Compact
& Clear
High Resolution Day & Night Dome Camera SID-45C/46C User’s Manual
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
•
•
•
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
TEL : +82-31-740-8137~8139 FAX : +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
P/No. : Z6806-0671-01B
VAN 06. 07
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco mark
represents Samsung Techwin s will to create environment-friendly products,
and indicates that the product satisfies the EU RoHS Directive.
Features
Horizontal Resolution 530 TV Lines
High Sensitivity
Clear image quility has been achieved by
employing a CCD with 410,000 pixels(NTSC),
470,000 pixels(PAL) and optimized WINNER3
DSP CHIP which provides a horizontal resolution
of 530 TV lines.
The built-in high sensitivity COLOR CCD
enables a clear image even in 0.002Lux
(Sens-up) or lower illumination.
Warnings & Cautions
This information is provided to ensure your safety and to prevent any losses, financial or
otherwise. Please read it carefully and use the product accordingly.
Warning/Attention/Special Mark Messages
SSNR (Samsung Super Noise
Reduction)
Electronic DAY & NIGHT
This camera has a function that electronically
selects the mode that is appropriate for daytime
or night-time conditions. The COLOR mode
operates in daytime conditions to provide
optimum colors, and BW mode operates in
night-time conditions to enhance the definition
of the image.
By using built-in SSNR function manufactured
by SAMSUNG TECHWIN, the amount of low
illuminance noise has been significantly
reduced, and the signal-to-noise ratio (S/N)
as well as horizontal resolution have been
improved, resulting in a clear and sharp
image display even in the dark.
Ignoring this information may result in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Indicates “No Disassembling.”
Indicates Must Observe.
PRIVACY Function
Controlled by OSD Menu
The PRIVACY function conceals the areas
you do not wish to appear on the screen.
The camera can be controlled by selecting
text displayed on the monitor screen.
Pan and Tilt
Additional Functions
Pan and tilt are available after installing
camera.
SENS-UP, MOTION DETECTION, MIRROR,
SHARPNESS and SYNC(INT/LL) functions
are also available.
Download from Www.Somanuals.com. All Manuals Search And Download.
Co ntents
Precautions
8
17
Camera Operation
17
18
19
Menu
Setting
10
11
Composition
• SHUTTER (condition and speed control)
20
22
23
• WHITE BALANCE control
• BACKLIGHT (Backlight Compensation)
• AGC (Auto Gain Control)
Name and Function of Each Part
Front
Back
11
12
• SSNR (Samsung Super Noise reduction)
• SPECIAL
24
26
13
Installation
32
34
35
Troubleshooting
Specification
Dimension
Installing Camera
13
14
15
16
Connecting To Monitor
Connecting To Power
Panning & Tilting Control
Download from Www.Somanuals.com. All Manuals Search And Download.
Prec autio ns
Do not install the camera in
extreme temperature conditions.
Do not install or use the camera in an
environment where the humidity is high.
Do not touch the front lens of
the camera.
Never keep the camera face to
strong light directly.
Only use the camera under conditions
where temperatures are between -10˚C
and +50˚C. Be especially careful to provide
ventilation when operating under high
temperatures.
It can cause the image quality to be poor.
It is one of the most important parts of
the camera. Be careful not to be stained
by fingerprint.
It can damage the CCD.
Do not drop the camera or
subject them to physical shocks.
Do not expose the camera to
rain or spill beverage on it.
Do not install the camera under
unstable lighting conditions.
Never use the camera close to a
gas or oil leak.
It can cause malfunctions to occur.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that corrode
the electronic components.
Severe lighting change or flicker can
cause the camera to work improperly.
It can cause malfunctions to occur.
Notes
• If the camera is exposed to spotlight or object reflecting strong light, smear or
blooming may occur.
Do not disassemble the camera.
• Please check that the power satisfies the normal specification before connecting
the camera.
There are no user-serviceable parts inside it.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
8
9
Co m p o sitio n
Nam e and Func tio n o f Eac h Part
FRON T
1. HIGH RESOLUTION DAY & NIGHT
DOME CAMERA SID-45C/46C
2. Instruction Manual
Pan Base
You can rotate the lens from 340˚
3. M3 Tapping Screws 4EA
PCB Front Cover
Tilt Base
You can adjust up and down the camera(30°~90°).
Funtion Setting Button
SETUP button : Used for the menu display.
Conform the status of the selected function.
4. Bracket
LEFT & RIGHT button: Used when changing item values, by moving the cursor
to the left or right on the menu screen.
UP & DOWN button: Used for selecting items by moving the cursor Up or
down on the menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
10
11
Nam e and Func tio n o f Eac h Part
In s ta lla tio n
Installing Camera
B A C K
1. Fix the Bracket to suitable position where the camera will be installed.
2. After inserting the Bracket pin to camera hole, rotate the camera right.
3. After adjusting the camera, cover the Dome-Cover.
BRACKET
BRACKET PIN
BRACKET PIN
An arrow for
installing direction
Screw
Screw
Hole
Hole
Groove for fixing camera
Power input jack
BNC Jack
Notes
Please locate an arrow for installing direction that you wish to observe Area and then
fix four screws.
Cable guide hole
When the camera is installing on the ceiling, put the POWER & BNC JACK into
the cable guide hole.
•If you want to separate the Dome-Cover, Position
the Hook between printed characters ‘SSID-45C
/46C’ (model name) following the illustration.
HOOK
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
12
13
In s ta lla tio n
Connecting to a Monitor
Connecting to Power
Please connect the video output terminal located on the back of the camera to the
monitor.
Connect the adaptor to the power input connector as shown in the figure below.
The recommended adaptor specification for SID-45CN/CP, SID-46CN/CP is DC 12V,
500mA .
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
DC Power Type (DC 12V, 500mA)
• Please turn off the power when connecting.
Adaptor
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set
and select 75Ω for the Intermediate device as shown in the picture below.
Intermediate
Monitor
DOME Camera
Power Input Connector
When the resistance value of copper wire is at [20°C(68°F)]
2
2
2
2
DOME Camera
BNC
Copper wire size (AWG)
Resistance (Ω / m)
Voltage Drop (V/m)
#24(0.22mm )
#22(0.33mm )
#20(0.52mm )
#18(0.83mm )
0.078
0.028
0.050
0.018
0.030
0.011
0.018
0.006
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the
camera may affect the performance of the camera.
*Standard voltage for camera operation : DC 12V±10%
*There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
Notes
• Adaptor isn’t offer to accessory.
• Please check the polarity of the DC power source before connecting to power.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
14
15
Cam era Op eratio n
In s ta lla tio n
Panning & Tilting Control
Menu
You can adjust the Panning and Tilting angle freely. (Panning angle: 0˚ to 340˚,
Tilting angle: 30˚~90˚)
SETUP menu
1. Adjustment Panning angle:
After attaching the dome camera to ceiling, adjust the panning angle for better
monitoring area by rotating the Pan Base.
SHUTTER
(condition and speed control)
• ESC
• MANUAL
• FLK
The panning angle can be adjusted to 0˚ from 340˚ freely.
WHITE BALANCE control
• ATW
• AWC
• LOW
• MANUAL
• MIDDLE
2. Adjustment Tilting angle:
After attaching the dome camera to ceiling, adjust the tilting angle for better
monitoring area by rotating the Tilt Base.
BACKLIGHT
• OFF
The tilting angle can be adjusted to 30˚ from 90˚ freely. (based the ceiling
surface)
(Backlight compensation)
• HIGH
AGC (Auto Gain control)
SSNR
• OFF
• HIGH
• LOW
• LOW
• AUTO
• MIDDLE
• MIDDLE
Tilt Base
Pan Adjustment
You can rotate the lens
from 0˚ to 340˚.
You can adjust up and
down the camera.
(30˚~90˚)
• OFF
(Samsung super noise reduction) • HIGH
PAN BASE
SENS-UP (Low illuminance)
SPECIAL
• OFF
• CAMERA ID • COLOR
• SYNC
• PRIVACY
• MOTION DETECTION
• MIRROR
Notes
• SHARPNESS • RESET
• RETURN
•In case of adjusting the tilting, do not take the lens for preventing physical shocks.
Please take the Tilt Base.
•This dome camera is designed to installing on the cailing. In case of need to use
camera on the wall, because of the angel of attaching, the image can be turned
upside down. In this case, please installing the camera after manufacturing the
Bracket.
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
16
17
Cam era Op eratio n
Settings
Modes can be
changed using the
LEFT and RIGHT
buttons.
Select any function
you wish to operate
by using the UP and
DOWN buttons.
Settings can be made using the 5 buttons located on the inside of the camera.
SET button
LEFT button
DOWN button
UP button
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes
are displayed in order. Please keep pressing the button until you get to the
mode you wish to operate.
RIGHT button
1. Please press the SETUP button
•Settings can now be made. The SETUP menu is displayed on the monitor.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
Notes
•If
appears at the mode you wish to operate, it means that there is a sub-menu
which can be selected by pressing the SETUP button.
•If - - - appears at the mode item, it means that there is no mode available to be
selected.
SHUTTER (condition and speed control)
Auto or manual control can be selected.
1. When the SETUP menu is on the screen, please position the arrow to point
to 'SHUTTER' by using the DOWN button.
2. Please select any function you wish to activate by using the UP and DOWN
buttons.
• The arrow can be moved up or down by using the UP and DOWN buttons.
Please position the arrow to point to the function you wish to operate.
2. Please select the shutter mode by pressing the LEFT or RIGHT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
18
19
Cam era Op eratio n
FLK: Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency. NTSC Model:1/100, PAL
MODEL: 1/120
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button.
ESC: Auto control of the shutter speed can be achieved. When ESC mode is on, the
speed is controlled automatically according to the brightness of the screen.
MANUAL: The shutter speed can be controlled manually.
*Please select one of the 3 modes below.
ATW(Auto Tracking White Balance): This mode can be used within the color
temperature range 1,800°K ~ 10,500°K (Ex. fluorescent light, outdoor, sodium
vapor lamp or inside tunnels)
AWC(Auto White Balance Control): Please press the SETUP button while the
camera is directed at a piece of white paper to obtain the optimum state under
current illumination. If the environment including the light source is changed, you
have to adjust the white balance again.
3. Please select 'MANUAL' mode if you wish to adjust the shutter manually.
• You can select speed from ‘1/60’ to ‘1/120,000’sec (NTSC Models), ‘1/50’
to ‘1/120,000’sec (PAL Models).
4. Please press the SETUP button when all the settings are complete.
MANUAL: The manual adjustment mode enables finer adjustment.
Please select ATW or AWC first. Please change to manual adjustment mode and
press the SETUP button. Please set the appropriate color temperature, and then
increase or decrease the red and blue color values while monitoring the color
changes on the object.
Notes
•While using the internal synchronous system, if the shutter setting is on 'ESC' and
the camera is directly facing a bright fluorescent light, the image on the screen can
be adversely affected. Therefore please choose the installation location with care.
Notes
•When 'MANUAL' mode is on, the SENS UP function does not operate.
•Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWC mode.
When the object’s surroundings have a very high color temperature (Ex. a clear
sky and sunset)
WHITE BALANCE control
When the object’s surroundings are dark
If the camera directly faces a fluorescent light or is installed in a place where
there are considerable changes in illumination, the WHITE BALANCE function
may become unstable.
The screen color can be adjusted by using the WHITE BALANCE function.
1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by
using the UP and DOWN buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
20
21
Cam era Op eratio n
AGC (Auto Gain Control)
BACKLIGHT (Backlight Compensation)
When there is a strong backlight behind the object, clear images of the background
as well as the object can still be obtained by using the BACKLIGHT function.
1. Please position the arrow to point to 'AGC' on the SETUP menu by using the
UP and DOWN buttons.
1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button. As the level of gain increases, the screen gets brighter and the level
of noise also increases.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button.
HIGH: The gain increases or decreases within the range of 6dB ~ 34dB.
MIDDLE: The gain increases or decreases within the range of 6dB ~ 30dB.
LOW: The gain increases or decreases within the range of 6dB ~ 18dB.
OFF: The gain is fixed at 6dB.
HIGH/MIDDLE/LOW: You can adjust the sensitivity of Backlight Compensation.
OFF: BACKLIGHT function does not operate.
3. Please press the SETUP button. The BRIGHTNESS can be adjusted within the
range of 1~70.
BACKLIGHT ON
BACKLIGHT OFF
4. Please press the SETUP button when all the settings are complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
22
23
Cam era Op eratio n
1. Please position the arrow to point to 'SENS UP' on the SETUP menu by using
the UP and DOWN buttons.
SSNR (Samsung Super Noise reduction)
The background noise in the low light level decreases automatically as the level
of gain changes.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button.
1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the
UP and DOWN buttons.
AUTO: Low light level auto mode
OFF: The function does not operate.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
Notes
• When SHUTTER is in the manual mode, SENS UP does not operate.
• When AGC is turned off, SENS UP does not operate.
OFF: There is no reduction in noise level.
LOW: There is a small reduction in noise level with almost no ghost image.
MIDDLE: The most effective mode. There is a sufficient reduction in noise levels
without causing much ghost imaging.
HIGH: The level of noise is reduced greatly, however there is an increase in ghost
imaging.
3. Please press the SETUP button when all the settings are complete.
Notes
Notes
• When AGC is turned off, SSNR does not operate.
•The maximum storage magnification in low light level can be adjusted by pressing
the SETUP button in 'AUTO' mode.(X2~X128)
•As the magnification increases, the screen gets brighter; moving object gets more
afterimage.
SENS UP (Low illuminance)
•If storage magnification is increased while SENS UP is operating, it may cause noise,
and spots may appear; however this is normal.
SENS UP helps maintain a bright, clear screen image by automatically detecting
changes in the level of light in low light level conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
24
25
Cam era Op eratio n
3) Please press the SETUP button.
SPECIAL
Camera ID
1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using
the UP and DOWN buttons.
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
2. Please select the mode you wish to operate by pressing the UP or DOWN
button.
-.
123456789
CLR POS END
4) Up to 15 letters can be used for the ID.
Please move the cursor to the letter you wish to choose by using the UP and
DOWN button.
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.
123456789
CLR POS END
CAMERA ID: If the ID is input, the camera ID appears on the monitor.
1) Please position the arrow to point to 'CAMERA ID' by using the UP or DOWN
button.
Select an ID from A, B~Y, Z, a, b~y, z, 0,1~8, 9 by using the UP, DOWN, LEFT
and RIGHT buttons.
Please lock in the letters by using the SETUP button.
• When the letter is locked in, the cursor moves to the next space.
2) Please select 'ON' by pressing the LEFT or RIGHT button.
Notes
Please repeat the above to input the ID.
•If 'OFF' is selected, the ID does not appear
on the monitor even if it has been input.
Notes
•If the wrong name has been input.....
If you press the SETUP button after moving the cursor to CLR, all the letters will be
erased. If you want to correct a letter, please move the cursor to the arrow at the
bottom left of the screen and press 'SET'.Please position the cursor above the letter
you wish to correct, and then move the cursor onto the letter you wish to choose
and press the SETUP button.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
26
27
Cam era Op eratio n
5) When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
Notes
•If AGC is OFF, you can’t select AUTO mode.
Camera ID
•When an infrared light is used, there may be a problem with focusing and COLOR
(DAY & NIGHT).
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.
123456789
CLR POS END
SYNC : In LINE-LOCK mode, it synchronizes the video signal between cameras
without a synchronous generator.
- INT : Internal synchronization - LL : External line-lock synchronization
• If you choose ‘LL’, you can adjust the desired phase.
Press the SET button.
The name will appear at the top left hand
corner.
FRONT DOOR
• You can adjust the desired phase from 0 to 359.
to Locate, then SET
Notes
FRONT DOOR
•'Sync' mode is fixed ‘INT’ in DC 12V input power.
Please find the position you wish to display
the name by using the 4 directional buttons,
and then press the SETUP button.
MOTION DETECTION:
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words 'MOTION DETECTED' appear on the
screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object's movement by sensing disparity
of outline, and level of brightness and color.
6) Please select 'END' and then press the SETUP button to complete ID input.
• Please press the SETUP button.
COLOR (Electronic DAY & NIGHT)
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
- AUTO: This camera has a function which electronically changes to the appropriate
mode for daytime or night-time. The COLOR mode is operated for daytime,
and it converts to BW mode for night-time.
• Please select the area you wish to observe from the 4 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
- ON: The color mode is selected electronically.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
28
29
Cam era Op eratio n
• Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or
RIGHT button.
MIRROR
- ON : Sets a horizontal image inversion.
- OFF : Cancels the inversion.
MIRROR ON
MIRROR OFF
• Please press the SETUP button to save the changes and complete the setting.
SHARPNESS: The outline of the video image becomes cleaner and more distinctive
as the level of SHARPNESS increases. If the level goes up excessively,
however, it may affect the video image and generate noise.
Notes
•'MD' is on screen display only words.
• Please press the SETUP button.
PRIVACY: This modes conceals the areas you do not wish to appear on the screen.
- OFF : Cancels the PRIVACY mode.
- ON : Operates the PRIVACY mode.
• Please press the SETUP button.
• The available range of level is 0 ~ 31.
RESET: Returns to the level which was set by the manufacturer for shipment.
RETURN: Returns to the SETUP menu.
• Please select the area you do not wish to appear from the 4 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
EXIT
• Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT or
RIGHT button.
Saves all the setting menus and then exits.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
30
31
Tro ub lesho o ting
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem
The MOTION
DETECTION function
is not working.
Solution
• Please check if 'MOTION DETECTION' mode is
turned on.
Problem
Solution
• Please check if the MD LEVEL is too low.
• Please check the setting of the MD AREA.
Nothing appears on
the screen.
• Please check the power connection.
• Please check the video signal line connection.
• Please check the Brightness of Auto Iris lens.
• Please check the 'WHITE BAL' setting. (Please refer
to page 20)
Colors are not quite
right.
• Please check if the lens is clean. Please clean the
lens with a clean cloth or brush.
The video image is
not clear.
The screen is flickering.
• Please check if the camera is facing directly into
sunlight or fluorescent light.
• Please adjust the contrast feature of the monitor.
• Please make sure that the screen is not exposed
directly to a bright light. Please move the camera if
necessary.
L/L mode isn't able to
be selected.
• When using DC 12V input power, ‘Sync’ mode is
fixed to ‘INT’.
• Please check if the AGC menu is set to the OFF
position.
COLOR (DAY & NIGHT)
mode is not working.
The screen is dark.
• Please adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/
Hi-z properly, and check the terminals. (refer to
page 14)
SENS-UP function is
not working.
• Please check if the AGC menu is set to the OFF
position.
• Please check if the SHUTTER menu is set to
MANUAL mode.
There is a problem with
the camera operation.
The camera surface is
too hot and black
stripes appear on the
screen.
• Please check if an appropriate power source to the
camera complies with the manufacturer's standard
requirement, or if the voltage keeps changing.
• Please check the limit of Sens-UP AUTO mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
32
33
Specifications
Dimension
ITEM
SID-45CN
SID-46CN
SID-45CP
SID-46CP
Input Voltage
Power Consumption
Sensor
DC 12V 10%
Max. 1.8W
1/3 inch, Sony Super HAD CCD
POWER
C
C
D
Total Pixels
811(H) x 508(V)
768(H) x 494(V)
795(H) x 596(V)
752(H) x 582(V)
Effective Pixels
Scanning System
Synchronization
Frequency
2:1 Interlace
Internal
S
y
n
c.
H : 15.734KHz / V : 59.94 Hz
Fixed Lens Fixed Lens
f=3.7mm, F2.0, f=8.0mm, F2.0, f=3.7mm, F2.0, f=8.0mm, F2.0,
92˚ 40˚ 92˚ 40˚
H : 15.625KHz / V : 50.00 Hz
Fixed Lens
Fixed Lens
LENS(Built-in)
Video Output
1.0Vp-p/75Ω
(Video 0.714Vp-p Sync 0.286Vp-p)
530 Lines(Color)
1.0Vp-p/75Ω
(Video 0.7 Vp-p Sync 0.3 Vp-p)
Resolution
S/N (Y signal)
50 dB
Min. Illumination
Back Light Compensation
COLOR (DAY&NIGHT)
Gain Control
White Balance
Electronic shutter speed
0.3 Lux @ F1.2, 0.002Lux(Sens-upX128)
LOW/MIDDLE/HIGH/OFF Selectable
ON/AUTO(Daytime : COLOR, Night time : B/W)
LOW/MIDDLEL/HIGH/OFF Selectable
ATW (1,800K~10,500K)/AWC/MANUAL
E
L
E
C
T
R
I
AUTO (1/60 ~ 1/120,000sec) /
AUTO(1/50 ~ 1/120,000sec) /
MANUAL: (X128 ~ X2,1/60 ~ 1/120K) / Flickerless
MANUAL : (X128 ~ X2,1/50 ~ 1/120K) / Flickerless
C
A
L
Sens-Up
O.S.D
AUTO/OFF(selectable limit X2~X128)
Built-in
Motion Detection
SSNR
Mirror
Privacy
Sharpness
ON/OFF 4 Programmable Zone)
LOW/MIDDLE/HIGH/OFF Selectable
ON/OFF (Horizontal Image Inversion)
ON/OFF (4 Programmable Zone)
ON/OFF (Level Adjustable)
Manual 0˚ ~ 340˚
Monitoring PAN
Angle TILT
Manual 30˚ ~ 90˚
Operating Temperature/Humidity
Dimension
-10˚C to +50˚C / 30% to 80% RH
Ø108 x 80mm(H)
Weight
210g
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DOME CAMERA
User’s Manual
COLOR DOME CAMERA
User’s Manual
35
34
DECLARATION OF CONFORMITY
M E M O
Application of Council Directive(s)
89 / 336 / EEC
Manufacturer's Name
Manufacturer's Address
SAMSUNG TECHWIN CO., LTD
SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-120
European Representative Name
European Representative Address
Equipment Type/Environment
Model Name
CCTV Camera
SID-45CP
Beginning Serial NO.
S6700001
Year of Manufacture
2006. 7. 1
Conformance to
EN 50081-1 : 1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4 : 1996
We, the undersigned, hereby declare that the equipment specified above conforms
to the above Directive(s).
Manufacturer SAMSUNG TECHWIN CO., LTD
Signature
Legal Representative in Europe
Signature
Full Name
Position
Place
Full Name
Position
Place
YOUNG TAEK SON
QUALITY CONTROL MANAGER
CHANGWON, KOREA
2006. 7. 1
Date
Date
Download from Www.Somanuals.com. All Manuals Search And Download.
M E M O
M E M O
Download from Www.Somanuals.com. All Manuals Search And Download.
|