
Off/On
Functions
AGC
ELC
Line Lock
Camera ID
White Balance
Digital Noise Reduction(DNR)
Digital Image Stabilization(DIS)
Intelligent Video
Etc. Function
Horizontal
Fixed/Moved, Fence
Detail, Reverse(H/V), Posi/Nega
600 TV Lines
Resolution
Vertical
350 TV Lines
Video Output
S/N Ratio
-
VBS 1.0Vp-p, 75 Ω
Approx. 52dB
S/N Ratio
English – 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Items
Sub-items
Lens Drive Type
Mount Type
Input
SCC-B1331N
MANUAL/AI(VIDEO/DC)
CS/C
Lens
N/A
Alarm
Output
1 Output
Remote
Control
Coaxitron (Data On Coax cable)
Yes (with SCX-RD100)
Operating Temperature
Humidity
-10˚C ~ +50˚C
Less than 90%
Environmental
Conditions
AC24V 10%(60Hz 0.3Hz)
DC12V 10%
Power Requirement
Power
In normal operation : 2.6W
In switching the DAY/NIGHT filter : 3.2W
Yes
Power Consumption
(With DC Lens)
LED Indicator
Net
64(W) x 58(H) x 109.2(D) mm
173(W) x 99(H) x 115(D) mm
Dimensions
(WxHxD)
Package
Physical
Specification
Net
Weight
305g
530g
Silver
Package
Color
Body
26 – DIGITAL COLOR CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Items
Sub-items
SCC-B1331P / SCC-B1031P
Camera Type
CCTV Camera (WDR & DAY/NIGHT)
Device
1/3” Super-HAD IT CCD
795 x 596
Image
Total
Pixels
Effective
752 x 582
System
Scanning Line
Frame
Interlace/Progressive
625 lines
25frame/1sec
15,625 Hz
Scanning
Internal Mode
Line-lock Mode
Internal Mode
Line-lock Mode
Condition
Horizontal
Frequency
15,625 Hz
50 Hz
Vertical
Frequency
50 Hz
Min. Scene illumination
Sens-up
OFF
OFF
F No.
1.2
1.2
Level
DAY
0.4
0.24
NIGHT
0.4
0.24
Min. Scene
Illumination
50
30
IRE
IRE
Lux
Lux
Lux
Lux
OFF
1.2
15
IRE
0.12
Lux
0.12
Lux
Number of Privacy Zone
Motion Detection
eXtended Dynamic Range(XDR)
D-Zoom
12 (Polygonal Method)
OFF/Tracking/Detection
Off/On (Level Setting)
Max. x16
PIP
Off/On
High Speed Shutter
Flickerless
1/50 ~ 1/10Ksec (OSD/External Control)
Off/On
Sens-Up
x2 ~ x512
BLC
Off/On (Area Setting)
Off/On (Max.Level Setting)
Off/On ( ~ 1/200K sec)
Off/On (Phase Control)
Off/On (Max.54ea/2Line)
ATW1/ATW2/AWC/3200K/5600K
Off/On (Adaptive 3D+2D)
Off/On
Functions
AGC
ELC
Line Lock
Camera ID
White Balance
Digital Noise Reduction(DNR)
Digital Image Stabilization(DIS)
Intelligent Video
Etc. Function
Fixed/Moved, Fence
Detail, Reverse(H/V), Posi/Nega
English – 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Items
Image
Sub-items
Device
SCC-B1331P / SCC-B1031P
1/3” Super-HAD IT CCD
600 TV Lines
Horizontal
Resolution
Vertical
350 TV Lines
Video Output
S/N Ratio
-
S/N Ratio
VBS 1.0Vp-p, 75 Ω
Approx. 52dB
MANUAL/AI(VIDEO/DC)
CS/C
Lens Drive Type
Mount Type
Lens
Input
N/A
Alarm
Output
1 Output
Coaxitron (Data On Coax cable)
RS-485
Yes (with SCX-RD100)
Yes (Multi Protocol, 8ea)
-10˚C ~ +50˚C
Less than 90%
Remote
Control
Operating Temperature
Humidity
Environmental
Conditions
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|